100% Secure Shopping
Studio equipment
Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.
100% Secure Shopping
DJ equipment
Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ
Filter
Coming Soon
Equipment
Format
Release Date
900
Not Forthcoming
81
Forthcoming
4
Last Week
7
Last 2 Weeks
18
Last Month
49
Last 2 Months
169
Last 6 Months
256
Last Year
Brand
Featured
Price
Tags
Options
Sort
Date
Date
- Relevance:
- Most relevant
- Bestseller:
- High to low
- Artist:
- A to Z
- Z to A
- Title:
- A to Z
- Z to A
- Label:
- A to Z
- Z to A
- Date:
- Old to new
- New to old
- Price:
- Low to high
- High to low
FORTHCOMING
Related products...
CubuSynth ADSR VC Looping Envelope Generator Module (envelope generator module)
Cat: 1006105 Rel: 30 Jun 24
Voltage controlled looping envelope generator module - 10HP
Notes: The CubuSynth ADSR Module is a VC looping envelope generator, with controls for the Attack, Decay, Sustain and Release stages, for overall Time of the envelope and CV inputs for Time and Level.
The EnvGen8 chip was written/designed by Tom Wiltshire aka "Electric Druid".
1 ATTACK (1ms - 10s)
Sets the time, the Envelope takes to reach full level from the moment a gate is detected (Key is pressed)
2 DECAY (1ms - 10s)
Sets the time, after the envelope hits full level, to fade to the level set by the SUSTAIN Knob.
3 SUSTAIN (0% - 100%)
Sets the Volume to stay after the decay, while the GATE input is high.
4 RELEASE (1ms - 10s)
Sets the time for the fade out on falling edge of the GATE input (after the Key is released)
5 MODE switch
Select between exponential and linear curves.
6 PUNCH switch
Adds extra thump to very short percussive envelopes
7 LOOPING MODE switch
Allows selection between three different modes of operation. Gated mode is a normal envelope. Gated Looping will
trigger the ATTACK stage when the GATE goes high, then continue looping whilst the GATE remains high, and will
RELEASE to zero when the GATE goes low. The LFO Looping mode loops continuously and ignores input from the
GATE.
8 TIME (x1 - x100)
Overall Time control which shortens the length of the entire envelope.
9 TIME CV Attenuator
Attenuates incoming CV for Time modulation. Higher voltages will shorten the
length of the envelope.
10 TRIG Input
Re-trigger for the envelope. Useful for Polyphonic patches. Envelope goes to
ATTACK stage on rising edge of 0-5V pulse while Gate can still be on.
11 GATE Input
Normalized to TRIG Input. Envelope goes to RELEASE stage on the falling edge.
12 Level CV Input
Control the overall Volume of the envelope. Can be used for velocity control.
If nothing is plugged in, the Volume stays on max.
13 OUT
CV-output of the envelope (0 to +5V)
14 LED
Indicates the output voltage.
15 TIME CV
CV Input for Time modulation. Higher voltages will shorten the length of the
envelope.
16 INV. OUT
Inverted voltage of the output CV (0 to -5V)
Dimensions
10 HP
25 mm deep
Current Draw
16 mA +12V
16 mA -12V
7 mA 5V
… Read moreThe EnvGen8 chip was written/designed by Tom Wiltshire aka "Electric Druid".
1 ATTACK (1ms - 10s)
Sets the time, the Envelope takes to reach full level from the moment a gate is detected (Key is pressed)
2 DECAY (1ms - 10s)
Sets the time, after the envelope hits full level, to fade to the level set by the SUSTAIN Knob.
3 SUSTAIN (0% - 100%)
Sets the Volume to stay after the decay, while the GATE input is high.
4 RELEASE (1ms - 10s)
Sets the time for the fade out on falling edge of the GATE input (after the Key is released)
5 MODE switch
Select between exponential and linear curves.
6 PUNCH switch
Adds extra thump to very short percussive envelopes
7 LOOPING MODE switch
Allows selection between three different modes of operation. Gated mode is a normal envelope. Gated Looping will
trigger the ATTACK stage when the GATE goes high, then continue looping whilst the GATE remains high, and will
RELEASE to zero when the GATE goes low. The LFO Looping mode loops continuously and ignores input from the
GATE.
8 TIME (x1 - x100)
Overall Time control which shortens the length of the entire envelope.
9 TIME CV Attenuator
Attenuates incoming CV for Time modulation. Higher voltages will shorten the
length of the envelope.
10 TRIG Input
Re-trigger for the envelope. Useful for Polyphonic patches. Envelope goes to
ATTACK stage on rising edge of 0-5V pulse while Gate can still be on.
11 GATE Input
Normalized to TRIG Input. Envelope goes to RELEASE stage on the falling edge.
12 Level CV Input
Control the overall Volume of the envelope. Can be used for velocity control.
If nothing is plugged in, the Volume stays on max.
13 OUT
CV-output of the envelope (0 to +5V)
14 LED
Indicates the output voltage.
15 TIME CV
CV Input for Time modulation. Higher voltages will shorten the length of the
envelope.
16 INV. OUT
Inverted voltage of the output CV (0 to -5V)
Dimensions
10 HP
25 mm deep
Current Draw
16 mA +12V
16 mA -12V
7 mA 5V
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 30 Jun 24 $108.88
(No payment required now - pay when released)
FORTHCOMING
Related products...
CubuSynth Dual Vintage VCA Dual Audio Controlled Voltage Amplifier Module (VCA/dual/stereo module)
Cat: 1006109 Rel: 30 Jun 24
Dual audio controlled voltage amplifier module - 8HP
Notes: The CubuSynth Dual Vintage VCA is a nice sounding, zero bleed, analog Voltage controlled amplifier based on the LM13700 Dual OTA. It can work as two independent VCAs or as a stereo unit, and CV input 1 on channel 1 is normalized to the CV input 1 on channel 2. (same signal can control both Channels).
The Original concept is designed by Tom Wiltshire aka "Electric Druid". For more information visit:
https://electricdruid.net/design-a-eurorack-vintage-vca-with-the-lm13700/
1 LEVEL
Sets the Amplitude for each channel.
2 CV AMOUNT
Attenuates the Control voltage from CV input (3)
3 CV
CV input for the amplitude Modulation. The input on channel 2 is
normalized from CV on channel 1 when nothing is plugged in.
4 CV2
A second CV input for amplitude modulation, without attenuator
5 IN
Input for Audio Signal
6 OUT
Output for the Audio Signal
Dimensions
8 HP
25 mm deep
Current Draw
9 mA +12V
9 mA -12V
… Read moreThe Original concept is designed by Tom Wiltshire aka "Electric Druid". For more information visit:
https://electricdruid.net/design-a-eurorack-vintage-vca-with-the-lm13700/
1 LEVEL
Sets the Amplitude for each channel.
2 CV AMOUNT
Attenuates the Control voltage from CV input (3)
3 CV
CV input for the amplitude Modulation. The input on channel 2 is
normalized from CV on channel 1 when nothing is plugged in.
4 CV2
A second CV input for amplitude modulation, without attenuator
5 IN
Input for Audio Signal
6 OUT
Output for the Audio Signal
Dimensions
8 HP
25 mm deep
Current Draw
9 mA +12V
9 mA -12V
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 30 Jun 24 $88.13
(No payment required now - pay when released)
FORTHCOMING
Related products...
CubuSynth 6xLevel Passive Attenuator & Multiple Module (attenuator/multiple module)
Cat: 1006112 Rel: 30 Jun 24
Passive attenuator & multiple module - 8HP
Notes: The CubuSynth 6xLevel module is a 8hp passive Attenuator, which allows scaling of CV and audio signals. The inputs are normalized from the outputs above, which allows passive multiplication with attenuation. The normalized path is attenuated by the potentiometer before, so you can also create very subtle changes (e.g. Fine tune a VCO).
The white lines on the Front panel mark the normalisation routing.
Dimensions
8 HP
12 mm deep
Current Draw
Module does not draw current
… Read moreThe white lines on the Front panel mark the normalisation routing.
Dimensions
8 HP
12 mm deep
Current Draw
Module does not draw current
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 30 Jun 24 $57.03
(No payment required now - pay when released)
FORTHCOMING
Related products...
CubuSynth VCLFO v2 Complex Digital LFO Module With 16 Waveforms (LFO/random/sample & hold module)
Cat: 1006115 Rel: 30 Jun 24
Complex digital LFO module with 16 waveforms & CV control over everything - 10HP
Notes: The CubuSynth VCLFO v2 is a Complex voltage controlled Low frequency oscillator, with 16 Waveforms, Step control (Sample&Hold style), LFO Sync / Reset, CV control over Frequency, Amplitude, Waveform, Frequency multiplier, Skew and Step Rate.
16 Waveforms selectable in two Banks of 8
Frequency range: 0.05Hz to 12.8Hz (102.4Hz with multiplier x8)
6 CV inputs for Multiplier, Frequency, Step Rate, Skew, Waveform and Level
"Sync" Input for LFO reset, or Step Sync
3 outputs:
Uni-Polar (0 to +5V),
Bi-Polar inverted (+5V to 5V / 10Vpp) and
Bi-Polar normal ( 5V to +5V / 10Vpp)
Size: 10 HP / 50 mm
Depth: 2 4 mm (measured from the front panel)
Current Draw:
+12V: +40 mA
-12V: -30 mA
single SMD PCB design
… Read more16 Waveforms selectable in two Banks of 8
Frequency range: 0.05Hz to 12.8Hz (102.4Hz with multiplier x8)
6 CV inputs for Multiplier, Frequency, Step Rate, Skew, Waveform and Level
"Sync" Input for LFO reset, or Step Sync
3 outputs:
Uni-Polar (0 to +5V),
Bi-Polar inverted (+5V to 5V / 10Vpp) and
Bi-Polar normal ( 5V to +5V / 10Vpp)
Size: 10 HP / 50 mm
Depth: 2 4 mm (measured from the front panel)
Current Draw:
+12V: +40 mA
-12V: -30 mA
single SMD PCB design
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 30 Jun 24 $171.09
(No payment required now - pay when released)
FORTHCOMING
Related products...
ADDAC System ADDAC813 Stereo Mixer+ Module (dual/stereo/mixer module)
Cat: 1007268 Rel: 30 Jun 24
4-channel stereo mixer module - 8HP
Notes: ADDAC813 is a straight forward stereo mixer. Featuring 5 stereo channels, 4 of them with attenuators, a mono send/return path for parallel processing plus stereo and mono outputs
Four channels with stereo input and gain knob. Fifth channel with stereo input without gain knob, which are the prefered inputs to cascade several ADDAC813s when more channels are needed. Master Output controls the level of the Inputs mix. Two LEDs monitor the inputs mix.
Mono Send / Return return path allows for easy integration of mono effects in a stereo chain. Plug your favorite module through it (filter, bbd delay, spring reverb...) or any mono pedal.
The Return Gain works in parallel with the Master Output, just like regular wet / dry controls.
The send output can be configured to be line or synth level via a jumper in the back.
Stereo output sums the Inputs Mix with the Return signal.
The Mono output is the sum of Left and Right outputs
Effect Pedals
Using the send output at Line level, the user can connect the send output directly into mono effect pedals and have the pedals output connected directly into the return input without the need of an attenuator/amplifier module.
Tech Specs:
8HP
4 cm deep
50mA +12V
50mA -12V
… Read moreFour channels with stereo input and gain knob. Fifth channel with stereo input without gain knob, which are the prefered inputs to cascade several ADDAC813s when more channels are needed. Master Output controls the level of the Inputs mix. Two LEDs monitor the inputs mix.
Mono Send / Return return path allows for easy integration of mono effects in a stereo chain. Plug your favorite module through it (filter, bbd delay, spring reverb...) or any mono pedal.
The Return Gain works in parallel with the Master Output, just like regular wet / dry controls.
The send output can be configured to be line or synth level via a jumper in the back.
Stereo output sums the Inputs Mix with the Return signal.
The Mono output is the sum of Left and Right outputs
Effect Pedals
Using the send output at Line level, the user can connect the send output directly into mono effect pedals and have the pedals output connected directly into the return input without the need of an attenuator/amplifier module.
Tech Specs:
8HP
4 cm deep
50mA +12V
50mA -12V
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 30 Jun 24 $169.01
(No payment required now - pay when released)
FORTHCOMING
Related products...
Rides In The Storm SED-SCM Discrete Voltage Controlled Oscillator Module (envelope generator/external/filter/LFO/noise/oscillator/synth voice/VCA module)
Cat: 942310 Rel: 31 May 24
Discrete VCOs module in 36HP.
Notes: Discrete VCOs with three Subs, SYNC, Wavefolder, discrete VCA and VCF, Dual analog LFO (one also usable as VCO) into audio rate with Keytracking, huge Mixer section, Ring mod, Glide and Patchfield.
Power consumption: TBA
Rackspace: 36HP
… Read morePower consumption: TBA
Rackspace: 36HP
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 31 May 24 $517.42
(No payment required now - pay when released)
FORTHCOMING
Related products...
Feedback VCZIII A Base Voltage Controlled Oscillator Module (oscillator/waveshaper module)
Cat: 1004975 Rel: 31 May 24
Voltage controlled oscillator module - 12HP
Notes: The VCZIII voltage controlled oscillator modules are Feedback's latest creation and are based on the VCOs of one of the most revered analog instruments, the famous British pin matrix synth released in 1969.
