100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 4,827 on page 1 of 97
1  2  3  ...  97  »
FORTHCOMING
Doepfer A-180-2v Multiples Module (vintage edition) Doepfer A-180-2v Multiples Module (vintage edition) Doepfer A-180-2v Multiples Module (vintage edition)
Cat: 751717 • View all Synth modules
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
coming soon $38.36
FORTHCOMING
Doepfer A-183-1 Dual Attenuator Module Doepfer A-183-1 Dual Attenuator Module Doepfer A-183-1 Dual Attenuator Module
Cat: 751728 • View all Synth modules
 
Dual passive attenuator - 4HP
Notes: Module A-183-1 is a simple passive dual attenuator. Passive means, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts like amplifiers or buffers and no power supply is required.

This is how the A-183-1 works: At the output socket appears the attenuated input signal, i.e. zero level at the fully CCW position and max. level and the fully CW position.

Applications:

Adjustable level of CV or audio signals to control other modules that do not have attenuators (e.g. Dual VCA A-132-1, Quantizer A-156, CV-to-Midi interface A-192 and modules of other manufacturers).
Read more
coming soon $39.98
FORTHCOMING
Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module
Cat: 751731 • View all Synth modules
 
Compact module for attenuating control voltage signals - 4HP
Notes: Module A-183-2 is a voltage offset generator combined with an attenuator/polarizer.

This is how the A-183-2 works: At the two output sockets (simply two connected sockets) appears a DC voltage that is adjusted with the Offset control in the range 0...+5V or -5V...+5V. An internal jumper is used to select the offset range (0...+5V or -5V...+5V). Other ranges are possible by changing a resistor on the pc board (e.g. 0...+10V or -10V...+10V). The DC voltage generated by the Offset control is overlaid by the attenuated voltage that is fed to the In socket. The function of the attenuator control can be set to Attenuator or Polarizer by means of a toggle switch. When the switch is in the Attenuator position the control works as an usual attenuator, i.e. zero level at the fully CCW position and max. level and the fully CW position. When the switch is in the Polarizer position the control works as a polarizer, i.e. zero level appears at the centre position. Right from the centre position the In signal is added to the offset voltage, left from the centre position the In signal is subtracted from the offset voltage. In other words: at the fully CW position the non-inverted In signal is added with the full level to the offset voltage, at the fully CCW position the inverted In signal is added with the full level to the offset voltage.

The amplification range for the input is about 0...+1 in the attenuator mode, and -1...+1 in the polarizer mode. The amplification range can be modified by replacing a resistor by another value.

Applications:

Generation of adjustable DC voltages overlaid by control voltages with adjustable level and polarity to control other modules that do not have attenuators or offset controls, e.g. Sampler A-112 (mainly for the wavetable mode), dual VCA A-132-1, VCLFO A-147-2 for waveshaping and ring modulator applications, Quantizer A-156, Theremin A-178, CV-to-Midi interface A-192 and modules of other manufacturers).
Read more
coming soon $45.39
FORTHCOMING
Doepfer A-183-3 Amplifier Module Doepfer A-183-3 Amplifier Module Doepfer A-183-3 Amplifier Module
Cat: 751740 • View all Synth modules
 
DC coupled amplifier - 4HP
Notes: Module A-183-3 is a simple amplifier. It is DC coupled and can be used for both CV and audio signals. The maximal amplification can be switched between 1, 2 and 4 (in position 1 the module does not work as a real amplifier but only as attenuator). The level can be adjusted by means of the Level control between zero and the chosen maximum amplification (1/2/4). Two overload LEDs indicate if the output signal goes beyond about +10V or becomes less than about -10V. Input and output are equipped with miniature 2-fold multiples (nothing but 2 connected sockets).

The main application of this module is to adapt differing audio or CV levels between different modules or systems. For example, LFO, ADSR or Gate levels between modules of different manufacturers can be increased or attenuated. But even audio signals can be attenuated or amplified up to 4. But the module cannot be used as an amplifier for external low level audio signals (e.g. microphones or electric guitars)!
Read more
coming soon $44.31
FORTHCOMING
Doepfer A-180-3 Dual Buffered Multiple Module Doepfer A-180-3 Dual Buffered Multiple Module Doepfer A-180-3 Dual Buffered Multiple Module
Cat: 751720 • View all Synth modules
 
Dual buffered 1-in-3 multiple module - 4HP
Notes: Module A-180-3 is a dual buffered 1-in-3 multiple. The signal applied to the input socket appears as a buffered signal at the three output sockets. Each output has its own buffer, i.e. the three output sockets are not simply connected to each other. The lower output of the upper unit is normalled in the factory to the input of the lower unit. That way the module works as a single 1-in-6 buffered multiple provided that no signal is applied to the input of the lower unit. But it's also possible to pick-up the bus CV and normalize the input socket of the lower unit to the bus CV.

Application: copying/buffering of CV, gate and audio signals.
Read more
coming soon $49.71
FORTHCOMING
Doepfer A-170v Dual Slew Limiter Module (vintage edition) Doepfer A-170v Dual Slew Limiter Module (vintage edition) Doepfer A-170v Dual Slew Limiter Module (vintage edition)
Cat: 751702 • View all Synth modules
 
Two separate slew limiters for generating portamento effects - 8HP
Notes: Module A-170 contains two separate slew limiters, also known as portamento controllers or integrators. The first SL has just one joint control, which sets both rise and fall times (c. 0 ...10 sec). The second SL has separate controls for rise and fall times, and can therefore be used as a simple AR envelope generator. Over and above this, you can set the overall range for these parameters, with a three-position switch, as on the full ADSRs.

Both slew limiters have two LEDs each, to show the state of the rising and falling voltages.


Additional technical remarks: If the upper slew limiter is used for precision applications (e.g. portamento/glide of one or more VCOs) a buffer (e.g. A-185-1 or A-185-2) is recommended between the A-170 output and the VCO(s) input(s). The reason is a small voltage drop that is caused by the protection resistor at the A-170 output. An A-185-1 or A-185-2 connected between the A-170 and the VCO(s) avoids that voltage loss. For all A-170 manufactured later than May 2009 (recognizable by the label "Version 2" on the pc board) this remark is not valid as these modules are equipped with an additional voltage buffer at the output.

