100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 1 to 42 of 42 on page 1 of 1
ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate) ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate) ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate)
Cat: 776311 Rel: 08 Sep 20 • View all Synth modules
 
Rhythm generator module
Notes: This module is a powerful rhythm generation machine- it features 4 voices of gate outputs (including inverted outputs for logic NOT sequences) where each voice can have independent lengths, all configurable with direct knobs anc cv inputs.

Perfect for precise polyrhythmic patterns and all sorts of non-linear sequencing.

The module works by 6 different rhythm generation "algorithms / principles":
Euclidean (equal distribution)
Golomb Rulers (inequal distribution)
Probabilistic (predictable distribution)
Game Of Life (organic progression)
Footwork'n (inducted error progression)
Pong (voltage controlled Pong game)

Plus a 4 channel Gate Sequencer Mode with up to 32 steps and 16 storable presets.

Add ADDAC402B Expansion for full I/O Midi control plus access to a powerful midi interface, with:
Midi Sync
5 cv to midi channels (notes and/or cc)
4 midi to gate channels
All panel controls (knobs, switches and push buttons) as cc controls.

All fully configurable with a midi learn feature for easier configuration.

MECHANICAL:
Format: Eurorack
Width: 20 HP
Depth: 5.5 cm

CONTROL VOLTAGE I/O:
CV inputs: 0 to +10v

ELECTRICAL:
Max current: 150mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $490.49
Click for better price!
or call +44 20 7424 1960
quote 776311
ADDAC System ADDAC215 Dual S&H+ Module (black faceplate) ADDAC System ADDAC215 Dual S&H+ Module (black faceplate)
Cat: 776254 Rel: 08 Sep 20 • View all Synth modules
 
Dual sample & holds module
Notes: This new module should not be judged by it's size, at 6hp it's packed with features.

At its core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it's own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there's also 4 extra outputs: Noise, Difference, Average and Sum. The Noise output is coming from the noise source, the Difference output is the subtraction of section A minus section B, the Average output is the sum of both A plus B and then divided by 2 and finally the Sum output is the sum of both A plus B sections.

MECHANICAL:
Format: Eurorack
Width: 6 HP
Depth: 4 cm

ELECTRICAL:
Max current: +50mA/-50mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $147.37
Click for better price!
or call +44 20 7424 1960
quote 776254
ADDAC System ADDAC203 CV Mapping Module (gold faceplate) ADDAC System ADDAC203 CV Mapping Module (gold faceplate)
Cat: 776164 Rel: 08 Sep 20 • View all Synth modules
 
CV mapping module
Notes: With the ADDAC203 CV mapping you'll be able to tame that voltage range and put it where it belongs. The attenuation knob compresses your voltage range and then you can also offset it.

Two channels for your mapping needs.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 3 cm

Control Voltage I/O:
- CV inputs: i 10v
- CV outputs: i 10v

Electrical:
- Compatible with +-12v and +-15v power supplies?
- Max current: 50mA
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$194.91 SAVE 19%
 1 in stock $157.04
Click for better price!
or call +44 20 7424 1960
quote 776164
FORTHCOMING
ADDAC System ADDAC605 VC Spectral Tilt Module (black faceplate) ADDAC System ADDAC605 VC Spectral Tilt Module (black faceplate)
Cat: 791268 Rel: 31 Dec 20 • View all Synth modules
 
VC spectral tilt module
Notes: The TILT EQ concept was first introduced in the 1970's by Quad Ltd, featured on the company's model 34 preamplifier.

The tilt control tilts the frequency spectrum of the audio signal by simultaneously boosting the treble and cutting the bass frequencies, or vice versa, making it a simple to use but powerful EQ.

As stated by Quad Ltd, it was designed to produce a very gradual change in balance across the musical spectrum without changing the overall subjective level.

This gradual fall from Bass to Treble, or vice versa, means there's no sudden change and hence no 'coloration' added to the sound, the sound will remain entirelly natural but with a slight added bottom or high end. In practice, it rotates most of the audio-range frequency response around a 1Khz axis, so as to change the overall balance of the sound from warm to cool without affecting either the apparent volume or the "color" of the sound.

Here this idea is introducedinto the modular world in a stereo configuration.

CV input with attenuverter was added for the Tilt control as well as a Spectral Motion switch that allows stereo spectral matching or inverted spectrum use of the Tilt control: Left=Right matches both channels direction, i.e. when left channel is tilted to the low end the right channel will also be tilted to the low end

Left Right inverts the Right channel spectrum, i.e. when left channel is tilted to the low end the right channel will be inverselly tilted to the high end, or vice-versa.

This possibility is extremmelly interesting when applied as a stereo effect, in other words a spectral EQ panner. This module will also be available as a full DIY kit.

Specs:
4Hp
4.5cm deep
40mA on each rail
Read more
MRP:$197.49 SAVE 20%
coming soon $158.11
ADDAC System ADDAC305 Manual Latches Module (black faceplate)
Cat: 776301 Rel: 15 Sep 20 • View all Synth modules
 
Manual latches module
Notes: The ADDAC305 Manual Latches is a combination of 8 manual latching switches in a small and elegant module: each button toggles between Gate high / Gate low when pressed, outputting a 5V gate signal. Additionally 4 of the 8 available latches, sport inputs and can act as manual latching switches, allowing the incoming signal to pass to the output when the button is toggled.

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
Gate outputs: 0 +5v

ELECTRICAL:
Max current: 10mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $111.87
Click for better price!
or call +44 20 7424 1960
quote 776301
ADDAC System ADDAC504 Probabilistic Generator Module (black faceplate)
Notes: This is a complex Gate / CV generator based on probabilities.

