Search dance music

Notes: ***B-STOCK: Box opened, product in perfect working order***


A fresh twist on a simple 303-style acid synth, featuring a triangle/sawtooth/square wave VCO, multi-mode resonant filter, simple AD envelope and a VCA which can be overdriven. Excellent value.

Supplier's Notes:
ADDAC started this module with the idea of developing a complex drum source however, somewhere along the process, it was clear how much better it performed as a synth voice and this lucky accident was embraced.

It features a VCO with a [FREQUENCY] and [FINE TUNE] knob plus a dedicated CV Input and Attenuator knob (tunable over 4 octaves).

The VCO waveform output is achieved by selecting either a Triangle or Saw through a switch. the selected waveform can then be mixed/balanced against the square wave. The resulting mix is then sent to the Filter.

The Filter features a [CUTOFF] and [RESO] resonance knob plus a Cutoff CV Input and Attenuverter knob.

A 3 position switch is used to select the filter type: Highpass, Bandpass or Lowpass.

The resulting output is then sent to the VCA.

The VCA features an Input with [INPUT GAIN] knob which at maximum can amplify the incoming signal by a factor of 2.

This is a very important control, it accepts any signal Trigger, Gate or CV. Whatever input is plugged in the signal is then fed through an AD with a very short attack and controllable decay through the [VCA DECAY] knob plus the CV Input and Attenuverter knob. The resulting slewed signal is then used to control the VCA gain.

This signal is also sent to the CV OUTPUT as well as the LED monitor.

The Accent input adds to the Input signal creating a different amplitude output.


The CV OUTPUT is normalled to the Frequency and Cutoff inputs.

Tech Specs:
9HP
4cm deep
80mA +12V
80mA -12V

The [INPUT GAIN] knob

Usually Attack/Decay envelopes have a maximum voltage of +5v, no matter if the input gate is +5v or above the AD will clip at +5v. In this case, this clipping method was not used, and instead ADDAC allowed the incoming voltage to determine the maximum AD voltage, meaning that if a +5v gate is present then the AD maximum voltage will be +5v but if a gate of +10v is sent then the AD maximum voltage will be +10v.
This also means that with higher input voltages the decay, although falling at the same speed, will be longer than with lower voltages as it has a longer range to go back to 0v.

As previously mentioned, The [INPUT GAIN] knob can amplify the incoming input by a factor of 2, allowing to use a standard +5v gate or envelope and being able to make the resultant AD go up to +10v.

The AD signal is responsible for opening the VCA. Up to +5v the VCA will open to unity gain above this value the VCA will start to amplify and eventually saturate and distort. This saturation will add harmonics to the signal which will change its gentle timbrical nature to a more unique and peculiar timbre that will make the module shine in Acid contexts.

Adding high levels of Resonance or even filter self oscillation in combination with high VCA saturation will create even more harmonics that ADDAC highly encourage the user to explore.

Notes: Dual three channel voltage controlled panning mixer

Mixer section

Channel 1 and Channel 2 are three channel mixers with potentiometers to control level of three different inputs for each channel. Each channel then has a potentiometer to control panning as well as CV control for panning and level control

Panning and VCA

The VC panners are equal loudness panning and the VCAs for each channel are linear response.

Built-in LFO

There is a built-in LFO that is normalled to the panning CV input of each channel. CH1 gets the standard LFO and CH2 gets an inverse, enabling alternating channel panning. The default is to use a TRI wave for the LFO, but there is a jumper on the back to switch it to SQU.

Width: 12hp
12V: 140mA
-12V: 120mA

Notes: Two channel expander for Bartender

Mixer section

Each channel has the following:

Stereo or mono - Each channel can be treated as a stereo channel or a mono channel with two summed inputs.

CV inputs for both panning and level control

Two send buses - You can route each channel to one of two send buses. Each send bus is stereo. You can choose if you want the send to come before or after the level/panning controls.

Mute - The mute has both latching mute (up) and a momentary mute (down). The mute uses a capacitor to slow the turn off and on of the mute action. So it is mostly click-less, but you may find an occasional pop.

Cue bus - You can route each channel to the cue bus.

Expandable Mixer Series

Bartenders can be cascaded to create 8ch, 12ch, or 16ch mixer. The main level is what is sent the main level control can act as a group control.

Barbacks can be added to add 2ch to your mix. Barbacks can also be cascaded enabling up to a 16ch mixer configuration.

Send-VCA can be added for CV control of the level of the send.

DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 10hp
12V: 125mA
-12V: 100mA

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


DJ-friendly version of AIAIAI's excellent modular headphones. Configured here with punchy S02 drivers, on-ear PU leather earpads and coiled cable.

Supplier's notes:
TMA-2 DJ has been put to the test on stages all over the world. With its reinforced headband and powerful bass, it's a specialized piece of equipment for the hardworking musician.


The titanium-coated S02 speaker unit delivers a punchy and intense sound representation focused on bass and low-end dynamics. Combining the durable H02 nylon headband and the E02 on-ear PU leather earpads providing high isolation results in a powerful sturdy headphone suitable for live performance and electronic/bass heavy music.



In the Box.

S02 Speaker unit: Punchy.

E02 Earpads: PU leather, on-ear.

H02 Headband: Nylon, Silicone padding

C02 Cable: Coiled w/adaptor, black, 4 mm, 1.5 m.



Technical Specifications.

Driver diameter: 40 mm

SPL: 117 dB

Resonance frequency: 90 Hz

Impedance: 32 Ohm

Rated power: 30 mW

Max power: 70 mW

Diaphragm material: Titanium Coated

Magnet type: Neodymium

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The Tone Science Chance Delay is a unique concept in Eurorack modules as it combines chance and randomness, with pulse delay and pulse conditioning. It is a collaboration between electronic musician/composer Ian Boddy and AJH Synth.

It can perform as a Chance generator, but is also capable of pulse stretching for Trigger to Gate conversion, pulse shortening for Gate to Trigger conversion, Gate Delay, Sub Bass Generation and also "divide by n" clock division.

There is a wide range of control and all functions can be operated manually from the front panel or can be automated using external CV voltages. Chance can range between 0 to 100%. The Gate out can be delayed by anywhere between from 0.5mS to 30 Seconds, and the output Pulse length can also vary from 0.5mS to 30 Seconds.

The TRIG push button allows manual triggering of pulses, also determined by the Chance control, and a green LED shows the output pulse status.

Includes a handy "Gate pass through" mode; when the Length control is set to zero the incoming pulse or trigger will still be determined by the Chance and Delay controls, whilst the outgoing gate length will be the same as the incoming gate length.

Compact 8hp form factor and very low power consumption make this an excellent addition to any Eurorack system.

Key features:

Chance, Gate Delay time and Pulse Length can all be set manually or controlled using external CV voltages.

The 'TRIG' push button allows manual triggering, and Chance will be applied to any manual triggering too.

Fast processing allows operation into the lower audio range, so it can perform sub bass generation on drone type sounds. In this mode the Length pot (or an external Length CV) can be used to change the PWM of the output waveform.

After the initial trigger pulse has been acted on, further incoming pulses are ignored until the current cycle has finished. This useful feature allows it to perform "divide by n" division on gate pulses, so it can be used for clock division, and the delay function can be used to add a "swing" away from the rhythm.

Gate pass through mode - if the Length pot is set to zero, then the incoming gate length is preserved, so in this case the gate has Chance and Delay time applied to it, but the outgoing gate length is the same as the incoming gate length.

By setting Chance to 100% and Delay to zero (0.5mS) it can be used as a Gate to Trigger converter, or a Trigger to Gate converter, depending on the Pulse length set with the LENGTH control. We can also use an external Length CV to shorten or increase the length of the output pulse in real time.

Fast and slow ranges for both DELAY time and PULSE length - Fast range is 0.5mS to 2 Sec and Slow Range is 2 Sec to 30 Sec.

Green status LED shows when the output pulse is high.

