100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 337 on page 1 of 7
1  2  3  4  5  6  7  »
FORTHCOMING
1999
1999 (LP box + DVD)
Cat: 060349 7850051. Rel: 29 Nov 19
 
Funk
coming soon $228.83
FORTHCOMING
The Singles Collection
The Singles Collection (23x7" box set)
Cat: 472617 1. Rel: 22 Nov 19
 
50s/60s
coming soon $207.24
FORTHCOMING
The Columbia Album Collection
Cat: 190759 23242. Rel: 15 Nov 19
 
Experimental/Electronic
coming soon $298.99
FORTHCOMING
Hittin' The Ramp: The Early Years 1936-1943
Cat: HLP 9042. Rel: 01 Nov 19
 
Jazz
coming soon $204.00
FORTHCOMING
AIAIAI TMA2 Reflective Limited Edition Preset Modular Headphones
coming soon $215.87
FORTHCOMING
Flame Panmix Dual Panning Recorder Module
Cat: 749823 Rel: 31 Oct 19 • View all Synth modules
 
Dual channel stereo panner with automation
Notes: The FLAME "PANMIX" module contains two independent panning mixers with one input each on two outputs left/right and is designed for audio or CV sources in the voltage range +-5v (audio modular level). In addition, the 2 inputs can be switched separately to +6db audio (for external audio line level sources) using the slide switch on the rear panel.

The movements of the two mix controls can be recorded. The recording time per channel is more than one minute. The playback speed can be adjusted in playback. The recorded track is played back once when the Play button is pressed briefly (one shot) or in the loop when the button is pressed a little longer.

Both panning channels have a separate reset input as well as a separate CV input (+-5V ) for controlling the mix e.g. by an LFO. The track data remains permanently stored (battery buffered memory).

In addition, there are three further audio/CV signal inputs (a mono and stereo left+right), which are routed directly to the output and mixed together with the two PAN channels. This allows you to mix in other sources directly and e.g. connect two or more "PANMIX" modules together.
Read more
coming soon $204.01
FORTHCOMING
Singles Collection Vol 2
Singles Collection Vol 2 (hand-numbered coloured vinyl 9x7" box limited to 100 copies)
Cat: AR 45BOX002. Rel: 28 Oct 19
 
Rock
coming soon $295.75
FORTHCOMING
Doepfer A-187-1 Voltage Controlled DSP Effects Module
Cat: 751766 Rel: 23 Oct 19 • View all Synth modules
 
DSP based effects module - 18HP
Notes: Module A-187-1 is a DSP based effects module. Four parameters of the selected digital effect are voltage controlled. The main effect (e.g. reverb, delay, pitch-shifter, equalizer) is selected by the two small buttons effect up/down. The upper row of the display shows the effect that is currently selected. In the lower row the four parameters are shown as well as a small bar left from the abbreviation that displays the current parameter value. Each parameter can be adjusted manually (upper potentiometer row) and modified by external control voltages (lower row of the potentiometers and upper row of the sockets). The lower row of the sockets contains the two audio inputs and outputs.

Another button (bypass) is used to turn the effect on/off. When bypass is chosen the upper line of the display shows in turn "BYPASS" and the name of the pre-selected effect. In the bypass mode another effect can be pre-selected and called-up by pressing the bypass button again. Even the effect parameters can be adjusted and are displayed with the bar graphs. But they become effective not before the bypass mode is left.

The module is equipped with two audio inputs and two audio outputs because the DSP board features stereo audio processing. The audio inputs can process usual A-100 signal levels without clipping/distortion. For higher levels external attenuators (e.g. A-183-1) or VCAs may be used.

A ready-made DSP board is used inside the A-187-1 module. Consequently, only these effects and parameters are available that are supported by the DSP module. Some parameters can be changed only in steps or with audible artefacts. The DSP board has 20 Bit DA and AD converter with 32 kHz sample rate available. The inter sound processing uses 24 Bit.
Read more
coming soon $262.30
Cat: 734884 Rel: 15 Oct 19 • View all Synth modules
 
6HP VCO with auto-tuning & octave shift
Notes: The Endorphin.es Godspeed is sort of the single oscillator version of the famous Furthrrr Generator. From its big brother it takes over the digital Thru-Zero core and the legendary wavefolder. But it also has new features like a sub-oscillator output and an immensely practical autotune function.

Especially for people starting with a modular system this oscillator is highly recommended. On 6HP it delivers all the features (and more) needed for diving into the depths of West-Coast-Synthesis!
Read more
 1 in stock $253.65
Click for better price!
quote 734884
Cat: 749862 Rel: 15 Oct 19 • View all Synthesisers
 
Four-part polyphonic desktop synthesiser with virtual analogue synthesis
Notes: Tiny but powerful module from British synth brand known for big-budget analogue keyboards. Virtual analogue this time, with built-in sequencer and arpeggiator. Big sound in a small box.

