Search dance music

Notes: Shortwave

(Lo-fi Radio and Wire Recorder Emulation)

Inspired by espionage devices used during World War II and the Cold War, Shortwave transforms audio into clandestine operations of the past; Russian number stations, mysterious sounds transmitted by radio, and eerie sounds stored on early portable recorders.

Choose between 2 types of noise and interference, and control it with the Exposure parameter. Velocity and Focus control the amount of pitch stabilization. Shortwave will add an interesting emotional response and atmosphere to dry, simple sounds, or destroy a signal like no other fuzz pedal can.

Hand-wired in Seattle, Washington. Shortwave operates on a standard "Boss" style 9vdc power supply, not included. True bypass switching. Includes a limited lifetime warranty, if registered within 30 days of purchase.

Enclosure size: 4.77" x 2.6" x 1.39"

Notes: Psychdelic Vocal Trip

Designed for vocals, the Echo Master is a lo-fi, analogue tape-style delay unit that can transform your voice into a chaotic realm of noise and feedback. The effects loop allows additional effects to be placed in the signal chain, making it easy to use with any of your favourite effects pedals on your vocal sound without any adapters.

The Echo Master is not just a delay unit, however. It utilizes matched Bourns transformers on the input to create a vibrant-sounding and feedback-minimizing preamp to bring you phenomenal vocal quality before you even hit the PA. Your sound engineer will hate you because you'll sound better than ever without their help. Top it off with high-quality Neutrik XLR jacks and the Echo Master is the ultimate tool for taking total control of the sound of your voice.

Controls

Time: Controls the delay time, with numbers labelled in milliseconds. In the Red Zone, the delay chip is pushed to the extreme. The signal decreases in fidelity as the time increases.

F-Back: Controls the number of repeats in the delay circuit, anywhere from one to an infinite to a wall of oscillation.

Mix: Controls the level of the delayed channel in comparison to the dry signal, from fully dry to an equal mix.

Send/Receive: Plug out of the Send jack into any additional effects, then back into the Return jack to introduce new sounds into your vocals. This loop is before the delay line, allowing you to affect your dry vocals as well as the delay generated by the Echo Master.

*Alternate Backplate: Back in stock baby! The Echo Master can also be purchased with a backplate that mounts to your mic stand. Puts the pedal within hands reach to maximize live performance tweak-ability. This recently upgraded V3, comes with a handgrip screw for more torque (although it resembles the V1, this is a much sturdier model). **Please note- cords, microphone, and stand are not included.

Specifications

Dimensions: 6.09" x 3.45" x 2.75" (including hardware).
Weight: 16oz. (w/ Alternate Back Plate 30oz.)
Power: 9V (runs on standard 2.1mm negative center 9V adapter).
Current Draw: 25 mA.

Notes: Pairing an adjustable carrier signal with a revamped distortion circuit, the DOD Gonkulator essentially brings two effects into one chassis with controls for ring, frequency, gain and distortion. Capable of all the weird modulation goodness of the '90s original with the added ability to cover distorted experimental ground, this pedal pushes boundaries and makes statements with modulating effects limited only by imagination. From bell-like clangs to spastic robotic breakdowns, the Gonk demands attention.

General Specifications
INPUT

1 x 14" instrument
OUTPUT

1 x 14" instrument
CHASSIS MATERIAL

All Metal
POWER SUPPLY

9V Alkaline Dry Battery or Optional Power Supply
Dimensions
HEIGHT

2.25" (5.71 cm)
WIDTH

2.63" (6.68 cm)
LENGTH

4.68" (11.88 cm)
WEIGHT

0.62 lbs. (0.281 kg.)

Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analogue/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There's even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current OD-200 system software

Premium Drive Tones with BOSS's Advanced Hybrid Design

The OD-200's next-generation hybrid design seamlessly brings analogue and digital clipping circuits together for the best of all worlds, putting a universe of expressive drive colours under your fingers. Twelve modes offer a variety of premium overdrive, fuzz, and distortion sounds, including a high-gain Brown mode derived from the acclaimed Katana amplifier series. And with the three high-performance "X" drive modes powered by BOSS's cutting-edge MDP tech, you'll experience enhanced definition, clarity, and dynamic response that's perfect for modern playing styles.

Powerful Gain Shaping with Series and Parallel Boosts

While each of the OD-200's 12 main drive modes sound fantastic on their own, you're able to craft tones even further with 15 switchable boost circuits. Placing the boost in series lets you create traditional stacked drive voices, complete with post-gain level to balance with the bypassed sound or kick up the volume for solos. The boost circuit can also be used in parallel with the main mode, enabling side-by-side blending for an unlimited range of unique drive textures.

Kill the Noise and Tighten Your Tone

With its integrated gate circuit, the OD-200 always keeps your signal clear and quiet when you're not playing. The default setting is a great starting point, providing gentle, transparent gating that works well for general playing styles. The decay and threshold controls can also be adjusted for super-fast gate performance when needed, perfect for bringing tightness to heavy modern styles that combine full-throttle gain with precision staccato riffing.

Dial in Sounds Fast

The OD-200 offers a ton of advanced capabilities, but remains as simple to use as any regular distortion stomp. With dedicated controls, you can quickly dial in the gain and overall level for any selected mode, then sculpt the tone with wide-ranging low, mid, and high EQ. There's also a multi-function parameter knob, which changes operation based on the group selected with the panel's parameter switch and LED status indicators.

Save and Recall Your Favourite Setups

The OD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Drive Circuit: Analogue + Digital

Modes:
12 modes
OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ

Memory: 127 + Manual
Nominal Input Level: INPUT: -10 dBu
Maximum Input Level: INPUT: +7 dBu
Input Impedance: INPUT: 1 M ohm
Nominal Output Level: OUTPUT: -10 dBu
Maximum Output Level: OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
Output Impedance: OUTPUT: 1 k ohms
Recommended Load Impedance: OUTPUT: 10 k ohms or greater
Bypass: Buffered bypass

Controls: ON/OFF switch, MEMORY/BOOST switch
MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
PARAM button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: PARAM indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT jack, OUTPUT jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 220 mA

Expected Battery Life Under Continuous Use:
Alkaline: Approx. 6 Hours
* These figures will vary depending on the actual conditions of use.

Accessories:

Leaflet "USING THE UNIT SAFELY"
Leaflet "To obtain the Owner's Manual"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight:

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height: (including rubber foot)65 mm / 2-9/16 inches
Weight: 600 g / 1 lb 6 oz
Weight (including battery): 670 g / 1 lb 8 oz

Notes: For the Fundamental Series, Walrus Audio challenged themselves to design a set of pedals with the tonal integrity that's required to live on a professional's pedalboard, but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has three faders for tweaking the sound and a three-way switch for changing pedal modes. The result is a line of pedals that will keep you covered from your first band practice all the way to a sold-out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK.

Because vast ambient sounds shouldn't just be for larger pedals with vast price points, the Fundamental Ambient brings expansive pillowy reverb to the Fundamental Series with three atmospheric modes in a compact size. The Fundamental Ambient offers a great entry point into ambient exploration with the tonal integrity to live on a professional's pedalboard but with simplified controls friendly enough for even the newest effect pedal users. With Ambient's three reverb algorithms, you can experiment with deep, dark pad-like sounds to AM Radio-like lo-fi sounds with the flip of a switch.

The Fundamental Ambient provides three different atmospheric reverb algorithms to explore beautifully vast and lush soundscapes with plenty of decay time for pillowy soft pad-like decay.

Modes:

Deep - A dark ambient reverb with an added low octave, perfect for creating murky, cavernous sustain or adding a touch of moody atmosphere.
Lush - A breathy, expansive reverb featuring ultra-long sustain. Perfect for generating silky pads and immersive soundscapes with every note.
Haze - A textured, lo-fi reverb featuring distortion, sample rate reduction, and a resonant bandpass tone control, great for vintage or experimental tones.
Decay: Control the amount of reverb decay time. Left is the minimum and right is the maximum amount of time.
Tone: Shapes the overall tonality of the reverb. On Deep and Lush this controls the cutoff of a synth-style lowpass filter. On Haze this controls the width of a resonant bandpass filter, filtering both high and low end at the right, and allowing more high and low to pass through at the left.
Mix: Control the mix of the effect and the original clean signal. All the way to the left outputs only the fully clean signal, and all the way to the right outputs only the affected Reverb signal.
Slide Switch - The slide switch allows you to change between three distinct Reverb algorithms.

Trails Mode - The Fundamental Ambient Reverb comes with trails mode active by default, to disengage trails mode hold down the bypass stomp switch when applying power to the pedal. Once the LED flashes it indicates that trails mode is turned off. To re-engage trails mode, repeat the process, and wait for the LED to turn dark, indicating that trails mode is back on. With trails mode active, your reverb decay will fade off naturally after turning the pedal off. With trails mode inactive, the decay abruptly cuts off when you turn off the pedal.

Notes: A typically unique take on multi-effects from Soma, designed to induce meditative states. Hybrid analogue-digital delay/reverb/granular processing gives a range of creative approaches.

Supplier's Notes:
COSMOS is a drifting memory station designed to work with meditative states through music. The design of the controls, functions and generated soundscapes are intended to evoke, in both performer and listener, states and experiences inherent in meditation, such as limitless space, fluidity, spontaneous development, presence, the ability to hear, tranquility, the experience of subtle harmony and happiness enveloping the whole world.

From a functional point of view, COSMOS is a large array of sound memory, in which recorded sounds undergo constant recombinations, spontaneously generating an ever-changing soundscape. This is achieved in three ways - by a mathematical shift based on the relationships between large prime numbers (the size of all delay lines are different primes), an asynchronous operation of the LFO, and modulation with a slowly changing chaotic signal. As a result, it allows the endless layering and processing of various sounds, as in a looper, but without an intrusive, repetitive loop.

COSMOS generates rich, fluid and evolving soundscapes perfect for ambient music. Using COSMOS, you can play an entire meditative solo concert while being in a spontaneous flow and without using studio-prepared sequences, backing tracks and other things that can't be a reflection of the "here and now".

Specifications

Minimum input voltage: 0.35 V peak-to-peak
Maximum output voltage at line outputs: 11.3 V peak-to-peak
The maximum output voltage at the headphones output: 10.4 V peak-to-peak
Frequency response: 10-22000 Hz
Sound memory: 44.7 sec
Supply voltage: 12 V *
Power connector polarity: centre plus
Current consumption: 0.25 A
Dimensions: 342 x 153 x 68 mm
Weight: 2.2 kg

* Use only the power supply supplied with the device! In case of failure, it can be replaced with a high-quality modern switched-mode power supply with an output voltage of DC 12 volts, the center is plus and an output current of at least 0.5 amperes (more is fine). The power supply must have a wide AC input voltage range of 100-240 volts. Such power supplies have excellent output voltage stabilization required for the device. It is forbidden to use COSMOS with nonstabilized voltage from transformer power supplies. It can lead to damage to the device, which is not covered by the warranty repair!

