100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 1 to 50 of 408 on page 1 of 9
1  2  3  4  5  6  7  8  9  »
Notes: Dunes is a condensed take on our highly popular Palisades "808-style" overdrive. All the glitz and glamour of the original Palisades has been stripped away, leaving only the bare essentials required for a rippin' mid-boosting transparent overdrive. It has all the great tone of the grown-up Palisades but with a simplified interface and a smaller footprint!

The Dunes features the same Gain, Tone and Level controls as the Palisades, along with Earth Quaker's favoured voice and bandwidth settings, as well as the Normal/Bright toggle. The selectable clipping Voices are: MOSFET for a tight crunchy sound (Palisades' Setting 3); Silicon Asymmetrical clipping for tighter light gain OD closest to the classic 808 sound (Palisades' Setting 4), and None, which goes from clean boost to gritty, pure op-amp distortion with a massive volume boost (Palisades' Setting 1). The two Bandwidth settings are Stock for the classic tone (Palisades' Setting 3) and Full Range for more low end (Palisades' Setting 5).

Controls:
1. Tone: Brighter clockwise, warmer counterclockwise

2. Voice: MF- MOSFET diode clipping, N- No diode clipping, Si- Silicon diode clipping

3. Gain: Adjusts the drive, dirtier clockwise, cleaner counterclockwise

4. Normal/Bright: Normal is a warm full tone, Bright is livelier tone with more chime

5. Volume: Sets the output level

6. Bandwidth: Left is brighter with more emphasis on the mids, right is full range for more low end

Tech Specs:

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies, are a;ways recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 16 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$255.16 SAVE 17%
 1 in stock $212.63
Click for better price!
or call +44 20 7424 1960
quote 781639
Notes: The Data Corrupter is a monophonic analog harmonizing PLL with modulation. It takes your input signal and brutally amplifies it into a crushing square wave fuzz tone that is then multiplied, divided and modulated to create a wild, yet repeatable, three-voice guitar synthesizer.

The Master Oscillator is the central nervous system at the heart of the Data Corrupter's cyberpunk hive mind. It feeds your input to the signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2) for maximum compatibility with your preferred instrument and frequency register. Once you've chosen your input octave, then the Data Corrupter will perform its calculations and spit out an analog synthesized frequency, which can be pitch-bent for portamento or vibrato sounds by the Frequency Modulator! From there, you can blend in one of eight Subharmonic intervals up to three octaves below the input and mix in a square wave fuzz tone for maximum data corruption.

The Master Oscillator (1) is the central nervous system at the heart of the Data Corrupter's cyberpunk hive mind. The three-position switch on the Master Oscillator control panel labeled Root (2) feeds your input to the signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2). Use the Master Oscillator's Root Switch to fine tune the Data Corrupter's tracking response for maximum compatibility with your preferred instrument and frequency register. Once you've chosen your input octave, the Data Corrupter will perform its calculations and spit out a synthesized frequency, the octave and/or interval of which may be selected via the Master Oscillator's eight-position rotary switch.

The Voice Mixer's Oscillator Control (3) adjusts the Master Oscillator blend.

The Frequency Modulator (4) applies pitch-bend modulation to the Master Oscillator. In Glide mode, you'll hear a smooth portamento as each note slides into the next. In Vibrato mode the pitch modulates up and down for a retro sci-fi laser effect.

The Subharmonic (5) assimilates the input signal into one of eight lower octave programs between one and three octaves below the original. For a more stable lower octave, set the Subharmonic's Root Switch to the Unison position, which divides the Square Wave input signal, and removes the Frequency Modulator from the Subharmonic signal path.

To unleash the cracked machine lurking within the mainframe, set the Subharmonic Root Switch to Oscillator and try not to look away as the sonic malware you just installed mangles your input signal into the sum and difference of both the Master Oscillator and Subharmonic with the Frequency Modulator applied to the upper and lower octaves.

If you think you're brave enough, set the Subharmonic Root Switch to Oscillator and try experimenting with different Master Oscillator and Subharmonic programs to wind up the doomsday clock and inch ever closer to the Singularity. Adjust the Voice Mixer's Subharmonic Control to set the lower octave volume.

Finally, (or is it?) the Square (6) control located top-left on the Voice Mixer blends in a fuzzed-out square-wave take of your input in its original octave.

The heart of this pedal is based around a CMOS Phase Locked Loop (PLL) IC. In a nutshell, the PLL takes your input signal and compares its phase and frequency against an oscillator, generates an output proportional to their difference then feeds it back to the oscillator. This then causes the oscillator to lock onto the input signal and generate a synthesized frequency. Pretty cool, right? This synthesized frequency is referred to as the Master Oscillator on the Data Corrupter.

This device takes its inspiration from the Electrax Synthax and the "Basic Frequency Synthesizer" by Ray Marston. Neither of these were really intended to be guitar effect pedals and a lot of work went into creating the Data Corrupter to provide excellent tracking and long sustain. We think you'll find it more expressive and accurate than pretty much any other PLL based effect pedal around.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Dimensions: 5.65 x 4.75 x 2.25 in. (144 x 121 x 57 mm) with knobs
Read more
MRP:$299.65 SAVE 21%
 1 in stock $236.62
Cat: 781691 Rel: 28 Jul 20 • View all Effects pedals
 
Tremolo pedal
Notes: The Night Wire is a feature-rich harmonic tremolo. What is harmonic tremolo? In short, the signal is split into high pass and low pass filters, then modulated with an LFO that is split 180 degrees. The Night Wire takes the traditional harmonic tremolo a few steps further by allowing the center point of both filters to be adjusted for different tones. The filter frequency has three modes: Manual, LFO and Attack. In Manual mode, the center point can be set to a fixed position with the frequency control. In LFO mode, the filters are continuously swept and the frequency control adjusts the speed. In Attack mode, the filters are dynamically swept according to pick attack and the frequency control acts as a range control, much like a standard envelope filter. The tremolo section has two modes, Manual and Attack. In Manual mode, the speed of the tremolo is governed by where the rate control is set. In Attack mode the speed is controlled by pick attack and the rate controls the sensitivity; the harder you pick, the faster the rate and vice-versa. The tremolo can be subtle and shimmery or full-on throbbing depending on where the depth control is set. With the depth set to zero, the Night Wire will act like a fixed filter, phase shifter or envelope-controlled filter depending on which mode the filter frequency is in. It also features a cut/boost volume control to get your levels just right.

Controls:
1. Depth: Adjusts the depth of the tremolo. More clockwise, less counterclockwise. When fully counterclockwise, the amplitude modulation will be removed and the Night Wire will function as a fixed filter, envelope controlled filter or phaser depending on where the Frequency toggle is set.

2. Rate Toggle: This toggle lets you select between two ways to control the speed of the tremolo. Attack lets you adjust the speed by pick attack. In this mode, the Rate knob controls the sensitivity of the dynamic tremolo. The higher the rate and harder you pick, the faster the speed will rise and vice versa. In Manual mode, the Rate control adjusts the speed like a common tremolo.

3. Rate: In Manual mode, this controls the speed of the tremolo. Faster speed clockwise and slower speed counterclockwise. In Attack mode, this controls the sensitivity of the dynamic tremolo. The higher the Rate and harder you pick, the faster the speed will rise and vice versa.

4. Level: Sets the output level, unity is around noon.

5. Frequency Toggle: This toggle lets you select one of 3 different ways to control the center frequency of the filter section. In LFO mode, the frequency is continuously swept by an LFO. In this mode, the Frequency knobs adjusts the speed of the LFO. In Manual mode, the frequency is determined by where the Frequency knob is set. In Attack mode, the center frequency is dynamically controlled by pick attack and the Frequency knob adjusts the sensitivity.

6. Frequency: Controls the center frequency of the filters in Manual mode: higher clockwise, lower counterclockwise. In LFO mode this controls the rate of the sweep: faster clockwise and slower counterclockwise. In Attack mode this controls the sensitivity of the envelope: lower Frequency gives slower rise and lower peak, higher Frequency gives faster rise and higher peak. Simple, right?

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 65 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$260.39 SAVE 19%
 1 in stock $211.55
Click for better price!
or call +44 20 7424 1960
quote 781691
Cat: 781637 Rel: 28 Jul 20 • View all Effects pedals
 
Delay & reverb pdeal
Notes: The Dispatch Master is a hi-fi digital Delay & Reverb Device that combines independent delay and reverb effects into one space-saving enclosure, so you can keep deep ambient echoes (or just a quick slapback) on speed-dial.

The best-selling EarthQuaker Devices pedal just got better with new Flexi-Switchr Technology. Want to dip into ambient delay and reverb sounds for just one note? Press and hold the footswitch for as long as you use the effect, release it when you're finished, and resume your regularly scheduled dry sound. To use the Dispatch Master as a normal effects pedal, press the switch once to activate and again to bypass.

To Use Both Effects at the Same Time, Simply Adjust all Controls to Taste:

The Mix (1) control is a wet/dry blend that adjusts the overall level of the affected signal.

Time (2) sets the delay time from 0ms to 1500ms (1.5 seconds).

Reverb (3) controls the amount of reverb. Counterclockwise is less reverb, clockwise is more reverb.

Repeats (4) controls the regeneration of the delay signal. When the Repeats control is set to maximum, you'll get infinite repeats without runaway self-oscillation, which makes it great for creating drones, dialing in the ultimate post-rock guitar sound without feedback, or just having fun.

To Use the Dispatch Master as a Delay Only:

Turn the Reverb control all the way down.

Adjust the Time, Repeats, and Mix controls to taste:

To Use the Dispatch Master as a Reverb Only:

Turn the Time and Repeats controls all the way down

Adjust the Reverb and Mix controls to taste

THIS IS IMPORTANT! In Reverb-only mode, the Repeats control has a secondary function. It can be used to adjust the decay, depth, and tonal quality of the reverb! Turn it up for more dynamics and a thicker tone.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 78 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$260.39 SAVE 18%
 1 in stock $212.63
Click for better price!
or call +44 20 7424 1960
quote 781637
Notes: The Space Spiral is a dark and dreamy modulated delay designed to take you across the highways of fantasy. While the delay may be designed around a "dawn of digital" echo processor, the sound is out of this world, man. If you are a fan of the dreary echoes produced by old oil can delays or the ethereal sound of a well-loved tape delay, the Space Spiral is totally going to tickle your tone bone.

The Space Spiral's delay time ranges from a tight 30ms to a fast and loose 600ms. Can you imagine having 600ms of delay time at your fingertips? Out of this world! With all of this adjustable delay time you create anything from a classic slapback to a rhythmic wash of cosmic proportions. You want to take it even further? Maybe to an astral plane? Crank up the repeats and let the infinite oscillation of the Space Spiral take you to the other side.

Space Spiral- It'll get you through the night.

Controls:
1. Time: Delay time goes from 30ms to 600ms; Clockwise for long and counterclockwise for short.

2. Repeats: Controls the regeneration of the delay signal. Repeats increase clockwise and gradually begin to build into self-oscillation around 3 o'clock. This oscillation will infinitely continue until the Repeats control is brought back down below the 3 o'clock threshold. These oscillations will last even when the pedal is in bypass mode.

3. Mix: Blends the delay signal in with the dry; Clockwise for more and counterclockwise for less.

4. Depth: Controls the desired amount of modulation; Clockwise for more and counterclockwise for less.

5. Shape: Morphs the wave shape from a soothing triangle shape to a choppy square shape as you turn clockwise.

6. Rate: Controls the speed of the modulation; Clockwise for fast and counterclockwise for short.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 38 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$260.39 SAVE 21%
 1 in stock $206.09
Cat: 781724 Rel: 28 Jul 20 • View all Effects pedals
 
Envelope filter pedal with sample & hold module
Notes: The Spatial Delivery is an oddball, a voltage controlled envelope filter that allows you to step outside the universe of funk while reinforcing your secret love affair with auto-wah. It has 3 modes: Up Sweep, Down Sweep and Sample and Hold.

