Search dance music

Notes: Full-blooded distortion - Pit Viper is a solid state overdrive for hard-boiled musicians. The circuit can generate clean, beefy signal boosts. However, its true strengths lie in aggressively screaming distortions with a tangible character.

Pit Viper comes equipped with the following control elements:

- Toxicity: Gain potentiometer - Please turn up for heavy distortion.
- Hiss: Tone knob - Turn clockwise to cut the treble.
- Venom: Volume potentiometer
- Fear: Three-stage soft clipping switch - Activates normal soft clipping or a more tube-like version with less treble.
- Malice: Three-stage hard clipping switch - Activates beefy hard clipping or a spongier version with less treble.
- Blend: Dry / Wet potentiometer
- Bite: CV input plus attenuator to cut the high frequency range. Without a cable plugged in, the knob can be used for adjusting the treble manually.
- Saturation: CV input plus attenuator and on/off switch to influence gain and saturation.
- Filter: CV input plus attenuator and on/off switch to control the Viper's VCF circuit.

Via a jumper on the circuit board, users can choose between several filter types:

- Passive clipped low pass
- Unbuffered high pass
- Buffered high pass
- Buffered low pass

Furthermore, there is a trim potentiometer on the circuit board, which can be used to adjust the gain.

PLEASE NOTE: Any scratches on the front panel are part of the Pit Viper's design.

Notes: A four channel mixer, suitable for audio or control signals. It features regular and inverted outputs as well as an LED level meter.

Specifications:
Current needs: +12V: 21mA, -12V: 10mA
Width: 5 HP
Depth: 20mm (including power connector)
Aluminiun, heat-treated front panel.
Designed, kits prepared and completed modules assembled in Barcelona.

Notes: A compact attenuverting (attenuator-inverter) joystick controller and Gate Generator. With it, you can generate and process two control voltages using only one hand. Provided controls for CV ranges and offset adjust the boundaries of your control, this way it never gets out of the desired range, ensuring sensibility and playability even with wild performance gestures.

Specifications

Current needs: +12V: 25mA, -12V: 10mA
Width: 12 HP
Depth: 35mm (including power connector)
Aluminium, heat-treated front panel.
Designed, kits prepared and completed modules assembled in Barcelona.

Notes: The mini Innofader Plus is the new upgrade part which will replace the mini Innofader PNP P. The cut point has 0.1mm precision combined with a lightning fast 1msec response time. And now you can hook it up to an innoJUSTER to ensure you get the hairline precision cut point exactly where you want it on the fly!

The installation process is now greatly simplified. Low profile connectors ensure that you do not have to worry about breaking any cables. The button is now easier to press. And the adjustments now can be done with simpler swipe movements.

Notes: Delay is a flexible, full-featured delay audio processor. CV over all parameters provides dynamic access to its nuanced controls. The feedback path ranges from slapback to infinity, allowing for wild permutations of the original signal.

With delay times from milliseconds to nearly two seconds, Delay is sure to find a use in every patching situation. Add subtle echo to a melodic line, or crank up the feedback and hear a bed of layered sounds to bury your listeners in.

Notes: Lipsk facilitates the inversion of the individual bits produced by Drezno (or any other module connected to its input header at the back), and delivers the resulting code to its output header. Bit inversion can be manually controlled by pressing any of combination of its eight illuminated buttons, or it can be automated by patching gate signals into its gate input sockets. An active (5V) gate flips the state of the respective bit. If the button is active (bit already flipped), then the gate flips the bit again yielding double inversion (no inversion). The corresponding LEDs show the combined effect of both manual and gate actions. The bit processing logic is hardware-based, so there is virtually no latency, allowing the binary signals to be manipulated at extreme rates.

Notes: The PDR-369 XLR Patch Bay by Hosa Technology is designed to provide 12 channels of balanced audio throughput for any situation. It is ideal for making rear-panel microphone mixer inputs easier to reach. Features include:

- Rolled-steel chassis for rugged durability and ease of repair
- Gold-plated contacts for corrosion resistance and superior signal transfer
- Shielded, Oxygen-Free Copper conductors for enhanced signal clarity

Connectors: XLR3F to XLR3M

Notes: Tune is a multi-scale pitch quantizer. It features 11 scales ranging from chromatic to octatonic with everything in between. In addition, the bias control allows the user to transpose the melody to a different octave or starting note.

This functionality opens up every musical mode for each of its 11 scales and provides a performable control for transforming melodies on the fly.

Notes: This is a precision active buffer and multiple. This module has outstanding performance: it features very high input impedance, very low output impedance and an offset voltage of <1mV.

Not all active multi's are born equal, some designs do not fully solve impedance mismatch and tracking problems, or they apply offset voltages to the output and in rare cases can cause more problems than they solve!

AJH Synth have added a very useful (and unique) feature to cure tracking problems: four of the five outputs can be adjusted up or down by +/-5% from the front panel, so that VCO's and VCF's that don't track 1V/Oct exactly can be easily compensated to track correctly without having to re-calibrate the VCO or VCF themselves.

Notes: An advanced, feature laden, stereo overdrive and distortion pedal with a broad range of options and controls. With the Operation Overlord - whether you play keyboards, guitar, bass or pretty much any electronic instrument - dialling in great drive sounds is fast and fool-proof. Active, Treble, Mid and Bass controls, a foot-switchable Boost mode and a dry blend deliver superlative sound shaping. It even features two independent channels for use with stereo setups. Whatever your rig, the Overlord is your indispensable ally.

Notes: EHX has grafted technology found in keyboard and modular synthesizers into a pedal designed for guitarists and bass players. The Blurst modulates an instrument's sound like an envelope filter, but instead of the filter's response being controlled by playing dynamics, it's controlled by an internal oscillator. The Blurst is a must have for the adventurous player who wants to explore new sonic territory!

Introducing the Blurst, a radical modulating filter. It's an effect often used on synthesizers, but we've designed the Blurst especially for guitar players and bassists who want to explore new sonic territory.

It features an analog, low pass filter with adjustable resonance, three modulation waveform shapes, tap tempo with tap divide and EXP control over Range, Rate or Filter. An EHX 9.6DC/200 AC adapter is included.

The Blurst is a must have for the experimental musician and works well with an expression pedal, the EHX 8-Step Program and other control voltage sources. Whether used alone or with other effects, the Blurst's hypnotic effects are spellbinding!

Notes: Arcade-themed synth from Teenage Engineering's amazing Pocket Operator range. Tiny portable synth with quirky chiptune-style sounds, built-in sequencer effects. Super fun.

Supplier's notes:
Arcade synthesizer and sequencer, with parameter locks, chord control and punch-in effects.

All pocket operator models perfectly complement each other. From drum machine, bass and lead synthesisers to noise percussion, the six unique units allow you to start a pocket band. Use them separately or connect them together, the choice is yours.

Use the built-in speaker for instant sound, connect a pair of headphones for detailed personal listening, or hook up a speaker system and the club will go boom!

Pocket operators are designed on a single multiple-layer circuit board using high quality components. They all share a compact and durable form factor.

By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Optional extras:
Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons. Use the SP-10 display protection to protect the LCD screen, and start a jam sync session with your friends using the MC-3 mini cables.

Notes: Dual xFade is a compact voltage controlled crossfader suitable for both audio and CVs. Smaller knobs set manual crossfade between A<>B, and bigger knobs are CV attenuverters. LEDs show the adjusted positive and negative CV sides for easy monitoring.