Functions:

Knob 1:
%1 = Gate 1 Probability
5TG = Fifth Output Type: Trigger/Gate
N1 = Note 1 Tuning

Knob 2:
%2 = Gate 2 Probability
T.SIZE = Trigger Size
N2 = Note 2 Tuning

Knob 3:
%3 = Gate 3 Probability
DIR = LOCK Mode Direction: Backwards/pendulum/forward
N3 = Note 3 Tuning

Knob 4:
%4 = Gate 4 Probability
S.SIZE = LOCK Mode Sequence Size: up to 16 steps
N4 = Note 4 Tuning

Knob 5:
SWING X = Clock Swing X: 1 to 16
Y = Clock Swing Y: 1 to 16
N5 = Note 5 Tuning

Gate Outputs Behaviour:

At every clock input, based on the four knobs probability settings, the module will select one active gate out, only one of the five gates will be active at all times. All Gate outputs can also behave as a Trigger instead, Trigger size can also be adjusted.

The knobs set the probabilities of each gate to be chosen, here's an example of how this operates

With all first four knobs at 12 o'clock the first Gate has 50% of being the chosen one, the remaining 50% of the times will be passed through the next knobs. So Gate 2 at 12 o'clock has 50% of the remaining 50% left by setting one, which leaves it with 25% chance of being the chosen one, the remaining 25% will be passed through Knob 3 which will have 12.5% chance of being the chosen one, the remaining 12.5% will be sent to Setting 4 which will have a probability of 6.25%. The remaining percentage left by the 4 Settings will always be the probability of Gate 5, in this case the remaining 6.25%.

Here's a couple more examples.

All knobs at 12 0'clock
Setting 1 = 50% chance, 50% left for remaining settings.
Setting 2 = 25% chance, 25% left for remaining settings.
Setting 3 = 12.5% chance, 12.5% left for remaining setting.
Setting 4 = 6.25% chance, 6.25% left for Gate 5.

All knobs at 9 0'clock (aproximate values)
Setting 1 = 20% chance, 80% left for remaining settings.
Setting 2 = 16% chance, 64% left for remaining settings.
Setting 3 = 12.8% chance, 51.2% left for remaining setting.
Setting 4 = 10.24% chance, 40.96% left for Gate 5.

Tuning and CV outputs:

While in the Tuning page you can use all knobs to set the 5 pitches
When in tuning page knobs should be rotated one at a time!
While rotating the knobs the CV out 4 will be used as a monitor, the other 3 CV outs will be behaving normally.
The module detects which pot is being rotated and outputs the relative pitch CV on CV out 4 for all knobs.
While on this page the tuning will be quantized or not relative to the panel Quantize on/off switch. Even if this process is done in quantized mode the module always store the free value in order to allow quantisation to be turned off later.
Once you're happy with the tuning you can exit the page, new values are stores to memory while exiting the page.
When tuning the module detects both the note selected and the relative octave.

CV Outs behaviour
This will be easier to explain with examples

Let's say we tuned these notes:

C0 or 0v
D1 or 1.166v
F2 or 2.466v
G3 or 3.583v
A4 or 4.75v

1. Next Logic out calculated is gate 3.
CV outs 1-2-3 will output a note in octave 2, the note itself is randomised from the 5 tuned notes (C,D,F,G,A).
CV out 4 will output the exact note tuned with knob 3 (F2)

2. Next Logic out calculated is gate 5.
CV outs 1-2-3 will output a note in octave 4, the note itself is randomised from the 5 tuned notes (C,D,F,G,A).
CV out 4 will output the exact note tuned with knob 5 (A4)

Out 1-2-3 is octave related
Out 4 always output the original tuned note

Knobs Pages access:

MENU/TRIGGER button is used to access pages
After power up it gets to first page by default.

Page 1:
MENU/TRIGGER button is off and blinks with clock inputs

Page 2:
Pressing the MENU/TRIGGER button for 3 seconds the Button Led lights up meaning you're in Page 2, changing knobs will affect the secondary function.
Releasing the button jumps to Page 1

Page 3:
Pressing the MENU/TRIGGER button for 3 seconds the Button Led lights up, keeping it pressed without moving any knob for 3 more seconds makes the Button led go off. At this time you can release the button. After that the button will light up meaning you're in page 3, or the tuning page.
Pressing the button one time jumps to Page 1

Soft-Recall and Memory:

Knob positions are stored in memory while in operation to be able to have a soft recall of the settings, so when jumping from page to page you'll need to rotate the knob until you find the last setting and only then they start to operate. Whenever the pot crosses the last setting point the MENU/TRIGGER button will blink indicating that the knob is now active.

Page 2 & 3 have permanent memory so it will always load the last settings after power up.
Page one is volatile and powers up with the initial knobs settings.
Read more
 1 in stock $411.97
Click for better price!
or call +44 20 7424 1960
quote 776335
ADDAC System ADDAC206 Switching Sequencer Module (red faceplate) ADDAC System ADDAC206 Switching Sequencer Module (red faceplate)
Cat: 776180 Rel: 08 Sep 20 • View all Synth modules
 
Switching sequencer module
Notes: This is a Quad Channel Switcher.

Among many other possibilities it allows to:

Turn any 4x4 step sequencer into a 16 step sequencer.
Scramble sequences with diferent clock division settings.
Route 1 audio or voltage signal to 4 diferent destinations.
Switch between 4 audio or voltage signals

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 3.5 cm

ELECTRICAL:
Max current: +80mA/-40mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.
Read more
MRP:$299.47
 1 in stock $299.03
Click for better price!
or call +44 20 7424 1960
quote 776180
ADDAC System ADDAC202 Amplifiers Module (red faceplate) ADDAC System ADDAC202 Amplifiers Module (red faceplate)
Cat: 776175 Rel: 08 Sep 20 • View all Synth modules
 
Amplifier module
Notes: A dual channel Amplifier that either boosts your signals up to 10 times the original input or attenuates it to zero.

It also features two leds per channel, to monitor your output polarity.

