Search dance music

Notes: Lush analogue EQ switchable between tilt and Baxandall high-shelf configurations.

Perform a variety of mixing and sound design duties ranging from subtle brightness and clarity adjustments to low-end rumble removal, boosted low-pass filtering and sweep EQ.

In the default tilt mode, turning the control knob clockwise simultaneously boosts treble and cuts bass. Turning anti-clockwise boosts bass and cuts treble. These boosts and cuts are pivoted around the mid-range. With the control knob at 12 o'clock the frequency response is neutral.

With Baxandall high-shelf mode enabled, turning the control knob clockwise past 12 o'clock introduces and gentle high-shelf EQ weighted around the upper mid-range. Turning the control knob anti-clockwise results in a wide high-shelf cut with subtle bass and mid-range adjustments.

Patching the channels in series allows for radical sound shaping and band-pass responses. Each channel provides up to +/- 8db of low and high-frequency gain control, summing into a low noise output stage. Hot input signals over 15vpp are saturated by active Zener diode clipping.

Features

Precise voltage control of EQ tilt and shelf
Seamless switching between EQ modes
High-quality components used throughout

Specifications

Intellijel 1U format
Width 18HP
Depth 32mm
Power requirements ~60mA +12V/~58mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K

Notes: The BETA-V from SolidGoldFX is a Bass Preamp pedal that kicks! This latest incarnation of SGFX's top selling Beta Series is designed to capture the warmth and grit of favorite vintage tube amps. You know, that distinctive drive and tone that seems to be lacking from much of today's modern bass amplification.

Yes, we all know the convenience of a lightweight "sub 10 lbs" bass head that pumps out 500 watts and a neo cab that doesn't require a roadie crew or chiropractor is great, but there is something extremely satisfying in the way that big, old Ampeg-style tube setups compress, clip and round out your signal. However, with the BETA-V you can finally have the best of both worlds - bone-shaking mojo-packed dirt, all wrapped up in modern and easy to use convenience.

Solid Gold FX's classic Beta bass architecture has been reworked and expanded, delivering a wider range of tones. The low-pass filter now has 2 settings for bumped or scooped-mids as well as a centre bypass setting for a more transparent experience. Plus, the Drive control has been reworked for lower gain applications or hotter basses.

Most importantly, the BETA-V sports an active 2-band post gain EQ allowing you to boost or cut your highs and lows with a flat response in the centre. Dialling in anything from punchy overdriven Lemmy tones to the fattest, deepest soul shaking dub is only a few knob twists away. Complete with top-mounted jacks, soft touch true bypass switching and 9-18 V DC operations, the BETA-V is a true thump machine, ready to rock your world.

Notes: Designed with versatility in mind, MapVolt is a dual-channel Universal Voltage Processor built for flexibility in handling audio and CV signals.

With only 6hp, Mapvolt is a multipurpose tool for voltage-controlled scaling, inverting, offsetting, subtracting, and mixing functions.

Each channel of MapVolt can operate in either Polarizer or Attenuator mode, allowing manual control via knobs or CV signals. In Polarizer mode, it functions as a Voltage Controlled Attenuator-Inverter, granting control over signal level and polarity. Additionally, it can be used as a Four-Quadrant Multiplier or Ring Modulator for audio signals, with the processor input serving as the carrier signal and the polarizer's CV input acting as the modulator.

In Attenuator mode, MapVolt operates as a VCA, providing control over signal levels. Its VCA CV input range of +5/-5 makes it well-suited for amplitude modulation (AM) with other +/-5V waveforms.

MapVolt is equipped with dedicated Voltage Offset knobs for each channel, which can be controlled via CV. If no input is patched into the Processor input channel, the Voltage Offset knobs can be used as Offset Generators.

With its dedicated mixing stage, MapVolt enables the combination of both channels into a shared output. Furthermore, if one of the processor channels is inverted, it allows for the subtraction of one signal from the other.

Dimensions
6 HP
33 mm deep

Current Draw
65 mA +12V
65 mA -12V

Notes: Dual channel analogue overdrive with real tube-like compression featuring 3 clipping options with carefully hand picked germanium diodes, smooth and sensitive to picking strength.

3 different gain levels from clear boost with a touch of dirt to high gain overdrive, full EQ with air control to manipulate the presence of your pickups, a MOSFET boost circuit lets you push your amp into natural breakup.

Order toggle switch to add volume or an extra gain stage.
Side A: BB style circuit with bass, air, treble, drive and volume control
Ge, Si and LED asymm clipping toggle
3 level gain toggle.
Side B: MOSFET boost +20dB with level control
A > B or B > A stack order toggle
Top mounted jacks

Notes: True bypass studio-grade compressor in small form factor offering full control of your overall tone. OTA based parallel compression with variable output current, input voltage controlling a carefully designed envelope circuit. Optimized for low noise operation.

Analogue compressor with OTA topology
Controls: Ratio, Threshold, Release, Attack, Brite (high cut), Level (compressed signal), Blend
Soft switch with relay bypass, momentary & latching operation
Top mounted jacks

Notes: Seeking to unapologetically tear apart the definition of a chorus pedal, Old Blood Noise Endeavors have created the BL-82 Chorus. An ode to delay time, this is a device with a variable clock control to shift between recognizable shimmering chorus and chaotic modulated delays.

Two delay lines, modulated by opposite synchronized LFOs, are combined in parallel and the timing of the delay lines, as well as the speed and depth of the LFOs, are all determined by one tactile slider. This allows you to instantly open up the modulated floodgates on the fly and go from well-known waves, to deeply unknown oceans of sound.

BL-82 is a chorus pedal, technically. It creates a swirling shimmery sound somewhere between chorus and flanger from a mono instrument signal. Its two delay lines are stretchable, and that's where the pedal's genre blurs from chorus into modulated delay into trailing pitch bending uncertainty.

The control set for BL-82 is dead simple. A Clock slider sets the timing of the entire system. The sample rate that determines signal fidelity, the centre delay time and the speed of the delay modulation are all affected as the slider slides. The interface is rounded out with feedback, volume, and mix add to an immediate experience that breaks open the boundaries of what it means to be a chorus and allows you to further craft the undulations of this mesmerizing device.

Notes: Everything sounds better with compression - whether you need a bit of extra pressure for your drum sounds or just that extra touch to make your modular mix more nimble and tight, the Erica Synths Stereo Compressor will make your live performances a joy. The module is optimized for percussion sounds and will be a great addition to any Erica Synths Drum module rig. The Stereo sidechain can be used to animate melodic layers on the beat and to truly bring your Basslines to life.

