Search dance music

Notes: The Collective is a brand new fuzz pedal designed by Hungry Robot. The Collective is an over-designed, complex fuzz pedal, a true desert island fuzz designed to please the most ardent fuzz connoisseur. The Collective covers a lot of ground with plenty of external controls as well as over a DOZEN internal parameters to narrow down that perfect fuzz tone. The Collective is a pedal that requires and encourages exploration. The Collective has three fuzz circuits in one box. On top of that there is a 2-band State Variable Filter and a chatotic feedback loop.

Starting at the top of the pedal, the "Conventional" knob is a traditional sounding fuzz. This is meant to balance out the more chaotic fuzz tones and provides a bread-and-butter sound when you need it. The "Low Spectrum" and "High Spectrum" knobs are part of an active State-Variable Filter, similar to the one found on The Lumen. The "Synthetic" knob is a logic based CMOS fuzz that can be described using the words, velcro-ey, synth-ey, gate-ey, and glitch-ey. The "Pristine" knob allows you to blend in your clean signal when you need a bit of pureness to balance out the crazier sounds. On the left is the "Overload" knob. This controls the amount of signal let back through an internal feedback loop. The output of the fuzz is fed back into the input causing self-oscillation and some gnarly textures. Underneath the knob is a dedicated momentary footswitch to activate the feedback loop or you can latch the feedback loop ON by flipping the toggle switch up. On the right is the "Submerge" knob. This is a monophonic sub-octave fuzz. Similar to the "Synthetic" fuzz, this is also CMOS-based, so similar gated, unstable tones. The "Submerge" also has a dedicated momentary footswitch to add in the sub-octave with its own toggle switch that can latch the sub-octave.

Controls

Conventional: Adjusts the volume of the Conventional Fuzz
Synthetic: Adjusts the volume of the Synthetic Fuzz
Pristine: Adjusts the volume of the clean signal.
Overload: Controls how much feedback is looped back into front end when Overload is active.
Latching Toggle Next to Overload: Latches the Overload effect ON when up. When down, the effect is bypassed.
Footswitch Below Overload: Momentary control of Overload effect. Does the opposite of what the Toggle Mode is set to.
Submerge: Amount of Submerge, monophonic sub-octave is sent to the output.
Latching Toggle to Submerge: Latches the Submerge effect ON when up. When down, the effect is bypassed.
Footswitch Below Submerge: Momentary control of Submerge effect. Does the opposite of what the Toggle Mode is set to.
Middle Footswitch: Master Bypass

Technical specifications:

Current Draw: 97 mA
Dimensions: 5.7" x 4.7"
Powering: 9V DC - Negative Center - 2.1mm Barrel

Notes: With our WURM Distortion pedal, KMA Machines brought you a highly regarded, yet unabashed sonic love letter to the legendary filthy 'doom and gloom' distortion sound of the original Boss HM2 MIJ pedal, taking it much further and pushing the envelope of how destructive it could be.

Adorned in an iconic black and orange colour-scheme reminiscent of its inspiration, WURM 2 takes the essential ingredients of KMA's now classic pedal, adding the ability to switch between EQ settings right on the front of the pedal. In addition, we squeezed it into a smaller and more pedal board friendly enclosure with top mounted jacks, improved the electronics and enhanced it with relay-based silent switching, all helping to make WURM 2 a more flexible metal-distortion pedal than ever before.

Main Features:

High-Gain Metal Distortion pedal
Modern take of the classic and now sought-after original Boss HM2 MIJ
Wide range of metal-distortion tones from chainsaw, to plain evil and gritty
Highly configurable 4-band active EQ
3 distinct types of EQ frequency controls to tailor your tone now accessible on the front
Compact enclosure with top-mounted jacks will fit into any setup
True Bypass, with silent relay-based soft switching

Specifications:

Product Type:
High-Gain Distortion with Active 4-Band EQ

Bypass Type:
True Bypass

Power Supply Requirements:
9 V DC - Centre (-) negative 2.1mm

Current Draw (max):
>60 mA

Product Dimensions / Weight:
H: 60 mm / 2.36 inch
W: 74 mm / 2.91 inch
D: 128 mm / 5.04 inch
Weight: 350 g / 12.35 ounces

Calling a pedal legendary or a cult classic is often stretching the truth, but when it comes to the Boss HM-2 MIJ it's absolutely on the money. From its beyond brutal and grinding distortion tones, bands like Dismember and Entombed birthed Swedish chainsaw metal. While WURM 2 absolutely nails that death-metal sound, its thick walls of gain and sustain is not all about that genre the pedal is also adept for so many other styles, from Shoegaze to Prog Rock. To give you an idea, famous players like David Gilmour, Prince, Johnny Marr, Belinda Butcher, Lee Ranaldo, Daron Malakian and more have all made their mark with this style of distortion.

The TERROR control dials in all the malice and the evil distortion sounds you are searching for. Crank it up and feel the tremors of the WURM 2 under your feet, tremors that would even frighten the wits out of a young Chuck Norris!

EQ Section
Dead simple to operate, this tonally deep submergence vehicle offers three sub-octave settings to choose from.
These allow you to turn your guitar into a filthy bass guitar with ground shaking lows, alternatively adding extra depth to basses and mono synths alike. The toggle switch lets you select between either the first octave (-I), the second (-II) or mix both together (-I/-II) which gives you a thunderously massive wall of sound, it even changes colour depending on the mode.

EQ Style
For the WURM pedal, we developed our own EQ stack and added an internal EQ STYLE switch to help you carve out additional tonal variations. In WURM 2, this is now on the front of the pedal to make it easier to access and for even more tonal options on-the-fly. Selecting HM-II mode will get you that classic 'chainsaw' High-Mids character.
However, in KMA mode the EQ is a little more tonally balanced, less peaky and a bit wider in response. If balanced and less peaky sounds too boring for you, select BOTH to fatten and double up the tone stacking, letting you ramp up the LOWS and the H-MIDS and rip that Swedish forest completely to shreds!
With all of this extra tone shaping, the pedal can sometimes begin to feedback at extreme settings. So, if this proves too much and to help tame that high-frequency content, we added a new internal control to smoothen things out. By flipping the dip-switch to activate the input filter, this will help to tame the high frequencies when absolutely everything is maxed out.

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, >60mA current draw)

Notes: Memphis Vibrato was designed as the "small brother" of Crazy Tube Circuits' Killer V- this was born out of high demand for a true pitch shifting amp-like vibrato pedal, without the drive section.

It features all analogue LFO and true-to-the-original-amp 2-stage pitch shifting circuit powered from an internal voltage multiplier for high headroom and improved dynamic response. A clean period correct preamp with up to 20db boost takes you back to the late 50s / early 60s.

With the intensity and speed knobs you can add a subtle shimmer , or a pronounced 3D acoustic image and musical feel with ear- pleasing vibrato effect for instant classic Lonnie Mack / Robert Ward sounds!

ALL WET - DRY / WET toggle switch selects between 100% modulated signal or places the dry unmodulated signal in parallel with the modulated signal. The latter setup was found in some of the original amps through "stereo" inputs and yields whirling phaser / vibe sounds.

Notes: Queequeg 2

Sub Generator

Reawaken The Depths Below

KMA Machines released the original Queequeg in 2016. The pedal was our take on how simple and effective an analogue monophonic suboctave device could be.

Time doesn't stand still and so with Queequeg 2, KMA's aim was not only to update the device with a more striking appearance, but also add an additional sub-octave and the ability to switch and mix between them. With a small footprint, the updated pedal also has top mounted jacks and relay based soft switching for the modern age. Queequeg 2's super, easy-to-use and ultra-fast tracking sub-octaver works equally well on guitar, bass and synth, so these classic earth-shakingly awesome tones can find their way to any setup out there.

"Releasing the harpoon from his grasp, Queequeg gazed into the depths of the bleak waters that stretched down endlessly beneath him. Mindful to the aim of his adversary, the giant whale plunged further and further into the darkness of the abyss. This subaqueous dominion would forever be his rightful place. Queequeg 2- look deep down and believe."

Thickening up your tone slightly, blasting out faux bass-synth resonances or even filling in for a missing bass sound are just some of Queequeg 2's specialties. The pedal's super quick tracking benefits from KMA's custom all-analogue circuit design, giving you very organic and smooth suboctave tones.

Dead simple to operate, this tonally deep submergence vehicle offers three sub-octave settings to choose from. These allow you to turn your guitar into a filthy bass guitar with ground shaking lows, alternatively adding extra depth to basses and mono synths alike. The toggle switch lets you select between either the first octave (-I), the second (-II) or mix both together (-I/-II) which gives you a thunderously massive wall of sound, it even changes colour depending on the mode.

With its one knob MIX control, you are able to dial in just the right blend of the generated octaves and your clean signal. From completely clean on the left, to 100% suboctave action on the right and all with different sonic blends in between, you're sure to find your mighty vessel of tone.

Beware - don't let your lows be dragged under! Queequeg 2 draws the line right here and ends your hunt for an easy-to-set and great-sounding all-analogue and thundering sub-sonic beast!

Notes: Based on the classic tones of bearded Texas legend Billy Gibbons (ZZ Top), El Hombre is the ideal overdrive for those feeling the blues or ready to rock all night. Capturing the nuances and touch sensitivity of an amplifier, El Hombre can go from mild to wild with the turn of the gain knob showing its versatility with each guitar plugged into it. From added harmonics to chewy sag El Hombre has it all. The El Hombre is simple in format but complex in its abilities. The tone section is highly effective allowing you to alter the drive style simply by adjusting the "Bite" control. When you bring the bite control up (Clockwise) it becomes more aggressive, turn it down (counterclockwise) making it smoother and more reminiscent of Dumble tones.

Notes: Fuzzly Bear 2 - Unleash the Beast, again

"Through the untamed wilderness of the forest strives a grizzly monster, its glistening eyes peeking through the undergrowth. Endowed with razor sharp claws and bone-crushing teeth, this beast will rip through any intruder that dares to trespass into its domain. A thundering, sizzling roar distortedly echoes through the woodland. It's here! It's time to face the Fuzzly Bear!"

In 2013, KMA Machines' first ever production pedal was inspired by an old, obscure and highly underrated fuzz box from the 1970s - the Jordan Bosstone. The original Bosstone wasn't even a pedal, it was a device you plugged directly into your guitar, which brought a host of problems. Hence, KMA Machines greatly refined the circuit for the original Fuzzly Bear, to get the essence of that old-school sound, but giving it some modern twists by sorting out the low end and adding a Bias control, to help players explore lots of new tonal capabilities of this long-forgotten box of dirty tricks.

