Search dance music

Notes: A fine felt slipmat containing carbon fibre designed to minimise static by discharging the record during play and enable dust particles to brush off easily afterwards. Pack of two.

Notes: Specially formulated anti static stylus cleaning fluid safely cleans thoroughly without leaving residue or static to maintain stylus response. With built in applicator brush for precise application. 20ml.

Notes: Keep your vinyl collection in pristine condition with this specially designed antistatic brush. Designed to clear the fine grooves of dust & fluff without damaging the delicate playing surfaces, an essential requirement for maintaining optimum reproduction quality.

Notes: The Acc Sees velvet antistatic vinyl brush cleans away dirt & grease while reducing static build up. This helps to improve sound reproduction quality and prolong the life expectancy of vinyl discs.

Notes: Specially formulated record cleaning fluid to deeply clean between vinyl grooves and help prolong the life of the vinyl surface. Dries to eliminate static without smears. Microfibre lint free cloth supplied in lid. 250ml.

Notes: DJ-friendly version of AIAIAI's excellent modular headphones. Configured here with punchy S02 drivers, on-ear PU leather earpads and coiled cable.

Supplier's notes:
TMA-2 DJ has been put to the test on stages all over the world. With its reinforced headband and powerful bass, it's a specialized piece of equipment for the hardworking musician.


The titanium-coated S02 speaker unit delivers a punchy and intense sound representation focused on bass and low-end dynamics. Combining the durable H02 nylon headband and the E02 on-ear PU leather earpads providing high isolation results in a powerful sturdy headphone suitable for live performance and electronic/bass heavy music.



In the Box.

S02 Speaker unit: Punchy.

E02 Earpads: PU leather, on-ear.

H02 Headband: Nylon, Silicone padding

C02 Cable: Coiled w/adaptor, black, 4 mm, 1.5 m.



Technical Specifications.

Driver diameter: 40 mm

SPL: 117 dB

Resonance frequency: 90 Hz

Impedance: 32 Ohm

Rated power: 30 mW

Max power: 70 mW

Diaphragm material: Titanium Coated

Magnet type: Neodymium

Notes: The Allen & Heath cross fader is the official replacement part from Allen & Heath, which fits the cross fader of the Xone:22 model.

Notes: A&H's excellent Xone:23 mixer gets tweaked for digital DJ software use and becomes the 23C. Clever solution with all the usual Xone sound quality plus a built-in audio interface. Slick.

Supplier notes:
The Xone:23C brings together the best of digital DJing and conventional mixing in a compact accessible format.

This high performance DJ mixer is equipped with a premium quality, 4 stereo channel 96kHz 24bit internal soundcard and offers plug n' play connection via X:LINK to Xone:K series controllers, making it perfect for performers looking to combine the convenience of digital DJing and recording with the hands-on control and visual appeal of a real mixer.

Xone:23C includes an enhanced version of the legendary Xone filter with resonance control, VCA faders, 3 band total kill EQ, illuminated switches, crossfader curve selector and styling inspired by the flagship Xone:DB4.

At the heart of the mixer is the renowned analogue Voltage Control Filter (VCF) system offering Low-Pass and High-Pass filters, frequency sweep and 'mild to wild' resonance control. There is also an FX loop to connect to third party FX units, which route back in through the filter system.

Xone:23C features 2+2 stereo channels with dual levels for phono and line inputs, allowing four music sources to be connected at the same time, including turntables and CD/media players. Additionally, the internal soundcard enables replay and recording from DJ software, offering users all the benefits of digital DJing whilst using hands-on mixer controls.

The main mix output and mic input are on professional standard balanced XLR's, and there is a dedicated record output. The Xone:23C is equipped with comprehensive monitoring facilities, including a dedicated booth output with its own volume control, a cue mix control, and signal levels clearly displayed on the 9 segment peak hold meters.

