Search dance music

Notes: The Triple Waveshaper (TWS) is a non-linear modifier which can transform a sawtooth wave into a sine wave. This classic module incorporates three independent waveshapers for modifying synthesizer waveforms or for processing signals from preamplified instruments. Although originally designed as a waveshaper for early Serge oscillators, this module has been found to be a excellent modifier of electronic and acoustic sounds, and is highly recommended for subtle timbral modifications beyond the range of simple oscillator/filter patches.

The R*S version extends the classic TWS concept:

+1: An additional (4th) waveshaper has been added (right after the first / bottom waveshaper) that can be dialed in smoothly using the +1 knob. Turned down (CCW) the bottom section acts as in the original (as if that additional waveshaper would not exist). Turned up (CW) the bottom section is actually 2 waveshapers in series.

Switches to link the 3 sections - bottom to top. Using these switches all sections can be set to act in series, starting at the bottom and ending at the top, providing the combined effect of 3 to 4 waveshapers (or anything in between) using the +1 knob.

Linking only the middle and top section and turning the +1 knob up (to have 2 sections in the bottom) allows you to use the module for isntance as two independent 2-stage waveshapers (using bottom in and out for one and middle in and top out for the other) - e.g. for stereo processing.

Notes: The RESONANT EQUALIZER (EQ) is a unique ten-band filter designed specifically for electronic sound synthesis and processing. Except for the top and bottom frequency bands, the bands are spaced at an interval of a major seventh. The Resonant Equalizer is designed to produce formant peaks and valleys similar to those in acoustic insstruments.

There are three equalized outputs: the two COMB outputs provide the sums of the two alternate filter bands, while the two top outputs are the (identical) mix of all filter bands. Please note that there is no sharp separation between the bands, moving any frequency knob will have an influence on both COMB outputs. This equalizer is special in that the bands can be set to be resonant: when the knobs are in the middle position, the response at the main EQ Output is flat. When the knobs are positioned between the 9 and 3 o'clock position, up to 12 db of boost or cut is set at the band. If the knob is set beyond the 3 o'clock position, the band will become resonant, simulating the natural resonance of acoustic instrument formant structures. Below the 9 o'clock position, increased band rejection is achieved.

The Random*Source version of the filter is a licensed and authorized adaption of the legendary Serge equalizer for Eurorack. It adds an input mixer with 2 inputs that can be built/used to attenuate or amplify/distort the input signal(s) before they are sent into the EQ and a Feedback section (knob and phase switch) which allows to feed back the output signal or the inverted output signal (depending on the Phase switch). Adding inverted feedback leads to phase cancellation effects - unlike the "normal" feedback, level decreases and the signal thins out.

Notes: The "uMCLK Divider" module can either work as a MIDI clock divider or as an analog clock divider. The divider outputs are assigned differently in both operating modes.

After receiving a MIDI start command, the module works as a MIDI clock divider. There are fixed dividers on 11 outputs. Via the divider output KEYS, triggers can be triggered and mixed via MIDI notes. The keyboard zone extends over three octaves. With the help of the LEARN key, the receive MIDI channel and the lowest note of this 3-octave range can be defined.

When stopped (i.e. after receiving a MIDI stop command or after switching on), the module works as an analog clock divider and divides the analog clock present at the CLOCK input. The 12 analog divider outputs can be reprogrammed via SYSEX. Ready-made SYSEX files are already available (e.g. for even / odd dividers, Fibonacci series, offbeats, etc.). The RESET input resets the analog counters or serves to deactivate the analog divider.

Connections:
- Ribbon cable adapter for Doepfer bus +/-12Volt
- Inputs: 2x Clock/Gate,Reset (0/+5..10V), 1/8th inch mono jacks
- 1x MIDI (TRS-B standard) 1/8th inch stereo jack Outputs: 1x MIDI (TRS-B standard) 1/8th inch stereo jack
- 14x Clock/Gate Divider, 1/8th inch mono jacks

Control elements:
- 1 push button with LED (LEARN key) 16 LED's
- Current consumption: max. +70..80mA / - 0 mA
- Size: Euro rack format 3U / 6HP 30x128,5x40 mm

Dimensions
5 HP
40 mm deep

Current Draw
80 mA +12V

Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Grey finish.

Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Red finish.

Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Green finish.

Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Yellow finish.

Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Retro style finish.

Notes: Custom ALM patch cables. Small but strong, they are designed for maximum ergonomic post modern wiggling.

- 90cm (Pack of 3 + ALM branded tie)
- Colour: White

Notes: We understand that podcasting is more than just recording audioiit's about creating engaging and professional content that captivates your audience. The Rodecaster Pro is designed to empower podcasters with its comprehensive set of features and intuitive controls, making it a true game-changer in the world of podcast production.

With the Rodecaster Pro, you have everything you need to produce a high-quality podcast. Its built-in mixer allows you to easily control and balance multiple audio sources, such as microphones, music, and sound effects. You can effortlessly adjust the volume levels, apply EQ and compression, and even add special effects to enhance your audio.

One of the standout features of the Rodecaster Pro is its versatile recording capabilities. It enables you to connect up to four microphones simultaneously, making it perfect for panel discussions, interviews, or multi-host podcasts. The Class A preamps ensure clean and clear audio capture, while the individual headphone outputs for each microphone input allow for seamless monitoring.

The Rodecaster Pro also offers seamless integration with your computer, allowing you to record directly to your preferred digital audio workstation (DAW). This gives you the flexibility to edit and fine-tune your recordings with your favorite software, ensuring a polished and professional final product.

Podcasters will appreciate the Rodecaster Pro's advanced sound processing features. It includes eight programmable sound pads that can be assigned with jingles, pre-recorded segments, or sound effects to add a touch of creativity to your podcast. You can also connect your smartphone via Bluetooth or a TRRS cable to incorporate phone interviews or remote guests seamlessly.

To ensure a smooth workflow, the Rodecaster Pro offers intuitive controls and a user-friendly interface. The large color touchscreen display provides easy access to various settings, allowing you to navigate menus, adjust settings, and monitor audio levels with just a few taps. The dedicated buttons and knobs provide quick and precise control over various parameters, minimizing the need for complex menu diving.

When it comes to connectivity, the Rodecaster Pro doesn't disappoint. It features multiple inputs and outputs, including XLR, TRS, and USB, offering versatility in connecting external devices such as instruments, audio interfaces, or additional sound sources. The USB output also enables direct streaming to popular platforms like YouTube, Twitch, or podcast hosting services.

With its robust construction and ergonomic design, the Rodecaster Pro is built to withstand the demands of regular podcasting use. However, to ensure its longevity and protect it from dust, liquid spills, and accidental impacts, the Decksaver cover is the ideal companion. It adds an extra layer of defense, preserving the pristine condition of your Rodecaster Pro and extending its lifespan.

Take your podcasting to new heights with the Rodecaster Pro and the reliable protection of the Decksaver cover. With these tools at your disposal, you can focus on creating remarkable content and delivering an immersive listening experience to your audience. Let your creativity flow freely, knowing that your Rodecaster Pro is well-protected and ready to bring your podcast to life.