The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.
There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.
Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.
THIS VERSION IS WITH NORMAL FINE TUNE POTENTIOMETER.
Tech specs:
- 12HP width
- 35mm depth behind front panel including the power connector
- standard 10 pin euro power +12V / -12V
- power consumption +12V 50mA , -12V 30mA
… Read moreThe VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.
There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.
Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.
THIS VERSION IS WITH NORMAL FINE TUNE POTENTIOMETER.
Tech specs:
- 12HP width
- 35mm depth behind front panel including the power connector
- standard 10 pin euro power +12V / -12V
- power consumption +12V 50mA , -12V 30mA
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 31 May 24 $181.46
(No payment required now - pay when released)
FORTHCOMING
Related products...
Feedback LFO100 Complex Analogue Low Frequency Oscillator Module (CV modulation/LFO/utility module)
Cat: 1004979 Rel: 31 May 24
Analogue low frequency oscillator module - 10HP
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 31 May 24 $102.65
(No payment required now - pay when released)
FORTHCOMING
Related products...
Feedback VCZIII A VCO Premium Voltage Controlled Oscillator Module (oscillator/waveshaper module)
Cat: 1004970 Rel: 31 May 24
Voltage controlled oscillator module - 12HP
Notes: The VCZIII voltage controlled oscillator modules are Feedback's latest creation and are based on the VCOs of one of the most revered analogue instruments, the famous British pin matrix synth released in 1969.
The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.
There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.
Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.
THIS VERSION IS WITH BOURNS MULTITURN FINE TUNE POTENTIOMETER.
Tech specs:
- 12HP width
- 35mm depth behind front panel including the power connector
- standard 10 pin euro power +12V / -12V
- power consumption +12V 50mA , -12V 30mA
… Read moreThe VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.
There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.
Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.
THIS VERSION IS WITH BOURNS MULTITURN FINE TUNE POTENTIOMETER.
Tech specs:
- 12HP width
- 35mm depth behind front panel including the power connector
- standard 10 pin euro power +12V / -12V
- power consumption +12V 50mA , -12V 30mA
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 31 May 24 $216.72
(No payment required now - pay when released)
FORTHCOMING
Related products...
Feedback VCZIII B Premium Voltage Controlled Oscillator Module (oscillator/waveshaper module)
Cat: 1004971 Rel: 31 May 24
Voltage controlled oscillator module - 12HP
Notes: The VCZIII voltage controlled oscillator modules are our latest creation and are based on the VCOs of one of the most revered analogue instruments, the famous British pin matrix synth released in 1969.
The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.
There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.
Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.
THIS VERSION IS WITH BOURNS MULTITURN FINE TUNE POTENTIOMETER.
Tech specs:
- 12HP width
- 35mm depth behind front panel including the power connector
- standard 10 pin euro power +12V / -12V
- power consumption +12V 50mA , -12V 30mA
… Read moreThe VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.
There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.
Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.
THIS VERSION IS WITH BOURNS MULTITURN FINE TUNE POTENTIOMETER.
Tech specs:
- 12HP width
- 35mm depth behind front panel including the power connector
- standard 10 pin euro power +12V / -12V
- power consumption +12V 50mA , -12V 30mA
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 31 May 24 $216.72
(No payment required now - pay when released)
FORTHCOMING
Related products...
Winterbloom Neptune Resonant Diode Ladder Filter Module (filter module)
Cat: 1000562 Rel: 31 May 24
Resonant diode ladder filter module - 12HP
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 31 May 24 $216.72
(No payment required now - pay when released)
FORTHCOMING
Related products...
Eowave Portail MIDI To CV Interface Module (MIDI module)
Cat: 1004707 Rel: 31 May 24
MIDI to CV interface module - 5HP
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 31 May 24 $175.23
(No payment required now - pay when released)
FORTHCOMING
Related products...
Feedback VCZIII B Base Voltage Controlled Oscillator Module (oscillator/waveshaper module)
Cat: 1004977 Rel: 31 May 24
Voltage controlled oscillator module - 12HP
Notes: The VCZIII voltage controlled oscillator modules are Feedback's latest creation and are based on the VCOs of one of the most revered analog instruments, the famous British pin matrix synth released in 1969.
The VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.
There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.
Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.
THIS VERSION IS WITH NORMAL FINE TUNE POTENTIOMETER.
Tech specs:
- 12HP width
- 35mm depth behind front panel including the power connector
- standard 10 pin euro power +12V / -12V
- power consumption +12V 50mA , -12V 30mA
… Read moreThe VCZIII series VCO is a result of the collaboration of Feedback modules and CMS-LAB and is a modern re-creation of those temperamental, organic and beautiful sounding VCOs from 1969 but with enhancements and adaptations to the Eurorack needs of 21st century.
There are two type of VCOs, VCZIII A based on VCO1 with variable shape SINE & SAW waveforms, VCZIII B based on VCO2 & VCO3 with variable TRIANGLE & PULSE waveforms.
Also, each VCO comes in two versions, one with normal fine tune potentiometers and one with precision multiturn potentiometer.
THIS VERSION IS WITH NORMAL FINE TUNE POTENTIOMETER.
Tech specs:
- 12HP width
- 35mm depth behind front panel including the power connector
- standard 10 pin euro power +12V / -12V
- power consumption +12V 50mA , -12V 30mA
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 31 May 24 $181.46
(No payment required now - pay when released)
FORTHCOMING
Related products...
Anti-Kulture Precision Disrupter Generative Sequencer Module (sequencer/random module)
Cat: 1005099 Rel: 31 May 24
Generative sequencer module - 40HP
Notes: The Precision Disrupter is a generative Eurorack sequencer that relies on controlled randomization to create melodic & rhythmic patterns with ease and relentless conviction.
The idea
Unlike other generative sequencers in euorack, the Precision Disrupter
offers complete command over the randomization parameters and then immediately empowers you with fine-editing controls for precise, real-time performance punch.
The bottom line
The Precision Disrupter is a melody generating powerhouse. Quickly find the the perfect sequence, breathe in the inspiration, and show them what you are made of.
Width: 40HP
Max Depth: 25mm
200mA @ +12V 5mA @ -12V
… Read moreThe idea
Unlike other generative sequencers in euorack, the Precision Disrupter
offers complete command over the randomization parameters and then immediately empowers you with fine-editing controls for precise, real-time performance punch.
The bottom line
The Precision Disrupter is a melody generating powerhouse. Quickly find the the perfect sequence, breathe in the inspiration, and show them what you are made of.
Width: 40HP
Max Depth: 25mm
200mA @ +12V 5mA @ -12V
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 31 May 24 $540.24
(No payment required now - pay when released)
FORTHCOMING
Related products...
ADDAC System ADDAC309 CV To Expression Module (attenuator/controller/CV modulation/effect/expression/external/utility module)
Cat: 992144 Rel: 30 Apr 24
CV to expression module - 4HP
Notes: ADDAC309 CV to Expression allows a simple and straight forward connection between modular and effect pedals that features expression pedal TRS inputs.
Instead of using an expression pedal into the effects pedal the user can use this module in between a CV source and the Effects pedal to be controlled.
This is a great way to control the available parameters on the effects pedals straight from a CV source.
ADDAC309 features 2 channels each with a CV Input with attenuator and a 1/4" jack output.
This is a passive module, the power needed for operation is taken from the pedal power instead of the modular frame, this allows for perfect matching of the pedal's operating voltage which can range from 3.3v to 9v.
Tech Specs:
4HP
3,5cm deep
Passive module
… Read moreInstead of using an expression pedal into the effects pedal the user can use this module in between a CV source and the Effects pedal to be controlled.
This is a great way to control the available parameters on the effects pedals straight from a CV source.
ADDAC309 features 2 channels each with a CV Input with attenuator and a 1/4" jack output.
This is a passive module, the power needed for operation is taken from the pedal power instead of the modular frame, this allows for perfect matching of the pedal's operating voltage which can range from 3.3v to 9v.
Tech Specs:
4HP
3,5cm deep
Passive module
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 30 Apr 24 $64.29
(No payment required now - pay when released)
FORTHCOMING
Related products...
ADDAC System ADDAC508 Swell Physics Module (CV modulation/quad module)
Cat: 993830 Rel: 30 Apr 24
A CV generator based on the simulation of a physical system, ocean swells
Notes: Following ADDAC's ADDC503 Marble Physics here is a new simulation of a physical system. This time, imagine a small area in the middle of the ocean, in this area we place 4 equally spaced buoys anchored to the bottom in such a system that we can control the spacing between the buoys. Imagine we can control the elements and agitate the waters at will which in turn will make the buoys move up and down as the water surface moves.
Finally imagine the buoys would wirelessly transmit their absolute height directly to your module outputs where they would be mapped to a voltage signal.
ADDAC use a Gerstner Wave as the motor behind the two-dimensional wave generation. In fluid dynamics a Gerstner Wave is described as "a progressive wave of permanent form on the surface of an incompressible fluid of infinite depth". Gerstner waves are often used in computer graphics to simulate any type of water surface, if you've seen any animation film or computer game with water surfaces in it most probably it features a Gerstner wave generating it.
Tech Specs:
10HP
4.5cm deep
70mA +12V
40mA -12V
… Read moreFinally imagine the buoys would wirelessly transmit their absolute height directly to your module outputs where they would be mapped to a voltage signal.
ADDAC use a Gerstner Wave as the motor behind the two-dimensional wave generation. In fluid dynamics a Gerstner Wave is described as "a progressive wave of permanent form on the surface of an incompressible fluid of infinite depth". Gerstner waves are often used in computer graphics to simulate any type of water surface, if you've seen any animation film or computer game with water surfaces in it most probably it features a Gerstner wave generating it.
Tech Specs:
10HP
4.5cm deep
70mA +12V
40mA -12V
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 30 Apr 24 $341.15
(No payment required now - pay when released)
FORTHCOMING
Related products...
Cosmotronic Messor Stereo Compressor & Transient Shaper Module (silver) (dynamics/dual/stereo/envelope follower/expander/VCA module)
Cat: 995681 Rel: 30 Apr 24
Stereo compressor & transient shaper module - 8HP
Notes: Messor is an analogue stereo compressor with lots of tricks up its sleeve, in only 8HP.
From squashing drums, sidechaining kicks and sculpting transients, to glueing a mix together, it's a very versatile dynamics manager.
At its core it's a VCA based feed-forward compressor with a low noise signal path. The magic is in the internal sidechain that shapes the gain reduction envelope. This starts with a a switchable high-pass / low-pass filter, before going into a precision envelope follower, controlled by familiar parameters: the attack, release, threshold, ratio and makeup gain.
The ratio can go past limiting and into over-compression, which can completely reshape transients, a great tool for sound design.
Being modular, of course there are CV inputs for Attack, Release and the side-chain Filter cutoff. The Gain CV controls the makeup gain, but also doubles as a Stereo VCA with the Gain knob turned fully CCW.
The gain reduction envelope is also available as an output, for turning filters or other VCA's into compressors for example, or as a standalone envelope follower.
There's a bypass switch, and a Warm mode, that can bring in a bit of additional saturation and compression in the form of analog tube simulation circuitry.
Lastly there's the possibility to insert an external sidechain, for that classic kick sidechain compression.
Dimensions
8 HP
25 mm deep
Current Draw
45 mA +12V
26 mA -12V
… Read moreFrom squashing drums, sidechaining kicks and sculpting transients, to glueing a mix together, it's a very versatile dynamics manager.
At its core it's a VCA based feed-forward compressor with a low noise signal path. The magic is in the internal sidechain that shapes the gain reduction envelope. This starts with a a switchable high-pass / low-pass filter, before going into a precision envelope follower, controlled by familiar parameters: the attack, release, threshold, ratio and makeup gain.
The ratio can go past limiting and into over-compression, which can completely reshape transients, a great tool for sound design.
Being modular, of course there are CV inputs for Attack, Release and the side-chain Filter cutoff. The Gain CV controls the makeup gain, but also doubles as a Stereo VCA with the Gain knob turned fully CCW.
The gain reduction envelope is also available as an output, for turning filters or other VCA's into compressors for example, or as a standalone envelope follower.
There's a bypass switch, and a Warm mode, that can bring in a bit of additional saturation and compression in the form of analog tube simulation circuitry.
Lastly there's the possibility to insert an external sidechain, for that classic kick sidechain compression.
Dimensions
8 HP
25 mm deep
Current Draw
45 mA +12V
26 mA -12V
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 30 Apr 24 $212.56
(No payment required now - pay when released)
FORTHCOMING
Related products...
Rides In The Storm BOC Discrete Analogue Oscillator Module (oscillator/frequency divider/ring modulator/waveshaper module)
Cat: 1000348 Rel: 30 Apr 24
Discrete voltage controlled oscillator module - 12HP
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.est. release 30 Apr 24 $176.27
(No payment required now - pay when released)
People also bought...
Laine Winnows 1U Dual VC Resonator Module (black) (resonator/dual/stereo/filter/oscillator module)
Cat: 1008011 Rel: 17 Apr 24
Dual voltage controlled resonator 1U module - 24HP
Notes: Winnows, a dual VC resonant filter with damping.
