Search dance music

Notes: Module A-182-1 is a simple passive multi-connector similar to the multiples modules A-180-1/A-180-2. In contrast to modules A-180-1/2 each socket is equipped with a 3-position switch that allows to connect the corresponding socket to the internal bus #1 (left position), bus #2 (right position) or to turn the socket off (centre position).

Examples:

- All switches in left position or all switches in right position: 8-fold multiple

- Four switches in left position and four switches in right position: two 4-fold multiple

- X switches in left position, Y switches in right position and Z switches in centre position: two separate multiples with some sockets turned off

Notes: Module A-184-2 is the combination of two functions and planned primarily as an expansion module for VCOs or LFOs (e.g. A-110-1, A-110-2, A-145, A-147-2).

Triangle-to-Sine Waveshaper:

The upper section is a very precise triangle-to-sine converter (thanks to Tim Stinchcombe who recommended this circuit). It can be used to convert any triangle waveform into a (nearly) perfect sine. The converter is much better than the simple diode converter used in the A-110-1, A-111-1, A-145 and A-147-2. Two trimming potentiometers are used to optimize the sine shape. The converter should be assigned to one VCO or LFO because the trimming potentiometers have to be re-adjusted if the input level or DC offset of the input signal changes. If the trimming potentiometers are deliberately mis-adjusted it can be used also as a waveshaper for non-sine waveforms (e.g. sine-shaped at the top of the signal and a peak at the bottom, even voltage controlled by applying an additional voltage to the waveshaping circuit, "circuit-bending" notes will be available).

The waveform converter is DC coupled and can be used also for low frequencies (e.g. LFO triangle waves).

Voltage Controlled Crossfader:

The lower section is a voltage controlled crossfader. It has two inputs A and B. The two signals are mixed together with variable percentage. When the manual control CF is fully CCW only signal A appears at the CF Out socket. When the manual control CF is fully CW only signal B appears at the CF Out socket. In the centre position of the manual control both signal appear with the same level. In addition a control voltage input CV with attenuator is available to enable voltage control of the crossfade.

Two LEDs display the crossfading shares of input A and B.

The crossfader uses two high quality VCAs (SSM2164). Inputs and outputs are DC coupled. Consequently it can be used for audio signals and slowly varying control voltages as well.

The sockets of the upper section (triangle and sine) are normalled to the inputs A and B of the crossfader section. That way the crossfader is used to fade between triangle and sine of the VCO or LFO connected to the waveshaper. If other signals are plugged into the input sockets A and B these signals are used for crossfading.

The main application is to fade between two different waveforms of a VCO or LFO or two different VCF outputs. But the module can be used for any other signals too as the waveshaper and crossfader sections are independent apart from the normalled sockets.

Notes: Whether you're looking to create videos that jump from viewers' feeds, podcasts that pop with character, or interviews that listeners just have to share, in today's social-driven landscape it's critical to deliver truly professional results to stand out from the crowd.

With iRig Mic Cast HD, it's never been easier to create engaging video and audio with just your smartphone or tablet. iRig Mic Cast HD is a pocket-sized microphone that easily attaches to your device and delivers big-sounding, professional-quality voice recordings anywhere.

Noise-free audio and video:

iRig Mic Cast HD lets you record crystal clear speech anywhere using your iPhone, iPad or Android device. Dual gold-sputtered electret condenser capsules deliver superior accuracy & detail, and 24-bit, 96 kHz A/D converters offer premium sound quality so you can be sure you'll always sound your best.

Sound great from every angle:

iRig Mic Cast HD's innovative design lets you select from front or rear cardioid pick-up patterns, or a bi-directional figure 8 pattern, to reject off-axis noise. Capture clear, impressive recordings whether you're in front of the camera, shooting a subject or conducting an interview.

Ready when you are:

Weighing in at just a few ounces, this lightweight mic mounts securely onto your iPad or smartphone. Its innovative magnetic design lets you easily snap it right into place on your device in seconds (even with a case), so it's ideal for field or location work. iRig Mic Cast HD works equally well in both portrait or landscape orientation on phones and tablets.

Supports your existing workflow:

iRig Mic Cast HD works with any app that records audio, so you can shoot YouTube videos, film interviews, live stream, or even use it for Skype - however you're currently working, iRig Mic Cast HD will give you a noticeable sonic upgrade without slowing you down. The built-in headphone out can be used to monitor the signal in real-time, and is ideal for newer smartphone models without a headphone jack, so you're sure to get great results even when you only get one shot.

