Search dance music

Notes: Uni is a triple attenuverter utility module designed to give cases gigantic macro control knobs.

Inputs:

CV inputs 1 and 3 - CV input for bidirectional attenuation. When input cables aren't plugged into these jacks, 5v reference signals will be used.
CV input 2 - CV input for either unidirectional or bidirectional attenuation. When an input cable isn't plugged into this jack, a 5v reference signal will be used.
Switch - toggles CV input 2 between unidirectional and bidirectional attenuation.

Outputs:

CV outputs 1, 2 and 3 - attenuated CV output. If no cables are plugged into an output jack, it is summed into the subsequent output jack.

25 mA +12V 20 mA -12V 0 mA 5V
10 HP 27mm deep

Review: By 1995 and the release of It's A Man's World, Cher was already up to her 21st studio album. It marked the start of her second period with the Warner Group and hit the Top 10 of the UK Charts as well as being certified gold. It features an unconventional mix of songs that draw on the Deep South as well as her pop and rock roots. The biggest tine of them all is 'Walking In Memphis' which remains an ever popular sing along hit to this day and is a cover of Marc Cohn's song of the same name. This Deluxe Edition reissue comes on eight sides of coloured vinyl.

Notes: Are you a synth enthusiast looking for the ultimate addition to your setup? Look no further than the Novation Summit - a powerhouse synthesizer that delivers unparalleled sound quality and versatility.

With 16-voice polyphony and dual-filter architecture, the Summit allows you to create rich, complex sounds that are both dynamic and expressive. And with its intuitive interface and advanced features, including dual stereo effects engines and an arpeggiator, the Summit is perfect for both studio production and live performance.

But with a piece of gear as valuable as the Novation Summit, it's essential to protect it from any potential damage. That's where Decksaver comes in! Decksaver's custom-moulded polycarbonate cover is specifically designed to fit the contours of the Summit, providing maximum protection against dust, spills, and accidental impacts.

Crafted from ultra-durable polycarbonate material, this Summit cover is super-tough yet lightweight, ensuring that your precious synth is always safeguarded without weighing you down. So whether you're transporting your Summit to a gig or storing it at home, you can rest easy knowing that it's protected by a Decksaver cover.

Investing in the Novation Summit is a big step for any musician, but protecting your investment is just as important. So why wait? Grab a Decksaver cover today and keep your Summit safe and sound!

Features Decksaver's own Soft-fit inserts to protect delicate wooden cheek panels.

Dimensions

Weight 1.65 kg
Length 101.5cm
Depth 31 cm
Height 5.5cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires, and sunlight.

Review: Swimming by the late Mac Miller, released in 2018, stands as a poignant testament to the rapper's artistic evolution and introspective depth. The album is a sonic exploration of self-discovery and resilience, addressing themes of mental health and personal growth. Miller's introspective lyricism, coupled with lush production and jazzy instrumentation, creates a soulful and immersive soundscape with tracks like 'Self Care' and 'Ladders' showing his lyrical vulnerability and musical versatility. Swimming not only received critical acclaim but also serves as a bittersweet reflection on Miller's artistic prowess and leaving an indelible mark on fans in the process.

Review: American singer-songwriter Bruce Springsteen is about as big a music star as there could possible be. It all began in January 1973 when the legendary rocker dropped his debut album, Greetings from Asbury Park, NJ which is now back in print in several different formats as a "hybrid" remastered version that brings together both regular and "super audio" versions. It's a still superb album that laid out The Boss's sonic vision and was noted by Rolling Stone critic Lester Bangs for being dexterous and on point socially. Bluesy rockers, semi-acoustic treats, funky workouts and plenty more all feature on this limited edition 180 gram audiophile vinyl.

Notes: Remote extension module that allows to connect 16 signals (audio, CV, gate or whatever) between large or spread-out cases.

To avoid bleeding, signals are isolated with a ground line between them (both in the ribbon cable and the printed circuit).

The bundle consists in two XT modules and two ribbon cables (1, 1.5 or 2 meters depending on the option selected).

This is a passive module, it does not draw any current.

5 HP

Notes: Use the Pico Platform compressor / limiter on any instrument for precise and powerful control of your signal's volume and of course, extended sustain on leads. Add subtle dynamic control to level out peaks and valleys in your signal or give your sound a real squeeze for extra sustain and pop. The Pico Platform is extremely transparent with no tonal colouring, making it extremely versatile and easy to work into your existing set up.

