Search dance music

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: These are skinny (sometimes called noodle) patch cables for Eurorack. This is a pack of five cables, size 6", pink in colour.

Notes: This is a pack of five, 12" skinny patch cable for Eurorack. Colour is green.

Notes: This is a pack of five, 24" skinny patch cables for Eurorack. Colour is black.

Notes: These are 6" (15cm) right angle patch cables for Eurorack. Colour is pink, pack of 5 cables.

Notes: These are right angle patch cables for Eurorack. Size is 12 inch (30cm), colour is green.

Notes: The AURRAS Optical Vibraphase by SolidGoldFX is a powerful effects pedal named after the goddess of sound that meets the legacy of its predecessor the Athena Vibraphase in a harmonious blend of legendary, vintage Uni-Vibe textures and innovative, modern prowess.

Rich, Energetic Soundscapes

AURRAS Optical Vibraphase is a 2-stage asymmetric phase shifter built around a pair of selected and individually controlled opto-isolators offering a clearer signal with minimal distortion while simultaneously isolating the audio path from any possible LFO interference.

The dual LFO setup, powered by a microprocessor, provides limitless sonic flexibility. Drawing inspiration from albums such as Band of Gypsys or the Dark Side of the Moon, the AURRAS delivers the lush modulation and heavy pulse that have shaped Rock & Roll history.

With its dual LFOs, expression pedal input, adjustable dry mix control, and offset combined with Speed, Depth and Level knobs, AURRAS transcends eras with a rich tapestry of intriguing, lush liquid soundscapes. While the AURRAS features a 100% analogue audio path from input to output, it takes advantage of precise digital controls, offering soft-touch relay-based true bypass switching, on-board tap tempo and speed ramping.

Comprehensive Tone-Shaping Controls

With its dual LFOs, expression pedal input, adjustable dry mix control, and offset combined with Speed, Depth and Level knobs, AURRAS transcends eras with a rich tapestry of intriguing, lush liquid soundscapes.

While the AURRAS features a 100% analogue audio path from input to output, it takes advantage of precise digital controls, offering soft-touch relay-based true bypass switching, on-board tap tempo and speed ramping. Set your effect with the Speed knob, Expression Pedal, Tap Tempo, or by using the Ramp function. You can ramp up your LFO speed by simply holding the Tap Tempo footswitch, which will automatically ramp up to double your speed.
You can also ramp down your LFO speed by simply holding down the Bypass Footswitch. This will automatically decrease your speed to half. Repeat this process as many times as you'd like to achieve the desired speed.

Let's talk about LFO Offset

AURRAS runs on a pair of opto-isolators each operating on an independent LFO. While most Phaser or Modulation pedals use a single LFO to create their effect, independent LFOs can open a new array of effects by offsetting their symmetry.

The OFFSET ADJ knob and OFFSET MODE FREQ|PHASE knobs work in tandem. For a more conventional effect, turn the OFFSET ADJ mode fully counterclockwise, allowing both LFOs to be in sync with no offset.

The FREQUENCY OFFSET adds rhythmic patterns by slowing down the second LFO, while the PHASE OFFSET fine-tunes the throb by introducing asymmetry between the LFOs.

Notes: The Serge GTS is a complete redesign of the famous Serge Dual Universal Slope Generator (DUSG) by Serge himself - with a new core, optimized for speed and tracking. Like some of the clones it can be used for CV, but also provides exceptional audio performance: transient rise times as fast as 13us and a maximum cycle speed of 27kHz.

Some functions for which one Slope Generator can be used:

Function generator for linear, logarithmic, exponential, stepped etc. curves
Integrate an incoming signal
Sawtooth / Pulse oscillator
Add, subtract up to 4 signals
Max and Min function
VC Transient Envelope Generator
VC LFO
VC Portamento device, Envelope Follower (Detector), VC Pulse Delay (Monostable), Sub-Harmonic Series Generator (Divider), Audio Oscillator with variable waveform symmetry (saw to triangle), Non-Linear Audio Processor (low-fidelity VCF).
Serge GTS for eurorack:

Designed by Serge Tcherepnin 2021-2023
Increased audio range (up to >28kHz)
Tracks >5 octaves as a Sawtooth / Pulse oscillator
Temperature stabilized
Eurorack format (3U), 26 hp
Power consumption: 90mA @ +12V, 80mA @ -12V
(NEW) Skiff-friendly: < 25mm (1")

Notes: Stereo oscillator with wavemorphing, folding, and PM

"We may have just gotten the perfect Noise Engineering oscillator - in the most compact package possible." -- CDM Blog

Sinc Legio is a simple oscillator with some tricks up its proverbial sleeve. If you need some basic waveforms, Sinc has you covered - and it makes it easy to spice up those waveforms with phase modulation, wavefolding, or hard sync. Sinc pairs well with other oscillators in your system, too: hard-sync and stereo PM inputs make complex sounds easy to patch. Combine broad-ranging timbral parameters with a vintage-inspired chorus, and you're well on your way to stereo sound-design heaven in just 6 HP.

Sinc's multiple algorithms give a world of timbral possibility at the flip of a switch. Phase modulation, plucky FM, and bright and heavy modulation await. And on top of that, Noise Engineering have added a wavefolder to it. Shape and fold to your heart's content in Fold mode.

Not only is Sinc an incredible oscillator on its own, it's also part of the Legio platform. Use the included USB cable to connect to the Customer Portal and swap the firmware to any other Legio firmware, completely free, at any time. Let that sinc in!

6HP Eurorack
+12v: 140mA
-12v: 22mA
Sinc - from Latin: "treasure"

Legio - from Latin: "legion, army"

"A lot of treasure"

Notes: Stereo oscillator with wavemorphing, folding, and PM

"We may have just gotten the perfect Noise Engineering oscillator - in the most compact package possible." -- CDM Blog

Sinc Legio is a simple oscillator with some tricks up its proverbial sleeve. If you need some basic waveforms, Sinc has you covered - and it makes it easy to spice up those waveforms with phase modulation, wavefolding, or hard sync. Sinc pairs well with other oscillators in your system, too: hard-sync and stereo PM inputs make complex sounds easy to patch. Combine broad-ranging timbral parameters with a vintage-inspired chorus, and you're well on your way to stereo sound-design heaven in just 6 HP.