Features

THAT chip-based stereo compressor
DC coupled sidechain
Gain, Threshold and Compression Amount (Ratio) settings
Stereo Link for level detectors
Bypass switch
8 segment output level VU meter

Specs

Audio input level -5...+5V
Threshold -40dB to +10dB
Makeup gain -12dB to +12dB
Ratio 1:1 to 8
Power consumption +60mA, -22mA
Module width 10HP
Module depth 35mm

INPUT LVL; Adjust the input signal level to your taste
GAIN; This knob adjusts the makeup gain of the compressor
THRESHOLD; Set the compressor threshold
COMP. AMT;This knob adjusts the compression ratio
STEREO LINK; Sending hard-panned or significantly different audio levels on the left and right channels into the audio inputs may result in undesired left-right panning on the output of the compressor, because the level detectors on each channel will ensure a different amount of compression. With the STEREO LINK switch on, the level detectors on both channels are merged and the min/max function is engaged. This ensures equal compression on both channels.
PROCESS; The bypass switch allows for turning off the compressor instantly
8 SEGMENT VU METER; 8 segment VU meter gives a visual reference of the output signal
IN L / IN R; These are the L and R audio inputs
OUT L / OUT R; These are the L and R outputs of the module
SIDE IN L / SIDE IN R; These are L and R sidechain inputs. You can process each channel individually
SIDE OUT L / SIDEOUT R; These are the sidechain signal outputs - they are buffered copies of the sidechain inputs

Notes: Simple, powerful and high-quality voice recording solution, ideal for interviews, videography and podcasting. Clip on the lavalier microphone and record directly into the tiny battery-powered unit in high-quality 32-bit float resolution.

Supplier's Notes:
Small Appearance, Big Impact.

Videographers love the Tascam DR-10L Pro portable recorder with clip-on microphone as an easy and unobtrusive solution for capturing audio for video. Combining the clip-on convenience of a lavalier microphone with an ultra-compact portable recorder, this form factor solves many of the problems content creators often face. It's a superior solution for busy events such as weddings and on-location film shoots.

While traditional wireless microphone systems can pose workflow concerns, the rock-solid performance of a Tascam wired lavalier recorder is proven and assured. Simple plug-and-go operation also makes the DR-10L Pro an easy backup system for your typical voice recording setup.

The DR-10L Pro's 32-bit float recording technology lets you capture a whisper, a scream and everything in between with impeccable fidelity, ultra-low noise and no need to fine-tune gain levels. Support for wireless timecode sync with Atomos products, the ability to wirelessly control up to five recorders from the app*, plus long battery life and generous storage capacity make the DR-10L Pro ideal for professional applications.

*optional AK-BT1 required for app control and wireless timecode sync

Ultra-compact and lightweight, the DR-10L Pro is the perfect solution when stealth is a priority. Fitting in the palm of your hand and weighing just 65 grams, this recorder is easy to hide at film shoots, weddings, stage performances, and other projects where invisibility is crucial.

The included belt clip attaches easily and securely to clothing, allowing you to capture great audio without compromising your talent.

Using the DR-10L Pro's standard 32-bit float recording mode, two analogue-to-digital converters (ADCs) capture sound over an enormous dynamic range without distortion or excessive noise. This means that videographers can avoid having to discard recordings due to poor levels. With 32-bit float resolution, there's no need to adjust input gain levels, so you can set up faster and be confident that you're recording excellent audio in every situation.

The included TM-10L microphone captures clear, detailed audio while handling high sound pressure levels without distortion, making it the perfect lav mic for 32-bit float recording with the the DR-10L Pro.

Whether you're recording people at a wedding reception, a busy convention or a lengthy ceremony, the DR-10L Pro is ready for service as long as you are. There's no need to worry about changing batteries during recording: the DR-10L Pro personal recorder runs on just two AAA batteries for up to 24.5 hours*.

In addition, files are saved on the microSD card approximately every 20 seconds during recording to minimise the risk of data loss due to unexpected power cuts.

*Lithium batteries

With the optional AK-BT1 Bluetooth dongle, up to five DR-10L Pro recorders can be controlled wirelessly from iOS, iPadOS and Android devices using the free DR-10L Pro CONNECT app. The app allows videographers to check device status*, view the recorded waveforms in real time and create up to five presets. A preset can be applied to a single recorder or to all controlled units at once. You can also use the app to name devices for easy identification, for example "Bride", "Groom", and so on.

With the optional AK-BT1 Bluetooth dongle, the DR-10L Pro is ready to wirelessly synchronise timecode with supported Atomos products. Timecode allows videographers to perfectly align audio with video, even when there is no audio on the camera.

Timecode is critical for videographers when dealing with multi-camera video shoots, saving valuable time in post-production.

*Audio monitoring via app is not supported

Whether you're in a dark environment or outdoors in the sun, the DR-10L Pro's highly visible OLED display lets you confirm settings at a glance.

You can check your battery level, recording status, and input levels directly from the display, and all advanced functions are just a few button presses away.

The DR-10L Pro lavalier recorder has a headphones output for easy monitoring. You can listen to the input before or during recording, and also check the quality of your recordings immediately without having to first transfer them to a computer.

The DR-10L Pro comes bundled with a free version of RX Elements, a groundbreaking audio repair and noise reduction tool from iZotope. RX Elements gives videographers powerful audio restoration capabilities that need to be heard to be believed, from seamlessly removing coughs and background noise to reducing wind roar and ambient noise. Live video shoots for weddings, on-location interviews, and documentaries can present countless post-production challenges, and RX Elements gives videographers the tools they need to overcome them.

Specifications

Storage media and file formats

Recording media: microSD card (64 MB - 2 GB), microSDHC card (4-32 GB), microSDXC card (64-512 GB)

Recording and playback formats:
WAV: mono/poly (BWF format), 44.1/48 kHz, 16-bit, 24-bit, 32-bit float
MP3: 44.1/48 kHz, 128/192 kbit/s (recording) 32-320 kbit/s (playback)

Analogue audio inputs and outputs
Microphone input: 3.5-mm mini TRS jack (with screw lock)
Maximum input level: -11 dBu
Gain range: 7.5-38 dB
Input impedance: +/-2 kO
Included microphone: TM-10L
Sensitivity: -42 dBV/Pa
Maximum sound pressure level: 115 dB SPL
Supply voltage: 2.3 V
Analogue output (Headphones jack): 3.5-mm mini stereo jack (dual mono audio output)
Maximum output power: 10 mW + 10 mW (THD =0.1 %, 32 O)

Audio performance
Frequency response (input to recorded data): 20 Hz - 20 kHz, +0/-1 dB
Distortion: 0.01 % (1 kHz, input level -21 dBV)
Dynamic range: +/-105 dB

Power supply and other specifications

Power supply
2 AAA batteries (alkaline, NiMH or lithium rechargeable, sold separately)
USB bus power from a computer

Power consumption (batteries): 0.3 W (maximum)
Current consumption (USB bus power): 0.1 A (maximum)
Dimensions (W × H × D): 53 mm × 51 mm × 21 mm (excluding protrusions)
Weight@ 65 g (with batteries), 43 g (without batteries)
Permissible operating temperature range: 0-40 -C

Battery operation time
Conditions: WAV recording at 48 kHz, 32-bit float, mic connected, headphones not connected, limiter off, mono file, continuous operation, in hours:minutes (JEITA CP-2905)
Alkaline battery (Evolta)
16:30: No Bluetooth connection
16:00: Bluetooth connection

NiMH battery (Eneloop)
11:30: No Bluetooth connection
10:30: Bluetooth connection

Lithium battery (Energizer Ultimate Lithium)

24:30: No Bluetooth connection
23:00: Bluetooth connection

Note: Operation times may vary depending on the recording media being used. Reduced battery life when using headphones.

Notes: Introducing a limited edition re-release of this iconic electronic instrument in a modular format.

