100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 101 on page 1 of 3
1  2  3  »
2hp
Cat: 727388 Rel: 23 May 19 • View all Synth modules
 
Digital oscillator module with sub output & wavefolding - silver
Notes: Sine is a harmonically pure VCO with two distinct outputs.

The primary output contains a perfect sine wave with a wide frequency range and pristine volt per octave tracking. The Sub output features two sine tones that can be blended together to achieve a mix of one octave below, or a fifth above the primary output's frequency.

In addition, both outputs have an internal wavefolder that adds harmonic content to the signal allowing for spectrally complex tones within a single module. Keep your tones pure (or not!) with Sine.
Read more
 1 in stock $137.41
2hp
Cat: 727389 Rel: 02 Oct 19 • View all Synth modules
 
Digital oscillator module with sub output & wavefolding - black
Notes: Sine is a harmonically pure VCO with two distinct outputs.

The primary output contains a perfect sine wave with a wide frequency range and pristine volt per octave tracking. The Sub output features two sine tones that can be blended together to achieve a mix of one octave below, or a fifth above the primary output's frequency.

In addition, both outputs have an internal wavefolder that adds harmonic content to the signal allowing for spectrally complex tones within a single module. Keep your tones pure (or not!) with Sine.
Read more
 2 in stock $149.32
Cat: 739048 Rel: 29 Jul 19 • View all Synth modules
 
Eurorack power supply module - 4HP
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.4A
-12V @ 1.25A
+5V @ 1.0A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
 1 in stock $138.50
AKG
Cat: 739904 Rel: 29 Jul 19 • View all Studio headphones
 
Foldable over-ear headphones featuring superior isolation & extended bass response
Notes: Whether you're an artist, engineer, podcaster or beat maker, you're always in creative mode. AKG K361 Professional Studio Headphones strike the perfect balance between studio-quality sound, plush comfort, and a sleek, sturdy design that stands up to your mobile lifestyle.

K361s are precision-engineered to reproduce natural, balanced audio in exceptional detail, so you can make more confident decisions when you're mixing and editing. They deliver deeper bass and higher highs than any other model in their class, with a stunning frequency response of 15 Hz to 28 kHz. Plush, ergonomic earcups cradle your ears in supreme comfort - because once you hear how amazing your K361s sound, you won't ever want to take them off.
Read more
 2 in stock $108.20
AKG
Cat: 739905 Rel: 30 Jul 19 • View all Studio headphones
 
Foldable over-ear headphones featuring superior isolation & extended frequency response from 5Hz to 40kHz
Notes: Whether you're an artist, engineer, podcaster, video editor or content producer, you're always in creative mode. AKG K371 Professional Studio Headphones strike the perfect balance between studio-quality sound, plush comfort, and a sleek, sturdy design that stands up to your mobile lifestyle.

K371s are precision-engineered to match AKG's Reference Response acoustic target to reproduce natural, balanced audio in extraordinary detail, so you can make more confident decisions when you're mixing and editing. They deliver deeper bass and higher highs than any other model in their class, with a stunning frequency response of 5 Hz to 40 kHz. Plush, ergonomic earcups cradle your ears in supreme comfort - because once you hear how amazing your K371s sound, you won't ever want to take them off.
Read more
 2 in stock $149.32
Cat: 743527 Rel: 01 Jan 90 • View all Studio & speaker controllers
 
***B-STOCK: Box opened, product unused***
Notes: The ART SCC is the ideal compact solution allowing you to take complete control of your studio space. Three selectable stereo sources can be quickly and easily routed to any or all of three sets of stereo balanced outputs from the front panel. Sources can be individually selected or blended from the front panel. Separate trim pots ensure proper levels between sources can be preset. A large single volume knob controls the overall output level of the system.

A separate cue source input with its own outputs and level control allows a separate headphone mix to run in parallel to the main mix. The headphone output can easily switch between the cue source and the main input source with the touch of a single button on the front panel.

Additional controls on the SCC include a master mute switch, and a mono switch allowing you to sum the stereo inputs to mono to check phase in any mix.

In a typical studio setup, one set of inputs on the SCC would connect to the main output of your DAW workstation or computer audio card. Secondary outputs or headphone output would be connected to the SCC's Cue Mix input allowing for a second, completely separate headphone mix. Other sources (keyboard, iPod, analog sub mixer etc) can connect to the additional stereo inputs.

Outputs would be connected to nearfield and midfield monitors or monitors and subwoofer. Multiple inputs and outputs can be used at the same time.
Read more
 1 in stock $128.77
Cat: 743523 Rel: 01 Jan 90 • View all Compressors limiters & gates
 
***B-STOCK: Box opened, product unused***
Notes: The DUAL LIMITER has a unique design that will enhance the sonic textures of your audio system for years to come. Developed in partnership with studio and live-sound engineers, the DUAL LIMITER is very musical.

The heart of the Dual Limiter is a unique PWM gain control circuit. Combined with its intelligent detector, the result is a Classic sounding compressor/limiter without the traditional nose and distortion artefacts.

The DUAL LIMITER may be used as either a compressor or a limiter with all of the following:

- Multitrack or analogue recording device
- In a mixer's channel insert points
- Between a microphone preamp and signal processors
- Between pre-amplified electronic musical instruments (synthesizers, guitars, bass, samplers, acoustic instruments with pickups) and other line-level equipment
Read more
 1 in stock $128.77
VARIOUS
Assorted Music Collection 01 (6xLP box + slipmat)
Cat: ASS 01. Rel: 28 May 19
Techno
  1. Jonas Saalbach - "Sapphire" (7:07)
  2. D-Chai - "Tayoe" (6:01)
  3. Cybordelics - "Adventures Of Dama 2017" (feat James Davis - Chris Maico Schmidt mix) (10:21)
  4. Cybordelics - "Adventures Of Dama 2017" (feat James Davis - Bodo Felusch mix) (13:05)
  5. Bodo Felusch - "Spacefunk" (Barbaros remix) (7:57)
  6. Max Cavalerra - "Eternity" (Axel Bartsch remix) (8:19)
  7. Ramon Zenker & Harada - "Xylopia" (Pierre Deutschmann remix) (7:13)
  8. Mikerobenics - "Julika 2018" (The Electronic Advance remix) (8:49)
  9. Bassface Sascha - "It's Killing Me" (4:26)
  10. Hans Solo & XPQ-21 - "Monolog" (5:53)
  11. Sam Junk - "Lost" (Heinrich & Heine remix) (6:53)
  12. Kindred Spirits - "Antartica" (Peer Kusiv remix) (7:15)
Played by: Vincent Inc
 in stock $117.94
London Calling: A Toast To Julie London (limited numbered autographed 180 gram vinyl 2xLP + booklet)
Cat: ATMLP 3107A AUTOGRAPHED. Rel: 28 May 19
Jazz
  1. Goody Goody (2:44)
  2. Call Me Irresponsible (3:33)
  3. Bye Bye Blackbird (2:48)
  4. I Heard It Through The Grapevine (5:27)
  5. How About Me? (2:54)
  6. Cry Me A River (4:00)
  7. I've Got A Crush On You (2:37)
  8. Blue Moon (3:12)
  9. Light My Fire (3:33)
  10. Sway (5:03)
  11. Go Slow/Nice Girls Don't Stay For Breakfast (2:52)
  12. Summertime (4:59)
  13. It's Impossible (3:50)
  14. As Time Goes By (5:15)
  15. You The Night & The Music (2:20)
  16. Ev'ry Time We Say Goodbye (4:00)
  17. Summertime (Piano & vocal) (6:11)
 in stock $121.18
Cat: 742279 Rel: 08 Aug 19 • View all DJ cartridges
 