Notes: Limited-edition Zanzibar blue version of Soma's unique memory station, combining looping effects with real-time performance options, allowing you to craft and perform soundscapes while manipulating live sound.

Supplier's Notes:
COSMOS is a drifting memory station designed to work with meditative states through music. The design of the controls, functions and generated soundscapes are intended to evoke, in both performer and listener, states and experiences inherent in meditation, such as limitless space, fluidity, spontaneous development, presence, the ability to hear, tranquility, the experience of subtle harmony and happiness enveloping the whole world.

From a functional point of view, COSMOS is a large array of sound memory, in which recorded sounds undergo constant recombinations, spontaneously generating an ever-changing soundscape. This is achieved in three ways - by a mathematical shift based on the relationships between large prime numbers (the size of all delay lines are different primes), an asynchronous operation of the LFO, and modulation with a slowly changing chaotic signal. As a result, it allows the endless layering and processing of various sounds, as in a looper, but without an intrusive, repetitive loop.

COSMOS generates rich, fluid and evolving soundscapes perfect for ambient music. Using COSMOS, you can play an entire meditative solo concert while being in a spontaneous flow and without using studio-prepared sequences, backing tracks and other things that can't be a reflection of the "here and now".

Specifications

Minimum input voltage: 0.35 V peak-to-peak
Maximum output voltage at line outputs: 11.3 V peak-to-peak
The maximum output voltage at the headphones output: 10.4 V peak-to-peak
Frequency response: 10-22000 Hz
Sound memory: 44.7 sec
Supply voltage: 12 V *
Power connector polarity: centre plus
Current consumption: 0.25 A
Dimensions: 342 x 153 x 68 mm
Weight: 2.2 kg

* Use only the power supply supplied with the device! In case of failure, it can be replaced with a high-quality modern switched-mode power supply with an output voltage of DC 12 volts, the center is plus and an output current of at least 0.5 amperes (more is fine). The power supply must have a wide AC input voltage range of 100-240 volts. Such power supplies have excellent output voltage stabilization required for the device. It is forbidden to use COSMOS with nonstabilized voltage from transformer power supplies. It can lead to damage to the device, which is not covered by the warranty repair!

Notes: For Eons, man has thought the sound of thunder to be from the heavens above, echoing boastfully over us as we stay safe from its greatness. However, legend tells of a stoic and indomitable beast residing in the highest mountains seen and heard only by the most brash of travelers. With gnarled and twisted horns, this creature emits a sound thicker than Earth's crust to command attention and warn all who stand in his way. This is Eons.

Eons is a five-state fuzz capable of massively thick sounds ready to test the limits of any amp's grill cloth. Use the Voltage (lightning bolt) knob to crank up to 18 volts into the pedal's circuit for massive, open fuzz sounds, or choose to starve it down to 3 volts for spatty, gated fuzz. Experiment with the Voltage and Mode knobs for nearly endless styles of fuzz tones. Find vintage-inspired sounds emanating from the stages of Woodstock to chaotic three-chord punk rock. Eons is ready for a fight.

The Eons features a five-position rotary knob that offers the following clipping configurations. Think of them as different "flavors" of the pedal:
I. Silicon soft clipping traditional fuzz that's well rounded with a huge sound; compressed and smooth.
II. Silicon clipping with an added bass boost that boosts the low end at the beginning of the circuit; compressed and crunchy.III. Germanium soft clipping with a feel of "what if a distortion and fuzz had a kid?"; crunchy and dynamic.
IV. LED clipping diodes with a slight high-end cut; dynamically dark.
V. Hard clipping silicon transistors combined with LED and Silicon soft clipping diodes. The rowdiest of the modes with tons of gain: compressed, loud, and angry.

Specs

The Eons comes in a sandy tan enclosure color with red, cream and black ink. Artwork features a stoic four horned, Markhor goat illustrated by Adam Forster.
9V DC, center negative, 100mA min
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended. Power supply not included.

Notes: Amazingly versatile phaser business in this brilliantly designed pedal. Watch the demo video to hear the amazing range of sounds this one can do. Best phaser ever? Might just be.

Supplier's Notes:

Jump into spaceship Horizont and begin your trek into star- filled galaxies, all while discovering the incredible vastness of the sounds created by this inter-dimensional multi-spatial stereo analog JFET Phaser. The unexpected is waiting for you behind the far away horizon and it will be a journey you'll never forget!

The Horizont's mission is to push way beyond the classic phasing sounds of yesteryear, and take you to uncharted phaser worlds the second you plug in. By combining lush analog JFET phasing with digitally controlled dynamics, Horizont creates a vivid and expressive modulation experience, all while providing experimental and creative features that'll kick phasing well into the 21st century.

Besides the more common phaser controls, the Horizont offers a plethora of new and exciting options for all the interstellar tone chasers out there. To greatly broaden the range of phasing tones available, KMA implemented a digital LFO with no less than eight different waveforms: Ramp Up/Down, Sine/Triangle/Square wave, a sweeping waveform, Sample & Hold and a random slope waveform going from 20s down to 40ms.

The implemented envelope generator is one of Horizont's absolute key features. It transforms your input signal into a control source to modulate the speed of the digitally controlled LFO or lets you manually phase for a resonant touch wah- like sound, depending on the state of the SWP- and SPURTCONTROL-Switch.

Set the SPURTCONTROL switch to LFO to let the SPURT knob adjust the internal phasing speed. However, by flicking the switch to ENV (Envelope) mode, it allows you to dynamically modulate the speed along the full LFO speed range, based on how loud the input source is (e.g. when you attack the strings hard). You can also combine the SPURT knob and the envelope by flicking the toggle to LFO+ENV where SPURT then sets the minimum speed. For even more control, you can even plug in an external expression pedal/CV-source (0-5V) to alter the minimum speed on-the-fly or you can use the TAP TEMPO switch (tap just twice) to set the speed to fit in with the tempo of your music.

The EXP-Mode switch also lets you choose between a manual phasing mode, controlled by an expression-pedal or an external CV source. Setting the EXP-Mode switch to the middle position will disable any external expression control.
The SWP (Sweep) switch lets you decide to use either the LFO or the envelope of your instrument signal to control the phasing.

The envelope can be set to upwards or downwards operation via the ENV switch, seeing the LFO either slowing down or speeding up, or flipping the orientation when phasing manually from lows to highs and vice versa. In conjunction with the FUEL (Sensitivity) and the DECAY controls, the envelope can be tailored perfectly to your needs.

The EMPH (Emphasis) mode from the original Astrospurt Phaser was kept, but have reworked and refined it extensively for the Horizont. The four toggle-switches determine the stage in which the phase-shifted signal is fed back into itself, while the REG (Regeneration) control sets the feedback amount. We also smoothed out the overall sound of the EMPH mode for a more pronounced, and crisp vocal-like tone. Each of the different switch variations and turn of the REG control will yield different results, seeing you discover new wild, fuzzy and noisy galaxies as you travel deeper down this sonic wormhole.

In order for you to levitate through spacetime, a stereo output has been added to the Horizont. You can switch between a standard stereo output or a panning output, via the STEREOPAN switch. Synchronized with the LFO speed, the upper cycle of the LFO sends the signal to the OUT1 and the bottom cycle to the OUT2. This is without a shadow of a doubt the most liquid and astonishing phasing experience you'll ever embark upon. But wait, there's more! Stop and take a deep breath, set the MIX control to fully clean and the Horizont is transformed into a Tremolo on-the-spot, with all the other aforementioned features.

Last but by no means least, the Horizont was equipped with an FX-Loop right in front of the phase-shifting line. This enables you to add your own secret sonic weapons to this spaceship, seeing you create your very own unique phasing sounds.The pedals' headroom was also increased drastically by boosting the internal circuit voltage to 18V, from the regular 9V input, to give the cleanest phasing possible no matter what instrument or line source you use.

Notes: The BeatBuddy is a drum machine in a stompbox, or a drummer pedal for short. Use this drum pedal for guitar and many other instruments. Further, we've meticulously recorded professional drummers and paired their samples with an algorithm that results in the best sounding drum machine you've ever heard.

In addition to being the most realistic drum machine on the market, it's also the easiest guitar drum pedal to use. That is to say, there's no fussing around with sequencers, and controlling the beat during a live performance is as easy as stomping on the pedal to add fills, transitions, and outros.

Notes: This is a digital effects pedal in a compact format, including reverse delay - pitch shifter - delay and modulated reverb.

Effects engine is 12 bit and includes analogue filtering before and after digital conversion, based on vintage eighties units' topologies, but it allows for all the effects to be simultaneously available.

Despite its complexity, operation is simple and intuitive, all functions are directly controlled by the corresponding knob.

Pots controls:

1-Blend controls mix of effects over final output signal
2-Octave blend mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component 5-Balance controls mixture from reverb and
delay.
6-Sample rate controls the frequency operation for the whole pedal, modifying delay time
and reverb decay.
7-Reverse blends the reverse component with the direct signal.

Indicators:

Signal: indicates clipping, the input path has compression and limiting so it gives an idea of how hard you are driving the pedal.

Tap: blinks at the rate of the delay, depending on tap and sample rate.

Tap/freeze: turns red while tapping time, blue indicates reverb freeze.

Bypass: global effect on/off

Footswitches:

1-Tap/ freeze works as a tap tempo for the delay and reverse delay, and freeze/infinite for reverb, selected by the associated toggle switch. Max delay time is around 6 seconds, depending on sample rate setting.

2-Bypass: buffered bypass for the whole pedal.

Power consumption: 150 milliamps.

Notes: Expanded Freeze in a lowball-sized package!

Meeting between the original Freeze and Superego pedals is the Pico Deep Freeze Sound Retainer. With the ability to freeze a moment in sound, the Deep Freeze can act as a sustain pedal for holding chords and notes as backing for your playing or as a platform to manipulate your tone into new sounds impossible with a normal guitar. In addition to the original Freeze's abilities, the Deep Freeze features layering, adjustable attack/decay speeds, glissando, dedicated volume controls, and 3 modes: Latch, Moment, and Auto, making it powerful pedal punching well above its weight.

The Deep Freeze allows for instant sound freezing in three modes of operation. Latch freezes sound each time the footswitch is pressed until the effect is bypassed, while Moment mode freezes sound only while the footswitch is held down. Auto mode captured sound automatically each time it senses signal above its threshold for virtually foot-free freezes. These three modes make it easy to operate the Deep Freeze in a way that fits any playing style.

