Search dance music

Notes: Part of 1010's excellent Nanobox series, the Tangerine is a tiny powerhouse sampler. A fresh new approach to sampling, from one-shots to loops, all the way through to four-hour recordings.

Supplier's Notes:
Sweet and Tangy Sampling

The nanobox | tangerine delivers powerful sampling in an ultra portable form factor. With this nanobox, you can add recording, sample playback, clip launching, slicing, and musically intelligent looping capabilities to your desktop or travel rig. With an intuitive touch screen interface, nanobox | tangerine makes easy work of selecting, editing, and tweaking your samples. You can stream large samples of up to 4 GB file size straight from the microSD card. Interact with other musical components via MIDI. Load multi-sample banks with over 500 samples for amazing instrument reproduction. Tweak your configurations to get them just right, then save them to multiple presets for future reuse.

Top features

Play up to 24 stereo polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger stereo samples streaming directly from the microSD card

Play multi-sample banks with up to 16 velocity layers and 576 WAV files loaded in one preset

Configure 8 stereo sample pads per preset as single or multi-samples, clips, slicers, or new recordings

Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio

Trigger samples with the touch screen or MIDI input as one shots or melodic notes

Control how samples start and stop by choosing from one-shot, toggle, gate and piano (New!) launch modes

Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, and MIDI note and channel mapping

Quickly and easily use MIDI mapped controls for more tactile access to common parameters

Record up to 16 sequence layers per preset.

Get into the groove with a fast, fluid, and intuitive workflow

Make music anywhere thanks to a compact and nearly indestructible design

Recording Capabilities

Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Automate recording of a multi-sample bank via MIDI
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer

What is Included:
nanobox | tangerine - Compact Streaming Sampler
MicroSD card with 85 presets and over 1500 wav files
Colour matched USB power cord
Type B TRS MIDI To MIDI 5 Pin DIN adapter
Quick Start Guide

Technical Specs:

Power: USB-C connection 5V, 500mA
3.5mm audio input and output
Maximum input and output level: 2Vrms
DAC and ADC resolution: 24-bit
Internal resolution: 32-bit
Sample rate: 48kHz
MIDI Input: 3.5mm Type A/B auto sensing
MIDI Output: 3.5mm Type B
Clock Input: 1,2, 4, 8, 12 or 24 PPQ selectable
MIDI support: Note On/Off, Velocity, Pressure, Mod Wheel, Aftertouch, CC mappings to common parameters, program changes and clock
H x W x D: 1.5" x 3.75" x 3"
Weight: 0.25 lbs.
2" touch screen, 2 knobs and 4 buttons in a 3.75" x 3" x 1.5" package

Additional information

Weight: 0.65 lbs
Dimensions: 7.75 × 4.85 × 2.25 in

Notes: Really smart integration of macro controls for Eurorack, based on the original design by Emblematic Systems. Assign settings to eight CV outputs then morph with the crossfader or record movements to manage presets or set up complex real-time modulation. Can also operate as Catalyst Sequencer.

Supplier's Notes:
The Catalyst Controller is a macro controller with eight precision CV outputs and a responsive crossfader to morph between scenes. A scene is a snapshot of up to eight CV outputs, like a modular preset. Traverse a "pathway" composed of multiple scenes using the crossfader or an external CV signal, or immediately jump using the scene buttons. Record CV and slider movements, and play recordings back via a button or external trigger.

Each output has sub-millivolt precision and a maximum range of -5V to +10V. Channels have an adjustable morphing curve, can be quantized to common scales, restricted to a particular voltage range, or set to output gates.

Whether used as a CV preset manager, seamless transition generator, chord sequencer, CV recorder, or experimental CV playground, the Catalyst Controller puts control of your modular at your fingertips.

The Catalyst Controller can also turn into a Catalyst Sequencer! Hold down a special button combination to change between controller and sequencer modes. If you end up liking the Sequencer more, you can even remove the double-sided faceplate, flip it over, and re-install with the Sequencer artwork visible.

Based on the original Catalyst module from Emblematic Systems.

Specifications:

Smooth, responsive crossfade morphs between scenes
Eight output channels, each can be CV or Gate
Arrange scenes into pathways of up to 64 scenes
Smooth, responsive crossfader morphs from scene to scene along the pathway
Set slew/lag to limit how fast scenes can change
Adjustable Morph time per output
Control crossfading with an external CV
Record and playback up to 20 seconds of CV and crossfader motion
CV outputs can be set to -5V to +10V maximum, or limited to +/-5V, +5V, +3V, or +1V
CV outputs can be unquantized (sub-1mV resolution), or Quantized to common scales
Randomization of channel values/gates
Copy/paste
Based on the original Catalyst from Emblematic Systems

Pairs with: 4ms Catalyst Sequencer

Notes: The Catalyst Sequencer combines a traditional clocked step-sequencer with an unconventional phase-based sequencer to produce a new paradigm in sequencing. Eight precision CV sequencer channels can be simultaneously driven by a clock, a phase CV, or scrubbed manually with the crossfader.

Each of the eight channels has its own sequence length, quantizer, transposition, clock divider, randomization, voltage range (max -5V to +10V), and selectable CV (precise 16-bit resolution) or Gate mode.

Phase-based sequencing is an advanced form of sequencing where each step is selected by CV. The Catalyst Sequencer has a smooth, responsive crossfader that scrubs the sequence, playing it forward or backwards to track your motions. Patching in a CV signal will do the same: a ramp-up CV plays the sequence forwards, a ramp-down plays it backwards, a triangle plays it ping-pong, and complex waveforms generate new interesting rhythmic and melodic patterns.

The Catalyst Sequencer can also turn into a Catalyst Controller! Hold down a special button combination to change between sequencer and macro controller modes. If you end up liking the Controller more, you can even remove the double-sided faceplate, flip it over, and re-install with the Controller artwork visible.

Based on the original Catalyst module from Emblematic Systems.

Pairs with: 4ms Catalyst Controller

Notes: Neatly implemented performance mixer with four stereo channels. CV control of level and pan, two pre- or post-fader stereo send busses, quiet mutes and cueing via a front-panel headphone socket.

Supplier's Notes:
Four channel stereo production mixer

Mixer section

Each channel has the following:

Stereo or mono - Each channel can be treated as a stereo channel or a mono channel with two summed inputs.

CV inputs for both panning and level control

Two send buses - You can route each channel to one of two send buses. Each send bus is stereo. You can choose if you want the send to come before or after the level/panning controls.

Mute - The mute has both latching mute (up) and a momentary mute (down). The mute uses a capacitor to slow the turn off and on of the mute action. So it is mostly click-less, but you may find an occasional pop.

Cue bus - You can route each channel to the cue bus.

Mains Section

Two stereo sends outputs
Two stereo returns - which can also be used to directly insert into the main mix.
Main stereo outputs - level controlled with the slider and stereo VU meter.
Main mono output - summed output of the main L&R. If you are after an 8ch mono mix, you can use each channel in stereo mode, use the level control to control the level and then pan control to control the levels of the two channels.

Cue Section

1/4" Headphone jack along with level control
Fader control to listen to the main mix, cue mix, or an adjustable mix of the two.
Expandable

Bartenders can be cascaded to create 8ch, 12ch, or 16ch mixer. The main level is what is sent the main level control can act as a group control.

Barbacks can be added to add 2ch to your mix. Barbacks can also be cascaded enabling up to a 16ch mixer configuration.

Send-VCA can be added for CV control of the level of the send.

DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 24hp
12V: 260mA
-12V: 225mA

Notes: A unique hardware synth, Aodyo's Anyma Phi uses physical modelling mixed with virtual analogue oscillators and filters, creating a versatile setup for sounds from resonant acoustic timbres to experimental hybrid sounds.

Supplier's Notes:
Explore and create your own sounds

Discover Anyma Phi, the essential physical modelling synthesizer. Your portal to creating new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

The best of both worlds

Anyma Phi blends the classic ingredients of electronic music, like oscillators and filters, with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Create Unique Sounds; sound design for all

The matrix provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation: Excite, Vibrate, Resonate, Global, and Animate.

Infinite Possibilities; a semi-modular powerhouse

Beyond the matrix lies an insanely powerful semi-modular synthesis engine where you can harness a wide variety of oscillators and effects, and control them effortlessly using an impressive modulator system. Going so deep into sound design has never been easier before with such a small box!

Anyma Phi Editor; standalone, but well-connected?

The Anyma Phi can hold up to 200 patches, and everything you need to create them is right on the machine. You can also benefit from the large screen of your computer (PC or Mac) to edit, manage and share patches even more easily, in a streamlined environment that displays all the synth modules at once and their interactions in real time. Learn more about the Anyma Phi's Updates and Downloads.

MIDI Controller; In tune with its environment

With its small form factor, it can sit on your keyboard, or anywhere on your desk. You can control it using any MIDI controller, keyboard or sequencer, with first-class support for wind controllers, like Sylphyo. And it also shines with World and microtonal music*!

Just Tap and Scratch; the world is your oyster

With its stereo input, you can also use the Anyma Phi as a versatile effects processor for your other gear, or use any external sound to excite its resonators and other physical models. And you don't even need a mic to get interesting sounds: just tap and scratch directly on the case of the Anyma!

Technical specifications:

Hybrid monophonic synthesizer, with physical modelling components
Memory: 200 patches
Stereo audio outputs:
L-R 1/4" mono line jack outputs
1/4" stereo headphone jack output
Stereo audio inputs:
1/4" stereo jack audio input
Internal piezoelectric mic when external input unplugged
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine:
3 oscillator slots (more than 40 types, including wind/string physical models, modal resonators, virtual analogue and digital algorithms)
5 effect slots (more than 30 types, including resonators, granular processors, and FM operators) along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots (more than 40 types, including envelope generators, LFO, curves, interpolators, slew limiters, sequencers, physical and algorithmic processes, etc.)
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with sidechain input and min/max/curve/smoothing
Responsive to pitch, pitch-bend, velocity, breath control/expression, as well as 4 other controller inputs (with MIDI learn)
External MIDI CC control for the matrix and the entire patch (via NRPN)
World-class microtonal support: up to 8 custom tunings, 50 onboard presets, onboard editor, MTS import/export
Built-in arpeggiator: 15 patterns, internal/external MIDI clock sync, custom triggers
Support for up to 3-note paraphony when building a patch
External audio processors
Automatic random patch generation (optional)
Free software editor/librarian (Mac/PC)
225 x 120 x 70 mm (8.9 x 4.7 x 2.8") and 900 gr (2 lbs)
Included: Anyma Phi, 5V PSU and USB cable
Designed and made in France

Notes: ***B-STOCK: Box opened, product in perfect working order***


Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Pro VLA II is a tube driven Vactrol-based compressor/leveling amplifier designed to excel in any professional audio environment. Superior performance and an incredible tone makes the Pro VLA II and indispensable tool for tracking, mixing, mastering, dynamic control of live sound sources or for use in broadcast audio.

Capable of delivering a far more musical natural sounding and sonically transparent compression than competitive units in its class, the Pro VLA II uses an Opto-electronic circuit rather than the more typical design VCA driven level detection circuit. This VCA-less design coupled with a 12AT7 vacuum tube in the gain stage makes the Pro-VLA II the ideal dynamic control device for critical audio applications.

Exceptional signal integrity with extremely low noise and low distortion is achieved in the Pro VLA II by utilizing a transformerless design throughout.

Unlike typical compression units that use Voltage Controlled Amplifiers (VCA's) to handle level detection, the Pro VLA II's Opto-electronic design allows a far more transparent and musical sounding compression without sounding aggressive or un-natural. This Vactrol based optical electronic circuitry is the basic component of the classic highly sought after compressors of past.

The Vactrol design allows the Pro VLA II to react to audio signal in much the same way the eye naturally adjusts to fluctuations in light levels, smoothly, quietly and almost imperceptibly.

The Pro VLA II is a soft knee leveling amplifier by design. Although capable of providing dramatic compression effects, the Pro VLA II was designed to excel in any application where transparent, expressively musical dynamics control is desired.

Large highly visible backlit analog VU meters accurately display input and output levels while extremely fast 10-segment LED's display gain reduction. For added functionality, the LED's display either average level for mastering & mixing applications or peak hold for monitoring individual sources when tracking audio.

XLR and 1/4" TRS balanced inputs and outputs are provided to ensure the Pro VLA II can connect with any audio source or hardware. A +4 dBu/-10 dBu mode switch optimizes the Pro VLA II I/O for either consumer or professional equipment.

Notes: Chroma version of Arturia's flagship KeyStep Pro, a brilliantly versatile sequencer and controller keyboard capable of controlling MIDI synths, drum machines and analogue gear via CV.