The Pico Platform's control set is simple yet comprehensive. Use the Sustain control to adjust the compressor ratio or limiter threshold for a subtle or extreme effect. The addition of a Blend knob allows for adding seamless sustain while preserving attack and tone. Adjust the Attack control to set when the compressor activates after a transient. Use the Mode button to choose between Compressor and Limiter modes and Soft Knee or Hard Knee compression curves for smoother or more dramatic compression styles.

Studio-style compressor / limiter to precisely tune dynamics
Compressor and Limiter modes for a wide range or compression styles
Selectable Hard Knee / Soft Knee compression curves
Sustain adjusts Compressor ratio or Limiter threshold
Attacks adjusts attack time
Blend adjusts dry/wet ratio
Volume control overall output level
Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: Module A-147-5 contains four voltage controlled low frequency oscillators (VCLFO) with triangle waveform outputs. All LFOs share a common frequency control. Each of the LFOs 2, 3 features a Delta control which is used to shift the frequency of the LFO in question up or down. With the Delta controls at center positions the frequencies of all LFOs are roughly the same. To control the frequencies by external control voltages four CV inputs are available which follow roughly the 1V/oct standard.

The module has these controls and in/outputs available:

Control F: manual control of the frequency for all four LFOs
Control Delta F2, F3 and F4: manual control of the frequency shift up/down for the LFO in question
Sockets CV 1...4: Frequency control voltage inputs (normalled from top to bottom)
Sockets with triangle symbol 1...4: triangle outputs
LEDs: visual displays of the triangle outputs (red = positive, yellow = negative output voltage)

Application examples:

Generation of four triangle modulation signals with a common frequency control for all LFOs and individual controls for the frequency deviation of each LFO, manually adjustable and controllable by external control voltages
Generation of modulation signals for polyphonic FM/PWM applications. For this the four CV inputs are connected to the same control voltages which are used to control the frequencies of the corresponding VCOs. That way each LFO follows the frequency of the associated VCO with the possibility to control the frequency of all VCOs (control F) and the frequency deviations (Delta F controls). For the simultaneous modulation depth control the Quad VCA module A-130-4 is recommended.
Generation of complex modulation signals by summing up the outputs (e.g. by means of a mixer module A-138n / A-138i / A-138j)

Technical notes:

The level of the triangle outputs is about +/-5V (10Vpp)
The manually adjustable frequency ranges from about 0.025 Hz (about 40 seconds) to about 50 Hz with the delta controls of LFOs 2, 3 and 4 about center position
The frequency deviations adjusted by the delta controls are about +/-1:5. Example: with 1 Hz in center position the frequency shift ranges from about 0.2 Hz in position -5 to about 5 Hz in position +5 (1 Hz/5 = 0.2 Hz, 1 Hz*5 = 5 Hz).
The manual frequency controls and the control voltage inputs have an exponential control behavior
With external control voltage the max. frequency is about 150 Hz, the minimum frequency
The scale of the CV inputs is roughly 1V/oct (not adjustable)
The CV inputs are normalled from top to bottom. Provided that only socket CV1 is patched CV1 controls the frequencies of all four LFOs.
When each CV input is patched to it's own control voltage each LFO is controlled individually by it's own CV. In this case CV1 controls only the frequency of LFO1.
Internally the rectangle outputs are available at four terminals (typ level +/-10V or 20Vpp). If required they can be wired to four sockets of a DIY breakout module made by the user, 1k protection resistors are recommended to avoid short circuits. If lower levels are required passive attenuators (voltage dividers) may be used.
Internally is even an (unbufferd) triangle sum signal available. For this each of the four triangle outputs is simply connected to the sum output terminal via a 47k resistor. This output has high impedance and should be buffered or amplified to avoid level drop when the load changes (e.g. by means of an A-180-3 or A-180-4 or A-183-3).
By changing the values of the capacitors in the LFO circuits even other frequency ranges are possible (e.g. Quad VCO to form kind of a cloud VCO). Pay attention that the accuracy of the CV input scales is not sufficient for precise 1V/oct VCO applications. The 1V/Oct scales cannot be adjusted and the circuits are not temperature compensated.

Dimensions
4 HP
45 mm deep

Review: Apparently inspired by a request for a reissue of their first 'greatest hits' comp Discography on vinyl, Smash is a career-spanning retrospective that rounds up all of the Pet Shop Boys singles to date - and there have been rather a lot over the years - in freshly remastered form. Naturally, it's a beautifully presented box set, featuring six slabs of wax (each in bespoke inner sleeves) and a booklet containing track-by-track liner notes by the iconic duo and journalist pal Chris Heath. It contains some of the greatest pop music made over the last four decades, with familiar hits being joined by fan favourites and occasionally overlooked later cuts. Basically, if you love the Pet Shop Boys you need this in your life.