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $133.38
Click for better price!
or call +44 20 7424 1960
quote 776175
ADDAC System ADDAC200S Size Matter Module (red faceplate)
Cat: 776135 Rel: 08 Sep 20 • View all Synth modules
 
Adapter module
Notes: ADDAC System's 1/4 to 1/8 inch adapter allow you to connect one 1/4 inch jacks to an 1/8 inch one right in from your rack- now you can leave all those cable adapters behind.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 3.5 cm

Electrical:
- Passive
Read more
 1 in stock $58.73
Click for better price!
or call +44 20 7424 1960
quote 776135
ADDAC System ADDAC807C+ Individual Channel Stereo Outputs Module (black faceplate)
Notes: Dedicated expansion for the ADDAC807C VC Summing Mixer

Features 4 individual track post fader stereo outputs.

2Hp
2 cm deep
0mA
Read more
MRP:$67.12
 1 in stock $66.68
Click for better price!
or call +44 20 7424 1960
quote 776670
ADDAC System ADDAC501 Complex Random Module (red faceplate) ADDAC System ADDAC501 Complex Random Module (red faceplate)
Cat: 776328 Rel: 08 Sep 20 • View all Synth modules
 
Random CV generator module
Notes: The ADDAC501 does random CV generation and outputs it through four independent channels. You can control the desired range of voltages and time frequency at which new values are generated.

It can also be triggered by an external CV source and the output voltages can be either free or quantized (if you prefer to have a standard C Major scale).

Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 5 cm

Control Voltage I/O:
- CV inputs: 0 - 10v
- CV output: 0 - 5v (0 - 10v through jumper)
- Gate in threshold: 2.5v

Electrical:
- Compatible with +-12v and +-15v power supplies
- Max current: 150mA
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $334.52
Click for better price!
or call +44 20 7424 1960
quote 776328
ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate) ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate)
Notes: The ADDAC501B expansion is connected directly to the ADDAC501 Complex Random. It extends functionality by adding gate outputs to the random generators.

If ADDAC501 generates a new random above the average between Minimum and Maximum, then the respective gate on ADDAC501B is triggered.

There are three pairs of gates, corresponding to the respective outputs on ADDAC501. Each gate pair has both positive and inverted outputs.

This expansion module also offers a dedicated knob for gliding effects. With it you can have a voltage ramp between two consecutive random numbers- randomized "legato" expressiveness.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 5 cm

Control Voltage I/O:
- Gate outputs: 0 - 5v

Electrical:
- Connects directly to ADDAC501
- Max current: 20mA
Read more
 1 in stock $133.38
Click for better price!
or call +44 20 7424 1960
quote 776329
ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate) ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate)
Notes: Inspired and officially licensed from Teia's Stochastic Function Generator which was introduced in 2013 but is no longer available. This earlier version served as an inspiration, but with a completely rebuilt and reprogrammed mcu to a fully featured 4 voice 2 stage envelope and slew generator.

ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplateADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate
This expansion allows extra I/O to the ADDAC506, namelly:

Four trigger inputs for the random engine.

Four CV random outputs from the random engine.
Read more
 1 in stock $100.02
Click for better price!
or call +44 20 7424 1960
quote 776345
ADDAC System ADDAC703 Discrete Mixer Module (black faceplate) ADDAC System ADDAC703 Discrete Mixer Module (black faceplate) ADDAC System ADDAC703 Discrete Mixer Module (black faceplate)
Cat: 776360 Rel: 08 Sep 20 • View all Synth modules
 
Mixer module
Notes: Here's the second module of ADDAC System's 700's Heritage Series.

Inspired by Moog CP3 mixer, this is a totally discrete analog mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.

This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 3 cm

Electrical:
- Max current: 60mA.
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
- black screws
- black fibre washers
Read more
 1 in stock $201.15
Click for better price!
or call +44 20 7424 1960
quote 776360
ADDAC System ADDAC301B Dual Expression Pedal Attenuator Module (red faceplate)
Cat: 776289 Rel: 08 Sep 20 • View all Synth modules
 
Dual epression pedal attentuator
Notes: Passive dual expression pedal attenuator.

Plug any CV or audio source through it and control its amplitude through any standard expression pedal.

Invert switch for inverting the expression pedal action.

Specs:
- Passive Module
- Width: 4 HP
- Depth: 3 cm
Read more
MRP:$72.28
 1 in stock $72.07
Click for better price!
or call +44 20 7424 1960
quote 776289
ADDAC System ADDAC217 Quad Gate to Trigger Module (black faceplate) ADDAC System ADDAC217 Quad Gate to Trigger Module (black faceplate)
Cat: 776261 Rel: 08 Sep 20 • View all Synth modules
 
Gate to trigger module
Notes: Following ADDAC System's T-Networks series, the importance of having the right input signal for firing drum modules or envelopes was realised. Gates and Triggers are often looked at as similar signals but at times it really makes a difference and results will change drastically depending if a Gate or a Trigger is fed to the input of such modules.

This led to the simple yet effective Gate to Trigger.
A four channel converter with bypass switch for each channel.

Any input Gate will be limited to a 1ms Trigger.

Tech Specs:
3HP
2.5 cm deep
10mA +12V
10mA -12V
Read more
 1 in stock $91.43
Click for better price!
or call +44 20 7424 1960
quote 776261
ADDAC System ADDAC102 VC FM Radio Module (red faceplate)
Cat: 773955 Rel: 08 Sep 20 • View all Synth modules
 
FM radio module
Notes: This is Version 2 of this module, updated in order to be skiff friendly.

With the ADDAC102 FM Radio you'll be able to tune-in FM radio. Besides the ability of station broadcasts as sound generators for your synthesis, you can also have a lot of fun with the fact that its a great noise generator- the static picks up all kinds of great electromagnetic interference.