Key features:

Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Shields vulnerable faders, switches and knobs during transportation.
Low profile design enables compatibility with most flight cases and travel bags.

Dimensions:

Weight 0.74 kg
Length 35.6 cm
Width 26.8 cm
Height 3.5 cm

Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good synth down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, your Volca can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage. This cover is designed for the Volca Drum, Volca Modular and Volca Mix which have a slightly different layout to the other Volcas.

Notes: dsp.cpoffee's custom everything-including-kitchen-sink dsp development platform.

At the core of this is an Electrosmith Daisy Patch Submodule, combined with a 12-bit 4 channel SPI DAC [DAC7554], and supporting hardware for more IO

Features
- 8x pots normalled to +5V
- 8x CV in breaks normalled connection and pot acts as an attenuator
- 2x gate in
- 2x gate out
- High-fidelity stereo in/out (Daisy Patch Submodule, using an WM8731 codec)
- 2x 12-bit CV out from Daisy Patch Submodule, scaled to -5v to 10v
- 4x 12-bit CV (or lofi audio w/ some hacking) from external DAC7554, scaled to -7v to 7v
- TRS MIDI in/out (in is auto-sensing for type a/b)
- SD card slot
- Expansion header for +5v, +3v3, SPI, UART, I2C, and USB connections

Notes: YYS is a super useful spin on the 4x2 matrix mixer. Instead of comparatively boring unipolar attenuators to send to the destination channels, attenuverters were used. This allows combinations of DC signals that can cancel each other out to make interesting new waveforms, and with audio signals can cause strange stereo cancellations. dsp.coffee also included inverted outputs and bipolar LEDs as a bonus.

Features:
- 4 inputs with 2 attenuverters to send to output A or B
- Inverted outputs that follow A / B
- Bipolar LEDs for monitoring

Notes: The Loupedeck Live S is an yet another innovative device that revolutionizes the way creators work with their digital tools. Whether you're a photographer, videographer, streamer or content creator, the Loupedeck Live S streamlines your workflow and enhances your creative process.

With a sleek and compact design, the Loupedeck Live S offers an impressive range of features, including customizable buttons, dials, and sliders that allow you to control your favorite software seamlessly. The device integrates with a range of applications, including Adobe Lightroom, Premiere Pro, and Photoshop, as well as other popular video and audio editing software.

To ensure that your Loupedeck Live S stays protected from the elements, Decksaver has created a custom-fit cover made from super-durable polycarbonate material. This cover is designed to protect your device against dust, spills, and accidental impacts, providing you with the peace of mind to focus on your creative work.

Not only does this cover offer superior protection, but it also adds a stylish touch to your workspace. Decksaver's team of experts has spent many hours researching and testing to ensure that their covers provide the highest degree of protection while maintaining the aesthetic appeal of your gear.

With a Decksaver cover for your Loupedeck Live S, you can keep your device in pristine condition, allowing you to stay focused on your creative vision without worrying about the safety of your equipment.

Get ready to take your creative workflow to the next level with the Loupedeck Live S and Decksaver!

Dimensions

Weight 0.15 kg
Length 15.3 cm
Width 8.9 cm
Height 3 cm

Material: Smoked clear polycarbonate.

Warning: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires, and sunlight

Notes: The Novation Launchkey 37 is a versatile and intuitive MIDI controller that is perfect for both beginners and experienced producers alike. Its 37 full-sized keys provide a responsive and expressive playing experience, while the eight rotary knobs and 16 velocity-sensitive pads allow for comprehensive and dynamic control over your music production software.

To ensure your MK3 Launchkey 37 stays in pristine condition, Decksaver have designed a custom-fit Decksaver cover that provides unparalleled protection from dust, liquids, and accidental damage. Decksaver's super-tough polycarbonate shell is lightweight yet incredibly durable, ensuring that your controller stays safe on the road, in the studio, or at home.

Decksaver's engineers have meticulously measured and designed the cover to fit perfectly over the Launchkey 37, ensuring that all buttons, knobs, and pads remain accessible while being shielded from harmful elements. With the Decksaver cover, you can focus on creating music without worrying about the safety of your controller.

Investing in the Novation Launchkey 37 is a significant step in your music production journey, and protecting it with a Decksaver cover is an essential measure to ensure it lasts for years to come. With this cover, you can rest easy knowing that your Launchkey 37 is safe and secure, ready to create music whenever inspiration strikes.

Fits:

FLkey 37
Launchkey 37 MK3

Dimensions:

Weight: 0.47 cm
Length: 56 cm
Width: 26.4 cm
Height: 4 cm

Material: Smoked clear polycarbonate.

Warning: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Novation has been pushing the boundaries of music technology for years, and their latest release, the Novation 49SL MK3, is no exception.

This powerful MIDI controller is packed with features that make it a must-have for any music producer or performer.

With its seamless integration with popular DAWs, including Ableton Live, Logic Pro X, and Pro Tools, the 49SL MK3 is a versatile tool that will enhance any studio or stage setup. Its 49 semi-weighted keys with after-touch provide a natural playing experience that will bring your music to life.

But as with any high-quality piece of equipment, it's essential to protect your investment from any potential damage. That's where this custom Decksaver cover comes in. Decksaver's team has spent countless hours researching and developing the perfect cover for the 49SL MK3, ensuring that it fits snugly and securely over the unit.

Made from ultra-durable polycarbonate material, this Decksaver cover provides exceptional protection against scratches, dust, and other harmful elements. The cover is also designed to allow access to all the important ports and buttons, so you won't have to remove it every time you want to use your controller.

Investing in a Novation 49SL MK3 is a potentially big decision, and protecting it should be a top priority.

With this Decksaver cover, you can safeguard your equipment and enjoy peace of mind knowing that your MIDI controller is safe and secure.

Whether you're on stage or in the studio, this cover will help you keep your focus on making great music, not on worrying about damaging your gear.

Weight: 1.5 kg
Length: 82.3cm
Width: 30.7cm
Height: 5cm

Material: Smoked clear polycarbonate.

Warning: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires, and sunlight.

Notes: The AKAI MPK Miniplay series are mega-popular with producers and beat-makers around the world and the latest version - the MK3 - is no different.

These wonderful devices pack a real punch despite its petite dimensions. With over 128 sounds and 10 drum kits, the MK3 allows you to explore and create a wide range of musical genres with your DAW of choice.

The compact and intuitive design of the MPK Miniplay MK3 makes it a perfect tool for the traveling musician or bedroom producer. Whether you're jamming with friends or creating beats on the go, this keyboard has everything you need to bring your ideas to life.

To ensure the protection of your Miniplay, Decksaver have designed a custom-fit cover made from super-durable polycarbonate plastic. Decksaver's design team has spent countless hours researching and testing to ensure that the MK3 cover provides the highest degree of protection against dust, debris, spills, and other potential hazards.

The Decksaver cover for the AKAI MPK Miniplay MK3 is the perfect accessory for any musician who values their equipment. Not only does it provide top-tier protection, but it also adds a sleek and professional look to your setup. With this cover, you can rest assured that your MPK Miniplay MK3 will stay safe and secure, allowing you to focus on making music without any worries.

This cover sits in Decksaver's LE range - still made from super durable polycarbonate but reaching you at a more affordable price.