Front panel controls

Chance Control and CHA Input

This sets the probability of an incoming trigger or gate being passed through to the Pulse Generator circuit. The chance can be set anywhere between 0% and 100%.

The CHA input allows an external control voltage (CV) to control chance remotely. In this mode the Chance control acts as an attenuator for the incoming CV. With the Chance control fully clockwise a CV of +5V will give 100% chance, and lower CV voltages reduce the Chance accordingly. For example, a +2.5V CV will give a 50% chance. The attenuator function is useful if we are using higher control voltages of for example 0 to +10V. If we set the Chance control to the 12 o'clock position it would then halve the incoming CV signal, so in this case +10V will give 100% chance and +5V will give a 50% chance. Negative CV voltages are ignored and will be treated in the same way as zero volts..

Delay Control and DEL Input

This sets the delay amount that is applied to the leading edge of the incoming Gate or trigger received at the IN jack (or a press of the Manual Trigger button), assuming that the "Chance" has been determined to be positive. With the Delay Time switch set to FAST the Delay range will be from 0.5mS to 2 Seconds. With the Delay Time switch set to SLOW the Delay range will be between 2 Seconds and 30 Seconds.

The DEL input allows an external CV voltage to control Delay Time remotely. In this mode the Delay control acts as an attenuator for the incoming CV. With the Delay control fully clockwise a CV of +5V will give the maximum Delay time of either 2 Seconds or 30 seconds depending on the position of the Fast / Slow switch. Lower CV voltages reduce the Delay Time accordingly, so if we apply a CV of zero volts then we will get the minimum Delay time. The attenuator works on any CV patched to the DEL input in the same manner as described for the Chance control.

Length Control and LEN Input

This sets the length, or rather pulse width of the output pulse. With the LENGTH Switch set to FAST the pulse length can be anywhere between 0.5 mS to 2 Seconds. With the LENGTH Switch set to SLOW the pulse length can be between 2 seconds and 30 Seconds.

The LEN input allows an external CV to control Delay Time remotely. In this mode the Length control acts as an attenuator for the incoming CV in the same manner as the Chance and Delay controls.

Setting the Length control to zero invokes "Gate pass through" mode - in this case the incoming gate length is preserved, so the incoming pulse or trigger will still be affected by the Chance and Delay controls, but the outgoing gate length will be the same as the incoming gate length. Turning the Length control slightly clockwise will then invoke the minimum pulse length around control position 1, and further clockwise rotation will increase the Pulse Length as expected. This behaviour also applies to external CV's patched to the LEN input, where a CV of 0V will enable Gate pass through mode.

Fast / Slow mode switches

These switches allow the selection of Fast or Slow mode for Delay time and pulse length, so these ranges can be selected independently for Delay and Length. Fast range is 0.5 mS to 2 Seconds, and Slow range is 2 Seconds to 30 Seconds.

TRIG Switch

The TRIG push button allows manual triggering, and Chance will also be applied to any manual triggering, so depending on the setting of the Chance control, pressing the button has a chance of not doing anything! Holding the button down keeps the incoming gate high for as long as the button is pressed, however this is only really relevant in "Gate pass through" mode - normally only the leading edge of the input pulse is used.

IN - input jack

Connect your input here - a gate, output from an LFO, or even waveforms from a VCO. Any negative component of the input voltage will be ignored, so unipolar or bipolar signals can be used.

OUT - output jack

This outputs the binary pulse (or stream of pulses) that are generated by the Chance Delay circuitry. The gate low level is 0V and gate high level is +6V. The green status LED shows if a pulse is currently being generated.

Module Width: 8hp
Module Depth: 26mm (Including power lead)
Current Usage: 25mA Positive, 6mA Negative

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


MPX16 is an advanced sample player with sixteen backlit velocity- and pressure-sensitive pads. With it, musicians, producers and performers can trigger sound samples stored on standard SD or SDHC cards. Insert the SD card, assign its contents to any of the MPX16's pads, and go. At home in the studio as part of a producer's rig or on stage as a solution for triggering critical sounds, MPX16 is a compact sampling powerhouse.

While the hyper-responsive trigger pads and backlit display make tapping into your sample library a simple task, the integrated audio inputs empower you to add to it. Two 14-inch (6.3mm) jacks let you connect your studio gear or other sound sources to the MPX16 for sample capture. Onboard editing tools provide sample trimming and pad assignment for immediate synergy into a production or performance. Use the headphone jack to monitor your captures, or send the audio to a mixer, monitors, a recording interface, etc using the 14-inch main outs. A built-in mic provides immediate sample capture for those times when inspiration strikes; a dedicated Record Gain knob ensures you get it right.

MPX16's flexibility goes beyond pad-triggered audio playback and capture. The full-size rear-panel USB port lets you drag & drop samples from your computer and even use the MPX16 as an SD card reader/writer. The USB connection also provides a pipeline for MIDI data, enabling sample triggering from your DAW or computer-based sequencer. A 5-pin MIDI input means SD samples may be triggered from any MIDI-enabled gear such as keyboards, pad controllers, synths and electronic drums. A 5-pin MIDI output lets the MPX16 function as a dynamic pad controller. Layering wide-ranging sound sources during live and studio performance just got easier.

With the included Akai Pro File Loader software (free download), managing computer-based samples and moving them to the SD card is intuitive. This software also converts sound files into .WAV format for seamless playback on the MPX16. Samples may also be edited from the onboard sample processor; tuning, pad groups, envelopes, sample trimming, panning and volume are tweakable right from the MPX16's top-panel controls.

MPX16's compact footprint means it is at home on a tabletop, music stand, lap, tray-table or in your backpack en route to the studio. Solid Akai Pro design and industry-leading pads ensure it stands up to the daily use you expect it to see.
SD and SDHC cards sold separately.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The 'Mega Milton' is a smorgasbord of handy all analogue utilities in just 8HP that will greatly extend the functionality of your Eurorack system.

It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analogue white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor.

All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input.

The 'Mega Milton' provides essential classic synthesizer building blocks for patching in any Eurorack system.

Ideal For

Incorporating stereo external sources easily into your Eurorack system.
Signal attenuation and basic mixing in a small space.
Building percussion sounds from an analogue noise source.
Producing clocked random to add interest and variation to patterns and sounds.
Adding gated 303 style slides to patterns.
Creating and Manipulating patterns with Sample and Hold.
Buffering and monitoring voltage across multiple VCOs or other destinations with no drop.

Tech Specs

Supply: +12V 70mA / -12V 70mA
Size: 8HP
Depth: 32mm

Notes: The 'Mega Milton' is a smorgasbord of handy all analogue utilities in just 8HP that will greatly extend the functionality of your Eurorack system.

It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analogue white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor.

All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input.

The 'Mega Milton' provides essential classic synthesizer building blocks for patching in any Eurorack system.

Ideal For

Incorporating stereo external sources easily into your Eurorack system.
Signal attenuation and basic mixing in a small space.
Building percussion sounds from an analogue noise source.
Producing clocked random to add interest and variation to patterns and sounds.
Adding gated 303 style slides to patterns.
Creating and Manipulating patterns with Sample and Hold.
Buffering and monitoring voltage across multiple VCOs or other destinations with no drop.

Tech Specs

Supply: +12V 70mA / -12V 70mA
Size: 8HP
Depth: 32mm

Notes: Excellent value here. Alto's portable speaker is designed to fill a room with just one unit, plus the option to link two units wirelessly for even bigger sound. Built-in battery gives up to 100 hours of playback from a single charge.

Supplier's Notes:
Uber FX MK2 is a powerful but portable battery powered PA system with Bluetooth technology. Its 5-speaker, 320-degree sound array is the perfect solution for delivering hours of clear, punchy sound from microphones, instruments, mobile devices and more. Uber FX MK2 is not just for musicians - it's also perfect for many other indoor and outdoor events including business meetings, training sessions, backyard parties and award/graduation ceremonies - and with up to 100 hours of charge, it doesn't matter whether you have access to AC power or not.