Upper inputs (section 1) are normalled to lower inputs (section 2). Thus the same signal pair A&B can be differently crossfaded in both sections.

The switch clones section's 1 controls to the section 2, which is useful to make stereo Dry/Wet adjustment or stereo VCA.

This module can be used as:

two independent crossfades

two independent VCAs

stereo crossfade or Dry/Wet control

stereo VCA

panner

Four jumpers on the back can give optional 5x amplification for each A or B input. Sot it is easy to crossfade modular level with linear level from pedals. Installed jumpers give 1x amplification, removing jumpers gives 5x amplification.

Output 1 is mixed with output 2 if left unconnected.

Notes: Pico EF is Erica Synths' take on envelope follower module in 3hp! Pico EF features a preamp with +40dB gain (enough to boost even guitar and dynamic microphone signals for use in a modular system), envelope output with adjustable attack time and a gate output with adjustable threshold. The Pico EF can be used as a preamp, overdrive unit or for controlling VCFs with audio signal, or to use with external instruments to control your modular system in other creative and experimental applications.

Technical specifications:

Preamp boost: up to +40dB
Audio output level: 10Vptp
Envelope output level: 0 - +10V
Gate level: +5V
Power consumption: 25mA, -15mA
Module width: 3HP
Module depth: 35mm

Notes: Incredible sounding VCO module that helps you get incredibly rich signals out of your synthesizer. The Dreadbox Hysteria VCO features a huge frequency range of 16hZ to 32kHz. This gives you a lot of functional pitch to work with, allowing you to explore the sounds capable from this module.

The sounds themselves rest on a variable waveform selector - meaning you can scroll through the waveforms and blend them together. This can even be CV controlled, so you can obtain an evolving sound that changes over time. The modules in the Chromatic series give you a great starting point in the world of modular synths and are a must-have for beginners and professionals alike.

Power Consumption: 114mA @ +12V , 46mA @ -12V
10HP
35 mm deep

Notes: The Sumiko Pearl is a truly unique and precious find within the sea of entry-level phono cartridges. With decades of accolades to its name, the Pearl's smooth, natural sound reproduction breathes life into any recording with poise and transparency. Its diminutive price also belies its colossal ability to pull a complete sonic picture from each record it touches.

Rounding off the budget series with style and aplomb, the Pearl is an affordable audiophile marvel that's sure to delight.

Frequency Response:: 12Hz - 30kHz
Output Voltage: 4.0mV
Load Impedance: 47kO
Channel Seperation: 3dB @ 1kHz
Channel Balance: <0.5dB@ 1kHz
Stylus Type: Elliptical
Compliance: 12x10-6 cm/dyn
Tracking Force Range: 1.5 - 2.0g
Recommended Force: 2.0g
Cartridge Weight: 6.0g

Notes: Mix up to four stereo channels in just 4hp, or chain multiple modules together to add channels. Inputs are normalled for mono operation. Simple, compact and high quality at a reasonable price.

Supplier's Notes:
4xSt.Mixer is 4 HP quad stereo mixer.

Right inputs are normalled to Left inputs for easy mono operation

Several 4xSt.Mixers can be chained together or with other HN stereo modules via sockets on the back side

65 mA +12V
50 mA -12V
35 mm deep

Notes: The ultra-portable MPK Mini Play is based on the world's most popular midi controller - Akai Professional's MPK Mini-but now it comes packed with 128 sounds and its own built-in speaker. With 8 backlit MPC drum pads and a 4-way joystick for simple control, players have all they need to play their music anytime, anywhere. Four knobs (two banks capable of controlling eight different parameters) can be used to tweak sounds and edit multiple parameters in real-time, giving musicians even more performance possibilities. Powered by 3 "AA" batteries, the MPK Mini Play is built for hours of wireless fun.

Not just a mini keyboard, the MPK Mini Play can also connect to a computer via USB port for the same plug-and-play MIDI functionality as the classic MPK Mini controllers. If not disturbing others is a priority, players can use the mini-audio output jack to connect headphones to the MPK Mini Play. When you want a bigger sound, simply connect to external speakers using the same output jack. All-in-one, easy-to-use fun with "pro" features - that's the MPK Mini Play!

"We are extremely excited to introduce the MPK Mini Play," said Dan Gill, Product Manager for Akai Professional. "The MPK Mini was a huge hit with musicians and now having all those sounds on-board with a built-in speaker, along with its go-anywhere portability, Play opens up new musical possibilities that people are going to love."

KEY SPECS

Keys
25 velocity-sensitive

Pads
8 pressure and velocity sensitive
MPC-style Light-up Pads x 2 Banks

Knobs
4 assignable controller pots
1 x 360 Encoder for Display Navigation
1 Volume control

Computer Interface
USB-MIDI communications to Mac/PC

Octaves
10 with Octave Up and Down

Arpeggiator
Yes

Additional Controls
Pitchbend/Mod Joystick
Note Repeat Button
Full Level Button
Tap Tempo Button

Additional Inputs
1 14" (6.35mm) TS input for sustain pedal

Output
1 1/8" (3.5mm) headphone output
Built-in speaker

Power
USB bus powered
3 x AA batteries

Dimensions:
12.29" x 6.80" x 1.83" / 31.2 x 17.2 x 4.6 cm (WxDxH)
1.6 lbs

Review: 1975's Black Sabbath album, Sabotage, was written at a time when the band were caught up in an ongoing legal battle with their former manager. That is what gave the album its title and no doubt fuelled some of the more abrasive and angry tracks. The newly remastered reissue is now paired with a complete live show that was recorded during the band's 1975 tour. Of the 16 tracks, 13 have never before been released. As well as a special new booklet with further fan delights, two extra tracks feature on a bonus 7" with artwork that replicates a rare Japanese version of the single.

Notes: The new Akai Professional Fire represents the first of its kind, a dedicated hardware controller for the FL Studio Digital Audio Workstation (DAW) platform. Created in close partnership with Image-Line, Fire is a high-performance tool designed to enhance the workflow and music-creating experience for all FL Studio producers.

Fire features a dedicated browser function to navigate, audition and load your audio samples, recall project files and open plugins. Simply select browser and use the Select rotary encoder to preview and load content and devices within FL Studio - The graphical OLED display makes for easy browsing and controlling the various files, menus and parameters within your session a breeze.

Featuring plug-and-play integration, within seconds you'll be creating patterns and building tracks using Fire's 4 x 16 velocity-sensitive RGB pad matrix, designed for immediate interaction with FL Studio's celebrated step sequencer. Get hands-on with your production with everything you need to control FL Studio's channels and patterns. With direct hardware control over your session, you can easily mute and solo channels, expand the grid matrix, select new channels, navigate through patterns and much more without touching a mouse.

Get hands-on with your production with everything you need to control FL Studio's channels and patterns. With direct hardware control over your session, you can easily mute and solo channels, expand the grid matrix, select new channels, navigate through patterns and much more without touching a mouse.

From searing synth leads to lush pads, Fire's Note mode provides the ultimate platform to add melody and harmony to your production. Simply push the Note button and Fire's RGB pads switch-up to a MIDI keyboard giving you three octaves of note data, perfect for playing all of your instruments hosted in FL Studio.

Fire's pad matrix features an MPC-style 16-pad layout for seamless integration with FPC and SliceX. This is great for FL Studio producers who want a traditional beat-making experience or want to use their finger-drumming chops on the track.