AT-XP5 cartridge pre-mounted on the AT-HS6BK headshell
Notes: The AT-XP series cartridges provide a high-quality sound for vinyl DJ's. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

- Audiophile DJ cartridge AT-XP5 pre-mounted on the AT-HS6BK headshell
- VM dual magnet construction
- Durable robust design for high-quality specialist DJ playback
- Carbon fibre-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
- Compatible with the replacement styli ATN-XP3 and ATN-XP7
- Configuration as single cartridge (AT-XP5), Replacement Stylus (ATN-XP5) and as headshell bundle together with the headshell AT-HS6BK available (AT-XP5/H)
Read more
 3 in stock $107.13
Runaway Boys: The Anthology (40th Anniversary Deluxe Edition) (limited 180 gram vinyl 4xLP box set + 40 page hard-back book + board game + collectibles + dice)
BMG
Cat: 405053 8497663. Rel: 04 Oct 19
50s/60s
  1. Runaway Boys (3:02)
  2. Fishnet Stockings (2:26)
  3. Ubangi Stomp (3:13)
  4. Jeanie, Jeanie, Jeanie (2:21)
  5. Storm The Embassy (4:08)
  6. Rock This Town (3:27)
  7. Rumble In Brighton (3:15)
  8. Stray Cat Strut (3:17)
  9. Crawl Up & Die (3:13)
  10. Double Talkin' Baby (3:05)
  11. My One Desire (2:57)
  12. Wild Saxaphone (3:03)
  13. Baby Blue Eyes (2:49)
  14. Little Miss Prissy (3:02)
  15. Wasn't That Good (2:46)
  16. Cryin' Shame (3:29)
  17. (She'll Stay Just) One More Day (3:39)
  18. You Don't Believe Me (2:56)
  19. Gonna Ball (3:15)
  20. Wicked Whisky (2:18)
  21. Rev It Up & Go (2:28)
  22. Lonely Summer Nights (3:20)
  23. Crazy Mixed-up Kid (2:41)
  24. Rebels Rule (3:27)
  25. Too Hip, Gotta Go (2:36)
  26. Look At That Cadillac (4:04)
  27. Something's Wrong With My Radio (2:36)
  28. 18 Miles To Memphis (3:01)
  29. (She's) Sexy + 17 (3:30)
  30. Dig Dirty Doggie (2:00)
  31. I Won't Stand In Your Way (3:55)
  32. Hotrod Gang (2:47)
  33. How Long You Wanna Live, Anyway? (2:42)
  34. What's Goin' Down (Cross That Bridge) (2:42)
  35. Sweet Love On My Mind (4:21)
  36. Somethin' Else (3:10)
  37. Cruisin' (2:07)
  38. I Won't Stand In Your Way (3:29)
  39. Oh Boy (live In Toronto 1983) (2:46)
  40. Drink That Bottle Down (5:03)
  41. Can't Hurry Love (3:46)
  42. Looking Out My Backdoor (2:38)
  43. Lucky Charm (Ooh Wee Suzy) (3:27)
  44. Lookin' Better Every Beer (3:37)
Review: Rockabilly legends the Stray Cats have been in the headlines with their first brand new material in 26 years. That came in the form of their 40th album recently, but now this Runaway Boys album is a special, deluxe, limited edition vinyl box set that features the band's first three classic albums Stray Cats, Gonna Ball and Rant'N'Rave. A special 40 page booklet is also included, as is a whole LP of rare tracks, and a board game where you can race across England's south coast with dice and bespoke playing pieces. This is an epic release to mark an epic band who very much shaped the rockabilly sound.
Read more
 in stock $108.20
Essential Collection Vol 1 (180 gram audiophile vinyl 6xLP box + 3 posters + insert in slipcase)
Cat: 405053 8463194. Rel: 03 May 19
Rock
  1. Ich Mache Einen Spiegel (Dream part 4 - Affenstunde) (8:23)
  2. Ich Mache Einen Spiegel (Dream part 5) (5:17)
  3. Ich Mache Einen Spiegel (Dream part 49) (7:11)
  4. Affenstunde (18:34)
  5. Ah (Hosianna - Mantra) (4:42)
  6. Kyrie (5:19)
  7. Hosianna - Mantra (10:09)
  8. Abschied (Das V Buch Mose) (3:12)
  9. Segnung (6:00)
  10. Andacht (part 1) (0:43)
  11. Nicht Hoch Im Himmel (6:17)
  12. Andacht (part 2) (0:45)
  13. Maria (bonus track) (4:29)
  14. Kleiner Krieger (Einsjager & Siebenjager) (1:05)
  15. King Minos (4:27)
  16. Morgengrusse (2:57)
  17. Wurfelspiel (2:59)
  18. Gutes Land (5:15)
  19. Einsjager & Siebenjager (19:23)
  20. King Minos II (bonus track) (1:54)
  21. Wo Bist Du? (bonus track) (5:44)
  22. Aguirre I (Aguirre) (7:20)
  23. Morgengruss II (2:58)
  24. Aguirre II (6:10)
  25. Agnus Dei (3:08)
  26. Vergegenwaertigung (16:33)
  27. Aguirre III (bonus track) (7:13)
  28. Bruder Des Schattens (Nosferatu) (5:43)
  29. Hore, Der Du Wagst (5:59)
  30. Das Schloss Des Irrtums (5:37)
  31. Die Umkehr (5:58)
  32. Mantra I (6:15)
  33. Morning Sun (3:22)
  34. Venus Principle (4:43)
  35. Mantrra II (5:22)
  36. Die Nacht Der Himmel (5:07)
  37. Der Ruf Der Rohrflote (3:35)
  38. To A Little Way (2:33)
  39. Through Pains To Heaven (3:42)
  40. On The Way (3:54)
  41. Zwiesprache Der Rohrflote (3:21)
 in stock $103.87
Cat: 745120 Rel: 27 Aug 19 • View all Wireless microphones
 
Dual UHF wireless beltpack system
Notes: Dual wireless microphone system with fixed UHF receiver and 2 beltpack transmitters, supplied with a choice of neckband or lavalier microphones. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

In the box:

Dual channel receiver
2 x beltpack transmitters
2 x neckband microphones
2 x lavalier microphones
4 x AA batteries
2 x UHF antennas
2 x antenna leads
2 x rack-mounting ears
Mains power adaptor
6.3mm jack to jack lead
Read more
 2 in stock $124.75
Cat: 745118 Rel: 27 Aug 19 • View all Wireless microphones
 
Dual UHF wireless beltpack system
Notes: Dual wireless microphone system with fixed UHF receiver and 2 beltpack transmitters, supplied with a choice of neckband or lavalier microphones. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

In the box:

Dual channel receiver
2 x beltpack transmitters
2 x neckband microphones
2 x lavalier microphones
4 x AA batteries
2 x UHF antennas
2 x antenna leads
2 x rack-mounting ears
Mains power adaptor
6.3mm jack to jack lead
Read more
 2 in stock $124.75
Cat: 735372 Rel: 27 Aug 19 • View all Studio mixers
 
Compact mixer with USB/Bluetooth
Notes: Citronic have been around ages, quietly churning out pro audio kit without much fuss. The CSM8 is an understated 8-channel mini mixer for live use, with a clever USB stick/Bluetooth option for backing tracks. Very Citronic.