Powerful and Clear

The innovative 200W, 5-speaker system features an 8" Woofer, stereo tweeters and full-range side-firing drivers providing 320- of audience listening area. The side-firing speakers also make for excellent live performance monitoring. UBER FX MK2 features two input channels, each with its own independent volume control and 2-band EQ and digital effects, and there's an additional third 3.5mm aux input.

Fully Wireless

With Bluetooth 5.0, the Alto Uber FX MKII offers robust streaming, linking and control: You can stream from any device to Uber FX MK2, and wirelessly connect a second Uber FX MK2s to create a stereo PA system using your favourite music streaming app. The Alto Pro App for iOS and Android provides control of mixing functions wirelessly for convenient control from anywhere. The simple single screen mixer allows you to select a channel and control all parameters effortlessly,

Portable and Convenient

Uber FX MK2 is incredibly easy to transport with its telescoping handle and wheels; it also has a handy top storage compartment, side bottle opener and front panel lighting. There are also two USB charging ports to keep your devices topped up.

Portable battery-powered 200W speaker with 320 degree sound

320 Degree Sound
Innovative 200W, 5-speaker system fills the room
All day battery
100 hours of sound on a single charge
Easy to Transport
Less lifting with telescoping handle and wheels
Create your own Mix
Built-in 2-channel mic/line/instrument mixer with EQ and FX
Stream Music Effortlessly
Bluetooth 5.0 enabled streaming and control
Wireless Control
Alto Pro Control App on iOS and Android
Stereo Speaker Link
Expand to two speakers with Bluetooth Linking
Charge your Devices
Includes two USB charging ports
Set the Right Sound
Music and Live Performance EQ presets
Third Input
Additional 3.5mm aux input
Made for Events
Top storage compartment, side bottle opener and front lighting

Tech information

Output Power: 200 W

Charge Port: 5V, 1A

Mic Inputs 1-2
Connector: XLR / 1/4" TRS Combo Input Connector
Dynamic Range: 108 dB (A-weighted)
THD+N: <0.01%
Noise EIN: >-110 dB (A-weighted)
Maximum Input Level: +1.5 dBu
Gain Range: 50 dB
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Input Impedance: 600 O

Line Inputs 1-2
Connector: XLR / 1/4" TRS Combo Input Connector
Dynamic Range: 108 dB (A-weighted)
THD+N: <0.01%
Maximum Input Level: +16 dBu
Gain Range: 24 dB
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Input Impedance: 20 kO

Instrument Inputs 1-2
Connector: XLR / 1/4" TRS Combo Input Connector
Dynamic Range: 108 dB (A-weighted)
THD+N: <0.02%
Gain Range: 24 dB
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Maximum Input Level: +6 dBu
Input Impedance: 1 mO

Channel EQ
EQ Configuration: Channels 1 and 2 have independent 2-band shelving EQs
High EQ Filter Type: 12 dB/octave shelving filter
High EQ Cutoff Frequency: 12 kHz
High EQ Gain/Attenuation: +/-15 dB
Low EQ Filter Type: 12 dB/octave shelving filter
Low EQ Cutoff Frequency: 80 Hz
Low EQ Gain/Attenuation: +/-15 dB

Aux Inputs
Connector: 1/8" (3.5 mm) TRS Input Connector
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Maximum Input Level: +12 dBu
Input Impedance: 20 kO

Line Output
Connector: 1/4" (6.35 mm) TRS Output Connector
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Output Level: Fixed +10 dBu
Input Impedance (unbalanced): 100 O

Amp/Drivers
Frequency Response: 60 Hz - 20 kHz
Max SPL: 110 dB
Power Amp: 100 W RMS mono-bridged
LF Driver: 8.0" 203 mm woofer
HF Drivers: (2) 1.0" / 25 mm tweeters
Side Drivers: (2) 3.0" / 76 mm drivers

Bluetooth Specifications
Profile: A2DP, AVRCP
Version: 5.0
Frequency: 2402 - 2480 MHz
Range: Up to 100 feet / 30.5 meters*

Battery
Type: lead-acid battery
Capacity: 12V, 7A, 84 Wh
Life: Up to 100 hours
Charging Time: 10 hours

USB-A Charging
Front USB Port: 5V, 1A
Top USB Port: 5V, 2.2A

Power
Connection: IEC
Voltage: 100-240 VAC, 50/60 Hz, 120 W

Dimensions (height x width x depth):
19.4" x 10.4" x 15.1" / 493 x 383.6 x 266.6 mm
Weight: 22.9 lbs. / 10.4 kg

Review: ***B-STOCK: Box slightly torn and creased, but content in perfect condition***


Steely Dan are the kind of band where everyone has their favourite album, with a fanbase who might well get a little heated debating which phase of the band is superior. But when it comes down to it, everyone will agree Aja is their masterpiece, where that exacting studio process and the elevated songwriting hit some magical sweet spot that yielded the semi-mythical perfect album. The grooves are so slinky as 'Black Cow' opens the record up, they spring with joy out of 'Peg' and they lock down heavy on 'Josie', and there's so much more in between. This faithful reproduction from Analogue Productions is a limited audiophile edition for a band who were made for audiophiles.

Review: Famously first released in 1973 and transferred to CD in the 1980s with no significant remastering, the Beatles two colour-coded 'best of' collections have long been in need of an overhaul. Apple has typically gone all-out on this 50th anniversary re-issue, not only remastering everything (or at least those tracks that hadn't already been tweaked by Giles Martin in recent years), but also expanding each collection to three discs via the addition of other fan favourites and tracks that missed out first time round. As for the vinyl itself, it has been half-speed remastered to guarantee superior sound quality. This boxed edition boasts both compilations, plus an insert with fresh liner notes from music journalist-turned-Guardian scribe John Harris.

Notes: Unleash your creativity

The Austrian Audio MiCreator is a new type of creative tool. Equal parts high-quality condenser microphone and simple audio interface with USB-C r connectivity, MiCreator gives you the flexibility to create what you want - how you want. Just plug in and start recording in top-notch audio quality instantly. Or expand your setup using MiCreator's additional input to achieve stereo recordings, record an additional sound source, and more. And whether you're recording at home or on the go, you can create with confidence thanks to MiCreator's ultra-durable metal housing. So, whether you're looking for a capable plug-and-play microphone or a multifaceted production tool, MiCreator simplifies your creative process and delivers no-compromise results.

Custom Condenser Capsule - Record in top notch audio quality
Max SPL: 130 dB SPL - Record even very loud sources
FlexTilt mechanic - Easily position the mic head for optimal recording
Full metal housing - Longlasting and durable
One Knob Jog Dial control - Allowing quick adjustments
Latency free direct monitoring - monitor yourself without complicated software adjustments
Exchangeable & customizable face plates for an individual and personalized look

Technical Specifications

Digital Resolution: max 48kHz/24-Bit
Digital Connector: USB-C - USB Audio Class 1.0/2.0 compliant
Directional characteristic: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity: - 35dBFS/Pa (low gain)/-15dBFS(high gain)
Hardware Gain Switch: 0dB (low)/20dB (high)
Equivalent noise level: 22 dB SPL (A) (high gain)
Max SPL: 130 dB SPL (low gain)
Output Power: 45mW (32Ohm Load)
Dynamic Range: 89 dB(A)
In/Output TRRS: for instrument cable, 2nd headphone or MiCreator Satellite or Y-Lav
Dimensions: 155 x 60 x 37 mm
Weight: 370g

Review: The blues, like any genre, deepens for a listener the more they dig into the history and context of the music. The difference with the blues is how revolutionary, influential and essential its very emergence was. Seemingly recognising this fact, Bear Family have put together this monumental box set which goes to the very heart of the blues in Memphis and tells an exhaustive story from 1919 through 1969. They don't leave a stone unturned from those 50 years, presenting what they proclaim to be at least one side from every relevant 78 or 45 disc issued from Memphis during that period. That makes for 534 tracks across 20 CDs with an accompanying hardcover book. It's more than 25 hours which tells you all you need to know about Memphis blues.