Sinc's multiple algorithms give a world of timbral possibility at the flip of a switch. Phase modulation, plucky FM, and bright and heavy modulation await. And on top of that, Noise Engineering have added a wavefolder to it. Shape and fold to your heart's content in Fold mode.

Not only is Sinc an incredible oscillator on its own, it's also part of the Legio platform. Use the included USB cable to connect to the Customer Portal and swap the firmware to any other Legio firmware, completely free, at any time. Let that sinc in!

Notes: TRS Split - CV/Audio signal distributor

TRS Split is a multipurpose CV and audio signal distribution module. It has three 3.5 mm TRS (tip/ring/sleeve - stereo) jacks and six ordinary 3.5 mm mono jacks.

It contains 3 identical sections set up as following:

Upper jack carries the tip signal
Middle jack carries the stereo/dual signal
Lower jack carries the ring signal

Each section can either split a stereo signal into two mono signals or join two mono signals into one stereo signal. The module does not have any active components and does not need a power supply.

Use cases:

When you plug a stereo signal carried by a stereo (TRS) cable into the middle jack, you receive two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. That way you can attack an "AUX" cable such as from your smartphone to your modular.

Or the other way around: Send two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. Receive a stereo signal at the middle jack to be used with a stereo (TRS) cable.

Converting from stereo to dual mono and back allows you to alter the two sides of a stereo signal with different effects/filters.

Some tuners such as the Korg NTS-2 accept inputs to tune two oscillators combined in one 3.5 mm stereo jack. With one splitter you can easily feed two VCO signals into such a tuner.

Switching sides

Two splitters can be used to switch tip and ring (left and right): Plug in a stereo cable in the middle jack of the first section. Connect mono cables to the upper and lower jack of the first section. Then connect the upper mono cable of the first section to the lower mono jack of the second section and the lower mono cable of the first section to the upper mono jack of the second section. The signals are switched. Plug a stereo cable in the middle of the second splitter and you're good to go.

Hint: This also works for MIDI signals. If you use MIDI over minijack, there are two standards A and B - some manufacturers use A some B - thus not all connections are working. Now you can easily switch between the standards using the TRS Split.

Note: The MIDI input of the DROID X7 automatically detects A and B, so there is no switching necessary. The MIDI output of the X7 can be set to A or B with a switch on the back of the module.

Stereo multiple setup

If you have a separate multiple in your modular, you can use the TRS-SPLIT to create a 1:2 stereo multiple as follows:

Plug a stereo cable in the middle jack of section 1, patch the mono cable from the upper jack into section 1 of your multiple (e.g. a 3/3/3 multiple) and feed two of the outputs back into the upper jacks of section 2 and 3. Do the same with the mono cable coming from the lower jack of section 1 going into the second section of a 3/3/3 multiple and patch two cables back into the lower jacks of section 2 and 3 of the TRS Split. Now the middle jacks of section 2 and 3 both carry the stereo signal.

Dimensions
2 HP
22 mm deep

Current Draw
Module does not draw current

Notes: TRS Tool - Stereo/Dual CV/Audio/MIDI signal multipurpose module

TRS Tool is a multipurpose CV and audio signal distribution module for working with 3.5 mm stereo jacks (tip/ring/sleeve). These jacks are common for stereo audio but also for MIDI.

The TRS TOOL has no active components and does not need a power supply. It contains 3 different sections set up as following from top to bottom:

TRS Split
The upper jack carries the tip signal
The middle jack carries the stereo/dual signal
The Lower jack carries the ring signal

Use cases:

When you plug a stereo signal carried by a stereo (TRS) cable into the middle jack, you receive two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. That way you can attack an "AUX" cable such as from your smartphone to your modular.

Or the other way around: Send two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. Receive a stereo signal at the middle jack to be used with a stereo (TRS) cable.

Converting from stereo to dual mono and back allows you to alter the two sides of a stereo signal with different effects/filters.

Some tuners such as the Korg NTS-2 accept inputs to tune two oscillators combined in one 3.5 mm stereo jack. With one splitter you can easily feed two VCO signals into such a tuner.

TRS Quad Multiple

Multiply a stereo signal. Four TRS jacks to be used with stereo minijack cables.

Use cases:

You could use this to multiply the signal for headphones - listen to patches together.

Or create sends - route one (or two) stereo signals to effects and use the third one as dry signal going to the mixer.

Experimental: multiply a MIDI signal to two or three receivers: NOTE: depending on the output power of the MIDI sender and the power draw of the MIDI receivers this might or might not work. MIDI uses a current of typically 5 mA instead of voltage levels for data transmission. So when you attach too many devices to one output the current might not be enough to drive all of them. So this is strictly spoken not covered by the MIDI standard, but might work anyway.

A/B Swapper
The bottom section of the module consists of two connected TRS jacks.
Whatever signal applies to the tip in jack A will be routed to the ring in jack B.
Whatever signal applies to the ring in jack A will be routed to the tip in jack B.

Use cases:

Switch the left and right side of a stereo audio signal.

Switch between MIDI standard A and B: If you use MIDI over minijack, there's two standards A and B - some manufacturers use A some B - thus not all connections are working. Now you can easily switch between the standards using the TRS Split.

Note: The MIDI input of the DROID X7 automatically detects A and B, so there is no switching necessary. The MIDI output of the X7 can be set to A or B with a switch on the back of the module.

Dimensions
2 HP
22 mm deep

Current Draw
Module does not draw current

Notes: Dtronics DT-1000, A hardware controller for the Roland Boutique D-05 and D-50/D-550

The Dtronics DT-1000 is a hardware controller for the Roland Boutique D-05 and D-50/D-550.

The DT-1000 can also be operated on a vintage Roland D-50 / D-550

Almost every parameter of the Roland D-05 gets its own slider, 10 keys and 56 pots in a nice and solid desktop case.

Some pots are doubly assigned, but can be switched quickly and are very easy to read.