Supplier notes:
Sculpt and shape your sound with total control. The Modal Electronics SKULPT Synthesiser is a compact analogue synth providing a hands-on approach to sound design.

The Modal Electronics SKULPT features 32 oscillators in total, with 8 oscillators per voice with two selectable morphable waveforms. The intuitive design features a 16-key touch MIDI keyboard that allows you to create and audition sounds on the fly.

It also features a built-in sequencer and arpeggiator and an 8-slot modulation matrix with 37 destinations in total. Create everything from classic bassline sounds to cutting-edge pads and leads. Capture your inspiration when it strikes with the SKULPT synthesiser.
Read more
 5 in stock $290.36
Click for better price!
quote 749862
FORTHCOMING
Ultimate Italo Disco Fan Box
VARIOUS
Cat: ZYXBOX 045.
 
Disco/Nu-Disco
coming soon $228.83
FORTHCOMING
M Audio Air 192/14 USB Audio & MIDI Interface M Audio Air 192/14 USB Audio & MIDI Interface M Audio Air 192/14 USB Audio & MIDI Interface
 
8-in/4-out 24/192 USB audio interface
Notes: Conquer any recording session with professional studio quality and features:

The M-Audio AIR 192|14 is an 8-in 4-out feature-packed USB audio/MIDI interface that provides all the connections and software you need to easily create professional 24-bit/192kHz studio-quality recordings. The AIR 192|14 features (4) XLR+1/4" TRS combo inputs, (2) 1/4" line inputs and (2) 1/4" instrument inputs that have a specially designed gain and impedance stage to provide the most accurate representation of your guitar or bass when plugged directly into the interface. There is also MIDI input and output connections so you can connect any external midi gear that you may have such as external sequencers, drum machines and controllers.

We've included software to match your style:

The AIR 192|14 comes complete with a software package that has everything to get you started making professional recordings right out of the box. With 2 powerful DAWs to suit your production needs, AIR 192|14 includes Pro Tools | First M-Audio Edition, and Ableton Live Lite. This amazing audio and MIDI recording software will inspire you to create, record and share your ideas across the world at any time.

We've also added an entire Effects Plugin, Virtual Instruments and Loop package to cater to all your production needs. Whether you need a guitar tone, reverb, or delay we've got your effects needs covered with Eleven Lite, 20 effect plugins and AIR's Creative FX Collection Plus. With the included AIR Virtual Instrument plugins, you'll have a virtual drummer, drum machine, synth, strings, percussion, organ and piano plugins to add world-class-sounding instruments to your songs with ease.

Hear the Performance Now - Not a Second Later:

When recording, you want to focus on capturing that perfect moment, and getting the best performance out of your artist and talent. You don't want to be bogged down by "clicks," "pops" or latency. The AIR 192|14 not only features a high-speed USB connection for providing the lowest round trip latency (2.59ms) between your machine and your hardware, but it also features monitor mix control for listening directly to the source inputs, providing you with zero-latency technology.

Connect Anything and Everything:

The AIR 192|14 features 8 inputs for simultaneously recording up to 8 channels at once to meet all your studio's recording needs. The (4) dedicated XLR/TRS Mic/Line combo inputs with Crystal Preamps and phantom power are perfect for recording a vocals, mic'ing up an acoustic guitar, vintage guitar or bass amp or the core elements of a drum kit. The (2) 1/4" dedicated Instrument inputs use specially designed to provide the cleanest signal from your guitar, bass or keyboard, while the (2) 1/4" dedicated Line inputs provide a pure uncoloured signal for connecting a tube preamp, keyboard, synth or mixer, and MIDI input and output for connecting any of your boutique synth gear.

Mix, Monitor and Provide:

At the centre of the AIR 192|14 is a large metal monitor volume knob with inlayed rubberized diamond textured comfort grip for dialling in your studio monitor's volume, and smoothly referencing your mix at both high and low levels. The monitor and headphone outputs feature a direct mono/stereo switch and direct/USB mix knob. The (2) 1/4" headphone outputs have independent volume controls, and source select switches let you create mixes to suit your and your artist's needs. In addition to the (2) 1/4" rear panel monitor outputs, the AIR 192|14 offers an additional (2) 1/4" outputs for connecting outboard gear.

