Search dance music

Notes: This long-awaited FM voice module from Jomox is a self-contained synth in Eurorack format, patchable and compatible with other modules but capable of creating eight-voice polyphonic patches all on its own. Vastly powerful.

Supplier's Notes:
The Mod FM is a completely self-contained 8 voice FM synth in eurorack format, which can create powerful sounds out of the box without lacking the commonly provided CV modulation possibilities.

It provides 4 Operators and 2 LFOs/VCOs per voice. Additionally it has 2 analogue filters and analogue VCAs per voice which apply analogue warmth and depth to the Mod FM, although the FM engine is digital of course.

Each voice has own CV/Gate inputs and an individual output. There is a mix output which separates even and odd voices. Here you can mix internal effects like delay and reverb to the stereo output signal.

Next to the CV/Gate control, the Mod FM has Midi in and out in TRS type A format and a USB C connector which handles Midi too.

Even without diving too much into complicated modular setups you can create extremely good sounding and metallic FM sounds, snappy bases but also soft and deep sounding analogue style sounds.

Furthermore, the Mod FM offers a variety of external cv modulations in order to e.g. modulate each operator individually or control the FM envelopes.

The Mod FM is fully multitimbral, i.e. each voice can play an own sound in Multi Mode which gets stored as a complete multi set (not only vectorized). That is, you can copy a single sound to the desired multi, but editings made on that particular multi get stored along with the multi set.

Hence, we have the biggest advantage of the hybrid approach:

Modular is great but can be very complex, and you might be trapped in a system where you never reach again the desired sound of the latest session. Storability certainly helps.

The different sections in more detail:

Matrix FM:

4 operators are arranged in a matrix, in which every operator (= sine oscillator) can be modulated by each one of the other three.

The 16 endless potentiometers of the matrix adjust the modulation amount (FM amt) and the base frequency of the operators.

For each operator you can change the base frequency by the diagonal knobs.

There are several overtone modes that determine if one operator is controlled by the keynote (or CV) = base operator, or if it's locked in as overtone (= overtone operator) to the assigned base operator. For the base operator, the number resembles xxx semitones added to the keynote.

For the overtone operator, the adjusted number is the xxx = Nth overtone or harmonics to the base operator frequency.

The locked overtone operator tracks the base operator and is still able to modulate and being modulated.

Each operator has an ADSR envelope. This envelope can also be used to frequency-modulate the operator.

Algorithm:

The algorithms from the known FM synthesis are actually special cases to the whole matrix.

Because it gets pretty quickly uncontrollable if you turn all the knobs because of the feedbacks, Jomox have decided to implement the algorithms. There are 26 algorithms, that are derived from the DX9 with its 4 operators.

At this menu it's even possible to change the frequency mode of each operator to a fixed frequency that is edited in single Hz and which does not follow the keynote, but only modulation. That makes sense for e.g. percussive sounds.

LFO/VCO:

Each voice has 2 LFOs which can modulate either the frequency (FM) or the amplitude (AM) of an operator. Every LFO addresses 64 different wave forms that are displayed in the right OLED display.

There is another feature: each LFO can be switched into a VCO that covers the whole audio range. You can even mix it into the signal chain and it tracks to the keynote. The former LFO rate parameter turns into a detune parameter. That is, you can create classic sounding rectangle/sawtooth analogue basses or string pads - and much more of course.

Filter:

Each voice contains an analogue filter which is build up with the chip SSI2140 from Sound Semiconductor, which is an improved modern version of the old SSM2040, designed by Dave Rossum, and which had been used in Oberheim synths and the early SCI Prophet-5.

The filter has a classic 24dB output and a 12dB state-variable multimode-filter. The three basic characteristic outputs LP/BP/HP can be cross-faded continuously with one parameter called shape.

Both filter outputs 24dB/12dB can be mixed independently.

The ADSR for the filter is fast and cuts in very quick and directly, the resonance is well adjustable.

The filter section contains an own LFO for the cutoff which is independent from the digital sound engine and has also 64 waveforms.

The VCA is a fast transistor-VCA which is important for snappy sounds. The same transistor-VCA is used in all Jomox drum products. Therefore the ModFM can be used as a rich source for technoid drums and percussions of any kind.

Notes: Try new circuits directly in the AE modular!

The BRAEDBOARD (no typo!) contains a breadboard area for solderless electronics prototyping so you can experiment with any kind of analog or digital electronics and make your first steps into electronics, starting with simple circuits for beginners to developing your own module.

Beyond the basic breadboard area, this module offers some benefit especially related to the AE modular system:

The left sockets make all bus signals available (CV, Gate, control, MIDI strt/stop/clock) and can be patched directly from here into your circuit
The leftmost row of the upper breadboard (the red one) is connected to +5V
The leftmost row of the lower breadboard (the black one) is connected to ground
The right sockets contains two units of the usual output resistor of 1k

The BRAEDBOARD module contains:

The module itself, completely assembled

A bunch of breadboard wires

Also included is an assortment of electronic components that are common in many module types:

Resistors (10 of each): 1k, 4,7k, 10k, 47k, 100k
Capacitors (5 of each): 1nF, 10nF, 100nF
Electrolytic capacitors (2 of each): 10uF, 100uF
2 LDR's
10 diodes 1N4148
10 LEDs red
2 transistors NPN (BC547)
2 transistors PNP (BC557)
2 MCP602 dual Op Amp
2 NE555 classic timer/oscillator chip
2 CD4017 counter
2 CD4051 analog switches
2 CD40106 schmitt triggers/inverters
Plugin-board with 2 potentiometers 50k
2 tactile momentary switches
2 slide switches

With these components, a lot of different synth circuits can be created, like oscillators, envelope generators, simple sequencers, to name a few. So this should give you a nice start into the exciting world of electronics in general and synth circuits in special.

Together with the upcoming information and sample projects you should be able to successfully build your first circuits in relatively short time.

Notes: The COMPACTMIXER module is complete "final" mixer for your AE system; if offers the following features:

6 mono input channels with minijack and AE patch socket each

2 stereo input channels with stereo minijack and AE patch sockets each

Click-free mute buttons per channels

Per channel: level, pan and two FX-send knobs

2 FX send-return sections (send mono, return stereo) to connect either AE internal FX module or external FX devices

Master level control

Stereo headphone output with separate level control.

Shipping of this module will start approx. mid March 2022.

An internal connector allows the extension of input channels by a future extension module (similar to MIXCONSOLE/3CH)

Notes: The DIODEFILTER is an adaption of the well-known diode ladder filter that became most popular by Roland's TB-303 bassline. And here it is for the AE modular!

Notes: DRONX is a special mixer designed especially for the DRONE38 module; if has 6 input channels (so you can connect two DRONE38 modules) and offers some sound processing capabilities: A tone control with bass and treble control, a distortion, and finally a dual delay with different algorithms. Two insert points allow to add up to two more audio effects to the internal signal chain. Together with the DRONE38 module(s) you get a quite nice drone synth for dense, dark soundscapes.

Of course, it can be used with any other sound sources!

Notes: The FILTERBANK914 is designed after the famous Moog 914 Fixed Filterbank. It includes 12 bandpass filters with fixed center frequencies and additionally a lowpass- and a highpass filter. Control knobs for all the frequency bands allow individual mixing of the bands. This is especially useful for shaping the sound spectrum similar to acoustic instruments - they get their character by certain frequency peaks, so called "formants".

This module is different to (and not a good choice as) a multiband equalizer. The equalizer can increase/decrease certain bands in the range of e.g. -12...+12dB, with the signal unchanged with all controls in center position. In contrast, the FILTERBANK914 controls are attenuators over the full level, meaning the individual band is completely muted when the knob is turned completely counter-clockwise.

As a special feature, the module has separate outputs for "even" and "odd" bands, meaning that one output only contains the sum of half the bandpasses, the other one the remaining ones. This leads to some type of "pseudo stereo".

Notes: HEARTBEAT is a master clock source for AE modular, with some additional features. The module offers:

Precise BPM setting with an encoder in the range of 30-300 BPM in steps of 0.1 BPM
A graphical display for the tempo and additional info and menu
A big tap button for setting the tempo by tapping it
An illuminated start/stop button
Six independent clock outputs; each of them can be configured by a menu to a time signature between 1/1 to 1/32th plus dotted and triplets.
Inputs for clock, reset and two CV and trigger inputs that can be assigned to different functions

The clock source can be either internal or an external clock (at 1/96th rate which corresponds to MIDI real time control, e.g. the bus clock in the AE generated by the MASTER module)

Notes: The module was named Kuzmin Filter in the past as a tribute to the developer of the Polivoks, Vladimir Kuzmin. For certain reasons, the module will now be called GRUNGE Filter (due to the sound), with the circuitry remaining unchanged.

The Polivoks was a Russian synth that was produced between 1982 and 1990.This module is the AE version of the filter that gave the Polivoks a unique, rough sound.

Beyond the basic design, this filter offers some additional features:

Two different resonance characteristics, hard and soft
An FM function, that adds the input signal to the modulation of the filter
An optional overdrive for the output, making the sound even more rough and untamed.

Notes: MODULATORS is a multifunctional module offering different kinds of modulation sources in a 1U module. It is designed especially with very small AE systems in mind.