For Roland Boutique D-05 Linear Synthesizer
Also compatible with Roland D-50 and D-550 vintage synthesizers
Direct access to all important parameters of the Roland Boutique D-05
10 Buttons and 56 pots
Robust housing
MIDI input and output
USB

Included in the box:
Dtronics DT-1000
DIN(5) MIDI cable
USB cable


Specifications
Material: high-quality plastic
Height: 44 mm
Width: 300 mm
Depth: 200 mm
Weight: 0.985 gram
DIN cord (DIN5P) is included
Power consumption USB or DIN: 60mA

Notes: ***B-STOCK: Box opened, product in perfect working order***


Listen Professional circum-aural closed back headphones are the essential work tool for music production. Their tonal balance and precision in terms of audio spectrum make them perfect to evaluate the sound work quality. In addition, their comfort and accessories will make them very attractive for people travelling on business trips. The sound quality and the dynamics of these headphones are very surprising considering that this quality is usually found on more expensive items. The attention to detail of these headphones can be also shown thanks to the various patents and technologies which belong to Focal. Hence, a brand-new driver membrane was developed. The main goal was to propose a solution which would keep all the dynamics from the original track while reproducing accurately every single detail on the whole audio spectrum. Even if Listen Professional headphones are closed, they produce a very lively sound, giving the feeling of semi-open headphones while still providing the isolation of closed headphones.

Focal's core expertise:

The speaker driver has been given a 100% Mylar suspension, whereas the central dome is composed of a Mylar-titanium alloy to provide more rigidity and extended frequency response in the upper end of the spectrum. Thus, the moving part is extremely light, enabling the transducer to exceed 40kHz on a flat baffle. The reproduction of the bass and sub-bass registers also received a great deal of attention. The team of engineers managed to combine two factors which are hardly compatible: a tuning frequency which is as low as possible and extremely low distortion (0.3% at 1kHz - 100dB).

Ear cushions - the ideal acoustics:

The size of the ear cushions (height, width and depth) gives them a volume which makes it possible to achieve a great tonal balance. Microfiber provides a more linear bass response providing a better acoustic output, whereas the acoustic tissue, which is closer to the speaker driver, offers great absorption and linearity in the 3-9kHz register. The bass and lower mid-range sections benefit from remarkable tonal balance and excellent articulation: where compression and frequency response generally suffer on closed-back headphones.

For a frequent and intensive use:

Listen Professional is also equipped with a headband boasting a unique design to ensure comfort and durability. Its curve remains consistent, regardless of the shape or size of the user's head. Combined with the layer of silicone underneath the headband, this ensures that the weight is spread out evenly over the head, preventing the user from feeling any pressure in certain areas, which can be very uncomfortable during long working sessions. The horizontal and vertical rotation of the ear cups operate thanks to one single part: a joint integrated into each one. The ear cups also feature a black structured covering, making them resistant to impacts and scratching.

Provided Accessories:

Rigid carrying case. Thermoformed shell in the shape of the headphones. Can store one cable and an iLok key (not provided), all within its compact dimensions. Two OFC copper 24AWG cables with a very low resistance.

- 5m spiral for domestic use
- 1.2m cable fitted with a 3.5mm stereo jack connector
- 3.5mm and 6.35mm jack adapter

Notes: Once upon a time, in a fairy tale world, there stood a hidden forest. On the eve of every full moon, magical and delicate sounds of light were heard bouncing and reverberating through the trees. These sounds carry artifacts of notes moving backward and stretching through time. They are referred to as, Lore. Walrus Audio is excited to announce their next experiment into ethereal ambiance called the Lore Reverse Soundscape Generator. Made up of five different programs, each utilizes different combinations of delay and reverb that feed into each other for time-warping ambient creations. to create the soundtrack to your storybook adventure. Featuring two DSP chips running in series, each with their own analogue feedback path, the Lore takes you on an adventurous journey rich with themes of reversing, time-stretching, pitch-shifting, and vast ambiance.

Explore vast time stretching and reverse sounds with five different custom programs:

I. Reverse Delay into Reverse Reverb
II. Reverse Delay into Octave Up Reverb
III. Reverse Delay into Octave Down Reverb
IV. Reverse Reverb into Forward Reverb.
V. Pitch Delay into Pitch Delay.

Further explore the Lore with momentary features for adjusting modulation speed and a time warping effect that can shift the clock rate up or down, giving a rising or sinking effect. The Lore comes coated in a muted green enclosure with cream, orange, brown and dark green ink with art by David Huttner. The die-cast enclosure's exact size 9,2 cm x 12,2 cm x 5,72 cm including knobs. Power requirements are 9VDC, centre negative (300mA minimum).

Dimensions and power consumption: 9,3 x 11,8 x 5,6 cm (W x D x H)
300 mA

In the box:

Walrus Audio Lore
Manual
Sticker
Guitar pick
Pouch

Notes: With Melee, Walrus Audio have given you the two most quintessential effects that yield unruly amounts of power and influence to an instrumentalist: reverb and distortion. They have been harnessed and woven together for an eternity of ethereal power with The Melee: Wall of Noise. The Melee unapologetically uses a joystick to meld reverb and distortion into one massive blaze of sound. With the flip of the order switch, run the distortion into the reverb or reverb into distortion; signal chain is your call now. For the explorer, the Melee can run one of three different reverb programs Ambient, Octave, and Reverse.

In a less-is-more approach, Walrus have intentionally decided on controls that are fun to use and will inspire a wealth of creative output. Use the joystick to control the amount of distortion by moving it up and down. Moving the joystick left and right will adjust your reverb mix. The tone and decay toggles have low, medium, and high settings. Modulation can be added to the wet signal by holding down the bypass switch and moving the decay toggle. The left position is no modulation, the middle is a slight modulation, and the right is a high modulation.

Algorithms

The Melee is equipped with three different reverb programs, which can be changed by simultaneously pressing the bypass and sustain stomp switches. Experiment with the order toggle switch to hear how differently these all react in front and after the distortion!

Ambient Reverb (Pink LED) - Huge reverb capable of massive trails and engulfing your chords into an angry wash of sound. Great for soaring melodic lines or shoegaze-driven chord progressions.
Octave Down Reverb (Yellow LED) - Similar to the Dark mode in the Slo, you'll find an eerie lower octave hovering in the reverb trail for a nice and dark atmospheric touch.
Reverse Reverb with Feedback (Blue LED) - Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload. Big, slow, and sad chords love to hang out there.