Supplier notes:
Compact format audio mixer with 6 mono input channels and a stereo line input. Each mono channel has a combo XLR/jack input with individually switchable mic/instrument impedance and +48V phantom power for the XLR. Input channels have High/Low EQ and Pan controls and mono channels also have Effects level to vary the amount of internal digital delay effect added for vocals or instruments. An internal player/recorder with backlit display can accept a USB memory stick containing compressed audio files in various formats or alternatively connect to a smart phone via Bluetooth for wireless link. Output is delivered on a pair of balanced XLR connectors and offers very low noise operation for high quality studio or live performances.
Read more
 2 in stock $100.62
Cat: 727397 Rel: 13 May 19 • View all Effects pedals
 
Vintage style boost/overdrive effects pedal
Notes: Rewind to 1968. Famous guitar god uses this pedal to record his first album. Entire planet goes nuts. Inexplicably, the pedal then disappears. Until now. Danelectro resurrects this awesome, incredibly organic sounding pedal. 6 position "Break Up" control takes your guitar signal and slams the front of your amp with increasing punch. Positions 1 through 3 are ear-friendly and have "leave on all the time" potential. Positions 4 through 6 grab you and knock you back against the nearest piece of concrete. But in the most pleasant way. Caution: Do not listen to this... unless you want it to be your life companion.
Read more
 1 in stock $113.68
Cat: 727399 Rel: 13 May 19 • View all Effects pedals
 
Vintage style fuzz effects pedal
Notes: This 50 year old is just hitting its stride. Over the top Fuzz with super hot Octave effect. A mint example will cost you plenty. But it still will not sound half as good as this. We amped the gain and added EQ. Delicious harmonics with super "out front" octave. Sculpt setting scoops mids and boosts bass for outrageous "in your face" tone. Such Fun!
Read more
 1 in stock $113.68
Cat: 738613 Rel: 09 Jul 19 • View all Synth modules
 
Quad voltage-controlled mixer with 4 individual VCA's - 18HP
Notes: Module A-135-1 is a quad voltage controlled mixer. It is made of 4 independent linear VCA's. The VCA outputs are mixed to a common output. For each VCA the following inputs and controls are available: audio input with attenuator, control voltage input with attenuator, gain (pre-amplification). The VCA's are realized with high-quality CEM VCA's (CEM3381 for version 1 and SSM2164 for version 2).

Applications: voltage controlled mixing of up to 4 audio signals with separate control voltages (e.g. delivered by LFO's, ADSR's, Random, Shepard generator, MIDI-to-CV interface or other control voltage sources). In connection with the Morphing-Controller A-144 the soft fade-over of 4 audio signals with only one control voltage is possible.

Inputs: 4 x Signal in, 4 x CV In
Output: Signal Out, Version 2 in addition: 4 x Single Out
Controls: 4 x Signal In Attenuator, 4 x CV Attenuator, 4 x Initial Gain
Read more
 1 in stock $138.50
Cat: 738636 Rel: 09 Jul 19 • View all Synth modules
 
Simplistic quad LFO module with intuitive front panel - 14HP
Notes: Module A-143-3 is a low-cost four-fold modulation oscillator, often called LFO (low frequency oscillator). Like the other modules of the A-143 series (A-143-1 and A-143-2) not a very "exciting" module, just a bread-and-butter device and a simple demon for work. The module contains four simple LFOs. Each LFO is equipped with three waveform outputs: triangle, rectangle and rising sawtooth. The frequency of the sawtooth output is twice the frequency of the other outputs. A three-way switch is used to select one of three frequency ranges mid-low-high, spanning from about two cycles per minute at the lowest, to moderate audio frequency at the highest (about 5 kHz).

If other waveforms or additional LFO features are required (e.g. reset input, adjustable waveform, voltage controlled frequency) the LFO modules A-145, A-146 and A-147 are available.
Read more
 1 in stock $117.94
Notes: The A-100LC1v is a smaller version of the A-100LC3 with 48 HP of space. It is made out of raw wood, a black coating gives the Eurorack frame a vintage look. The built-in power supply, type A-100SSB, delivers up to 380 mA at +12 V and -12 V as well as 100 mA at +5 V.

The A-100LC1v comes equipped with one 48 HP measuring row for 3U modules. Its power supply features eight connectors for oscillators, filters and so forth. The case is connected to the grid via an IEC power socket.
Read more
 2 in stock $143.91
Cat: 745794 Rel: 10 Sep 19 • View all Synth modules
 
3-way logic module featuring two internal signal inverters - 8HP
Notes: Dual logic module with 3 inputs for each unit. The logical states of the inputs ("1" = high / "0" = low) are linked together in 3 ways: AND, OR, EXOR (exclusive OR). The three functions are available simultaneously at three outputs with LED display of the output states.

Additionally, two inverters are available to obtain the inverted functions NAND, NOR and NEXOR. The sockets of each triple unit are "normalized", i.e. the switched contact of socket 2 is connected to input 1 and the switched contact of socket 3 is connected to input 2. Provided that no plug is inserted into socket 1 resp. socket 2 the socket is connected to the input above it. This simplifies the usage of the module when only 2 signals are combined, e.g. the logic functions AND and OR have different neutral input levels ("1" is the neutral state for AND, "0" is the neutral state for OR).

In case of a fixed input level for the unused input one of the functions (AND or OR) would work no longer.

Applications: combination of digital signals of the A-100 (e.g. gates, clocks, triggers), e.g. to obtain "gated" clocks or certain rhythmic patterns.
Read more
 1 in stock $108.20
Cat: 738619 Rel: 09 Jul 19 • View all Synth modules
 
Voltage controlled envelope generator, standard edition - 14HP
Notes: The A-141-2 module is an ADSR envelope generator with voltage controlled attack, decay, sustain and release parameters. Other features include LFO functionality as well as digital end-of-attack and end-of-release outputs. Besides positive and inverted outputs there is an output with voltage controlled amplitude available.

Attack, Decay, Sustain and Release parameters of the A-141-2 can be adjusted manually as well as via control voltages. The CV inputs come equipped with attenuators. In addition, a Comm-CV socket was implemented. Control voltages fed to this input influence all time parameters (A, D and R) simultaneously. Thus, it is possible to make high pitched notes shorter and more percussive. - Just like the behaviour of many acoustic instruments. The time range of the envelope goes from 50 microseconds to six seconds. Using a toggle switch, it is possible to increase these values by a factor of ten (500 us to 60 s) or a factor of hundred (5 ms to 10 min). To activate the envelope, there are gate and retrigger inputs.

The A-141-2 is equipped with a normal and an inverted output. Both connectors work with a fixed level. Furthermore, there is a third, variable output. Here, before reaching the out socket, the envelope signal is fed to a voltage controlled VCA. - Perfect for velocity CV signals. A jumper on the circuit board allows you to choose between a unipolar and a bipolar mode of operation. Other jumpers make it possible to normalize the CV inputs.

Last but not least, there are two digital outputs called EOA and EOR, which emit a gate signal after the attack respectively release phase. This is useful for delayed triggering of other envelopes. By connecting EOA or EOR output to the gate input, you can make the A-141-2 oscillate like a LFO. Adjustments to the envelope times change the frequency and waveform. If you connect the Attack CV input to the inverted output or the Decay respectively Release CV input to the normal output, you can alter the curve characteristics.
Read more
 1 in stock $120.10
Cat: 738620 Rel: 09 Jul 19 • View all Synth modules
 
Voltage controlled envelope generator, vintage edition - 14HP
Notes: The A-141-2 module is an ADSR envelope generator with voltage controlled attack, decay, sustain and release parameters. Other features include LFO functionality as well as digital end-of-attack and end-of-release outputs. Besides positive and inverted outputs there is an output with voltage controlled amplitude available.