You get:

An AD envelope generator
an LFO with adjustable rate, square wave and triangle/sawtooth output, pulse width knob and CV control
a random CV source working in different modes (stepped, smoothed, quantized)
and a VCA

Notes: Unique, vintage reverb sound.

The SPRINGREVERB module brings the unique sound of this quite old (introduced in the 60's) technique for creating reverbs to the AE modular.

The reverb works by sending the audio signal to a set of 3 springs; at the other end of the springs the sound is picked up by a transducer, converting the mechanical movement of the springs back into an electrical signal. When the audio signal arrives at the end of the springs, the waves are reflected several times; these reflections create the reverb sound.

The spring "tank" (a metal box containing the springs and transducers, size approx. 24 x 9 x 3.5 cm) is connected externally by a cable.

The product contains all components: The module itself, the spring tank and the connection cable.

Note: The sound of a spring reverb is quite unique and has a strong vintage character; if you are looking for a more "clean", natural sounding reverb please take a look at the MULTIFX module.

Notes: With the STOMP-IO module, you can integrate guitar effect pedals and similar devices into your AE modular system! For output (send) and input (return) return there is a mono minijack socket; two minijack to 1/4" socket adapters are included as effect pedals usually work with the latter ones. Send and return levels can be controlled with separate knobs.

Notes: The TBD module is a multifunctional DSP (digital signal processing) module that includes more than 30 different synthesis and audio processing plugins. It is a collaboration project between CTAG Kiel (an academic working group of Kiel University of Applied Sciences), instrumentsofthings.com (who produce this module for Eurorack) and tangiblewaves.

The module looks quite simplistic with it's only three knobs and three buttons, but the power lies in the web based user interface for editing and storing the parameters. For editing, the module is connected via USB to your computer and a small software tool running here is the bridge to the editing of the parameters via your web browser. IMPORTANT TO KNOW: When the editing is done, the module runs autonomously, without a computer!

Up to 10 favourites can be stored on the module and be chosen by the CONFIG button.

Dynamic control of the modules' parameters works via the two CV inputs and two trigger inputs (which are linked to two buttons), and two knobs are also available for live tweaking parameters. The assignment of inputs/knobs to actual parameters is done in the web based user interface.

Please note that the TBD module has mono audio input and output (compared to the Eurorack version which is stereo); plugins that do stereo audio work also in the AE TBD, but only on one channel. ("Why only mono?" you might ask; the limitation to mono is due to licensing agreements to keep the module price in the usual AE range.

The contained plugins are:

Talkbox (Vocoder), MSxxNoise (MS20 filter and Stone Phaser), Antique (Old Record / Tape Effect), Subotnik (Huge Modulations), VctrSyn, SpaceFX, Formantor, Bjorklund, Karpuskl, APCpp, Retroactor, Rompler (sample playback), WTOsc (custom wavetable), Claude (ported MI granular audio processor), BBeats, CStrip, CStripM, EveryTrim, MISVF, TBD03, PolyPad, TBDings (ported MI resonator), TBDaits (Ported MI Macro Oscillator), TBDeeps (ported MI Wavetable Oscillator), DustLoop, Dust, SubSynth, Sine Source, Simple VCA, SDelay, Plate Reverb, Pink Noise, MiVerb, MiVerb2, MiPShift, MiEnsemble, MiChorus, HiHat1, G-Verb, Freeverb, FBDlyLine, EChorus, Progen Reverb, CDelay

Notes: It takes incoming triggers and repeats them - you can think of it as a delay module for triggers. The delay time and the number of repeats can be set with a knob and additionally be CV controlled. Beyond of static delay, the delays of one input trigger can be accelerated or decelerated, leading to the rhythm of a bouncing ball. In another mode, the probability of the output triggers can be chosen.

Different output modes change the assignment of the delays to the eight outputs; either, all delayed triggers for one input trigger are on one output, or the delays go through the outputs 1...8. By this, complex events can be triggered.

Finally, the acceleration and the gate time can be CV controlled as well.

The module is "polyphonic" in a sense, that consecutive triggers at the input don't stop currently running trigger outputs from a previous trigger, but mixing them all. Together with variable delay times and acceleration, highly complex trigger patterns can appear on each of the eight outputs.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Really nice stuff here. The filter circuit from ADDAC's 4 Voice Cluster module gets reimagined as a multi-mode stereo or dual mono filter module. A lot of filter action in just 6hp.

Supplier's Notes:

While developing the ADDAC105 4 Voice Cluster module, a new multimode filter to place after the summing mix stage- and the results were so postitive that it was released as a dedicated filter.

To make it more interesting, the circuitry was duplicated, to be able to use it in a stereo signal path.

To make it more versatile, a switch was added to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.
In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.
This allows immediate sync of both filter frequencies when the Stereo position is engaged.
Optionally there's a jumper in it's back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


Welcome to the world of sound of LYRA-8, the unique organismic analogue synthesizer designed by Vlad Kreimer. "Organismic" means that LYRA uses some principles that lie in the base of living organisms. The way how LYRA's modules interacting between each other and the behaviour of the instrument resembles a live conversation.

LYRA-8 is based on eight generators, which will be referred to as voices. Their design is not like a traditional subtractive synthesis VCO. Instead of having a linear or logarithmic dependency on control voltage, they resemble the tone generators in old electric organs. Hence the use of the term "voices" instead of "VCOs". Lyra uses non-linearity a lot, and the voices are constructed in such a way that allows for non-linearity to express itself.

The voices are divided into four pairs (12, 34, 56, 78). All the pairs are divided in two groups, with two pairs in each (1234, 5678), creating tree-like structure.

The voices can function either in an electric organ mode or in an FM synthesis mode with each of the voices and its envelope acting as a separate FM operator. The voice's impact on FM synthesis will decrease along with the decay of its envelope.

LYRA-8 also has the next blocks:

The HYPER LFO is a complex low-frequency generator, whose waveform is synthesized from two simple LFOs by summation or multiplication of their frequencies. It also has a sync mode. The LFO can modulate the selected pairs of voices and the MOD DELAY.

The MOD DELAY consists of two lines of delay with cross-feedback and a special architecture that enables resonance between the two lines. Each line's delay time can be individually modulated from various sources, including external ones. The delay has a unique possibility of self-modulation where the output signal modulates the delay sample rate, creating cool effects.

The DISTORTION is last in the chain, after the delay. It enables the delay to also influence the distortion.

For all its experimental character, LYRA is a professional instrument. Its output dynamics and frequency response are balanced and ready for a live performance or studio recording without any additional processing.

Notes: A high-quality digital wavetables oscillator

The WAVETABLES module is a digital oscillator that is based of wavetables, a technique that become popular first with the famous PPG synthesizer. Here, a huge number of digital waveforms can be "scanned", resulting in a morphing between a variety of interesting spectral structures.

The module offers seven different table sets, in each of them an interesting spectral move happens via the WAVE knob. Of course, this can be modulated by an external CV too.

To "fatten" the sound, the DETUNE/SPREAD knob adds a second oscillator with a variable detune up to one octave.

Pitch and wave modulation have an attenuator knob to set the amount of modulation, plus a switch to choose between unipolar (modulation CV is added to the current value) or bipolar (modulation swings above and below the current value).

The table position of the currently played waveform has a visual representation by an LED that changes it's color in the rainbow spectrum.

WAVETABLES is based on a quite powerful processor, the output is 16-bit audio, resulting in a high-quality sound.

This module was developed by Paula Maddox from DOVE audio; known by the excellent synthesizers MODAL 002, MODAL 008 and we are proud and happy that Paula offered to contribute this excellent work for the AE modular product line.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Waldorf draw on their proud history with a new wavetable synth building on the classic Microwave 1 and modern Microwave II/XT. Serious synth power from this eight-voice monster.

Supplier's Notes:
M's musical heart is an eight-voice polyphonic, four-part multitimbral WAVETABLE SYNTHESIZER - as boldly blazoned in red across its full-metal blue- coloured casing, itself hinting at its illustrious Microwave heritage - are two wavetable oscillators with independent wavetable-generating Classic Microwave 1 and Modern Microwave II/XT modes, meaning that the wavetable oscillators behave differently in both of those modes (accessible by pressing the Mode button beside the helpful high-resolution graphic display with four endless encoders for yet more hands-on control).

With M, Waldorf are musically returning to their roots by bringing back classic Microwave and 'modern' Microwave II tone generation as a new-generation classic hybrid wavetable synthesizer with an analogue lowpass 24 dB/Oct VCF - SSI 2144 Improved Ladder Type - with resonance and analogue saturation feature, true stereo analogue VCA with panning option, and much more to explore in a desktop-friendly form factor featuring a wide range of unique sounds. Plentiful presets - totalling 2,048 sound programs (divided into 16 banks, each with 128 sounds) - professionally programmed by world- renowned sound designers also include all of the classic Microwave sound sets, such as MW1 Factory Sound Set, MW1 Soundpool 1-5, the fat-sounding Analogue and Bassco, as well as PPG Wave 2.3 sounds cleverly converted for the original Microwave. Moreover, it also features freshly-programmed sounds utilising M's myriad new features - from true hard Sync (when working in its Modern Microwave II/XT mode) to the ARP (arpeggiator) and MIDI-syncable global LFO (Low Frequency Oscillator).

