100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 15 of 15 on page 1 of 1
Cat: 625059 Rel: 22 Sep 16 • View all Synth modules
 
Mini Mod VCF Transistor Ladder Filter Module
 2 in stock $206.45
Click for better price!
quote 625059
Cat: 625060 Rel: 22 Sep 16 • View all Synth modules
 
Mini Mod VCF Transistor Ladder Filter Module
 2 in stock $207.52
Cat: 688824 Rel: 01 Aug 18 • View all Synth modules
 
Analogue waveform animator & dual channel device - black, 14HP
Notes: The WaveSwarm is a waveform animator and all analogue dual channel device.

Each channel simulates up to six VCO's beating in unison with a different beat frequency between each animation. The fixed beat frequencies are generated by twelve onboard LFO's, and the front panel pots control the level of each of the six animators, along with the level of the dry signal to the final mix. In addition to independent channel inputs and outputs it also has an A+B output, which sums the outputs of the two channels, creating an effect similar to twelve VCO's in unison! This is possible because channel B uses slightly different beat frequencies to channel A, they are not identical.

The input waveform can be saw, triangle, sine or wavetable/complex waveforms, in fact most waveforms with the exception of square or PWM waves will give some form of animation.

A soft clip circuit is built in so that at higher signal levels the signal magnitude is limited by rounding the top and bottom of the waveforms, thus slightly softening the sound. There are soft clip LED indicators for both channels.

It can produce huge, fat drones or supersaw type waveforms from a single sawtooth or triangle wave input.
Read more
 2 in stock $268.48
Click for better price!
quote 688824
Cat: 688825 Rel: 01 Aug 18 • View all Synth modules
 
Wave twister/distortion module - black, 10HP
Notes: The V-Shape is two modules in one, a wave twister and a distortion/wavefolding module. Both sections of the module are all analogue in design, and both can be used independently, or they can be normalised together in series, so that a waveform can be twisted first and then distorted and wavefolded.

The wave twister can take (for example) a saw tooth waveform as an input and shape it, under manual or external voltage control, through to being a triangle waveform and on to being a ramp waveform, and produces a sound similar to PWM for sawtooths. It will also work with symmetrical waveforms such as triangle and sine waves, again producing PWM like tones.

It can produce a wave twisting effect from most waveforms (with the exception of square waves), whether they are symmetrical or asymmetric. Under many conditions the transfer function is not perfect, so different harmonics may be generated too. The offset control allows a bias to be added to the incoming waveform, either to bias it correctly around zero or offset it for more distortion and harmonics.

The second part of the V-Shape module is a distortion unit, with selectable Soft or Hard Clipping, and the clipping amount can be varied either by a front panel control or an external control voltage with the "Distort" control. The distortion offset control adds or subtracts a bias voltage to the CV signal, to give an extended range of control. There is also a single stage, switchable wavefolder, which can be used with either soft or hard clipped waveforms.
Read more
 1 in stock $222.49
Click for better price!
quote 688825
Cat: 708087 Rel: 23 Jan 19 • View all Synth modules
 
Sample & Hold, Track & Hold, Gated Slew, Clock & Noise generator - black, 12HP
Notes: A real powerhouse module that takes up only 12 HP of rack space. It can generate random and pseudo random control voltages, staircase waveforms, deliberate aliasing of audio signals, portamento type effects, adjustable audio range noise and has many other uses too.

It can be switched between Sample & Hold or Track & Hold modes, and the unique "Restrict" control affects the way the hold output changes with respect to the current input level and previously held output level. With the control fully off the unit behaves just like any other S/H, but at fully clockwise the output is restricted to move by only a small amount after each new sample. The output will still have the same range as the input, but will need more hold commands to get there. This versatile Sample and Hold circuit was designed by Tony Allgood, and is built under licence from Oakley Sound.

The Sample Hold & Slew module also includes a very well featured Slew generator, which includes a Gated Slew function. It can be used independently or chained with the S&H module. Slew mode can be switched between Linear or Exponential Slew types. There is a Gate input, so that the Slew on/off can be switched using an External CV (Gated Slew), and also the Slew control logic can be reversed by a toggle switch that doubles as a manual Slew on/off switch. In addition, it has slew up only, slew down only or slew up and down modes, which are selected with a three-way toggle switch. An indicator LED lights when Slew is active

There is also an inbuilt analogue Noise generator, which is normalised to the input of the Sample and Hold section, and there are both regular and clipped Noise outputs - the Clipped Noise is particularly useful with the sample and hold section, as it is weighted to produce higher random voltages. Both Noise outputs are fed through an internal "Noise Colour" control - at centre position it allows the noise through unfiltered, turning the control anti-clockwise introduces low pass filtering of the Noise, and rotating it clockwise introduces high pass filtering. The Noise source itself is based on an analogue band gap shunt regulator configured in avalanche mode, and it generates white noise with a gradual roll off above 8kHz. It is a little "grainier" in character than the noise from our MiniMod Glide & Noise module (which uses a reverse biased transistor as a noise source), so is a useful compliment to this module as it does not generate exactly the same sounding Noise