Notes: Space-conscious lowpass filter and volume processor.

A combination of VCF + VCA + Mixer that lets you mix three different sound sources, and shape their tone, and levels in a breeze.

The Pony Filter is built around the SSI2144 FATKEYS Chip. Has the elegant sound of the classic transistor filter without the associated distortions, due to Dave Rossum's "improved ladder" topology.

Features

3 Channel Mixer (Out normalized to channel three for feedback)
Temperature-compensated Q and frequency.
Compensated Volume VS Resonance
2 Cuttof CV INs.
CV 1 Selectable routing Cut-Off or Cut-Off+VCA
Voltage controlled Q
Two Segment Peak Meter

Specifications

Four-pole, 24 dB/octave
Current needs: +12V=50mA, -12V=45mA
Width: 6 HP
Depth Assembled Version: 22mm
Depth DIY Kit Version: 40mm
Designed, kits prepared and assembled in Barcelona.

Notes: Studio headphones for recording and monitoring purpose (closed).

Limited special edition circumaural studio headphones
For a range of devices thanks to a flexible STELLAR.45 driver
Includes detachable cable with mini XLR connector
Extremely comfortable, even after hours of use
Made in Germany

The next chapter of a studio legend

For 100 years, Beyerdynamic have been driven by the pursuit of the best sound. Thanks to numerous innovations such as the first dynamic stereo headphones DT 48, the robust studio legend DT 100, and the globally renowned DT 770 PRO, Beyerdynamic are now considered to be a reference for professional studio headphones.

To celebrate their 100-year company anniversary, Beyerdynamic are releasing the DT 770 PRO X Limited Edition, a time-limited special edition of studio headphones. They combine the reference-setting features of the DT 770 PRO with the flexibility of the dynamic STELLAR.45 driver system and a detachable cable. Made in Germany, the DT 770 PRO X Limited Edition opens a new chapter in the successful Beyerdynamic DT series.

A tried-and-tested acoustic signature

The DT 770 PRO X Limited Edition circumaural studio headphones feature the tried-and-tested acoustic signature of the DT 770 PRO. Powerful basses, detailed trebles and first-class impulse behaviour - professional musicians, producers, studio operators and sound engineers have been trusting in these qualities for decades. Flexible and powerful, the studio headphones are perfect for recording and monitoring purposes thanks to their closed-back design.

The reference for a range of playback equipment

Thanks to their dynamic STELLAR.45 driver (48 ohms) with its broad frequency response of 5-40,000 Hz, the DT 770 PRO X Limited Edition headphones deliver studio reference sound on a wide range of playback equipment.

Stellar.45

For this, the sound transducer uses a neodymium magnet and a voice coil made from copper-plated precision wires. The resulting high conductivity of the driver system at low weight is the reason for its high performance. The driver system keeps distortion extremely low, even at high sound pressures. The Stellar.45 has an impedance of 48 ohms and proves that low-impedance sound transducers can deliver excellent studio-quality sound.

You want it, you get it- a detachable cable

As requested by a number of users, the DT 770 PRO X Limited Edition headphones now offer even more flexibility thanks to their detachable cable. The headphones come with a 3m-long straight cable with lockable 3-pin mini XLR connector. This can be connected to a variety of devices thanks to a 3.5mm stereo jack including a screwable 6.3mm adaptor.

The most comfortable 770 of all time

For decades, the studio headphones in the DT range have not only been classified as a sound reference, but also a benchmark in comfort. In addition to the robust spring steel headband construction, it is the iconic velour ear pads that ensure the headphones are comfortable even for long studio sessions. The soft memory foam used in the headband means it ergonomically adjusts to the shape of the head. One new feature is the integrated fontanel recess. Both the headband and the ear pads can be replaced if necessary.

Professional headphones- made in Germany

Made in Germany, the DT 770 PRO X Limited Edition headphones are characterised by the high production quality that Beyerdynamic has stood for over many decades. The driver system is manufactured within extremely tight tolerances and measured several times during the various production steps.

The combination of robust metal parts and impact- and scratch-resistant ABS plastic make the DT 770 PRO X Limited Edition a long-lasting companion for everyday studio use.

For sustainability reasons, almost every part of the studio headphones can be replaced.

Applications
The DT 770 PRO X Limited Edition is a closed studio headphone suitable for professional recording and monitoring in the studio as well as on the move.

Due to the low-impedance STELLAR.45 driver, the DT 770 PRO X Limited Edition delivers studio reference sound on a wide range of end devices.

The detachable, single-sided mini XLR cable makes it easier to handle the DT 770 PRO X Limited Edition when it has to be used frequently.

The rugged headband made of spring steel gives the DT 770 PRO X Limited Edition a secure fit and the mechanical reliability needed for daily use.

Soft ear and headband pads contribute to a high long term comfort when wearing. If necessary, headband and ear pads can be replaced.

The connection cable is provided with a gold-plated mini stereo jack plug (3.5 mm) with a 1/4" adapter (6.35 mm) and can be connected to all common headphone outputs.

Technical specifications

Transducer type: Dynamic
Operating principle: Closed
Wearing type: Over-ear
Frequency response: 5 - 40,000 Hz
Nominal impedance: 48 O
Sound pressure level @ 1 mW/500 Hz: 98 dB
Sound pressure level @ 1 V/500 Hz: 112 dB
T.H.D. @ 500 Hz: < 0.05
Maximum short-term power handling capacity: 210 mW
Ambient noise isolation: 16 dBA
Nominal headband pressure: 5.5 N
Weight (without cable): 305 g
Length and type of cable: 3 m / straight cable, detachable, single-sided
Connection: Gold-plated mini stereo jack plug (3.5 mm) & 1/4" adapter (6.35 mm)


Supplied accessories

1 x Straight cable, 3-pin mini XLR (lockable) and mini stereo jack (3.5 mm), length 3 m
1 x Screw-on adapter 3.5 mm to 1/4" (6.35 mm) stereo jack
1 x Drawstring bag

Notes: What does this do?

This is a sound generator module with 3 oscillators + noise generator. This module is a complete mini synthesizer that can easily produce snare drum sounds. A 'trigger' signal is patched in order to hit the snare drum. The bottom row contains an internal mixer where you mix in 2 shell generator oscillators, one thud oscillator, and a noise generator.

The Trigger input is level sensitive. Lower voltages will result in quiet snare sounds. You can use this to simulate accent.

The Filter on the 'Impact' signal path was carefully designed just for snare drum tone control. It sounds very nice. It will not self oscillate, but the Q control can go very high in frequency. It has a 12db High pass Filter and a 12db Band Pass Filter. There is CV control for the cutoff and CV control for the internal VCA.

An auxilary audio input has been added to the filter. You can mix external sounds.

The tone of this module is very hollow. It simulates wood like snare sounds.

What this module can not do:
-FM modulation of the internal vco's
-track 1V per octave
-increase the decay legnth of the vco's. 808 like.

This module will always remain in snare land. You can not make it sound like a lead synth. This is a good thing. No menu diving, and the snare is always ready.

History of the design:

The Asteroid Snare drum started out on bread board as a TR 606 snare drum. That design only contains one oscillator, a transistor based noise generator, and a 'clipper' brute vca. It is a nice efficient old design, but it is too simple and boring. I decided to add (2) of the original oscillators, and replaced the noise generator with a digital based noise generator to make sure all production units were alike. The snare drum still was missing fullness, so I designed an addition oscillator called 'thud'. The poor vca from the original design was removing all the additional harmonics, so that was replaced by a OTA based vca, and I added tonal controls to the IMPACT signal, and the THUD signal path.

A 12db analogue filter was recently added in the singal path of the Impact circuit. Audio input was also added, with a static internal HPF on this input. The Aux input will sound metal like by default.