Crystal Preamps, Pristine A/D Converters and Premium Components:

Our engineers designed the Crystal Preamps to provide engineers, producers and musicians with a transparent, low-noise preamp that guarantees the best sound from your microphones and captures your performance exactly the way you intended. The AIR 192|14 incorporates pristine A/D converters to provide 24-bit resolution digital audio for explosive dynamic range that captures every nuance and subtlety of your performance.

Segmented VU Meters for Dialling in Your Best Signal:

When capturing a performance, you want to get the best levels possible. With the AIR 192|14's segmented input VU LEDs (-20db through 0dB), you can dial in the perfect gain setting every time, so there's no more guessing how close or far away you are from optimizing your signal.

What's In The Box:

- AIR 192|14
- USB-C-to-USB-C Cable
- USB-C-to-USB-A Cable
- (2) 1/8" (3.5 mm) to MIDI Adapters
- Software Download Cards
- User Guide
- Safety and Warranty Manual
Read more
MRP:$349.72 SAVE 17%
coming soon $291.43
Cat: 743356 Rel: 10 Oct 19 • View all Effects pedals
 
Bass simulator effects pedal for guitar with 9 voices, dry & effect mix knobs, sensitivity & control knobs
Notes: The polyphonic BASS9 Bass Machine transforms a guitar into nine different basses and requires no special pickups, MIDI or instrument modifications. It relies on the same technology powering all EHX 9 Series pedals, like the award winning MEL9 Tape Replay Machine, but features a new algorithm maximized for transposing one to two octaves down with superior dynamics and tracking.

A rotary switch allows the user to select the sound of their choice, as follows:

- PRECISION: Pays homage to the iconic Fender P Bass
- LONGHORN: Emulates the Danelectro 6-string bass, ideal for baritone type tones
- FRETLESS: Features both electric and standup fretless basses.
- SYNTH: A tribute to the classic Taurusr Synthesizer
- VIRTUAL: Lets the user adjust the bass's body density and neck length for a variety of bass sounds
- BOWED: Classic bowed bass
- SPLIT BASS: Makes it possible for the guitarist to play bass on the lower strings (all notes below F#3) and chords or melody with the higher strings.
- 3:03: A polyphonic salute to the sought-after Roland TB-303 vintage bass synth
- FLIP-FLOP: Inspired by EHX's Octave Multiplexer, it provides a '70s style logic driven sub-octave generator that tracks without glitches.

The pedal is equipped with independent Effect and Dry volume controls so guitarists can precisely tune their mix at the Effects output jack, plus an always-active Dry output jack that outputs the input signal at unity gain.

Controls 1 and 2 have been designed to adjust specific parameters for each of the nine programs. For example, in PRECISION, CTRL 1 controls the sub-octaves while CTRL 2 imitates the original instrument's tone control.

The BASS9 comes equipped with a standard EHX 9.6DC200mA power supply.
Read more
 2 in stock $221.28
Click for better price!
quote 743356
Cat: 739889 Rel: 02 Oct 19 • View all Synth modules
 
Four-channel precision adder, buffered mult, and transposition tool
Notes: Quantus Pax is a four-channel precision adder, buffered multiple, and polyphonic transposition utility. Each channel has two CV inputs and can be further modified by the three Xpose inputs. QP is made with high quality low-tolerance resistors for unbeatable accuracy. Patch-wide key changes, polyphonic movement, mathematically derived melodies, and more are all to be had with this simple but useful utility.
Read more
 3 in stock $255.82
Click for better price!
quote 739889
FORTHCOMING
L'integrale (Deluxe)
L'integrale (Deluxe) (limited numbered 180 gram vinyl 13xLP + DVD + slipmat + poster)
Cat: BEC 5650119.
 
Coldwave/Synth
  1. Rita Mitsouko
  2. The No Comprendo
  3. Marc & Robert
  4. Re
  5. Systeme D
  6. Acoustiques
  7. Cool Frenesie
  8. La Femme Trombone
  9. En Concert Avec L'Orchestre Lamoureux
  10. Variety
coming soon $293.59
FORTHCOMING
Befaco i4 Instrument Interface Preamp Module (assembled)
MRP:$283.67 SAVE 17%
coming soon $236.39
FORTHCOMING
Mooer GE150 Amp Modelling & Multi Effects Pedal Mooer GE150 Amp Modelling & Multi Effects Pedal Mooer GE150 Amp Modelling & Multi Effects Pedal Mooer GE150 Amp Modelling & Multi Effects Pedal
Cat: 748617 • View all Effects pedals
 
Multi-effects processor featuring 55 high quality amp models
Notes: The MOOER GE150 is the newest entry in the GE line of multi-effects pedals from MOOER. The GE150 comes packed with 55 high-quality amp models and 151 different effects, a straight forward and intuitive UI, topped off with a fully-functioning expression pedal. With OTG capabilities, users can record directly into a compatible device from anywhere!

