100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 795 on page 1 of 16
1  2  3  ...  16  »
FORTHCOMING
Rakit GO! Portable 2hp USB C Eurorack Power Supply Module Rakit GO! Portable 2hp USB C Eurorack Power Supply Module Rakit GO! Portable 2hp USB C Eurorack Power Supply Module Rakit GO! Portable 2hp USB C Eurorack Power Supply Module Rakit GO! Portable 2hp USB C Eurorack Power Supply Module
Cat: 741657
 
Portable power supply for Eurorack
Notes: The Rakit GO! will take care of your portable eurorack fix. Now you'll be able to take your modules everywhere. What's more, the GO! has a slew of protection features built in, protecting your GO! module, supply/powerbank and greatly reducing the chance of damage to modules through user error. The power supply has a robust and reversible USB C connector for the best possible USB connection. The GO! has been engineered from the ground up, making full use of 5V powerbanks/supplies that are widely available on the market. At only 2hp wide and 27mm deep, GO! is ready to fit in any case.

To start using your GO! power supply you will need a passive bus board and your choice of 5V powerbank or USB AC adapter.

Protection features:

- Supply/Powerbank protection - reverse voltage, overcurrent (fast eFuse)
- GO! Input protection - reverse voltage, overvoltage, undervoltage, overcurrent (fast eFuse)
- Module protection - all rails current limited and overvoltage protected
- +12V & -12V LEDs indicate bus health (very dim below +-11.75V)

What's included:

- GO! Module
- 18W High Quality USB C Cable
- 16 way ribbon cable
- 2 x M3 Screws
- Manual
Read more
coming soon TBA
FORTHCOMING
Befaco Percall Module
Cat: 739916
coming soon TBA
FORTHCOMING
Koma Elektronik Sensor Interface Eurorack Module
coming soon TBA
FORTHCOMING
ERM Polygogo Polygonal Stereo Oscillator Synthesis Module
coming soon TBA
FORTHCOMING
Birdkids Raven Analogue Synthesiser Voice Module
coming soon TBA
FORTHCOMING
Black Corporation Deckard's Voice Module
coming soon TBA
FORTHCOMING
Intellijel Quadrax Module
Cat: 747527
coming soon TBA
FORTHCOMING
Intellijel Qx Quadrax Expander Module
coming soon TBA
FORTHCOMING
Intellijel Tete Module
Cat: 747529
coming soon TBA
FORTHCOMING
Make Noise Tape & Microsound Music Machine Stereo Skiff System
coming soon TBA
Cat: 739116
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


USB socket for charging/powering peripheral devices.

This tiny but handy module connects the USB A connector to the +5V bus on the Intellijel TPS series powered busboards. Allowing 1A or more of current to be supplied to USB devices such as lamps, phone chargers, and usb powered musical devices.

It connects to the bus via supplied two-pin cable.

*Compatible with the TPS30 MAX and TPS80 busboards. TPS30MINI board requires an adapter.
Read more
 1 in stock $15.37
Cat: 602207 Rel: 04 Apr 16
 
USB socket for charging/powering peripheral devices - 2HP wide
Notes: USB socket for charging/powering peripheral devices.

This tiny but handy module connects the USB A connector to the +5V bus on the Intellijel TPS series powered busboards. Allowing 1A or more of current to be supplied to USB devices such as lamps, phone chargers, and usb powered musical devices.

It connects to the bus via supplied two-pin cable.

*Compatible with the TPS30 MAX and TPS80 busboards. TPS30MINI board requires an adapter.
Read more
 8 in stock $18.64
Cat: 738521 Rel: 22 Jul 19
 
4HP PSU connection module
Notes: If you decide to use rack ears to mount Erica Synths 84HP enclosure in the studio rack, you may want to access the PSU connection from the front of the case, instead of the top. The 4HP PSU connection module is the solution. PSU Input module is intended to be used with external PSUs which provide an output voltage from +9V to +12V ("+" in the centre).

For two row Eurorack enclosures (2x84HP), use a small screwdriver to disconnect the existing PSU connector from the blue terminal and connect the PSU connector module as shown on the photo.

