100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 36 of 36 on page 1 of 1
Cat: 621355 Rel: 28 Nov 16
 
Breakout expander for the Batumi quadruple LFO module
Notes: Poti is a simple but very useful breakout expander for the Batumi quadruple LFO module by Xaoc Devices. Its panel provides an immediate access to the Batumi functions originally selected by the cluster of jumpers on the back of the module: Reset/Sync mode option and selection of the assignable waveform.
Read more
 1 in stock $45.53
Click for better price!
quote 621355
Cat: 714702 Rel: 19 Dec 18
 
Self-powered DinSync24 to Trig Divider
Notes: The Triglostek is a self-powered DinSync24 to trigger converter, to sync an Eurorack to a DinSync24 device. It needs no extra power supply.

It features a clock divider which can divide the clock by /3, /6, /24 and /48, selectable thanks to a jumper.
Read more
$45.53 SAVE 20%
 1 in stock $36.42
Cat: 714701 Rel: 19 Dec 18
 
Self-powered white noise generator
Notes: This cable expands every synth without a noise generator but an external audio input and a 5V source at the tip of a socket (e.g. an expression pedal input) and gives you digital noise. Initially the cable has been developed as an expansion for the Moog products Little Phatty and Minitaur but it works also with other synths etc. The Hirlostek needs to be provided with a 5V voltage, for instance at the tip of a expression pedal socket. A circuit inside of the bigger plug generates a bright digital noise you can use as audio or modulation source. The narrower plug carries the noise signal and is to be connected either with an audio input or a CV input. Hand made, military quality due to good Neutrik jacks.
Read more
$46.56 SAVE 20%
 1 in stock $37.25
Cat: 714698 Rel: 19 Dec 18
 
Self-powered white noise generator
Notes: This cable expands every synth without a noise generator but an external audio input and a 5V source at the tip of a socket (e.g. an expression pedal input) and gives you digital noise. Initially the cable has been developed as an expansion for the Moog products Little Phatty and Minitaur but it works also with other synths etc. The Hirlostek needs to be provided with a 5V voltage, for instance at the tip of a expression pedal socket. A circuit inside of the bigger plug generates a bright digital noise you can use as audio or modulation source. The narrower plug carries the noise signal and is to be connected either with an audio input or a CV input. Hand made, military quality due to good Neutrik jacks.
Read more
 2 in stock $38.28
Cat: 658619 Rel: 13 Sep 17
 
SD card for the ONE modular synth module
Notes: DOTS features 256 short/dots one shot sounds created specifically for ONE to further extend ZV_K's live Tiptop drum setup. These sounds were selected for their percussive transient response but are also great as monophonic sound sources to use alongside analog synth when sequenced. DOTS are samples of the signature sounds of Buchla, Cwejman, Mutable Instruments, Jomox, Mungo, Industrial Music Electronics (aka The Harvestman), HexInverter, Make Noise, Monomachine, Vermona, Audio Damage. Bastl, Epoch, Mungo, Delptronics as well as some human voice artefacts and even a prepared piano. Each sound was carefully selected from hours of recordings, edited but not altered to retain the original sound's qualities and dynamics and was extensively tested using the module to make sure all the sounds sound good at any setting. DOTS are very easy to fit into a mix, run through effects and are very well suited to be used and abused by a modular system.
Read more
 2 in stock $26.91
Cat: 641111 Rel: 28 Feb 17
 
Micro SD Card with 256 fresh sounds for the One sample player
Notes: PERC features 256 percussion sounds with tight attacks and a bright harmonic spectrum. This collection is specifically focused on shorter percussive samples and includes material such as multi-layer drum & percussion hits, chopped & processed loops, synthesized FM strikes, mallet and bell tones, sampled drum machines, various toms and hand drums, obscure noise boxes, sampled old-school game chips and much more. PERC makes full use of ONE's snappy character.

All samples on the card are available for playback at 48k, 64k and 96k for maximum versatility in pitch control while maintaining latencies of as low as 0.25 ms.