The lower slew limiter cannot be used for precision applications because of the voltage loss caused by the diodes of the circuit.
Read more
coming soon $77.81
FORTHCOMING
Doepfer A-172 Maximum/Minimum Selector & Rectifier Module Doepfer A-172 Maximum/Minimum Selector & Rectifier Module Doepfer A-172 Maximum/Minimum Selector & Rectifier Module
Cat: 751706 • View all Synth modules
 
Module for processing/mixing of control voltages - 4HP
Notes: A-172 is a minimum/maximum selector module and is equipped with four analogue inputs and two analogue outputs (minimum, maximum). The main application of the module is the processing/mixing of control voltages, e.g. random voltages, ADSR, LFO, S&H, ribbon CV, theremin-CV and similar, but even for audio signal processing the module can be used (e.g. several outputs of the same or different VCOs).

The module permanently picks the maximum resp. minimum voltage out of the four input signals and outputs these voltages to the maximum resp. minimum jack socket.

To adjust offset and amplitude for each input independently (i.e. to bring the signal into the right "position" with the desired level) we recommend combining the module with the A-129-3 Slew Limiter/Attenuator/Offset Generator (see patch example below). The other sketch below shows the basic principle of the max/min module by means of three sine waves (e.g. three LFOs) with different frequencies and different levels.

The module can be used also as a simple half-wave rectifier.
Read more
coming soon $51.06
FORTHCOMING
Doepfer A-174-2 Modulation Wheels CV Source Module Doepfer A-174-2 Modulation Wheels CV Source Module Doepfer A-174-2 Modulation Wheels CV Source Module
Cat: 751707 • View all Synth modules
 
Modulation wheel module with two wheels - 14HP
Notes: A-174-2 is a modulation wheel module with two wheels. The factory setting is a spring loaded wheel at the left side with bipolar voltage output (i.e. 0V in centre position, positive voltage in the upper range, negative voltage in the lower range, voltage range about -5.5 V ... 0V ... +5.5 V) and a wheel without spring at the right side with positive voltage output (i.e. 0V in the lowest position and positive voltage when operated, voltage range about 0...+8 V). For the spring loaded wheel a voltage "plateau" around 0 V is preset (jumper) so that the output voltage is 0 V in a small area near the centre position.

By means of jumpers the factory settings can be changed. For each wheel two jumpers are available: one for the voltage range (positive or bipolar) and one for the voltage plateau around 0 V. If these settings are changed even the wheels have to be re-adjusted mechanically. Therefore, such modifications should be carried out by a qualified person only. By request the module is available from the factory even with two wheels both with or without springs (additional charges Euro 10.00 for each change).

Important note for module mounting: As the potentiometer of the left wheel projects about 10 mm the rim of the front panel a 2 or 4 HP blind panel has to be mounted left from the module - unless the module left to the A-174-1 has sufficient space in this area (e.g. A-174-1).
Read more
coming soon $77.81
FORTHCOMING
Doepfer A-177-2 External Foot Controller II Module Doepfer A-177-2 External Foot Controller II Module Doepfer A-177-2 External Foot Controller II Module
Cat: 751715 • View all Synth modules
 
Foot controller interface - 8HP
Notes: Economically priced module for connecting one foot controller and one double foot switch for control A-100 functions by means of the feet. For example, the frequency of a filter or the loudness can be controlled by a foot controller, but even other parameters like LFO frequency, modulation depth, phasing, pitch or any other voltage controlled parameter. The gate outputs controlled by the double foot switch can be used e.g. to trigger an envelope generator or to start/stop a sequencer. Even a single foot switch can be used if only one gate signal is required.

A special application of the A-177-2 is the usage within a Trautonium replica. The foot switches can be used to switch the mixtures of the subharmonic oscillator A-113. The foot controller can be used to control the overall loudness in combination with a VCA.

A-177 is compatible with the foot controllers FP5 and double foot switch VFP2. The Foot controller and double foot switch are not included with the module. If you want to use another foot controller or foot switch it has to be compatible to FP5 or VFP2.

If the foot controller FP5 is used the CV output range is about 0...+8V. The gate output levels are 0/+12V in combination with the VFP2 (foot switch not operated = 0V, foot switch operated = +12V).
Read more
coming soon $52.95
FORTHCOMING
Doepfer A-178 Theremin Control Voltage Source Module Doepfer A-178 Theremin Control Voltage Source Module Doepfer A-178 Theremin Control Voltage Source Module Doepfer A-178 Theremin Control Voltage Source Module
Cat: 751716 • View all Synth modules
 
Theremin controller module - 8HP
Notes: Theremin module for generating a variable control voltage by approaching/removing hand to/from an antenna. The distance range is about 30-40 cm. Additionally the module is equipped with a Gate output with adjustable threshold level. Controls/Inputs/Outputs: antenna input, offset (knob for zero adjust), 2 x CV out, 2 x LED (for CV control positive/negative and zero offset adjust).

To simulate the original Theremin two A-178, a VCO (e.g. A-110) and a linear VCA (e.g. A-130 or A-132) are required. But of course the A-178 can be used to control other functions in the A-100 (e.g. filter frequency, modulation depth and/or speed, tempo, attack/decay time and so on).

The CV output voltage of the A-178 can range - according to the setting of the front panel controls - from -10V...+10V. The gate output switches from 0V to about +10V.

Applications:

- Controlling any voltage controlled parameter of the A-100, e.g. pitch or pulsewidth (VCO A-110), loudness (VCA A-130/131/132), panorama (A-134), filter frequency or resonance (A-120/121/122/123), phasing (A-125), frequency shift (A-126), resonance peaks (A-127), envelope parameters (A-141/142), tempo (A-147)

- Triggering of A-100 activities via gate with adjustable threshold, e.g. starting an envelope (A-140/141/142), Start/Stop of a sequence (A-155), any switching function (A-150/151)

- Conversion into MIDI control change messages is possible with the A-192.

If two or more A-178 are used the distance between the modules/antennas should be at least 40-50 cm. Otherwise the antennas may affect each other.
Read more
coming soon $96.18
FORTHCOMING
Doepfer A-185-2 Precision Control Voltage Adder & Buffer Module Doepfer A-185-2 Precision Control Voltage Adder & Buffer Module Doepfer A-185-2 Precision Control Voltage Adder & Buffer Module
Cat: 751763 • View all Synth modules
 
Precision adder (mixer) and buffer for control voltages - 6HP
Notes: Module A-185-2 is a precision control voltage adder/buffer. Precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of VCOs (e.g. from keyboard + sequencer 1 + sequencer 2). Summing resistors matched to 0.1% are used to obtain an accuracy of 0.1% for the added voltages.