Winnows brings radical resonant filtering to the 1U row. Make your basslines growl like it's 1999. Create clean resonant tones and layers, tuned percussion, steep filtered peaks, vowel filters and more. Each filter channel comprises two state variable filter cores, the first producing a 2-Pole band-pass response, with resonance and self-oscillation amounts set by a 3-Pole feedback network. Signals are then routed through a 1-Pole low-pass damping stage to remove harshness if required. This can be routed to the channel output, or switched and routed through a second series of resonant SVF and 1-Pole LPF damping stages. This circuitry is identical per channel.
Features and uses
Steep and spiked or wide and smooth, resonant bandpass filters
Zone in on and reinforce a sound's dominant frequency, create overtones using both channels
Create sharp resonant peaks, dull or remove any harshness with VC damping
Use the resonator as a sound source by shaping and triggering tuned percussion tones or kick drums
Per channel: 2 x VCA based SVF, 2 x 1-pole damping LPF, 1 x 3-Pole resonance core
Identical circuitry per channel, CV and audio jacks are normalled between channels
Combine both channels in series for vowel filter responses and creative filtering
Specifications
Intellijel 1U format
Width 24 HP
Depth 34mm
Power requirements ~90mA +12V/~80mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K
… Read moreWinnows brings radical resonant filtering to the 1U row. Make your basslines growl like it's 1999. Create clean resonant tones and layers, tuned percussion, steep filtered peaks, vowel filters and more. Each filter channel comprises two state variable filter cores, the first producing a 2-Pole band-pass response, with resonance and self-oscillation amounts set by a 3-Pole feedback network. Signals are then routed through a 1-Pole low-pass damping stage to remove harshness if required. This can be routed to the channel output, or switched and routed through a second series of resonant SVF and 1-Pole LPF damping stages. This circuitry is identical per channel.
Features and uses
Steep and spiked or wide and smooth, resonant bandpass filters
Zone in on and reinforce a sound's dominant frequency, create overtones using both channels
Create sharp resonant peaks, dull or remove any harshness with VC damping
Use the resonator as a sound source by shaping and triggering tuned percussion tones or kick drums
Per channel: 2 x VCA based SVF, 2 x 1-pole damping LPF, 1 x 3-Pole resonance core
Identical circuitry per channel, CV and audio jacks are normalled between channels
Combine both channels in series for vowel filter responses and creative filtering
Specifications
Intellijel 1U format
Width 24 HP
Depth 34mm
Power requirements ~90mA +12V/~80mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K
1 in stock $192.34
Click for better price!
or call +44 20 7424 1960
quote 1008011
quote 1008011
People also bought...
Laine Winnows 1U Dual VC Resonator Module (silver) (resonator/dual/stereo/filter/oscillator module)
Cat: 1008005 Rel: 17 Apr 24
Dual voltage controlled resonator 1U module - 24HP
Notes: Winnows, a dual VC resonant filter with damping.
Winnows brings radical resonant filtering to the 1U row. Make your basslines growl like it's 1999. Create clean resonant tones and layers, tuned percussion, steep filtered peaks, vowel filters and more. Each filter channel comprises two state variable filter cores, the first producing a 2-Pole band-pass response, with resonance and self-oscillation amounts set by a 3-Pole feedback network. Signals are then routed through a 1-Pole low-pass damping stage to remove harshness if required. This can be routed to the channel output, or switched and routed through a second series of resonant SVF and 1-Pole LPF damping stages. This circuitry is identical per channel.
Features and uses
Steep and spiked or wide and smooth, resonant bandpass filters
Zone in on and reinforce a sound's dominant frequency, create overtones using both channels
Create sharp resonant peaks, dull or remove any harshness with VC damping
Use the resonator as a sound source by shaping and triggering tuned percussion tones or kick drums
Per channel: 2 x VCA based SVF, 2 x 1-pole damping LPF, 1 x 3-Pole resonance core
Identical circuitry per channel, CV and audio jacks are normalled between channels
Combine both channels in series for vowel filter responses and creative filtering
Specifications
Intellijel 1U format
Width 24 HP
Depth 34mm
Power requirements ~90mA +12V/~80mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K
… Read moreWinnows brings radical resonant filtering to the 1U row. Make your basslines growl like it's 1999. Create clean resonant tones and layers, tuned percussion, steep filtered peaks, vowel filters and more. Each filter channel comprises two state variable filter cores, the first producing a 2-Pole band-pass response, with resonance and self-oscillation amounts set by a 3-Pole feedback network. Signals are then routed through a 1-Pole low-pass damping stage to remove harshness if required. This can be routed to the channel output, or switched and routed through a second series of resonant SVF and 1-Pole LPF damping stages. This circuitry is identical per channel.
Features and uses
Steep and spiked or wide and smooth, resonant bandpass filters
Zone in on and reinforce a sound's dominant frequency, create overtones using both channels
Create sharp resonant peaks, dull or remove any harshness with VC damping
Use the resonator as a sound source by shaping and triggering tuned percussion tones or kick drums
Per channel: 2 x VCA based SVF, 2 x 1-pole damping LPF, 1 x 3-Pole resonance core
Identical circuitry per channel, CV and audio jacks are normalled between channels
Combine both channels in series for vowel filter responses and creative filtering
Specifications
Intellijel 1U format
Width 24 HP
Depth 34mm
Power requirements ~90mA +12V/~80mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K
1 in stock $192.34
Click for better price!
or call +44 20 7424 1960
quote 1008005
quote 1008005
People also bought...
Rossum Electro-Music Locutus MIDI Mediator Module For Assimil8or (black) (expander/MIDI/utility module)
Cat: 996361 Rel: 15 Apr 24
MIDI mediator module for Assimil8or - 6HP
Notes: LOCUTUS is designed to interface Assimil8or with MIDI instruments, controllers, and sequencers to provide multichannel modulation and new polyphonic possibilities.
LOCUTUS includes a special attached cable to connect to the Assimil8or CPU behind the panel.
LOCUTUS is 6 HP wide and 25mm deep.
MIDI sources connected to LOCUTUS’ MIDI IN port can be used to modulate Assimil8or parameters using velocity, channel pressure, and MIDI CC (Continuous Controller) messages, select presets using MIDI Program Change (PC) messages, and/or optionally trigger Assimil8or channels with MIDI notes using user-selectable assignment modes. MIDI Setups can be configured with assignment modes including Dynamic, which intelligently cycles through Assimil8or’s channels to easily create polyphonic patches, Multi assignment modes ideal for playing multitimbral Assimil8or patches with MIDI sequencers, SP-1200 modes designed especially for triggering Assimil8or with SP-1200’s MIDI output, and more.
Locutus’ MIDI OUT port can be used to optionally transmit program messages when presets are changed and/or to send MIDI CC data based on the analog control voltages patched to Assimil8or’s 24 CV inputs. Using the new CV-to-MIDI options, Assimil8or and Locutus can be configured to control and modulate MIDI equipment using a eurorack modular system.
… Read moreLOCUTUS includes a special attached cable to connect to the Assimil8or CPU behind the panel.
LOCUTUS is 6 HP wide and 25mm deep.
MIDI sources connected to LOCUTUS’ MIDI IN port can be used to modulate Assimil8or parameters using velocity, channel pressure, and MIDI CC (Continuous Controller) messages, select presets using MIDI Program Change (PC) messages, and/or optionally trigger Assimil8or channels with MIDI notes using user-selectable assignment modes. MIDI Setups can be configured with assignment modes including Dynamic, which intelligently cycles through Assimil8or’s channels to easily create polyphonic patches, Multi assignment modes ideal for playing multitimbral Assimil8or patches with MIDI sequencers, SP-1200 modes designed especially for triggering Assimil8or with SP-1200’s MIDI output, and more.
Locutus’ MIDI OUT port can be used to optionally transmit program messages when presets are changed and/or to send MIDI CC data based on the analog control voltages patched to Assimil8or’s 24 CV inputs. Using the new CV-to-MIDI options, Assimil8or and Locutus can be configured to control and modulate MIDI equipment using a eurorack modular system.
1 in stock $226.04
Click for better price!
or call +44 20 7424 1960
quote 996361
quote 996361
People also bought...
Rossum Electro-Music Assimil8or Multi-Timbral Phase Modulation Sampler Module (black) (sampling/CV modulation/digital/drum/dual/stereo/multiple/LFO module)
Cat: 996331 Rel: 15 Apr 24
multi-timbral phase modulation sampler module - 28HP
Notes: Designed to provide a powerful, flexible sampling engine for modular synthesis, the ASSIMIL8OR Multi-Timbral Phase Modulation Sampler module is the latest incarnation of Dave Rossum's decades-long pioneering of affordable professional sampling technology.
ASSIMIL8OR provides eight independent channels of sampling with sound quality that can range from extremely hi-fi to low fi, all with extensive real-time CV control.
Assimil8or Specifications
Sample memory
2,300 seconds at 48kHz mono, freely allocatable between the 8 channels
Sample rates
48kHZ, 96kHZ, 192kHZ
A/D & D/A
24 Bits
Internal processing
32 Bits
Latency
100 microseconds at the Mix Outputs
180 microseconds at the Individual Outputs
Inputs
Sample L/R
2x 3.5mm mono socket
100kO Input Impedance
Gate/Trigger 1-8
8x 3.5mm mono socket
100kO Input Impedance
1.6V threshold
Control Voltage A 1-8
8x 3.5mm mono socket
100kO Input Impedance
96 kHz sample rate
Anti-alias filtered to 20kHz bandwidth
Control Voltage B&C 1-8
16x 3.5mm mono socket
100kO Input Impedance
48 kHz sample rate
No anti-alias filtering
Outputs
Mix Outputs L/R
2x 3.5mm mono socket
1kO Impedance
Individual Outputs
8x 3.5mm mono socket
1kO Impedance
Power requirements: +/-12V via 16-pin, Doepfer-style connector
Current draw: 220mA +12V, 30mA -12V
Dimensions: 28HP (W); Panel to power connector (with connector plugged in) 25mm (D)
Supplied accessories:
1x Micro SD card
1x 16-pin, Doepfer-style cable
4x M3 screws
4x M2.5 screws
4x Nylon washers
1x Quickstart Guide
… Read moreASSIMIL8OR provides eight independent channels of sampling with sound quality that can range from extremely hi-fi to low fi, all with extensive real-time CV control.
Assimil8or Specifications
Sample memory
2,300 seconds at 48kHz mono, freely allocatable between the 8 channels
Sample rates
48kHZ, 96kHZ, 192kHZ
A/D & D/A
24 Bits
Internal processing
32 Bits
Latency
100 microseconds at the Mix Outputs
180 microseconds at the Individual Outputs
Inputs
Sample L/R
2x 3.5mm mono socket
100kO Input Impedance
Gate/Trigger 1-8
8x 3.5mm mono socket
100kO Input Impedance
1.6V threshold
Control Voltage A 1-8
8x 3.5mm mono socket
100kO Input Impedance
96 kHz sample rate
Anti-alias filtered to 20kHz bandwidth
Control Voltage B&C 1-8
16x 3.5mm mono socket
100kO Input Impedance
48 kHz sample rate
No anti-alias filtering
Outputs
Mix Outputs L/R
2x 3.5mm mono socket
1kO Impedance
Individual Outputs
8x 3.5mm mono socket
1kO Impedance
Power requirements: +/-12V via 16-pin, Doepfer-style connector
Current draw: 220mA +12V, 30mA -12V
Dimensions: 28HP (W); Panel to power connector (with connector plugged in) 25mm (D)
Supplied accessories:
1x Micro SD card
1x 16-pin, Doepfer-style cable
4x M3 screws
4x M2.5 screws
4x Nylon washers
1x Quickstart Guide
1 in stock $969.52
Click for better price!
or call +44 20 7424 1960
quote 996331
quote 996331
People also bought...
Rossum Electro-Music Linnaeus Stereo Thru-Zero State Variable Filter Module (black) (modular synthesiser)
Cat: 996358 Rel: 15 Apr 24
Stereo thru-zero state variable filter module - 16HP
Notes: Following in the tradition of Evolution and Morpheus, LINNAEUS represents yet another Dave Rossum innovation in filter technology.
LINNAEUS is a stereo state variable filter that provides the unique ability to linearly modulate its resonant frequency through zero into negative frequency, while maintaining stability. With extensive voltage control of nearly every parameter, Linnaeus lets you manipulate the filter's natural response curve in new ways, to create both subtle and dramatic timbral effects. And with a "one-knob-per-parameter" interface, LINNAEUS inspires sonic creativity that invites (and rewards) real-time interaction.
LINNAEUS's cutoff/resonant frequency is exponentially voltage controllable from sub-audio to ultrasonic frequencies, while its resonant gain (Q) is exponentially voltage controllable from 0dB to greater than 60dB.
LINNAEUS's channel output response characteristics are independently and continuously variable from Lowpass, through Bandpass, Highpass and Notch, to Low and High Shelving characteristics. Voltage control of the response characteristics are independently selectable for each of the two channels.
The linear thru-zero modulation is provided by an integrated modulation oscillator and/or an External Linear FM modulation input.
The voltage-controllable modulation oscillator can track the filter's exponential frequency or operate independently. The modulation oscillator's output waveform is continuously variable from Off through Sine, Triangle, and Sawtooth, to Square. The modulation oscillator output is summed with the external linear FM input and applied to the modulation index VCA, which controls the linear thru-zero modulation index from zero to 8X. The modulation index is, of course, also voltage controllable.