Whether you're a studio producer refining an arrangement or live performer looking to take your sessions to the stage, Fire's Performance mode provides the ideal platform to remix and reimagine your tracks. Simply select Performance mode and launch MIDI clips and audio directly from Fire's RGB pad matrix for a truly inspiring live production experience.

Fire also provides immediate access to transport controls straight from the hardware. Record, Stop, Play, as well as a button to instantly switch between Pattern and Song mode are intuitively placed for mouse-free control of FL Studio. Plus, these all double up with secondary controls providing access to Loop Record, Countdown, Wait and Metronome.

Bringing a tactile, mouse-free mixing solution to the FL Studio environment, Fire includes 4 banks of 4 touch-capacitive knobs that enable the user to instantly see and adjust parameter values. Providing control over channel, mixer and user-assignable parameters, this enables a more intuitive and enjoyable workflow. From tweaking volume and pan within FL Studio's mixer to adjusting filter controls within the selected channel and recording automation, you'll spend less time clicking and more time executing.

Speed is power. Up to four Fire devices can be connected at once, enabling unprecedented hardware control over the FL Studio mixing and production workflow. Expand channels or make more in the sequencer accessible by selecting Multi-Device Mode from the OLED display. Instantly expand the 4 x16 matrix of one Fire unit to an 8 x 32 workflow.

Pads: (64) Velocity-Sensitive RGB Backlit Pads

Knobs:
4 x 360 degree Assignable Touch-Capacitive Knobs
1 x 360 Encoder for Display Navigation

Buttons: 20 x Dedicated function buttons; Red, Amber or Green backlit
Display: OLED Display
Connections: 1 USB Type-B Port

SYSTEM REQUIREMENTS
Windows:
Windows 7, 8, 10 or later
4GB of RAM or higher recommended
4GB free disk space
FL Studio 20.0.5 or later

Mac OS:
10.11 or later
4GB of RAM or higher recommended
4GB free disk space
FL Studio 20.0.5 or later

Notes: The Beautifier is a flexible OTA based filter, featuring a lowpass/bandpass switch and a selectable slope of 24db and 12dB. Two attenuated CV inputs for frequency cut-off and resonance. The filter self-oscillates at a given point and can be driven quite hard if you crank up the gain. All in all, a versatile analogue workhorse with a lot of character; from smooth and creamy to quite raw and screamy.

47 mA +12V
19 mA -12V
0 mA 5V
26 mm deep

Notes: High-resolution sound at a low price thanks to Tascam's US-HR range, provided here in 2-in, 2-out format with integrated MIDI in and out. Simple, no-fuss solution for hooking up to your DAW.

Supplier's Notes:
High-Resolution USB Audio/MIDI Interface (2 in, 2 out)

The US-2x2HR is a member of the Tascam US-HR series of high-resolution USB audio interfaces. It provides two mic/line/instrument switchable inputs and two balanced line outputs as well as MIDI I/O to your Windows or Mac computer or your iPhone or iPad. This interface is ideal for music creation and home recording with high demands on simple operation and studio-quality sound. The included loopback function and support for Open Broadcaster Software (OBS Studio), however, makes it also an excellent choice for podcast creation and live streaming.

The compact US-2x2HR incorporates a wealth of features, including high audio resolution up to 24-bit/192 kHz, ultra-low latency with a Windows buffer size starting at four samples, Ultra-HDDA mic preamplifiers with 48-volt phantom power for superior sound quality with ultra-low noise, a robust USB Type C connector, and a rich assortment of included software to start producing audio right away. This interface can also be used for mobile production or live streaming using your iPhone or iPad with the included Cubasis LE. Simply put, the US-2x2HR helps you create and distribute great-sounding audio wherever you go.

All US-HR models offer a unique dye-cast aluminum honeycomb structure on the side panels with a slight upward tilt. This design not only results in a sleek, eye-catching design, it also provides just the right amount of weight so the interface won't move when cables are connected or disconnected. Equally important, the upward tilt offers the ergonomic benefit of being angled in such a way as to make the interface easy to work with.

If you're a musician, producer or home-recordist who needs a solid, uncluttered, easy-to-use audio interface with superb sound quality, the Tascam US-2x2HR can be your reliable partner for many years.

The Ultra-HDDA (High-Definition Discrete Architecture) mic preamps used on the US-HR series feature a discrete construction. They have a higher number of components and are far away from mass-produced preamps. Their EIN (equivalent input noise) rating, which measures the absence of noise, is truly low for the US-2x2HR and US-4x4HR. Combined with a newly improved audio circuit and support for sampling rates up to 192 kHz, our in-house developed microphone preamplifier delivers enhanced audio performance with the most transparent and low-noise sound, reflected in a signal-to-noise ratio of 110 dB.

One issue when recording using a computer is latency, which is when audio signals are delayed through digital circuitry. Another is setting up the driver software that is used when connecting an audio interface to a computer. In order to eliminate these problems, our driver software introduces only very little latency and is easy to install. Furthermore, by making the external structure of these interfaces as simple as possible, the Tascam US-2x2HR and US-4x4HR allow users who are not expert users of audio equipment to operate them without concern.

The Settings Panel, which is installed on your computer, comes with a variety of functions. You can choose whether direct monitoring is done in mono or stereo and adjust the balance between input and computer signals. You can also switch the hardware inputs on and off individually and set the Windows buffer size according to your working environment.

For online broadcasting, Internet communication and other live streaming applications, the US-HR series interfaces offer a Loopback function which can merge input signals 1/2 with signals 1/2 coming from the computer (each can be set to mono or stereo) and send that mix to the broadcasting or other software on the computer. A software slider allows to adjust the final "broadcast" volume independently from the unit's line output level setting.

Instead of a computer, you can also use an iPad or iPhone together with the US-2x2HR/US-4x4HR to make music. Performance has been tested with not only the bundled digital audio workstation (Cubasis LE3), but also with other popular recording software - you can continue to use them even if you change DAW software. Since these units include MIDI inputs and outputs, you can connect MIDI keyboards, drum computers etc. to play sounds on the iPad or computer and thus expand your personal orchestra.

Maximum input level (Mic/Line/Inst): +10 dBu / +20 dBu / +10 dBV
Maximum input gain: 56 dB
Maximum output level: +20 dBu
Mic preamp equivalent input noise: 128 dBu
S/N ratio: 108 dB / 110 dB
Distortion (THD+N, mic to computer): 0,0013 %
Crosstalk: 95 dB
Power supply: USB / DC 5 V, 700 mA
Power consumption: 1.75 W
Overall dimensions (W x H x D): 186 mm x 65 mm x 160 mm
Weight: 1.1 kg

Notes: Sindikat is made to be placed in the heart of every modular setup: copy, invert, attenuate, scale, get different polarity versions simultaneously of two pair of mixes, mix CV as well as audio (up to 8 sources in total), mute or switch to add desired source to a bigger unity mix, scale two separate mixes with chosen gain.. All circuits can preserve their independent use and/or be combined!

Details & use:

The module consists of circuits designed to group the most useful operations for signal mingling in modular synth setups -but in the more fun manner!

It is designed in the way that the circuits can function independently -be patched to the other modules- or to be combined inside the module at the same time!