With Range, Resonance and Filter controls you can get super emphasized filter sweeps in the Up and Down modes. The Range, in combination with pick attack, controls the sensitivity and reaction time of the envelope and thus the width of the frequency sweep. The higher the Range and harder the attack equals a faster reaction time and higher frequency sweep and vice versa. Reign in the controls a bit, add your favorite overdrive/fuzz after the Spatial Delivery and you've got a real nice resonant, cut-through-the-mix lead tone. Crank the controls back up and you're a neo-bedroom rock god. In the Sample and Hold mode the filter is controlled by random voltage and the Range controls the speed. Add a sub octave into the mix (before or after) and you've just created a deep fried space droid computer freak-out. The filter can be cross faded between high pass (counterclockwise), band pass (center) and low pass (clockwise) for a wide variety of voices. The Resonance control goes from zero to the brink of oscillation and adds more body and ring to the filter voice.

Controls:
1. Range: Adjusts the sensitivity of the envelope in Up and Down mode. In Sample and Hold mode, this controls the speed.

2. Mode Toggle: This toggles between Upward Sweep, Downward Sweep or Sample and Hold.

3. Resonance: This is the filter feedback control, it adds more body and ring to the filter voice.

4. Filter: This crossfades between high pass and low pass filters and allows you to get everything in between. High pass is fully counterclockwise, low pass is full clockwise and center is band pass. This is much more useful than a simple switch because it allows you to blend the filters for different sounds!

Suggested Placement
We recommend placing the Spatial Delivery first in your signal chain. However, due to its envelope control, experimenting with pairing and signal chain placement can take the potential of the Spatial Delivery even further.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 68 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$260.39 SAVE 18%
 1 in stock $212.91
Click for better price!
or call +44 20 7424 1960
quote 781724
Cat: 781628 Rel: 28 Jul 20 • View all Effects pedals
 
Optical vibe machine pedal
Notes: The Depths is Earth Quaker Devices' take on the classic optical vibe circuit. Now you can swab the decks with the same lush, pulsating, three-dimensional swirling sound you know and love, with some modern accouterments for all you land-lubbers out there.

The Depths is optimized for use with all kinds of instruments, pickups, and to play well with dirt, so nobody's left waiting on shore. If it's got a 1/4" output, plug it in and get deep!

Controls:
1. Intensity: This controls how subtle or intense the overall effect is. Counterclockwise from noon are the more subtle, classic sounds. Clockwise from noon are the more drastic and intense sounds.

2. Voice: Dials in the overall sound. Turn it clockwise for a fuller sound with more lows, bring it back for a thinner, more midrange focused tone.

3. Rate: Controls the speed of the effect. Counterclockwise for slow, clockwise for fast.

4. Level: Controls the volume of the effect. Unity is around 1 o'clock, everything above that is boost.

5. Throb: This controls the low end pulse. It may not be immediately evident on the bridge pickup, but switch to the neck or add some dirt and it comes alive. All the way up for more throb, dial it back for less. Works best when the Voice is set to a warmer tone.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9-18 volt DC power supply with a 2.1mm negative center barrel. Pedals will make extra noise if there is ripple or unclean power. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 21 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$260.39 SAVE 18%
 1 in stock $214.53
Click for better price!
or call +44 20 7424 1960
quote 781628
Cat: 781755 Rel: 28 Jul 20 • View all Effects pedals
 
Comrpessor pedal
Notes: Hey boss, thanks for taking a visit from The Warden! The Warden is an optical compressor with a feature set usually reserved for studio grade units. Built with high grade components and internally powered by 18v, The Warden has loads of gain and sustain on tap. With complete control over attack, release, sustain and ratio, The Warden will allow everything from a heavy squash with fast attack and release to "barely there" subtle compression. Optical compression has a reputation for having more character than a VCA or FET-based compression and The Warden is no exception.

Controls:
1. Tone: This pedal was designed to slightly color your tone, and the coloration can be dialed-in to your taste. Counterclockwise is treble cut, clockwise is treble boost. The tone is nearly flat around 11 o'clock.

2. Attack: This controls how quickly the compressor reacts and starts leveling the signal. All the way counterclockwise is a fast, nearly immediate reaction. Turning the attack clockwise slows the reaction time.

3. Release: This controls how long it takes the signal to raise back up to the level determined by the Sustain and Ratio settings. All the way counterclockwise is a fast release and the release time slows as you turn it clockwise.

4. Level: This controls the overall output and is affected by the Sustain and Ratio settings. There is no specific unity setting; adjust to taste when you find your perfect compression setting.

5. Ratio: This determines how much the gain reduction affects the signal. All the way up is full compression and the compression is reduced as you turn this counterclockwise which allows more of the boosted, less-compressed signal to come through. There are no defined ratios here.

6. Sustain: This is the heart of The Warden. It controls how hot the signal is, which changes the dynamics of the compression. The Warden is a feedback-style compressor; the hotter the signal, the more active the compression. Very little Sustain= very little compression, less active Attack and Release and a cooler signal. Max Sustain= heavy compression, longer sustain, hotter signal and more lively Attack and Release.

Tech Specs:
Switching
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 31 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$260.39 SAVE 14%
 1 in stock $223.53
Click for better price!
or call +44 20 7424 1960
quote 781755
Notes: An update on the popular modulation noisemaker pedal. Reflector V3 is a densely lush chorus coupled with three modes of modulation. This is a chorus with a bent, an ephemeral voice floating between aural dimensions.

Controls include Rate and Depth for the Chorus/Flanger/Vibrato speed, Mix for a balance between unaffected and affected signal and Modulate to add Pitch selection, Reverb wash amount or Flanger depth, depending on the mode. A three-way toggle switch allows the player to choose between Wrinkle Mode (A Vibrato-esque warble chorus with the added option of pitch selection, meaning the Modulate knob goes from one octave down to one octave up, with noon being close to pitch unity), Washed Mode (a simple lush chorus, Modulate control adds in a wash of Reverb pre Chorus effect) or Mirrors Mode (Detuned Chorus meets Flanger in which the Modulate knob controls the depth of the Flanger, while Rate corresponds to both the Flanger speed and the detuned Chorus speed).

The Reflector V3 features an expression out jack and clickless switching. The output level can be tweaked via an internal trimpot for boost, slight drop, or unity gain.

9VDC - 2.1mm negative center pin adapter.
60 mA draw.
Read more
MRP:$247.31 SAVE 16%
 1 in stock $207.17
Click for better price!
or call +44 20 7424 1960
quote 782160
Cat: 718636 Rel: 01 May 19 • View all Synthesisers
 
Experimental 25-key paraphonic analogue/digital hybrid synth
Notes: A synthesizer like no other, MicroFreak is a peculiar, exceptional instrument that rewards the curious musician. It blends wavetable and digital oscillators with analogue filters. It features a unique poly-aftertouch flat keyboard. It adds controlled randomness to sequences. This isn't a revolution, it's a mutiny.

This out-there little music machine features a versatile digital oscillator so you can create rare and interesting sounds with ease. Modes like Texturer, KarplusStrong, Harmonic OSC, and Superwave give adventurous musicians the chance to explore totally new, unheard possibilities. Like having dozens of synths in just one instrument, both wild-eyed newcomers and seasoned professionals will fall in love with MicroFreak's flexible, powerful synth engine.

Physical modelling, wavetable synthesis, virtual analogue, there is nothing as complete and exciting as the MicroFreak oscillator on the market. It's hard to believe from such a small synth, but here it is, ready for you to explore. Excite your creativity and reward your curiosity with a large, diverse sound palette. MicroFreak features 11 awesome oscillators, 4 bespoke Arturia engines, and 7 modes from our friends at Mutable Instruments.

Inspired by the trailblazing 12-dB Oberheim SEM filter, you can make MicroFreak's filter scream or whisper to taste. The filter is state-variable, and can even auto-oscillate! You can use this is any way you like, from taking the edge of the razor-sharp wavetable sounds, or automating the cut-off by modulating it with keyboard pressure or the in-built sequencer.

Record up to four automations, edit notes per step or use the innovative Spice and Dice sequencer functions to find happy accidents. Add randomization to create evolving, original patterns, and virtually rewire and reconfigure its signal chain and controls with the 5x7 modulation matrix.
Read more
MRP:$365.07 SAVE 31%
 More than 10 in stock $251.27
Cat: 782248 Rel: 31 Jul 20 • View all Effects pedals
 
Distortion pedal
Notes: This dark legend has been told for thousands of years. An old creature, full of grief and malice, it will bring destruction and terror over tracts of the land. Feel the fear and the destructive energy of that ancient monster, with the WURM.

KMA Audio Machines brings you the legendary distortion sound from the out of production Boss HM2 MIJ pedal. Its sound was a key element of the Swedish chainsaw metal, invented by Bands like Dismember and Entombed.

Taking the essential ingredients of this classic, while in the process developing a way more flexible metal-distortion pedal, KMA kept the classic active EQ section and added two more bands, giving a much wider range of tones to tailor your evil and gritty distortion sound. Each band has an internal trim-pot to change the centre frequency and fine-tune your tone.

To switch between the original HM2 high control and the KMA Audio Machines designed EQ bands, KMA added internal DIP switches for even more tonal variations.

Activating Switch 1 alone selects the WURM high-mids mode. To get the classic HM2 'chainsaw' high-mids character however, put switch 1 in the off position and switch 2 to on, crank the LOWS and the HIGH MIDS and rip that Swedish forest to shreds.

Activating both switch 1 and 2 together though gives you three bands, which are controllable via the HIGH MIDS control. TERROR dials in the malice and the evil distortion sound you are searching for! Crank it up and you will feel the rage of the ancient WURM.
Read more
MRP:$255.16 SAVE 18%
 1 in stock $210.17
Click for better price!
or call +44 20 7424 1960
quote 782248
Cat: 782246 Rel: 31 Jul 20 • View all Effects pedals
 
Signal splitter pedal
Notes: Can you hear the sounds coming from the woods? The steely strikes of an axe are echoing clearly through the forest, alongside the separated heavy thuds of chopped trees falling. It's Tyler - a man, rough and towering, wielding his steely axe with only one aim: Splitting up your sound!

KMA Audio Machines bring you Tyler - The Frequency Splitter. The ultimate tool for developing new sounds and pushing your creativity to new unprecedented heights.

Tyler is an active and variable two channel crossover/signal splitter, which divides your signal with HIGH PASS and LOW PASS paths. Both filters have a 12db/Oct. roll-off with a variable cut-off frequency from 20Hz to 3kHz.

Each channel has its own foot-switchable buffered FX-Loop to process your lows (WOOD) or your highs (STEEL) with independent effects loops in parallel. The MIX knob controls the ratio of the Low Pass and High Pass signals. The range goes from 100% LP over to a 50/50 ratio until 100% HP when set fully clockwise. The mix control has a flat response, with equally chosen cut-off frequencies for the LP and HP to avoid notches or bumps. If required, the LEVEL control can boost your mixed signal up to 14dB.

To avoid any phase-cancellation issues when external pedals are inserted, KMA also added a phase inverter and internal trim pots to better control the impedance for not only the main input, but also for each effects-loop. This is pretty handy when you want to insert your favourite fuzz pedal and get the tone just right.

Some examples of use: Bass players want to retain their low end while using their favourite fuzz or dirt pedal. Insert your dirt box in the highpass FX-Loop and adjust the cut-off frequency of the High and Low Pass to your needs. Dial in your preferred ratio of those Low and High Pass signals, engage the STEEL footswitch and you will never turn off TYLER again! You can also insert different modulation pedals, for example insert a lush phaser for the lows and a nice shimmering delay for the highs and TYLER will make it sound like two different guitars are playing at once. Mix up your modulation pedals with any dirt pedals, for a very pronounced and punchy sound all coming from one amp.

As you can see, TYLER is like a Swiss army knife for your tone, being both a sonic tool and a supreme source of creativity - so take your axe and let the magic happen.