But beating at M's musical heart as an eight-voice polyphonic, four-part multitimbral WAVETABLE SYNTHESIZER - as boldly blazoned in red across its full-metal blue- coloured casing, itself hinting at its illustrious Microwave heritage - are two wavetable oscillators with independent wavetable-generating Classic Microwave 1 and Modern Microwave II/XT modes, meaning that the wavetable oscillators behave differently in both of those modes (accessible by pressing the Mode button beside the helpful high-resolution graphic display with four endless encoders for yet more hands-on control). Consequently, there is no hard Sync or ring modulation available in the Classic Microwave I mode, where 16-bit wavetables are bit-reduced to 8-bit and a 240 kHz non-anti-aliased sample rate is offered, whereas the Modern Microwave II/XT mode offers a 40 kHz sample rate with band-limited wavetables, although both oscillators - OSC 1 and OSC 2 - offer the same panel parameters.

Two LFOs are generating a periodic waveform with adjustable frequency Rate and Shape that can be used for modulation purposes, are also always at hand. However, unlike other Waldorf synthesizers, there is no modulation matrix in M. Making a conscious design decision to set up M's modulation facilities directly on the corresponding display page, to paying tribute to the 1989-vintage Microwave.

Back in the here and now, M takes performance to a whole new level, thanks to that advanced ARP with 16 preset patterns, chord mode, and an ability to synchronise to MIDI clock. Furthermore, four programmable ENVELOPES allow adventurous users to manipulate sound parameters via rate or timed modulations.

Musically making a connection to the outside world is important to any synthesizer, so M offers six (rear panel-positioned) stereo analogue outputs - arranged as MAIN OUT (L/Mono and R) and AUX OUT (A, B, C, and D), the latter of which can be used to route each of the four Multi (multitimbral) parts to different outputs, if desired; a stereo headphone output (with an associated Volume knob in addition to the topside Master Volume knob); 5-pin MIDI IN, OUT, and THRU DIN connectors, complimented by a USB 2.0 MIDI port (for computer connection to transmit and receive MIDI data); an SD Card slot (for updating M's firmware, importing/saving sound patches, and importing/saving M-specific data, such as user wavetables); and - last but not least - a Kensington compatible security lock slot.

Notes: XMIX is a swiss knife for signal mixing and attenuating, offering four(!) mixers and two attenuators in a 1U module. It is designed especially with very small AE systems in mind.

You get:

A three channel mixer "A" with knobs
a passive mixer "B" with four channels
two four-channel mixers "C" and "D" with full level / one-third-level inputs
two attenuators with seven different attenuation levels

All mixers can be used / switched for audio and CV signals.

Notes: Complete system built on Tangible Waves's AE modular format. Includes analogue sound sources, drum sampling, sequencing and everything needed to make music in a single unit.

Supplier's Notes:
The Synth Explorer "Ultimate" is a fully featured modular synthesizer which has been designed primarily for educational purposes. It offers a lot of synthesis features in a very small and portable package and includes the modules that invite for DIY modification and experimentation with code and circuits.

This system includes the following modules:

MASTER I/O (power, MIDI, CV/Gate, Audio in/out)
2OSC/d (two oscillators with sawtooth and square waveforms)
DRUMKIT 010 (lofi drum samples)
2LFO (two low frequency oscillators with various waveforms)
2ENV (two attack/decay envelopes with looping function)
WASPFILTER (an iconic filter with a lot of character)
SVFILTER (a state variable filter which can go into self oscillation)
2VCA (two voltage controlled amplifiers)
BRAEDBOARD (a blank canvas for circuit experiments)
2S&H (dual sample and hold)
2ATT/CV (dual attenuator and CV generator)
MM-DIV (multi mode clock divider)
SEQ8 (8 step CV and Gate sequencer with different run modes)
QUANTIZER (4 channel CV quantizer with many different scale modes)
METER (oscilloscope, frequency spectrum, tuner, voltmeter)
GRAINS (fully programmable module based on the Arduino)
MIXER 4-4 (two 4 channel mixers)
DELAY (analogue delay)
HPAMP (headphone amplifier with dual outputs and volume control)

Notes: With this cable, you can power your Korg Volca synth(s) directly from the VMIX-10, no need for the Volca power adapters! The cable has a standard 5.5/2.1mm plug on both ends plus an adapter to the 4.0/1.7mm plug that fits in the Volca power in socket. Without the adapter, the cable can be used for other 9V devices with 5.5/2.1 socket, as long as they have a "center positive" power socket.

The length is 50cm; perfect for a compact setup with VMIX-10 and a number of Volcas around.

Please note: the Korg Volcas in the photo are not included, they are for demonstration purposes only.

Notes: In certain situations, noise and hum can appear; this is often caused by so called "ground-loops". This happens quite frequently with Korg Volca synths when powered from the VMIX-10 and audio going to the VMIX-10 inputs.

This cable isolates the audio connection, and the noise is blocked.

The cable has 3.5 minijack mono connectors on both ends and is available in two lengths: 50cm and 100cm.

Please note: the synths in the photo are not included, they are shown for demonstration purposes only.

Notes: Want to have a power switch for your AE modular? Here it is; a simple and straightforward cable with integrated switch.

Notes: Fire-themed version of the expressive J-Play Pack from Joue. Based around the idea of making music more organic and natural, the Play Pads transform the J-Play's behaviour, allowing you to control and perform in a range of ways.

Supplier's Notes:
The J-Play transforms your musical experience with a complete system combining an expressive multi-instrument, an intuitive application and interactive content to practice.

A unique playing experience

The J-Play instrument merges the quality of traditional musical instruments with the technology of the digital world. It is sensitive to natural gestures for unparalleled expressivity. It is also a modular instrument, once placed on the J-Play Board, the interchangeable Play Pads instantly transform the instrument into a guitar, keyboard, drums, xylophone or vocal effects station. Each pad has its own bank of instruments. Explore different musical styles and experiment with new sounds thanks to the integrated effects!

With you, everywhere you go, the design of the J-Play has been thought out to adapt to all playing styles. Compact and lightweight, it slips easily into a backpack and follows you on the go. Don't let any musical idea slip away!

Intuitive & powerful app

Create, modify and share your songs in an intuitive way thanks to the included application. No need to spend hours on overly complex music software anymore, the Joue Play application guides you step by step through the process of creating music to make it intuitive. The app has been designed as a simplified music creation software: making music is easy and fun!

The Joue Play app is freely available for Windows, macOS, iPadOS and very soon for iPhone (before end of 2023).

Exclusive content

Practice at your own pace and recreate your favourite songs: each week, a new playable cover track is added to the large collection of well-known covers already available in the J-app. Replay the rhythms of your favourite artists, and get creative by remixing them. Change the sounds, the tempo or add your own rhythms!

Grow with it

The perfect instrument for beginners, a great first step into digital music making for musicians but also a powerful MPE MIDI controller for advanced music producers. The J-Play will always suit your style in accordance with your skills and needs. Discover a whole new way to control your software. Combine all your controllers into one device that will always be at hand in your studio or on stage.

1 wooden board
5 Play Pads (Fire): guitar, piano, drum, audio, keys
USB-C to USB-C cable
Storage bag
J-App included with dedicated tutorials and sound banks

(!) If you want to use your J-Play with an iPad, make sure the port type. USB-C to lightning adapters are available as accessories.

Notes: Gorgeous vintage-style through-zero FM here, featuring five simultaneous waveform outputs, pulse width modulation, soft sync and a dedicated LFO mode.

Supplier's notes:
The EN129 Thru Zero Oscillator is an all analogue triangle-core VCO specialising in frequency modulation. Analogue through-zero FM modulation produces a wide array of timbres particularly useful for bell like or percussive sounds. Through zero linear frequency modulation can be precisely dialled in thanks to a dedicated CV input attenuator and through zero offset control. Logarithmic FM is also available via it's own dedicated input with attenuator and both FM inputs have an LED to indicate incoming voltages. Simultaneous analogue wave outputs include: Sine, Triangle, Sawtooth, Square and Pulse wave with Pulse Width Modulation. The PWM control goes to zero at either end of it's range, which is very useful for creating rhythmic sounds with voltage control. Furthermore the PWM control doubles up as wave shape modulation for the Sawtooth wave - gradually altering the waveform until it shifts half a cycle. The EN129 features Coarse and Fine frequency controls as well as an LFO mode. LFO range is accessed via an LED pushbutton that also acts as the LFO speed indicator - the button will light up when the waveform moves through its positive cycle. A new addition of a Soft Sync Input allows the phase of the oscillator to be controlled by an external oscillator for an even greater range of timbres.

The EN129 is based on the pioneering work by Douglas Kraul and Bernie Hutchins. You can read the original Electronotes article from 1981 that the design is based upon here.

