Search dance music

Notes: Eurorack version of 1010's superb Bluebox. Vast power in 30 HP, with the ability to mix, record and play back in mono and stereo, hook up to a computer over USB for stereo I/O and run effects, all with CV control.

Supplier's Notes:
The bluebox Eurorack edition is the new Eurorack mixer with effects and multichannel recording/playback based on the award-winning bluebox desktop mixer. With the Eurorack edition's USB-C EXT port, you can send 2 channels of audio to and from your computer. Plus, you can control up to 6 mix settings with the 6 CV inputs. Whether recording your Eurorack jams, using it to play stems as backing tracks, or a combination of both - bluebox Eurorack edition will rock your rack!

Connect your eurorack, sampler, drum machine, and synthesizer outputs to 12 mono, 3.5 mm inputs and map them to 12 mono tracks or 6 stereo tracks - all with independent control for recording and playback. Connect your computer to the USB C port to send and receive two channels of audio.

The bluebox Eurorack edition is the ultimate in compact mixing, effects, recording, and playback for Eurorack. Smack it in your rack and hit the road with a self-contained, electronic music powerhouse!

When you purchase a bluebox Eurorack edition, you will receive:

a bluebox Eurorack edition 30 HP Eurorack module
A microSD card with bluebox firmware and pre-loaded project files
two Eurorack power cables
a bluebox Eurorack edition Quick Start guide
two MIDI Adapters

Technical Specs

Dimensions & Power
30 HP
Module dimensions including knobs: 6" x 5"x 1.6"
Depth behind front panel with ribbon cable: 1.0"
Requires the +5V rail which may not be present
on some older racks.
Uses 500-850mA at +5V (depending
on screen brightness), 320 mA at +12V, and 82mA at -12V
Requires two power connections
Capabilities
12 mono tracks, 6 stereo tracks or something in between
Connect to TRS or USB C MIDI for beat syncing effects
Lots of headroom with support for Eurorack levels up to +/-5V inputs and outputs
3 effects: reverb, delay and compressor
Records and plays back 48k, 24-bit audio WAV files
4 band EQ per track
Durable aluminum faceplate
Stream 2 channels of audio in and out over USB C

Inputs and Outputs
12 mono 3.5 mm TS inputs
2 independently controlled 3.5 mm TS output pairs that can be used as 4 mono outputs
1 stereo 3.5 mm headphone output
6 CV Inputs
1 USB C MIDI Device port
1 TRS MIDI Input
1 TRS MIDI Output
1 USB C Ext jack for streaming audio
3.5" touch screen, 4 knobs, 8 navigation buttons and 3 transport buttons

Notes: A characteristically unique take on mixing from Buchla, with six mono inputs and a built-in mic/guitar pre-amp. Each channel can be cued to a monitor mix, while the first and last channels also include voltage-controlled panning.

Supplier's Notes:
The Tiptop 207t is a modern reimagining of the classic Don Buchla 207 Mixer/Preamplifier from the 1970s 200 Series. This stereo mixer comes with a built-in preamp that allows you to boost external instruments and microphones, making it a versatile tool for any modular setup. The 207t also features a six-channel mixer with a variety of signal routing options, including the ability to route channels to the monitor and L&R signal outputs, with per-channel control over loudness and panning.

Each channel has a Mon switch that sends the channel's signal to the monitor outputs, which are always full-volume and summed to mono, making it useful for basic monitoring applications or rudimentary mixing. The Prog switch sends the signal to the L&R signal outputs, with loudness controlled by the Level Adjustment slider and panning determined by the Channel Assignment knobs. The first and sixth channels offer voltage control of panning; these channels are hard-panned when no CV is applied.

The preamp section features a 1/4" input and multiple gain settings, making it suitable for use with external line level instruments, electric guitars, or dynamic microphones. The continuous amplification control provides added flexibility for your audio needs. Finally, the Expansion In is a stereo input that sums to the left and right main outputs, which is great for chaining multiple 207t modules or adding another stereo source at the final output.

While the 207t's functionality may be simple, it is an essential part of any 200t system, serving as the glue that holds everything together. The Tiptop 207t is a fantastic mixer/preamp option that delivers quality sound and reliable performance.

Buchla 207t Features

Mixer/preamp module based on Don Buchla's original 207 design
Six-channel mixer with per-channel level control and panning
Voltage-controllable panning on channels 1 and 6
Manual panning on channels 2-4
Program switches can act as channel mutes for main outputs
Mon switches route signal (in mono) to Monitor output
Expansion input useful for stereo chaining and more
Re-designed preamp for high audio fidelity
Preamp suitable for use with external instruments, electric guitars, dynamic microphones, and more

Eurorack module
28hp wide

Notes: A digital DJ looking for a professional, durable case solution for your Ableton Push 3? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Ableton Push 3, this case is perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight: 0,90 kg / 1.98 lbs
Outer Dimensions (W x H x D): 42.4 x 40.7 x 6.1 cm | 16.7 x 16.0 x 2.4 inch
Inner Dimensions (W x H x D): 38.4 x 32.2 x 4.5 cm | 15.1 x 12.7 x 1.8 inch
Material: Durashock moulded EVA foam

Protection:

Covers main material 600D polyester with 5 mm EVA durashock moulded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks

Extras

Extra space for cables
Heavy duty handle
Easy grip zipper pulls

Fits

Ableton Push 3 + extra cables

Notes: Chroma version of Arturia's flagship KeyStep Pro, a brilliantly versatile sequencer and controller keyboard capable of controlling MIDI synths, drum machines and analogue gear via CV.

Supplier's Notes:
KeyStep Pro Chroma

Sequencing mastermind recoloured

KeyStep Pro Chroma is a special-edition version of the unparalleled 4-track sequencer & keyboard, embellished with a sleek dark grey finish, great-feeling knob caps and customizable track colours. The same all-in-one power, with more edge.

The future is sequenced

Rediscover the controller keyboard that changed the sequencing game, upgraded with a futuristic exterior and supercharged with unique creative functionality.

Chroma aesthetic

Retrofit your musical setup with sleek cyberpunk attitude. KeyStep Pro Chroma features a dark grey casing, vivid blue LEDs, and striking knob caps.

Customize your flow

Exclusive to KeyStep Pro Chroma, you can customize the LED colours for each of your tracks - so every project and composition looks as unique as it sounds.

The must-have sequencer

KeyStep Pro remains the benchmark for hardware & software sequencing and creative performance alike. Chroma is no exception: your sequencing mastermind

Abundant connectivity

From Eurorack modules, to analogue synths and VST's, synchronize all your gear and unleash your creativity in style.

Enterdark mode

Fusing utility with aesthetics, creativity with beauty, and sleek design with vivid colour, KeyStep Pro Chroma delivers next-level performance with pure style.

Exterior

A dark grey shell simultaneously gives this controller space station futurism and classic car attitude.

Lights

Icy blue LEDs illuminate Chroma's metal exterior, while customizable track colours inject perfectly-contrasting vibrancy.

Controls

Complementing the cool grey shell and vivid LEDs, Chroma's controls feature premium, great-feeling stylish caps.

Control hardware, software & DAW at the same time

Looking for the best modular sequencer?

How about a MIDI controller for Ableton? Or a live performance keyboard that can sync all of your favourite synths to a DAW click track? KeyStep Pro's extensive list of controls, connections, and creative functions are designed to tick every box - let's take a closer look:

The ultimate multi-function controller

Command complex hardware setups, entire DAW setlists, modular racks, and more - all with a user-friendly workflow that prioritizes creativity.

KeyStep Pro remains unique and unmatched in its balance of performance-oriented playability, massive connectivity, and creative depth.

Main Features

Unique dark grey design with blue LEDs and stylish knob caps

Customizable track colours

37 note slim keys, velocity and aftertouch sensitive
LED above each key for efficient visual feedback

Four track step sequencer
16 step buttons, up to 64 steps per sequence
Up to 16 notes of polyphony per step

Melodic sequencer
Real-Time recording, step recording, step editing
Pitch, velocity, gate length, time shift and probability for each note
Scale quantization with user scales
Polyphonic CV outputs

Drum sequencer

24 part drum sequencer
Polyrhythm

Performance-oriented sequencer
Forward and two random playing modes
Pattern randomization
Quantized or unquantized recording
Looper

Arpeggiator

7 arpeggiator modes, 5 octave range

What's in the box

Box content

KeyStep Pro unit
Registration card
Quick Start
USB cable
Power supply

Dimensions
Size : 23.2 x 8.2 x 1.5 inches (589 x 208 x 38mm)
Weight : 5.9 lbs. (2.7 Kg)

Notes: Part of Xaoc's Leibniz Binary Subsystem, the updated Drezno ADC/DAC module builds on the original with higher resolution converters, allowing you to use it for pitch quantisation.

Supplier's Notes:
Drezno II is an improved version of the original Drezno module. It is an essential member of the 8-bit Xaoc Devices Leibniz Binary Subsystem. The Leibniz subsystem is a family of modules that operate on 8 binary (two-state, on/off) signals. These signals are arranged as 8 bits of digital data and may represent analogue signals and voltages, or they may be whatever you want them to be (clocks, gates, rhythms, etc.).

Drezno features an ADC (analogue-to-digital-converter) and DAC (digital-to-analogue-converter), allowing it to act as an analog front-end of the system. In other words, Drezno allows one to convert analogue signals and CVs into digital numbers, as well as to obtain analogue signals back from some other digital numbers (or 8 binary signals). Between these two conversions there is a whole universe of digital shenanigans waiting to happen resulting in all kinds of signal transformations and modulations.

Both (ADC and DAC) sections of Drezno can work independently, or they can be linked. Input and output range of analogue signals may be adjusted using Gain and Offset sliders. Individual bit outputs (for the ADC) and inputs (DAC) allow for extensive cross-patching and the creation of complex waveforms and rhythms. A very fast clock (up to 2MHz) at which the conversions are performed may be replaced with any external clock (for each section separately).

Compared to its predecessor, Drezno II uses new converters of much higher resolution which results in much lower noise floor and higher accuracy. The lower bits are much more stable than before. It is easy now to use Drezno for quantizing pitch voltages with accurate results with 128 or 256 semitone steps. Potentiometer ranges are factory calibrated for precise chromatic scale. A new switch on the front panel allows the user to select the calibrated range of 10Vpp or 20Vpp, so that the lowest bit or the second bit correspond to 1 semitone.

Technical details

Eurorack synth compatible
12hp, skiff friendly
Current draw: +80mA/-50mA
Reverse power protection

Notes: Part of 1010's excellent Nanobox series, the Tangerine is a tiny powerhouse sampler. A fresh new approach to sampling, from one-shots to loops, all the way through to four-hour recordings.

Supplier's Notes:
Sweet and Tangy Sampling

The nanobox | tangerine delivers powerful sampling in an ultra portable form factor. With this nanobox, you can add recording, sample playback, clip launching, slicing, and musically intelligent looping capabilities to your desktop or travel rig. With an intuitive touch screen interface, nanobox | tangerine makes easy work of selecting, editing, and tweaking your samples. You can stream large samples of up to 4 GB file size straight from the microSD card. Interact with other musical components via MIDI. Load multi-sample banks with over 500 samples for amazing instrument reproduction. Tweak your configurations to get them just right, then save them to multiple presets for future reuse.

Top features

Play up to 24 stereo polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger stereo samples streaming directly from the microSD card

Play multi-sample banks with up to 16 velocity layers and 576 WAV files loaded in one preset

Configure 8 stereo sample pads per preset as single or multi-samples, clips, slicers, or new recordings

Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio

Trigger samples with the touch screen or MIDI input as one shots or melodic notes

Control how samples start and stop by choosing from one-shot, toggle, gate and piano (New!) launch modes

Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, and MIDI note and channel mapping

Quickly and easily use MIDI mapped controls for more tactile access to common parameters

Record up to 16 sequence layers per preset.

Get into the groove with a fast, fluid, and intuitive workflow

Make music anywhere thanks to a compact and nearly indestructible design

Recording Capabilities

Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Automate recording of a multi-sample bank via MIDI
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer

What is Included:
nanobox | tangerine - Compact Streaming Sampler
MicroSD card with 85 presets and over 1500 wav files
Colour matched USB power cord
Type B TRS MIDI To MIDI 5 Pin DIN adapter
Quick Start Guide

Technical Specs:

Power: USB-C connection 5V, 500mA
3.5mm audio input and output
Maximum input and output level: 2Vrms
DAC and ADC resolution: 24-bit
Internal resolution: 32-bit
Sample rate: 48kHz
MIDI Input: 3.5mm Type A/B auto sensing
MIDI Output: 3.5mm Type B
Clock Input: 1,2, 4, 8, 12 or 24 PPQ selectable
MIDI support: Note On/Off, Velocity, Pressure, Mod Wheel, Aftertouch, CC mappings to common parameters, program changes and clock
H x W x D: 1.5" x 3.75" x 3"
Weight: 0.25 lbs.
2" touch screen, 2 knobs and 4 buttons in a 3.75" x 3" x 1.5" package

Additional information

Weight: 0.65 lbs
Dimensions: 7.75 × 4.85 × 2.25 in

Notes: A mini-modular synthesizer for real-time composing, sound processing, and having fun.

Pluto is compact and portable, with abilities that belie its small size. Five channels of modulation (named for the five moons of Pluto), two voices, two sequencers, a mini-keyboard, and onboard delay make Pluto its own complete sound environment, but it can happily play with all your other gear.

The design of Pluto draws from a legacy of portable electronic instruments, from the Buchla Music Easel to 80's Casio synthesizers. With a focused, approachable interface, Pluto invites exploration.

Features

Portable 2-voice, 2-sequencer patchable synthesizer
Easily create complex, randomized sequences
Low-aliasing digital oscillators, wavetable oscillators
Rechargeable battery
Built-in delay and reverb effects
Mini touch keyboard
Audio input for audio processing
Audio output (stereo headphone, line)
Quantize to preset scales, MIDI, or even audio input
Eurorack-compatible patch signals (5v)
Sync In & Out
MIDI In & Out (TRS, USB)
2 channels CV Out (0-5v, 1v/oct)
USB-C cable included

Notes: A workhorse studio condenser microphone with a warm, silky character, exceptionally low noise and high SPL handling - ideal in a wide range of studio applications.