This limited edition of 75 units is a tribute to the pioneering work of Dutch musician and instrument maker Michel Waiswisz (1949 - 2008), who first invented the Cracklebox with Geert Hamelberg in the late 1960s.

The Cracklebox was a small, handheld device designed as a way to explore new sonic territories. It was one of the first electronic musical instruments to use circuit bending techniques in the creation of electronic music. It allowed musicians to manipulate and control electronic circuits in real-time, creating a wide range of unique and experimental sounds. He used a circuit from a toy piano as the basis for the instrument, and then added a series of touch-sensitive pads that were connected to the circuit. When a player touched one of the pads, the circuit would be completed, producing a crackling sound.

The Cracklebox was probably the first commercially available portable self-powered alternative 'keyboard' analogue electronic instrument with inbuilt loudspeaker.

In the 1970s about 4000 Crackleboxes were built and sold by STEIM in Amsterdam.

Nowadays many people refer to the The Cracklebox as the archetype of 'glitch' or 'circuit bending'.

In the decades since its invention, the Cracklebox has continued to be an important and influential instrument in the world of electronic music. It is still in use today, and is considered a classic example of the potential of electronic music to create unique and innovative sounds.

This Eurorack recreation includes a 9v battery, swappable through the front panel, this allows to isolate the current flowing through the user's fingers from the Eurorack frame PSU, protecting the user from undesired electrical shocks. The internal speaker has been removed, a transformer has been used instead to isolate the output signal.

The output generated can be used as an audio, as a gate or a cv signal, when using it as a cv source, due to the specific qualities of the signal, users may want to send it through other modules as slews, sample and holds, quantizers to tame/control it's peculiar cv output.

Controls:

- The module features an on/off switch to turn off the 9v battery (remember to turn it off when you turn off your Eurorack system).
- A Power Starve knob, reduces the 9v voltage feeding the circuitry changing it's overall timbre/pitch
- An Output Gain knob to control the output volume.
- A Boost switch to add more presence to the signal.

Tech Specs:

12HP
5.5 cm deep
20mA +12V
20mA -12V
9v battery required

Notes: The MMI Maxima is the final word in MMI technology. Beautiful gold patterns form gradients of touch sensitive surface areas, each connected to an input/output. Drag, rub, pinch or tap your fingers across to form connections, and create evocative and unique performances. Utilize the various pattern densities and shapes in your performance, or create installations with whatever conductive material is to hand.

Operation is easy: simply plug any audio, LFO, CV, trigger, gate, offset or clock into any of the inputs on the front panel, and connect one or several outputs to destinations in your system. The symbols near the sockets correspond to the shapes on the panel, and all that remains is for you to form the connection between the desired symbols with your hand, or any other conductive object you may have. Connect multiple at the same time to achieve liquid, gradual mixing, evolving rhythmic patterns, mixed LFOs and more. Furthermore, touch the pressure plates more firmly or in more dense areas to form stronger connections - in practice, this means a signal will pass with more or less intensity, based on the pressure you apply.

There are countless possibilities here: the shapes make it easy to memorize your patch, and the many inputs and outputs allow for enormous creativity. Eight inputs and one output? No problem. Maybe you want eight outputs sharing one input? Also no problem. Why not patch in an offset voltage, and then use the pressure sensitivity to sweep a filter with the offset patched into the filter resonance CV control? Or maybe create volume swells by patching audio into a VCA, or even an effect, for reverb or delay swells. Maybe you want to create chords, crescendos or chaotic and swiftly changing drum patterns?

Although practice helps, there are no rules for playing the MMI Maxima. Use it upside down or downside up, rack it, tape it to your body or drill it into your guitar and use it with the expression input on your pedals (yes, this is actually possible. Seriously.) With no external power needed, it makes an excellent performance companion for any system, big or small, modular, semi-modular or even not-modular-at-all.

Intended as a controller for musicians and non-musicians alike, the purpose of the MMI Maxima is to put emphasis on your performance and expression, rather than your competence at the ivory keys or dexterity at a drum pad. Let your hands, slices of pickled cucumber or other conductive everyday objects do the talking, through a combination of clever patching and expressive play - with the MMI Maxima, you have a performance tool unlike any other at your disposal.

The MMI Maxima comes in a custom case, and does not require external power to operate. Enjoy the Maxima either as a standalone controller, or rack it in your system if you desire.

Dimensions
30 HP
30 mm deep

Current Draw
Module does not draw current

Notes: Amnis is a shift register with a few tricks up its sleeves. It can be used as a generative sequencer for gates and CV, as a tunable digital noise source, as a random gate and CV generator, as the center of a chaotic system and more.

It needs two input signals to start doing its thing. A Clock and some Data. Data can be pretty much any signals. From these two signals Amnis will generate 8 gate outputs, always on the clock. From these gate outputs, it will generate 3 staircase CVs and a slewed CV. With 8 gates and 4 CV outputs it can be the heart of any patch.

Amnis has an XOR input for linear feedback. A shift register with linear feedback is the core of the Rungler, the chaotic core in Rob Hordijk's Benjolin and Blippoo Box. With Amnis you can recreate these type of behaviors with any oscillators you have on hands.

Amnis is compatible with the Turing Machine expanders thanks to its expansion port at the back.

Due to popular demand for a 3U shift register, Amnis replaces (and expands on) Ruissellement, which was the 1U version of this module.

Notes: Bleeding Hearts Eurorack Modular Device

(Random Sequencer, Rhythm Generator, Destroyer, and Filter)

The Bleeding Hearts is a device that starves, bit crushes, splatters, and filters audio sources like no other. Feeding a gate signal to the Bleeding Hearts enables a whole new world of strange and random analog-generated movement. Each position of the 8-step sequencer can bleed into each other and interact with the destruction effect, creating gated and filtered splatters, glitches, and crunches that move to the beat of your patch.

Designed and assembled in Seattle, Washington. Includes a limited 1-year warranty, if registered within 30 days of purchase.

20hp, 42mm deep.

Notes: The Z2040 is TipTop Audio's redesign of the most famous analogue filter from the polysynths of the 80's and features Tiptop Audio's signature lush, big, and creamy sound. Its frequency sweeps make thick bass lines and leads with great dynamics. When modulated with audio frequencies through its various inputs, the Z2040 gets quite colourful and is capable of creating many new sounds and textures as the forces of the incoming waves and their harmonics blend through the filter's non-linear circuit. When set with Resonance feedback fully up, the Z2040 transforms into a pure sine-core VC-Oscillator, great for making snappy percussive elements and whistling sounds.

A look under the hood will find that the heart of the Z2040 is a discrete design 4-pole low pass filter with a core similar to that of the SSM2040 filter chip, used in the 80's Prophet 5 Rev 2 synthesizer, and its brother the SSM2044, used in the famous early EMU samplers and PPG synthesizers of the 80's. Both filters are considered by many to be, "the best sounding filter ever".

The Z2040's four modulation inputs are built to handle CV and audio signals, enabling deep modulation of the filter core and passing signals. A VC resonance input is provided to modulate and even clip the sine wave produced by the filter feedback loop. A Frequency Modulation input (FM) provides dynamic filter sweeps and the unique VC-FM index allows modulation of the incoming FM signals. On top of that, the Z2040 comes with an audio VCA that can be configured to act upon the input or the output of the filter.