With Fuzzly Bear 2, KMA Machines put this now classic re-imagined fuzz into a modern, more pedal board friendly enclosure with top mounted jacks, enhanced it with relay-based silent switching and improved electronics.

Back in the day, the main reason why the Jordan Boss Tone did not conquer the world of effects was actually due to its massive lack of bass. However, its core fuzz sounds could be truly heavenly with tones ranging from a purring overdrive, to downright vile and aggressive fuzz assaults. But when you awoke it, dug in and found 'that' tone, boy was it good and not at all harsh and gritty, like so many other fuzz designs at the time could be.

When designing and modifying the circuit, all the fuzzy goodness was kepy, but KMA Machines brought back the essential low end and gave some more tonal control, all to make this new take take fit more modern styles without compromising the core sound and simplicity.

The GAIN knob delivers a whole range of different fuzz shapes. Back it off to get a dirty chunky overdriven tone, turn it up to give the FUZZLY BEAR 2 a thick and thicker coat of fur. Set the gain fully clockwise and magic will happen! The pedal's smooth, warm and cosy decay turns into a starved and gated fuzz sound that almost gives a ghost octave, pseudo trumpety kinda vibe - perfect for classic tunes of yesteryear.

Fuzzly Bear 2 SKIN/MEAT control adjusts the bias of the circuit. Think of it as the claws of the beast. You can dial in a sharp drive tone that only brazes the skin, a thick and meaty wall of fuzzy fur that can rip right through the intruder's flesh and anything in between.

Don't confuse this pedal with a cute brown bear cub - this is the Fuzzly Bear 2 and it will maul your face off!

Notes: EarthQuaker Devices Special Cranker

An Overdrive you can trust

The Special Cranker is an all-discrete analogue distortion enhancement device designed to give your signal some extra grit and boost without drastically altering your tone and retaining all of the natural nuances and character of your amp. Think of it as sticking an extra preamp tube in your amplifier for more saturation. Single notes will blossom and bloom with rich harmonics and singing sustain with responsive, tube-like sag. Power chords will sound thicker and crunchier, a little more ragged around the edges. Complex chords will remain distinct and complex, as the Special Cranker is designed to preserve your tone's integrity without muddying up the low-end or smearing the midrange.

The Special Cranker picks up where the beloved Speaker Cranker left off. It has the same spongy, dynamic, and touch-sensitive character of the original but with more gain, double the output volume (now with a user-friendly Level control), an added Tone control to shape your signal, and a diode selector switch featuring the original asymmetrical Silicon diodes as well as a hot, new Germanium diode option.

The More control goes from nearly clean to a medium gain overdrive when at maximum. This control adjusts the bias of the transistor, so you may hear a little noise as you turn the control. Don't freak out; it's totally fine. The gain characteristics are dependent on which diodes are chosen. When the Germanium diodes are selected, the Special Cranker delivers a softer, more rounded response with tamed highs and lower output, while the Silicon diodes add a brighter, more modern edge and higher output. Both are exceptionally responsive to playing dynamics and have excellent clarity. The Tone control gives the user full command over treble frequencies, cutting the highs when counter-clockwise and adding a slight high-frequency boost when turned clockwise. The Level control adjusts the output from nothing to nearly double at maximum.

Tech Specs:

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 15 mA
Input Impedance: 5M P
Output Impedance: <25 kO

Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power:

This device should be powered a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

The Special Cranker can be safely operated from 9-18 volts.

Notes: Part of Dreadbox's impressive effects line-up, the Disorder is a rowdy fuzzbox crossed with a self-oscillating filter, serving up some pleasingly nasty tones. An envelope follower with CV output adds versatility.

Supplier's Notes:
The disturbance in physical or mental health or functions. It could be defined as a set of problems, which result in causing significant difficulty, distress, impairment and/or suffering in a person's daily life.

Dreadbox Disorder is a very aggressive fuzz pedal with a twist. It is equipped with a self-oscillating filter, that allows you to produce oscillating fuzz sounds.

Additionally it has a low pass and high pass filter, that makes it suitable for guitar and bass as well. Finally an envelope follower is also present, allowing you to create wah-wah sounds.

Specifications

Circuit: Analogue
Bypass: CMOS
Audio: Mono
Inputs / Outputs
IN/OUT: TS Unbalanced 6.4mm jack
Power Supply: 9VDC BOSS style center pin negative 2.1mm (Not included)
Dimensions (cm): 14 x 10 x 5.6
Current Draw: 50mA

Notes: Atlas Compressor

The Atlas Compressor offers a comprehensive collection of compression circuits that perfectly capture the tone and feel of the industry's most sought-after compressors. Straight out of the box, Atlas delivers six different styles of compression, ranging from classic stompbox compressors like the now-discontinued Diamond Optical Compressor to high-end rack units such as the snappy 1176 compressor and the smooth and gentle LA2A optical compressor. Atlas also features advanced dual-band compression, which provides an independent set of controls for both the high and low frequencies. Each compression engine has onboard controls for Threshold, Ratio, Attack, Release, Output, Tone, and Blend, allowing for fine-tuned control over the compact One Series hardware.

A History Lesson in Compression

The Atlas is packed with so many different types of compression that it could serve as a tour guide through the history of compressor equipment. First stop: classic stompbox squashers such as the legendary the Dan Armstrong Orange Squeezer and the excellent (but discontinued) Diamond Compressor. Next stop: universal and ubiquitous studio rack gear like the smooth and gentle LA2A optical compressor and the ultra-responsive 1176 FET compressor. Finally, we're taking you to all-out nerd territory with Peak, RMS, VCA, and Dual compression, and an onboard Expander circuit... the Atlas has it all and does it well.

Optical Rack

The Optical Rack compressor engine is based on the legendary LA2A studio opto compressors from the early 60s. Optical compression controls its output level with light. Increasing the incoming audio level in the original units caused an electro luminescent panel to shine brighter. A photo resistor monitors that light panel and decreased the audio output level, as the panel got brighter. The result is a very smooth and gentle attack that imparts a full-bodied and natural sound on guitar, bass, or vocal. This compressor sounds great with clean strummed or arpeggiated guitar lines as well as acoustic guitars.

Studio 76
The Studio 76 compressor is based on the 1176 studio rack compressors of the late 60s and early 70s. This solid state FET compressor is known for its full body and super-fast attack. All of the attack times in 1176 compressors clock in at less than a millisecond. Studio 76 is a great compressor for fast and aggressive country pickin' (think Johnny Hiland), slap bass, slide guitar and much more.

Cubic Zirconia

The Cubic Zirconia was inspired by opto compressors that use an LED in place of the LA2A's electro luminescent panel. This technology is usually what you find inside effects pedals. Using an LED as an optical compressor's light source creates faster attack and release times, which generate artifacts that tend to make the compression sound a bit dirtier. This is a great sound for playing tight and funky riffs on the guitar.

Studio snap

A very aggressive and modern sounding compressor. It's based on hard-knee, VCA feed forward type compressor. It uses two compressors in parallel to handle both RMS level controls ("Root Mean Square" compression means that the compressor will react according to the "average loudness") AND the peaks. The combination of these two compression approaches gives STUDIO SNAP its character.

Dual band

The Atlas has two independent compressors that can be routed in a number of different ways. They can run in Series Mode (one running into another). They can also run in Parallel Mode and be mixed together with a Crossfade control. The Dual Band compressor runs in Band Split Mode, which is a version of parallel routing where one compressor controls only the higher frequencies (everything above 333Hz) and the other controls the lower frequencies (everything below 333Hz). With the Dual Band Compressor the high frequencies release faster than the lower frequencies, so as you sustain a chord the low frequencies remain compressed while the second compressor releases the high frequencies. The result is a beautiful blooming effect that accentuates high harmonics. This is a great compressor for slow ringing chords or lead lines with long sustained notes.

Includes 9v DC power supply (300mA / Negative Tip)
Includes 1/8" to 1/4" cable for Neuro Mobile App connection.
Power Consumption - 165mA
USB port - Connects to Mac or Windows PC for firmware updates and the forthcoming in-depth effects editing software.
Brushed anodized aluminum housing.
Dimensions: L: 4.5 in./11.4cm x W: 2.75 in./7cm x H: 2 in./5.1cm (including knobs)

Notes: The polyphonic BASS9 Bass Machine transforms a guitar into nine different basses and requires no special pickups, MIDI or instrument modifications. It relies on the same technology powering all EHX 9 Series pedals, like the award winning MEL9r Tape Replay Machine, but features a new algorithm maximized for transposing one to two octaves down with superior dynamics and tracking.

A rotary switch allows the user to select the sound of their choice, as follows:
PRECISION: Pays homage to the iconic Fender P Bassr
LONGHORN: Emulates the Danelectror 6-string bass, ideal for baritone type tones
FRETLESS: Features both electric and standup fretless basses.
SYNTH: A tribute to the classic Taurusr Synthesizer
VIRTUAL: Lets the user adjust the bass's body density and neck length for a variety of bass sounds
BOWED: Classic bowed bass
SPLIT BASS: Makes it possible for the guitarist to play bass on the lower strings (all notes below F#3) and chords or melody with the higher strings.
3:03: A polyphonic salute to the sought after Roland TB-303r vintage bass synth
FLIP-FLOP: Inspired by EHX's Octave Multiplexer, it provides a '70s style logic driven sub-octave generator that tracks without glitches.

The pedal is equipped with independent Effect and Dry volume controls so guitarists can precisely tune their mix at the Effects output jack, plus an always-active Dry output jack that outputs the input signal at unity gain.

Controls 1 and 2 have been designed to adjust specific parameters for each of the nine programs. For example, in PRECISION, CTRL 1 controls the sub-octaves while CTRL 2 imitates the original instrument's tone control.

Note: All third party trademarks referenced by EHX remain the property of their respective owners. Unless specifically identified as such, EHX's use of third party trademarks does not indicate any relationship, sponsorship, or endorsement between it and the owners of these trademarks. Any references by EHX to third party trademarks is to identify the corresponding third party goods and/or services and shall be considered nominative fair use under the trademark law.