The World's Most Popular Studio Microphone

Since it launched over 30 years ago, the NT1 has become the world's most popular studio microphone and the go-to for countless creators across the globe - from bedroom musicians and studio professionals to streamers, podcasters and voice over artists. The NT1 Signature Series carries on this legacy, delivering classic studio sound for today's creators.

Iconic Signature Sound

Featuring our stunning HF6 1-inch true condenser capsule, the NT1 Signature Series boasts the same iconic sound signature that its forebears are revered for. Sparkling top end, highly detailed midrange, and rich, warm bass make it shine in almost any recording application you can imagine - from vocals, piano and acoustic guitar to drums, percussion and electric guitar.

Your Mic, Your Way

For the first time in the NT1's 30-year history, this iconic microphone is available in a range of iconic colours. This limited-edition collection features five vibrant colourways alongside the timeless black finish, including red, green, purple, pink and blue.

A True Workhorse

A true workhorse that excels in a wide range of studio applications. With an exceptionally low noise floor and incredibly high max SPL, it captures everything from whispers to drums with the utmost clarity. The perfect all-rounder studio microphone.

Legendary RODE Quality

The NT1 Signature Series is designed and made using the highest-grade components in RODE's precision manufacturing facilities in Sydney, Australia. It's built to last, with a rugged body machined from high-grade aluminium and comes with our industry-leading 10-year warranty, so you can rest assured it will remain your go-to for the long haul.

Premium Accessory Kit

Keep your recordings pristine with the studio-grade shock mount and pop filter included with the NT1 Signature Series, the perfect tools for minimising audio artifacts caused by knocks, rumbles and plosives. It also ships with a premium XLR cable so you can start creating right away - just plug straight into your audio interface or mixer and start recording exceptional audio.

Key Features

Large-diaphragm cardioid condenser microphone
HF6 1-inch true condenser capsule, precision engineered to sub-micron tolerances
Tight cardioid polar pattern for excellent background noise rejection
Classic NT1 sound signature - rich, warm bass, detailed midrange and sparkling highs for exceptional performance in a wide range of studio applications
Smooth frequency response and high sensitivity for incredible balance and clarity
Extremely low noise (4dBA) - the world's quietest studio condenser microphone
High SPL handling capabilities (142dB) for capturing very loud sound sources
Studio-grade shock mount and pop filter and premium XLR cable included
Available in classic black or a range of limited-edition colours, including red, green, purple, pink and blue
Rugged aluminium body with a high-grade finish - incredibly resistant to scuffs and scratches
Industry-leading 10-year warranty
Designed and made in RODE's precision manufacturing facilities in Sydney, Australia

Acoustic & Electrical Specifications

Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100O
Maximum SPL: 142 dB SPL
Equivalent Noise (A-Weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: P48
Analogue Output Connection: 3-pin XLR

Mechanical

Weight (grams): 313

Dimensions (millimetres)
Length: 52
Width: 52
Height: 189

What's in the Box
1x NT1 Signature Series
1x SM6
1x XLR Cable

Notes: The Vermona MEX3 is a midi extension for the meloDICER sequencer and allows the sequencing of synthesizers outside the modular system.

Features:

MIDI output of sequences
Sequences can now be polyphonic with up to three voices
meloDICER can receive MIDI Control Change messages to remotely control all parameters.
All meloDICER controls can send MIDI Control Change messages
Direct synchronisation to a MIDI clock including shuffle conversion (e.g. from a Multiclock)
MeloDICER converts the MIDI real-time messages START, STOP and CONTINUE.
Module width: 4 TE
Power supply via meloDICER

Included in delivery:

MEX3
Connection cable to meloDICER
2 x MIDI cable DIN-3.5mm; 150 cm (Type A)
To use the meloDICER with the MEX3, the latest firmware must be installed. This can be downloaded from the manufacturer's website.

Notes: Meris describe the MercuryX as the most flexible studio reverb pedal ever made. A bold claim, but hear them out. Immense power with eight custom algorithms in a modular architecture. Full stereo with a wealth of programs from lush plates and twangy springs to experimental weirdness.

Supplier's Notes:
The Meris MercuryX takes the heart and soul of Mercury7 and expands it far beyond sci-fi into the highest quality and most flexible studio reverb ever created in a pedal format. Its modular reverb system format breaks the paradigm of pre-set reverb types and inspires new discoveries. MercuryX features the same easy to use UI as LVX, making it immediately intuitive to navigate.

All of Meris' passion for pro audio has made it into both the algorithms and hardware performance of this pedal. MercuryX combines 8 custom Meris reverb algorithms and incorporates those into a modular system architecture that first introduced with the award winning LVX pedal. It features discrete processing elements and control signal modifiers that can be connected as desired for infinite flexibility in crafting custom reverbs.

Here is a deep dive into the 8 different reverb structures in MercuryX. Each Reverb Structure has Gate controls that can be used to dial in a range of gated reverb effects including the classic percussive gate sound, reverse tail reverb sounds, and slow breathing textures.

Similar to the Dry Blend control of the Predelay, each Reverb Structure features a Predelay Blend control that allows you to put some or all of the predelay reflections in parallel with the reverb tank.

Ultraplate - Adapted from Mercury7, Ultraplate is an inspiring and lush plate with a fast build. Use the Ultraplate's flexible decay range to create a wide range of studio textures.

Cathedra - Adapted from Mercury7, Cathedra is a massive and ethereal algorithm with a slow build. Cathedra is perfect for scifi textures and recreating C-beams glittering in the dark near the Tannhauser gate.

Spring - A flexible algorithm that can be voiced to replicate both the amp based reverb sounds and the classic studio spring tanks featured on early recordings.

78 Room - A lively and direct sound. This algorithm is great for transforming static sounding virtual amps into the difficult to capture sound of a great amp live in the room with you. The Room algorithm features a unique infinite mode (Maxed out Decay controls) that interacts with the Tank Mod to provide deep chorused and flanged reflections.

78 Plate - Fast and dense, the 78 Plate algorithm is a good match for beefing up percussion and vocals.

78 Hall - A large hall with a medium build up of reflections. Great for building up ambient walls of sound. The Hall algorithm's extended reflections are a great base for sculpting with the Bass/Mids/Cross controls. Deep rumbling bass caverns and ethereal upper mid emphasized halos of sound are easy to create. Explore the additional sparse mode for the Hall when Diffusion is set Low.

Prism - The Prism Strucure is an dual tank that allows you to build your own geometric rooms by specificying the size and distance and reflectivity. Prism features a highly configurable modulation section which allows different modulation phases per side to further increase the stereo image.

Gravity - The Gravity Structure works by accelerating indivual windows of your signal and stretching them across the horizon.

Notes: The Dual Stereo Gate (DXG) music synthesizer module is a Dual Stereo Low Pass Gate and Mixer. It follows in the footsteps of the QMMG, Optomix, RxMx, DynaMix, and LxD. Unlike its predecessors, the DXG is specifically oriented around mixing stereo signals, making it an important addition to any system containing modules like XPO, QPAS, Morphagene, Mimeophon, and other stereo modules by Make Noise or others.

Unique to the DXG is a new low pass gate circuit that does not use vactrols. This circuit is 100% analogue and its response was arrived at after many months tailoring it to meet or exceed the expectations that have been set by all the vactrol low pass gates that Make Noise has created over the years.

In the past, Make Noise produced the Dynamix module and Dynamics circuit in the 0-COAST, both of which are vactrolless LPGs; however, the DXG is a completely new approach which better implements the gentle single pole filtering of a low pass gate, while also emulating the slow decay and memory of the vactrol based low pass gate. This new circuit makes possible the consistency of response necessary for versatile stereo use, while also keeping the module small and affordable so that it can be a key part of just about any modular system.

As on all of Make Noise's low pass gates, the DXG's Control parameter is used to set both the amplitude and the frequency content of the sound that passes through it. The control parameter tends to open faster than it closes, imparting a subtle decay phase onto any envelope shape that is used to modulate it.

Unlike previous low pass gates made by Make Noise, all the DXG's inputs and outputs are stereo. Each set of inputs is normalled so that the left input can be used for a mono signal, sending a copy to both left and right outputs. The Auxiliary inputs are also a stereo pair with mono normalization. These normalizations allow for the DXG to be used as a simple three channel stereo mixer, with one or two of the channels additionally being used for dynamics control and note event generation. The Aux inputs can be used to chain together larger decentralized mixes using additional DXG modules, or X-PAN, Optomix, modDemix etc.

Features

- Make Noise's first Stereo Low Pass Gate

- Vactrol-free design for classic Low Pass Gate sounds, but with the balance and consistency needed for true Stereo

- Fully Stereo i/o for easy integration into a Stereo-equipped modular synthesizer

- All Left inputs normalled for easy use with Mono signals

- STRIKE Input allows use of Gate signal to trigger Low Pass Gate circuit, creating "plucking" or "pinging" sound from any Gate

- Summing stage with Stereo AUXiliary IN allows for chaining of multiple units, creating larger mixes

- Part of a decentralized mix console integrated throughout the system along with X-PAN, Optomix, XOH, etc.

- Pairs well with XPO, QPAS, Morphagene, Mimeophon, Spectraphon etc.

Width: 8hp
Power:
74mA @ +12V
86mA @ -12V
Module Depth (incl power cable): 43mm

Notes: Pedal version of the excellent Golden Master module, featuring multi-band end-of-chain processing with EQ, compression and mid/side stereo widening effects. Ideal for bass or guitar.

Supplier's Notes:
On-stage mastering

Based on Endorphin.es' Golden Master eurorack module and our experience in electronic live music performances, Endorphin.es developed Golden Master - a multiband processor pedal to deliver high pressure audio for live concerts and venues: sound loud without overloading the master limiter.

Multiband processor consists of EQ, compressor and mid-side

24 bit 96 kHz audio I/O with 32 bit internal processing

Stereo enhancer for each of the 3 bands

High impedance inputs, pseudo-balanced outputs: works also as a DI-box on stage

One knob compressor per band along with global threshold allows you to intuitively achieve results

Dedicated expression pedal for master volume control

Two footswitches let you select presets and bypass with your feet

Notes: 12-voice version of Waldorf's Iridium Core, a compact synth from the same range as the Quantum. Running on the Waldorf OS, the Iridium features a versatile selection of Wavetable, Multi- & Granular-Sampling, Waveform, Kernel FM and Resonator synth engines.

Supplier's Notes:
The Core

Iridium Core provides the core synthesis engine of the Quantum / Iridium platform. It is the heart of Waldorf's most advanced hardware-based synthesis. The essence of forward-looking sound. The Core.

Sonic Explorer

Iridium Core contains 5 synthesis engines: Wavetable, Multi- & Granular-Sampling, Waveform, Kernel FM and Resonator. Combined with a broad selection of digital filter and processing options Iridium Core lets you explore a huge sonic universe of electronic sound. Iridium Core's intuitive and easy graphical interface helps you to keep your flow of creativity.

Wave Traveller

The compact form factor makes Iridium Core an ideal companion to travel with you to all your sonic explorations and performances. It fits well into laptop size bags and in carry on-baggage it leaves enough space to all your other devices you need for your performances.

Driven by Inspiration

Iridium Core comes with a huge collection of more than 1700 factory presets and samples to drive your sonic Wanderlust. Get inspired what the broad and diverse array of sound designers have created to fuel your musical endeavours.

Team Player

Iridium Core integrates into various live performance and studio setups. Its connects with your modular synths, drum machines, sequencers and computers. The compact form factor fits well into your tabletop or space limited setups.

Family Member

Iridium Core shares the same software platform like Quantum, Iridium Desktop & Iridium Keyboard. All instruments are powered by the Waldorf synthesiser OS and will receive joint updates. Thus, the whole family participates from future enhancements and developments.

Specifications

Compatible with the Waldorf Quantum synth engine
Software: Waldorf Synthesis Platform OS

Oscillators
3 Oscillators each capable of 5 synthesis modes:
Wavetable
Waveform (VA)
Particle (Sampling and Granular Sampling)
Resonator
Kernels (up to 6 sub-oscillators which can be interlinked through FM, AM or Wavetable-position at audio rate)

Dual Stereo Filters per voice
True stereo path Dual Digital Filter with independent modes:
12/24dB LP/HP/BP in all combinations
Nave, Largo, PPG, Quantum and StateVariable models
Analyzer displayed in Filter view
Filter curve animation when modulated (optional)
Sophisticated filter routing options with modulatable panning and levels

Digital Former
Filter models like State Variable, Waldorf Nave, Largo and PPG in HP/LP/BP/Notch
Comb filters, Bit-Crusher, various Drives, Ring-Modulation

Modulators
6 Envelopes
6 LFO
Komplex Modulator (LFO/Envelope combination with user-definable shape and morphing)

Mod Matrix
40 slots
Fast assign mode
One additional control amount per slot
Identical Sources and Destinations can be used multiple times until the matrix is full

Effects
5 slots per layer
Various parallel and sequential routing options
Reverb, Delay, Chorus, Phaser, Flanger, Drive, EQ, Compressor, Tremolo

Performance features
Advanced Arpeggiator
Step-sequencer with up to 64 steps for notes and parameters
2x4 button pads assignable to notes or chords
4 user-assignable potentiometers
6 user-configurable macro buttons
Favourites screen for quick patch recall
XY control on touchscreen
Wheels touchscreen for MIDI controls like mod wheel, pitch bend, aftertouch and velocity
MPE capable

Screen
Industrial-grade highly responsive touch screen with Brightness control
1024x600 pixels

Voices
12 voice polyphony
Duo-timbral
Mono, Legato and Unisono modes

Patches
Over 1700 factory patches
Capacity of 7000 patch memory slots (numbers 0000-9999 can be used)
Patches from Quantum and other Iridium variants can be loaded and vice-versa
Category filter for patch list
2.6 GB sample flash memory preloaded with 2 GB factory samples

Connections
Stereo Audio Out: 2x TS jacks
Stereo Audio In: 2x TS jacks
Headphones TRS output with level control
DIN MIDI IN & Out, mini-TRS Type A (two adapters to DIN MIDI sockets included)
USB Type B (device) for MIDI connection to computer
USB Type A (host) for storage media and MIDI devices
MicroSD slot
2 high-resolution CV Inputs which can be used as modulation sources in the Mod-Matrix
Analogue clock In & Out with clock divider settings

Overall
Sturdy metal case
Dimensions: 346 mm wide by 200 mm depth by 64 mm height (including controls)
Weight: 2.2 kg
External Power Supply: Input 100-240 V / AC 50-60 Hz, Output 12 V DC / 3 A

What's In the Box?
Iridium Core Synthesizer
Two MIDI adapters: mini TRS to DIN sockets
Power Supply
Printed Quick Start Guide

Notes: Universal drum synthesizer with roots in the analog world on a swappable oscillator platform

Basimilus Iteritas Alia is a parameterized digital drum voice with its roots in the analogue world. At its heart, the BIA is a simple six-oscillator additive and FM synthesizer with waveform, harmonic spread, and envelope controls. An adjustable noise oscillator and an extreme take on a wavefolder round out its synthesis abilities. Its straightforward controls make sound design fun and performable: create sub-shaking kicks, snares, hats, and unique drum hits with just a few tweaks.