Weight: 0.5 kg
Length: 32.4cm
Width: 18.1cm
Height: 2.5cm

Material: Smoked clear polycarbonate.

Warning: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Are you a synth enthusiast looking for the ultimate addition to your setup? Look no further than the Novation Summit - a powerhouse synthesizer that delivers unparalleled sound quality and versatility.

With 16-voice polyphony and dual-filter architecture, the Summit allows you to create rich, complex sounds that are both dynamic and expressive. And with its intuitive interface and advanced features, including dual stereo effects engines and an arpeggiator, the Summit is perfect for both studio production and live performance.

But with a piece of gear as valuable as the Novation Summit, it's essential to protect it from any potential damage. That's where Decksaver comes in! Decksaver's custom-moulded polycarbonate cover is specifically designed to fit the contours of the Summit, providing maximum protection against dust, spills, and accidental impacts.

Crafted from ultra-durable polycarbonate material, this Summit cover is super-tough yet lightweight, ensuring that your precious synth is always safeguarded without weighing you down. So whether you're transporting your Summit to a gig or storing it at home, you can rest easy knowing that it's protected by a Decksaver cover.

Investing in the Novation Summit is a big step for any musician, but protecting your investment is just as important. So why wait? Grab a Decksaver cover today and keep your Summit safe and sound!

Features Decksaver's own Soft-fit inserts to protect delicate wooden cheek panels.

Dimensions

Weight 1.65 kg
Length 101.5cm
Depth 31 cm
Height 5.5cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires, and sunlight.

Notes: Introducing the n-1 case, a sleek, thoughtfully designed Eurorack modular case for sound and music makers. This flat-packable case interlocks and slides together, requiring no tools to assemble. Later in the year, Null Modular will be launching a range of accessories that will provide further versatility to the n-1 case. These add-ons will allow you to customize your case to suit your unique preferences, ensuring it remains an adaptable companion on your evolving musical journey.

What's in the box?

12mm plywood frame
3mm plywood back
4 dowel pins
1 pair of aluminum rails
M5 hex socket screws
M3 rail slide nuts
mystery stickers!
*case is unpowered, giving users the freedom to choose a panel-mounted power supply or adapt an internal power option.

Notes: Introducing the n-1 case, a sleek, thoughtfully designed Eurorack modular case for sound and music makers. Our flat-packable case interlocks and slides together, requiring no tools to assemble. Later in the year, we will be launching a range of accessories that will provide further versatility to the n-1 case. These add-ons will allow you to customize your case to suit your unique preferences, ensuring it remains an adaptable companion on your evolving musical journey.

What's in the box?
12mm plywood frame
3mm plywood back
4 dowel pins
1 pair of aluminum rails
M5 hex socket screws
M3 rail slide nuts
mystery stickers!
*case is unpowered, giving users the freedom to choose a panel-mounted power supply or adapt an internal power option.

Notes: When it comes to modular synthesizers, the 4MS Pod64X is a game-changer.

Designed with the musician in mind, this compact and versatile case allows you to expand your modular system without compromising on portability.

With 64hp of space, the Pod64X can accommodate a variety of modules, giving you the freedom to create unique soundscapes and complex rhythms. Whether you're a seasoned performer or a beginner, the Pod64X's ergonomic design makes it easy to use and transport, so you can take your music anywhere.

But as with any piece of musical equipment, it's important to protect your investment from harm. That's where this custom Decksaver cover comes in.

Made from high-quality polycarbonate, this cover fits snugly over the Pod64X, protecting it from scratches, dust, and other harmful elements.

Decksaver's team of experts has spent countless hours researching and developing the perfect cover for the Pod64X, ensuring that it fits securely and allows easy access to your modules. With this Decksaver cover, you can rest easy knowing that your modular synthesizer is safe and protected, so you can focus on creating the music you love.

Dimensions

Weight: 0.345 kg
Length: 33.5 cm
Width: 16.7 cm
Height: 5.5 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires, and sunlight.

Notes: The 4MS Pod48X is a compact and powerful Eurorack case designed to meet the needs of today's modular synthesizer enthusiasts. With its rugged and portable design, the Pod48X is perfect for on-the-go performances, studio use, and jam sessions with friends.

Featuring 48hp of rack space, the Pod48X is large enough to accommodate a wide range of modules, yet compact enough to fit into most backpacks or carry-on luggage. Its sturdy aluminium construction provides excellent protection for your precious modular gear, while its built-in power supply delivers clean and reliable power to your modules.

It is important to keep your modular synthesizers safe and protected from the elements. That's why Decksaver have developed a custom-fitted cover for the Pod48X, made from ultra-durable polycarbonate material that shields your gear from dust, dirt, spills, and other hazards.

Decksaver's team of experts has meticulously measured and crafted each cover to fit the Pod48X perfectly, ensuring that your modules are always protected when not in use. Whether you're taking your gear on the road or just need some extra protection in the studio, this Decksaver cover for the 4MS Pod48X is the perfect solution.

Dimensions
Weight 0.285 kg
Length 25.4 cm
Width 15.4 cm
Height 5.5 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The Sonicware SmplTrek is a compact and powerful sampler that opens up endless creative possibilities for music producers and performers alike. With its intuitive interface and versatile feature set, the SmplTrek is the perfect tool for capturing and manipulating audio on the go.

The SmplTrek boasts a wide range of sampling and synthesis capabilities, including built-in effects, a step sequencer, and a wide variety of sound-shaping tools. It's a powerful and versatile instrument that's perfect for creating beats, melodies, and textures for your music.

To ensure the longevity and protection of your device, Decksaver has designed a custom-fit cover made from super-durable polycarbonate material. Decksaver's team of experts has spent many hours researching and testing to ensure that these covers provide the highest degree of protection against dust, debris, spills, and other potential hazards.

The Decksaver cover for the Sonicware SmplTrek is an essential accessory for any musician who values their equipment. Not only does it provide top-tier protection, but it also adds a sleek and professional look to your setup.

With this cover, you can rest assured that your SmplTrek will stay safe and secure, allowing you to focus on making music without any worries.

Dimensions

Weight: 0.70 kg
Length: 18.1 cm
Width: 15.3 cm
Height: 2.3 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Centre Negative to Centre Positive using one of the new EBS adapter cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adapter.
Want to change the polarity? Use the DC1-48 90/0 RP adapter.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Centre Negative to Centre Positive using one of the new EBS adapter cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adapter.
Want to change the polarity? Use the DC1-48 90/0 RP adapter.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adaptor cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Center Negative to Center Positive using one of the new EBS adaptor cables.

Here's how you do it:

To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adaptor.
Want to change the polarity? Use the DC1-48 90/0 RP adaptor.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Center Negative to Center Positive using one of the new EBS adaptor cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adaptor.
Want to change the polarity? Use the DC1-48 90/0 RP adaptor.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: A clever approach to VCOs here. Three unevenly phased sawtooth signals are blended to create phase cancellations and unorthodox harmonics. Simple but deep.