It provides controls like tune, volume and seek (all of them controllable through CV input) and there's two outputs for stereo sound.
Read more
MRP:$334.32
 1 in stock $322.69
Click for better price!
or call +44 20 7424 1960
quote 773955
ADDAC System ADDAC212 EG Map Pack Module (red faceplate)
Cat: 776195 Rel: 08 Sep 20 • View all Synth modules
 
VC attentuator/offset module
Notes: A 4 Channel VC Attenuator and Offset.

The ADDAC212 is a 4-channel VC attenuator and off-setter. It lets you deal with up to four parallel inputs as a single pack, modulating their amplitude and offset (± 10V) with the same control knobs, both with cv inputs and dedicated attenuators.

Features 4 parallel VCAs with the same amplitude and offset control knobs and cv inputs with dedicated attenuators.

Idealized to be the perfect companion for Envelope Generators, you can send 4 EGs through it and control the overall amplitude and offset of all 4 envelopes at once. This allows more control over the Envelopes when patching typical synth voices.
Read more
 1 in stock $201.15
Click for better price!
or call +44 20 7424 1960
quote 776195
ADDAC System ADDAC214 VC Rotator Module (red faceplate) ADDAC System ADDAC214 VC Rotator Module (red faceplate)
Cat: 776199 Rel: 08 Sep 20 • View all Synth modules
 
VC rotator module
Notes: This is the VC Rotator, a stepped routing module for any type of signal (audio, cv, gate, trigger...)

Similar to a VC switcher but in this case there's the same number of inputs than outputs so, instead of 4 to 1 or 1 to 4, this module is always 4 to 4 but it can be patched for 2 to 2 and 3 to 3 step actions.

All four inputs get routed to the four outputs depending on the CV and Clock controls and are divided into 4 routing steps:
1. routes all inputs to the same number output: 1:1, 2:2, 3:3, 4:4
2. routes all inputs to an offset of 1: 2:1, 3:2, 4:3, 1:4
3. routes all inputs to an offset of 2: 3:1, 4:2, 1:3, 2:4
4. routes all inputs to an offset of 3: 4:1, 1:2, 2:3, 3:4

Direction determines if the clock input goes forward or backwards.
Going forward it can be set to 2-3 or 4 steps using the Rotate knob offset, going backwards always sync to 4 steps even if offseted by the Rotate knob.
For 2 & 3 step action input 1 is normalled to input 3 and input 2 is normalled to input 4.

Reset resets the internal clock to the first step.

Pendulum, external sequencing or any complex CV actions can be achieved using the CV input and dedicated attenuverter.

4 leds monitor which input is routed to output 1.
Read more
 2 in stock $191.46
Click for better price!
or call +44 20 7424 1960
quote 776199
ADDAC System ADDAC503 Marble Physics Module (red faceplate) ADDAC System ADDAC503 Marble Physics Module (red faceplate)
Cat: 776332 Rel: 08 Sep 20 • View all Synth modules
 
Marble physics module
Notes: Newtonian physics on a modular synth! The ADDAC503 Marble Physics is a CV generator based on the mechanics behavior of a marble on a tray.

Through this realtime physics simulator you'll be able to control several parameters that will affect the behavior of a model of a spherical object against a plane. You can tilt the plane or bump the marble with a certain strength, which will cause it to roll and bounce on elastic walls.

The model will output the object's XY position or velocity and you can control other physical parameters, like the walls' elasticity or the strength of a bump. When the marble hits walls the bounce output triggers and you can additionally lock the X axis for a one dimension simulation. Finally you can also set the overall speed of the simulation.

By controlling all of these properties you be able simulate several scenarios where the marble falls, gets gently pulled by gravity, orbits indefinitely or bounces on walls like a pinball. Truly engaging physics simulations!

Mechanical:
. Format: Eurorack
. Width: 10 HP
. Depth: 5.2 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 5v

Electrical:
. Max current: 150mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $367.87
Click for better price!
or call +44 20 7424 1960
quote 776332
ADDAC System ADDAC604 Dual Filter Module (black faceplate) ADDAC System ADDAC604 Dual Filter Module (black faceplate)
Cat: 776353 Rel: 08 Sep 20 • View all Synth modules
 
Dual filter module
Notes: Really nice stuff here. The filter circuit from ADDAC's 4 Voice Cluster module gets reimagined as a multi-mode stereo or dual mono filter module. A lot of filter action in just 6hp.

Supplier's Notes:

While developing the ADDAC105 4 Voice Cluster module, a new multimode filter to place after the summing mix stage- and the results were so postitive that it was released as a dedicated filter.

To make it more interesting, the circuitry was duplicated, to be able to use it in a stereo signal path.

To make it more versatile, a switch was added to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.
In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.
This allows immediate sync of both filter frequencies when the Stereo position is engaged.
Optionally there's a jumper in it's back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V
Read more
 2 in stock $202.23
Click for better price!
or call +44 20 7424 1960
quote 776353
ADDAC System ADDAC702 Dual VC Filter Module (black faceplate)
Cat: 776359 Rel: 08 Sep 20 • View all Synth modules
 
VC filter module
Notes: Here's our first Voltage-Controlled Variable Filter, inspired by the original MS-20 filter.

This module features:

Two independent filters, a High-Pass and a Low-Pass with dedicated audio inputs and outputs.

Besides individual outputs the HP and LP are also sent to a voltage-controlled Mix between the HP and LP filters.

Both Cutoff and Resonance are voltage-controlled with dedicated cv attenuator pots.

Switch for selecting between normal cutoff behaviour and an adjustable Smooth circuit to simulate a vactrol behaviour for cutoff control.

Switch for setting filters Filters in Parallel (independent) or Series (HP > LP).

Inspired by the Oscar synthesizer we added a Coupling switch to tie the HP Cutoff control to the LP Cutoff control, in this case the LP cutoff controls act as an offset from HP setting.

Three position switch selects different resonance clipping paths: diodes / no clipping / leds.

Both filters features a post Distortion/Fuzz circuit that adds extra harmonics adds an even deeper growl or extra gritiness to it.