Attack, Decay, Sustain and Release parameters of the A-141-2 can be adjusted manually as well as via control voltages. The CV inputs come equipped with attenuators. In addition, a Comm-CV socket was implemented. Control voltages fed to this input influence all time parameters (A, D and R) simultaneously. Thus, it is possible to make high pitched notes shorter and more percussive. - Just like the behaviour of many acoustic instruments. The time range of the envelope goes from 50 microseconds to six seconds. Using a toggle switch, it is possible to increase these values by a factor of ten (500 us to 60 s) or a factor of hundred (5 ms to 10 min). To activate the envelope, there are gate and retrigger inputs.

The A-141-2 is equipped with a normal and an inverted output. Both connectors work with a fixed level. Furthermore, there is a third, variable output. Here, before reaching the out socket, the envelope signal is fed to a voltage controlled VCA. - Perfect for velocity CV signals. A jumper on the circuit board allows you to choose between a unipolar and a bipolar mode of operation. Other jumpers make it possible to normalize the CV inputs.

Last but not least, there are two digital outputs called EOA and EOR, which emit a gate signal after the attack respectively release phase. This is useful for delayed triggering of other envelopes. By connecting EOA or EOR output to the gate input, you can make the A-141-2 oscillate like a LFO. Adjustments to the envelope times change the frequency and waveform. If you connect the Attack CV input to the inverted output or the Decay respectively Release CV input to the normal output, you can alter the curve characteristics.
Read more
 1 in stock $142.82
Cat: 738649 Rel: 10 Jul 19 • View all Synth modules
 
Multi-function module with LFO, switchable VCA, & VC delay - 8HP
Notes: Module A-147-2 is the successor of the VCLFO A-147 but offers much more features than the predecessor. The module is made of these sub-units:

- VCLFO: voltage controlled low frequency oscillator
- VCA: voltage controlled amplifier, switchable to voltage controlled polarizer
- VC delay unit: voltage controlled linear attack envelope (only one parameter: attack) for delayed LFO operation in combination with the VCA (e.g. delayed vibrato/tremolo)

LFO: The voltage controlled LFO has the waveforms Triangle, Sine, Sawtooth and Rectangle available and features a Reset/Sync input. Triangle/Sine and Rectangle are displayed by means of dual-colour LEDs (probably red/green), Sawtooth has a unicolor LED available (probably blue). The output levels are about -4V...+4V for Triangle, Sine and Rectangle. The Sawtooth level is about 0...+8V. The CV control can be switched to attenuator or polarizer ("CV Mode" switch). In polarizer mode the CV inputs affects the frequency in the reverse manner when the CV control is left from the centre position. In the centre position CV has no effect and right from the centre the control works like a normal attenuator. The frequency range (without external CV) is from about 0,005 Hz (i.e. about 3 minutes per period) to 200 Hz (with external CV max. frequency about 1kHz). In addition a ultra-low mode can be activated by means of an internal jumper. When the ultra-low jumper is set a fixed voltage is connected to the switching contact of the "LFO CV" socket. In polarizer mode of the CV control that way extremely low frequencies (up to one hour period and more) are possible. For this a jumper has to be installed on the pin header JP6. In the factory a dummy jumper is installed on the pin header JP7 "Dummy". JP7 has no function and is used only for "parking" of the jumper. Simply remove the jumper from JP7 and plug it on JP6. JP6 is located behind the CV control.

VCA: This is a linear VCA that can be switched to "normal" VCA (i.e. kind of a voltage controlled attenuator) or voltage controlled polarizer ("VCA Mode" switch). In the "normal" VCA mode amplification +1 is achieved with about +5V control voltage. In polarizer mode the amplification ranges from about -0.5 (i.e. inverted signal with about 50% level) with 0V CV to +0.5 (i.e. non-inverted signal with about 50% level) with +5V CV. With about +2.5V CV the signal is suppressed. Details about the functioning of a voltage controlled polarizer can be found in the description of the module A-133. In this mode the VCA can be treated also a DC coupled ring modulator (similar to A-114).

The VCA of the A-147-2 has three sockets available: "In" (signal input), "Out" (signal output) and "CV" (control voltage input).

The Triangle Output of the LFO is normalled to the VCA signal input by means of the switching contact of the "VCA In" socket. If another LFO waveform (or any other signal) should be processed by the VCA the corresponding signal has to be patched to the "VCA In" socket. The VCA can be used also independently from the LFO and the Delay CV. In this case the VCA sockets In, Out and CV have to be patched accordingly. The VCA can be used also as waveshaper for the LFO signals (e.g. by patching VCA In and VCA CV to different LFO signals, if necessary via attenuator A-183-1 or offset generator/attenuator A-183-2).

Attack/Delay: The third sub-unit of the module is a simple, voltage controlled envelope generator that has only the parameter "Delay" (or Attack) available. This unit generates a linear increasing voltage that starts from 0V after each Delay Reset until it reaches about +5V. Then the voltage remains at +5V until the next Delay Reset occurs. The inclination or gradient is controlled by the manual Delay control and the Delay control voltage ("Delay CV" input). The waveform is linear, the control scale is exponential. The output voltage is displayed by a green LED and available at the "Delay Out" socket.
Read more
 1 in stock $128.76
Cat: 745776 Rel: 09 Sep 19 • View all Synth modules
 
12HP random voltage generator for Eurorack, with 4 CV outputs
Notes: Module A-149-1 is the first module of the A-149-x range. In this group we present by popular request several functions of Don Buchla's "Source of Uncertainty 265/266" (SOU) modules that cannot be realized with existing A-100 modules. Many functions of Buchla's 265 and 266 SOU can be realized with existing A-100 modules. For details please refer to A-100 patch examples.

Module A-149-1 has available four different analogue random control voltages that are generated in different ways.

The "Quantized Random Voltages" section has available 2 CV outputs: "N+1 states" and "2N states". N is an integer number in the range 1...6 that can be adjusted with the manual control (Man N) and an external control voltage CVN with attenuator. Whenever the rising edge of the input clock signal (Clk In) appears a new random voltage is generated at the N+1 resp. 2N output. The N+1 output is capable to generate N+1 different voltage levels (or states), the 2N output up to 2N different states. If for example N is set to 4 the N+1 output generates up to 5, the 2N output 16 different states. The voltage steps of the 2N output are adjusted to 1/12 V in the factory. Consequently, exact semitones can be obtained in combination with a VCO. The voltage steps of the n+1 output are adjusted to 1.0 V in the factory corresponding to octave intervals in combination with a VCO. For each output a trimming potentiometer is available on the pc board that enables the user to select other voltage steps for the output in question.

Even the "Stored Random Voltages" section has 2 stepped CV outputs available: one with even voltage distribution of the max. 256 output states and second one with adjustable voltage distribution probability. The distribution probability is adjusted by a manual control (Man D) and an external control voltage CVD with attenuator. With the control set fully counter-clockwise most of the random voltages will be low magnitude but even medium and high magnitude voltages may appear but with smaller probability. As the control is turned to the right (or a positive control voltage appears at the CVD input) the distribution moves through medium to high magnitude voltage probability. The symbol at the lower jack socket shows this coherence graphically. The voltage range is 0...+5V for both outputs of the "Stored Random Voltages" section. For each output a trimming potentiometer is available on the pc board that enables the user to select another voltage range for the output in question.

The A-149-1 can be extended by 8 random digital voltages with the A-149-2 Digital Random Voltages module.
Read more
 2 in stock $107.12
Cat: 745781 Rel: 09 Sep 19 • View all Synth modules
 
Complex switch/multiplexer unit - 16HP
Notes: Module A152 is a very useful switching and T&H module. It combines a voltage addressed 1-to-8 multiplexer and 8 fold T&H that can be used as kind of an analogue shift register too. The active in/output is displayed by a LED. The digital output of the currently addressed step outputs "high". The remaining digital outputs are low.