BIA is a classic percussion module but you'll be blown away by how much more it can do. Use it for leads, basslines, or build a whole drum kit with some external CV. Plus, the envelope output means you can use the BIA for shaping and modulating other parts of your patch.

Basimilus Iteritas Alia is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal to check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: A unique analogue take on granular synthesis, inspired by Yannis Xenakis, the Grainity pairs a granular filter with a multimode filter to create new textures and harmonics.

Supplier's Notes:
The Grainity brings a unique and never-heard-before concept to the world of analogue VCF.

While being based on analogue filtering only, the Grainity expands and enriches the sound in creating subharmonics, harmonies, unison, flanging effects and formant filtering all at once.

The module presents two sections, the granular filter itself and a typical multimode filter, each with its own output.

A third output offers a mix of both filter paths. Numerous controls and CV allow a very wide palette of results.

What is the Grainity

Granular?

The word granular was chosen for this filter module in relation to the concept invented by the composer Yannis Xenakis, and which is described as assembling small chops of sounds - he called grains - according to a pattern.

This is exactly what the Grainity does, no more no less ... but, digital control allows doing it in ways that are decades away from what tape and scissors allowed at the time.

Technology wise ...

In the granular section, the incoming sound cycle is determined in order to step through various filtering and phase variations of itself according to predefined patterns called structures.

The controls allow alterations to the cycling phase, cycling frequency offset (tuning), structure selection and frequency division of the filters cycling. This comes in addition to the usual filter frequency and resonance controls.

What the Grainity is not

Technology wise ...

Despite relying on a microprocessor, the Grainity is not a digital audio processor. At any time, the sound remains in the analog domain and goes through analog circuits from in to out.
The digital processor does not convert or generate audio signals; it is there to control the analog circuitry and manage the interface and display.

Sound wise ...

Several digital modules offering granular processing rely on the layering of sound grains, which leads to blurry and cloudy textures.
Layering of the grains is a late addition to the concept of granular synthesis and is not a mandatory feature of the concept.
The Grainity does not use delay lines or sampling memory but is nevertheless true to the foundations of the granular synthesis concept.

The granular VCF in the Grainity is unconventional in that, most of times, it is not filtering the sound in the common expectation of removing something. Typically, the granular process adds more than it removes by expanding both the lower range, creating subharmonics, and the upper harmonic contents in multiples ways.

Dimensions
10 HP
21 mm deep

Current Draw
101 mA +12V
59 mA -12V

Notes: Combining the power of multi-oscillator wavetable synthesis with the percussive detail of sampled sounds, Pianophonic is a powerful hybrid synth engine featuring 8 voices of polyphony. Not limited to Piano sounds, the voice architecture of Pianophonic is extremely versatile and easy to use with the essential controls laid bare on the front panel, and the most significant CV inputs and outputs provided for full integration within eurorack patches.

Taking its inspiration from the wavetable/sampler keyboards of the 90s, Pianophonic revisits a lean and mean approach to digital sound creation but instead with 24bit 48Khz quality and fingertip control of the parameters that really matter.

With a built in SD card and an online re-synthesise utility, allowing users to create their own sound banks, the possibilities for sound exploration are limitless.

Notes: Limited-edition white version of Arturia's ever-popular MiniLab controller, now in its third iteration. Features 25 velocity-sensitive keys, eight RGB pads, eight rotary encoders and four faders.

Supplier's Notes:
MiniLab 3 Alpine White

Ice-cold music maker

MiniLab 3 Alpine White is a music-making controller keyboard with a fresh makeover. Control music software, create your own tracks with inspiring sounds & samples, and get playing with comfy keys & pads - all in dazzling white.

A MIDI controller with a minimalist aesthetic

Rediscover the keyboard controller of choice for today's production pros & beginner music makers alike, decorated with a lush modern aesthetic to elevate any setup.

A fresh all-white look

This mini keyboard controller is going for that ultra-clean, contemporary design vibe with a white exterior, white keys, and white controls.

A fresh all-white look

This mini keyboard controller is going for that ultra-clean, contemporary design vibe with a white exterior, white keys, and white controls.

Easy to use

Explore amazing synth & instrument sounds on your computer, make beats & musical ideas in minutes, and sharpen your production skills - great for beginners.

Everything you need

Play keys, punch in a drum loop, connect to MIDI gear, and get creative with premium musical software included as standard.

Be creative anywhere

MiniLab 3 Alpine White is tiny. It fits perfectly in your lap, in small spaces in your home studio, balanced on top of other gear, and even on an airline tray-table. Don't let a lack of space get in your way. Whenever you get the chance to live out your creativity, this little controller will be ready.

Pint-sized control freak

Small but mighty, MiniLab 3 Alpine White has an expressive, velocity sensitive keyboard, 8 RGB backlit pads, 8 rotary encoders, and 4 faders to put you in total control of your virtual instruments, DAW, and effects. 1 knob is even clickable, letting you navigate menus and select presets right on your controller!

Every sound you need included

What software & sounds do you get with MiniLab 3? From recording software to a library of over 4 million samples, you're totally kitted out for whatever music you want to make.

A Hands-on Experience

Explore the layout, features, and hidden talents of MiniLab 3 in detail, from its quality slim keyboard to its easy-to-use creative commands.

Main Features

Premium Keybed quality

25 high quality note velocity-sensitive slim keyboard

Pads & controls
2 banks of 8 velocity & pressure sensitive pads with RGB backlighting
8 rotary encoders
4 sliders
2 capacitive touch sensors for pitch bend and modulation wheel

Display control
Mini display & clickable browsing knob
real-time feedback on tweaks and controls

Smart features

Built-in arpeggiator
Chord mode
Hold function
Octave up and down buttons
Semitone transpose

Software integration

Seamless integration with all Arturia software instruments, including Analog Lab: select sounds, browse presets and smart-assigned controls
1 DAW preset for automatic integration with any major DAWs
DAW Transport Control with MCU protocol for every other DAWs
Up to 5 user presets for a totally customizable experience
Connectivity

USB-C connects to computers and iPad
MIDI 5-pin DIN output for connection to external instruments, gear
Control input for pedal: sustain, expression, or footswitch
USB powered

Size & weight

Instrument size: 14 x 8.7 x 2 inches (355 x 220 x 50mm)
Instrument weight: 3.3 lbs (1.5 Kg)

Platform specifications

Windows

Win 10+ (64bit)
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost)
3GB free hard disk space
OpenGL 2.0 compatible GPU
ARM processors not supported on Windows

Apple

Mac OS 10.13+
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost) or Apple Silicon CPU
3GB free hard disk space
OpenGL 2.0 compatible GPU

Required configuration

Works in Standalone, VST, AAX, Audio Unit, NKS (64-bit DAWs only).

Work with ASC

An elegant and simple solution to help you install, activate, and update your Arturia software instruments

Notes: The 'Mega Milton' is a smorgasbord of handy all analogue utilities in just 8HP that will greatly extend the functionality of your Eurorack system.

It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analogue white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor.

All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input.

The 'Mega Milton' provides essential classic synthesizer building blocks for patching in any Eurorack system.

Ideal For

Incorporating stereo external sources easily into your Eurorack system.
Signal attenuation and basic mixing in a small space.
Building percussion sounds from an analogue noise source.
Producing clocked random to add interest and variation to patterns and sounds.
Adding gated 303 style slides to patterns.
Creating and Manipulating patterns with Sample and Hold.
Buffering and monitoring voltage across multiple VCOs or other destinations with no drop.

Tech Specs

Supply: +12V 70mA / -12V 70mA
Size: 8HP
Depth: 32mm

Notes: Use this cable to connect your Bluebox to a data source and a power source at the same time. This will allow you to stream audio over USB. The cable has a USB B male connection on one end and two USB B female connections on the other end: red for power and black for data.

Stream Audio Over USB with Bluebox

If you bought a Bluebox for desktop before September 2023, this handy adapter will make it easier to connect your device to a computer. New firmware allows you to send audio from the bluebox to the computer and back.

The adapter splits the power from the USB signal to help avoid noise from your computer. It also enables you to power the device separately in case your computer or hub is not suitable for the demanding power requirements of the Bluebox.

Connect the male end to the USB Power port on your Bluebox. Then connect your bluebox USB B power cable to the red female jack, and a USB B data cable to the black female jack and you are ready to stream audio.

Specs

Length: 3.25", 8.25 cm

Weight: 1.2 oz, 34 grams
Dimensions: 6.5 × 2.5 × 0.75 in

Notes: Introducing the Ergonomic Studio Stand for Ableton Push 3: a game-changer in the world of music production. Designed with your comfort and productivity in mind, this stand is the ultimate solution for those seeking a more immersive and ergonomic music-making experience.

Crafted with precision, the stand offers a sleek and sturdy design that seamlessly integrates with your Ableton Push 3 controller. By elevating your controller to an optimal height and angle, it eliminates the strain on your wrists and neck, allowing you to focus on your creativity without any discomfort.

One of the standout features of this stand is its ability to enhance your visual experience. With a specially designed screen mount, it brings the Ableton Push 3's display closer to your line of sight, ensuring crystal-clear visibility of every detail. No more squinting or straining your eyes to read parameters or follow your music-making process. The screen becomes an extension of your creativity, effortlessly accessible at all times.

The stand's ergonomic design also promotes a more organized and efficient workspace. Its integrated cable management system keeps your cables neat and tangle-free, reducing clutter and allowing you to concentrate fully on your music production. Additionally, the stand's robust construction ensures stability, even during intense sessions, guaranteeing a secure and reliable platform for your Ableton Push 3.

Whether you're a professional music producer or an aspiring artist, the Ergonomic Studio Stand for Ableton Push 3 offers unparalleled comfort and convenience. It enhances your workflow, minimizes physical strain, and maximizes your creative potential. Take your music production to new heights with this exceptional accessory that is both stylish and functional.

Upgrade your studio setup today and revolutionize the way you create music with the Ergonomic Studio Stand for Ableton Push 3. Experience comfort, visual clarity, and an improved working environment that will elevate your musical journey to new levels of excellence.

Notes: Yamaha's all-in-one portable production tool offers an exciting new take on music making. Synth and sampler engines combine with a built-in sequencer, allowing you to create tracks from scratch.

Supplier's Notes:
Unlock your creativity anywhere

Introducing SEQTRAK, the ultimate music creation station that empowers you to capture, create and connect with fans - from anywhere you happen to be.

Capture

Capture ideas as quickly as they come.

All-in-one system

Drums. Synths. Sound design. Sequencing. All included. With an array of features, all loaded in a compact, lightweight design, SEQTRAK allows you to start producing right away - no matter where you are. It's got everything you need. And more.

Lightning-fast workflow

SEQTRAK makes capturing ideas simple with a clear 3-part user interface and real-time, hands-on controls. You'll produce your music without menu-diving or waiting for boot times. Seize moments of inspiration and unleash your creativity in no time at all.

Extensive sounds

SEQTRAK extensive library contains over 2,000 presets. You'll find a vast collection of professionally crafted sounds - from rich pianos, to shimmering synths and thundering drums. More will be available with updates to the SEQTRAK app.

Onboard sampling

Capture your own unique sound samples effortlessly. SEQTRAK's sampler offers seven sound slots and a variety of effects, allowing you to shape and transform your samples with ease. Say a phrase, tap a spoon, or record your favourite pet - then customize to create polished Tracks - all in high-quality 44.1 kHz/16-bit format.

Make music on the go

With its compact size, lightweight design, built-in speaker and microphone, as well as a rechargeable battery, you can take SEQTRAK anywhere - from the studio, to the stage, to the sofa. No need to worry about power outlets or tangled cables. Create, perform, and share your music - anytime, anywhere.

Create

Turn your ideas into original music.

Sound engines + effects

Double your creative potential with two versatile sound engines. AWM2 (Advanced Wave Memory 2) boasts an impressive 128-note polyphony and specializes in authentic sounds like pianos, strings, and guitars, while the four-operator FM engine produces stunning synth pads, leads, FM electric pianos, and more. Additionally, SEQTRAK includes powerful effects for a polished sound.

Sequencer

SEQTRAK's advanced Sequencer allows for intuitive and seamless composition, arrangement, and playback of musical Tracks. With its user-friendly interface, you can easily navigate and control various parameters, such as tempo, swing, and track settings.

Sound editing

Inside the included SEQTRAK app you'll find an intuitive graphic user interface that lets you quickly dive into each Track and shape your sounds with precision. Editing includes a comprehensive set of functions, including envelopes, filters, and effect manipulation, enabling you to refine your compositions with meticulous detail.

Connect

Share your music. Connect with your fans.

Performance

Take centre stage with the SEQTRAK's powerful performance features. Create arrangements on-the-fly by combining Tracks and Patterns, remixing beats, and muting/unmuting Tracks in real-time. Add polish and sparkle to your music using global effects - then control these sounds live while you perform.

Visualizer

The SEQTRAK app has a Visualizer mode that transforms your music into a captivating visual experience. With this free performance and production feature, you'll bring your music to life with stunning visuals that sync perfectly with your songs. Customize and tweak Patterns, motion effects and more, however you see fit. There's even an Augmented Reality (AR) mode that allows you to integrate 3D virtual objects into real-world live videos.

Connectivity

- Bluetooth MIDI: Connect wirelessly to the SEQTRAK App & Visualizer, enhancing convenience and mobility.

- Wi-Fi: Transfer WAV samples wirelessly, eliminating the need for cables.

- MIDI In/Out: Connect to other hardware synths, MIDI controllers, or a computer; expanding your sound options and enabling integration with external devices.

- USB-C: Establish a single cable connection for MIDI and stereo audio to a computer simplifying setup and streamlining workflow.

- AUX In: Connect to drum machines, synths, and other external sources, expanding and diversifying your sound.