Notes: Serious Rock DNA forged into a compact, battery-powered amp

BOSS Katana amps have received accolades from guitarists everywhere for their fantastic sound and feel, onboard effects, and great value. Now, the Katana-Mini makes serious Katana tone accessible in a small, go-anywhere amp that runs on batteries. Offering sound quality that far exceeds other amps in its class, this miniature powerhouse features an authentic multi-stage analogue gain circuit for big, expressive sound, plus a traditional analogue EQ and an onboard tape-style delay. Ultra-compact and travel-ready, the Katana-Mini delivers inspiring Katana tone anywhere you want to play.

Unlike typical small, battery-powered guitar amps that offer so-so sound quality, the Katana-Mini produces big, full tone that inspires you to plug in and play for hours at a time. BOSS's comprehensive design approach includes a custom speaker, advanced hardware, refined circuitry, and special component selection, which all work together to produce maximum sound quality in a minimum footprint. The amp also incorporates BOSS's decades of research in energy efficient design, providing class-defying power and punch from only six AA-size batteries.

Inspiring Tones, Ready to Rock

The Katana-Mini's all-analogue input circuitry includes multiple gain stages that drive three classic sound settings, offering the same cascaded gain approach found in high-end amp designs. This is what gives the Katana-Mini its satisfying tone and quick, interactive feel, with distortion that's easily controlled with input volume and picking strength. Inspired by BOSS's flagship Waza amp, the Katana-Mini's Brown setting delivers expressive, high-gain tones rich with harmonics, perfect for heavy riffs and soaring solos. Crunch provides overdrive that's ideal for rock rhythms and bluesy leads, while Clean offers up crisp, sparkling tones with punchy dynamic response.

Analogue Tone Stack and Onboard Delay

In contrast to the limited EQs found in other small amps, the Katana-Mini comes equipped with a genuine three-band analog tone stack. This provides natural sound shaping via familiar bass, mid, and treble controls, just like the tone stack in a full-size stage amp. In addition, you can enhance your sound further with the Katana-Mini's cool tape-style delay. Using the dedicated time and level knobs, it's simple to dial in everything from subtle reverb-like ambience to long, warm delay repeats.

Jam at Home or Grab and Go

Thanks to the Katana-Mini's advanced-yet-compact design, you can plug into serious guitar tone any time and any place. Weighing just under three pounds, it sits easily on a tabletop or shelf at home. And with the integrated handle and battery operation, it's easy and convenient to grab the amp and play anywhere you want, indoors or out. With the aux input, you can even plug in your smartphone and jam along with your personal music library or tracks streamed from the web. And for private practice and recording situations, you'll want to take advantage of the phones/recording output, which features special cabinet voicing for real mic'd amp tone.

Specifications

Rated Power Output: 7 W
Nominal Input Level: INPUT: -10 dBu (1 M ohm), AUX IN: -10 dBu (20 k ohm)
Speaker: 10 cm (4 inches)
Controls: POWER switch, TYPE switch

GAIN knob: VOLUME knob

[EQUALIZER]
BASS knob
MIDDLE knob
TREBLE knob

[DELAY]
TIME knob
LEVEL knob
Indicators: POWER

Connectors
INPUT jack: 1/4-inch phone type
AUX IN jack: Stereo miniature phone type
PHONES/REC OUT jack: Stereo miniature phone type
DC IN jack
Power Supply: Alkaline battery (AA, LR6) x 6, Rechargeable Ni-MH battery (AA, HR6) x 6, or
AC adapter (sold separately)
Current Draw: 350 mA

Expected battery life under continuous use:
Alkaline battery: Approximately 7 hours
Rechargeable Ni-MH battery: Approximately 9 hours (When using batteries having a capacity of 2500 mAh.)
* This can vary depending on the capacity of the batteries and the conditions of use.
Accessories: Owner's manual, Alkaline battery (AA, LR6) x 6
Option (sold separately): AC adaptor (PSB series)

Size & weight

Width: 230 mm / 9-1/16 inches
Depth: 116 mm / 4-5/8 inches
Height: 181 mm / 7-1/8 inches
Weight (including battery): 1.2 kg / 2 lbs 11 oz

Notes: Verb Core Deluxe offers 8 different reverb effects in a single, straightforward stomp box format. A selection of classic and contemporary reverb types are available, with new features such as buffered tail bypass and kill dry functions. Each reverb type has adjustable Decay, Level and Tweak, which affects a different parameter depending upon the delay type selected. The dry signal follows an all-analogue signal path, keeping the signal pure and helping to avoid unwanted noise. If you need a reverb on your pedal board, this could be the answer to all your needs.