Instead of voltage control even clock/reset controlled addressing of the active step is possible. The rising edge of each clock signal causes an advance to the next state. The rising edge of the reset signal resets to step 1.

The sum of the voltages coming from the manual Address control and the CV input define the currently addressed step of the 3 sub-devices. If the module is controlled by clock and reset the control voltage has to remain unchanged as the CV control has priority over the clock/reset control (e.g. simply turn the CV control fully counter-clockwise and do not touch the Address control knob).

Sub-device #1 is the bidirectional 8-fold multiplexer (kind of an electronical 8-fold rotary switch). Bidirectional means that it works into both directions like a mechanical rotary switch: the common socket may work as an output that is connected to one of the 8 inputs that are e.g. connected to modulation or audio sources. But the common socket may even function as input. In this case the signal applied to the common socket is output to the currently addressed single socket. The voltage range of the in/outputs to be switched is the full A-100 voltage range -12V....+12V. All A-100 signals can be switched without any restrictions.

Sub-device #2 is the addressed 8-fold T&H. The signal at the common T&H input is connected to the addressed T&H output. As soon as a new output is addressed the last voltage is stored at the output (Track&Hold function). The T&H section of the A-152 allows the emulation of the "toggling T&H" function of the Buchla module 266 "Source of Uncertainty". Only the first two T&H outputs of the A-152 are required for this application. This unit can be used also as kind of an analogue (shift) register. The difference to a "real" analogue shift register is that the sampled output voltages are not shifted to the next output but remain allocated to the same output. But in some cases (e.g. controlling the pitch of 3 VCOs by 3 output voltages of the A-152) the result is the same.

Sub-device #3 is the digital output section. The digital output of the currently addressed turns to "high". All other digital outputs are low. The digital outputs can be used to trigger e.g. envelope generators or to control the reset input in the clocked mode to reduce the number of addressed stages.
Read more
 1 in stock $125.51
Cat: 742581 Rel: 09 Jul 19 • View all Synth modules
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Module A-135-1 is a quad voltage controlled mixer. It is made of 4 independent linear VCA's. The VCA outputs are mixed to a common output. For each VCA the following inputs and controls are available: audio input with attenuator, control voltage input with attenuator, gain (pre-amplification). The VCA's are realized with high-quality CEM VCA's (CEM3381 for version 1 and SSM2164 for version 2).

Applications: voltage controlled mixing of up to 4 audio signals with separate control voltages (e.g. delivered by LFO's, ADSR's, Random, Shepard generator, MIDI-to-CV interface or other control voltage sources). In connection with the Morphing-Controller A-144 the soft fade-over of 4 audio signals with only one control voltage is possible.

Inputs: 4 x Signal in, 4 x CV In
Output: Signal Out, Version 2 in addition: 4 x Single Out
Controls: 4 x Signal In Attenuator, 4 x CV Attenuator, 4 x Initial Gain
Read more
 1 in stock $131.80
Cat: 745787 Rel: 10 Sep 19 • View all Synth modules
 
Voltage-controlled clock multiplier with CV or manual control - 4HP
Notes: Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock signal is available at the socket Clock Out. According to the position of the Mode switch different clock multiplying factors are assigned to the control voltage. With 0V CV no clock output is generated. This state is indicated by "all LEDs off". With increasing CV integer factors (left position of the mode switch), power of two factors (middle position) or a mix of both (right position) are obtained. Nine LEDs are used to show the currently selected multiplying factor. In addition two LEDs are used to display the incoming and outgoing clock signal.

A manual control is used to adjust the clock multiplication factor manually without the need of an external control voltage. The voltage generated by this control ("Manual") is normalled to the CV In socket. As long as no plug is inserted into the CV In socket the clock multiplication factor is adjusted by means of the manual control knob and displayed by the LEDs. For dynamic applications (like the ratcheting function described below) the manually generated CV is overwritten by the external CV which has to be fed into the CV In socket.

The module can be used for all kind of clock multiplying applications. One important example is the generation of so-called ratcheting sequences. The band Tangerine Dream is famous for this kind of sequences. A normal sequencer generates only one gate signal per step. A ratcheting sequence may have also more than one gate pulses per step. This function can be obtained by using the A-160-5: one CV output of the sequencer is used to define the number of gate pulses per step. If the control of the step in question is fully CCW the generated CV is 0V and no gate signal is generated (mute of the step). When the control of the step in question is turned clockwise one, two or more gate pulses are generated depending upon the position of the mode switch and the voltage generated by the CV at this step.

Technical note: Due to the nature of clock multiplying it takes a few input clock pulses until the clock output is stable. One has to average a few input clock pulses to generate the multiplied clock output signal. Even when the input clock frequency changes it will take a few cycles until the output clock signal is correct as the module cannot foresee the future of the clock input signal. The generated clock output signal is derived from the last few cycles of the clock input signal. Consequently the module should be driven only by a clock signal with constant or slowly changing frequency.
Read more
 1 in stock $103.87
Cat: 577757 Rel: 10 Sep 19 • View all Synth modules
 
Dual quantizer for CV's, converting a continuous positive input voltage into a stepped output voltage - 8HP
Notes: Module A-156 is a Dual Control Voltage Quantizer. A quantizer converts a continuous control voltage in the range 0...+10V into a stepped output voltage in the same voltage range (i.e. only certain voltages occur). Normally 1/12 V steps are used to obtain semitone steps. Quantizer 2 of the A-156 allows has more sophisticated quantizing modes like major scale (i.e. only voltages corresponding to the major scale), minor scale, major chord, minor chord, fundamental + fifth and addition of seventh or sixth when chords are selected. Only those voltages appear at the CV output which comply with the selection rule (e.g. minor chord with seventh). The mode setting of quantizer 2 is done with 3 switches (1-0-1 type with middle position). From the factory quantizer 1 is working in the semitone mode. But there is a jumper on the pc board that can be changed so that even quantizer 1 uses the same scale as quantizer 2.

For each quantizer the following in/outputs are available:

- Control voltage input (CV In): The input for the continuous voltage to be quantized
- Control voltage output (CV Out): The output of the quantized voltage
- Trigger input (Trig.In): If this jack is left open the quantizer is working permanently. If a rectangle voltage is applied quantisation happens only at the rising edge of the signal (e.g. from an LFO or MIDI-to-Sync interface). Thus the quantizing can be synchronized with other events
- Trigger output (Trig.Out): Whenever a quantisation happens (i.e. a new voltage is generated at the CV Out) a positive pulse occurs at this output. It may be used to trigger an envelope generator (ADSR) or for triggering other modules (sequential switch A-151, trigger divider/sequencer A-160/161, trigger delay A-162, ...). If none of these functions are used the jack is left open

On top of that the A-156 is provided with a common transpose CV input having an additive effect on both quantizers. This input is quantized in semitone steps. A typical application is the transposition of a sequence generated by the A-155 by a second control voltage (e.g. coming from the MIDI-CV interface A-190).

Typical applications:

- Quantizing the CV sequence generated by an A-155 (semitone, only major scale, only minor scale and so on)
- Quantizing the voltage coming from the Trautonium Manual / Ribbon Controller A-198, Theremin A-178 or Light-to-CV module A-179 to get accurate semitones or major/minor scale tones
- Arpeggio-like effects with LFO, random, noise, envelope generators as CV sources (for negative or symmetrical voltages an offset must be added, e.g. with the offset/attenuator module A-129-3, to obtain positive voltages for the A-156 input)
Read more
 1 in stock $123.35
Cat: 577767 Rel: 10 Jul 19 • View all Synth modules
 
Voltage-controlled 24 dB low-pass filter - 8HP
Notes: Module A-120 is a voltage controlled low-pass filter, which filters out the higher parts of the sound spectrum, and lets lower frequencies pass through. The Cut-Off Frequency determines the point at which filtering takes effect. You can control this manually, or by voltage control (filter modulation, for instance by an LFO). Three CV inputs are available, and the sum of the voltages from these affects the filter cut-off.