All of this amounts to about 200+ smt parts. Far exceeding the original design.

Dimensions
16 HP
32 mm deep

Current Draw
48 mA +12V
45 mA -12V

Notes: Endless Processor (Ex)pander Kit opens new possibilities for Endless Processor!

Now, there is pitch control over both channels. You can shift one octave up or shift down to a full sound stop, covering multiple octaves, effectively replicating the variable speed replay effect. This allows for the creation of new textures from existing sounds.

Additionally, with the expansion PCB, the Endless Processor gains an SD card slot that enables you to store up to 5 sound banks. This means everything sustained in both channels can be saved to preserve those happy accidents! However, this is not just a simple save and recall process. It allows more performing possibilities: sustain new sounds, play with them, and then recall the stored ones, all with respect to the fade controls.

And if that's not enough, there's a bonus! With the help of our web tool, you can upload the sound banks saved on the SD card and extract clickless loops of each layer in WAV format. You can then import these loops into your DAW or hardware sampler to build your composition on top of the captured sounds.

Endless Processor Expander Kit contains:

Endless Processor Ex module
Expansion PCB for the Endless Processor
Cable to connect Ex module to the expansion PCB

Width: 4HP

Depth of Endless Processor with expansion PCB attached: 45mm

Depth of Endless Processor Ex module: 30mm

Notes: Step up to the RC-5 and prime your pedalboard with maximum looping range. Capture sound with premium 32-bit quality, navigate parameters and monitor loop status with the backlit LCD, and tap into expanded operation via the control jack and TRS MIDI I/O. And with over 50 rhythms, 13 hours of stereo recording, 99 phrase memories, and more, the compact RC-5 puts a deep well of musical power at your feet.

Featuring best-in-class 32-bit AD/DA and 32-bit floating-point processing, the RC-5 captures your personal sound with full fidelity and keeps loops crystal clear, even with multiple overdubs. And with 13 hours of stereo recording time, there's plenty of space for extended creative journeys.

The RC-5 features the most advanced interface available in any compact looper pedal. The LCD lets you keep an eye on loop status as you perform, with a backlight that changes colour to indicate recording, overdub, and playback states. And coupled with the multi-function parameter knob, it's quick and easy to navigate rhythms, kits, system settings, and more in the heat of the moment.

The RC-5's versatile pedal switch controls all looping functions-record, overdub, play, stop, and undo/redo. But deeper control is also supported if you need it. Connect up to two external footswitches for direct control of many assignable functions, or an expression pedal for continuous adjustments. Players with advanced systems will love the TRS MIDI I/O, which saves space and enables remote operation from MIDI switchers and foot controllers, plus MIDI sync with drum machines and DAWs.

With 57 preset rhythms and seven different drum kits, the RC-5 is ready to elevate loop and practice sessions with inspiring grooves for any style. For each rhythm, A/B variations can be selected from the panel or controlled via MIDI while performing. The RC-5's looper engine also includes a cool reverse function that's great for infusing your music with fresh sonic colours.

The RC-5 provides 99 phrase memories, letting you store loops as fast as you create them. In addition to audio, a phrase memory includes the selected rhythm and kit, so it's ready to go when you call it up. Loop audio can be backed up to a computer via USB. And with WAV import via BOSS Tone Studio, the RC-5 becomes a pedalboard playback hub for lesson material, jam tracks, or backing music for your next gig.

Notes: Make your playing soar with majestic ambience

Powered by Multi-Dimensional Processing technology (MDP), the TE-2 Tera Echo produces a dynamic new stereo ambience effect that goes far beyond traditional delay and reverb.

Multi-Dimensional Processing for Superior Tone

Roland's innovative Multi-Dimensional Processing (MDP) analyses audio signals in many dimensions and applies ideal effects to each. By giving different dynamic changes relative to the input signal in real time, MDP can create bold, all-new sounds with a previously unattainable range of expression.

TE-2: Inspirational Echo

Thanks to MDP, the TE-2 delivers an amazing new ambience effect that satisfies and inspires. Complex internal processing produces an incredibly deep and spacious sound, dramatically enhancing the straight guitar tone without overwhelming it. Through the TE-2's simple, familiar stompbox controls and incredible sensitivity to your playing dynamics, an extremely wide range of sounds can be achieved. And with the expressive Freeze function, you can hold the current effect sound to create rich soundscapes for lead playing and sonic exploration.

The 100th BOSS Compact Series Model!

The TE-2 Tera Echo represents a milestone as the 100th model in the long history of the BOSS compact series. Starting with the release of the OD-1 Overdrive in 1977, BOSS' legendary stompboxes have been integral tools of artistic expression for millions of players around the world. Fuelled by a spirit of dedication and innovation that began nearly four decades ago, the TE-2 carries on the BOSS legacy of bringing inspiring, leading-edge technologies to musicians everywhere.

Specifications:

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Controls: Pedal switch, E. LEVEL knob, TONE knob, FEEDBACK knob, S-TIME (Spread Time) knob
Indicator: CHECK indicator (Used for indication of HOLD, and to check battery)
Connectors:, INPUT-A (MONO) jack, INPUT-B jack, OUTPUT-A (MONO) jack, OUTPUT-B jack, AC adaptor jack (DC 9 V)
Power Supply: Alkaline battery (9V, 6LR61), AC adaptor (sold separately)
Current Draw: 90 mA

Expected battery life under continuous use:
Alkaline: Approx. 3.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTE," and "Information")
Alkaline battery (9V, 6LR61)

Options: (sold separately): AC adaptor (PSA series)

Size & weight (including battery)

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: 435 g / 1 lb

Notes: Journey to New Sonic Frontiers

With the SY-1, it's never been easier to infuse your creative arsenal with BOSS's legendary guitar synth technology. This amazingly expressive tool is filled with 121 ultra-responsive sounds, all distilled down into a BOSS compact pedal that slides easily into any setup. Best of all, it's as simple to use as a standard stompbox, so you don't need any background in synth programming to bring a new world of sonic textures to your music.

SY-1 SYNTHESIZER Sound Tryout

Get interactive with Boss' custom TonePedia player and explore hundreds of sound variations. Select your instrument, tweak and choose pedal settings.

Expressive Synth Sounds, No Programming Needed

The SY-1 transforms any guitar or bass into a versatile synthesizer that's fun, inspiring, and ready to play. Backed by advanced tech first developed for the SY-300, this super-cool pedal delivers a huge selection of analogue-style synth sounds while occupying minimal space on your board. What's more, all the sounds are polyphonic, allowing you to play both single notes and chords.

Plug-and-Play and Latency-Free

The SY-1 can be used with any guitar or bass via a standard 1/4-inch cable, providing an easy, plug-and-play experience. Thanks to custom DSP and the latest BOSS innovations, the SY-1 offers latency-free performance that's a natural extension of your instrument, letting you to play freely and organically without altering your normal technique in any way.

A Universe of Synth Sounds Inside

With its 11 categories and 121 total sounds, the SY-1 puts an enormous array of synth colours at your fingertips. Expressive leads, sweeping pads, layered organs, fat basses, and more are all on tap, plus a variety of rhythmic synth patterns that are a blast to jam with. And with the grab-and-go Tone/Rate and Depth knobs, you're able to adjust any synth voice just how you like, including changing the pitch on some sounds.

At Home in Any Rig
As a standard BOSS compact, the SY-1 drops into a serial pedal chain like any other stomp. But with the send/return loop and dedicated mix controls, it's also possible to blend one or more pedals in parallel with the SY-1's synth voices. For example, you can patch drive pedals in the loop, and then send the combined output to mod, delay, and reverb pedals for overall processing. The send can be used as a direct out as well, enabling you to route synth and guitar sounds to separate destinations.

Enhance Performances with Real-Time Control
The SY-1 offers a numbers of ways to make your synth performances even more dynamic and expressive. Pressing and holding the pedal switch sustains the last-played synth sound, allowing you to jam with regular guitar over the top. You can also connect an external footswitch for tap tempo and octave-shift effects, or plug in an expression pedal for continuous Tone/Rate control.

