100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Format: All Vinyl CD DJ Equipment Studio Equipment
View:
Options
Items 1 to 50 of 2,720 on page 1 of 55
1  2  3  ...  55  »
Cat: 732306 Rel: 09 Sep 19 • View all Synth modules
 
Stereo thru-zero state-variable VCF - 16HP
Notes: The only module named after a Swedish botanist? Possibly. Relentless synth innovator Dave Rossum pushes the boundaries again with a state-variable stereo filter offering through-zero frequency modulation. Sounds complicated. Sounds good.

Supplier notes:
Following in the tradition of Evolution and Morpheus, LINNAEUS represents yet another Dave Rossum innovation in filter technology.

LINNAEUS is a stereo state-variable filter that provides the unique ability to linearly modulate its resonant frequency through zero into negative frequency, while maintaining stability. With extensive voltage control of nearly every parameter, Linnaeus lets you manipulate the filter's natural response curve in new ways, to create both subtle and dramatic timbral effects. And with a "one-knob-per-parameter" interface, LINNAEUS inspires sonic creativity that invites (and rewards) real-time interaction.

LINNAEUS's cutoff/resonant frequency is exponentially voltage controllable from sub-audio to ultrasonic frequencies, while its resonant gain (Q) is exponentially voltage controllable from 0dB to greater than 60dB.

LINNAEUS's channel output response characteristics are independently and continuously variable from Lowpass, through Bandpass, Highpass and Notch, to Low and High Shelving characteristics. Voltage control of the response characteristics are independently selectable for each of the two channels.

The linear thru-zero modulation is provided by an integrated modulation oscillator and/or an External Linear FM modulation input.

The voltage-controllable modulation oscillator can track the filter's exponential frequency or operate independently. The modulation oscillator's output waveform is continuously variable from Off through Sine, Triangle, and Sawtooth, to Square. The modulation oscillator output is summed with the external linear FM input and applied to the modulation index VCA, which controls the linear thru-zero modulation index from zero to 8X. The modulation index is, of course, also voltage controllable.
Read more
 5 in stock $396.59
Click for better price!
quote 732306
UDG
Cat: 747659 Rel: 13 Sep 19 • View all Studio accessories
 
hardcase for NI Maschine Mikro MK3 interface
Notes: A Digital DJ looking for a professional case solution for your NI Maschine Mikro MK3 interface? Then don't look further as UDG has developed a super light EVA Hardcase Protector designed for life on the road. The UDG Creator NI Maschine Mikro MK2 Hardcase Protector is constructed from durable lightweight compression moulded EVA material with a laminated Nylon exterior. The Case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Maschine Mikro MK3 Interface, the Case is perfect for the travelling artists that needs to protect their equipment.
Read more
 1 in stock $38.71
Cat: 745086 Rel: 09 Sep 19 • View all MIDI keyboards
 
Smart, versatile controller with 25 high quality keys, travel-friendly features & powerful software included - black & white edition
Notes: A new controller keyboard from Music tech pioneers Arturia that excites both new users and experienced professionals alike. MicroLab is a small-scale MIDI keyboard with smart design features that you can take anywhere.

THE KEYS:

MicroLab features the same professional slim-keys as their industry standard KeyStep controller. The keybeds found on budget controllers are often not very inspiring, but the 25 expressive, velocity-sensitive keys on MicroLab are simply a joy to play. The hold button gives you instant sustain, and by holding the shift key, you can access the "Chord" mode, letting you program in a chord and replay with just one finger.

THE FEATURES:

The rubberized shell protects MicroLab from and bumps and scrapes when you're on the move, and also features a recess that perfectly fits the USB cable, letting you store or pack it easily. MicroLab also includes capacitive mod and pitch controls that work in the same way that touchscreens do, these also let you swipe through and select presets with a tap. You can also quickly switch MIDI channels via the dedicated knob and numbered keys.

THE SHAPE:

Arturia have designed this controller to work with you, and not get in the way. Because the cable is recessed, you can push it right up against other gear in your studio without cables getting in the way. It's the width of the average plane and train tray table, and the shell stops it from sliding around. The keys are also recessed slightly into the body, nothing sticks out, so there's nothing to catch when you slip it into your backpack.

THE SOFTWARE:

MicroLab includes 3 great software titles for free:

- Analog Lab Lite - Explore 600 fantastic presets taken from Arturia's award-winning V Collection series. Analog and digital synths, classic organs and pianos.
- UVI Grand Piano Model D - A beautifully sampled Steinway for you to play using MicroLab's expressive, velocity-sensitive keys.

Bitwig Studio 8-Track - A powerful and innovative software studio to record, sequence, and mix your tracks. Make music right out of the box.
Read more
 More than 10 in stock $78.48
Click for better price!
quote 745086
Cat: 745778 Rel: 10 Sep 19 • View all Synth modules
 
Two independent voltage controlled switches in one module - 4HP
Notes: Module A-150-1 (Dual VCS) contains two separate voltage-controlled switches.

Each switch has a control voltage input, a common Out / Input, and two In / Outputs. The switches are bi-directional: they can work in both directions, so can connect one input to either of two outputs, or either of two inputs to one output. Voltages in the range -8V...+8V at the O/I resp. I/O sockets can be processed by the module.

Two LEDs show which in / output is active (i.e. which is connected to the common out / input).
Read more
 1 in stock $53.37
Click for better price!
quote 745778
Cat: 745781 Rel: 09 Sep 19 • View all Synth modules
 
Complex switch/multiplexer unit - 16HP
Notes: Module A152 is a very useful switching and T&H module. It combines a voltage addressed 1-to-8 multiplexer and 8 fold T&H that can be used as kind of an analogue shift register too. The active in/output is displayed by a LED. The digital output of the currently addressed step outputs "high". The remaining digital outputs are low.

Instead of voltage control even clock/reset controlled addressing of the active step is possible. The rising edge of each clock signal causes an advance to the next state. The rising edge of the reset signal resets to step 1.

The sum of the voltages coming from the manual Address control and the CV input define the currently addressed step of the 3 sub-devices. If the module is controlled by clock and reset the control voltage has to remain unchanged as the CV control has priority over the clock/reset control (e.g. simply turn the CV control fully counter-clockwise and do not touch the Address control knob).