Controls on the Deep Freeze let you further tailor the operation of the effect. Separate DRY and EFFECT volume controls let you blend signals from subtle backing to 100% effect experimentation. GLISS adjusts the morph time between freeze sounds creating otherworldly soundscapes. The SPEED/LAYER knob adjusts either the attack/decay time of the effect in Moment and Auto modes, or the amount of layering possible in Latch mode which makes playing impossible chords possible!

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: Seductive swells and reverse tape effects push the envelope on any pedalboard!

The original Attack Decay Tape Reverse Simulator is known for producing volume and reverse swells, backward tape sounds, artificially short staccato notes, and bowed instrument effects. In 2019 the digital Attack Decay reissue was released, and now the Pico Attack Decay gives us volume envelope effects in a simplified, compact package.

The Pico Attack Decay allows you to dial in volume swells and decays, both in Mono mode-one volume envelope for all notes you play-and the revolutionary Poly mode where each note to has its own volume envelope creating cascading swell effects and leads with agile attack smoothing. With intuitive functionality and simple controls, the Pico Attack Decay opens up creative avenues for any player interested in pushing the (volume) envelope.

The Pico Attack Decay is both powerful and simple with four knobs and a mode button that let you create a wide variety of effects. The ATTACK knob sets the swell or fade-in speed of the volume envelope while the DECAY knob sets the fade-out speed of the volume envelope. Set the ATTACK higher for languid volume swells. Set the DECAY higher for artificially staccato notes for synth-like punches. SENS adjusts the threshold for triggering the envelope. VOL controls the overall output volume. A hidden BLEND control allows you to blend wet and dry signals for even more flexibility in tone.

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: Morph across the spacetime spectrum.

Years in the making and the first of its kind, Cosmosis is a stereo, high-fidelity ambient reverb that allows musicians to tailor three original spaces-Theatre, Temple, and Cosmos-as well as manipulate them in real time. In addition to controls for the size of the reverb, wet/dry blend, and filtering, Cosmosis features a unique Morph function that allows musicians to alter their reverb settings in real-time by pressing the left footswitch. The three space algorithms found inside of Cosmosis are all-original and truly unique. Theatre puts the player in a variable room that ranges from cozy to highly reflective using multiple parallel short reverberators. Temple occupies a dramatic, large indoor space by implementing numerous long reflections in both parallel and series. And Cosmos creates an enormous spectrum of heavenly reverb derived from the harmonic content it's fed. The Morph feature found in Cosmosis provides a simple way for players to trigger a gradual change to various reverb parameters over a specified amount of time set by the accompanying Morph Rate knob. Players can set both "red" and "green" values on their Tone, Blend, and Size knobs, then engage the Morph footswitch to oscillate between the two reverbs at their desired rate. Any combination of knobs can be assigned to morph. Create elegant morphs for subtle movement or sweeping, cinematic morphs for dramatic sound design effects. Save up to four custom reverb presets, including morphing. Cosmosis runs on standard 9VDC power.

Knob-by-knob

Size: Sets the size of the reverb space.

Blend: Sets the balance between wet (reverb) and dry (clean signal)

Tone: Clockwise from noon, this control applies a high-pass filter, making the reverb sound brighter. Counter-clockwise from noon, this control applies a low-pass filter, making the reverb sound darker.

Morph Rate: Sets the time it takes for parameters to change between "red" and "green" values when the Morph footswitch is engaged.

Morph: Enable morphing for any combination of the 4 on-board knobs. Push to toggle through knobs, press and hold to select. Press and hold again to deselect.

Preset Select: Push to toggle through 4 pre-loaded presets, press and hold to select. To save a custom preset after making changes, press and hold. Presets can also be toggled and selected using only footswitches (see manual).

Space Select: Push to toggle through 3 available reverb spaces.

Three evocative spaces

The three unique space algorithms found inside of Cosmosis are entirely original and comprise a combination of primary source impulse responses, imagined reflections, and inspired mathematics. Theatre is a vintage-inspired small room sound ranging from cozy to reflective; Temple is a rich and flowing larger space featuring long reflections in both parallel and series; and Cosmos makes use of divine inspiration to create an enormous spectrum of harmonically-informed reverb. Kill the Size knob in any space to conjure a ghostly, full-wet "reverse" reverb effect.

Enter the world of cosmosis

A portal of such divine proportions was always missing in the Pigtronix universe. One day, traveling further than ever before into the outermost reaches of what he knew to be true, Marvin caught glimpses of refracted light and mist hovering in the atmosphere of a new, far-distant planet. This was the long-sought Cosmosis-a planet that takes in the sounds of the galaxy, sublimates them, and ushers them to the other side forever changed.

Model Cosmosis

Model name: Cosmosis
SKU: COS
Function: Stereo Ambient Reverb with Morphing
Category 1: Reverb
Expression: TRS Remote
Bypass: Buffered

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: High
Output impedance: 1k
Body

Length (in): 3.25
Width (in): 4.5
Height (in): 2.2
Weight (lbs): 1

Notes: Immerse yourself and go beyond the boundaries of what is possible with a conventional guitar or synth pedal. GHOST PEDAL brings you new possibilities of tone shaping with its state of the art flexible audio routing chain, allowing you to jump between dimensions with a single press of a button.

From earth shaking subharmonics and distorted drones to angelic shimmer reverbs and anything in between, GHOST is a PEDAL for the adventurous sound designers and the most demanding guitar and synth players. Intuitive UI coupled with hands-on control and preset storage allows you to stay in the now and focus on your performance.

Unique user interface showing parameter values and real-time modulations

Line or high-impedance JFET guitar inputs with cabinet simulator

Full MIDI control over every parameter incl. MIDI clock over LFO and delay

True relay stereo, buffered and trails bypass modes

Bipolar LFO and expression pedal assignments to any parameter

3 reverb and 3 filter types, incl. comb with resonator, six possible routing variations

Reverb freeze, delay looper, spring reverb with virtual spring excite

Three footswitches let you change assignable parameters (tap tempo/freeze/spring excite), select presets and bypass with your feet

Notes: The EHX Ring Thing ring modulator presents state of the art modulation control allowing the user to explore a new sonic world that is both familiar and inventive. Complex modulations with interactive parameters create any sound your mind can imagine. Articulate pitch shifting, preset tuning, selectable waveforms and external control delivers sound designer mystery, with a Rock and Roll edge.

Multi-wave selection for modulation and Ring Mod
Low pass Filter for Ring Mod and single side band modes
Fine and depth control for frequency select and amount
Tune switch to adjust frequency to your pitch
Upper and lower sideband isolation
High quality whammy style effects with expression pedal
Pitch shifting with pitch modulation and vibrato
Fully programmable
Power adapter included

Specifications:
Circuit: Digital
Bypass: Buffered Bypass
Audio: Stereo
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 190mA
Year Released: 2010

Notes: MOOER, a leading music gear company, is proud to announce the release of Micro Looper II, a powerful and compact loop pedal that provides an impressive 480 minutes of recording time spread across three saving banks.

Featuring three saving banks and 16 slots per bank, the Multi-Saving-Slot Micro Looper Pedal offers users up to 480 minutes of recording time, with each slot providing up to 10 minutes. The pedal also includes unlimited recording layers, allowing musicians to easily create complex and layered loops.

With its AUTO REC function, the Micro Looper II automatically starts recording as soon as an input signal is detected, making it easy to capture spontaneous musical ideas without having to press any buttons.

Specifications:

Number of saving slots: 48
Maximum recording capacity of each slot:10 minutes
Sample rate/sample depth: 44.1kHz/24bit
Input: 1/4'' mono audio jack (impedance value: 470k ohm)
Output: 1/4'' mono audio jack (impedance value: 100 ohm)
Power requirements: 9V 120mA, centre negative (it is recommended to use the isolated power supply to avoid unexpected noise)
Dimensions: 93.5(D) × 42 (W) × 52mm (H)
Weight: 157g
Accessories: Owner's manual

Notes: Lo-fi looks, killer sound. Serious filth here from Death By Audio. Surprising versatility with simple controls, offering mild overdrive if you want but specialising in grimy fuzz.

Supplier's Notes:
Call in the Army, the Navy, Scotland Yard, your mom, and the Mario Brothers! You'll need all the help you can get to stop this endless wall of fuzz from raging! This kill-all circuit explodes the meanest, nastiest, most insane distortion to make you the ruler of the fuzz universe.

This Death By Audio pedal has hand spray-painted graphics covering up meaty components and sound, giving you a high-tech fuzz mutilator at a punk rock price. With three knobs it can create a multitude of ultimate fuzz, boost, overdrive, and distortion sounds. Listen for yourself and you will see, this is the thickest-sounding sustaining fuzz pedal we have ever heard.

Controls

Volume: Controls the overall output level.

Fuzz: Controls the gain of the fuzz circuit. At its lowest setting the pedal just acts as a tone shifter. As the fuzz knob is turned up it sweeps from a booster to an overdrive to a thick distortion to a full on blown out war of fuzz.

Tone: A specially designed multi-curve shaping filter which changes the timbre of the pedal from super deep bass sludge to screaming highs.

Specs

Dimensions: 5.87" x 4.72" x 2.5" (including hardware)
Weight: 18 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery)
Current Draw: 1 mA

Notes: Zoar is a highly interactive medium-high gain discrete distortion (using only transistors; no opamps or diodes in here!) that has that highly sought after touch sensitive amp-like quality.

It has been finely tuned to create a highly tweakable hi-fi and modern sounding distortion, but with the ghosts of old school circuitry to deliver a grind that is both instantly familiar and delightfully unique.

From defined sparkle and tightness of an overdrive to low-medium gain fuzz that's perfect for drop tuned guitars and basses, Zoar can do it all. Zoar lets you dial in and control every nuance of your tone from jangly on-the-verge of break up to blowing the walls out heavy saturation.

While having its roots in a very familiar past, the passive 3-band EQ has been finely tuned for modern tones. While this style of tone shaping seems simple on the surface, it is deceptively complex and highly interactive - yet surprisingly easy to instantly dial in dozens of mind blowing sounds.

Want to elevate your sonic spirit to a higher level? Try running Zoar at higher voltage! Zoar can handle power up to 18v DC. Higher voltages will yield a different frequency response with more defined dynamics and a faster response. When powered at 18v, the range of clean tones are widened, dirty tones become punchier with better note articulation, low frequencies are tightened, higher frequencies will cover a broader spectrum without becoming harsh and the output volume nearly doubles! The experience is not unlike plugging into a wall of high wattage tube amplifiers!

This meticulously crafted box has six knobs that allow you to truly customize your sound with the Level, Weight, Gain, Bass, Middle, and Treble controls.

The Gain control on Zoar goes from the edge of break up all the way over the cliff into the crunchy, grinding abyss. The character of the distortion is heavily dependent on the setting of the Weight control as well as the pickup type and further fine-tuned by the EQ section.