Read more
coming soon $205.08
FORTHCOMING
Mackie Pro FX10 v3 Mixer With Built In Effects, USB Recording Interface & Software Bundle Mackie Pro FX10 v3 Mixer With Built In Effects, USB Recording Interface & Software Bundle Mackie Pro FX10 v3 Mixer With Built In Effects, USB Recording Interface & Software Bundle Mackie Pro FX10 v3 Mixer With Built In Effects, USB Recording Interface & Software Bundle Mackie Pro FX10 v3 Mixer With Built In Effects, USB Recording Interface & Software Bundle Mackie Pro FX10 v3 Mixer With Built In Effects, USB Recording Interface & Software Bundle
Notes: The Mackie ProFX10 v3 10-Channel Professional Effects Mixer with USB is the ultimate affordable solution for live sound, home recording, and content creators. Now with our renowned Onyx mic preamps that offer 60db of headroom, everything from gain hungry mics to guitars will sound better than ever, and you can keep it all in check with simple single-knob compression. The new GigFX effects engine offers 24 built-in FX for even more options for adding the finishing touch. Record your tracks in 24-Bit/192kHz quality with 2x4 USB I/O plus zero-latency hardware monitoring for easy overdubs. Both ProTools First and Waveform OEM recording software/plugin packages are included.
Read more
coming soon $229.92
Cat: 747621 Rel: 20 Sep 19 • View all Synth modules
 
8HP drum/percussion synth module
Notes: Originally inspired by audience applause, hip-hop samples, and classic drum machines, Fracture is a multi-particle percussion synthesizer that applies concepts from classic analogue clap circuits to granular synthesis methods.

It all starts from proprietary micro-samples we recorded specifically for this purpose and ends with an engine built to suit these samples.
Unlike our other percussion module, the Chimera which uses impulse rich samples as it's tonal centre, Fracture uses single impulse samples like Claps, Snaps, Ping Pong Balls, Opening a beer can, and many more. It then plays a group of similar samples back in a psuedo random order for unique hits. Density, Decay, and Tail affect tone and how "tight" your virtual clappers are to playing together.

Our goal was to design a clap percussion module covering the range from classic drum machine claps all the way to full audience applause. We ended up with a module that covers a huge range of timbres beyond claps. We hope this engine provides you with the tools to intuitively create wild percussion sounds that bring your system to life in a new way.
Read more
 5 in stock $240.70
Cat: 745481 Rel: 19 Sep 19 • View all Filters
 
Polivoks filter chip with CV & Expression pedal inputs
Notes: The Polivoks Filter, from Elta Music, utilizes the classic Soviet filter chip for a unique and iconic filter tone. It provides both CV and Expression pedal inputs, built in LFO, and WOB fader for ultimate control. On board LFO has a fast/slow range switch, and on/off. Separate LFO OUT can be used to control external CV devices. With lowpass, bandpass, highpass, and notch filter types, one can shape tones into whole new realms. The pedal is switched on with a switch, rather than a stomp button, catering towards use as a desktop filter.
Read more
 1 in stock $284.96
Click for better price!
quote 745481
Cat: 746361 Rel: 16 Sep 19 • View all Synth modules
 
Multiband distortion & VCA module
Notes: Distortion is fun, but it's even better when you split it up across the frequency spectrum. Seca Ruina takes an input, splits it up into three frequency bands, and lets you drive them into annihilation. SR includes a bypassable VCA on the output and CV over individual band and universal drive amount. With individual outputs for each band, you can process each band further externally. So much potential in only 6hp!
Read more
 1 in stock $205.08
Click for better price!
quote 746361
Cat: 752843 Rel: 19 Sep 19 • View all Filters
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Vintage Soviet synth circuitry reimagined. CV input, LFO output and pedal control for versatility. Easily one of the most brutal filters on the market. Legendary.

Supplier notes:
The Polivoks Filter, from Elta Music, utilizes the classic Soviet filter chip for a unique and iconic filter tone. It provides both CV and Expression pedal inputs, built in LFO, and WOB fader for ultimate control. On board LFO has a fast/slow range switch, and on/off. Separate LFO OUT can be used to control external CV devices. With lowpass, bandpass, highpass, and notch filter types, one can shape tones into whole new realms. The pedal is switched on with a switch, rather than a stomp button, catering towards use as a desktop filter.
Read more
 1 in stock $264.72
Cat: 746914 Rel: 11 Sep 19 • View all Handheld recorders
 
Four-track audio recording for music, film, podcasting & beyond
Notes: The H4n Pro isn't just improved, it's superior in every way. With advanced X/Y microphones, incredibly natural-sounding preamps, and a super-low noise floor, you can record everything from the Indy 500 to the fluttering of a hummingbird with extraordinary realism.