Supplier's Notes:
KeyStep Pro Chroma

Sequencing mastermind recoloured

KeyStep Pro Chroma is a special-edition version of the unparalleled 4-track sequencer & keyboard, embellished with a sleek dark grey finish, great-feeling knob caps and customizable track colours. The same all-in-one power, with more edge.

The future is sequenced

Rediscover the controller keyboard that changed the sequencing game, upgraded with a futuristic exterior and supercharged with unique creative functionality.

Chroma aesthetic

Retrofit your musical setup with sleek cyberpunk attitude. KeyStep Pro Chroma features a dark grey casing, vivid blue LEDs, and striking knob caps.

Customize your flow

Exclusive to KeyStep Pro Chroma, you can customize the LED colours for each of your tracks - so every project and composition looks as unique as it sounds.

The must-have sequencer

KeyStep Pro remains the benchmark for hardware & software sequencing and creative performance alike. Chroma is no exception: your sequencing mastermind

Abundant connectivity

From Eurorack modules, to analogue synths and VST's, synchronize all your gear and unleash your creativity in style.

Enterdark mode

Fusing utility with aesthetics, creativity with beauty, and sleek design with vivid colour, KeyStep Pro Chroma delivers next-level performance with pure style.

Exterior

A dark grey shell simultaneously gives this controller space station futurism and classic car attitude.

Lights

Icy blue LEDs illuminate Chroma's metal exterior, while customizable track colours inject perfectly-contrasting vibrancy.

Controls

Complementing the cool grey shell and vivid LEDs, Chroma's controls feature premium, great-feeling stylish caps.

Control hardware, software & DAW at the same time

Looking for the best modular sequencer?

How about a MIDI controller for Ableton? Or a live performance keyboard that can sync all of your favourite synths to a DAW click track? KeyStep Pro's extensive list of controls, connections, and creative functions are designed to tick every box - let's take a closer look:

The ultimate multi-function controller

Command complex hardware setups, entire DAW setlists, modular racks, and more - all with a user-friendly workflow that prioritizes creativity.

KeyStep Pro remains unique and unmatched in its balance of performance-oriented playability, massive connectivity, and creative depth.

Main Features

Unique dark grey design with blue LEDs and stylish knob caps

Customizable track colours

37 note slim keys, velocity and aftertouch sensitive
LED above each key for efficient visual feedback

Four track step sequencer
16 step buttons, up to 64 steps per sequence
Up to 16 notes of polyphony per step

Melodic sequencer
Real-Time recording, step recording, step editing
Pitch, velocity, gate length, time shift and probability for each note
Scale quantization with user scales
Polyphonic CV outputs

Drum sequencer

24 part drum sequencer
Polyrhythm

Performance-oriented sequencer
Forward and two random playing modes
Pattern randomization
Quantized or unquantized recording
Looper

Arpeggiator

7 arpeggiator modes, 5 octave range

What's in the box

Box content

KeyStep Pro unit
Registration card
Quick Start
USB cable
Power supply

Dimensions
Size : 23.2 x 8.2 x 1.5 inches (589 x 208 x 38mm)
Weight : 5.9 lbs. (2.7 Kg)

Notes: The latest update of Arturia's legendary plugin collection, featuring 39 instruments, three expansion packs and over 9,000 presets. New instruments include CP-70 V, MiniFreak V, Acid V and three Augmented collections.

Supplier's Notes:
V Collection X

Reference instruments for music makers
A premium suite of software instruments for unparalleled sonic exploration; from evocative emulations and hybrid synth engines, to authentically modelled keyboards and beautifully captured acoustic sounds - enhanced for today's production workflow.

This is V Collection X

Immerse yourself in an unparalleled music-making experience with iconic sounds and essential tools to suit your style, performance needs and production workflow. 39 instruments, 3 exclusive expansion packs, thousands of world-class presets - 1 canvas for infinite sonic exploration.

The ultimate selection

A hand-picked, expertly-engineered suite of instruments combining timeless sonic craft with cutting-edge enhancements that seamlessly integrate with demanding production workflows. The most iconic synths, blissful keyboards, evocative hybrids and faithfully captured acoustic instruments for endless inspiration, vivid composition and boundless play.

10,000+ presets

Find the crucial mix-finishing sounds you need in a few clicks with V Collection X's expansive library of expertly-designed sounds, complete with easy browsing. Tap right into any style, any instrument, any time.

Easy to use

You don't need to be an expert to enjoy professional sound. The instruments in V Collection X are designed with accessibility in mind, equipped with intuitive interfaces, interactive in-app tutorials, and intelligent features that deliver electrifying results without hassle.

Perfected for you

High-performance features that you can count on, premium sound quality you deserve; V Collection X is the result of over 20 years of engineering innovation, musical exploration, and a passion for audio excellence and expressivity.

39 Software titles

Augmented WOODWINDS
Augmented GRAND PIANO
Augmented BRASS
Augmented STRINGS
Augmented VOICES
Korg MS-20 V
SQ80 V
CS-80 V
Prophet-5 V
Prophet-VS V
Piano V
Analog Lab V
Vocoder V
Jun-6 V
OP-Xa V
Mellotron V
Synthi V
CZ V
CMI V
Clavinet V
Acid V
MiniFreak V
CP-70 V
DX7 V
Buchla Easel V
Synclavier V
Emulator II V
B-3 V
Mini V
Stage-73 V
Matrix-12 V
Farfisa V
Solina V
SEM V
Jup-8 V
ARP 2600 V
VOX Continental V
Wurli V
Modular V

Platform specifications

Windows

Win 10+ (64bit)
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost)
32GB free hard disk space
OpenGL 2.0 compatible GPU
ARM processors not supported on Windows

Required configuration

Works in Standalone, VST, AAX, Audio Unit, NKS* (64-bit DAWs only).

Apple

Mac OS 11.0+
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost) or Apple Silicon CPU
32GB free hard disk space
OpenGL 2.0 compatible GPU

Work with ASC

An elegant and simple solution to help you install, activate, and update your Arturia software instruments.

Notes: Befaco's unique GameBoy-based effects module allows you to change effects by swapping cartridges, all with CV control over key parameters. Effects include Skuara's harsh fuzz, Instruo's micro phaser and much more.

Supplier's Notes:
A crazy idea with the support of a bunch of crazy people.

A Multi FX module based on game carts!

FxBoy is a multi-FX module designed in collaboration with several talented manufacturers.

This is an effect unit with CV control over the parameters and Dry/wet control, with a Built-in CV controllable four bands EQ.

Each effect is physically hosted in a hot-swappable game cart and designed by a different manufacturer: Touell Skouarn with Skuara a harsh fuzz with overdrive, Instruo with micro Phaser, a two-flavoured Phaser, Feedback modules with a vintage Flanger, XOR with FX-Girl, a digital double effect module: Delay + Granularizer, Making sound machines with an analogue Wave folder, Tesseract with a bit crusher and Befaco Trash distortion!

What have these crazy people put in their cartridges?

Trash

Trash is a harmonic distortion that combines both clipping and folding flavours. Modes A and B will select between aggressive and more aggressive flavours!

Flanger

Analogue Wavefolder

Eskuara

AVMA
AVMA by Tesseract Modular is a bipolar VCA with one switchable wavefolder stage followed by an analogue frequency reducer. The VCA gain is x2, it can be used with i5V oscillator signals at the CV input for ring modulation effect.
Micro Phaser

Three cascaded all-pass filters, a built-in LFO and a saturator in the feedback path.

The purpose for this cartridge is to completely f&%k your phase up!

Instruo - We make sounds with the things that we make to make sounds with.

Technical Specifications

CV control over all parameters and Dry/wet
CV controllable four-band EQ, routable post or pre-effect.
Hot swap for all carts.
Selector for two different flavours of each cart.
Open specifications to design your own carts

Specs

Current needs: +12V: 125mA, -12V: 100mA, 5v: 0mA
Width: 12 HP
Depth: 35 mm (including power connector)
Aluminium, heat-treated front panel.
Designed and assembled in Barcelona.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Befaco's unique GameBoy-based effects module allows you to change effects by swapping cartridges, all with CV control over key parameters. Effects include Skuara's harsh fuzz, Instruo's micro phaser and much more.

Supplier's Notes:
A crazy idea with the support of a bunch of crazy people.

A Multi FX module based on game carts!

FxBoy is a multi-FX module designed in collaboration with several talented manufacturers.

This is an effect unit with CV control over the parameters and Dry/wet control, with a Built-in CV controllable four bands EQ.

Each effect is physically hosted in a hot-swappable game cart and designed by a different manufacturer: Touell Skouarn with Skuara a harsh fuzz with overdrive, Instruo with micro Phaser, a two-flavoured Phaser, Feedback modules with a vintage Flanger, XOR with FX-Girl, a digital double effect module: Delay + Granularizer, Making sound machines with an analogue Wave folder, Tesseract with a bit crusher and Befaco Trash distortion!

What have these crazy people put in their cartridges?

Trash

Trash is a harmonic distortion that combines both clipping and folding flavours. Modes A and B will select between aggressive and more aggressive flavours!

Flanger

Analogue Wavefolder

Eskuara

AVMA
AVMA by Tesseract Modular is a bipolar VCA with one switchable wavefolder stage followed by an analogue frequency reducer. The VCA gain is x2, it can be used with i5V oscillator signals at the CV input for ring modulation effect.
Micro Phaser

Three cascaded all-pass filters, a built-in LFO and a saturator in the feedback path.

The purpose for this cartridge is to completely f&%k your phase up!

Instruo - We make sounds with the things that we make to make sounds with.

Technical Specifications

CV control over all parameters and Dry/wet
CV controllable four-band EQ, routable post or pre-effect.
Hot swap for all carts.
Selector for two different flavours of each cart.
Open specifications to design your own carts

Specs

Current needs: +12V: 125mA, -12V: 100mA, 5v: 0mA
Width: 12 HP
Depth: 35 mm (including power connector)
Aluminium, heat-treated front panel.
Designed and assembled in Barcelona.

Notes: Updated version of Boss's popular Katana amp, here in 100W combo incarnation. Designed with versatility in mind, the Katana offers five core amp characters, effects and Tube Logic valve emulation.

Supplier's Notes:
Katana MkII takes the acclaimed Katana guitar amp series to the next level, turbocharging the core platform with more sounds, more effects, and more features. Newly voiced variations are now available for all five amp characters, doubling the tonal options. And the onboard effects categories have been expanded from three to five, providing even more real-time processing to choose from. The usability has been ramped up too, with a power amp input for modelers and multi-FX, easy stereo expansion for dual amp setups, updated editor software, and many other enhancements.

More Sounds, More Versatility

The stage-class Katana MkII lineup picks up where the first generation left off, building on the same core tones and features that have made the series such a worldwide smash. If you loved the original Katana amps, you'll love Katana MkII even more. And if you're new to the party, get ready for sound, feel, and versatility that soars far beyond its price class.

Five Amp Characters, Ten Overall Tones

Katana MkII's five primary amp characters offer everything from organic vintage tones to modern high-gain sounds, plus a dedicated voice optimized for acoustic-electric guitar. The characters have now been extended with newly voiced variations, providing a wider palette of tone options to craft your personal sound.

Five Effects At Once

Katana MkII now includes five simultaneous effects categories, putting the tone-shaping power of a massive pedalboard right inside your amp. Independent Booster, Mod, FX, Delay, and Reverb sections come loaded from the factory with three variations in each, providing 15 ready-to-play effects to choose from. Connecting to BOSS Tone Studio lets you dive much deeper if you want-customize the sections with over 60 different effect types, change the order with four different chains, and much more.

Full-Throttle Sound Every Time You Plug In

Backed by BOSS's Tube Logic approach, Katana MkII delivers the authentic output distortion characteristics of genuine tube amplifiers, with the sound and feel becoming richer and more responsive as you turn up the volume. But unlike that classic tube amp, Katana MkII's variable Power Control makes it easy to fly in the sweet spot without getting fired from the gig or kicked out of the house. Just throttle back the overall volume as needed to enjoy inspiring, cranked-amp sound anywhere you play, from bedroom to stage.

Amplify Your External Gear

The Katana-100 MkII rocks as a standalone amp, but it also excels as a powered cabinet for a favourite preamp, modeler, or multi-effects unit. Connecting to the rear-panel Power Amp In jack bypasses Katana MkII's preamp and effects, letting you tap straight into the Tube Logic power section, complete with grab-and-go Power Control. And with BOSS Tone Studio, the input can be easily optimized for your particular gear with a high-pass filter and adjustable gain.