Mono or full stereo signal path
True bypass or buffered with reverb tails
8 distinct reverb types
Hold the footswitch for additional freeze function
USB-C port for firmware updates

Power supply: 9Vdc (PP3) battery or optional power adaptor
DC input connection: DC5521 jack (for optional adaptor - pin-negative)
Current consumption: <120mA
Controls: Decay, Level, Tweak, Reverb type
Modes: Room, Hall, Plate, Damp, Shim, Spring, Tre-verb, Mod-verb
Inputs: L+R 6.3mm mono jack
Outputs: L+R 6.3mm mono jack
Sampling format: 48kHz, 24-bit
Input impedance: 1M ohm
Output impedance: 1k ohm
Dynamic range: 104dB
Dimensions: 122 x 72 x 47mm
Weight: 270g

In the box

The box for this item contains:

Verb Core Deluxe pedal
Alkaline PP3 battery

Notes: DJ-specific version of AIAIAI's modular TMA-2 XE headphones, featuring 40mm S01 drivers, slim H01 headband, on-ear PU leather E02 earpieces and straight 1.5m C05 cable. Quality sound with loud, punchy response and eco-friendly credentials.

Supplier's Notes:
Modular DJ headphones.

Balanced sound
Clear sound at high volume levels
High sound isolation
Weighing only 168g
Modular headphone design

Modular DJ headphones with balanced sound for DJ performance and music exploration.

Signature bio-diaphragm drivers engineered to deliver high volume levels and minimise distortion when performing in loud environments. Weighing only 168g for enhanced comfort over extended periods of time.

Balanced sound; punchy bass

Critically acclaimed sound specifically designed for live performance. Punchy bass and balanced sound for DJ performance and music exploration.

The speaker unit contains a bio-cellulose diaphragm made from bacterial cellulose, an organic compound grown using certain types of bacteria. The precision-grown diaphragm from bio-cellulose is stiffer, lighter, and stronger than regular PET speaker units, allowing the sound-producing diaphragm to vibrate without the levels of distortion found in other speakers.

Each of these qualities results in more accurate and detailed sound from the speaker with the ability to retain clarity of sound at high volumes.

Lightweight & durable

Put to the test and trusted in the most vigorous environments - on the road, in the studio, and on stage. This requires the highest standards and zero compromise.

Modular product design

With interchangeable components such as earpads, cables, and speaker units, you can upgrade or change parts of your headphones to improve sound quality, comfort and style.

Weighing only 168g

Slim headband design made from high grade nylon covered in neoprene, results in a total headphone weight of only 168g.

High grade materials

Speaker units made from 30% recycled plastics and diaphragms made from bio-cellulose. Ear-cushions made from soft and resilient vegan leather.

The TMA-2 DJ XE comes with a number of specific features suitable for live DJing.

Cable lock

Make sure the cable are not pulled out while playing by locking it to the speaker unit.

Adjustable cups

Change the position of the speaker units for the perfect headphone fit.

Angled stereo plug

Reduce the risk of pulling the plug from the mixer, and less intrusive cable when you are beat mixing.

Stereo jack adapter

Change from a stereo mini jack (3.5 mm) to a larger stereo jack (6.3 mm) with the adaptor.

In the box

S01 . Balanced sound - Bio-diaphragm

Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose to reduce distortion and increase transparency. Tuned for a balanced, accurate sound. Balanced sound - Bio-diaphragm.

H01 . Slim - PU foam

Slim and lightweight polycarbonate headband with soft, durable PU foam padding.

E02 . On ear - PU leather

Soft on-ear memory foam cushions covered with PU leather. The thickness and materials gives high isolation and a punchy sound. Strong bass and low end dynamics.

C05 . Straight - 1.5m - Adapter

Straight black 1.5m thermo plastic cable with soft touch surface. Comes with 1/4 to 1/8 screw-on adapter.