Welcome to the new gold standard in field recording.

The Filmmaker's Favourite:
The H4n Pro is packed with features that make it perfect for capturing audio for film. The onboard X/Y microphones deliver spectacular stereo imaging, and two combo input jacks allow you to use your favourite microphones as well. It also includes a headphone/line out jack to easily send high-definition stereo directly to your camera.

Unmatched In Concert:
The Pro is perfect for capturing live performances. Capable of handling up to 140 dB SPL, it can record everything from ear-splitting heavy metal to bass-heavy EDM. Take a line-level stereo feed from your mixing console and capture room ambience with the X/Y microphones to put your listeners front row centre.

Podcasters and Journalists:
The H4n Pro provides the essential combination of mic'ing versatility, portability, and superior audio necessary for impactful storytelling. With support for plug-in power, you can use a lavalier to mic up your subject for podcasts or interviews. Record time-stamped WAV files to sync with video footage in post-production, or embed superior audio directly on your video in real-time through a 1/8" stereo feed.

Mobile Studio:
With overdubbing and punch-in features, as well as studio-grade instrument effects and emulators, you can create songs from start to finish. The Pro also functions as a 2-input/2-output USB audio interface for PC or Mac. Launch your favourite recording/editing software or use the included Cubase LE to start creating.

High-Performance Mic Preamps:
The Pro features the same high performance, low-noise mic preamps as our acclaimed Zoom H5 and H6 Handy Recorders, with recording and playback at resolutions up to 24-bit/96 kHz. The improved noise floor (-120 dBu EIN) captures audio at lower volumes with less noise and fewer artefacts.

Built-in Stereo Recording:
X/Y stereo recording covers a wide area while capturing sound sources in the centre with clarity and definition. The angle of its two unidirectional condenser mics can easily be changed from 90 degrees for a tightly focused stereo image to 120 degrees for a wider image simply by twisting the mic capsules.

The H4n Pro provides an onboard MS decoder for Mid-Side recording with external microphones. This allows you to adjust the width of the stereo image, making it especially useful for sound design and broadcasting.

Inputs:
The two locking combo connectors accept either XLR or 1/4" balanced/unbalanced phone cables, handling mic- and line-level signals as well as instrument-level signals. Phantom Power of +24 or +48 volts can be applied to both inputs. Plus, there's a stereo 1/8" Mic jack for external audio sources, including lavalier microphones requiring 2.5 volts of plug-in power.

Outputs:
A stereo 1/8" Line/Phone Out, with dedicated volume control, allows for headphone monitoring or connection to your DSLR, while the built-in monophonic speaker allows for quick playback reference. In addition, a USB port enables fast file transfer, firmware updates, and use as a 2-in/2-out audio interface for computers.

Form Factor:
A new rubberized, ergonomic body is perfect for use in the field or with a camera, while new locking XLR/TRS connectors ensure your mic cables stay secure. Highly portable, the H4n Pro can travel anywhere for convenient mobile recording.

What's included with the H4n Pro:

- H4n Pro Handy Recorder
- Protective case
- 2 x AA batteries
- Operation manual
- Download license for Steinberg Cubase LE and WaveLab LE software
Read more
 4 in stock $256.89
Click for better price!
quote 746914
Cat: 744064 Rel: 12 Sep 19 • View all Synth modules
 
Digital wavetable oscillator - 16HP
Notes: Klang Stadt is the latest FC iteration of Electric Druid's VCDO digital wavetable oscillator. It features a number of advantages over the previous Waverider design:

- Improved PWM filtering
- Addition of Sub Two output
- Addition of Klang output
- Addition of Xmod feature
- Onboard LFO for riding the waves
Read more
 2 in stock $228.83
Click for better price!
quote 744064
Cat: 742229 Rel: 05 Sep 19 • View all Synth modules
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 2 in stock $281.72
Click for better price!
quote 742229
Cat: 742228 Rel: 05 Sep 19 • View all Synth modules
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: More aggro filth from the troubled minds at Schlappi Engineering. This time it's a distortion/filter module with touch-sensitive metal conductors for hands-on control. Screaming saturation and self-resonance ideal for angry techno. Nasty.