The module is equipped with four CV inputs: one with attenuator and three without attenuator. Each input is normalled to +1 V (i.e. if no plug is inserted the input contributes 1 V to the sum appearing at the output).

The input with attenuator can be used for common modulations (e.g. from an LFO, ADSR, Theremin, Pitch-Bender) for all VCOs connected to the output. The Lev.1 control is used to adjust the depth of the modulation, the first switch selects the polarity of the modulation. If no signal is connected to the first socket the attenuator works as a (fine) tuning knob because a voltage in the range 0...+1V (right position of the switch) or 0...-1V (left position of the switch) is added to the CV output.

The inputs without attenuators are planned to add control voltages coming out of keyboards, sequencers, Midi-to-CV interfaces, ribbon controllers or other CV sources that follow the 1V/oct standard. For example the CV of a keyboard can be used to transpose the CV coming from a sequencer, or the CV of a slow sequencer can be used to transpose the CV from a fast sequencer.

Each input is equipped with a three-position switch that determines if the corresponding voltage is added (right position), subtracted (left position) or if the input has no effect (centre position). If no plug is inserted the corresponding switch works as an octave switch for the lower three sections as the default 1 V are added or subtracted to the output voltage according to the switch position. The first switch can be used to add a variable voltage to the sum output. The variable voltage is adjusted with the Lev.1 control and the knob works then as kind of a (fine) tuning control.

The module is equipped with 4 outputs: three non-inverting and one inverting ouput. An internal jumper can be used to connect the non-inverted or inverted output to the CV line of the A-100 bus. That way the module can used to control several VCOs that are connected to the same bus board as the A-185-2 (same functionality as A-185-1).
Read more
coming soon $72.40
FORTHCOMING
Doepfer A-185-2v Precision Control Voltage Adder & Buffer Module (vintage edition) Doepfer A-185-2v Precision Control Voltage Adder & Buffer Module (vintage edition) Doepfer A-185-2v Precision Control Voltage Adder & Buffer Module (vintage edition)
Cat: 751764 • View all Synth modules
 
Precision adder (mixer) and buffer for control voltages - 6HP
Notes: Module A-185-2 is a precision control voltage adder/buffer. Precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of VCOs (e.g. from keyboard + sequencer 1 + sequencer 2). Summing resistors matched to 0.1% are used to obtain an accuracy of 0.1% for the added voltages.

The module is equipped with four CV inputs: one with attenuator and three without attenuator. Each input is normalled to +1 V (i.e. if no plug is inserted the input contributes 1 V to the sum appearing at the output).

The input with attenuator can be used for common modulations (e.g. from an LFO, ADSR, Theremin, Pitch-Bender) for all VCOs connected to the output. The Lev.1 control is used to adjust the depth of the modulation, the first switch selects the polarity of the modulation. If no signal is connected to the first socket the attenuator works as a (fine) tuning knob because a voltage in the range 0...+1V (right position of the switch) or 0...-1V (left position of the switch) is added to the CV output.

The inputs without attenuators are planned to add control voltages coming out of keyboards, sequencers, Midi-to-CV interfaces, ribbon controllers or other CV sources that follow the 1V/oct standard. For example the CV of a keyboard can be used to transpose the CV coming from a sequencer, or the CV of a slow sequencer can be used to transpose the CV from a fast sequencer.

Each input is equipped with a three-position switch that determines if the corresponding voltage is added (right position), subtracted (left position) or if the input has no effect (centre position). If no plug is inserted the corresponding switch works as an octave switch for the lower three sections as the default 1 V are added or subtracted to the output voltage according to the switch position. The first switch can be used to add a variable voltage to the sum output. The variable voltage is adjusted with the Lev.1 control and the knob works then as kind of a (fine) tuning control.

The module is equipped with 4 outputs: three non-inverting and one inverting ouput. An internal jumper can be used to connect the non-inverted or inverted output to the CV line of the A-100 bus. That way the module can used to control several VCOs that are connected to the same bus board as the A-185-2 (same functionality as A-185-1).
Read more
coming soon $79.97
FORTHCOMING
Doepfer A-184-1v Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module (vintage edition) Doepfer A-184-1v Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module (vintage edition) Doepfer A-184-1v Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module (vintage edition)
Cat: 751757 • View all Synth modules
 
4HP Eurorack module featuring a combination of 3 functions
Notes: Module A-184-1 is the combination of three functions:

- Ring Modulator
- Sample&Hold/Track&Hold unit
- Slew Limiter

The same functions are actually already available in other modules (e.g. A-114, A-148, A-170). But in many systems it's not necessary to have two ring modulators (A-114) or two S&H units (A-148) or two slew limiters (A-170) available. That's why we have compiled these function in one small 4 HP module.

The upper section is nothing but half of an A-114, i.e. a ring modulator with the usual X/Y inputs and the X*Y output. Inputs and outputs of this sub-unit are AC coupled, i.e. suitable only for audio signals. A detailed explanation of a ring modulator can be found on the A-114 info page.

The lower section is a Sample & Hold (S&H) / Track & Hold (T&H) unit (same as half of an A-148) followed by a slew limiter (same as the upper section the A-170). A toggle switch is used to set the mode to S&H or T&H. In S&H mode the unit picks out a sample from the voltage at the SH input at the rising edge of the trigger signal input. In T&H mode the output follows the input voltage as long as the level of the trigger signal is high. As soon as the trigger signal turns low, the last voltage is stored. The trigger input is internally normalled to high, i.e. the unit works just as a slew limiter in T&H mode when no trigger signal is applied.
Read more
coming soon $106.99
FORTHCOMING
Doepfer A-184-2 Voltage Controlled Crossfader & Triangle To Sine Waveshaper Module Doepfer A-184-2 Voltage Controlled Crossfader & Triangle To Sine Waveshaper Module Doepfer A-184-2 Voltage Controlled Crossfader & Triangle To Sine Waveshaper Module
Notes: Module A-184-2 is the combination of two functions and planned primarily as an expansion module for VCOs or LFOs (e.g. A-110-1, A-110-2, A-145, A-147-2).

