100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 87 on page 1 of 2
1  2  »
2hp
Cat: 727385 Rel: 02 Oct 19 • View all Synth modules
 
High fidelity audio processor focused on granular synthesis
Notes: 2hp Grain is a high-fidelity audio processor focused on granular synthesis. It's capable of generating granular clouds, microsound phrases, and unique textures that are derived from any input signal. The Density control sets the rate of granularization applied to the input signal and sets its position within the buffer. The Mix control sets the balance between live input and the granular audio stream for dialling in the perfect combination of sounds. In addition, there is a frequency control and associated v/oct input allowing for pitch accurate sequencing of grains. Particle patching has never been smaller with Grain.
Read more
 1 in stock $157.97
Cat: 717580 Rel: 06 Feb 19 • View all Synth modules
 
Four channel stereo mixer with line-level, modular-level & headphone outs
Notes: The Listen Four is a four channel stereo mixer with line, modular, and headphone outputs. Two mono channels with Pan knobs and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. The Listen Four can be daisy-chained to other Listen modules to create a larger mixer with sub-mix outputs.
Read more
 2 in stock $191.52
Cat: 725517 Rel: 12 Apr 19 • View all Synth module accessories
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 4 in stock $155.81
Cat: 711005 Rel: 12 Dec 18 • View all Synth module accessories
 
60HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 is 60HP with 1.34" (34mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod60 includes twenty (20) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 2 in stock $159.06
Cat: 717581 Rel: 06 Feb 19 • View all Synth modules
 
Four channel stereo mixer with balanced 1/4-inch & headphone out - 12HP
Notes: The Listen Four Quarters is a four channel stereo mixer with 1/4" (6.35mm) TRS balanced outputs and 1/8" (3.5mm) headphones output. Two mono channels with Pan knobs and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. The Listen Four Quarters can be daisy-chained to other Listen modules to create a larger mixer with sub-mix outputs.
Read more
 1 in stock $182.86
Cat: 708115 Rel: 22 Jan 19 • View all Synth modules
 
MiniMod Glide + Noise, combining two Minimoog circuits in one module - 6HP
Notes: The original MiniMod Glide +Noise module was based exactly on the original Minimoog Model D circuitry, which was designed to be used with the built in Model D keyboard, and because of its vintage design its range was severely limited to 5 or 6 octaves, and it also responded to positive voltages only. Another limitation was that it would not return fully to zero when selecting long glide times, which restricted the range even more.

So we made the decision to re-design the MiniMod Glide + Noise using modern precision parts, and we have come up with an all new circuit which has exactly the same function, but with a hugely extended range. It has the same Glide slope characteristic (a slightly curved Linear Glide) as the Model D on which the MiniMod is based, however in response to many requests from customers we have adjusted the glide up and down speeds so that they are now very similar , which is much more useful in real world applications that the earlier MK1 version which (like the Model D) would glide up considerably faster than it would glide down.

The new Mk2 MiniMod Glide Noise module now has an impressive 14 octave range, and can respond to negative voltages down to -5V. This is a very useful feature, as our MiniMod VCO's will respond to negative control voltages and produce correspondingly low frequencies; so it is now possible to glide down quickly or slowly to crazy sub bass levels! The hold feature has been improved too, it covers the full audio range as well as DC control voltages, and works as a track and hold module with Eurorack signal levels.

A further enhancement is that the Mk2 module can now (using selectable jumpers) transmit or receive pitch CV to the Eurorack power bus; for example, the Glide CV Output can now be directed to the Bus in order to send CV's to (for example) three VCO's via the bus without the need for a passive multi and four patch cords!

The Noise section of the module is unchanged, except that we have slightly boosted the level of the Red Noise output to bring it more in line with Eurorack control voltage levels.

Lastly, it is much shallower - Mk1 Glide Noise had a depth of 54mm, and it was the only MiniMod module that was too deep to fit a skiff style case - and this prevented a full MiniMod system being installed into a shallow Eurorack case. The new MK2 version is only 28mm deep, so this allows both it and a full MiniMod system to be mounted into shallow skiff style Eurorack cases.

Dimensions: 6HP wide, 26mm Deep
Current draw: 36mA Positive, 38mA Negative
Read more
 1 in stock $183.94
Cat: 714519 Rel: 25 Jan 19 • View all Synth modules
 
Gritty sounding delay effect with open feedback path - 10HP
Notes: The Coma Reactor module from Animal Factory Amplification is an innovative delay with a variety of sonic possibilities.

It is based on a PT2399 delay chip and offers amazing routing and sound design options.

The Coma knob is an attenuator for the input signal. Low levels can generate funny noises. The input signal is mirrored at the Thru output, for further processing with another module.

There are separate dry and wet potentiometers to adjust the desired effect amount.

The delay time ranges from 30 to 2000 ms. It can be controlled manually via the Time knob or with control voltage thanks to the MOD input, which is equipped with an attenuverter and a switch for setting the amount of modulation. Furthermore there is a LED which indicates the CV polarity.

The delay features a feedback knob for controlling the repeats. Turned fully clockwise it will bring up self-oscillation.

Thanks to an integrated send/return path it is possible to use the module with external effects. The volume of the external effect is controlled by the Return potentiometer. If nothing is connected to send/return, the delay signal is routed internally through a crude twin-T Bandpass Filter. The effected signal can be fed back into the delay circuit thanks to a dedicated Return Feedback knob.
Read more
 2 in stock $174.20
Cat: 711948 Rel: 10 Jan 19 • View all Synth modules
 
Compact four-channel morphing vector mixer & quadraphonic panner for modular setups - 6HP
Notes: The V3KT is a 6HP, 4-channel morphing vector mixer/quadraphonic panner with dedicated CV logic outs!

V3KT makes it very easy to animate vector mixes/synthesis, dynamic quadraphonic panning, or automate distribution of a signal through quad high-quality VCA channels. With easy operation and dedicated CV logic outs that can be fed back into your patch, it is truly an instantly inspirational piece of kit!
Read more
 1 in stock $194.76
Cat: 742281 Rel: 08 Aug 19 • View all DJ cartridges
 
AT-XP7 cartridge pre-mounted on the AT-HS6BK headshell
Notes: The AT-XP series cartridges provide a high-quality sound for vinyl DJ's. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