Read more
MRP:$260.39 SAVE 14%
 1 in stock $223.48
Click for better price!
or call +44 20 7424 1960
quote 782246
Cat: 782134 Rel: 31 Jul 20 • View all Effects pedals
 
Flanger pedal
Notes: The Flat Light is a flanger aiming to be something else. It explores choral pitch shifted flanging, from octave down to a shimmering octave up and all the odd nooks and double-tones in between. Cascading lines form a lush modulation that becomes metallic and resonant as you push it. Reverb-like delays turn a stereotypical jet plane flange into more of an exploratory space mission. Push the controls and sense the terrain, yet trust your intuition maybe not with your life, but with your sound.
Read more
MRP:$247.31 SAVE 16%
 1 in stock $207.99
Click for better price!
or call +44 20 7424 1960
quote 782134
FORTHCOMING
ACL Mini MIDI USB MIDI To CV Converter Module
Cat: 776679 • View all Synth modules
 
MIDI to CV converter module
Notes: The ACL MINI MIDI is a USB MIDI to CV convertor module in a small module.

It uses MIDI CLOCK, START/STOP, one selectable MIDI Controller and a monophonic MIDI Note to be converted to Eurorack compatible CV, GATE and clock signals.

It can be used as USB MIDI to CV interface by connecting to your computer via the USB B port. A Class Compliant USB MIDI device can be connected to the USB A port.
Read more
MRP:$351.99 SAVE 17%
coming soon $293.31
Cat: 677527 Rel: 29 Jun 18 • View all Synthesisers
 
Paraphonic analogue, semi-modular synthesiser with dual 3340 VCO's, multi-mode VCF, 2 ADSR's, BBD delay & overdrive circuit
Notes: An ultra-affordable leap into the warm world of analogue synthesis, the BEHRINGER Neutron gives you the power to create virtually any monophonic sound imaginable with incredible power and ease.

The pure analogue signal path is based on the legendary V3340 VCO chip with 5 variable oscillator shapes. Blend or switch the 2 oscillators and 5 LFO shapes for unique sound creation. For protection and convenience, the Neutron can even be mounted in a standard Eurorack, making it ideal for the studio and/or the road. Owning a Neutron gives you all the power of a monster modular synthesis system in a flexible package with the ability to create bewildering, complex sounds.
Read more
 More than 10 in stock $275.87
Cat: 648928 Rel: 25 May 17 • View all Synth modules
 
Compact programmable clocked modulation source in Eurorack format - 8HP
Notes: Updated version of the Pamela's Workout clock source module from one of the best Eurorack brands around. Now functions as a modulation source as well as clock, providing eight outputs of CV. Essential.

Supplier's notes:
'Pamela's NEW Workout' is a compact programmable clocked modulation source for your Eurorack modular synthesiser system. It provides 8 highly editable outputs producing various control voltage signals correlated and synced to a BPM based master clock.

Building on the original 'Pamela's Workout', this new evolved model maintains the original's form factor and intuitive workflow but greatly improves on and adds many new features with upgraded hardware, a new OLED display and rewritten software.

Each output is now able to provide not just clocked triggers but also rhythmic waveforms with many parameters controllable directly and via assigning to external CV control. Pamela has grown beyond a clever clock and now provides almost limitless synced modulation possibilities.

Improvements have been made to overall clock stability and integration with external clocks and devices. Also new are dedicated MIDI and Din Sync clock outputs available via optional expander modules.
Read more
 More than 10 in stock $248.62
Click for better price!
or call +44 20 7424 1960
quote 648928
Cat: 697102 Rel: 06 Aug 18 • View all Drum machines
 
Drum machine featuring bold, hard-hitting pure analogue sounds
Notes: The little brother to the original DrumBrute arguably packs a bigger punch. Gritty analogue sounds are on offer, but the sequencer is just as inspiring. A great alternative to the usual Roland suspects.

Supplier notes:
This is the drum machine you've been waiting for.

Combining bold, hard-hitting analogue sounds, a monstrous output distortion, performable controls, superb connectivity, and a powerful sequencer, DrumBrute Impact will fill your music with energy and muscle.

Putting the focus on "Brute", DrumBrute Impact features 10 high-energy, refined, punchy analogue sounds.

You can also use the exclusive "Colour" sound-shapers to introduce unique, per instrument effect for some variation. Boost the harmonic content, add some drive, snap, or crack at the touch of a button, you can even automate tonal changes by creating a "Colour" sequence. If you want your drums to push even harder, use the built-in distortion on the output for some drum-optimized crunch.

DrumBrute Impact is a drum machine for musicians and producers who crave raw power and monstrous tone.

Awesome drums made easy:

Sharing the same prize-fighting sequencing architecture found in the original DrumBrute, you'll love the simple, fun, and intuitive sequencer in DrumBrute Impact.

Whether you want to create complex, phasing polyrhythms or straight, pounding rhythms; record a finger-drumming performance; punch in a step-sequenced masterpiece; DrumBrute Impact beats to your rhythm. Use the touch strip to create some real-time glitchy, beat-repeat breakdowns, spice up a single instrument or your whole pattern with a dedicated 'Random' knob, and add some syncopation and groove with the 'Swing' feature.

A true analogue experience:

Connect to your other gear, sync up, and make some music the old-school way.

Get away from computer screens, say goodbye to sub-menus, and jump into the world of tactile, instant, analogue satisfaction. Featuring a huge array of sync and connectivity options, you'll be able to hook up and jam with practically any other synth, sequencer, or MIDI-enabled instrument. Mix on the fly with dedicated controls for every function, multitrack, record, effect, and mix the sound your way with multiple bus outputs. Save patterns that you love, chain them together, and create full songs and live sets, all without looking at a single screen.

DrumBrute Impact is a massive sounding, creativity fuelling beast, with effortless workflow and amazing performance controls.
Read more
MRP:$365.07 SAVE 26%
 5 in stock $269.33
Cat: 681306 Rel: 24 Jul 18 • View all Synth modules
 
Multi-algorithm macro oscillator - 12HP
Notes: Rightly considered a Eurorack classic, Plaits is the successor to the much-loved Braids oscillator. Huge range of modes offering everything from speech synthesis to analogue drums. Superb.

Supplier's notes:
Plaits is the spiritual successor of Mutable Instruments' best-selling voltage-controlled sound source, Braids. Not just an MKII version: its hardware and software have been redesigned from scratch.

Just like its predecessor, it offers direct access to a large palette of easily tweakable raw sonic material, covering the whole gamut of synthesis techniques.

Simplicity first:

Gone are the screen, menu system, hidden settings, and the long list of somewhat redundant synthesis models.

Thanks to additional CV inputs, and to the use of three timbre-shaping parameters per model, Plaits is straightforward to use, and much closer to the ideal of one synthesis technique = one model. What were fragmented islands of sound in Braids are now part of a continuum of sounds.

Ready for percussion:

Patch a trigger generator or sequencer into Plaits' trigger input and instantly use the module as a percussive source thanks to its built-in virtual low-pass gate (LPG).

An internal D (decay) envelope generator is normalled to all unpatched CV inputs. Just turn the corresponding attenuverter to add pitch, timbre or morphing modulation. And if plucks and snappy hits are not your thing, patch your own envelope or CV source into the LPG CV input.
Read more
 More than 10 in stock $211.55
Click for better price!
or call +44 20 7424 1960
quote 681306
Cat: 772857 Rel: 18 Jun 20 • View all Synthesisers
 
analogue synthesiser
Notes: The Octave Cat isn't the best known synth that Behringer have turned their attention to, but it's well worth a look. Similar in approach to the Odyssey but with an even broader sonic range, going from warm and fat to tough and edgy.

Supllier notes:
Great care has been taken in engineering the CAT, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs that come together to recreate classic tones that are evocative of classic electronic music. This highly-focused attention to detail is what gives the CAT its ultra-flexible sound shaping capability. It gives you the ability to cover a lot of amazing tones from super-fat bass, tasty leads - and all the way to full on dreamy ambience from the far reaches of your imagination.

The synthesizer tracks laid down in the 1970s and 80s in progressive rock, wave and synth-pop have become classics and have inspired many other artists.

The CAT has the ability to accept any keyboard controller via MIDI. The signals generated can be tweaked via the Pitch Bend slider which can bend a note up or down one octave. Bump this up to two octaves by flipping the Octave Shift switch up or down. Use the Glide slider to change how fast a note transitions to another; up is faster, down is slower. Combine that with the LFO Freq slider to control the LFO and ADSR repeat tempo and you can create some amazing pulsating portamentos.

The very heart of the CAT's sound is its two VCOs. The Duophonic/Paraphonic nature of the CAT allows both oscillators to be controlled independently. Use the Fine and Coarse Frequency controls to tune VCO1 to VCO2. Keyboard control on the CAT can be set to either Mono or Poly. Poly mode lets VCO1 generate the highest note played on the keyboard while VCO2 handles the lowest allowing two notes to be played simultaneously. Setting the switch to Mono mode makes VCO1 generate the lowest note depressed on the keyboard.

Waveform switches on both VCOs allow different waveforms to be patched in from the LFO. Choose between Sine, Square, Sample and Hold and even pitch modulation through each VCO. Turning the Modulation Depth knobs in either direction controls the intensity of the effect. VCO2 also comes with a Sync switch that locks VCO1 with it and has them act as one huge oscillator to produce more complex waveforms and dramatic results. Mix VCO1 into VCO2 or vice versa and the CAT can produce some really tasty tones that make themselves at home in your next synth jam.

Each VCO on the CAT comes equipped with their own waveform sliders where you can adjust the volume of each type of VCO wave form. Pump up the Sub Octave, Sawtooth, Square, Triangle or Pulse waves or mix them all together and create some truly unique tones.

The CAT comes with another set of claws in the form of a VCF filter section. Here you can get more complex and robust tones by incorporating VCO1 into the mix. Introduce more waveforms and manipulate the Q slider to emphasize harmonics and Filter Cutoff slider which acts as a low-pass filter. Turn the CAT into a really funky bass machine or an out-of-this-world synth that creates some searing lead tones. You can even create some amazing drum sounds by manipulating the VCOs, VCF and ADSR.

The CAT features a whole slew of Inputs and Outputs that expand its capabilities beyond what you can see out of the box. You can route external control voltages to VCO1 or 2, the VCF and even pump in some external line-level audio into the CAT. You can even connect the CAT to other external synthesizers through the Gate, ADSR, AR or Keyboard Outputs. The CAT's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - and it provides vastly improved reliability and stability over its 1970s and '80s predecessors.

To give the signal even more character, you can use the CAT's Transient Generator to create a detailed voltage transient every time a key is depressed. Adjust the Attack, Decay, Sustain and Release via the matching sliders and to shape your signal. The AR transient generator works similarly to the ADSR but with less detailed control over the envelope. You can also set the ADSR to automatically repeat or only when a key is held down. The Sample and Hold switch can be set so the VCO1 setting is sampled or, when set to Noise mode, produce a random output pattern. Slide the LFO Delay control up or down to determine when the LFO will reach its maximum output after a key is depressed.

The CAT has 47 controls, all laid out in a highly-intuitive format that puts the joy back into your music creation.
Read more
 More than 10 in stock $292.23
Cat: 648210 Rel: 08 May 17 • View all MIDI controllers
 
Sequencer/controller with 16 velocity & pressure sensitive pads - black edition
Notes: The world's favourite small-format, versatile step sequencer just got a makeover. Control analog gear, virtual instruments, and more with the black limited edition BeatStep.

The perfect combination of space-saving, flexible control and an easy-to-master sequencer, BeatStep Black Edition gives both musicians and producers access to their DAW and exciting news ways of creating sequenced beats and melodies.

The perfect precision weapon when it comes to finger drumming and sample triggering, BeatStep lets you unite your hardware and software instruments with its built-in step-sequencer. A streamlined, yet versatile hybrid controller, BeatStep Black Edition features a rack of pads for programming and performance, transport buttons for playback control in your DAW, and rotary knobs to tweak your sequence. Thanks to its great connections, you can get your outboard synths and drum machines playing perfectly with your DAW, all while being sequenced or synchronized by the BeatStep.

Small enough to work in any setup, but powerful enough to bring a new dimension to your sound. Let BeatStep Black Edition unleash the potential of your setup.

Deceptively versatile, the new limited edition black version of our iconic small controller is the perfect companion for producers on the move or musicians with limited space.