Triangle-to-Sine Waveshaper:

The upper section is a very precise triangle-to-sine converter (thanks to Tim Stinchcombe who recommended this circuit). It can be used to convert any triangle waveform into a (nearly) perfect sine. The converter is much better than the simple diode converter used in the A-110-1, A-111-1, A-145 and A-147-2. Two trimming potentiometers are used to optimize the sine shape. The converter should be assigned to one VCO or LFO because the trimming potentiometers have to be re-adjusted if the input level or DC offset of the input signal changes. If the trimming potentiometers are deliberately mis-adjusted it can be used also as a waveshaper for non-sine waveforms (e.g. sine-shaped at the top of the signal and a peak at the bottom, even voltage controlled by applying an additional voltage to the waveshaping circuit, "circuit-bending" notes will be available).

The waveform converter is DC coupled and can be used also for low frequencies (e.g. LFO triangle waves).

Voltage Controlled Crossfader:

The lower section is a voltage controlled crossfader. It has two inputs A and B. The two signals are mixed together with variable percentage. When the manual control CF is fully CCW only signal A appears at the CF Out socket. When the manual control CF is fully CW only signal B appears at the CF Out socket. In the centre position of the manual control both signal appear with the same level. In addition a control voltage input CV with attenuator is available to enable voltage control of the crossfade.

Two LEDs display the crossfading shares of input A and B.

The crossfader uses two high quality VCAs (SSM2164). Inputs and outputs are DC coupled. Consequently it can be used for audio signals and slowly varying control voltages as well.

The sockets of the upper section (triangle and sine) are normalled to the inputs A and B of the crossfader section. That way the crossfader is used to fade between triangle and sine of the VCO or LFO connected to the waveshaper. If other signals are plugged into the input sockets A and B these signals are used for crossfading.

The main application is to fade between two different waveforms of a VCO or LFO or two different VCF outputs. But the module can be used for any other signals too as the waveshaper and crossfader sections are independent apart from the normalled sockets.
Read more
coming soon $81.59
FORTHCOMING
Doepfer A-185-1 Active Bus Access Module
Cat: 751760 • View all Synth modules
 
Provides input & output access to your Eurorack's internal CV/Gate bus
Notes: Active bus access module to feed CV and Gate into the A-100 bus (e.g. when using more than one frame or with external CV/Gate interfaces). Miniature jack sockets for CV In, Gate In, 2xCV Out, 2xGate Out, 2 LEDs for CV/Gate control

In general, the A-185 is recommended as soon as more than 2 VCO's (A-110, A-111) are controlled by the same control voltage source. Without interconnection of the A-185 in this case tuning inaccuracies (scale) may occur. The A-185 is mounted close to the VCOs. The controlling voltage for all VCOs is applied to the CV In socket of the A-185. By means of the CV line of the bus board the CV is connected to all VCOs at the same bus board.
Read more
coming soon $52.95
FORTHCOMING
Doepfer A-170 Dual Slew Limiter Module Doepfer A-170 Dual Slew Limiter Module Doepfer A-170 Dual Slew Limiter Module
Cat: 751699 • View all Synth modules
 
Two separate slew limiters for generating portamento effects - 8HP
Notes: Module A-170 contains two separate slew limiters, also known as portamento controllers or integrators. The first SL has just one joint control, which sets both rise and fall times (c. 0 ...10 sec). The second SL has separate controls for rise and fall times, and can therefore be used as a simple AR envelope generator. Over and above this, you can set the overall range for these parameters, with a three-position switch, as on the full ADSRs.

Both slew limiters have two LEDs each, to show the state of the rising and falling voltages.


Additional technical remarks: If the upper slew limiter is used for precision applications (e.g. portamento/glide of one or more VCOs) a buffer (e.g. A-185-1 or A-185-2) is recommended between the A-170 output and the VCO(s) input(s). The reason is a small voltage drop that is caused by the protection resistor at the A-170 output. An A-185-1 or A-185-2 connected between the A-170 and the VCO(s) avoids that voltage loss. For all A-170 manufactured later than May 2009 (recognizable by the label "Version 2" on the pc board) this remark is not valid as these modules are equipped with an additional voltage buffer at the output.

The lower slew limiter cannot be used for precision applications because of the voltage loss caused by the diodes of the circuit.
Read more
coming soon $62.68
FORTHCOMING
Doepfer A-175 Dual Voltage Inverter Module Doepfer A-175 Dual Voltage Inverter Module Doepfer A-175 Dual Voltage Inverter Module
Cat: 751709 • View all Synth modules
 
Two identical inverters - 4HP
Notes: Module A-175 (Dual Voltage Inverter) is exactly what it says it is: two identical inverters, which will take a voltage and output it in an inverted form - so that an input of +5 V will be output as -5 V, an input of -2 V will be output as +2 V, and so on. Two LEDs give a visual indication of the (positive or negative) output signal.
Read more
coming soon $52.95
FORTHCOMING
Doepfer A-176 Control Voltage Source Module Doepfer A-176 Control Voltage Source Module Doepfer A-176 Control Voltage Source Module
Cat: 751711 • View all Synth modules
 
Three independent voltage sources - 8HP
Notes: Module A-176 (Control Voltage Source) provides three voltage sources, to use wherever an extra CV is required. The top two voltage sources (CV 1 and CV 2) have controls for coarse and fine control of the voltage output; the third source (CV 3) just has the one control.

The range of the voltages output can be preset, either to 0 to +5 V or to -2.5 V to +2.5 V depending on your likely requirements. There is a jumper on the circuit board for each of the three voltage sources.

A typical use for the module would be to provide fine as well as coarse tuning for an A-110 standard VCO, (which, unlike the A-111, only has one tune control).

In general, this module will be useful whenever you need a manually controllable CV on a module which doesn't itself have a built-in control.
Read more
coming soon $62.68
FORTHCOMING
Doepfer A-186-1 Gate & Trigger Combiner & Rectifier Module Doepfer A-186-1 Gate & Trigger Combiner & Rectifier Module Doepfer A-186-1 Gate & Trigger Combiner & Rectifier Module
Cat: 751765 • View all Synth modules
 
Gate/trigger combiner - 4HP
Notes: Module A-186-1 is a very simple, passive unit that combines up to 7 gate, trigger or analog signals by or-wiring.