Features:

Soft Sync Input
Thru Zero Linear FM
Logarithmic FM
Zero to Zero PWM
Sawtooth Wave Shape Modulation
Simultaneous Outputs for: Sine, Triangle, Saw, Pulse & Square
Coarse & Fine Controls with LFO Mode
Includes Power Supply Isolation on Frequency Controls
Power consumption: 51mA at +12V and 47mA at -12V

Depth: 22mm

HP : 12

Notes: The Dannysound Dynamics is a compressor / expander originally designed to process drums but, like most processing devices, it can be used for a wide variety of applications.

The module comprises of:

Compressor / Expander
Sub Bass Enhancer
3 Band Inductor-based EQ
Harmonic Exciter

The compressor / expander section uses a discrete transistor-based circuit that allows for soft clipping when overdriven.

The envelope detector is known as a feedforward type of circuit; taking its input from the signal before it goes to the compressor rather than after. This type of circuit is known for having fast attack times.

The Sub Bass enhancer has its own compression circuit that "ducks" the initial transient. This allows the sub bass to be increased without distortion on the transient peaks, increasing the overall level.

There is a MIX control to allow the unprocessed signal to be mixed back in with the processed signal.

The 3 band EQ is an inductor based LCR design. After Dannysound tryed out various EQ topologies, this was the design that sounded the nicest. When overdriven it gives a nice "bite" to the sound, and it has a certain characterful charm that's hard to put into words. The controls have a response that are subtle to begin with and get more pronounced as the controls are increased.

The Harmonic Exciter adds a little distortion to the high frequencies, which bring out the sparkle of cymbals or the snap snare drums. The operating bandwidth can be switched between Low (snare drum snap) or High (Cymbals sparkle).

There are inputs for side chaining and control with an external envelope as well as an envelope out to make the envelope detector output available to drive other modules.

It also features separate inputs and outputs for the Compressor / Expander and EQ sections, so they could be used as 2 separate modules.

Features:

Compressor/ Expander
Sub Bass Enhancer
3 Band Inductor-Based EQ
Harmonic Exciter
Envelope In/Out
Sidechain Input
Seperate In/Out for Compressor, Expander and EQ-Section
Power consumption: 85mA at +12V and 61mA at -12V

Depth: 25mm

HP : 12

Notes: The updated "Skiff friendly" design of the mml filter now features bipolar "Attenu-verters" for the cv controls as well as an all new red mode!

This new mode activates a feedback distortion circuit capable of actually changing the pitch of the notes coming in to the filter in a musical way that adds instant variety to acid basslines, creates weird and strange alterations to drones or adds some nice overdriven distortion to whatever goes into it!

The multi-mode ladder (mml) filter is based on the classic transistor ladder low pass filter by dr. Robert a. Moog. This filter updates the classic 4-pole ladder design to provide band pass and high pass filter responses as well as the traditional low pass filter. There are 2 bipolar controls with attenu-verters for the cut-off frequency plus a cv input for the resonance.

The core of the circuit features a fully discrete transistor design with an op-amp buffered output, this allows soft saturation of the input signal to get the classic overdriven tones of the ladder filter. A bass compensation circuit has been included to retain the bass response in low pass mode when the resonance is increased. The bass compensation also helps to improve the response of the high pass filter.

The red mode is activated/de-activated by holding the mode button for 0.3s. In this mode the filter cut-off, input volume and resonance all interact and the effect is to produce alterations to the incoming frequencies. The pitches of the audio coming into the filter also affect the alterations as well selecting between low pass, band pass and high pass filter modes whilst in red mode.

Features

Low pass, band pass and high pass modes.
Red mode feedback distortion.
CV controlled resonance.
Added low frequency compensation.
Soft saturation of input.
2 x bipolar attenuverter CV inputs.

Width: 6 HP
Depth: 25mm
Power: +12v = 50ma / -12v = 39ma

Notes: The Timbre is a 6HP Eurorack module based on the wave folder section of the Buchla 259 oscillator as implemented in the Music Easel.

The wave folder adds extra harmonics to input signals that have low harmonic content to create rich and interesting timbres. Typical input sources to use would be Sine and Triangle waves but you are welcome to try other sources as well! The Dannysound Timbre adds an extra input to the Buchla design to allow 2 oscillators to drive the wave-folder simultaneously - this dramatically increases the range of possible tones that can be generated and allows the folder to go wild!

Features:

Osc1 / Osc2 Mix - Adjusts the mix between the Oscillator 1 and 2 inputs, also acts as an attenuator if only one input is used.
Timbre Control - Adjusts the overall amount of wave fold
Timbre CV - Bipolar (attenuator) controls the Timbre CV input
Symmetry - Adds an offset to the input so that the top half of the wave begins to fold earlier
Blend - Mixes between the clean and effected sound

Power consumption: 46mA at +12V and 48mA at -12V

Depth: 25mm

HP : 6

Notes: The Looping VC-ADSR is a 4-stage, loop-able, envelope generator based on the ENVGEN 8C IC from Electric Druid. The individual sections of the Envelope (Attack, Decay, Sustain, Release, Level and Time) can all be individually controlled via CV.

The module has 5 MODES of operation that can be selected via the pushbutton LED switch with the status indicated by the five LEDs above:

Normal Envelope - Gate signal at the GATE/TRIG input, fires the ADSR.
Trigger Mode - Trigger signal at the GATE/TRIG input fires the AD portion of the envelope. The sustain control determines the final value the envelope rests at after the decay portion has ended.
Gated Looping Envelope - ADSR loops whilst gate signal is high.
Looping Envelope - ADSR loops regardless of gate signal.
LIN response (Hold switch to select between LIN/EXP Mode) - Sets the envelope response to be Linear. The response is Exponential when the status LED is off.
When the envelope is looping, all 5 controls affect the output. Attack and Decay operate, as one would expect. The Sustain control sets the minimum voltage the decay part of the envelope will decay to. The Release sets a release time from the end of the Sustain period to the beginning of the next cycle. When the Sustain is set to 0 you can use the Release control to add a delay between the Attack and Decay cycles.

In Normal Envelope mode the Sustain CV input can be used with an LFO source to add amplitude modulation that gradually increases as the Envelope transitions from the Attack/Decay part of the envelope into the Sustain part. The Level CV is also a useful point for amplitude modulation or can be used for Velocity Sensitivity via CV.

The Time CV is set so that increasing voltage shortens the overall envelope time to better mimic the sounds of percussive instruments.

Features:

5 Modes of Operation: Gate Input ADSR, Trigger Input ADS, Gated Loop, Constant Loop and EXP/LIN Envelope Responses
CV over: Attack, Decay, Sustain, Release, Level and Time
Works with Gate or Trigger Signals from +5V to +12V
CV Input Range 0V to +10V
Output CV Range 0V to +10V


Power consumption: 28mA at +12V and 18mA at -12V
Depth: 25mm
HP : 6

Notes: The Dannysound VU Meters is designed to be used with 2 x Dynamics modules. The modules connect internally via 2x3 pin ribbon cables. The meters provide a visual representation of various signals within the Dynamics modules making settings easier.

Features:

External input sockets for monitoring external sources.

Switch to select high or low meter sensitivity or off if the clicking needles get annoying!

Monitoring of the compression/expansion amount.

Monitoring of the unprocessed input level.

Monitoring of the compressor/expander output level.

Power consumption: 0.03mA at +12V and 83mA at -12V at and 3mA at +5V
Depth: 51mm
HP : 8

Notes: The Wireless PRO is the ultimate wireless microphone, packed full of powerful features that offer incredible flexibility for recording pristine audio for your content. Never lose a take with 32-bit float on-board recording, keep all your video and audio flawlessly synchronised with timecode, and capture incredible-sounding content effortlessly with intelligent GainAssist technology. The Wireless PRO delivers everything you could possibly want from a compact wireless microphone system, and much more.

State-of-the-art Wireless Audio

RODE pioneered the ultra-compact wireless microphone category with the original Wireless GO and this legacy carries on with Wireless PRO. Utilising state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, it delivers crystal-clear, incredibly stable audio with a range of up to 260m. Wireless audio you can rely on in almost any recording application.

Never Lose a Recording

There's nothing worse than pulling your audio into your editing software and realising your recording clipped and can't be used. With the Wireless PRO, this is a thing of the past. 32-bit float on-board recording means your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too loud or too quiet. Never worry about setting your gain perfectly again. Gamechanger.

Audio and Video, Perfectly in Sync

With the Wireless PRO's timecode capability, you can perfectly synchronise your audio and video with ease - no need for complex and expensive external timecode systems.

Pristine Audio in Any Situation

In addition to its 32-bit float on-board recording, the Wireless PRO offers a plethora of features that promise pristine audio in any situation. Ensure your audio is smooth and balanced with intelligent GainAssist technology. Precisely match your mic to your camera with flexible gain controls and tailored presets. Add an extra layer of protection with the safety channel. Perfect recordings, every time.

The Ultimate Pro Recording Kit
The Wireless PRO comes with everything you need to get set up and recording wireless audio right out of the box. Included are two professional Lavalier II microphones that are perfect for recording on-screen talent, as well as furry windshields for outdoor use, a pair of MagClip GO to attach your transmitters anywhere, a smart charging case and a handy accessory pack to store your lavs, cables and clips.

Connect to All Your Devices

Thanks to its analogue (3.5mm) and digital (USB-C) outputs, the Wireless PRO is universally compatible with cameras and other audio devices, both iOS and Android smartphones and tablets, and Windows and Mac computers.