On the top of the module there is a buffered multiple (the bi-color led is indicating signal input and its polarity) : Next to the input there are two outputs giving the exact copy of the incoming signal. On the third output you'll get the 'attenuverted" version of that signal which is controllable by the dedicated attenuator/inverter potentiometer.

This signal can be further added (or muted) via its switch, internally to a unity gain mixer situated on the bottom of the module via its SUMM OUT.

This mixer has its own 3 inputs who will accept CVs as well as audio signals with an output gain of 1/3.

Its bi-color led will indicate the polarity of the incoming signals.

In the center of the module there is a CV Processor consisting of two mixers each mixing two signals- in the way that:
The first one takes two signals (A and B) and outputs simultaneously the positive version of their mix (AB+ OUT) and the negative version (AB- OUT).
Their gain is scaled by the potentiometer: going on 1x in the middle position to 2x fully turned. (After middle position with a stronger signal and due to higher gain it will start to saturate producing an distortion-like effect)
Further, via their switch, those mixes also can be added to a unity gain mix (SUMM OUT) and therefore creating a larger mix.
You'll do that by choosing which polarity output you want to send to a summing mix.
In the middle position of the switch the signal is "off" so you can use this to mute/un-mute the signal in the unity mix. Also, even if it is in "off" position this only breaks the internal link to a unity mix but you can still use their distinctive outputs to send your positive and negative mixes elsewhere in your system.

Goes the same for the second one: C and D inputs giving positive (CD+) output result and negative (CD-) simultaneously , all with gain select and the switch choice for summ positive or negative (or none) to a bigger unity mix.

You can also choose to use those two circuits as a simple attenuators for ex. by patching only one signal so you'll get an attenuator and polarizer at once!

The module can process CV and audio as well in every circuit.

Therefore, by summing eventually all the signals to a final "SUMM OUT" output you can create up to 8 sources -in the module- large mix!

Made for more fun with a modular!

This module fits perfectly well with Modulaire Maritime "Decca" switch-based manual control module.

As these modules are developed from practicing recording in "one take" (same for a live performing), combining them you get an extended control over CVs, gates and audio going on in the system, allowing to switch- stop/mute, change polarity, introduce/mix more gates, drums,.. on the fly.

8hp
25mm deep
Reverse voltage protected

Review: RECOMMENDED
How can heavy metal-ers not get excited about this one? While sporting a pretty serious price tag, this Super Deluxe edition of Black Sabbath's seminal fourth album is certainly one for the collectors, who will delight in the 11 additional studio recordings featured in the huge amount of bonus material here, which include snippets of studio dialogue, false starts and more rough around the edges nuances that bring the work to life.

As for the LP itself, it was something of a landmark moment in the band's journey - shifting the intensity and ferocity up at least three gears and then sticking a brick on the throttle to hold it in place. Perhaps Mojo's take on things puts it best; ""If booze and dope had helped fuel Sabbath's earlier albums, Vol. 4 is their cocaine ... Despite their spiraling addictions, musically Vol. 4 is another ambitious outing". Enough said.

Notes: Create a high-end recording studio anywhere with Revelator io44. Whether you want to connect a professional XLR microphone, a guitar, a DJ mixer, or your gaming headset, Revelator io44 has all the inputs and outputs you need to record... even a built-in mixer that lets you blend audio from multiple applications. Processing is available on every analog input, so you'll sound smooth and polished in your performances and recordings.

Guitarists, singers, DJs, and everyone else: you'll sound great, regardless of if you're tracking a record or performing live online.

25 years of studio-grade design experience is inside Revelator io44. Your XLR microphones will sound their best thanks to the PreSonus XMAX-L mic preamp with plenty of gain for your professional microphone to capture your voice smoothly, naturally, and distortion-free - and the onboard processing will make your voice stand out. Whether you're recording a vocal or chatting with your followers during a livestream, you'll be heard loud and clear.

Revelator io44 features an easy-to-use mixer that lets you blend audio from up to three different applications at once. Add backing tracks, Skype calls, and even gameplay quickly and easily without taxing your computer. An automatic output limiter prevents your stream from distorting. Whether you're on macOS or Windows, you can create custom mixes of your inputs and your applications and monitor it all at near-zero latency so you can stream and record simultaneously!

Features

Ultra-compact, mobile bus-powered USB-Cr compatible audio interface for recording, streaming, podcasting and more
96 kHz / 24-bit operation for pristine audio recording
1 digitally controlled, high-headroom, low noise XMAX-L mic preamp for professional results
1 Instrument input (via combo) for guitars and basses
1 TRS ?" Stereo Line input for DJ mixers and more
Stand-alone functionality lets you take your sound with you
?Balanced Main Left / Right with independent level control and mute
1 TRRS 1/4"""" stereo Headset connection (mic in, stereo out)
Integrated mixer lets you blend audio from up to three applications at once
Powerful onboard StudioLive processing lets you polish your sound (or completely transform it) with reverb, compression, EQ, and fantastic Voice FX - all without taxing your CPU
Professionally crafted Presets make you sound like a pro with a single click. You can also create your own custom presets to share, save, or produce on the go
Studio One Artist recording software and Studio Magic software bundle included

Notes: Multi-format turntable case

One size fits all! The new MULTI-FORMAT TURNTABLE CASE is a heavy-duty road case that was especially designed to fit the popular Technics SL-1200/1210 Turntable. It includes several foam pads to accommodate various new models such as a Pioneer PLX-1000, Mixars LTA and other models from Stanton, Vestax, Reloop, American Audio or Numark.

Fits

Audio Technica LP120-USB
Audio Technica LP1240-USB
American Audio Power Drive 2.2
DJ-Tech SL-1300MK6
Mixars STA
Numark TTX
Numark CDX
Pioneer DJ PLX-1000
Pioneer DJ PLX-500
Reloop RP-8000
Reloop RP-7000
Reloop RP-6000
Reloop RP-2000
Roland TT-99
Stanton ST-150
Technics 1200/1210 G
Technics 1200/1210 GR
Technics 1200/1210 MK2
Technicsc 1210 MK5
Technicsc 1210 MK7
Vestax PDX 3000

Basics

Heavy duty construction of 9 mm vinyl laminated plywood
Solid aluminum profiles and spring loaded latches
Secure stacking due to stackable ball corners
Full padded interior keeps equipment well-protected
Incl. adjustment foams to accommodate different turntable models

Specs

Outer measures: 52 x 43 x 22 cm
Inner measures: 45,5 x 36,5 x 9 cm
Weight: 8 kg

Notes: Top-quality studio headphones designed for long-term use. Soft alcantara cushions and CoolTech gel pads ensure comfort for long sessions. FitLok system ensures a good fit from one use to the next.

Supplier's Notes:
The RODE NTH-100 professional over-ear headphones offer exceptional sonic performance and superior comfort that inspires creativity. Featuring custom-matched drivers that deliver an incredibly accurate frequency response and ultra-low distortion, and a precision-engineered acoustic design optimised for exceptional detail and clarity, they are ideal for all forms of content creation, including music production, mixing and audio editing, podcasting, streaming and location recording. Luxurious Alcantarar cushions with these revolutionary CoolTech gel ensure maximum comfort, particularly for long-format content creation, and the fully adjustable headband with the innovative FitLok locking system provides the perfect fit every time. Your search for the perfect headphones is over.