Function:

- If all seven inputs are low or open the output is low
- If one or more of the seven inputs is "high" the output turns high

Applications:

- Combination ("or"-wiring) of gate and/or trigger signals (e.g. from LFOs, sequencers, keyboards, Midi-to-CV interfaces, ribbon controller, theremin, trigger delays or any other source of gate/trigger signals
- Maximum extractor for analog voltages: at the output the maximum voltage (minus ~ 0.7V because of the diodes) appears, similar function as the maximum output of the A-172 Maximum/Minimum Selector module, e.g. for simple waveshaping
- Simple half-wave rectifier
Read more
coming soon $45.39
FORTHCOMING
Doepfer A-171-2v Voltage Controlled Slew Processor & Generator Module (vintage edition) Doepfer A-171-2v Voltage Controlled Slew Processor & Generator Module (vintage edition) Doepfer A-171-2v Voltage Controlled Slew Processor & Generator Module (vintage edition)
Notes: Module A-171-2 is a voltage controlled slew limiter with a lot of additional features beyond a simple slew limiter. It's mostly a licensed copy of Ken Stones VCS which is in turn based on the Serge VCS.

Typical applications:

- VC Slew Limiter / VC Portamento / VC Low Pass Gate:

Cycle switch = off, no trigger signal applied to Trig socket: Voltage controlled Slew limiter or portamento generator: the signal applied to the signal input is "slewed". The slew up and down times are controlled manually by means of the Up and Down controls, the effect of the CV Up and CV Down control voltages are controlled by the CV Up and CV Down controls, in exponential mode these controls also affect the slew shape (see symbols at the CCW and CW positions of the controls).

If an audio signal is applied an short slew rates are chosen the module works as a simple VCF/VCA combo.

- A/D Envelope Generator / Pulse Delay / Subharmonic Generator:

Cycle switch = off, trigger signal applied to Trig socket, no input signal: Simple Attack/Decay envelope Generator, the rise and fall times are controlled like the slew up/down times above, including the shape of the falling/rising slope of the envelope, the exp. CV input can be used to change both attack and decay simultaneously.

At the End output a pulse appears as the end of the envelope is reached (less than about 20mV), this can be used as a pulse delay.

If a series of triggers are applied to the VCS faster than the total rise and fall times, the module will divide the incoming signal by a whole number. In the audio range the output will be the sub-harmonic series.

- VCLFO / VCO:

Cycle switch = on, no trigger signal applied to Trig socket, no input signal: Voltage controlled LFO/VCO, the rise and fall times of the waveform are controlled like the slew up/down times above, including the shape of the falling/rising slope
the exp. CV input can be used like the CV input of a VCO or VCLFO, the response is exponential but not exactly 1V/oct.
Read more
coming soon $136.16
FORTHCOMING
Doepfer A-187-1 Voltage Controlled DSP Effects Module
Cat: 751766 • View all Synth modules
 
DSP based effects module - 18HP
Notes: Module A-187-1 is a DSP based effects module. Four parameters of the selected digital effect are voltage controlled. The main effect (e.g. reverb, delay, pitch-shifter, equalizer) is selected by the two small buttons effect up/down. The upper row of the display shows the effect that is currently selected. In the lower row the four parameters are shown as well as a small bar left from the abbreviation that displays the current parameter value. Each parameter can be adjusted manually (upper potentiometer row) and modified by external control voltages (lower row of the potentiometers and upper row of the sockets). The lower row of the sockets contains the two audio inputs and outputs.

Another button (bypass) is used to turn the effect on/off. When bypass is chosen the upper line of the display shows in turn "BYPASS" and the name of the pre-selected effect. In the bypass mode another effect can be pre-selected and called-up by pressing the bypass button again. Even the effect parameters can be adjusted and are displayed with the bar graphs. But they become effective not before the bypass mode is left.

The module is equipped with two audio inputs and two audio outputs because the DSP board features stereo audio processing. The audio inputs can process usual A-100 signal levels without clipping/distortion. For higher levels external attenuators (e.g. A-183-1) or VCAs may be used.

A ready-made DSP board is used inside the A-187-1 module. Consequently, only these effects and parameters are available that are supported by the DSP module. Some parameters can be changed only in steps or with audible artefacts. The DSP board has 20 Bit DA and AD converter with 32 kHz sample rate available. The inter sound processing uses 24 Bit.
Read more
coming soon $262.60
FORTHCOMING
Doepfer A-181 Multiples 2 Module Doepfer A-181 Multiples 2 Module Doepfer A-181 Multiples 2 Module
Cat: 751722 • View all Synth modules
 
Two multiples with one 1/4 jack socket & two 3.5mm jack sockets each
Notes: Doepfer's A-181 Multiples 2 is a simple multiple and cable format converter, suitable for translating 1/4" signals to 1/8" and vice versa. The upper mult is wired for monophonic signals, while the lower mult features a 1/4" stereo connector which offers direct 1/8" connection to the tip and ring, respectively, allowing use as a stereo splitter or dual 1/8" to stereo 1/4" converter.
Read more
coming soon $45.39
FORTHCOMING
Doepfer A-182-1 Switched Multiples Module Doepfer A-182-1 Switched Multiples Module Doepfer A-182-1 Switched Multiples Module
Cat: 751724 • View all Synth modules
 
Eurorack passive multi-connector - 6HP
Notes: Module A-182-1 is a simple passive multi-connector similar to the multiples modules A-180-1/A-180-2. In contrast to modules A-180-1/2 each socket is equipped with a 3-position switch that allows to connect the corresponding socket to the internal bus #1 (left position), bus #2 (right position) or to turn the socket off (centre position).

Examples:

- All switches in left position or all switches in right position: 8-fold multiple

- Four switches in left position and four switches in right position: two 4-fold multiple

- X switches in left position, Y switches in right position and Z switches in centre position: two separate multiples with some sockets turned off
Read more
coming soon $52.95
FORTHCOMING
Doepfer A-184-1 Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module Doepfer A-184-1 Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module Doepfer A-184-1 Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module
Cat: 751756 • View all Synth modules
 
4HP Eurorack module featuring a combination of 3 functions
Notes: Module A-184-1 is the combination of three functions:

- Ring Modulator
- Sample&Hold/Track&Hold unit
- Slew Limiter

The same functions are actually already available in other modules (e.g. A-114, A-148, A-170). But in many systems it's not necessary to have two ring modulators (A-114) or two S&H units (A-148) or two slew limiters (A-170) available. That's why we have compiled these function in one small 4 HP module.

The upper section is nothing but half of an A-114, i.e. a ring modulator with the usual X/Y inputs and the X*Y output. Inputs and outputs of this sub-unit are AC coupled, i.e. suitable only for audio signals. A detailed explanation of a ring modulator can be found on the A-114 info page.