Sub-device #1 is the bidirectional 8-fold multiplexer (kind of an electronical 8-fold rotary switch). Bidirectional means that it works into both directions like a mechanical rotary switch: the common socket may work as an output that is connected to one of the 8 inputs that are e.g. connected to modulation or audio sources. But the common socket may even function as input. In this case the signal applied to the common socket is output to the currently addressed single socket. The voltage range of the in/outputs to be switched is the full A-100 voltage range -12V....+12V. All A-100 signals can be switched without any restrictions.

Sub-device #2 is the addressed 8-fold T&H. The signal at the common T&H input is connected to the addressed T&H output. As soon as a new output is addressed the last voltage is stored at the output (Track&Hold function). The T&H section of the A-152 allows the emulation of the "toggling T&H" function of the Buchla module 266 "Source of Uncertainty". Only the first two T&H outputs of the A-152 are required for this application. This unit can be used also as kind of an analogue (shift) register. The difference to a "real" analogue shift register is that the sampled output voltages are not shifted to the next output but remain allocated to the same output. But in some cases (e.g. controlling the pitch of 3 VCOs by 3 output voltages of the A-152) the result is the same.

Sub-device #3 is the digital output section. The digital output of the currently addressed turns to "high". All other digital outputs are low. The digital outputs can be used to trigger e.g. envelope generators or to control the reset input in the clocked mode to reduce the number of addressed stages.
Read more
 1 in stock $137.08
Click for better price!
quote 745781
Cat: 732849 Rel: 10 Sep 19 • View all Synth modules
 
Compact & flexible looping AD/ASR envelope generator - 3HP
Notes: Erica Pico VC EG is versatile looping AD/ASR envelope generator with voltage control over attack and decay times. It has automatic Trigger/Gate detection, as well as "drone mode" - at full CW setting of the Decay knob, the envelope is full open. In the LOOP mode you can retrigger envelopes for even more interesting modulations.
Read more
 3 in stock $99.41
Click for better price!
quote 732849
Cat: 648928 Rel: 25 May 17 • View all Synth modules
 
Compact programmable clocked modulation source in Eurorack format - 8HP
Notes: 'Pamela's NEW Workout' is a compact programmable clocked modulation source for your Eurorack modular synthesiser system. It provides 8 highly editable outputs producing various control voltage signals correlated and synced to a BPM based master clock.

Building on the original 'Pamela's Workout', this new evolved model maintains the original's form factor and intuitive workflow but greatly improves on and adds many new features with upgraded hardware, a new OLED display and rewritten software.

Each output is now able to provide not just clocked triggers but also rhythmic waveforms with many parameters controllable directly and via assigning to external CV control. Pamela has grown beyond a clever clock and now provides almost limitless synced modulation possibilities.

Improvements have been made to overall clock stability and integration with external clocks and devices. Also new are dedicated MIDI and Din Sync clock outputs available via optional expander modules.
Read more
 9 in stock $228.11
Click for better price!
quote 648928
Cat: 747773 Rel: 12 Sep 19 • View all Keyboard stands
 
X-frame keyboard stand
Notes: X-braced keyboard stand with textured end caps to aid grip and prevent the keyboard sliding forwards. Pull and lock ball mechanism enables quick setup and secure multi-point positioning.

- Easy to reach pull and spring lock ball mechanism to adjust height
- Height adjustment from 170 - 970 mm
- Anti-slip feet
Read more
 2 in stock $25.10
Cat: 735296 Rel: 12 Sep 19 • View all Keyboard bags & covers
 
Convertible bag for transporting a KORG Monologue or notebook computer
Notes: This soft case for transporting the KORG Monologue features a convertible design that lets you change the position of the straps to use the case in two different ways: as a day pack carried on your back, or as a messenger-style shoulder bag. Internally, there is space to accommodate up to a 17-inch MacBook or a 15-inch Windows notebook computer. The bag is made of a neoprene material used in wetsuits. Lightweight, durable, and full of cushioning, the MP-MONOLOGUE will safely protect your valuable equipment.
Read more
 2 in stock $60.16
Click for better price!
quote 735296
FORTHCOMING
UDG Creator Universal Audio OX AMP Top Box Hardcase (black)
coming soon $83.70
Cat: 745083 Rel: 09 Sep 19 • View all MIDI keyboards
 
Smart, versatile controller with 25 high quality keys, travel-friendly features & powerful software included - blue & white edition
Notes: What's your favourite colour? Arturia's tiny keyboard comes in orange, blue or black. Highly portable two-octave design with MIDI over USB. We like the blue one.

Supplier notes:
A new controller keyboard from Music tech pioneers Arturia that excites both new users and experienced professionals alike. MicroLab is a small-scale MIDI keyboard with smart design features that you can take anywhere.

THE KEYS:

MicroLab features the same professional slim-keys as their industry standard KeyStep controller. The keybeds found on budget controllers are often not very inspiring, but the 25 expressive, velocity-sensitive keys on MicroLab are simply a joy to play. The hold button gives you instant sustain, and by holding the shift key, you can access the "Chord" mode, letting you program in a chord and replay with just one finger.

THE FEATURES:

The rubberized shell protects MicroLab from and bumps and scrapes when you're on the move, and also features a recess that perfectly fits the USB cable, letting you store or pack it easily. MicroLab also includes capacitive mod and pitch controls that work in the same way that touchscreens do, these also let you swipe through and select presets with a tap. You can also quickly switch MIDI channels via the dedicated knob and numbered keys.

THE SHAPE:

Arturia have designed this controller to work with you, and not get in the way. Because the cable is recessed, you can push it right up against other gear in your studio without cables getting in the way. It's the width of the average plane and train tray table, and the shell stops it from sliding around. The keys are also recessed slightly into the body, nothing sticks out, so there's nothing to catch when you slip it into your backpack.

THE SOFTWARE:

MicroLab includes 3 great software titles for free:

- Analog Lab Lite - Explore 600 fantastic presets taken from Arturia's award-winning V Collection series. Analog and digital synths, classic organs and pianos.
- UVI Grand Piano Model D - A beautifully sampled Steinway for you to play using MicroLab's expressive, velocity-sensitive keys.