Styled on the flagship Xone:DB4, the Xone:23C includes soft touch, backlit controls, light-piped meters and a distinctive new shaped steel faceplate. The mixer can also be upgraded with the latest Innofader for enhanced scratch performance, available as an accessory.

Xone:23C comes with Mixvibes Cross LE Software, providing DVS control and plug n'play mapping for Xone:K series controllers.

Notes: Mid-range DJ mixer from the leading UK brand. Fully analogue four-channel design with A&H's much-loved Xone filter section. Very tempting alternative to the flagship Xone:96. Excellent value.

Supplier notes:
Created for DJs and electronic music purists, Xone:43 is a 4+1 channel DJ mixer that offers the very best of analogue audio quality, including the legendary Xone filter with resonance control, 3 band EQ, crossfader with three curve settings and X:FX for send/return to your favourite FX unit.

The crossfader has three switchable curve settings for blending or scratching styles and can be easily replaced or upgraded to a custom Innofader for ultimate crossfader performance.

With balanced XLR main outputs, independent booth and record outputs, Xone:43 excels in the club and in high end personal DJ setups.

Notes: Still a classic, still a brilliant mixer. Nearly 20 years on the market but sounding just as good as ever, the Xone:92 seems like a bit of a bargain now.

Supplier's Notes:
The industry-standard Xone:92 is a versatile six channel analogue mixer, renowned for its expansive, involving sound. With its solid construction and easy to use interface, the 92 is on the riders of most of the world's top DJs and is a permanent fixture in the booth at many of the biggest superclubs.

The Xone:92 was one of the first professional DJ mixers to incorporate MIDI for control of DJ software or external devices, and the first to include the innovative dual VCF filters. With its two stereo FX sends, twin Mic/returns, and one of the best EQ sections around, this mixer is a DJ's dream tool.

For those who prefer to blend with rotary faders the Xone:92R is also available.

Notes: Replacement front panel for the Allen & Heath XONE:92 DJ mixer.

Notes: Neatly designed slimline DJ MIDI controller from A&H. 52 controls and built-in audio interface. Compatible with any DJ software.

Supplier's notes:
Xone:K2 is a compact, slim line universal MIDI controller - incorporating a 4 channel soundcard, for use with any DJ software.

With no fewer than 52 hardware controls providing up to 171 MIDI commands across 3 layers - plus the ability to link multiple units using X:LINK, saving USB ports on your computer - Xone:K2 has the power and flexibility to put you in touch with the functions and features of your chosen software.

Quick and simple mapping lets you create a unique layout that mirrors your style and puts the functions that matter at your fingertips, whilst 3 colour illuminating switches give at-a-glance feedback - allowing you to work however you decide.

The high quality internal soundcard provides flexible user setup options using the Xone:K2 with headphones, headphones and a mix system or with an external mixer. Xone:K2 comes packed in a black padded case as standard. The case doubles as a stand, bringing the K2 up to the same height as most pro DJ mixers.

Xone:K2 is a compact designed MIDI Controller for use with any DJ software such as Ableton, Virtual DJ, MixVibes, Mixx and Traktor Pro. Xone:K2 can even be used to control lights or VJ software - if it can receive MIDI data it can take commands from K2. What each control does is entirely up to you - you can create a completely customised layout that perfectly fits the way you want to work. Xone:K2 has 52 physical controls - including 12 analogue and 6 endless rotary encoders with push switch, 4 linear faders, and 30 backlit performance switches - providing up to 171 MIDI control commands across 3 layers. We also provide example maps to get you started out the box and information on how to set up your own.

A Latching Layers system lets you assign controls to multiple layers, so a single physical control can be given up to 3 functions. You can configure all, some or none of K2's controls to be linked to the Latching Layers system. As a quick visual reminder, when toggling through layers all switches assigned to a particular layer will illuminate in the appropriate colour.

Xone:K2 has a high quality internal, four channel (2 stereo) 48kHz soundcard. Setup options include using the K2 with a pair of headphones, feeding a pair of headphones and a PA system, or connecting to an external DJ mixer.