- Audiophile DJ cartridge AT-XP7 pre-mounted on the AT-HS6BK headshell
- VM dual magnet construction
- Durable robust design for high-quality specialist DJ playback
- Tapered aluminium cantilever providing outstanding rigidity
- Compatible with the replacement styli ATN-XP3 and ATN-XP5 as well
- Configuration with single cartridge (AT-XP7). The replacement stylus (ATN-XP7) and a headshell bundle, consisting of the replacement stylus and the headshell AT-HS6BK (AT-XP7/H) are available separately
Read more
 4 in stock $172.05
In Nomine Satanas: 40 Years In Sodom (limited coloured 8xLP box set + custom-shaped 7" picture disc + 40 page hard-back book + tour program + patch + poster)
BMG
Cat: 405053 8411157. Rel: 31 May 19
Metal
  1. Sons Of Satan (LP1: Welcome To Hell) (3:35)
  2. Welcome To Hell (3:12)
  3. Schizo (3:31)
  4. Mayhem With Mercy (0:53)
  5. Poison (4:29)
  6. Live Like An Angel (Die Like A Devil) (3:54)
  7. Witching Hour (3:36)
  8. One Thousand Days In Sodom (4:32)
  9. Angel Dust (2:37)
  10. In League With Satan (3:29)
  11. Red Light Fever (5:04)
  12. Black Metal (LP2: Black Metal) (3:43)
  13. To Hell & Back (3:03)
  14. Buried Alive (0:27)
  15. Raise The Dead (6:31)
  16. Teacher's Pet (4:45)
  17. Leave Me In Hell (3:35)
  18. Sacrifice (4:30)
  19. Heaven's On Fire (3:41)
  20. Countess Bathory (3:48)
  21. Don't Burn The Witch (3:17)
  22. At War With Satan (Introduction) (2:22)
  23. At War With Satan (LP3: At War with Satan) (19:56)
  24. Rip Ride (3:11)
  25. Genocide (2:58)
  26. Cry Wolf (4:19)
  27. Stand Up (& Be Counted) (3:30)
  28. Women, Leather & Hell (3:20)
  29. Aaaaaarrghh (2:26)
  30. Powerdrive (LP4: Possessed) (3:14)
  31. Flytrap (3:48)
  32. Satanarchist (2:43)
  33. Burn This Place (To The Ground) (2:39)
  34. Harmony Dies (2:42)
  35. Possessed (4:50)
  36. Hellchild (2:39)
  37. Moonshine (3:17)
  38. Wing & A Prayer (2:44)
  39. Suffer Not The Children (3:04)
  40. Voyeur (2:58)
  41. Mystique (4:57)
  42. Too Loud (For The Crowd) (2:57)
  43. Intro/Too Loud (For The Crowd) (LP5: Eine Kleine Nachtmusik) (1:31)
  44. Seven Gates Of Hell (2:51)
  45. Leave Me In Hell (4:39)
  46. Nightmare (3:07)
  47. Countess Bathory (7:19)
  48. Die Hard (2:51)
  49. Schizo (3:24)
  50. Guitar Solo - Mantas (3:12)
  51. In Nomine Satanas (3:22)
  52. Witching Hour (4:14)
  53. Black Metal (LP6: Eine Kleine Nachtmusik) (3:17)
  54. The Chanting Of The Priests (5:07)
  55. Satanarchist (1:57)
  56. Flytrap (3:37)
  57. Warhead (4:16)
  58. Buried Alive/Love Amongst The Dead (5:37)
  59. Bass Solo - Cronos (3:46)
  60. Welcome To Hell/Bloodlust (7:11)
  61. Angel Dust (LP7: Sons Of Satan Rare & unreleased - Church Hall Rehearsals 1979AD) (4:43)
  62. Buried Alive (Church Hall Rehearsals 1979AD) (5:35)
  63. Raise The Dead (Church Hall Rehearsals 1979AD) (5:10)
  64. Red Light Fever (Church Hall Rehearsals 1979AD) (4:17)
  65. Sons Of Satan (1980AD Impulse Studios - £50 demo Recordings) (3:20)
  66. In League With Satan (1980AD Impulse Studios - £50 demo Recordings) (3:18)
  67. Angel Dust (1980AD Impulse Studios - £50 demo Recordings) (4:10)
  68. Live Like An Angel (Die Like A Devil) (1980AD Impulse Studios - £50 demo Recordings) (4:13)
  69. Schizo (LP8: Sons Of Satan Rare & unreleased - 1980AD Impulse Studios - £50 demo Recordings) (5:00)
  70. Venom (1980AD Impulse Studios - £50 demo Recordings) (4:40)
  71. Angel Dust (Impulse Studio demo Session 1980AD) (3:11)
  72. Raise The Dead (Impulse Studio demo Session 1980AD) (3:36)
  73. Red Light Fever (Impulse Studio demo Session 1980AD) (4:49)
  74. At War With Satan (1983AD Impulse Studio - At War demos) (13:45)
  75. Bloodlust (3:02)
  76. In Nomine Satanas (3:25)
 in stock $155.96
Cat: 728707 Rel: 24 Jul 19 • View all Synth modules
 
Ring modulator based on the ARP 2600's 4014 ring mod - 8HP
Notes: Mobula is Delta Sound Labs' faithful take on the classic ARP 2600 ring modulator model 4014. This particular processor is renowned the world over for its clean sounding ring modulation effect. Due to its unconventional circuit design, where the positive and negative parts of the signal split between two two-quadrant multipliers, it achieves what is referred to as a four quadrant multiplication.

Built with a combination of modern closely matched and discrete transistors this super skiff friendly module is faithful to all of the original features, with the single addition of independent switching of input signal DC-blocking. This module is DC-coupled; meaning it will happily process both control voltages and audio signals at the flick of a switch. The unique electronic architecture leads to both significantly increased low frequency response and superior carrier suppression when compared to traditional transformer based ring modulation designs.
Read more
 1 in stock $161.22
Cat: 717776 Rel: 21 Jan 19 • View all DJ mixers
 
2-channel DJ scratch mixer with integrated mini innoFADER Pro
Notes: Premium quality contactless mini innoFADER Pro integrated:

The DIF-M2 features the mini innoFADER Pro from Audio Innovate as the crossfader. Inherited from the original innoFADER, it provides smooth and robust feeling to the Scratch DJs. The contactless design gives a long life of over 4,000,000 cycles! The cut-in position can be adjusted by users with simple calibration steps to fit your taste. The Reverse switch and Curve Adjust knobs for both channel faders and crossfader allows you to do different style of scratch skill. The mixer is also compatible with the original innoFADER for future upgrade.

Innovative DVS Mode for DVS users:

The DIF-M2's DVS Mode makes DJ's life easier switching between traditional turntable setup and DVS setup. At the rear of the DIF-2S MKII, the extra pairs of DVS SEND/RETURN RCA connectors allow you to connect to your DVS audio interface (e.g. the SL2/SL3 for Serato). Just switch to the DVS channel on the top panel, no need to reconnect any cable and you are ready to use as a DVS setup.

High-Quality and complete mixer, yet affordable price:

The DIF-M2 serves as a full-feature 2-channel mixer: 3-band EQ, 1/4" microphone input, 1/4" & 3.5mm headphones outputs with monitoring mode CUE/MIX/MASTER, RCA direct outputs for channels, 1/4" stereo Master output, and even a RCA Booth output with a dedicated volume control, yet, the price is affordable!
Read more
 2 in stock $186.66
Cat: 734880 Rel: 10 Jul 19 • View all Synth modules
 
Envelope module with two ADSR voltage controlled enevelope generators - 8HP
Notes: The module contains two ADSR type voltage controlled envelope generators with exponential curve shapes (charge/discharge curves of a capacitor) behind a front panel with 8 HP only.

Each ADSR provides these controls and in/outputs:

- LED (displays the envelope output)
- A: manual Attack control
- D: manual Decay control
- S: manual Sustain control
- R: manual Release control
- Gate Input
- Retrigger Input
- CVT Input with attenuator (CVT = CV Time)
- Envelope Output 1
- Envelope Output 2

The output voltage range for each envelope is 0 - 10V (10V = attack peak).

The time range of Attack/Decay/Release is about 1ms to 30s.

By means of internal jumpers one can select which time parameters are controlled by the CVT input (e.g. D only or D+R or A+D+R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question).

Socket CVT can be normalled to an internal fixed voltage (i.e. the switching contact is connected to an internal fixed voltage). That way it's possible to change all time parameters simultaneously by means of the CVT control.

Another jumper is used to set output 2 to normal or inverted envelope.

And another jumper is used for the normalling of Gate 2 to Gate 1 (i.e. ADSR#2 is also triggered by Gate 1).

Two more jumpers are used for the optional bus access to the gate signal of the bus for each ADSR.
Read more
 3 in stock $153.21
Cat: 738634 Rel: 09 Jul 19 • View all Synth modules
 
Quad AD-generator with four independent Attack-Decay envelopes - 28HP
Notes: Module A-143-1 is a complex envelope generator that consists of Attack/Decay generators. For the complex envelope generator the four units are daisy-chained, i.e. the preceding unit triggers the following unit. The four units can be used even as four separate AD generators (switch position AD) or AD-type LFOs (switch position).