Bitwig Studio 8-Track - A powerful and innovative software studio to record, sequence, and mix your tracks. Make music right out of the box.
Read more
 9 in stock $80.99
Click for better price!
quote 745083
Cat: 745794 Rel: 10 Sep 19 • View all Synth modules
 
3-way logic module featuring two internal signal inverters - 8HP
Notes: Dual logic module with 3 inputs for each unit. The logical states of the inputs ("1" = high / "0" = low) are linked together in 3 ways: AND, OR, EXOR (exclusive OR). The three functions are available simultaneously at three outputs with LED display of the output states.

Additionally, two inverters are available to obtain the inverted functions NAND, NOR and NEXOR. The sockets of each triple unit are "normalized", i.e. the switched contact of socket 2 is connected to input 1 and the switched contact of socket 3 is connected to input 2. Provided that no plug is inserted into socket 1 resp. socket 2 the socket is connected to the input above it. This simplifies the usage of the module when only 2 signals are combined, e.g. the logic functions AND and OR have different neutral input levels ("1" is the neutral state for AND, "0" is the neutral state for OR).

In case of a fixed input level for the unused input one of the functions (AND or OR) would work no longer.

Applications: combination of digital signals of the A-100 (e.g. gates, clocks, triggers), e.g. to obtain "gated" clocks or certain rhythmic patterns.
Read more
 1 in stock $104.63
Click for better price!
quote 745794
Cat: 745792 Rel: 10 Sep 19 • View all Synth modules
 
Dual trigger modifier, consisting of two trigger inverters for gate, clock or trigger signals - 4HP
Notes: Module A-165 (Dual Trigger Modifier) contains two separate trigger modifiers, to use with logical/digital levels (gate, clock, trigger). Each half of the module enables signals generated by the A-100 to communicate with other instruments (such as an external sequencer) or is simply used where you want to reverse a trigger polarity.

Whatever signal is patched into the input, inverted by the module, and fed out of the Inv. Out (inverted output) socket. At the same time, a trigger signal of roughly 50 ms is generated every time an edge of the trigger pulse is sensed (negative as well as positive). This trigger signal is available at the +/- output.

Two LEDs act as indicators showing the level of signal available at the two outputs.

When both units are daisy-chained the module can be used as level shifter for gate/trigger/clock signals (from min. +2,5V up to +12V)
Read more
 1 in stock $58.60
Click for better price!
quote 745792
Cat: 577765 Rel: 10 Sep 19 • View all Synth modules
 
Frequency divider for clock, trigger & gate signals - 4HP
Notes: Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, e.g. an LFO, MIDI sync, or the gate from a MIDI-CV interface.

At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. The low/high levels of the output signals are 0V and about +10V.

The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.

The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length of from one to eight events.
Read more
 1 in stock $69.05
Click for better price!
quote 577765
Cat: 577759 Rel: 10 Sep 19 • View all Synth modules
 
Additional 4HP module for the A-160
Notes: Module A-161 is an eight-step Clock Sequencer which is internally connected to the Clock Divider (A-160). Eight outputs are sequentially switched by the clock signals from the A-160 (see Fig. 1) and can act, for instance, as sequential rhythmic triggers for an envelope. The reset on the A-160 also works on the A-161 (instant return to Step 1). The low/high levels of the output signals are 0V and about +10V. In combination with a mixer (A-138) short analogue sequences can be generated. Our MIDI-Analog-Sequencer MAQ16/3 is suitable for MIDI-controlled analogue sequences up to 48 steps. A "real" analogue sequencer with 8 steps is the A-155.
Read more
 1 in stock $61.73
Click for better price!
quote 577759
Cat: 745784 Rel: 09 Sep 19 • View all Synth modules
 
Analogue sequencer for CV's & trigger/gates
Notes: The Doepfer A-155 has two CV rows, each with selectable voltage range, glide and sample & hold options. Three trigger rows and a one gate row. Logic inputs for clock, reset, start and stop. It's even possible to insert external signals per step instead, overriding the CV generated by the 2nd row's potentiometer. The A-155's functions can be expanded by the A-154 Sequencer Controller, as it's an entire control unit with step number limitation, voltage controllable clock generator, variable gate length and a number of playback modes.

Features of the analogue rows (knobs):

- 8 potentiometers (knobs)
- Lower row: Scale (knob), voltage output range 0 ... ~ +6,5V
- Upper row: 1V/2V/4V (octave range switch for exact VCO control), voltage output ranges 0 ...1.0V / 0 ...2.0V / 0 ...4.0V
- Glide time (knob), same as portamento or slew limiter
- Glide Control (control input for switching glide on/off)
- S&H Control (control input for internal S&H, works like A-148)
- Pre Glide/S&H-Out (analogue output before S&H and glide unit, especially required when external audio signals are used as inputs of the lower row)
- Post Glide/S&H-Out (analogue output after S&H and glide unit)
- Lower row: external inputs for the 8 steps (switched jack sockets), control signals or audio signals may be used as inputs (allowed voltage range -5V...+12V), the knobs of the lower row are working in this case as attenuators

Features of the trigger rows (switches):

- 4 Trigger/Gate tracks with 2 rows of switches
- Toggle switches of 1-0-1 type (with middle position), which can be used to send a trigger/gate to the track above or below or to send no trigger/gate (middle position)
- 3 trigger rows (i.e. short pulse for each step set, pulse width corresponds to the pulse width of the clock/step input signal)
- 1 gate row (i.e. a high signal is applied during the length of the step set)

Control inputs and buttons:

- Step (defines the tempo of the sequence, same as clock or trigger input)
- Reset (resets all rows to step 1)
- Start (starts the sequence at the momentary position)
- Stop (stops the sequence at the momentary position)

Step and Reset are compatible to the MIDI interface A-190, i.e. in combination with the A-190 the A-155 may be synchronized via MIDI. The quantizing module A-156 can be used to quantize the infinite analogue voltages coming from A-155 into discrete semitone steps (multiples of 1/12V). Without MIDI interface e.g. a LFO rectangle output can be used to define the tempo of the sequence.