BeatStep Black Edition's pads are both velocity and pressure sensitive, letting you punch in dynamic rhythms in your DAW. Once you're happy with your performance, you can tweak the sounds and parameters of your software instruments with its control mode, letting you freely assign the knobs, buttons and pads within your DAW. In sequencer mode, you can create 16-step monophonic sequences using the pads to punch in notes and the knobs to edit the pitch. To streamline your workflow, BeatStep also lets you choose from a selection of scales and sequence modes.

Analog Lab Lite:

Imagine conveniently having all the keyboard and synth sounds you need for a gig or session all in one place on your computer. No racks. No stacks.

Analog Lab Lite gives you streamlined, tag-based access to hundreds of the hottest presets from our award-winning V Collection. You'll be spoilt for choice with 17 faithfully modelled legendary analog synths, digital workstations, organs, string machines and pianos. Each preset automatically maps the most important sound parameters to Arturia controllers for intuitive tweaking and performance control, and you can easily custom map to any other controller via the MIDI Learn feature.

Ableton Live Lite:

An introduction to one of the most the most intuitive, popular production platforms around.

New users and seasoned pros alike love working with Ableton Live Lite. Featuring an innovative twin workflow, time stretching and pitch shifting functions, as well as numerous studio quality effects, you'll be releasing professional quality tracks in no time.

Step Sequencer:

In SEQ mode the pads become toggles for each step in your sequence. The 16 encoders will adjust pitch for the associated step. 16 memories allow for instant recall of your favourite patterns while the pad scale modes, sequence playback modes and time division functions allow for real-time performance changes.

On top of all that it has MIDI, USB and CV/GATE connectivity, giving you a sequencer that will work with all types of gear, including analog synths, software instruments, and MIDI hardware.

Percussion Controller:

With 16 velocity- and pressure-sensitive pads, BeatStep is the perfect compact percussion instrument. The ultra-sensitive pads allow for great dynamic performances. The 16 encoders can be assigned to adjust various parameters for further real-time control over your drum sounds.

General purpose control surface:

The BeatStep pads can be configured to send MIDI note on/off messages, MMC commands, Program and Bank changes, or serve as MIDI CC buttons.

With 16 encoders, 16 pads/buttons and 16 presets, there are as many ways to use BeatStep as there are live gigs and studio environments. You can trigger clips in Ableton Live or use the encoders to adjust the effects in your favourite DJ app. The transport buttons can be MMC controls or send MIDI CCs to start and stop your DAW. It can be the MIDI Clock master or slave to an external clock.

Using an iPad and a camera connection kit, you can turn BeatStep into one of the most flexible iPad app controllers ever.
Read more
MRP:$320.58 SAVE 33%
 4 in stock $213.27
Cat: 621354 Rel: 28 Nov 16 • View all Synth modules
 
Quadruple Low Frequency Oscillator (LFO) synth module in Eurorack format - 10HP wide
Notes: Batumi is a fully voltage controlled, quadruple digital LFO module with a slew of interesting and user-customizable features. Each oscillator can be used independently or in one of 3 synchronized modes: quadrature, phase and divide. For each oscillator, there are sine, square and assignable (saw, ramp, triangle and trapezoid) waveform otputs available. Voltage control is possible for each oscillator's frequency, reset, and external sync ("tap tempo"). The total frequency range spans from 28 hours in voltage controlled divide mode, up to 500 Hz.
Read more
 More than 10 in stock $259.51
Cat: 762330 Rel: 03 Mar 20 • View all MIDI keyboards
 
MIDI controller keyboard
Notes: Arturia's 88-key controller is designed for those who place the emphasis on keyboard quality and feel. Piano-style hammer action makes it a nice choice for serious players.

Supplier notes:
Creating music in the digital world can be difficult. So many options, so many new things to learn. KeyLab Essential lets you focus on what's important.

8 pads, 9 rotaries, 9 faders, and an expressive keyboard, but so, so much more. Music is at the heart of this controller. Every aspect of KeyLab Essential has been carefully chosen to give you the best possible experience when creating and performing. KeyLab Essential makes navigating inside your recording software a breeze thanks to the dedicated DAW Command Center, and makes browsing your presets an exciting and inspiring experience.

Spend less time with a keyboard and mouse, and more time creating, performing, and playing.

The KeyLab 88 is a professional-grade 88-note MIDI keyboard controller designed with the working musician in mind. Featuring a new hammer-action keybed from Fatar and deep integration with our award winning Analog Lab software, the KeyLab 88 is unique with its robust, solid metal construction and classic wooden side panels.

An extensive array of controls, a stylish yet amazingly lightweight design, and brilliant integration with laptops and tablets: KeyLab 88 is perfect for modern keyboard players, pianists, demanding stage performers, and professional producers who will not compromise on quality. KeyLab 88 sets a new standard in professional controller keyboards.

As a professional hybrid synthesizer, KeyLab 88 offers the immediacy of a hardware synthesizer combined with the flexibility of a software-based solution.

Thanks to the top quality, hammer-action Fatar keybed, the KeyLab 88 is the ideal companion for demanding performers.



Read more
MRP:$417.41 SAVE 29%
 3 in stock $297.67
Cat: 688736 Rel: 19 Jun 20 • View all Synthesisers
 
Analog semi-modular synthesiser based on Korg's legendary MS20
Notes: Channelling the Korg MS20, Behringer serve up a desktop module with attitude. Semi-modular design plays nicely with Eurorack gear to add a dose of the aggro MS sound to your rig.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, the K-2 lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, dual authentic VCOs with 4 selectable waveforms each, plus extremely flexible VCF and VCA filters, the K-2 is sure to become your favorite keyboard. Owning the K-2 is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Your K-2 comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The semi-modular architecture lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music synthesizer tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right!

The very heart of K-2's sound is its versatile 6 dB High/12 dB Low filter, which lets you freely experiment with the High and Low-Pass Cutoff Frequencies and their respective peak (resonance) settings to dial in the perfect sound. The high-pass filter sets the level of signals below the cutoff frequency, effectively reducing the fundamental and lower-order harmonics levels. The low-pass filter controls the level of signals above the cutoff, which reduces higher-order harmonic content. K-2's VCF Peak controls provide emphasis to the signals at the crossover frequency.

K-2's authentic Voltage Controlled Oscillators (VCOs) provides an incredible range of 4 variable oscillator shapes with variable pulse widths and ring modulation for the ultimate in sound creation. VCO 1 waveform choices include triangle, reverse-sawtooth, noise and pulse, where the pulse width can be adjusted from square wave to narrow across a 4-octave range (32', 16', 8', or 4'). VCO 2's waveform can be selected from reverse-sawtooth, square, narrow pulse and ring, where both oscillators are operating. VCO 2's pitch can also be varied independently across a 4-octave range (16', 8', 4' and 2'). The VCO Mixer allows you to adjust the levels of VCO 1 and VCO 2 to create an overall mix and a wide range of amazing effects.

K-2's Low Frequency Oscillator (LFO), the Modulation Generator, features a selectable Waveform (reverse sawtooth, triangle, sawtooth) with a sweepable frequency range from 0.1 to 22 Hz - and 2 separate Envelope generators to help you craft incredible sounds! Envelope Generator 1 affects the frequency modulation via controls for Delay, Attack and Release Time, while generator 2 adjusts the cutoff frequency modulation, as well as amplitude modulation of the Voltage Control Amplifier (VCA). Dials for this generator include Hold, Decay, Attack, Sustain, and Release for unparalleled envelope-shaping control.

While it is a monophonic instrument (one note at a time), K-2's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

Designed to handle the rigors of life on the road or in the studio, your K-2 can easily be transferred into a standard Eurorack case for the perfect integration into your existing system.

For those who want the numbers, K-2 has 36 controls, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand K-2's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices at virtually any point in the signal path!
Read more
 7 in stock $286.77
Cat: 689804 Rel: 03 Sep 18 • View all Synth modules
 
Innovative quad envelope - 10HP
Notes: Zadar is a powerful, four-channel envelope, modulation, and transient generator, in a compact yet very complete, feature-rich package. It is capable of synthesising a vast palette of envelope shapes starting from hundreds of shapes stored in the memory. These starting shapes are not mere wavetables, but flexible vectors that can be stretched (from a fraction of a millisecond to half an hour), flipped, warped, distorted, delayed, shuffled, repeated, and amplitude modulated in real time. A set of freely assignable CV inputs allows for external control of most parameters. Each channel can work independently or combined with other channels within one of the chaining and looping algorithms.

Operating Zadar is quick and immediate, thanks to its accessible interface and crisp OLED display. The main screen displays all parameters together with the currently selected shape. Entering the simple 3-page menu is needed only for advanced settings.
Read more
 7 in stock $292.23
Cat: 757112 Rel: 06 Jan 20 • View all Synth modules
 
Analogue 'OTA style' cascaded 4-pole lowpass VCF with self-oscillation capability
Notes: Belgian analogue innovators Joranalogue serve up an ultra-versatile filter module. Multimode flexibility meets self-oscillation for added sonic versatility. A hell of a lot of filter for the money.

Supplier's notes:
Representing the cutting edge in modular analogue voltage controlled filter (VCF) design, Filter 8 offers more possibilities and higher fidelity in 12 HP than ever before.

Starting from the classic OTA-style 4-pole cascaded lowpass (LP) topology, Filter 8 features separate LP outputs, each with their own character. Additional filter responses are achieved by pole mixing: 1-pole highpass, a special band boost and notch response, phase shifter and 4-pole bandpass. All outputs are available simultaneously.

Key to Filter 8's performance is the innovative resonant feedback circuit. By increasing the resonance, all outputs will resonate at the filter frequency, without any low frequency response loss. At higher resonance levels, self-oscillation is achieved, turning the module into an excellent 8-phase sine wave voltage controlled oscillator (VCO) with temperature and switchable gain compensation, low distortion, constant amplitude and accurate frequency tracking over at least 5 octaves. At sub-audio frequencies, Filter 8 can function as an 8-output voltage controlled slew modifier or 8-phase low frequency oscillator (LFO).

Simultaneous exponential and linear frequency modulation is possible, for classic FM tones or chaotic modulation. A hold feature is also provided, 'freezing' the output voltages manually or under gate control. This is useful for halting modulations, or as a sync-like effect at audio frequencies. The dedicated 'ping' input allows you to easily create crisp percussive sounds with different timbres.

While rooted in the legacy of classic synthesisers, Filter 8 provides a new approach to musical signal generators and modifiers: instead of simply a VCF, VCO, slew modifier or VCLFO, a single analogue module can now be any of those, and anything in between.
Read more
 6 in stock $259.51
Click for better price!
or call +44 20 7424 1960
quote 757112
Cat: 688721 Rel: 17 May 19 • View all Synthesisers
 
Analog synthesiser based on Roland's SH-101, with 32 full-size keys, 3340 VCO with 4 simultaneous waveforms, VCF, Novamod FM sources, 32-step sequencer, arpeggiator & live performance kit
Notes: The 1980s and '90s spawned a new "wave" of synth performers including Devo, The Chemical Brothers, The Prodigy, The Crystal Method and a host of others, all empowered by the sound of a simple strap-on instrument that let keyboardists steal the spotlight away from their guitar-wielding bandmates. An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, such as a 32-step sequencer, arpeggiator and live performance kit, the MS-101-BU lets you conjure up virtually any sound with incredible finesse and ease. With its 32 semi-weighted full-size keys, pure analogue signal path, authentic 3340 VCO with 4 simultaneously-mixable waveforms, plus extremely flexible VCF and VCA filters, the MS-101-BU is sure to become your favourite keyboard.

True to the Original:

Great care has been taken in engineering the MS-101-BU, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the MS-101-BU its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

Big, Fat Tones:

The inspired synthesizer tracks laid down in the 1980s and '90s are etched in the annals of progressive rock, wave, EDM and synth-pop music forever, making them truly classic in every sense of the word. The MS-101-BU lets you recreate all of that magic - or design incredibly fat and original sounds that will make you a legend in your own right!