To get you started right out of the box, iRig Mic Cast HD comes with Lightning, Micro-USB and USB-C cables. Also included is iRig Recorder 3 LE (iPhone/iPad/Android) - an easy-to-use, high quality audio and video app. Record, trim, edit and share, right from your device.

Ideal for use on the go:

No matter where your journeys lead, iRig Mic Cast HD is standing by. Its backpack portability makes it an ideal travel companion, and the adjustable gain feature and included windscreen ensure high recording quality anywhere - even in crowds or when outdoors. Best of all, there are no batteries required!

iRig Mic Cast HD delivers a stunning, professional audio solution that's always ready when you are and won't weigh you down. Get ready for audio that stands out from the crowd.

Includes:

- iRig Mic Cast HD microphone
- Lightning to micro-USB connection cable (16cm/6.3")
- USB C-Type to micro-USB connection cable (30cm/11.81")
- Micro-USB OTG-Type to micro-USB connection cable (16cm/6.3")
- Windshield
- 2x ferromagnetic plates

Notes: Your fast track to great videos and live-streams:

Whether you want to be a YouTuber, create awesome Instagram video or stream live on Facebook, you can do it all with professional quality! This new bundle gives you all the tools you need to record great-looking and great-sounding video on your smartphone.

Always get the perfect shot:

The included iKlip Grip Pro is 4 accessories in one - a desktop tripod, handgrip, full-sized tripod and monopod, so no matter how or where you're shooting, you're covered! It fits any sized smartphone and most action cameras securely, to precisely position your phone to get the best angle whether you're at home or on the go.

The convenient 1/4" UNC mount on the top makes it easy to mount accessories like a ring light, and an included Bluetooth shutter lets you start and stop recording remotely.

Crystal clear audio:

iRig Mic Lav is a lapel microphone that plugs directly into your smartphone or tablet via the headphone jack. It's perfect for use on-camera, since it captures your voice clearly but doesn't distract viewers, and a generous 60"/150 cm cable lets you shoot at the right distance.

Best of all, iRig Mic Lav works with all your favourite apps, so you can enjoy crystal clear audio on social media, videos, live-streams and more!

Set the scene:

To create the right vibe, the iRig Video Creator Bundle also includes a 6" LED ring light with adjustable colour and brightness so you always look your best. It mounts right onto the top of iKlip Grip Pro to give you a convenient all-in-one solution you can carry almost anywhere.

And no batteries are required, just connect to any USB power supply or battery pack and shoot at home or on the go!

Works with all your favourite apps:

Whether you want to create fun, daily videos for your Instagram Story, kickstart your YouTube channel, or engage your favourite Facebook group with live-streaming content, the iRig Video Creator works out of the box with any app that captures audio and video. So you can look and sound like a pro with an endless range of ways to create.

With the iRig Video Creator Bundle, you can create amazing videos more easily than ever.

Notes: A spacious backpack that accommodates a compact synthesizer, new from SEQUENZ.

Three storage compartments are included for various purposes. The main compartment can accommodate a larger portable equipment, such as a compact synthesizer, effect board, or DJ controller.

The second compartment has enough space to hold up to a 17-inch laptop computer. Inside are organizer pockets that can store a smartphone, cables, or a wallet, so you can carry all of your daily necessities.

The front pocket is a sleeve equipped with fasteners, ideal for holding books, magazines, or sheet music.

Thick padding securely protects your equipment and computer. A U-shaped shoulder belt distributes the weight of the pack, and the back and shoulder areas use mesh material for cushioning and cooling, letting you carry heavy equipment with ease.

MP-TB1 is a stylish backpack that holds everything you need effortlessly.

Notes: We have reissued the original Version 1 Big Muff and it's dripping with vintage Electro-Harmonix DNA and tone. Dubbed the Triangle Big Muff because of the layout of its Volume, Sustain and Tone controls, this is the one that started it all. The new Triangle Big Muff is a faithful re-creation of the original circa 1969 circuit now housed in a pedalboard friendly, die cast chassis.