Zoar's 3-Band EQ and Gain controls give you nearly unlimited options with great focus and sensitive precision, but the real powerhouse of Zoar is the Weight control. This control dictates the amount of low end that is passed into the circuit, thus controlling the entire character of the pedal. Simply dial in the 3-Band EQ to 12 o'clock and adjust the Weight to see how drastically it dictates your sound. From a mere clean boost to a high gain distortion to overdrive to the crispy Hi-Fi fuzz territory, this function gives you everything.

The Level control hits unity around noon, but this is dependent on where the other controls are set. In addition to controlling the output volume, it also plays a small part in controlling the voice of Zoar. By adjusting the Level control with any combination of EQ (boosting the frequency bands and cutting the output volume), you can achieve drastically different curves that have the feel of the more traditional low pass filter type tone control.

Notes: Music's best octave pedal in a powerhouse pico package!

EHX's smallest and most powerful compact Polyphonic Octave Generator yet. The Pico POG takes the streamlined simplicity of the Micro and Nano POGs and fits it all into an ultra-compact chassis and adds a powerful tone control. The tightest octave effect now fits on the tightest of pedalboards.

The EHX Pico POG features a lighting fast feel that will track every note and chord you play with precision. Dial in Sub Octave to add stumble rumble or monstrous thunder. Add Octave Up for ethereal air or max it out to shred into another galaxy. Perfectly blend 3-voice tones for fat synthy madness. The 3 mode Tone control lets you tailor your sound to fit into any pocket no matter how massive or small.

Controls on the Pico POG include dedicated volumes knobs for the SUB OCTAVE, OCTAVE UP, and DRY voices. These three controls act as a mixer for infinite possible voice mixes. The TONE knob features three modes controlled by the FILTER button. In Tone Mode, the knob acts as a tilt-EQ with a flat frequency response in the center, more treble and less bass as you turn the knob clockwise, and less treble and more bass as you turn the knob counterclockwise. In this mode, the EQ is applied to all 3 voices. In Low Pass Filter mode, the knob cuts highs in the Sub and Octave Up voices, while High Pass Filter mode cuts lows in the Sub and Octave Up Voices.

Lightning-fast tracking with perfectly precise octave tones

3 volume knobs control level of SUB OCTAVE, OCTAVE UP, and DRY tones

TONE knob with 3 filter modes

Tone Mode applied tilt-EQ to all output

Low Pass Mode applies a resonant low pass filter, which allows low frequencies to pass while cutting higher frequencies of the Sub and Octave Up voices

High Pass Mode applies a high pass filter, which allows high frequencies to pass while cutting lower frequencies of the Sub and Octave Up voices

Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: A 5-band graphic equalizer pedal for powerful and accurate tone shaping of clean or distorted guitar tones. This unit shines when used for pre-gain mid boosting to give a more focussed overdrive or post-gain scooping to sit heavy riffs back in the mix. Clean signals can benefit from cutting harsh frequencies or as a tone-dependent lead boost.

5 frequency + 1 master volume sliders
9V battery or optional DC adapter operation
Power supply: 9V battery (PP3 included) or optional DC adapter
Construction: Aluminium housing with rubber base
EQ controls: 100Hz, 300Hz, 1kHz, 3kHz, 5kHz, Volume
Dimensions: 115 x 68 x 47mm
Weight: 279g

In the box

The box for this item contains :

EQ-50 guitar EQ pedal
PP3 battery

Notes: BOSS's iconic DD-3 Digital Delay has been a pedalboard staple since 1986, loved everywhere for its great sound and simple operation. With the DD-3T, we've updated the classic stomp with enhanced functionality while fully retaining the original's sound and control layout. It's now possible to tap in delay tempos using the onboard switch or an external one, with your choice of three beat subdivisions. And the direct output jack has been moved next to the main output, providing easier connectivity for wet/dry setups.

In continuous production for over three decades, the DD-3 has been the go-to delay stomp for countless players. Based on the DD-2-the world's first digital delay pedal from 1983-the DD-3 is revered for its warm, round delay tone and simple controls that let you dial in sounds fast. The DD-3T's sound circuitry and controls are identical to the DD-3, delivering every drop of that classic vibe you know and love.

A key addition the DD-3T brings is tap tempo, an essential feature for creating the rhythmic delay effects at the heart of many guitar styles. In delay mode, hold the pedal switch for two seconds to toggle between bypass and tap operation. And for on-demand tap control, simply connect an external footswitch. When the DD-3T receives tap input, up to 800 ms of delay time is available, and the Mode knob sets the tap subdivision (quarter-note triplet, dotted-eighth note, or quarter note).

The DD-3T features a direct output jack like the DD-3, but it's been moved next to the main output jack to make connections easier. Plugging a cable into the direct out converts the main out to delay only, allowing you to send wet and dry signals to different amps for wide, immersive sounds. And if your amp or switcher has a parallel effects loop, just connect a dummy plug to the direct out to mute the dry sound for effect-only blending.

The original DD-3 (and DD-2 before) included a forward-thinking Hold function, which allowed you to capture a sound up to 800 ms long, play it continuously, and jam over the top. Many years later, BOSS further developed this creative concept with the successful Loop Station products, which helped spawn the new musical style of live looping. The DD-3T includes the same Hold function as the DD-3, but it's been renamed "Short Loop" to reflect today's common usage.

Specifications

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls: MODE knob, TIME knob, FEEDBACK knob, E.LEVEL(Effect Level) knob, Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)

Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DIRECT OUT jack: 1/4-inch phone type
TEMPO jack: 1/4-inch phone type
DC IN jack

Power Supply: Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 70 mA

Expected battery life under continuous use: Alkaline: Approx. 5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")

Alkaline battery (9 V, 6LR61)

Options (sold separately)
AC adaptor: PSA series
Footswitch: FS-5U, FS-6, FS-7

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 420 g / 15 oz

Notes: Introducing the DD-8, the most wide-ranging and feature-rich BOSS compact series delay ever. This loaded pedal delivers more of everything-more great sounds, more delay time, more control options, and more connectivity. And it does it all in a standard BOSS pedal that slides easily into any mono or stereo setup. Eleven modes provide delay colours from basic to exotic, plus a looper with unlimited overdub capability and external control support. For maximum versatility in a minimum amount of space, there's no better delay stomp than the DD-8.

Equipped with a diverse selection of delays, the DD-8 packs impressive sonic range into one small pedal. Clean digital delays, vintage analogue and tape types, and modulation echo are available, plus specialty delays like shimmer and reverse. There's a new Warm type for softer echo tones, and a +RV type that blends delay and reverb together. Warp is perfect for dynamic ambient textures, while the new GLT type is great for glitchy rhythmic effects.

Everything sounds bigger and better in stereo, and the DD-8 delivers with full stereo I/O support and your choice of three output modes. The default independent mode provides linked parallel delays on the left and right channels, allowing you to maintain the true balance of stereo input sources in the effect sound. There's also a panning mode for ping-pong delay effects, and a wide stereo mode for enhanced spatial depth.

The DD-8's extensive real-time delay options help bring your music to life. You can tap in tempos with the onboard pedal switch, and control the Warp and GLT modes for unique expressive effects. Adding one or two footswitches unlocks more creative possibilities, like on-demand tap tempo, extended looper control, and a cool Twist effect for soaring echo sounds. Alternately, an expression pedal can be used for continuous control of level, feedback, or delay time-or all of them at once.

Having a looper on your pedalboard is a handy thing-it's great for practice, checking sounds at gigs, and creating on-the-fly backing while performing. The DD-8's looper mode has you covered, so you don't have to take up precious space with a dedicated pedal. All looper functions can be controlled with the onboard switch, providing all-in-one operation. But if you prefer to work with extended controls, just connect one or two footswitches to operate the looper's stop and clear functions externally.

The DD-8's inputs and outputs have smart functionality, allowing you to set the pedal for any application simply by connecting cables in different ways. A variety of mono and stereo connections are supported, including discrete dry and effect outputs for wet/dry setups. It's even possible to defeat the dry signal entirely, perfect for delay-only blending in a parallel effects loop.

Analog-Classic analogue BBD delay sound.
Standard-Clear digital delay.
Tape-Vintage tape-based delay sound.
Warm-Digital delay with a softer sound.
Reverse-Backwards delay for cool psychedelic effects and other unique tones.
+RV-Digital delay with reverb added.
Shimmer-Pitch-shifted delay for lush, shimmering textures.
Mod-Digital delay with modulation added on the repeats.
Warp-Unique delay with expressive pedal control. Holding the pedal switch increases feedback and level, allowing you to create ambient swell effects.
GLT-Newly developed delay mode that creates glitchy machine-gun effects when the pedal switch is pressed. Adjust the Feedback and Time knobs for a wide variety of sounds.
Loop-Loop recorder with overdub capability and up to 40 seconds of recording time with mono input (20 seconds with stereo input).

Specifications

Nominal Input Level: -20 dBu
Input Impedance1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls: MODE knob, TIME knob, FEEDBACK knob, E.LEVEL(Effect Level) knob, CARRYOVER switch
Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)

Connectors: INPUT-A(MONO)/INPUT-B jack: 1/4-inch phone type
OUTPUT-A(MONO)/OUTPUT-B jack: 1/4-inch phone type
TEMPO/EXP jack: TRS 1/4-inch phone type
DC IN jack

Power Supply:
Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)

Current Draw: 100 mA

Expected battery life under continuous use
Alkaline: Approx. 3.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (9 V, 6LR61)
Options (sold separately)
AC adaptor: PSA series
Footswitch: FS-5U, FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5

Size & weight
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 440 g / 1 lb

Notes: Introduced in 1974 and produced for over 14 years, the Roland RE-201 Space Echo stands among the most legendary and sought-after effect units in music history. Known for its distinctive rhythmic echo sounds, warm character, and highly playable sonic quirks, this tape-based classic continues to inspire musicians, producers, and audio mixers over four decades on.

With the RE-2, the authentic sound and behaviour of the Space Echo is now available in the famous BOSS compact series for the first time. Backed by intensive R&D and our latest innovations, the RE-2 delivers the coveted magic of the RE-201 in a pedalboard-friendly footprint-realized in flawless detail by the company that designed the original.

When tape-based echoes were standard in the music world, the RE-201 was a leader in its class. Equipped with three evenly spaced tape heads and a spring reverb tank, it could produce everything from clean, single delays to dense, rhythmic echoes and ambient washes. The RE-201's appealing sound was influenced by many factors, from the warm compression of magnetic tape saturation to the evolving modulation produced by motor speed fluctuations, friction, and other elements. Last but not least, analogue preamp circuitry was a key ingredient in the Space Echo's rich sonic recipe.