Momentary

Press and hold the sustain switch to ramp up the reverb trails. Release and the trails will ramp back down to where the decay switch is currently set. The sustain switch can also latch in all three programs. Press and release the Sustain switch to capture and sustain the current reverb decay for long pad-like sounds in your wet mix. Press again to release the latch, and the reverb trail will taper off based on the position of the decay knob.

Specs
The Melee comes coated in a glossy neon pink enclosure with white, yellow, and green inks with art by David Huttner.
The die-cast enclosure's exact size is 3.62" x 4.79" x 3.14" (including joystick height).
Three bypass modes: DSP, DSP+True, True Bypass
Power requirements are 9VDC, centre negative (200mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Power supply not included.

High-Gain Distortion and Reverb combo
Controls: Vol, Tone, Decay, D>R|R>D (determines order of effects), Joystick (distortion level + reverb mix), bypass, sustain switch
Joystick control to meld reverb and distortion and inspire a wealth of creative output
Joystick controls reverb mix (x-axis) and distortion level (y-axis)
Switch signal-chain-order of distortion- and reverb-effect
D>R (distortion into reverb) or R>D (reverb into distortion)
D>R mode: traditional set up. Notes and chords remain their clarity
R>D mode: notes and chords are muddied to create a wall of sound
3 different reverb programs: Ambient, Octave and Reverse
Ambient Reverb: Huge reverb with massive trails
Octave Reverb: Lower octave on reverb trail. Like "Dark" mode on Walrus Audio Slo.
Reverse Reverb with Feedback: Add reversed reverb trails or push into reverse feedback overload.
Tone 3-way-toggle-switch sets the tone of reverb and distortion: normal, dark, bright
Decay 3-way-toggle-switch sets time of the reverb: minimum, medium, maximum
Set modulation via secondary control (decay 3-way-switch): none, slight (33RPM), high (45RPM)
Use momentary bypass to create a moment of texture
Sustain switch ramps up reverb trail to maximum or latches current reverb decay
3 bypass modes: DSP bypass, DSP+ true bypass, true bypass
9-volt DC, Centre Negative, 200mA minimum
Power Supply not included
Designed and assembled in the USA

Notes: Switchy is a module that allows you to turn on or off up to three modules (or busboard) independently of each other.

No need to turn off the whole case: All three voltages (+12V, -12V, 5V) are interrupted at the same time.

Used to reduce the background noise of certain "noisy" digital modules when not in use, to initialize certain modules or change their function, to change an SD card, to relieve the power supply with energy-consuming modules, etc.

Dimensions
6 HP
30 mm deep

Current Draw
20 mA +12V
20 mA -12V
20 mA 5V

Notes: Transpos lets you transpose three CV channel with a single source.

Adder:

The voltage of each CV input can be varied by plus or minus two octaves depending on the switch and the potentiometer of each channel. Transpos uses precision regulators: for example if we increase by a fifth with the switch on "+" we reduce it by a fifth when we pass on "-".

Transposer:

The 1V/o CV input will influence each of the three channels. By turning the CV potentiometer you can globally increase or decrease the transposition of the three channels at the same time.

Dimensions
8 HP
40 mm deep

Current Draw
70 mA +12V
70 mA -12V
0 mA 5V

Notes: Mûmack is built from a temperature-stabilized analog source producing the three classic waveforms: triangle, saw, rectangle. This basic signal can be altered or enriched in several ways, which can be combined with each other, and associated with one VCA per mode.

Peak Compressor:
In the central position the signal is not modified. Turning the potentiometer to the right or to the left will compress the signal positively or negatively. It is this signal that will then feed Usual, Mûm and Hack. An LFO is dedicated to the compressor, controllable in speed and amplitude. A CV input with attenuator can also control the compressor.

USUAL:
The three waveforms are freely mixable, a CV input and a potentiometer can change the shape of the rectangle wave (PWM). The compressor intervening upstream, it can strongly influence the final form and the amplitude of USUAL. This produces complex analog waveforms, moving in time with the LFO or the CV input. The linear potentiometer makes it possible to mix the signal with the others, and to dose the volume of the direct output. The rotary potentiometer acts as an attenuator for the VCA input.

MÛM:
The Waveform potentiometer move the waveform of Mûm continuously from a attenuated triangle to a more pronounced triangle, then to a sinusoid and finally to a square wave. An LFO allows you to add a vibrato adjustable in speed and amplitude. The linear potentiometer makes it possible to mix the signal with the others, and to dose the volume of the direct output. The rotary potentiometer acts as an attenuator for the VCA input.

HACK:
Mûm's signal is taken up in a Wavefolder + compressor. Depending on the settings of the Peak compressor, and the three LFOs, we obtain complex, moving, organic waveforms. Again the linear potentiometer allows to mix the signal with the others, and to adjust the volume of the direct output. The rotary potentiometer acts as an attenuator for the VCA input.

ALL:
The three channel (Usual, Mûm, Hack) are mixed and brought together in a single output. The output volume is adjustable and a CV input with attenuator works like a VCA.

MIXER & VCA
The voltages produced by Mûmack, as is the case with many analog VCOs, can be high. The mixer allows them to be attenuated if necessary. Each of the three channels, and the product of the three, can be controlled by the VCA, with attenuator. The VCA is designed to add distortion at high values. The mixer is exponential for more subtle adjustments in low values.

Dimensions
30 HP
40 mm deep

Current Draw
155 mA +12V
155 mA -12V
0 mA 5V

Notes: Straight 1.2m thermo plastic cable with a one button remote and inline microphone. Compatible with most smartphones.

Notes: Soft over-ear memory foam cushions covered with PU leather. The thickness and materials provide better comfort and excellent isolation. Adding a low end boost for a warmer sound with powerful dynamics.

Notes: Ultra soft over-ear memory foam cushions covered with Alcantarar, an aesthetic, functional, and CO2 neutral material. Highly comfortable and ideal for longer listening sessions. Provides a spacious, open sound with low isolation.

Notes: High comfort headband with memory foam and head padding covered with PU leather for longer sessions.

Notes: Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose to reduce distortion and increase transparency. Tuned for a balanced, accurate sound. Balanced sound - Bio-diaphragm.

Notes: Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose for more defined high-frequency details, more pronounced mid-range, better dynamics, and more natural tonality.