Electro-Harmonix founder, Mike Matthews, stated: "The Big Muff Pi is the pedal we are best known for so I wanted to commemorate EHX's 50th Anniversary (1968-2018) by re-releasing V1, the very first Big Muff. Original pedals are now selling for hundreds of dollars and this reissue absolutely nails that creamy, violin-like sustain and musical tone at a price a working musician can afford.

Notes: A spacious backpack that accommodates a compact synthesizer, new from SEQUENZ.

Three storage compartments are included for various purposes. The main compartment can accommodate a larger portable equipment, such as a compact synthesizer, effect board, or DJ controller.

The second compartment has enough space to hold up to a 17-inch laptop computer. Inside are organizer pockets that can store a smartphone, cables, or a wallet, so you can carry all of your daily necessities.

The front pocket is a sleeve equipped with fasteners, ideal for holding books, magazines, or sheet music.

Thick padding securely protects your equipment and computer. A U-shaped shoulder belt distributes the weight of the pack, and the back and shoulder areas use mesh material for cushioning and cooling, letting you carry heavy equipment with ease.

MP-TB1 is a stylish backpack that holds everything you need effortlessly.

Notes: Tresor is pleased to announce the Drexciyan journey's continuation with the release of The Book Of Drexciya, Vol. 1, a graphic novel which covers the first 5 vivid chapters of this powerful mythology, a crucial Afrofuturist work.

African pregnant women thrown o the slave ships gave birth underwater to amphibious creatures. They could breathe as they did in their mothers' wombs, they had webbed hands and feet and became the Drexciyan wave jumpers: great warriors of the abyss. Revealed in the inner sleeve notes of The Quest (1997), through a map of the diasporic black culture, Drexciya illustrated four phases: The Slave Trade, Migration Route of Rural Blacks to Northern Cities, Techno Leaves Detroit, Spreads Worldwide, and The Journey Home (Future). It introduces the very creatures and warriors found in these pages, such as Wavejumpers and Deep Sea Dwellers. The return home is of destination future, where lays the population of their abyss.

Follow the story of the first Drexciyan, his subaquatic birth, growing up in the caves of Ociya Syndor, later to become Drexaha, the empire's first king. Get introduced to Dr. Blowfin, Master of Alchemy and Quantum Genetics, who masterminded Drexciyan computer systems and network, based on Genetic Intelligence and DNA matrix systems. Hear the story of the birth of the wavejumpers, the mightest warriors of Drexciya. Enter Bubble Metropolis, thriving with its central command, aquabahns and aqua wormhole gateways to the cephalopod-like oceanic Cruisers.

Authored by Abdul Qadim Haqq and Dai Sato, it features the art of Haqq, Leo Rodrigues, Alan Oldham, Hector Rubilar, Leonardo Gondim, Daniel Oliviera and Milton Estevam. Haqq's legendary concept imagery associated with the Detroit techno community and beyond for almost 30 years and his contributions to the mythology at the time of conception makes him uniquely positioned to lead this endeavour. Dai Sato is most known for his screenwriting for animes Cowboy Bebop and Ghost in the Shell.

This project comes with the full support of living Drexciya member Gerald Donald and Helen Stinson, the surviving mother of James Stinson.

Review: You may not be familiar with avant-garde composer Valentina Goncharova, but this incredible collection of rare home recordings is enough to answer any questions you might have as to how mind-blowing her work is. The sort of artist who needs to flee the Leningrad Conservatoire in order to have the space and freedom to fully explore ideas. Combining elements of musique concrete, drone, ambient and a kind of lo-fi classical, this is an expression of place - sanctuary of the home - and its ability to offer protection from creative oppressors. Using vocal mantras, curious refrains, amplified and distorted strings (cello in particular), you really get a sense of not only the where but the how behind these arrangements. Hushed but dense, they draw the listener in with surprising speed, so before you know it you're right there in that domestic studio watching a genius at work.

Notes: A Comparator is an electronic circuit that compares two voltages and switches its output to indicate which is larger. The Comparator operates between -10 or +10V

The Output is always -10V if below Threshold and +10V if above Threshold.

A Rectifier is an electronic circuit that is used to transform AC signals to an equivalent DC signal while removing one of it's polarities, i.e. Positive rectification excludes negative signals and vice-versa.
Both sections can be used to change the shape of any waveform as well as its harmonic content.

FRONTPANEL:
1 Comparator Threshold Knob
1 Comparator Jack Output
2 Comparator Monitor Led1 Common Signal Jack Input
4 Rectificated Outputs

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector

Notes: The ADDAC213B is the second pair of modules from ADDAC's Eurorack Bridge system.