Pays homage to nine of the best bass sounds ever
Tracks impeccably and works on guitar without mods, special pickups or MIDI implementation
Independent Effect and Dry volume knobs let you precisely control your mix at the Effects output
Controls 1 and 2 have been designed to adjust specific parameters for each of the nine programs
Dry output jack outputs the input signal at unity gain
Compact, rugged, easy to use
Power adapter included

SPECIFICATIONS
Circuit
Digital
Bypass
Selectable Buffered Bypass
Audio
Mono
Power Supply
9.6VDC-200mA power adapter included
Dimensions (in)
4.75 x 4 x 2.25
Current Draw
100mA
Year Released
2019

Notes: The Mod 11 is packed with 11 different modulation effects that range from classic to exotic plus advanced functionality all in a compact pedal. It gives you access to powerful yet intuitive "hidden" parameters accessible through its Secondary Knob Mode which let you take even greater control over its effects.

The Mod 11's modulation effects are:

1. TREM: Tremolo modulates your signal's volume. Selectable modes allow your playing envelope to control modulation rate or depth.
2. HARM: Harmonic tremolo. The signal is split into high and low frequency bands and modulated between the two. Selectable modes allow your playing envelope to control modulation rate or depth.
3. VIBR: Vibrato modulates your instrument's pitch. Selectable modes allow your playing envelope to control modulation rate or depth.
4. UNI: pays homage to the classic Univiber. Includes "Chorus" and "Vibrato" modes plus added overdrive
5. CHORUS: Warbling, doubling, chorus effect like the EHX Small Clone. Extra modes include tri-chorus and bass chorus effects
6. ROTARY: Rotary speaker cabinet simulation. Extra functionality includes overdrive plus envelope control over rotation speed
7. FLANGE: Flanging with modes for both additive and subtractive flanger. Multiple LFO shapes, including envelope follower
8. TZF: Through Zero Flanger. A flanger effect that crosses through the "zero point" of the sweep where the modulated delayed signal meets back with the dry signal. Modes for both additive and subtractive flanger, plus barber-pole flanger
9. PHASE: Choose from 4, 6, or 8 stage phaser. Multiple LFO shapes including envelope follower
10. PITCH: Modulated pitch shifter. Select your main pitch shift and modulate around it. Extra functionality includes a dry blend and stepped pitch modes
11. FILT: Modulated filter effects like those on classic analogue synths. Low Pass, High Pass and Band Pass. Multiple LFO shapes available including a Q-Tron style envelope follower

The Mod 11's Momentary Mode lets you seamlessly switch in and out of effects mode for quick accents. It also features Tap Tempo controllable via the built-in footswitch or an external one. The Mod 11 is modulation with warp drive!
11 modulation types with multiple modes for each
Intuitive "hidden" parameters accessible through its Secondary Knob Mode
Tap Tempo via the built-in footswitch or an external one
Momentary Mode to switch effects in or out
Comes with a standard EHX EHX 9.6DC200mA power supply
Compact and rugged
Power adapter included

Specifications:
Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 150mA
Year Released: 2019

Notes: Sculpture is a mini compressor pedal with professional performance. Sustain and level controls adjust the compression and output, whilst blend gives the ability to add back in some of the unaffected signal to give a more natural attack. Hold down the on/off pedal to switch between soft clip and clean compression modes. Perfect for long sustain chords and clean lead tones.

Adjustable sustain and level
Blend control to feed in some natural attack
Selectable soft clip and clean modes
Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied)
Compatible power supply 173.290UK

Power supply: 9Vdc (centre-negative power adaptor required)
Current consumption: 100mA
Input impedance: 1M Ohm
Output impedance: 20 Ohm
Controls: Sustain. Blend, Level, On/Off/Mode switch
Dimensions9: 4 x 53 x 51mm
Weight: 174g

In the box
The box for this item contains :
Sculpture mini pedal

Notes: JTC Pro is an advanced drum & loop pedal with simplified controls, built into a dual switch stomp box pedal with 6 hours of recording capability and 256 loop track memories. Audio recording quality is 24-bit with a 44.1 kHz sample rate. A fully functional built-in drum machine section can be controlled on-the-fly by tapping tempo and punching in fills on demand using the 2 footswitches. A USB interface is included for firmware updates and can even load pre-recorded audio files to be used as backing tracks. Selectable playback modes and output options make this pedal an indispensable accompaniment tool for solo and duo performers.

Notes: Ideal for blues and crunchy rock sounds (or for that extra punch when soloing), the Nobels ODR-1 has been the first choice and secret weapon for many players and top studio guitarists for nearly 30 years. In fact, this top selling pedal has developed its own almost cult following since it was first designed and engineered in the eighties.

When the original circuit was developed, there seemed to be countless overdrives on the market that had what many people describe as a 'nasal' tone, but Nobels worked hard on creating a very 'open' sounding pedal that works with you and your amplifier. The result was the ODR-1, German engineering at its finest with stacks of resistors and capacitors forming very precise filters and signal shaping, giving you a pedal that responds to your dynamics and adds texture to your tone in a very natural, musical way - all while allowing the character of your guitar to be fully retained.

Step forward to 2020 with the latest model ODR-1BC.

With numerous requests from the pedal community and professional players worldwide, Nobels have added the option of an internal Bass Cut switch under the battery cover to help tame your low end if needed. In standard mode though, you still get the full frequency response of the original that is perfect for warming up single coils etc. In addition, the internal power circuitry has been increased to allow for 9-18 V capability to provide extra headroom, if your playing styles and tone goals require it. These new features haven't altered the fundamental tone and vibe, but have increased the versatility of the pedal massively for modern rigs.

With the drive control, the distortion can be easily adjusted from almost clean to maximum drive. The circuit also works very well with your guitar's volume control, so by backing off the volume you can clean up your tone. The tonal range is controlled by the Spectrum control tone pot with mid-click and fluorescent pointers on the Glow-in-the-Dark knobs. Turn the knob clockwise and it increases the bass and treble at the same time, while turning it counter clockwise has the opposite effect. The midrange stays untouched in either direction, to ensure a transparent yet warm tone wherever the Spectrum knob is placed.

Notes: The ODR-mini delivers creamy, natural overdrive - Everything from pushed clean amp tones to gain filled stacks! It has the same tones as its legendary brother - the ODR-1. You'll love the warm mid-gain tones for rock and blues, and the screaming hard rock sounds from the ODR-1 Mini. Plus the mini features true-bypass switching, the SPECTRUM pot with mid-click, fluorescent pointers on the "GitD" - knobs (Glow-in-the-Dark). Guaranteed to be a BIG part of your sound while a small part of your pedal board.

Electr. stab. power supply 9-18 Volt DC, with min. 100 mA, 2.1 mm plug, center negative, (optional)

Effect-Type: Overdrive
Analogue
Mono/Stereo: Mono In, Mono Out
Control: Drive, Tone, Level
Bypass Modus: True Bypass
9-18 Volt, center negative
Consumption 25 mA
Dimensions (BxLxH / mm): 42 x 93 x 50
Weight: 175 gr
Country of origin: China
Solid metal housing
Low current consumption
inkl. tape

Notes: Like the Iguana that's malleable to its environment, blending into its surroundings for harmonious balance or standing out with vibrant confidence, the Polychrome Flanger is a uniquely colourful tool for adding modulated textures to songs.

The Polychrome Flanger is a true bypass, all analogue Flanger pulling in familiar layout controls from the Julia and Lillian.
Dial in a wealth of colourful flange with the D-F-V blend knob and the shape and voice switches.
The Shape Switch lets you select from sine, triangle, or random LFO wave to modulate the delay line

The Voice Switch lets you select between two voices for the flanging effect.
In the down position, the flanger is more traditional and full frequency.
In the up position, you get a more complex and notched flange effect with less low end.

Like the other members of the Walrus Audio modulation family, the Polychrome has a blend knob. The D-F-V (Dry, Flange, Vibrato) knob lets you blend the dry and delayed signal from full dry at minimum (no effect), to traditional flange at noon to full pitch vibrato at maximum. Don't sleep on the vibrato sounds in the Polychrome.
Set the D-F-V knob to maximum, feedback to a minimum, and the voice switch up for some unique pitch vibrato.

Top mounted input, output, and power jacks as well as soft switch relay bypassing make the Polychrome fit well on your board and ensure smooth operation for years to come.

Specs
The Polychrome comes in a flat black enclosure with purple, yellow, coral, green and white ink, featuring original artwork by David Huttner.
Power supply not included.

Dimensions and power consumption:
0.25kg
6,6 x 12,2 x 5,6 cm (W x D x H)
50 mA

In the box:

Walrus Audio Polychrome
Manual
Sticker
Guitar pick
Pouch

Notes: While the Western world was preoccupied with smooth and soulful Fuzz Faces and Muffs, the Orient was bubbling up with gnarly mystical fuzzes, heavily imparted with earthshaking Godzilla DNA. This very distinct era in fuzz history gave us many treasures that have been rightfully crowned fuzz legends: the Univox Super Fuzz, Ibanez Standard Fuzz, Ace Tone Fuzz Master, Shin-Ei Companion and several others.

Just like its predecessor, the SolidGoldFX 76 MKII offers up a comprehensive guided tour to the best that the Standard Fuzz and its ilk has to offer without any of the drawbacks. On face value, the improved 76 MKII gives you a multi-voiced fuzz unit that offers loads of octave-up snarl and clang, at the same time as ruthlessly pummelling your amp with hair and fangs, while the top mounted jacks and new JFET Preamp stage all helps to make the pedal easily fit into any modern setup.

Armed with a JFET input and built around a specific set of Toshiba transistors, the 76 MKII's dual Texture and Colour tone controls allow you to precisely sculpt your fuzz while the octave switch allows you to dial back the octaves and overtones for a smoother finish.

All of this translates to a surprisingly varied and delicious fuzz feast, with everything from stabby robotic clangs, synthetic soaring leads, absolutely crushing doom chords as well as more warm and enveloping drives just a single stomp away.

Topped off with silent, soft touch true bypass switching and top jacks, the 76 MKII is everything you need if you're looking for a musical yet powerful fuzz capable of levelling Tokyo! Here's to the new Standard Fuzz.

Notes: Sunn O))) and EarthQuaker Devices are pleased to bring you the Life Pedal Volume III. The Life Pedal V3 circuit has been meticulously tweaked from the original to squeeze every last drop of heavy crushing tone available. The octave section has been fine tuned to make it more pronounced without losing the bottom end and we added a third footswitch, utilizing Flexi Switch Technology, for the octave to allow an additional method of quick and radical tone shaping. We are excited to have this back in permanent production, it is a true labour of love.

Life Pedal V3 is a distortion with a blendable analogue octave up and a booster combined in one compact package. The "Amplitude" side is faithfully modelled after the classic "White Face" distortion unit, using modern, reliable components to last a lifetime. The only modifications made to the original circuit are in the clipping section. The traditional circuit uses a single pair of silicon diodes for a tight, compressed crunch.