The lower section is a Sample & Hold (S&H) / Track & Hold (T&H) unit (same as half of an A-148) followed by a slew limiter (same as the upper section the A-170). A toggle switch is used to set the mode to S&H or T&H. In S&H mode the unit picks out a sample from the voltage at the SH input at the rising edge of the trigger signal input. In T&H mode the output follows the input voltage as long as the level of the trigger signal is high. As soon as the trigger signal turns low, the last voltage is stored. The trigger input is internally normalled to high, i.e. the unit works just as a slew limiter in T&H mode when no trigger signal is applied.
Read more
coming soon $96.18
Houghton Annual 2019 (paperback book)(2 per customer)
Cat: 746448 Rel: 04 Sep 19 • View all Books
 
147 page book showcasing the Houghton Festival
Notes: Houghton Festival has become a symbolic reminder of the integrity and resilience of the dance and electronic music community in the face of sometimes challenging and unprecedented circumstances. This much is clear following the cancellation of the festival several weeks back...

Upon arrival each guest was due to be provided with a book showcasing the creative values and personality behind what has become much more than a festival. Whilst originally intended as a gift for festival attendees we are now happy to present this as a cultural offering: a book spanning 147 pages featuring hand drawn illustrations, photography, long form interviews, think pieces, musical reflection and beyond...

The annual is a collaboration between Ransom Note and Houghton.
Read more
 More than 10 in stock $0.01
Cat: 699418 Rel: 14 Aug 18 • View all DJ styluses
 
Replacement stylus
Notes: Tonar replacement needle/stylus for Shure M-44-7. Diamond tip.
Read more
 More than 10 in stock $19.44
Cat: 734890 Rel: 15 Oct 19 • View all Synth modules
 
Multi effects module - 6HP
Notes: Milky Way is a multi effects module with stereo signal flow. Its algorithms are already known from the Blck_Noir and the Grand Terminal.

- Simple and effective 6hp stereo* FX module
- Comes with "T.F.D" firmware installed: 16 types of effects are available, sorted in two banks
- Meta CV effects scanning
- Volume control with VCA

*depending on the effect type
Read more
 2 in stock $180.46
FORTHCOMING
Electro Harmonix Nano Operation Overlord Allied Overdrive Pedal
coming soon $85.36
Cat: 734886 Rel: 15 Oct 19 • View all Synth modules
 
Stereo filter with voltage controlled resonance - 6HP
Notes: Versatile stereo digital filter based on Endorphin's Grand Terminal module. CV-controlled cutoff, resonance and separate high-pass filter. Simple but effective.

Supplier notes:
The Squawk Dirty To Me is a stereo filter with voltage controlled resonance. It features eight filter modes and zero-delay feedback.

- Simple and effective 6hp stereo VCF
- 8 filter modes available with meta CV scanning, famous zero-delay feedback Grand Terminal filters
- Additional hi-pass filter in series quickly cuts the boomy low end
Read more
 3 in stock $180.46
Cat: 734884 Rel: 15 Oct 19 • View all Synth modules
 
6HP VCO with auto-tuning & octave shift
Notes: The Endorphin.es Godspeed is sort of the single oscillator version of the famous Furthrrr Generator. From its big brother it takes over the digital Thru-Zero core and the legendary wavefolder. But it also has new features like a sub-oscillator output and an immensely practical autotune function.

Especially for people starting with a modular system this oscillator is highly recommended. On 6HP it delivers all the features (and more) needed for diving into the depths of West-Coast-Synthesis!
Read more
 3 in stock $253.95
Cat: 731214 Rel: 15 Oct 19 • View all Synth modules
 
4-channel sequencer - 36HP
Notes: USTA is a 4×4 tracks sequencer for voltages and gates with variable stage duration, designed to quickly see and edit multiple voltage relationships in real time.

Variable stage duration means that every single stage duration can be individually set in relation to the clock, instead of being constrained to a one-to-one ratio (i.e. one stage per every clock impulse).

4×4 tracks means that every stage can store and generate up to four separate voltages (two CVs and two gates), and that up to four independent stage sequences can be arranged into as many different tracks.

Its architecture is based on an array of 16 'Stages' which form a 'Pattern'; 16 patterns form a 'Track', and four tracks form a 'Project'. Within each track, each stage can provide two gates and two CVs, and a wide set of options is available to define and modify the value of each output ('Layers') and the way it is played ('Colours').

Every Stage is related to a dedicated stepped encoder for quick and intuitive editing, and all the 16 encoders are arranged in an oval layout with a circular playhead. Every encoder is surrounded by a ring of 16 LEDs and a RGB led, to provide a visual feedback of the current setting of that step basing on the layer you are working on (like raw CV, quantized CV, length, gate...) and the way it should play depending on the RGB colour.
Read more
 1 in stock $711.08
Cat: 751762 Rel: 15 Oct 19 • View all Vinyl storage & shelves
 
Plastic LP storage rack, in orange
Notes: The Audio Anatomy Vinyl-Record Stand made from high impact polystyrene is very durable and very lightweight at the same time. It impresses with its trendy retro design, which offers space for 40 records in a simple way. The Audio Anatomy Vinyl-Record Stand is produced in Germany.
Read more
 1 in stock $17.28
Notes: Exclusive to Juno the Mukatsuku Carbon Steel Ring Record Disc Stabilizer is Europe's best selling label branded Ring Stabilizer specifically made for 7 inch dinked 45rpm records and can put used on its own directly placed onto the record before playing or in conjunction with most metal 45rpm adapters or the Mukatsuku 45 Twister. No springs, clips or screws required, just place the Mukatsuku Ring disc stabilizer on the record on the spindle and hey presto, you can obtain tighter bass and sweeter treble, as well as improved dynamics / less distortion bringing the record into more intimate contact with the platter.

In this version a heavy dome aluminium 45rpm adapter is included to use either in conjunction with the ring stabilizer on its own for any dinked 7 inch record.

The Mukatsuku ring disc stabilizer is great for DJ use in a club environment or when recording from vinyl to digital. It may even possibly help dished records or skipping 45rpm 7 inch records. The weight keeps the record tight to the platter and is cut from 10mm carbon steel, and then coated in a black plastic powder paint finish. As used by Ollie from Herbaliser.
Read more
 2 in stock $24.84
40 Live: Curaetion 25 + Anniversary (2xBlu-ray (PAL, region 2))
Cat: 743419 Rel: 18 Oct 19 • View all DVDs & Blu-Ray
 
2xBlu-ray box set of live performances from 2018 to mark the 40th anniversary of the band
Notes: CURAETION-25: From There To Here | From Here To There

Captured on the tenth and final night of the 25th Meltdown Festival (curated by lead singer Robert Smith) at London's Royal Festival Hall in June 2018. Smith, Simon Gallup, Jason Cooper, Roger O'Donnell, and Reeves Gabrels performed a song from each of their 13 studio albums in chronological order, displaying the evolution of The Cure's music live on stage.