Easy Configuration and Control

Check your audio levels at a glance with the bright LCD display and configure settings on the fly with dedicated controls for everything from gain adjustment to triggering recordings. Customise the system to your needs anywhere using your computer or smartphone with the RODE Central app. Complete control over your setup, so you can be ready for any recording situation.

Monitor and Record

Monitor your audio in the field with the Wireless PRO's high-power headphone output, complete with on-board level control, or connect a headset or narrator microphone such as a lavalier to capture a third audio track. Ultimate versatility.
Specifications Acoustic & Electrical (Wireless PRO)

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Maximum SPL: 123.5 dB SPL
Equivalent Noise (A-Weighted): 22 dBA
Signal-to-noise Ratio: 72 dB
Analogue Inputs: 3.5mm locking TRS (TX)
Analogue Outputs: 3.5m TRRS (RX)
Transmission Range: 260m (line of sight)
Digital Connectivity: USB-C
Operating System Requirements: macOS 10.15 above, Windows 10 and above, iOS 14 and above, Android 11 and above
Power Requirements: In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time: Up to 7 hours

Acoustic & Electrical (Charge Case)
Mechanical
Battery Capacity: 4200 mAH
Power Requirements: 5V/3A via USB-C
Charging Time: 2.5 hours
Charge Current: 2A (maximum)
Total charges (TXs and RX): 2 complete charges
Connection Type: USB-C (SuperSpeed USB-C cable required for optimal data transfer speeds)

Mechanical
Weight (grams)
TX: 35RX: 36
Charge Case: 177
Total: 284

Dimensions (millimetres)
TX: 46.5 (W) x 44 (L) x 20 (H)
Charge Case: 101 (W) x 82 (L) x 70 (D)

What's in the Box:

Wireless PRO TX
2 x Transmitter
30cm USB-C Lightning Cable
1 x SC21
30cm USB-C to USB-C Cable
1 x SC22
Premium Lavalier Microphone
2 x Lavalier II
Magnetic Clip for Wireless GO
2 x MagClip GO
Furry for the Wireless Go II
3 x Furry
Wireless PRO Receiver
1 x Receiver
Wireless PRO Charge Case
1 x Charge Case (PRO)
Wireless PRO Accessory Case
1 x Accessory Case
SC34 USB-C to C SuperSpeed Cable
1 x SC34
3.5mm TRS Patch Cable
1 x SC2

Notes: ***B-STOCK: Sleeve damaged, but product is in excellent condition and in perfect working order***


Third-generation version of Arturia's great value controller keyboard, available here in its 61-key format. Pads, transport buttons, faders and rotaries give you control over all your settings.

Supplier's Notes:
Arturia's new KeyLab Essential 3 offers a new level of accessible, enjoyable, and creative music making, redefining the essence of a modern universal keyboard controller.

From its refreshing new design, to its vastly upgraded creative workflow, to an expanded software package, it promises to shake up the affordable controller market by empowering modern musicians and sound explorers looking to expand their setup without breaking the bank.

Main selling points

Fit for any style and any setup

For DAW producers, musicians with hybrid setups, or performers using hardware; enhance any creative setup or musical style with MIDI out & USB power, deep DAW compatibility, and premium software.

The new standard for affordable keyboard controllers

A keyboard controller that doesn't need tons of controls, menu diving, or complex configuration to operate. KeyLab Essential 3 looks modern, feels great, and removes creative barriers for next-level music making.

Directly-linked with Arturia's industry-leading software ranges

Many musicians and producers will be familiar with Arturia's award-winning software; KeyLab Essential 3 is part of the same range, seamlessly integrating with Analog Lab V, Pigments, and V Collection.

Features

Premium Keybed quality
61 note velocity-sensitive keyboard with hybrid synth-piano feel

Pads & controls
1 clickable encoder, 9 rotary encoders, 9 x 30mm faders, 8 transport switches, 4 command switches, 1 modulation wheel & bend wheel, 8 touch & pressure-sensitive pads

Display control
2.5" LCD display with contextual buttons
Real-time feedback on tweaks and controls
Smart features

Multi-mode arpeggiator
Chord mode
Scale mode
Hold function
Semitone transpose

Software integration
Seamless integration with Analog Lab V: select sounds, browse presets, smart-assigned controls
Custom DAW scripts for FL Studio, Logic Pro, Ableton Live, Cubase, Bitwig Studio
Also compatible with MCU/HUI control
Up to 6 user presets for a totally customizable experience

Included Software titles & services
Analog Lab V software with 2000+ sounds
Ableton Live Lite
Native Instruments' The Gentleman
UVI Model D
2-month Loopcloud subscription
Melodics subscription for 40 lessons

Connectivity
USB-C connects to computers and MIDI Control Center
MIDI 5-pin DIN output for connection to external instruments, gear
Control input for pedal: sustain, expression, or footswitch
USB-C powered

Platform specifications

Windows
Win 10+ (64bit), 4 GB RAM, 4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost), 3GB free hard disk space, OpenGL 2.0 compatible GPU, ARM processors not supported on Windows

Required configuration
Works in Standalone, VST, AAX, Audio Unit, NKS (64-bit DAWs only).

Apple
Mac OS 10.13+, 4 GB RAM, 4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost) or Apple Silicon CPU, 3GB free hard disk space, OpenGL 2.0 compatible GPU
Work with ASC
An elegant and simple solution to help you install, activate, and update your Arturia software instruments.

What's in the box

Box content
KeyLab Essential Unit
USB-A to USB-C cable
Registration card

Dimensions for 61 keys

Size : 35 x 9.45 x 2.76 inches (890 x 240 x 70mm)
Weight : 6.8 lbs. (3.08 Kg)

Notes: 8-input CV expander for Xer Mixa

Expando Expandi adds 8 freely assignable CV inputs to the Xer Mixa in just 4 HP. Connect up to two Expando Expandi to Xer Mixa for easy CV control over channel levels, pan, aux sends, and more.

Expando Expandi is not for use on its own and is currently compatible only with Xer Mixa.

Notes: One of the most ambitious mixers in the Eurorack realm, Noise Engineering's Xer Mixa features a hybrid design with eight stereo inputs plus two stereo aux ins, digital control (including state save/recall), analogue summing and optional CV support via the Expando Expandi module. Immense.

Supplier's Notes:
All-analogue, digitally-controlled mixer with 10 stereo inputs, three stereo outputs, clickless mutes, save and recall, MIDI, and CV via expanders.

Xer Mixa is a mixer with 10 stereo-paired inputs, three stereo-paired output busses, tactile controls, and a 100% analogue signal path with low noise and crosstalk, pristine sound quality, and ultra-high headroom. A digital control interface harnesses the true power of hybrid design, allowing for state save and recall, per-channel pan law and pre/post send settings, multichannel editing, and MIDI I/O.

Xer Mixa features 8 interactive fader-controlled channels and two aux inputs, all with clickless mutes. Configuration options abound for per-channel pan-law settings, pre- or post-fader sends, and channel settings are made simple with the screen. Settings can be saved into preset slots for easy recall for performances or sessions.

Xer Mixa is a compact 32HP, with a streamlined and easy-to-use interface. CV control over almost any parameter is available through the rear-panel connecting Expando Expandi, which adds CV 8 inputs to Xer Mixa. Connect up to two Expando Expandis for easy CV control over channel levels, pan, aux sends, and more. Xer Mixa and Expando Expandi are available together as a discounted bundle, or individually.

Whether you have a massive studio rig or a compact performance system, Xer Mixa is the perfect choice for an expressive mixer.

Notes: All-analogue, digitally-controlled mixer with 10 stereo inputs, three stereo outputs, clickless mutes, save and recall, MIDI, and CV via expanders.

Xer Mixa is a mixer with 10 stereo-paired inputs, three stereo-paired output busses, tactile controls, and a 100% analogue signal path with low noise and crosstalk, pristine sound quality, and ultra-high headroom. A digital control interface harnesses the true power of hybrid design, allowing for state save and recall, per-channel pan law and pre/post send settings, multichannel editing, and MIDI I/O.

Xer Mixa features 8 interactive fader-controlled channels and two aux inputs, all with clickless mutes. Configuration options abound for per-channel pan-law settings, pre- or post-fader sends, and channel settings are made simple with the screen. Settings can be saved into preset slots for easy recall for performances or sessions.

Xer Mixa is a compact 32HP, with a streamlined and easy-to-use interface. CV control over almost any parameter is available through the rear-panel connecting Expando Expandi, which adds CV 8 inputs to Xer Mixa. Connect up to two Expando Expandis for easy CV control over channel levels, pan, aux sends, and more. Xer Mixa and Expando Expandi are available together as a discounted bundle, or individually.

Whether you have a massive studio rig or a compact performance system, Xer Mixa is the perfect choice for an expressive mixer.

Notes: 8-input CV expander for Xer Mixa

Expando Expandi adds 8 freely assignable CV inputs to the Xer Mixa in just 4 HP. Connect up to two Expando Expandi to Xer Mixa for easy CV control over channel levels, pan, aux sends, and more.

Expando Expandi is not for use on its own and is currently compatible only with Xer Mixa.