A pair of ADDAC213Bs can be used in standalone to send/receive 8 CV or audio signals between different points inside the same case or as an expansion to the main pair of Eurorack Bridge modules, the ADDAC213As.

Two ADDAC213B modules can be connected to each other with the use of a single ribbon cable and then used inside a case to carry signals between distant points without the need for long cables. Less clatter, less spaghetti- more space of your fingers on those knobs!

ADDAC213Bs always come in pairs. A single pair can send & receive up to 8 CV or audio signals between different points in your case at the same time. The modules can be installed in normal position or a 180 degree position to fit any need.

As an Expansion to an ADDAC213A.

Each ADDAC213B connected to the backside of an ADDAC213A adds 8 more channels to the main bridging functionality of the ADDAC213A.

Up to 2 ADDAC213B can be connected to an ADDAC213A module, expanding the bridging between two difference cases to a total of 24 channels.

If you're looking for a simple one-cable bridge between your various cases, then look no further than the ADDAC213A.

Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

Each module can be installed in normal position or at 180 degrees.

Comes with a 50cm ribbon cable. Custom sizes are available upon request.

Mechanical:
. Format: Eurorack
. Width: 3 HP
. Depth: 2.5 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable

Notes: Following ADDAC System's T-Networks series, the importance of having the right input signal for firing drum modules or envelopes was realised. Gates and Triggers are often looked at as similar signals but at times it really makes a difference and results will change drastically depending if a Gate or a Trigger is fed to the input of such modules.

This led to the simple yet effective Gate to Trigger.
A four channel converter with bypass switch for each channel.

Any input Gate will be limited to a 1ms Trigger.

Tech Specs:
3HP
2.5 cm deep
10mA +12V
10mA -12V

Notes: Passive dual expression pedal attenuator.

Plug any CV or audio source through it and control its amplitude through any standard expression pedal.

Invert switch for inverting the expression pedal action.

Specs:
- Passive Module
- Width: 4 HP
- Depth: 3 cm

Notes: Dedicated expansion for the ADDAC807C VC Summing Mixer

Features 4 individual track post fader stereo outputs.

2Hp
2 cm deep
0mA

Notes: One of the most important artists of our era, Ryuichi Sakamoto has had a prolific career spanning over four decades, from techno-pop stardom to Oscar-winning film composer. The evolution of his music has coincided with his life journeys. Following Fukushima, Sakamoto became an iconic figure in Japan's social movement against nuclear power. As Sakamoto returns to music following cancer, his haunting awareness of life crisis leads to a resounding new masterpiece. Ryuichi Sakamoto: Coda is an intimate portrait of both the artist and the man.

Notes: Komplete Audio 1 is a simple, great-sounding audio interface with all the software you need to put ideas into action. From recording songs, to mixing down and playing out - it helps you go from a spark of inspiration, to finished results you can be proud of.

For the songwriters:
Easily record vocals, guitar, or any other instruments straight into your DAW in high quality. With Ableton Live 10 Lite, synths, and effects included, you've got everything you need to create songs.

For your story:
Whether it's a beatmaking vlog or a podcast you're creating, the interface give you everything you need. Record speech in high quality, then give it a pro touch of mastering with the included plugins.

For the performers:
Take your music to the bar, club, or anywhere else. Bag-friendly sized - it's a simple way to incorporate a laptop into your performance. Make quick, on-stage level adjustments using the big volume dial.

For the producers:
Break out of the box - bring synths, effects, and other gear into your productions. Flip samples from stereo sources. And polish your productions with studio-grade instruments and effects included.

Komplete Audio 1 - recording made simple:
Perfect for recording mono sounds like vocals and guitar at the same time. It gives you two different inputs - XLR for vocals, and jack for guitars or other line-in sounds. Plus, stereo RCA outputs let you connect directly to hi-fi speakers and play everything out loud.

Notes: The new CTRL Case S2 MK3 a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your NI Traktor Kontrol S2 MK3 controller. Made of lightweight and rigid Durashock moulded EVA shell, the inside lid is lined with high density egg-crate foam to protect the displays, jog wheels, and controls. Whether you are driving or flying to your next gig, the MAGMA CTRL Case S2 MK3 will be by your side throughout the journey.