Details: Module A-143-1 contains four separate attack/decay type envelope generators. Each unit can be switched into a free running mode (LFO mode). The LFO mode differs in several points from a regular LFO (like A-145, A-146 or A-147): The slopes are exponential - in contrast to linear slopes of a normal LFO, and the frequency is defined by both controls. The attack control defines the time of the rising slope, the decay control the falling slope.

Each unit has available a comparator that compares the AD output voltage with a manually adjustable threshold and switches the corresponding comparator output (Cp 1...4) to "high" as soon as the AD output voltage goes in the decay phase below this value. The comparator output is normalled to the trigger input of the next stage via the switching contact of the trigger input socket. Consequently the first unit triggers the second, the second triggers the third and so on.

Each AD generator is equipped with a Polarizer (look at the Voltage Controlled Polarizer A-133 concerning details about the polarizer function) and a mixer that adds up all polarizer outputs. This allows to add up all AD/LFO output signals inverting or non-inverting with adjustable level to the mix output. Additionally a single output (Env 1...4) is available for each unit.

If the trigger input of unit 1 is controlled by a normal gate signal (e.g. from a keyboard resp. MIDI-to-CV/Gate interface) one obtains a very complex envelope signal at the mix output. The signal contains 8 segments controlled by Attack 1, Decay 1, Attack 2, Decay 2, Attack 3, Decay 3, Attack 4 and Decay 4. The transition between the stages (i.e. when the following AD generator is triggered) is controlled by threshold knob. The positive or negative contribution of each unit to the mix signal is adjusted with the Mixing Polarizer control. If the trigger input of unit 1 is controlled by the comparator output of unit 4 one obtains a 8 stage LFO.

The single AD outputs can be used to control VCAs or VCFs that open one after another corresponding to the AD signals (a little bit similar to the Shepard generator A-191).

The default-connection between the four units (CPn = Trig.n+1) can be interrupted by patching cables into the trigger inputs. Consequently the four units can be used as separate AD generators or LFOs. In any case the mix signal is available (e.g. mix of four AD generators or LFOs with adjustable level and sign).

In the LFO mode the comparator output serves as LFO rectangle output with adjustable pulse width (= threshold control).

Each unit is equipped with a separate LED display for envelop and comparator output. The shortest attack/decay time is about 5 ms, the longest attack/decay times are about 3 seconds (attack) / 10 seconds (decay). By changing the value of a capacitor the shortest time can be modified (details can be found here: A100_Capacitors.htm).

The sketch at the bottom of the page shows the module principle with 4 daisy-chained AD units (as predetermined by the normalled sockets), that are mixed with the integrated polarizing mixer.
Read more
 2 in stock $157.97
Cat: 745782 Rel: 09 Sep 19 • View all Synth modules
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step addressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analogue CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analogue outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be connected to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.
Read more
 1 in stock $169.89
Cat: 745783 Rel: 09 Sep 19 • View all Synth modules
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step adressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analog CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analog outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be conneted to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.

The functions of the Start/Stop/Step/Reset buttons and inputs are the same as for the "old" control unit of the A-155:

A high level at the Start input or operating the Start button starts the sequence from the momentarily addressed step. Not working in "CV controlled step address" mode.

A high level at the Stop input or operating the Stop button stops the sequence (the last active step remains addressed). Not working in "CV controlled step address" mode.
Read more
 1 in stock $163.38
Cat: 744056 Rel: 10 Oct 19 • View all Effects pedals
 
Modulator effects pedal for guitar with 11 modulations, depth control, rate control, volume/colour control & momentary mode
Notes: The Mod 11 is packed with 11 different modulation effects that range from classic to exotic plus advanced functionality all in a compact pedal. It gives you access to powerful yet intuitive "hidden" parameters accessible through its Secondary Knob Mode which let you take even greater control over its effects.

The Mod 11's modulation effects are:

1. TREM: Tremolo modulates your signal's volume. Selectable modes allow your playing envelope to control modulation rate or depth.
2. HARM: Harmonic tremolo. The signal is split into high and low frequency bands and modulated between the two. Selectable modes allow your playing envelope to control modulation rate or depth.
3. VIBR: Vibrato modulates your instrument's pitch. Selectable modes allow your playing envelope to control modulation rate or depth.
4. UNI: pays homage to the classic Univiber. Includes "Chorus" and "Vibrato" modes plus added overdrive
5. CHORUS: Warbling, doubling, chorus effect like the EHX Small Clone. Extra modes include tri-chorus and bass chorus effects
6. ROTARY: Rotary speaker cabinet simulation. Extra functionality includes overdrive plus envelope control over rotation speed
7. FLANGE: Flanging with modes for both additive and subtractive flanger. Multiple LFO shapes, including envelope follower
8. TZF: Through Zero Flanger. A flanger effect that crosses through the "zero point" of the sweep where the modulated delayed signal meets back with the dry signal. Modes for both additive and subtractive flanger, plus barber-pole flanger
9. PHASE: Choose from 4, 6, or 8 stage phaser. Multiple LFO shapes including envelope follower
10. PITCH: Modulated pitch shifter. Select your main pitch shift and modulate around it. Extra functionality includes a dry blend and stepped pitch modes
11. FILT: Modulated filter effects like those on classic analogue synths. Low Pass, High Pass and Band Pass. Multiple LFO shapes available including a Q-Tron style envelope follower

The Mod 11's Momentary Mode lets you seamlessly switch in and out of effects mode for quick accents. It also features Tap Tempo controllable via the built-in footswitch or an external one. The Mod 11 is modulation with warp drive!
Read more
 1 in stock $152.57
Cat: 741401 Rel: 01 Aug 19 • View all Synth modules
 
Analogue waveform generator & oscillator - 6HP
Notes: The Electrosmith 3340 VCO is an all analogue, voltage controlled waveform generator that uses a reissue of the legendary Curtis CEM3340 IC.

Many believe this chip to be the greatest sounding analogue oscillator of all time. Simultaneous outputs of sine, triangle, sawtooth, and square waves are available along with linear/exponential FM, hard/soft sync, and PWM capabilities. Volt per octave tracking covers a huge 10+ octaves and is extremely stable across all temperatures. Snag a piece of history with the Electrosmith 3340 VCO.
Read more
 1 in stock $155.81
Cat: 734886 Rel: 15 Oct 19 • View all Synth modules
 
Stereo filter with voltage controlled resonance - 6HP
Notes: Versatile stereo digital filter based on Endorphin's Grand Terminal module. CV-controlled cutoff, resonance and separate high-pass filter. Simple but effective.

Supplier notes:
The Squawk Dirty To Me is a stereo filter with voltage controlled resonance. It features eight filter modes and zero-delay feedback.

- Simple and effective 6hp stereo VCF
- 8 filter modes available with meta CV scanning, famous zero-delay feedback Grand Terminal filters
- Additional hi-pass filter in series quickly cuts the boomy low end
Read more
 3 in stock $180.70
Cat: 716534 Rel: 24 Jan 19 • View all Synth modules
 
10HP Eurorack module featuring 4 stereo inputs with simultaneous volume adjustment on both channels
Notes: Black Stereo Mixer is just what you need, if your setup has several nowadays gaining popularity modules with stereo inputs or outputs, like Black Hole DSP, Erica Fusion Delay, MI Clouds or some other. In order to save rack space, we designed compact mixer with lot of cool, performance oriented features.

In order to save rack space, we designed a compact mixer with a lot of cool, performance oriented features.

Check out also the Black Pre-fade Listen Expander that is a satellite module to Erica Synths Black Stereo Mixer!