Supplier's Notes:
Explore the sonic space of phase cancellation! Phase cancellation shapes the characteristics of all acoustic instruments. It forms the basis of chorus and phaser effects. It gives vibrancy to detuned oscillators. The vibrant sound of pulse width modulation or the roaring sound of animated supersaws are a small part of a much larger sonic space that the Triphase Oscillator is built to discover.

The Triphase Oscillator produces three different sawtooth waves at the exact same pitch but with independent phase control. These are blended in a bipolar CP3-type mixer, giving a rich waveform at the output. By blending in a wave with a positive polarity, you reinforce in-phase harmonics; by blending a wave with a negative polarity, you reduce in-phase harmonics. The phase differences between the waves distribute the harmonics from in-phase to out-of-phase. The result is a comb-filter effect, like the effect produced by an acoustic reflection, with notches and peaks spaced evenly throughout the frequency range. Conventional pulse width modulation can be obtained by blending two sawtooth waves with equal but opposite polarity. Supersaw-like behavior can be obtained by using phase CV with the same polarity for all three waves. But many other interesting spaces can be reached. For example, by setting the phases correctly you can cancel out the first harmonic and get a saw an octave higher, or cancel both the first and the second harmonic, giving you a saw an octave and a fifth above the fundamental frequency. Modulation then brings back these canceled harmonics.

The Triphase Oscillator is completely analog, built around a sawtooth core that is functionally stable and accurate but sonically alive. It has linear FM on all three waves, and an excellent hard sync that can create shredding harmonic sweeps. The CP3 type mixer gives good distortion at higher levels, allowing you to blend three 5-volt-peak waves without worrying about headroom. All CV functions at audio rate. With an LFO driving the phases, it can easily replace the classic analog three oscillator setup, and in this configuration it's one of the fattest things you have ever heard. But the Triphase oscillator is much more than a thickener, and can just as easily produce thin reedy sounds or subtly shifting harmonic drones.

Specs

Size - 18HP
Depth - 25mm
Power Consumption
+12V 50mA
-12V 50mA

Tuning Range
1.2Hz-61kHz

Tuning Accuracy
~8 octaves

Output Range (Individual)
-5V-+5V peak

Output Range (Mix)
-8V-+8V peak

Notes: Yep, it's an attenuator. With a fancy name! And LEDs!

Sinc Defero's inputs are circularly normalled, too, so you can use it as a mult by leaving inputs unpatched.

Features:

Size and power:

4HP Eurorack
+12v: 45mA
-12v: 40mA
Sinc - from Old English sinc for "treasure" and Greek clastic for "easily removable"

Defero - from Latin for "sloping down"

"Portable treasure reduction"

What's in the box:

Module
Power cable
To reduce excess materials, screws will no longer be included with Noise Engineering's modules beginning in 2023.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Tracing the footsteps of its bigger brother, Iridium features all the synthesis elements of Quantum as well in a rack-compatible format. The combination of the powerful engine, incredible flexibility and detailed sound shaping facilities creates sheer endless possibilities of sound. Yet, the comprehensive layout and easy-to-understand structure lets you design your own sounds in no time. Sporting a solid metal casing and the same high level of craftsmanship like Quantum, Iridium is now ready to take over studios and stages throughout the world.

Contributing another entry in Waldorf's rich history, Iridium joins the family as a direct descendant of the PPG Wave. Though, Iridium offers much more than its ancestor. Five different synthesis models are provided by Iridium for each of the three oscillators:

Wavetable
Waveform (Virtual Analog)
Particle (Sampling and Granular Sampling)
Resonator
Kernels

Kernel mode has been introduced with the OS 2.0 of Quantum. This huge upgrade allows one oscillator to be turned into up to six sub oscillators. These can be interlinked through FM at audio rate and arranged in user-definable constellations. Just this upgrade alone would have provided enough additional features to create a synthesizer on its own. Now, all those functions have been integrated into Iridium as well.

Up to 7000 patches can be saved in Iridium. Patches from Quantum can be loaded in Iridium and vice-versa.

Iridium features three digital filters per voice. Two in the Dual Filter section and another one in the Digital Former. Several types are available to choose from:

12 or 24dB and Lowpass/Highpass/Bandpass with optional saturation or dirtiness.
Various filter models are available including those from Waldorf Nave, Largo and PPG 3V.
The Dual Filter section can be controlled independently or together in several different link modes.
The Digital Former offers all the filter types and models from the Dual Filter plus unusual models like Comb, Drive, Bitcrusher and more in addition.

All filters retain a true stereo signal throughout the entire structure of the instrument.

Up and down, back and forth
6 Envelopes, 6 LFOs and many more are just waiting for being used as sources in the 40 slots of the Modulation Matrix. Each slot has one additional control amount. Modulations can be directed to almost every numerical value in Iridium. All sources and destinations can be used as many times as desired until the Modulation Matrix is full. If you ever happen to run out of LFOs or Envelopes, you can use the Komplex Modulator for generating a custom shape LFO or Envelope.

Even though Iridium features a staggering amount of parameters to control, everything is organized in a logic structure which is easy to master. The major controls have their own dedicated knob, while the rest is accessible through the touch screen and the encoders around. There are no long menus keeping you from doing what you had planned. Instead, you will find a workflow which you will soon miss on other synthesizers.

Embedded in the front panel, a 4x4 silicon pad matrix invites you to launch notes, chords, arpeggios and sequences with up to 32 steps for notes and multiple parameter lines. Direct access to the parameters is granted by the seven encoders to the left and the right hand side of the touch screen.

Iridium's large color touch screen keeps you informed at all times. Upon moving a knob, Iridium gives you an optical feedback of your changes in real-time. Filter curves move, Particle grain sizes change, Envelopes warp and much more:

Komplex Modulator curves can be drawn with your finger
Envelopes show at which point the voices currently are
Wavetables are displayed in comprehensive view modes
VU meters show which voices are used and the individual voice levels
Different Analyzers show the audio signal at different points

Two Audio Outputs allow you to listen to Iridium, while two Inputs allow Iridium to process external signals. 4 CV inputs plus Gate In and Trigger In are ready to forward external signals to the Mod Matrix. Furthermore, Clock In and Clock Out will get your gear in sync. MIDI connections can be made through USB and DIN MIDI. Iridium is also equipped with a USB Host port for MIDI devices. This port also handles data exchange, in addition to the MicroSD card slot.

Once again, Waldorf have underlined their status with a new and exciting synthesizer.

Notes: Cutting Room Floor V3 Pedal

(Vintage Reel-to-Reel Tape, Echo, and Stutter)

The Cutting Room Floor has been updated and now has separate controls over the saturation of the input signal and tape delay signal. With this change, it's possible to have any amount of emulated tape saturation on the input signal and an adjustable tape delay level.

Housed in a smaller, compact footprint, the Cutting Room Floor V3 provides beautifully marred saturated tape tone and ethereal repeats. Imagine an abandoned factory with a fluttering tape machine left on infinite replay.

The Cutting Room Floor was designed to emulate the sound and functionality of vintage reel-to-reel tape overdrive and echo. This pedal reaches into the 21st century with characteristics that traverse the world of modulation and delay. Other features include a freeze button that traps a tone while still playing, and expression/CV control for time.

Designed and assembled in Seattle, Washington. Includes a limited 1-year warranty, if registered within 30 days of purchase.