Notes: Sound your best anywhere

A great interface is the one that's always there for you. iRig HD X is the new flagship of the iRig guitar interface family, bringing breathtaking sound quality and even more advanced features to guitarists everywhere. Compact enough to store in your gig bag, iRig HD X lets you connect anytime with inspiring new ways to play and sound amazing.

Practice with popular learning apps or favorite songs. Browse and discover thousands of new tones on ToneNET. Record ideas wherever inspiration strikes. Stream videos of you jamming to backing tracks. Warm up before gigs with all your favorite tones. No matter where you are on your musical journey, with iRig HD X the possibilities are endless.

Your new mobile dream rig

iRig HD X + TONEX and AmpliTube for iPhone and iPad gives you an incredibly versatile mobile rig with 2 powerful ways to find your sound: TONEX using IK's AI Machine Modeling technology, and AmpliTube offering the ultimate tone processing and recording studio. Play, practice and record on your mobile device with the most authentic and hyper-realistic gear models ever made.

Ultra-compact, high-quality audio

iRig HD X features a whisper quiet and transparent instrument preamp with wide frequency response and dynamic range that ensures every nuance of your playing is accurately translated while preserving the true tone of your instrument. The Headphone Out and Amp Out are equally high end offering exceptional sound quality in a device this portable.

One knob to do it all

iRig HD X sports an all-new enclosure featuring a LED ring input level indicator that also doubles as an ultra-fast and precise tuner for the connected instrument. Its ergonomic, multi-function knob lets users quickly adjust headphone level, loopback functions, direct monitoring and the tuner.

Reach your guitar goals faster

Practicing should be fun. With iRig HD X you'll be inspired by professional guitar tone while you learn. From anywhere, easily connect to the most popular learning apps while playing through the best amp models. Use the included TONEX and AmpliTube apps to load one of your go-to tones then launch your preferred app to study music, tabs or the original song. It's that easy!

Discover the best tones online

iRig HD X comes with AmpliTube 5 SE with 80 models covering all the "must have" gear. You also get TONEX SE for Mac/PC and iOS, which includes 200 Premium Tone Models plus unlimited user Tone Model downloads from ToneNET. You can browse, demo and download new guitar and bass tones within TONEX or build the ultimate guitar rig with AmpliTube 5.

Have fun playing along

Imagine finding perfect guitar tones from ToneNET for songs you love. Got a few minutes to play? Just plug-in and open up AmpliTube or TONEX and start jamming with incredible tone. No need to plug in a pedalboard or out-board gear. Play along with backing tracks on YouTube or from your music library or streaming service. Staying inspired has never been this easy.

Jamming and performing with friends

With iRig HD X it's easy. No more lugging a pedalboard to rehearsal spaces. All you need is right in your gig bag. Just show up and connect the Amp Out jack to an external amplifier or powered monitor. Everyone will be amazed by your tone as you load favorite AmpliTube presets or TONEX Tone Models from your iOS device (or laptop).

Recording audio tracks

iRig HD X is recognized by all desktop and iOS recording apps. TONEX and AmpliTube for Mac/PC work standalone or as plug-ins inside your favourite DAW so it's easy to record a DI or a processed guitar part. You can use the Loopback+ feature of iRig HD X (which acts like a virtual FX loop) to route your guitar signal first to TONEX or AmpliTube and then into your recording app.

Recording and streaming Video

The same feature that lets you record processed audio on your mobile device also lets you record or stream video with your amazing guitar tones sounding crystal clear. Use the Loopback+ feature of iRig HD X to route your guitar signal first to TONEX or AmpliTube and then into the video recording App on your iPhone or your streaming App of choice. You fans will love how great you sound.

With more ways to connect on more devices and with all your favourite apps, iRig HD X is your all-access pass to limitless musical experiences.

Ideal for all players

Whatever your level and style of music, iRig HD X will keep you connected to the newest and best tools for sounding great, learning new songs, advancing as a player and sharing the music you make with others. Sound better, play more and improve faster throughout a lifetime of guitar with iRig HD X.

Specifications

Common
AD and DA resolution: 24-bit
Sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Host connection: USB Type-C socket

Instrument Input
Input impedance:1 MOhms
Maximum input level: +9 dBu
Frequency response: From 20 Hz to 20 kHz within 3 dB (96 kHz sample rate)
Dynamic range: 115 dB(A)

Amp Output
Configuration: Unbalanced
Output impedance: 3.3 kOhms
Output level: 0 dBFS corresponds to -2 dBu
Frequency response: From 15 Hz to 40 kHz within 1 dB (96 kHz sample rate)
Dynamic range: 97 dB(A)

Headphone Output
Output impedance: 22 Ohms
Maximum output level: approx.. 8 mW into 32 Ohms load
Frequency response: From 15 Hz to 40 kHz within 1 dB (96 kHz sample rate)
Dynamic range: 95 dB(A)

Package includes
iRig HD X interface
USB-C to USB-C cable (60 cm/23.62")
USB-C to Lightning cable (60 cm/23.62")

Dimensions
Size: 99 mm/5.35" x 42 mm/2.27" x 25 mm/1.35"
Weight: 54 g/1.9 oz.

Compatibility

iOS Devices
Made for: iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone SE (2nd and 3rd generation), iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Air (3rd, 4th and 5th generation), iPad (9th generation), iPad mini (5th and 6th generation), iPad Pro 12.9-inch (1st, 2nd, 3rd, 4th and 5th generation), iPad Pro 11-inch (2nd and 3rd generation), iPad (8th generation), iPad Pro 11-inch, iPad Pro 10.5-inch, iPad Pro 9.7-inch, iPad Air 2, iPad Air, iPad mini 4, iPad mini 3, iPad mini 2, iPad (5th, 6th and 7th generation), iPod touch (6th and 7th generation).
Also compatible with all newer iPhone, iPad and iPod touch models.

Computers
Macr: macOS 10.6 or later. One free USB port.
Windowsr: Windows 10 or later. One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed.

Notes: 1U TRS

Total flexibility for the Befaco 7U or Intellijel cases rear connectors Jacks.
The channels are reversible and can be used independently for Input or Output.
4 Inputs or Outputs (per module) can be obtained by "AND" cables.
Independent tip and ring attenuators are selectable for each channel to convert the Modular Input Level to Line Output Level.

Features

Selectable attenuator per channel
Fully compatible with Intellijel's 7U and Palette cases.
1U Intellijel format.

Specs

Current needs: Passive
Width: 6 HP
Depth: 20 mm (including power connector)
Designed, kits prepared and completed modules assembled in Barcelona

Notes: A breakout module for the Trolley Bus power system, the On/Off includes a DC input, power switch, two USB charging sockets and four LEDs to confirm the different voltage outputs are working.

Supplier's notes:
Trolley Bus

Ready to feed the most modern and power-hungry modules.

A 5A power solution, 28 slots powered by four high-quality DC-DC converters.

ON/OFF 4HP - 3U module with 2 USB-A charging ports and a Power Button.

Friendly Plug and Play, tools are not required.

Features
25 mm height over regulators grid and 15 mm height on the rest of the bus
Horizontal connectors to maximize space
2,5mm barrel power connector
On/Off 4HP module
2 USB-A charging ports

Specs
Power brick: 135W 2.5mm Barrel connector center positive (included)
Current: +12V: 5A, -12V: 2,5A, 5V: 4A
Measurements: 423 mm x 80mm
Designed, kits prepared and completed modules assembled in Barcelona

Notes: A hugely powerful all-rounder, the Trident combines amp modelling with effects and looping, offering a rock-solid combination of features in a rock-solid die-cast aluminium case. A big step up from the cheaper Cerberus pedal.

Supplier's Notes:
Trident is the flagship integrated effects and amplifier simulation pedal from NU-X, built into a one-piece die-cast aluminium pedal housing to withstand the rigours of the stage and road. Using the new proprietary TSAC-4K physical modelling algorithm, with separate dedicated DSP engines for effects and amp simulation, the Trident employs premium AD/DA conversion hardware for accurate sound reproduction with minimal noise levels. Each of the 27 amplifier models faithfully emulates its real world counterpart with authentic features and functions, such as high/low inputs, cable jumping and toggle switch settings. Add to these 27 cabinet simulations and 4 microphone models and you have a wide palette of classic backline to conjure with. A full compliment of effects including boosters, filters, modulations, delay and reverb are available, with on-the-fly adjustments and foot switching easily from the top-side control panel. Current status and settings are neatly displayed in real-time on the backlit LCD display which is bright and clear for easy viewing on stage. Additional effects can be patched in via the send / return loop, which has serial or parallel modes and can also be used for connecting to an amplifier using the 4-cable method, or as a send-only output using branch mode. Full MIDI implementation is accessed through MIDI in and out for integration with external MIDI and switching gear. For interfacing with a Mac or PC computer, a USB type-C port can be used as a recording interface or for programming the Trident using the free to download Trident™ editing software. Additional connections on the rear panel include an expression pedal input, 3.5mm auxiliary input, 6.3mm headphone output, 2 x XLR outputs and 2 x 6.3mm outputs to support the many various wiring configurations. Overall, Trident is the complete war machine to launch your sonic attack with.