LINNAEUS features include:
- Ultra-wide frequency range, exponentially voltage-controllable from sub-audio to ultrasonic via precise 1V/OCT and attenuverted CV inputs.
- Thru-zero linear frequency modulation via an internal modulation oscillator and/or an external linear FM input.
- Variable linear modulation index, voltage-controllable via an attenuverted CV input.
- Resonance (Q) exponentially voltage-controllable from 0dB to greater than 60dB via 6dB/V and attenuverted CV inputs.
- Continuously variable response characteristics independently selectable for each of the two channels via individual Response Enable controls. Characteristics include Lowpass (12db/oct and 6db/oct), Bandpass, Highpass (12db/oct and 6db/oct), Notch, and Low and High Shelving.
- Voltage control of response characteristics via an attenuverted CV input. Individual Response CV Enable controls let you independently enable or disable CV control of response for each channel.
- An integrated modulation oscillator with continuously variable waveform from Off through Sine, Triangle, Sawtooth and Square. Its frequency can be exponentially voltage controlled via an attenuverted CV input.
- A Track control that lets the modulation oscillator precisely track the filter's exponential frequency.
- Stereo inputs and outputs. LINNAEUS can process a stereo signal or two independent mono signals. While the two channels share the filter's cutoff/resonant frequency, the filter response characteristics can be independently controlled for each channel.
- The solid, high-quality construction you expect from Rossum Electro-Music.
What's with the egg?
The functional description above describes LINNAEUS as originally conceived and designed by Dave. However, late in the beta testing process, Rossum's tester, Chris Meyer, raised the possibility of alternative behavior that would let LINNAEUS function as a self-contained (i.e., no input required) stereo oscillator and/or FM percussion voice with some really powerful timbral capabilities.
While Rossum were initially hesitant to try to shoehorn the new functions into the existing interface, once Dave had prototyped them, it was clear to us all that they were just too cool not to include. So, Rossum have provided them in the form of alternate firmware accessed by pressing and holding the Egg button.
LINNAEUS is 16HP wide and 25mm deep.
Power requirements (max): 155mA +12V, 36mA -12V. Reverse polarity protected.
… Read moreLINNAEUS is a stereo state variable filter that provides the unique ability to linearly modulate its resonant frequency through zero into negative frequency, while maintaining stability. With extensive voltage control of nearly every parameter, Linnaeus lets you manipulate the filter's natural response curve in new ways, to create both subtle and dramatic timbral effects. And with a "one-knob-per-parameter" interface, LINNAEUS inspires sonic creativity that invites (and rewards) real-time interaction.
LINNAEUS's cutoff/resonant frequency is exponentially voltage controllable from sub-audio to ultrasonic frequencies, while its resonant gain (Q) is exponentially voltage controllable from 0dB to greater than 60dB.
LINNAEUS's channel output response characteristics are independently and continuously variable from Lowpass, through Bandpass, Highpass and Notch, to Low and High Shelving characteristics. Voltage control of the response characteristics are independently selectable for each of the two channels.
The linear thru-zero modulation is provided by an integrated modulation oscillator and/or an External Linear FM modulation input.
The voltage-controllable modulation oscillator can track the filter's exponential frequency or operate independently. The modulation oscillator's output waveform is continuously variable from Off through Sine, Triangle, and Sawtooth, to Square. The modulation oscillator output is summed with the external linear FM input and applied to the modulation index VCA, which controls the linear thru-zero modulation index from zero to 8X. The modulation index is, of course, also voltage controllable.
LINNAEUS features include:
- Ultra-wide frequency range, exponentially voltage-controllable from sub-audio to ultrasonic via precise 1V/OCT and attenuverted CV inputs.
- Thru-zero linear frequency modulation via an internal modulation oscillator and/or an external linear FM input.
- Variable linear modulation index, voltage-controllable via an attenuverted CV input.
- Resonance (Q) exponentially voltage-controllable from 0dB to greater than 60dB via 6dB/V and attenuverted CV inputs.
- Continuously variable response characteristics independently selectable for each of the two channels via individual Response Enable controls. Characteristics include Lowpass (12db/oct and 6db/oct), Bandpass, Highpass (12db/oct and 6db/oct), Notch, and Low and High Shelving.
- Voltage control of response characteristics via an attenuverted CV input. Individual Response CV Enable controls let you independently enable or disable CV control of response for each channel.
- An integrated modulation oscillator with continuously variable waveform from Off through Sine, Triangle, Sawtooth and Square. Its frequency can be exponentially voltage controlled via an attenuverted CV input.
- A Track control that lets the modulation oscillator precisely track the filter's exponential frequency.
- Stereo inputs and outputs. LINNAEUS can process a stereo signal or two independent mono signals. While the two channels share the filter's cutoff/resonant frequency, the filter response characteristics can be independently controlled for each channel.
- The solid, high-quality construction you expect from Rossum Electro-Music.
What's with the egg?
The functional description above describes LINNAEUS as originally conceived and designed by Dave. However, late in the beta testing process, Rossum's tester, Chris Meyer, raised the possibility of alternative behavior that would let LINNAEUS function as a self-contained (i.e., no input required) stereo oscillator and/or FM percussion voice with some really powerful timbral capabilities.
While Rossum were initially hesitant to try to shoehorn the new functions into the existing interface, once Dave had prototyped them, it was clear to us all that they were just too cool not to include. So, Rossum have provided them in the form of alternate firmware accessed by pressing and holding the Egg button.
LINNAEUS is 16HP wide and 25mm deep.
Power requirements (max): 155mA +12V, 36mA -12V. Reverse polarity protected.
1 in stock $485.26
Click for better price!
or call +44 20 7424 1960
quote 996358
quote 996358
People also bought...
Rossum Electro-Music Morpheus Stereo Morphing Z-Plane Filter Module (black) (filter/sequencer/dual/stereo/effect module)
Cat: 996369 Rel: 15 Apr 24
Stereo morphing z-plane filter module - 18HP
Notes: With the MORPHEUS digital filter module, Rossum are finally able to unleash the full power of the 14-pole Z0-Plane Filters that Dave invented for the E-mu Morpheus synthesizer.
The MORPHEUS Eurorack module includes over 280 filter configurations, which are called Cubes. Each Cube is composed of up to 8 complex filters that you can picture as being at the corners of a three dimensional cube (hence the name). Morpheus gives you the ability to smoothly interpolate between those 8 filters within the cube's three dimensional space.
Due to processor limitations back in the day, the original Morpheus was capable of real-time morphing in one dimension, but interpolation in the frequency and transform dimensions were set at note-on and remained static for the remainder of the note. But even with that limitation, Morpheus offered sonic capabilities that are unmatched to this day.
With the MORPHEUS filter module, you now have simultaneous real-time CV control of all three dimensions, for dynamic timbral effects unlike anything you've ever heard before. In stereo.
Like all Rossum Electro-Music digital modules, all parameters are available for adjustment with a single button press. No menu diving.
Morpheus Specifications
Filter cubes: 289
Filters: 1000
Filter sequences: 200
Sequence steps: 20,000 Dynamically Allocated
Inputs: Audio L/R
2x 3.5mm mono socket
100kO Input Impedance
Full Level Frequency CV
1x 3.5mm mono socket
100kO Input Impedance
Attenuverted Frequency CV
1x 3.5mm mono socket
100kO Input Impedance
Attenuverted Morph CV
1x 3.5mm mono socket
100kO Input Impedance
Attenuverted Transform/Distortion CV
1x 3.5mm mono socket
100kO Input Impedance
Filter Sequencer Dec
1x 3.5mm mono socket
100kO Input Impedance
1.6V threshold
Filter Sequencer Inc
1x 3.5mm mono socket
100kO Input Impedance
1.6V threshold
Filter Sequencer Reset
1x 3.5mm mono socket
100kO Input Impedance
1.6V threshold
Outputs
Audio L/R
2x 3.5mm mono socket
1kO Impedance
Power requirements
+/-12V via 16-pin, Doepfer-style connector
Current draw
135mA +12V, 25mA -12V (maximum)
Dimensions
18HP (W); Panel to power connector (with connector plugged in) 25mm (D)
Supplied accessories
1x 16-pin, Doepfer-style cable
4x M3 screws
4x M2.5 screws
4x Nylon washers
1x Quickstart Guide
… Read moreThe MORPHEUS Eurorack module includes over 280 filter configurations, which are called Cubes. Each Cube is composed of up to 8 complex filters that you can picture as being at the corners of a three dimensional cube (hence the name). Morpheus gives you the ability to smoothly interpolate between those 8 filters within the cube's three dimensional space.
Due to processor limitations back in the day, the original Morpheus was capable of real-time morphing in one dimension, but interpolation in the frequency and transform dimensions were set at note-on and remained static for the remainder of the note. But even with that limitation, Morpheus offered sonic capabilities that are unmatched to this day.
With the MORPHEUS filter module, you now have simultaneous real-time CV control of all three dimensions, for dynamic timbral effects unlike anything you've ever heard before. In stereo.
Like all Rossum Electro-Music digital modules, all parameters are available for adjustment with a single button press. No menu diving.
Morpheus Specifications
Filter cubes: 289
Filters: 1000
Filter sequences: 200
Sequence steps: 20,000 Dynamically Allocated
Inputs: Audio L/R
2x 3.5mm mono socket
100kO Input Impedance
Full Level Frequency CV
1x 3.5mm mono socket
100kO Input Impedance
Attenuverted Frequency CV
1x 3.5mm mono socket
100kO Input Impedance
Attenuverted Morph CV
1x 3.5mm mono socket
100kO Input Impedance
Attenuverted Transform/Distortion CV
1x 3.5mm mono socket
100kO Input Impedance
Filter Sequencer Dec
1x 3.5mm mono socket
100kO Input Impedance
1.6V threshold
Filter Sequencer Inc
1x 3.5mm mono socket
100kO Input Impedance
1.6V threshold
Filter Sequencer Reset
1x 3.5mm mono socket
100kO Input Impedance
1.6V threshold
Outputs
Audio L/R
2x 3.5mm mono socket
1kO Impedance
Power requirements
+/-12V via 16-pin, Doepfer-style connector
Current draw
135mA +12V, 25mA -12V (maximum)
Dimensions
18HP (W); Panel to power connector (with connector plugged in) 25mm (D)
Supplied accessories
1x 16-pin, Doepfer-style cable
4x M3 screws
4x M2.5 screws
4x Nylon washers
1x Quickstart Guide
1 in stock $579.84
People also bought...
Cat: 1014286 Rel: 01 Jan 90
B-STOCK: Without original box, product in perfect working order
Notes: ***B-STOCK: Without original box, product in perfect working order***
Pico BBD is surprisingly great sounding (we were surprised ourselves), full analogue 4092 stage bucket brigade delay module; the smallest BBD in Eurorack. Besides nice and clean flanger and delay effects, at full CW settings of TIME and feedback knobs it can produce extreme sonic artefacts. Tweak knobs and enjoy!
… Read morePico BBD is surprisingly great sounding (we were surprised ourselves), full analogue 4092 stage bucket brigade delay module; the smallest BBD in Eurorack. Besides nice and clean flanger and delay effects, at full CW settings of TIME and feedback knobs it can produce extreme sonic artefacts. Tweak knobs and enjoy!
1 in stock $85.73
People also bought...
Buchla & TipTop Audio Mixer & Preamplifier Model 207t Module (B-STOCK) (mixer/preamp module)
Cat: 1013224 Rel: 01 Jan 90
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***
A characteristically unique take on mixing from Buchla, with six mono inputs and a built-in mic/guitar pre-amp. Each channel can be cued to a monitor mix, while the first and last channels also include voltage-controlled panning.
Supplier's Notes:
The Tiptop 207t is a modern reimagining of the classic Don Buchla 207 Mixer/Preamplifier from the 1970s 200 Series. This stereo mixer comes with a built-in preamp that allows you to boost external instruments and microphones, making it a versatile tool for any modular setup. The 207t also features a six-channel mixer with a variety of signal routing options, including the ability to route channels to the monitor and L&R signal outputs, with per-channel control over loudness and panning.
Each channel has a Mon switch that sends the channel's signal to the monitor outputs, which are always full-volume and summed to mono, making it useful for basic monitoring applications or rudimentary mixing. The Prog switch sends the signal to the L&R signal outputs, with loudness controlled by the Level Adjustment slider and panning determined by the Channel Assignment knobs. The first and sixth channels offer voltage control of panning; these channels are hard-panned when no CV is applied.
The preamp section features a 1/4" input and multiple gain settings, making it suitable for use with external line level instruments, electric guitars, or dynamic microphones. The continuous amplification control provides added flexibility for your audio needs. Finally, the Expansion In is a stereo input that sums to the left and right main outputs, which is great for chaining multiple 207t modules or adding another stereo source at the final output.
While the 207t's functionality may be simple, it is an essential part of any 200t system, serving as the glue that holds everything together. The Tiptop 207t is a fantastic mixer/preamp option that delivers quality sound and reliable performance.