The sequencer controller A-154 adds a lot of new functions to the A-155 (e.g. voltage controlled addressing, forward/backward/pendulum/random mode, voltage control of first and last step, voltage controlled clock and gate length, step skipping, combination of several A-155 in parallel/serial mode and many more).
Read more
 1 in stock $308.68
Cat: 745786 Rel: 09 Sep 19 • View all Synth modules
 
52HP 8-channel, 16-step-button Eurorack step sequencer with breakout modules
Notes: A-157 is a trigger sequencer subsystem that generates eight trigger signals controlled by a 8x16 LED/button matrix (some customers call it "Miniature Schaltwerk" as it is based on the same matrix as the no longer available Schaltwerk).
The subsystem contains three modules:

A-157-1: 8 x 16 LED/button matrix and function addressing buttons/LEDs
A-157-2: Trigger Output module
A-157-3: Control Inputs module

The LED/button matrix module A-157-1 is the core of the subsystem. It is used to set or reset the trigger event on each of the 16 steps of each of the 8 rows. In addition the buttons and LEDs of the matrix are used for other functions too (like setting the first and last step of each row or addressing the preset memory).

The Trigger Output module A-157-2 outputs the 8 trigger signals and has an LED display for each trigger available.

The Control Inputs module A-157-3 has manual controls and trigger inputs available for the basic control functions start, stop, reset and clock. In addition four functions inputs are available which will be used in future firmware versions to assign these inputs to special functions (e.g. shifting a row left or right by means of an external gate/trigger signal or a second set of start, stop, reset and clock for individual rows).
Read more
 1 in stock $490.77
Click for better price!
quote 745786
Cat: 745787 Rel: 10 Sep 19 • View all Synth modules
 
Voltage-controlled clock multiplier with CV or manual control - 4HP
Notes: Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock signal is available at the socket Clock Out. According to the position of the Mode switch different clock multiplying factors are assigned to the control voltage. With 0V CV no clock output is generated. This state is indicated by "all LEDs off". With increasing CV integer factors (left position of the mode switch), power of two factors (middle position) or a mix of both (right position) are obtained. Nine LEDs are used to show the currently selected multiplying factor. In addition two LEDs are used to display the incoming and outgoing clock signal.

A manual control is used to adjust the clock multiplication factor manually without the need of an external control voltage. The voltage generated by this control ("Manual") is normalled to the CV In socket. As long as no plug is inserted into the CV In socket the clock multiplication factor is adjusted by means of the manual control knob and displayed by the LEDs. For dynamic applications (like the ratcheting function described below) the manually generated CV is overwritten by the external CV which has to be fed into the CV In socket.

The module can be used for all kind of clock multiplying applications. One important example is the generation of so-called ratcheting sequences. The band Tangerine Dream is famous for this kind of sequences. A normal sequencer generates only one gate signal per step. A ratcheting sequence may have also more than one gate pulses per step. This function can be obtained by using the A-160-5: one CV output of the sequencer is used to define the number of gate pulses per step. If the control of the step in question is fully CCW the generated CV is 0V and no gate signal is generated (mute of the step). When the control of the step in question is turned clockwise one, two or more gate pulses are generated depending upon the position of the mode switch and the voltage generated by the CV at this step.

Technical note: Due to the nature of clock multiplying it takes a few input clock pulses until the clock output is stable. One has to average a few input clock pulses to generate the multiplied clock output signal. Even when the input clock frequency changes it will take a few cycles until the output clock signal is correct as the module cannot foresee the future of the clock input signal. The generated clock output signal is derived from the last few cycles of the clock input signal. Consequently the module should be driven only by a clock signal with constant or slowly changing frequency.
Read more
 1 in stock $102.54
Click for better price!
quote 745787
Cat: 577757 Rel: 10 Sep 19 • View all Synth modules
 
Dual quantizer for CV's, converting a continuous positive input voltage into a stepped output voltage - 8HP
Notes: Module A-156 is a Dual Control Voltage Quantizer. A quantizer converts a continuous control voltage in the range 0...+10V into a stepped output voltage in the same voltage range (i.e. only certain voltages occur). Normally 1/12 V steps are used to obtain semitone steps. Quantizer 2 of the A-156 allows has more sophisticated quantizing modes like major scale (i.e. only voltages corresponding to the major scale), minor scale, major chord, minor chord, fundamental + fifth and addition of seventh or sixth when chords are selected. Only those voltages appear at the CV output which comply with the selection rule (e.g. minor chord with seventh). The mode setting of quantizer 2 is done with 3 switches (1-0-1 type with middle position). From the factory quantizer 1 is working in the semitone mode. But there is a jumper on the pc board that can be changed so that even quantizer 1 uses the same scale as quantizer 2.

For each quantizer the following in/outputs are available:

- Control voltage input (CV In): The input for the continuous voltage to be quantized
- Control voltage output (CV Out): The output of the quantized voltage
- Trigger input (Trig.In): If this jack is left open the quantizer is working permanently. If a rectangle voltage is applied quantisation happens only at the rising edge of the signal (e.g. from an LFO or MIDI-to-Sync interface). Thus the quantizing can be synchronized with other events
- Trigger output (Trig.Out): Whenever a quantisation happens (i.e. a new voltage is generated at the CV Out) a positive pulse occurs at this output. It may be used to trigger an envelope generator (ADSR) or for triggering other modules (sequential switch A-151, trigger divider/sequencer A-160/161, trigger delay A-162, ...). If none of these functions are used the jack is left open

On top of that the A-156 is provided with a common transpose CV input having an additive effect on both quantizers. This input is quantized in semitone steps. A typical application is the transposition of a sequence generated by the A-155 by a second control voltage (e.g. coming from the MIDI-CV interface A-190).

Typical applications:

- Quantizing the CV sequence generated by an A-155 (semitone, only major scale, only minor scale and so on)
- Quantizing the voltage coming from the Trautonium Manual / Ribbon Controller A-198, Theremin A-178 or Light-to-CV module A-179 to get accurate semitones or major/minor scale tones
- Arpeggio-like effects with LFO, random, noise, envelope generators as CV sources (for negative or symmetrical voltages an offset must be added, e.g. with the offset/attenuator module A-129-3, to obtain positive voltages for the A-156 input)
Read more
 1 in stock $124.51
Click for better price!
quote 577757
Cat: 745796 Rel: 10 Sep 19 • View all Synth modules
 
Pulse-width generator - 4HP
Notes: Module A-168-1 is a pulsewidth modulation generator (PWM Module). It derives a rectangle signal with adjustable pulsewidth from an external triangle, sawtooth or sine wave. The external signal can be an LFO, VCO or any other signal with falling/rising slopes (e.g. ADSR). In addition, the pulsewidth can be modulated by a CV signal (e.g. LFO or ADSR). The typical application is the generation of a rectangle signal with PWM from VCOs or LFOs which do not yet have this feature (e.g. A-110-4, A-145, A-147-2, A-143-4, A-143-9).