*Wireless functions may not be available depending on your area. Check with your Yamaha dealer. Windows PC cannot use wireless functions.

Specs
Tone Generator: AWM2, FM: 4 operators
Maximum Polyphony: AWM2: 128, FM: 8
Wave: Preset: 800 MB (when converted to 16-bit linear format), User: 500 MB
Effects: Reverb × 12 types, Delay × 9 types, Master Effect × 85 types, Single Effect × 85 types, Master EQ 5 bands, LP-HP filters for each track

Tracks

Track Types: DRUM, SYNTH, DX, SAMPLER
Number of Tracks: 11

Sounds

Number of Sounds: Preset Sound: 2032 Preset Sampler Sound: 392 *Can be added from the SEQTRAK app
Connectivity


USB: USB Type-C (power, MIDI to host, MIDI to device, audio)
Headphones: [PHONES] (stereo mini jack)
A/D INPUT: [AUDIO IN] (stereo mini jack)
MIDI: [MIDI] IN/OUT *Only included cable can be used.

Functions
USB audio interface: [Sampling Frequency = 44.1 kHz (quantization bit depth: 24-bit)] Input: 2 channels (stereo 1 channel), Output: 2 channels (stereo 1 channel)
Bluetooth: MIDI transmission/reception (wireless capability varies by country)
Wi-Fi: Data transmission/reception with dedicated app (wireless capability varies by country) The highest SAR value: 1.11 W/kg

Sound System

Speakers: 2.3 cm, 1 W
Microphone: Internal MEMS microphone

Power Supply

Power Source: Rechargeable lithium-ion battery (2,100 mAh, 7.6 Wh) USB Power Delivery (PD) (Output voltage: 4.8 V to 5.2 V, Output current: 1.5 A or greater)
Power Consumption: 6 W
Battery life for continuous use: 3-4 hours
Battery charge time: 3-5 hours

Size/Weight

Dimensions

Width: 343 mm (13-1/2")
Height: 38 mm (1-1/2")
Depth: 97 mm (3-13/16")
Weight: 0.5 kg (1 lb 2 oz)

Packing Box

Width: 420 mm (16-9/16")
Height: 90 mm (3-9/16")
Depth: 165 mm (6-1/2")

Included accessories: USB-C to USB-C cable, dedicated MIDI Converter Cable, Quick Operation Guide, Safety Guide
Dedicated Software: SEQTRAK app
Sequencer Block - Maximum Steps: 128

Notes: A true legend of modular synthesis, Make Noise's Maths is arguably the definitive Eurorack function generator. Based on analogue computing circuits, Maths draws on Buchla-style techniques to offer countless ways of generating and processing modulation signals.

Supplier's Notes:
The MATHS music synthesizer module is an analogue computer designed for musical purposes. Amongst other things, it will allow you to:

Features

Generate a variety of linear, logarithmic, or exponential triggered or continuous functions

Integrate an incoming signal

With no signal applied, generate a variety of linear, logarithmic, or exponential functions

Add, subtract and OR up to 4 signals

Generate analogue signals from digital information (Gate / Clock)

Generate digital information (Gate / Clock) from analog signals

Delay digital (Gate / Clock) information

If the above list reads like science rather than music, here is the translation:

Voltage Controlled Envelope or LFO as slow as 25 minutes and as fast as 1khz

Apply Lag, Slew or Portamento to control voltages

Change the depth of modulation and modulate backwards!

Combine up to 4 control signals to create more complex modulations

Musical Events such as Ramping up or Down in Tempo, on command

Initiating Musical events upon sensing motion in the system

Musical note division and / or Flam

Perfect for modulating the DPO and just about anything else

Specifications
Width: 20hp
Max Depth
(incl. power cable): 32mm

Power:
60mA@ +12V
50mA @ -12V

Notes: Something a bit different here. Red Panda's Radius combines ring mod and frequency shifter circuits with pitch tracking and modulation. Controllable chaos which delivers unique bell-like tones, atonal phaser sounds and much more.

Supplier's Notes:
Ring modulator / frequency shifter.

The Radius is a ring modulator and frequency shifter with pitch tracking and an advanced LFO. It is designed around a novel "eight-quadrant multiplier" algorithm that smoothly transitions from ring modulation to frequency shifting and allows different frequency ratios for the upper and lower tones. Radius puts complex harmonic structures, bell-like tones, metallic textures, frequency shifting, soft tremolo, and bubbly phaser sounds at your fingertips.

A ring modulator multiplies two signal signals together to create new frequencies that are the sum and difference of the input frequencies. One signal is your instrument, and the other is an internal oscillator. The Radius can double the sum or difference frequency ratios and adjust their relative levels, unlocking a spectrum of timbres beyond traditional ring modulation.

Pitch tracking, a push-to-tune footswitch, and picking dynamics make the Radius responsive and predictable on stage. Hold the left footswitch and play a note to tune the carrier oscillator to that note. Pitch tracking maintains the pitch ratio as you play up and down the scale, or tracks by a ratio (or inverse) for more dynamic sounds. An expression pedal can be assigned to any combination of knobs.

The Radius has an advanced LFO with triangle, square, random waveforms and an eight step sequencer, all of which can be envelope triggered. The envelope follower makes it responsive to playing dynamics, and two "X" modulation waveforms create sweeping spectral changes.

Well-spaced controls and stereo input/output make the Radius perfect for sound design, synths, and creative mixing. A full MIDI implementation allows you to sync to MIDI clock, sequence parameter changes, and play the carrier oscillator from a keyboard.

The Radius is a musical ring modulator and frequency shifter that transforms the timbre of your instrument in new ways. With deep features and intuitive control, Radius modernizes classic electronic techniques for the future.

Dimensions: 3.1" x 4.75" x 2.5" (with knobs)
Shipping dimensions: 5.2" x 3.75" x 3.0"
Shipping weight: 1.1 lbs

Requires a 9V DC 250 mA power supply (not included).

Notes: Arguably the most important pedal on your board, the Canvas Tuner ensures that your instrument is ready to sound its best with the perfect meld of versatility and precision.

Packaged in the same tough-as-nails, tour-ready enclosure as all Walrus pedals, the Tuner features a bright 2.8" TFT LCD display that can be viewed under just about any stage lighting conditions, multiple screen orientations, i0.1 cent accuracy, buffered or true bypass options and more. The Canvas Tuner ensures that you have the most accurate brush to paint your sonic picture.

Uncompromising Accuracy

Precise and accurate tuning you expect with i0.1 cent accuracy and multiple tuning presets. Tune with confidence, allowing your music to shine with clarity.

A World of Sound at Your Fingertips

With a flat frequency range spanning from 20Hz to 20KHz, the Walrus Audio Tuner is ready to handle tuning for low bass notes to high-strung acoustics. Even bassists needing that low B rumble can tune with confidence.

See the Music Come to Life

The 2.8" TFT LCD display is your window to pitch-perfection. Its crystal-clear quality ensures your tuning is always on point, even under the blazing stage lights or glaring sunlight.

Tailored to Your Preferences

Tailor your tuning experience to your liking with multiple screen orientation options and selectable Strobe or Needle tuning modes. Your preferences, your performance.

Your Aesthetic, Your Way

Match your style with ease. The Walrus Audio Tuner comes with eight colour themes and multiple screen savers including a custom picture mode* allowing you to personalize your tuner to fit your unique aesthetic. *Photos can be uploaded to the tuner via walrusaudio.io.

Tune Faster with Tune Assist

Let Tune Assist guide you swiftly and accurately through your tuning process. Quick and easy tuning has never been so effortless. With Tune Assist, once your note stays in tune longer than a pre-determined threshold, a border outlining the display will flash letting you know that you are in tune and can move to the next string.

Versatile Bypass Options

Enjoy ultimate flexibility with buffered bypass which routes your audio through the clean, low-noise, high headroom audio buffer with a Total Harmonic Distortion ratio of .001%. This buffer offers a high input impedance of 1M Ohms and low output impedance of 400 Ohms to maintain the highest level of single integrity. Other available bypass modes include relay bypass, monitor mode, and pass-thru.

Customize Your Reference Pitch

Adjust the reference pitch from 390Hz to 490Hz to suit your musical needs. Precision tuning for any style of music.

Stay Current with Firmware Updates

Keep your tuner up to date with firmware updates via www.walrusaudio.io. Experience continuous improvement and new features as they become available.

Notes: Endless Processor (Ex)pander Kit opens new possibilities for Endless Processor!

Now, there is pitch control over both channels. You can shift one octave up or shift down to a full sound stop, covering multiple octaves, effectively replicating the variable speed replay effect. This allows for the creation of new textures from existing sounds.

Additionally, with the expansion PCB, the Endless Processor gains an SD card slot that enables you to store up to 5 sound banks. This means everything sustained in both channels can be saved to preserve those happy accidents! However, this is not just a simple save and recall process. It allows more performing possibilities: sustain new sounds, play with them, and then recall the stored ones, all with respect to the fade controls.

And if that's not enough, there's a bonus! With the help of our web tool, you can upload the sound banks saved on the SD card and extract clickless loops of each layer in WAV format. You can then import these loops into your DAW or hardware sampler to build your composition on top of the captured sounds.

Endless Processor Expander Kit contains:

Endless Processor Ex module
Expansion PCB for the Endless Processor
Cable to connect Ex module to the expansion PCB

Width: 4HP

Depth of Endless Processor with expansion PCB attached: 45mm

Depth of Endless Processor Ex module: 30mm

Notes: Oof. Frap casually serve up one of the best filters we've seen in a long time. Quad multimode circuits with saturation and feedback give you extensive routing options. Delicious.

Supplier's Notes:
cunsa /'cu?nsa/ s.f. [dialect of Modena of uncertain etymology, probably from a Latin *comptiare, derived from comptus, participle of comere 'organize,' 'decorate'] i curing, seasoning (of foods), tanning (of leathers).

Seasoning is crucial for cooking. It is a process that enhances the flavors, glues the ingredients together, and even adds some unexpected kick.

From a gentle refining touch to a shovelful of spice, CUNSA is the perfect seasoning tool for your patches. It can sweeten a sour lead or beef up an insipid bass line, and anything in between.

And, just like a good oil, you can even taste it by itself!

CUNSA is a quadruple analog pingable multimode resonant filter, saturator, mixer, and oscillator.

It is Frap Tools' sound seasoning tool: it can gently even a patch, applying a final touch, or it can set it on fire with a ridiculous amount of spice. It's up to you and your cooking style!

It consists of four multimode resonant filters with a custom saturation and feedback control that you can use independently or in various combinations and roles thanks to a series of seminormalizations.

Four Analogue Resonant Multimode Filters

CUNSA features four state-variable filters that can be used independently or linked and mixed. Each filter provides three behaviors simultaneously: lowpass, bandpass, and highpass. Each behavior has a 12 dB/oct slope, except for the lowpass, which can be either 12 or 24 dB/oct.

Unique 'Character' Circuit for Feedback and Distortion

CUNSA handles feedback and gain staging with extreme control and versatility. Besides the usual Q control that emphasizes the cutoff frequency, the Character circuit defines the amount of soft clipping when the filter overloads. High clipping guarantees a controlled behavior with fat tone and pure resonance, while low or no clipping lets the signal saturate the filter stages and make it scream.

V/oct Tracking and Quadruple Oscillator

Each filter responds to the V/oct signal with excellent tracking. It is thus possible to move the cutoff frequency along with the main melody or make CUNSA resonate with no input and transform it into a multiple oscillator. The V/oct inputs are seminormalled so you can control more filters with the same CV. Easy chords stabs!

Ping and Ring

CUNSA is ideal for percussive and organic tones. The Ping circuit offers a behavior similar to the BRENSO but AC-coupled. Instead of shooting the frequency to the moon with any trig, CUNSA gently responds to different incoming gates with a selectable decay curve. The Ping circuit can thus create natural decay sounds when fed with trigs or smoother envelopes with any other voltage, like a linear integrator with a custom decay.

Besides this, you can also feed the filter's audio input with trigs and make it ring at high Q settings.

Linked or Individual Filtering

The four filters can work independently or arranged in groups through seminormalled inputs and sum outputs. CUNSA can thus be a 4×1, 2×2, or a massive 1×4 filter. Even odd configurations are possible, like 1+2+1 or 3+1. Mono, stereo, or quadraphonic audio is at your fingertips.

Filter and Combo Behaviour

When the filter behavior is set to COMBINED, every control of the cutoff frequency also affects the input VCA, reducing the signal amplitude and saturation as it approaches the lowest range. It can make organic decays with the ping circuit or tame the low range at high Q and Character settings.

Four Seminormalizations for Group Use

Four inputs have a cascaded seminormalization: audio inputs, VCA CV, V/oct, and Ping. Every signal patched to a filter will thus feed also those at its right, making simultaneous use even simpler. To remove a seminormalization, simply patch a dummy cable to the corresponding input.

Analog Mixing Stage and Group Outputs

Every filter output can be routed to an analogue mix bus that sums the four filters and outputs them in three combinations: all, 1+2, and 3+4. These outputs allow for versatile audio processing. Just like we did with FUMANA, we added a gentle shelving EQ for the higher frequencies of the All output to provide additional timbral variety.

CV Inputs with Attenuators

Besides the seminormalled inputs, every filter features additional CV inputs for cutoff frequency, Q, and Character, each with a dedicated attenuverter.

Notes: The Beam Splitter is a single pedal meant to create a massive sound. It is three different takes on overdrive, voiced to work together perfectly. Two of them can be delayed in time, and all three can be run in parallel or split out to three separate sources.

Beam Splitter takes a mono input and makes it wildly bigger than before. Things stretch in time and compress in dynamics, and a rich harmonic wash is achieved without sacrificing clarity.

To be washed in sound, does it have to be one big sound, or will a number of small sounds do the trick? To create a wall of sound, same question, but also how does it stay solid? How can sound waves make a wall, and is it just a moment in time; will it always crash down?

Why record your guitar thrice when Beam Splitter exists?

Beam Splitter is best seen in three sections - Purple, Green and Blue.

Purple is a hard-clipping distortion that can be seen as the core gain sound of Beam Splitter.

Of Beam Splitter's three gain sections, it is arguably the heaviest and most compressed. It has three controls, identified by their purple knobs and labels - Gain, Volume and Tone.