For one row Eurorack enclosures (1x84HP), you will need a soldering iron to solder wires from the PSU connector module as shown on the photo. Make sure soldered wires do not touch the aluminium enclosure!
Read more
 2 in stock $19.99
Cat: 673902 Rel: 12 Jan 18
 
1/4" TS jack interface for the Pedal I/O 1U system - 8HP
Notes: The Pedal I/O JACKS 1U Module allows you to patch standard 1/4? TS cables to and from your guitar/instrument pedals.

This module only works when connected to a Pedal I/O 1U module via ribbon cable.
Read more
$23.23 SAVE 10%
 7 in stock $20.91
Cat: 607334 Rel: 04 Apr 16
 
TRS jacks for the Audio I/O interface in 1U module - 16HP wide
Notes: TRS jacks for the Audio I/O interface in 1U.

You need this module for the Audio I/O 1U

This module is not needed if you have the 7U performance case that comes with rear mounted audio i/o jacks.
Read more
 1 in stock $24.84
Cat: 595807 Rel: 19 Jan 16
 
3U rack ears for use as either tabletop or rack mount frame
Notes: The Z-Ears Tabletop are standard 3U rack ears that can be used as either a tabletop frame or standard rack mount frame. These parts are made of anodized aluminium and are custom made to work with Eurorack mounting rails like Z-Rails.
Read more
 1 in stock $24.86
Cat: 719682 Rel: 02 Sep 19
 
Dual NAND, AND, XOR inverter
Notes: The LOGIC module combines two inputs by different logical rules (AND, NAND, XOR). This can be used either for operations on trigger/gate signals (let gate signals pass depending on other signals, invert them depending on the other input etc), or for audio signals, where you get ringmodulator-like sounds when feeding two different oscillator frequencies.
Read more
 1 in stock $25.67
Cat: 686691 Rel: 27 Apr 18
 
Companion board for uploading your samples to Pico Drums
Notes: If you wish to upload your own drum samples to Pico Drum module, you'll need the Pico Drum Programmer. Please refer to the Pico Drum user manual for sample upload instructions via a plug in for the Google Chrome browser.

- 5 pin header connects with the module, USB header connects with the computer
- USB cable is not included
Read more
 1 in stock $25.99
FORTHCOMING
4ms Pod 32 Beta Unpowered Eurorack Module Enclosure Case
coming soon $26.75
Cat: 641111 Rel: 28 Feb 17
 
Micro SD Card with 256 fresh sounds for the One sample player
Notes: PERC features 256 percussion sounds with tight attacks and a bright harmonic spectrum. This collection is specifically focused on shorter percussive samples and includes material such as multi-layer drum & percussion hits, chopped & processed loops, synthesized FM strikes, mallet and bell tones, sampled drum machines, various toms and hand drums, obscure noise boxes, sampled old-school game chips and much more. PERC makes full use of ONE's snappy character.

All samples on the card are available for playback at 48k, 64k and 96k for maximum versatility in pitch control while maintaining latencies of as low as 0.25 ms.

Design by: Glitchmachines
Type: One Shot
Character: Percussive

Only compatible with the Tiptop Audio One Digital Audio Flux Eurorack Module.
Read more
 1 in stock $27.56
Cat: 658619 Rel: 13 Sep 17
 
SD card for the ONE modular synth module
Notes: DOTS features 256 short/dots one shot sounds created specifically for ONE to further extend ZV_K's live Tiptop drum setup. These sounds were selected for their percussive transient response but are also great as monophonic sound sources to use alongside analog synth when sequenced. DOTS are samples of the signature sounds of Buchla, Cwejman, Mutable Instruments, Jomox, Mungo, Industrial Music Electronics (aka The Harvestman), HexInverter, Make Noise, Monomachine, Vermona, Audio Damage. Bastl, Epoch, Mungo, Delptronics as well as some human voice artefacts and even a prepared piano. Each sound was carefully selected from hours of recordings, edited but not altered to retain the original sound's qualities and dynamics and was extensively tested using the module to make sure all the sounds sound good at any setting. DOTS are very easy to fit into a mix, run through effects and are very well suited to be used and abused by a modular system.
Read more
 2 in stock $28.10
Cat: 719678 Rel: 02 Sep 19
 
Audio mixer with 4 inputs
Notes: This module consists of an audio mixer with 4 inputs and their level knobs, plus an additional 4 separate inputs that are mixed at full level (especially for mixing CV signals), and a separate output.
Read more
 1 in stock $28.37
Cat: 719673 Rel: 02 Sep 19
 
Clock divider module
Notes: The BEAT DIVIDER takes a clock signal (the BUS CLK which presents the MIDI clock from the MASTER module) and divides it to musical clock dividers, selectable from 1/2... 1/32.