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, we did not economise on the module width, we put design and usability first. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.
Read more
 1 in stock $152.56
Cat: 712712 Rel: 10 Jan 19 • View all Synth modules
 
Stereo mixer, 4 stereo in, with limiter - 10HP
Notes: Drum Stereo Mixer completes the drum mix and has configurable stereo inputs to receive signals from stereo FX modules and stereo output to interface the modular system with external devices. LEDs next to each input give visual feedback on a signal level.
Read more
 1 in stock $172.04
Cat: 744602 Rel: 02 Oct 19 • View all Synth modules
 
Dual signal/audio crossmixer
Notes: The "CROSSMIX" module contains two independent crossfaders with two inputs to one output and is designed for audio or CV sources in the voltage range +-5v (Audio Modular Level).

In addition, the 4 inputs can be switched separately to +6db audio (for external line level sources) using the slide switch on the rear panel.

The two crossmix controls can be recorded. The recording time per channel is more than one minute. The playback speed can be adjusted in playback.

The recorded track is played back once when the Play button is pressed briefly (one shot) or in the loop when the button is pressed a little longer.

Both crossfaders have a separate reset input as well as a separate CV input (+-5V ) for controlling the mix e.g. by an LFO.

The track data remains permanently stored (battery buffered memory).
Read more
 1 in stock $194.78
Cat: 744601 Rel: 23 Sep 19 • View all Synth modules
 
Compact three-channel mixer - 6HP
Notes: The "AUTOMIX" module is a compact three-channel mixer for audio or CV sources in the voltage range +-5v (audio modular level).

The mix level of each track can be adjusted and recorded with the track control. The recording time per track is more than one minute. The playback speed is also adjustable.

The recorded track is played back once when the Play button is pressed briefly (one shot) or when the Loop button is pressed a little longer.

In addition, the 3 inputs can be switched separately to +6db audio (for external line level sources) using the slide switch on the rear panel.

All three tracks have a common reset input. The track data remains permanently stored (battery buffered memory).
Read more
 1 in stock $194.78
Cat: 731956 Rel: 16 May 19 • View all Synth modules
 
3-channel module for recording & playing back movements of controllers - 6HP
Notes: The FLAME "C-3 MK2" is a three-channel module for recording and playing back movements of controllers. These can be recorded with each channel's individual knob. The movements will be output as control voltages. The recording time per track is over one minute. The playback speed is adjustable. All three tracks have a common reset input. The track data remains permanently stored (battery-backed memory). The module can be globally switched to bipolar or unipolar voltage range (switch on the PCB).
Read more
 3 in stock $161.22
Cat: 731957 Rel: 03 Jul 19 • View all Synth modules
 
Small compact joystick module with recording function - 8HP
Notes: The module can record the joystick movement up to a length of over a minute. The sequence remains stored in the battery-backed RAM after switching off. When playing the sequence, it can be manipulated in speed and playback direction.

There is a FREEZE function to hold the current joystick position plus an external reset input. In addition, a GATE is set during movement and a CV voltage is output as a function of the joystick movement. The ranges of the X / Y output voltages are bipolar +/- 5v or unipolar from 0 to + 10v. Both channels X and Y have a passive attenuator potentiometer, so that the voltage range can also be set lower.
Read more
 1 in stock $161.22
Cat: 732134 Rel: 15 May 19 • View all Synth modules
 
Updated version of the State 700 module - 10HP
Notes: State 700 Mk2 is an update of this popular module. The Mk2 is the same size as the Mk1, at 10HP wide, but features additional audio and CV inputs, both with their own attenuators. Based on the Roland System 700 state variable filter module, State 700 provides lowpass, bandpass and highpass outputs simultaneously. The Mk2 features upgraded outputs from the original module, keeping signals more in line with Eurorack output levels. A big part of the sound of the State 700 is the way in which resonance is reduced as the audio inputs are driven harder. It won't self oscillate with a hot audio input, throttle back a little and you'll get squelchy ear bleeding resonances!
Read more
 2 in stock $192.61
Cat: 746966 Rel: 12 Sep 19 • View all Synth modules
 
Great sounding VCO for Eurorack - 10HP
Notes: Here's the Roland 100M VCO adapted to Euro. The hard-to-find UA726 has been replaced with a CA3046 with no loss of performance. No hard to find parts whatsoever. The PCB also includes pads for SMD LM3046. It'a the golden age right here.

- A six position rotary switch for octaves gives plenty of range. The PITCH pot is fine tune
- Individual outputs for ramp, square and triangle - an improvement on the original
- Built in chip heater
- Onboard LFO! Yes that's right, an onboard LFO (thanks MC202) for introducing FM and/or PWM
Read more
 1 in stock $192.61
Cat: 744063 Rel: 12 Sep 19 • View all Synth modules
 
CEM3340 based VCO - 10HP
Notes: CEMosc is here, a stable AS3340 based VCO which tracks beautifully, and is feature rich. Easy to build and calibrate too.

CEMosc features:

- Onboard voltage regulation for tuning and tracking stability
- A rotary octave switch as well as a fine tune knob
- Both manual PW as well as PWM are available
- Linear and Exponential FM inputs, each with attenuators
- Both soft and hard sync
- Sawtooth, Triangle and Pulse outputs
Read more
 1 in stock $192.60
Notes: Frequency Central's Whiteface is a new voltage controlled analogue filter for Eurorack based on the ARP 4023 filter, found in the "whiteface" Odyssey MK1 Synthesiser.

Besides the classic cut-off & resonance controls, it comes with two audio inputs as well as two CV inputs.

The rare parts have been engineered out (and the need for matched transistors for the CV input section) by using a Roland style circuit there instead - no change to the vibe though! The audio path remains pure ARP, with one exception. Built stock from the schematic, the resonance would clip above 3 o'clock, in a way which is neither musical or desirable. An inverting buffer has now been used, which adds a bit of gain to bring it up to modular levels. A nice side effect of the inverting buffer is that if you mix the input signal with the filter output, and find the sweet spot, you can do high-pass filtering too!
Read more
 1 in stock $151.48
Cat: 739110 Rel: 28 May 19 • View all Synth modules
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The TRAX is a compact 6 HP Eurorack module that manages to combine the best elements of classic sequencers mixed with some amazing new features. It offers a wide range of possibilities from traditional to the more experimental algorithmic type sequencing.

With unique new features like Evolve, once you enter a pattern or two, the TRAX is able to compare the patterns and generate numerous related patterns instantly for you to access. In addition, the Remix feature will provide 256 variations of each pattern entered.

The TRAX features a Trigger Output, 2 CV Outputs, and an Analog Clock Input that doubles as an Output when reconfigured. Combine the TRAX module with the new MIDI BUS module to control TRAX with a MIDI Clock, send TRAX MIDI Input, or even send MIDI Note Output from the TRAX!

Each Trigger and CV part have their own parameters to control playback type, direction, remix, evolve, phi, randomize, copy/paste, offset, loop steps, loop bars, and a regeneration loop point for evolve and phi modes. And our unique CV Links feature allows any or all of these parameters to be used independently, or instead follow the Rhythm part's parameter values to behave more like traditional sequencers.

A host of Global features provide playback, sync, tempo control, swing, mute, fills, rec type, independent CV output quantization to 29 different scales, MIDI, MIDI to CV conversion, and screensaver.
Read more
 1 in stock $152.50
Cat: 720430 Rel: 28 May 19 • View all Synth modules
 
Trigger & CV sequencer - 6HP
Notes: The TRAX is a compact 6 HP Eurorack module that manages to combine the best elements of classic sequencers mixed with some amazing new features. It offers a wide range of possibilities from traditional to the more experimental algorithmic type sequencing.

With unique new features like Evolve, once you enter a pattern or two, the TRAX is able to compare the patterns and generate numerous related patterns instantly for you to access. In addition, the Remix feature will provide 256 variations of each pattern entered.

The TRAX features a Trigger Output, 2 CV Outputs, and an Analog Clock Input that doubles as an Output when reconfigured. Combine the TRAX module with the new MIDI BUS module to control TRAX with a MIDI Clock, send TRAX MIDI Input, or even send MIDI Note Output from the TRAX!