Supplier notes:
The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 2 in stock $275.25
Click for better price!
quote 742228
Genki Instruments Wave Ring Controller (Bluetooth MIDI controller)
Cat: 744609 Rel: 06 Sep 19 • View all MIDI controllers
 
Wearable Bluetooth MIDI controller
Notes: Wave is the ring that allows musicians to easily control sound, shape effects and send commands with the motion of their hands. It offers six functions that can be used individually or combined in any way you like: Tilt, Pan, Roll, Vibrato, Tap, Click.

Four different motions allow you to control any parameter in a new way. By tapping any surface you can trigger notes or samples. Easily accessible buttons on the ring allow you to cycle between presets, send commands and simply pause Wave so you can move your hands freely without changing anything.

You can easily customize each function to suit your setup. You can for example customize:

- Movement range
- Sensitivity of taps (how hard you need to hit the surface)
- CC values of output
- Which note values are sent out by taps and button clicks

Users can use Wave with Softwave, a software layer that allows users to intuitively map movements to MIDI messages or host AU/VST3 plugins and create their own presets. Softwave comes for free with every Wave and has a built-in synthesizer engine so users can start playing right away.

With the purchase of Wave users also receive access to Native Instrument's Reaktor Blocks which includes Waveblock. Waveblock connects Wave instantly to Blocks and allows users to combine Wave out of the box with Reaktor's powerful synthesis engine.

Wave also works as a stand alone MIDI controller that connects to your DAW. Each function can be mapped to control different parameters directly within your DAW.

The Wavefront module is the Eurorack receiver for Wave that allows Wave to connect to modular synthesizers. With Wavefront you can completely bypass the computer and bring unprecedented sound control, effect shaping and manipulation to modular setups.
Read more
 1 in stock $297.91
Click for better price!
quote 744609
FORTHCOMING
Rainger FX Dr Freakenstein's Chop Fuzz Pedal With Igor
coming soon $296.84
FORTHCOMING
Rainger FX Drone Rainger Digital Delay Pedal
coming soon $296.84
FORTHCOMING
The Complete Art Pepper At Ronnie Scott's June 1980
  1. Blues For Blanch
  2. Ophelia
  3. Make A List, Make A Wish
  4. Sad A Little Bit
  5. Ornithology
  6. Red Car
  7. Arthur's Blues
  8. Untitled #34
  9. Song For Richard
  10. Rhythm-a-ning
  11. Rita-San
  12. What's New
  13. I'll Remember April
  14. True Blues
  15. Ophelia
  16. Make A List, Make A Wish
  17. Stardust
  18. Red Car
  19. Straight Life
  20. YI Blues
  21. The Trip
  22. I'll Remember April
  23. Goodbye
  24. In A Mellow Tone
  25. Blues For The Fisherman
coming soon $215.87
Cat: 742231 Rel: 21 Aug 19 • View all Synth modules
 
Versatile band-pass filter - 12HP
Notes: TRSHMSTR is a collaborative effort between WMD and electro-dance heavyweights MSTRKRFT. TRSHMSTR features an aggressive combination of band-pass filtering (FLTR) and distortion (DRV). The FLTR and DRV sections can be used independently or together to produce a wide variety of tone-shaping, from subtle distress to full-on acid destruction. The INs and OUTs of the FLTR and DRV sections are cross-normalled, so you can run your signal through FLTR and into DRV or vice-versa with no extra patching.
Read more
 1 in stock $241.79
Click for better price!
quote 742231
Cat: 736453 Rel: 21 Aug 19 • View all Studio monitors
 
Single 2-Way active studio monitor with wave guide
Notes: Updated version of the hugely popular E8. Reshaped waveguide gives a broader sweet spot, while new bass drivers extend the bottom end. The originals were already great value - these are even better.

Supplier notes:
With their smooth, accurate frequency response; powerful amplification with tons of headroom; and acoustic tuning functions that ensure you always get the best sound... it's no wonder that the original Eris-series studio monitors have been a runaway hit since their introduction. The Eris E8 XT is a substantial update to a lauded classic. Deeper lows and a wider, more controlled sweet spot (thanks to its new EBM wave guide design) mean that our best-selling studio monitors just got even better.

Studio speaker with a wide sweet spot:

We outfitted the Eris XT studio monitors with a new EBM (Elliptical Boundary Modelled) wave guide designed by none other than Hugh Sarvis of WorxAudio, the mind behind our award-winning CDL loudspeakers and lauded R-Series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. It's ideal for group listening and collaboration - while narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.

Lows that go lower:

The familiar woven composite low-frequency driver still offers Eris' signature tight, clear bass; plenty of punch and no flub. Eris E8 XT studio monitors sport a ported enclosure that is larger than that of their predecessors, allowing them to reach down to an astonishing 35 Hz. That's 10 Hz below previous models - with no subwoofer required!