Its slim line chassis, soft touch controls and minimal looks set K2 apart from the pack. There's plenty of substance too - Xone:K2 is built to Allen & Heath's renowned touring grade audio and build quality standards, including the use of steel nuts on all rotary controls to protect the circuitry from impact damage.

Xone:K2 comes packed in a black padded case as standard. As well as keeping it safe on the road, the case doubles as a stand, elevating the K2 up to the same height as most pro DJ mixers.

Two or more K2s can be linked via our X:LINK protocol, expanding the control capability. X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, including Xone:DB4 and DB2, to expand MIDI data without using additional USB ports.

Notes: Users can adjust the crossover point to choose which frequency ranges of "LOW", "MID" and "HIGH" should be emphasized for their preferences and music genres.

Maximum Boost 12dB provides the users to be well aware of changes and is good for protection of speaker systems.

Volume curve is designed with insistence on quick attack and sharp response.

Its simplified design minimizing all possible sound degradation.

ARS MODEL-3500 provides superior controls for DJs to react to each different scenarios, giving more characteristics to their performance.

Supplied with UK 3 pin plug

Notes: Drain the static charge from your records and lift any residual dust and grime with the anti-static vinyl brush.
The conductivity of the brush's carbon fibre bristles eliminates static charges while gently and efficiently removing the dust, grit and particles that bung up your vinyl's grooves and degrade your record's sound.
The conductive carbon fibres reach deep into the grooves of your vinyl to remove even the smallest particles, leaving your records clean while prolonging the life of vinyl and stylus.

- Hand-made carbon hair brush for removing dust from vinyl records
- The brush makes the record antistatic so it does not attract dust
- For those who care for their collection of vintage or brand new vinyl records
- Can also be used for Schellack records

Notes: Adds weight to the record to both stabilise uneven records and steady rotation speed.

Doubles as centrepiece for singles.

The record weight gives you:

- Smoother, richer tonal balance
- Increased dynamic range
- Vast improvement in overall soundstage clarity and instrumental definition
- Improved bass response
- Substantial reduction in vinyl noise floor
- Increased vinyl longevity

Notes: AM's carbon fibre brush removes static charges from the stylus. For cleaning the pick-up, run the brush along the cantilever in the direction of the stylus. Unlike other pick-up brushes on the market that claim to be made with carbon fibre, this one actually is.

Eliminate dust, dirt and static build-up from your record player's stylus with the Pickup brush.

The conductivity of the brush's carbon fibre bristles helps to drain static charge from the stylus and lift any residual dust and grime.

Maintain your stylus, improve audio fidelity and lengthen the life of your records.

Notes: - 200ml cleaning fluid for efficient and gentle cleaning of vinyl records

- Soft cloth included

- Unaltered care and maintenance for records since 1971

- Must not be used for Schellack records

Notes: Compact phono stage to boost turntable output to line level. Add turntable inputs or upgrade the sound of your DJ mixer. Adjustable capacitance and gain to suit a range of cartridges.

Supplier's notes:
The DJ PRE II acts as an interface between your turntable and your audio recording/playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card. Housed in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package.

Notes: The Pro Tools is back and this time Avid did something Ask Video never thought would happen. You can now use nearly any audio interface you like to work in Pro Tools. This opens up the program to many new users and we want to make sure you're up to speed.

In Level 1 of this 3 part series Ask Video are going to take you through everything you need to know to get started. Ask Video are going to start right at the beginning by getting your audio card setup and taking a tour of the Edit and Mix windows. After that Ask Video will move into recording and editing, and finish up with a few chapters on some of the instruments in Pro Tools.

If you're new to Pro Tools than this tutorial is perfect. It's also great for those of you coming back to the program now that you can use any interface you like. Watching Level 1 is a great way to refresh yourself.

QuickTime 7.x Mac/PC is required for video playback. DVD-Rom drive required for Mac/PC DVD-ROM.