ANNIVERSARY: 1978-2018 Live In Hyde Park London

The band's acclaimed 29-song, 135-minute anniversary concert. Filmed in one of London's Royal Parks to a crowd of 65,000 fans, The Cure presented a four-decade deep set on July 7, 2018, including "Just Like Heaven," "Lovesong," "High," and "The End Of The World." Adding to the experience, the band is back-dropped by giant screens displaying footage that complements the unique moods and emotive song writing that established The Cure as pioneers of alternative rock.
Read more
 2 in stock $24.95
Cat: 751591 Rel: 14 Oct 19 • View all Audio cables
 
Audio cable with 2 x 2 RCA leads - 0.3 metre length
Notes: Construction: 2 x 0.22 mm audio cable
Length: 0.3 m
Plug A: 2 x RCA (M)
Plug B: 2 x RCA (M)
Colour: Black
Weight: 0.04 kg
Read more
 More than 10 in stock $1.13
Cat: 751592 Rel: 14 Oct 19 • View all Audio cables
 
Audio cable with 2 x 2 RCA leads - 0.6 metre length
Notes: Construction: 2 x 0.22 mm audio cable
Length: 0.6 m
Plug A: 2 x RCA (M)
Plug B: 2 x RCA (M)
Colour: Black
Weight: 0.05 kg
Read more
 More than 10 in stock $1.35
Cat: 751749 Rel: 17 Oct 19 • View all Record sleeves
 
100 x deluxe 12" inner sleeves with anti-static foil lining
Notes: The Audio Anatomy Vinyl-Inner Sleeves are an indispensable accessory for any vinyl collector. Made in Germany, the interior consists of an antistatic foil lining (low density polyethylene) and the exterior is of paper. The paper has a die-cut centre hole on both sides and corresponds to the universal size of the 12? record. The Audio Anatomy Vinyl-Inner Sleeves provide easy and efficient protection against dust, fingerprints and moisture, resulting in improved sound quality and increased longevity of your vinyl records. To keep your vinyl records clean, we recommend cleaning them regularly with Audio Anatomy Cleaning Brushes and Audio Anatomy Cleaning Cloths.

- Antistatic foil lining
- Die-cut centre hole on both sides
- Universal size for 12" vinyl records
- Produced in Germany
Read more
 1 in stock $25.67
Cat: 751767 Rel: 16 Oct 19 • View all Vinyl cleaning
 
High quality microfibre cloth
Notes: The Audio Anatomy Vinyl-Cleaning Cloth made of high-quality microfibre is an indispensable cleaning accessory for your vinyl collection. Because of its very generous dimensions 40 x 40 cm it is very easy to use. It allows wet- and dry cleaning and very efficiently removes fingerprints and dust. In order to remove dirt that will accumulate in the high-quality microfibre cloth when cleaning your records, it can be machine washed up to 60 degrees.

In order to also keep your vinyl clean from dust after the application of the Audio Anatomy Vinyl-Cleaning Cloth, we recommend to store your vinyl in the antistatic Audio Anatomy Inner Sleeves.
Read more
 2 in stock $10.54
Cat: 751779 Rel: 16 Oct 19 • View all Record sleeves
 
25 x transparent PVC outer sleeves for 12" records
Notes: The Audio Anatomy Vinyl-Outer Sleeves are the indispensable accessory for any vinyl collector. They provide easy and efficient protection against dust, fingerprints and moisture, resulting in improved sound quality and increased longevity of your vinyl records and vinyl covers. To keep your vinyl records clean, we recommend keeping them in the antistatic Audio Anatomy Inner Sleeves and cleaning your records regularly with Audio Anatomy Cleaning Brushes and Audio Anatomy Cleaning Cloths.

- Made from transparent certified PVC (Polyvinyl Chloride)
- Perfect protection against dust, fingerprints and moisture
- Universal size for 12" vinyl records
- Produced in the EU
Read more
 2 in stock $13.51
Cat: 751750 Rel: 17 Oct 19 • View all Record sleeves
 
25 x deluxe 12" inner sleeves with anti-static foil lining
Notes: The Audio Anatomy Vinyl-Inner Sleeves are an indispensable accessory for any vinyl collector. Made in Germany, the interior consists of an antistatic foil lining (low density polyethylene) and the exterior is of paper. The paper has a die-cut centre hole on both sides and corresponds to the universal size of the 12? record. The Audio Anatomy Vinyl-Inner Sleeves provide easy and efficient protection against dust, fingerprints and moisture, resulting in improved sound quality and increased longevity of your vinyl records. To keep your vinyl records clean, we recommend cleaning them regularly with Audio Anatomy Cleaning Brushes and Audio Anatomy Cleaning Cloths.

- Antistatic foil lining
- Die-cut centre hole on both sides
- Universal size for 12" vinyl records
- Produced in Germany
Read more
 4 in stock $11.88
Cat: 749863 Rel: 15 Oct 19 • View all Synthesisers
 
Portable monophonic synthesiser
Notes: Powerful synthesis in the palm of your hand. The Modal Electronics Craft Synth is a very small, yet incredibly capably synthesiser. It features a monophonic synthesis engine that will allow you to create or craft any sound you can imagine. The eight oscillators offer a very wide scope for sound design. If you have a sound in your head that you want to make a reality then the Craft Synth delivers. Featuring everything you would expect from a top end synthesiser in today's high end market, the Craft Synth shrinks it all down into a portable synthesiser that is perfect for creating music in the studio or for performing live. Effects, filters, tuning, envelopes - Craft Synth has it all!
Read more
 4 in stock $139.41
40 Live: Curaetion 25 + Anniversary (2xDVD (PAL, region 2))
Cat: 743417 Rel: 18 Oct 19 • View all DVDs & Blu-Ray
 
2xDVD box set of live performances from 2018 to mark the 40th anniversary of the band
Notes: CURAETION-25: From There To Here | From Here To There

Captured on the tenth and final night of the 25th Meltdown Festival (curated by lead singer Robert Smith) at London's Royal Festival Hall in June 2018. Smith, Simon Gallup, Jason Cooper, Roger O'Donnell, and Reeves Gabrels performed a song from each of their 13 studio albums in chronological order, displaying the evolution of The Cure's music live on stage.