One-Touch Recall Of Custom Setups

One of the Katana-100 MkII's most powerful features is the ability to store favourite amp character and effects setups in Tone Setting memories for instant recall. After you've dialled in a sound with the panel controls, simply save it to the desired memory with a quick button hold. Eight Tone Settings (two banks of four) are available, with fast selection right from the panel. And for hands-free operation on the gig, just connect external footswitches or the GA-FC foot controller.

Specifications

Rated Power Output: 100 W
Nominal Input Level
INPUT: -10 dBu (1 M ohm)
AUX IN: -10 dBu (20 k ohms)
RETURN IN: -10 dBu (100 k ohm)
Speaker: 30 cm (12 inches) x 1
Controls: POWER switch, MASTER knob, PRESENCE knob, POWER CONTROL switch (STANDBY, 0.5 W, 50 W, 100 W)
[AMPLIFIER] VARIATION button, AMP TYPE knob (ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN), GAIN knob, VOLUME knob

[EQUALIZER]: BASS knob, MIDDLE knob, TREBLE knob

[MULTI EFFECT]: BOOSTER button, MOD button, FX button, DELAY button, REVERB button, TAP button, BOOSTER knob, MOD knob, FX knob, DELAY knob, REVERB knob

[TONE SETTING] CH1 button, CH2 button, CH3 button, CH4 button, PANEL button

[STEREO EXPAND] STEREO EXPAND switch
Indicators: VARIATION, ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN, BOOSTER, MOD, FX, DELAY, REVERB, TAP, CH1, CH2, CH3, CH4, PANEL

Connectors
INPUT jack: 1/4-inch phone type
POWER AMP IN jack: 1/4-inch phone type
LINE OUT jack: 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
REC OUT/PHONES jack: Stereo 1/4-inch phone type
EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
GA-FC jack: 1/4-inch TRS phone type
AUX IN jack: Stereo miniature phone type
USB port: USB B type
AC IN jack
Power Consumption: 77 W
Accessories: Owner's manual, Power cord, GA-FC sticker

Options (sold separately) Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
GA FOOT CONTROLLER (GA-FC, GA-FC EX)
Amplifier Stand: BAS-1

Size & weight

Width: 530 mm / 20-7/8 inches
Depth: 248 mm / 9-13/16 inches
Height: 484 mm / 17-1/2 inches
Weight: 14.8 kg / 32 lbs 11 oz

Notes: Crafted with the breakthrough design philosophy behind the acclaimed Katana guitar amp series, the Katana-110 Bass delivers premium sound and advanced features perfectly tuned for the needs of serious bassists. Three unique amp characters and onboard BOSS effects provide a wide range of tones, backed by a stage-ready, 110-watt class AB power amp, custom 10-inch woofer, and tweeter with on/off switch. And with comprehensive EQ, flexible connectivity, and more, the Katana-110 Bass is ready to take on any playing situation, from stage to studio to everyday practice at home.

Refined Tone And Authoritative Power

The Katana-110 Bass brings you high-performance amplification fuelled by decades of BOSS knowledge and expertise. Armed with 110 watts of time-tested class AB power, this gig-ready amp provides big volume, punch, and presence and smooth, natural drive as you turn up the gain. Three unique preamp types are also available-each with a powerful three-way Shape switch to fine-tune the character-so you'll always have the perfect sound for any style or genre.

Vintage-A classic tube voice with organic tone and natural drive.
Flat-Smooth, clear, and dynamic tone with rich harmonic character.
Modern-Quick dynamic response with extended bass range.

Command The Stage

With its custom-designed speaker system and rock-solid combo cabinet, the Katana-110 Bass produces a commanding voice to drive your band in any musical situation. The fundamental tone of the 10-inch woofer is complemented with a tweeter for high-frequency definition that's ideal for slap and other modern playing styles. Our efficient bi-amp design delivers clear and balanced sound, and the tweeter can be turned off with a panel switch for a more traditional bass tone if desired.

Four Independent Effects Sections

The Katana series is famous for its onboard BOSS effects, and the Katana-110 Bass is no exception. Dedicated comp/limiter and drive sections provide core processing, while FX1 and FX2 offer a treasure trove of options from the BOSS bass effects library, from standards like chorus and flanger to octave, bass synth, and more. The FX2 section also includes delay and reverb, and over 60 total effect types are available for loading via the BOSS Tone Studio editor.

Precision Sound-Crafting Tools

With the intuitive panel controls on the Katana-110 Bass, you can quickly refine your tone in detail. The studio-inspired Blend section lets you mix in some dry signal, which you can pre-shape from the panel with three customizable settings for the optimum tonal fusion. A comprehensive four-band EQ is also on hand, complete with three selectable frequency centres in the low-mid and high-mid bands.

Rich Performance Versatility

The flexible Katana-110 Bass is your perfect partner for any live gig. Six Tone Setting memories are available for storing and recalling the sounds you create, including preamp type, EQ, Blend, and effect settings. You can switch memories from the panel and go even further with optional footswitches, an expression pedal, and the GA-FC Foot Controller. There's also a balanced XLR output for connecting to a house PA, along with a switch to select between direct, pre, or post signals.

Recording And Practice Powerhouse

The Katana-110 Bass is equally suited for studio recording and home playing. The compact footprint takes up minimal space, and the variable Power Control lets you dial up cranked-amp tones at family-friendly volume levels. A headphones/recording jack provides a direct output with effects and mic'd cab emulation with three Air Feel settings, while USB lets you interface with computer production software and track with great tone.

Specifications
Output Power: 60 W continuous (RMS), 110 W peak
Nominal Input Level: INPUT: -10 dBu (1 M ohm), POWER AMP IN: -10 dBu (20 k ohms), AUX IN: -10 dBu (20 k ohms), RETURN IN: -10 dBu (100 k ohm)
Speaker:
WOOFER: 25 cm (10 inches) x 1
TWEETER: x 1
Controls: POWER switch, MASTER VOLUME knob, POWER CONTROL switch (STANDBY, 1 W, MAX), TWEETER button

[INPUT EFX]: COMP button, DRIVE button, COMP knob, DRIVE knob

[AMPLIFIER]: PAD button, SHAPE button, TYPE knob (VINTAGE, FLAT, MODERN), GAIN knob, VOLUME knob

[BLEND]: BLEND button, DRY LEVEL knob

[EQUALIZER]: LOW MID button, HIGH MID button, BASS knob, LOW MID knob, HIGH MID knob, TREBLE knob

[EFFECTS]: FX1 button, FX2 button, TAP button, FX1 knob, FX2 knob

[TONE SETTING]: CH1 button, CH2 button, CH3 button, PANEL button

[BALANCED OUT]: GND LIFT switch (OFF, ON), SELECT (POST, PRE, DIRECT)
Indicators: COMP, DRIVE, PAD, SHAPE, BLEND, LOW MID, HIGH MID, FX1, FX2, TAP, CH1, CH2, CH3, PANEL, TWEETER

Connectors:
INPUT jack: 1/4-inch phone type
POWER AMP IN jack: 1/4-inch phone type
BALANCED OUT jack: 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
REC OUT/PHONES jack: Stereo 1/4-inch phone type
EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
GA-FC jack: 1/4-inch TRS phone type
AUX IN jack: Stereo miniature phone type
USB port: USB B type
BLUETOOTH ADAPTOR SLOT: Bluetooth Audio MIDI Dual Adaptor
AC IN jack
Power Consumption: 77 W
Accessories: Owner's manual, Power cord, GA-FC sticker

Options (sold separately): Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
GA FOOT CONTROLLER (GA-FC)
Bluetooth Audio MIDI Dual Adaptor (Model BT-DUAL)

Size & weight
Width: 470 mm / 18-9/16 inches
Depth: 300 mm / 11-13/16 inches
Height: 500 mm / 19-11/16 inches
Weight: 16.8 kg / 37 lbs 0.6 oz

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Second-generation version of Boss's excellent looper gives you five stereo tracks, four simultaneous effects, hands-on control and full MIDI support. Ideal for live use but also a creative studio tool.

Supplier's Notes:
Looping Magic at Your Fingertips

Packed with inspiring tools for on-the-spot music creation, the RC-505mkII brings next-generation power and flexibility to the world's most popular tabletop looper. Elevate your performances with five stereo tracks and four simultaneous Input FX and Track FX, and soar even further with customizable buttons, expanded I/O, increased mixing control, and other enhancements requested by long-time RC-505 users. Built for free-flowing expression on stage and in the studio, the RC-505mkII is a dream machine for beatboxers, vocalists, multi-instrumentalists, and other fearless looping artists.

More to Love

The RC-505mkII retains everything that made the original so loved and adds a wealth of new features to make the looping experience even more creative and free flowing. The faders provide longer throw for finer adjustments, and they also have a more solid feel under the fingers. And each track now has dedicated FX and Track buttons, making it easier to colour and control your loops in the heat of the moment. Undo/redo has also been enhanced with a Mark Back function that lets you instantly jump back to a previous loop state while performing.

Customize Your Workflow

While the original RC-505 was very customizable, the RC-505mkII takes things to the next level with a vast range of user-configurable controls. You can assign various CTL parameters to the FX and Track buttons and trigger them with a press, hold, or double-click. Pressing the Undo/Redo button reveals a secondary layer, doubling your options. Two external control jacks are also available for connecting footswitches or expression pedals, and each has its own dedicated set of parameters. Crave even more? Then tap into the Assign screens to set up 16 different targets for hardware control and MIDI operation.

More Sonic Colours for Inspired Looping

Sonic variations help make loop performances more compelling, and the RC-505mkII provides a greatly expanded FX palette to colour your sounds during recording and playback. There are 49 Input FX and 53 Track FX types to choose from-including powerful new vocal harmony effects-and you can use up to four in each section at once. Going further, groups of four Input FX and Track FX can be stored in four banks for quick recall, along with toggle or momentary button settings for each type. A step sequence function is also available in some FX to automate parameter changes for dynamic real-time movement.

SPECIFICATIONS

Sampling Frequency: 44.1 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point

Recording/Playback
Number of Tracks: 5
Data Format: WAV (44.1 kHz, 32-bit float, stereo)
Maximum Recording Time: Approx. 1.5 hours (1 track), Approx.13 hours (total of All memories)

Rhythm Type: 200 types or greater
Rhythm Kit: 16 types

Effect:
INPUT FX: 49 types
TRACK FX: 53 types
MASTER FX: 2 types
Memory: 99
Nominal Input Level: MIC 1, 2 INPUT: -40 dBu/INST 1, 2 INPUT: -10 dBu
Maximum Input Level: MIC 1, 2 INPUT: 0 dBu/INST 1, 2 INPUT: +7 dBu/+20 dBu (selectable)
Input Impedance: MIC 1, 2 INPUT: 3k ohms/INST 1, 2 INPUT: 1 M ohms/25 k ohms (selectable)
Nominal Output Level: MAIN OUTPUT: -10 dBu/SUB 1, 2 OUTPUT: -10 dBu
Maximum Output Level: MAIN OUTPUT: +7 dBu/SUB 1, 2 OUTPUT: +7 dBu
Output Impedance: MAIN OUTPUT: 1 k ohm/SUB 1, 2 OUTPUT: 1 k ohm
Recommended Load Impedance: MAIN OUTPUT: 10 k ohms or greater/SUB 1, 2 OUTPUT: 10 k ohms or greater

Controls:
TRACK1--5 REC/PLAY button, TRACK1--5 STOP button, TRACK1--5 TRACK button, TRACK1--5 FX button, ALL START/STOP button, UNDO/REDO button, TAP TEMPO button, RHYTHM START/STOP button, RHYTHM EDIT button, INPUT FX A--D button, INPUT FX EDIT button, TRACK FX A--D button, TRACK FX EDIT button, MENU button, LOOP button, ENTER button, EXIT button, PAGE buttons, 1--4 knobs, OUTPUT LEVEL knob, TRACK1--5 LEVEL Faders

Display:
Graphic LCD (128 x 64 dots, backlit LCD)

Connectors:
MIC IN 1, 2 jack: XLR type (balanced, phantom power: DC 48 V, 10 mA Max
INST IN 1, 2 jacks, MAIN OUT jacks, SUB OUT 1, 2 jacks: 1/4-inch phone type
PHONES jack: Stereo 1/4-inch phone type
CTL1,2/EXP1 jack, CTL3,4/EXP2 jack: 1/4-inch TRS phone type
USB port: USB B type
MIDI (IN, OUT) connectors
DC IN jack

Power Supply: AC adaptor
Current Draw: 1.0 A (with phantom power), 0.9 A (without phantom power)
Accessories:

AC adaptor
Owner's Manual
Leaflet "USING THE UNIT SAFELY"

Options (sold separately):
Footswitch: FS-5U
Dual Footswitch: FS-6, FS-7
Expression Pedal: FV-500H, FV-500L, EV-30, Roland EV-5

SIZE AND WEIGHT

Width: 420 mm/16-9/16 inches
Depth: 234 mm/9-1/4 inches
Height: 67 mm/2-11/16 inches
Weight: 1.8 kg/4 lbs

Notes: Neat little interface module to help pad controllers play nicely with Eurorack. Hook up a device like a Launchpad or APC and jam out rhythms with retriggering options, dynamic control and MIDI sync.