The module is based on a so-called "transistor ladder" design, with a cut-off slope of -24 dB/octave, as in various Moog synthesizers. That's what gives it its classic, legendary Moog sound.

Resonance (or Emphasis) is adjustable all the way up to self-oscillation - in which case the filter behaves like a sine wave oscillator.
Read more
 1 in stock $107.12
Cat: 745789 Rel: 10 Sep 19 • View all Synth modules
 
Voltage-controlled clock multiplier with CV or manual control - 4HP
Notes: Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock signal is available at the socket Clock Out. According to the position of the Mode switch different clock multiplying factors are assigned to the control voltage. With 0V CV no clock output is generated. This state is indicated by "all LEDs off". With increasing CV integer factors (left position of the mode switch), power of two factors (middle position) or a mix of both (right position) are obtained. Nine LEDs are used to show the currently selected multiplying factor. In addition two LEDs are used to display the incoming and outgoing clock signal.

A manual control is used to adjust the clock multiplication factor manually without the need of an external control voltage. The voltage generated by this control ("Manual") is normalled to the CV In socket. As long as no plug is inserted into the CV In socket the clock multiplication factor is adjusted by means of the manual control knob and displayed by the LEDs. For dynamic applications (like the ratcheting function described below) the manually generated CV is overwritten by the external CV which has to be fed into the CV In socket.

The module can be used for all kind of clock multiplying applications. One important example is the generation of so-called ratcheting sequences. The band Tangerine Dream is famous for this kind of sequences. A normal sequencer generates only one gate signal per step. A ratcheting sequence may have also more than one gate pulses per step. This function can be obtained by using the A-160-5: one CV output of the sequencer is used to define the number of gate pulses per step. If the control of the step in question is fully CCW the generated CV is 0V and no gate signal is generated (mute of the step). When the control of the step in question is turned clockwise one, two or more gate pulses are generated depending upon the position of the mode switch and the voltage generated by the CV at this step.

Technical note: Due to the nature of clock multiplying it takes a few input clock pulses until the clock output is stable. One has to average a few input clock pulses to generate the multiplied clock output signal. Even when the input clock frequency changes it will take a few cycles until the output clock signal is correct as the module cannot foresee the future of the clock input signal. The generated clock output signal is derived from the last few cycles of the clock input signal. Consequently the module should be driven only by a clock signal with constant or slowly changing frequency.
Read more
 1 in stock $102.79
Cat: 719369 Rel: 06 Jun 19 • View all Effects pedals
 
Volume envelope manipulation with adjustable Decay & Attack times
Notes: The circa-1980 Electro-Harmonix Attack Decay is a sought after prize among vintage pedal aficionados. Originally called a Tape Reverse Simulator, it’s known for producing volume and reverse swells, backward tape sounds, artificially short staccato notes and bowed instrument effects. The new Attack Decay reinterprets the classic and keeps its cool factor, but adds some modern features for convenience and enhanced functionality.

It can produce a single volume envelope like the original, or, with Poly engaged, put separate volume envelopes on each note you play. The built-in Harmonix fuzz is now a fully controllable distortion with gain, tone and volume controls. The effects loop allows the musician or sound designer to place the volume envelope onto whatever signal is present at the Return jack. Expression pedal/CV input and three user presets give the user total control over their Attack Decay!
Read more
 2 in stock $130.93
Cat: 730043 Rel: 14 May 19 • View all Effects pedals
 
Deluxe switching box for electric guitar with True Bypass
Notes: The Switchblade Pro is our deluxe switching box featuring true mechanical bypass, soft switching, high quality and low noise buffers, volume controls for all input signals, high headroom and a multitude of possible configurations for all your signal routing needs. This compact pedal is a versatile and indispensable tool!
Read more
 1 in stock $126.60
Cat: 745521 Rel: 16 Jul 19 • View all Effects pedals
 
B-STOCK: Item refurbished, repaired and in perfect working order.
Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


EHX's Tri Parallel Mixer is a powerful effects creation and mixing hub. Three separate FX loops with flexible controls allow for multiple configurations, as follows:

- Run up to three FX Loops in parallel and create sounds that are not possible by connecting effects in series.
- Switch seamlessly between FX Loops in XOR mode
- Send one instrument out to three separate amplifiers
- Mix three instruments into a single output.

The Tri Parallel Mixer is surprisingly compact considering the level of functionality it provides, while its intuitive controls and I/O make it easy to operate. The Tri-Parallel Mixer comes with an EHX 9.6DC power supply.
Read more
 1 in stock $130.88
Cat: 738558 Rel: 16 Jul 19 • View all Effects pedals
 
3-way FX pedal switcher & mixer
Notes: EHX's Tri Parallel Mixer is a powerful effects creation and mixing hub. Three separate FX loops with flexible controls allow for multiple configurations, as follows:

- Run up to three FX Loops in parallel and create sounds that are not possible by connecting effects in series.
- Switch seamlessly between FX Loops in XOR mode
- Send one instrument out to three separate amplifiers
- Mix three instruments into a single output.

The Tri Parallel Mixer is surprisingly compact considering the level of functionality it provides, while its intuitive controls and I/O make it easy to operate. The Tri-Parallel Mixer comes with an EHX 9.6DC power supply.
Read more
 1 in stock $138.51
Cat: 745617 Rel: 17 Sep 19 • View all Synth modules
 
10HP filter module based on the original parts of a well known Russian Synth
Notes: The Polivoks Filter Module, from Elta Music, utilizes the classic Soviet filter chip for a unique and iconic filter tone, and brings it to the Eurorack modular format. It provides two CV inputs with individual depth pots for ultimate control over cut-off frequency. One input with sensitivity control and four outputs are available simultaneously - lowpass, bandpass, highpass and notch filter types.

Width: 10HP
Current: 20mA
Read more
 2 in stock $143.91
Cat: 734891 Rel: 15 Oct 19 • View all Synth modules
 
Portable 2HP power module for compact skiff cases with dual passive mults
Notes: The power module from Endorphin.es is a module for the power supply of smaller modular systems such as skiff cases up to 104 TE width. The module consumes DC power between 12 and 20 volts from an external power supply unit. Voltages of up to +1000 mA and -700 mA are output, also depending on how strong the connected power supply is. In addition, there are two passive multiples.
Read more
 2 in stock $117.94
Cat: 725949 Rel: 15 Apr 19 • View all Synth module accessories
 
3U 40HP compact skiff case including PSU
Notes: The Mini Case offers 40 HP for mounting modules. A power supply is built-in.

208 mm long x 45mm deep.