Design by: Glitchmachines
Type: One Shot
Character: Percussive

Only compatible with the Tiptop Audio One Digital Audio Flux Eurorack Module.
Read more
 1 in stock $26.39
Cat: 595820 Rel: 03 Aug 16
 
Links up to 3 Zeus Studio Bus boards with an external power supply - 4HP wide
Notes: Zeus Access provides a simple, fast, and cost-effective solution for linking up to three Zeus Studio Bus boards with an external Cincon-TTA brick-style power supply. It is a tethered 4HP space-saving front panel with a long lasting high power rating On/Off switch and power socket.

It comes fully assembled and wired with 16AWG wire and plated copper terminals leads that require no additional assembly or special tools for connecting to a Zeus Studio Bus board.
Read more
 1 in stock $35.71
Cat: 595807 Rel: 19 Jan 16
 
3U rack ears for use as either tabletop or rack mount frame
Notes: The Z-Ears Tabletop are standard 3U rack ears that can be used as either a tabletop frame or standard rack mount frame. These parts are made of anodized aluminium and are custom made to work with Eurorack mounting rails like Z-Rails.
Read more
 1 in stock $23.81
Cat: 683513 Rel: 09 Apr 18
 
Sample library for the Tiptop Audio One by Joseph Fraioli aka Datach'i
Notes: Tiptop Audio and award winning sound designer/electronic music artist Joseph Fraioli AKA Datach'i come together in the form of the new Datach'i One card. The card, to be used exclusively in the Tiptop ONE Sample Player, contains 187 unique sounds ranging from organic recorded elements and electronic percussion to dramatic gestures, ambiences and melodic sequences. Created with field recordings, the Eurorack modular synthesizer, Symbolic Sound Kyma system and boutique electro acoustic instruments, all sounds were recorded at 24 bit/96k quality for maximum resolution in pitch control while maintaining latencies of as low as 0.25 ms.
Read more
 2 in stock $26.13
Cat: 719686 Rel: 02 Sep 19
 
Classic wavefolder for the AE system
Notes: This module is based on a design used also by Ken Stone for his CGS system; the original circuit dates back to a publication from 1973.

Basically, the WAVEFOLDER clips and folds the incoming waveform; usually, waveforms with little overtones (like triangle or sinewaves) are used as input. In general, by the clipping and folding, the signal enriches the input signal with more overtones.
Read more
 1 in stock $33.64
Cat: 719656 Rel: 03 Sep 19
 
State variable filter
Notes: This module is a classic state variable filter.

It offers the control knobs cut-off frequency, resonance and CV attenuator; two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter, this module has a significant self-resonance, and also a very quick response to cut-off frequency changes.

Three different outputs provide lowpass, bandpass and high-pass output.
Read more
 1 in stock $36.21
Cat: 719654 Rel: 12 Sep 19
 
Spring reverb module
Notes: Unique, vintage reverb sound.

The SPRINGREVERB module brings the unique sound of this quite old (introduced in the 60's) technique for creating reverbs to the AE modular.

IMPORTANT NOTE: This is only the module without spring tank and connection cable; with this module alone, you get no reverb. This is for users who want to use their own spring tanks.
Read more
 1 in stock $39.32
Cat: 719676 Rel: 02 Sep 19
 
Noise generator
Notes: Analogue & Digital Noise Module.

- The A output generates analogue noise (technically, a fluctuating voltage between about 1...4V)
- The D output generates digital noise, which is a random changing 0V / 5V

The RATE knob controls the colour of the noise, which goes from almost white noise on A output and knob fully clockwise to a rather harsh and digital sound on D output and RATE counter-clockwise.
Read more
 1 in stock $25.86
Cat: 719678 Rel: 02 Sep 19
 
Audio mixer with 4 inputs
Notes: This module consists of an audio mixer with 4 inputs and their level knobs, plus an additional 4 separate inputs that are mixed at full level (especially for mixing CV signals), and a separate output.
Read more
 1 in stock $27.17
Cat: 719682 Rel: 02 Sep 19
 
Dual NAND, AND, XOR inverter
Notes: The LOGIC module combines two inputs by different logical rules (AND, NAND, XOR). This can be used either for operations on trigger/gate signals (let gate signals pass depending on other signals, invert them depending on the other input etc), or for audio signals, where you get ringmodulator-like sounds when feeding two different oscillator frequencies.
Read more
 1 in stock $24.58
Cat: 719659 Rel: 02 Sep 19
 
Mono delay module
Notes: This module is a standard mono delay with the usual parameters:

- Delay time
- Feedback
- Dry/wet mix

It sounds not as clean and polished as a usual digital delay but has quite a character on its own. High feedback settings allow endless and distorting loops.