Size: 8HP
Depth: 42mm
Power: +12V 20ma / -12V 20ma

Notes: Quality belt-driven DJ turntable with built-in USB port and phono preamplifier, for a high-quality and convenient digitization of analog vinyl records. Plug & play: no driver installation required, unit is identified automatically.

- Sampling rates of 44.1 kHz and 48 kHz in stereo, resolution: 16 bits
- Includes software for recording and editing
- 2 speeds, pitch control +/- 10%
- Large start/stop button
- Strobe lamp for exact speed adjustment
- Adjustable anti-skating
- Shock-absorbing feet
- Switchable phono/line output
- Delivery includes removable dust cover, pick-up system, RCA and USB cable
- USB 1.1 support
- Suitable for Windows XP, Vista,7, 8, 10 and Mac OS X

Notes: Inspired by the first digital delay rack units introduced at the beginning of the "digital audio revolution" in the mid-late 70's. These units had lower bit resolution and bandwidth compared to today's digital delay standards.

TI:ME is not your typical sterile and ultra clean digital delay. With separate analogue and digital paths to get best of both worlds, this retro inspired echo effect will warm up your tone. An all analogue signal path featuring a high quality opamp is used for the best reproduction of your dry signal. Two digital recording devices, along with carefully tuned filtering, placed in parallel with the dry path give you the most ambient delay unit you have ever heard. Think of a Model 113 rack unit; the repeats are really musical, reminiscent of worn tape echoes.

Each TI:ME unit is hand lacquered in copper colour and one of a kind!

Review: This is a big collection of eight 12"s, a poster and in sept for only the most ardent Depeche Mode fan. The collection features faithfully reproduced original artwork and audio masters and all singles first released on CD singles during 1997. This is an ongoing single Series that will apparently continue over the years so that eventually all recordings previously only available on CD will make their way to wax. This instalment features big remixes from legendary names like CJ Bolland, Kruder + Dorfmeister , Underworld and Jedi Knights amongst many more.

Notes: The EVEN VCO is a voltage-controlled oscillator that offers stability and high precision tuning over 10 octaves. A redesigned temperature compensation circuit maintains the oscillator stable against voltage and temperature drops.

Specifications:

Current needs: +12V: 36mA, -12V: 26mA
Width: 8 HP
Depth: 22mm, (28mm DIY) including power connector
Aluminium, heat-treated front panel.
Designed, kits prepared and completed modules assembled in Barcelona.

Notes: The Sampling Modulator is a multi-function module that lies somewhere between a VCO, a Sample & Hold, and an 8 step trigger sequencer.

Sequencer Clocked Sample & Hold

In this mode it acts like a regular Sample and Hold (S&H) but since it is "sequencer clocked", it is capable of much more interesting patterns than the usual S&H melodies.

The CLOCK input can work in two ways: 1. As a typical clock 2. In "positive going hard sync" mode allowing you to create shuffling and polyrythmic effects.

The HOLD input can be used to keep certain notes playing.

Analog Down-Sampling Effect

In this mode (with the clock running at audio rates) you can go from nasty and harsh sampling rate reduction to an almost clean signal. (The clock run up to 25Khz without external CV and up to 200Khz with CV on the input).

Sampling Modulator/Shaper

Thanks to the V/Oct clock, by feeding a simple waveshape such as a sine wave to IN, and pitch CV to the VCO as well as to the Sampling Modulator CV input, their related frequencies and aliasing caused by the sampling rate reduction are capable of creating clangorous metallic sounds, 8 bit textures and much more.

The game becomes much more interesting when you try to destroy the wave by flipping on and off the switches of the sequencer (which at times can make it sound like three VCOs running in unison).

To understand how the Sampling Modulator works, keep in mind that we are working with a temperature compensated ramp core VCO with more than 4 octaves of tracking. This allows the timbre to stay the same while you move through the scale as the internal and external VCOs are synced in a fashion similar to "frequency related sampling rate modulation"

Unusual V/oct VCO You can use the trigger outputs as a pulse VCO. Flipping the switches on and off the switches can offer a lot of interesting timbral changes.

Notes: Connect more with the world- The original iRig Stream offered groundbreaking features that made it an overnight must-have for millions of creators. Now iRig Stream Pro takes your podcasting and streaming to an all-new level.

This 24-bit, 96 kHz audio interface for iPhone, iPad, Android and Mac/PC offers an XLR mic preamp, stereo RCA, TRRS and device inputs (loopback) - plus advanced routing, convenient controls and total portability.

It's everything you need for professional quality streaming, right in the palm of your hand.

Mix and stream up to 4 audio sources- iRig Stream Pro makes it easy to connect all your audio sources and route them to a streaming or recording app. Connect your favorite studio microphone or guitar via the XLR / 1/4" combo jack, mix in DJ decks or a keyboard via the stereo RCA inputs, then connect your earbuds to listen back and for a bonus mic/line input. You can even route in the output of your smartphone, tablet or laptop and sing or jam along.

XLR / 1/4" combo input

This input offers a pristine mic preamp with true +48V phantom power to connect studio microphones with stunning sound, switching to Hi-Z for your favorite guitar or bass.

RCA stereo input

Connect a mixer, DJ decks, keyboards and more with this low-noise stereo input.

3.5mm TRRS input/headphone output

A unique headphone/microphone jack is wired just like your smartphone so you can listen and talk over the stereo input simultaneously. It works with most headphones with a built-in mic and also with IK products like iRig Mic Lav, iRig Mic, and iRig Pre 2, giving you a wide range of options for any situation.

Device Loopback

This option routes the audio output of your digital device (iPhone, iPad, Android, Mac or PC) back into iRig Stream Pro to be mixed in with the other audio signals. This is perfect to jam or sing along with backing tracks, or process audio on one app and stream to another, all on a single device.

Each input has its own independent volume control and is then mixed down to your choice of stereo or 4 channels to stream, process or record into all your favourite apps.

Stereo or multichannel? You get both!

iRig Stream Pro offers 2 modes: stereo or multichannel. By default, iRig Stream Pro operates in stereo mode and pre-mixes multiple sources of audio (RCA stereo inputs (+ Loopback), XLR / 1/4" combo input and TRRS microphone) down to a stereo track, which is sent to your choice of streaming apps like Instagram, Facebook, Twitch, etc.

Switching to multichannel mode, the combo and TRRS inputs are routed to channels 3 and 4 respectively giving you 4 channels of audio to send to recording apps such as GarageBand or your favourite DAW.