Buchla 207t Features
Mixer/preamp module based on Don Buchla's original 207 design
Six-channel mixer with per-channel level control and panning
Voltage-controllable panning on channels 1 and 6
Manual panning on channels 2-4
Program switches can act as channel mutes for main outputs
Mon switches route signal (in mono) to Monitor output
Expansion input useful for stereo chaining and more
Re-designed preamp for high audio fidelity
Preamp suitable for use with external instruments, electric guitars, dynamic microphones, and more
Eurorack module
28hp wide
… Read moreA characteristically unique take on mixing from Buchla, with six mono inputs and a built-in mic/guitar pre-amp. Each channel can be cued to a monitor mix, while the first and last channels also include voltage-controlled panning.
Supplier's Notes:
The Tiptop 207t is a modern reimagining of the classic Don Buchla 207 Mixer/Preamplifier from the 1970s 200 Series. This stereo mixer comes with a built-in preamp that allows you to boost external instruments and microphones, making it a versatile tool for any modular setup. The 207t also features a six-channel mixer with a variety of signal routing options, including the ability to route channels to the monitor and L&R signal outputs, with per-channel control over loudness and panning.
Each channel has a Mon switch that sends the channel's signal to the monitor outputs, which are always full-volume and summed to mono, making it useful for basic monitoring applications or rudimentary mixing. The Prog switch sends the signal to the L&R signal outputs, with loudness controlled by the Level Adjustment slider and panning determined by the Channel Assignment knobs. The first and sixth channels offer voltage control of panning; these channels are hard-panned when no CV is applied.
The preamp section features a 1/4" input and multiple gain settings, making it suitable for use with external line level instruments, electric guitars, or dynamic microphones. The continuous amplification control provides added flexibility for your audio needs. Finally, the Expansion In is a stereo input that sums to the left and right main outputs, which is great for chaining multiple 207t modules or adding another stereo source at the final output.
While the 207t's functionality may be simple, it is an essential part of any 200t system, serving as the glue that holds everything together. The Tiptop 207t is a fantastic mixer/preamp option that delivers quality sound and reliable performance.
Buchla 207t Features
Mixer/preamp module based on Don Buchla's original 207 design
Six-channel mixer with per-channel level control and panning
Voltage-controllable panning on channels 1 and 6
Manual panning on channels 2-4
Program switches can act as channel mutes for main outputs
Mon switches route signal (in mono) to Monitor output
Expansion input useful for stereo chaining and more
Re-designed preamp for high audio fidelity
Preamp suitable for use with external instruments, electric guitars, dynamic microphones, and more
Eurorack module
28hp wide
1 in stock $223.76
People also bought...
EarthQuaker Devices The Wave Transformer Transfiguration Oscillator Module (B-STOCK) (oscillator module)
Cat: 1013236 Rel: 01 Jan 90
B-STOCK: Box opened, but product is in excellent condition and in perfect working order
Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***
The Wave Transformer is a complex single oscillator with 7 audio outputs. Its method of wave shaping differs from other complex oscillators in that it is not based upon classic wave folding such as is common in West Coast synthesis, or filtration such as is common in East Coast synthesis.
This analogue, vintage-voiced, voltage-controlled oscillator features over 8 octaves of accurate pitch tracking. Its 7 simultaneous wave outputs include a unique Complex output. This strange and novel output varies between a simple waveform (triangle, unless you patch a signal into the Shape Insert jack) and a complex transformation of the harmonic structure of the original waveform. It contains a unique mixture of the fundamental frequency, odd order harmonics, even order harmonics and subharmonics. The Sub Octave panel control will determine whether the sub harmonics are derived from one octave down, two octaves down, or are muted altogether. It will vary from a simple waveform to a silhouette of your cat watching you as you react to a "present" that it left for you on the counter. No, seriously.
The module's Transform control morphs from a basic waveform through many strange iterations into a complex, gnarled mass of audio mutations at the Complex output using an asymmetrical multi differential audio transmutation circuit. You can yield countless variations on these permutations by combining this novel circuit with Hard Sync, Soft Sync, Linear FM and Exponential FM.
Additionally, you can mute the source waveform to use the circuit as a harmonic gate/VCA, rendering the Wave Transformer a voice unto itself.
If that is not enough, there is a Shape Insert that allows you to transform external oscillations and modular-level audio sources.
… Read moreThe Wave Transformer is a complex single oscillator with 7 audio outputs. Its method of wave shaping differs from other complex oscillators in that it is not based upon classic wave folding such as is common in West Coast synthesis, or filtration such as is common in East Coast synthesis.
This analogue, vintage-voiced, voltage-controlled oscillator features over 8 octaves of accurate pitch tracking. Its 7 simultaneous wave outputs include a unique Complex output. This strange and novel output varies between a simple waveform (triangle, unless you patch a signal into the Shape Insert jack) and a complex transformation of the harmonic structure of the original waveform. It contains a unique mixture of the fundamental frequency, odd order harmonics, even order harmonics and subharmonics. The Sub Octave panel control will determine whether the sub harmonics are derived from one octave down, two octaves down, or are muted altogether. It will vary from a simple waveform to a silhouette of your cat watching you as you react to a "present" that it left for you on the counter. No, seriously.
The module's Transform control morphs from a basic waveform through many strange iterations into a complex, gnarled mass of audio mutations at the Complex output using an asymmetrical multi differential audio transmutation circuit. You can yield countless variations on these permutations by combining this novel circuit with Hard Sync, Soft Sync, Linear FM and Exponential FM.
Additionally, you can mute the source waveform to use the circuit as a harmonic gate/VCA, rendering the Wave Transformer a voice unto itself.
If that is not enough, there is a Shape Insert that allows you to transform external oscillations and modular-level audio sources.
1 in stock $195.45
People also bought...
ALM Mega Milton Compact Utilities Module (B-STOCK) (utility/attenuator/external/mixer/multiple/noise/sample & hold/slew limiter module)
Cat: 1013240 Rel: 01 Jan 90
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***
The 'Mega Milton' is a smorgasbord of handy all analogue utilities in just 8HP that will greatly extend the functionality of your Eurorack system.
It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analogue white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor.
All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input.
The 'Mega Milton' provides essential classic synthesizer building blocks for patching in any Eurorack system.
Ideal For
Incorporating stereo external sources easily into your Eurorack system.
Signal attenuation and basic mixing in a small space.
Building percussion sounds from an analogue noise source.
Producing clocked random to add interest and variation to patterns and sounds.
Adding gated 303 style slides to patterns.
Creating and Manipulating patterns with Sample and Hold.
Buffering and monitoring voltage across multiple VCOs or other destinations with no drop.
Tech Specs
Supply: +12V 70mA / -12V 70mA
Size: 8HP
Depth: 32mm
… Read moreThe 'Mega Milton' is a smorgasbord of handy all analogue utilities in just 8HP that will greatly extend the functionality of your Eurorack system.
It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analogue white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor.
All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input.
The 'Mega Milton' provides essential classic synthesizer building blocks for patching in any Eurorack system.
Ideal For
Incorporating stereo external sources easily into your Eurorack system.
Signal attenuation and basic mixing in a small space.
Building percussion sounds from an analogue noise source.
Producing clocked random to add interest and variation to patterns and sounds.
Adding gated 303 style slides to patterns.
Creating and Manipulating patterns with Sample and Hold.
Buffering and monitoring voltage across multiple VCOs or other destinations with no drop.
Tech Specs
Supply: +12V 70mA / -12V 70mA
Size: 8HP
Depth: 32mm
1 in stock $150.51
FORTHCOMING
Related products...
MachineRoom Filth Analogue Transistor Ladder Filter Module (distortion/filter/VCA module)
Cat: 983127
Analogue low pass or high pass 12dB or 24dB transistor ladder filter module - 10HP
Notes: The basis of the module is a version of the transistor ladder with low-end compensation at resonance, to which Machineroom have added aggressive Overload and linear VCA. Thanks to three audio inputs, FILTH can work with polyphonic patches, if you add Trilobite (or another triple osc) and ADSR to it, you will get a paraphonic synthesizer. 2 VCA inputs in the classic case allow you to use loudness envelope and voltage offset (for example, velocity) at the same time, but there are many more options for their application.
Works in LP/HP and 12/24 db modes
In the 24db mode, the filter self-oscillates and can act as a sine generator with perfect pitch tracking in the range of 5 octaves.
Despite the name, without overload, the module can be used as a vanilla filter, but its brutal version is generally more preferrable.
Based on "transistor ladder" design of Minimoog 204D with a cut-off slope of -24 db/octave as in various Moog synthesisers.
10HP
* skiff-friendly (25mm depth)
* 28 mA +12V
* 21 mA -12V
* 0 mA +5V
hand-built in Kyiv, Ukraine
… Read moreWorks in LP/HP and 12/24 db modes
In the 24db mode, the filter self-oscillates and can act as a sine generator with perfect pitch tracking in the range of 5 octaves.
Despite the name, without overload, the module can be used as a vanilla filter, but its brutal version is generally more preferrable.
Based on "transistor ladder" design of Minimoog 204D with a cut-off slope of -24 db/octave as in various Moog synthesisers.
10HP
* skiff-friendly (25mm depth)
* 28 mA +12V
* 21 mA -12V
* 0 mA +5V
hand-built in Kyiv, Ukraine
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $238.49
(No payment required now - pay when released)
FORTHCOMING
Related products...
MachineRoom Trilobite Triple Analogue Saw-Core Oscillator Module (LFO/noise/oscillator module)
Cat: 983133
Triple analogue saw-core oscillator module - 26HP
Notes: TRILOBITE is a triple oscillator analogue module inspired by the original Moog schematics and made with thru-hole components only.
The module features:
- 4 octave ranges
- 3 waveforms (triangle, square, saw),
- UNISON (FINE) control with a range of +/- 12 semi-tones
- Independent LIN FM and PWM inputs with attenuators
- White noise source
Independent audio output is provided for each oscillator. A mixed output is also present featuring a level control.
We are recommended to use independent audio outputs to avoid distortion, in this case MiX output works as WHITE NOISE source with attenuator.
V/oct input of the first oscillator is normalled to all 3 oscillators, so OSC2 and OSC3 would track it too, however, connecting other signals to the other V/oct inputs make each input independent.
The minimum frequency of each oscillator is as low as 3Hz which makes it possible to use them as LFO.
Each oscillator tracks up to 9 octaves.
V/Oct range: 0-10 V
NB: Trilobite as is a full analogue module so should be allowed 5-7 minutes to warm up before use.
* 26HP
* skiff-friendly (25mm depth)
* 200 mA +12V
* 180 mA -12V
* 0 mA +5V
hand-built in Kyiv, Ukraine
… Read moreThe module features:
- 4 octave ranges
- 3 waveforms (triangle, square, saw),
- UNISON (FINE) control with a range of +/- 12 semi-tones
- Independent LIN FM and PWM inputs with attenuators
- White noise source
Independent audio output is provided for each oscillator. A mixed output is also present featuring a level control.
We are recommended to use independent audio outputs to avoid distortion, in this case MiX output works as WHITE NOISE source with attenuator.
V/oct input of the first oscillator is normalled to all 3 oscillators, so OSC2 and OSC3 would track it too, however, connecting other signals to the other V/oct inputs make each input independent.
The minimum frequency of each oscillator is as low as 3Hz which makes it possible to use them as LFO.
Each oscillator tracks up to 9 octaves.
V/Oct range: 0-10 V
NB: Trilobite as is a full analogue module so should be allowed 5-7 minutes to warm up before use.
* 26HP
* skiff-friendly (25mm depth)
* 200 mA +12V
* 180 mA -12V
* 0 mA +5V
hand-built in Kyiv, Ukraine
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $357.74
(No payment required now - pay when released)
FORTHCOMING
Related products...
MachineRoom 204D Dual Analogue VCF Module (dual/stereo/filter module)
Cat: 983136
Dual analogue voltage-controlled low-pass filter module - 10HP
Notes: MachineRoom 204D Dual VCF is a dual voltage-controlled low-pass filter, which filters out the higher parts of the sound spectrum and lets lower frequencies pass through.
Based on the "transistor ladder" design of Minimoog 204D with a cut-off slope of -24 db/octave as in various Moog synthesisers. Resonance (or Emphasis) is adjustable all the way up to self-oscillation with V/Oct tracking up to 4 octaves.
Filter has separate controls for both sections, but can be used for stereo operations as well.
4 cv inputs (2 with attenuators) allows complex cut off modulation
Skiff-friendly
25 mm deep
12HP
Power consumption: 120 mA +12V, 15mA -12V, 0 mA 5V
Hand-built in Kyiv, Ukraine
… Read moreBased on the "transistor ladder" design of Minimoog 204D with a cut-off slope of -24 db/octave as in various Moog synthesisers. Resonance (or Emphasis) is adjustable all the way up to self-oscillation with V/Oct tracking up to 4 octaves.
Filter has separate controls for both sections, but can be used for stereo operations as well.
4 cv inputs (2 with attenuators) allows complex cut off modulation
Skiff-friendly
25 mm deep
12HP
Power consumption: 120 mA +12V, 15mA -12V, 0 mA 5V
Hand-built in Kyiv, Ukraine
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $238.49
(No payment required now - pay when released)
FORTHCOMING
Related products...
MachineRoom 204D Analogue VCF Module (filter/mixer module)
Cat: 983140
Analogue voltage-controlled filter module - 10HP
Notes: MachineRoom PRODIGY 204D VCF is a voltage-controlled low-pass filter, which filters out the higher parts of the sound spectrum and lets lower frequences pass through.