Versatile Oscillator:

MS-101-BU's authentic 3340 Voltage Controlled Oscillator (VCO) provides an incredible range of 4 simultaneously-mixable waveforms for sculpting the perfect sound. Options include: saw, triangle, square/pwm and octave-divided square sub-oscillator. Additionally, the VCO can be adjusted across a wide, 4-octave range (16', 8', 4', and 2'). This amazing flexibility gives you the tools needed to be your creative best.

Versatile VCF:

The very heart of MS-101-BU's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: cutoff Frequency (10 Hz to 20 kHz); Resonance (0 to self-oscillation); Envelope and Modulation depth, and Keyboard follow (0 to 100%) to dial in the perfect sound. MS-101-BU's VCF can be modulated via the ADSR, keyboard tracking and Bender controller. The Frequency Modulation (FM) Amount knob sets the depth, while the FM Source selector lets you further modify the signal by choosing from: pulse; sawtooth; sub oscillator 1 octave down; 2 octaves down; narrow 2 octaves down, and Noise.

The Envelope, Please:

MS-101-BU's Envelope generator features 4 ADSR (Attack, Decay, Sustain and Release) faders that help you craft incredible sounds, and utilizes a 3-position switch for Gate, Gate + Trigger and LFO. When applied to the Voltage Control Amplifier (VCA), the ADSR envelope is used to control the level of the note being played over time. When applied to the VCF, the ADSR envelope is used to control the cut-off frequency of the filter for each note played over time. In addition, the ADSR envelope can also be used to affect the VCO pulse width modulation.

Onboard Sequencer & Arpeggiator:

MS-101-BU's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the MS-101-BU are fun, mesmerizing and totally addictive...

Own the Stage:

When you're ready to strut your stuff and get a little centre stage time, the MS-101-BU has that covered too! Just attach the included guitar strap and handgrip (with pitch bend wheel and a pitch modulation trigger), and take your performance to the next level. Why should singers and guitar players get all the limelight - carve out a little of your own!

Modulate Me to the Max!

In addition to the great sound-sculpting features already mentioned, the MS-101-BU has still more to offer. The noise generator can also be used as modulation source to create distortion-like effects, which will send your solo soaring into the stratosphere. Glide (portamento) lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate. MS-101-BU's Bender is also assignable to the VCO, VCF and pitch mod wheel on attachable handgrip.
Read more
 8 in stock $280.23
Cat: 686269 Rel: 27 Apr 18 • View all Synth modules
 
Universal, patch-programmable modulation source - 14HP
Notes: Mutable's segment generator is a one-size-fits-all approach to LFOs, envelopes and modulation. A surprisingly creative module with potential way beyond the basics.

Supplier's notes:
ASR envelope, complex 6-stage envelope, LFO, 4-step sequence or switched LFO: Stages can be any kind of modulation.

Not because all these behaviours have been pre-programmed in the module, but because it allows you to describe your own modulations in terms of basic operations: ramp from one voltage to another, hold a voltage at a set level, wait for a trigger and slew. With or without looping.

Whether you need one complex envelope, or several simpler modulations, Stages reconfigures itself according to which of its gate inputs are patched. There is always a role for it in your patch.

That's it. Really, there isn't more to the story.

Self-generating chiptunes? Very weird LFO shapes? Random gate delay? Stages probably does strange and wonderful things when patched in a certain way.

Flexible input/output layout:

The module detects the presence of jacks on its gate inputs to group its segments: whether it is configured as a complex 6-stage envelope, or 6 individual envelopes, or 3+3, 2+4... depends simply on how you patch it. Dummy patch cables might come handy!

When used as a multi-segment envelope, a segment activation signal is produced on all secondary outputs - for example to trigger an external event when an ADSR envelope enters its decay, sustain or release stages.

In case more than 6 segments are required, up to six modules can be chained together thanks to a connector at the back of the module.

Three segment types:

- Ramp segments go from one voltage to another, in a CV-controlled amount of time, with an adjustable curve (accelerating, uniform, decelerating). They are the building block used for the attack, decay or release segments in envelopes... or for LFOs.
- Hold segments stay at a constant (but CV-controllable) voltage for a programmable amount of time. They serve as the sustain or hold segments in envelopes.
- Step segments glide to a target (CV-controllable) voltage, then stay at this voltage for a certain amount of time until a trigger is received. They are the main ingredient for step sequences, but also for building sequential switches or a sample-and-hold.

Looping:

A segment, or a group of segments, can loop on itself: if the last segment of the envelope is included in the loop, the loop lasts forever. Otherwise, the loop remains active while the gate is high, then continues past the last segment of the loop. These two behaviours allow the creation of self-looping envelopes (LFOs), or the sustain stage of a good old ADSR envelope!

Single segment processing:

Even when they aren't part of any group and don't receive any gate or trigger signals, individual segments can perform interesting functions: Ramp can loop on itself and turn into an LFO, Hold can delay a CV and Step can slew it.

Now patch a trigger signal: the self-looping Ramp turns into a tempo-synced LFO, the Hold segment becomes a pulse generator, the Step segment a sample-and-hold.
Read more
 More than 10 in stock $276.97
Click for better price!
or call +44 20 7424 1960
quote 686269
Cat: 688717 Rel: 19 Jun 20 • View all Synthesisers
 
analog synthesiser
Notes: Inspired by the amazing Roland SH-101, Behringer's MS-1 is a peach of an analogue mono synth, excelling at deep, elastic basslines but also amazing for arps, leads and FX.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, such as a 32-step sequencer, arpeggiator and live performance kit, the MS-1-BK lets you conjure up virtually any sound with incredible finesse and ease. With its 32 semi-weighted full-size keys, pure analog signal path, authentic 3340 VCO with 4 simultaneously-mixable waveforms, plus extremely flexible VCF and VCA filters, the MS-1-BK is sure to become your favorite keyboard. Owning the MS-1-BK is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Great care has been taken in engineering the MS-1-BK, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the MS-1-BK its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

The inspired synthesizer tracks laid down in the 1980s and '90s are etched in the annals of progressive rock, wave, EDM and synth-pop music forever, making them truly classic in every sense of the word. The MS-1-BK lets you recreate all of that magic - or design incredibly fat and original sounds.


The very heart of MS-1-BK's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: cutoff Frequency (10 Hz to 20 kHz); Resonance (0 to self-oscillation); Envelope and Modulation depth, and Keyboard follow (0 to 100%) to dial in the perfect sound. MS-1-BK's VCF can be modulated via the ADSR, keyboard tracking and Bender controller. The Frequency Modulation (FM) Amount knob sets the depth, while the FM Source selector lets you further modify the signal by choosing from: pulse; sawtooth; sub oscillator 1 octave down; 2 octaves down; narrow 2 octaves down, and Noise.

MS-1-BK's Envelope generator features 4 ADSR (Attack, Decay, Sustain and Release) faders that help you craft incredible sounds, and utilizes a 3-position switch for Gate, Gate + Trigger and LFO. When applied to the Voltage Control Amplifier (VCA), the ADSR envelope is used to control the level of the note being played over time. When applied to the VCF, the ADSR envelope is used to control the cut-off frequency of the filter for each note played over time. In addition, the ADSR envelope can also be used to affect the VCO pulse width modulation.

MS-1-BK's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the MS-1-BK are fun, mesmerizing and totally addictive.

When you're ready to strut your stuff and get a little centerstage time, the MS-1-BK has that covered too! Just attach the included guitar strap and handgrip (with pitch bend wheel and a pitch modulation trigger), and take your performance to the next level.

In addition to the great sound-sculpting features already mentioned, the MS-1-BK has still more to offer. The noise generator can also be used as modulation source to create distortion-like effects, which will send your solo soaring into the stratosphere. Glide (portamento) lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate. MS-1-BK's Bender is also assignable to the VCO, VCF and pitch mod wheel on attachable handgrip. You can even modulate the pulse wave via the LFO, envelope or manually - for sounds ranging from mild to wild!

For those who want the numbers, MS-1-BK has 57 knobs, faders and switches, all laid out in a highly-intuitive format that puts the joy back into your music creation. Input and output connections include: MIDI I/O and Thru over USB/MIDI DIN; Velocity Out; CV; Gate; External Clock In; VCF CV In; Hold; External Audio; Phones; and main Output.
Read more
 More than 10 in stock $260.34
Cat: 437059 Rel: 17 May 12 • View all DJ controllers
 
MIDI controller and audio interface with a 4-channel internal soundcard
Notes: Neatly designed slimline DJ MIDI controller from A&H. 52 controls and built-in audio interface. Compatible with any DJ software.

Supplier's notes:
Xone:K2 is a compact, slim line universal MIDI controller - incorporating a 4 channel soundcard, for use with any DJ software.

With no fewer than 52 hardware controls providing up to 171 MIDI commands across 3 layers - plus the ability to link multiple units using X:LINK, saving USB ports on your computer - Xone:K2 has the power and flexibility to put you in touch with the functions and features of your chosen software.

Quick and simple mapping lets you create a unique layout that mirrors your style and puts the functions that matter at your fingertips, whilst 3 colour illuminating switches give at-a-glance feedback - allowing you to work however you decide.

The high quality internal soundcard provides flexible user setup options using the Xone:K2 with headphones, headphones and a mix system or with an external mixer. Xone:K2 comes packed in a black padded case as standard. The case doubles as a stand, bringing the K2 up to the same height as most pro DJ mixers.

Xone:K2 is a compact designed MIDI Controller for use with any DJ software such as Ableton, Virtual DJ, MixVibes, Mixx and Traktor Pro. Xone:K2 can even be used to control lights or VJ software - if it can receive MIDI data it can take commands from K2. What each control does is entirely up to you - you can create a completely customised layout that perfectly fits the way you want to work. Xone:K2 has 52 physical controls - including 12 analogue and 6 endless rotary encoders with push switch, 4 linear faders, and 30 backlit performance switches - providing up to 171 MIDI control commands across 3 layers. We also provide example maps to get you started out the box and information on how to set up your own.

A Latching Layers system lets you assign controls to multiple layers, so a single physical control can be given up to 3 functions. You can configure all, some or none of K2's controls to be linked to the Latching Layers system. As a quick visual reminder, when toggling through layers all switches assigned to a particular layer will illuminate in the appropriate colour.

Xone:K2 has a high quality internal, four channel (2 stereo) 48kHz soundcard. Setup options include using the K2 with a pair of headphones, feeding a pair of headphones and a PA system, or connecting to an external DJ mixer.

Its slim line chassis, soft touch controls and minimal looks set K2 apart from the pack. There's plenty of substance too - Xone:K2 is built to Allen & Heath's renowned touring grade audio and build quality standards, including the use of steel nuts on all rotary controls to protect the circuitry from impact damage.

Xone:K2 comes packed in a black padded case as standard. As well as keeping it safe on the road, the case doubles as a stand, elevating the K2 up to the same height as most pro DJ mixers.

Two or more K2s can be linked via our X:LINK protocol, expanding the control capability. X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, including Xone:DB4 and DB2, to expand MIDI data without using additional USB ports.


Read more
 3 in stock $230.07
Click for better price!
or call +44 20 7424 1960
quote 437059
Cat: 628650 Rel: 17 Oct 16 • View all Synth modules
 
Complete drum voice featuring algorithm selection, operator release envelopes, ratios, waveforms & feedback
Notes: Gritty drum voice module based on new old stock Yamaha FM synthesis chips, also capable of a decent range of synth tones. User-friendly knobby interface with a decent range of CV inputs for modulation.

Supplier's notes:
'Akemie's Taiko' is an authentic complete FM synthesis based drum voice created using original Yamaha IC's. It builds on the same technology used in the mighty Akemie's Castle but in a more complete triggered voice form featuring both signal generation and envelope shaping.

The module provides CV and direct control over a number of FM parameters including algorithm selection, operator release envelopes, ratios, waveforms & feedback. This gives a massive range of unique sounds.

The voice is able to track 1 volt per octave allowing it to be used for melodic lines as well as percussion. Also optional 'frequency ramps' can be enabled for additional audio effects.