- 150ma current draw

New in V3:

- Independent control of the tape saturation and tape delay levels

- High-quality knobs with textured grip

- Tape reel design lights up when the pedal is on

- Better layout of the knob placement

- Smaller 125B enclosure (4.77" x 2.6" x 1.39")

Notes: The Backpack is made from high-quality materials, including a soft, durable Alcantarar handle, ballistic nylon straps and water-resistant exterior, it is rugged and hard-wearing.

It can accommodate a RODECaster Pro II, plus microphones, studio arms and other accessories, as well as laptops up to 16 inches. Ergonomic adjustable shoulder straps with back and chest support ensure absolute comfort, with exterior pockets and compartments providing additional storage.

RODE BACKPACK Features:

Designed to exact specifications of the RODECaster Pro II
Lightweight and highly durable
Accommodates microphones and accessories
Laptop compartment (16")
Water resistant
Interior dimensions: 495 x 304mm
18L internal capacity

Notes: The most powerful MPC ever. Akai's flagship sampling drum machine gets a limited-edition upgrade with more RAM, more storage and more sounds.

*** Introducing MPC Stems- March 2024 ***

Akai Professional now introduces the next chapter of sampling innovation and production powered by the groundbreaking MPC Stems bringing sampling into a new chapter.

With MPC Stems, you can access the raw building blocks of any sample or vinyl record, isolating the DNA of any record. Producers can now manipulate the Drums, Bass, Music, and Vocals, opening new creative possibilities.

Akai Professional introduces the ultimate creative workflow with Stems Separation seamlessly integrated into the leading MPC series, powered by MPC 2 Desktop Software.

With MPC Stems, producers and beat-makers can now unlock unmatched sampling creativity by easily isolating drums, bass, music, and vocals from any audio, vinyl recording, or sample revolutionizing the art of sampling.
Experience lightning-fast workflow with superior sound quality, keeping you inspired throughout the creative process.

Slice and isolate samples while maintaining chop regions across each of the four stem layers.

Take complete control with direct manipulation of stem layers from the pads, adjusting volume, pitch, pan, start, and end points with instant responsiveness.

MPC Stems requires MPC 2 Desktop Software running 2.14 or higher, compatible with MPC Live, MPC Live 2, MPC One, MPC One +, MPC X, MPC XSE, MPC Key 37, MPC Key 61, MPC Studio Mk 2 in Controller Mode.

Supplier's Notes:
Celebrating 35 years of the most influential sampling drum machine

35 years ago, MPC made its debut and revolutionized pattern-based music production and ushered in a new era of groove-based production. MPC X Special Edition features the original iconic Akai colourway and font, bringing the nostalgic look and feel of the original MPC60 to your modern beats and productions. MPC X Special Edition is upgraded with more memory, more internal storage, and comes fully loaded with the MPC Instrument Collection making MPC X Special Edition the most powerful MPC ever.

The iconic look meets the most powerful MPC

More powerful performance

Introducing the MPC X Special Edition. Combing a rich heritage of ground-breaking creative functionality with the latest in modern technological advancements, MPC X SE is the most powerful and capable MPC ever. Powered by a quad-core processor, MPC X SE includes 4GB of RAM for rapid load times and expanded sampling capabilities for a supercharged workflow. Save the largest projects and ensure you have access to your sound libraries when you need them with 48GB of internal storage. WiFi and Bluetooth mean you're not restricted by cables and connections for high-speed data transfers.

The timeless look and feel

No other piece of gear defines the music producer like the MPC. The central nervous system of any production studio, MPC was and continues to be a recording studio mainstay to facilitate dynamic music creation in perfect step and sync. The commemorative MPC X SE draws on that legacy with the iconic colourway stamped with the retro logo and font. MPC X SE is here to bring the producer back to his proper place of prominence, ready for a new age of music influencers to lead the charge with musical excellence.

Total hardware integration for complete control of your studio

The modern music creation hub

MPC X SE is built to bring your creative space together. Transform your project studio into a modern music production

suite with MPC X SE tying everything together. Control MIDI enabled synthesizers and keyboards with 2 In, 4 Out MIDI I/O or drive modular and euro rack devices with (8) 3.5mm TS output jacks. (2) USB-A host ports enable lightning-fast connections to storage devices, bus-powered USB controllers, MIDI expanders, class-compliant audio interface devices, and more. Count on rapid data transfers that keep up with any high-paced music makers.

A source of superior sound

Capture audio directly from vinyl turntables for clean sample and loop creation right into your sample memory. With an upgraded 4GB of RAM, you're able to grab longer pieces of audio for truly expanded creative possibilities. (2) bination XLR-1/4" inputs deliver pristine audio from instruments, line level devices, and microphones. Phantom power ensures even your large capsule condenser microphones can plug and play right into any MPC session.

The winning workflow

Above all, MPC X SE truly puts you in the driver's seat of integrated workflow. Combine the tried-and-true MPC workflow with plenty of connections for all your wired devices, numerous audio outputs to route sound independently, and wireless Ableton Link 3 functionality over Wi-Fi, any creative task is literally at your fingertips from behind the helm of MPC X SE. Extended sessions are not a problem thanks to the adjustable 10" multi gesture display that ensures you'll always be comfortable when those inspired moments won't stop flowing.

Premier collection of plug-in instruments, sounds and insert effects to inspire you

The power of sound

MPC X SE features an exceptional collection of cutting-edge plugin instruments for truly inspired composition and performance. With over 25 instruments, users have a diverse palette of sounds and textures at their fingertips to create original melodies with no restraints. Dive into Fabric XL synthesizer or Stage EP keyboards for everything from spacious pad synths to meticulous grand pianos, warm electro keyboards layered with fat analogue brass layers, exquisite chamber string quartets, and beyond. MPC X SE is powered by a stunning library of instrument sounds to capture any mood, emotion, and vibe.

Award-winning insert effects plugins

Take your beats and productions to fully mixed and mastered commercial releases. MPC X SE offers a growing collection of dynamic sound processors, equalizers, multi-effects plugins and more for creative arranging of your music as well as all the tools to bring your songs and projects to the finish line. Collaborate with singers and unleash the AIR Vocal Suite to add rich harmony and vocal tuning in real time. Make your productions come alive with creative plugins AIR Flavor, Half Speed, Stutter and much more. For a real throwback MPC experience, pull up one of the many vintage MPC models like the 60, 3000, and more, all at the press of a button.