As with version 2, Life Pedal V3 offers two additional clipping options to better adapt to different rigs. The first position is no diodes to allow for full, grinding Op Amp assault at maximum volume. The second position utilizes two silicon diodes and one LED in an asymmetrical clipping configuration. This delivers a slightly compressed and smooth crunch, similar to a valve amplifier.

The last position is the stock double silicon diode configuration which provides that classic tone you know and love. The Octave in Life Pedal is an all-discrete, analogue full-wave rectifier base on a classic vintage design. Located at the input of the circuit, the Octave control slowly blends in the octave effects as you turn it clockwise. This feature can also be used via expression control allowing for wild, hands-free octave swells mid-riff or using the footswitch for immediate octave fuzz destruction.

Because this is an analogue octave effect, it is monophonic and works best playing single notes above the twelfth fret while using the neck pickup. Playing chords with the analogue octave will sound clanging and chaotic.

Using the bridge pickup and playing below the twelfth fret will produce a very subtle octave effect. Going full Octave transforms Life Pedal from a simple distortion device into a swelling, raging fuzz similar to the classic Super Fuzz!

The "Magnitude" section of Life Pedal is a simple all-discrete MOSFET booster designed to blast your preamp tubes and drive them wild. It is a 100% clean, no-nonsense, high impedance booster that adds very little colour to your tone. It does not add distortion on its own but has plenty of output to push your amp into saturation.

The signal path goes Octave>Distortion>Boost. The octave distortion and booster can be used independently with their own respective foot switches. The Petrine Cross is the octave distortion and the Christian Cross is the booster.

Notes: The #1 EQ pedal returns - better than ever

Empress Effects have brought back the most sought-after Parametric EQ pedal, with groundbreaking upgrades.

Everything people loved about the original ParaEq was kept, and more fidelity and control have been added.

More Control

Whether you're trying to cut through a mix or fix a feedback issue, you need precision! The ParaEq MKII offers the most control of any pedal EQ on the market.

More Sweetness

Effortlessly sweeten your tone with beautiful sounding, super smooth Baxandall filters for broad high and low frequency shelving adjustments on the Deluxe.

More Power

The ParaEq MKII pedals operates internally at 27V, providing clean headroom without unwanted clipping.

More Purity

This pedal is able to offer the most control without degradation to the tone due to minimal circuit topology00-the opposite of graphic EQs.

Why Choose Parametric EQ over Graphic EQ?
Parametric VS Graphic EQ Graph
Graphic equalizers provide a convenient visual sense of the EQ curve. However, there is a tradeoff in transparency and precision.

The graph here shows the ParaEq MKII Deluxe (cyan) and a 7-band graphic EQ pedal (magenta) both providing a +4dB boost at around 2 kHz. As can be seen, the ParaEq is much more precise in the changes it can make, whereas the graphic EQ affects nearly the entire frequency spectrum. Furthermore, at around 10kHz the ParaEq is providing unity gain, whereas the graphic EQ is attenuating the signal by nearly 6dB. This makes the ParaEq a more transparent circuit than the graphic EQ.

This combination of transparency and precision is why recording studio control rooms are dominated by parametric equalizers, and why they're a great choice for creative and corrective EQ on your pedalboard.

Which ParaEq Do You Need?

The original ParaEq has been loved and trusted by musicians on a variety of instruments for over a decade. Both the ParaEq MKII and the ParaEq MKII Deluxe feature a low-noise, transparent signal path that is extremely versatile.

With three fully parametric bands, you can simultaneously achieve broad tonal shaping and precise fine-tuning to sculpt your perfect sound.

The ParaEQ MKII Deluxe will appeal to players who:

Need high-pass and low-pass filters for precision work at the frequency extremes
Want the glorious sound of Bandaxall filters for sparkling high end or extra weight in the low end
Want to be prepared for any EQ situation

Specifications

Input Impedance: 1MO
Output Impedance: 100O
Frequency Response (-3dB): 22Hz - 25kHz
Total Harmonic Distortion: < 0.05%
Noise: > 107dB
Headroom: +30dBu
Input Voltage: 9VDC Centre-Negative
Required Current: 300mA
Power Input Connector: 2.1mm Barrel Connector
Height (Enclosure Only): 1.5"
Height (Including Controls): 2.5"
Length: 3.5"
Width: 4.5"
Weight: 1lb

Notes: The #1 EQ pedal returns - better than ever

Empress Effects brought back the most sought-after Parametric EQ pedal, with groundbreaking upgrades.

Everything people loved about the original ParaEq was kept, and more fidelity and control have been added.

More Control

Whether you're trying to cut through a mix or fix a feedback issue, you need precision! The ParaEq MKII offers the most control of any pedal EQ on the market.

More Sweetness

Effortlessly sweeten your tone with beautiful sounding, super smooth Baxandall filters for broad high and low frequency shelving adjustments on the Deluxe.

More Power

The ParaEq MKII pedals operates internally at 27V, providing clean headroom without unwanted clipping.

More Purity

This pedal is able to offer the most control without degradation to the tone due to minimal circuit topology00-the opposite of graphic EQs.

Why Choose Parametric EQ over Graphic EQ?
Parametric VS Graphic EQ Graph
Graphic equalizers provide a convenient visual sense of the EQ curve. However, there is a tradeoff in transparency and precision.

The graph here shows the ParaEq MKII Deluxe (cyan) and a 7-band graphic EQ pedal (magenta) both providing a +4dB boost at around 2 kHz. As can be seen, the ParaEq is much more precise in the changes it can make, whereas the graphic EQ affects nearly the entire frequency spectrum. Furthermore, at around 10kHz the ParaEq is providing unity gain, whereas the graphic EQ is attenuating the signal by nearly 6dB. This makes the ParaEq a more transparent circuit than the graphic EQ.

This combination of transparency and precision is why recording studio control rooms are dominated by parametric equalizers, and why they're a great choice for creative and corrective EQ on your pedalboard.

Which ParaEq Do You Need?

The original ParaEq has been loved and trusted by musicians on a variety of instruments for over a decade. Both the ParaEq MKII and the ParaEq MKII Deluxe feature a low-noise, transparent signal path that is extremely versatile.

With three fully parametric bands, you can simultaneously achieve broad tonal shaping and precise fine-tuning to sculpt your perfect sound.

The ParaEQ MKII Deluxe will appeal to players who:

Need high-pass and low-pass filters for precision work at the frequency extremes
Want the glorious sound of Bandaxall filters for sparkling high end or extra weight in the low end
Want to be prepared for any EQ situation

Specifications

Input Impedance: 1MO
Output Impedance: 100O
Frequency Response (-3dB): 22Hz - 25kHz
Total Harmonic Distortion: < 0.05%
Noise: > 107dB
Headroom: +30dBu
Input Voltage: 9VDC Centre-Negative
Required Current: 300mA
Power Input Connector: 2.1mm Barrel Connector
Height (Enclosure Only): 1.5"
Height (Including Controls): 2.5"
Length: 3.5"
Width: 4.5"
Weight: 1lb

Notes: Dusky drama

Gloamer is an all-analogue, polyphonic amplitude synthesizer that alters the attack and decay time of any sound source without sacrificing the fidelity of the original tone. Its attack function provides a pick-triggered volume swell: a cinematic "slow gear" effect that is smooth and controllable with variable timing from extremely fast to very slow. The volume swell cycle can be reset at any moment by muting, allowing players to craft bowed string-like lines and chords with ease. Gloamer also features a powerful optical compressor that can add subtle punch or extreme sustain, helping to maintain a smooth volume swell effect even with very long attack times. A Volume knob controls loudness at the peak of the attack cycle, while a master Blend control allows players to layer an uncompressed clean sound in with the volume swell effect. Additionally, when activated, the Decay function causes notes to fade out once the attack cycle is complete. When the decay cycle is completed, an auto-reset function causes the attack to begin again immediately, as long as there is audio input. This allows you to create a wide range of undulating, asymmetrical tremolos at slower settings as well as pulsating stutter effects when using faster attack and decay times.

Knob-by-knob

Volume: Sets the master output volume of the effect when engaged.
Compression: Determines the balance of clean and compressed signal.
Blend: Determines the balance of clean signal and effect.
Attack: Determines the duration of time it takes for a note to swell in from silent to full volume.
Decay: Determines the duration of time it takes for a note to fade out from full volume to silence.
Sensitivity: Determines how much input signal is needed to reset the attack and decay cycle.
Ready (LED): Signals when the pedal is armed and ready to begin the attack and/or decay cycle.

A hi-fi attack and decay master
Gloamer was designed to allow players to change the nature of their attack and decay while maintaining pristine, hi-fidelity audio. Easily swell blooming single note lines or full, lush chords and become the string section you've always wanted to hire but can't afford.

Model name: Gloamer
SKU: ATS
Function: Volume Swell with Compressor
Category 1: Modulation
Category 2: Compression

Bypass: True Bypass

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: 470K
Output impedance: 150 ohms

Body:

Length (in): 3.5
Width (in): 4.75
Height (in): 2.5
Weight (lbs): 1

Notes: Fuzz sculptor with an appetite

Star Eater is an all-analogue, dual footswitch super-jumbo Fuzz with a footswitchable booster and variable filter stage, allowing players to easily sculpt a massive array of inspiring, unique fuzz tones. On the fuzz side, newly-available, precision-matched transistor pairs are utilized to ensure that each and every unit is perfectly dialled in to "the sweet spot" that can be so elusive to find in vintage pedals. A rocker switch provides your choice of Germanium or Silicon colour. Downstream from the fuzz, a powerful booster stage drives the filter in the Star Eater. Scoop and Bump voicings for the filter can be selected via a rocker switch, drastically changing the frequency response of the Sweep control throughout its entire range. Built to last and designed to inspire, the Star Eater brings a unique approach and a new standard of performance to the world of boutique fuzz pedals. Runs on standard 9VDC.

Knob-by-knob

Hunger: Determines the amount of gain in the fuzz.
Volume: Determines the output level of the fuzz.
Sweep: Sets the frequency response of the filter. Note: The Sweep knob is only active when the Contour footswitch has been turned on.
Voice: Selects between Silicon (Si) and Germanium (Ge) diode clipping in the fuzz circuit.
Contour: Changes the shape of the tone.

Back to the future

Inspired by the chunky chassis feel of the late 70s and early 80s, Star Eater was designed to offer a fun, tactile user experience and make it easy for players to fine tune their own signature fuzz tone.