Supplier's Notes:
Triggerpad is a dynamic trigger/gate sequencer in eurorack format on only 6hp. A USB MIDI controller with an 8×8 grid like Launchpad or APC is used to display and edit the patterns (see the list of compatible controllers). The user experience is tailored to live performance and detailed composition: dial in simple rhythms or complex polyrhythms, retrigger at audio rate, create dynamic percussions with velocity triggers or use longer pulses to create steppy modulations.

By using USB MIDI controllers that you might already have and maybe not use anymore, we avoid producing more plastic. Give your old gear a second life!

Dimensions & consumption

Width: 6hp
Depth: 39mm
+12V: 120mA (without USB MIDI controller connected)
-12V: 20mA
5V: 0mA
USB MIDI controllers consume up to 150mA on +12V

Connectivity

8 dynamic trigger/gate outputs (0-10V)
USB MIDI Host
Clock in
Clock out
Reset in
Reset out

Compatibility

Launchpad Pro Mk3
Launchpad X
Launchpad Mini Mk3
Launchpad Mini Mk2
Launchpad Pro
Launchpad Mk2
Launchpad S
APC Mini Mk1
APC Mini Mk2

Notes: ***B-STOCK: Box opened, product in perfect working order***


Typhon has been developed with ultimate care and love, so as to be a great-sounding, portable and affordable synthesizer. It has a complex modulation routing, 256 preset memory, a 32 note sequencer, and powerful stereo effects developed by Sinevibes.

Since it is packed in a compact USB powered box, it can be carried everywhere you go!

Specifications & Connections:

USB powered (at least 500mA)
60 Playing hours with 20,000mA portable power bank
MIDI Din IN and OUT
1/4 in Stereo Out
1/8 in Headphone Out
1/8 in Mono Audio In (for routing via Typhon FX)

Dimensions: 23 x 13 x 6 cm
Weight: 1kg

Notes: Dtronics DT-1000, A hardware controller for the Roland Boutique D-05 and D-50/D-550

The Dtronics DT-1000 is a hardware controller for the Roland Boutique D-05 and D-50/D-550.

The DT-1000 can also be operated on a vintage Roland D-50 / D-550

Almost every parameter of the Roland D-05 gets its own slider, 10 keys and 56 pots in a nice and solid desktop case.

Some pots are doubly assigned, but can be switched quickly and are very easy to read.

For Roland Boutique D-05 Linear Synthesizer
Also compatible with Roland D-50 and D-550 vintage synthesizers
Direct access to all important parameters of the Roland Boutique D-05
10 Buttons and 56 pots
Robust housing
MIDI input and output
USB

Included in the box:
Dtronics DT-1000
DIN(5) MIDI cable
USB cable


Specifications
Material: high-quality plastic
Height: 44 mm
Width: 300 mm
Depth: 200 mm
Weight: 0.985 gram
DIN cord (DIN5P) is included
Power consumption USB or DIN: 60mA

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Collabing with YouTube sensation Andrew Huang, Endorphin.es offer up this impressive multipurpose processor module. Building blocks of stereo filtering, compression, reverb and more offer huge creative potential.

Supplier's Notes:
In collaboration with Andrew Huang, based on his modern music production techniques, Endorphin.es developed a creative audio processor with multiple blocks that can be moved around in order to achieve different flavours for sound design.

Processing unit without fixed structure: intuitively create astonishing and ephemeral timbres, from atmospheric rumbles to heavy or distorted textures.
Creative stereo effect processor with delay, reverb, filter and distortion with quickly explorable routing chain with single button press.
New generation ARM Cortex - M7 processor with 96 kHz 32 bit internal processing.
Lush hall and whooshing reverse reverbs with audio freeze and pre-delay.
Sidechain audio ducking envelope available both internally and externally with additional one knob single band compressor.
Tap delay with maximum delay time up to 2.5 seconds, external clock input with onboard clock divider and 1v/oct time control.
8x oversampled distortion algorithm.
Pre- and post - VCA, tone and volume controls with extra gain.

Power consumption
135 mA +12V
35 mA -12V
0 mA 5V

Dimensions
16 HP
26 mm deep with power ribbon cable connected.

Notes: Pedal version of the excellent Golden Master module, featuring multi-band end-of-chain processing with EQ, compression and mid/side stereo widening effects. Ideal for bass or guitar.

Supplier's Notes:
On-stage mastering

Based on Endorphin.es' Golden Master eurorack module and our experience in electronic live music performances, Endorphin.es developed Golden Master - a multiband processor pedal to deliver high pressure audio for live concerts and venues: sound loud without overloading the master limiter.

Multiband processor consists of EQ, compressor and mid-side

24 bit 96 kHz audio I/O with 32 bit internal processing

Stereo enhancer for each of the 3 bands

High impedance inputs, pseudo-balanced outputs: works also as a DI-box on stage

One knob compressor per band along with global threshold allows you to intuitively achieve results

Dedicated expression pedal for master volume control

Two footswitches let you select presets and bypass with your feet

Notes: Immerse yourself and go beyond the boundaries of what is possible with a conventional guitar or synth pedal. GHOST PEDAL brings you new possibilities of tone shaping with its state of the art flexible audio routing chain, allowing you to jump between dimensions with a single press of a button.

From earth shaking subharmonics and distorted drones to angelic shimmer reverbs and anything in between, GHOST is a PEDAL for the adventurous sound designers and the most demanding guitar and synth players. Intuitive UI coupled with hands-on control and preset storage allows you to stay in the now and focus on your performance.

Unique user interface showing parameter values and real-time modulations

Line or high-impedance JFET guitar inputs with cabinet simulator

Full MIDI control over every parameter incl. MIDI clock over LFO and delay

True relay stereo, buffered and trails bypass modes

Bipolar LFO and expression pedal assignments to any parameter

3 reverb and 3 filter types, incl. comb with resonator, six possible routing variations

Reverb freeze, delay looper, spring reverb with virtual spring excite

Three footswitches let you change assignable parameters (tap tempo/freeze/spring excite), select presets and bypass with your feet

Notes: A collaborative effort between the techno icon and one of the best synth brands around, the Bullfrog is designed to encourage newcomers to analogue synths while secretly packing killer sound and some innovative features.

Supplier's Notes:
Introducing Erica Synths X Richie Hawtin Bullfrog

Learn. Produce. Perform

Created by Erica Synths & Richie Hawtin, Bullfrog is an educational electronic music instrument designed to captivate and inspire both youth and professionals alike. Bullfrog invites you to unlock musicality while combining the thrill of electronic music production with a comprehensive learning experience.
Bullfrog is a classical subtractive synthesiser - it consists of several "modules" for sound generation - VCO, NOISE GENERATOR - and treatment - VCF, VCA/DELAY, as well as "modules" that generate control and modulation signals to control them - ENVELOPE GENERATORS and SAMPLE & HOLD. The Bullfrog will not make the sound on its own unless it is patched - using eurorack patch cables to interconnect the "modules" or by inserting voice cards that create internal connections between the "modules" in a specific way and add extra functionality, like sampler/looper, sequencer, groovebox, etc. This approach better helps to understand functionality of a subtractive synthesizer and the principles of sound design with instruments like these.

In order to provide a well rounded understanding of the functionality of this synthesizer and sound synthesis in general, a comprehensive user manual is created to accompany the learning process.

Electronic music with its rich traditions and innate sense of exploration at core is ever popular, with artists and fans stretching around the globe. For me, one of the most exciting parts of creating electronic music is the playful exploration that leads one deep into their own imagination. Whether the intention to create completely imagined or real-life inspired sounds, the route one takes to create is always personal and often surprising. It is within these experiments where the beauty of synthesis really comes alive and which often unlocks a new sense of creativity and purpose.

Whether someone's experience with Bullfrog points them down a career in electronic music or not, the goal is to both nurture the love for electronically produced sounds and promote the accessibility of learning and understanding the basics of sound synthesis.

Erica Synths believe that the hands-on approach and problem solving that is innate to synthesis on a semi-modular synth like the Bullfrog, contains life lessons that go beyond what we can hear.

Bullfrog encapsulates the foundations of synthesis and is built with an immediate, intuitive design and a unique expandable architecture that grows and expands together with the user's imagination. This instrument feels at home anywhere - as an educational tool in music and physics classes, as an addition to your basement studio or even as a tool for performance on a stage.

What's included:

BULLFROG synthesizer
Universal 12VDC wall wart adapter
User manual
10 patch notes stencils
10 patch cables
3 pre-patched voice cards
3 DIY voice cards with adjustable offset
Delay effect with adjustable delay time and feedback amount
Two looping attack-sustain-release envelope generators (EG)
Sample & Hold circuit with an individual clock
Manual gate button
Voicecard slot
Built in speaker
DIN5 MIDI input
USB connector

What's included

BULLFROG synthesizer
Universal 12VDC wall wart adapter
User manual
10 patch notes stencils
10 patch cables
3 pre-patched voice cards
3 DIY voice cards

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


Inspired by Roland's TR-x0x sequencers, the Drum Sequencer brings that classic approach to Eurorack, offering a massive 16 trigger channels with gate and accent outputs, plus a CV/gate track for synths.

Supplier's notes:
X0X-style beat creation for modular systems - Erica's drum sequencer is based on the concepts of classic Roland TR rhythm composers. The module offers 16 trigger channels, twelve of which also feature accent outputs. Additionally, there is a CV and a gate track, meaning you can also notate a bass line or melody. The maximum pattern length is 64 steps. Extensive playback and random functions plus two LFOs help you with creating lively results. Large buttons provide a fantastic feel while programming patterns.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Up to eight voices of digitally synthesised drums, percussion and synth sounds from this versatile module, featuring virtual analogue models as well as FM and wavetable options.

Supplier's Notes:
Flame "Fire" percussion synth module

The module is a full 8-way polyphonic drum and percussion synthesizer. It offers different digital synthesis algorithms, which can be distributed over 8 channels. The sound engine delivers virtual analog sounds as well as different digital percussion sounds, which are generated with FM, wavetable or virtual analog synthesis. It is also possible to create sim- ple monophonic bass or synthesizer voices.

During development, particular attention was paid to direct and simple usability with regard to live operation. The hardware essentially consists of two parts (which are deli- vered together). On the one hand there is the basic module with all controls, the display, connections for MIDI, 2x CV inputs and 5 audio outputs.

There is also a separate XFIRE I/O extension with sockets for the 16 analog trigger/gate/CV inputs and 3 additional audio outputs. Both modules are connected via a 60cm long ribbon cable. In this way, the XFIRE module can be installed anywhere else in the rack. The base module is therefore only 22TE wide and can also work alone without the extension as a MIDI expander.

A maximum of 8 audio outputs are available. A stereo pair (outputs 7+8), plus 6 additio- nal individual direct outputs. All outputs are freely configurable. Two pages with settings for panorama and volume are available for the stereo main out.

There is a gate/trigger input and a configurable CV input for each channel. Two additio- nal programmable CV inputs can be used for further controls. Regardless of the analog connection, the module offers full MIDI functionality. Two MIDI inputs and a MIDI output/softthru allow integration into an external MIDI setup. The firmware can be upda- ted via MIDI Sysex. The created KIT data can also be saved or exchanged.

Notes: Building on the familiar dual VCO core arrangement of Carrier and Modulator, Mindphaser is a complex oscillator which departs from this bit of ancestral DNA with a modern toolkit focused on searing, phase-modulated leads, percussive basslines and other-worldly effects!

A diverse palette of intermodulation and harmonic experimentation is offered through the Modulation Bus, its unique Waveshaper and the dedicated Thru-zero Phase Modulation Bus. An intuitive interface provides colour-coded visual feedback and responsive indication while performing in dimly-lit environments.