Technical Specifications

Pads
(16) velocity- and pressure-sensitive pads, RGB-backlit
(8) banks accessible via Pad Bank buttons

Knobs:
(16) 360- touch-sensitive Q-Link knobs for parameter adjustment
(1) 360- encoder for display navigation and selection via push
(7) 270- knobs for gain, mix & level adjustment

Buttons:
(63) dedicated-function buttons

Display:
10.1" / 257 mm (diagonal)
8.5" x 5.5" / 216 x 139 mm (width x height)
Full-colour LED-backlit display with touch interface

Memory
Processor: Quad-core ARMr processor
RAM: 4 GB
Storage 48 GB (over 16 GB available for user storage)

Power:
via power adapter (19 V, 3.42 A, centre-positive, included)

Connections:
(2) XLR+1/4" (6.35 mm) TRS inputs (Input 1/2)
(2) 1/4" (6.35 mm) TRS inputs (Input 3/4: 1 stereo pair)
(2) 1/4" (6.35 mm) TS instrument inputs (Inst 1/2)
(2) RCA inputs (Input 3/4: 1 stereo pair, phono- or line-level)
(2) 1/4" (6.35 mm) TS footswitch inputs (FS 1/2)
(2) 5-pin MIDI inputs (8) 1/4" (6.35 mm) TRS outputs (Main L/R, Outputs 3/4-7/8: 4 stereo pairs)
(4) 5-pin MIDI outputs
(8) 1/8" (3.5 mm) CV/Gate outputs
(1) 1/4" (6.35 mm) stereo headphone output
(1) 1/8" (3.5 mm) stereo headphone output
(2) USB Type-A ports (1) USB Type-B port
(1) SD card slot (1) power adapter input

Dimensions:
(width x depth x height) 19.9" x 16.7" x 3.4" / 50.5 x 42.4 x 8.7 cm (display flat) 19.9" x 15.3" x 8.4" / 50.5 x 38.8 x 21.4 cm (display upright)

Weight:
12.57 lbs. 5.66 kg

Notes: Expanding on Electro Harmonix's first homage to the tone that launched a thousand riffs, the EHX Satisfaction Plus delivers a wide palette of tones from classic '60s snarl to creamy lead tone to thick, earth-shaking sludge!

Where the original Satisfaction Fuzz circuit was a focused tribute, the Satisfaction Plus Fuzz treats the classic tone to a modern control set that includes a FAT/NORM mode switch, Bias control, and Tone knob. The added FAT mode features a tone that is bigger and warmer than the NORM mode for woolly leads and giant wall-of-thunder riffs. The Tone control is an active tilt-shift EQ that inversely controls both the treble and bass of the fuzz for broad tonal shifting. Set the Bias control to dial in the fuzz character from balanced and open to gated and snarly.

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (inches): 4.5 x 2.75 x 2.1
Current Draw: 5mA
Year Released: 2023

Notes: 8000 series Genelec stand plates are designed for use together with the Iso-Pod that comes with all 8000 series monitors. The Iso-Pod allows you to tilt the monitor for optimal alignment. Simply mount the stand plate onto the 3/8" thread on the tube and ensure tight screw connection. Place the Iso-Pod over the four pins of the stand plate. Available in black.

Width: 114 mm

Notes: The 2CVADD-HQ is a dual precision adder especially for adding 1V/octave (pitch-controlling) CVs. This makes it possible e.g. to transpose a sequence. Compared to general purpose CV mixers (like POLAMIX), this module does the summing of the CVs very precise (within a few millivolts), so the desired pitch is not affected.

The module offers three CV inputs for each of the both units; the first unit has an additional fourth input where the CV is subtracted - meaning "transposition downwards".

If you would like to have transposition buttons to shift by one or two octaves (or a free offset), take a look at the CVADDER-HQ module.

Notes: The classic ADSR envelope with CV control for all parameters

The ADSR module offers the classic four-stage envelope (Attack, Decay, Sustain, Release) that is not only loopable (patch the end output into gate input) but also accepts CV control over each of the stages! For the time values (A, D, R) the value set by the knob can be increased to five times the duration by the corresponding CV value. For the Sustain value the knob and CV value are simply added.

Notes: The CVADDER-HQ is a precision adder especially for adding 1V/octave (pitch-controlling) CVs. This makes it possible e.g. to transpose a sequence. Compared to general purpose CV mixers (like POLAMIX), this module does the summing of the CVs very precise (within a few millivolts), so the desired pitch is not affected.

The module offers four CV inputs where three of them are summed, and the CV at the fourth input is subtracted - meaning "transposition downwards".

This module also allows transposing the incoming CV by one or two octaves or a variable offset by buttons.

A separate output provides the voltage of the internal transposition (+1, +2 octaves / free).

If the transposition buttons are not necessary and you prefer to have a dual precision adder, take a look at the 2CVADD-HQ module.

Notes: The CVSHIFTER module is the AE version of the well-known analogue shift register modules that are around in the modular world since a long time. It works like this: The CV input is sampled with each trigger input signal and this CV is sent to the CV 1 output; at the same time, all CV outputs 1-4 are shifted by one.

Compared to the "classic" circuits, this module is digital based and therefore doesn't suffer from drift as some analogue ASRs and S&Hs do. The result is, that you can e.g. control the pitch of up to four oscillators which is a first step into polyphony.

The CVSHIFTER module offers three modes:

Classic: Each trigger shifts the CV outs by one position, the new CV goes to output CV 1
Cycle: Each trigger sends the CV to the next output channel, restarting at out 1; additionally a gate signal at the according output.
Random: The CVs are sent in random order to one of the four outputs, plus a gate at the according output.

Notes: LED Meter is a handy utility module designed to show audio levels. Three color versions are available:

- green colour with yellow-red peak segments.
- all blue colour
- all yellow colour

There are total 30 led segments, each one roughly corresponds to 1 dB of level, so it is 30 dB of measurement level available with this module.
The module has an input for the signal to be displayed, and its buffered copy is sent to the output for further processing, so no external splitter is needed.
Two trimmers are accessible via holes on the front panel: left trimmer adjusts brightness and right trimmer is used for the level adjustment. So the module can represent full scale signals ranging from 1 V to 12 V.
There is operation mode jumper on the back side. When the jumper is installed - bipolar operation is active, and when the jumper is removed - ordinary audio meter is active.

Dimensions
4 HP
40 mm deep

Current Draw
150 mA +12V
20 mA -12V

Notes: The Erica Synths Envelope Generator 2 is a re-triggerable, looping envelope generator with some unconventional features that are very useful for experimental setups. What sets the Black EG2 apart from other envelope generators is its optional GATE LENGTH setting, which allows for generating full ADSR envelopes even if a short trigger is used at the input. Likewise, in LOOP mode, the module outputs a full ADSR envelope instead of a classical AD envelope. The gate length is both manual and CV controlled, which allows for using this envelope generator in compact modular setups controlled by trigger sequencers only.

SPECS:

Gate input level 3...10V
Envelope amplitude 0...10V
Attack time 0...7,4"
Decay time 0...19"
Sustain level 0...10V
Release time 0...17"
Gate length 0...3,7"
Panel width 8HP
Module depth 25mm
Power consumption 29mA@+12V, 33mA@-12V

LOOP/SINGLE

Select between SINGLE SHOT or LOOP modes. When the internal gate is o , the rise and fall times are set via the A and R knobs. When the internal gate is on, all knobs have an e ect on the envelope shape.

The LED gives visual feedback on the envelope state.
GATE ON
Engage the internal gate and you have a full ADSR envelope in loop mode and with a trigger applied to the trigger input in single mode.

G. LENGTH

Set the internal gate length manually

LENGTH CV

This is the internal gate length CV input.

The CV is added to the gate length potentiometer setting

GATE

This is the GATE input

A / D / S / R

These knobs adjust envelope stage times and sustain level

TRIGGER

This is the TRIGGER input. You can retrigger the envelope and start the attack stage again, even if the gate is still high (see Figure 1).