The module is equipped with these controls and in/output:

- Manual PW control (PW)
- PWM CV Input with attenuator (PWM)
- Signal input (In)
- Output with LED control (Out)
- Inverted Output with LED control (/Out)
- Internal trimming potentiometer for PW (is adjusted for symmetrical 50:50 rectangle when the manual PW control is at centre position)
- Internal trimming potentiometer for PWM range (is adjusted so that the manual PW control covers the full PW range 0 ... 100%)
- The trimming potentiometers are required to adjust the module for best operation for signals with different DC offsets (e.g. unipolar/bipolar signals) and different signal levels
- Normally the module is assigned to another module because the trimming potentiometer have to be readjusted when the input signal changes (unless the signals have nearly the same DC offset and level)
Read more
 1 in stock $58.60
Click for better price!
quote 745796
Cat: 745785 Rel: 10 Sep 19 • View all Synth modules
 
Dual quantizer for CV's, converting a continuous positive input voltage into a stepped output voltage - 8HP
Notes: Module A-156 is a Dual Control Voltage Quantizer. A quantizer converts a continuous control voltage in the range 0...+10V into a stepped output voltage in the same voltage range (i.e. only certain voltages occur). Normally 1/12 V steps are used to obtain semitone steps. Quantizer 2 of the A-156 allows has more sophisticated quantizing modes like major scale (i.e. only voltages corresponding to the major scale), minor scale, major chord, minor chord, fundamental + fifth and addition of seventh or sixth when chords are selected. Only those voltages appear at the CV output which comply with the selection rule (e.g. minor chord with seventh). The mode setting of quantizer 2 is done with 3 switches (1-0-1 type with middle position). From the factory quantizer 1 is working in the semitone mode. But there is a jumper on the pc board that can be changed so that even quantizer 1 uses the same scale as quantizer 2.

For each quantizer the following in/outputs are available:

- Control voltage input (CV In): The input for the continuous voltage to be quantized
- Control voltage output (CV Out): The output of the quantized voltage
- Trigger input (Trig.In): If this jack is left open the quantizer is working permanently. If a rectangle voltage is applied quantisation happens only at the rising edge of the signal (e.g. from an LFO or MIDI-to-Sync interface). Thus the quantizing can be synchronized with other events
- Trigger output (Trig.Out): Whenever a quantisation happens (i.e. a new voltage is generated at the CV Out) a positive pulse occurs at this output. It may be used to trigger an envelope generator (ADSR) or for triggering other modules (sequential switch A-151, trigger divider/sequencer A-160/161, trigger delay A-162, ...). If none of these functions are used the jack is left open

On top of that the A-156 is provided with a common transpose CV input having an additive effect on both quantizers. This input is quantized in semitone steps. A typical application is the transposition of a sequence generated by the A-155 by a second control voltage (e.g. coming from the MIDI-CV interface A-190).

Typical applications:

- Quantizing the CV sequence generated by an A-155 (semitone, only major scale, only minor scale and so on)
- Quantizing the voltage coming from the Trautonium Manual / Ribbon Controller A-198, Theremin A-178 or Light-to-CV module A-179 to get accurate semitones or major/minor scale tones
- Arpeggio-like effects with LFO, random, noise, envelope generators as CV sources (for negative or symmetrical voltages an offset must be added, e.g. with the offset/attenuator module A-129-3, to obtain positive voltages for the A-156 input)
Read more
 1 in stock $113.00
Cat: 745782 Rel: 09 Sep 19 • View all Synth modules
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step addressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analogue CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analogue outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be connected to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.
Read more
 1 in stock $171.61
Click for better price!
quote 745782
Cat: 745783 Rel: 09 Sep 19 • View all Synth modules
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step adressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analog CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analog outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be conneted to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.

The functions of the Start/Stop/Step/Reset buttons and inputs are the same as for the "old" control unit of the A-155:

A high level at the Start input or operating the Start button starts the sequence from the momentarily addressed step. Not working in "CV controlled step address" mode.

A high level at the Stop input or operating the Stop button stops the sequence (the last active step remains addressed). Not working in "CV controlled step address" mode.
Read more
 1 in stock $158.00
Cat: 745775 Rel: 10 Sep 19 • View all Synth modules
 
Two sample & hold units in one module for generating stepped random voltages or slicing signals
Notes: Module A-148 (Dual S&H) has two identical sample & hold modules, designed to produce 'staircase' voltages. The signal present at the sample input is sampled at a rate set by the signal at the trigger input, and held at that voltage at the S&H output.

The exact shape of the staircase depends on the sort of waveform at the sample input: NOISE or RANDOM signals produce random patterns; an LFO produces rising or falling staircase patterns.

Two LEDs for each S&H indicate the voltage (positive or negative) of the sampled signal.
Read more
 1 in stock $66.97
Click for better price!
quote 745775
Cat: 745789 Rel: 10 Sep 19 • View all Synth modules
 
Voltage-controlled clock multiplier with CV or manual control - 4HP
Notes: Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock signal is available at the socket Clock Out. According to the position of the Mode switch different clock multiplying factors are assigned to the control voltage. With 0V CV no clock output is generated. This state is indicated by "all LEDs off". With increasing CV integer factors (left position of the mode switch), power of two factors (middle position) or a mix of both (right position) are obtained. Nine LEDs are used to show the currently selected multiplying factor. In addition two LEDs are used to display the incoming and outgoing clock signal.

A manual control is used to adjust the clock multiplication factor manually without the need of an external control voltage. The voltage generated by this control ("Manual") is normalled to the CV In socket. As long as no plug is inserted into the CV In socket the clock multiplication factor is adjusted by means of the manual control knob and displayed by the LEDs. For dynamic applications (like the ratcheting function described below) the manually generated CV is overwritten by the external CV which has to be fed into the CV In socket.

The module can be used for all kind of clock multiplying applications. One important example is the generation of so-called ratcheting sequences. The band Tangerine Dream is famous for this kind of sequences. A normal sequencer generates only one gate signal per step. A ratcheting sequence may have also more than one gate pulses per step. This function can be obtained by using the A-160-5: one CV output of the sequencer is used to define the number of gate pulses per step. If the control of the step in question is fully CCW the generated CV is 0V and no gate signal is generated (mute of the step). When the control of the step in question is turned clockwise one, two or more gate pulses are generated depending upon the position of the mode switch and the voltage generated by the CV at this step.