Specs

Type: 2 in/2out or 4 in/2out
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Power: USB bus powered. 48V operations with iOS devices require battery or DC IN. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream Pro charges the connected iOS lightning device.
Metering: 3x LEDs for overall streaming signal. Peak meter for Mic/Inst input.
Device Connection: mini-DIN
Dimensions: 123 mm/4.84" x 67 mm/2.63" x 40 mm/1.57"
Weight: 146g
Line input
Connector: 2x RCA (unbal.) Left/Right
Nominal Input Level: -10 dBV
Head Room: 10 dB - Level @ max
Input Impedance: 16.5k Ohms
Frequency Response: from 20 Hz to 20 kHz (-1.5 dB)

Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 3.8 mV RMS to 388 mV RMS
Microphone Input Impedance: approx 2 kOhms
Analog Gain Range: 40 dB
Phantom Power: +48 V i 4 V
Frequency Response:
from 20 Hz to 20 kHz (-1 dB) Gain @ min
from 20 Hz to 20 kHz (-3 dB) Gain @ max

Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 70 mV RMS to 1.8 V RMS
Instrument Input Impedance: 1M Ohms
Analog Gain Range: 28 dB
Frequency Response: from 20 Hz to 20 kHz (-1 dB) Gain @ min, from 20 Hz to 20 kHz (-3 dB) Gain @ max

Headset/Phones
Connector: 1/8" TRRS jack (CTIA wiring standard)
Supply voltage: > 2,5 V
Microphone gain: Adjustable with numbered thumbwheel
Frequency Response: 20 Hz - 20 kHz
Headphone Level control: numbered thumbwheel

Battery Life
Phantom power On with iOS device: up to 20 hours (Alkaline batteries), with mic input connected to 3.1 mA phantom powered load
Note: all measurements made with Stream Level knob at 0dB.

Package includes
iRig Stream Pro interface
Lightning to mini-DIN connection cable with charging features (60cm/23.62")
USB C-Type to mini-DIN connection cable (60cm/23.62")
USB A-Type to mini-DIN connection cable (60cm/23.62")
2x 1.5V AA battery
Velcro strip

Notes: The Pitch Forkr+ features two independent pitch shifting engines with full control over each. Both will transpose your pitch up or down over a +/- three octave range and detune +/-99 cents. With rock solid tracking, an organic, musical tone and extensive control, it's your ultimate harmonizer.

Notes: Erica Synths Fusion Dual Mixer is designed to mix and overdrive audio signals on the vacuum tube.

Use the Fusion Mixer as two independent 3-input mixers (also for stereo signal mixing) or a 6-input mixer. Special feature of the Fusion Mixer - great tube overdrive effects when level knobs are set to 3 o'clock or above. When used with drum machines, it even emulates sidechain compressors. When used to mix signals from VCOs Fusion Mixer it works as waveshaper, especially, if pulse width modulated pulse signals is used in one of inputs.

All Fusion modules by default are configured to work with regular eurorack PSU.

Due to the fact that cold tube heaters have lower resistance, Fusion modules have significant power consumption peak at startup, when power consumption almost doubles for 1-2 seconds. This is not a problem with linear PSUs that have power inertia, but may cause switching PSU internal protection to turn off power supply. Please make sure your PSU has some headroom before installing multiple Fusion modules.

Technical specifications:

Input signal level: up to 20V ptp
Output signal level: 10V ptp
Mixer GAIN: 1
Power supply: bipolar +-12V , eurorack standard
Power consumption: Eurorack PSU configuration: 160mA@+12V, 10mA@-12V
Module width: 14HP
Module depth: 25mm

Notes: Xkey Air

The Bluetooth Mobile Music Keyboard

Ultra Slim. Great Design.

Lighter than an iPad!

Xkey Air is made from rugged, brushed aluminium. The same material that is used in Macs.

It only weighs 610g (1.34 lbs) so you won't even know it's there. Pop it in your backpack, or use the optional Xkey carry case.

Mac. iPhone / iPad.

(PC and Android can be connected with the WIDI BUD accessory)

Slip Xkey Air into your backpack or carry case and you're good to go.
Connect it to your favourite device, launch your favorite app ... and your recording studio is open for business. Xkey Air is pro standard. But even if you're still learning to play the keyboard, you'll love the quality and features.

Wireless & Low Latency

Bluetooth 4 MIDI controller. Low latency!

Long Battery Life

Powered by a lithium battery for hours of music creation

Aluminium Body

Robust, high quality construction. Looks great. Same finish as a MacBook.
Customizable

Download the free Xkey Plus application. Configure your keyboard how you like it.

100% MIDI

Use Xkey with your favorite music apps on your favorite devices. Works out of the box.

Mobile Native

For iPhone or iPad. Compatible with hundreds of free and pro apps.

Polyphonic Aftertouch

Your pressure on the keys controls the effect individually. Professional studio standard feature.

Portable

Made for travellers and mobile users. Fit in any bag & case!


Regular Updates

Benefit from upcoming new features. Upgrade your Xkey online!


Smart Buttons

Octave Change, Pitch Bend, Modulation, and Sustain function buttons

Velocity Sensitive

Play loud with one hand, soft with the other. There's 128 levels of sensitivity.

Controls
25 full-size keys (2 octaves).
100% MIDI compliant.
Velocity sensitive.
Polyphonic aftertouch.
Pressure sensitive Pitch bend and Modulation buttons, with continuous MIDI control data.
Octave +/- push buttons.
Sustain button.
Rechargeable Lithium Battery.
Firmware upgradable via USB.
Configurable via Xkey Plus free app for iOS, Mac OSX, and Windows.

Connectors
MIDI: USB and Bluetooth.
Indicator LEDs: Activity, Connection state, Battery

Dimensions
Width: 388 mm (15.27 in)
Height: 135 mm (5.31 in)
Depth: 16 mm (0.62 in)
Weight: only 610 g (1.34 lb): less than an iPad!

Power consumption
~ 125mW / 25mA
Included in package
Xkey Air (25 keys)
CME Xkey Air 25 (Bluetooth) Quickstart Guide.
Micro USB cable.

Notes: The NT-USB is a highly versatile side-address microphone that is ideal for recording singing and musical performances in addition to spoken applications such as podcasting and voice-over.

It is fully compatible with all mainstream recording applications on both Windows and Mac OS based computers, as well as the Apple iPad using RODE Rec, GarageBand, or any other recording app that accepts an external microphone. Use on the Apple iPad requires a suitable USB connection adaptor, such as the Apple Camera Connection Kit.

The body of the NT-USB features a zero-latency stereo headphone monitoring (3.5mm) jack, which allows you to monitor the microphone input in realtime, along with dials to adjust the monitoring level and mix between the computer/iPad audio and the microphone input.

A premium pop-filter is included, which fits onto the base of the mic, positioning the filter the ideal distance from the capsule to minimise plosives (hard 'B', 'T' or 'P' sounds that produce a harsh sound) during singing or speech. Also provided is a high-quality stand mount with industry standard 3/8" thread, desktop tripod stand that allows the NT-USB to sit at a comfortable height on a tabletop, and a pouch for storage of the microphone when not in use.

Perfect for streamers and gamers, not just podcasters and voiceovers.

This product is compatible with the Rode PSA1 and the PSA1+.

Notes: Beautiful closed-back headphones from Sennheiser, ideal for critical listening and mix applications. Not the cheapest, but sound on par with much more expensive options.

Supplier's notes:
The newly developed HD 300 PRO delivers a neutral, high-resolution working sound. Its huge depth of detail passes through even in the loudest of environments. Irrespective of whether you are editing, playing or composing music, and regardless of whether you're behind a drum kit, at the mixing desk, in a live setting or in the studio, the HD 300 PRO provides the details that you need for making good decisions.

The HD 300 PRO works at the same level of precision that you apply to your production. To make this possible, we have pushed its acoustic properties to the boundaries of physics and recalculated them. Firstly, it's linear frequency response. It doesn't interpret, but rather ensures neutral transparency - the basis for good decisions. Its sound pattern remains delicate and precise in every application - across the entire spectrum.