MIDI compatible (5-pin DIN adaptor leads supplied)
USB port for PC/Mac editing, audio interface and firmware updates
30 second phrase looper with pre and post routing
Trident™ Edit software free to download from www.nuxefx.com/trident.html
High resolution TSAC-4K physical modelling
Selectable amp & effects block order
Heavy duty cast aluminium housing
32 additional IR slots for custom cab simulations

Power supply9Vdc, 500mA, pin-negative (mains adaptor included)
Current consumption<330mA
Inputs: Exp pedal, Guitar, Return (6.3mm), Aux input (3.5mm)
Outputs: Send, Headphones, Out 1+2 (6.3mm), Out 1+2 XLR
Input impedance: 1M Ohm (guitar), 100k Ohm (return jack)
Output impedance: 1k Ohm (Out 1, Out 2, Send)
Aux Input Impedance: 10k Ohm
Headphone output: 6.3mm stereo (47 Ohm)
Dynamic range: 109dB
Latency: 1ms
Sampling format: 48kHz, 32-bit
USB port: Type-C PC/Mac interface
Dimensions: 312 x 164 x 65mm
Weight: 1.65kg

In the box

The box for this item contains:

Trident integrated amp modeller and effects pedal
9Vdc 500mA power adaptor
2 x 3.5mmm to 5-pin DIN adaptor MIDI leads
USB A to C cable

Notes: Transcend musical boundaries with the Aeros Gold Edition looper pedal. Create, perform and record both parallel and sequential loops. Dual modes and quantization options adapt to your playing style. Intuitive hands-free navigation and silent footswitches offer a superior playing experience.

The Aeros Gold Edition is packed with powerful, innovative features. Use the built-in Mixer Mode to adjust track volumes on the fly. Import your own backing tracks to fuel your performance. Loop without stress thanks to error-friendly features like auto quantize, Intelligent End-of-Measure Forgiveness, and easy undo/redo commands. The Aeros Gold Edition can serve as a MIDI transmitter (Master) or receiver (slave) sending and receiving a plethora of MIDI commands like time signature, transitions, start/stop and more.

Utilize built-in effects like auto-fade in/out, reverse track and loop decay. Record up to 20 minutes of mono audio per track (10 hours per song). The Aeros Gold Edition elevates recording and songwriting with studio-grade 24-bit audio and 32-bit floating point processing. Operate line and instrument levels, send your inputs anywhere, and select between stereo and mono audio.

Parallel and Sequential Looping Capabilities
Write complete songs with multiple tracks
On-board Live Mixing View
Adjust track volumes on-demand
Flexible Dual Playing Modes
2x2 and 6x6, for boundless creativity
Innovative, Adaptive Dynamic Read Memory
Record up to 10 hours in mono
High-res Touch Screen Display
Access your features with ease
Colour-coded Cues and Waveforms
Stay locked in to your performance
Industry-leading Loop Capacity
Up to 36 in a single song
Industry-Leading Memory System And Connection

If you have a BeatBuddy or MIDI Maestro, Aeros will sync with them automatically via MIDI. Once connected, auto quantize your loops to the measure of the beat, utilize powerful Aeros functionality with a single button press and more. The built-in Quick Start Guide will get you up and running fast, and detailed changelogs keep record of every new command.

Take songwriting and performance to the next level. Spark your creativity and do more of what you love. Aeros users get access to feature-packed Firmware Updates, bringing diverse new abilities to your looper pedal. You can download them over Wi-Fi with one press.

Technical Specifications

Type: Looper Pedal with Digital Mixer
Looper: 6 x Song Parts, 6 x Stereo Tracks, Unlimited Song Memories
Looping Time: 20 Minutes Mono (1-track), 48hrs Mono (Max Memory w/ 32GB Card)
Effects: Reverse, Fade In/Out, Loop Decay
Channels: 4 (L/R Main + Aux L/R)
Faders: 7 x Digital

Signal Processing: 32-bit Floating Point
Sample Rate: 44.1kHz
Bit Depth: 24-bit
Inputs: 2 x 1/4" (L/mono, R), 1 x 1/4" TRS (Stereo Aux)
Outputs: 2 x 1/4" (L/mono, R), 1 x 1/4" TRS (Stereo Aux)
MIDI I/O: 5-pin In/Out
USB: 1 x Micro-B
Other I/O: Wi-Fi, Bluetooth
Bypass Switching: Digital Dry Through
Storage: Internal, SD Card (up to 32gb, Not Included)
Screen: 4.3" Diagonal, Touch Enabled

Power Source: 9V DC Power Supply (Included)
Power Usage: 300mA

Height: 2.2"
Width: 7.8"
Depth: 5.6"
Weight: 2 lbs. 4 oz.

Notes: ***B-STOCK: Product has light surface marks/scratches, but otherwise in perfect working condition***


At 84hp wide the NiftyCASE isn't super tiny or super huge, in fact, it's just right for all of the cardboard boxes bought to ship it to you in. Aside from the 84hp width NiftyCASE features ample +12v -12v and +5v power for your modules. It will also take Din MIDI from any DIN MIDI device and USB MIDI from your computer and turn it into eurorack compatible CV, gate, mod, and clock.

MIDI to CV, gate, clock, and mod

It's all built into the case. Make your instrument and don't waste precious hp (space for modules) on power and MIDI tools. you can plug NiftyCASE into your computer via USB or 5pin MIDI DIN device and send it MIDI. It will convert it into CV, gate, mod, and clock. Sequence with your DAW, jam with your controllers, or do something wacky, NiftyCASE has got you covered.

Power

Built-in power saves space for more of your modules, and keeps things good and easy.

As is, you can plug up to 10 modules into NiftyCASE's 10 gang flying bus that provides a peak 1500mA of +12v, 500mA -12v, and 500mA +5v, covering all industry standard power requirements

Specs:
Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5(off = 0 on = 4.65)
Voltage output gate 2 - off =0 on =5(off = 0 on = 4.65)
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4" ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB

Included in the box:

NiftyCASE
NiftyCASE switching power supply with blades for NA, EU, UK, and AU

* Please note that the right and left sides of NiftyCASE fit very flush. It is recommended to favour a module with a pcb 1mm or more narrower than it's front panel for use on the left and right sides of the case (this amount or more of tolerance is fairly common on many modules).

** The NiftyCASE power supply is designed only to power modules that are being used in the NiftyCASE. Modifying the case or using it otherwise to power external cases & external modules is not advised.

Notes: Limited-edition black version of Arturia's top-of-the-range monophonic Brute. Ultra-creative matrix-based analogue synth engine with dual multi-mode filters.

Supplier's Notes:
MatrixBrute

Analogue Avant-Garde

MatrixBrute is arguably the most powerful analogue monophonic synthesizer ever! As flexible as a modular system but offering presets, MatrixBrute is a dream machine for everyone interested in creating a sound palette of their own.

When was the last time you felt your heart beating faster?

When was the last time you heard sounds you had never heard before?

When was the last time you met an instrument that truly inspired pleasure and creativity?

MatrixBrute is an outstanding analogue synthesizer. Offering three Brute oscillators, a Steiner-Parker filter and a ladder filter, five analogue effects, and the incredible modulation matrix, it is a massive sonic beast.

Distinction in design

The heart of the MatrixBrute is its unique modulation matrix that allows you to create your own routings. You can invent a sound palette of your own that will be sure to be heard in any mix!

The matrix can also be used to recall your presets. So go on stage, and select any of the 256 presets instantly! No menus or awkward selection screens, everything is at your fingertips.

As if it was not enough, the matrix is also made to program and play sequences. This is no ordinary step-sequencer. With its ability to also be used as a modulation source, sounds evolve in melody and texture, Just the way you want.

Hands-On Heaven

The digital brain for MatrixBrute's analogue heart

The Matrix is where MatrixBrute's analog reactivity and digital precision collide - an advanced architecture unlike any synth before it.

Sound beyond the power
Offering a audio signal path that is 100% analogue, MatrixBrute also features true analogue effects. The MatrixBrute gives you the sonic quality and power of a vast modular synthesizer but with the flexibility of presets along with a great arpeggiator and an advanced sequencer.

What's in the box

Box content:
MatrixBrute unit
Power cable
Instrument dimensions
Size : 33.8 x 17 x 4.2 inches (860 x 432 x 107mm)
Weight : 44lbs (20kg)

Main Features
Analogue Matrix Synthesizer
256 Preset memory locations
Two Analog Exponential VCO's
Saw + UltraSaw
Square + Pulse width
Triangle + Metalizer

Sub
One Analog Linear VCO/LFO
Saw, Square, Triangle, Sine waveforms
LFO time divisions

Key track
VCO 2>1 Hard Sync

Audio Mod
VCO1>2
VCO1 < VCO3> VCO2
VCF 1 < VCO3> VCF 2
VCF1 < Noise> VCF2

Noise Generator
White; Pink ; Red ; Blue noise types
5 input Audio Mixer with Filter routing
Steiner Parker filter with 12+24 db per octave modes
Drive; Brute factor; Low Pass, High Pass, Band Pass, Notch
Ladder filter with 12+24 db per octave modes
Drive ; Brute factor; Low Pass, High Pass, Band Pass

Two LFO's
Sine, Tri, Square, Ramp, Saw, Random, S&H

Three Envelope Generators
Two Attack, Decay, Sustain, Release
One Delay, Attack, Decay, Sustain, Release

External Audio In
16x16 Matrix modulation panel

64 step sequencer
STEP enable, Slide, Accent, Modulation
Save and recall sequence patterns on the fly

Analogue Effects
Stereo delay, Delay, Flanger, Chorus, Analog Reverberator

Arpeggiator
12 CV / Gate Inputs/Outputs

Audio Input, Line or Instrument level

Stereo audio output
MIDI and USB I/O
Pedal inputs for Expression and Sustain

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Ultra-high-quality audio interface with unbeatable versatility. Up to 94 channels I/O, 64 MADI channels, DSP and extensive digital options including two optical ADAT I/Os.

