100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 25 of 25 on page 1 of 1
Cat: 731947 Rel: 10 Jun 19
 
Compact 4-channel mixer - 4HP
Notes: Module A-138n is a simple four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator available. The output is twice available (two sockets, hard-wired like a multiple).

The module is the slim version of module A-138a and offers nearly the same features. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-138a. The module is primarily planned for applications where only limited space is available. The only functional difference compared to the A-138a is the missing attenuator for the (dual) output.
Read more
 3 in stock $47.99
Click for better price!
quote 731947
Cat: 577779 Rel: 14 Jun 19
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
 1 in stock $35.99
Cat: 719701 Rel: 02 Sep 19
 
Dual hybrid oscillator
Notes: The 2OSC/d module contains two 1V/octave hybrid oscillators. Each of them features:

- One frequency knob plus a range switch +2 octaves
- CV input (1V / octave)
- PWM input
- SYNC input
- Sawtooth/Square/Sub-octave output

The pulsewith knob controls either the pulsewidth of the first oscillator (with the second one having a fixed pulsewidth), or via a switch the second oscillator is also controlled by the pulsewidth knob. Both oscillators can be pulsewidth-modulated independently by their PWM inputs.

The module is designed as a hybrid digital/analogue module; the oscillator frequencies are determined digitally and are therefore quite stable and have a good tracking; the output wavefom itself is created analogue. It's a new idea/concept that I have implemented here; the design causes the waveform to get a bit gritty at higher frequencies (but not "digital noise") - it's the character of this thing!
Read more
 2 in stock $47.17
Click for better price!
quote 719701
Cat: 719686 Rel: 02 Sep 19
 
Classic wavefolder for the AE system
Notes: This module is based on a design used also by Ken Stone for his CGS system; the original circuit dates back to a publication from 1973.

Basically, the WAVEFOLDER clips and folds the incoming waveform; usually, waveforms with little overtones (like triangle or sinewaves) are used as input. In general, by the clipping and folding, the signal enriches the input signal with more overtones.
Read more
 1 in stock $34.85
Cat: 577786 Rel: 06 Jun 19
 
Multi-connector module - 4HP
Notes: Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very "primitive" they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned. The function of A-180-1 and A-180-2 is the same. The modules differ only in the front panel width.

For the distribution of control voltages used for pitch control of several VCOs the buffered multiple A-185-2 is recommended. This module has a built in buffer (and a lot of additional features like CV summing) that avoids small voltage losses that may be heard in pitch control applications.
Read more
 1 in stock $37.06
Cat: 719678 Rel: 02 Sep 19
 
Audio mixer with 4 inputs
Notes: This module consists of an audio mixer with 4 inputs and their level knobs, plus an additional 4 separate inputs that are mixed at full level (especially for mixing CV signals), and a separate output.
Read more
 1 in stock $28.15
Cat: 719694 Rel: 02 Sep 19
 
LFO module
Notes: The LFO module generates modulation voltages mostly below the audio range; this module offers:

- PWM modulation for the Pulse out
- RATE knob for controlling the frequency
- SLOW/FAST switch for two frequency ranges; with FAST the rate can go into the lower audio range
- Triangle/Sawtooth switch; changes the waveform of the output
- PULSEWIDTH knob, this sets the pulsewidth of the according output
- Control LED for sawtooth/triangle and for pulse
- Three separate output signals: Square (even duty cycle), TRIANGLE/Sawtooth, Pulse
Read more
 3 in stock $31.09
Cat: 719670 Rel: 02 Sep 19
 
Dual attack/decay envelope
Notes: 2ENV is a dual attack - decay envelope; it can be switched between full sustain (the output remains at full level as long as the GATE input is on) and zero sustain (for percussive envelopes). Another switch (SLOW/FAST) allows selecting the time range.

For manual triggering there is a button for each envelope.