The drum voice includes a trigger input as well as accent and choke trigger inputs to add further expressive and rhythmic control.
Read more
 8 in stock $281.33
Click for better price!
or call +44 20 7424 1960
quote 628650
Cat: 526565 Rel: 11 Aug 14 • View all Synthesisers
 
String synthesiser unit with fully polyphonic string sections and monophonic solo sections
Notes: Streichfett combines the best of the now extinct species of String Synthesizers of the 70s and early 80s. Its dual sound engine features a fully polyphonic strings section and a monophonic solo section, which is essential for recreating how adult movies sounded thirty years ago. The Ensemble Effect handles lubrication of the String Section, while the Effects section adds adjustable Phaser or Reverb. Alternatively, the Effect section can be used to animate the strings registration, allowing spectacular sound morphs.

The Solo Section offset presets named Bass, E-Piano or Clavi, and just like in your typical string machine, the sound has little to do with that name. Instead, these are shimmering and slightly percussive sounds that blend well with the string section.

Although the User Interface is simple and easy to comprehend, it controls a rather complex sound engine which is capable to delivers rich and creamy pads unlike any other instrument.

Twelve patches can be stored and selected in the Memory section, USB and MIDI are of course on board.
Read more
 5 in stock $227.44
Click for better price!
or call +44 20 7424 1960
quote 526565
Cat: 405262 Rel: 24 Sep 10 • View all Studio headphones
 
Reference-grade headphones for audiophiles & professionals
Notes: Classic high-end headphones suitable for serious listening or mix applications. Open-backed design gives them a natural, detailed presentation that justifies the step up in price from cheaper models.

Supplier's notes:
The HD 600 Avantgarde are audiophile-quality, open dynamic hi-fi/professional stereo headphones. The advanced diaphragm design eliminates standing waves in the diaphragm material. The HD 600 can be connected directly to hi-fi systems of the highest quality, in particular DAT, DVD, MD and CD players. These headphones are an ideal choice for the professional recording engineer recording classical music.
Read more
MRP:$484.15 SAVE 39%
 8 in stock $294.41
Click for better price!
or call +44 20 7424 1960
quote 405262
Cat: 561278 Rel: 16 Jul 15 • View all MIDI controllers
 
Pro controller & performance sequencer with 2 monophonic step sequencers & 16 track drum sequencer
Notes: The ultimate sequencing powerhouse.

BeatStep Pro is unique: a world-class controller, performance sequencer and composing tool all in one very connectible package.

BeatStep Pro is unlike anything you have ever used on stage or in the studio. Wherever you are, whatever gear is available, taking control of the creative process has never been so easy.

Step into the spotlight

Two independent melodic sequencers and a drum sequencer put thousands of on-the-spot ideas at your disposal.

With BeatStep Pro you are master of the performance, taking full control of virtual devices, analog and digital instruments, drum machines and iPad apps all at once. 16 Projects are instantly accessible, each of which contains 16 sequences per melodic sequencer and 16 patterns for the drum sequencer. That's over 4000 possible combinations per Project!

Each melodic sequence can be up to 64 steps long with individual articulation of pitch, velocity and gate time per note. These are the most powerful step sequencers ever made. The drum sequencer has 16 separate tracks per sequence (one per pad). Record in real time from the pads or use the step buttons for that classic drum machine workflow.

Perfect performance

BeatStep Pro brings together the most unique and sought-after performance effects available: a looper with a touch strip, a randomizer, swing settings and a slew of hands-on controls that will make your performances the stuff of legend.

Take control

Control mode lets you trigger clips in your favorite DAW, play sounds from an external device or make magic with your plug-in of choice. Take your music from idea to reality with BeatStep Pro.

Plays well with others (very, very well)

With BeatStep Pro you can connect to virtually any musical device within reach: computers, virtual instruments, modular synths, drum machines; anything with USB, MIDI in and out, CV/Gate outputs, Clock in and out, or DIN sync. From the oldest music technology to the newest and beyond, BeatStep Pro is bound to become the centerpiece of your setup and the heart of your creative efforts for many years to come.
Read more
MRP:$307.50 SAVE 31%
 3 in stock $213.27
Cat: 769789 Rel: 20 Mar 20 • View all Synth module accessories
 
Eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:

64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:

Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz
Read more
MRP:$232.91 SAVE 12%
 3 in stock $203.90
Click for better price!
or call +44 20 7424 1960
quote 769789
Cat: 620699 Rel: 10 Aug 16 • View all Synth modules
 
USB/DIN MIDI voice and clock interface synth module in Eurorack format - 6HP wide
Notes: The uMIDI provides all the essentials to control and sync your Eurorack modular from your computer, iPhone/iPad, or hardware MIDI device with a minimum of fuss. No menu diving or configuration scripts, just two buttons. The connectivity, feature set, and compact size make the uMIDI ideal for integrating your modular with the rest of your rig while not taking up too much space in your case.

The upper clock section features a dedicated 16th note clock output ideal for synchronizing a Eurorack sequencer like the Metropolis. A second clock output with selectable divisions can be used when difference sync events are needed. The run and reset outputs can be used to reset your Eurorack sequencers in tandem with any external sequencer or DAW.

The lower half of the uMIDI gives you everything you need to control a single voice synth via MIDI. Just connect either a USB or DIN MIDI cable to the module, LEARN a channel, and start playing.

Future firmware updates over USB are made easy with the Firmware Updater software.
Read more
 2 in stock $240.99
Cat: 569552 Rel: 10 Apr 15 • View all Synth modules
 
Mixer/keyframer synth module, 18HP size
Notes: The heart of Frames is a 4-channel analog VCA under tight digital control. Through flexible input/output mixing and normalling options, it can be patched to serve the following purposes (among others):

- 4-channel attenuator/VCA.
- 4-channel mixer.
- 4-channel programmable CV source.
- Quadraphonic signal dispatcher.

But what makes Frames truly unique is the way in which channel/CV levels can be controlled, using a technique inspired by computer animation. Frames allows up to 64 configurations of the 4 level knobs to be stored and recalled throughout the course of its big Frame knob. By rotating the knob (or sending a CV to the Frame modulation input and adjusting its amount with the attenuverter), the configurations are morphed into one another.

To fine-tune the animation and get varied morphing or sequencing results, the following options are available for each of the 4 channel:

- Easing curve (stepped, linear, exponential, logarithmic, sine, bouncy)
- Attenuation response of the level knob, from linear to logarithmic

With a bit of patching and imagination, Frames can also be repurposed as a 4-channel sequencer, a multi-stage envelope generator or a trajectory generator for quadraphonic panning...

Mutable Instruments modules are packed with features and Frames is no exception: Frames can switch easily to an entirely different mode of operation in which it becomes a wavetable quadrature LFO.
Read more
 8 in stock $245.33
Cat: 452421 Rel: 11 Apr 12 • View all DJ interfaces
 
Professional digital vinyl system with 6-channel audio interface, 4-track decks and Remix Decks
Notes: Probably the easiest way to convert your turntable setup into a full four-deck digital vinyl system: audio interface, control vinyl, Traktor software and cables in one box (plus timecode CDs as a bonus). Bargain.

Supplier notes:
The Traktor Scratch A6 is the straight-up digital vinyl system for spinning MP3s using super-tight vinyl and CD control. The included Traktor Audio 6 interface, timecode vinyl and CDs, and the flagship Traktor software provide pro credentials at a very attractive price.

The Traktor Scratch A6 is designed for DJs who need rock-solid performance, amazing audio quality and incredible ease of use.The included Traktor PRO 3 software with Remix Decks allows for a new level of creativity, seamlessly merge the worlds of DJing and live performance. Powered by the Traktor Audio 6 interface, you can also expand your setup to include the Traktor Kontrol F1 for ultimate and intuitive control over the software's Remix Decks.

Get ready to unleash the full sonic potential of your tracks thanks to the included Traktor Audio 6, the high-gain audio interface for DJs who demand premium sound quality and extra-loud output. With 6 inputs and 6 outputs, the TA6 is destined to be the centerpiece of your live or studio setup. And if you're looking for even more connectivity and a MIDI port (e.g. for MASCHINE sync), check out Traktor Scratch A10.

It's never been easier to spin digital files. Hook up the system in seconds thanks to the plug-and-play hardware and software integration. The software interface features an easy-on-the-eye Essential View, focusing on the important elements. Innovative TruWave colored waveforms let you see your tracks like never before.

With full iTunes integration, iPod compatibility and Crate Flick cover art browsing, selecting your tracks is a cinch. The included SoftSync feature gives you optional help in beat-matching.

The Traktor Scratch A6 offers an advanced selection of creative features for developing and defining your own trademark sound. Super-intuitive looping and cueing functions have been further enhanced with the addition of Remix Decks for integrating loops and one-shot samples into your sets.

Store your favorite loops in the library, along with the included loop content, and open up another dimension in creative DJing, easily remix and re-edit tracks on the fly.

Use the exclusive scratch sounds to spice up your routine and rock the 6 studio-quality effects which, thanks to the additional ins and outs on the audio interface, you can route like an external effects box.

The newly developed Native Scratch technology features Traktor Scratch MK2 timecode vinyl and CD control for the next step in tight timecode performance. Spin super-precise 2 kHz control signal on 120g vinyl, it feels just like your digital track was cut to a 12" and with the innovative vinyl marker stickers you get clear visual reference at all times.

Alternatively, use your CDJs with Traktor MK2 timecode in relative mode, and stay ahead of the competition, with Traktor's loops and hot cues and your CDJs' cue and manual looping functionality, you get the best out of both systems.
Read more
MRP:$325.82 SAVE 32%
 3 in stock $222.76
Click for better price!
or call +44 20 7424 1960
quote 452421
Cat: 775217 Rel: 08 Jul 20 • View all Synth modules
 
MIDI controller module
Notes: A 6 HP version of the VCMC module. Simpler, less connectivity but all the flexibility and power from VCMC.

It's the exact same concept as the VCMC in that you pump in CV and control MIDI gear or your DAW and software instruments but in a much smaller package. The faders and buttons have been droppws and just give you 8 CV inputs, a big white knob and that rather nice little screen. The MIDI connections are taken care of by a TRS socket and USB for direct connection to a computer.

Essentially, you've lost the manual controls over MIDI gear that the faders and buttons provided and are just going straight with triggers, notes or modulation.

Each of the 8 CV inputs can be mapped to any MIDI message or controller number, note or event. You can send clock, program changes, note on/off and everything you'd expect in MIDI. It's a pretty great way of connecting your modular to your external instruments or software while keeping the control in the Eurorack rather than ceding control to the DAW. And if you prefer things the other way around then Befaco also makes a MIDI Thing MIDI-to-CV interface.
Read more
MRP:$336.28 SAVE 28%
 7 in stock $240.97
Cat: 640977 Rel: 30 May 17 • View all Synth modules
 
Stereo filter module in 6HP with high pass & low pass circuits
Notes: The WMD Overseer is a stereo filter inspired by those commonly found on DJ mixers and DJ software. It features two filters on one knob, stereo ins and outs, bypass switch, and a fun stereo "Tilt" function which offsets the filter cut-off frequency across the stereo field creating some dizzying stereo effects.

Controls:

- Bypass Switch: Turns the filter on and off. LED will be red when the filter is engaged. Toggles on button release.
- Filter Cut-off Knob (the big one): Turn Left for Low-Pass filtering and Right for High-Pass filtering. No filtering in the middle. Becomes offset with CV.
- Filter Cut-off Switch: Switched to the left limits both filters to audible frequencies so you cannot accidentally filter out all signal. Switched to the right disables the limit allowing you to filter the signal into oblivion.
- Resonance knob: Controls the amount of frequency boost at the cut-off point. Will not self-oscillate. Knob becomes offset with CV.
- Tilt Knob: In the middle applies no tilt. Rotate left or right to off set the offset to the filter cut-off on each side. Knob becomes offset with CV.
- Tilt Switch: Allows you to apply the Tilt function to either or both HP and LP. Left for LP, right for HP, centre for both.
- HP - LP Knobs: Attenuverters for incoming CV over the filters.
- HP - LP Switch: Switch to the right sends 5V to the HP - LP knobs and turns them into independent controls for the cut-off frequency of both filters, allowing you to control both filters at the same time with these independent knobs.