Based on the "transistor ladder" design of Minimoog 204D with a cut-off slope of -24 db/octave as in various Moog synthesisers. Resonance (or Emphasis) is adjustable all the way up to self-oscillation with V/Oct tracking up to 4 octaves.
Works as passive 2-channel mixer with attenuators as well
3 cv inputs allows complex cut off modulation
Thru-hole components only
Skiff-friendly, 30mm deep
10HP
Power consumption: 120 mA +12V, 15mA -12V, 0 mA 5V
Hand-built in Kyiv, Ukraine
… Read moreBased on the "transistor ladder" design of Minimoog 204D with a cut-off slope of -24 db/octave as in various Moog synthesisers. Resonance (or Emphasis) is adjustable all the way up to self-oscillation with V/Oct tracking up to 4 octaves.
Works as passive 2-channel mixer with attenuators as well
3 cv inputs allows complex cut off modulation
Thru-hole components only
Skiff-friendly, 30mm deep
10HP
Power consumption: 120 mA +12V, 15mA -12V, 0 mA 5V
Hand-built in Kyiv, Ukraine
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $162.79
(No payment required now - pay when released)
FORTHCOMING
Related products...
MachineRoom Prodigy Dual Analogue VCO Module (LFO/oscillator/dual/stereo module)
Cat: 983141
Dual analogue voltage-controlled oscillator module - 20HP
Notes: MachineRoom PRODIGY DUAL VCO is an analogue dual oscillator based on the legendary Moog Prodigy synth schematics. MachineRoom improved Bob's design by incorporating ICs with better thermal stability, increased the range of secondary oscillator, and also added cross-modulation possibility. As usual for this limited run of full-analogue handmade modules, MachineRoom used only thru-hole components.
The module features 3 octave registers and 3 waveforms per oscillator.
OSC1 generates SAW, SQUARE, and TRIANGLE waves with 8, 16, 32 octave registers.
OSC2 generates SAW, PULSE, and TRIANGLE waves with 4, 8, 16 octave registers.
Unlike the original version, PRODIGY DUAL VCO allows switching OSC2 to the LFO mode to modulate OSC1 or other parameters (LFO range is from 0.1 Hz to 8.6 kHz). Precise pitch tracking is up to 7 octaves.
PITCH control has a range of +/- of 1.5 octaves with a central point (to have the ability to quickly return to the initial frequency with precision). The rise/fall time of the GLIDE/SLEW is up to 5 seconds
HARD SYNC switch allows syncing the phase and frequency of oscillators.
LINEAR FM input has a built-in attenuator.
OSC2 UNISON control has a range of +/- 7 semi-tones (increase/decrease relative to the Detune central point).
OSC2 V/Oct Tracking switch activates or disables the OSC2's LFO mode. When disabled, OSC2 stops v/oct tracking, and the UNISON knob becomes a control for the LFO frequency.
OSC1 - OSC2 FM switch enables OSC2 as an OSC1 modulator.
When HARD SYNC is switched ON, Pitch/Sync knob controls the phase of oscillators.
The output level of each oscillator is about 3.5V which allows passive mixing. PRODIGY DUAL VCO is analogue so should be allowed 5-7 minutes to warm up before use.
Skiff-friendly design.
Thru-hole components only
20HP / 35mm deep
Current consumption:
+12V - 125 mA
-12V - 105 mA
+5V - 0 mA
Hand-built in Kyiv, Ukraine
… Read moreThe module features 3 octave registers and 3 waveforms per oscillator.
OSC1 generates SAW, SQUARE, and TRIANGLE waves with 8, 16, 32 octave registers.
OSC2 generates SAW, PULSE, and TRIANGLE waves with 4, 8, 16 octave registers.
Unlike the original version, PRODIGY DUAL VCO allows switching OSC2 to the LFO mode to modulate OSC1 or other parameters (LFO range is from 0.1 Hz to 8.6 kHz). Precise pitch tracking is up to 7 octaves.
PITCH control has a range of +/- of 1.5 octaves with a central point (to have the ability to quickly return to the initial frequency with precision). The rise/fall time of the GLIDE/SLEW is up to 5 seconds
HARD SYNC switch allows syncing the phase and frequency of oscillators.
LINEAR FM input has a built-in attenuator.
OSC2 UNISON control has a range of +/- 7 semi-tones (increase/decrease relative to the Detune central point).
OSC2 V/Oct Tracking switch activates or disables the OSC2's LFO mode. When disabled, OSC2 stops v/oct tracking, and the UNISON knob becomes a control for the LFO frequency.
OSC1 - OSC2 FM switch enables OSC2 as an OSC1 modulator.
When HARD SYNC is switched ON, Pitch/Sync knob controls the phase of oscillators.
The output level of each oscillator is about 3.5V which allows passive mixing. PRODIGY DUAL VCO is analogue so should be allowed 5-7 minutes to warm up before use.
Skiff-friendly design.
Thru-hole components only
20HP / 35mm deep
Current consumption:
+12V - 125 mA
-12V - 105 mA
+5V - 0 mA
Hand-built in Kyiv, Ukraine
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $324.55
(No payment required now - pay when released)
People also bought...
Flame uMM MIDI-TRS-B Merge/Thru MIDI Module (MIDI/external utility module)
Cat: 990518 Rel: 10 Apr 24
2x MIDI merge & MIDI thru plus TR A/B converter module - 4HP
Notes: The "uMM" combines a MIDI merger and two independent THRU distributors in a module that is only 4 HP wide. All sockets on the module are in MIDI TRS-B format.
At the heart of the two-input MIDI merger is a small, powerful ARM processor with plenty of buffer memory. Two MIDI streams are mixed to one output and can also be tapped via an additional second output. Two LEDs signal the operation of the merger: one LED indicates MIDI activity at the inputs, and a second LED warns of too much data at the inputs.
The second group of functions consists of two independent, separate MIDI THRU distributors. The MIDI data at the respective MIDI input can be picked up and distributed at the three THRU outputs. If required, a 1-to-5 distributor can be created from the two units by connecting an output of the left group to the input of the right group.
Features:
4x MIDI IN (TRS-B)
2x MIDI-OUT (TRS-B)
6x MIDI-THRU (TRS-B)
Powered via Doepfer connector
… Read moreAt the heart of the two-input MIDI merger is a small, powerful ARM processor with plenty of buffer memory. Two MIDI streams are mixed to one output and can also be tapped via an additional second output. Two LEDs signal the operation of the merger: one LED indicates MIDI activity at the inputs, and a second LED warns of too much data at the inputs.
The second group of functions consists of two independent, separate MIDI THRU distributors. The MIDI data at the respective MIDI input can be picked up and distributed at the three THRU outputs. If required, a 1-to-5 distributor can be created from the two units by connecting an output of the left group to the input of the right group.
Features:
4x MIDI IN (TRS-B)
2x MIDI-OUT (TRS-B)
6x MIDI-THRU (TRS-B)
Powered via Doepfer connector
1 in stock $143.08
Click for better price!
or call +44 20 7424 1960
quote 990518
quote 990518
People also bought...
Endorphin.es Furthrrrr Generator Dual Complex VCO Module With Waveshaper (yellow) (B-STOCK) (oscillator/dual/stereo/function generator/LFO/noise/random module)
Cat: 1011600 Rel: 01 Jan 90
B-STOCK: Item refurbished, repaired and in perfect working order.
Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***
The Furthrrrr Generator has a main oscillator (carrier) with an extensive and fully voltage controllable wave multiplier and a modulation oscillator (modulator) that can cross-modulate the carrier. Each oscillator has hard and soft sync and also features an integrated tuner: if both LEDs are lit the VCO is at note A. Left LED is lit at note Ab and right LED at A#. Frequency potentiometers are ten-turn models and thus allow for easy tuning. Frequency range of the VCOs is 10Hz-10kHz (and much lower in modulator's LFO mode). Both VCOs feature 2 frequency CV inputs (1x with bipolar attenuator, 1x with 1V/octave), one FM input (jumper selectable between linear and exponential FM) as well as separate input for hard and soft sync. The voltage characteristic can be selected between 1V/octave and 1.2V/octave (Buchla norm).
The main oscillator (carrier) outputs the waveforms sine, saw, square and white noise. The two outputs marked with the magic eye are outputs of the "harmonic section" that generates very complex sounds by the wave multiplier and its parameters symmetry, order and Furthrrrr in the module's right-hand section. Symmetry lowers the level of even harmonics and amplifies the odd harmonics (this affects the pulse wave's width as well). Order adds saturation to the high order harmonics and resembles a low pass filter. Furthrrrr alters the level of harmonics set by the other parameters and produces very interesting, partly brute sounds with lots of harmonics by clipping and folding the wave. All three parameters can be voltage controlled. The carrier oscillator also has inputs for hard and soft sync, the sync-switch can synch directly to the modulator.
The modulation oscillator (modulator) has three wave forms with direct outputs: sine, saw and square. Using the internal modulation via the "mood section" the waveform is selected with a button; an additional staircase wave form is available here, but it can be overridden by inserting a signal into the external input socket. A switch activates the LFO mode.
The Mood section is responsible for the internal modulation of the carrier by the modulator. Switches determine the modulation destination(s) that can be activated simultaneously. These are the Furthrrrr parameter of the harmonic section, the amplitude and the frequency of the carrier oscillator. The "balanced" switch activates the ring modulation between both VCOs. intensity of modulation is controlled by the "mood index" potentiometer and the according CV input with bipolar attenuator.
… Read moreThe Furthrrrr Generator has a main oscillator (carrier) with an extensive and fully voltage controllable wave multiplier and a modulation oscillator (modulator) that can cross-modulate the carrier. Each oscillator has hard and soft sync and also features an integrated tuner: if both LEDs are lit the VCO is at note A. Left LED is lit at note Ab and right LED at A#. Frequency potentiometers are ten-turn models and thus allow for easy tuning. Frequency range of the VCOs is 10Hz-10kHz (and much lower in modulator's LFO mode). Both VCOs feature 2 frequency CV inputs (1x with bipolar attenuator, 1x with 1V/octave), one FM input (jumper selectable between linear and exponential FM) as well as separate input for hard and soft sync. The voltage characteristic can be selected between 1V/octave and 1.2V/octave (Buchla norm).
The main oscillator (carrier) outputs the waveforms sine, saw, square and white noise. The two outputs marked with the magic eye are outputs of the "harmonic section" that generates very complex sounds by the wave multiplier and its parameters symmetry, order and Furthrrrr in the module's right-hand section. Symmetry lowers the level of even harmonics and amplifies the odd harmonics (this affects the pulse wave's width as well). Order adds saturation to the high order harmonics and resembles a low pass filter. Furthrrrr alters the level of harmonics set by the other parameters and produces very interesting, partly brute sounds with lots of harmonics by clipping and folding the wave. All three parameters can be voltage controlled. The carrier oscillator also has inputs for hard and soft sync, the sync-switch can synch directly to the modulator.
The modulation oscillator (modulator) has three wave forms with direct outputs: sine, saw and square. Using the internal modulation via the "mood section" the waveform is selected with a button; an additional staircase wave form is available here, but it can be overridden by inserting a signal into the external input socket. A switch activates the LFO mode.
The Mood section is responsible for the internal modulation of the carrier by the modulator. Switches determine the modulation destination(s) that can be activated simultaneously. These are the Furthrrrr parameter of the harmonic section, the amplitude and the frequency of the carrier oscillator. The "balanced" switch activates the ring modulation between both VCOs. intensity of modulation is controlled by the "mood index" potentiometer and the according CV input with bipolar attenuator.
1 in stock $558.93
People also bought...
Crosspatch Triggerpad Dynamic Trigger Sequencer Module (sequencer module)
Cat: 995020 Rel: 04 Apr 24
8-channel sequencer module - 6HP
Notes: Neat little interface module to help pad controllers play nicely with Eurorack. Hook up a device like a Launchpad or APC and jam out rhythms with retriggering options, dynamic control and MIDI sync.
Supplier's Notes:
Triggerpad is a dynamic trigger/gate sequencer in eurorack format on only 6hp. A USB MIDI controller with an 8×8 grid like Launchpad or APC is used to display and edit the patterns (see the list of compatible controllers). The user experience is tailored to live performance and detailed composition: dial in simple rhythms or complex polyrhythms, retrigger at audio rate, create dynamic percussions with velocity triggers or use longer pulses to create steppy modulations.
By using USB MIDI controllers that you might already have and maybe not use anymore, we avoid producing more plastic. Give your old gear a second life!
Dimensions & consumption
Width: 6hp
Depth: 39mm
+12V: 120mA (without USB MIDI controller connected)
-12V: 20mA
5V: 0mA
USB MIDI controllers consume up to 150mA on +12V
Connectivity
8 dynamic trigger/gate outputs (0-10V)
USB MIDI Host
Clock in
Clock out
Reset in
Reset out
Compatibility
Launchpad Pro Mk3
Launchpad X
Launchpad Mini Mk3
Launchpad Mini Mk2
Launchpad Pro
Launchpad Mk2
Launchpad S
APC Mini Mk1
APC Mini Mk2
… Read moreSupplier's Notes:
Triggerpad is a dynamic trigger/gate sequencer in eurorack format on only 6hp. A USB MIDI controller with an 8×8 grid like Launchpad or APC is used to display and edit the patterns (see the list of compatible controllers). The user experience is tailored to live performance and detailed composition: dial in simple rhythms or complex polyrhythms, retrigger at audio rate, create dynamic percussions with velocity triggers or use longer pulses to create steppy modulations.