Two precision analogue oscillator cores

Precision, wide-range V/oct ramp cores, each ranging from deep subsonic to supersonic frequencies (ramp cores, and not triangular, deliver the ideal waveforms for analogue phase accumulation in the TZ-PM Bus)
Each core generates fundamental waveshapes which interact and mangle one-another through the complex Modulation Bus and TZ-PM bus
Simultaneous waveform outputs for each base shape
Dedicated button to toggle between RAMP or SAW for each core, inverting the phase of the ramp output
V/oct, linear FM and exponential FM inputs which are all independent of the TZ-PM functionality. The Carrier's FM occurs inside the core itself, separate from the TZ-PM bus.
DC-coupled linear FM

Carrier

The heartbeat of Mindphaser, focused on audio-rate generation. Drives the WAVESHAPER and TZ-PM bus. This core's frequency range spans the audible spectrum.

- An external hard SYNC IN forcibly resets the core, useful for punchy sequences, percussive basslines and drum synthesis -- or to sync to another VCO.

- Coarse and fine controls conveniently span the audible spectrum. Ranges further with external CV.

Modulator

An extremely wide range oscillator, spanning from deep LFO frequencies all the way up to supersonic sound! Four base waveforms and diverse internal routing options form a versatile palette of modulations for the CARRIER to feed on.

- Activating hard SYNC on the Modulator locks its core to the Carrier's heartbeat. The effect can be dramatic. Try this while phase modulating!

- Octave RANGE switch lets you quickly flick up and down between octaves. All the way beyond audio-rate and LFO speed octaves. Perfect for experimenting with different PM sidebands and taming the wide frequency range of the Modulator.

- Manual PW (Pulse Width) control and dedicated CV input for PWM.

Waveshaper

This isn't a classic waveshaper! Developed anew from the ground up, this waveshaper is focused on deep harmonic experimentation and audio obliteration. Each waveshaper parameter is capable of being "turned up to 11".

FOLD up to 5 octaves above the fundamental Carrier frequency. A ceiling forms at maximum, imparting additional harmonics.

FEEDBACK the waveshaped and phase-modulated audio through a signal path internal to the waveshaper.

AMPLITUDE modulation spans thru-zero, allowing for full-range ring modulation effects with bipolar CV or audio signals.

CLIP the final stage of amplitude with the switch to introduce a last stage of harmonics before the complex signal exits through the final OUT.

Switchable inverting attenuators on each CV input, for quickly inverting the behaviour of your modulation. The indicator illuminates red to tell you the attenuator has been inverted.

Two distinct waveshaping modes

A press of the shape switch toggles Mindphaser between RAMPOID (green) and TRIANGULAR (yellow) waveshaping modes.

These modes have a remarkable effect on the behaviour of wavefolding and overall character of the final complex OUT, in addition to TZ-PM Bus character.

RAMPOID mode folds more asymmetrically, with raucous, buzzing harmonic artefacts as you sweep and introduce TZ-PM

TRIANGULAR mode folds more symmetric, splitting the complex sine wave at its peak centre of the waveform. TZ-PM character is less raucous, and more smooth.

TZ-PM Bus

Thru-zero phase modulation in the ANALOGUE realm! Unlike its digital counterpart, analogue TZ-PM has its own character we've come to expect from analogue circuitry!

A dedicated, voltage-controlled phase modulation bus completely separate from the Mod Bus
Modulator's SINE wave normalled to the PM SOURCE input
SOURCE input allows you to modulate phase with any signal you patch in
Dedicated voltage-controlled INDEX (amount)
Manual phase lets you zero in (or not!) on the base phase before introducing modulation
Independent of the Linear FM circuitry in the Carrier core

Mod Bus

The internal modulation powerhouse, normally fed by the Modulator core, but external signals are patchable as well.

Select from the PULSE, RAMP/SAW or SINE output of the MODULATOR, or inject your own SOURCE to the bus.

Voltage-controlled INDEX behaves like a macro control when combined with various amounts and polarities dialled in at each CV destination.

Internal sends include the Carrier's classic Linear FM, Amplitude, Feedback and TZ-PM Index, with variable amounts and polarities!

Modulator waveforms internally feeding the Mod Bus behave unipolarly, for predictable modulation of every Mod Bus destination, without external patching. By patching in one of the Modulator's bipolar waveform outputs manually (or any external signal), you can override this behaviour.

Dimensions
30 HP
24 mm deep

Current Draw
110 mA +12V
100 mA -12V

Notes: ***B-STOCK: Box opened, product in perfect working order***


Keyboard version of IK's three-oscillator, dual-filter analogue synth. Classy purist analogue tones with some nice modern features like a step sequencer and effects. Also available in a cheaper, capacitive keyboard version.

Supplier's Notes:
Next generation analog for everyone

UNO Synth Pro gives you the power to create nearly any analog synth sound you can imagine. With its unique dual-filter, 3-oscillator paraphonic design, 256 presets, 64-step sequencer, studio-grade effects, expanded connections and much more, UNO Synth Pro breaks new ground for music makers.

Available in two form factors to suit all players' needs- stage-ready with metal housing and premium keybed; or ultra-portable, USB-powered with capacitive keyboard- UNO Synth Pro offers everyone the next generation of analog sound design in a smart format that fits any space or budget.

3 analog oscillators offer continuously variable waveshape, including pulse-width modulation. Oscillators can be hard-synced for more harmonically-complex tones, and oscillator FM (frequency modulation) lets you shape everything from bell-like sounds to screaming industrial tones. UNO Synth Pro even includes ring modulation for wobbly, sci-fi sound, and a white noise generator for a wide range of percussive sounds and epic rises.

Recreate famous synth sound sources or forge entirely new ones - UNO Synth Pro has the tools you need.

In addition to the original UNO Synth's 2-pole OTA multimode filter, UNO Synth Pro adds a new 2/4-pole SSI LP filter with self-oscillation. The dual filters can be used in series or parallel, with invertible phase, for a total of 24 possible filter combinations.

In short, the UNO Synth Pro can recreate the filter sound of the most famous classic synths as well as deliver fresh new options to the limits of your imagination.

UNO Synth Pro offers 2 full ADSR envelopes, one dedicated to the filter and the other to amplitude, with both available as sources to modulate everything from oscillator pitch and waveshape to LFO speed or even other envelope stages.

2 LFOs (low-frequency oscillators) can create classic synth vibrato, wah and tremolo as well as do more complex modulations including audio range FM.

And a 16-slot modulation matrix makes routing all these a breeze. You can quickly and easily design even the most sophisticated modulation scheme, with both internal and external sources, including MIDI controllers.

IK's experience in modeling analog studio effects is decades long. For UNO Synth Pro, you'll find a super warm and organic true-analog overdrive, plus 12 studio-quality effects in three simultaneous slots: modulation, delay and reverb. External signals can also be routed through these effects, with pre-effects filtering for maximum flexibility.

UNO Synth Pro provides an enhanced version of the original's long-lasting capacitance-sensing keys along with pitch and mod strips for enhanced expression. And it adds firm-touch rubber pads for the control sections, plus LED-backlit indicators and an LED display for key information, making it easier than ever to use UNO Synth Pro live on stage or in deep programming sessions in the studio.

UNO Synth Pro offers 256 user-editable presets, each capturing the full state of the sound engine from oscillators to effects.

An onboard 64-step sequencer offers both step and real-time recording, with automation for up to 40 parameters, letting you create incredibly intricate and evolving soundscapes. You can even write CV and gate automation.

And a 10-mode arpeggiator makes it easy to create intricate patterns and runs plus a new "chord mode" that takes advantage of UNO Synth Pro's paraphonic design.

UNO Synth Pro offers two noiseless, balanced stereo outputs as well as headphone out, for superior audio quality in any situation.

USB and 5-pin DIN MIDI In and Out make it easy to integrate with other synths, Mac/PC and mobile devices, and its assignable CV/Gate connections lets UNO Synth Pro interact effortlessly with your Eurorack or other modular system.

And now, audio input allows access to the filter and FX section for external signals, in addition to the original thru-put for daisy-chaining multiple units together without using a mixer.

Free Editor

Free UNO Synth Pro Editor for Mac/PC and iPad now available for all purchasers to download. This gives you access to all the advanced features 'under the hood' to manage presets and to easily create your own directly from your computer. Full details on the editor here: https://www.ikmultimedia.com/products/unosynthpro/?p=editor

Software Promo
All purchasers of UNO Synth Pro can now claim 2 free software downloads from IK's SE or CE product range: AmpliTube 5, SampleTank

Dimensions:
Size (W x D x H): 55 x 30 x 7 cm, 21.65 x 11.8 x 2.75 in.
Enclosure: Metal/plastic
Weight: 5.8 kg, 12.8 lb
Power: Power PSU

Package includes:
UNO Synth Pro
1x Micro USB to USB Cable
Power Supply Unit

Notes: ***B-STOCK: Box damaged, missing documentation, product in perfect working order***


Keyboard version of IK's three-oscillator, dual-filter analogue synth. Classy purist analogue tones with some nice modern features like a step sequencer and effects. Also available in a cheaper, capacitive keyboard version.

Supplier's Notes:
Next generation analog for everyone

UNO Synth Pro gives you the power to create nearly any analog synth sound you can imagine. With its unique dual-filter, 3-oscillator paraphonic design, 256 presets, 64-step sequencer, studio-grade effects, expanded connections and much more, UNO Synth Pro breaks new ground for music makers.

Available in two form factors to suit all players' needs- stage-ready with metal housing and premium keybed; or ultra-portable, USB-powered with capacitive keyboard- UNO Synth Pro offers everyone the next generation of analog sound design in a smart format that fits any space or budget.

3 analog oscillators offer continuously variable waveshape, including pulse-width modulation. Oscillators can be hard-synced for more harmonically-complex tones, and oscillator FM (frequency modulation) lets you shape everything from bell-like sounds to screaming industrial tones. UNO Synth Pro even includes ring modulation for wobbly, sci-fi sound, and a white noise generator for a wide range of percussive sounds and epic rises.

Recreate famous synth sound sources or forge entirely new ones - UNO Synth Pro has the tools you need.

In addition to the original UNO Synth's 2-pole OTA multimode filter, UNO Synth Pro adds a new 2/4-pole SSI LP filter with self-oscillation. The dual filters can be used in series or parallel, with invertible phase, for a total of 24 possible filter combinations.

In short, the UNO Synth Pro can recreate the filter sound of the most famous classic synths as well as deliver fresh new options to the limits of your imagination.

UNO Synth Pro offers 2 full ADSR envelopes, one dedicated to the filter and the other to amplitude, with both available as sources to modulate everything from oscillator pitch and waveshape to LFO speed or even other envelope stages.

2 LFOs (low-frequency oscillators) can create classic synth vibrato, wah and tremolo as well as do more complex modulations including audio range FM.

And a 16-slot modulation matrix makes routing all these a breeze. You can quickly and easily design even the most sophisticated modulation scheme, with both internal and external sources, including MIDI controllers.

IK's experience in modeling analog studio effects is decades long. For UNO Synth Pro, you'll find a super warm and organic true-analog overdrive, plus 12 studio-quality effects in three simultaneous slots: modulation, delay and reverb. External signals can also be routed through these effects, with pre-effects filtering for maximum flexibility.

UNO Synth Pro provides an enhanced version of the original's long-lasting capacitance-sensing keys along with pitch and mod strips for enhanced expression. And it adds firm-touch rubber pads for the control sections, plus LED-backlit indicators and an LED display for key information, making it easier than ever to use UNO Synth Pro live on stage or in deep programming sessions in the studio.

UNO Synth Pro offers 256 user-editable presets, each capturing the full state of the sound engine from oscillators to effects.

An onboard 64-step sequencer offers both step and real-time recording, with automation for up to 40 parameters, letting you create incredibly intricate and evolving soundscapes. You can even write CV and gate automation.

And a 10-mode arpeggiator makes it easy to create intricate patterns and runs plus a new "chord mode" that takes advantage of UNO Synth Pro's paraphonic design.

UNO Synth Pro offers two noiseless, balanced stereo outputs as well as headphone out, for superior audio quality in any situation.

USB and 5-pin DIN MIDI In and Out make it easy to integrate with other synths, Mac/PC and mobile devices, and its assignable CV/Gate connections lets UNO Synth Pro interact effortlessly with your Eurorack or other modular system.

And now, audio input allows access to the filter and FX section for external signals, in addition to the original thru-put for daisy-chaining multiple units together without using a mixer.

Free Editor

Free UNO Synth Pro Editor for Mac/PC and iPad now available for all purchasers to download. This gives you access to all the advanced features 'under the hood' to manage presets and to easily create your own directly from your computer. Full details on the editor here: https://www.ikmultimedia.com/products/unosynthpro/?p=editor

Software Promo
All purchasers of UNO Synth Pro can now claim 2 free software downloads from IK's SE or CE product range: AmpliTube 5, SampleTank

Dimensions:
Size (W x D x H): 55 x 30 x 7 cm, 21.65 x 11.8 x 2.75 in.
Enclosure: Metal/plastic
Weight: 5.8 kg, 12.8 lb
Power: Power PSU

Package includes:
UNO Synth Pro
1x Micro USB to USB Cable
Power Supply Unit

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Flagship model in IK's Uno Synth range, the Pro X adds extra synth power to the three-oscillator analogue design, with plenty of hands-on control and sequencing power.