CV control: Both attack and decay time can be CV controlled; the CV "multiplies" the time by 1...approx. 8 times.
Read more
 2 in stock $45.03
Click for better price!
quote 719670
Cat: 719685 Rel: 02 Sep 19
 
Lowpass gate module for AE modular
Notes: The LOPAG is the lowpass gate module for AE. It is based on a Vactrol (like all good lowpass gates) and has two inputs: IN (audio signal) and TRIG. A pulse on the TRIG input opens the signal path shortly and via the characteristics of the Vactrol the audio signal is filtered and attenuated in a plucked, percussive way. Additional GATE and CV inputs allow more control over the way the module works.
Read more
 2 in stock $37.80
Cat: 719658 Rel: 02 Sep 19
 
Stereo headphone amplifier
Notes: A stereo headphone amplifier for AE modular.

It has separate left/right inputs; via a switch it can be set to mono operation (only left input is used). One common volume control for both outputs.

Two headphones can be attached via 3.5mm stereo minijack sockets.
Read more
 2 in stock $37.52
Cat: 719659 Rel: 02 Sep 19
 
Mono delay module
Notes: This module is a standard mono delay with the usual parameters:

- Delay time
- Feedback
- Dry/wet mix

It sounds not as clean and polished as a usual digital delay but has quite a character on its own. High feedback settings allow endless and distorting loops.

(For the techies: It is based on the well-known PT2399 chip.)
Read more
 1 in stock $39.14
Cat: 719665 Rel: 02 Sep 19
 
Sample & Hold module
Notes: The purpose of the SAMPLE&HOLD module is to "freeze" the input voltage with a trigger input.

Typically used for random CV patterns if a noise signal is fed to the input and triggered e.g. by an LFO.
Read more
 2 in stock $29.49
Cat: 719689 Rel: 02 Sep 19
 
Versatile mixer/quadattenuator
Notes: 4ATTMIX offers four input channels which can be level controlled / attenuated by the corresponding knobs. The attenuated signals are sent to four outputs.

Additionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.

An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.
Read more
 2 in stock $36.45
Cat: 719693 Rel: 02 Sep 19
 
Classic VCO for AE modular
Notes: The VCO module is a "classic" VCO featuring:

- Two CV inputs 1V/octave
- MODulation input with Level-knob, switchable to frequency or pulsewidth
- PWM input
- Coarse/Fine knob for frequency
- Pulsewidth knob for squarewave
- Square/Triangle/Sawtooth output

The module works well if you need an oscillator for primary musical/melodic use.
Read more
 1 in stock $39.67
Cat: 719673 Rel: 02 Sep 19
 
Clock divider module
Notes: The BEAT DIVIDER takes a clock signal (the BUS CLK which presents the MIDI clock from the MASTER module) and divides it to musical clock dividers, selectable from 1/2... 1/32.

Additionally, a second output provides the dotted or triplet clock of the selected divider value.
Read more
 1 in stock $28.15
Cat: 719663 Rel: 02 Sep 19
 
Dual audio & CV level attenuator
Notes: 2ATT/CV contains two units of a simple level attenuator for any kind of signal. You can also switch to voltage mode and get manually controllable CV on the outputs.
Read more
 1 in stock $29.49
Cat: 719656 Rel: 03 Sep 19
 
State variable filter
Notes: This module is a classic state variable filter.

It offers the control knobs cut-off frequency, resonance and CV attenuator; two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter, this module has a significant self-resonance, and also a very quick response to cut-off frequency changes.