Notes: The Pro Tools is back and this time Avid did something Ask Video never thought would happen. You can now use nearly any audio interface you like to work in Pro Tools. This opens up the program to many new users and we want to make sure you're up to speed.

In Level 2 of this 3 part series Ask Video are going to build on the principles and techniques learned in Level 1 and start looking at some of Pro Tools' advanced features. Ask Video are going to introduce you to the advanced recording techniques, delve deeper into audio editing and mixing, and finish up by taking a look at Structure and Vacuum.

This tutorial is great for Pro Tools users that feel like they've got the basics down and are ready to learn something new.

QuickTime 7.x Mac/PC is required for video playback. DVD-Rom drive is required for Mac/PC DVD-ROM.

Notes: The Audio Anatomy Vinyl-Inner Sleeves are an indispensable accessory for any vinyl collector. Made in Germany, the interior consists of an antistatic foil lining (low density polyethylene) and the exterior is of paper. The paper has a die-cut centre hole on both sides and corresponds to the universal size of the 12? record. The Audio Anatomy Vinyl-Inner Sleeves provide easy and efficient protection against dust, fingerprints and moisture, resulting in improved sound quality and increased longevity of your vinyl records. To keep your vinyl records clean, we recommend cleaning them regularly with Audio Anatomy Cleaning Brushes and Audio Anatomy Cleaning Cloths.

- Antistatic foil lining
- Die-cut centre hole on both sides
- Universal size for 12" vinyl records
- Produced in Germany

Notes: The Audio Anatomy Vinyl-Inner Sleeves are an indispensable accessory for any vinyl collector. Made in Germany, the interior consists of an antistatic foil lining (low density polyethylene) and the exterior is of paper. The paper has a die-cut centre hole on both sides and corresponds to the universal size of the 12? record. The Audio Anatomy Vinyl-Inner Sleeves provide easy and efficient protection against dust, fingerprints and moisture, resulting in improved sound quality and increased longevity of your vinyl records. To keep your vinyl records clean, we recommend cleaning them regularly with Audio Anatomy Cleaning Brushes and Audio Anatomy Cleaning Cloths.

- Antistatic foil lining
- Die-cut centre hole on both sides
- Universal size for 12" vinyl records
- Produced in Germany

Notes: A revised version of the classic velvet brush, carefully cleans dust off vinyl records and ensures static-free playback. Its original contour shape makes it easy to handle. Suitable for dry or wet cleaning.

Notes: Excellent for the removal of dust and particles from the vinyl record surfaces. The fluid is alcohol-free and is also safe for older vinyl records too. The cloth is the perfect combination for first round wet cleaning or daily care. Audio Anatomy Vinyl Cleaner kit sports a great package concept which keeps the microfiber cloth always at hand.

Notes: The Innofader Pro2 is the ultimate replacement audio fader. It gives you an ultra precise i 0.05mm cut-in accuracy for even tighter control of your scratches. Separate left and right cut controls make it easy to adjust without the need to recalibrate. And for the perfectionist in you, it even has super precise presets which allow you to do things like shift the cut point by a mere 0.04mm, less than even the thickness of your hair.

Thanks to the feedback of customers like yourself, the Pro2 now fits more mixers than ever, all without modification. The adapter boards are already insulated and marked clearly to show you the specific one you need for your mixer.

To take advantage of all of the Innofader Pro2 adjustability, we recommend you purchase an Innojuster. This allows you to access Innofader Pro2 control dials plus the calibration button from outside the mixer.

Notes: The mini Innofader Plus is the new upgrade part which will replace the mini Innofader PNP P. The cut point has 0.1mm precision combined with a lightning fast 1msec response time. And now you can hook it up to an innoJUSTER to ensure you get the hairline precision cut point exactly where you want it on the fly!

The installation process is now greatly simplified. Low profile connectors ensure that you do not have to worry about breaking any cables. The button is now easier to press. And the adjustments now can be done with simpler swipe movements.