SY-1 Sound Types

LEAD 1/2 - A wide range of sounds suitable for single-note soloing.
PAD - Full tones that work great with chords, from layered pads to synth brass and more.
BASS - Fat synth bass sounds, including filtered and sub-octave tones.
STR - Classic analogue-style strings, including layered voices and sweeping textures.
ORGAN - A large selection of organ sounds, including many with rotary-style modulation.
BELL - Percussive synth sounds with metallic resonance.
SFX 1/2 - A variety of synth sound effects, including explosive one-shot sounds, animated pitch/filter voices, and more.
SEQ 1/2 - Pulsating sounds with rhythmic pitch or filter changes.

Specifications

Nominal Input Level: INPUT, RETURN: -20 dBu
Input Impedance: INPUT, RETURN: 2.2 M ohms
Nominal Output Level: OUTPUT, SEND: -20 dBu
Output Impedance: OUTPUT, SEND: 1 k ohms
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass

Controls: Pedal switch, GUITAR/BASS switch, TYPE knob, VARIATION knob, TONE knob, DEPTH knob, EFFECT knob, DIRECT knob
Indicator: CHECK indicator (Serves also as battery check indicator)

Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
EXP/CTL jack: Stereo 1/4-inch phone type
DC IN jack

Power Supply: Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 115 mA

Expected battery life under continuous use: Alkaline: Approx. 2 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Alkaline battery (9 V, 6LR61)

Options (sold separately):
AC adaptor: PSA series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Heigh: 59 mm / 2-3/8 inches
Weight (including battery): 450 g / 1 lb

Notes: The Classic CUBE, Evolved for Maximum Flexibility

For over four decades, CUBE amplifiers have brought exceptional value to musicians everywhere, offering great sound and versatile features in portable, go-everywhere designs. The DUAL CUBE LX Guitar Amplifier carries on this long tradition, evolved with the latest BOSS advancements for unmatched flexibility. This desktop powerhouse is the ultimate guitar amp for home practice and jamming with friends. And with a generous array of connectivity options, its range extends to performing, recording, and many other applications.

Meet the Moment

With its compact size and authentic BOSS tones, the DUAL CUBE LX delivers instant gratification for everyday playing at home. And its ultra-flexible design lets you go much further when you want, providing advanced features that reach well beyond the capabilities of other desktop amps.

Practice and Jam Anywhere

Indoors and out, enjoy big, immersive sound with custom-designed stereo speakers and versatile power with the included AC adaptor or eight AA batteries.

Perform On Stage

Use the stereo Line Out jacks to directly connect to a PA system and perform with pro BOSS amp sounds, complete with mic'd cab emulation and expansive stereo effects.

Record to Your Favourite DAW

Use the DUAL CUBE LX to capture mix-ready sounds in music software on a computer or mobile device via USB or i-CUBE-Link.

Elevate Your Livestreams

With the Phones/Rec jack and mic volume control, you can capture your voice with a headphones mic and send it to the USB and i-CUBE Link outputs along with your guitar sounds.

Play Along with Backing Music

The DUAL CUBE LX offers many ways to play along with backing music from a mobile device or computer, including a stereo aux input, USB and i-CUBE Link Loopback, and an optional Bluetoothr adaptor.

Authentic Amp Tones

With its finely tuned stereo speaker system, the DUAL CUBE LX produces full, punchy guitar tones that belie the amp's small footprint. Choose from eight versatile amp types, all with natural feel and organic response honed with decades of BOSS amp development. Whatever your style or skill level, you'll find expressive sounds to build techniques and deliver inspired performances. There's also a dedicated mic preamp type, allowing you to use the amp as a portable vocal PA system.

Onboard BOSS Effects

The DUAL CUBE LX includes a variety of BOSS stereo and mono effects to enhance your sound. Out of the box, you can spice up tones with four mod effect types or Heavy Octave and add ambience with delay or two types of reverb. If you want to go even deeper, it's possible to change out effects and adjust settings via the DUAL CUBE LX Editor.

Deep Sound Customization

The intuitive panel controls on the DUAL CUBE LX make it easy to craft compelling sounds in the moment. Each amp type includes three user memories, allowing you to store all the knob settings for quick recall. And with the DUAL CUBE LX Editor, there's a world of additional creative power to explore. Select different amp and effect variations, adjust detailed parameters, and more from your Mac or Windows computer.

Stereo In for Modelers and Pedalboards

The DUAL CUBE LX features a special Stereo In amp type for connecting stereo devices, complete with advanced spatial processing that makes it sound like you're playing through a much larger cabinet. By default, it provides rich, full-range sound for an amp/effects processor such as the GT-1000, GT-1000CORE, GX-100, GT-1, or IR-200. With the DUAL CUBE LX Editor, you can alternately choose a neutral guitar amp tone inspired by the famous Roland JC-120, giving you an ideal platform for exploring the stereo capabilities of pedals like the BOSS 500 and 200 series.

Expand Your Possibilities

With optional FS-series footswitches, you can operate the onboard looper and switch memories while performing.


Specifications

Rated Power Output: 10 W (5 W+5 W)
Nominal Input Level: GUITAR/STEREO IN L, R: -10 dBu (1 M ohm), i-CUBE LINK/AUX IN: -20 dBu (15 k ohm)
Nominal Output Level: LINE OUT L/MONO, R: -10 dBu
Speakers: 10 cm (4 inches) x 2
Controls: POWER switch, AMP TYPE knob (ACOUSTIC SIM, JC CLEAN, US COMBO, BRIT COMBO, HI-GAIN STACK, METAL STACK, EXTREME, MIC, STEREO IN), MEMORY button, GAIN knob, VOLUME knob, BASS knob, MIDDLE knob, TREBLE knob, EFFECTS knob (CHORUS, FLANGER, PHASER, TREMOLO, HEAVY OCTAVE), DELAY/REVERB knob (DELAY, REVERB, SPRING), TAP button, MIC VOL knob, MASTER knob, LOOPBACK switch (i-CUBE LINK/AUX IN), LOOPBACK switch (USB)
Indicators: POWER, MEMORY, TAP, REC, PLAY, DUB

Connectors: GUITAR jack/STEREO IN L, R jacks: 1/4-inch phone type, i-CUBE LINK/AUX IN jack: Stereo Miniature phone type (Stereo, CTIA), FOOT SW jack: 1/4-inch TRS phone type, Bluetooth ADAPTOR connector: Dedicated connector, USB port: USB B type,, DC IN jack

PHONES/REC OUT jack: Stereo, Miniature phone type (Stereo, CTIA), LINE OUT L/MONO, R jacks: 1/4-inch phone type

Power Supply: AC adapter (DC 9 V), Alkaline battery (AA, LR6) x 8
Rechargeable Ni-MH battery (AA, HR6) x 8
Current Draw360 mA

Expected battery life under continuous use
Alkaline battery: Approximately 8 hours
Rechargeable Ni-MH battery: Approximately 10 hours (*1)

*1 When using batteries having a capacity of 2,500 mAh.
* These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
Accessories: Owner's Manual, Leaflet USING THE UNIT SAFELY, AC adaptor, Power cord, Mini cable (4-pole miniature phone type)
Options (sold separately)
Footswitch: FS-5U, FS-6, FS-7
Bluetoothr Audio MIDI Dual Adaptor (MODEL BT-DUAL)
Wireless MIDI Expression Pedal: EV-1-WL
Size & weight

Width: 341 mm / 13-7/16 inches
Depth: 162 mm / 6-7/16 inches
Height: 215 mm / 8-1/2 inches
Weight (excluding AC adaptor): 3.3 kg / 7 lbs 5 oz

Notes: Premium tone for players on the go

Ultra-portable and easy to use, the GT-1 delivers pro-level tones everywhere you play. Driven by the powerful BOSS GT-series engine, it gives you access to a huge selection of world-class amps and effects for all types of music. A streamlined interface enables quick and intuitive sound creation, while an assignable control switch and expression pedal provide dynamic real-time effects adjustment. And by connecting to BOSS TONE CENTRAL, you can download free pro patches, editing software, and more. Equally suited for beginners, weekend warriors, and traveling players, the GT-1 packs premium sound in a compact and rugged package.