Model

Model name: Star Eater
SKU: FUZ
Function: Super-Jumbo Fuzz with Filter
Category 1: Distortion
Bypass: True Bypass

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: High
Output impedance: 1k
BodyLength (in): 3.5
Width (in): 4.75
Height (in): 2
Weight (lbs): 1

Notes: The Moon Op Amp Fuzz is a supermassive destroyer, spinning galaxies of gain. Tidal wave bass response gives you tones heavy as gravity itself.

The filter control offers an expanded range of usable tones and the filter switch gives you three distinct EQ phases: Scooped Mids 'classic', Flat EQ, or Full Range.

Feed the Moon Op Amp Fuzz with your favourite drive pedals and unlock worlds of complex tones.

The Moon's massive sound is achieved with a quad op amp delivering four stages of gain and fuzz. This circuit has its roots in Keeley's popular Dark Side pedal. In that design the tone and gain of the pedal were both tailored to be a vintage sounding fuzz for lead work. Keeley wanted to go 180 degrees in the other direction with this pedal's tone, the purpose being to achieve infinite sounding dreamy deep fuzz.

This is a punishingly heavy op amp fuzz designed to extend your guitar or bass frequencies as low as possible. This also means that your lead tones are as harmonically as rich as possible. So thick is the fuzz that your notes will rise and peak into brilliant feedback.

Keeley's most lunar sounding pedal: Moon Op Amp Fuzz.

Notes: A unique take on delay and looping, the Meris LVX is designed for ultimate flexibility when processing guitar, synth or line level sources. Stereo in/out, fully customisable signal path and supreme sound quality.

Supplier's Notes:
Meris LVX Modular Delay System

LVX is a Modular Delay System which breaks the paradigm of pre-set delay types in favor of freedom and flexibility.

A completely new UI and user experience has been designed from the ground up to make LVX immediately intuitive to navigate. The architecture of LVX allows ultimate creative freedom to design a custom delay.

The pedal features discrete processing elements and control signal modifiers that can be connected as desired for nearly infinite flexibility in crafting custom sounds. Make room for new memories.

Specs

Conversion: 24 bit A/D and D/A
DSP: 32 bit floating point
Sample Rate: 48000 Hz
Input Impedance: 1 Meg Ohm
SNR: 115 dB Typical
Frequency Response: 20Hz-20kHz
Max Input Level: +9 dBu (instrument level setting), +12.5 dBu: (line/synth level setting)
Power: 9V DC center-negative, 300mA, 2.1mm jack
Bypass: Selectable True Bypass (Relay) or Analog Buffered Bypass
Dimensions 7.25" wide, 4.5"" long, 2" tall. (Same depth and height as all other pedals.)
Weight: 24 ounces

Notes: Bags of character courtesy of 'tone wizard' Andy Timmons (Danger Danger). Dual delay lines work in tandem, creating stereo effects from vintage tape delay to infinite hold.

Supplier's Notes:
Andy Timmons' mysterious sounding "Halo" effect is a modulated dual echo sound that has long been kept a secret by the tone wizard himself. Andy spent decades combining and crafting the sounds you can now get from the HALO. Notes from the HALO dance rhythmically, almost creating a reverb diffusion. Those notes are held together with tape-style effects like modulation, saturation and compression. The results are stunning!

The pedal comes loaded with his signature delay tone and you can program your own sounds and save them as presets. Easily bounce between Side A and B on the fly, essentially giving you two delay pedals in one. In addition to Andy's signature "Halo" sound, there are numerous other rhythmic delays including: quarter note, dotted 8th, stereo rack mount analogue delay, and a vintage multi-head tape echo. Stunning stereo and pristine sound quality are further enhanced with controls for saturation, tone, and shelving filters that give you the ultimate delay pedal.

Think of HALO as two delay pedals that work in tandem, letting you switch between your main delay (side A) and an alternative (side B). With up to 1500 ms of available delay, set sides A and B for different delay times, then simply foot switch between the two. Keeley's Smart Stomp System allows you to press and hold either stomp switch to engage tap tempo mode. Press and hold the alternate stomp switch for infinite repeat/hold.

Each Preset bank gives you 2 delays settings for a total of 8 user-storable effects. Use the Rhythm control to select between different echoes like HALO, Analog, Tape, Quarter and Dotted Eighth. HALO's Saturate control adds tape compression texture to your tone. The Tone and High Pass Filter controls your overall delay shape and mix. The Rhythm Mode selector delivers 5 delay types, including Andy's unique "Halo" sound. Set the Time and Feedback controls low, and you can open up a world of ambient chorus and flanger effects.

Run the HALO in stereo for incredible true-stereo imaging or save your favourite combination of settings as a preset and the HALO becomes an incredibly compact multi-effect workstation!

Notes: Comprising eleven of Brian Wampler's favorite delays, the Metaverse is a full-featured, small-footprint stomp box that is fully programmable, preset capable, has stereo inputs and outputs, allows full MIDI control, and has an expression input that you can assign to ANY of the parameters. But it doesn't end there - for the first time ever, Wampler are offering a complete software version of the pedal via a set of 11 AU and VST3 plugins compatible with most popular DAWs - FREE to all customers that register their Metaverse Warranty online (plugin suite is $49.99 if purchased separately).

Just like the Terraform that came before it, the Metaverse is an advanced, feature-packed pedal that allows you to navigate its settings without endless menus on a tiny display. Use the intuitive user interface or a separate MIDI controller to effortlessly traverse Wampler's Metaverse of rich, expansive delay tones.

11 programs

The primary rotary controller selects between the eleven on-board delays, the five common parameter controls adjust the setting for each of the different algorithms. Each program has been hand picked by Brian Wampler and together form a comprehensive single pedal toolkit of awesome delays.

Total control

There are eight presets available via the controls - 128 total available via MIDI. The expression pedal can control ANY of the controls at once and these parameters can be saved into presets. Use Midi Global clock, Tap tempo, or the delay controller to set the time you desire.

Routing and flexibility

If you want true Stereo, you got it... You want basic mono, you got it. Hold down the left foot-switch to access alternate parameters for certain delays. Use a MIDI controller to access every parameter. Choose the delay time length using the tap tempo, send a MIDI global clock signal, or simply use the "Delay" knob.

Built for forever

Brian Wampler's attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the Metaverse. We're all tone-freaks, and we're always trying new things, but this pedal should finds its forever home on your pedalboard, so it's been built to last that long.

Notes: Designed in collaboration with Black Arts Toneworks, the Boneshaker is a dirty boost coupled with a powerful 3-band semi-parametric EQ. The Boneshaker can smack the front-end your amp into overdrive, or sculpt the tone of your fuzz to stand out in a mix. If your already dirty amp channel needs a little bit of a goose and you want full control over every frequency, the Boneshaker is just the ticket.

General Specifications
INPUT

1 x 14" instrument
OUTPUT

1 x 14" instrument
CHASSIS MATERIAL

All Metal
POWER SUPPLY

9V Alkaline Dry Battery or Optional Power Supply
Dimensions
HEIGHT

2.25" (5.71 cm)
WIDTH

2.63" (6.68 cm)
LENGTH

4.68" (11.88 cm)
WEIGHT

1.0 lbs. (0.453 kg.)

Notes: "We meat again!" Proudly presenting the DOD Meatbox (2015).

Answering the call of low frequency freaks everywhere, the DOD Meatbox (2015) is an updated take on the cult favorite Meatbox from the '90s. As a bass subharmonic synthesizer and low-end enhancer, the Meatbox can produce a range of sounds from a slight thickening to a full-on, low-end assault! Use the Meatbox on bass guitars, extended-range guitars, synths, even drum machines and push all the air out of any room. If you're looking for a new way to move your audience, look no further.

More than just a low frequency boost, the DOD Meatbox (2015) can also cut frequencies for tone sculpting as an interactive EQ and even produce distortion depending on where the output level is set.

The DOD Meatbox (2015) offers independent Octave, Output Level, Subharmonic and Low Frequency controls. True bypass allows your tone to remain pristine even when the DOD Meatbox is off. This is a big difference from the original, which would colour your bypassed tone.

The modern 9V DC power supply input makes the pedal more pedalboard friendly.

Notes: Delay and granular sampling combine to create unique ambience effects, creative reverbs and glitchy chaos. Hugely versatile pedal with five contrasting programs.

Supplier's Notes:
In the high woodlands of the north, undiscovered by most inhabitants, there ruled a clan of old, mystic Treefolk. On the first new moon of spring, these Treefolk could be heard grafting limbs to grow their young - splicing bits of branches from each generation to produce the next line of Treefolk. These new beings keep the lifeblood of all who came before in their new skin. These sounds are in part very old, but in part very new. They are referred to as... Fable.

Let your storybook adventure grows with the Fable Granular Soundscape Generator. The Fable gives you five all-new programs centered around sample and chop delay algorithms to create bizarrely beautiful networks of sampled and resampled sounds. The Fable uses a powerful dual DSP architecture to combine delay programs in series with granular sampling algorithms, each with its own analogue feedback path. Find unique soundscapes ranging from smooth, flowing ambience; to bizarre, organic reverberance; to chaotic, glitchy swarms.

So, what exactly is this granular effect and why is it a magical experience when combined with delay? Granular is a digital processing technique of micro-sampling, wherein short samples called grains are read from a delay buffer. In the Fable, players can adjust these grains by manipulating their sampling length, position, and buffer size from which they're read. They can be played at double or half speed for pitch shift and time stretching effects, play them in reverse, read from multiple positions, and more, in order to achieve different effects.

It's a powerful but complex technique and Walrus Audio created five streamlined programs in the Fable that explore different aspects of its sonic range.

Programs

I. Reverse Delay into Reverse Granular

Program 1 runs a reverse delay into a reverse granular algorithm, in which sampled grains are played backwards. Reversal and re-reversal build up in the feedback paths, creating a complex and organically shifting soundscape. Turn grain size down for long, smooth reversed transients, and grain size up for stuttering reverse glitch madness.

II. Forward Delay into Octave Up Granular

Program 2 runs a forward delay into an octave-up granular program, in which sampled grains are played at double speed. Swarms of double-speed grains build up in the feedback path for bright and airy cascades of sound.

III. Analogue Delay into Octave Down Granular

Program 3 runs a warm, dark analogue-style delay into an octave-down granular program, in which sampled grains are played back at half speed. Slowed down repeats combine with analogue-style processing to create deep, thunderous footfalls and thick, murky ambience.