Notes: 2ENV is a dual attack - decay envelope; it can be switched between full sustain (the output remains at full level as long as the GATE input is on) and zero sustain (for percussive envelopes). Another switch (SLOW/FAST) allows selecting the time range.

For manual triggering there is a button for each envelope.

CV control: Both attack and decay time can be CV controlled; the CV "multiplies" the time by 1...approx. 8 times.

Notes: The 2OSC/d module contains two 1V/octave hybrid oscillators. Each of them features:

- One frequency knob plus a range switch +2 octaves
- CV input (1V / octave)
- PWM input
- SYNC input
- Sawtooth/Square/Sub-octave output

The pulsewith knob controls either the pulsewidth of the first oscillator (with the second one having a fixed pulsewidth), or via a switch the second oscillator is also controlled by the pulsewidth knob. Both oscillators can be pulsewidth-modulated independently by their PWM inputs.

The module is designed as a hybrid digital/analogue module; the oscillator frequencies are determined digitally and are therefore quite stable and have a good tracking; the output wavefom itself is created analogue. It's a new idea/concept that I have implemented here; the design causes the waveform to get a bit gritty at higher frequencies (but not "digital noise") - it's the character of this thing!

Notes: The Prophet Rev-2 Keyboard is a powerful and versatile synthesizer that embodies the rich legacy of Sequential's iconic Prophet series. With its extensive sound-shaping capabilities, robust performance features, and expressive keyboard, the Prophet Rev-2 Keyboard is designed to inspire and elevate your music production and performance.

At the heart of the Prophet Rev-2 Keyboard are its dual digital oscillators per voice, offering a total of 16 voices of polyphony. These oscillators provide a wide range of waveforms, from classic analog shapes to more complex digital waveforms, giving you the flexibility to create a diverse palette of sounds. The high-resolution digital effects section adds further depth and dimension to your patches, allowing you to sculpt your sounds to perfection.

One of the standout features of the Prophet Rev-2 Keyboard is its extensive modulation capabilities. With its four LFOs, three envelopes, and extensive modulation matrix, you can shape and evolve your sounds in intricate ways. From subtle timbral variations to complex evolving textures, the Prophet Rev-2 Keyboard gives you the tools to explore new sonic territories and express your musical ideas with depth and nuance.

The Prophet Rev-2 Keyboard also features a versatile and intuitive sequencer. With its 16-step polyphonic sequencer, you can create intricate patterns and sequences that bring your compositions to life. The sequencer offers real-time recording, step editing, and parameter automation, allowing you to create dynamic and evolving musical phrases. Additionally, the arpeggiator provides further rhythmic possibilities, adding movement and excitement to your performances.

With its full-sized, semi-weighted keyboard, the Prophet Rev-2 Keyboard offers a responsive and expressive playing experience. The velocity-sensitive keys and aftertouch functionality allow for nuanced and expressive performances, giving you the ability to infuse your music with emotion and dynamics. Whether you're playing in the studio or performing on stage, the Prophet Rev-2 Keyboard's keyboard is a joy to play and offers a high level of expressiveness.

To ensure the longevity and protection of your prized Prophet Rev-2 Keyboard, the Decksaver cover is an essential accessory. Custom-molded to fit the exact dimensions of the keyboard, the cover provides reliable protection against dust, liquid spills, and accidental impacts. The durable polycarbonate construction shields your Prophet Rev-2 Keyboard from potential damage, whether it's in your studio, on stage, or during transportation.

Engineered in the UK, the Decksaver cover is designed to offer a perfect fit while accommodating cable connections. It allows you to keep your Prophet Rev-2 Keyboard ready for operation at all times, while providing peace of mind knowing that your instrument is protected from potential hazards. Whether you're a professional musician, a sound designer, or an enthusiast, the combination of the Prophet Rev-2 Keyboard and the Decksaver cover ensures that your instrument remains safe and ready to inspire for years to come.

Unleash your creativity and dive into the sonic possibilities of the Prophet Rev-2 Keyboard, knowing that your valuable synthesizer is protected by the reliable Decksaver cover. Whether you're crafting intricate soundscapes, performing expressive solos, or exploring new musical territories, the Prophet Rev-2 Keyboard and the Decksaver cover are the perfect combination for taking your music to new heights while keeping your instrument safe and sound.

KEY FEATURES
Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Keeps settings and controls in place when not in use.
Low profile design enables compatibility with most flight cases and travel bags.