Audio as it's Meant to Be Heard

The NTH-100s are meticulously crafted to deliver exceptional sonic performance for critical listening, from monitoring to mixing to mastering. Featuring custom-matched dynamic drivers that have been painstakingly tuned for an incredibly accurate frequency response and extremely low distortion, they are remarkably natural-sounding headphones. These qualities are further enhanced by the unique contoured earcup construction, which is optimised to ensure exceptional detail and clarity, and memory foam cushions for excellent passive noise isolation. They are precision-crafted to retain every detail and every nuance of sound they produce. In other words, audio as it's meant to be heard.

Incredible Accuracy, Exceptional Clarity

The NTH-100 drivers feature a custom voice coil with a four-layer ultra-high-tension aluminium alloy at its core, which is coupled to an ultra-stiff triple-layer Mylarr diaphragm. Combined with a rare-earth neodymium magnet and innovative phase plug inspired by the award-winning NTG5 microphone, these high-grade components ensure an accurate frequency and phase response across the whole audible spectrum for an incredibly articulate listening experience.

The Most Comfortable Headphones Ever.

When it comes to creating, comfort is everything, and the NTH-100s promise comfort like nothing else. The luxurious Alcantarar earcup and headband cushions offer a premium feel that enhances the sensory experience from the moment they are put on - supremely soft and highly breathable. Underneath the Alcantara is a layer of the revolutionary CoolTech™ gel, which absorbs and dissipates heat, actively cooling your head and ears to significantly reduce wearing fatigue. The unique ergonomic design of the earcups is also extremely comfortable, with bi-directional movement and memory foam providing a custom-fit feel for any head size or shape (even if you wear glasses), and the fully adjustable headband with the innovative FitLok™ locking system ensures they feel exactly the same every time you put them on.

Style in a Class of its Own

The perfect marriage of classic aesthetics and cutting-edge industrial design, the NTH-100s are instantly iconic. With clean lines and sleek, high-grade finishes, including the unique ergonomic earcup design and premium Alcantarar cushions, they look as good as they feel. Customise the NTH-100s to suit your style, with high-quality cables available in four vibrant colours: pink, green, blue and orange (matched to the channels of the RODECaster Pro and RODE Connect). Available in 1.2m (3?11?) and 2.4m (7?10?) variants.

Built For Creative Endurance

The NTH-100s are built to withstand the rigours of creating day in, day out. Every component is designed to endure, from the high-strength spring steel headband with its scratch-resistant coating to the highly durable Alcantarar cushions to the locking cable connectors. The cushions and cable are also user replaceable. This modular design ensures maximum longevity, even with vigorous daily use. Every pair is designed and made in RODE's precision facilities in Sydney, Australia using high-grade materials, so you can take on any creative endeavour knowing they'll be with you for the long-haul.

Acoustic and electrical specifications:

Transducer Size (millimetres):40
Operating Principle:Dynamic
Frequency Response: 5Hz - 35Khz
Impedance:32O
Sensitivity:110dBMax
SPL126dB
SPL Ear Coupling: Circumaural
Ambient Noise Attenuation: 20dB
A Connection Type: Dual TRRS Cable Attachments

Mechanical specifications:

Dimensions (millimetres):Length: 80
Width: 190
Height: 188

Weight (grams):350
Cable Length (millimetres): 2400

Included Accessories:

1 x 2.4m Headphone Cable (Black)
1 x 3.5mm to 14-inch Adaptor
1 x Storage Pouch
1 x COLORS ID Set

Notes: Memphis Vibrato was designed as the "small brother" of Crazy Tube Circuits' Killer V- this was born out of high demand for a true pitch shifting amp-like vibrato pedal, without the drive section.

It features all analogue LFO and true-to-the-original-amp 2-stage pitch shifting circuit powered from an internal voltage multiplier for high headroom and improved dynamic response. A clean period correct preamp with up to 20db boost takes you back to the late 50s / early 60s.

With the intensity and speed knobs you can add a subtle shimmer , or a pronounced 3D acoustic image and musical feel with ear- pleasing vibrato effect for instant classic Lonnie Mack / Robert Ward sounds!

ALL WET - DRY / WET toggle switch selects between 100% modulated signal or places the dry unmodulated signal in parallel with the modulated signal. The latter setup was found in some of the original amps through "stereo" inputs and yields whirling phaser / vibe sounds.

Notes: Queequeg 2

Sub Generator

Reawaken The Depths Below

KMA Machines released the original Queequeg in 2016. The pedal was our take on how simple and effective an analogue monophonic suboctave device could be.

Time doesn't stand still and so with Queequeg 2, KMA's aim was not only to update the device with a more striking appearance, but also add an additional sub-octave and the ability to switch and mix between them. With a small footprint, the updated pedal also has top mounted jacks and relay based soft switching for the modern age. Queequeg 2's super, easy-to-use and ultra-fast tracking sub-octaver works equally well on guitar, bass and synth, so these classic earth-shakingly awesome tones can find their way to any setup out there.

"Releasing the harpoon from his grasp, Queequeg gazed into the depths of the bleak waters that stretched down endlessly beneath him. Mindful to the aim of his adversary, the giant whale plunged further and further into the darkness of the abyss. This subaqueous dominion would forever be his rightful place. Queequeg 2- look deep down and believe."

Thickening up your tone slightly, blasting out faux bass-synth resonances or even filling in for a missing bass sound are just some of Queequeg 2's specialties. The pedal's super quick tracking benefits from KMA's custom all-analogue circuit design, giving you very organic and smooth suboctave tones.

Dead simple to operate, this tonally deep submergence vehicle offers three sub-octave settings to choose from. These allow you to turn your guitar into a filthy bass guitar with ground shaking lows, alternatively adding extra depth to basses and mono synths alike. The toggle switch lets you select between either the first octave (-I), the second (-II) or mix both together (-I/-II) which gives you a thunderously massive wall of sound, it even changes colour depending on the mode.

With its one knob MIX control, you are able to dial in just the right blend of the generated octaves and your clean signal. From completely clean on the left, to 100% suboctave action on the right and all with different sonic blends in between, you're sure to find your mighty vessel of tone.

Beware - don't let your lows be dragged under! Queequeg 2 draws the line right here and ends your hunt for an easy-to-set and great-sounding all-analogue and thundering sub-sonic beast!

Notes: Line module is designed to bring audio signals into and out of the OP-Z. Use external audio signals in your mix, send the audio from selected tracks out, switch easily between mono and stereo signals and even make FX loops with your favourite effects pedals.

Audio line in/out

Now you can easily connect anything with an audio output to your OP-Z: effects pedals, radios, synths, computers or even your phone. With audio out, you can separate and process individual tracks by routing them to the module output. The line module stereo output can even be used as two mono outputs.

Sync in/out

Tempo Sync other compatible gear to OP-Z so you're on the beat, all the time.

MIDI in/out

Line module allows you to use OP-Z to control other synths with MIDI input by using the OP-Z sequencer with your external equipment. With MIDI in, you can use an external MIDI controller, keyboard or computer to control your OP-Z.

Trig in/out

Tempo Sync and trigger sounds on modular synths, like the pocket operator modular, by using Trig out. Trig in allows any track on OP-Z to be triggered by an external signal, such as a drum machine, to single step and advance the sequence.

PO out

Tempo Sync your Pocket Operators and other compatible gear and have them follow the tempo of the OP-Z.