IV. Multi-Tap Granular into Multi-Tap Granular (Grain-Verb)

Program 4 runs two multi-tap granular algorithms in series, in which multiple samples are played back from each granular buffer simultaneously. Multiple points of sampled sound build upon each other in the feedback paths to create glitchy clouds and unique organic reverberance. Time in this program controls time-stretching of both granular algorithms, changing both the length and tonal character of the granular effect.

V. Forward Delay into Randomized Pitch Granular

Program 5 runs a forward delay into a randomized pitch granular program, in which each grain is played back at a randomly selected speed and direction, varying between pitched up double speed, pitched down half speed, normal speed, plus forward and reversed playback from grain to grain. Pitch changes with each new grain, so play with the X knob in this program to control the rate of randomized pitch modulation.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


The Germanium Filter is Death By Audio's love letter to sticking a pencil in your speaker.

Start with a console-style drive circuit, add in a dash of obsolete germanium transistors and finish it off with a super intense DBA-style filter - BLAMO! You've got a sound heavy enough to crush on and sharp enough to slice a tomato.

The Filter control is extremely unconventional - it'll take you from bottomless, sub-woofered out lows to super searing and brittle highs, with a universe of tone in between. The Germanium Filter will help you find the sweet spot for your instrument in any situation - at a show, in the studio, or even stranded on the side of the highway after your tour van catches fire - hey, it happens!

The Gain knob starts with a dirty boost that then spans through saturated drive, spitting distortion, and a blistering fuzz tone. Get ready for your sound to be cranked up to infinity-and-a-half and captured on tape by the most incredible recording engineer you've ever heard - only there's no engineer and no studio. Just you, your guitar, your amp and the Germanium Filter.

Controls

Filter: Controls the frequency response of the pedal, featuring huge low end, scooped mids, and sharp, piercing highs.

Gain: Sweeps from mild overdrive to blasted-out fuzz. Very interactive with your guitar's volume control.

Volume (internal): Controls the overall output level of the pedal.

Specifications

Dimensions: 5" x 2.5" x 2.25" (including hardware).

Weight: 10.6 oz

Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).

Current Draw: 5 mA.

Notes: The Seabee is a multi-chorus pedal that delivers the finest analogue bucket brigade chorus tones, but like any Beetronics, it goes a few steps further. By digitally controlling the chorus delay time, the Bees have created Harmochorus - a never-before-heard pitch shifting modulation that can certainly inspire new genres.

Three Chorus modes provide the classic, lush chorus and vibe sounds we all love, with each mode offering the ability to control the effect in different ways. Vary between two different speeds and/or depths, go from zero to full depth intensity, or even increase the chorus delay time for a whole new spectrum of sounds.

Three Harmochorus modes give you a unique and inspiring new approach to the effect. The easiest way to explain it's that, when clean, it sounds like angel bees are accompanying you, and when paired with some buzz, it sounds like a swarm of killer bees producing the most dangerous pitch shifting modulation are after you! You can choose between two different pitches and speeds, a combination of twelve chords and twelve different arpeggio patterns, or simply choose between thousands of random patterns.

No matter which mode you choose, the Seabee will navigate you to inspiring and creative places.

Its simple layout with only three knobs hides a multitude of possibilities with alternate controls, three ramp shapes, tap tempo, a 4-way tone filter, feedback control, and a rate that ranges from very slow to ultra-fast waves, even reaching ring modulator ranges.

There are two stereo output options, 16 onboard presets, full MIDI control, expression in, external tap and 4 input level options so you can process guitar, bass, all kinds of active pickups or synthesizers and still keep the bucket brigade in its sweetest spot?

It's hard to believe that an analogue chorus can be so complete, versatile, unique and intense - all at the same time. But get ready, because Tone Fishing is about to beecome a thing.

Analogue sound path with the finest bucket brigade chorus tones.
3 Chorus modes / 3 Harmochorus modes
Never before heard pitch shifting chorus with arpeggios and random patterns.
Truly expressive ramping gives you musical control.
16 Onboard presets, Tap Tempo, MIDI, Expression and more.
Selectable input level (supports guitar, bass, active pickups, synthesizers and more)
Hand-assembled in Los Angeles, CA.

Packaging Dimensions: 15.2 x 13.7 x 7.6 cm
Weight: 0.49 kg

Notes: The BETA-V from SolidGoldFX is a Bass Preamp pedal that kicks! This latest incarnation of SGFX's top selling Beta Series is designed to capture the warmth and grit of favorite vintage tube amps. You know, that distinctive drive and tone that seems to be lacking from much of today's modern bass amplification.

Yes, we all know the convenience of a lightweight "sub 10 lbs" bass head that pumps out 500 watts and a neo cab that doesn't require a roadie crew or chiropractor is great, but there is something extremely satisfying in the way that big, old Ampeg-style tube setups compress, clip and round out your signal. However, with the BETA-V you can finally have the best of both worlds - bone-shaking mojo-packed dirt, all wrapped up in modern and easy to use convenience.

Solid Gold FX's classic Beta bass architecture has been reworked and expanded, delivering a wider range of tones. The low-pass filter now has 2 settings for bumped or scooped-mids as well as a centre bypass setting for a more transparent experience. Plus, the Drive control has been reworked for lower gain applications or hotter basses.

Most importantly, the BETA-V sports an active 2-band post gain EQ allowing you to boost or cut your highs and lows with a flat response in the centre. Dialling in anything from punchy overdriven Lemmy tones to the fattest, deepest soul shaking dub is only a few knob twists away. Complete with top-mounted jacks, soft touch true bypass switching and 9-18 V DC operations, the BETA-V is a true thump machine, ready to rock your world.

Notes: The Zoom G2 Four is a compact, easy-to-use multi-effects processor that offers a huge range of sounds with new amp modelling, multi-layer IR technology and over 100 effects:

Features

22 amp/cabinet models with newly developed multi-layer IR technology
79 guitar effects including boutique pedal modelling
Use of up to 7 effects simultaneously
250 preloaded patches with sounds that recreate guitar sounds from the 50s to today
300 patch memories in total
Additional effects/patches can be installed, edited and saved via the Handy Guitar Lab app for iOS and Android.
An external expression pedal can be used to control effects such as volume, pitch and wah in real time
Lightweight and compact design that fits in the pocket of your guitar case
80-second looper function
68 rhythm patterns that can be played in sync with the looper
Output EQ for quick adjustment of the overall sound to the playing environment
AUX IN jack for connecting a music player, etc.
Autosave function that automatically saves effect settings
Tuner function that supports open tuning and drop tuning
USB connection for Handy Guitar Lab, 2-in/2-out audio interface and firmware updates
Can be powered via USB bus (computer or power bank) or via the supplied AC adapter (AD-16)

Sounds without end

Using all-new amp modelling and innovative IR technologies, the Zoom G2 Four gives guitarists more sound variations to choose from than ever before. You can create amazing sounds right out of the box.

Comprehensive amp models

Zoom G2 Four takes amp modelling to the next level. Carefully recreated emulations of classic amps are combined with speaker simulations using our new multi-layer IR technology. As a result, guitarists benefit from great sounds and always have the feeling of being on the "big stage", regardless of the environment.

Multi-layer IR

Each amp model is based on Zoom's innovative Multi-Layer IRs, which capture the sound characteristics as well as the feel of classic amps and speaker cabinets. These IRs have been sampled at three volume levels through legendary cabinets and can be crossfaded and activated depending on the volume of your guitar.

Historic guitar sounds

Preloaded in the form of 250 presets, these patches were designed to document the sonic evolution of guitar sound. Each patch recreates the sound of a legendary song from the 1950s to the present day.

Brimming with effects

The internal patches include over 100 effects, recreating a wide range of traditional and boutique sounds, from classic spring reverbs to extreme distortion and modulation effects to wah-wah and more. Mix and match up to 7 effects to create your own patches.

Controls

Zoom's new cross-key navigation concept helps you control the pedal with just your feet and make adjustments on the fly. In addition, four endless knobs allow you to quickly adjust effect parameters as well as output settings.

Programming

The redesigned control surface makes it even easier to edit effect parameters, rearrange effect chains, and access the looper and tuner.

The perfect addition to your pedalboard
The G2 Four's compact design and diverse effects selection make it a powerful addition to any existing pedalboard.

Optimised for amps, monitor speakers and headphones
The G2 Four is designed to connect to guitar amps, studio monitors, PAs and headphones. After switching on, you set up the G2 Four perfectly for your setup by selecting between LINE and AMP.

Looper

Use the built-in 80-second looper for songwriting or enhance your performance with additional sound layers.

Play to the beat

Play along to any of the 68 beats on the built-in rhythm machine. This rhythm section is the perfect accompaniment when practising, whether it's metal, blues or any other genre.

Audio interface

Record at home or in the studio with your favourite effects and amp models by connecting the G2 Four to your computer via USB-C.

Guitar lab

Thanks to the ever-growing library of patches and effects, every guitarist can expand their sound selection via the Guitar Lab app (for iOS / Android).