Supplier's Notes:
Freedom of sound

Paraphonic dual filter analogue synthesiser

Embark on a liberating sonic adventure with UNO Synth PRO X, a powerful analogue synthesizer that'll ignite your creativity and elevate your music to new dimensions. Prepare to be inspired as you explore a world of infinite possibilities, where technology meets the timeless allure of analogue warmth.

Get creative

Featuring three discrete wave-morphing oscillators, the UNO Synth PRO X invites you to explore a vast sonic landscape. Unleash your imagination with PWM, sync, FM, and ring modulation capabilities: Your sonic palette knows no bounds.

Unrivalled sound sculpting

Discover a new realm of sonic possibilities with the UNO Synth PRO X's dual-filter design, combining classic OTA and SSI-chip-based filters. Immerse yourself in the moment as you weave intricate textures and shape your sound to perfection. Dive deeper into sonic exploration with the 16-slot modulation matrix enabling you to create intricate and evolving textures.

Sound connection

Take complete control over your music with over 30 hands-on controls, providing immediate access to your sound-shaping tools. With USB, MIDI, CV and Gate in/out options, integrating the UNO Synth PRO X into your setup is effortless.

4 kinds of effects

With 10 studio-quality FX in three slots and an analogue drive, your music will further come to life with warmth and character.

3 effects slots + analogue drive
Vintage chorus and uni-vibe
5 different delays
Hall, plate and shimmer reverbs

From sequencing to arranging

Unleash your creative potential, easily creating complex ever-evolving sequences. Try the 10-mode arpeggiator, equipped with a pattern designer to bring your melodies to life. New horizons are just around the corner with the Bassline mode, along with legato, mono and paraphonic modes, offering unprecedented expression of your musical ideas.

Advanced paraphonic 64-step sequencer
Per-step parameter recording with up to 48 parameters
Sequence randomizer that follows the scale you select
Parameter automation per step and real-time
10-mode arpeggiator with pattern designer
New Bassline mode plus legato, mono and paraphonic modes

Seamless DAW integration

With 256 user-editable presets the UNO Synth PRO X is a playground for sonic fun and exploration. Effortlessly sculpt save and recall your own custom sounds recapturing every moment of your creativity. And with the included Editor/Librarian software providing seamless control from your Mac or PC anything becomes possible. The Editor works as both a standalone application and as a plug-in inside your favourite DAW. This means you can program and play the UNO Synth PRO X just like a virtual instrument.

Designed for portability
The UNO Synth PRO X is not only a fun sound-design partner but also the perfect musical companion on the go, adapting to any environment. From backpack to mainstage, new sonic destinations will always be within reach.
Ultralight and ultraportable
PSU or USB battery pack power supply
Balanced stereo and headphone outputs

Custom travel bag available

Whether you're a seasoned sound designer or on the way to becoming one, UNO Synth PRO X is here to travel physically and sonically wherever you go.

UNO Synth PRO X Specifications

Sound generation
3 discrete wave-morphing oscillators
3 super-fast envelopes with loop and retrigger options
PWM, sync, FM and ring modulation
Dual-filter design, OTA and SSI-chip based
12 studio-quality FX in 3 slots + analogue drive

Performance tools
Advanced paraphonic 64-step sequencer
10-mode arpeggiator with pattern designer
New Bassline mode plus legato, mono, paraphonic
Audio input to filters and FXs or pass-through

Complete controls
Over 30 hands-on controls
16-slot modulation matrix
256 user editable presets
USB / MIDI / CV / Gate in/out
Backlight control and onboard factory preset restore
Advanced software control for Mac/PC

Ready for travel
Ultralight and ultraportable
PSU or USB battery pack power supply
Balanced stereo and headphone outputs
Editor/Librarian included
Optional gig bag available

Dimensions
Size (W x D x H): 33.3 x 15 x 5 cm, 13.11 x 5.91 x 1.96 in.
Enclosure: Plastic
Weight: 800 g, 1.76 lb
Power: iRig PSU-3A (included) or USB (5V/1.5A, 7.5W or above)

Package includes
UNO Synth PRO X
1x USB-C to USB-C Cable - 60 cm, 23.6 in.
Power Supply Unit
Quick start guide
Registration card

NOTE: USB power has inherent ground noise, so when connecting the UNO Synth directly to your computer via USB, you may hear more noise and interference than when the synth is connected to a USB wall charger or running via batteries. With the direct computer connection, you can reduce the USB ground noise and other interference by either using a USB isolator or a custom TRS cable into a balanced input on your preamp or audio interface where the ground is not connected at the balanced input side.

UNO Synth Pro Editor Compatibility

Computers
64-bit application. Requires a 64 bit CPU and Operating System.

Macr (64-bits)
Minimal: macOS 10.15 or later.

Windowsr (64-bits)
Minimal: Windows 8 or late

Notes: ***B-STOCK: Box opened, product in excellent condition, no original internal packaging***


Intellijel has made the already awesome Thru Zero VCO Rubicon even better! In addition to the seven waveforms plus sub-oscillator of the first version, the second generation offers a new Warp stage, which generates a hybrid of complex pulse and other waves - you can even use external audio material. In order to keep results in the range of 10 Vpp, there is a wave folder called Squish. On top, the FM capabilities were expanded.

Notes: Fire-themed version of the expressive J-Play Pack from Joue. Based around the idea of making music more organic and natural, the Play Pads transform the J-Play's behaviour, allowing you to control and perform in a range of ways.

Supplier's Notes:
The J-Play transforms your musical experience with a complete system combining an expressive multi-instrument, an intuitive application and interactive content to practice.

A unique playing experience

The J-Play instrument merges the quality of traditional musical instruments with the technology of the digital world. It is sensitive to natural gestures for unparalleled expressivity. It is also a modular instrument, once placed on the J-Play Board, the interchangeable Play Pads instantly transform the instrument into a guitar, keyboard, drums, xylophone or vocal effects station. Each pad has its own bank of instruments. Explore different musical styles and experiment with new sounds thanks to the integrated effects!

With you, everywhere you go, the design of the J-Play has been thought out to adapt to all playing styles. Compact and lightweight, it slips easily into a backpack and follows you on the go. Don't let any musical idea slip away!

Intuitive & powerful app

Create, modify and share your songs in an intuitive way thanks to the included application. No need to spend hours on overly complex music software anymore, the Joue Play application guides you step by step through the process of creating music to make it intuitive. The app has been designed as a simplified music creation software: making music is easy and fun!

The Joue Play app is freely available for Windows, macOS, iPadOS and very soon for iPhone (before end of 2023).

Exclusive content

Practice at your own pace and recreate your favourite songs: each week, a new playable cover track is added to the large collection of well-known covers already available in the J-app. Replay the rhythms of your favourite artists, and get creative by remixing them. Change the sounds, the tempo or add your own rhythms!

Grow with it

The perfect instrument for beginners, a great first step into digital music making for musicians but also a powerful MPE MIDI controller for advanced music producers. The J-Play will always suit your style in accordance with your skills and needs. Discover a whole new way to control your software. Combine all your controllers into one device that will always be at hand in your studio or on stage.

1 wooden board
5 Play Pads (Fire): guitar, piano, drum, audio, keys
USB-C to USB-C cable
Storage bag
J-App included with dedicated tutorials and sound banks

(!) If you want to use your J-Play with an iPad, make sure the port type. USB-C to lightning adapters are available as accessories.

Notes: The Haible VC Resonator is an evolution of Jurgen Haible's Resonator which was inspired by the Polymoog Resonator. As Jurgen stated: The Polymoog, an early polyphonic synthesizer, featured a 3-band "Resonator" section that allows Formant-Filtering in addition to its dynamic Filters. Such a Resonator is a very useful feature for analogue synthesizers. Each of the three (now overlapping) filter bands has a control for frequency, signal gain, and emphasis (resonance). The VC Resonator now not only adds VC control for each band, but also extends the ranges whithin which each frequency band can be set - adjacent bands can now overlap or even cross over, for instance the LOW and MED bands can now be set (or moved!) so that the LOW center frequency is higher than the MED frequency.

Jurgen's original Resonator (like the Polymoog) had a switch to select one of 3 basic modes, i.e. only one mode could be used at a time. The Haible VC Resonator now provids the same 3 modes as separate outputs so they can be used simultanously, e.g. for further processing like crossfading.

Some details of the Haible VC Resonator:

Evolution of Jurgen Haible's design
Added Voltage Control for Filter bands
Extended range of each band (overlapping)
Three separate outputs
Burr-Brown op-amps and high-end VCAs
Eurorack (3U) format, 18 hp
Skiff-friendly: < 30mm deep
Power: appr. 60mA @ +12V and 60mA @ -12V

Notes: Mûmack is built from a temperature-stabilized analog source producing the three classic waveforms: triangle, saw, rectangle. This basic signal can be altered or enriched in several ways, which can be combined with each other, and associated with one VCA per mode.

Peak Compressor:
In the central position the signal is not modified. Turning the potentiometer to the right or to the left will compress the signal positively or negatively. It is this signal that will then feed Usual, Mûm and Hack. An LFO is dedicated to the compressor, controllable in speed and amplitude. A CV input with attenuator can also control the compressor.

USUAL:
The three waveforms are freely mixable, a CV input and a potentiometer can change the shape of the rectangle wave (PWM). The compressor intervening upstream, it can strongly influence the final form and the amplitude of USUAL. This produces complex analog waveforms, moving in time with the LFO or the CV input. The linear potentiometer makes it possible to mix the signal with the others, and to dose the volume of the direct output. The rotary potentiometer acts as an attenuator for the VCA input.

MÛM:
The Waveform potentiometer move the waveform of Mûm continuously from a attenuated triangle to a more pronounced triangle, then to a sinusoid and finally to a square wave. An LFO allows you to add a vibrato adjustable in speed and amplitude. The linear potentiometer makes it possible to mix the signal with the others, and to dose the volume of the direct output. The rotary potentiometer acts as an attenuator for the VCA input.

HACK:
Mûm's signal is taken up in a Wavefolder + compressor. Depending on the settings of the Peak compressor, and the three LFOs, we obtain complex, moving, organic waveforms. Again the linear potentiometer allows to mix the signal with the others, and to adjust the volume of the direct output. The rotary potentiometer acts as an attenuator for the VCA input.

ALL:
The three channel (Usual, Mûm, Hack) are mixed and brought together in a single output. The output volume is adjustable and a CV input with attenuator works like a VCA.

MIXER & VCA
The voltages produced by Mûmack, as is the case with many analog VCOs, can be high. The mixer allows them to be attenuated if necessary. Each of the three channels, and the product of the three, can be controlled by the VCA, with attenuator. The VCA is designed to add distortion at high values. The mixer is exponential for more subtle adjustments in low values.

Dimensions
30 HP
40 mm deep

Current Draw
155 mA +12V
155 mA -12V
0 mA 5V

Notes: Skippy is a matrix and non-matrix polyrhythmic sequencer (linear and logarithmic) which offers four completely independent tracks with a very simple interface: one button per track, one function per screen, no sub-menus.

Possible saving of 64 configurations.

Internal connection with expander module (coming soon) and with Zazou, generative composition module (coming end of 2023).

Functions per track

- BPM (10 to 400)
- Number of steps (1 to 64)
- Linear or log
- Random function
- Chaotic function
- Direction: clockwise, counterclockwise, ping-pong, pause
- Number of steps before the start of the sequence
- Number of steps before the end of the sequence
- Gate duration

Specific algorithms

- Euclidean (Bjorklund)
- Matrix Patterns
- microtiming patterns
- matrix rotation

Clock

- External clock input or Reset
- Clock output
- 1/1, 1/4, etc.

Menus

- BPM
- STEP
- BEGIN
- END
- GATES
- PROBA
- CHAOS
- WAY
- SWING
- GAUSS
- EUCLID
- TILES
- POLYR
- JAZZY
- SPIN
- PAUSE
- RESET
- SYS: save, load, new, clk/rst, clk

Tech Specs

Width: 10 HP
Depth: 32 mm

Current Draw:
+12 V 0 mA
-12 V 0 mA

Notes: Combining the power of multi-oscillator wavetable synthesis with the percussive detail of sampled sounds, Pianophonic is a powerful hybrid synth engine featuring 8 voices of polyphony. Not limited to Piano sounds, the voice architecture of Pianophonic is extremely versatile and easy to use with the essential controls laid bare on the front panel, and the most significant CV inputs and outputs provided for full integration within eurorack patches.