Notes: The new Preamp Model X comes loaded with a host of new features that make it easy to customize your digital preamp and cab setup. Featuring 3 global cab sim files, support for third-party impulse response files, and 14 preset slots, each with two different channel settings to customize, the Model X offers plenty of space to prepare for long gigs or the freedom to explore and save different tonal combinations.

Where the Preamp Model X excels compared to previous Mooer preamp pedals is in the user interface and digital editor software. The expanded footswitch layout of the X2 gives users two settings to choose from: one for preset scrolling and one for A/B channel switching. This allows users to quickly cycle through presets at just a tap of the foot. The editor software is free and can be downloaded from Mooer's website (www.mooeraudio.com) and allows users the comfort of a desktop interface when customizing and tweaking presets, loading third-party impulse response files, or updating the Model X2's firmware.

The Preamp Model X has been specifically designed to be compatible with files created using Mooer's MNRS sampling technology. Simply download these files from Mooer Studio (www.mooerstudio.com) and load them into your Model X2 using the editor software. The Model X2 is also compatible with Mooer's GIR/GNR cab sim files as well as other major third-party impulse response filetypes.

Specifications:

Input: 1*1/4" Monoaural jack (Impedance value: 1M ohms)

Output: 1*1/4" Monoaural jack (Impedance value: 510 ohms)

Num. of Preset Slot: 14

Num. of Factory Amp Model: 28 (Can be replaced by imported GNR file)

Num. of Factory Cab Sim: 3 (Global cab sim, can be replaced by imported GIR/IR file)

IR Spec: 44.1kHz/24bit/1024points

Power supply: 9V DV center negative (Please ensure the voltage value of power supply is not more than 9V, ensure the polarity is correct.)

Current Draw: 300mA

Weight: 0.334kg

Dimensions: 75mm(D)*115mm(W)*33mm(H)

Accessories: Owner's manual, USB TYPE-C to TYPE-A cable; DC 9V power supply, sticker.

Notes: Headband with three connection modes: W+ Link for wireless ultra-low latency and lossless audio, Bluetoothr 5.0, and cabled. Built-in microphone, includes USB-C charging cable.

Notes: M-Caster Live is the ultimate portable audio solution for streaming on mobile devices. Plugin your mic, sweeten your sound with ContourFX and StreamFX, then stream in minutes. With ContourFX, your voice will reach new heights with studio-quality sound-shaping and enhancements. And with StreamFX, you can add fun voice-changing effects.

M-Caster Live is also packed with features like dedicated headset and media player inputs, USB connectivity, and user-selectable RGB lighting that looks amazing in any streaming setup.

On the go? Just plug in an external USB battery and you have an incredible mobile streaming platform. From streaming to podcasting, get pristine audio just about anywhere with M-Caster Live. Your followers will thank you.

Included accessories

USB Cable
1/8" TRS / Aux Cable
1/8" TRRS Cable (For Smartphones)
Power Supply

Notes: M-Caster Live is the ultimate portable audio solution for streaming on mobile devices. Plugin your mic, sweeten your sound with ContourFX and StreamFX, then stream in minutes. With ContourFX, your voice will reach new heights with studio-quality sound-shaping and enhancements. And with StreamFX, you can add fun voice-changing effects.

M-Caster Live is also packed with features like dedicated headset and media player inputs, USB connectivity, and user-selectable RGB lighting that looks amazing in any streaming setup.

On the go? Just plug in an external USB battery and you have an incredible mobile streaming platform. From streaming to podcasting, get pristine audio just about anywhere with M-Caster Live. Your followers will thank you.

Included accessories

USB Cable
1/8" TRS / Aux Cable
1/8" TRRS Cable (For Smartphones)
Power Supply

Notes: Based on the iconic and critically acclaimed AT2020, the AT2020USB+ cardioid condenser microphone brings affordable, professional quality into the homes of podcasters, musicians and voiceover artists alike. Plug and Play compatible and engineered for crisp detail, the AT2020USB+ has been a firm favourite amongst creators for many years.

Equipped with a USB output, the AT2020 USB+ is designed for digitally capturing music or any acoustic audio source using your favorite recording software. The microphone offers the critically acclaimed, award winning sound of the AT2020, with studio quality articulation and intelligibility perfect for singer/songwriters, podcasters, voice over artists, field recorders, and home studio recorders.

The AT2020 USB+ features a built in headphone jack with volume control that allows you to directly monitor your microphone signal with no delay. It also offers mix control that blends microphone and pre recorded audio. The microphone's cardioid pickup pattern delivers excellent off axis rejection, while its A/D converter with a 16 bit, 44.1/48 KHz sampling rate ensures extremely articulate sound reproduction.

Audio Technica's state of the art design and manufacturing techniques ensure that the microphone complies with the company's renowned consistency and reliability standards.

Specifications

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20 - 20,000 Hz
Power Requirements: USB Power (5V DC)
Bit Depth: 16 bit
Sample Rate: 44.1/48 kHz
Volume Control: Mix control; Headphone volume control
Weight: 386g
Dimensions: 6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body diameter
Output Connector: USB-type
Headphone Output Power: 130 mW (at 1 kHz, 10% T.H.D., 32 ohm load)
Headphone Jack: 3.5 mm (1/8") TRS (stereo)
Accessories Included: Pivoting stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable

Notes: Module A-160-2V is an enhanced version of the standard clock divider A-160. The module is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses.

The Clock input will take any digital signal from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface. At the outputs, you have access to three sets of seven different sub-divided clock signals, from half the clock frequency down to 1/128. The low/high levels of the output signals are 0V and about +10V.

The A-160-2V also has a reset input. Whenever a reset signal is sensed, all outputs are set to certain levels which depend upon the selected mode.

HP : 4

Notes: The SVF is a 4hp 2 pole 12dB State Variable Filter Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

It provides Low Pass, Band Pass, and High Pass outs inspired by WASP and Thomas Henry filter topologies. The filter has 2 audio inputs, but channel 2 is jumper selectable between standard audio in or Ping-able operation. The 2019 revision also adds improved cutoff and resonance response and attenuversion through the ACV IN using the above pot. CV IN provides another unattenuated voltage input to modulate the frequency.

At the CV in, +10v will open the filter completely if the cutoff pot is CCW(counter clockwise). With the cutoff knob at noon the filter can be opened with +5v or closed with -5v. CV input at the ACV in is dependent on the CV attenuverter knob.

There are also several jumper selectable modes for max resonance, self oscillation or no oscillation based on the setting of the resonance pot. According to the jumper configuration, the filter is capable of clinical and clean, to juicy and drippy, to low pass gate sounding plonks, to screaming chaotic resonance. When set to self oscillation mode, the filter can produce a sine like wave with no input and a trapezoid like wave in the max resonance jumper setting. In max resonance mode, the filter output can exceed 10Vpp. On the newest version, there is a trimmer on the top pcb to set the lowest cutoff frequency.

The new black and white pcb/panel is reversible meaning, one side is classic (first picture) and the other side is soulless (second picture).

Notes: Clever FM module that does digital-style through-zero FM using analogue circuits. Use any signals from other modules as your carrier and modulator, then phase modulate or wavefold in the FM Aid.

Supplier's Notes:
FM AID is a module designed to perform through-zero linear Frequency Modulation (FM) in the analog modular world. Any arbitrary signals can be used as a Carrier and Modulator. The module copies FM in how it is done in digital implementation, but in a completely analog circuit free of digital aliasing artifacts. Digital or software FM oscillators are mainly based on a ramp waveform which is then shaped to other waveforms. This is also represented in the FM AID module: sawtooth signal is expected on the Carrier input to give the indicated sine, triangle, sawtooth and square waveforms on the respective outputs. However the user is not limited to only use sawtooth for the Carrier and any other signal can be plugged giving many complex waveforms at the outputs.