As a music creator, you need headphones that can keep up with your evolving needs and styles. These TMA-2 modular headphone system offers a customizable solution that adapts to your creative process. With interchangeable components such as earpads, cables, and drivers, you can upgrade or change parts of your headphones to improve sound quality, comfort, or style.

By investing in this modular headphone system, you're not just buying headphones - you're investing in a long-term solution that evolves with your music. This reduces electronic waste while ensuring that you always have the optimal headphones just for you.

Diaphragm: Bio-cellulose
Driver diameter: 40 mm
Impedance: 32 Ohm
Magnet: High-grade Neodymium
Max power: 100 mW
Rated power: 40 mW
Resonance freq: 80 Hz

Notes: The Prestige Series of 78-RPM cartridges are designed for high output and excellent stability under even severe use. Each cartridge can be used for either archival or casual play without concern for undue wear on the record. All Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world.

Frequency Response: 10-55,000 Hz
Principal: MI
Input Load: 47K
Output at 1KHz 5CM/sec.: 5mV
Recommended Tracking Force: 2.5
Stylus Type: C
Inductance: 45mH
Resistance: 475
Stylus Replacement: U
Mounting: S/P
Weight: 5.5

Notes: The Boom Arm is specified to hold up to 500g. Microphones include the Profile, MK 4, MK 8, TLM 102, TLM 103, MD 421, and more - please note that a shock mount will add additional weight, so be mindful if extending the arm fully.

3-point self-locking boom arm (with cable management and adjustable desk clamp)

780 mm (horizontal reach)
820 g

Notes: The SLR-USB is a professional laptop stand with integrated USB hub DJ setups. The lightweight and foldable steel frame fits all standard laptop sizes from 11"-18", tablets, controllers etc. The advanced design allows you to set up the stand in 5 different positions. The stand features a USB-C PD port (3.2 Gen 1, SuperSpeed PD5) to directly power the MacBook Pro and laptops with USB-C power ports. The 4 additional USB ports are used to connect USB peripherals. The ports comply with the USB 3.2 standard, are downward compatible and offer fast data transfer with SuperSpeed support. The stand is designed for a load of up to 60 watts; to ensure a stable power supply for all devices, it should always be operated in active mode with a USB power supply. Delivery includes a practical transport bag, as well as USB cables.

Features

Foldable laptop stand with USB hub and power delivery port
Fits all standard laptop sizes from 11"-18", tablets, controllers and many other devices
Powers MacBook Pro and laptops and provides 4 additional USB ports
5 different setup positions
Can be used in active or passive USB hub mode
Foldable
The article is delivered with practical transport bag
Easy to assemble
Space-saving storing

Package contents
1 x stand, 4 x foot, 3 x USB cable, 2 x holder, 1 x bag, 1 x user manual

Technical specifications

Power supply: 5 V DC 2 A
Power connection: Mains input via USB C (M) mounting version power supply cord for USB A mains connection
Setup: Easy to assemble; Space-saving storing
Maximum load: 4 kg
Type (general stands): Laptop stand
Status LED: Power
Connections: Input: 1 x USB C (M) mounting version 5 V
Output: 1 x USB C (M) mounting version
Output: HUB via 4 x USB A (F) mounting version
USB port: 2 x USB 3.2, Typ C-PD
4 x USB 3.0, Typ A, 1,5 A

Material: Metal, powder-coated
Colour: Black

Dimensions: Width: 25 cm
Depth: 26,5 cm
Height: 30 cm
Weight: 2,05 kg

Notes: A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ SC LIVE 2? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Denon DJ SC LIVE 2, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

Specifications:

Colour: Black
Weight: 3,50 kg / 7.7 lbs
Outer Dimensions (W x H x D): 73.0 x 44.0 x 14 cm | 28.7 x 17.3 x 5.5 inch
Inner Dimensions (W x H x D): 66.1 x 39.9 x 11.2 cm | 26.0 x 15.7 x 4.4 inch
Material: Durashock moulded EVA foam
Protection: Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks

Extras

Heavy duty handle
Easy grip zipper pulls
Convenient shoulder strap
Fits: Denon DJ SC LIVE 2

Review: ***B-STOCK: Box damaged, product in perfect working order***


You can always rely on the Cocoon compilations to bring you a high level of quality control and an authoritative overview of the state of techno around the time of release. This mammoth six-LP set will give you a lot of music to work with, and it's featuring a dizzying cast of high-end operators starting with the mighty Stephen Brown. Each track gets a side of vinyl to itself, serving as a kind of statement for how much faith the label put in each of these 12 tracks. Amongst the best on this top-drawer comp are Daniel Avery's metallic, spellbinding 'Your Future Looks Different In The Light' and Carl Finlow's lithe electro workout 'Surface Control', but as you might well expect each track is one you'll turn to again and again to give your mix some spice.