Notes: Celebrating the classic, shimmering flanger sounds of Andy Summers, the EHX Walking on the Moon is a tribute to the tones Andy employed while carving his niche in the early days of playing with the Police. Liquid flange effects that hint toward chorus with extra depth and nuance make Andy's sound one of the most coveted in all of the guitar universe.

"This beautiful shimmering which sort of made the sound more bigger and more glamourous - became a sort of characteristic of my guitar sound - A big part of my guitar sound at that time in The Police was the flange sound which we have here today in this great new pedal." - Andy Summers

The Andy Summers Walking on the Moon is an analogue flanger with a simple but powerful control set of RATE, RANGE, and COLOR. RATE sets the speed of modulation which ranges from slow, smooth filter sweeps to jittering vibrato. RANGE controls how narrow or wide the effect sweeps into the bass frequency range. The COLOR control effects the intensity of the flanger effect from subtle chorusing effects to classic jet woosh sounds. These three controls interact to create a wide breath of modulation effects.

Additionally, the Walking on the Moon includes a FILTER MATRIX which disengages the LFO from the flanger circuit, freezing the flanger giving a fixed filter effect, which can add chime or metallic overtones to your sound without the movement of a traditional modulation pedal. A DRY output allows you to split your dry signal from the effected signal.

Special Artist Edition graphics featuring Andy's signature adorn the chassis and a tribute Walking on the Moon poster with art by Laura Josephson is included with each pedal.

Analogue Flanger / Filter Matrix sounds of Andy Summers
RATE sets modulation speed
RANGE adjusts lower limit of flanger sweep
COLOR controls intensity of flanger effect
Dedicated DRY output
Special Artist Edition Graphics
Includes Walking on the Moon poster design by Laura Josephson
True Bypass
9V Power Supply included (optional 9V battery not included)

Specifications
Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.75 x 4 x 2.25
Current Draw: 40mA
Year Released: 2023

Notes: These covers are made from 3mm glass affect acrylic.

They fit perfectly, protecting your equipment whilst also looking absolutely stunning.

All the original details of your equipment are laser etched onto the underside of the acrylic, which means you can see it but not feel it on the smooth top surface.

Notes: This stand its part of a new concept in COVERUP. With differents parts, you can use to put on multiple synths, including big devices, until now, not possible with the other stands.

You can configure your setup with you like more, with two big devices, or three medium devices. Easy to ensamble, very light to move from your studio to live. Just you need 1 minute to arm and start to playing.

Your setup of synthesizers and studio equipment can change permanently and with it also the position on the work table.

Taking this into account, CoverUp developed a 3-level support, which can be set up in different ways depending on the number of machines that we are going to place and their size.

In the triple stand configuration (using all 4 parts), 3 20cm machines can be placed. deep and a maximum height of 7cm.

This space is enough for much of the hardware available today.

The triple bracket parts are assembled with screws (included) using a universal socket that holds them together firmly.

In turn each part can be used as a simple support. It is only enough to separate the parts by removing the screws and use each part as it suits us.

Each part has rubber feet underneath, so that the support does not slip and is firmly supported.

Both halves of the triple support are linked with wooden rods at various points to give it lateral stability.

The design contemplates space for the rear connectors of each equipment, so that none of them are obstructed by the support.

Measures:
Depth: 58cm
Height: 41cm
Width: 34cm

Notes: The model 230 double support is designed to house two large pieces of equipment, with the ability to improve the operating position of both.

In each position of the bracket, a 30cm piece of equipment can be placed. deep, such as Maschine MK3 and Maschine Jam.

This double support in turn allows it to be used as two simple supports. Simply unscrew the front half from the back.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The width is adjustable according to the length of the rods that join both halves.

The support includes rubber feet so that it does not scratch or slip and the screws for its assembly.

Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.

Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.

The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.

Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.

Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.

In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.

Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.

The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.

Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.

Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.

In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.

Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.

Notes: Designed specifically for the Akai MPC Live, this stand offers a comfortable and ergonomic position for your equipment.

Crafted with two feet connected by 6mm rods to provide enhanced stability, ensuring your MPC Live stays securely in place.

Assembling the stand takes only seconds, and it weighs just a few grams, making it perfect for musicians who use their MPC Live for live performances.

To protect your MPC Live and prevent slippage, the stand includes silicone feet that prevent scratching and sliding.

Introducing the MPC Live Stand - the ultimate accessory for your Akai MPC Live. Elevate your performance and experience with this specially designed stand that combines comfort, stability, and convenience.

With its ingenious construction featuring two feet connected by sturdy 6mm rods, this stand guarantees rock-solid stability for your MPC Live. Say goodbye to wobbling or shifting during intense performances, allowing you to focus on creating music with confidence.

Setting up the stand is a breeze. In just a matter of seconds, you can assemble it effortlessly, thanks to its smart design. Plus, its lightweight construction ensures that you won't be burdened by unnecessary weight when on the go, making it an essential companion for live gigs and studio sessions.

It is important that you protect your precious MPC Live. That's why the stand includes high-quality silicone feet, meticulously designed to prevent any scratches or slips. Your MPC Live will stay in pristine condition, ready to perform at its best whenever you need it.

Choose the MPC Live Stand and take your music production to new heights. Elevate your setup, enhance your comfort, and unleash your creativity with this must-have accessory.

Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm

Notes: These supports allow the equipment to be used in an inclined position in such a way that its operation is more comfortable.

The two feet that support the equipment are connected by two 6mm wooden rods. that give it greater stability and prevents the feet from separating.

The temples and the silicone legs are included.

Notes: One of Native's latest creations has its ergonomic stand ready for studying.

Now you can have greater comfort, view your screen and all the equipment thanks to this custom-designed stand.

At the base, there are 3m rubber feet so that the equipment does not move at any time.

Weight: 0.1 kg
Dimensions: 5 × 5 × 1 cm

Notes: The latest addition to the Roland TR family has its exclusive stand.

Specially designed for the Roland TR-8s.

Taking advantage of the shape of its cabinet to securely hold the equipment.

Achieving a very comfortable position during use.

These stands are lightweight, detachable, and take up very little space, perfect for live performers.

In the studio, they save space and improve the working position.

All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.

With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland TR-8s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland TR-8s.

Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm

Models: TR8S, MC707

Notes: The ideal support for your three Boutique synthesizers.