Exceptional Sound

Thanks to its Premium BOSS sound engine, the GT-1 provides tone quality and sound-shaping ability that far exceeds typical compact multi-effects. A history of BOSS processing is at your fingers, from classics such as the OD-1 Overdrive to modern effects powered by innovative MDP technology. There's a huge selection of COSM amp tones on tap too, including vintage legends and BOSS original amps optimized for ideal tone and response. Specialized effects like Acoustic Simulator, Guitar Simulator, and others provide numerous tonal options, and there's even a looper to enhance your practice sessions and stage performances.

Portable Tone Partner

The GT-1 was designed for musicians on the move. It's surprisingly lightweight and compact, yet still delivers the rugged durability that BOSS is famous for. The modern design is easy to slip in and out of a guitar bag's accessory compartment, with no worries of hard edges causing damage to your axe. AC or battery power provides flexibility for any performing situation, and up to seven hours of battery life is available for street performing and other mobile gigs.

Easy Patch Selection and Sound Creation

With the GT-1, it's simple to find fantastic tones for your style, and just as simple to customize them to taste. Beginners can get great sounds right away, while more experienced players will appreciate how quick and intuitive it is to adjust sounds. The Easy Select function allows you to choose patches by genre, distortion, or effect type, while Easy Edit lets you tweak drive, modulation, and echo tones to perfection with little effort. Dedicated panel buttons provide quick on/off switches for effect groups, and also unlock deep-dive parameters for microscopic fine-tuning.

BOSS Tone Central and BOSS Tone Studio

At BOSS Tone Central, you'll find tons of free patch collections for playing all types of music with the GT-1. Created by pro guitarists, these patches are dialled-in and ready to use, and make great starting points for advanced players who like to create their own custom sounds. The free BOSS Tone Studio software provides a full-featured editor/librarian for the GT-1, as well as integrated access to all the patch collections at BOSS Tone Central.

Maximum Control in a Small Space

The GT-1's three footswitches are smartly designed to provide patch selection, tuner access, looper control, and more in a minimal footprint. The dedicated CTL1 switch is freely assignable to functions like tap tempo, effects on/off, and numerous others, while the expression pedal and toe switch are assignable to volume, wah, and various effects parameters. If you crave more control, there's even a jack for connecting up to two external footswitches or an expression pedal. And in addition to providing access to BOSS Tone Central and BOSS Tone Studio, the GT-1's USB jack lets you record tones with your favourite DAW.

Specifications

Sampling Frequency: 44.1 kHz
AD Conversion: 24 bits + AF method
* AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.
DA Conversion: 24 bits
Effects: 108 types
Patches: 99 (User) + 99 (Preset)
Phrase Loop: 32 sec
Nominal Input Level: INPUT: -10 dBu, AUX IN: -20 dBu
Maximum Input LevelINPUT: +7 dBu, AUX IN: 0 dBu
Input Impedance: INPUT: 1 M ohm, AUX IN: 27 k ohms
Nominal Output LevelOUTPUT (L/MONO, R): -10 dBu, PHONES: -10 dBu
Output Impedance: OUTPUT (L/MONO, R): 1 k ohm, PHONES: 44 ohms
Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater, PHONES: 44 ohms or greater
Controls: DOWN switch, UP switch CTL1 switch, EASY SELECT button, EASY EDIT button, FX1/COMP button, OD/DS button, PREAMP button, FX2/MOD button, DELAY button, REVERB button, MEMORY EDIT button, EXIT button

Display: Graphic LCD (132 x 32 dots, backlit LCD)
Connectors: INPUT jack, OUTPUT (L/MONO, R) jacks: 1/4-inch phone type, CTL2, 3/EXP2 jack: 1/4-inch TRS phone type, AUX IN jack: Stereo miniature phone type, PHONES jack: Stereo miniature phone type, USB COMPUTER port: USB type B, DC IN jack
Power Supply: Alkaline battery (AA, LR6) x 4, AC adaptor (sold separately)
Current Draw: 200 mA

Expected battery life under continuous use:
Alkaline: Approx. 7 hours
* These figures will vary depending on the actual conditions of use.
Accessories: Owner's manual, Leaflet "USING THE UNIT SAFELY", Alkaline battery (AA, LR6) x 4

Options (sold separately):
AC adaptor: PSA series
Footswitch: FS-5U, FS-5L, FS-6, FS-7
Expression Pedal: FV-500L, FV-500H, Roland EV-5

Size & weight

Width: 305 mm / 12-1/16 inches
Depth: 152 mm / 6 inches
Height: 56 mm / 2-1/4 inches
Maximum height: 74 mm
2-15/16 inches
Weight (including battery): 1.3 kg / 2 lbs 14 oz

Notes: Introduced in 1974 and produced for over 14 years, the Roland RE-201 Space Echo stands among the most legendary and sought-after effect units in music history. Known for its distinctive rhythmic echo sounds, warm character, and highly playable sonic quirks, this tape-based classic continues to inspire musicians, producers, and audio mixers over four decades on.

With the RE-2, the authentic sound and behaviour of the Space Echo is now available in the famous BOSS compact series for the first time. Backed by intensive R&D and our latest innovations, the RE-2 delivers the coveted magic of the RE-201 in a pedalboard-friendly footprint-realized in flawless detail by the company that designed the original.

When tape-based echoes were standard in the music world, the RE-201 was a leader in its class. Equipped with three evenly spaced tape heads and a spring reverb tank, it could produce everything from clean, single delays to dense, rhythmic echoes and ambient washes. The RE-201's appealing sound was influenced by many factors, from the warm compression of magnetic tape saturation to the evolving modulation produced by motor speed fluctuations, friction, and other elements. Last but not least, analogue preamp circuitry was a key ingredient in the Space Echo's rich sonic recipe.

In developing the RE-2 and its big brother, the RE-202, BOSS engineers have fully reproduced all the complex, non-linear behaviours that contribute to the RE-201's immortal character. We carefully analysed several vintage RE-201s, including a pristine original unit from the BOSS and Roland factory archive. Everything that influences the sound has been recreated with all-new algorithms, including the tape path, record/playback mechanism, motor variations, preamp coloration, spring reverb character, and more.

The RE-2 squeezes the complete sonic character of the RE-201 into the classic BOSS compact pedal format. The 11-position mode selector lets you dial in different virtual tape heads with or without spring reverb, and you can balance the echo/reverb blend with independent level knobs. Every behaviour is accurately replicated, such as the gradual pitch change that occurs with Repeat Rate tweaks and the runaway feedback that happens when maxing the Intensity knob. And with the expressive Wow & Flutter control, you can conjure all the natural modulation characteristics that are essential to the Space Echo sound.

The RE-2 takes the Space Echo experience further with versatile features for today's music. Delay time has been doubled and tap tempo control is supported, and there's a cool Twist function for creating evocative special effects as you perform. For the dry sound, you can choose between the warm and fat RE-201 preamp tone or a clean signal with zero processing. Full stereo I/O is available, and it's possible to mute the dry signal for parallel effect setups and studio use. The RE-2 also supports expanded control via external footswitches or an expression pedal, including continuous pedal control of multiple panel functions at once.