DIMENSIONS
Weight: 1.61kg
Length: 90.6cm
Width: 32.6cm
Height: 3.4cm

Review: The Smashing Pumpkins' transformation from melodic alt-rock deities to synth-driven electronic boppers is complete. Well, almost. The titular single certainly fits that easy narrative, laser beam chords and string refrains bursting from behind a track that bounces with a light disco punk energy. In truth, of course, there has always been far more to Bill Corgan et al than the alternative rock tag often implies, and even right back to their formative years the crew were toying with expectations.

2018's Rick Rubin-produced Shine And Oh So Bright... album may have emphasised their rock roots, but now we're given their creative juices in full flow on their poppiest outing yet, partly inspired by the roster of seminal Chicago label Wax Trax!, the US home to Underworld and The KLF among others. Needless to say, though, the Pumpkins make it sound like they've lived here all along; testament to their unwavering dedication to trying new ideas and knack at pulling them off.

Notes: Diode Chaos is a 3hp analog chaotic low frequency voltage generator Eurorack Module available as Eurorack DIY Kit, PCB and Panel, or Built Module.

It is a unique module because it has never existed as an electronic music instrument until now. The module is based on a circuit from a paper called "A simple chaotic circuit with a light-emitting diode" written by Volos, Wang, Jafari, and Kapitaniak.

Diode Chaos produces 3 phases of interrelated morphing voltages including a chaotic trigger out. The range is 20-30 seconds a cycle up to audio rate, although only the X out and TRIG out go up to audio rate. The frequency is controlled by the RATE knob. Each output exhibits different behavior at different rate settings. X,Y, and Z outs like to stay in the 4vpp range although at different RATE settings the outs can reach 10vpp. The TRIG out chaotically releases 0-10v triggers although sometimes it will spit out smaller voltage peaks.

LED soldermask windows provide constant display of positive and negative voltage crossings.

Differences between chaos and random(some quoted and summarized material from Ian Fritz's site):

Chaos is "highly irregular, but still contained within a finite region (the "strange attractor")"

Chaos occurs in 3 dimensions.

Chaos needs a non-linear element (with Diode Chaos the nonlinear element is a red LED, and the chaos is directly visible and useable at the TRIG out).

Notes: The Triple Cap Chaos(C^3 Chaos) is a 2hp analog, chaos based, noise oscillator, pseudo ring modulator/harmonics generator, and audio mangler Eurorack module available as a DIY Eurorack kit, PCB and Panel, or built.

It is a unique module, like the Diode Chaos, because it has never existed as a musical instrument until now. There is also no other module to my knowledge that can do exactly what the Triple Cap can do. The circuit(with several modifications) is based on the paper "Simple Autonomous Chaotic Circuits" by J.C. Sprott and Jessica R. Piper. As opposed to the Diode Chaos that generates control voltage this module focuses on the audio rate.

The "Emanate" potentiometer controls the coarser overall spectrum of the chaos, from lots of activity counter clock wise up to less chaos and more of a steady oscillation. The "Width, CV ATT" potentiometer can be thought of as more of a fine control for the chaos/oscillator. When something is inserted into the "CV" in the voltage normalization from the width knob is broken and the potentiometer now acts as an attenuator for the incoming cv. The Triple Cap is not a traditional volt per octave exponential VCO, and has a sort of narrow frequency range to exploit the chaotic behavior.

It expects a +5v to -5v max signal in to modulate the chaos. The "IN" jack is an A.C. coupled input for audio in, although cv and audio can work for both the "CV" in jack and "IN." The "IN" will interfere and interact with the onboard chaotic oscillator depending on the frequency of the input, which may take some experimentation. It can create ring mod ish sounds, to added harmonics, to almost bit crushed sounds depending on the "X" or "Y" output. The "X" output is a more windy noisy sinusoidal based output and the "Y" output is more squared off and aggressive, harsher sounding output.

Some quirks about the Triple Cap: The "X" output can offset negatively or positively a little bit depending on the pot settings, but both outputs tend to stay around 10vpp. With the "Emanate" and "Width" pots all the way up the typical frequency will be around 150hz although some will reach 200hz at this setting. With the "Emanate" pot full counter clock wise "Width" pot full clock wise the frequency will be around 250hz. It is possible to send signals into the triple cap that can bring it out of the desired range causing the oscillation to cut out.