To use them in a comfortable and ergonomic position, which in turn saves space.

Specially designed taking into account the need for space for wiring and rear connectors.

On the support faces, each support has a recess to place silicone feet and prevent the equipment from slipping or scratching.

Includes the two side supports, the rods and the silicone feet

Notes: Triple support for the entire Korg Volca line (Beats, Kick, Sample, FM, Keys, Bass, Drum, Modular, Mixer)

Save space in your studio and operate your synthesizers more comfortably.

The brackets fit directly into the Volca without the need for screws or moving parts. This makes them easy to transport and set up for those who go out and play with their Volca.

On the bottom, each foot has silicone legs to prevent them from scratching or slipping.

The pictures show red, but the colour is black.

For up to 3 Korg Volca devices
Made of biocompatible PLA plastic
Connection of the side parts by means of wooden rods
Dimensions (W x D x H): 196 x 246 x 271 mm

Suitable for:

Volca Beats
Volca Drum
Volca Bass
Volca Keys
Volca FM
Volca Kick
Volca Nubass
Volca Modular
Volca Sample
Volca Mix

Notes: If you have Behringer TD3 machines in your studio, this is the ideal stand.

Designed and designed exclusively for the Behringer TD3, it may be more comfortable, more spacious and maintains your equipment 100% safe and stable.

All our supports, keep adherent feet 3m behind them so that the support does not loosen.

Notes: The studio legends

For decades now, professional users all around the world have placed their trust in Beyerdynamic's classic range: DT 770/880/990 PRO. These benchmark-setting studio headphones, available in three different models, boast extremely detailed resolution and very transparent sound.

The DT 770 PRO headphones is the range's closed-back model and offers maximum flexibility and detailed sound that you can rely on.

Impressive sound volume

The Beyerdynamic DT 770 PRO headphones have established themselves as a firm favourite amongst music producers, sound engineers and broadcasters and are used in studios all over the world. They reproduce the entire frequency range with incredible precision, and even reproduce low frequencies in punchy detail.

Top-notch impulse response

The headphones are designed for critical music and sound monitoring, providing a perfectly neutral listening environment with exceptional isolation and top-notch impulse response. High frequencies are translated into an analytical and differentiated sound. Ultra-low bass sounds are defined and reproduced crisply.

Extreme comfort

The robust spring steel headband ensures a secure fit for the wearer. Soft ear cups mean that the headphones are comfortable even if worn for prolonged periods. The single-sided cable allows the headphones to be put on and taken off frequently without cables getting tangled.

Allrounder; universal studio

These 80-ohm headphones are the ideal Choice for a range of studio applications.

Made in Germany

The DT 770 PRO headphones are and always have been handcrafted in Germany. The durability of these headphones is worth noting, because all the components used are replaceable if necessary.

High-end studio quality

Thanks to the Tesla technology developed in Heilbronn, the DT 770 PRO offers even finer resolution with precise and powerful bass. The pro flagship also sets new standards in terms of wearing comfort and workmanship.

Technical specifcations

Transmission type: wired
Weight headphones without cable: 270 g
Transducer type: Dynamic
Operating principle: Closed
Nominal frequency response: 5 - 35,000 Hz
Nominal impedance: 80 O
Nominal SPL: 96 dB
Nominal T.H.D: < 0.2%
Power handling capacity: 100 mW
Sound coupling to ear: Circumaural
Ambient noise isolation: approx. 18 dBA
Nominal headband pressure: approx. 3.5 N
Weight: 345 g
Length and type of cable: 3 m / straight cable
Connection: Gold plated mini stereo jack plug (3.5 mm) & 1/4" adapter (6.35 mm)

Notes: The iconic Synclavier brand returns with this digital powerhouse, based around FM synthesis but also offering additive and subtractive methods. Super versatile, with up to 98-voice polyphony and MPE support.

Supplier's Notes:
The new buck in the Synclavier stable

Synclavier Regen is the newest in an auspicious line of Digital FM synthesizers. Designed for desktop use, it contains the power of the Synclavier II DSP engine, enhanced and optimised. Full colour screen, liquid-like touch controls, high fidelity audio output coupled with a sound design powerhouse makes this the synth you always dreamed of.

Regen supports additive synthesis for full control of 24 harmonics. Synclavier have now added subtractive synthesis to the Synclavier synthesis engine, especially for Regen, allowing creation of super saws, PCM square waves, and noise generation. Or you can use samples for your carrier waveform.

And these different waveform generators can be mixed. You have up to 12 partials to use in your sound design creation with crossfades assignable to inputs such as velocity, pressure, mod wheel, and of course, keyboard.

Regen is loaded with content to get you inspired fast. There are over 550 timbre presets across 10 newly commissioned timbre libraries. On top of that, there are over 2000 royalty-free samples built-in, including over 350 selected original samples from the NED era and 2 exclusive artist sample libraries.

When you're done exploring the factory content, you'll have fun with the sound design possibilities. You can layer up to 12 partials with different sound generators (additive, subtractive, samples) then apply dynamic effects per partial. It's truly an expressive instrument, both to program and to play. Polyphonic aftertouch and MPE is fully supported and there's a sophisticated modulators section where you can apply responsive curves to properties driven by pressure, velocity, mod wheel position, and so on.

Synclavier Regen is a desktop unit measuring 310mm wide by 260mm tall and 42mm deep.

Housed in aluminium, finished with a sand-textured black and Synclavier red surround. It has rubberized plinths.

User interface consists of many silicone buttons with multi-colour backlighting, a virtual knob capacitive-touch slider with epoxy-coating. A VK display is included as well as a main modal display that shows current parameters, user settings, timbre library, etc.

Over 40 years of synth design has led to this product. It's a sound-designer's dream in a timeless desktop package.