Additionally, a second output provides the dotted or triplet clock of the selected divider value.
Read more
 1 in stock $28.37
Cat: 719665 Rel: 02 Sep 19
 
Sample & Hold module
Notes: The purpose of the SAMPLE&HOLD module is to "freeze" the input voltage with a trigger input.

Typically used for random CV patterns if a noise signal is fed to the input and triggered e.g. by an LFO.
Read more
 2 in stock $29.72
Cat: 719663 Rel: 02 Sep 19
 
Dual audio & CV level attenuator
Notes: 2ATT/CV contains two units of a simple level attenuator for any kind of signal. You can also switch to voltage mode and get manually controllable CV on the outputs.
Read more
 1 in stock $29.72
Cat: 719694 Rel: 02 Sep 19
 
LFO module
Notes: The LFO module generates modulation voltages mostly below the audio range; this module offers:

- PWM modulation for the Pulse out
- RATE knob for controlling the frequency
- SLOW/FAST switch for two frequency ranges; with FAST the rate can go into the lower audio range
- Triangle/Sawtooth switch; changes the waveform of the output
- PULSEWIDTH knob, this sets the pulsewidth of the according output
- Control LED for sawtooth/triangle and for pulse
- Three separate output signals: Square (even duty cycle), TRIANGLE/Sawtooth, Pulse
Read more
 3 in stock $31.33
Cat: 719668 Rel: 03 Sep 19
 
Dual voltage controlled amplifier module
Notes: 2VCA contains two separate VCA (voltage controlled amplifiers); the classic module to shape the volume of a sound that is fed to IN by a control voltage, e.g. from an ENV to the CV input.

A switch determines the operation mode (DC/CV or audio), choosing the right position can reduce/avoid pop's with short attack envelopes.

An additional knob for each VCA attenuates the level, if necessary.
Read more
 2 in stock $31.33
Cat: 563665 Rel: 11 Mar 15
 
Passive multiple synth module, 2HP wide
Notes: Dual 4-way passive mult (one audio or cv signal in with multiple unbuffered outputs)

On the back of the pcb is a pair of solder points marked as "link". You can connect these (with a solder blob or small jumper wire) to turn the mult into a single 8 channel Mult instead of 2 x 4 channel.
Read more
 5 in stock $31.88
2hp
Cat: 635861 Rel: 30 Dec 16
 
Signal splitter module
Notes: Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.
Read more
 2 in stock $32.41
Cat: 689041 Rel: 19 Jun 18
 
Front panel for the Koma Elektronik Field Kit
Notes: Use this panel to mount your Field Kit in your Eurorack System.

Please note: This only includes the Eurorack Panel, NOT the full Field Kit.
Read more
 2 in stock $32.41
Cat: 683513 Rel: 09 Apr 18
 
Sample library for the Tiptop Audio One by Joseph Fraioli aka Datach'i
Notes: Tiptop Audio and award winning sound designer/electronic music artist Joseph Fraioli AKA Datach'i come together in the form of the new Datach'i One card. The card, to be used exclusively in the Tiptop ONE Sample Player, contains 187 unique sounds ranging from organic recorded elements and electronic percussion to dramatic gestures, ambiences and melodic sequences. Created with field recordings, the Eurorack modular synthesizer, Symbolic Sound Kyma system and boutique electro acoustic instruments, all sounds were recorded at 24 bit/96k quality for maximum resolution in pitch control while maintaining latencies of as low as 0.25 ms.
Read more
 2 in stock $33.07
Cat: 689037 Rel: 19 Jun 18
 
Front panel for the Koma Elektronik Field Kit FX
Notes: Use this panel to mount your Field Kit FX in your Eurorack System.

Please note: This only includes the Eurorack Panel, NOT the full Field Kit FX.
Read more
 2 in stock $33.49
Cat: 719686 Rel: 02 Sep 19
 
Classic wavefolder for the AE system
Notes: This module is based on a design used also by Ken Stone for his CGS system; the original circuit dates back to a publication from 1973.