Notes: A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-REV5 controller? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer DDJ-REV5 controller, this case is perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight: 2,26 kg / 4.972 lbs
Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.0 cm | 30.4 x 18.4 x 5.1 inch
Inner Dimensions (W x H x D): 76.2 x 44.1 x 11.0 cm | 30.0 x 17.4 x 4.3 inch
Material: Durashock moulded EVA foam

Protection:

Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks
Extra's Extra space for cables or power adapter
Convenient carry handle and shoulder strap
Easy grip zipper pulls

Fits:

Pioneer DDJ-REV5 Controller + power adapter, extra cables

Notes: The Dreadbox PSYCLOP is the ultimate modern utility device. It's an Effects Chain Loop with Dry/Wet mix control, Signal Attenuator and Boost as well as Expression to CV (Control Voltage) converter, all in one easy to use package suitable for string instruments or synthesizers and is also Eurorack compatible.

PSYCLOP is not your average Effects Loop Mixer. Capable of managing any type of signal from instruments or effects pedals, PSYCLOP seamlessly blends them with its parallel effects loop.

Its features include Input Attenuation of up to -20 dB and an Output Gain Boost of up to +20 dB in order to match any signals. For unity gain, simply set the Input Attenuation Amount to 100% with the IN control and using the OUT knob, adjust the Output Gain Level to 0%.

To avoid phase cancellation issues between the dry and wet signal paths, the PSYCLOP also features a simple but effective Effects Loop Phase switch, which is easily accessible on the pedal's side.

Additionally, PSYCLOP is capable of converting TRS Expression signals to CV and makes them usable with most Eurorack gear, making it a perfect device for synth fans and sound design enthusiasts. The pedal's EXP knob attenuates the CV output. When nothing is connected to its CV IN jack, the CV OUT jack will output 0-5V depending on this knobs' setting and a connected EXP pedal's position.

So all you have to do is plug in and embark on your next thrilling sound design adventure.

Review: Prince and the New Power Generation strode into the 90s full power with Diamonds & Pearls, one of the all-time greats from the purple legend’s imperious canon. It’s a record which shows the full force of Prince’s songwriting power from the fired-up bangers like ‘Thunder’ and ‘Gett Off’ to the none-sexier ‘Cream’ through to the heart-melting ballads ‘Diamonds & Pearls’ and ‘Strollin’. It’s a plush, high-end sound which comes through in startling clarity on this remastered reissue. In line with the other recent Prince reissues, this is the definitive deluxe edition of the record presented across four discs bursting with alternative takes, remixes, B sides and unreleased gems which take us even deeper into the genius of one of the greatest to ever do it.

Notes: Remote extension module that allows to connect 16 signals (audio, CV, gate or whatever) between large or spread-out cases.

To avoid bleeding, signals are isolated with a ground line between them (both in the ribbon cable and the printed circuit).

The bundle consists in two XT modules and two ribbon cables (1, 1.5 or 2 meters depending on the option selected).

This is a passive module, it does not draw any current.

5 HP

Notes: The Morphor Distortion - LED Based module is a compact and characterful analogue clipping distortion module. Loosely based on the legendary MXR distortion circuit this module is perfect for adding some extra crunch to your patches.

With CV-controlled gain setting, three distortion modes and a dry/wet mixing control, this module gives you lots of options to spice up your sound without taking up too much space. Internally the clipping is performed by LEDs which are also shown in the front of the module, so you can see your sound getting destroyed with your own eyes.

Weight: 53 g
Dimensions: 128.5 × 20 × 40 mm
Width: 4 HP

Notes: Dust cover designed for the ALM 84HP 9U modular synth case.

Review: After the success of the first Alessandroni Proibito box set, which sold out in pre-sale before it even hit the stores, Four Flies is proudly back with Volume 2 of the compilation. This new release too features five exclusive 7" singles, housing a total of ten seriously rare tunes. All previously unreleased in physical format, the tracks have been carefully selected from the soundtracks of five obscure Italian films from the late 70s - sexy flicks that flirted with the line between erotic and explicit, and which are now largely forgotten, having been out of circulation for decades. As was the case with the previous volume of the compilation, Alessandroni's music rises above the films' flimsy plots, improvised actors, and amateurish production, exuding his distinctive touch thanks to the (typically Italian) artisanal approach he took to his musical craft. The composer let his creativity run free, playing with his instruments at home as if he were in his own little amusement park; trying to have fun and produce something entertaining and captivating with just the few means at his disposal.