All audio outputs (HP, Mix, LP) feature a switch for choosing phase output, allowing additive or subtractive mixes.

Three Leds monitor the amplitude of the three outputs (HP, Mix, LP).
Read more
MRP:$410.47
 1 in stock $395.85
Click for better price!
or call +44 20 7424 1960
quote 776359
ADDAC System ADDAC611 Gotharman's VC Tube Filter Module (black faceplate) ADDAC System ADDAC611 Gotharman's VC Tube Filter Module (black faceplate)
Notes: This module was developed upon the Tubaz Filter which was released in 2014 by Gotharman but is currently no longer in production. We loved the original module so much that we officially licensed it's circuit and expanded it to feature several new functionalities.

Here's a paragraph from Gotharman regarding the original design:
"I designed it with the purpose of adding crunch, edge and distortion to my eurorack system. It is not an ideal bandpass filter, that cuts off all frequencies above and below the center frequency.
Because of its high drive, there are, in most cases, some bleedthrough of the harmonics, that should have been cut off. You might consider calling it a "Band Add" filter. The main purpose of it, was to add edge, not to be a perfect bandpass filter."

While everything he mentions is still true we believe he was being modest, It's a dirty, gritty, growling and whining monster which promises you some of the most peculiar filter sounds you'll ever hear.
However do not classify it as a "weird" distortion unit just yet because besides this hairy character it can be easily tamed (using lower volume levels) and then, with some care and intention from the user, it will transforrm itself showing it's feline purrrrr and cuddle sweet and caring, or like any good mut, showing up at night all happy, wet and dirty from a full dog's day and will lay down at your feet while wiggling it's tail howling as yawning just happy to be back home.

As such, standard volume principles do not quite apply to these units, the Audio Levels will go up to x2 amplification, Drive will go up to x11 and master outs go up to x2. The combination of these will cover all diferent qualities it can present. Overall sound can be distorted pre-Tube (raising input levels), in Tube (raising drive) or post-Tube (raising Out levels).
Higher Inputs and Drive will always be gritty, lower Inputs and Drive volumes together with higher Output levels will make the overall behaviour more mellow and closer to what a typical filter would behave like.

No standard expectations should be considered when acquiring these units, all of the tubes were built in the 70's and were bought from various sources, we always kept the premise that no tube was a bad tube (unless not really workinng) so due to each specific characteristics no module will sound exactly the same, making each unit particularly unique. This uniqueness will be particularly evident on their resonance/self-oscilating timbre as well as in their own microphonic qualities.

Regarding power and current draw, the module is designed using a low power tube, so it won't starve your eurorack power supply.

Tech Specs:
12HP
3.5cm deep
90mA +12V
60mA -12V
Read more
MRP:$354.97
 1 in stock $352.81
Click for better price!
or call +44 20 7424 1960
quote 776355
ADDAC System ADDAC301 Floor Control Module (red faceplate)
Cat: 776281 Rel: 08 Sep 20 • View all Synth modules
 
Floor control module
Notes: While ADDAC were working on the new VC Stompboxes several expression pedals were tested and it became clear that most often, while playing a modular system, your hands are busy.
It's also normal to have an expression pedal lying around somewhere, so ADDAC have brought these back, cleaned up the dust and put them to good use.
This module allows the connection of any standard expression and sustain pedal.

The expression pedal action can be fine-tuned with Range and Offset knobs.
Range defines the voltage range (-10v, +10v).
Offset transposes the range by (-5v, +5v).
Two leds, plus and minus, monitor the CV Output
Positive and inverted output jacks.
The sustain pedal action will generate a gate signal on the gate output.
One led monitors this output.
The module also features a bus board +5v Adaptor, this will be able to provide +5v to any bus board.
This feature can be removed through a jumper on the back of the module.

Specs:
- Width: 4 HP
- Depth: 4 cm
- Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $78.52
Click for better price!
or call +44 20 7424 1960
quote 776281
ADDAC System ADDAC302 Nchunk Control Module (red faceplate)
Cat: 776295 Rel: 08 Sep 20 • View all Synth modules
 
Control module
Notes: The ADDAC302 Nchunk Control module allows you to connect a Nintendo Nunchuck controller to your modular synth, featuring a two-axis thumb joystick, a three-axis accelerometer and two trigger buttons.

The module provides CV outputs for all of the Nunchuck's parameters and special functions to remap the CV outputs. The remapping can be both continuous or step-by-step and can be accessed through either the dedicated CV inputs or the manual controls.

A specially dedicated Mix output averages between the first two CV outputs, a very useful feature for continuous control parameters.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 4 cm

Control Voltage I/O:
- CV inputs: 0 - 10v
- CV outputs: 0 - 5v
- Gate in threshold: 2.5v

Electrical:
- Compatible with +-12v and +-15v power supplies
. Max current: 100mA?
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $278.59
Click for better price!
or call +44 20 7424 1960
quote 776295
ADDAC System ADDAC222 4x6 Voices 1V/Octave to MIDI Notes Module (red faceplate)
Notes: Most recent from the ADDAC MIDI Series, the 222 converts 4 CV inputs to four distinct polyphonic MIDI NOTES streams, with up to 6 note voices per input. This allows the user to send midi notes to external midi devices straight from your modular: just plug it into your classic synth or your favourite virtual instruments. Combined with the ADDAC221 you can fully control any external midi device.

Ships with 2 stereo jack to din5 midi cables.
Read more
 1 in stock $401.22
Click for better price!
or call +44 20 7424 1960
quote 776268
ADDAC System ADDAC402B Heuristic I/O Expansion Module (red faceplate) ADDAC System ADDAC402B Heuristic I/O Expansion Module (red faceplate)
Cat: 776312 Rel: 08 Sep 20 • View all Synth modules
 
MIDI expansion module
Notes: ADDAC402B MIDI Expansion allows full I/O Midi control of ADDAC402 plus access to a powerfull midi interface, with:

Midi Sync:
Allows the module to synchronize with any external MIDI device’s Clock, including transport messages like play, stop and continue.