Each Trigger and CV part have their own parameters to control playback type, direction, remix, evolve, phi, randomize, copy/paste, offset, loop steps, loop bars, and a regeneration loop point for evolve and phi modes. And our unique CV Links feature allows any or all of these parameters to be used independently, or instead follow the Rhythm part's parameter values to behave more like traditional sequencers.

A host of Global features provide playback, sync, tempo control, swing, mute, fills, rec type, independent CV output quantization to 29 different scales, MIDI, MIDI to CV conversion, and screensaver.
Read more
 5 in stock $178.53
Cat: 717795 Rel: 18 Jan 19 • View all PA amplifiers
 
Professional power amplifier designed for live sound reinforcement applications
Notes: Clean, Reliable Power in a durable 17lb enclosure. If you demand professional amplification performance, the XGA-5000 is perfect for delivering pure, consistent wattage night after night, year in and year out! This system brings 5,000 watts of Instant Peak Power making it ideal for PA systems and DJ rigs. We’ve designed this with our patented front to rear airflow technology powered by a variable speed thermal stabilizer to guarantee seamless, reliable performance every single night! Our XGA-5000 offers clean, dependable power in a lightweight body at an unmatched value.
Read more
 1 in stock $166.63
Cat: 717794 Rel: 18 Jan 19 • View all PA amplifiers
 
Professional power amplifier designed for live sound reinforcement applications
Notes: Clean, Reliable Power in a durable 17lb enclosure. If you demand professional amplification performance, the XGA-4000 is perfect for delivering pure, consistent wattage night after night, year in and year out! This system brings 4,000 watts of Instant Peak Power making it ideal for PA systems and DJ rigs. We’ve designed this with our patented front to rear airflow technology powered by a variable speed thermal stabilizer to guarantee seamless, reliable performance every single night! Our XGA-4000 offers clean, dependable power in a lightweight body at an unmatched value.
Read more
 1 in stock $153.65
Cat: 744610 Rel: 06 Sep 19 • View all Synth modules
 
Eurorack receiver for the Wave sensor that allows Wave to connect to modular synthesisers - 4HP
Notes: The Wavefront module is the Eurorack receiver for Wave that allows Wave to connect to modular synthesizers. With Wavefront you can completely bypass the computer and bring unprecedented sound control, effect shaping and manipulation to modular setups.

Use subtle gestures to add vibrato to your favourite lead synth module, or use more visible gestures while performing.

The buttons are great for triggering sequences while the tap lets you interact with percussive modules in a completely new way. Drumming on a table has never been as fun!

To use Wavefront you need one Wave (ring) per module.
Read more
 1 in stock $194.76
Cat: 712912 Rel: 03 Dec 18 • View all DJ controllers
 
Beginner DJ controller with integrated USB audio interface & built-in learning functions
Notes: Beginner-friendly DJ controller at a low price. Smartly focussed feature set designed to guide you on how to mix. Includes DJuced DJ software to get you started.

Supplier notes:
Hercules introduces the first-ever range of DJ controllers to really learn how to mix. With the DJControl Inpulse 300, you will love to practice your listening skills and learn to master beatmatching manually. Start DJing easily and improve quickly with the help of exclusive features from the DJControl Inpulse 300 and its DJUCED software: light guides on the controller to learn the right moves, the Intelligent Music Assistant (IMA) to help you pick the best songs to play, the ENERGY feature to manage the party mood, and the DJ Academy with its onboard video tutorials. The DJControl Inpulse 300 also offers everything you need to perfect your mixing skills: 16 pads, 8 modes, large jog wheels, effects on par with pro controllers, and much more.

LIGHT GUIDES:

Activate the Beatmatch Guide to learn how to mix. Deactivate it once you have mastered the moves. Follow the TEMPO arrows to adjust the BPM of each track. Synchronize your tracks using the BEAT ALIGN arrows.

INTELLIGENT MUSIC ASSISTANT:

Activate the Intelligent Music Assistant (IMA) to get the best music suggestions.

DJ ACADEMY TUTORIALS:

Watch the comprehensive tutorial videos incorporated into DJUCED, to learn the fundamentals of DJing and improve your skills.

TAKE CONTROL OF THE PARTY AMBIENCE:

Pace the atmosphere of your parties with the ENERGY function. From blue (calm) to red (energetic), choose the most appropriate track for your mix.
Read more
 1 in stock $179.62
Cat: 743796 Rel: 12 Sep 19 • View all MIDI keyboards
 
37 key universal keyboard controller
Notes: 37-key version of IK's portable keyboard offering, cramming three octaves of velocity-sensitive keys into a neat and compact little package.

Supplier notes:
iRig Keys 2 gives you more ways to connect & control all of your gear, in any situation. With improved compatibility for the latest mobile devices, full MIDI input and output, multiple power options, a stocked software bundle and a stylish new look, this new and improved controller is ready to play when you are.

iRig Keys 2 is a 37-key (3 octave) USB/MIDI keyboard controller with velocity-sensitive keys that connects to all of your devices: iPhone, iPad, Android and Mac/PC as well as any other MIDI compatible device. Packed into an ultra-compact size, it's the perfect way to unleash your creativity on the go.

Control more:
iRig Keys 2 adds MIDI input and output so you can control stand-alone gear like UNO Synth and other analogue synthesizers, UNO Drum and other drum machines, and more. When connected to a computer or mobile device, it acts as a MIDI interface for all your gear, streamlining your rig into one compact unit.

You can run iRig Keys 2 off your computer or mobile device, USB power supply or even USB battery packs, so it's perfect for on-the-go rigs.

Be heard:
Never worry about compatibility issues again. iRig Keys 2 works right out of the box with iPhone, iPad and Mac/PC, plus it's compatible with most Android devices*, even the latest models. A new headphone output lets you connect speakers or headphones, so you're never stuck using your device's built-in speakers.

Whether you want to practice silently or blast through a sound system, iRig Keys 2 has you covered.

Limitless potential:
Best of all, iRig Keys 2 works with hundreds of popular music apps for iPhone, iPad, Android and Mac/PC.

Whether you want to learn to play, practice your chops, compose a song or perform live, and more, there's a never-ending stream of apps waiting to fuel your inspiration.

Convenient control:
iRig Keys 2 hosts a number of useful controls - from modulation and pitch bend wheels, a volume output control, octave up/down buttons, program up/down buttons, a set button, an ALT button, and a data push encoder.

Where to next:
iRig Keys 2 is designed for portability, so it can travel anywhere you do. It's smaller than other 37-key keyboards on the market, and runs off your device, a USB wall charger or USB battery pack, meaning there's no bounds to your creativity. Head outside, get inspired in your hotel room, practice in the classroom - no matter where your musical journey takes you, iRig Keys 2 will be along for the ride.

Cutting-edge software bundle:
iRig Keys 2 includes IK's award-winning Mac/PC sound & groove workstation, SampleTank 4 SE, giving you over 2000 sounds to create cutting-edge tracks right out of the box.