Green is an overdrive with both soft and hard clipping. It is the lightest and brightest of the three gain sections in Beam Splitter. Also featuring Gain, Volume controls the green gain circuit features a Time knob, which sets the delay time, up to 125 sections. When blended in parallel with the other drives, this delay time can create anything from tight comb filters to loose doubling delays to short slapback.

Additionally, there is a Decay knob, which sets the feedback of the delay, from one repeat up to many repeats trailing off. In comb filter settings this can increase resonance.

Blue is a transistor Overdrive and the most neutral and reactive of the three gain circuits, with a gain range somewhere in the middle. Its Gain switch sets the amount of breakup. In the down setting, it is less overdriven, with less compression in the mids and highs. In the up setting, it is more overdriven and aggressive. It also boasts Time and Decay controls, on top of the Tone and Volume knobs and gain switch.

The pedal's Deviate control is a shared knob that sets the amount of random variation in the delay time of the Blue and Green drive sections. The more it is turned up, the farther their delay times can deviate, and the faster those deviations happen. When at zero, the delay times are fixed, above zero, each Time knob sets that sections delay time.

Deviate intends to create a more realistic sense of doubled players, with random variations in timing as if you were playing to the track twice. It can also give the impression of flanging, chorusing or broken vibrato, depending on the settings.

The Expression jack is used to externally control the Deviate knob using a TRS expression devices with standard polarity and tip connected to the wiper.

Beam Splitter has a mono input. From there the signal goes out to Purple, Green and Blue drive sections in parallel. If only plugged into the Purple Out Jack, all three sections will join in parallel mono at that Output. Green and Blue can each be broken off into their own output by plugging into the corresponding Out jacks.

In this way you can have a full 'stereo' setup.

Notes: The ODR-1 30th Anniversary Overdrive - Limited Gold Sparkle Edition commemorates three decades since the pedal's introduction in 1993.

Ideal for blues and crunchy rock sounds (or for that extra punch when soloing), the Nobels ODR-1 has been the first choice and secret weapon for many players and top studio guitarists for 30 years. To celebrate this milestone, Nobels have produced a very special gold sparkle finish edition and added a new versatile and convenient Bass Cut Pot for more even more tonal flexibility.

Limited to 5000 units worldwide, each pedal is numbered and includes a certificate, a sticker, a special plectrum and features the original ODR-1 front cover design.

The top selling ODR-1 pedal has developed its own almost cult following since it was first designed and engineered way back in the eighties. At NAMM 2020, the pedal was upgraded to the now current ODR-1BC model. With the addition of a (much-requested) bass cut switch to help tame low end (if needed for humbuckers etc.) as well as newly developed power circuitry for enhanced headroom, it makes the pedal way more versatile for the modern age.

However, in celebration of three decades of Natural Overdrive, the ODR-1 30th Anniversary Overdrive now features an even more useful and convenient variable Bass Cut Pot, based on feedback from musicians around the world. It also retains all the other upgraded features from the BC model such as higher headroom and Glow-in-the-Dark knobs, as well as Nobels' Spectrum control- one of the most important ingredients of the original pedal's success.

The very special gold sparkle finish makes this edition look as stunning as it sounds and only a limited number of ODR-1 30th Anniversary Overdrive pedals will be released, just 5000 worldwide.

So grab a piece of legendary overdrive history while you can!

Notes: Poti II expander notable features:

- per-channel input and output attenuation for the SINE and ASSGN outputs
- per-channel shape modulation with switchable destination (wave folding, shape switching, PWM)
- stores settings during a power cycle
- LED indication of the discrepancy between the stored setting and current pot position
- 4HP
- +10/-0mA from Batumi II

Notes: Neatly implemented performance mixer with four stereo channels. CV control of level and pan, two pre- or post-fader stereo send busses, quiet mutes and cueing via a front-panel headphone socket.

Supplier's Notes:
Four channel stereo production mixer

Mixer section

Each channel has the following:

Stereo or mono - Each channel can be treated as a stereo channel or a mono channel with two summed inputs.

CV inputs for both panning and level control

Two send buses - You can route each channel to one of two send buses. Each send bus is stereo. You can choose if you want the send to come before or after the level/panning controls.

Mute - The mute has both latching mute (up) and a momentary mute (down). The mute uses a capacitor to slow the turn off and on of the mute action. So it is mostly click-less, but you may find an occasional pop.

Cue bus - You can route each channel to the cue bus.

Mains Section

Two stereo sends outputs
Two stereo returns - which can also be used to directly insert into the main mix.
Main stereo outputs - level controlled with the slider and stereo VU meter.
Main mono output - summed output of the main L&R. If you are after an 8ch mono mix, you can use each channel in stereo mode, use the level control to control the level and then pan control to control the levels of the two channels.

Cue Section

1/4" Headphone jack along with level control
Fader control to listen to the main mix, cue mix, or an adjustable mix of the two.
Expandable

Bartenders can be cascaded to create 8ch, 12ch, or 16ch mixer. The main level is what is sent the main level control can act as a group control.

Barbacks can be added to add 2ch to your mix. Barbacks can also be cascaded enabling up to a 16ch mixer configuration.

Send-VCA can be added for CV control of the level of the send.

DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 24hp
12V: 260mA
-12V: 225mA

Notes: 48-ohm version of the DT700 Pro X, part of Beyer's iconic DT series of studio headphones. Closed back design for mixing and monitoring, with a revealing, analytical sound.

Supplier's Notes:
Your studio headphones

DT 700 Pro X

Trusted sound meets performance and flexibility

In launching the closed-back DT 700 PRO X, Beyerdynamic are unveiling circumaural studio headphones, which are set to usher in a era for the long-established, Heilbronn-based company. While the classics of the PRO X series are regarded as reference products in professional studios all over the world, the PRO line is suitable for flexible use both in the studio and while on the move. It is all made possible by the STELLAR.45 driver that loudly reproduces the best sound in studio quality without any distortion - with all playback devices.

Professional audio quality

Trusted studio sound meets high performance

The STELLAR.45 sound transducer, developed and produced in Heilbronn, Germany, delivers that proven Beyerdynamic sound at previously unattained levels of studio-headphones-class performance. This is down to the neodymium ring magnet as well as copper-clad high-tech wire. The trade-off between electrical conductivity and the weight of the wire is unique. In combination with the developed three-layer speaker diaphragm featuring integrated damping layer, this has created a highly efficient driver system that performs superbly on all playback devices.

The innovative membrane structure controls the axial motion of the voice coil and ensures that it remains securely positioned in the magnet gap even during high oscillations. Another benefit is vast and natural frequency response. The fast response of the transducer and the detailed transient response, produced by the low coil weight, create a sound that is always reliable and distortion free even at high sound pressure levels.

Flexibility

Wide range of applications on all playback devices

Anytime, anywhere - the wide range of applications offered by the PRO X line unleashes your creativity. Be it on an audio interface, laptop, tablet or mobile phone: Thanks to Beyerdynamic's high-performance STELLAR.45 driver, the PRO X headphones with an impedance of 48 ohms reproduce sound at volume and power to familiar levels of studio quality - on all playback devices. The cable concept is also demonstrably suitable for everyday use: the removable mini-XLR cable can be swapped out as required to be replaced with cables that have different lengths or feature other connectivity options.

Superb wearing comfort

Tailored fit for extra-long sessions

The PRO X line also embodies what these professional headphones have always been synonymous with: maximum wearing comfort. The robust spring steel headband design assures the over-ear headphones provide a secure fit and ensures durability. The supple velour ear pads are soft to the touch, as you would expect, and guarantee superior ventilation. The headband ergonomically adapts to the shape of the wearer's head with the aid of soft memory foam and, like the ear pads, can be replaced if required.

Design & materials

Built to last, featuring a sleek, robust design

Black, minimalist and reduced to the essentials. In a word: PRO. As far as the design of and materials used in the PRO X line are concerned, attention was paid to the resilience of all components: metal headband, GRP components, a robust mini-XLR connector and hard-wearing cable. This means you are geared up on a daily basis for any professional application.

Sustainability

Sustainable headphones - made in Germany

The PRO X line headphones have been designed for daily use in challenging conditions. This is why they are handmade in Germany using premium quality materials. If required, nearly all the headphones' components can be replaced, turning these headphones into an investment that makes sense for every creator.

Technical data

Transmission type: Wired
Earpad material: Velours
Nominal impedance headphones: 48 ohms
Weight headphones without cable: 350 g
Headphone frequency response: 5 - 40,000 Hz
Nominal sound pressure level: 100 dB SPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3 m or 1.8 m straight cable, detachable, with 3-pin mini XLR & stereo jack (3.5 mm & 6.35 adapter)

Notes: Building on the familiar dual VCO core arrangement of Carrier and Modulator, Mindphaser is a complex oscillator which departs from this bit of ancestral DNA with a modern toolkit focused on searing, phase-modulated leads, percussive basslines and other-worldly effects!

A diverse palette of intermodulation and harmonic experimentation is offered through the Modulation Bus, its unique Waveshaper and the dedicated Thru-zero Phase Modulation Bus. An intuitive interface provides colour-coded visual feedback and responsive indication while performing in dimly-lit environments.

Two precision analogue oscillator cores

Precision, wide-range V/oct ramp cores, each ranging from deep subsonic to supersonic frequencies (ramp cores, and not triangular, deliver the ideal waveforms for analogue phase accumulation in the TZ-PM Bus)
Each core generates fundamental waveshapes which interact and mangle one-another through the complex Modulation Bus and TZ-PM bus
Simultaneous waveform outputs for each base shape
Dedicated button to toggle between RAMP or SAW for each core, inverting the phase of the ramp output
V/oct, linear FM and exponential FM inputs which are all independent of the TZ-PM functionality. The Carrier's FM occurs inside the core itself, separate from the TZ-PM bus.
DC-coupled linear FM

Carrier

The heartbeat of Mindphaser, focused on audio-rate generation. Drives the WAVESHAPER and TZ-PM bus. This core's frequency range spans the audible spectrum.

- An external hard SYNC IN forcibly resets the core, useful for punchy sequences, percussive basslines and drum synthesis -- or to sync to another VCO.

- Coarse and fine controls conveniently span the audible spectrum. Ranges further with external CV.

Modulator

An extremely wide range oscillator, spanning from deep LFO frequencies all the way up to supersonic sound! Four base waveforms and diverse internal routing options form a versatile palette of modulations for the CARRIER to feed on.

- Activating hard SYNC on the Modulator locks its core to the Carrier's heartbeat. The effect can be dramatic. Try this while phase modulating!

- Octave RANGE switch lets you quickly flick up and down between octaves. All the way beyond audio-rate and LFO speed octaves. Perfect for experimenting with different PM sidebands and taming the wide frequency range of the Modulator.

- Manual PW (Pulse Width) control and dedicated CV input for PWM.

Waveshaper

This isn't a classic waveshaper! Developed anew from the ground up, this waveshaper is focused on deep harmonic experimentation and audio obliteration. Each waveshaper parameter is capable of being "turned up to 11".

FOLD up to 5 octaves above the fundamental Carrier frequency. A ceiling forms at maximum, imparting additional harmonics.

FEEDBACK the waveshaped and phase-modulated audio through a signal path internal to the waveshaper.

AMPLITUDE modulation spans thru-zero, allowing for full-range ring modulation effects with bipolar CV or audio signals.

CLIP the final stage of amplitude with the switch to introduce a last stage of harmonics before the complex signal exits through the final OUT.

Switchable inverting attenuators on each CV input, for quickly inverting the behaviour of your modulation. The indicator illuminates red to tell you the attenuator has been inverted.

Two distinct waveshaping modes

A press of the shape switch toggles Mindphaser between RAMPOID (green) and TRIANGULAR (yellow) waveshaping modes.

These modes have a remarkable effect on the behaviour of wavefolding and overall character of the final complex OUT, in addition to TZ-PM Bus character.

RAMPOID mode folds more asymmetrically, with raucous, buzzing harmonic artefacts as you sweep and introduce TZ-PM

TRIANGULAR mode folds more symmetric, splitting the complex sine wave at its peak centre of the waveform. TZ-PM character is less raucous, and more smooth.

TZ-PM Bus

Thru-zero phase modulation in the ANALOGUE realm! Unlike its digital counterpart, analogue TZ-PM has its own character we've come to expect from analogue circuitry!

A dedicated, voltage-controlled phase modulation bus completely separate from the Mod Bus
Modulator's SINE wave normalled to the PM SOURCE input
SOURCE input allows you to modulate phase with any signal you patch in
Dedicated voltage-controlled INDEX (amount)
Manual phase lets you zero in (or not!) on the base phase before introducing modulation
Independent of the Linear FM circuitry in the Carrier core

Mod Bus

The internal modulation powerhouse, normally fed by the Modulator core, but external signals are patchable as well.

Select from the PULSE, RAMP/SAW or SINE output of the MODULATOR, or inject your own SOURCE to the bus.

Voltage-controlled INDEX behaves like a macro control when combined with various amounts and polarities dialled in at each CV destination.

Internal sends include the Carrier's classic Linear FM, Amplitude, Feedback and TZ-PM Index, with variable amounts and polarities!

Modulator waveforms internally feeding the Mod Bus behave unipolarly, for predictable modulation of every Mod Bus destination, without external patching. By patching in one of the Modulator's bipolar waveform outputs manually (or any external signal), you can override this behaviour.

Dimensions
30 HP
24 mm deep

Current Draw
110 mA +12V
100 mA -12V

Notes: HI POWER is Crazy Tube Circuits' next endeavour in pedal + amp-in-a-box overdrives recreating legendary sounds, following the success of Crossfire and Unobtanium.

It was inspired by the sonic combination of two British tone machines. The almighty Colorsound Power Boost meets the blistering high-headroom Hiwatt amp.

While the combination of these two units directly hints at the gear setup of David Gilmour and especially the gear used on Pink Floyd's album: Wish You Were Here (think the guitar solo sounds of "Shine on you Crazy Diamond", "Have A Cigar") the sonic options are endless.

The orange enclosure silicon transistor circuit (Colorsound Power Boost) can deliver from a transparent clean boost to an all-out fuzz driving a tube amp to sonic bliss. Crazy Tube Circuits set out to clone the original unit featuring the true-to-the-original spec BC184 transistors running on 18V DC (via an internal voltage booster circuit).