In developing the RE-2 and its big brother, the RE-202, BOSS engineers have fully reproduced all the complex, non-linear behaviours that contribute to the RE-201's immortal character. We carefully analysed several vintage RE-201s, including a pristine original unit from the BOSS and Roland factory archive. Everything that influences the sound has been recreated with all-new algorithms, including the tape path, record/playback mechanism, motor variations, preamp coloration, spring reverb character, and more.

The RE-2 squeezes the complete sonic character of the RE-201 into the classic BOSS compact pedal format. The 11-position mode selector lets you dial in different virtual tape heads with or without spring reverb, and you can balance the echo/reverb blend with independent level knobs. Every behaviour is accurately replicated, such as the gradual pitch change that occurs with Repeat Rate tweaks and the runaway feedback that happens when maxing the Intensity knob. And with the expressive Wow & Flutter control, you can conjure all the natural modulation characteristics that are essential to the Space Echo sound.

The RE-2 takes the Space Echo experience further with versatile features for today's music. Delay time has been doubled and tap tempo control is supported, and there's a cool Twist function for creating evocative special effects as you perform. For the dry sound, you can choose between the warm and fat RE-201 preamp tone or a clean signal with zero processing. Full stereo I/O is available, and it's possible to mute the dry signal for parallel effect setups and studio use. The RE-2 also supports expanded control via external footswitches or an expression pedal, including continuous pedal control of multiple panel functions at once.

Specifications

Modes: 11 modes
Nominal Input Level: INPUT A(MONO), INPUT B: -20 dBu
Maximum Input Level: INPUT A(MONO), INPUT B: +7 dBu
Input Impedance: INPUT A(MONO), INPUT B: 1 M ohm
Nominal Output Level: OUTPUT A(MONO), OUTPUT B: -20 dBu
Maximum Output Level: OUTPUT A(MONO), OUTPUT B: +7 dBu
Output Impedance: OUTPUT A(MONO), OUTPUT B: 1 k ohm
Recommended Load Impedance: OUTPUT A(MONO), OUTPUT B: 10 k ohms or greater
Bypass: Buffered bypass

Controls: MODE knob, REPEAT RATE knob, WOW & FLUTTER knob, INTENSITY knob, TONE knob, ECHO knob, REVERB knob, CARRYOVER switch
Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)

Connectors: INPUT A(MONO) jack, INTPUT B jack, OUTPUT A(MONO) jack, OUTPUT B jack: 1/4-inch phone type
CTL/EXP jack: 1/4-inch TRS phone type
DC IN jack
Power Supply: Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
Current Draw: 75 mA

Expected battery life under continuous use: Alkaline: Approx. 4.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (9 V, 6LR61)
Options (sold separately)AC adaptor: PSA series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: (including battery)450 g / 1 lb

Notes: Part of the new Boss 200 series, the RV-200 is a seriously classy reverb. With a choice of 12 algorithms, things quickly move from classic ambience to the pitch-shifted arpeggiated madness of the new Arpverb program.

Supplier's Notes:
Ambient Bliss

The RV-200 delivers inspiring reverbs and premium sound in the streamlined BOSS 200 series design. Twelve versatile reverb types-including the newly developed Arpverb-provide everything from subtle spatial colour to complex, dreamy textures for ambient explorations. Quickly dial in sounds with the fast-access interface. Save favourites in 127 memories. And take performances to the next level with flexible onboard footswitches, deep external control support, and head-turning creative tools like Warp, Twist, and more.

Studio-Grade Processing

The RV-200 features a powerful reverberation engine with class-leading sound quality, backed by custom BOSS DSP, 32-bit AD/DA, 32-bit floating point processing, and a 96 kHz sampling rate. Every algorithm offers true studio-grade performance, with exceptional detail and definition from the shortest early reflections to long, floating tails spanning multiple seconds.

Twelve Distinctive Reverbs

From essentials like Room and Hall to deeply immersive reverbs like Shimmer, Slowverb, and the cool new Arpverb, the RV-200 gives you the ambient colours you need for every song and style.

Room

Simulates the reverberation characteristics of a small room. Select from four room sizes with the Param knob.

Hall

Simulates the reverberation characteristics of a concert hall. Select from three hall sizes with the Param knob.

Plate

Simulates the reverberation characteristics of a studio plate reverb. Balance the high and low damping of the reverb with the Param knob.

Spring

Simulates the distinctive sound of the hardware spring reverb effect found in guitar amplifiers. Select the number of springs with the Param knob.

Shimmer

Creates long, dreamlike reverberations rich in harmonic content. Adjust the harmonic character and diffusion with the Param knob.

Arpverb

A newly developed BOSS reverb that creates an arpeggio type of sound with evocative pitch-shifted tails. Use the Param knob to adjust the attack of the arpeggio sound.

Slowverb

A sweet ambient reverb with gentle attack and soft harmonics. Param adjusts the amount of direct sound blended with the reverb, allowing you to create deep, immersive tones.

Modulate

Adds a modulation effect to a rich hall reverb sound. Adjust the modulation depth with the Param knob.

+Delay

Combines a delay with reverb, with the length of both effects controlled with the Time knob. Use the Param knob to adjust the delay level.

Lo-Fi

A specialty reverb with limited bandwidth and added distortion. Adjust the distortion amount with the Param knob.

Gate

A distinctive reverb effect that abruptly cuts off the reverb tail. Use the Param knob to control the timing of the gate effect.

Reverse

Plays the reverb sound in reverse. Adjust the high-frequency character with the Param knob.

Instant Sound Creation

Like all 200 series pedals, the RV-200 offers a powerful yet intuitive panel that lets you realize great sounds with minimal effort. Along with core parameters such as reverb time, effect level, and pre-delay, there are variable high and low filters to perfectly balance the verb for your application. You also have a density control to adjust the weight of the sound, plus a parameter knob with access to multiple sound-shaping tools that are unique to each type.

Expressive Performance Control

The RV-200 includes memories for storing 127 reverb sounds, so your favourite setups are always ready to go. Two onboard footswitches pack a lot of performance versatility, with numerous options to reassign their targets to suit your needs. For example, you can bypass the effect, scroll through memories, and activate a Hold function to carry on the reverb effect for as long as the switch is pressed. It's also possible to assign powerful performance effects such as Warp, Twist, and Fade.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Modes: 12 modes- ROOM, HALL, PLATE, SPRING, SHIMMER, ARPVERB, SLOWVERB, MODULATE, +DELAY, LO-FI ,GATE, REVERSE
Memory127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohms
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohm
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass
Controls: ON/OFF switch, MEMORY/HOLD switch, MODE knob, TIME knob, PRE-DELAY knob, E. LEVEL knob, PARAM knob, LOW knob, HIGH knob, DENSITY button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: DENSITY indicator, MEMORY (MAN, 1--4) indicators

Connectors
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type, CTL 1, 2/EXP jack: 1/4-inch TRS phone type, MIDI (IN, OUT) jacks: Stereo miniature phone type, DC IN jack, USB port: USB2.0 micro B (program update only)
Power Supply: Alkaline battery (AA, LR6) x 3, AC adapter (sold separately)
Current Draw: 260 mA

Expected Battery Life Under Continuous Use: Alkaline: Approx. 4 Hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet "USING THE UNIT SAFELY", Leaflet "To obtain the Owner's Manual", Alkaline battery (AA, LR6) x 3, Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
TRS/MIDI connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height(including rubber feet): 65 mm / 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery): 680 g / 1 lb 8 oz

Notes: Dial in Professional Sounds in Seconds

The BOSS ME series has been a favourite of performing guitarists for over three decades, combining multi-effects power with intuitive hands-on control for crafting tones in seconds. The ME-90 is the most advanced ME model to date, offering exceptional audio quality, flagship-grade AIRD amp models, IR loading, an effects loop, and more. Compact, battery-powered, and filled with premium BOSS tones, this versatile all-in-one processor makes it easy to build customized sound setups for every playing situation.

Fast Sound Creation

With its knob-driven interface and diverse effects selection, the ME-90 lets you build configurations and tweak tones with the ease of a stompbox-filled pedalboard-without the hassle of fastening tape, power distribution, and multiple connection cables. Just dial up an amp model or effect type within a category and turn the knobs to get the sound you want. There are 36 preset patches with ready-to-play pro tones, plus 36 user patches for storing your custom creations.

Flexible Real-Time Control

The ME-90 features eight footswitches with smooth, quiet operation and an expression pedal with an integrated toe switch. Use Memory mode to call up complete patch setups with the footswitches, and then switch to Manual mode for direct on/off control of each effect category within the patch. The footswitch LEDs light in different colours for quick identification in the heat of a performance. It's also possible to set all LEDs to light in a fixed colour for each mode if desired.

High-Quality BOSS Effects

The ME-90 puts a massive library of BOSS effects at your command, offering seven different categories filled with selections derived from the flagship GT-1000. Everything you need is here, from overdrives and distortions to pitch/mod effects, delays, and high-quality reverbs. You also get 11 dedicated Pedal FX, a looper, and specialized effects such as acoustic simulation and down tuning. There are 60 effect types in total, with access to over 20 more via BOSS Tone Studio. A send/return loop is available for external pedals, complete with the ability to save the on/off status in patches and place the loop before or after amp models in the signal chain.

Premium Amp Sounds with AIRD Technology

Along with its effects, the ME-90 includes amp models ported from the GT-1000, driven by our advanced AIRD technology for authentic tube tone and touch response. Eleven onboard amp types offer everything from clean combo sounds to punishing high-gain stacks, and you can access more selections in BOSS Tone Studio. Each amp includes a dedicated cab sound for connecting to a PA or recording device, and you can load three of your favourite speaker IRs to personalize sounds to your taste.

Edit, Customize, and Expand

BOSS Tone Studio for macOS and Windows extends your creative range, allowing you to edit tones and change out some amp and effect types with alternate selections. In addition, you can save and organize patches for different gigs, download pro setups at BOSS Tone Central, and swap patches with the ME-90 community on BOSS Tone Exchange. The ME-90 also supports the optional Bluetoothr Audio MIDI Dual Adaptor, enabling you to stream music from a mobile device and wirelessly shape tones using the dedicated BTS editor app for iOS and Android.

Light, Durable, and Ready to Travel

The ME-90 is lighter than its previous generation model while maintaining the rock-solid durability that BOSS is famous for.