Notes: Pulse is a miniature IR (impulse response) loader pedal, that can apply a specific tonal profile to the input signal. Speaker cabinets typically change the tone of a guitar or bass guitar in a musical way, which is often collected using a microphone for sending to a mixing console for recording or sound reinforcement. Connecting the signal to a mixer before the speaker usually produces a sterile and harsh sound, which is where the Pulse pedal comes in. This pedal can mimic the speaker cabinet and microphone, meaning that the guitar signal can be taken straight from the preamp section and injected into a channel on the mixer. Another use for IR loaders is to mimic the response of an acoustic guitar, making an electric guitar sound more like an acoustic or an electro-acoustic guitar sound more natural. Pulse has modes for guitar cab, bass cab or acoustic guitar with 8 selectable types of each, adjusted by Level and Space controls. A 3.5mm headphone output means that this pedal can also be used for silent practice and an inbuilt audio to USB interface means that it can be used as the front end for a PC or Mac computer recording setup. Pulse is an invaluable guitarists and bass players multi-tool for practice, live and recording duties.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Level, Space, 8-model selector and 3 IR modes switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Pulse IR loader pedal

Notes: Damp is the name given to this miniature digital reverb pedal to describe the immersive sound image provided by its 3 inbuilt reverb models. A choice of Spring, Plate or Hall reverberation types can be selected by the illuminated push button at the top of the pedal. Holding this button down during power-up selects between mono output or stereo output, which requires a stereo jack lead. Three rotary controls adjust Decay, Level and Tone settings as required. Pressing the footswitch activates or deactivates the effect, whilst holding this pedal enables a secondary effect - Shimmer in Plate mode or Freeze in Spring or Hall modes. The Damp pedal is versatile enough to cover a wide range of reverb styles with a minimal footprint on guitarists' pedalboards or for patching into an effects loop for other instruments or even vocals.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Decay, Level, Tone and 3 reverb modes switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Damp digital reverb pedal

Notes: A mini chorus effect pedal with 3 switchable modes for Chorus, Flanger and Pitch Modulation. Chorus thickens the sound by modulating a short delay effect, producing a swirling ethereal tone. The Flanger effect tightens this by shortening to a very fine delay and regenerating it for rotating and tubular jet sounds. Pitch Modulation provides a lighter chorus effect by slightly varying the pitch and mixing back with the dry signal. All 3 are selected by an illuminated push button above the controls. Holding this button down during power-up selects between mono output or stereo output, which requires a stereo jack lead. Controls include Speed, Width and Intensity to adjust each effect as required, Pressing the footswitch engages or disengages the effect. The smart tap tempo feature means that the pedal recognises pressing the footswitch twice or in a short space of time and responds to the timing as a tap tempo function to adjust the speed setting. An extremely versatile modulation effect to give space and motion to chords and picked passages alike.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Speed, Width, Intensity and Chorus/Flanger/Pitch Mod switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Mini Super Chorus/Flanger/Pitch pedal

Notes: Voodoo Vibe is a mini guitar effect pedal that is recreates the rotating speaker effects produced by the classic uni vibe pedals used by famous guitarists from the 60's to the present day. Controls for Speed, Intensity and Volume give a wide range of adjustment to home in on the perfect vibe effect. An illuminated mini push button above the rotary controls can switch between a classic psychedelic vibe effect or a more chorus-type effect. Holding this button down during power-up selects between mono output or stereo output, which requires a stereo jack lead. Pressing the footswitch engages or disengages the effect. The smart tap tempo feature means that the pedal recognises pressing the footswitch twice or in a short space of time and responds to the timing as a tap tempo function. Perfect for trippy arpeggios and ethereal chord work.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Speed, Intensity, Volume and Vibe/Chorus switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Voodoo Vibe pedal

Notes: Distortion and reverb meet in this unique pedal, sporting a joystick to tweak the sound and the option to flip the order of the two effects in the signal chain. Simple, quirky and effective.

Supplier's Notes:
Walrus Audio give you the two most quintessential effects that yield unruly amounts of power and influence to an instrumentalist: reverb and distortion. They have been harnessed and woven together for an eternity of ethereal power with The Melee: Wall of Noise. The Melee unapologetically uses a joystick to meld reverb and distortion into one massive blaze of sound. With the flip of the order switch, run the distortion into the reverb or reverb into distortion; signal chain is your call now. For the explorer, the Melee can run one of three different reverb programs Ambient, Octave, and Reverse.

In a less is more approach, Walrus Audio have intentionally decided on controls that are fun to use and will inspire a wealth of creative output. Use the joystick to control the amount of distortion by moving it up and down. Moving the joystick left and right will adjust your reverb mix. The tone and decay toggles have low, medium, and high settings. Modulation can be added to the wet signal by holding down the bypass switch and moving the decay toggle. The left position is no modulation, the middle is a slight modulation, and the right is a high modulation.

Algorithms

The Melee is equipped with three different reverb programs, which can be changed by simultaneously pressing the bypass and sustain stomp switches. Experiment with the order toggle switch to hear how differently these all react in front and after the distortion!

Ambient Reverb (Pink LED) - Huge reverb capable of massive trails and engulfing your chords into an angry wash of sound. Great for soaring melodic lines or shoegaze-driven chord progressions.
Octave Down Reverb (Yellow LED) - Similar to the Dark mode in the Slo, you'll find an eerie lower octave hovering in the reverb trail for a nice and dark atmospheric touch.
Reverse Reverb with Feedback (Blue LED) - Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload. Big, slow, and sad chords love to hang out here.

Momentary

Press and hold the sustain switch to ramp up the reverb trails. Release and the trails will ramp back down to where the decay switch is currently set. The sustain switch can also latch in all three programs. Press and release the Sustain switch to capture and sustain the current reverb decay for long pad-like sounds in your wet mix. Press again to release the latch, and the reverb trail will taper off based on the position of the decay knob.

Specs

The Melee comes coated in a glossy neon pink enclosure with white, yellow, and green inks with art by
David Huttner.
The die-cast enclosure's exact size is 3.62" x 4.79" x 3.14" (including joystick height).
Three bypass modes, DSP, DSP + True, True Bypass
Power requirements are 9VDC, centre negative (200mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Power supply not included.

Notes: The EHX 1440 Stereo Looper is a compact powerhouse that provides 1440 seconds of high-quality, uncompressed, stereo recording time plus the ability to store 20 different loops. It can even tempo sync to an external MIDI device and is packed with features you'll want. Unlimited overdubbing means you can lay down as many parts as you like while variable tempo playback plus Reverse and Octave speed effects really enhance creative control.

A 1 Shot function is also included, adjustable fadeout times and optional external footswitch control for selecting loops and Undo/Redo. The affordable 1440 Stereo Looper puts a ton of looping power on your pedalboard.

Notes: A Re-envisioning of the Filter Effect

Turning its predilection for parallel signals toward the world of filters and widening out to full stereo, Old Blood Noise Endeavors unveils its first digitally-controlled analogue pedal. Float boasts two independently controllable filters and copious capabilities for motion. Utilising the two filters in tandem can create stereo movement, linked reactive elements, and modulations that approach harmonic tremolo and phaser, as well as classic filter sounds.

Old Blood Noise were familiar with some aspects of the filter pedal. But the slow dual motions, the controls that go a little more left than you expect, the parallel undulations and surely other corners were all left unexplored.

So, turning their predilection for parallel signals toward the world of filters and widening out to full stereo, say hi to Float, the new Dual Moving Filter pedal! As OBNE's first digitally-controlled analogue pedal, Float boasts two independently controllable filters and copious capabilities for motion.
Utilising the two filters in tandem can create stereo movement, linked reactive elements and otherworldly psychedelic modulations. The two independent filters can be set to either low pass, band pass or high pass. The core of each filter is its Cutoff Frequency, which can stay still or move via either its 6 different LFO shapes or through its dynamic Envelope triggering.

The envelope sections can unleash quacky auto-wahs, shooting sonic laser beams or organically rising and falling filter landscapes - all triggered by your playing. While the LFOs lets Float become a mind-bending modulation device that can become everything from a phaser, a harmonic tremolo, a choppy or bubbly step-filter or an automated synth-like sweeper. However, skip the Modulation or envelope sections and the dual sliders come into play. This allows you to use Float as a dual-band EQ for subtle to extreme tone shaping, as a manual filter for on-the-fly futuristic filter sweeps or even for old-school wah-tones. Each filter also sports a resonance control, allowing you to unearth velvety smooth filters, vocal-like formants, screaming sonic squelches and anything in between.

All of this is pretty familiar, but also pretty sweet. Like an amalgamation of all things filtery and good. But where things start to get really different and really fun is when you mess with the Sync and Routing of the two filters. By flicking that tiny toggle labelled Sync to On, the two filters will move like tonal twins - locked in, precise and uniform. This lets you create robotic sequencer-like textures, trippy dual modulations or ultra-long, yet perfectly timed, filter manoeuvres. You can also set it to Off and have them completely free-rolling for organically weaving textures or full-on filter cacophonies. In addition, the filters can be run in either parallel mono, series mono or stereo for all kinds of refined dual movements, cascading filter chaos or lush and dreamy stereo sweeps.

To round off this veritable filter playground, we've added an expression in port, that lets you take hands-free control over either the cut-off frequency or LFO Rate, allowing you to keep your fluttery filter modulation as expressive as the music you play.

So, that's Float... or that's the essence of Float. You'll unlock sounds from this thing that you never knew it was capable of, because it does a lot of good, weird, wild, tame, ugly and absolutely stunning stereo stuff. Float on, friends!

Notes: Another banger from Dreadbox's excellent effects series. Stereo echo effects based around multiple hybrid delay stages, giving bags of character for reverb, modulation effects and classic delays.

Supplier's Notes:
Dreadbox Raindrops is a Hybrid Delay/Pitch Shifter/Reverb pedal that takes the concept of short echoes to a different level.

It is equipped with multiple delay stages and different chips and you can choose between 3 different play modes, where in each one you can have a whole new experience and alternative soundscapes. You can achieve from simple short echoes, to long, dirty and lo-fi delays and from simple pitch shifting bursts to extensively lasting reverbs.

Specifications

Circuit: Analogue Dry signal / Hybrid Delay / Digital Reverb
Bypass: Buffered OpAmp
Audio: True Stereo IN/OUT
Inputs / Outputs: TS Unbalanced 6.4mm jack
Power Supply: 9VDC BOSS style center pin negative 2.1mm (NOT INCLUDED)
Dimensions (cm): 14 x 10 x 5.6
Current Draw: 220mA

Notes: Space Bender

Chorus Modulator

LFO in the UFO

The Space Bender chorus modulator replicates and warps your signal into beautiful and organic transmissions from a dimension somewhere beyond linear time.

Under the hood lies an array of dynamically modulated delay lines allowing you to craft subtle vintage sci-fi sounds, bending sonic bedlam, and pulsing atmospheres. Never again will you say this chorus pedal just isn't intense enough! These in combination with the rocker switch settings let you move smoothly through a wide range of effect types allowing for new ways of thinking and experimenting with modulated delay, chorus, and flanger.

Stretch and pull your sound waves to craft glassy bell resonances, massive reverse dive bombs, and seasick demon drones with a simple (but deep) interface. The spectrum of living, breathing sound manipulations stowed within the Space Bender serves as an interstellar gateway for the next wave of musicians to create a universe of haunting and unexplored soundscapes.

See you on the other side!

Specifications

Dimensions: 5" x 2.63" x 2.45" (including hardware)
Weight: 9.3 oz.
Power: 9V DC (runs on standard 2.1mm negative center 9V DC adapter).
Current Draw: 65 mA.