By using USB MIDI controllers that you might already have and maybe not use anymore, we avoid producing more plastic. Give your old gear a second life!
Dimensions & consumption
Width: 6hp
Depth: 39mm
+12V: 120mA (without USB MIDI controller connected)
-12V: 20mA
5V: 0mA
USB MIDI controllers consume up to 150mA on +12V
Connectivity
8 dynamic trigger/gate outputs (0-10V)
USB MIDI Host
Clock in
Clock out
Reset in
Reset out
Compatibility
Launchpad Pro Mk3
Launchpad X
Launchpad Mini Mk3
Launchpad Mini Mk2
Launchpad Pro
Launchpad Mk2
Launchpad S
APC Mini Mk1
APC Mini Mk2
2 in stock $311.06
Click for better price!
or call +44 20 7424 1960
quote 995020
quote 995020
People also bought...
NANO Modules VCV Random CV Generator Module (clock generator/CV modulation/noise/quad/random/sample & hold/slew limiter module)
Cat: 1000135 Rel: 02 Apr 24
Random CV generator module - 10HP
Notes: CV Random is a random CV generator with 4 types of randomness and a triggerable sample-and-hold function.
Sliders allow you to set the internal clock tempo (RATE), shape the probability of triggering (PROB), blend old with new values (RND) and set the shape of all four random outputs (SHAPE).
4 different sliders
RATE
Sets the tempo of the internal clock. The CV input below the slider adjusts the clock rate, with 1V/oct calibration when the CV attenuverter is 100%. Upon each clock trigger, the RATE slider light blinks, and there is a chance for the internal random source to generate a new value.
PROB
This probability is set by the PROB slider, and if a new value was generated, the PROB slider light blinks and a pulse is emitted from the TRIG output.
RND
When the internal random source generates a new value, it mixes the previous value with a random value, with an amount specified by the RND slider.
SHAPE
The SHAPE slider sets the shape of all four random outputs. At its lowest position (0%), all outputs immediately jump to the new random value (the target value) when the clock is triggered.
At non-zero positions, the outputs interpolate between the previous and the target value, using a different behaviour for each output.
Internal random clock source
Whenever the clock activates, the RATE slider's light flashes. At the same time, there's a chance that the internal random source will create a new value, depending on the PROB slider's setting.
If it does create a new value, the PROB slider's light flashes too, and a pulse comes out of the TRIG output.
External IN & TRIG inputs
If the TRIG input is patched, the RATE slider is ignored, and the internal clock is only triggered when an external trigger is received. The PROB slider is used to filter this trigger by applying some probability.
Self-modulation
Thanks to a switch in the back of the module, you can normalize the LIN output to the 4 CV inputs and adjust the amount of modulation for each parameter with the attenuverters.
This adds another layer of randomness to your results, enabling more dynamic and unpredictable outcomes.
SHAPE Outputs
The STEP output jumps to the new value in one step at 0% SHAPE, and divides the transition into 16 steps at 100% SHAPE.
The LIN output immediately reaches the new value at 0% SHAPE, and takes the whole clock cycle to do so at 100% SHAPE, staying constant in between.
The EXP output shifts exponentially, becoming linear at 100% SHAPE, with its pace adjusted by the SHAPE slider.
The SMTH output transitions smoothly, with the speed controlled by the SHAPE setting, holding at the target until the cycle ends.
Specifications
Dimensions 10HP - 50×128,5mm
Current 63 mA +12V / 11 mA -12V / 0 mA +5V
Input & Output Signals +/-10V
Impedance Input 10k - Output 10k
Materials PCB and Panel - FR4 1,6mm
Depth 40mm including connectors (Skiff friendly)
… Read moreSliders allow you to set the internal clock tempo (RATE), shape the probability of triggering (PROB), blend old with new values (RND) and set the shape of all four random outputs (SHAPE).
4 different sliders
RATE
Sets the tempo of the internal clock. The CV input below the slider adjusts the clock rate, with 1V/oct calibration when the CV attenuverter is 100%. Upon each clock trigger, the RATE slider light blinks, and there is a chance for the internal random source to generate a new value.
PROB
This probability is set by the PROB slider, and if a new value was generated, the PROB slider light blinks and a pulse is emitted from the TRIG output.
RND
When the internal random source generates a new value, it mixes the previous value with a random value, with an amount specified by the RND slider.
SHAPE
The SHAPE slider sets the shape of all four random outputs. At its lowest position (0%), all outputs immediately jump to the new random value (the target value) when the clock is triggered.
At non-zero positions, the outputs interpolate between the previous and the target value, using a different behaviour for each output.
Internal random clock source
Whenever the clock activates, the RATE slider's light flashes. At the same time, there's a chance that the internal random source will create a new value, depending on the PROB slider's setting.
If it does create a new value, the PROB slider's light flashes too, and a pulse comes out of the TRIG output.
External IN & TRIG inputs
If the TRIG input is patched, the RATE slider is ignored, and the internal clock is only triggered when an external trigger is received. The PROB slider is used to filter this trigger by applying some probability.
Self-modulation
Thanks to a switch in the back of the module, you can normalize the LIN output to the 4 CV inputs and adjust the amount of modulation for each parameter with the attenuverters.
This adds another layer of randomness to your results, enabling more dynamic and unpredictable outcomes.
SHAPE Outputs
The STEP output jumps to the new value in one step at 0% SHAPE, and divides the transition into 16 steps at 100% SHAPE.
The LIN output immediately reaches the new value at 0% SHAPE, and takes the whole clock cycle to do so at 100% SHAPE, staying constant in between.
The EXP output shifts exponentially, becoming linear at 100% SHAPE, with its pace adjusted by the SHAPE slider.
The SMTH output transitions smoothly, with the speed controlled by the SHAPE setting, holding at the target until the cycle ends.
Specifications
Dimensions 10HP - 50×128,5mm
Current 63 mA +12V / 11 mA -12V / 0 mA +5V
Input & Output Signals +/-10V
Impedance Input 10k - Output 10k
Materials PCB and Panel - FR4 1,6mm
Depth 40mm including connectors (Skiff friendly)
1 in stock $158.64
Click for better price!
or call +44 20 7424 1960
quote 1000135
quote 1000135
People also bought...
Laine Camber 1U Three Pole VC Filter Module (black) (filter module)
Cat: 1007997 Rel: 26 Mar 24
Three pole voltage controlled filter 1U module - 10HP
Notes: An ultra-compact 10HP VC filter with bags of personality. Camber can be treated as a subtle, non-intrusive sound design tool, or something much more lively.
Camber is designed to be a fun, tactile filter with a small footprint. It's sound is neutral enough for basic filtering without a fuss, with a much more aggressive tone available using high resonance settings in three-pole mode.
Filter Core
The core of the filter is based on a state variable topology using 2164 VCAs and 1% tolerance integrating capacitors. Resonance and feedback control is provided by the fantastic circuit design originally by Neil Johnson "Voltage Controlled 3-Pole State Variable Filter" recently made available in Sound Semiconductor documentation.
Operation
Camber is switchable between low pass and high pass responses with one pole (6dB) and three pole (18dB) flavours of each. It has full CV control of both cutoff frequency and resonance amount. The input is DC-coupled allowing LFO and CV signals to be routed through the filter. The filter will also act as a simple oscillator producing a clean sinusoidal signal with the resonance control turned *almost fully clockwise, and no signal at the audio input. Dialling in the resonance so that it is just under the point of self-oscillation allows the filter to be "Pinged" by sending gate signals to the audio input. This is useful for tuned percussion sounds and FX.
Specifications
Intellijel 1u format
Width 10HP
Depth 33mm
Power requirements ~40mA +12V/~40mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K
… Read moreCamber is designed to be a fun, tactile filter with a small footprint. It's sound is neutral enough for basic filtering without a fuss, with a much more aggressive tone available using high resonance settings in three-pole mode.
Filter Core
The core of the filter is based on a state variable topology using 2164 VCAs and 1% tolerance integrating capacitors. Resonance and feedback control is provided by the fantastic circuit design originally by Neil Johnson "Voltage Controlled 3-Pole State Variable Filter" recently made available in Sound Semiconductor documentation.
Operation
Camber is switchable between low pass and high pass responses with one pole (6dB) and three pole (18dB) flavours of each. It has full CV control of both cutoff frequency and resonance amount. The input is DC-coupled allowing LFO and CV signals to be routed through the filter. The filter will also act as a simple oscillator producing a clean sinusoidal signal with the resonance control turned *almost fully clockwise, and no signal at the audio input. Dialling in the resonance so that it is just under the point of self-oscillation allows the filter to be "Pinged" by sending gate signals to the audio input. This is useful for tuned percussion sounds and FX.
Specifications
Intellijel 1u format
Width 10HP
Depth 33mm
Power requirements ~40mA +12V/~40mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K
1 in stock $138.94
Click for better price!
or call +44 20 7424 1960
quote 1007997
quote 1007997
People also bought...
Laine Stilts 1U Dual VC Tilt Equaliser Module (silver) (dual/stereo/equaliser/filter module)
Cat: 1008000 Rel: 25 Mar 24
Dual voltage controlled tilt equaliser 1U module - 18HP
Notes: Lush analogue EQ switchable between tilt and Baxandall high-shelf configurations.
Perform a variety of mixing and sound design duties ranging from subtle brightness and clarity adjustments to low-end rumble removal, boosted low-pass filtering and sweep EQ.
In the default tilt mode, turning the control knob clockwise simultaneously boosts treble and cuts bass. Turning anti-clockwise boosts bass and cuts treble. These boosts and cuts are pivoted around the mid-range. With the control knob at 12 o'clock the frequency response is neutral.
With Baxandall high-shelf mode enabled, turning the control knob clockwise past 12 o'clock introduces and gentle high-shelf EQ weighted around the upper mid-range. Turning the control knob anti-clockwise results in a wide high-shelf cut with subtle bass and mid-range adjustments.
Patching the channels in series allows for radical sound shaping and band-pass responses. Each channel provides up to +/- 8db of low and high-frequency gain control, summing into a low noise output stage. Hot input signals over 15vpp are saturated by active Zener diode clipping.
Features
Precise voltage control of EQ tilt and shelf
Seamless switching between EQ modes
High-quality components used throughout
Specifications
Intellijel 1U format
Width 18HP
Depth 32mm
Power requirements ~60mA +12V/~58mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K
… Read morePerform a variety of mixing and sound design duties ranging from subtle brightness and clarity adjustments to low-end rumble removal, boosted low-pass filtering and sweep EQ.
In the default tilt mode, turning the control knob clockwise simultaneously boosts treble and cuts bass. Turning anti-clockwise boosts bass and cuts treble. These boosts and cuts are pivoted around the mid-range. With the control knob at 12 o'clock the frequency response is neutral.
With Baxandall high-shelf mode enabled, turning the control knob clockwise past 12 o'clock introduces and gentle high-shelf EQ weighted around the upper mid-range. Turning the control knob anti-clockwise results in a wide high-shelf cut with subtle bass and mid-range adjustments.
Patching the channels in series allows for radical sound shaping and band-pass responses. Each channel provides up to +/- 8db of low and high-frequency gain control, summing into a low noise output stage. Hot input signals over 15vpp are saturated by active Zener diode clipping.
Features
Precise voltage control of EQ tilt and shelf
Seamless switching between EQ modes
High-quality components used throughout
Specifications
Intellijel 1U format
Width 18HP
Depth 32mm
Power requirements ~60mA +12V/~58mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K
1 in stock $170.83
Click for better price!
or call +44 20 7424 1960
quote 1008000
quote 1008000
People also bought...
Noise Engineering Opp Ned 4-Channel Arpeggiator Module (silver) (quad/sequencer/utility module)
Cat: 1007469 Rel: 28 Mar 24
Arpeggiator module with four outputs & CV-able scales - 8HP
Notes: Four-channel arpeggiator with customizable patterns and CV control
Opp Ned is a four-channel arpeggiator designed for creating patterns that can be modified with CV. Opp Ned ships with 12 of Nosie Engineering's favourite arps, including tetrads, major, pentatonic major, minor third, and pentatonic minor, but you can edit and save custom arpeggios to twelve memory slots. Recall your custom arpeggios manually or with CV using the Ptn input. If you ever want to restore the factory arps, just head to the Noise Engineering Customer Portal.
The transpose input makes it easy to combine Opp Ned with external sequencers, too!
Arps have never been easier than with Opp Ned.
Features
Size and Power
8HP Eurorack
+12v: 60mA
-12v: 10mA
Opp from Norwegian Opp for "Up"
Ned from Norwegian Ned "down"
"Ups and downs"
What's in the box
Module
Power cable
*** Noise Engineering no longer include screws with newly packaged modules. Bulk screws are available for purchase. ***
… Read moreOpp Ned is a four-channel arpeggiator designed for creating patterns that can be modified with CV. Opp Ned ships with 12 of Nosie Engineering's favourite arps, including tetrads, major, pentatonic major, minor third, and pentatonic minor, but you can edit and save custom arpeggios to twelve memory slots. Recall your custom arpeggios manually or with CV using the Ptn input. If you ever want to restore the factory arps, just head to the Noise Engineering Customer Portal.
The transpose input makes it easy to combine Opp Ned with external sequencers, too!