The Triple Cap has a double sided panel. meaning one side has the classic graphics and the other is Soulless with less graphics.

Notes: The Entropy Expander is a 3hp Analog Random Voltage Generator that expands upon the features of the Entropy Euroack Module. Available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

The Entropy+Expander packs together some of the most random voltage options in 6hp. It provides a controllable "Glide"(slew) out for the S/T\H, a comparator with a controllable rate("Thrsh") of random gates("Rand Gate") out with an input to compare other waveforms(Comp In, inserting a cable into here breaks the white noise normalization), and high pass filtered white noise resulting in approximate "Blue noise" (+3db/octave) and "Violet noise"(+6db/octave) outs.

The unique part of the circuit is a voltage controlled A/B switch thats normalled to the "Rand Gate" out that's switching between the S/T\H out(left Blue led window)and Infra out(right Red led window), the Glide control also effects the S/T\H coming out of the switch so you can get really random results from the "Entropy Out." Inserting a cable into "Switch CV In" breaks the random gate normalization and lets you toggle between A/B(left S/T\H out and right Infra out, indicated by the led windows) with your own gate or trigger.

There is a jumper on the pcb to select if you want glide on the s/t\h at, Entropy out, or un-slewed operation. There is also a trimmer for setting the amplitude of the incoming signal at "Comp In" which sets the frequency range of random gates. This may have to be adjusted depending on your Entropy version.

The random gate range can also be set up more as a noise oscillator by turning the pcb trim(clockwise) up or it can be set so random gates are extremely slow(trim counter clockwise) with minutes between random gates.

Notes: The Dual VCA is a 2hp 2 channel Analog VCA and Mixer Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

It is a DC coupled OTA(LM13700) Dual Linear VCA based on the same fabled design of the VnIcursal VCA. The 2 VCAs are summed together so it can be used as a voltage controlled mixer at the "SUM OUT" or all 3 outs can be used separately and simultaneously. 5 volts into the CV in will provide unity gain, anything above 5 volts can clip the input.

Notes: ZVERBZ is a collection of new stereo reverb algorithms for the Z-DSP. They range from typical reverbs to more complex effects that combine delay and pitch shifting with reverb. The effects are grouped by decades based on either the era an algorithm was introduced or the time when the effect was most popular. This variety of reverbs covers small to epic size spaces with the addition of shimmering, feedback tunneled pitch shifting, tape delay drivers, gated reverbs and a lot more. Analog clocking of the DSP chip and CV over the parameters enables even more experimentation. This is a collection inspired by the best from the past right at your fingertips.

Please note: The Z-DSP module is not included with this purchase- it is for demonstration purposes only.

Notes: Whether you're starting your first podcast, telling your YouTube subscribers about the latest trends, or running a program for your local volunteer radio station from your living room, you need a microphone that will bring your voice to your listener with clarity and warmth. The PD-70 is built to capture the spoken word cleanly and clearly while eliminating mechanical noise and breathiness that can get between you and your audience. Thanks to superior off-axis rejection, you can set up your broadcast studio in just about any space- and unwanted reverberance, electrical hum, and the random car driving by will be left behind, leaving only the pristine, natural sound of your voice.

Presonus are delighted to announce that the already fantastic value PD-70 Broadcast Microphone will, from now on, include over $1000 worth of free software upon registration.

When registered to your my.presonus account (serial number is on the base of the microphone above the XLR input), you will automatically receive a license for Studio One Prime and the Studio Magic Plugin Suite.

Technical specifications:

Acoustic Performance:

Capsule Type: Dynamic
Sensitivity: 1.6mV/Pa
Frequency Response: 20 Hz to 20 kHz
Polar Pattern: Cardioid
Output Impendance: 350O

Review: Of all the grunge era survivors, The Smashing Pumpkins are surely one of the most grandiose. Staying true to that premise, Billy Corgan revels in a majority original line-up being back together to create a whopping triple-sized concept album which picks up the thread from Mellon Collie and the Infinite Sadness and Machina/The Machines of God. Atum is billed as a rock opera served in three acts, veering from heavier sounds bordering on metal to the catchier, poppier sound heard on lead single 'Beguiled' and into more esoteric territory. This four-vinyl edition gathers together the entire magnum opus in one lavish box set - a must-have for devotees of the veteran US rockers.