It also unlocks free apps like SampleTank FREE for iPhone iPad, iGrand Piano FREE for iPhone, iPad and Android, and iLectric Piano FREE for Android.
Read more
 More than 10 in stock $150.40
A Star Is Born (Deluxe Edition) (Soundtrack) (limited numbered gatefold gold vinyl 2xLP + CD box set + posters + lithographs + photos + sheet music + journal)
Cat: B 002962102. Rel: 28 Jun 19
Soundtracks
  1. Intro (0:21)
  2. Black Eyes (3:05)
  3. Somewhere Over The Rainbow (0:40)
  4. Fabulous French (0:20)
  5. La Vie En Rose (2:59)
  6. I'll Wait For You (0:20)
  7. Maybe It's Time (2:38)
  8. Parking Lot (0:31)
  9. Out Of Time (2:53)
  10. Alibi (3:17)
  11. Trust Me (0:32)
  12. Shallow (3:40)
  13. First Stop, Arizona (0:12)
  14. Music To My Eyes (3:17)
  15. Diggin' My Grave (3:58)
  16. I Love You (0:20)
  17. Always Remember Us This Way (3:30)
  18. Unbelievable (0:32)
  19. How Do You Hear It? (0:17)
  20. Look What I Found (2:52)
  21. Memphis (0:25)
  22. Heal Me (3:16)
  23. I Don't Know What Love Is (2:57)
  24. Vows (0:18)
  25. Is That Alright? (3:09)
  26. SNL (0:13)
  27. Why Did You Do That? (3:05)
  28. Hair Body Face (3:26)
  29. Scene 98 (0:35)
  30. Before I Cry (4:17)
  31. Too Far Gone (1:26)
  32. Twelve Notes (1:04)
  33. I'll Never Love Again (Film version) (4:40)
  34. I'll Never Love Again (extended version) (5:31)
  35. Intro
  36. Black Eyes
  37. Somewhere Over The Rainbow
  38. Fabulous French
  39. La Vie En Rose
  40. I'll Wait For You
  41. Maybe It's Time
  42. Parking Lot
  43. Out Of Time
  44. Alibi
  45. Trust Me
  46. Shallow
  47. First Stop, Arizona
  48. Music To My Eyes
  49. Diggin' My Grave
  50. I Love You
  51. Always Remember Us This Way
  52. Unbelievable
  53. How Do You Hear It?
  54. Look What I Found
  55. Memphis
  56. Heal Me
  57. I Don't Know What Love Is
  58. Vows
  59. Is That Alright?
  60. SNL
  61. Why Did You Do That?
  62. Hair Body Face
  63. Scene 98
  64. Before I Cry
  65. Too Far Gone
  66. Twelve Notes
  67. I'll Never Love Again (Film version)
  68. I'll Never Love Again (extended version)
 in stock $153.65
Notes: The K-Board Pro 4 hard case is custom built with a rugged but lightweight aluminium and ABS outer construction and high-density form fitting EVA foam inner cushion to keep your instrument safe and secure when on the move. It includes two locking latches with keys, a comfortable handle, and is carry-on compatible on most flights (check with your airline for compatibility confirmation).
Read more
MRP:$210.36 SAVE 26%
 1 in stock $155.81
Cat: 711947 Rel: 26 Nov 18 • View all Audio & MIDI interfaces
 
High specification single synth MIDI to CV converter
Notes: The PRO-SOLO Mk3 converts MIDI data into CV- gate and clock signals. The operation is easy and clear, settings can be saved in non-volatile memory. High-resolution 16-Bit converters provide accurate tracking and fast response. 1V/oct and Hz/V characteristics are possible as well as normal gate and Switched Trigger (S-Trig).

The unit features two CV- and one gate output, additionally there's an analogue clock output. MIDI thru socket can also be used as DIN-Sync output or it can output two additional voltages with a special cable. MIDI synched LFO.
Read more
 3 in stock $170.96
Cat: 725927 Rel: 19 Mar 19 • View all Hi-fi headphones
 
On-ear headphones featuring incredible acoustics & comfortable, portable design
Notes: One of Paul W. Klipsch's first labours of love was a headphone. 70 years later, our legendary acoustic heritage combined with in-depth comfort and fit expertise are forged into every Klipsch headphone making them the best sounding, most comfortable options on the planet. Reference On-Ear II headphones are engineered to minimize fatigue and create the perfect seal so you can rock-on, way past the encore.

Quality you can feel:

Designed with the authentic in mind, Reference On-Ear headphones are crafted with a minimal, clean design. Hinges and sliding mechanisms are reinforced and intelligently hidden for a clean, solid feel and added reliability.

Amazing sound:

A ground-up design focusing on proper representation of music from any genre, Reference On-Ear doesn't add anything you weren't meant to hear by the artist. Vocals are clear, highs are crisp, and bass is true and accurate.

Total comfort:

Reference On-Ear's premium ear cushions are soft and deep. This adds comfort and separates music from outside noise. The earcup provides articulation in every direction, ensuring that pressure is applied evenly across the entire ear. With just the right amount of headband pressure, your ears stay comfortable for hours.

Portable design:

Perfect for on-the-go situations, Reference On-Ear headphones fold up and includes a hard zip carrying case. A durable, tangle-resistant cable and three button mic allows full control of your Apple device without having to take it out of your pocket.
Read more
 1 in stock $188.44
Korg Volca Drum Digital Percussion Synthesiser (drum machine/percussion synthesiser)
Cat: 715951 Rel: 21 Mar 19 • View all Drum machines
 
Drum machine with 16-step sequencer, 6 dual-layer drum parts, MIDI input & sync I/O
Notes: Welcome to an infinitely expanding world of sound-design. Joining volca kick and beats as the third, and most unique, drum synth in the volca lineup. The volca series is all about unique sound. Whether it's analogue, PCM, or FM, the volca series puts unique sounds into an accessible platform. And now, the series is joined by a new rhythm machine that brings yet another sonic character. It's the volca drum digital percussion synthesizer. Based on a simple trigger waveform, wave folder and overdrive are used to add overtones and distortion, and then a waveguide resonator effect brings the sound to life. The six-part DSP synth engine was designed with a completely different philosophy than conventional drum machines, and generates a wide range of unexpectedly different sounds. And of course, you can play those sounds from the volca-style sequencer.

Adding these distinctive sounds to your rhythms will revolutionarily transform your performances and productions.

Digital percussion synth with a 6-part x 2-layer structure:

The term "digital" typically brings to mind sounds that are based on PCM-sampled bass drum, snare drum, or cymbal, but the volca drum creates its drum sounds by DSP-powered analogue modelling. Oscillator waveforms such as sine wave, sawtooth wave, and noise are provided. By applying various changes to these waveforms, you can create a wide variety of percussion sounds that range from realistic to idiosyncratic, and are not limited only to drums.

The six parts each have two layers, and do not impose any rules or restrictions such as specifying which parts must be used for the bass drum or for the cymbal; all parts have the same specifications. You can freely assign your new sounds to these six parts without being limited by the conventions of a drum set. A kit consists of the six parts that you've assigned plus the waveguide resonator effect settings, and 16 such kits can be stored in memory (the factory settings contain 10 preload kits).

Distinctive sound from a newly developed DSP engine:

Each part consists of two layers. For each layer, users choose one of five types of oscillator waveform including sine wave, sawtooth wave, and HPF noise, and also choose from three types of pitch modulator and amp EG, each optimized for drum sounds. Layer parameters can be edited either individually or simultaneously, and users can also use the two layers to produce the same sound for additional thickness.

Waveguide resonator adds rich resonances:

The effect section features a waveguide resonator that's based on physical modelling, and which adds sympathetic resonances to the sound. You can choose from two types of waveguide: "tube" which adds the resonance of a cylindrical object such as a drum body or a long pipe, or "strings" which adds the metallic resonance of a string. The three knobs located in the centre of the panel let you specify the DECAY (amount of attenuation), BODY (sonic character), and TUNE (pitch). Setting TUNE to a lower value will produce a delay-like behaviour. You can take advantage of these knobs not only for sound design but also in your live performances.

16-step sequencer with a wide range of parameter automation:

The 16-step sequencer is excellent for improvisation. You can easily create patterns using the 16 buttons, each corresponding to one of the 16 steps. In addition to step recording, the sequencer also supports realtime recording in which you can construct a pattern while looping the playback. The pattern chain function lets you play multiple sequence patterns successively, so you can successively play back desired patterns of consecutive numbers. Up to 16 sequences can be connected to construct patterns with 256 steps.
Read more
 9 in stock $161.23
Cat: 732455 Rel: 23 Sep 19 • View all Synthesisers
 
Powerful bass synth with sound source based around a vacuum tube oscillator
Notes: Valves meet Volca. The original Volca Bass design gets twisted with the addition of Korg's Nutube technology for gritty saturation. 303-style acid with a filthy attitude.