PLEASE NOTE: Comes with EU 2 pin plug only - UK adapter may be required.
Read more
 2 in stock $115.77
Cat: 732851 Rel: 22 Jul 19 • View all Synth modules
 
Compact bucket brigade delay module - 3HP
Notes: Pico BBD is surprisingly great sounding (we were surprised ourselves), full analogue 4092 stage bucket brigade delay module; the smallest BBD in Eurorack. Besides nice and clean flanger and delay effects, at full CW settings of TIME and feedback knobs it can produce extreme sonic artefacts. Tweak knobs and enjoy!
Read more
 5 in stock $136.88
Cat: 732849 Rel: 10 Sep 19 • View all Synth modules
 
Compact & flexible looping AD/ASR envelope generator - 3HP
Notes: Erica Pico VC EG is versatile looping AD/ASR envelope generator with voltage control over attack and decay times. It has automatic Trigger/Gate detection, as well as "drone mode" - at full CW setting of the Decay knob, the envelope is full open. In the LOOP mode you can retrigger envelopes for even more interesting modulations.
Read more
 2 in stock $102.80
Cat: 732855 Rel: 10 Sep 19 • View all Synth modules
 
Expanded version of the popular Yocto (808) cowbell
Notes: Latvian modular specialists Erica take on the 808 cowbell. Based on the classic sound, reinvented for Eurorack with tune and decay controls plus tuning CV and accent inputs.

Supplier notes:
Erica Synths Cowbell module is an extended, modular version of Yocto (808) cowbell. For more sonic versatility we have added Tune and Decay controls, as well as Tune CV with an attenuator for nice vibratos. The module is developed in collaboration with a French company e-licktronic.
Read more
 3 in stock $116.85
Cat: 732843 Rel: 08 Oct 19 • View all Synth modules
 
Vactrol based low pass gate - 3HP
Notes: Erica Pico LPG is our take on classical Don Buchla LPG designs. We use vactrols in the circuit for that signature sound, and we added some more features, like configurable resonance and built-in decay envelope.
Read more
 1 in stock $119.02
Cat: 729407 Rel: 30 Apr 19 • View all Synth modules
 
Two transistor sub-oscillators & lowpass filter - 10HP
Notes: Erica Synths Black Double Bass is unique module that combines two transistor suboscillators (-1 and -2 octaves) and lowpass filter. It does not make sound on its own, but it will turn any VCO or beeper into massive bass sound with CV control over octave mix and cutoff frequency. Sync input that resets suboscillators on incoming pulse, provides even more versatility in sound design. The module can be also provide aggressive distortion, when used with percussive sounds like bassdrums.
Read more
 1 in stock $138.50
Cat: 732846 Rel: 22 Jul 19 • View all Synth modules
 
White noise generator - 3HP
Notes: Erica Pico Noise is a versatile noise and percussion sounds source. It consists of white a noise generator, a resonant VCF to generate various colours of the noise - from extremely dark ones to high pitched resonant sweeps and a VCA/decay envelope generator combination to create range of percussion sounds to emulate hi-hats, cymbals and even sine tone-based percussion, when the resonance is full up.
Read more
 2 in stock $125.51
The Hi Records Singles Collection (remastered) (Record Store Day 2019) (26x7" box set + 56 page hard-back book + Hi Records branded 45 adaptor) (1 per customer)
Cat: FP 1610. Rel: 01 May 19
Soul
  1. I Want To Hold Your Hand (2:23)
  2. What Am I Gonna Do With Myself (2:28)
  3. One Woman (3:09)
  4. Tomorrow's Dreams (2:22)
  5. You Say It (3:00)
  6. Gotta Find A New World (2:28)
  7. Right Now, Right Now (2:51)
  8. All Because (I'm A Foolish One) (2:45)
  9. I Can't Get Next To You (3:52)
  10. Ride Sally Ride (2:26)
  11. Drivin' Wheel (2:59)
  12. True Love (2:45)
  13. Tired Of Being Alone (2:35)
  14. Get Back Baby (2:17)
  15. Let's Stay Together (3:21)
  16. Tomorrow Dreams (2:24)
  17. Look What You Done For Me (3:06)
  18. La-La For You (3:38)
  19. I'm Still In Love With You (3:09)
  20. Old Time Lovin' (3:19)
  21. You Ought To Be With Me (3:18)
  22. What Is The Feeling (3:48)
  23. Call Me (Come Back Home) (3:03)
  24. What A Wonderful Thing Love Is (3:27)
  25. Here I Am (Come Take Me) (4:19)
  26. I'm Glad You're Mine (2:59)
  27. Livin' For You (2:51)
  28. It Ain't No Fun To Me (3:28)
  29. Let's Get Married (3:23)
  30. So Good To Be Here (2:42)
  31. Sha-la-la (Make Me Happy) (3:04)
  32. School Days (3:13)
  33. L-O-V-E (Love) (3:10)
  34. Wish You Were Here (3:31)
  35. Oh Me, Oh My (Dreams In My Arms) (2:48)
  36. Strong As Death (Sweet As Love) (4:17)
  37. Full Of Fire (3:29)
  38. Could I Be The One (4:14)
  39. Let It Shine (3:17)
  40. There's No Way (3:33)
  41. Keep Me Cryin' (3:09)
  42. There Is Love (3:09)
  43. I Tried To Tell Myself (3:14)
  44. Something (4:26)
  45. Love & Happiness (4:02)
  46. Glory, Glory (2:49)
  47. Belle (3:59)
  48. Chariots Of Fire (3:54)
  49. I Feel Good (3:31)
  50. Feels Like Summer (3:45)
  51. To Sir With Love (4:10)
  52. Wait Here (2:44)
Review: Here's something to set the pulse racing for all those who love Al Green's distinctive brand of soul: a deluxe box set containing re-mastered, replica versions of "45s" released by the singer on Hi Records between 1969 and '78. It's a wonderfully packaged and produced item, with no less than 26 seven-inch singles being joined by a 56-page hardback book and an ultra-limited Hi Records 45 adaptor. The music is, of course, superb, with the singles containing many of Green's most potent, celebrated and well-known works alongside largely forgotten B-sides and lesser-celebrated bonus cuts.
Read more
 in stock $108.20
Cat: 743797 Rel: 12 Sep 19 • View all MIDI keyboards
 
37 mini-key universal keyboard controller
Notes: Three octaves of portable MIDI keyboard to stuff in your rucksack and take anywhere you like. Gig with it. Make music on the bus. Take it on a first date and improvise songs to woo your future partner. These are nearly all good ideas.

Supplier notes:
iRig Keys 2 gives you more ways to connect & control all of your gear, in any situation. With improved compatibility for the latest mobile devices, full MIDI input and output, multiple power options, a stocked software bundle and a stylish new look, this new and improved controller is ready to play when you are.

iRig Keys 2 is a 37-key (3 octave) USB/MIDI keyboard controller with velocity-sensitive keys that connects to all of your devices: iPhone, iPad, Android and Mac/PC as well as any other MIDI compatible device. Packed into an ultra-compact size, it's the perfect way to unleash your creativity on the go.

Control more:
iRig Keys 2 adds MIDI input and output so you can control stand-alone gear like UNO Synth and other analogue synthesizers, UNO Drum and other drum machines, and more. When connected to a computer or mobile device, it acts as a MIDI interface for all your gear, streamlining your rig into one compact unit.

You can run iRig Keys 2 off your computer or mobile device, USB power supply or even USB battery packs, so it's perfect for on-the-go rigs.

Be heard:
Never worry about compatibility issues again. iRig Keys 2 works right out of the box with iPhone, iPad and Mac/PC, plus it's compatible with most Android devices*, even the latest models. A new headphone output lets you connect speakers or headphones, so you're never stuck using your device's built-in speakers.

Whether you want to practice silently or blast through a sound system, iRig Keys 2 has you covered.

Limitless potential:
Best of all, iRig Keys 2 works with hundreds of popular music apps for iPhone, iPad, Android and Mac/PC.

Whether you want to learn to play, practice your chops, compose a song or perform live, and more, there's a never-ending stream of apps waiting to fuel your inspiration.

Convenient control:
iRig Keys 2 hosts a number of useful controls - from modulation and pitch bend wheels, a volume output control, octave up/down buttons, program up/down buttons, a set button, an ALT button, and a data push encoder.