Technical note: Due to the nature of clock multiplying it takes a few input clock pulses until the clock output is stable. One has to average a few input clock pulses to generate the multiplied clock output signal. Even when the input clock frequency changes it will take a few cycles until the output clock signal is correct as the module cannot foresee the future of the clock input signal. The generated clock output signal is derived from the last few cycles of the clock input signal. Consequently the module should be driven only by a clock signal with constant or slowly changing frequency.
Read more
 1 in stock $99.40
Click for better price!
quote 745789
Cat: 743797 Rel: 12 Sep 19 • View all MIDI keyboards
 
37 mini-key universal keyboard controller
Notes: iRig Keys 2 gives you more ways to connect & control all of your gear, in any situation. With improved compatibility for the latest mobile devices, full MIDI input and output, multiple power options, a stocked software bundle and a stylish new look, this new and improved controller is ready to play when you are.

iRig Keys 2 is a 37-key (3 octave) USB/MIDI keyboard controller with velocity-sensitive keys that connects to all of your devices: iPhone, iPad, Android and Mac/PC as well as any other MIDI compatible device. Packed into an ultra-compact size, it's the perfect way to unleash your creativity on the go.

Control more:
iRig Keys 2 adds MIDI input and output so you can control stand-alone gear like UNO Synth and other analogue synthesizers, UNO Drum and other drum machines, and more. When connected to a computer or mobile device, it acts as a MIDI interface for all your gear, streamlining your rig into one compact unit.

You can run iRig Keys 2 off your computer or mobile device, USB power supply or even USB battery packs, so it's perfect for on-the-go rigs.

Be heard:
Never worry about compatibility issues again. iRig Keys 2 works right out of the box with iPhone, iPad and Mac/PC, plus it's compatible with most Android devices*, even the latest models. A new headphone output lets you connect speakers or headphones, so you're never stuck using your device's built-in speakers.

Whether you want to practice silently or blast through a sound system, iRig Keys 2 has you covered.

Limitless potential:
Best of all, iRig Keys 2 works with hundreds of popular music apps for iPhone, iPad, Android and Mac/PC.

Whether you want to learn to play, practice your chops, compose a song or perform live, and more, there's a never-ending stream of apps waiting to fuel your inspiration.

Convenient control:
iRig Keys 2 hosts a number of useful controls - from modulation and pitch bend wheels, a volume output control, octave up/down buttons, program up/down buttons, a set button, an ALT button, and a data push encoder.

Where to next:
iRig Keys 2 is designed for portability, so it can travel anywhere you do. It's smaller than other 37-key keyboards on the market, and runs off your device, a USB wall charger or USB battery pack, meaning there's no bounds to your creativity. Head outside, get inspired in your hotel room, practice in the classroom - no matter where your musical journey takes you, iRig Keys 2 will be along for the ride.

Cutting-edge software bundle:
iRig Keys 2 includes IK's award-winning Mac/PC sound & groove workstation, SampleTank 4 SE, giving you over 2000 sounds to create cutting-edge tracks right out of the box.

It also unlocks free apps like SampleTank FREE for iPhone iPad, iGrand Piano FREE for iPhone, iPad and Android, and iLectric Piano FREE for Android.
Read more
 More than 10 in stock $129.75
Click for better price!
quote 743797
Samson HS5 P3 Headset Microphone (headset microphone)
Cat: 675539 Rel: 10 Sep 19 • View all Headworn microphones
 
Headset microphone with P3 3-pin connection for wireless bodypack transmitters
Notes: The Samson HS5 headset microphone features an adjustable band and terminates to a P3 connection for use with compatible Samson transmitters. The HS5 is ideal for capturing speech for presentations, aerobics instruction and more.
Read more
 1 in stock $37.66
Cat: 743796 Rel: 12 Sep 19 • View all MIDI keyboards
 
37 key universal keyboard controller
Notes: 37-key version of IK's portable keyboard offering, cramming three octaves of velocity-sensitive keys into a neat and compact little package.

Supplier notes:
iRig Keys 2 gives you more ways to connect & control all of your gear, in any situation. With improved compatibility for the latest mobile devices, full MIDI input and output, multiple power options, a stocked software bundle and a stylish new look, this new and improved controller is ready to play when you are.

iRig Keys 2 is a 37-key (3 octave) USB/MIDI keyboard controller with velocity-sensitive keys that connects to all of your devices: iPhone, iPad, Android and Mac/PC as well as any other MIDI compatible device. Packed into an ultra-compact size, it's the perfect way to unleash your creativity on the go.

Control more:
iRig Keys 2 adds MIDI input and output so you can control stand-alone gear like UNO Synth and other analogue synthesizers, UNO Drum and other drum machines, and more. When connected to a computer or mobile device, it acts as a MIDI interface for all your gear, streamlining your rig into one compact unit.

You can run iRig Keys 2 off your computer or mobile device, USB power supply or even USB battery packs, so it's perfect for on-the-go rigs.

Be heard:
Never worry about compatibility issues again. iRig Keys 2 works right out of the box with iPhone, iPad and Mac/PC, plus it's compatible with most Android devices*, even the latest models. A new headphone output lets you connect speakers or headphones, so you're never stuck using your device's built-in speakers.

Whether you want to practice silently or blast through a sound system, iRig Keys 2 has you covered.

Limitless potential:
Best of all, iRig Keys 2 works with hundreds of popular music apps for iPhone, iPad, Android and Mac/PC.

Whether you want to learn to play, practice your chops, compose a song or perform live, and more, there's a never-ending stream of apps waiting to fuel your inspiration.

Convenient control:
iRig Keys 2 hosts a number of useful controls - from modulation and pitch bend wheels, a volume output control, octave up/down buttons, program up/down buttons, a set button, an ALT button, and a data push encoder.

Where to next:
iRig Keys 2 is designed for portability, so it can travel anywhere you do. It's smaller than other 37-key keyboards on the market, and runs off your device, a USB wall charger or USB battery pack, meaning there's no bounds to your creativity. Head outside, get inspired in your hotel room, practice in the classroom - no matter where your musical journey takes you, iRig Keys 2 will be along for the ride.