Basically, the WAVEFOLDER clips and folds the incoming waveform; usually, waveforms with little overtones (like triangle or sinewaves) are used as input. In general, by the clipping and folding, the signal enriches the input signal with more overtones.
Read more
 1 in stock $35.12
Cat: 641958 Rel: 28 Feb 17
 
2HP splitter module for stereo signals into mono
Notes: Quantic Fictus is a simple 2HP splitter for stereo signals into mono. It was built specifically to interface with the Keith McMillan Qu-Nexus but can be used for any sort of stereo interfacing. It is passive so can also be used to combine mono signals into stereo.

Size: 2HP Eurorack
Depth: 1 Inch
Power: None
Read more
 1 in stock $36.20
Cat: 577779 Rel: 14 Jun 19
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
 1 in stock $36.27
Cat: 719689 Rel: 02 Sep 19
 
Versatile mixer/quadattenuator
Notes: 4ATTMIX offers four input channels which can be level controlled / attenuated by the corresponding knobs. The attenuated signals are sent to four outputs.

Additionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.

An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.
Read more
 2 in stock $36.73
Cat: 557508 Rel: 19 Dec 14
 
Multiple signal sending module
Notes: The Multiple is a simple but important module that allows for sending a signal to multiple destinations. Within the Make Noise system the Multiple may also be used for combining clock, gate and pulse signals together to create interesting timing sources (in other words, it acts as a Gate combiner aka logic OR circuit).

It has 9 inter-connected sockets that may be split into different group combinations depending upon how it is patched. The jacks circled in white will make or break the interconnects between the 3 groups of three, thus allowing for three 3-way, one 5-way/ one 3-way or one 7-way multiple.

The Multiple is passive, because the Make Noise system does not require Buffered Multiples since all critical control signals are already buffered in such a way as to provide a large fan-out capability.
Read more
 2 in stock $37.28
Cat: 595820 Rel: 03 Aug 16
 
Links up to 3 Zeus Studio Bus boards with an external power supply - 4HP wide
Notes: Zeus Access provides a simple, fast, and cost-effective solution for linking up to three Zeus Studio Bus boards with an external Cincon-TTA brick-style power supply. It is a tethered 4HP space-saving front panel with a long lasting high power rating On/Off switch and power socket.

It comes fully assembled and wired with 16AWG wire and plated copper terminals leads that require no additional assembly or special tools for connecting to a Zeus Studio Bus board.
Read more
 1 in stock $37.28
Cat: 577786 Rel: 06 Jun 19
 
Multi-connector module - 4HP
Notes: Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very "primitive" they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned. The function of A-180-1 and A-180-2 is the same. The modules differ only in the front panel width.

For the distribution of control voltages used for pitch control of several VCOs the buffered multiple A-185-2 is recommended. This module has a built in buffer (and a lot of additional features like CV summing) that avoids small voltage losses that may be heard in pitch control applications.
Read more
 1 in stock $37.35
Cat: 719658 Rel: 02 Sep 19
 
Stereo headphone amplifier
Notes: A stereo headphone amplifier for AE modular.

It has separate left/right inputs; via a switch it can be set to mono operation (only left input is used). One common volume control for both outputs.

Two headphones can be attached via 3.5mm stereo minijack sockets.
Read more
 2 in stock $37.81
Cat: 719656 Rel: 03 Sep 19
 
State variable filter
Notes: This module is a classic state variable filter.

It offers the control knobs cut-off frequency, resonance and CV attenuator; two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter, this module has a significant self-resonance, and also a very quick response to cut-off frequency changes.

Three different outputs provide lowpass, bandpass and high-pass output.
Read more
 1 in stock $37.81
Cat: 719661 Rel: 02 Sep 19
 
Binary divider for incoming signals
Notes: A binary divider for incoming signals. It can be used either for dividing clock signals (e.g. from an LFO, BEATDIVIDER) by 2 / 4 / 8... 128 for rhythmical purposes but also for audio signals - in this case you get subharmonics/lower octaves squarewaves at the outputs, which can be mixed or used separately.