Jacks:

- HP: CV input for the High-Pass filter
- LP: CV input for the Low-Pass Filter
- Tilt: CV input for the Stereo Tilt function
- Res: CV input for the Resonance of both filters
- Master: CV Input over both filters, accepts -5V to +5V

Other:

- Input Impedance: 40k
- Output Impedance: 220 ohms
- Frequency Response: 20Hz to 20kHz +-1dB
- LPF Cut-off Range (-3dB Fc)
- Limited LPF: 22Hz to 32kHz
- Unlimited LPF: 1Hz to 32kHz
- HPF Cut-off Range (-3dB Fc)
- Limited HPF: 3Hz to 12kHz
- Unlimited HPF: 3Hz to 38kHz
- Signal Path: AC Coupled at all times
Read more
MRP:$327.13 SAVE 27%
 3 in stock $237.72
Cat: 625058 Rel: 22 Sep 16 • View all Synth modules
 
Mini Mod Vintage Transistor Core VCO Module
MRP:$340.21 SAVE 22%
 3 in stock $266.06
Cat: 780761 Rel: 23 Jul 20 • View all Hi-fi cartridges
 
Cartridge & stylus
Notes: The Gold3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency.

What's the difference between Gold3 and Silver3?
Approximately 5% of the Silver2 production runs meet higher test specifications. The cartridges that exhibit these specs are hand-selected to become a Gold3.
Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system.

This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Gold3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring some new techniques to the Silver3.

This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Gold3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Silver2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.
Read more
MRP:$299.65 SAVE 17%
 4 in stock $249.70
Click for better price!
or call +44 20 7424 1960
quote 780761
Cat: 602195 Rel: 10 Aug 16 • View all Synth modules
 
Full featured VCO/LFO synth module - 8HP wide
Notes: Full-featured triangle core VCO/LFO

The Dixie II+ is a larger variant of the classic Dixie II. Using the same great triangle core oscillator, it adds a number of features to make it even more versatile with only a modest increase in size. The Dixie II+ makes a great primary oscillator for a modular system, or a great companion the Rubicon.
Read more
 4 in stock $226.80
Cat: 631792 Rel: 13 Apr 17 • View all Synthesisers
 
Analog synthesiser with all-new synthesis structure optimized for monophonic sounds & sequences - black
Notes: Next-generation monophonic analog synthesizer in a vivid five-colour line-up:
Fully programmable, analog synthesis for all players; monologue is the next-generation monophonic synthesizer that shares the spirit of the acclaimed minilogue, with a completely new voice and powerful new features.

The monologue is a 25-key, fully programmable monophonic analog synthesizer with a voice all its own. While sharing its sleek layout, knob-per-function workflow and high-quality construction with the best-selling minilogue, monologue is a truly unique new synth for all types of musicians; featuring new voicing and sound sculpting abilities - at an amazing price. The monologue's completely new filter, modulation, drive, and LFO can generate powerful basses and sharp leads, creating awesome mono sounds that showcase its single-voice design. The step sequencer has also been dramatically expanded, allowing more intuitive and more complex editing. With a line-up that gives you a choice of five eye-catching colours, this compact instrument has a strong personality to match your own.

Redesigned monophonic analog circuitry:
The monologue contains monophonic analog synthesizer circuitry that builds on the circuitry of the minilogue. But that doesn't mean that the monologue is simply a one-voice model of the minilogue. It's a monophonic beast with stunning power that comes from a redesigned envelope section, modulation routing, and a filter with powerful low-end punch.

The structure is 2VCO, 1VCF, 1EG, 1VCA, and 1LFO. In addition to the same distinctive circuits as on the minilogue (such as the wave shaping that shapes the overtones of the oscillator, and a sync/ring switch), the filter section uses a two-pole filter to deliver aggressive sound. Newly featured is a drive circuit that adds overtones and distortion to the sound, letting you generate fat basses and sharp lead sounds to your heart's content. The LFO rate can be adjusted into an unprecedentedly ultra-high-speed range to generate crazy space-shattering sounds, or switched to one-shot mode to act, in a sense, as an additional envelope.

Fully programmable:
The monologue goes beyond analog synths in its price range by adding 100 preset locations. Select a program for instant access to great sounds - - ranging from thick basses to deep subs to brilliant cutting leads and even percussive sequences. No need to have deep synthesis knowledge; just choose a sound and tweak - a workflow that is very familiar with musicians today. Built-in programs provide 80 preset sounds and sequences made by creative artists around the world including legendary electronic artist Aphex Twin, plus 20 user locations for saving custom sounds.

16-step sequencer for highly-evolved motion sequences:
The step sequencer of the monologue has been significantly enhanced to deliver musical, complex rhythms that are easy to capture, see, and edit. It supports both real-time recording with overdubbing capability as well as step recording that lets you record simply by pressing keys in the desired order, and you can also use the 16 physical buttons for quick editing or for improvisatory performance. The motion sequence function lets you record up to four knob movements to apply time-varying change to the sound, and allows you to record not only continuously changing values as on previous models, but also values with step-wise variation. Since it's designed to let you create different sounds at each step, you can make unprecedented sequences, such as a sequence that generates a drum pattern from a single program.

There's also a key trigger function that lets you play back a sequence while you hold down a key, and even transpose it. Another new function is slide, which can be used to produce smooth bass lines by specifying portamento for each step.

Battery-powered analog:
From smooth curves to muscular straight lines. The stylish visuals featuring aluminium and wood are inherited directly from the minilogue, but have been modified to a straight, direct design that bespeaks the power of a monophonic instrument. In spite of its stout construction, the compact and light-weight body is only 1.7 kg / 3.78 lbs., providing an unprecedented combination of toughness and portability.

In addition, unlike most analog synthesizers in its class, the monologue can operate on batteries. Even if you're a hardware performer who uses numerous units, you won't need to worry about providing additional power supplies and installation space.

Sync with Audio Sync:
In addition to 5-pin In/Out and USB MIDI, monologue includes Audio Sync connectivity, which allows it to play in time and integrate seamlessly with KORG volcas, electribes, minilogue and SQ-1. Use the monologue with your DAW as a USB MIDI controller or a versatile analog voice. Send clock over USB and use Audio Sync to chain monologue's clock to other Audio Sync-equipped products.
Read more
 2 in stock $244.89
Click for better price!
or call +44 20 7424 1960
quote 631792
Cat: 688722 Rel: 19 Jun 20 • View all Synthesisers
 
analog synthesiser
Notes: Blue version of Behringer's tribute to the legendary Roland SH-101. Classic Roland-inspired 80s analogue sound with a gorgeously squelchy resonant filter and powerful oscillator with beefy sub.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, such as a 32-step sequencer, arpeggiator and live performance kit, the MS-1-BU lets you conjure up virtually any sound with incredible finesse and ease. With its 32 semi-weighted full-size keys, pure analog signal path, authentic 3340 VCO with 4 simultaneously-mixable waveforms, plus extremely flexible VCF and VCA filters, the MS-1-BU is sure to become your favorite keyboard. Owning the MS-1-BU is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Great care has been taken in engineering the MS-1-BU, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the MS-1-BU its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

The inspired synthesizer tracks laid down in the 1980s and '90s are etched in the annals of progressive rock, wave, EDM and synth-pop music forever, making them truly classic in every sense of the word. The MS-1-BU lets you recreate all of that magic - or design incredibly fat and original sounds that will make you a legend in your own right!

MS-1-BU's authentic 3340 Voltage Controlled Oscillator (VCO) provides an incredible range of 4 simultaneously-mixable waveforms for sculpting the perfect sound. Options include: saw, triangle, square/pwm and octave-divided square sub-oscillator. Additionally, the VCO can be adjusted across a wide, 4-octave range (16', 8', 4', and 2'). This amazing flexibility gives you the tools needed to be your creative best.

The very heart of MS-1-BU's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: cutoff Frequency (10 Hz to 20 kHz); Resonance (0 to self-oscillation); Envelope and Modulation depth, and Keyboard follow (0 to 100%) to dial in the perfect sound. MS-1-BU's VCF can be modulated via the ADSR, keyboard tracking and Bender controller. The Frequency Modulation (FM) Amount knob sets the depth, while the FM Source selector lets you further modify the signal by choosing from: pulse; sawtooth; sub oscillator 1 octave down; 2 octaves down; narrow 2 octaves down, and Noise.

MS-1-BU's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the MS-1-BU are fun, mesmerizing and totally addictive.

When you're ready to strut your stuff and get a little centerstage time, the MS-1-BU has that covered too! Just attach the included guitar strap and handgrip (with pitch bend wheel and a pitch modulation trigger), and take your performance to the next level.

In addition to the great sound-sculpting features already mentioned, the MS-1-BU has still more to offer. The noise generator can also be used as modulation source to create distortion-like effects, which will send your solo soaring into the stratosphere. Glide (portamento) lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate. MS-1-BU's Bender is also assignable to the VCO, VCF and pitch mod wheel on attachable handgrip. You can even modulate the pulse wave via the LFO, envelope or manually - for sounds ranging from mild to wild!

For those who want the numbers, MS-1-BU has 57 knobs, faders and switches, all laid out in a highly-intuitive format that puts the joy back into your music creation. Input and output connections include: MIDI I/O and Thru over USB/MIDI DIN; Velocity Out; CV; Gate; External Clock In; VCF CV In; Hold; External Audio; Phones; and main Output.

Read more
 More than 10 in stock $266.55
Cat: 569583 Rel: 30 Jun 15 • View all Synth modules
 
Dual analog VCA and 2-pole VCF, with digital control path - 12HP size
Notes: Streams provides two channels of extremely flexible signal dynamics manipulation.

Each channel consists of an analog voltage-controlled filter and amplifier (VCFA). The response curve of the amplifier section is continuously variable from exponential to linear. The amplifier gain is directly controllable from a CV input, through an attenuator. But what makes Streams truly unique is the multi-purpose EXCITE input. The signal routed to this input is analyzed by a micro-controller and translated into internal control voltages for the VCFA, turning Streams into a very versatile signal contouring tool:

Envelope generator
The EXCITE input can work as a trigger input, triggering an internal AD or AR envelope routed to the gain and the filter cutoff (in variable amount). With only 6-HP of space, you can shape an oscillator or noise source into a full-bodied sound.

Vactrol curve generator
The EXCITE input is processed by a digital model of a resistive opto-isolator (Vactrol), controlling the gain and the filter cutoff (in variable amount). The digital emulation allows the modification of properties of opto-isolators - such as response time - which are otherwise difficult to control. The virtual vactrol response can be either optimized for processing CVs, or triggers (for "plucked" sounds).

Amplitude and frequency content follower
The envelope and cutoff of the EXCITE signal is measured, and applied to the signal on the VCFA input.

Compressor/limiter
Streams' VCF is disabled, and the VCA is used to control the dynamics of the input signal. An intuitive control scheme allows the compressor to be used either for peak reduction/limiting operation; or for boosting signal levels with soft-limiting. The EXCITE input can be used as a sidechain.
Read more
 4 in stock $218.07
Click for better price!
or call +44 20 7424 1960
quote 569583
Cat: 569585 Rel: 30 Jun 15 • View all Synth modules
 
Tidal modulator signal generator Eurorack synth module - 14HP wide
Notes: Tides is all about waves that go up and down, from minute-long cycles to audio rates... This module is Mutable Instruments' unique take on the looping AD envelope generator - pushing this well-known trope to unknown territories.

The core of the module is a digital asymmetric triangle function generator, which can be used in AD and AR modes (for envelope generation), or looping (as a VC-LFO or VC-DO). The triangle generator is followed by a wavetable waveshaper providing linear, exponential, logarithmic, sinusoidal, or arc-sinusoidal shapes for the A and D segments. Then, a second processor applies either a 2-pole low-pass filter to the waveform, smoothing its sharp edges; or a rubbery wavefolder, adding kinks and "bounces" to the waveform. Because Tides has been designed from the ground up to work at audio rates with minimal aliasing, and because all its parameters are under voltage control, it can be used as a unique self-contained synth voice.