Specifications

Modes: 11 modes
Nominal Input Level: INPUT A(MONO), INPUT B: -20 dBu
Maximum Input Level: INPUT A(MONO), INPUT B: +7 dBu
Input Impedance: INPUT A(MONO), INPUT B: 1 M ohm
Nominal Output Level: OUTPUT A(MONO), OUTPUT B: -20 dBu
Maximum Output Level: OUTPUT A(MONO), OUTPUT B: +7 dBu
Output Impedance: OUTPUT A(MONO), OUTPUT B: 1 k ohm
Recommended Load Impedance: OUTPUT A(MONO), OUTPUT B: 10 k ohms or greater
Bypass: Buffered bypass

Controls: MODE knob, REPEAT RATE knob, WOW & FLUTTER knob, INTENSITY knob, TONE knob, ECHO knob, REVERB knob, CARRYOVER switch
Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)

Connectors: INPUT A(MONO) jack, INTPUT B jack, OUTPUT A(MONO) jack, OUTPUT B jack: 1/4-inch phone type
CTL/EXP jack: 1/4-inch TRS phone type
DC IN jack
Power Supply: Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
Current Draw: 75 mA

Expected battery life under continuous use: Alkaline: Approx. 4.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (9 V, 6LR61)
Options (sold separately)AC adaptor: PSA series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: (including battery)450 g / 1 lb

Notes: The Singularity is basically the fuzz section from the Black Hole Symmetry which is unique in sending the signal through a JFET transistor then 3 silicon transistors to end up being destroyed!

The Singularity keeps the look and fun of the Disintegrate setting to a single output volume control and adds a 3-position toggle switch to cut the output Low-Pass filter at 3 different frequencies.

Controls

Volume: Fuzz level.
3-position switch: Low-Pass filter frequency at 1.5 kHz (BHS style), 3.3 kHz, 16 kHz.

Notes: The Singularity is basically the fuzz section from the Black Hole Symmetry which is unique in sending the signal through a JFET transistor then 3 silicon transistors to end up being destroyed!

The Singularity keeps the look and fun of the Disintegrate setting to a single output volume control and adds a 3-position toggle switch to cut the output Low-Pass filter at 3 different frequencies.

Controls

Volume: Fuzz level.
3-position switch: Low-Pass filter frequency at 1.5 kHz (BHS style), 3.3 kHz, 16 kHz.

Review: ***B-STOCK: Missing obi-strip***


This triple pack box set from Craft Recordings takes a look at legendary jazz saxophonist Sonny Rollins and his run for Lester Koenig's revered Los Angeles label Go West. As well as presenting seminal albums Way Out West and Sonny Rollins and the Contemporary Leaders in full, this collection also presents six additional alternative takes from both album sessions, allowing listeners to hear the development of such iconic recordings as 'Come, Gone'. With additional liner notes from noted music historian Ashley Kahn and an interview with Rollins from 2021, this is an authoritative look at a true legend in the legacy of jazz.

Notes: Lo-fi looks, killer sound. Serious filth here from Death By Audio. Surprising versatility with simple controls, offering mild overdrive if you want but specialising in grimy fuzz.

Supplier's Notes:
Call in the Army, the Navy, Scotland Yard, your mom, and the Mario Brothers! You'll need all the help you can get to stop this endless wall of fuzz from raging! This kill-all circuit explodes the meanest, nastiest, most insane distortion to make you the ruler of the fuzz universe.

This Death By Audio pedal has hand spray-painted graphics covering up meaty components and sound, giving you a high-tech fuzz mutilator at a punk rock price. With three knobs it can create a multitude of ultimate fuzz, boost, overdrive, and distortion sounds. Listen for yourself and you will see, this is the thickest-sounding sustaining fuzz pedal we have ever heard.

Controls

Volume: Controls the overall output level.

Fuzz: Controls the gain of the fuzz circuit. At its lowest setting the pedal just acts as a tone shifter. As the fuzz knob is turned up it sweeps from a booster to an overdrive to a thick distortion to a full on blown out war of fuzz.

Tone: A specially designed multi-curve shaping filter which changes the timbre of the pedal from super deep bass sludge to screaming highs.

Specs

Dimensions: 5.87" x 4.72" x 2.5" (including hardware)
Weight: 18 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery)
Current Draw: 1 mA

Review: Released in the same breath as a fresh rendition of Holst's Planets suite, Deutsche Grammophon turn their attentions to the timeless efforts of German-American composer and conductor William Steinberg. After founding Command Classics, producer and record executive Enoch Light signed Steinberg as a conductor for the label. Working with engineer Bob Fine, Steinberg went on to record some remarkable albums on 35mm - a technique that offered a distinct improvement in sound over Steinberg's previous recordings. This new edition of his Boston Symphony Orchestra capturings is set to be released in multiple formats, of which this 3xLP is just a taster (albeit the best choice for audiophiles). Get a taste of Steinberg's style by listening to 'Schubert: Symphony No. 3: II Allegretto'.

Review: British and American artists working in the experimental scene were in fine fettle during the mid to late 1970s, though it is a rather under-investigated time. This new, vast and comprehensive box set from Dialogo's - made in full collaboration with all of the composers or their estates - serves up all ten of the albums Brian Eno's Obscure Records label put out. Each one has been remastered and an extensive booklet is included making this an essential collection that documents some of the most vital sounds to emerge during the second half of the 20th Century.

Notes: The Output Bus is your ultimate output module: Presented by DivKid and Befaco, meant to be the last link in your modular chain!

Inspired by pro audio and studio summing units the Output Bus allows for summing style mixing, external gear integration, soft clip limiting, flexible output types, headphone monitoring and level visualization.

The module works great mixing all your other mixers in your setup, to return mono or stereo FX into the master bus and for bringing in external stereo line level gear with ease. All of this in just 8HP while also being able to visualize your final levels, output appropriate signals on the right cable type and monitor in headphones.

Features:

Six stereo inputs.
Line/synth selector in input six.
Modular level minijack out.
6,5" Jack balanced out.
Minijack and 6,5" phones out.
Led Vu-meter.
Soft clipping circuit at main output.

Speculations:

Current needs: +12V: 70mA, -12V: 68mA
Width: 8 HP
Depth: 30mm including power connector
Designed, kits prepared and assembled in Barcelona.

Notes: Psychosis is a high quality true stereo - 6 channel mixer eurorack module, that has the unique ability to pan an input signal, from left to right with a single control.

It is equipped with a set of 4 stereo effects - reverb, delay, chorus and flanger, all trimmed for the modular levels.

This module is an easy gateway into mixing multiple signals as the last part in your signal chain.

10HP.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Psychosis is a high quality true stereo - 6 channel mixer eurorack module, that has the unique ability to pan an input signal, from left to right with a single control.

It is equipped with a set of 4 stereo effects - reverb, delay, chorus and flanger, all trimmed for the modular levels.

This module is an easy gateway into mixing multiple signals as the last part in your signal chain.

10HP.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The Wave Transformer is a complex single oscillator with 7 audio outputs. Its method of wave shaping differs from other complex oscillators in that it is not based upon classic wave folding such as is common in West Coast synthesis, or filtration such as is common in East Coast synthesis.

This analogue, vintage-voiced, voltage-controlled oscillator features over 8 octaves of accurate pitch tracking. Its 7 simultaneous wave outputs include a unique Complex output. This strange and novel output varies between a simple waveform (triangle, unless you patch a signal into the Shape Insert jack) and a complex transformation of the harmonic structure of the original waveform. It contains a unique mixture of the fundamental frequency, odd order harmonics, even order harmonics and subharmonics. The Sub Octave panel control will determine whether the sub harmonics are derived from one octave down, two octaves down, or are muted altogether. It will vary from a simple waveform to a silhouette of your cat watching you as you react to a "present" that it left for you on the counter. No, seriously.

The module's Transform control morphs from a basic waveform through many strange iterations into a complex, gnarled mass of audio mutations at the Complex output using an asymmetrical multi differential audio transmutation circuit. You can yield countless variations on these permutations by combining this novel circuit with Hard Sync, Soft Sync, Linear FM and Exponential FM.

Additionally, you can mute the source waveform to use the circuit as a harmonic gate/VCA, rendering the Wave Transformer a voice unto itself.

If that is not enough, there is a Shape Insert that allows you to transform external oscillations and modular-level audio sources.