Specifications
Sampling Frequency: 48 kHz
AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.
DA Conversion: 32 bits
Processing: 32-bit floating point
Effects: 97 Types
Memories: 36 (User) + 36 (Preset)
Phrase Loop: 38 sec. (MONO)
Tuner Internal Detection: +/-0.1 cent
Nominal Input Level: INPUT: -10 dBu, RETURN: -10 dBu
Maximum Input Level: INPUT: +7 dBu, RETURN: +7 dBu
Input Impedance: INPUT: 1 M ohm, RETURN: 1 M ohm
Nominal Output Level: OUTPUT (L/MONO, R): -10 dBu, PHONES: -10 dBu, SEND: -10 dBu
Output Impedance: OUTPUT (L/MONO, R): 1 k ohm, PHONES: 44 ohms, SEND: 1 k ohm
Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater, PHONES: 44 ohms or greater, SEND: 10 k ohms or greater

Controls:BANK DOWN/AMP switch, BANK UP/EQ switch, CTL/REV switch, MEMORY/MANUAL switch, 1/COMP switch, 2/OD/DS switch, 3/MOD switch, 4/DELAY switch, PEDAL FX switch, Gt. AMP/LINE switch, POWER switch, EXIT button, WRITE button, CTL button, EDIT button, PREAMP TYPE knob, GAIN knob, BASS knob, MIDDLE knob, TREBLE knob, LEVEL knob, REVERB knob, COMP/FX1 TYPE knob, SUSTAIN/SENS/-1OCT knob, ATTACK/TONE/-2OCT/DEPTH knob, LEVEL/PEAK/DIRECT knob, OD/DS TYPE knob, DRIVE knob, TONE knob, LEVEL knob, MOD TYPE knob, RATE/KEY knob, DEPTH/HARMONY knob, E.LEVEL/RESONANCE knob, DELAY TYPE knob, TIME knob, FEEDBACK knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob, PEDAL FX pedal
Display: 7 segments, 2 characters (LED)

Connectors: INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
PHONES jack: Stereo miniature phone type
USB COMPUTER port: USB Type-C(R)
Bluetooth ADAPTOR connector: Dedicated connector
DC IN jack

Power Supply: Alkaline battery (AA, LR6) x 4 or AC adapter
Current Draw: 190 mA

Expected battery life under continuous use:
Alkaline battery: Approximately 6.5 hours
* This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
Accessories: STARTUP GUIDE, Alkaline battery (AA, LR6) x 4, Leaflet "USING THE UNIT SAFELY"

Options (sold separately)
AC adaptor: PSA-S series
Bluetooth(R) Audio MIDI Dual Adaptor: BT-DUAL
Carry Bag: CB-ME80,CB-BU10

Size & weight

Width: 443 mm / 17-1/2 inches
Depth: 220 mm / 8-11/16 inches
Height: 67 mm / 2-11/16 inches
Maximum Height: 93 mm / 3-11/16 inches
Weight(including battery): 2.9 kg / 6 lb / 7 oz

Notes: We have reissued the original Version 1 Big Muff and it's dripping with vintage Electro-Harmonix DNA and tone. Dubbed the Triangle Big Muff because of the layout of its Volume, Sustain and Tone controls, this is the one that started it all. The new Triangle Big Muff is a faithful re-creation of the original circa 1969 circuit now housed in a pedalboard friendly, die cast chassis.

Electro-Harmonix founder, Mike Matthews, stated: "The Big Muff Pi is the pedal we are best known for so I wanted to commemorate EHX's 50th Anniversary (1968-2018) by re-releasing V1, the very first Big Muff. Original pedals are now selling for hundreds of dollars and this reissue absolutely nails that creamy, violin-like sustain and musical tone at a price a working musician can afford.

Notes: The MOD REX is a kinetic tour-de-force that lets you weave compelling, shifting, musical tapestries. Whether you are a guitarist, synthesist or electronic musician you will find it inspires your creativity and stretches your musical boundaries.

Four independent modulation sections:

The heart of the pedal is its four, independent modulation sections synced in time, they are:

MOD features great sounding EHX Vibrato, Flanger, Chorus or Phaser. The Depth knob lets you set the amount of the effect while Feedback controls the resonance of the Flanger and Phaser.

TREM delivers tremolo, an effect that modulates the volume of your signal. The Depth control sets tremolo intensity.

PAN modulates between left and right in stereo operation. In mono operation the PAN section acts as another tremolo section, but with the wave shapes all inverted!

FILTER offers a choice of a modulated LPF, HPF or BPF. In LPF (low pass filter) frequencies above a modulated cut-off point are cut. In HPF (high pass filter) frequencies below a modulated cut-off point are cut, and in BPF (band pass filter) frequencies above and below a modulated centre point are cut.

Each section also features a choice of four LFO shape options: rising sawtooth, triangle, falling sawtooth or square wave. They affect the way the modulation transitions and provide advanced creative control over the specific section as well as the way they interact with each other.

Tempo control that's flexible and powerful:

The MOD REX delivers virtually limitless polyrhythmic possibilities.

Its TEMPO component gives you nine note-length choices for each of the four modulation sections. They are independently selectable in increments starting at a whole note and ranging thru subdivisions that go up to a 16th note. In addition, any of the sections can be bypassed.

The MOD REX's tempo (displayed as beats per minute or BPM) is adjustable with the Tempo knob, Tap Tempo footswitch or by using an expression pedal into its EXP input. It can also be synced to an external device with MIDI Clock or an external pulse clock.

MIDI and the MOD REX:

The pedal's robust MIDI implementation enables you to sync devices quickly and easily as well as automate functions and changes so they occur precisely when and where you want them whether you are working at home, in a studio or live.

The MOD REX accepts MIDI to enable it to tempo sync the modulation rate with an external device, to recall presets via MIDI Program Change messages and to control any parameter on the MOD REX via Control Change messages.

Extras:

The MOD REX lets you save and recall up to 100 presets. It comes from the factory with 20 great programs.

The pedal features full stereo input and output.

An external foot controller input makes banking up and down thru presets quick and easy.

Notes: With 11 reverb types and a ton of "hidden" functionality, the Electro-Harmonix Oceans 11 reverb pedal could be your new go-to reverb pedal. You can tap into classic tones like hall, plate, and spring reverbs, including a brand-new spring reverb algorithm that sounds gloriously complex and rich - you can even double-tap the footswitch to "crash" the spring reverb. And you'll be able to cover a huge range of modern tones with a variety of modulated reverbs, shimmer reverb, reverse reverb, and more. A mode switch offers access to variations on many of the 11 reverb types. Complete with an infinite reverb mode for freeze-style effects, there is vast creative potential in the Electro-Harmonix Oceans 11 reverb pedal.

Reverb types:

Hall - rich and full sound of a grand concert hall
Spring - brand-new tube spring reverb emulation
Plate - lush and warm plate reverb
Reverse - each note fades in backwards
Echo - recirculates echoes through the plate reverb algorithm
Trem - hall reverb plus tremolo
Mod - modulated reverb
Dyna - swells, gates, and ducks in response to your playing dynamics
Auto-Inf - auto-infinite reverb, triggers a wash of reverb with each new note or strum
Shim - shimmer reverb with an octave-shifted wash that blooms behind your core tone
Poly - polyphonic reverb with two pitch shifts operating on your pre-reverb guitar tone

Notes: The MOOER GROOVE LOOP brings together both the MICRO LOOPER and MICRO DRUMMER into one micro pedal, for the ultimate in a portable jamming companion. Both elements can be used independently from one and other or simultaneously.

When used simultaneously the looper will be automatically synchronised to keep in time with the selected drum groove, and an intro click will be played when recording the first loop to ensure you're in time with the groove.

The tap tempo button makes adjusting the groove speed very easy and independent playback level controls for both the Drums and the Looper ensure GROOVE LOOP is a breeze to dial in and adjust on the fly.

Notes: Sculpture is a mini compressor pedal with professional performance. Sustain and level controls adjust the compression and output, whilst blend gives the ability to add back in some of the unaffected signal to give a more natural attack. Hold down the on/off pedal to switch between soft clip and clean compression modes. Perfect for long sustain chords and clean lead tones.

Adjustable sustain and level
Blend control to feed in some natural attack
Selectable soft clip and clean modes
Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied)
Compatible power supply 173.290UK

Power supply: 9Vdc (centre-negative power adaptor required)
Current consumption: 100mA
Input impedance: 1M Ohm
Output impedance: 20 Ohm
Controls: Sustain. Blend, Level, On/Off/Mode switch
Dimensions9: 4 x 53 x 51mm
Weight: 174g

In the box
The box for this item contains :
Sculpture mini pedal

Notes: JTC Pro is an advanced drum & loop pedal with simplified controls, built into a dual switch stomp box pedal with 6 hours of recording capability and 256 loop track memories. Audio recording quality is 24-bit with a 44.1 kHz sample rate. A fully functional built-in drum machine section can be controlled on-the-fly by tapping tempo and punching in fills on demand using the 2 footswitches. A USB interface is included for firmware updates and can even load pre-recorded audio files to be used as backing tracks. Selectable playback modes and output options make this pedal an indispensable accompaniment tool for solo and duo performers.

Notes: The EHX 5MM Guitar Power Amplifier is a pocket-sized power amp that’s a great alternative to a traditional guitar amplifier. It’s super portable and perfect in playing situations where a high-powered amp is not required… like when you’re mic’d on stage, in the studio or as a backup. It produces 2.5 watts so one of the cool things about it is that it doesn’t take much to start getting some nice drive and saturation. Plus, it can be connected directly to any 8 O – 16 O speaker cabinet.

The 5MM is complete simplicity. It features a Volume control and a Bright switch which, when engaged, adds presence to the signal. Since it is a power amp, a preamp, overdrive pedal and, or an EQ in front of it will really let you dial in your tone, but it can be used by itself. The 5MM Power Amplifier also comes equipped with its own power supply.

Notes: The EHX 22500 is a stereo looper with two independent loops that can be played in sequence or in parallel. Flexible performance controls and creative effects allow you to loop in any way you imagine. It records high quality, non-compressed audio directly to a removable SDHC card (4 to 32 GB) and each card holds up to 100 individual loops. Includes an 8GB card for up to 12 hours of recording time.

Creative controls over looping functions such as adjustable tempo, programmable loop/overdub length, and two loops that can playback independently or locked to one another makes the 22500 act like the looper of your dreams.

Download free drum loops for the EHX 22500

Dual stereo loops with independent or locked loop lengths
Sequential looping mode enables verse/chorus switching
Parallel looping mode allows simultaneous playback of two loops
16 built-in drum loops
Selectable microphone input with phantom power
Reverse and Octave functions
Undo-Redo your last overdub or recording
Quantize or non-quantize (free running) modes
USB port enables backup/restore to PC or Mac
Programmable third footswitch for Stop or Tap Tempo
Optional external Loop Up/Down Foot Controller
Power adapter included

SPECIFICATIONS
Circuit
Digital
Bypass
Buffered Bypass
Audio
Stereo
Power Supply
9.6VDC-500mA power adapter included
Dimensions (in)
5.75 x 4.75 x 2.5
Current Draw
235mA
Year Released
2015

Notes: A bass chorus inspired by the legendary Small Clone, optimized for bass and low-end clarity!