Set up your studio monitors for your room:

We know modern recording studios can be anywhere from a spare bedroom to a multi-million dollar facility; that's why every studio monitor we make is equipped with controls that ensure the flattest response in your mix environment. Acoustic tuning controls allow you to configure the Eris E8 XT perfectly for your room - you get Low-cut, Mid, and High controls, as well as 3-way acoustic space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.

Studio monitor connections:

It's easy to feed audio to your Eris E8 XT studio monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E8 XT monitors provide balanced XLR, balanced 1/4" TRS, and unbalanced RCA line-level inputs. You'll have no problem hooking your Eris speakers up to virtually anything.

Accuracy defined:

Suitable for both home recording studios and professional mix engineering, the Eris XT studio monitors combine sterling audio quality with the flexible tuning and connectivity you've come to expect from PreSonus. It's Eris, remastered.
Read more
 2 in stock $243.95
Click for better price!
quote 736453
FORTHCOMING
WMD Voltera Voltage Expander For Metron Module
Cat: 742232 • View all Synth modules
 
4HP voltage expander module for the METRON trigger & gate sequencer
Notes: Voltera is a voltage expander module for the METRON trigger and gate sequencer and adds 4 bipolar voltage tracks in 4hp. Up to 16 Volteras can be added to a single METRON giving you up to 64 CV Sequencing lanes for your Eurorack modular system!

With independent voltage ranges and quantize settings per track, Voltera allows for real time control over 4 different parameters at once, allowing you to dial that track to the parameter you are sequencing.

Sequence melodies, modulate parameters, and more with ease by adding Voltera to your METRON set up.
Read more
coming soon $210.49
Cat: 741570 Rel: 29 Jul 19 • View all Synth modules
 
Dynamic rhythm generator module
Notes: Integra Funkitus takes up to four input rhythms and combines and modifies them into rhythm outputs. There are three modes: two based on probability and one on generalized logic combinations.

Feed up to four rhythms from a rhythm module (such as Numeric Repetitor) into the inputs.

Connect the gate outputs to percussion modules, then turn the knobs to control how the rhythms are combined and modified.

Size: 8HP Eurorack
Depth: 1 Inch
Power: 2x5 Eurorack
Draw +12V: 50 mA
Draw -12: 5 mA
Read more
 3 in stock $237.46
Click for better price!
quote 741570
FORTHCOMING
Sismo Samba Legacy Analogue Synthesiser & Sequencer Module Sismo Samba Legacy Analogue Synthesiser & Sequencer Module
Cat: 735346 • View all Synth modules
 
Rhythmic 8 steps tap sequencer - 8HP
Notes: SAMBA Legacy is a rhythmic 8 steps tap sequencer with three CV in. Each time you tap, add more steps.

SAMBA Legacy works as a passive module, used by external clock - include an analogue drum synth with bass and percussion rhythms.

This module also can be used powerless.

There is a Sync in-out and a synth part (square and noise) which brings different rhythmic flavours multiply by a low tone sine wave.

Power on, Plug the clock, tap the buttons and let's Samba!

8HP width
28mm deep
4mA +12V
Read more
coming soon $248.26
Cat: 734840 Rel: 15 Jul 19 • View all Synth modules
 
Analogue VCO focused on all aspects of modulation - 12HP
Notes: The OSC1 from Future Sound Systems presents a voltage-controlled analogue oscillator with a few features unexpected of a basic oscillator, with a particular focus on covering all bases of signal modulation. Once triangle, sinusoidal and pulse waveforms are derived from its sawtooth core, each waveform is passed through a VCA. The outputs from these VCAs are then summed at the Mix output, which can be switched between 2- and 4-quadrant-multiplication modes. These two QM modes allow for a plethora of amplitude modulation effects to be achieved. Level controls for each waveform dictate both static level, but also depth of modulation through careful design of the control summation. Each individual waveform output is taken pre-VCA for maximum patching flexibility.

Shape modulation of the triangular, sinusoidal and pulse waveforms is also available. Both the triangular and sinusoidal waveshapes can be skewed forward or backward into ramp-like shapes, whilst shaping the pulse wave gives standard pulsewidth modulation.

Frequency modulation is available in both Linear and Exponential modes. The OSC1 also tracks to 1V/Octave over four octaves in its audible (HF) range, but can also be used as a low frequency oscillator in LF mode.