Notes: Superb value for money with this hugely popular model from the ever-reliable Audio-Technica. A little smaller and a lot cheaper than the excellent M50X model, but with similarly clear, balanced performance.

Supplier's Notes:

The high-performance ATH-M40x professional headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range.

Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.

This product includes interchangeable coiled and straight cables, a carry pouch and a 1/4" jack adapter for universal compatibility.

Notes: There are lots of good reasons why these are some of the most popular studio headphones on the market. Clear sound, comfortable and good isolation. Perennial favourites from Japanese headphone specialists Audio-Technica.

Supplier's notes:
This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year.

The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables.

From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

This product includes interchangeable coiled and straight cables, a carry pouch and a 1/4" jack adapter for universal compatibility.

Notes: Replacement stylus for VM670SP

VMN70SP Replacement stylus for VM670SP. Conical (3mil) stylus, Nude Rectangular Shank construction in grey

Features

Even the finest diamond stylus becomes worn after an extended period of play.The styli in our VM cartridges are no different. But it is easy to replace the stylus and continue to use your cartridge. Our renewed VM cartridges have 7 styli and 3 types of bodies to choose from. Not only is it not necessary to buy an entirely new cartridge, but you can also enjoy the experience of upgrading your stylus or trying a new cartridge/stylus combination.

Notes: Phono (RCA) stereo audio cable, pair of male phono to pair of mono 6.3mm jack plugs.

Notes: Designed to connect between two pieces of audio equipment that have a ground loop problem.

Length - 60cm

Notes: 3.5mm stereo jack plug to 2 x RCA phono plugs.

A 3.5mm Stereo jack plug to two RCA phono plugs for stereo connection with screened audio cable.

Notes: Standard audio lead with 3.5mm stereo jack plug to two 6.3mm mono jack plugs. Ideal for mixer audio input; splitting stereo signal into left and right mono signal.

Notes: A 3.5mm stereo plug to plug lead with screened audio cable. For use in connecting MP3, Laptop or personal CD players to Speakers or Hi-Fi's.

Notes: Standard 3.5mm stereo plug to 3.5mm stereo socket lead, ideal for extension purposes on the majority of modern audio devices and PCs.

Notes: Standard 3.5mm stereo plug to two RCA plugs lead. Ideal for connecting personal music players to line inputs.

Notes: Pack of 50 x 10" record sleeves.

Notes: Polylined White Paper Record Sleeves for 7" records (Pack of 10).

Notes: This black paper inner sleeve fits directly over the record.

Notes: A pack of 10 brown paper inner sleeves fits directly over 12" record.

Notes: A pack of 25 brown paper inner sleeves fits directly over 12" record.

Notes: A pack of 50 brown paper inner sleeves fits directly over 12" record.

Notes: HD POLYETHYLENE & ACID-FREE PAPER

Fits directly over 12" LP records.

These High-Density Polyethylene (HDPE) sleeves are similar to the original "Rice-Paper" Sleeves. They are made from 3 layers of HDPE and 1 layer of acid-free paper which is sandwiched between 2 of the layers of HDPE. The acid-free paper neutralizes migrating acids as well as absorbs moisture. The HDPE resists static build up and protects against abrasion.

Notes: HD POLYETHYLENE & ACID-FREE PAPER

Fits directly over 12" LP records.

These High-Density Polyethylene (HDPE) sleeves are similar to the original "Rice-Paper" Sleeves. They are made from 3 layers of HDPE and 1 layer of acid-free paper which is sandwiched between 2 of the layers of HDPE. The acid-free paper neutralizes migrating acids as well as absorbs moisture. The HDPE resists static build up and protects against abrasion.

Notes: Gold(Yellow) paper 7" sleeves, pack of 10.

Notes: Carbon fiber cleaning brush. Use between wet cleanings.

This revolutionary brush is made up of over 1 million .06 mm diameter carbon fibers. Removes dust, dirt and neutralizes static.