Cutting-edge software bundle:
iRig Keys 2 includes IK's award-winning Mac/PC sound & groove workstation, SampleTank 4 SE, giving you over 2000 sounds to create cutting-edge tracks right out of the box.

It also unlocks free apps like SampleTank FREE for iPhone iPad, iGrand Piano FREE for iPhone, iPad and Android, and iLectric Piano FREE for Android.
Read more
 More than 10 in stock $145.44
Click for better price!
quote 743796
Cat: 742136 Rel: 10 Sep 19 • View all Synth modules
 
Buffered precision multiple - 4HP
Notes: Erica Synths Black Multi is highly accurate active buffered 2x1to3 or 1to6 multiple that will work for signal splitting in any circuit, including driving several VCOs in tune from one CV source. "Octave" or +/- 1V offset switches on both channels allow to add or subtract one volt form each channel thus transposing VCOs one octave up or down. Hidden feature - custom offset - allows to set user defined offset on the first channel.
Read more
 3 in stock $86.84
Click for better price!
quote 742136
Cat: 732855 Rel: 10 Sep 19 • View all Synth modules
 
Expanded version of the popular Yocto (808) cowbell
Notes: Latvian modular specialists Erica take on the 808 cowbell. Based on the classic sound, reinvented for Eurorack with tune and decay controls plus tuning CV and accent inputs.

Supplier notes:
Erica Synths Cowbell module is an extended, modular version of Yocto (808) cowbell. For more sonic versatility we have added Tune and Decay controls, as well as Tune CV with an attenuator for nice vibratos. The module is developed in collaboration with a French company e-licktronic.
Read more
 4 in stock $113.01
Click for better price!
quote 732855
Cat: 746914 Rel: 11 Sep 19 • View all Handheld recorders
 
Four-track audio recording for music, film, podcasting & beyond
Notes: The H4n Pro isn't just improved, it's superior in every way. With advanced X/Y microphones, incredibly natural-sounding preamps, and a super-low noise floor, you can record everything from the Indy 500 to the fluttering of a hummingbird with extraordinary realism.

Welcome to the new gold standard in field recording.

The Filmmaker's Favourite:
The H4n Pro is packed with features that make it perfect for capturing audio for film. The onboard X/Y microphones deliver spectacular stereo imaging, and two combo input jacks allow you to use your favourite microphones as well. It also includes a headphone/line out jack to easily send high-definition stereo directly to your camera.

Unmatched In Concert:
The Pro is perfect for capturing live performances. Capable of handling up to 140 dB SPL, it can record everything from ear-splitting heavy metal to bass-heavy EDM. Take a line-level stereo feed from your mixing console and capture room ambience with the X/Y microphones to put your listeners front row centre.

Podcasters and Journalists:
The H4n Pro provides the essential combination of mic'ing versatility, portability, and superior audio necessary for impactful storytelling. With support for plug-in power, you can use a lavalier to mic up your subject for podcasts or interviews. Record time-stamped WAV files to sync with video footage in post-production, or embed superior audio directly on your video in real-time through a 1/8" stereo feed.

Mobile Studio:
With overdubbing and punch-in features, as well as studio-grade instrument effects and emulators, you can create songs from start to finish. The Pro also functions as a 2-input/2-output USB audio interface for PC or Mac. Launch your favourite recording/editing software or use the included Cubase LE to start creating.

High-Performance Mic Preamps:
The Pro features the same high performance, low-noise mic preamps as our acclaimed Zoom H5 and H6 Handy Recorders, with recording and playback at resolutions up to 24-bit/96 kHz. The improved noise floor (-120 dBu EIN) captures audio at lower volumes with less noise and fewer artefacts.

Built-in Stereo Recording:
X/Y stereo recording covers a wide area while capturing sound sources in the centre with clarity and definition. The angle of its two unidirectional condenser mics can easily be changed from 90 degrees for a tightly focused stereo image to 120 degrees for a wider image simply by twisting the mic capsules.

The H4n Pro provides an onboard MS decoder for Mid-Side recording with external microphones. This allows you to adjust the width of the stereo image, making it especially useful for sound design and broadcasting.

Inputs:
The two locking combo connectors accept either XLR or 1/4" balanced/unbalanced phone cables, handling mic- and line-level signals as well as instrument-level signals. Phantom Power of +24 or +48 volts can be applied to both inputs. Plus, there's a stereo 1/8" Mic jack for external audio sources, including lavalier microphones requiring 2.5 volts of plug-in power.

Outputs:
A stereo 1/8" Line/Phone Out, with dedicated volume control, allows for headphone monitoring or connection to your DSLR, while the built-in monophonic speaker allows for quick playback reference. In addition, a USB port enables fast file transfer, firmware updates, and use as a 2-in/2-out audio interface for computers.

Form Factor:
A new rubberized, ergonomic body is perfect for use in the field or with a camera, while new locking XLR/TRS connectors ensure your mic cables stay secure. Highly portable, the H4n Pro can travel anywhere for convenient mobile recording.

What's included with the H4n Pro:

- H4n Pro Handy Recorder
- Protective case
- 2 x AA batteries
- Operation manual
- Download license for Steinberg Cubase LE and WaveLab LE software
Read more
 2 in stock $249.04
Click for better price!
quote 746914
Cat: 732315 Rel: 11 Sep 19 • View all Synth modules
 
MIDI-CV converter module for Eurorack - 14HP
Notes: Eight-voice modular synthesis? Yes please. Updated version of the Poly splits your MIDI signal to CV and gate for fully polyphonic action. Chain multiple units for even more multi-voice madness.

Supplier notes:
The Polyend Poly 2 module is a polyphonic MIDI to CV converter Eurorack module, and it will change how you interact with your sequencers, controllers, DAW, and more. This powerful module features MIDI I/O plus USB A and USB B inputs, with a total of four Gate outputs, four Pitch outputs, and 12 outs for CV (CC 0-127) signals. And using the Smart Thru connection, you can daisy-chain multiple Poly 2 modules together for even more voices. And Sweetwater was excited to report that Poly 2 is even compatible with the MPE (Multidimensional Polyphonic Expression) standard used in innovative controllers such as the Roger Linn Design LinnStrument and the ROLI Seaboard series. Once you've explored the polyphonic expression the Polyend Poly 2 module is capable of, you'll never want to be without it.