ANNIVERSARY: 1978-2018 Live In Hyde Park London

The band's acclaimed 29-song, 135-minute anniversary concert. Filmed in one of London's Royal Parks to a crowd of 65,000 fans, The Cure presented a four-decade deep set on July 7, 2018, including "Just Like Heaven," "Lovesong," "High," and "The End Of The World." Adding to the experience, the band is back-dropped by giant screens displaying footage that complements the unique moods and emotive song writing that established The Cure as pioneers of alternative rock.
Read more
 4 in stock $21.13
FORTHCOMING
40 Live: Curaetion 25 + Anniversary
Cat: 743413 Rel: 25 Oct 19 • View all DVDs & Blu-Ray
 
2xDVD and 4xCD deluxe box set of live performances from 2018 to mark the 40th anniversary of the band
Notes: CURAETION-25: From There To Here | From Here To There

Captured on the tenth and final night of the 25th Meltdown Festival (curated by lead singer Robert Smith) at London's Royal Festival Hall in June 2018. Smith, Simon Gallup, Jason Cooper, Roger O'Donnell, and Reeves Gabrels performed a song from each of their 13 studio albums in chronological order, displaying the evolution of The Cure's music live on stage.

ANNIVERSARY: 1978-2018 Live In Hyde Park London

The band's acclaimed 29-song, 135-minute anniversary concert. Filmed in one of London's Royal Parks to a crowd of 65,000 fans, The Cure presented a four-decade deep set on July 7, 2018, including "Just Like Heaven," "Lovesong," "High," and "The End Of The World." Adding to the experience, the band is back-dropped by giant screens displaying footage that complements the unique moods and emotive song writing that established The Cure as pioneers of alternative rock.
Read more
coming soon $45.38
Cat: 751585 Rel: 14 Oct 19 • View all DJ mixers
 
2-channel DJ mixer with Bluetooth and MP3 player in miniature design - silver
Notes: - Super portable and lightweight DJ mixer
- 2 stereo channels with gain control and 2-band EQ, RCA connectors
- Integrated Bluetooth audio streaming for your smartphones and tablets
- MP3 player with USB port and blue LCD screen
- Adjustable microphone input via 6.3 mm jack
- Adjustable headphones output via 6.3 mm jack for pre-fader listening (CUE)
- 2 adjustable master outputs via RCA connectors
- Crossfader
- Anodized metal housing
- Operation via supplied power unit
Read more
 2 in stock $73.00
Cat: 751587 Rel: 14 Oct 19 • View all DJ mixers
 
2-channel DJ mixer with Bluetooth and MP3 player in miniature design - gold
Notes: - Super portable and lightweight DJ mixer
- 2 stereo channels with gain control and 2-band EQ, RCA connectors
- Integrated Bluetooth audio streaming for your smartphones and tablets
- MP3 player with USB port and blue LCD screen
- Adjustable microphone input via 6.3 mm jack
- Adjustable headphones output via 6.3 mm jack for pre-fader listening (CUE)
- 2 adjustable master outputs via RCA connectors
- Crossfader
- Anodized metal housing
- Operation via supplied power unit
Read more
 1 in stock $63.76
Cat: 751588 Rel: 14 Oct 19 • View all DJ mixers
 
2-channel DJ mixer with Bluetooth and MP3 player in miniature design - red
Notes: - Super portable and lightweight DJ mixer
- 2 stereo channels with gain control and 2-band EQ, RCA connectors
- Integrated Bluetooth audio streaming for your smartphones and tablets
- MP3 player with USB port and blue LCD screen
- Adjustable microphone input via 6.3 mm jack
- Adjustable headphones output via 6.3 mm jack for pre-fader listening (CUE)
- 2 adjustable master outputs via RCA connectors
- Crossfader
- Anodized metal housing
- Operation via supplied power unit
Read more
 2 in stock $63.76
Cat: 751584 Rel: 14 Oct 19 • View all DJ mixers
 
2-channel DJ mixer with Bluetooth and MP3 player in miniature design - green
Notes: - Super portable and lightweight DJ mixer
- 2 stereo channels with gain control and 2-band EQ, RCA connectors
- Integrated Bluetooth audio streaming for your smartphones and tablets
- MP3 player with USB port and blue LCD screen
- Adjustable microphone input via 6.3 mm jack
- Adjustable headphones output via 6.3 mm jack for pre-fader listening (CUE)
- 2 adjustable master outputs via RCA connectors
- Crossfader
- Anodized metal housing
- Operation via supplied power unit
Read more
 2 in stock $63.76
Cat: 751594 Rel: 14 Oct 19 • View all Audio cables
 
Audio cable with 2 x 2 RCA leads - 1.5 metre length
Notes: Construction: 2 x 0.22 mm audio cable
Length: 1.5 m
Plug A: 2 x RCA (M)
Plug B: 2 x RCA (M)
Colour: Black
Weight: 0.09 kg
Read more
 2 in stock $2.11
Cat: 751595 Rel: 14 Oct 19 • View all Audio cables
 
Audio cable with 2 x 2 RCA leads - 3 metre length
Notes: Construction: 2 x 0.22 mm audio cable
Length: 3 m
Plug A: 2 x RCA (M)
Plug B: 2 x RCA (M)
Colour: Black
Weight: 0.14 kg
Read more
 1 in stock $2.86
Cat: 751576 Rel: 14 Oct 19 • View all DJ mixers
 
2-channel DJ mixer with Bluetooth and MP3 player in miniature design - black
Notes: - Super portable and lightweight DJ mixer
- 2 stereo channels with gain control and 2-band EQ, RCA connectors
- Integrated Bluetooth audio streaming for your smartphones and tablets
- MP3 player with USB port and blue LCD screen
- Adjustable microphone input via 6.3 mm jack
- Adjustable headphones output via 6.3 mm jack for pre-fader listening (CUE)
- 2 adjustable master outputs via RCA connectors
- Crossfader
- Anodized metal housing
- Operation via supplied power unit
Read more
 2 in stock $63.76
Items 1 to 50 of 4,827 on page 1 of 97
1  2  3  ...  97  »

Filter

Saved Searches
Save current search
Release Date
Close