The ultra-flexible 2-band Baxandall EQ circuit can add bite and low-end rumble to any setup. Crazy Tube Circuits used a reverse log gain pot (labelled as volume), compared to the linear taper pot found in the original units and acted as an on/off switch, to be able to set the amount of boost/overdrive more precisely. While the earlier units didn't feature a master volume control (only as an aftermarket mod - Pete Cornish made an external unit master volume for David Gilmour's Power Boost) Crazy Tube Circuits chose to include one that is setup in a way so that when it is all the way clockwise it is bypassed. Later versions of the Power Boost had 9V power supply and were renamed as the "Overdriver" due to the lower headroom and their ability to drive the signal earlier. They were offered in a grey enclosure and can be seen in the gear setups of Jeff Beck, Marc Bolan, etc. Crazy Tube Circuits chose to incorporate this version as well with a flip of a toggle switch (PWR-ODR toggle switch).

On the left side of the HI POWER you will find an all-analogue circuit set out to emulate the sound and feel of a Hiwatt amp. Following the path of the famed British tube amplifier, this circuit offers authentic amp tone and feel resembling guitar tones from guitar greats like David Gilmour, Pete Townsend, Jimmy Page, Noel Gallagher to name a few. From the big bold high-headroom clean sounds to the face-melting crunchy tones.

True to the last detail, Crazy Tube Circuits have included the full EQ section along with a presence control located at the negative feedback of the power amp simulation circuit. A headroom toggle switch selects between the high headroom 100w power section provided by a quartet of EL34s (think Hiwat DR103), or the lower headroom and compression provided by a 50W power section with a pair of EL34s when hit hard (think DR504). Similar in operation to the original amps the master volume was designed to produce more gain at higher settings.

Crazy Tube Circuits taken the design a step further by adding a switch to select between input channels of the amplifier. You can select between the full response of the normal channel of the amplifier, the increased presence and tight low end of the bright channel input or the "Gilmour-ish" enhanced frequency response and added gain of those inputs linked together. This follows the modifications that Pete Cornish did to all David Gilmour's Hiwatt amps.

Like their other dual overdrive/amp-in-a-box designs, Crazy Tube Circuits also included a passive effects loop to give you the option to connect your beloved pedals between your booster/overdrive and amp in a box or use the two sections as separate and independent effects when using an external bypass switcher/looper. Gilmour enthusiasts will love to insert their Big Muff, Tube Driver and Phase 90 in there. Note that all pedals inserted in the passive effects loop are still in the signal chain when any or both sections of HI POWER are in bypass.

HI POWER features a power-up bypass/engage pre-set function for the footswitches. That way you can select which state your pedal will go to when you plug the power supply. This function comes in especially handy to people that use remote pedal switchers / loopers as they only set the state of the pedal once and then operate from the controller.

All-analog dual booster/overdrive - amp in a box.
Recreates the tones of the legendary setup used by David Gilmour in the recordings of Pink Floyd's Wish You Were Here album.
Right side: Faithful reproduction of the Colorsound Power Boost/Overdriver circuits with true-to-the-original-spec BC184 transistors.
Controls: gain, bass, treble, master, voicing toggle.
Wide gain range control: from transparent boost to gnarly and fuzzy overdrive.
Two-band (treble & bass) Baxandall EQ.
Master knob sets overall output. Huge amount of dB boost available.
Toggle switch to select between the 18V Power Boost style circuit or the 9V Overdriver style circuit.
Left side: Hiwatt AMP in a box overdrive.
All analog simulation of the preamp and power amp sound and response.
Controls: gain, bass, middle, treble, master, input channel toggle switch, headroom toggle switch.
Gain control: from clean to big bold British crunch/overdrive.
3-band Hiwatt style EQ (bass, middle, treble).
Presence control follows the original design/is located at the negative feedback of the power amp simulation circuit to control the amount of upper mid and high frequencies.
Master knob sets overall output volume. Designed to respond like the original control producing more gain at higher settings.
Input channel toggle switch selects between normal, bright, or linked input channels of the AMP for different voicing and gain levels.
Headroom toggle switch selects between the high headroom and dynamic response of a 100W amp or the lower headroom and compression of a 50W power amp.
Independent operation of the BOOST/OVERDRIVE and AMP sections
Click-less true bypass design via high-quality relays for each section.
2 Footswitches / 2 Status LEDs - one for each effect section.
Power-up bypass/engage preset function for the footswitches.
Top-mounted jacks
Passive series effects loop to connect pedals between the two sections or use them separately as independent effects.
Power Supply: Use only 9V DC, 2.1 mm x 5.5 mm, center negative (not included).
Runs internally at 18V DC (via voltage doubler circuit) for higher headroom and tube-like performance.
Current consumption: 84mA.
British Racing Green die-cast enclosure with color-coded lettering for the control section (orange for BOOST/OVERDRIVE section, white for AMP section).
Dimensions: (W x L x H): 119 x 97 x 53 mm.
Weight: 444 g.
Made in Greece.

Notes: Unlock your creativity anywhere

Introducing SEQTRAK, the ultimate music creation station that empowers you to capture, create and connect with fans - from anywhere you happen to be.

Capture

Capture ideas as quickly as they come.

All-in-one system

Drums. Synths. Sound design. Sequencing. All included. With an array of features, all loaded in a compact, lightweight design, SEQTRAK allows you to start producing right away - no matter where you are. It's got everything you need. And more.

Lightning-fast workflow

SEQTRAK makes capturing ideas simple with a clear 3-part user interface and real-time, hands-on controls. You'll produce your music without menu-diving or waiting for boot times. Seize moments of inspiration and unleash your creativity in no time at all.

Extensive sounds

SEQTRAK extensive library contains over 2,000 presets. You'll find a vast collection of professionally crafted sounds - from rich pianos, to shimmering synths and thundering drums. More will be available with updates to the SEQTRAK app.

Onboard sampling

Capture your own unique sound samples effortlessly. SEQTRAK's sampler offers seven sound slots and a variety of effects, allowing you to shape and transform your samples with ease. Say a phrase, tap a spoon, or record your favourite pet - then customize to create polished Tracks - all in high-quality 44.1 kHz/16-bit format.

Make music on the go

With its compact size, lightweight design, built-in speaker and microphone, as well as a rechargeable battery, you can take SEQTRAK anywhere - from the studio, to the stage, to the sofa. No need to worry about power outlets or tangled cables. Create, perform, and share your music - anytime, anywhere.

Create

Turn your ideas into original music.

Sound engines + effects

Double your creative potential with two versatile sound engines. AWM2 (Advanced Wave Memory 2) boasts an impressive 128-note polyphony and specializes in authentic sounds like pianos, strings, and guitars, while the four-operator FM engine produces stunning synth pads, leads, FM electric pianos, and more. Additionally, SEQTRAK includes powerful effects for a polished sound.

Sequencer

SEQTRAK's advanced Sequencer allows for intuitive and seamless composition, arrangement, and playback of musical Tracks. With its user-friendly interface, you can easily navigate and control various parameters, such as tempo, swing, and track settings.

Sound editing

Inside the included SEQTRAK app you'll find an intuitive graphic user interface that lets you quickly dive into each Track and shape your sounds with precision. Editing includes a comprehensive set of functions, including envelopes, filters, and effect manipulation, enabling you to refine your compositions with meticulous detail.

Connect

Share your music. Connect with your fans.

Performance

Take centre stage with the SEQTRAK's powerful performance features. Create arrangements on-the-fly by combining Tracks and Patterns, remixing beats, and muting/unmuting Tracks in real-time. Add polish and sparkle to your music using global effects - then control these sounds live while you perform.

Visualizer

The SEQTRAK app has a Visualizer mode that transforms your music into a captivating visual experience. With this free performance and production feature, you'll bring your music to life with stunning visuals that sync perfectly with your songs. Customize and tweak Patterns, motion effects and more, however you see fit. There's even an Augmented Reality (AR) mode that allows you to integrate 3D virtual objects into real-world live videos.

Connectivity

- Bluetooth MIDI: Connect wirelessly to the SEQTRAK App & Visualizer, enhancing convenience and mobility.

- Wi-Fi: Transfer WAV samples wirelessly, eliminating the need for cables.

- MIDI In/Out: Connect to other hardware synths, MIDI controllers, or a computer; expanding your sound options and enabling integration with external devices.

- USB-C: Establish a single cable connection for MIDI and stereo audio to a computer simplifying setup and streamlining workflow.

- AUX In: Connect to drum machines, synths, and other external sources, expanding and diversifying your sound.

*Wireless functions may not be available depending on your area. Check with your Yamaha dealer. Windows PC cannot use wireless functions.

Specs
Tone Generator: AWM2, FM: 4 operators
Maximum Polyphony: AWM2: 128, FM: 8
Wave: Preset: 800 MB (when converted to 16-bit linear format), User: 500 MB
Effects: Reverb × 12 types, Delay × 9 types, Master Effect × 85 types, Single Effect × 85 types, Master EQ 5 bands, LP-HP filters for each track

Tracks

Track Types: DRUM, SYNTH, DX, SAMPLER
Number of Tracks: 11

Sounds

Number of Sounds: Preset Sound: 2032 Preset Sampler Sound: 392 *Can be added from the SEQTRAK app
Connectivity


USB: USB Type-C (power, MIDI to host, MIDI to device, audio)
Headphones: [PHONES] (stereo mini jack)
A/D INPUT: [AUDIO IN] (stereo mini jack)
MIDI: [MIDI] IN/OUT *Only included cable can be used.

Functions
USB audio interface: [Sampling Frequency = 44.1 kHz (quantization bit depth: 24-bit)] Input: 2 channels (stereo 1 channel), Output: 2 channels (stereo 1 channel)
Bluetooth: MIDI transmission/reception (wireless capability varies by country)
Wi-Fi: Data transmission/reception with dedicated app (wireless capability varies by country) The highest SAR value: 1.11 W/kg

Sound System

Speakers: 2.3 cm, 1 W
Microphone: Internal MEMS microphone

Power Supply

Power Source: Rechargeable lithium-ion battery (2,100 mAh, 7.6 Wh) USB Power Delivery (PD) (Output voltage: 4.8 V to 5.2 V, Output current: 1.5 A or greater)
Power Consumption: 6 W
Battery life for continuous use: 3-4 hours
Battery charge time: 3-5 hours

Size/Weight

Dimensions

Width: 343 mm (13-1/2")
Height: 38 mm (1-1/2")
Depth: 97 mm (3-13/16")
Weight: 0.5 kg (1 lb 2 oz)

Packing Box

Width: 420 mm (16-9/16")
Height: 90 mm (3-9/16")
Depth: 165 mm (6-1/2")

Included accessories: USB-C to USB-C cable, dedicated MIDI Converter Cable, Quick Operation Guide, Safety Guide
Dedicated Software: SEQTRAK app
Sequencer Block - Maximum Steps: 128

Notes: The New Standard in Octave Pedals

Fusing classic BOSS octave tones with the latest tracking technologies, the BOSS OC-5 sets a new standard in octave pedal performance. Vintage mode provides a spot-on recreation of the legendary mono OC-2 from 1982, while Poly mode offers numerous enhancements for extended-range playing. And with the addition of an octave-up feature, a span of three octaves is now available for creative exploration. From fat, low mono sounds to octave-shifted chords and more, the OC-5 delivers the widest range, finest sound quality, and best playability in any octave stomp to date.

OC-5 Octave Sound Tryout

Get interactive with our custom TonePedia player and explore hundreds of sound variations. Select your instrument, tweak and choose pedal settings.

High-Octane Octave Performance

Powered by the latest real-time processing technologies from BOSS, the OC-5 provides exceptional sound and playability for the most expressive octave experience ever. A key feature is the newly developed tracking engine, which delivers clean, accurate performance with no latency. The OC-5 also offers wider range and greater polyphonic capabilities than previous OC models, covering all your octave needs in one high-performance pedal.

Classic Tones with Vintage Mode

Introduced in 1982, the OC-2 was the world's first modern octave pedal for guitar and bass. Still loved by players everywhere, the stomp's warm-yet-present tone sits perfectly in a mix, and its characteristic voice can be heard in many famous songs. The OC-5's Vintage mode brings you the OC-2's iconic mono sound, coupled with improved response thanks to the new tracking engine. Dedicated level controls are provided for -1 and -2 octave effects and the direct sound, giving you quick access to an endless variety of sub-octave colours.

Enhanced Poly Mode

The OC-5 also features an evolved version of the smart Poly mode first introduced with the OC-3 Super Octave, letting you play full chords with octave effects. The variable Range knob restricts the effect to the lower notes on your instrument, perfect for playing octave bass lines alongside normal chords and melodies in the higher registers. And with the new tracking refinements, it's even possible to isolate the octave effect to the bottom note in a chord-just turn the Range knob to the "Lowest" setting.

Extended Range with Octave Up

Another cool OC-5 enhancement is the new octave-up effect, which is available in both Vintage and Poly modes. Simply twist the dedicated +1 OCT knob to bring in the desired effect level. Use the octave-up effect on its own for faux 12-string sounds and unique solo tones, or blend it with the octave-down effects for extended chord voicings and super-fat leads.

Guitar/Bass Switch and Direct Out

The OC-5 lets you instantly optimize the performance of its tracking engine for either guitar or bass via a dedicated switch on the body of the pedal. And with the Direct Out jack, it's easy to route dry and effect sounds to different destinations, such as two stage amps or discrete channels on a mixer or audio interface.

Specifications

Nominal Input Level-20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls:
Pedal switch, GUITAR/BASS switch, VINTAGE/POLY switch, DIRECT LEVEL knob, +1OCT knob, -1OCT knob, -2OCT/RANGE knob
Indicator: CHECK indicator (Serves also as battery check indicator)

Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DIRECT OUT jack: 1/4-inch phone type
DC IN jack

Power Supply: Alkaline battery (9 V, 6LR61 or 6LF22), AC adaptor (PSA series: sold separately)

Current Draw: 60 mA

Expected battery life under continuous use: Alkaline: Approx. 5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Alkaline battery (9 V, 6LR61)
Options (sold separately) AC adaptor: PSA series

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 440 g / 1 lb

Notes: Plastic dust cover for Soma Laboratory Terra.

*** The Terra is not included, it is shown in the pictures for demonstration purposes only. ***

Notes: AIAIAI's affordable XE range might just offer the best value studio headphones around. Balance S01 drivers and comfortable E04 ear pads are paired with a slim headband for great sound at a reasonable price.

Supplier's Notes:
Modular studio headphones.