CV to MIDI:
5 CV inputs (Fills 1 to 4 and Assign) to MIDI Notes and/or CC messages, the Note and CC number can be independently configured via the Configuration Menu.
These CV inputs can be sent on independent MIDI Channels, for ex: Fills 1 to 4 on MIDI Channel 1 and Assign on MIDI Channel 2.

MIDI Controller:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be sent to MIDI Out as CC controls as any standard MIDI controller. The individual CC numbers can be configured through the Configuration Menu.

MIDI to Gate:
All 4 Gate outputs can be controlled/sequenced from an external MIDI device.
For ex: we can configure Gate 1 to be responsive to CC 1, Gate 2 to CC 2 and so on. Everytime CC 1 gets a value of 127 Gate 1 will be turned ON, if it gets a 0 value Gate 1 will be turned OFF.

MIDI Control:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be controlled/sequenced from MIDI CC controls. This allow full automation of the module via MIDI
The individual CC numbers can be configured through the Configuration Menu and includes a midi learn feature for easier configuration.
Also controllable via MIDI is the change of Presets and Modes.
Read more
MRP:$111.01
 1 in stock $107.56
Click for better price!
or call +44 20 7424 1960
quote 776312
ADDAC System ADDAC221 10x9 Channel CV to CC MIDI System Module (red faceplate)
Notes: The ADDAC221 is a standard midi controller that allows CV inputs, converting CV variations to MIDI Control Change Messages. This allows interaction with your favourite standalone synthesisers and softwares through simple plug-and-play midi control.

A dedicated software permits the user to store up to 9 different presets, where the CC values of each channel can be configured as wished.

This way the user can preset his favourite synths to control filters, envelopes and whatnot from CC messages coming from the module CV inputs.

Ships with 2 stereo jack to din5 midi cables.
Read more
 1 in stock $357.11
Click for better price!
or call +44 20 7424 1960
quote 776266
ADDAC System ADDAC208 Comparator & Rectifiers Module (red faceplate)
Cat: 776183 Rel: 08 Sep 20 • View all Synth modules
 
Comparator module
Notes: A Comparator is an electronic circuit that compares two voltages and switches its output to indicate which is larger. The Comparator operates between -10 or +10V

The Output is always -10V if below Threshold and +10V if above Threshold.

A Rectifier is an electronic circuit that is used to transform AC signals to an equivalent DC signal while removing one of it's polarities, i.e. Positive rectification excludes negative signals and vice-versa.
Both sections can be used to change the shape of any waveform as well as its harmonic content.

FRONTPANEL:
1 Comparator Threshold Knob
1 Comparator Jack Output
2 Comparator Monitor Led1 Common Signal Jack Input
4 Rectificated Outputs

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $133.38
Click for better price!
or call +44 20 7424 1960
quote 776183
ADDAC System ADDAC807A+ Individual Channel Stereo Outputs Module (black faceplate)
Notes: Dedicated expansion for the ADDAC807 VC Summing Mixer

Features 5 individual track post fader stereo outputs.

6HP
2 cm deep
0mA
Read more
 1 in stock $89.27
Click for better price!
or call +44 20 7424 1960
quote 776667
ADDAC System ADDAC111 Ultra .WAV Player Module (red faceplate) ADDAC System ADDAC111 Ultra .WAV Player Module (red faceplate)
Cat: 776121 Rel: 08 Sep 20 • View all Synth modules
 
.wav player module
Notes: The ADDAC111 ULTRA .WAV PLAYER is the long awaited upgrade to the praised ADDAC101 .WAV PLAYER.

While keeping all functions of the original, there's more dedicated controls as well as a few new functions.

For this version, Micro SD Cards were used- this decision was made in order to help the hardware construction and make it only 3cm deep.

An Expansion module, ADDAC111B, was also created to allow users to recall the first 8 files through dedicated trigger signals. This allows sequencing of files.

The Loop Size, Start Point and Sample Rate defines how the loop is played.

Loop Settings defines if sample is looping or playing only once.

File Access if it advances to the next or previous file.

The VCA section controls the overall volume of the module.

And finally the Envelope Follower generates a CV voltage related to the amplitude of the audio signal pre-VCA.
Read more
MRP:$622.17 SAVE 19%
 2 in stock $501.26
Click for better price!
or call +44 20 7424 1960
quote 776121
ADDAC System ADDAC701.REV2 VCO Module (black faceplate) ADDAC System ADDAC701.REV2 VCO Module (black faceplate)
Cat: 776357 Rel: 08 Sep 20 • View all Synth modules
 
VCO module
Notes: This is our new VCO, we discontinued our ADDAC701 VCO a few years back and since we've been wanting to release a more stable version with better pitch tracking increasing pitch reliability further minimizing the detuning issues of analog VCO's.

For this new revision we chose to use the modern version of the CEM3340 ic from CoolAudio and add the triagle to sine circuitry of our previous VCO. This new version is extremelly stable over 7 octaves.

We also added a new Mix section which allows mixing of all waveforms controlled by 3 knobs SIN/TRI, MIX and SAW/RECT.

Tech Specs:
8HP
3.5 cm deep
60mA +12V
60mA -12V
Read more
MRP:$178.13
 1 in stock $176.41
Click for better price!
or call +44 20 7424 1960
quote 776357
ADDAC System ADDAC204 VC CV Mapping Module (red faceplate) ADDAC System ADDAC204 VC CV Mapping Module (red faceplate)
Cat: 776178 Rel: 08 Sep 20 • View all Synth modules
 
CV mapping module
Notes: With the VC mapping module you'll be able to scale your voltage and also control its offset via CV.