Notes: PanMix Jr is a high quality 3 channel mixer with manual panning and volume controls with dual concentric knobs. Each channel's output is separately available. Also channels 1 and 2 can be switched to be mixed with the subsequent channel, allowing for 1-1-1, 1-2, 3 mix configurations. Equal power pan law (3dB) is provided. Left and Right led indicators available for all three channels.

Several modules can be chained together via connections on the back side. This connection is possible with other Happy Nerding stereo modules too. At the moment PanMix Jr stereo output can be internally sent to another PanMix Jr, 3x Stereo Mixer and Isolator module. Or stereo signal can be received from another PanMix Jr, OUT, 3x Stereo Mixer, latest revision of PanMix.

55 mA +12V
55 mA - 12V
35 mm Depth
6 HP wide

Notes: PanMix Jr is a high quality 3 channel mixer with manual panning and volume controls with dual concentric knobs. Each channel's output is separately available. Also channels 1 and 2 can be switched to be mixed with the subsequent channel, allowing for 1-1-1, 1-2, 3 mix configurations. Equal power pan law (3dB) is provided. Left and Right led indicators available for all three channels.

Several modules can be chained together via connections on the back side. This connection is possible with other Happy Nerding stereo modules too. At the moment PanMix Jr stereo output can be internally sent to another PanMix Jr, 3x Stereo Mixer and Isolator module. Or stereo signal can be received from another PanMix Jr, OUT, 3x Stereo Mixer, latest revision of PanMix.

55 mA +12V
55 mA - 12V
35 mm Depth
6 HP wide

Review: The Chems, as they are affectionately known by fans, are breakbeat maestros that have been out in a field of one for many decades. Now they continue to serve up the most blistering big room beats, techno and electro fusions each time they play one of their famously spellbinding sets, as well as on this latest record which is presented here across six sides of vinyl. They are revealing all about their accomplished and decorated career in a new biography that arrives the same time as this new album, For The Beautiful Feeling. It's a high-octane sound full of maximal grooves and a mad guest spot from none other than Beck.

Notes: 3xMIA is a 6-channel attenuverting mixer/offset/scale/polarizer

3 blocks of 2-channel attenuverting mixers, using dual concentric pots. Each channel can be switched to mix with the subsequent channel, allowing for 2-2-2, 4-2, 6 mix configurations.

With nothing plugged into an input, an offset is normalled to that channel. The inner knobs control the A inputs, while the outer knobs control the B inputs.

DC coupled, so it can be used for audio, CV, or both at the same time.

80 mA +12V
80 mA -12V
35 mm Depth
24HP wide

Notes: Module A-130-2v is composed of two identical voltage controlled amplifiers (VCA). Each VCA has a manual gain control (also named Initial Gain) and a control voltage input with attenuator. The character of the control scale can be switched to linear or exponential. All inputs and outputs are DC coupled. Consequently the VCAs can be used to process both audio and control voltages (e.g. for voltage control of the level of LFO or envelope signals). The signal input has no attenuator available but is capable to process up to 16Vpp signals (i.e. -8V...+8V) without distortion. For the processing of higher levels an external attenuator (e.g. A-183-1) is recommended.

The amplification range is 0...1. Even with a higher external control voltage the amplification remains at 1 (kind of "amplification clipping" at 1).

Controls (for each of both units):

Gain: manual gain control (Initial Gain) in the range 0...1
CV: attenuator for the CV input
lin/exp: switches the VCA characteristic to linear or exponential, in center position the VCA is off (mute function)
Inputs and outputs (for each of both units):

CV: control voltage input, min. +5V required for max. amplification (1) with CV control fully CW and Gain fully CCW
In: signal input, max. 16Vpp (+8V...-8V) without distortion
Out: signal output

A-130-2v is the slim version of module A-132-3 and offers essentially the same features. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-132-3. The module is primarily planned for applications where only limited space is available.

Power consumption: 30mA at +12V and 30mA at -12V

Depth: 50mm

HP : 4

Notes: AXE I/O ONE is the ultimate compact and affordable 1-in/3-out audio interface designed for guitarists, musicians and engineers who want the best sound possible for recording guitar or bass. It combines IK's patent-pending Z-Tone impedance control, an Amp Out for Tone Modeling, multiple circuit topologies, and award-winning AmpliTube and TONEX software for a complete digital studio rig.