The EHX Bass Clone Chorus pedal's core circuitry is nearly identical to the legendary Small Clone chorus, but with added features especially for bass. Chorus is a combination of modulated and dry signals. The Bass Clone's Crossover switch cuts low end from the modulated signal so the pedal delivers a more accurately articulated bottom end with excellent note definition. The Treble control affects the whole signal while the Bass control only affects the dry half. Together with the Crossover switch they provide precise sound shaping that lets you achieve a tight, focused bass guitar sound with a well-defined low end and shimmering chorus on top.

Compact chorus based on the legendary Small Clone with added features for bass
Provides precise sound shaping control for a tight, focused sound with a well-defined low end and shimmering chorus on top
Delivers an accurately articulated bottom end with excellent note definition
True bypass switching for maximum signal path integrity when in bypass mode
Tough, compact die-cast package
9V battery included

SPECIFICATIONS
Circuit
Analog
Bypass
True Bypass
Audio
Mono
Power Supply
9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in)
4.5 x 2.75 x 2.1
Current Draw
15mA
Year Released
2016

Notes: Killer wah and cocked wah sounds!

The EHX Wailer Wah features the great sound and tone of the award winning Crying Tone Wah in a rugged, lightweight pedal and with a traditional rack and pinion style operating mechanism. It's also extremely affordable.

Traditional rack and pinion style operating mechanism
Super affordable
Rugged yet lightweight, at just over 1.5 pounds it's lighter than most popular wah pedals and a real weight saver for your pedalboard
9V battery included

SPECIFICATIONS
Circuit
Analog
Bypass
True Bypass
Audio
Mono
Power Supply
9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in)
9.92 x 3.4 x 3.0
Current Draw
6mA
Year Released
2016

Notes: If guitar is your passion, you need freedom and flexibility to explore all of its sound possibilities. The Zoom G3n Multi-Effects processor removes any creative barriers in your way.

The G3n is a versatile multi-effects processor that lets you defy genre with the most realistic stompbox, cabinet, and amplifier emulations Zoom has ever created. Its high-quality sound, portable design, 80 second Looper, and intuitive interface make it the perfect addition to your pedalboard. To put it simply, the G3n offers all the sounds and tools you need to improve your tone and sound greater than ever.

Boutique Pedals, Legendary Amps, and Superior Effects:

The G3n is pre-loaded with 70 expertly crafted and assembled DSP effects (68 effects, 1 looper pedal, and 1 rhythm pedal), plus 10 of the most realistic amp/cabinet emulators Zoom have ever created. Zoom have loaded the G3n with essential guitar sounds like overdrive, distortion, compression, EQ, delay, reverb, flanging, phasing, vibrato, and chorusing. Unique multi-effects such as Seq Filter, Reverse Delay, HD Hall, and OSC Echo are also included.

Create Complex Signal Chains:

Use up to seven effects and amp/cabinet models simultaneously, chained together in any order you like. It's like having hundreds of fully loaded pedalboards all in one compact and easy-to-use device.

Accurate, Realistic Amp and Cabinet Emulation:

Choose from five classic amp models and adjust the sound exactly as you would with the knobs and switches of the real thing - and then pair your amp with one of the five new cabinet emulators to complete the sound. Plus, you can download even more faithfully recreated amp/cabinet combinations such as Fender Bassman, Hi-Watt Custom 100, Mesa Boogie Dual Rectifier Orange Channel, Fender '65 Deluxe Reverb, and Orange Graphic120 - available now with more being released every month.

75 Custom-Crafted Patches and Counting:
Recreate essential guitar tones and pioneer new territory with 75 custom-designed patches created exclusively by Zoom guitarists. Use these patches to emulate the iconic sounds of Eddie Van Halen, Jimi Hendrix, Jimmy Page, Carlos Santana, Michael Schenker, and Brian May or explore something completely brand new.

Fast and Intuitive Editing:

The G3n's switches and knobs give you enhanced control and have the responsive, hands-on feel of a standard stompbox. The G3n combines three LCD displays to show whole effect-chains at a glance, making it easy to add, delete, or change the order of effects quickly. Plus, you can store up to 150 of your custom effects-chains as patches.

Practice and Perform:

There are 68 built-in rhythm patterns included with the G3n, making it the perfect practice rig and enabling "one-man band" performances. An onboard Looper (which can be used with the rhythm patterns) allows you to record and overdub phrases up to 80 seconds long through the effects of your choice. A built-in chromatic tuner lets you bypass the currently selected patch while tuning, or mute the signal altogether.

Inputs and Outputs:

The G3n can be easily integrated into any live performance or studio rig. In addition to a standard guitar input, there's an auxiliary stereo input for connecting smartphones or music players. It also includes a dedicated headphone jack for practice and dual outputs for mono or stereo L/R connection to guitar amps, PA systems, and audio interfaces. The Mic On/Off feature lets you optimize the G3n for use with a real amp and cabinet (Mic Off) as well as optimize for playing through a PA system or recording direct with amp and cabinet emulators (Mic On).

ZOOM Guitar Lab Software:

The free ZOOM Guitar Lab Mac/Windows software enables you to manage your patches and download new effects and amp/cabinet emulators. It includes both a Patch Manager for effects chains and an Effects Manager, with a simple graphic user interface that provides point-and-click control over re-naming or re-ordering your custom patches.

Notes: An advanced, feature laden, stereo overdrive and distortion pedal with a broad range of options and controls. With the Operation Overlord - whether you play keyboards, guitar, bass or pretty much any electronic instrument - dialling in great drive sounds is fast and fool-proof. Active, Treble, Mid and Bass controls, a foot-switchable Boost mode and a dry blend deliver superlative sound shaping. It even features two independent channels for use with stereo setups. Whatever your rig, the Overlord is your indispensable ally.

Notes: EHX has grafted technology found in keyboard and modular synthesizers into a pedal designed for guitarists and bass players. The Blurst modulates an instrument's sound like an envelope filter, but instead of the filter's response being controlled by playing dynamics, it's controlled by an internal oscillator. The Blurst is a must have for the adventurous player who wants to explore new sonic territory!

Introducing the Blurst, a radical modulating filter. It's an effect often used on synthesizers, but we've designed the Blurst especially for guitar players and bassists who want to explore new sonic territory.

It features an analog, low pass filter with adjustable resonance, three modulation waveform shapes, tap tempo with tap divide and EXP control over Range, Rate or Filter. An EHX 9.6DC/200 AC adapter is included.

The Blurst is a must have for the experimental musician and works well with an expression pedal, the EHX 8-Step Program and other control voltage sources. Whether used alone or with other effects, the Blurst's hypnotic effects are spellbinding!

Notes: The EHX Bass Mono Synth transforms your bass into eleven great sounding synthesizers... from vintage synth emulations to thick, stacked voices to deep pulsing sounds and more.

Its intuitive layout makes it easy to use and easy to dial in good sounds quickly. DRY controls the volume of your dry bass signal at the Synth Output. SYNTH controls the volume of the Synthesizer sound at the Synth Output. Used together they let you create just the right mix. The SENS control, short for sensitivity, adjusts how your playing dynamics trigger the synthesizer and allows you to fine tune the way the pedal responds to your bass rig and playing style.

With the CTRL knob you can adjust a key parameter for each of the eleven synth types. It varies depending on the preset and provides more tweakability for customizing your sound. There’s also an EXP input which lets you control an entirely different parameter in real-time with an expression pedal!

Using the built-in Preset footswitch, a user customizable preset for each of the eleven synth sounds can be created, saved and recalled. The factory presets are also easy to restore should you wish to.

From lush, warm sounds to sharp, percussive stabs, the Bass Mono Synth puts a collection of cool bass synths at your fingertips.

Notes: Produces volume and reverse swells, backward tape sounds, artificially short staccato notes and bowed instrument effects!

The circa-1980 Electro-Harmonix Attack Decay is a sought after prize among vintage pedal aficionados. Originally called a Tape Reverse Simulator, it's known for producing volume and reverse swells, backward tape sounds, artificially short staccato notes and bowed instrument effects. The freshly designed EHX Attack Decay reinterprets the classic and keeps its cool factor, but adds some modern features for convenience and enhanced functionality.

It can produce a single volume envelope like the original, or, with Poly engaged, put separate volume envelopes on each note you play. The built-in Harmonix fuzz is now a fully controllable distortion with gain, tone and volume controls. The effects loop allows the musician or sound designer to place the volume envelope onto whatever signal is present at the Return jack. Expression pedal/CV input and three user presets give the user total control over their Attack Decay!

Volume envelope manipulation with adjustable Attack and Decay times
Mono mode: one volume envelope at a time, the envelope resets when you play a new note
Poly mode: gives each note you play its own envelope
Built-in, fully adjustable, Harmonix fuzz enhances the volume envelope effect and produces bowed instrument sounds
Built-in effects loop allows for your own pedals to be inserted onto the volume envelope
Expression pedal or CV control over every knob on the Attack Decay
Save and recall up to three presets
Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Effects Loop: Yes
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.75 x 4.13 x 2.25
Current Draw: 140mA
Year Released: 2019

Notes: An intuitive looper with 720 seconds (12 minutes) of stereo recording time on 10 independent loops and unlimited overdubbing that's perfect for practice and live performance!

The EHX 720 Stereo Looper is a powerful looping tool with 12 minutes of stereo recording time, 10 loop memory banks, and creative performance functions. Its simple-to-use design makes it an easy and effective to use in both live and practice situations.

The 720 records in high-quality stereo for use with stereo effects or even use with two instruments. A second footswitch can be programmed to stop loop playback or toggle on/off the built-in Reverse and 1/2 Speed playback effects. The programmable Fadeout mode applies an automatic fade when playback is stopped.

-Extra-long 12 minutes of stereo recording time
10 independent loops
Undo-Redo, Reverse and 1/2 Speed Effects at the touch of a button
High-quality, uncompressed audio, 24-bit A/D/A converters plus 44.1kHz sample rate
Stereo in/out for enhanced usability... record two instruments at once
Foot controller input provides a way to use popular 3-button foot controllers to change a bank up or down, and gives access to instant Undo-Redo
Silent footswitches
Loop fadeout (trails) mode
Power adapter included

Specifications
Circuit: Digital
Bypass: Buffered Bypass
Audio: Stereo
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.75 x 4 x 2.25
Current Draw: 75mA
Year Released: 2015

Notes: The ultimate rotary speaker emulator packed with goodies like a specially designed compression circuit to supercharge the rotating speaker effect on guitar.

Lester G's comprehensive controls include fully adjustable tube-style overdrive, Fast and Slow modes and an Acceleration control to dial in the rate at which the effect transitions between speeds. The sound of that giant wood cabinet will now fit on a pedalboard!