This module provides two outputs for normal and inverted output voltages. A third output morphs between the normal and inverted outputs.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 10v

Electrical:
. Compatible with +-12v and +-15v power supplies?
. Max current: 40mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $201.15
Click for better price!
or call +44 20 7424 1960
quote 776178
ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate) ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate)
Notes: The ADDAC111B EXPANSION allows the user to access the first 8 files (a to h) through a trigger.

Files do not play simultaneously, if several triggers happen at the same time top priority goes from top to bottom- meaning that if B E and F triggers are received at once the file that will be played is file B.

The expansion module should be plugged to the back of the Ultra .Wav Player module. There's no connection to the bus boards.

Specificaitons:
Mechanical:
Format: Eurorack
Width: 16 hp
Depth: 3 cm

Control voltage i/o:
CV inputs: i 5v
CV outputs: 0 +10v

Electrical:
Max current: 150ma
Compatible with +-12v and +-15v power supplies
Bus board cable: 8x2 idc (doepfer style) connect
Read more
 1 in stock $133.38
Click for better price!
or call +44 20 7424 1960
quote 776125
ADDAC System ADDAC602 Passive Ring Modulator Module (red faceplate)
Cat: 776350 Rel: 08 Sep 20 • View all Synth modules
 
Ring modulator module
Notes: A dual channel classic Passive Ring Modulator, with transformers and germanium diodes.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 3.5 cm

Electrical:
- Passive
Read more
MRP:$132.95
 1 in stock $126.92
Click for better price!
or call +44 20 7424 1960
quote 776350
ADDAC System ADDAC805.VS2 VC Signal Router Module (black faceplate) ADDAC System ADDAC805.VS2 VC Signal Router Module (black faceplate)
Cat: 776432 Rel: 08 Sep 20 • View all Synth modules
 
Signal router module
Notes: Inspired by our ADDAC701 VCO waveform mixing section, our new VC Signal Router also updates our legacy X-Fade/Panner to a stereo configuration that also allows 4 quadrant mixing.

Featuring two dedicated X-faders and a stereo VCA that can also be used as a third X-Fader. All controls have their own CV inputs and dedicated Attenuverters for precision control.

4 quadrant mixing is achieved by using the stereo Master as a X-fader between left and right channels, this way you can plug 4 audio sources and sweep/crossfade between each and any of them using the 3 x-faders. Plug any 4 sources (4 waveforms of a VCO, 4 LFOs, 4 envelopes...) and sweep through morph through or have them all mixed together.

For other configuration types Left and Right X-fader channels can be routed through the Master stereo VCA or sent directly to the outputs. A stereo Direct input can also be routed through the Master VCA or sent straight to the outputs.

The Mono Sum output always mix Left and Right outputs together allowing the possibility to use the module as a peculiar 6 channel mono mixer.

It can be used for both Audio or CV Signals.

Tech Specs:
8HP
4.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$178.13
 1 in stock $176.41
Click for better price!
or call +44 20 7424 1960
quote 776432
ADDAC System ADDAC803 Quadraphonic Spatializer Module (red faceplate)
Cat: 776406 Rel: 08 Sep 20 • View all Synth modules
 
Quadophonic spatializer module
Notes: This is ADDAC System's Quadraphonic output module.

Using the VBAP (Vector-Base Amplitude Panning) principle, it allows to position a mono signal over a quadraphonic speaker array for sound spatialization. The VBAP algorithm can be controlled by Cartesian or Polar methods

Sound path is fully analogue featuring 4 high quality VCA's.

Featuring both 1/4 inch and 3.5mm jacks for adapter free connections.

Four 16 bit CV outputs mirror the signal sent to the VCA's control, when connected to 4 external VCA's these can be used for Polar Mixing of 4 diferent sound sources.

The 2 Filter CV outputs react according to the distance from the center point. The + output increases as the sound gets further away from the center of the room allowing to sync a Low Pass Filter to the input sound so that as it moves away from the center the High Frequencies get attenuated further increasing the spatialization experience. Another good practice would be to sync a reverb dry/wet signal as well so that the sounds gets more difused as it moves away from the center into the horizon.

Both the filter and the reverb should be plugged between the sound source and the 803, in order for the incoming sound to be processed before being routed to the 4 outputs.

The X and Y CV outputs mirror the cartesian sound position between 0 and +5v.

Mechanical:
. Format: Eurorack
. Width: 14 HP
. Depth: 6 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: + 5v

Electrical:
. Compatible with +-12v and +-15v power supplies?.
. Max current: 150mA on positive rail, 100mA on negative rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $445.31
Click for better price!
or call +44 20 7424 1960
quote 776406
ADDAC System ADDAC800X High-End Outputs Module (red faceplate) ADDAC System ADDAC800X High-End Outputs Module (red faceplate)
Cat: 776392 Rel: 08 Sep 20 • View all Synth modules
 
Outputs module
Notes: Inspired by the legacy designs of premium vintage gear, the ADDAC800X behaves like a high-quality DI box and is all about keeping the sound coming from your Modular free from any undesired noisy interferences, making sure that what you're getting from your outputs is what your Modular is actually producing. It provides galvanic electrical isolation between the Modular system and external sources preventing impedance mismatch and ground loop induced hum. ADDAC's 800X circuit is designed around a unity 1:1 type nickel core Hammond Audio Transformer from the 140UEX series (equivalent to Jensen audio transformers).

Operating in the 20 Hz to 20 KHz range and providing exceptional shielding from external sources, this impedance matching transformer provides the 800X with two fully balanced high-end outputs (via XLR connectors).