Supplier's Notes:
RME Fireface UFX III: The Flagship Multi-channel Interface

The Fireface UFX III is a powerful all-in-one solution for modern recording studios, live audio playback systems and multi-channel location recording rigs, handling up to 188 channels (94 Inputs / 94 Outputs) with ease.

Unprecedented flexibility and compatibility combines with RME's famous low latency hardware and driver designs, guaranteeing flawless operation for any multi-channel recording application, whilst the inclusion of DURec (Direct USB Recording) provides extensive options for backup recordings and stand-alone operation.

The ultimate professional tool for multi-track recording, mixing and mastering, the RME Fireface UFX III is packed with professional features including:

USB 3.0 (full 94 channel I/O Class Compliant; USB-C compatible)
SteadyClock FS
Powerful integrated DSP
TotalMix FX
TotalMix Remote
DURec (Direct USB Recording)
MADI I/O (64 channels)
And support for the Advanced Remote Control USB (sold separately)

Powerful USB 3 Performance

The front panel of the Fireface UFX III provides four high-performance XLR/TRS combo inputs for microphone, instrument and line signals, two stereo headphone jacks with +19 dBu output level, MIDI I/O, and a USB port.

In combination with the DURec function (Direct USB Recording), the USB port allows independent recording of selected input and output signals (up to 80 channels) to a connected USB storage medium.

The rear panel reveals the full connectivity of the Fireface UFX III. Besides another MIDI I/O, the two optical ADAT I/Os, an AES/EBU I/O, and eight balanced analogue outputs with line level (including XLR stereo monitor outputs) are available.

With the new Multi-Mode, the two ADAT I/Os can be used as separate optical SPDIF inputs and outputs in addition to the AES I/O. Furthermore, the Fireface UFX III offers an optical MADI interface (SC) with 64 bidirectional channels. The Word Clock connectors (BNC) work as additional coaxial MADI input and output if required.

Comprehensive MADI Connectivity

The Fireface UFX III opens the doors to a host of RME and 3rd party digital and analogue I/O solutions.

Expanding your analogue channel count, the ability to route/mix within the digital domain through numerous sources presents many flexible options. Multiple external MADI devices can also be connected in series.

To further enhance MADI flexibility, the Fireface UFX III boasts some typical RME-style features. For example in USB 2 mode, which is limited to 30 channels I/O (12 analogue plus 16 ADAT plus AES), the MADI I/O is still available via RME's integrated hardware mixer TotalMix FX.

Word Clock I/O (BNC) can be switched to MADI I/O (coaxial), and a special split mode even supports the use of both MADI I/Os simultaneously, with 32 channel each on optical and coaxial.

SteadyClock FS - FemtoSecond Clocking Technology

The RME Fireface UFX III also features RME's latest digital clocking and jitter rejection technology, 'SteadyClock FS'.

Originally developed for RME's award-winning ADI-2 Pro FS range of high-end converters, SteadyClock FS reduces intrinsic jitter to a new all-time low, when converting to and from analogue over all digital formats.

All clock modes provide excellent performance and astonishingly high-quality analogue conversion, allowing you to hear your mix exactly as it is.

What's more, RME's digital format conversion occurs without any loss to the signal, and SteadyClock FS ensures your sonic image will never experience any kind of degradation, ensuring the soundstage is replicated to the fullest depth and clarity.

Powerful Applications for Mixing, Monitoring and Measurement included

The Fireface UFX III comes with the TotalMix FX DSP mixer, offering comprehensive routing and monitoring options for all analogue and digital audio channels, as well as the DIGICheck Analyzer, which allows users to measure and analyze digital audio data feeds (in both directions) with maximum precision.

TotalMix FX can completely replace an external mixer, enabling the creation of multiple latency-free monitor mixes with EQ, Dynamics, Reverb and Delay for any outputs, including main monitors, submixes, and headphone mixes for musicians.

A free companion app, TotalMix Remote is a network-controllable remote for TotalMix FX, enabling control over interface's hardware mixer and effects from another Mac, PC or iPad, including wirelessly over Wi-Fi.

TotalMix Remote mirrors the current state of the host system on the iPad and Windows/Mac computers - the entire mixing state, the complete routing, all FX settings, up to the level meters, and everything in real time.

DC-Coupled Outputs - CV/Gate Voltage Control

Most audio interfaces are traditionally designed with what is called 'AC-coupled outputs', where capacitors are used to filter out any extreme low frequencies.

Whilst these frequencies are generally considered undesirable for audio - eating into headroom and potentially causing damage to other equipment - one instance where DC-coupling remains desirable is the world of modular synthesizers, where static or slow-moving signals are used for control over various parameters such as pitch note values or LFOs.

All of the Fireface UFX III's line-level outputs are fully DC-coupled, allowing for the sending of control voltages (CV) or Gate information to modular synthesizers (such as the popular Eurorack and Moog/MOTM/Synthesizers formats) and other studio hardware.

USB 3 Class Compliant Audio

The Fireface UFX III operates in two different modes: driver-based and Class Compliant.

Class Compliant mode is a standard that is natively supported by operating systems like Windows, Mac OSX and Linux distributions, allowing for Plug 'n' Play operation of the Fireface UFX III. No proprietary drivers are required, the device will be directly recognised when the CC firmware is loaded.

The Fireface UFX III is RME's first audio interface with full USB 3.0 support in Class Compliant Mode. This makes all channels available in driverless operation for Linux, Mac and iPadOS.

An iPad Pro with USB-C can manage up to 94 channels for recording and playback in TotalMix FX for iPad and on system level.

ARC USB Remote Control (sold separately)

The ARC USB is an optional remote control for the Fireface UFX III, along with all other RME devices that use TotalMix FX.

15 user-assignable illuminated buttons, one encoder wheel, and a TS jack (for connecting a foot switch) provide access to all of the most used functions of TotalMix FX.

The ARC USB can be connected directly to the Fireface UFX III via the second USB port on the back of the interface, or directly to a USB port on a Mac or PC.

Operating as a UAC 1 class device, the RME ARC USB is natively compatible with Windows and Mac OS X. As soon as it is present in the operating system, TotaIMix FX will automatically detect the ARC USB, and communicate with it via simple MIDI remote commands to control the UFX III.

DURec (Direct USB Recording)

DURec is an integrated digital recorder for all inputs and outputs directly to USB memory devices via the front USB port. The Fireface UFX III records on USB thumb drives or hard drives with up to 2 TB capacity.

The recording functionality is provided by the internal DSP, and is therefore independent from a connected Windows or Mac computer. The Direct USB Recording converts the Fireface UFX Series both into a stand-alone field recorder and a powerful multichannel live player for previous recordings, e. g. for virtual sound checks.

Live concerts, band rehearsals or spontaneous jam sessions can be directly recorded and played back from the medium - even completely stand-alone without computer or software.

General Specifications

Power supply: Internal switching PSU, 100 - 240 V AC, 36 Watts
Idle power consumption: 19 Watts
Typical power consumption: 22-25 Watts
Dimensions including rack ears (WxHxD): 483 x 44 x 210 mm (19" x 1.73" x 8.5")
Dimensions without rack ears (WxHxD): 440 x 44 x 210 mm (17.3" x 1.73" x 8.3")
Total depth: 240 mm (9.4")
Weight: 3 kg ( 6.6 lbs)
Temperature range: +5- up to +50- Celsius (41- F up to 122-F)
Relative humidity: < 75%, non condensing

Included Accessories:

Cable USB 3.0, 1.8 m (6 ft), USB-A/B
Cable USB 3.0, 1.8 m (6 ft), USB-C/B
Optical cable
4 rubber feet, self-adhesive
Power cable
Printed Manual

Notes: ***B-STOCK: Box opened, product in perfect working order***


OBEY is a dual-function module: one half envelope follower and one half attenuverter / offset generator.

Envelope Follower:
The OBEY takes an audio or CV signal and uses it to trigger an envelope or gate for use in a Eurorack system. It is designed to work with a wide variety of input levels: plug a Eurorack module, passive microphone, piezo, guitar, drum machine, Game Boy into your Eurorack system.

Attenuverter / Offset Generator:
Attenuvert your voltage sources up to two times in the positive or negative! The offset generator provides up to 5 volts in the positive or negative.

Specifications:
Module width: 4HP
Module depth: 48mm
Current draw:
+12V: 25mA
-12V: 18mA