Taking its inspiration from the wavetable/sampler keyboards of the 90s, Pianophonic revisits a lean and mean approach to digital sound creation but instead with 24bit 48Khz quality and fingertip control of the parameters that really matter.

With a built in SD card and an online re-synthesise utility, allowing users to create their own sound banks, the possibilities for sound exploration are limitless.

Notes: Two decades in the game and the mighty MicroKorg remains a classic. Crystal version celebrates the anniversary with a fresh new look and the same punchy sound.

Supplier's Notes:
A shining homage to two decades of microKORG legacy

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio.

The instruments that musicians recognise as "classics" are those that are loved and always in use, regardless of times and trends. The word "classic" symbolises musical instruments that are revolutionary in their field. There may be imitations of a classic, but the distinct character of the original shines more brilliantly and is only enhanced by time.

Two decades ago, the portable, battery powered microKORG was born with a radical new micro-keybed, a powerful Vocoder and ready-to-use sounds ideal for contemporary genres delivering countless hit performances, and instantly revolutionising the way musicians played. This compact sound monster introduced synthesis to a vast number of non-keyboard playing musicians and created a way of making music we now take for granted: a small keyboard resting unassumingly atop a larger one onstage, made for use by hobbyists and pros alike and finding itself front and centre of studios worldwide from the smallest bedroom to the largest pro recording facility.

To celebrate the 20th anniversary of its release, the special edition microKORG Crystal offers a unique and stunningly stylish take on this beloved synth - now a classic in its own right.

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio. microKORG Crystal is the ultimate reincarnation of this iconic synth.

"Skeleton" type semi-translucent chassis, with matching knobs and controls

Previously unchanged, the microKORG Crystal features a new take on the structure of the microKORG, with a semi-translucent chassis that lets you see the electronics and internals. Even the controllers are semi-transparent, including the knobs, dials and wheels. As a commemorative model, the microKORG Crystal is great fun to look at from any angle, and as its name suggests, it "crystalizes" the energy and feelings of the KORG team behind its birth.

A panel with a beautiful sheen

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Aluminium side panels for a sturdy feel

The original microKORG featured wooden side panels that suggested a retro feel, serving as an elegant accent to the analogue modelled synth engine. This new special microKORG features sleek aluminium side panels for a clean and depurated look.

Dedicated transparent carry bag

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Specifications

Sound generation:
Analogue Modelling Synthesis System

Synthesizer program:
Multi Timbral: 2 (max, Split/Dual Mode)

Voices: 4 voices

Sound source:
2 Oscillator + Noise Generator
Multi Mode Filter (-24dB/octLPF,-12dB/oct LPF/BPF/HPF)
EG×2
LFO×2
Virtual Patch×4

Voices: 4 voices

Vocoder program

Voices: 4 voices

Sound source:
1 Oscillator +Noise Generator
EG×1
LFO×2 8
Channels vocoder
Level and pan of each channel can be edited
Formant Shift function

Programs: 128
Effects: Modulation effects (3 types), Delay (3 types), Equalizer
Arpeggiator: 6 types

Controllers
Real-Time control knob X 4 (3 level Selection),
Arpeggio ON/OFF

Keyboard: 37 Keys (mini-keyboard, keyboard has velocity)
Inputs: AUDIO IN 1,2, Level switch LINE/MIC, [AUDIO IN 1, 2 (LINE) ], [AUDIO IN 2 (MIC)]
Outputs: L/MONO, R, Headphones
MIDI : IN, OUT, THRU
Display : 3 characters×1 line with 8 segment LED
Power supply: DC 9V (AC adapter)
Power: 6.4w Max
Dimensions: 524 x 232 x 70mm
Weight: 2.4 kg (instrument only, without batteries or microphone)
Included items: AC adapter, condenser microphone, dedicated transparent carry bag

Notes: ***B-STOCK: Box opened, product in perfect working order***


Two decades in the game and the mighty MicroKorg remains a classic. Crystal version celebrates the anniversary with a fresh new look and the same punchy sound.

Supplier's Notes:
A shining homage to two decades of microKORG legacy

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio.

The instruments that musicians recognise as "classics" are those that are loved and always in use, regardless of times and trends. The word "classic" symbolises musical instruments that are revolutionary in their field. There may be imitations of a classic, but the distinct character of the original shines more brilliantly and is only enhanced by time.

Two decades ago, the portable, battery powered microKORG was born with a radical new micro-keybed, a powerful Vocoder and ready-to-use sounds ideal for contemporary genres delivering countless hit performances, and instantly revolutionising the way musicians played. This compact sound monster introduced synthesis to a vast number of non-keyboard playing musicians and created a way of making music we now take for granted: a small keyboard resting unassumingly atop a larger one onstage, made for use by hobbyists and pros alike and finding itself front and centre of studios worldwide from the smallest bedroom to the largest pro recording facility.

To celebrate the 20th anniversary of its release, the special edition microKORG Crystal offers a unique and stunningly stylish take on this beloved synth - now a classic in its own right.

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio. microKORG Crystal is the ultimate reincarnation of this iconic synth.

"Skeleton" type semi-translucent chassis, with matching knobs and controls

Previously unchanged, the microKORG Crystal features a new take on the structure of the microKORG, with a semi-translucent chassis that lets you see the electronics and internals. Even the controllers are semi-transparent, including the knobs, dials and wheels. As a commemorative model, the microKORG Crystal is great fun to look at from any angle, and as its name suggests, it "crystalizes" the energy and feelings of the KORG team behind its birth.

A panel with a beautiful sheen

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Aluminium side panels for a sturdy feel

The original microKORG featured wooden side panels that suggested a retro feel, serving as an elegant accent to the analogue modelled synth engine. This new special microKORG features sleek aluminium side panels for a clean and depurated look.

Dedicated transparent carry bag

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Specifications

Sound generation:
Analogue Modelling Synthesis System

Synthesizer program:
Multi Timbral: 2 (max, Split/Dual Mode)

Voices: 4 voices

Sound source:
2 Oscillator + Noise Generator
Multi Mode Filter (-24dB/octLPF,-12dB/oct LPF/BPF/HPF)
EG×2
LFO×2
Virtual Patch×4

Voices: 4 voices

Vocoder program

Voices: 4 voices

Sound source:
1 Oscillator +Noise Generator
EG×1
LFO×2 8
Channels vocoder
Level and pan of each channel can be edited
Formant Shift function

Programs: 128
Effects: Modulation effects (3 types), Delay (3 types), Equalizer
Arpeggiator: 6 types

Controllers
Real-Time control knob X 4 (3 level Selection),
Arpeggio ON/OFF

Keyboard: 37 Keys (mini-keyboard, keyboard has velocity)
Inputs: AUDIO IN 1,2, Level switch LINE/MIC, [AUDIO IN 1, 2 (LINE) ], [AUDIO IN 2 (MIC)]
Outputs: L/MONO, R, Headphones
MIDI : IN, OUT, THRU
Display : 3 characters×1 line with 8 segment LED
Power supply: DC 9V (AC adapter)
Power: 6.4w Max
Dimensions: 524 x 232 x 70mm
Weight: 2.4 kg (instrument only, without batteries or microphone)
Included items: AC adapter, condenser microphone, dedicated transparent carry bag

Notes: ProFX10v3+ is a compact analogue mixer and USB-C audio interface with features from a studio recording console. Equipped with essentials including one-knob compression, EQ, Hi-Z switches and 100 Hz low-cut filters, it's the perfect centrepiece for your studio.

Mackie ProFXv3+ Series is a professional analogue mixer and USB-C audio interface with powerful enhancements for studio-quality recordings and live streams. Capture your performance with Onyx preamps and channel EQ, add computer audio via loopback, bring in calls via Bluetoothr and enhance your sound with upgraded GigFX+ effects on a colour LCD screen.

With up to 60 dB of gain and ultra-low noise, ProFXv3+ series mixers allow you to sound better than ever. Record podcasts, stream gameplay or produce the next hit-all with ultra-clean, transparent audio. The award-winning Onyx Mic Preamps deliver analogue warmth so you sound great, no matter what you do.

Enhance your sound using high-resolution GigFX+ effects, with 12 presets you can edit and save on the fly via the full-size LCD screen. Combining the warmth of an analogue recording console with precise digital effects, ProFXxv3+ is an ideal mixer for home studios and live events alike.

Capture your stream or performance at pristine 24-bit / 192 kHz quality with a built-in 2x4 USB-C audio interface, complete with three recording modes: Standard for the full mix with effects, Loopback to include computer audio with mixer signal for streaming, and Interface to record channel 1-2 without effects processing.

Use the dedicated Bluetooth channel to send and receive audio from devices like smartphones and tablets. For podcasters, it's an effortless way to bring in phone calls. For musicians and performers, it's the easiest option for streaming outside music and backing tracks.

Features:

4 Onyx mic pres with up to 60 dB of gain and ultra-low noise performance
High-resolution GigFX+ effects engine
Full-colour LCD display for editing and saving effects presets
24-Bit / 192 kHz 2x4 USB-C audio interface
Three recording modes: Standard, Loopback and Interface
Bi-directional Bluetooth for music playback and caller integration
3-band EQ on all channels
One-knob compression on channels 1 and 2
Hi-Z switches allow direct connection of instruments
100 Hz low-cut filter and 48V phantom power on all mic channels
Stereo 1/8" input on channel 9/10
Headphone output with separate level and blend control
Easily blend between monitoring your computer output and a latency-free feed from the mixer
Waveform OEM recording software Included
Legendary Built-Like-A-Tank design
Solid steel chassis
Tough ABS side protection

Line inputs: 10
Mic inputs: 4
Aux sends: N/A
Subgroups: 2
Compressors: 4
Effects: GigFX+
USB I/O: 2x4
USB Type: C
Recording modes: Yes
Bluetooth w/MixMinus: Yes

Notes: Part of Mackie's excellent ProFX series, the 12v3+ combines a 12-channel analogue mixer with built-in USB audio interface for quality recordings. Includes GigFX+ digital effects, colour LCD screen and Bluetooth input.

Supplier's Notes:
12-channel professional analogue mixer and USB-C audio interface with powerful enhancements for studio-quality recordings and live streams. Capture your performance with award-winning Onyx preamps, channel EQ and analogue compression. Upgraded GigFX+ effects enhance your sound, plus you can edit and save your presets on the fly via the full-colour display. Switch between recording modes to track dry or include the FX, or use loopback mode to stream video games or perform over backing tracks without feedback. You can even bring in podcast guests over the phone via Bluetooth on a dedicated channel. With easy connectivity, the warmth of analogue and an upgraded FX engine, Mackie ProFX12v3+ is the perfect centrepiece for your studio.

Mackie ProFXv3+ Series is a professional analogue mixer and USB-C audio interface with powerful enhancements for studio-quality recordings and live streams. Capture your performance with Onyx preamps and channel EQ, add computer audio via loopback, bring in calls via Bluetoothr and enhance your sound with upgraded GigFX+ effects on a colour LCD screen.

With up to 60 dB of gain and ultra-low noise, ProFXv3+ series mixers allow you to sound better than ever. Record podcasts, stream gameplay or produce the next hit-all with ultra-clean, transparent audio. Our award-winning Onyx Mic Preamps deliver analogue warmth so you sound great, no matter what you do.

Enhance your sound using high-resolution GigFX+ effects, with 12 presets you can edit and save on the fly via the full-size LCD screen. Combining the warmth of an analogue recording console with precise digital effects, ProFXxv3+ is an ideal mixer for home studios and live events alike.

Capture your stream or performance at pristine 24-bit / 192 kHz quality with a built-in 2x4 USB-C audio interface, complete with three recording modes: Standard for the full mix with effects, Loopback to include computer audio with mixer signal for streaming, and Interface to record channel 1-2 without effects processing.

Use the dedicated Bluetooth channel to send and receive audio from devices like smartphones and tablets. For podcasters, it's an effortless way to bring in phone calls. For musicians and performers, it's the easiest option for streaming outside music and backing tracks.