All known FM tricks from digital implementation are also applied - you can endlessly experiment with the Carrier/Modulator frequency ratios, Modulation index (FM knob), Modulator's amplitude shaping (CV knob), feedback FM (output is fed back to the Modulator's input) and many other.
Carrier input has normalled connection to the Modulator's input. This internal routing is disconnected each time a plug is inserted in the Modulator's input. That is a handy option which allows the module to be used with only one signal source - this single signal will act as Carrier and Modulator at the same time. There won't be any frequency differences between Carrier and Modulator in this case, but many interesting wave folding sounds will be available anyway.

Technically speaking FM AID uses Phase Modulation, not Frequency Modulation. The sonic difference is that the produces sound is brighter.

SPECIFICATIONS

Carrier input level: -5V ... + 5V (can also accept inputs ranging from -1V ... +1V] to [-12V ...+12V] / [-15V ...+15V] using onboard trimmer)

Modulator input level: preferably -5V ... + 5V

CV input level: preferably -5V ... + 5V

outputs level: -5V ... + 5V

outputs impedance: 1 kOhm

module depth: 3 cm or 1,5 inches

power consumption: +45 /-45 mA at +/-12 Vdc, +50 /-50 mA at +/-15 Vdc

Notes: All channels support headphones with 16 - 600 Ohm impendances.

Superb sound with low distortion and great low end.

Linkable channels (B to A and C to A).

All inputs with multiples, ie feeding different mixer channels.

Mono input is normalized to stereo.

Protected with relais, assuring soft starts and DC protection for your headphones (> +/- 10V input)

Width: 12 HP

Notes: Nice dual-module gate/envelope generator which can run off any audio signal. Feed it drums, synths, samples or a mic input and and generate CV modulation signals.

Supplier's Notes:
The Percussion Interface (PI) and PI Expander are a pair of Eurorack modules that generate gates and envelopes from acoustic drums, samplers, drum machines, and virtually any audio source.

Converting microphone, instrument, line and modular signals into CV and clock/gate signals, the PI and PI Expander are suited for synchronizing sequencers or other modules to the rhythm of an audio track or live percussion. The modules can simultaneously be used as a pre-amp for microphones or line-level signals, while generating inverted envelopes useful for side-chaining. The PI module contains all the core functionality and can be used without the Expander to conserve space. The Expander requires the main PI modules and adds three gain stage options, a modular-level audio output jack, a 1/4" (6.35mm) input jack, and envelope attenuation capabilities. The two modules are only sold together, they are not available separately.

Electrical and Mechanical Specifications:
Module size (PI):
4 HP Eurorack formal module
0.98" (25mm) maximum depth with power cable
10-pin Eurorack power header

Module size (PI EXP):
4 HP Eurorack formal module
0.98" (25mm) maximum depth with power cable
8-pin cable connects to PI

Power consumption:
with PI Expander
+12V: 104mA
-12V: 65mA
without PI Expander
+12V: 69mA
-12V: 56mA

Audio Inputs:
1/8" [3.5mm] on PI main module, and 1/4" [6.35mm] on PI Expander
100k input impedance, AC-coupled

Audio Outputs:
Voltage range: -10.4V to +10.8V, DC-coupled
1k output impedance
Gain Characteristics
Gain range: < -100dB to +54dB (500x)
Clip light turns blue when signal (post-gain) exceeds 2.5Vpp
Gate is triggered when signal (post-gain) exceeds 6.3Vpp
Clip light flashes red when signal clips on Audio Out jack (exceeds +10.8V)
Gate Out Jack
1k output impedance
+8V gate/trigger signal
6ms - 0.5s pulse width
+ Env Out jack (jack on PI main module)
1k output impedance
+9V peak (sustain), -60mV resting (off)
15ms attack time
70ms - 6s exponential decay time (1% of peak voltage)
- Env Out Jack (jack on PI main module)
1k output impedance
+9V resting (off), -150mV peak (sustain)
15ms attack time
70ms - 6s exponential decay time (1% of peak voltage)
Env. Out jack (attenuated jack on PI Expander)
1k to 26k variable output impedance
+9V maximum
-60mV minimum
Inv. Out jack (attenuated jack on PI Expander)
1k to 26k variable output impedance
+9V maximum
-150mV minimum
Included with the PI+EXP:
8-to-16 pin power cable
8-to-8 pin cable for connecting to the Expander
M3 Knurlie screws (4)

Notes: Junction requires a +12V / -12v power supply with a 2x5 pin ribbon cable (included). The red line of the ribbon cable must be aligned with the -12V marking next to the module's power header and on your case's power distribution board. Junction draws 23mA from the +12 rail and 20mA from the -12 rail. Please ensure you have
enough power available before installing.

About Junction

Junction is a compact, 4 channel attenuverter, cascading mixer and multiple designed to fine tune the control voltages in your rack to the perfect range for their destinations. Junction can be used as a source of fixed voltage, offset another voltage, or mix multiple voltages together to create complex and dynamic modulation.

Features

Each channel on Junction has a knob (1) that acts as a manual control for the attenuverter. Center position (12 o clock) is 0V. The first channel input (2) is normalized to +5V when no cable is plugged into it.

A buffered copy of the input signal of the first channel is present on all of the other inputs from from the first (2) to the last (8). This duplication is "cascading" as shown by the arrow graphics on the panel - if a cable is patched into any input, it "breaks" the cascading multiple - all unpatched inputs carry the signal present at the uppermost patched input (or +5V if no inputs are patched). For example, if a signal is patched into the second channel's input (4) the third (6) and fourth (8) channel inputs would carry a copy of the second channel's input instead of the first channel input.

Junction's channels are mixed on the outputs. The output mixer is also "cascading" - when a cable is patched into an output, it carries a mix of it's own output and all unpatched channel outputs above it. For example, if only the last channel output (9) is patched, this output will carry a mix of all of the outputs. Patching the first channel output (3) would remove it from this mix.

Even though Junction's inputs cascade and outputs mix, Junction's output will clip at the Eurorack power rail voltages of +12 and -12V. It is not possible to output a voltage outside of this range, regardless of the signals patched into Junction.

23mA +12 / 20mA -12 4 HP / 25mm
Deep Reverse Power Protection

Notes: Creatively inspiring business from Xaoc as usual. The Erfurt is a digital phase accumulator, digital oscillator, binary counter or clock/audio frequency divider. Versatile stuff.

Supplier's Notes:
Xaoc Devices Erfurt is a digital module that may be used as an 8-output clock and audio frequency divider, a bi-directional binary counter, or a component of the Leibniz binary system, i.e. a programmable digital oscillator.

Erfurt features an 8-bit register which holds its current state: an 8-bit number representing digital values from 0 to 255. The state is available at the front panel via eight binary (5V gate) outputs and reflected by the 8 status LEDs. There are three clock inputs: one incrementing the state at each impulse, one decrementing, and one resetting the state to zero. The state may also be changed manually with two buttons.