Sound-design Capabilities

Advanced DSP synth engine, as used on Synclavier II, has been extended for Regen.
12 separate tracks of multi-timbrality, assignable to MIDI tracks and keyboard ranges.
Up to 98 simultaneous voices. Voice count is dependent on system load and is likely to be much higher in typical scenarios.
12 partials per timbre. Each partial can be 1 of 3 oscillator synth modes: additive, subtractive, or samples.
Additive mode supports coefficient and phase control of 24 harmonics.
In samples mode, up to 128 samples can be placed on the partial's patchlist.
Subtractive can have a noise generator or up to 9 de-tunable continuous sawtooth waveforms.
Hybrid (resynthesized samples)
Timbre-level effects, including:
Stereo reverb algorithm with pre-delay and library of presets.
Highly-optimised multi-mode filter with sophisticated filter envelope.
Bit-crusher (for use with additive, sample, and hybrid modes).
Frequency modulation (FM) controllable per partial (all modes) with envelope.
Sophisticated modulation system that allows many Regen parameters to be controlled via MIDI, LFOs (24 per timbre), or driven by envelopes (24 per timbre).
Approx 300MB of sample space in memory = 100 mins @ 48Khz 24-bit mono shared across all active tracks and partials.

Hardware

Balanced stereo output through XLR connections at pro-level 4dBu. Designed for studio and home use. These are DC-coupled for maximum bass impact.
Single-ended TS stereo outputs, also DC-coupled.
Convenient headphones TRS jack for monitoring master audio with independent volume
control. For headphones in range 32O - 300O.
DAC circuit is designed for ultra-low noise floor. 11dB of headroom over nominal level. A
measured 130dB of dynamic range. 24-bit, 50kHz sample rate, as per Synclavier II.
Hybrid sound design engine: original Synlcavier II hardware is modelled in software.
High quality audio components throughout, including a precision temperature compensated crystal oscillator for jitter-free digital audio.
Two glorious full-colour sunken displays.
Responsive silicon back-lit parameter buttons.
The vertical value swiper is touch accurate to 128 levels of resolution for precise control
of every parameter.
12 selector buttons are touch-sensitive and can handle gestures to quickly select
multiple partials or tracks.
SD Card reader for unlimited user timbre and sample libraries.
4 USB accessory ports for MIDI keyboards, sequencers, and audio interfaces. Plus 1 USB Host port for connecting to a computer for MIDI input from a DAW.
Take it on the road. Rugged, full metal enclosure.

Notes: The Sloer Stereo Ambient Reverb builds on our popular Slo lineup but adds two additional reverb algorithms, stereo width control, two additional modulation wave shapes, and the ability to control the sample rate. Now you can create immersive, lush, modulated, sleepy, and ambient soundscapes with more width and depth than ever before.

Save your favourite dreamscapes with three onboard presets by simultaneously pressing and holding down on the bypass and sustain switches. Scroll through them by simultaneously pressing and releasing bypass and sustain.

The five-way rotary dial allows five different reverb modes - the three you know and love from the Slo: Dark (Lower Octave), Rise (Ambient Swell), and Dream (Latching Pad); and the addition of two new modes: Rain (Delay Tap Diffusion) and Light (High Octave Shimmer). Secondary functions on the dial change between five different wave shapes for modulation on the reverb trail.

Combine deep modulation, long washy trails, and an immersive stereo field to experience Sloer.

5 reverb modes:

DARK - Add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb.

RISE - This is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times.

DREAM - Lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and the pad will decrescendo according to where the decay knob is set. X knob sets the depth of vibrato applied to the reverb trail.

RAIN - Tappy and trippy, this program creates a unique effect with lower levels of diffusion allowing the reverb delay taps to audible create an echo-like effect within your reverb. Use the Xcontrol to set the amount of diffusion of the delay taps.

LIGHT - Bright and smooth reverb with an octave-up shimmer. Create a range of ethereal sounds with the X slider, keep it low for a smooth pad-like reverb or push it higher for a bright shimmer effect.

5 wave shapes

The Sloer also features five different wave shapes accessible by holding down bypass while switching the algorithm dial.

Sine - Smooth and even pitch up and down modulation.
Warp - Asymmetric pitch up modulation similar to a warped record.
Sink - Asymmetric pitch down modulation for sinking detune similar to a Bigsby.
Square - Symmetric pitch up and down modulation for stepped modulation.
Random - Uses sample and hold that picks new random values.

Momentary functions

Bypass: When the switch is in the off position, press and hold to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off, and fades it out.

Sustain: When pressed, the decay switch ramps up the reverb trail to maximum creating a long dreamy reverb trail, and then ramps back down to the decay knob setting when released. In the "Dream" algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad-like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.

Trails mode

The Sloer can run in trails or no trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no trails mode, the decay is abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

Preset spillover

When scrolling through presets, there is only preset spillover if the next preset is the same algorithm as the one preceding it. For example, if your red and green presets are both in Dream mode, switching from red to green will not cut your reverb trails.

Specs

The Sloer comes in a Lollipop Blue finish with light blue and off white ink featuring original artwork by Christi Du Toit OR a matte black finish with cream ink.
The die-cast enclosure's exact size is 4.79" x 3.62" x 2.25" including knobs.
Power requirements are 9VDC (100mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
Power supply not included.

Notes: The Sloer Stereo Ambient Reverb builds on our popular Slo lineup but adds two additional reverb algorithms, stereo width control, two additional modulation wave shapes, and the ability to control the sample rate. Now you can create immersive, lush, modulated, sleepy, and ambient soundscapes with more width and depth than ever before.

Save your favourite dreamscapes with three onboard presets by simultaneously pressing and holding down on the bypass and sustain switches. Scroll through them by simultaneously pressing and releasing bypass and sustain.

The five-way rotary dial allows five different reverb modes - the three you know and love from the Slo: Dark (Lower Octave), Rise (Ambient Swell), and Dream (Latching Pad); and the addition of two new modes: Rain (Delay Tap Diffusion) and Light (High Octave Shimmer). Secondary functions on the dial change between five different wave shapes for modulation on the reverb trail.

Combine deep modulation, long washy trails, and an immersive stereo field to experience Sloer.

5 reverb modes:

DARK - Add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb.

RISE - This is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times.

DREAM - Lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and the pad will decrescendo according to where the decay knob is set. X knob sets the depth of vibrato applied to the reverb trail.

RAIN - Tappy and trippy, this program creates a unique effect with lower levels of diffusion allowing the reverb delay taps to audible create an echo-like effect within your reverb. Use the Xcontrol to set the amount of diffusion of the delay taps.

LIGHT - Bright and smooth reverb with an octave-up shimmer. Create a range of ethereal sounds with the X slider, keep it low for a smooth pad-like reverb or push it higher for a bright shimmer effect.