AXE I/O ONE delivers professional audio with sample rates up to 192 kHz, 108 dB dynamic range, and 9 Hz-45 kHz frequency response.

AXE I/O ONE offers a simple, streamlined setup for Tone Modeling and re-amplification. Use the Amp Out to create a virtual Tone Model of your amp, cab or pedals including distortion, overdrive, EQ, Fuzz and boost. The Amp Out can also be used as a standard re-amping output for even more creative options.

AXE I/O ONE's main channel offers 3 different circuit topologies. This gives you three different options to dial in the perfect tone for any type of guitar pickup or style.

The PURE setting offers a completely transparent and ultra-accurate instrument preamp that won't colour your sound in any way.

Switching to the Class A JFET input buffer adds midrange focus, warmth and harmonic enhancement, giving you more tonal options from the same instrument.

ACTIVE pickups don't require a Hi-Z input, so this setting bypasses unnecessary gain stages to keep your signal path as direct, transparent and clean as possible.

AXE I/O ONE's patent-pending Z-Tone circuit lets you go from a tighter/sharper tone to a thicker bolder tone with a simple twist of a dial. Z-Tone changes the impedance from 1 MO ("sharp") down to 2.2 kO ("bold") giving you ultimate freedom to dial in the perfect feel and tone from electric guitar and bass pickups.

AXE I/O ONE offers a PURE mic preamp designed for transparent and clean recording. The mic preamp offers a wide, flat frequency response: 9 Hz to 45 kHz, +/- 0.5 dB (at 96 kHz) to avoid unwanted coloration and perfectly preserve the sonic character of your voice, acoustic guitar, piano or other instrument.

It's also ideal for capturing your rig with IK's groundbreaking TONEX AI-based Tone Modeling software. With both AmpliTube 5 SE and TONEX SE included, you'll have everything you need to record, model and play right out of the box, plus AXE I/O ONE works with all your favourite recording applications.

AXE I/O ONE offers a range of useful features including dedicated controller inputs that let you connect up to two expression pedals or two single/double switches to control AmpliTube, or any other software, in real-time without putting your hands down. You can also use AXE I/O ONE's MIDI input and output to connect floor controllers or iRig Stomp I/O to add even more real-time controls - or use it with regular keyboards and other standard MIDI gear.

Best-in-class guitar tone

Selectable Active/Passive/discrete JFET/PURE instrument preamp
Patent-pending Z-Tone input for a tonal palette never heard before
Amp Out for Tone Modeling or re-amplification
Connect up to 2 expression pedals, single and double-switches
Lightweight compact design for recording on the go
Includes AmpliTube SE, TONEX SE, and Ableton Live Lite

Premium studio sound

High-resolution, ultra-low-noise Class A microphone preamp
Best-in-class conversion and superior analog design
USB-C bus powered
108 dB dynamic range
Includes control software
High definition 24-bit/192kHz audio

Connections

1 in/3 out (one low-noise Amp Out)
1 ultra-low noise mic in/instrument in
2 balanced monitor outs
Reference headphones out
2 fully configurable external control inputs
MIDI input/output
USB 2.0 compatible with Mac/PC

Unit Width (mm): 160
Unit Height (mm): 52
Unit Depth (mm): 130
Unit Weight (kg): 0.37

Notes: Dio: Dreamers Never Die delves deep into the singer's incredible rise from '50s crooner to his early rock days in Ritchie Blackmore's Rainbow to replacing Ozzy Osbourne in Black Sabbath - and finally cementing his rock star status with DIO. Includes 20 minutes of bonus interviews. This limited Deluxe Edition DVD & Blu-ray set is packaged in a lift-off box and includes DIO-branded trading cards, guitar picks, label pin, coasters and a fold-out poster from the film. [Deluxe Edition DVD/Blu-ray]

DVD (NTSC, no regional coding)

Notes: Two channel USB module.

Standard Mode - Send two channels into your USB device and receive two channels from USB.

Insert Mode - Send two channels to your USB device and get a copy of the sent signal in the outputs.

Toggle between the modes via a pair of jumpers on the back. The USB-B to USB-A cable is provided with the module. Why use the cutting edge USB-B? I felt the jacks were way more sturdy than mounting USB-C jacks vertically.

Expandable - Bartender, Barbacks, DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 4HP
12V: 10mA
-12V: 10mA