If you wish to use the envelope generator with an internal gate, patch the incoming trigger signal here. The internal gate is linked to the trigger input, not the gate input.

EG OUT

This is the envelope generator output.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Inspired by the legendary Moog CP3 mixer, the 713 tweaks the old-school discrete circuits into three stereo inputs and one mono channel, summing to stereo with adjustable feedback and clipping to add character.

Supplier's Notes:
ADDAC713 is the stereo version of ADDAC System's 703 Discrete Mixer.

Inspired by Moog's CP3 mixer, this is a fully discrete analogue mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.

This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.

This new version was initially thought of as a percussion mixer, with mono inputs and panning, to allow placing percussive voices in the stereo field, while keeping channel 4 in mono for low end sources like a kick drum or Bass. In the development process ADDAC System slightly changed this initial idea, adding stereo inputs for the first 3 channels, but still kept the 4th channel in mono.

All four [GAIN] controls go to extreme levels, the first 3channels also feature [PAN] controls. Feedback is used to overdrive the whole mix. As the control is turned clockwise the sound will be clipped harder until it goes completely off, this happens as feedback is increased the audio bias reference also moves up, at extreme levels it offsets the whole signal upwards until it completely goes above the top rail clipping the whole signal hence the resulting gate effect.

The [MASTER OUTPUT] sets the overall output gain of the mixer, the two leds monitor the audio output signal. The Soft clipping switch engages an anti-click circuit which adds a low pass before the output, the switch allows 3 states: Soft low pass / Off / Hard low pass.

Features:

Three channels with stereo inputs, gain and pan knob
One channel with mono input and gainknob
Feedback/gate knob
Master output volume knob
Soft clipping switch
Two Led Monitors for Left and Right channels

Tech Specs:

8HP
4cm deep
80mA +12V
80mA -12V

Notes: Crystal-clear clock-synced delay for loop up to 90 seconds, echoes, sound-on-sound, Karplus-Strong etc.

Features:
Loop or echo time is synchronized to a clock
87 seconds of delay/loop time maximum
48kHz/24-bit sampling rate, loop recorded at 16-bit (24-bit optional)
Extremely quiet, low noise and low jitter design
Tap tempo button and clock Ping input set the basis for one "beat"
Delay/loop time set as a number of musical beats (or fractions of beats) using the Time knob, switch, and CV jack
Sample-accurate clock output for perfect synchronization
Loop clock outputs for each channel
Time switches change range of Time knob from 1/8th notes up to 32 bars
Digital feedback, up to 110%
Delay Feed control, independent of dry/wet signal mix
Infinite Hold mode disables recording input and fixes regeneration at exactly 100%
Reverse mode plays memory contents backwards
With an infinite loop locked, knobs or CV can "window" around memory, by shifting the loop
Trigger inputs for toggling Infinite Hold and Reverse
Send and Return for applying effects to feedback with external modules
CV jacks to control Time, Level, Feedback and Dry/Wet Mix
16HP Eurorack module

Specs:
48kHz, 24-bit low-noise hi-fidelity
Up to 90 seconds of loop time
16HP
+12V: 110mA
-12V: 45mA

Included with the Looping Delay:
16-to-16 pin power cable
4 x M3 Knurlie screws

Notes: Pan and cross fade up to three signals with AJH's versatile Triple Cross. Four different modes allow you to set up the three channels in numerous ways, for both audio and CV processing.

Supplier's Notes:
The Tone Science Triple Cross module is a design collaboration between electronic musician/composer Ian Boddy and AJH Synth.

It features three independant cross fader and panner channels, and it can be used with both audio and CV signals. Each of the channels can be configured in one of four different ways:

1) One In, One out Linear VCA

2) Two in, One out crossfader

3) One in, Two out panner,

4) Two in, Two out cross fader & reversing panner combined.

Audio rate modulation can also be used on the CV inputs to create Ring modulation and Cross modulation type sounds. Each channel has a dedicated Fade control, CV input, and CV Level attenuverter. These can be used together to bias incoming CV signals.

The L1 and L2 outputs from channels 1 and 2 are normalised to channel 3's inputs, which also have their own level controls to balance incoming signals. This allows very interesting, complex fading and panning between four different input sources, to either Mono or Stereo outputs..

The Triple Cross is very versatile, yet relatively simple to understand and use. However, as they say "knowledge is power", so do spend a little time reading about how to configure the channels in the four different modes, and how to combine all three channels together to create a super-powerful Four to Two to One cross fader.
Each of the three channels can be configured in four different ways, and all three can be used simultaneously. They do not all have to be in the same mode, so we could for example use channel 1 as a cross fader, channel 2 as a Panner for completely different signals, and channel 3 as a Linear VCA, again for different signals.

Specifications

Effective CV Range for CV-1, CV-2 and CV-3 is 0 to +5V with attenuverter fully clockwise or 0 to -5V with attenuverter fully anticlockwise.
Maximum permissible CV Range for CV-1, CV-2 and CV-3 is -12 to +12V
IN 1A to IN 3B Input levels -5V to +5V, levels up to +/-10V are possible however some clipping may occur.
Module Width: 14hp
Module Depth: 26mm (Including power lead)
Current Usage: 80mA Positive, 72mA Negative

Notes: The Tone Science Triple Cross module is a design collaboration between electronic musician/composer Ian Boddy and AJH Synth.

It features three independant cross fader and panner channels, and it can be used with both audio and CV signals. Each of the channels can be configured in one of four different ways:

1) One In, One out Linear VCA

2) Two in, One out crossfader

3) One in, Two out panner,

4) Two in, Two out cross fader & reversing panner combined.

Audio rate modulation can also be used on the CV inputs to create Ring modulation and Cross modulation type sounds. Each channel has a dedicated Fade control, CV input, and CV Level attenuverter. These can be used together to bias incoming CV signals.

The L1 and L2 outputs from channels 1 and 2 are normalised to channel 3's inputs, which also have their own level controls to balance incoming signals. This allows very interesting, complex fading and panning between four different input sources, to either Mono or Stereo outputs..

The Triple Cross is very versatile, yet relatively simple to understand and use. However, as they say "knowledge is power", so do spend a little time reading about how to configure the channels in the four different modes, and how to combine all three channels together to create a super-powerful Four to Two to One cross fader.
Each of the three channels can be configured in four different ways, and all three can be used simultaneously. They do not all have to be in the same mode, so we could for example use channel 1 as a cross fader, channel 2 as a Panner for completely different signals, and channel 3 as a Linear VCA, again for different signals.

Specifications

Effective CV Range for CV-1, CV-2 and CV-3 is 0 to +5V with attenuverter fully clockwise or 0 to -5V with attenuverter fully anticlockwise.
Maximum permissible CV Range for CV-1, CV-2 and CV-3 is -12 to +12V
IN 1A to IN 3B Input levels -5V to +5V, levels up to +/-10V are possible however some clipping may occur.
Module Width: 14hp
Module Depth: 26mm (Including power lead)
Current Usage: 80mA Positive, 72mA Negative

Notes: Designed to be a highly customizable connection matrix, 3DVCA packs a boat load of utility into a small 6HP package. Four VCAs share the three macro controls: X, Y, and Z. As a group, they shape incoming and outgoing signals and emulate the coordinates of a point in 3 dimensional space. This allow the VCAs to work together in a mono, stereo, or quad configuration and accomplish a variety of mixing, crossfading, and panning functions.