No matter what kind of MIDI controller you use - keyboard, ribbon controller, pressure pad, or whatever - the Poly 2 module offers built-in scale filtering rewards you with highly musical output. Select a scale, and only the notes within that scale will be passed along to your patch destinations. This is different from scale quantization, which forces ANY input to trigger the note its closest to in the scale, and can make it much more enjoyable to use alternative MIDI controllers with the Poly 2 module.
Read more
 More than 10 in stock $399.72
Click for better price!
quote 732315
Polyend Anywhere Powerbank Module (power supply module)
Cat: 732313 Rel: 11 Sep 19 • View all Synth modules
 
Portable power source interface for Eurorack
Notes: Release your mind and release your modular system, with the Polyend Anywhere power compatibility Eurorack module. The Polyend Anywhere hooks up to any Power Bank battery to allow the user the liberty of portability with their modular system. Take your system for a walk! Smell the flowers, and use the inspiration to create the simultaneous feedback/AM/FM patch you've been dreaming of!
Read more
 5 in stock $173.69
Click for better price!
quote 732313
Polyend Preset Module (synth module)
Cat: 732317 Rel: 11 Sep 19 • View all Synth modules
 
Macro controller & sequencer - 22HP
Notes: Presets on a modular? Sacrilege! Or the best of both worlds, depending how you look at it. We'll probably go with the latter, because this is a super versatile little programmer/sequencer/preset storage module.

Supplier notes:
The 22 HP interface is simple, clean and streamlined. At first glance, Polyend Preset module might look like simple a digital preset manager for Eurorack systems, but it's much more than this. Its vast implications make it a very smart companion for your modular system. But let's start from the basics. With the use of 9 LED coloured clickable encoders, Preset allows you to store up to 9 different CV output values in 32 banks of 32 presets. Yep, 1024 in total!

It's capable:

Program the notes sequences using one of the 32 build-in musical scales. Record the automation using the encoders or external source.

Four modes, totally different possibilities:

Depending on what you want to achieve, there are four modes you can choose from: First, Next, Channel and Note.

Both First and Next modes are perfect for building your unique polyphonic synthesizer.

The Channel mode lets you choose which MIDI Channel is responsible for which voice. This mode is what the majority of users utilise to connect DAWs or external sequencers.

The Note mode translates data received from MIDI Notes C through G and directs them into the corresponding voices (no matter the octave). This scenario works excellent for triggering drums from drum pads or drum triggers.
Read more
 More than 10 in stock $434.25
Click for better price!
quote 732317
FORTHCOMING
NUX NOD1 Horseman Overdrive Pedal
coming soon $52.31
FORTHCOMING
NUX NSS3 Mini Studio Pedal
coming soon $68.01
FORTHCOMING
NUX NCP2 Sculpture Compressor Pedal
coming soon $41.85
NUX
Cat: 747753 Rel: 12 Sep 19 • View all Wireless microphones
 
Wireless snap-on transmission system
Notes: The NUX B-3 is a solidly 2.4GHz wireless snap-on microphone system designed for those who want to get rid of the cables and enjoy the wireless world without any complicated set-up. Channel 1 is the default pairing channel but if you want to use different channels for any reason, just press the channel switch on both the transmitter and the receiver to make sure both units are in the same channel. RF LEDs will turn blue when paired.

In the box:

- B-3 transmitter (XLRF)
- B-3 receiver (XLRM)
- USB A to dual micro B charging lead
- Hot-shoe mount for receiver
- XLR to 3.5mm camera input lead
Read more
 1 in stock $123.47
FORTHCOMING
NUX NOD3 Morning Star Overdrive Pedal
coming soon $41.85
FORTHCOMING
NUX Mighty 20 BT Guitar Amp
coming soon $130.79
FORTHCOMING
NUX Mighty 8 BT Guitar Amp
coming soon $94.17
FORTHCOMING
NUX JTC Drum & Loop Pro Dual Pedal
coming soon $125.56
FORTHCOMING
NUX Metal Core Deluxe Distortion Pedal
coming soon TBA
FORTHCOMING
NUX Drive Core Deluxe Boost & Drive Pedal
coming soon TBA
FORTHCOMING
NUX Tape Core Deluxe Tape Echo Pedal
coming soon TBA
FORTHCOMING
NUX NTU2 HD Pitch Tuner Pedal
coming soon $47.08
Cat: 744063 Rel: 12 Sep 19 • View all Synth modules
 
CEM3340 based VCO - 10HP
Notes: CEMosc is here, a stable AS3340 based VCO which tracks beautifully, and is feature rich. Easy to build and calibrate too.

CEMosc features:

- Onboard voltage regulation for tuning and tracking stability
- A rotary octave switch as well as a fine tune knob
- Both manual PW as well as PWM are available
- Linear and Exponential FM inputs, each with attenuators
- Both soft and hard sync
- Sawtooth, Triangle and Pulse outputs
Read more
 1 in stock $186.25
Click for better price!
quote 744063
Cat: 744064 Rel: 12 Sep 19 • View all Synth modules
 
Digital wavetable oscillator - 16HP
Notes: Klang Stadt is the latest FC iteration of Electric Druid's VCDO digital wavetable oscillator. It features a number of advantages over the previous Waverider design:

- Improved PWM filtering
- Addition of Sub Two output
- Addition of Klang output
- Addition of Xmod feature
- Onboard LFO for riding the waves
Read more
 2 in stock $221.83
Click for better price!
quote 744064
Notes: Unique, vintage reverb sound.

The SPRINGREVERB module brings the unique sound of this quite old (introduced in the 60's) technique for creating reverbs to the AE modular.

IMPORTANT NOTE: This is only the module without spring tank and connection cable; with this module alone, you get no reverb. This is for users who want to use their own spring tanks.
Read more
 1 in stock $39.75
Cat: 719720 Rel: 12 Sep 19 • View all MIDI cables & adapters
 
MIDI breakout cable for AE modular
Notes: The MIDI Breakout Cable is an adapter from the "classic" DIN-5 MIDI Socket to a stereo 3.5mm minijack plug, which is used as MIDI in on AE modular.
Read more
 1 in stock $5.76
Items 1 to 50 of 2,720 on page 1 of 55
1  2  3  ...  55  »

Filter

Saved Searches
Save current search
Release Date
Close