Tides' advanced features include:

- Output level CV input (digital VCA).
- Dual outputs: standard unipolar waveform, and "double-shot" waveform with a positive spike during the ascent and a negative spike during the descent. At audio rate, both of them have a different sound.
- Accurate V/Oct tracking with straightforward calibration procedure.
- Freeze input to temporarily hold the waveform.
- Clock input to lock onto a multiple or fraction of a trigger sequence... or audio signal, PLL-style.

*For audio demos, please visit - http://mutable-instruments.net/modules/tides/demos
Read more
 1 in stock $215.89
Click for better price!
or call +44 20 7424 1960
quote 569585
Cat: 702719 Rel: 02 Oct 18 • View all Music production software
 
Audio production upgrade software featuring 150+ products, more than 90000 sounds, and over 900 GB of content
Notes: ***FOR OWNERS OF KOMPLETE ULTIMATE 8-12***

KOMPLETE 12 ULTIMATE is the definitive instruments and effects suite for professional production, scoring, performance, and sound design. This collector's edition contains 100+ premium instruments and effects, plus the full SYMPHONY SERIES - COLLECTION, and more than 40 Expansions.

Cutting-edge platforms for synthesis and sampling:

Build just about anything you can imagine with KOMPLETE 12's two builder platforms. KONTAKT 6's advanced sampling and REAKTOR 6's flexible modular approach power thousands of innovative instruments and effects from NI, hundreds of leading manufacturers, and a growing community of users. Not ready to dive in at the deep end? Start making music straight away with comprehensive built-in libraries.

16 orchestral and cinematic instruments:

KOMPLETE 12 ULTIMATE Collector's Edition contains an extensive set of sampled instruments for any scoring project, ranging from the rich orchestral libraries of SYMPHONY ESSENTIALS - COLLECTION, to the movie-trailer ready sounds of ACTION STRINGS and ACTION STRIKES, and innovative sound design tools like THRILL, KINETIC TOYS, and KINETIC METAL.

16 synthesizers:

From faithful hardware recreations, to cutting-edge designs that go beyond the capabilities of even the most out-there analogue gear, KOMPLETE 12 ULTIMATE Collector's Edition boasts 16 expressive, versatile synthesizers. Dive into FM synthesis with FM8, discover new textures with FORM, or explore the uncharted sonic worlds of the forthcoming MASSIVE X. Unique to KOMPLETE 12 ULTIMATE Collector's Edition are REAKTOR 6-powered favourites like FLESH, RAZOR, and SKANNER XT.

30 sampled instruments:

KOMPLETE 12 ULTIMATE Collector's Edition contains 30 sampled instruments, from unique pianos like UNA CORDA, THE GIANT, and ALICIA'S KEYS to the pop-production sheen of SESSION STRINGS PRO 2, and the full DISCOVERY SERIES: COLLECTION.

12 drums and percussion instruments:

KOMPLETE 12 ULTIMATE Collector's Edition includes dedicated percussion tools for everything from pop and rock grooves and boom-bap beats to movie-trailer impacts. Recreate the sounds of yesterday with the full suite of Abbey Road drums, design your own kits with POLYPLEX and BATTERY 4, or create dramatic wide-screen tension with DAMAGE.

28 effects:

Sculpt, tweak, and tailor your sound with 28 studio-grade effect plug-ins - from REPLIKA XT's infinitely tweakable delays to the retro-meets-futuristic EFFECTS SERIES - MOD PACK and CRUSH PACK, and a full suite of mixing tools included in the SOLID MIX SERIES, VINTAGE COMPRESSORS, and more. You also get 53 additional effects and 17 amp sims courtesy of GUITAR RIG 5 PRO.

Includes Expansions:

KOMPLETE 12 ULTIMATE Collector's Edition includes 20 Expansions - genre-specific sound packs loaded with synth presets, drum kits, one-shots, samples, and loops. Created by top artists and sound designers, Expansions can be used in any DAW and work with a range of Native Instruments products, including MASSIVE, BATTERY 4, and MONARK.

Find your sound with Komplete Kontrol:

It's not easy to make sense of over 90,000 sounds. That's why KOMPLETE 12 ULTIMATE Collector's Edition comes with KOMPLETE KONTROL, a handy plug-in that makes light work of browsing through all your instruments and effects, whether using NI hardware or your mouse and keyboard. And since each instrument preset comes with an audible preview, you can audition all your sounds without waiting for extra plug-ins to load.

Get hands-on with NI hardware:

Everything in KOMPLETE 12 ULTIMATE Collector's Edition comes ready-mapped to your NI hardware by the plug-in developers themselves, so getting hands-on with all your instruments and effects is as simple as connecting a KOMPLETE KONTROL keyboard or MASCHINE controller. And thanks to NKS, you get exactly the same experience with hundreds of plug-ins from more than 75 leading manufacturers.
Read more
MRP:$652.94 SAVE 58%
 2 in stock $271.51
Click for better price!
or call +44 20 7424 1960
quote 702719
Cat: 664142 Rel: 26 Sep 17 • View all Effects pedals
 
Synth engine guitar effects pedal with 3 operation modes
Notes: Building on the synthesis platform of the award-winning Superego, our new Superego+ raises the bar when it comes to creating synth effects, sound layers, glissandos, infinite sustain and more. Plus, we've added a complete effects section featuring 11 effects types, an EXP input for effect parameter control and an EXT jack for a 3-button controller.

The Superego+ is equipped with the following effects:

- DETUNE: pitch detune, EXP pedal controls pitch
- DELAY: warm, analog sounding delay, feedback is preset, EXP controls delay time up to 2 seconds
- ECHO: pristine digital delay, feedback is preset, EXP pedal controls delay time up to 2 seconds
- FLANGE: Electric Mistress style w/filter matrix, rate and feedback. EXP pedal controls rate
- PHASE: Small Stone style phase shifting with rate and depth control. EXP controls rate
- MOD: pitch-based vibrato or chorus. EXP controls rate
- ROTARY: rotary speaker style sound. Depth controls tweeter/horn balance. EXP pedal controls rate
- TREM 1: sine wave tremolo. EXP controls rate
- TREM 2: square wave tremolo. EXP controls rate
- PITCH: pitch shifting effect over a +/- one octave range. EXP controls whammy
- FILTER: resonant low-pass filter. EXP pedal controls frequency

The pedal provides enough sound shaping control to please the most sonically adventurous player and is equipped with Dry, Effect, Attack, Decay, Threshold, Layer and Gliss knobs, plus Rate and Depth knobs for the Effects Section. Four foot-switchable Freeze modes: Moment, Sustain, Auto and Latch, plus a Live Effects mode where the dry signal is routed thru the built-in effects and the internal synth engine is disabled, are included.

The polyphonic Superego+ works with guitar as well as other instruments including bass, keyboards, vocals, drums, etc. and comes equipped with an EHX 9.6DC-200 AC Adaptor.
Read more
MRP:$303.57 SAVE 17%
 2 in stock $252.97
Click for better price!
or call +44 20 7424 1960
quote 664142
Cat: 599151 Rel: 17 Oct 16 • View all Studio monitors
 
Compact bi-amplified studio reference monitors with on-board 56-bit DSP for linear frequency response - 50W RMS total power
Notes: Linear frequency response. Zero coloration. Transparency. Headroom. To hear the truth, you need reference speakers that offer up. Your studio monitors deliver, but what about when you're on the go? What if there was a reference monitor that could free you from the confines of the studio walls and provide you the truth in your music no matter where you are - mixing in a small makeshift recording space, mastering in a hotel room, working in your own studio, or composing on the go? Wouldn't that be sweet?

Now, with iLoud Micro Monitor, you can hear the truth in your music anytime and everywhere. The smallest active studio reference monitoring system in the world, iLoud Micro Monitor provides you with ultra-accurate true linear frequency response with no coloration of sound, and can do so in every listening environment. Sound too good to be true? Read on...

iLoud Micro Monitors are two extremely portable, high-performance bi-amped speakers that deliver a combined 50W RMS of power for superior bass, plenty of headroom and an expansive stereo image. Whether you're recording, editing, mixing, or mastering audio, iLoud Micro Monitor ensures your mix will translate well to the huge variety of consumer devices - headphones, home stereo systems, gaming consoles, car audio systems, TVs, and other listening systems.

With iLoud Micro Monitor, you will hear the truth in your music no matter whether you're mixing, mastering or just listening to your favourite tunes at home. And best of all, it offers its portability, power and flexibility at a price that's affordable for everyone.

A legacy of power:
When the original iLoud Bluetooth speaker was released, it set a new standard for portable power and sonic accuracy. iLoud Micro Monitor is a natural evolution of that design, and just like its highly popular predecessor, it offers a completely new and unmatched portable sonic experience.

Its two speakers are powered by ultra-efficient class D power amplifiers that push a combined 50 W RMS of power. Each speaker sports a 3/4" silk dome tweeter, a 3" paper-cone performance woofer and a large-flaring front-firing bass reflex port. Thanks to these features, it's able to deliver pleasing high frequencies, an exceptionally "open" midrange and a solid and controlled low end. Simply put, iLoud Micro Monitor's sound is so good that it's nearly inconceivable for a speaker system of this size and at this price point.

Sonically Transparent Monitoring System:
iLoud Micro Monitor sounds amazing and real. But why? Well, a part of that is due to its internal 56-bit digital signal processor (DSP). This DSP is responsible for things like taking care of the frequency and phase response of the monitor as well as also controlling the dynamic range so that the drivers are always controlled. It also acts as a digital crossover that allows for invisibly smooth transitions between the drivers themselves.

Adjustable audio:
You're bound to come across all sorts of listening environments when you're on the go. Most speakers can't handle this kind of variety, but iLoud Micro Monitor can. Its internal DSP is controllable thanks to three dedicated EQ switches. You get switches for bass and treble as well as a "DESKTOP" compensation switch - this lets you switch between a "free field" and "desktop" setup effortlessly.

You can also position iLoud Micro Monitor at two angles of inclination, so you can optimize your listening experience to suit the characteristics of the room you're working in.

Get connected:
You can easily use iLoud Micro Monitor with all your favourite gear. Sending an audio signal to it couldn't be easier. It has inputs for both RCA and 1/8" connectors, and it can also be paired via Bluetooth to any Bluetooth-enabled device. With all of its inputs, you'll always be able to use its ultra-linear sound to monitor your music no matter where you are or what device you're using.

The perfect laptop monitoring companion:
Reference monitor sound anytime and everywhere - iLoud Micro Monitor makes it possible. Its two speakers make for one incredibly small and portable system that delivers exceptional sound in any environment. Their compact size make for the perfect monitoring system to use while traveling with your laptop. They easily pack up into a gig bag or backpack so you can use their phenomenal sound anywhere.

***NOW INCLUDES FREE T-RACKS METERING SUITE UPON REGISTRATION WITH IK MULTIMEDIA***
Read more
 5 in stock $261.33
Cat: 698452 Rel: 21 Aug 18 • View all Effects pedals
 
Digital distortion pedal with high gain modern preamp
Notes: The WMD Geiger Counter is hundreds of entirely new face melting sounds. A high gain modern preamp drives an 8 bit computer, creating sounds which range from nice (tubey overdrive, lofi aliasing, hot gated leads) to total madness (impossible amounts of gain, multiple octave foldover, harsh digital data errors, and piercing sculpted noise).

- High Gain Modern Preamp
- Dramatic Tone Control with Disable
- Sample Rate from 260Hz to 58kHz
- 1 to 8 Bit Depth with Mask mode
- 252 Wave Table Modulator
- CV In for Expressive Control
- Always saves settings
- Hand Wired True Bypass
- Top Quality Components
- Super Hard Epoxy Powder Finish
- Standard 9V Power Jack
- 4.5" x 3.5" Small Footprint
Read more
MRP:$366.38 SAVE 23%
 1 in stock $281.31
Click for better price!
or call +44 20 7424 1960
quote 698452
Items 1 to 50 of 408 on page 1 of 9
1  2  3  4  5  6  7  8  9  »

Filter

Saved Searches
Save current search
Release Date
Close