Balanced and detailed sound
Enhanced comfort over-ear cushions
High sound isolation
Weighing only 190g
Modular headphone design

Modular studio headphones with highly detailed sound and full bass extension, balanced for music production. Comfortable PU leather over-ear earpads provide high isolation, reducing surrounding noise when creating on the go. Weighing only 190g for enhanced comfort over extended periods of time.

Balanced detailed sound

Critically acclaimed sound stage specifically designed for studio use with a clear and highly detailed sound representation.

The speaker unit contains a bio-cellulose diaphragm made from bacterial cellulose, an organic compound grown using certain types of bacteria. The precision-grown diaphragm from bio-cellulose is stiffer, lighter, and stronger than regular PET speaker units, allowing the sound-producing diaphragm to vibrate without the levels of distortion found in other speakers.

Each of these qualities results in more accurate and detailed sound from the speaker with the ability to retain clarity of sound at high volumes.

With a minimal and lightweight construction of only 190g, the TMA-2 Studio XE is ideal for the flexible, versatile and dynamic workflow of modern music makers.

Lightweight & comfortable

High grade over-ear memory foam cushions covered in resilient and soft PU leather, for enhanced comfort during long creation sessions or live performances. The over-ear cushion design provides high sound isolation when creating in noisy environments.

Headband made from high grade nylon combined with durable PU leather earpads, results in a total headphone weight of only 190g.

In the box

S01 . Balanced sound - Bio-diaphragm

Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose to reduce distortion and increase transparency. Tuned for a balanced, accurate sound. Balanced sound - Bio-diaphragm.

H01 . Slim - PU foam

Slim and lightweight polycarbonate headband with soft, durable PU foam padding.

E04 . Over ear - PU leather

Soft over-ear memory foam cushions covered with PU leather. The thickness and materials provide better comfort and excellent isolation. Adding a low end boost for a warmer sound with powerful dynamics.

C05 . Straight - 1.5m - Adapter

Straight black 1.5m thermo plastic cable with soft touch surface. Comes with 1/4 to 1/8 screw-on adapter.

Headphones for life

As a music creator, you need headphones that can keep up with your evolving needs and styles. These TMA-2 modular headphone system offers a customizable solution that adapts to your creative process. With interchangeable components such as earpads, cables, and drivers, you can upgrade or change parts of your headphones to improve sound quality, comfort, or style.

By investing in this modular headphone system, you're not just buying headphones - you're investing in a long-term solution that evolves with your music. This reduces electronic waste while ensuring that you always have the optimal headphones just for you.

Diaphragm: Bio-cellulose
Driver diameter: 40 mm
Impedance: 32 Ohm
Magnet: High-grade Neodymium
Max power: 100 mW
Rated power: 40 mW
Resonance freq: 80 Hz

Notes: The Erica Synths Black Stereo Delay is a hi-fi stereo delay with a lot of unique features based on our custom DSP engine. Tape, BBD and digital delay emulations with three modes, each accompanied with delay time, feedback, feedback tone and stereo spread controls allow for designing extremely delicate effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack. Delay effects are developed by Dutch company www.112db.com

Features

Tape, BBD and digital delay types
Three modes for each type
Tap and clock synchronization of delay time
10 preset patches
CV control over delay time, feedback, tone, dry/wet mix and preset selection
Adjustable stereo delay spread
The modules run on new Erica Synths DSP hardware and the effects are developed in collaboration with Dutch company 112.dB who make some of the most beautiful sounding effects.

Erica Black Series include high-end, unique functionality and superior quality modules. Only the best, highest-quality components are used, all inputs and outputs are protected against undesired overvoltage. Erica Black Series consist of range of modules that are needed to put together entire synth.

Technical specifications:

Max audio input level before clipping: 16Vptp
CV input range (full span): -5V - +5V
Sampling frequency: 48kHz, 24bit
Delay time: 3..3000ms
Audio codecs: -108 dynamic range, -98dB THD+N
Power consumption: 120mA@+12V, 39mA@-12V
Module width: 12HP
Module depth: 35mm

Notes: Buchla's touch-sensitive keyboard updated for the 21st century. Third-generation version offers expressive control for Buchla, MIDI and Eurorack. Iconic.

Supplier's Notes:
Though our lives are dominated by touchscreens, when it comes to music, there's still a lot of magic in capacitive touch control. Don Buchla was one of the first to apply this technology to electronic music in the Buchla 112 module. The non-traditional sounds were controlled with a futuristic interface. This fantastic idea met many iterations in Buchla history: the Music Easel, 400, 700, Thunder, and 223 all employed touch technology.

Buchla USA is proud to present the third iteration of one of the most used touch interfaces, the 218, as the LEM218v3: The 218e version3 Lunar Excursion Module. The first design appeared in the 1973 release of the Buchla Music Easel and named for the spacecraft that delivered astronauts to the moon. Providing the familiar piano key layout for this early mobile music machine, the additional controls and capabilities were an interface for exploring uncharted musical territory. With the new version 3, it's been updated with a new foundation of stable, modern electronics and plenty of inputs and outputs to integrate with your Buchla, MIDI, and Eurorack gear.

Capacitive Magic

The incredible sensitivity and accuracy of the redesigned touch bed means the lightest touch will produce triggers and control voltage for your setup. The adjustable sensor has the dynamic range and durability to handle your playing. The new texture not only improves the sensing, but provides a satisfying tactile experience.

As always, pressure is an expressive output, adding an extra dimension to the control. MIDI outputs velocity and polyphony, as well as channel pressure, making the LEM218 a uniquely expressive controller for all your synthesizers. The configurable touchstrip adds a fantastic addition for pitch bend or as an additional modulator to patch into your system.

MIDI Polyphony, Velocity & More!

More than just MIDI compatible, the LEM 218 v3 gives you a unique interface to playing your existing MIDI gear and soft synths. Each touch outputs note name, channel pressure, and velocity for every note, along with sustain controls from a pedal. Polyphonic MIDI mode lets you play chords. The touchstrip can act as a pitch bend control, or as a mod wheel for additional expressive control. Easily configured using the front panel controls, you can send notes and controls on any MIDI channel. Send the LEM some MIDI, and it gets converted to voltages and gates for eurorack and Buchla control.

Get More For Your Euro

Even if you don't have any Buchla products, the LEM 218 v3 is designed to work with your Eurorack-compatible gear. Four 3.5mm jacks output 1v/octave pitch, 0-8 volts pressure, touchstrip voltage, and gate outputs for use with Eurorack equipment. Or, combine your Euro with your Buchla instruments. If NATO can do it, so can you. The sound design possibilities will blow your mind.

Arpeggiate

A pulse input allows the arpeggiator to be driven by external inputs and are allowed to interact with the automated notes to make the pattern more complex. Additional controls allow you to blend different patterns and randomness to easily change from the expected to the surprising.

Control

The classic preset voltage knobs offer several possible ways to shift your sounds into new territory. Not only can the knobs be used for quick access to voltages for your patch, they can control arpeggiation modes and octave shifting. Pads output pulses for additional control

Set It Up Your Way

Such a unique device will spark many ideas. With easy front panel configuration, you can quickly customize the velocity and pressure sensitivity, MIDI channel, knob behavior, and more. No cumbersome software setups, just simple settings with the keys and knobs, and you're ready to play.

Notes: 1U version of Happy Nerding's effects module, offering a total of 32 effects, with user-storable presets and CV control. Great value in a convenient package.

Supplier's Notes:
32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analogue Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, assigns and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order.

Reflashing procedure is quite easy: playing 40 sec long .wav file of line level amplitude to CV input.

Reflashing mode: hold both buttons for 10 sec.

By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz.

Dimensions

24 HP
40 mm deep
Module is a 1U tile in Intellijel format

Current Draw

80 mA +12V
30 mA -12V

Notes: Built for comfort as well as top-notch sound quality, Sennheiser's HD 490 Pros are a premium open-backed model for all production tasks. The Plus package includes a 3m cable, carry case and spare headband pad in addition to the standard bundle.

Supplier's Notes:
The perfect mix of clarity, comfort, and reliability, HD 490 PRO studio headphones are built to handle all the complexities of today's music production. The open-back design delivers an extremely wide, dimensional sound stage and ultra-precise sound reproduction, eliminating audio blind spots and ensuring you're in full control of every detail.

Handcrafted and German-engineered with built-to-last components and a lightweight, comfortable design, HD 490 PRO lets you feel the music and forget about the headphones. Meticulously engineered ergonomics eliminate pressure points while the open-back design provides natural ventilation, making hours in the music feel like minutes. Two sets of switchable ear pads, each with a unique sound signature for long hours of mixing and producing, eliminate ear fatigue and are designed with sustainability and durability in mind - they're both washable and replaceable. HD 490 PRO mixing headphones also include the innovative DearVR MIX-SE plugin from Dear Reality, placing you in the "sweet spot" and turning your DAW into an ultimate virtual mixing environment. DearVR MIX-SE simulates the carefully designed acoustics of mixing studios, helping you ensure a balanced, consistent translation of your mix on different systems. HD 490 PRO helps you achieve your full creative vision, eliminating audio blind spots, putting you in full control of every detail, and ensuring accurate playback beyond the studio.

Features

Backed by decades of Sennheiser engineering, technology, research and development
Open-back design with an extremely wide, dimensional sound stage and ultra-precise localization
Uncolored frequency response for honest, dynamic sound reproduction across the full spectrum
Innovative low-frequency cylinder system for full, accurate, and clearly defined low end
Precision-engineered ergonomics eliminate pressure points and deliver supreme, flexible, lightweight comfort
Sennheiser Open-frame Architecture reduces total harmonic distortion (THD) and minimizes resonance,improving audio accuracy
Includes Dear Reality dearVR MIX-SE plugin, turning your DAW into an ultimate virtual mixing environment via advanced spatial audio technology
Two unique sets of ear pads for producing or mixing help eliminate ear fatigue and pinpoint frequencies


Sustainability-inspired with washable, replaceable pads and FSC-certified, forest-friendly packaging
Geometrically angled earcup design optimizes transducer placement for a consistent listening experience
State-of-the-art neodymium magnets for superior driver performance and efficiency
Patented cable coil structure blocks cable-borne noise, ensuring the clearest signal
Ultralight voice coil for remarkably authentic and dynamic audio reproduction
Right and left ear jacks with detachable cable easily adapts to any studio configuration
Patented accessibility features: braille-guided L/R earcups and grooved ear pads for eyeglasses
Open-mesh metal earpiece covers provide natural ventilation
Durable design meticulously engineered in Germany and hand-assembled in Romania

Specs

Weight (g): 260 gr. (w/o cable)
Max. Sound Pressure Level: l128 dBSPL (1 kHz @ 5% THD)
Sensitivity: 105 dBSPL (1 kHz/ 1 Vrms), 96 dBSPL (1 kHz/ 1 mW)
Transducer principle: Dynamic, open
Wearing Style: Circumaural

Total harmonic distortion: <0.2% (1kHz, 100dB SPL)
Connector: 3.5mm/6.3mm

Ambient Conditions

Operating Relative Humidity: 10 to 80%, not condensing
Operating Temperature: +0-CC

Electrical Properties:

Sensitivity: 105dBSPL (1kHz/1Vrms), 96 dBSPL (1kHz/1mW)
Impedance: 130 ohms (1kHz)

Dimensions

Weight (g): 260g (w/o cable)
Cable length: 1.8m/3m

Notes: Immerse yourself and go beyond the boundaries of what is possible with a conventional guitar or synth pedal. GHOST PEDAL brings you new possibilities of tone shaping with its state of the art flexible audio routing chain, allowing you to jump between dimensions with a single press of a button.

From earth shaking subharmonics and distorted drones to angelic shimmer reverbs and anything in between, GHOST is a PEDAL for the adventurous sound designers and the most demanding guitar and synth players. Intuitive UI coupled with hands-on control and preset storage allows you to stay in the now and focus on your performance.

Unique user interface showing parameter values and real-time modulations

Line or high-impedance JFET guitar inputs with cabinet simulator

Full MIDI control over every parameter incl. MIDI clock over LFO and delay

True relay stereo, buffered and trails bypass modes

Bipolar LFO and expression pedal assignments to any parameter

3 reverb and 3 filter types, incl. comb with resonator, six possible routing variations

Reverb freeze, delay looper, spring reverb with virtual spring excite

Three footswitches let you change assignable parameters (tap tempo/freeze/spring excite), select presets and bypass with your feet

Notes: Updated version of Korg's excellent Wavestate, drawing on the iconic Wavestation synth to create a modern take on wavetable synthesis, now with added polyphony.

Supplier's Notes:
Wavestate mkII

Extended polyphony. Extended possibilities.

Korg's legendary Wavestation introduced the world to wave sequencing, and the 37-key Wavestate mkII builds on that legacy with a reimagined, compact synth designed to satisfy today's demanding musicians and producers. MkII expands polyphony to 96 stereo voices and adds a fresh look. It's completely compatible with sounds and samples for the original Wavestate.

Overview

Korg's legendary Wavestation introduced the world to Wave Sequencing, transforming raw samples into sounds that no-one had ever heard before. The flagship OASYS, Kronos and Nautilus keyboards developed Wave Sequencing even further, expanding on its unique palette of lush, evolving pads and driving rhythms.

Now, Korg is proud to present the new Wavestate mkII, with improved polyphony (96 stereo voices) and a fresh look. It's completely compatible with sounds and samples for both the original Wavestate, Wavestate SE and Wavestate Native software, including many excellent third-party libraries. Updated sounds and software keep it fresh and the compact form-factor, with 37 full-size keys, still transports easily and fits neatly into any stage, studio, or desktop setup.

Keyboard: 37-keys, velocity sensative
Sound generation: Wave Sequencing 2.0
Polyphony: 96 stereo voices
Configuration: Performance: 4 layers, reverb, EQ
Layers: Program, Arpeggiator, Key, and Velocity Zones
Programs: Wave Sequence, Filter, Amp, Pre FX, Mod FX, Delay
Presets: 261 Performances,799 Programs, and 1042 Wave Sequences
Controllers: MOD wheel, PITCH wheel, Vector Joystick, 8 x program/Performance Mod knobs.
Effects: Pre FX x4, Mod FX x4, Delay x4, Reverb, Performance EQ

Inputs/outputs:

Audio Outputs L/MONO, R (6.3mm TRS phone jack, impedance balanced)
Headphones (6.3mm stereo phone jack)
Damper (6.3mm phone jack)
MIDI in,out
USB Type B

Power: AC adapter (DC12V, 2500mA)
Power consumption 5w
Dimensions: 565 W x 338 (D x 92 (H mm
Weight: 2.9kg

Notes: This long-awaited FM voice module from Jomox is a self-contained synth in Eurorack format, patchable and compatible with other modules but capable of creating eight-voice polyphonic patches all on its own. Vastly powerful.