Three different outputs provide lowpass, bandpass and high-pass output.
Read more
 1 in stock $37.52
Cat: 719657 Rel: 02 Sep 19
 
Filter module
Notes: This filter module is a variant of the Wasp filter, a quite strange circuit used first in the EDP Wasp synth end of the seventies, which abuses digital chips in an analogue way leading to the characteristic sound of this filter type. In this module, vactrols are used for controlling the filter frequency.
Read more
 2 in stock $38.59
Cat: 719682 Rel: 02 Sep 19
 
Dual NAND, AND, XOR inverter
Notes: The LOGIC module combines two inputs by different logical rules (AND, NAND, XOR). This can be used either for operations on trigger/gate signals (let gate signals pass depending on other signals, invert them depending on the other input etc), or for audio signals, where you get ringmodulator-like sounds when feeding two different oscillator frequencies.
Read more
 1 in stock $25.47
Cat: 719687 Rel: 02 Sep 19
 
4 minijack inputs/outputs
Notes: 4I/O offers four minijack sockets that are connected to the AE sockets for connecting external audio sources, CV's and Eurorack modules. Sockets 1 and 3 are stereo sockets; if a stereo cable is inserted here the signal is available on sockets 1/2 and 3/4. With mono cables the four sockets can be used independently.

All sockets have an overvoltage protection (as AE modular is limited to 5V) and can be switched between audio and DC/CV signals.
Read more
 2 in stock $39.14
Cat: 719668 Rel: 03 Sep 19
 
Dual voltage controlled amplifier module
Notes: 2VCA contains two separate VCA (voltage controlled amplifiers); the classic module to shape the volume of a sound that is fed to IN by a control voltage, e.g. from an ENV to the CV input.

A switch determines the operation mode (DC/CV or audio), choosing the right position can reduce/avoid pop's with short attack envelopes.

An additional knob for each VCA attenuates the level, if necessary.
Read more
 2 in stock $31.09
Cat: 719661 Rel: 02 Sep 19
 
Binary divider for incoming signals
Notes: A binary divider for incoming signals. It can be used either for dividing clock signals (e.g. from an LFO, BEATDIVIDER) by 2 / 4 / 8... 128 for rhythmical purposes but also for audio signals - in this case you get subharmonics/lower octaves squarewaves at the outputs, which can be mixed or used separately.

The reset input resets all output signals; in case of audio signals this can get quite unique, ringmodulator-like sounds.
Read more
 2 in stock $37.52
Cat: 751441 Rel: 17 Sep 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


KICK is a pure analogue Kick drum of raw bass power.

It has three knobs: PITCH for the overall pitch of the sound; with DECAY the length of the sound can be set and with DRIVE a nice distortion can be added to the sound.

With the pitch decay switch the pitch follows the amplitude, giving a bit different character.

And a trigger button is available to check the sound without an external trigger signal.
Read more
 1 in stock $33.01
Cat: 714701 Rel: 19 Dec 18
 
Self-powered white noise generator
Notes: This cable expands every synth without a noise generator but an external audio input and a 5V source at the tip of a socket (e.g. an expression pedal input) and gives you digital noise. Initially the cable has been developed as an expansion for the Moog products Little Phatty and Minitaur but it works also with other synths etc. The Hirlostek needs to be provided with a 5V voltage, for instance at the tip of a expression pedal socket. A circuit inside of the bigger plug generates a bright digital noise you can use as audio or modulation source. The narrower plug carries the noise signal and is to be connected either with an audio input or a CV input. Hand made, military quality due to good Neutrik jacks.
Read more
 1 in stock $48.24
Click for better price!
quote 714701
Cat: 714698 Rel: 19 Dec 18
 
Self-powered white noise generator
Notes: This cable expands every synth without a noise generator but an external audio input and a 5V source at the tip of a socket (e.g. an expression pedal input) and gives you digital noise. Initially the cable has been developed as an expansion for the Moog products Little Phatty and Minitaur but it works also with other synths etc. The Hirlostek needs to be provided with a 5V voltage, for instance at the tip of a expression pedal socket. A circuit inside of the bigger plug generates a bright digital noise you can use as audio or modulation source. The narrower plug carries the noise signal and is to be connected either with an audio input or a CV input. Hand made, military quality due to good Neutrik jacks.
Read more
 2 in stock $39.67
Items 1 to 25 of 25 on page 1 of 1

Filter

Saved Searches
Save current search
Release Date
Featured
Close