Supplier notes:
Even today, when digital technology allows electronic musical instruments to simulate any sound imaginable, people seek the warm harmonics and distortion produced by analogue vacuum tubes. This distinctive sound has a quality beyond words that sets it apart, and cannot be captured by a response curve; it's the unmistakable sound of tubes.

The Volca Nubass is the first analogue synth to be equipped with a Nutube new-generation vacuum tube in its oscillator. Vacuum tube plus analogue means that the sound is warm, thick, and rich. The familiar transistor ladder filter gives it the character of a classic bass machine, along with overdrive, and huge-sounding distortion.

An acid bass machine for a new generation combines classic sound with the power of modern synthesizer design. It's the Volca Nubass.

A vacuum tube oscillator circuit forms the heart of Volca Nubass, utilizing groundbreaking Nutube technology:

The Nutube is equipped with two vacuum tubes; one is used in the oscillator to generate a sawtooth wave or square wave. The other vacuum tube is used in the drive circuit of the sub oscillator, adding depth and warmth one octave below the oscillator. This oscillator and sub oscillator provide a circuit structure that brings out the harmonic character that only a real vacuum tube could provide.

A transistor ladder low-pass filter that produces a distinctive sound:

The low-pass filter defines the sound of this bass machine; it uses a transistor ladder design found on classic analogue bass synths. This filter is uniquely dynamic in the way it affects a sound more than just ranging from bright-to-dark. Its wide range of timbral possibilities makes it ideal for a broad variety of dance music; you can use it to create the distinctive modulation that can be heard in acid house, or increase the resonance to bring out a sharp character that's appropriate for techno.

Analogue driver circuit:

Nubass is equipped with overdrive that uses an analogue circuit reminiscent of a classic stompbox. Turning the knob toward the right compresses the volume while causing mild distortion, adding thickness to your bass sounds. The tone knob also lets you adjust the crispness of the high-frequency range.

A 16-step sequencer that lets you automate parameters:

The Volca Nubass is equipped with a full-fledged 16-step sequencer with a variety of functionality; by using it in conjunction with a rhythm machine, you can construct rhythm tracks or loop music.

You can use the 16 buttons for step input just like the rest of the Volca series, or play the buttons as a keyboard for realtime recording. The chain function lets you play back multiple sequence patterns in succession, allowing you to loop up to 16 sequences.

Three functions to create grooves on Volca Nubass:

The sequencer of the Volca Nubass provides three functions that add the slap and slide performance techniques that are distinctive of acid bass: these transpose, accent, and slide functions are accessible and controllable through the step sequencer.

Transpose is a function that plays a note one or two octaves higher; it adds movement to the bass line while staying within the original scale. Accent emphasizes a note, creating dynamics that make the rhythm expressive. And the slide function that's indispensable to acid sound creates a smooth transition to the next note. Use these functions to add a sense of groove, and Volca Nubass will come alive in your performances and compositions.

Free bundle of music software:

The Volca Nubass comes with a diverse variety of music software from Izotope including "Ozone Elements" which lets you not only create songs but also master them using AI, "Skoove" which will help you improve your keyboard playing skills, "Reason Lite" DAW software, as well as software synths from KORG and other brands.
Read more
 More than 10 in stock $185.04
Cat: 715950 Rel: 18 Feb 19 • View all Synthesisers
 
Compact patch-based synth, ideal for beginners
Notes: A semi-modular analogue synthesizer that makes modular synthesis more accessible and understandable than ever before.

Creating new sounds that don't exist in the outside world is an unending dream which has continued since the birth of electronic musical instruments. This dream has evolved and expanded throughout the development of new and unique music production devices.

The popularity of modular synthesizers around the world has generated new excitement and interest in the so-called "West Coast style" of synthesis that deviates from traditional synthesis norms.

The compact body of this volca synth features eight modules and 50 patch points. While learning the basics of a modular synth, you can use popular features of the volca synthesizer line to control a unique and different flavour of analogue sounds.

Eight modules:

The volca modular is a semi-modular synthesizer consisting of independent analogue synth modules, digital effects, and a sequencer. Each of the modules has been carefully selected for its stand-alone completeness. The modules are internally connected so that sound can be produced even before connecting the included pin cables, and the routing is shown by white lines on the panel. Module connections via a pin cable take priority over the internal connections, bypassing them.

A fusion of West Coast style in a volca format:

Analog synthesizers in which a simple oscillator such as a saw wave or square wave is modified by a filter are referred to as "East Coast style" because of their origin from well-known American manufacturers. Synths of this style, as exemplified by the MS-20, have continued to evolve toward a goal of being used in many mainstream musical genres, thus being equipped with a keyboard for performance. Their sounds are notable for sharp filters and rich presence, and can be heard in many well-known songs.

Patching allows infinite possibilities:

volca modular's modules are connected via the included pin cables, allowing a diverse range of combinations. The unit's compact chassis provides 50 patch points. Inputs and outputs are color-coded for recognition at a glance, and the signals are also marked by symbols to indicate audio, control, gate or trigger. Normally, each signal is connected according to its use, but on the volca modular, signal levels are universally compatible between modules, allowing hidden possibilities to arise from patching that defies common sense. Twenty pin cables are included, and also included is a reference sheet explaining each patch point and providing basic examples of patching.

Sixteen-step sequencer that can automate parameters:

While the volca modular is a semi-modular synth, it is equipped with a full-fledged 16-step sequencer providing a wide range of functions, letting you enjoy automatic performance even when used stand-alone.

Using the 16 buttons familiar from the volca series, you can perform step input or use the buttons as a keyboard for realtime recording. The pattern chaining function plays back multiple sequence patterns in succession, allowing you to connect up to 16 sequences with up to 32, 64, or even 256 steps to create large-scale development.

Randomize function that can generate accidental ideas:

The sequencer of the volca modular lets you specify randomization for notes, active steps, and micro tuning. Irregular phrases, rhythms, and scaling that would be unlikely to come to mind can be generated by applying randomness, letting the volca be a source of unknown ideas.

Two new modes added for sequence playback:

Two new sequence modes have been added: bounce sequence mode which makes a round trip through the steps, and stochastic sequence mode which gradually proceeds while randomly moving forward and backward. Playing back a recorded sequence in a different form can add dramatic changes to your song or performance.

Musically advanced scales, keys, and micro tuning:

Although the volca modular is a West Coast style synthesizer, it also provides flexible support for music as a contemporary instrument. You can choose from 14 types of scale including equal temperament. Since you can also specify the tonic key from which these scales start, you can play these scales in any key.

There's also a micro tuning function that lets you individually specify the pitch of each note. You can pursue your own unique music by performing in an original tuning with the pitch of individual notes raised or lowered.

Connectors that allow synchronized performance and external control:

With a sync jack that allows easy connection to a Korg groove machine, you can connect the volca modular to another volca series unit, a minilogue, monologue, or prologue, an electribe, or the SQ-1, and enjoy sessions with the sequencer synchronized to the playback.
Read more
 3 in stock $154.95
KRK
Cat: 718660 Rel: 01 Apr 19 • View all Studio monitors
 
Professional grade 5" (bi-amp) studio monitor designed & engineered in the USA
Notes: The new 5" KRK ROKIT RP5 Generation 4 ("G4") bi-amp professional monitor takes music and sound creativity to a whole new industry-level. DSP-driven room tuning with 25 visual Graphic EQ settings on an LCD, combined with the included KRK App help minimize and correct problems in your acoustic environment. Matching drivers made with Kevlar ensures the same sonic integrity on every single frequency, minimizes listening-fatigue, and offers an incredibly balanced listening experience.