The reset input resets all output signals; in case of audio signals this can get quite unique, ringmodulator-like sounds.
Read more
 2 in stock $37.81
Cat: 719685 Rel: 02 Sep 19
 
Lowpass gate module for AE modular
Notes: The LOPAG is the lowpass gate module for AE. It is based on a Vactrol (like all good lowpass gates) and has two inputs: IN (audio signal) and TRIG. A pulse on the TRIG input opens the signal path shortly and via the characteristics of the Vactrol the audio signal is filtered and attenuated in a plucked, percussive way. Additional GATE and CV inputs allow more control over the way the module works.
Read more
 2 in stock $38.09
FORTHCOMING
Doepfer A-180-2v Multiples Module (vintage edition) Doepfer A-180-2v Multiples Module (vintage edition) Doepfer A-180-2v Multiples Module (vintage edition)
Cat: 751717
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
coming soon $38.36
Cat: 719657 Rel: 02 Sep 19
 
Filter module
Notes: This filter module is a variant of the Wasp filter, a quite strange circuit used first in the EDP Wasp synth end of the seventies, which abuses digital chips in an analogue way leading to the characteristic sound of this filter type. In this module, vactrols are used for controlling the filter frequency.
Read more
 2 in stock $38.89
Cat: 719659 Rel: 02 Sep 19
 
Mono delay module
Notes: This module is a standard mono delay with the usual parameters:

- Delay time
- Feedback
- Dry/wet mix

It sounds not as clean and polished as a usual digital delay but has quite a character on its own. High feedback settings allow endless and distorting loops.

(For the techies: It is based on the well-known PT2399 chip.)
Read more
 1 in stock $39.44
Cat: 719687 Rel: 02 Sep 19
 
4 minijack inputs/outputs
Notes: 4I/O offers four minijack sockets that are connected to the AE sockets for connecting external audio sources, CV's and Eurorack modules. Sockets 1 and 3 are stereo sockets; if a stereo cable is inserted here the signal is available on sockets 1/2 and 3/4. With mono cables the four sockets can be used independently.

All sockets have an overvoltage protection (as AE modular is limited to 5V) and can be switched between audio and DC/CV signals.
Read more
 2 in stock $39.44
Cat: 719693 Rel: 02 Sep 19
 
Classic VCO for AE modular
Notes: The VCO module is a "classic" VCO featuring:

- Two CV inputs 1V/octave
- MODulation input with Level-knob, switchable to frequency or pulsewidth
- PWM input
- Coarse/Fine knob for frequency
- Pulsewidth knob for squarewave
- Square/Triangle/Sawtooth output

The module works well if you need an oscillator for primary musical/melodic use.
Read more
 1 in stock $39.97
Cat: 714698 Rel: 19 Dec 18
 
Self-powered white noise generator
Notes: This cable expands every synth without a noise generator but an external audio input and a 5V source at the tip of a socket (e.g. an expression pedal input) and gives you digital noise. Initially the cable has been developed as an expansion for the Moog products Little Phatty and Minitaur but it works also with other synths etc. The Hirlostek needs to be provided with a 5V voltage, for instance at the tip of a expression pedal socket. A circuit inside of the bigger plug generates a bright digital noise you can use as audio or modulation source. The narrower plug carries the noise signal and is to be connected either with an audio input or a CV input. Hand made, military quality due to good Neutrik jacks.
Read more
 2 in stock $39.97
FORTHCOMING
Doepfer A-183-1 Dual Attenuator Module Doepfer A-183-1 Dual Attenuator Module Doepfer A-183-1 Dual Attenuator Module
Cat: 751728
 
Dual passive attenuator - 4HP
Notes: Module A-183-1 is a simple passive dual attenuator. Passive means, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts like amplifiers or buffers and no power supply is required.

This is how the A-183-1 works: At the output socket appears the attenuated input signal, i.e. zero level at the fully CCW position and max. level and the fully CW position.

Applications:

Adjustable level of CV or audio signals to control other modules that do not have attenuators (e.g. Dual VCA A-132-1, Quantizer A-156, CV-to-Midi interface A-192 and modules of other manufacturers).
Read more
coming soon $39.98
Items 1 to 50 of 795 on page 1 of 16
1  2  3  ...  16  »

Filter

Saved Searches
Save current search
Release Date
Close