Supplier's Notes:
The Mod FM is a completely self-contained 8 voice FM synth in eurorack format, which can create powerful sounds out of the box without lacking the commonly provided CV modulation possibilities.

It provides 4 Operators and 2 LFOs/VCOs per voice. Additionally it has 2 analogue filters and analogue VCAs per voice which apply analogue warmth and depth to the Mod FM, although the FM engine is digital of course.

Each voice has own CV/Gate inputs and an individual output. There is a mix output which separates even and odd voices. Here you can mix internal effects like delay and reverb to the stereo output signal.

Next to the CV/Gate control, the Mod FM has Midi in and out in TRS type A format and a USB C connector which handles Midi too.

Even without diving too much into complicated modular setups you can create extremely good sounding and metallic FM sounds, snappy bases but also soft and deep sounding analogue style sounds.

Furthermore, the Mod FM offers a variety of external cv modulations in order to e.g. modulate each operator individually or control the FM envelopes.

The Mod FM is fully multitimbral, i.e. each voice can play an own sound in Multi Mode which gets stored as a complete multi set (not only vectorized). That is, you can copy a single sound to the desired multi, but editings made on that particular multi get stored along with the multi set.

Hence, we have the biggest advantage of the hybrid approach:

Modular is great but can be very complex, and you might be trapped in a system where you never reach again the desired sound of the latest session. Storability certainly helps.

The different sections in more detail:

Matrix FM:

4 operators are arranged in a matrix, in which every operator (= sine oscillator) can be modulated by each one of the other three.

The 16 endless potentiometers of the matrix adjust the modulation amount (FM amt) and the base frequency of the operators.

For each operator you can change the base frequency by the diagonal knobs.

There are several overtone modes that determine if one operator is controlled by the keynote (or CV) = base operator, or if it's locked in as overtone (= overtone operator) to the assigned base operator. For the base operator, the number resembles xxx semitones added to the keynote.

For the overtone operator, the adjusted number is the xxx = Nth overtone or harmonics to the base operator frequency.

The locked overtone operator tracks the base operator and is still able to modulate and being modulated.

Each operator has an ADSR envelope. This envelope can also be used to frequency-modulate the operator.

Algorithm:

The algorithms from the known FM synthesis are actually special cases to the whole matrix.

Because it gets pretty quickly uncontrollable if you turn all the knobs because of the feedbacks, Jomox have decided to implement the algorithms. There are 26 algorithms, that are derived from the DX9 with its 4 operators.

At this menu it's even possible to change the frequency mode of each operator to a fixed frequency that is edited in single Hz and which does not follow the keynote, but only modulation. That makes sense for e.g. percussive sounds.

LFO/VCO:

Each voice has 2 LFOs which can modulate either the frequency (FM) or the amplitude (AM) of an operator. Every LFO addresses 64 different wave forms that are displayed in the right OLED display.

There is another feature: each LFO can be switched into a VCO that covers the whole audio range. You can even mix it into the signal chain and it tracks to the keynote. The former LFO rate parameter turns into a detune parameter. That is, you can create classic sounding rectangle/sawtooth analogue basses or string pads - and much more of course.

Filter:

Each voice contains an analogue filter which is build up with the chip SSI2140 from Sound Semiconductor, which is an improved modern version of the old SSM2040, designed by Dave Rossum, and which had been used in Oberheim synths and the early SCI Prophet-5.

The filter has a classic 24dB output and a 12dB state-variable multimode-filter. The three basic characteristic outputs LP/BP/HP can be cross-faded continuously with one parameter called shape.

Both filter outputs 24dB/12dB can be mixed independently.

The ADSR for the filter is fast and cuts in very quick and directly, the resonance is well adjustable.

The filter section contains an own LFO for the cutoff which is independent from the digital sound engine and has also 64 waveforms.

The VCA is a fast transistor-VCA which is important for snappy sounds. The same transistor-VCA is used in all Jomox drum products. Therefore the ModFM can be used as a rich source for technoid drums and percussions of any kind.

Notes: The Erica Synths Black Reverb is a versatile hi-fi stereo FX module with lots of unique features based on Erica Synths' custom DSP engine. The reverb sources are selectable Tape, BBD and "dirty BBD" digital; emulations with three modes, each - Room, Hall and Cathedral. Delicate room size control, feedback, feedback tone and stereo spin controls allow for designing extremely delicate reverberation effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack.

Features:

Reverb based on Tape, BBD and digital delay lines
Three room sizes
Manual and triggered FREEZE with 1V/oct tracking
10 preset patches
CV control over size, feedback, tone, dry/wet mix and preset selection
Adjustable stereo spin

Specs:

Max audio input level before clipping 16Vptp
CV input range (full span) -5V - +5V
Sampling frequency 48kHz, 24bit
Audio codecs -108 dynamic range, -98dB THD+N
Power consumption 120mA@+12V, 39mA@-12V
Module width 12HP
Module depth 35mm

Notes: Honey is a palm-sized, touch-based noise instrument based on the bytebeat principle. It runs on a single AAA battery and emits sound through a speaker. It doesn't have an audio jack. It creates dynamic sounds by manipulating variables and mathematical operations through touch.

The internal dynamic equations consist of five variables and four operations, with six possible operators for each operation. They are constantly changing and forming new equations, creating chaotic randomness.

If the unit does not respond correctly, the battery needs to be replaced.

Powered by one AAA battery

Notes: Intended as an all-rounder for all production purposes, the HD 490 Pro are built for comfort as well as top-notch sound quality thanks to their open-back design. DearVR MIX-SE software allows you to mix, monitor and master with accuracy.

Supplier's Notes:
The perfect mix of clarity, comfort, and reliability, HD 490 PRO studio headphones are built to handle all the complexities of today's music production. The open-back design delivers an extremely wide, dimensional sound stage and ultra-precise sound reproduction, eliminating audio blind spots and ensuring you're in full control of every detail.

Handcrafted and German-engineered with built-to-last components and a lightweight, comfortable design, HD 490 PRO lets you feel the music and forget about the headphones. Meticulously engineered ergonomics eliminate pressure points while the open-back design provides natural ventilation, making hours in the music feel like minutes. Two sets of switchable ear pads, each with a unique sound signature for long hours of mixing and producing, eliminate ear fatigue and are designed with sustainability and durability in mind - they're both washable and replaceable. HD 490 PRO mixing headphones also include the innovative DearVR MIX-SE plugin from Dear Reality, placing you in the "sweet spot" and turning your DAW into an ultimate virtual mixing environment. DearVR MIX-SE simulates the carefully designed acoustics of mixing studios, helping you ensure a balanced, consistent translation of your mix on different systems. HD 490 PRO helps you achieve your full creative vision, eliminating audio blind spots, putting you in full control of every detail, and ensuring accurate playback beyond the studio.

Features

Backed by decades of Sennheiser engineering, technology, research and development
Open-back design with an extremely wide, dimensional sound stage and ultra-precise localization
Uncolored frequency response for honest, dynamic sound reproduction across the full spectrum
Innovative low-frequency cylinder system for full, accurate, and clearly defined low end
Precision-engineered ergonomics eliminate pressure points and deliver supreme, flexible, lightweight comfort
Sennheiser Open-frame Architecture reduces total harmonic distortion (THD) and minimizes resonance,improving audio accuracy
Includes Dear Reality dearVR MIX-SE plugin, turning your DAW into an ultimate virtual mixing environment via advanced spatial audio technology
Two unique sets of ear pads for producing or mixing help eliminate ear fatigue and pinpoint frequencies


Sustainability-inspired with washable, replaceable pads and FSC-certified, forest-friendly packaging
Geometrically angled earcup design optimizes transducer placement for a consistent listening experience
State-of-the-art neodymium magnets for superior driver performance and efficiency
Patented cable coil structure blocks cable-borne noise, ensuring the clearest signal
Ultralight voice coil for remarkably authentic and dynamic audio reproduction
Right and left ear jacks with detachable cable easily adapts to any studio configuration
Patented accessibility features: braille-guided L/R earcups and grooved ear pads for eyeglasses
Open-mesh metal earpiece covers provide natural ventilation
Durable design meticulously engineered in Germany and hand-assembled in Romania

Specs

Weight (g): 260 gr. (w/o cable)
Max. Sound Pressure Level: l128 dBSPL (1 kHz @ 5% THD)
Sensitivity: 105 dBSPL (1 kHz/ 1 Vrms), 96 dBSPL (1 kHz/ 1 mW)
Transducer principle: Dynamic, open
Wearing Style: Circumaural

Total harmonic distortion: <0.2% (1kHz, 100dB SPL)
Connector: 3.5mm/6.3mm

Ambient Conditions

Operating Relative Humidity: 10 to 80%, not condensing
Operating Temperature: +0-CC

Electrical Properties:

Sensitivity: 105dBSPL (1kHz/1Vrms), 96 dBSPL (1kHz/1mW)
Impedance: 130 ohms (1kHz)

Dimensions

Weight (g): 260g (w/o cable)
Cable length: 1.8m

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: A tiny studio microphone with a large-diaphragm capsule and groundbreaking features.

CM-1; the latest addition to Teenage Engineering's field system.

A versatile studio quality, ultra-portable microphone that comes with a built-in professional SUB-C audio interface with built-in preamp. Add a 3.5 mm jack and a 48v phantom powered mini XLR, and you have a truly one-of-a-kind battery-powered studio microphone.
A rarity in the field.

Large-diaphragm capsules are preferred for professional recording, but are rare within the world of portable equipment. CM-15 features an ESS sabre analogue-to-digital converter, preserving high-fidelity sound and capturing exceptional detail in any recording situation.

Clean, mean and lean mic-machine.

Clean, rich, transparent and natural sound. Period.

Use the gain switch on the back for padding those mean drums, or the other way around. Battery-powered with an integrated audio interface and preamp, cm-15 is always ready to use wherever you like to record. In other words: 'lean operation'.

CM-15 includes a standard 1/4" and 3/8" adapter, making it universally compatible with standard mic stands and tripods.

The included adapter allows for a 90- to 110- tilt, so you can mount the mic onto a boom arm or to better record overheads. Use tripod mini for portable setups (available separately).

Dynamic sound for any occasion.

Teenage Engineering's first microphone also means a unique sound quality to discover.

Rich, transparent and natural, cm-15 captures clear and clean sound for professional audio productions, always ready to set up wherever you like to record.

Pure craftsmanship.

CM-15 is an incredibly versatile microphone, both inside and outside the studio. The large-diaphragm condenser capsule essentially means you get a better signal, so there is less noise and better depth of sound.

Vocal recording

As a directional mic, CM-15 is perfect for the vocal booth, focused on picking up sounds in front of it.

Instrument recording

With the flattest frequency response at a 50 cm distance, CM-15 is perfect for capturing a variety of instruments, including your drum kit.

Interview/podcast

CM-15 is great for podcasts and interviews, where high audio quality and portability is necessary.

Field production

With a compact form factor and 10 hour rechargeable battery, it's a great tool for every 'trip'.

Camera mic

When filming with a video camera, connect CM-15 through the line out to record synced audio directly.

Multi-use connectivity.

CM-15 has multiple outputs that can be used simultaneously:

mini XLR, 3.5 mm jack and USB-C. It can also be powered three ways, through phantom power, battery or USB-C, instantly detecting the right power source for your connected device.

On the bottom side of CM-15, you will find three audio outputs: mini XLR, 3.5 mm jack and USB-C. The built in table stand can be used to rest and angle the microphone on a surface.

CM-15 includes a mini XLR to XLR cable for connecting to your recording console. The 3.5 mm jack can be used with headphones, while USB-C is used for digital audio interface connection, firmware updates and charging.

Technical specifications

CM-15 highlights

1-inch large-diaphragm capsule
10 hour rechargeable battery
48 V phantom power compatible pseudo-balanced mini xlr output
dual mono 3.5 mm jack line output
USB-C class compliant device with high performance
ESS sabre ES9822Q PRO analogue to digital converter

Dimensions and weight

90 mm x 65.5 mm x 19 mm
132 g / 54.6 oz

Audio characteristics

Self noise: 14 dBA

Max SPL for 0.5% THD: 138 dB
USB SNR dBA FS: 120 dB
Polar pattern: supercardioid
Polarity: positive

The field system.

CM-15 is part of Teenage Engineering's ultra-portable sound recording and performance system. All battery-powered, rechargeable via USB-C and with full interconnectivity (MIDI and high resolution audio). Compatible with iOS, macOS, and windows it's the most powerful, highest quality, portable system in the world 'as we know it'.

Notes: *** This version of UTILITIES comes with PULSAR-23 style turrets designed for connecting alligator clips. ***

UTILITIES contains a set of simple auxiliary modules to expand the functionality of the PULSAR-23 drum machine. UTILITIES modules can also be used with any gear that works with CV signals (Eurorack, semi-modular synthesizers, etc.).

The modules included in UTILITIES can be divided into two groups:
1) Passive elements such as switches, resistors, capacitors.
2) Various types of amplifiers and waveshapers, linear, non-linear, controlled and uncontrolled.
Passive elements are designed to expand the possibilities of switching and controlling the PULSAR.

Linear amplifiers are needed when you need to feed a signal from a device operating in a lower voltage format to the PULSAR inputs. For example, it can be a step sequencer with an output voltage of 5 volts, while the PULSAR needs 10 volts to fully trigger the drum modules. Or it could be the output of a cassette tape recorder, which has an output of 1 volt, while for normal operation the PULSAR needs an input level of an audio signal of 5 volts. Non-linear and controlled amplifiers and waveshapers are designed to control the signal level, while simultaneously changing its spectrum, distorting its shape and adding harmonics. The circuitry of these amplifiers is very simple and based on the early developments of the transistor era, with its inherent beauty and grace.

UTILITIES connectors are made in the PULSAR-23 format on pins designed to connect the alligator clips. There are also adapters for 3.5mm Eurorack mini-jacks.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

There are also adapters for 3.5mm Eurorack mini-jacks. The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

Power supply: DC +12 v 5.5 x 2.1 mm center plus
Current consumption: 50 ma max
Dimensions: 288 x 193 x 40 mm
Weight: 0.75 kg