Secondly, we have reduced distortion, wobbling motions and partial vibrations of the diaphragm to a minimum. Together with highly sensitive transducers, this construction guarantees powerful and distortion-free reproduction even at high sound pressure levels. Not to mention the recalculated air volumes in front of the ear. The HD 300 PRO gives the sound a remarkably natural, three-dimensional quality.

The design of the HD 300 PRO represents a smart combination of wearing comfort and ambient noise attenuation. Its circumaural, viscoelastic earpads can barely be felt even after several hours. And they provide reliable protection even against very loud ambient noise. To achieve this, we have designed the acoustic unit to be more isolated than a monitoring set has ever been. Even after sessions lasting several hours, you will detect only its sound - not its weight.

What's in the box?

1 x HD 300 PRO headphones
1 x Cable (1.5m with 3.5mm jack)
1 x 1/4" Adapter jack
1 x Quick start guide

Notes: This product is used to produce drum and percussion sounds. You can make 909 type of kick drums- the toggle switch on the left chooses between long and short vca decay. The toggle switch on the left chooses long and short pitch envelope decay. Smack knob control lefts you mix in a noise 'paper' sound for the drum.

You can mix in two trigger sources to create complex percussion patterns. The internal circuit is using logic 'OR' triggering.

This product was refined for optimum sound and response from the controls. Part values were changed from the original 909 design.

-There is onboard distortion to get techno type of kick drums.

-This internal oscillator is triangular core, with internal reset.

-The internal trigger conditioner can take audio rate frequencies.

-There is a manual push button.

Width: 10hp

Current: +30mA,-24mA

Notes: Erica Synths Cymbals is a distinct topology digital/analogue module, where cymbal samples are passed thru AS3330 based VCA and controlled via envelope generators of unique design. The module features 10 sets of custom Crash and Ride cymbal samples with Tune control and individual Decay control. Accent and CV control over Tone and Decay allow you to create lot of variations in the Cymbals track. An extra feature is sample looping - when it's on, a certain part of the sample is looped while the envelope decay is on, thus creating a distinct, delay-like effect. Cymbal samples are developed by producer and musician Nero Bellum.

Features
10 sets of custom cymbal samples
Analogue VCA and EG
Tune and Decay controls
CV control with an attenuators over Tune and Decay
Sample loop for Crash and Ride
Manual triggers
Accent for better expression

Audio output level: -5...+5V
CV level (full span): -5V - +5V
Accent CV level: 10V
Tigger level: 5V
Trigger time: 1ms
Power consumption: 95mA @ +12V, 36mA @ -12V
Module width: 10HP
Module depth: 45mm

Notes: The Backpack is made from high-quality materials, including a soft, durable Alcantarar handle, ballistic nylon straps and water-resistant exterior, it is rugged and hard-wearing.

It can accommodate a RODECaster Pro II, plus microphones, studio arms and other accessories, as well as laptops up to 16 inches. Ergonomic adjustable shoulder straps with back and chest support ensure absolute comfort, with exterior pockets and compartments providing additional storage.

RODE BACKPACK Features:

Designed to exact specifications of the RODECaster Pro II
Lightweight and highly durable
Accommodates microphones and accessories
Laptop compartment (16")
Water resistant
Interior dimensions: 495 x 304mm
18L internal capacity

Notes: Tape Echo is an echo and delay processor with 7 different types of simulation to recreate the sound of vintage echo units. In addition to classic tape echo simulation, the NDD-7 has a separate spring reverb effect, sound-on-sound (SOS) for operation as a 40 second looper, and up to 1600ms of delay. For authenticity, the NDD-7 also has Wow & Flutter settings and Saturation adds natural compression and degradation, which can even drive into self-oscillation, like a true tape echo. Two foot switches operate as effect on/off and tap tempo and they double as looper and display controls. Above the foot switches are Time, Repeat, Level and Reverb controls and 2-band EQ governs the tone of repeats. USB connectivity and MIDI compatibility give further possibilities for deep control and integration with DAW and project studio setups. A full vintage echo collection in a single compact pedal for those seeking the genuine retro echo sound.

Specifications:

Power supply: 9Vdc, 300mA (min) pin-negative (not included)
Controls: Time, Repeat, Level, Reverb, Bass, Treble, Select
Current consumption: <150mA
Sampling Frequency: 48kHz
Sampling format: 32-bit
Frequency response: 20Hz - 20kHz (-1dB)
Input impedance: 5M Ohms
Input level: 1.5V max
Output impedance: 100 Ohms
Output level: 1.5V max
Latency: 1ms
Dynamic range: 103dBu / 105dBu (A-weighted)
THD: +N0.0038% (1Vrms, 1kHz) / 0.01% (1Vrms, 1kHz)
Dimensions: 115 x 105 x 58mm

Notes: The uniK 05+ is the result of extensive development work performed in Germany, defining a new quality level in its class. With its new 5" kevlar low frequency driver and a new custom engineered and powerful high frequency magnetostatic tweeter, the uniK 05+ offers many improvements over our successful uniK 05 and will easily become an important part of your studio setup with its clear and strong sound image.

What makes uniK 05+ unique?

The uniK 05+ studio monitor offers true full range quality with extended low end in a small case and an entirely new signal processing and amplifier unit with a perfect order low-z and low noise design. Mos-Fet Bi-amplification ensures a high slew-rate and fast setting, featuring true analog vintage sound processing with LC-like gyrator technology for a stressless and silky sound.

A completely new feature is the unique one knob sound character adjustment from smooth to bright, allowing you to change parameters for every room and preference. The additional high resolution High and Low switches add additional control. And of course the uniK 05+ studio monitor features a real precision gain attenuator, instead of a simple volume control.

The new design of the crossover ensures an excellent phase response and safe power limitation, driving the woofer and tweeter in phase for optimal step response. The tweeter features a newly upgraded magnetostatic design with extremely low moving mass for extended frequency and fast transient response and high sound resolution. The matching woofer consists of a kevlar composite cone with high stiffness ensuring better piston motion and excellent low-end sound reproduction.

Another new feature is the flexible rubber feet with discrete height adjustment. They are not only helpful to reduce unwanted vibrations, but also allow you to tilt the speaker towards the precise listening point - a great feature for typical near field applications.

Other new special features that are not standard in this class are standby to save power consumption (can be disabled) and a ground lift switch.

And with it's copper color woofer cone and the high quality matte cabinet finish, it looks quite uniK, too!

ROOM ADJUSTMENTS

SIDE - TILT UP

SIDE - TILT DOWN


Features
Biamp 2-Way Powered Speaker System
Active Studio Monitor Speaker
HF Driver: extremely low mass magnetostactic tweeter F49 x 26 mm
LF Driver: 5" kevlar curved cone (magnetic shielding type)
Output Power: 80W (HF: 40W, LF: 40W), 110W AC consumption power
Frequency Response: 49Hz - 25kHz
Input Impedance: 27.2kOhm (balanced) / 13.6kOhm (unbalanced)
Crossover Point: 3.2kHz
SPL: 101dB, Peak 104dB
Input Connectors: XLR / TRS 1/4" combo connector, balanced / unbalanced
Gain Control: -14 .. 0dB .. +14
Room Adjustments Control: Character: -6 .. 0dB .. +6; Low: -5 .. 0dB .. +5; High: -5 .. 0dB .. +5
Rear Bass-Reflex ventilation, optimized for near field application
Ground lift switch
Standby function, can be turned on and off
Indicator: multi color LED on front panel, power on orange, standby red
Feet: 4 pieces rubberized, adjustable height separately
Working Voltage: AC100-240V 50/60Hz
Dimensions (W x H x D): 190 x 265 x 210mm
Weight: 4.4 kg

Notes: UDG have further fine-tuned what was already a great design concept of a flight case into one especially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damage, creating a unique stylish & practical finish.