Lastly, it includes a wide range clock generator with a rate LED. The range is from one cycle every thirty seconds to around 2 kHz and the clock output is normalised to the Clock Input of the S&H section. It also has a Clock Out jack so that it can be externally patched to other Eurorack modules.
Dimensions: 12HP wide, 26mm Deep
Current draw: 55mA Positive, 40mA Negative
Read more
 1 in stock $221.42
Click for better price!
quote 708087
Cat: 625058 Rel: 22 Sep 16 • View all Synth modules
 
Mini Mod Vintage Transistor Core VCO Module
 2 in stock $265.27
Click for better price!
quote 625058
Cat: 625079 Rel: 22 Sep 16 • View all Synth modules
 
Ring SM Ring Mod Sub Bass Mixer Module
 1 in stock $260.99
Cat: 637044 Rel: 22 Mar 17 • View all Synth modules
 
Dual LFO with waveshaping, sync input & DC-coupled VCA - dark edition
Notes: This has two LFOs, each with variable waveshape from Saw to Triangle to Ramp waveforms, or variable Pulse width on the Square wave output. LFO 1 has the addition of a low range and a Sync input. The nominal maximum frequency of the LFOs when in Triangle shape is 20Hz, but under certain combinations of settings they will go much higher, well into audio range.

Also included is a DC coupled VCA, the input of the VCA is normalised to the output of LFO 2, so a 0 to +5V input to the VCA CV input gives control of the LFO waveform amplitude. It can also be used as a stand alone VCA.

This module is very useful for controllers such as the Waldorf KB37 where the modulation wheel gives out 0 to +5V, this can be routed to the VCA CV module so the level of the modulation waveform can be easily controlled. This makes it very easy to add VCO vibrato or filter 'wah' with control of modulation amount from the modulation wheel or other controller.
Read more
 1 in stock $223.56
Click for better price!
quote 637044
Cat: 698445 Rel: 09 Aug 18 • View all Synth modules
 
Analogue multi-tap phaser - silver faceplate
Notes: Mega-Phase 12 is an analogue stereo phaser with beefy, very vocal sound. The module is based on the effect pedal Small Stone developed by Electro Harmonix. In contrast to the classic, here you don't have four, but up to twelve stages at hand. The resonance can be picked up from different points in the signal path. Thanks to several inputs and outputs, it is possible to patch a second, external feedback loop with additional effects. Without a doubt the most flexible phaser module on the market.
Read more
 1 in stock $283.46
Cat: 677411 Rel: 05 Feb 18 • View all Synth modules
 
Four-band equaliser, reverb/delay, maximiser & exciter in Eurorack modular format - black faceplate
Notes: Perfect for adding that final touch to a modular patch, the AJHSynth Finaliser R-EQ module includes seven Mono / Stereo reverb types, along with a four band equaliser and a Sonic Maximiser / Enhancer.

The Reverb, EQ and Maximiser can be used in Mono IN, Mono OUT mode or Mono IN, Stereo OUT modes. The reverb alone can also be used in Stereo IN / Stereo OUT mode too.

The fully analogue four band Equaliser includes three parametric equalisers for Low, Low Mid and High Mid ranges, and the High EQ has switchable shelving of either 2kHz or 5kHz. The Low EQ also includes a shelving mode.

The Maximiser is a fully analogue circuit too, with low and high treatment bands which change the phase and amplitude relationships of the sound to add punch and harmonics and really bring the sound to life in the mix.

The Reverb engine is based on 20 year old DSP technology, harking back to the reverb units which were used extensively on many synth and EDM tracks a couple of decades ago. We have added full control of reverb wet / dry mix, either manually or under CV control.
Read more
 2 in stock $298.44
Cat: 708090 Rel: 18 Apr 19 • View all Synth modules
 
Sample & Hold, Track & Hold, Gated Slew, Clock & Noise generator - silver, 12HP
Notes: A real powerhouse module that takes up only 12 HP of rack space. It can generate random and pseudo random control voltages, staircase waveforms, deliberate aliasing of audio signals, portamento type effects, adjustable audio range noise and has many other uses too.

It can be switched between Sample & Hold or Track & Hold modes, and the unique "Restrict" control affects the way the hold output changes with respect to the current input level and previously held output level. With the control fully off the unit behaves just like any other S/H, but at fully clockwise the output is restricted to move by only a small amount after each new sample. The output will still have the same range as the input, but will need more hold commands to get there. This versatile Sample and Hold circuit was designed by Tony Allgood, and is built under licence from Oakley Sound.