5 wave shapes

The Sloer also features five different wave shapes accessible by holding down bypass while switching the algorithm dial.

Sine - Smooth and even pitch up and down modulation.
Warp - Asymmetric pitch up modulation similar to a warped record.
Sink - Asymmetric pitch down modulation for sinking detune similar to a Bigsby.
Square - Symmetric pitch up and down modulation for stepped modulation.
Random - Uses sample and hold that picks new random values.

Momentary functions

Bypass: When the switch is in the off position, press and hold to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off, and fades it out.

Sustain: When pressed, the decay switch ramps up the reverb trail to maximum creating a long dreamy reverb trail, and then ramps back down to the decay knob setting when released. In the "Dream" algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad-like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.

Trails mode

The Sloer can run in trails or no trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no trails mode, the decay is abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

Preset spillover

When scrolling through presets, there is only preset spillover if the next preset is the same algorithm as the one preceding it. For example, if your red and green presets are both in Dream mode, switching from red to green will not cut your reverb trails.

Specs

The Sloer comes in a Lollipop Blue finish with light blue and off white ink featuring original artwork by Christi Du Toit OR a matte black finish with cream ink.
The die-cast enclosure's exact size is 4.79" x 3.62" x 2.25" including knobs.
Power requirements are 9VDC (100mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
Power supply not included.

Notes: PanMix Jr is a high quality 3 channel mixer with manual panning and volume controls with dual concentric knobs. Each channel's output is separately available. Also channels 1 and 2 can be switched to be mixed with the subsequent channel, allowing for 1-1-1, 1-2, 3 mix configurations. Equal power pan law (3dB) is provided. Left and Right led indicators available for all three channels.

Several modules can be chained together via connections on the back side. This connection is possible with other Happy Nerding stereo modules too. At the moment PanMix Jr stereo output can be internally sent to another PanMix Jr, 3x Stereo Mixer and Isolator module. Or stereo signal can be received from another PanMix Jr, OUT, 3x Stereo Mixer, latest revision of PanMix.

55 mA +12V
55 mA - 12V
35 mm Depth
6 HP wide

Notes: PanMix Jr is a high quality 3 channel mixer with manual panning and volume controls with dual concentric knobs. Each channel's output is separately available. Also channels 1 and 2 can be switched to be mixed with the subsequent channel, allowing for 1-1-1, 1-2, 3 mix configurations. Equal power pan law (3dB) is provided. Left and Right led indicators available for all three channels.

Several modules can be chained together via connections on the back side. This connection is possible with other Happy Nerding stereo modules too. At the moment PanMix Jr stereo output can be internally sent to another PanMix Jr, 3x Stereo Mixer and Isolator module. Or stereo signal can be received from another PanMix Jr, OUT, 3x Stereo Mixer, latest revision of PanMix.

55 mA +12V
55 mA - 12V
35 mm Depth
6 HP wide

Notes: HN VCF is a state variable filter having 12 db Low Pass, 12 dB High Pass, 6 dB Band Pass plus 18 db Low Pass marked as "LP!", because it has extra drive. All three parameters: "Freq", "Resonance" and "Drive" have dual knobs with outer knobs controlling bipolar CV amount. These affected CVs are then shown by the relative green/blue LEDs.

The possibility to have CV over "Resonance" and "Drives" makes it a very capable 6 HP filter.

"LP!" output has 6 dB steeper slope (18 dB) compared to ordinary 12 dB "LP" output. Plus it has much more drive.

Dimensions
6 HP
35 mm deep

Current Draw
55 mA +12V
65 mA -12V

Notes: Black version of Elta's fantastic reboot of the legendary Polyvox filter. Stereo or dual mono operation, with precise control over all parameters and that classic filthy sound.

Supplier's Notes:
POLYVOX PF3 double-stereo filter utilizes the classic Soviet filter chip for a unique and iconic filter tone. Two independent 12dB multi-mode filters that can be controlled by a single cutoff knob. Turning the filter into a 24dB filter, when connected in series. When connected in stereo, you can achieve interesting effects by using different modes to each channel. A noise generator is on board pre-filter and can be used separately as a source of white and pink noise. Volume as well as clean and processed signal balance per channel. Can be used as two independent filters or stereo mode.

WARNING: Before using the device, turn it on for 5-7 minutes and let it stand. The control transistor should warm up. So that in SOFT mode there is no feedback when the FREQ knobs are in zero position. If you overdo it. The UD1208 chips used in the filter are very sensitive and are never the same. Therefore you will not mathematically get two identical filters. Which is an advantage when using the unit in stereo.

FILTER modes - Lowpass, Bandpass, Hi-pass, Notch.

NOISE generator - pink, white and channel balancing.

FILTER 1 and FILTER 2 - CV controls.

LINK switches to control two filters and CV at the same time with one slice knob.

SOFT/HARD cutoff control

Technical specifications:

Input audio signal level: Max 1.5 V
Modulation CV input: - 5 to +5 V or 0 to + 10V
Power supply: universal mains adapter 100-220V / 12V 1A out
Filter weight: 0,7kg
Packed weight: 1 kg
Dimensions: 175 x 135 x 50mm

Notes: The latest addition to the Roland family has its exclusive stand.

Specially designed for the Roland MC-707s.

Taking advantage of the shape of its cabinet to securely hold the equipment.

Achieving a very comfortable position during use.

These stands are lightweight, detachable, and take up very little space, perfect for live performers.

In the studio, they save space and improve the working position.

All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.

With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland MC-707s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland MC-707s.

Notes: In recent years, stereo signal paths have increasingly found their way into the wonderful world of Eurorack synthesis - so naturally, utilities should follow suit. Introducing psATT, a simple solution to a problem you might not even realise you had. Far from just useful as an attenuator for audio sources in mixdowns, the psATT can also be used to bring stereo audio signals down to more manageable levels (such as line level), attenuate multiple signals simultaneously (like increasing the modulation depth of two LFO's at the same time! It's like having two hands, but with one hand!) and is even normalled, so if you only have a mono signal, the attenuated signal will be present at both outputs. That's what utility is all about!

There's not much else to say, except that it's passive, and draws no power - and it looks very classy in black and gold; and it's also only 2hp.