When operating alone, the state of Erfurt changes by 1 at each impulse from the clock inputs, so that it counts from 0 to 255 in a cycle (modulo 256). This yields the signal frequency divided by 2, 4, 8, etc. up to 128, available at individual bit outputs. Depending on which clock input is used, the clock patterns correspond to the so called mathematical or musical divisions of the rhythm.

With two different clocks patched to the inputs, the counter alternately increases and decreases its state, and ultimately it counts with a rate proportional to the frequency difference between the clocks. A third clock patched to the Reset input may be used to shorten the sequence thus making the cycle incomplete for even more rhythmic diversity.

When there is a Leibniz data source connected at the back (even as simple as Lipsk), the state increases or decreases in larger steps, depending on the data present at the Leibniz bus (eg. the value programmed by the Lipsk buttons). The counter overflows quicker, and produces more complex patterns.

The state of the counter may be used as a phase input to a digital wave table. Connected to other Leibniz modules, Erfurt may play various roles, eg. it may scan waveshapes in Jena, produce stepped voltages useful for making interesting glissandi with Drezno and any VCO, generate gate patterns animating the spectrum of Odessa harmonic banks, spawn pseudo-chaotic sequences when fed back to Lipsk, etc. Since Erfurt is based on CMOS logic (no CPU!), it can be clocked at very high frequencies (exceeding audio rate), therefore some selection switches are provided for clock pre-scaling.

Dimensions:
6 HP

Current Draw:
25 mA +12V
30 mA -12V
0 mA 5V

Review: Song Cycle Records has put together a collector's edition box set of the Solaris original soundtrack as realised by Russian composer Edward Artemiev, who was once a member of the legendary Experimental Studio of Electronic Music in Moscow. Andrey Tarkovsky's masterpiece film from 1972 is a cosmic epic with a soundtrack to match thanks to its many eerie synthesiser sounds and lo-fi, alien ambient atmospheres. The pair also worked on Mirror (1975) and Stalker (1979), but Solaris might be their best, as this compelling box set proves.

Notes: Expander module adds four more assignable CV inputs to Squid Salmple for advanced modulation and sample manipulation. A must for all Squid Salmple owners.

Supplier's Notes:
AXON-1 is a 4HP expander module for the SQUID SALMPLE that provides 4 additional freely assignable CV inputs.

The addition of AXON-1 brings Squid's total number of CV inputs to 7, greatly increasing the possibilities for vast modular sample manipulation.

Each modulation assignment includes digital attenuation and offset and behaves just like Squid's 3 built in CV inputs.

AXON-1 requires firmware 166 or later installed on the Squid Salmple to function!

Notes: Updated expander module for the Moskwa II sequencer. The Ostankino adds additional connectivity to the Moskwa II, allowing CV control of most parameters, plus extra outputs.

Supplier's Notes:
Ostankino II expander adds CV inputs for many Moskwa II functions, as well as a transpose input, clock out and individual gate/bit outputs for each step.

Notes: Plug-and-play mini mixer for portable DJ setups. About as simple as it gets, with two channels and three-band EQ in a compact format. Also available in plain black or plain silver.

Supplier's Notes:
Everyone thinks they are a DJ now, and the Pokket's revolutionary design gives everyone the chance to prove it! The set-up has been simplified to the extent it takes only 30 seconds to plug and play. Incredibly, there is no power supply required.

All of the inputs and outputs run off the standard 3.5mm jack, with two input sources and one output signal - your grandma could set it up. There's a smooth and responsive cross-fader and cue mix button so you can hear what's playing on the other channel though your headphones.

There are three EQ knobs to twist on each channel for the lows, mids and highs - perfect for pulling DJ-like concentration faces whilst your mates dance around your living room holding glow sticks.

It is light, fast to set-up, pocket-sized and looks as good as a sunrise in Ibiza. All you need are some massive headphones, some devices to provide the playlists (anything with a headphone output will work) and of course a banging sound system!

Music mixing is no longer just reserved for professional DJs. The Pokketmixer is the first mobile mini DJ mixer for everybody. It's easy to use and - since it needs no power supply - it's very versatile. The handy POKKETMIXER is easy to wire up and is ready in just 30 seconds. So anyone can easily and spontaneously be a DJ anywhere and at anytime.

MAIN FUNCTIONS:

Cross fading between two stereo audio signals (headphones signals), preview listen and EQ. With the crossfader you can fade from one song to the other. With the "Listen" switch the music can be heard from either device through your headphones. An equalizer can be switched on to change low, mid and high frequency of the left or right player.

FEATURES:

Set-up: Quick and Easy
Just plug in two players, connect the music system and the dance floor is ready.

Transport: Easy
The small, light unit weighs just 130 g; needs no power supply unit, no unnecessary multiple sockets or extra connection cables.

Use: extremely flexible
For example indoors or outdoors, just connect your Pokketmixer to a battery-operated boombox - at home, in a bar, in the park, at the beach, in the car, camper or on a boat.

Two in, one out - it couldn't be easier
Two signals go in, one signal comes out. With the standard 3.5 mm stereo plug, two players are docked (eg MP3 player, mobile phone, notebook, iPad, PC) and one system plays your music (eg, stereo system or active mobilespeaker).

Notes: VCA 3X is a simple yet great solution for synth users looking to add more VCAs to their setup in a single and compact module. This module features 3 VCAs with individual Signal and CV inputs and outputs.

Review: Where do you start with Carole King? From her reign as the most successful female songwriter in the UK album charts from 1962 to 2005, a staggering achievement for any foreigner, to the New York-born artist's claim of charting 118 Billboard Hot 100 tracks in the US at the time of writing, some of which were written during her tenure as a scribe at the Big Apple's Brill Building, often cited as the centre of the American pop industry during the latter half of the 20th Century.

Focusing on her own work, though, and by 2022 we've had no less than 25 full length releases from King, with Tapestry her second, and without question one of her finest hours. Songs like '(You Make Me Feel) Like a Natural Woman', and 'You've Got A Friend' remain timeless examples of what timeless pop music sounded like in decades when tracks regularly had a shelf-life well beyond a year or two.

Notes: DVCA

DVCA is a dual VCA based on the Mutable Instruments Veils. It features two separate voltage-controlled amplifiers, both with a gain and a response curve potentiometer, that is variable from linear to exponential. The outputs are normalized, so when no patch cable is present on output 1, output 2 will contain both signals, allowing the module to be used as a mixer. Several DVCAs can be daisy-chained for voltage-controlled mixer operation. It comes with jack lights that can be disabled via a jumper on the back.

These modules use tall bushing potentiometers to offer a more stable feel.

The module is fully assembled and tested. Eurorack power cable included.

Notes: Mighty oscillations, mini size.

An analog oscillator and LFO with pure waveforms and precise tracking in a compact package. Perfect as a utility modulation source but equally capable to be used as a primary sound source. Patch it up and let it rip!

Features
Four simultaneous pure waveforms: Sine, Triangle, Square and Sawtooth
Pitch input for 1V/Oct tracking and FM
SYNC input for Hard Sync. This input has a comparator so that you can use a variety of waveforms as triggers.
Switch to select VCO (audio) or LFO range of operation
Three position Octave switch to jump pitch up or down by two octaves
PITCH knob has three octave range in VCO mode (extended to seven with the octave switch) and seven octave range in LFO mode (extended to 11 with the octave switch).
Bicolor led indicates the state of the triangle core rate

Specs
Width 14HP
Depth 37.5mm
Power 19mA @ +12V
16mA @ -12V