Extra wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer DJM-A9 Black also features heavy-duty, spring-loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer DJM-A9 Black not only transports your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Colour: Black
Weight: 7,90 kg / 17.38 lbs
Outer Dimensions (W x H x D): 56.1 x 45.9 x 21.6 cm | 22.1 x 18.1 x 8.5 inch
Inner Dimensions (W x H x D): 42.3 x 40.9 x 15.6 cm | 16.6 x 16.1 x 6.1 inch
Material: Heavy duty construction of 9 mm thick plywood
Protection: Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide black solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Cable access hole with removable UDG emblem cover
Removable front access panel
Removable cable & PSU storage cover panel
Fits: 1x Pioneer DJM-A9

Notes: The new CTRL Case Opus QuadOPUS QUAD is a compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer Opus Quad controller. Made of lightweight and rigid Durashock molded EVA shell, the inside is equipped with high density EVA foam corners and egg-crate foam to protect the display, jog wheels, and faders.

Fits:

Pioneer Opus Quad

Basics

Crafted from 9 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Incl. removable egg-crate foam and high-density EVA foam corners for ultimate protection
Comfortable, rivet reinforced carrying handles and shoulder strap
Compatible with Decksaver cover

Specs

Outer measures: 99 x 57 x 19,5 cm
Inner measures: 86,7-92,7 x 40,5 x 12 cm
Weight: 5,1 kg

Notes: Customized to hold the new Denon SC Live 4 controller. Crafted from 9 mm vinyl laminated plywood, sturdy aluminium profiles and heavy duty butterfly latches, this case provides ultimate protection for mobile use on the road.

Fits

Denon SC Live 4

Basics

Heavy duty construction of 9 mm vinyl laminated plywood
Solid aluminium profiles and spring loaded latches
Secure stacking due to stackable ball corners
Full padded interior keeps Controller well-protected
Detachable front cover/panel

Specs

Outer measures: 80 x 51 x 22,5 cm
Inner measures: 72 x 34,7 x 5,6 cm (Controller-compartment)
Weight: 12,4 kg
Colour: black/silver

Notes: Customized to hold the new Denon SC Live 2 controller. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles and heavy duty butterfly latches, this case provides ultimate protection for mobile use on the road.

Fits:

Denon SC Live

Basics:

Heavy duty construction of 9 mm vinyl laminated plywood
Solid aluminium profiles and spring loaded latches
Secure stacking due to stackable ball corners
Full padded interior keeps Controller well-protected
Detachable front cover/panel

Specs:

Outer measures: 74 x 50 x 22,5 cm
Inner measures: 65,2 x 33,5 x 5,6 cm (Controller-compartment)
Weight: 11,1 kg
Color: black/silver

Notes: Custom designed to accommodate a Pioneer DJM-V10 or DJM-A9 club-mixer. The included foam-set provide a snug fit for the slightly smaller DJM-A9 mixer. Crafted from 9 mm vinyl laminated plywood, sturdy aluminium profiles and heavy duty butterfly latches this case provides ultimate protection for mobile use on the road.

Fits

Pioneer DJM-V10
Pioneer DJM-A9

Basics

Heavy duty construction of 9 mm vinyl laminated plywood
Solid aluminium profiles and spring loaded latches
Incl. foamset to fit the DJM-A9 model
Removable front panel covers
Full padded interior

Specs

Outer dimensions: 61 x 50,5 x 21,5 cm
Inner dimensions: 45,4 x 43,7 x 8,5 cm (DJM-V10) / 42,4 x 40,7 x 8,5 43,8 x 33,1 x 8,4 cm (DJM-A9)
Weight: 9,8 kg
Colour: black/silver

Notes: An 8hp version of the retired Mutable Instruments Grids. It is an identical functional clone, so it will behave in the same was as the full size version, and will run any firmware that runs on the full size version.

Notes: Another typically creative offering from the good people at Soma, the Metaconformer is a MIDI router and thru box with some nice touches, including Combiner mode to join monophonic instruments into one big polyphonic patch.

Supplier's Notes:
METACONFORMER is a smart MIDI router and thru box.

The METACONFORMER has 2 independent MIDI inputs and 4 MIDI outputs. One of the outputs can be configured as a sync signal source.

Today METACONFORMER supports 3 modes of processing MIDI messages:

Splitter mode allows you to split the keyboard of one MIDI channel into several zones. Notes from each zone are sent to only one instrument. This allows you to simultaneously play several instruments at once, listen to the interaction of timbres without having to switch the MIDI channel.

Combiner mode allows you to combine several monophonic instruments into one multitimbral polyphonic instrument. This works the same way as a polyphonic synthesizer's algorithm when it activates its voices. Only instead of voices with the same dynamics and parameters, you can play completely different timbres, which greatly expands the possibilities for creating interesting harmonies and rhythms.

Translator mode allows you to play the sound core parameter by pressing notes. Each received note is translated into a CC message corresponding to the desired parameter. This mode allows you to play with sound parameters, rather than simply enter them by rotating the knob. This mode works great with granular delays, resonant filters and paraphonic oscillators.

Power supply: DC +5V via USB
Current consumption: 20 ma max
Dimensions: 148 x 50 x 20 mm
Weight: 0.15 kg

Notes: You must absolutely own Skippy to use this module; it cannot operate independently.

The firmware version 2.21 or higher must be installed on your Skippy.

Additional features:
1 CV gate or trig input for Reset
1 CV gate or trig input for Play/stop
1 Reset button
1 Play/stop button
1 Live mode on/off button
16 function potentiometers distributed over 4 rows: you can freely choose a function (BPM, STEP, BEGIN, END, GAUSS, GATE, PROBA, CHAOS, SWING, WAY) for each row.
1 row of 4 algorithm potentiometers: you can freely choose an algorithm (Euclid, Jazzy, PolyR, Tiles) for each potentiometer.
The Save function takes into account the settings used in Skippy Live.
The selected parameters for Skippy Live are automatically saved.

Technical specifications:
10 HP
Depth: 25 mm
Power consumption:
+12 V 0 mA
-12 V 0 mA
+5 V 15 mA
Comes with a connector to Skippy and Knurlies.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Solid power amplifier designed to run PAs, DJ rigs and passive studio monitors. 250 watts RMS power and 2000 watts peak. Strong, clean and reliable power at a very low price.

Suppliers notes:
The XGA-2000 amplifier offers clean, reliable power in a durable, lightweight enclosure. If you demand professional amplification performance, the XGA-2000 is perfect for delivering pure, consistent wattage night after night.

With 2000 watts of Instant Peak Power (250 watts RMS), the XGA-2000 is ideal for powering PA systems and DJ rigs. To ensure seamless, reliable performance, the amp features front-to-rear airflow and a cooling fan for thermal stability, DC output protection and short circuit protection.