A Sync input allows for the OSC1 to be reset by an external signal. A rising edge will reset the sawtooth wave to its peak, from which it descends. The Inject input, meanwhile, allows for external signals to interfere with the sawtooth core. This allows for intermodulation-type effects to be produced, and opens new realms of chaotic oscillations.
Read more
 3 in stock $247.19
Click for better price!
quote 734840
Cat: 739134 Rel: 16 Jul 19 • View all Synth modules
 
Random looping sequencer - silver faceplate, 12HP
Notes: Permutation is a set of random sequencers that use a digital shift register to generate unpredictable CV and gate patterns that can be locked into repeating loops. The concept is based on the Turing Machine, an open source module designed by Tom Whitwell.

Permutation retains the core functionality of the Turing Machine while adding new features such as dedicated outputs for each bit of the shift register, CV inputs for all parameters, and an internal bipolar VCA. Locked sequences are also saved across power cycles.
Read more
 1 in stock $230.98
Cat: 736449 Rel: 15 Jul 19 • View all Synth modules
 
Facilitates effects processing between eurorack, guitar pedals & electronic instruments
Notes: Want to connect outboard gear to your eurorack synthesizer without taking up valuable HP in your case? The INTRFX allows eurorack-level signals to be processed with pedals and/or outboard effects, and also allows line-level instruments to be processed with eurorack modules. Each of its three channels has an Interchange Switch to swap this mode, as well as an FX Blend parameter which can be controlled via CV. Because of its compact physical design, the INTRFX can be placed almost anywhere and connected to eurorack systems with 3.5mm patch cables rather than bulkier 1/4-in cables.

Feedback effects can be achieved by switching into the "wrong" mode, sending the FX return back into the FX send, while still allowing for dry signal blend and modulation. Channels can also be patched into one another and toggled between modes for experimental routing. Conveniently, each channel can operate as a reversed linear VCA for both audio and DC signals if no effects are used.

Whether you'd like to patch eurorack through some classic pedals or run a drum machine through your gnarliest modules, INTRFX makes these connections easy and flexible.
Read more
 7 in stock $204.01
Cat: 734882 Rel: 18 Jul 19 • View all Synth modules
 
High-quality dual linear VCA with mixing functionalities
Notes: Audiophile Circuits League VC Dual Amp contains two fully discrete voltage controllable amplifiers with linear characteristic. It is based on a new circuit design which delivers unheard clarity of sound. To this day there is no other VCA using this special technique!

The module offers a very low harmonic distortion in the whole linear gain range, no crossover distortion and no overshoots nor ringing. Furthermore, it has a very high dynamic range which provides a lot of headroom. The VCAs will amplify the input signal very accurately and it will sound crystal clear, without any coloration, distortion or bleed. Each channel has a Gain potentiometer for manually setting the VCA's initial gain and a control voltage input which is equipped with an attenuverter for scaling the modulation.

Thanks to normalized signal and CV inputs, both VCAs can be used in conjunction - great for processing stereo material. Furthermore, you can create voltage controlled panning effects and crossfades in next to no time. Beside the two individual audio outputs from each VCA, there is a Sum-output which provides the mix of the output of both VCAs and of the signal coming from the Aux-input. This additional input has no level control and is mixed at unity gain. Thus three different signals can be mixed together.

The amplifiers are also suitable for processing control voltages thanks to a completely DC-coupled signal path. Behind its simple appearance, this module shines with its functionality and sound quality!
Read more
 1 in stock $292.51
Click for better price!
quote 734882
Cat: 731220 Rel: 15 Jul 19 • View all Synth modules
 
Expander for the Demon Core Oscillator - 8HP
Notes: This module brings polyphonic control to the Demon Core oscillator.

The stacks can be divided between up to 16 polyphonic voices via MIDI or four 1V/oct inputs with attenuator. The oscillator can be set in continuous streaming mode or in MIDI gating mode with an ADSR envelope for each polyphonic voice.

The time sync can be also triggered via MIDI for each voice.
Read more
 1 in stock $256.89
Click for better price!
quote 731220
Cat: 739136 Rel: 16 Jul 19 • View all Synth modules
 
Random looping sequencer - silver faceplate, 6HP
Notes: Permutation is a set of random sequencers that use a digital shift register to generate unpredictable CV and gate patterns that can be locked into repeating loops. The concept is based on the Turing Machine, an open source module designed by Tom Whitwell.

Permutation retains the core functionality of the Turing Machine while adding new features such as dedicated outputs for each bit of the shift register, CV inputs for all parameters, and an internal bipolar VCA. Locked sequences are also saved across power cycles.
Read more
 1 in stock $201.84
Click for better price!
quote 739136
Items 1 to 50 of 337 on page 1 of 7
1  2  3  4  5  6  7  »

Filter

Saved Searches
Save current search
Release Date
Close