Where to next:
iRig Keys 2 is designed for portability, so it can travel anywhere you do. It's smaller than other 37-key keyboards on the market, and runs off your device, a USB wall charger or USB battery pack, meaning there's no bounds to your creativity. Head outside, get inspired in your hotel room, practice in the classroom - no matter where your musical journey takes you, iRig Keys 2 will be along for the ride.

Cutting-edge software bundle:
iRig Keys 2 includes IK's award-winning Mac/PC sound & groove workstation, SampleTank 4 SE, giving you over 2000 sounds to create cutting-edge tracks right out of the box.

It also unlocks free apps like SampleTank FREE for iPhone iPad, iGrand Piano FREE for iPhone, iPad and Android, and iLectric Piano FREE for Android.
Read more
 9 in stock $107.13
Eras: Vinyl Collection Part IV (limited gatefold 180 gram 9xLP box (sides 4 & 12 etched) + booklet in slipcase)
Cat: 190758 68221. Rel: 20 Aug 19
Metal
  1. ZTO (1:16)
  2. By Your Command (8:13)
  3. Ziltoidia Attaxx!!! (3:42)
  4. Solar Winds (9:52)
  5. Hyperdrive (3:49)
  6. N9 (5:32)
  7. Planet Smasher (5:49)
  8. Omnidimensional Creator (0:45)
  9. Color Your World (9:58)
  10. The Greys (4:19)
  11. Tall Latte (1:00)
  12. Don't Know Why (7:32)
  13. Travelling Salesman (6:44)
  14. Z2 (4:01)
  15. From Sleep Awake (3:00)
  16. Ziltoidian Empire (6:30)
  17. War Princess (8:17)
  18. Deathray (4:55)
  19. March Of The Poozers (6:27)
  20. Wandering Eye (3:53)
  21. Earth (7:26)
  22. Ziltoid Goes Home (6:23)
  23. Through The Wormhole (3:40)
  24. Dimension Z (6:19)
  25. Z2 (live) (3:47)
  26. From Sleep Awake (live) (3:49)
  27. Ziltoidian Empire (live) (5:59)
  28. War Princess (live) (8:28)
  29. Deathray (live) (4:43)
  30. March Of The Poozers (live) (6:30)
  31. Wandering Eye (live) (3:41)
  32. Earth (live) (8:03)
  33. Ziltoid Goes Home (live) (6:52)
  34. Through The Wormhole (live) (3:43)
  35. Dimension Z (live) (8:10)
  36. Effervescent!/True North (live) (6:08)
  37. Lucky Animals (live) (3:45)
  38. Planet Of The Apes (live) (11:12)
  39. Truth (live) (4:08)
  40. War (live) (6:08)
  41. Soul Driven (live) (1:26)
  42. Planet Smasher (live) (5:51)
  43. Baby Song (live) (5:35)
  44. Vampolka (live) (1:32)
  45. Vampira (live) (4:01)
  46. Addicted! (live) (5:31)
  47. Colour Your World (live) (9:52)
  48. The Greys (live) (4:54)
  49. Hyperdrive (live) (4:44)
  50. Ih-ah! (live) (3:56)
  51. Where We Belong (live) (4:19)
  52. Detox (live) (6:08)
  53. Bend It Like Bender! (live) (3:44)
  54. Live (live) (4:40)
  55. Kingdom (live) (5:14)
  56. Juular (live) (4:06)
  57. Love? (live) (5:23)
  58. Colonial Boy (live) (2:59)
  59. Grace (live) (6:47)
  60. Little Pig (live) (7:38)
 in stock $115.77
Cat: 739049 Rel: 19 Jul 19 • View all Synth modules
 
Headphone amp capable of driving high impedance headphones via a 1/4" stereo Neutrik jack
Notes: Outs enables your modular system to output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces. Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4dBu balanced professional line-level standard or the -10 dbV unbalanced standard.

Headphone monitoring is also provided via a low noise built-in headphone amp (with its own independent level control), capable of driving a wide range of impedances - from studio grade headphones to portable style earbuds.

To use Outs, simply connect the final output of your patch to the 1/8" inputs (where the built-in activity LEDs light up to indicate the presence and intensity of the input signal). The left input is normalled to the right, so you can create a stereo signal from a mono source. Or if you have an Intellijel Mixup, you can remove a jumper from its rear panel, and connect it to the Outs module using the 3-pin link cable included with the Mixup.
Read more
 3 in stock $143.92
Cat: 739050 Rel: 19 Jul 19 • View all Synth modules
 
Three-channel active/buffered attenuverter & summing mixer
Notes: Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch.

Each input is normalled to a built-in precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch. Outputs A and B are also capable of a range of 0-10 / -10 to +10 when using the special function switches.

Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.

In addition, each channel has a "special function" switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.
Read more
 6 in stock $110.37
A Star Is Born (Deluxe Edition) (Soundtrack) (B-STOCK) (limited numbered gatefold gold vinyl 2xLP + CD box set + posters + lithographs + photos + sheet music + journal)
Cat: B 002962102 (B-STOCK). Rel: 28 Jun 19
Soundtracks
  1. Intro (0:21)
  2. Black Eyes (3:05)
  3. Somewhere Over The Rainbow (0:40)
  4. Fabulous French (0:20)
  5. La Vie En Rose (2:59)
  6. I'll Wait For You (0:20)
  7. Maybe It's Time (2:38)
  8. Parking Lot (0:31)
  9. Out Of Time (2:53)
  10. Alibi (3:17)
  11. Trust Me (0:32)
  12. Shallow (3:40)
  13. First Stop, Arizona (0:12)
  14. Music To My Eyes (3:17)
  15. Diggin' My Grave (3:58)
  16. I Love You (0:20)
  17. Always Remember Us This Way (3:30)
  18. Unbelievable (0:32)
  19. How Do You Hear It? (0:17)
  20. Look What I Found (2:52)
  21. Memphis (0:25)
  22. Heal Me (3:16)
  23. I Don't Know What Love Is (2:57)
  24. Vows (0:18)
  25. Is That Alright? (3:09)
  26. SNL (0:13)
  27. Why Did You Do That? (3:05)
  28. Hair Body Face (3:26)
  29. Scene 98 (0:35)
  30. Before I Cry (4:17)
  31. Too Far Gone (1:26)
  32. Twelve Notes (1:04)
  33. I'll Never Love Again (Film version) (4:40)
  34. I'll Never Love Again (extended version) (5:31)
  35. Intro
  36. Black Eyes
  37. Somewhere Over The Rainbow
  38. Fabulous French
  39. La Vie En Rose
  40. I'll Wait For You
  41. Maybe It's Time
  42. Parking Lot
  43. Out Of Time
  44. Alibi
  45. Trust Me
  46. Shallow
  47. First Stop, Arizona
  48. Music To My Eyes
  49. Diggin' My Grave
  50. I Love You
  51. Always Remember Us This Way
  52. Unbelievable
  53. How Do You Hear It?
  54. Look What I Found
  55. Memphis
  56. Heal Me
  57. I Don't Know What Love Is
  58. Vows
  59. Is That Alright?
  60. SNL
  61. Why Did You Do That?
  62. Hair Body Face
  63. Scene 98
  64. Before I Cry
  65. Too Far Gone
  66. Twelve Notes
  67. I'll Never Love Again (Film version)
  68. I'll Never Love Again (extended version)
Review: ***B-STOCK: Box damaged, product unused & in perfect condition***

- Dent/small tear to corner of box

Read more
 in stock $129.84
Items 1 to 50 of 101 on page 1 of 3
1  2  3  »

Filter

Saved Searches
Save current search
Release Date
Close