For true connecting convenience, the XGA-2000 boasts XLR and 1/4-inch balanced inputs and three Speakon outputs. The unit also provides front panel indicators for Signal, Clip, Protect and Bridge, plus level controls for channels 1 and 2. Selectable modes for Stereo and Mono Bridge give you even more flexibility, while its sleek, lightweight design ensures total portability.

With clean, dependable power in a resilient, 17-pound enclosure, the XGA-2000 offers unmatched value for anyone who is serious about sound.

Notes: Stereo version of Erica's DJ-style filter module designed with drums in mind. Simple three-knob interface gives control over joint low-pass/high-pass resonant filter with CV input.

Supplier's Notes:
As its name suggests, the Erica Synths DJ VCF STEREO module provides sound treatment functionality typically found on DJ decks - it is fully open when the cutoff knob is at 12:00. When turned counter-clockwise, lowpass filtering is applied and when turned clockwise, highpass filtering is initiated. Additionally, there is a nice-sounding, adjustable resonance parameter. This provides hands-on control over the sound during performances as well as unconventional timbre modulations that are hard to achieve with conventional state variable filters.

Features

Fully analogue stereo DJ-style VCF
Manual cutoff and resonance control
Two cutoff CV inputs, one with an attenuverter
Technical specifications:

Audio level: 10Vptp
CV level: -10V - +10V
Filter slope: 24dB/oct
Power consumption: +109mA, -101mA
Module width: 8HP
Module depth: 35mm

Notes: UDG have further fine-tuned what was already a great design concept of a flight case into one specially for the most discerning DJ/producer. Constructed from solid 5mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Ableton Push 3 Black also features heavy-duty, spring-loaded handles for a secured lift & load.

UDG Ultimate Flight Case Ableton Push 3 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Specifications

Colour: Black
Weight: 12,50 kg / 27.5 lbs
Outer Dimensions (W x H x D): 45.6 x 43.2 x 18.3 cm | 17.9 x 17.0 x 7.2 inch
Inner Dimensions (W x H x D): 38.2 x 31.9 x 6.8 cm | 15.0 x 12.5 x 2.7 inch
Material: Heavy duty construction of 5 mm thick plywood
Protection: Improved powder coated and anodized hardware

High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide black solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Adjustable laptop shelf
UDG heavy-duty spring-loaded handles
Secure stacking due to stackable ball corner

Fits

Ableton Push 3

Notes: UDG have further fine-tuned what was already a great design concept of a flight case into one especially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer PLX-CRSS12 Black also features heavy-duty, spring-loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer PLX-CRSS12 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Specifications

Colour: Black
Weight: 9,00 kg / 19.8 lbs
Outer Dimensions (W x H x D): 51.1 x 42.6 x 23.0 cm | 20.1 x 16.7 x 9.1 inch
Inner Dimensions (W x H x D): 45.6 x 38.6 x 7.8 cm | 17.9 x 15.2 x 3.1 inch
Material: Heavy duty construction of 9 mm thick plywood

Protection:

Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide black solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Right & left side removable access panel
UDG heavy-duty spring-loaded handles
Cable access hole with removable UDG emblem cover

Fits

Pioneer PLX-CRSS12 turntable

Notes: Pikoloops is Manecolabs' take on the Pkocore, developed by InfiniteDigits.

Main features:

A lo-fi music mangler based on the Raspberry Pi Pico .
Capable of holding 8 minutes of 8-bit 33 kHz monophonic samples.
Tempo-synced with a selectable BPM between 60 and 300, with samples mangled by beat-synced effects (stutter, retrig, gate, tunneling).
Loaded with real-time effects like a resonant filter, timestretching, volume, and wavefolding.
Sequenced with a 128-step sequencer with recording/playback
Saved and loaded via EEPROM for instant patch recall.
Able to load custom firmware, new samples, all through USB-C.
Sync-compatible with eurorack devices.
12HP eurorack module

Notes: A lot of fun from this quirky little box, designed to hold up to eight minutes of samples and then allow you to trigger, warp and manipulate them in real time with hands-on controls.

Supplier's Notes:
Pikoloops is Manecolabs' take on the Pkocore, developed by InfiniteDigits:

Main features:

A lo-fi music mangler based on the Raspberry Pi Pico .
Capable of holding 8 minutes of 8-bit 33 kHz monophonic samples.
Tempo-synced with a selectable BPM between 60 and 300, with samples mangled by beat-synced effects (stutter, retrig, gate, tunneling).
Loaded with real-time effects like a resonant filter, timestretching, volume, and wavefolding.
Sequenced with a 128-step sequencer with recording/playback
Saved and loaded via EEPROM for instant patch recall.
Able to load custom firmware, new samples, all through USB-C.
Sync-compatible with eurorack devices.

Notes: Colortones SPRING REVERB II is an expressive, analogue voiced, vintage reverb engine hosting 3 versatile recreations of classic Reverb Units together with 2 independent modulation filters - Vibrato and RotoTrem.

Reverb Modes

STUDIO - Modern 90's Rack Reverb - A Warm and Natural studio reverb

TANK - 70's Electromechanical Reverb Tank with bright, wet acoustic room reflections

ECHOVERB - Based on the 90's Princeton PT2399 Echo Chips with pronounced delayed reflections/echoes.

The MOD knob adds an additional depth control for subtle Vibrato and RotoTrem FX adding a spatial dimensionality to the acoustic characteristics of the Reverberation.

Spring Reverb II captures the essence of iconic Reverbs while adding its own sonic characteristics. Whether you're looking to add a subtle touch of reverb to your playing or create expansive soundscapes, the SPRING REVERB II pedal is the perfect tool to take your playing to the next level.

Controls

Reverb Mode Switch

Select between : Classic 80's Studio Rack, 70's Tank, EchoVerb

Decay

Adjusts the decay time of the reverberation tail

Blend

Adjusts the Mix / Depth of the reverb effect with the dry signal. Noon / 12 O'Clock is 50/50 Wet Dry Mix, beyond noon edges toward a wet only sound

Tone

Tilt EQ style reverb tone control. Does not effect the dry signal tone. Noon / 12 O'Clock is unity

Mod

Adjusts the Depth of the vibrato like modulation within the Reverb engine, adding complex harmonics and spatial depth

LEDs

The Left LED indicates INPUT CLIPPING and will illuminate when the input signal is too hot. It also indicates when the SECOND LAYER of knob functions is active

Bypass LED indicates when the effect is active

Bypass

A short tap on the Soft touch footswitch activates True Bypass.

A Long press (500ms) tap will initiate the Layer 2 controls

Secondary layer controls

Micro tune delay time - EchoVerb mode only

Controls the master Speed/Time for the delay in the background of the EchoVerb Reverb engine

Boost

Allows for -+6dB output Boost. Noon is Unity

RotoTrem speed override

Controls the master Speed/Time for the RotoTrem Modulation. Add just a little to expand the depth of the Reverb or more to get a faster modulation

RotoTrem depth

Adjust the amount of the RotoTrem applied post Reverb.

Tech Specs:
True Bypass
Current Draw: 145mA
Input Voltage: 9V DC (center negative)
external power supply not included