(For the techies: It is based on the well-known PT2399 chip.)
Read more
 1 in stock $37.78
Cat: 719673 Rel: 02 Sep 19
 
Clock divider module
Notes: The BEAT DIVIDER takes a clock signal (the BUS CLK which presents the MIDI clock from the MASTER module) and divides it to musical clock dividers, selectable from 1/2... 1/32.

Additionally, a second output provides the dotted or triplet clock of the selected divider value.
Read more
 1 in stock $27.17
Cat: 719699 Rel: 03 Sep 19
 
Amplifier for audio signals
Notes: 2SIGNALAMP contains two amplifier stages for audio signals; the amplification can be adjusted up to 15:1.

A clip LED indicates that the amplified level exceeds the usual range of AE modular and is short before clipping.

Main purpose of this module is to boost external audio signals for further processing within AE modular, or also the triangle output of the VCO which has by design a lower signal amplitude.
Read more
 1 in stock $28.72
Cat: 719663 Rel: 02 Sep 19
 
Dual audio & CV level attenuator
Notes: 2ATT/CV contains two units of a simple level attenuator for any kind of signal. You can also switch to voltage mode and get manually controllable CV on the outputs.
Read more
 1 in stock $28.46
Cat: 701430 Rel: 07 Sep 18
 
Passive mixer board for audio
Notes: The RK-003 is a little kit we made to mix your gear in the simplest way possible. The mixer can be used for audio but also for e.g. the splitting of sync signals.

Note: This is a 'passive mixer' which means there is no amplifier in it, only small resistors to protect the gear you're mixing. You have to adjust volume on the devices itself and expect a volume drop which needs to be compensated on the amplifier on which your mixing to.
Read more
 1 in stock $36.21
Cat: 641958 Rel: 28 Feb 17
 
2HP splitter module for stereo signals into mono
Notes: Quantic Fictus is a simple 2HP splitter for stereo signals into mono. It was built specifically to interface with the Keith McMillan Qu-Nexus but can be used for any sort of stereo interfacing. It is passive so can also be used to combine mono signals into stereo.

Size: 2HP Eurorack
Depth: 1 Inch
Power: None
Read more
 1 in stock $34.67
Cat: 557508 Rel: 19 Dec 14
 
Multiple signal sending module
Notes: The Multiple is a simple but important module that allows for sending a signal to multiple destinations. Within the Make Noise system the Multiple may also be used for combining clock, gate and pulse signals together to create interesting timing sources (in other words, it acts as a Gate combiner aka logic OR circuit).

It has 9 inter-connected sockets that may be split into different group combinations depending upon how it is patched. The jacks circled in white will make or break the interconnects between the 3 groups of three, thus allowing for three 3-way, one 5-way/ one 3-way or one 7-way multiple.

The Multiple is passive, because the Make Noise system does not require Buffered Multiples since all critical control signals are already buffered in such a way as to provide a large fan-out capability.
Read more
 2 in stock $35.71
Cat: 689041 Rel: 19 Jun 18
 
Front panel for the Koma Elektronik Field Kit
Notes: Use this panel to mount your Field Kit in your Eurorack System.

Please note: This only includes the Eurorack Panel, NOT the full Field Kit.
Read more
 3 in stock $31.04
Cat: 739060 Rel: 29 Jul 19
 
Dedicated jack expansion module for use with the Stereo Out 1U module
Notes: 1/4" TRS jack panel in 1U for the Stereo Line Out 1U module.

If you don't own an Intellijel case with built-in compatible 1/4" jacks, then you need to purchase a Stereo Out Jacks 1U module, which connects via ribbon cable to the Stereo Line Out 1U module to provide 1/4" TRS output jacks for interfacing with other studio or stage gear.
Read more
 1 in stock $23.55
Cat: 673902 Rel: 12 Jan 18
 
1/4" TS jack interface for the Pedal I/O 1U system - 8HP
Notes: The Pedal I/O JACKS 1U Module allows you to patch standard 1/4? TS cables to and from your guitar/instrument pedals.