A scientifically designed high-quality speaker enclosure and newly-designed front-firing port offer exceptional low-end extension, punch and flexible room-positioning. High density Iso-foam pads decouple the speaker from the surface for improved clarity while fluid mechanics fully tuned to the entire system result in a deep and dynamic listening "sweet-spot" with incredible imaging and 3D soundstage.

A new custom designed efficient class D power amp reduces operating temperatures to retain better audio integrity while a built-in Brickwall limiter automatically engages at maximum amp-level to maintain a balanced sound, protect the system, and offer better and wider dynamics. Although truly affordable, price isn't even in the ROKIT conversation-professionals choose ROKITs for their time-tested and reliable results. The new ROKIT Generation 4 Line actually is ROKIT Science.
Read more
 6 in stock $161.23
KRK
Cat: 718670 Rel: 01 Apr 19 • View all Studio monitors
 
Professional grade 7" (bi-amp) studio monitor designed & engineered in the USA
Notes: Hugely popular for a reason. You know what you're getting with Rokits: decent sound and great value. Plus they've got yellow cones, which is frankly a bonus.

Supplier notes:
The new 7" KRK ROKIT RP7 Generation 4 ("G4") bi-amp professional monitor takes music and sound creativity to a whole new industry-level. DSP-driven room tuning with 25 visual Graphic EQ settings on an LCD, combined with the included KRK App help minimize and correct problems in your acoustic environment. Matching drivers made with Kevlar ensures the same sonic integrity on every single frequency, minimizes listening-fatigue, and offers an incredibly balanced listening experience.

A scientifically designed high-quality speaker enclosure and newly-designed front-firing port offer exceptional low-end extension, punch and flexible room-positioning. High density Iso-foam pads decouple the speaker from the surface for improved clarity while fluid mechanics fully tuned to the entire system result in a deep and dynamic listening "sweet-spot" with incredible imaging and 3D soundstage.

A new custom designed efficient class D power amp reduces operating temperatures to retain better audio integrity while a built-in Brickwall limiter automatically engages at maximum amp-level to maintain a balanced sound, protect the system, and offer better and wider dynamics. Although truly affordable, price isn't even in the ROKIT conversation-professionals choose ROKITs for their time-tested and reliable results. The new ROKIT Generation 4 Line actually is ROKIT Science.
Read more
 More than 10 in stock $192.50
Cat: 707872 Rel: 06 Dec 18 • View all Synthesisers
 
Desktop synth with 4 sub-oscillators
Notes: The Lumanoise V4 has 4 trautonium-like sub-oscillators. T Master oscillator under LDR control and 4 sub-oscillators were used, where you can set the division frequency of the T Master Oscillator Divider. Each oscillator has a volume pot. It's possible to connect an external LDR, a pot, a variable resistor or a high/mid/low switch for the T Master oscillator range. The filter cut-off of the 12 db low pass resonant filter can be controlled by the potentiometer or the photoresistor.
Read more
 1 in stock $161.22
Cat: 717750 Rel: 22 Jan 19 • View all DJ equipment cases
 
Heavy duty hard case for Pioneer XDJRR2
Notes: Customized to hold the Pioneer XDJ-RR2 DJ-Controller. Crafted from 9 mm vinyl laminated plywood, sturdy aluminium profiles and heavy duty butterfly latches, this case provides ultimate protection for mobile use on the road.
Read more
 1 in stock $154.73
Malekko Quad VCA Module (synth module)
Cat: 676895 Rel: 17 May 19 • View all Synth modules
 
4-channel, advanced voltage controlled amplifier - 8HP
Notes: Quad VCA is a 4-channel, advanced voltage controlled amplifier with an analog signal path that can either be used stand-alone, or in tandem with the Varigate 4+ and 8+ for multiple preset recall over the power bus. Input channels 2-4 are normalled to 1 and Scan Mode allows for complex level and modulation routing. Each channel includes a mute function and all outputs are summed to a mix output. To adjust level and CV modulation per channel, use the Select Channel buttons and then adjust the Offset and Attenuverter controls. Scan Mode includes two functions. Scan: Insert 4 inputs, 1 CV and monitor Mix output for 4:1 scanning. Pan: Insert an input into Ch 1 and Ch 1 CV will route input to up to 4 different outputs. Offset and Attenuation can be adjusted to control how incoming CV is applied. The Remote switch allows you to access saved presets when paired with Varigate 8+ (100 presets) or Varigate 4+ (16 presets). In stand-alone mode, all settings are auto-saved.
Read more
 4 in stock $178.54
The Complete Collection 1980-1988 (180 gram vinyl 5xLP box + booklet)
Cat: MW 068. Rel: 06 Dec 18
Coldwave/Synth
  1. Just Because... (LP1: Just Because) (4:54)
  2. Sticks In My Brain (2:51)
  3. Under Nylon (2:59)
  4. Take A Look (3:41)
  5. Soft Images (4:00)
  6. Brittle Hero (2:55)
  7. Dirty Hands (3:34)
  8. Willy Nilly (3:03)
  9. Lovely Monster (3:01)
  10. Welcome To The Dissidents (2:40)
  11. Pure Delight (3:09)
  12. Mouvement (2:32)
  13. Bent At The Window (3:29)
  14. You Are My Jail (LP2: Sleep Is A Luxury) (3:52)
  15. It's So (3:53)
  16. I Met The Best (3:39)
  17. Hidden Inside (2:50)
  18. Andrei Roublev (3:27)
  19. Doron Doron (2:57)
  20. Hunted (4:13)
  21. Not Waiting (3:45)
  22. Broken Memory (2:33)
  23. The Light Goes Through My Mouth (3:17)
  24. Love On My Side (5:56)
  25. Just Because (LP3: Inedits 1981-1983) (4:45)
  26. No Hands (1:41)
  27. Wagui (2:59)
  28. Never Never (3:06)
  29. I Love The Lovers (3:18)
  30. Other Souvenir (3:07)
  31. Unchanged (version) (2:38)
  32. Not Such A Joke (2:35)
  33. Without Face (5:48)
  34. Meine Liebe (2:18)
  35. Shake Your Flowers (2:48)
  36. Makes Me Blind (2:18)
  37. It's No Use (3:35)
  38. Moons & Mouths (LP4: Hot Paradox) (4:31)
  39. Hot Paradox (4:58)
  40. My Analyst "Assez" (3:46)
  41. Pressure (4:17)
  42. Berlin Wall (4:59)
  43. He Saw The Light (4:24)
  44. Inside Out (4:24)
  45. I Never Tried (5:19)
  46. Where To Find It (4:58)
  47. Like A Lion (3:27)
  48. 22£ (LP5: Accident Of Stars) (3:14)
  49. No Crying (2:22)
  50. He Calls The Sky Hector (3:24)
  51. Bit Of Smile (3:16)
  52. Lonely In His Farm (3:36)
  53. Your Passion (3:37)
  54. Position (2:10)
  55. Searchin' (3:28)
  56. Top Of The Pyramids (4:08)
  57. Lost & Late (3:00)
  58. War Game (2:18)
  59. Accident Of Stars (4:46)
 in stock $166.63
Cat: 715352 Rel: 31 Dec 18 • View all Portable speakers
 
Compact size portable bluetooth speaker
Notes: The only Speaker you will ever need with up to 100 hours of battery life!

Using the latest technology and high quality design we bring to you the ALL NEW MINIRIG 3 bluetooth rechargeable speaker.

All Minirig 3 Bluetooth speakers come with an audio cable, charger cable, case, and a whole lot of bass and good times!
Read more
 3 in stock $151.44
Items 1 to 50 of 87 on page 1 of 2
1  2  »

Filter

Saved Searches
Save current search
Release Date
Close