3DVCA is designed to be used in the following functions:

Quad monophonic crossfader
Dual stereo crossfader
Stereo balancer
Stereo VCA
Mono to stereo panner
Unity mixer with up to eight inputs
Quadraphonic panner

Each output has a dedicated SUM input which allows an external signal to be automatically mixed into the output signal. This allows 3DVCA to daisy chain both with other mixers and other 3DVCAs. For example, you can create a full mono, stereo, or quadraphonic mix by plugging the output of each 3DVCA into the sum inputs of the next 3DVCA in the chain. Using this method, a set of 3DVCAs can create a fully voltage controlled and decentralized mixer which ties together anything from a small skiff to a monster synth.

When 3DVCA works as a crossfader or panner, the X and Y parameters follow an equal-power curve that keep output signals at the same volume no matter how many inputs are mixed together. This is in contrast to the Z parameter which follows a linear curve to always behave predictably with external modulation sources. All inputs are fully DC coupled in order to work with modulation speed signals as well as static DC voltage sequences; this means that 3DVCA can handle any sort of signal that you throw at it. All op amps in the device employ rail-to-rail inputs and outputs to enable the largest headroom when mixing many different signals together.

Whether you need to maximize your mixing functionality in the smallest possible footprint or have the most control over every aspect of your system, 3DVCA provides a ton of functionality in any system. Enter a higher dimension of sound with the Mystic Circuits 3DVCA.

Dimensions
6 HP
30 mm deep

Current Draw
45 mA +12V
45 mA -12V

Notes: Two decades in the game and the mighty MicroKorg remains a classic. Crystal version celebrates the anniversary with a fresh new look and the same punchy sound.

Supplier's Notes:
A shining homage to two decades of microKORG legacy

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio.

The instruments that musicians recognise as "classics" are those that are loved and always in use, regardless of times and trends. The word "classic" symbolises musical instruments that are revolutionary in their field. There may be imitations of a classic, but the distinct character of the original shines more brilliantly and is only enhanced by time.

Two decades ago, the portable, battery powered microKORG was born with a radical new micro-keybed, a powerful Vocoder and ready-to-use sounds ideal for contemporary genres delivering countless hit performances, and instantly revolutionising the way musicians played. This compact sound monster introduced synthesis to a vast number of non-keyboard playing musicians and created a way of making music we now take for granted: a small keyboard resting unassumingly atop a larger one onstage, made for use by hobbyists and pros alike and finding itself front and centre of studios worldwide from the smallest bedroom to the largest pro recording facility.

To celebrate the 20th anniversary of its release, the special edition microKORG Crystal offers a unique and stunningly stylish take on this beloved synth - now a classic in its own right.

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio. microKORG Crystal is the ultimate reincarnation of this iconic synth.

"Skeleton" type semi-translucent chassis, with matching knobs and controls

Previously unchanged, the microKORG Crystal features a new take on the structure of the microKORG, with a semi-translucent chassis that lets you see the electronics and internals. Even the controllers are semi-transparent, including the knobs, dials and wheels. As a commemorative model, the microKORG Crystal is great fun to look at from any angle, and as its name suggests, it "crystalizes" the energy and feelings of the KORG team behind its birth.

A panel with a beautiful sheen

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Aluminium side panels for a sturdy feel

The original microKORG featured wooden side panels that suggested a retro feel, serving as an elegant accent to the analogue modelled synth engine. This new special microKORG features sleek aluminium side panels for a clean and depurated look.

Dedicated transparent carry bag

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Specifications

Sound generation:
Analogue Modelling Synthesis System

Synthesizer program:
Multi Timbral: 2 (max, Split/Dual Mode)

Voices: 4 voices

Sound source:
2 Oscillator + Noise Generator
Multi Mode Filter (-24dB/octLPF,-12dB/oct LPF/BPF/HPF)
EG×2
LFO×2
Virtual Patch×4

Voices: 4 voices

Vocoder program

Voices: 4 voices

Sound source:
1 Oscillator +Noise Generator
EG×1
LFO×2 8
Channels vocoder
Level and pan of each channel can be edited
Formant Shift function

Programs: 128
Effects: Modulation effects (3 types), Delay (3 types), Equalizer
Arpeggiator: 6 types

Controllers
Real-Time control knob X 4 (3 level Selection),
Arpeggio ON/OFF

Keyboard: 37 Keys (mini-keyboard, keyboard has velocity)
Inputs: AUDIO IN 1,2, Level switch LINE/MIC, [AUDIO IN 1, 2 (LINE) ], [AUDIO IN 2 (MIC)]
Outputs: L/MONO, R, Headphones
MIDI : IN, OUT, THRU
Display : 3 characters×1 line with 8 segment LED
Power supply: DC 9V (AC adapter)
Power: 6.4w Max
Dimensions: 524 x 232 x 70mm
Weight: 2.4 kg (instrument only, without batteries or microphone)
Included items: AC adapter, condenser microphone, dedicated transparent carry bag

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Dreadbox go back to their roots with this reissued analogue beast. Simple but effective single-oscillator monophonic design with a three-pole resonant filter and analogue distortion.

Supplier's Notes:
Dreadbox's highly anticipated Bass Synthesizer is finally back.

Its Deep and Dark sound is here to haunt you ...

All Analogue Bass Synthesizer
Faithful Reproduction of the 2016 Hades
1 Oscillators with 2 Sub Octaves and 2 Waveforms with PW control
3-pole Resonating Low Pass Filter
1 AD/RS envelope and a AR Amp Envelope

OTA VCA
OTA Distortion
Wide Range Triangle LFO
11 patch points for an astonishing spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Monophonic Epicness
Super Fat Oscillator
2x Sub Octaves for extra headroom
Special Internal Bass Boost Circuit
Warm Filter
Drive effect for aggressive sounds
CV outputs: Envelope, LFO, Mod Wheel, 1v/oct
CV inputs: PW, Cutoff, VCA, CV, Gate

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 0.9 kg

Requirements

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box

Hades Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter (specs as found at midi.org)
1x Ribbon cable

Notes: Combining the power of multi-oscillator wavetable synthesis with the percussive detail of sampled sounds, Pianophonic is a powerful hybrid synth engine featuring 8 voices of polyphony. Not limited to Piano sounds, the voice architecture of Pianophonic is extremely versatile and easy to use with the essential controls laid bare on the front panel, and the most significant CV inputs and outputs provided for full integration within eurorack patches.

Taking its inspiration from the wavetable/sampler keyboards of the 90s, Pianophonic revisits a lean and mean approach to digital sound creation but instead with 24bit 48Khz quality and fingertip control of the parameters that really matter.

With a built in SD card and an online re-synthesise utility, allowing users to create their own sound banks, the possibilities for sound exploration are limitless.

Notes: Optional accessory replacement panel.

Black anodised alu + heavy duty screen printing.