This module only works when connected to a Pedal I/O 1U module via ribbon cable.
Read more
 7 in stock $22.25
Cat: 602202 Rel: 04 Apr 16
 
Passive multiple synth module
Notes: Dual 1x5 Passive Multiple

Two rows of 1 x 5 Passive Multing
Read more
 1 in stock $27.69
Cat: 673911 Rel: 15 Jan 18
 
Balanced TRS 1/4" input path to Eurorack modular signal level
Notes: This module allows you to connect balanced line level audio (+4 dBu) into your Eurorack modular system. It is a compact and easy way to patch in a rack mount/desktop FX units, external line-level instruments like synths and drum machines, outputs from your DAW, or many other line level sources.
Read more
 2 in stock $39.85
Cat: 643380 Rel: 27 Mar 17
 
Buffered multiple module in 1U
Notes: Dual 1 x 4 buffered mult (one audio or cv signal in with multiple buffered outputs).

The output of the first mult is normalled to the input of the second mult to create a 1×8 buffered mult.
Read more
 4 in stock $39.85
Cat: 607334 Rel: 04 Apr 16
 
TRS jacks for the Audio I/O interface in 1U module - 16HP wide
Notes: TRS jacks for the Audio I/O interface in 1U.

You need this module for the Audio I/O 1U

This module is not needed if you have the 7U performance case that comes with rear mounted audio i/o jacks.
Read more
 1 in stock $23.79
Cat: 674886 Rel: 15 Feb 18
 
Eurorack buffer board
Notes: Active buffer board for the MTX9. Presents unity mixing and buffered splitting. Supplied with all necessary cabling and hardware.
Read more
 1 in stock $47.60
Click for better price!
quote 674886
Cat: 686691 Rel: 27 Apr 18
 
Companion board for uploading your samples to Pico Drums
Notes: If you wish to upload your own drum samples to Pico Drum module, you'll need the Pico Drum Programmer. Please refer to the Pico Drum user manual for sample upload instructions via a plug in for the Google Chrome browser.

- 5 pin header connects with the module, USB header connects with the computer
- USB cable is not included
Read more
 4 in stock $23.79
Cat: 714707 Rel: 22 Jan 19
 
4HP Eurorack module consisting of four buffer circuits for control voltages
Notes: Module A-180-4 is a fourfold CV buffer. Buffers are required if the control voltage coming from a CV source shows a voltage drop in case of changing loads or due to other reasons a buffering is required.

For the lower three units the input is normalled to the output of the above unit. That way the module can work as 1-in-4 buffered multiple provided that no signals are applied to the inputs of the three lower units.

Typical applications:

- Buffering the outputs of voltage controlled switches (e.g. A-150-1, A-150-8, A-151, A-152). Comment: in case of bidirectional switches it's not possible to integrate the buffers into the switching module because the direction is not known (i.e. which terminal of the switch is working as input and which as output). All electronic switches suffer from a small residual restistance that may cause a small voltage drop without buffering. This may become a problem especially when VCOs are controlled by the switched voltages.
- Buffering of CV interfaces, quantizers, slew limiter, S&H/T&H, sequencer etc. when VCOs are controlled by the CV (provided that the module in question does not feature a buffered output)
- Buffered multiple (similar to A-180-3)
Read more
 1 in stock $47.60
Click for better price!
quote 714707
Cat: 577779 Rel: 14 Jun 19
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
 2 in stock $34.41
Cat: 577786 Rel: 06 Jun 19
 
Multi-connector module - 4HP
Notes: Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very "primitive" they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned. The function of A-180-1 and A-180-2 is the same. The modules differ only in the front panel width.

For the distribution of control voltages used for pitch control of several VCOs the buffered multiple A-185-2 is recommended. This module has a built in buffer (and a lot of additional features like CV summing) that avoids small voltage losses that may be heard in pitch control applications.
Read more
 1 in stock $35.18
2hp
Cat: 635863 Rel: 30 Dec 16
 
2 channel passive attenuator
Notes: Trim is a 2 channel passive attenuator. It features two individual channels of attenuation.
Read more
 1 in stock $38.81
2hp
Cat: 635861 Rel: 30 Dec 16
 
Signal splitter module
Notes: Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.
Read more
 2 in stock $31.04
Items 1 to 36 of 36 on page 1 of 1

Filter

Saved Searches
Save current search
Release Date
Featured
Close