*UK 3-pin power supply included

Notes: The TRIO+ is a simple-to-use guitar pedal that listens to the way you play and automatically generates bass and drum parts that match your song. Just plug your guitar into the TRIO+, press the Band footswitch to teach the TRIO+ your chords and rhythm, then press the Band footswitch again to start playing with your own personal band! Bass and drum levels can be adjusted for the perfect mix using the TRIO+'s Bass and Drums knobs. The TRIO+ also features a Simple Bass button lets you select between 3 bass line modes for busy or simple bass lines. Pushing the Band Creator™ paradigm further, the TRIO+ also allows you to loop and custom sequence your looped guitar parts to create full songs on the fly. Press the TRIO+'s Looper footswitch to record a loop along with an unlimited number of overdubs. The Loop level can be individually controlled using the TRIO+'s Loop knob. Loops can be recorded by themselves, operating just like a traditional looper, or along with the band. You can also apply built-in effects to your guitar signal by enabling the TRIO+'s Guitar FX button, or connect your favorite effects to the TRIO+'s FX Send and FX Return jacks. The TRIO+ provides 12 music genres to choose from including Blues, R&B, Rock, Alternative Rock, Metal, Pop, Electronic Pop, Hip-Hop, Country, Folk, Latin, and Jazz. 12 song styles are available for each genre and can be selected using the TRIO+'s Style encoder, including selection between 3/4 and 4/4 time signatures. Multi-colored LEDs around the TRIO+'s Style encoder indicate which styles best match your song. The TRIO+ can learn up to 5 different song parts, perfect for creating an intro, verse, chorus, bridge and outro. Song parts can be recalled on-the-fly as the song plays back or pre-programmed as a sequence for automated playback. An optional DigiTech FS3X Footswitch can be connected to the TRIO+'s Control In jack for additional handsfree control with 3 modes of operation to select from. Up to 12 songs along with loops can be stored to the TRIO+'s Micro SD Card (included). Need to create more songs? No problem. Just insert a new SD Card and you're ready to start teaching the band your new songs. To manage all your songs and loops on a computer, download the free Librarian Manager software from digitech.com, available for Windowsr and Macr. The TRIO+ offers independent Tempo, Genre, Style, Loop Level, Bass Level, Drums Level, Headphone Output Level controls; Guitar, FX Return and Control Inputs; Amplifier, Mixer, FX Send and Headphone Outputs; Built-in Guitar Effects (relative to music genre); a Soft Click Footswitch and includes a 9V DC adapter.

General Specifications
ControlsTempo, Genre, Style, Loop, Bass, Drums, Headphone Volume
Backlit ButtonsGuitar FX, Seq, Part 1-5, Alt Time, Song, Simple Bass
FootswitchesLooper, Band
LEDsGenre types, Style 1-12, Audiolastic, Looper, Band
JacksPower, Control In, Guitar In, FX Return, FX Send, Amp Out, Mixer Out, Headphone
OtherMini USB port, microSD card slot
Bit Depth24-bit
Sample Rate44.1 kHz
Signal-To-Noise Ratio110dB, A-weighted
Maximum Recording Time230 seconds per song part i based on a minimum 50 BPM and 48 bars per part
USB TypeMini-B
SD Card TypemicroSDHC, Class 10
SD Min/Max Storage Size8 GB/32 GB
Power Requirements9 VDC external power adapter
Power Consumption7.2 W
Current Draw800 mA
Dimensions
Length5.4"
Width4.25"
Height2.5"
Weight1.46 lbs.
Audio Output
Amp Output TypeUnbalanced, 1/4" TS
Amp Output Impedance1 kO
Mixer Output TypeUnbalanced, 1/4" TS
Mixer Output Impedance1 kO
FX Send Output TypeUnbalanced, 1/4" TS
FX Send Impedance1 kO
Headphone Output Type1/8" (3.5 mm) Stereo Mini Jack
Headphone Output Impedance120 O
Audio Input
Guitar Input TypeUnbalanced, 1/4" TS
Guitar Input Impedance1 MO
FX Return Input TypeUnbalanced, 1/4" TS
FX Return Impedance1 MO
Control Input Type1/4" TRS (compatible with DigiTech FS3X)

Notes: EHX's rich history was marked by many revolutionary pedals but one of our most distinctive lines was a group of analog drum synthesizers that included the Crash Pad.

Like the original from 1980, the new Crash Pad can create an array of drum sounds and other-worldly oscillation sweeps, as well as process external sounds thru its resonant filter. Plus, it's been updated to respond to expression pedal/CV input for external control over the filter in real-time.

Notes: The legendary Whammy pedal is the premier pitch-shifting pedal for any guitarist's board, and it only gets better with time. In addition to the classic Whammy sound, we've added chordal Whammy pitch-shifting and true bypass.

Whammy artists have won over 60 Grammysr using its unique pitch-shifting sound to enhance their music. Its songs echo the hallways of the Rock & Roll Hall of Famer and generate acclaim on over 700 million albums around the world. There is no doubt why Whammy is one of the most common sights on guitarists' pedalboards.

The Whammy can bring new depth to your artistry. Turn your solo into raging, rebellious screams of tone or tame your crowd with highly expressive, ambient chordal bends. Energize your audience with a scratchy note frenzy, bring them in and out of the sound tunnel with musical bursts, or carry them through an existential exploration of full-fretboard pitch translation. The Whammy puts expression into the expression pedal.

Don't be the last guitarist without a Whammy! The iPB-10 unleashes the ability to create and control guitar effects like never before.

General Specifications
Sample Rate44.1 kHz
Frequency Response20 Hz to 20 kHz
Signal to Noise Ratio> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
A/D Conversion24 bit
D/A Conversion24 bit
Power Consumption2.4 Watts (< 265 mA @ 9 VDC)
Power Adapter9 VDC External Adapter
Dimensions
Height2.5"
Width6.5"
Depth7.75"
Audio Output
Output Type1/4" Unbalanced TS
Max Output Level+10 dBu
Output Impedance1 kO
Audio Input
Instrument Input Type1/4" Unbalanced TS
Max Input Level+5 dBu
Input Impedance1 MO
MIDI Input5-Pin Din

Notes: Introducing a new addition to the DigiTech Whammy Family -- Whammy DT! We've taken the premier pitch shifting effects pedal added drop tuning and true bypass to bring you the ultimate Whammy pedal, the Whammy DT. With the Whammy DT, you can modify your tuning without having to change guitars or pause awkwardly to make adjustments for the next song. Key changes are at the tips of your toes and take just moments, which is crucial when the audience is feeling your vibe. Pitch shifting effects really help your guitar performance stand out and the Whammy pedal has been the core pitch shifting effect for famous artists for over 20 years. Now add full drop and raised tuning in addition to classic Whammy shifting to your effects arsenal and find out why the Whammy DT is the premiere pitch shifting effects pedal for every guitarist.

General Specifications
D/A Conversion24 bit
Pitch Bend Range+2/-3 Octaves
Detune Range-4 to -30 cents
Drop Tune Range1-7 Semitones, Octave, Octave + Dry
Power Consumption2.6 Watts (< 288 mA @ 9 VDC)
Power Adapter9 VDC External Adapter
Sample Rate44.1 kHz
Frequency Response20 Hz to 20 kHz
Signal to Noise Ratio> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
Dimensions
Height2.36"
Width8.2"
Depth7.73"
Audio Output
Output Type1/4" Unbalanced TS
Max Output Level+10 dBu
Output Impedance1 kO
Audio Input
Instrument Input Type1/4" Unbalanced TS
Max Input Level+5 dBu
Input Impedance1 MO
MIDI Input5-Pin Din
Footswitch Input1/4" TRS - for use with optional FS3X Footpedal

What's in the box?
1 x Whammy DT Pedal
1 x Power Supply

Notes: The DigiTechr Drop is a dedicated polyphonic drop tune pedal that allows you to drop your tuning from one semitone all the way down to a full octave. Get down-tuned chunk without having to change guitars! The Drop also features a momentary/latching switch. With the switch set to momentary, you can turn the Drop into a true performance pedal. Fast trills and roller-coaster pitch dips are at the tip of your toes.

General Specifications
Input1/4" Unbalanced (Tip-Sleeve)
Output1/4" Unbalanced (Tip-Sleeve)
ControlsAmount, Momentary On/Off
A/D/A Converter24-bit
Sampling Rate44.1 kHz
Power SupplyPS0913DC-01 (US, JA); PS0913DC-02 (EU, AU, UK)
Drop Tune Range1-7 Semitones Down, Octave Down, Octave Down + Dry
Dimensions
Length4.75"
Width2.875"
Height1.75"
Weight0.36 lbs.

Notes: The Eventide H9 Max features 45 algorithms and 99 factory presets from Space, TimeFactor, PitchFactor and Modfactor. More Presets are available via the H9 Control app and offer a huge range of effects; you may never need another stomp box again.

The H9 Max Stomp Box is fully controllable via its simple front panel one-knob user interface, but can also be controlled via a free iOS app, H9 Control, which can be downloaded to your iPhone or iPad for live editing, creating and managing presets and changing system settings wirelessly via Bluetooth. H9 Control is also available for your Mac and PC via USB.

The Eventide H9 features stereo audio I/O, MIDI I/O, Expression Pedal, and Auxiliary Switch inputs.

The H9 comes loaded with a set of Eventide's most popular algorithms taken from their award winning stomp boxes:

From ModFactor:
- Liquid Chorus
- Organic Chorus
- Shimmer Chorus
- Classic Chorus
- Phase XO Chorus
- Bias Tremolo
- Opto Tremolo

From PitchFactor:
- H910
- H949
- Crystals
- Tuner

From TimeFactor:
- Tape Echo
- Vintage Delay

From Space:
- Shimmer
- Hall

Notes: 44 watts of clean and natural power in a pedal-sized package!

The EHX 44 Magnum Guitar Power Amp head delivers 44 watts of clean and natural power but can also deliver a true amplifier overdrive at the turn of a knob. From your pocket to the stage, the 44 Magnum is the perfect gigging and practice solution. Despite being described as a "guitar head" the 44 has the character and control to work with any electric instrument. Flip the brightness switch for a more defined top end. The sweet tone with an extra power edge that can sit in any backline.

44 watts of power into 8 or 16 ohms
Tone switch toggles between a neutral, flat setting and a Musical top end boost
Maximum headroom potential
Can be driven to a natural, true amplifier saturation
Fits in the palm of your hand
Power adapter included

SPECIFICATIONS
Circuit
Analog
Audio
Mono
Power Supply
24VDC-3000mA power adapter included
Dimensions (in)
4.5 x 2.75 x 2.1
Current Draw
2000mA
Year Released
2010