Notes: Tape Echo is an echo and delay processor with 7 different types of simulation to recreate the sound of vintage echo units. In addition to classic tape echo simulation, the NDD-7 has a separate spring reverb effect, sound-on-sound (SOS) for operation as a 40 second looper, and up to 1600ms of delay. For authenticity, the NDD-7 also has Wow & Flutter settings and Saturation adds natural compression and degradation, which can even drive into self-oscillation, like a true tape echo. Two foot switches operate as effect on/off and tap tempo and they double as looper and display controls. Above the foot switches are Time, Repeat, Level and Reverb controls and 2-band EQ governs the tone of repeats. USB connectivity and MIDI compatibility give further possibilities for deep control and integration with DAW and project studio setups. A full vintage echo collection in a single compact pedal for those seeking the genuine retro echo sound.

Specifications:

Power supply: 9Vdc, 300mA (min) pin-negative (not included)
Controls: Time, Repeat, Level, Reverb, Bass, Treble, Select
Current consumption: <150mA
Sampling Frequency: 48kHz
Sampling format: 32-bit
Frequency response: 20Hz - 20kHz (-1dB)
Input impedance: 5M Ohms
Input level: 1.5V max
Output impedance: 100 Ohms
Output level: 1.5V max
Latency: 1ms
Dynamic range: 103dBu / 105dBu (A-weighted)
THD: +N0.0038% (1Vrms, 1kHz) / 0.01% (1Vrms, 1kHz)
Dimensions: 115 x 105 x 58mm

Notes: The J Mascis Ram's Head Big Muff Pi fuzz pedal pays homage to the sonic centre of the alt-rock legend's iconic tone of equal parts thickness and clarity in a special edition white and violet finish.

"That's my sound. The Muff is always on," J says. "All distorted sounds begin with the Muff. That's what I grew up playing so it's kind of amazing to have my own signature one."

Based on the highly coveted 1973 Electro-Harmonix V2 Violet Ram's Head Big Muff, J's signature Big Muff produces the indulgent fuzz and exceptional sustain used as his sonic centre for decades.

The fuzz is sonically more articulate than other Big Muffs with excellent string separation and dynamics, which make it one of the most versatile Big Muffs. The pedal's response feels smooth and aggressive making your leads scream and chords thunder.

Feel the fuzz of a guitar giant: the J Mascis Ram's Head Big Muff Pi fuzz pedal from Electro-Harmonix.

Authentic V2 Violet Ram's Head Big Muff in a nano-sized chassis
Special-edition artist graphics
True bypass
9V battery included

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 2mA
Year Released: 2022

Notes: TR-S

Power Tube Reactor

The feel and response of a tube amp, in a pedal. Meet a build-it-yourself pedal that delivers the warmth and response of a tube amp. The Nu:Tekt TR-S uses a Nutube to deliver previously unachievable compression thanks to exclusive patent-pending technology - meaning you get the feel of a tube amp even when recording or playing through a transistor amp.


What is a Nutube?
Developed by Korg; a Nutube - similar to a conventional vacuum tube/valve - has an anode grid filament structure, and operates exactly as a triode vacuum tube. It provides the same rich overtones and response that are distinctive of conventional vacuum tubes.

Overview

Meet a build-it-yourself pedal that delivers the warmth and response of a tube amp. The Nu:Tekt TR-S uses a Nutube to deliver previously unachievable compression thanks to exclusive patent-pending technology - meaning you get the feel of a tube amp even when recording or playing through a transistor amp.
Alongside amazing tone, one of the hallmarks of the Nu:Tekt series is that they're assembled by you! The TR-S kit doesn't require soldering, and the necessary tools are included - in fact, it's the easiest and fastest unit to assemble in the entire Nu:Tekt series!
Recreate the tube experience

The TR-S features an exclusive patent-pending circuit design, for compression that mimics the sag of a vacuum tube power amp - only possible with Nutube. Achieve this sought-after sound in any setting, even when playing through a transistor amp or recording into a DAW. The TR-S features four knobs on the panel, as well as three trimmer knobs hidden inside the top cover, allowing for even greater control over your sound. Go beyond the guitar and experience what the TR-S can do when you connect other instruments as well!

Easy assembly

Assemble the Nutube-driven TR-S with ease, just like a model kit - no soldering required. All necessary tools are included, along with a circuit diagram in the owner's manual. Perfect for those who love building their own effect units with top-notch performance and sound.

Specifications

Vacuum tube Nutube.6P1.
Inputs Mono 14" Jack
Outputs Mono 14" Jack
Power 9v battery, or DC9V AC adapter (both sold separately)
Approx. 5 hours battery life
Consumption 85mA
Dimensions 122 x 96 x 55mm
Weight 340g (without battery)

Notes: The late 1970s rarity Electro-Harmonix Slap-Back Echo pedal is reissued with modern updates and a Pico footprint!

The 50s era gave birth to an iconic sound in which a single, short delay was utilized to add depth and rhythmic effect on countless recordings. The newly reissued all-analogue design of the EHX Slap-Back Echo delivers this beloved classic sound and more in a Pico-sized pedalboard-friendly package. With three delay time settings and up to +20dB of boost, the Slap-Back Echo can achieve subtle doubling effects to intense bathroom reflections all with the distinct flavour of bucket-brigade (BBD) circuitry.

Housed in EHX's Pico-sized chassis, the Slap-Back Echo features Gain and Blend knobs as well as a Time switch. The Gain knob controls the input signal before the echo circuit and also adjusts the overall volume at the output with a boost of up to +20dB. The Blend knob mixes the dry signal and the echo signal from 100% dry to 100% echo. The Time switch selects between three different delay times: 45ms, 65ms, and 100ms.

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 15mA
Year Released: 2023

Notes: Huge chorus-flanger. Take your music to infinity. The fully analogue Dreadbox Komorebi Chorus-Flanger Pedal gives you a huge array of sound design possibilities. This powerful pedal can add some serious impact to your sound.

It doesn't matter if you're playing bass, guitar, synths, or even if you want to hook it up to your modular Eurorack system. The Komorebi is ready to go. Sprinkling its beautiful effects over anything it touches.

From a slight pinch of flange to add some movement to your bass lines, or a lengthy chorus effect to treat your pads and chords to a final touch of space-age wideness. It's a guitar pedal but not as you know. Komorebi works with everything.

Current draw: 100mA

Notes: Seriously potent effects power as usual from EarthQuaker. Octave reverb with clever modulation options and eight different modes, from sub-octave generation to pitch-bent harmonies.

Supplier's Notes:
Unrelenting, radicalized reverb for the modern world; an array of haunting, unearthly delights and ethereal sonic sorcery designed to take you on a deep journey through both time and space. This is your new destiny should you choose to accept it. Welcome to your new Astral Destiny.

The Astral Destiny is a compact and powerful modulated octave reverb pedal that features 8 reverb modes with 8 editable presets, assignable expression control, tails for natural reverb decay when the effect is bypassed and a super cool stretch feature that doubles the length of the reverb while adding an adjustable pitch bending effect.

Astral Destiny features a completely analog dry signal path, totally digital delay path, buffered bypass with and two different bypass states- Tails or Full Bypass. Tails Mode, which the is the pedal's stock setting, allows the reverb to naturally decay after the effect is bypassed, slowly letting you drift back from your ethereal dream state into the waking world. Full Bypass, on the other hand, will cut the reverb effect completely when the effect is bypassed and instantly throw you back into cold clutches of reality.

Let your fate spin out of control by pressing the Stretch footswitch doubles the length of the reverb effect while adding a temporary change in pitch. While a short tap will immediately change the pitch, holding the Stretch footswitch depressed gives you a temporary pitch bending effect with the speed of the of the pitch bending effect created by holding the Stretch footswitch easily adjusted by turning the Length knob.

While the Astral Destiny offers two different modes of operation, it ships in Live Mode, where each control will operate manually, laying out your fate for you, clearly visible. Preset Mode in contrast lets you chose from one of the 8 unearthly, ethereal factory preset reverb fates, 1 for each reverb mode, the Astral Destiny comes with. Each of these can be edited or completely overwritten just like when the ancient Fates plucked or cut the strings of ones destiny. Save settings for Length, Depth, Rate, Tone, Mix as well as EXP assignment and Stretch length and recall them instantly. Any of the Astral Destiny's 8 reverb modes can be used as the basis for each of the 8 presets.

But beware! - There is no undo for preset saving, so make sure you are not overwriting your favorite sound, especially when you are saving presets from Live Mode! - Once the string of your fate is cut, there is no turning back on your destiny. Freely express any aspect of your Astral Destiny - Shipping with the EXP jack mapped to the Depth control, the expression control can also be swiftly assigned to Length, Rate, Tone, or Mix, plus different EXP assignments can be saved in each preset and you can also use Control Voltage with the EXP Jack.

Each Astral Destiny is built one at a time by a team of Los Angeles-based robots and a handful of real life humans in the occupied Erie territory presently known as Akron, Ohio.

Notes: NuX Reissue Analog Delay Pedal

Reissue series vintage delay pedal for guitar or bass. The delay effect records the guitar input and plays it back as multiple repeats, creating an echo effect. Vintage style analog circuitry uses BBD chips to deliver a warm tone, reminiscent of many classic guitar tracks from the 1980's and offers a less harsh and clinical tone than many modern digital delay units. A perfect introduction for newcomers to the delay effect or even for the experienced analog purists.

Pure analog "bucket-brigade" circuitry
True bypass hardware switching
Delay Time, Repeat & Blend controls

The box for this item contains :

Reissue series analog delay pedal
9V PP3 battery

Specifications:

Battery: 9V PP3 (supplied)
Power supply: Optional 9Vdc 300mA regulated (not supplied)
Controls: Delay Time, Repeat, Blend & foot switch
Input impedance: 1M Ohms
Output impedance: 10k Ohms
Dimensions: 121 x 77 x 48mm
Weight230g

Notes: NuX Reissue Series Plexi Crunch Pedal

Reissue series amp simulator pedal for guitar or bass. The Plexi Crunch provides a high gain distortion based on a hot-rodded British valve amplifier for classic crunch and heavy power chords. All analog circuitry ensures a pure signal path and both Tone and Presence controls closely mimic the same tone sculpting controls found on these classic amplifiers. Classic stack sounds for rock and metal guitar styles.

Pure analog amplifier simulation
True bypass hardware switching
Preamp, Master, Tone & Presence controls

The box for this item contains :

Reissue series plexi crunch pedal
9V PP3 battery

Specifications:

Battery: 9V PP3 (supplied)
Power supply: Optional 9Vdc 300mA regulated (not supplied)
Controls: Preamp, Master, Tone, Presence & foot switch
Input impedance: 1M Ohms
Output impedance: 10k Ohms
Dimensions: 121 x 77 x 48mm
Weight: 230g