The Sample Hold & Slew module also includes a very well featured Slew generator, which includes a Gated Slew function. It can be used independently or chained with the S&H module. Slew mode can be switched between Linear or Exponential Slew types. There is a Gate input, so that the Slew on/off can be switched using an External CV (Gated Slew), and also the Slew control logic can be reversed by a toggle switch that doubles as a manual Slew on/off switch. In addition, it has slew up only, slew down only or slew up and down modes, which are selected with a three-way toggle switch. An indicator LED lights when Slew is active

There is also an inbuilt analogue Noise generator, which is normalised to the input of the Sample and Hold section, and there are both regular and clipped Noise outputs - the Clipped Noise is particularly useful with the sample and hold section, as it is weighted to produce higher random voltages. Both Noise outputs are fed through an internal "Noise Colour" control - at centre position it allows the noise through unfiltered, turning the control anti-clockwise introduces low pass filtering of the Noise, and rotating it clockwise introduces high pass filtering. The Noise source itself is based on an analogue band gap shunt regulator configured in avalanche mode, and it generates white noise with a gradual roll off above 8kHz. It is a little "grainier" in character than the noise from our MiniMod Glide & Noise module (which uses a reverse biased transistor as a noise source), so is a useful compliment to this module as it does not generate exactly the same sounding Noise

Lastly, it includes a wide range clock generator with a rate LED. The range is from one cycle every thirty seconds to around 2 kHz and the clock output is normalised to the Clock Input of the S&H section. It also has a Clock Out jack so that it can be externally patched to other Eurorack modules.
Read more
 1 in stock $208.57
Click for better price!
quote 708090
Cat: 737861 • View all Synth modules
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The WaveSwarm is a waveform animator and all analogue dual channel device.

Each channel simulates up to six VCO's beating in unison with a different beat frequency between each animation. The fixed beat frequencies are generated by twelve onboard LFO's, and the front panel pots control the level of each of the six animators, along with the level of the dry signal to the final mix. In addition to independent channel inputs and outputs it also has an A+B output, which sums the outputs of the two channels, creating an effect similar to twelve VCO's in unison! This is possible because channel B uses slightly different beat frequencies to channel A, they are not identical.

The input waveform can be saw, triangle, sine or wavetable/complex waveforms, in fact most waveforms with the exception of square or PWM waves will give some form of animation.

A soft clip circuit is built in so that at higher signal levels the signal magnitude is limited by rounding the top and bottom of the waveforms, thus slightly softening the sound. There are soft clip LED indicators for both channels.

It can produce huge, fat drones or supersaw type waveforms from a single sawtooth or triangle wave input.
Read more
 1 in stock $240.68
Cat: 625054 Rel: 22 Sep 16 • View all Synth modules
 
Mini Mod Vintage Transistor Core VCO Module
 1 in stock $251.37
Click for better price!
quote 625054
Cat: 625077 Rel: 23 Sep 16 • View all Synth modules
 
AJH synth ring sm ring mod sub bass mixer module
 1 in stock $255.64
Click for better price!
quote 625077
Cat: 637047 Rel: 22 Mar 17 • View all Synth modules
 
Model D-based complex envelope generator - dark edition
Notes: AJH Synth have had quite a few requests for a variant of MiniMod contour generator with Release added to the envelope so that it is full ADSR but still with the characteristics of the Model D - so this is what they have done!

The DH-ADSR is exactly the same circuit as the original Model D envelope and therefore features the same contour shape and retrigger behaviour, but with the addition of a release control. However, they have also added a pulse delay and pulse stretch circuit, along with a re-trigger facility (both of these can be switched out of circuit so that the envelope is a simple ADSR unit).

The addition of pulse stretching and retrigger makes it into an LFO module and it can perform in a similar way to the EMS Synthi A and VCS3 Trapezoid generator, with a variable delay between each trigger and a variable "on" time - however it can also have full ADSR envelope on each retrigger too!

Notable Features:

- PREDELAY - This control determines how long (up to 10 seconds) the start of the envelope is held off, after a gate is received. This ability to delay the onset of the envelope is especially useful when used in conjunction with a standard ADSR: With both envelopes receiving the gate simultaneously complex envelopes can be produced as the DH-ADSR only starts running through its stages after the standard ADSR has completed. Once their outputs are mixed together in a mixer a single evolving envelope with multiple stages is produced!

- Use of the bipolar mixer found in the MINIMOD CV MIX-OFFSET-VCA module can enhance this technique even further, with more precise control over the polarity/offset of the envelope mix possible. Using the VCA of this module could allow for external modulation over either/both of the signals. It goes on...

- HOLD - When in Del-Hold mode (switch down) the HOLD control determines the gate length applied to the envelope, and thus controlling its length/overall shape. When the switch is up, normal ADSR action is produced.

- RETRIG - In this mode the DH-ADSR becomes an LFO, which can mimic the "Trapezoid" function of the vintage EMS designs. HOLD controls the length of the trapezoid shape, and PREDELAY allows for adjustable gaps between each repeat of the shape produced.
Read more
 1 in stock $223.56
Click for better price!
quote 637047
Items 1 to 15 of 15 on page 1 of 1

Filter

Saved Searches
Save current search
Release Date
Featured
Close