Applying a transformer balanced output isolation has lots of advantages over other less expensive ways for dealing with ground loop issues. This method provides the chance to set a very simple and clean circuit in which the signal transfer process develops smoothly and humming free. The transformer is a device that performs both signal balancing and high-to-low (or vice-versa) impedance conversion, while rejecting straggled DC voltage and Radio Frequency Interference from signal passing through a magnetic bridge. In a transformer, two (or more) coils (called windings) of insulated wire wound around a magnetic metal core allow for its input(s) and output(s) not to be physically connected together. When an AC signal passes through the input winding (the primary), a perfectly related AC signal appears on the output winding (the secondary). This way, by the fact that signal flows via inductive coupling between the two windings of the transformer, the ADDAC 800X presents a most accurate electrical isolation between its input and output. A same number of windings on each coil guarantees that there's no gain loss when audio signal passes from the primary to the secondary windings. Furthermore, since these two windings are insulated from each other, the transformer will electrically isolate the 800X from any other device, preventing hum problems coming from an outsider ground.

LEFT IN will output sound to both channels.
Through RIGHT IN, signal will only find its way on OUT 2 (if the LEFT/RIGHT toggle is lifted up, RIGHT IN will be ignored and LEFT IN will be present in both OUTs). With both INs connected you'll have two separate outputs (LEFT IN -> OUT 1 & RIGHT IN -> OUT2). However, lifting up the LEFT/RIGHT toggle you'll also find RIGHT IN ignored and LEFT IN will fed both OUTs.

Each TRANSFORMER ISOLATED OUTPUT section has its signal overload warning led and two dedicated toggle switches: one that works as a simple amplifier / attenuator pad to +6dB / -10dB respectively, and a LIFT/FLOAT/GND toggle. This last one is a 3-way selector that lets you choose between lift, ground or floating ground (toggle's middle position) to be taken as reference for the ground point. In the LIFT position the module circuit will be lifted to ground through a 100R resistor and a 10nF capacitor and pin 1 of the XLR connection will act as the ground point. Choosing GROUND will put ground to be shared between inputs and outputs. Floating ground will leave ins and outs grounds completely apart from each other. Any of these three positions may be the best form of avoiding ground loops or any other undesired interference occurring between your modular and the sound system you're plugging it into. Try out which one of this options will work the best in a given situation.

An HEADPHONES AMPLIFIER (with VOLUME knob) connection is available for quietly working with your modular or pre-listen your sounds before making them public matter in a live situation. This section features an OPA2134 High-Performance Audio Operational Amplifier. This device presents the ideal characteristics for use with an headphones set, like ultra-low distortion and low-noise fully specified for audio applications, in combination with high-output drive capability and excellent DC performance that altogether allow for high-dynamic headroom and really superior sound quality.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 6.7 cm

Electrical:
. Max current: 100mA? on each rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $445.31
Click for better price!
or call +44 20 7424 1960
quote 776392
ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate) ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate)
Cat: 776437 Rel: 08 Sep 20 • View all Synth modules
 
Pre-amp module
Notes: The Phono Pre Amplifier module- connect your turntable to it and bring it's sound straight into any of your patches.

Specs:
- Width: 4 HP
- Depth: 4.5 cm
- Current: 40mA
Read more
 1 in stock $133.38
Click for better price!
or call +44 20 7424 1960
quote 776437
ADDAC System ADDAC812VU Audio Meter Module (black faceplate)
Cat: 776439 Rel: 08 Sep 20 • View all Synth modules
 
Metering module
Notes: Stereo/dual VU metering module with buffered thru outputs for each channel.

An additional switch turns the beautiful lamps behind the VU meters off, in case your rack is running low on power!

A couple trimmers on the back of the module allows the user to define the VU range of each channel independently.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 3.5 cm

Electrical:
- Max current with lamps on: +100mA/-10mA
- Max current with lamps off: +10mA/-10mA
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $145.20
Click for better price!
or call +44 20 7424 1960
quote 776439
ADDAC System ADDAC807C VC Stereo Mixer Expansion Module (black faceplate) ADDAC System ADDAC807C VC Stereo Mixer Expansion Module (black faceplate)
Cat: 776436 Rel: 08 Sep 20 • View all Synth modules
 
Mixer expansion module
Notes: The ADDAC807 VC Stereo Summing Mixer can provide up to 9 stereo channels of supreme Eurorack audio.

The main modules ADDAC807A and ADDAC807B can be expanded via the ADDAC807C Expansion Console for 4 additional stereo channels.

MECHANICAL:
Format: Eurorack
Width: 38 HP
Depth: 4.5 cm
Weight: 0.6 kg (1.3 lb)

CONTROL VOLTAGE I/O:
CV inputs: i 5v

ELECTRICAL:
Max current: 250mA on each rail
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $669.06
Click for better price!
or call +44 20 7424 1960
quote 776436
ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate) ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate) ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate) ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate)
Notes: All you could ever dream of from an Eurorack console, and then some.

The ADDAC807A VC Stereo Summing Mixer offers you the power, the flexibility and the gorgeous layout of a high-end audio console, in the popular Eurorack format. Starting off at 5 stereo channels, with the option to add 4 additional stereo channels via the ADDAC807C Expansion Console, its send/return options and clever matrix will ensure you have that perfect mix down in seconds. Customary to ADDAC System designs, there is enough CV control and hands-on switch options to make the ADDAC807A into an instrument in and of itself.

The ADDAC807A is accompanied by its sibling, the ADDAC807B Inputs Console. We decided to allow the user to freely define the placement of the jacks by separating the area where all your cables are located. Less clutter means more hands-on control and higher playability. The ADDAC807B Inputs Console holds all the jack inputs for the ADDAC807A Main Console, along with CV inputs and additional channel settings cause you can never have enough switches.

MECHANICAL:
Format: Eurorack
ADDAC807A Width: 56 HP
ADDAC807B Width: 24 HP
Depth: 4.5 cm
Weight: 1.5 kg (3.3 lb)

CONTROL VOLTAGE I/O:
CV inputs: i 5v

ELECTRICAL:
Max current: 650mA on each rail
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $1,573.69
Click for better price!
or call +44 20 7424 1960
quote 776434
Items 1 to 42 of 42 on page 1 of 1

Filter

Saved Searches
Save current search
Release Date
Featured
Close