Features

7 Onyx mic pres with up to 60 dB of gain and ultra-low noise performance
High-resolution GigFX+ effects engine
Full-colour LCD display for editing and saving effects presets
24-Bit / 192 kHz 2x4 USB-C audio interface
Three recording modes: Standard, Loopback and Interface
Bi-directional Bluetoothr for music playback and caller integration
3-band EQ on all channels
One-knob compression on channels 1-4
Hi-Z switches allow direct connection of instruments
100 Hz low-cut filter and 48V phantom power on all mic channels
Stereo 1/8" input on channel 11/12
Separate FX, monitor and subgroup busses
Headphone output with separate level and blend control
Easily blend between monitoring your computer output and a latency-free feed from the mixer
Waveform OEM recording software Included
Legendary Built-Like-A-Tank design
Solid steel chassis
Tough ABS side protection

Line Inputs: 12
Mic Inputs: 7
Aux Sends: 1
Subgroups: 2
Compressors: 4
Effects: GigFX+
USB I/O: 2x4
USB Type: C
Recording Modes: Yes
Bluetooth w/MixMinus: Yes

Notes: Sixteen Seconds Delay vintage eurorack version, inspired by the original looping delay from 1983.

The device topology is the same as first digital delays from that era, with an all-analogue signal path, pre emphasis and de-emphasis, compression and expansion, antialias and reconstruction filtering and input output buffering and mixing.

Digital processing is limited only to analogue to digital conversion, memory management and storage and digital to analogue conversion, all in glorious eight bits.

There's also an analogue triangle Low Frequency Oscillator for modulating delay time/pitch Maximum delay time has been increased to 32 seconds, there are toggle switches for slow/fast speed/pitch , freeze function and reverse playback.

On board modular inputs for CV control of sample rate, infinite/freeze, reverse, slow/fast, reverse, delay line retrigger for sync and stutter experimentation.

Slider illuminated controls are delay time coarse, delay time fine, sweep rate and depth, feedback and mix.

Proudly hand built in Uruguay, by Maneco Labs also creators for the Grone Drone machine Eurorack, Tabletop and Pedal drone generators among others.

Notes: Fuzz meets synth meets reverb in this clever pedal. Built-in drone VCO, noise generator, LFO and effects allow you to warp and twist input signals into completely new tones and textures.

Supplier's Notes:
Grone 2 Dark Drone machine Pedal Version

Blocks description

Drone VCO:

Generates sound based on equations converted to analogue signals, there are sixteen equations selected by algorithm up pot. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0, A1 and A2, fourth pot Sample Rate controls pitch and speed of the oscillation. There's an expression jack input, EXP2 for controlling sampling rate.

NOISE GENERATOR: White noise with noise level pot.

Voltage Controlled Filter: MS20 resonant low pass filter, with CUT frequency pot control, RESONANCE, MODULATION 1 amount pot, Expression jack input 1 controls filter cuttoff.

LFO1: Low frequency oscillator routed to MOD1 from VCF, RATE and WAVEFORM shape Pots.

Waveforms are: ramp up, ramp down, square, triangle, sine, sweep, random levels, random slopes

FUZZ Section: gain stage that affects input signal, with controls for input gain and level.

Effects Section: Consists of a chorused reverb with delay, adding octave up or down component, with freeze function

Pots controls:
1-Blend controls mix of effects over final output signal
2-Octave blends mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component
5-Balance controls mixture from reverb and delay.
6-Pitch controls the sampling rate of the whole effects section, modifying delay time and reverb decay.

Footswitches:
1- Synth: mutes or enables the drone VCO and noise generator
2-Filter: Bypass for the VCF
3-Fuzz: Bypass for the fuzz that processes the input signal.
4-reverb: Bypass for the reverb/delay section
5-Freeze: toggles freeze function for reverb section

Jacks:
Input, Expression 1 input (VCF) Expression 2 (VCO sample rate), Output

Notes: Proper futuristic amp modelling and effects courtesy of Mooer's next-level GE1000, featuring AI-driven auto-EQ and a five-inch touchscreen. Hook up to the GE Cloud app to edit and share sounds.

Supplier's Notes:
MOOER has consistently pleased the guitar pedal market with its GE multi-effect range, and its latest addition, the GE1000, is set to be no exception. The GE1000, built with a futuristic and sleek "Walking Star" design, builds upon past GE products, offering an even larger range of guitar processing effects, preamps, amp simulators, and features than previous entries.

The GE1000 comes preloaded with an impressive bank of guitar effects and amp simulations, but this is augmented further through MNRS GE Cloud support. MOOER's MNRS files consist of IR samples from real amplifiers, facilitating authentic feeling tones that can be downloaded, uploaded, and shared via MOOER's 'GE Cloud' app for free. The GE1000 also supports third-party IR files of up to 2048 sample points, enabling further expansion of the pedal's portfolio of amp simulators.

Further adding to the GE1000's impressive amplification and tone features, the GE1000 includes a cutting-edge AI-driven automatic equalizer, a first for MOOER. This automatically adjusts a 5-band EQ based on the user's playing and music style choice, providing further possibilities for creativity whilst still providing the flexibility of a manual-controlled EQ interface.

MOOER hasn't only focused on tone and pitch with the GE1000 exclusively, which is illustrated perfectly by the integrated Groove Station rhythmic toolkit, consisting of a style-specific drum machine and a looper. These features have been designed to work both independently and in tempo synchronization, making them adaptable for all types of jam. The looper even includes automated record and count-in functions, activating the loop recording when an input signal is detected, providing a unique hands-free looping experience.

MOOER has always excelled at providing innovative UI experiences, and the GE1000 is set to continue this trend. The pedal features a 5-inch high-quality coloured touch screen designed for intuitive multi-effect workflows while keeping some fan favourites from previous GE pedals. These include the signature MOOER multi-purpose control dials, buttons, and a quick-access expression pedal.

Additional flexibility can be found within the pedal's cutting-edge control systems, including programmable MIDI ports, bundled preset management software, and compatibility with the MOOER mobile app.

This level of flexibility is matched by the pedal's audio routing solutions, which feature Bluetooth playback, USB audio interfacing, serial and parallel TRS stereo FX LOOP compatibility, and industry-standard input and output ports.

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Proudly digital oscillator inspired by the last millennium on a swappable oscillator platform.

Ataraxic Iteritas Alia is a voltage-controlled and proudly digital oscillator based roughly on the original Ataraxic Translatron. Now brought to the Alia platform and beefed up with a suboscillator and performable hold button, it's back and ready to make some killer basslines or glitchy madness. Sound starts with waveshaped bit tables that are amplitude modulated, folded, and distorted by the CV-controllable front panel controls. Ataraxic is ripe for sound design and exploration: a wide range of bright, digital timbres are readily available, and tuning below audio rates creates wonderfully unexpected textures. Guaranteed to make the fax machine jealous.

AIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Ataraxic Iteritas Alia

Proudly digital oscillator inspired by the last millennium on a swappable oscillator platform

Ataraxic Iteritas Alia is a voltage-controlled and proudly digital oscillator based roughly on the original Ataraxic Translatron. Now brought to the Alia platform and beefed up with a suboscillator and performable hold button, it's back and ready to make some killer basslines or glitchy madness. Sound starts with waveshaped bit tables that are amplitude modulated, folded, and distorted by the CV-controllable front panel controls. Ataraxic is ripe for sound design and exploration: a wide range of bright, digital timbres are readily available, and tuning below audio rates creates wonderfully unexpected textures. Guaranteed to make the fax machine jealous.

AIA is available on our 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Cursus Iteritas Alia

Dynamically generated wavetable oscillator using orthogonal functions on a swappable oscillator platform

Cursus Iteritas Alia is Noise Engineering's take on a wavetable-inspired additive oscillator. Cursus creates sounds from a dynamically generated wavetable, then gives the user spectral controls to sculpt and modulate. Cursus has three different algorithms, based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. All that math is hidden behind a set of friendly controls that produces an extremely wide variety of harmonic sounds, perfect for melodic sound design. Cursus has long been regarded as the gentlest Iteritas, but if you need some beef and extra low end, try mixing the suboscillator output into your patch.

CIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Cursus Iteritas Alia

Dynamically generated wavetable oscillator using orthogonal functions on a swappable oscillator platform

Cursus Iteritas Alia is Noise Engineering's take on a wavetable-inspired additive oscillator. Cursus creates sounds from a dynamically generated wavetable, then gives the user spectral controls to sculpt and modulate. Cursus has three different algorithms, based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. All that math is hidden behind a set of friendly controls that produces an extremely wide variety of harmonic sounds, perfect for melodic sound design. Cursus has long been regarded as the gentlest Iteritas, but if you need some beef and extra low end, try mixing the suboscillator output into your patch.

CIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Hybrid additive phase-modulation voice on a swappable oscillator platform

Debel Iteritas Alia is a hybrid additive phase-modulation voice inspired by classic and experimental synth sounds from across the decades. Three synthesis algorithms range from classic FM plucks and basses to all-out additive anarchy. DIA features a two-parameter envelope with a huge range of shapes and timing, making it easy to dial in the exact sound you want. With CV over every parameter, a dedicated envelope output, and an absolutely massive timbral range, Debel Iteritas Alia is a powerhouse synth voice in a compact package.

DIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal to check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Originally designed as a percussion voice, the Incus Iteritas Alia also lends itself well to FM synth sounds, combining deep internal modulation with user-friendly front panel controls.

Supplier's Notes:
Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Incus Iteritas Alia

FM-based wave-mangling additive voice for synthetic percussion and instruments on a swappable oscillator platform

Incus Iteritas Alia is a new member of the Iteritas family, hammering big and bold sounds into your patches. Incus started as a percussion voice, and evolved into so much more: create kicks for any genre, snares, and metallic hits, or go melodic and create FM plucks, analogue-style basslines, and so much more. Incus uses a combination of waveshaping, saturation, wavefolding, FM, and additive synthesis, plus a slew of internal modulation, all behind easy-to-use parameters perfect for jamming.

IIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Incus Iteritas Alia

FM-based wave-mangling additive voice for synthetic percussion and instruments on a swappable oscillator platform

Incus Iteritas Alia is a new member of the Iteritas family, hammering big and bold sounds into your patches. Incus started as a percussion voice, and evolved into so much more: create kicks for any genre, snares, and metallic hits, or go melodic and create FM plucks, analogue-style basslines, and so much more. Incus uses a combination of waveshaping, saturation, wavefolding, FM, and additive synthesis, plus a slew of internal modulation, all behind easy-to-use parameters perfect for jamming.

IIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Gross, gritty, and dark industrial-strength voice on a swappable oscillator platform. Pangolin approved.

Manis Iteritas Alia is a voice based on the architecture of Basimilus. It was designed to be grittier and more aggressive by using only sawtooth waves that are manipulated, modulated, and distorted through a rethought interface. Manis Iteritas Alia is fantastic for leads, basslines, drums, darkness, detuned swarminess, or pure mayhem. Plus, MIA's dedicated envelope output is a great modulation source for the rest of your patch.

MIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal to check out any other Alia firmware, free of charge, any time.

A portion of the proceeds of every Manis Iteritas Alia sold goes to pangolin conservation.

Width: 10HP
Depth: 22mm

Notes: Gross, gritty, and dark industrial-strength voice on a swappable oscillator platform. Pangolin approved.

Manis Iteritas Alia is a voice based on the architecture of Basimilus. It was designed to be grittier and more aggressive by using only sawtooth waves that are manipulated, modulated, and distorted through a rethought interface. Manis Iteritas Alia is fantastic for leads, basslines, drums, darkness, detuned swarminess, or pure mayhem. Plus, MIA's dedicated envelope output is a great modulation source for the rest of your patch.

MIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal to check out any other Alia firmware, free of charge, any time.

A portion of the proceeds of every Manis Iteritas Alia sold goes to pangolin conservation.

Width: 10HP
Depth: 22mm

Notes: Really nice take on an arpeggiator module here. Four-channel design features editable arpeggio patterns, CV control and transposition. Real-time performance meets customisable melody generation.

Supplier's Notes:
Four-channel arpeggiator with customizable patterns and CV control

Opp Ned is a four-channel arpeggiator designed for creating patterns that can be modified with CV. Opp Ned ships with 12 of Noise Engineering's favourite arps, including tetrads, major, pentatonic major, minor third, and pentatonic minor, but you can edit and save custom arpeggios to twelve memory slots. Recall your custom arpeggios manually or with CV using the Ptn input. If you ever want to restore the factory arps, just head to the Noise Engineering Customer Portal.

The transpose input makes it easy to combine Opp Ned with external sequencers, too!

Arps have never been easier than with Opp Ned.

Features

Size and Power
8HP Eurorack
+12v: 60mA
-12v: 10mA

Opp from Norwegian Opp for "Up"
Ned from Norwegian Ned "down"
"Ups and downs"

What's in the box

Module
Power cable

*** Noise Engineering no longer include screws with newly packaged modules. Bulk screws are available for purchase. ***