Arps have never been easier than with Opp Ned.
Features
Size and Power
8HP Eurorack
+12v: 60mA
-12v: 10mA
Opp from Norwegian Opp for "Up"
Ned from Norwegian Ned "down"
"Ups and downs"
What's in the box
Module
Power cable
*** Noise Engineering no longer include screws with newly packaged modules. Bulk screws are available for purchase. ***
1 in stock $336.99
Click for better price!
or call +44 20 7424 1960
quote 1007469
quote 1007469
People also bought...
Laine Camber 1U Three Pole VC Filter Module (silver) (filter module)
Cat: 1007996 Rel: 26 Mar 24
Three pole voltage controlled filter 1U module - 10HP
Notes: An ultra-compact 10HP VC filter with bags of personality. Camber can be treated as a subtle, non-intrusive sound design tool, or something much more lively.
Camber is designed to be a fun, tactile filter with a small footprint. It's sound is neutral enough for basic filtering without a fuss, with a much more aggressive tone available using high resonance settings in three-pole mode.
Filter Core
The core of the filter is based on a state variable topology using 2164 VCAs and 1% tolerance integrating capacitors. Resonance and feedback control is provided by the fantastic circuit design originally by Neil Johnson "Voltage Controlled 3-Pole State Variable Filter" recently made available in Sound Semiconductor documentation.
Operation
Camber is switchable between low pass and high pass responses with one pole (6dB) and three pole (18dB) flavours of each. It has full CV control of both cutoff frequency and resonance amount. The input is DC-coupled allowing LFO and CV signals to be routed through the filter. The filter will also act as a simple oscillator producing a clean sinusoidal signal with the resonance control turned *almost fully clockwise, and no signal at the audio input. Dialling in the resonance so that it is just under the point of self-oscillation allows the filter to be "Pinged" by sending gate signals to the audio input. This is useful for tuned percussion sounds and FX.
Specifications
Intellijel 1u format
Width 10HP
Depth 33mm
Power requirements ~40mA +12V/~40mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K
… Read moreCamber is designed to be a fun, tactile filter with a small footprint. It's sound is neutral enough for basic filtering without a fuss, with a much more aggressive tone available using high resonance settings in three-pole mode.
Filter Core
The core of the filter is based on a state variable topology using 2164 VCAs and 1% tolerance integrating capacitors. Resonance and feedback control is provided by the fantastic circuit design originally by Neil Johnson "Voltage Controlled 3-Pole State Variable Filter" recently made available in Sound Semiconductor documentation.
Operation
Camber is switchable between low pass and high pass responses with one pole (6dB) and three pole (18dB) flavours of each. It has full CV control of both cutoff frequency and resonance amount. The input is DC-coupled allowing LFO and CV signals to be routed through the filter. The filter will also act as a simple oscillator producing a clean sinusoidal signal with the resonance control turned *almost fully clockwise, and no signal at the audio input. Dialling in the resonance so that it is just under the point of self-oscillation allows the filter to be "Pinged" by sending gate signals to the audio input. This is useful for tuned percussion sounds and FX.
Specifications
Intellijel 1u format
Width 10HP
Depth 33mm
Power requirements ~40mA +12V/~40mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K
1 in stock $138.94
Click for better price!
or call +44 20 7424 1960
quote 1007996
quote 1007996
People also bought...
Laine Tilt 1U Wide Tone Adjustment Module With One Control (black) (equaliser/filter module)
Cat: 1007999 Rel: 26 Mar 24
Wide tone adjustment 1U module with one control - 8HP
Notes: Tilt is the first in Laine's series of core modules, which will take cues from the main product line and strip back the features so both the module width and cost can be shrunk dramatically.
Comprising an 'Ambler' style tilt EQ network similar to the 'Stilts' topology, Tilt allows simultaneous cut and boost of low and high frequencies using a single control.
Tilt control circuits are known for the transparency of their cut and boost curves, coupled with the inherent emphasis gained from cutting one end of the frequency spectrum whilst boosting at the opposite end.
It sounds pretty good on all audio source material but is especially suited to tracking drums, guitar and lead, or manipulating effects sends and returns.
With the control knob at 12o'clock the sound passed is neutral. Turning the control knob clockwise will boost high and cut low frequencies pivoting from a fixed mid-range point. Turning the control anti-clockwise below 12 o clock will in turn boost low frequencies and cut the highs.
In addition to the EQ there is a soft clipping network which will begin to saturate signals over 15 volts peak to peak.
Tilt uses the same high quality OPA op amps, Alpha pots and ENIG PCBs as found in our main product line.
Features
Compact EQ tilt control in 1U
Soft clipping network
High-quality components used throughout
Specifications
Intellijel 1U format
Width 8HP
Depth 28mm
Power requirements ~10mA +12V/~10mA -12V
Impedance Input 100k / Output 1k
… Read moreComprising an 'Ambler' style tilt EQ network similar to the 'Stilts' topology, Tilt allows simultaneous cut and boost of low and high frequencies using a single control.
Tilt control circuits are known for the transparency of their cut and boost curves, coupled with the inherent emphasis gained from cutting one end of the frequency spectrum whilst boosting at the opposite end.
It sounds pretty good on all audio source material but is especially suited to tracking drums, guitar and lead, or manipulating effects sends and returns.
With the control knob at 12o'clock the sound passed is neutral. Turning the control knob clockwise will boost high and cut low frequencies pivoting from a fixed mid-range point. Turning the control anti-clockwise below 12 o clock will in turn boost low frequencies and cut the highs.
In addition to the EQ there is a soft clipping network which will begin to saturate signals over 15 volts peak to peak.
Tilt uses the same high quality OPA op amps, Alpha pots and ENIG PCBs as found in our main product line.
Features
Compact EQ tilt control in 1U
Soft clipping network
High-quality components used throughout
Specifications
Intellijel 1U format
Width 8HP
Depth 28mm
Power requirements ~10mA +12V/~10mA -12V
Impedance Input 100k / Output 1k
1 in stock $50.56
Click for better price!
or call +44 20 7424 1960
quote 1007999
quote 1007999
FORTHCOMING
Related products...
Patching Panda Punch MG Quad VCA-Decay & Mute Group Module (black) (dynamics/envelope generator/mixer/quad/utility/VCA synth module)
Cat: 963504
4x VCA-decay & mute group module - 16HP.
Notes: Punch MG is a unique module with VCA-DECAY & Mute GROUP designed for Eurorack systems.
This module has been specially crafted to generate dynamic percussive sounds while also offering the capability to manage multiple signals simultaneously through its innovative mute group feature.
Punch MG provides a versatile platform for crafting dynamic percussive sounds. With its mute group feature, it allows you to handle numerous signals concurrently.
The manual will guide you through the various features and functions of Punch MG, enabling you to explore its full potential.
Key Features:
Dynamic Sound Generation: Punch MG is engineered to generate dynamic percussive sounds with finesse, offering a range of creative possibilities.
Mute Group Interaction and Signal Patterning: Utilize the mute group feature to enable interactions between signals that share the same group.
This feature enables signal muting and amplitude limitation when multiple signals are triggered simultaneously. The amplitude and decay time of each signal are influenced by others in the same group. This characteristic can lead to captivating pattern variations when focusing on specific channels.
Expandable Capability: By linking two modules, you can expand the effect of the mute group to accommodate up to eight signals, fostering intricate interactions and captivating sonic landscapes.
AM Sound Creation: Connect audio rate signals to the level input to explore the creation of AM (Amplitude Modulation) sounds, further extending the sound design possibilities.
Envelope outs: Each envelope's polarity can be inverted using dedicated switches on the front panel, enabling you to achieve effects like side-chain compression and ducking. Moreover, the mute group circuit's influence extends to the envelope signal output, providing intriguing modulation capabilities that add a unique layer of creative expression to your sonic endeavours.
16 HP
Power consumption 180mA@+12V, 64mA@-12V
… Read moreThis module has been specially crafted to generate dynamic percussive sounds while also offering the capability to manage multiple signals simultaneously through its innovative mute group feature.
Punch MG provides a versatile platform for crafting dynamic percussive sounds. With its mute group feature, it allows you to handle numerous signals concurrently.
The manual will guide you through the various features and functions of Punch MG, enabling you to explore its full potential.
Key Features:
Dynamic Sound Generation: Punch MG is engineered to generate dynamic percussive sounds with finesse, offering a range of creative possibilities.
Mute Group Interaction and Signal Patterning: Utilize the mute group feature to enable interactions between signals that share the same group.
This feature enables signal muting and amplitude limitation when multiple signals are triggered simultaneously. The amplitude and decay time of each signal are influenced by others in the same group. This characteristic can lead to captivating pattern variations when focusing on specific channels.
Expandable Capability: By linking two modules, you can expand the effect of the mute group to accommodate up to eight signals, fostering intricate interactions and captivating sonic landscapes.
AM Sound Creation: Connect audio rate signals to the level input to explore the creation of AM (Amplitude Modulation) sounds, further extending the sound design possibilities.
Envelope outs: Each envelope's polarity can be inverted using dedicated switches on the front panel, enabling you to achieve effects like side-chain compression and ducking. Moreover, the mute group circuit's influence extends to the envelope signal output, providing intriguing modulation capabilities that add a unique layer of creative expression to your sonic endeavours.
16 HP
Power consumption 180mA@+12V, 64mA@-12V
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $267.52
(No payment required now - pay when released)
FORTHCOMING
Related products...
Patching Panda Punch MG Quad VCA-Decay & Mute Group Module (silver) (dynamics/envelope generator/mixer/quad/utility/VCA synth module)
Cat: 963505
4x VCA-decay & mute group module - 16HP.
Notes: Punch MG is a unique module with VCA-DECAY & Mute GROUP designed for Eurorack systems.
This module has been specially crafted to generate dynamic percussive sounds while also offering the capability to manage multiple signals simultaneously through its innovative mute group feature.
Punch MG provides a versatile platform for crafting dynamic percussive sounds. With its mute group feature, it allows you to handle numerous signals concurrently.
The manual will guide you through the various features and functions of Punch MG, enabling you to explore its full potential.
Key Features:
Dynamic Sound Generation: Punch MG is engineered to generate dynamic percussive sounds with finesse, offering a range of creative possibilities.
Mute Group Interaction and Signal Patterning: Utilize the mute group feature to enable interactions between signals that share the same group.
This feature enables signal muting and amplitude limitation when multiple signals are triggered simultaneously. The amplitude and decay time of each signal are influenced by others in the same group. This characteristic can lead to captivating pattern variations when focusing on specific channels.
Expandable Capability: By linking two modules, you can expand the effect of the mute group to accommodate up to eight signals, fostering intricate interactions and captivating sonic landscapes.
AM Sound Creation: Connect audio rate signals to the level input to explore the creation of AM (Amplitude Modulation) sounds, further extending the sound design possibilities.
Envelope outs: Each envelope's polarity can be inverted using dedicated switches on the front panel, enabling you to achieve effects like side-chain compression and ducking. Moreover, the mute group circuit's influence extends to the envelope signal output, providing intriguing modulation capabilities that add a unique layer of creative expression to your sonic endeavours.
16 HP
Power consumption 180mA@+12V, 64mA@-12V
… Read moreThis module has been specially crafted to generate dynamic percussive sounds while also offering the capability to manage multiple signals simultaneously through its innovative mute group feature.
Punch MG provides a versatile platform for crafting dynamic percussive sounds. With its mute group feature, it allows you to handle numerous signals concurrently.
The manual will guide you through the various features and functions of Punch MG, enabling you to explore its full potential.
Key Features:
Dynamic Sound Generation: Punch MG is engineered to generate dynamic percussive sounds with finesse, offering a range of creative possibilities.
Mute Group Interaction and Signal Patterning: Utilize the mute group feature to enable interactions between signals that share the same group.
This feature enables signal muting and amplitude limitation when multiple signals are triggered simultaneously. The amplitude and decay time of each signal are influenced by others in the same group. This characteristic can lead to captivating pattern variations when focusing on specific channels.
Expandable Capability: By linking two modules, you can expand the effect of the mute group to accommodate up to eight signals, fostering intricate interactions and captivating sonic landscapes.
AM Sound Creation: Connect audio rate signals to the level input to explore the creation of AM (Amplitude Modulation) sounds, further extending the sound design possibilities.
Envelope outs: Each envelope's polarity can be inverted using dedicated switches on the front panel, enabling you to achieve effects like side-chain compression and ducking. Moreover, the mute group circuit's influence extends to the envelope signal output, providing intriguing modulation capabilities that add a unique layer of creative expression to your sonic endeavours.
16 HP
Power consumption 180mA@+12V, 64mA@-12V
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $267.52
(No payment required now - pay when released)
People also bought...
Befaco Pony VCF Lowpass Filter & Volume Processor Module (filter/mixer/VCA module)
Cat: 1005993 Rel: 27 Mar 24
Lowpass filter & volume processor module - 6HP
Notes: Space-conscious lowpass filter and volume processor.
A combination of VCF + VCA + Mixer that lets you mix three different sound sources, and shape their tone, and levels in a breeze.
The Pony Filter is built around the SSI2144 FATKEYS Chip. Has the elegant sound of the classic transistor filter without the associated distortions, due to Dave Rossum's "improved ladder" topology.
Features
3 Channel Mixer (Out normalized to channel three for feedback)
Temperature-compensated Q and frequency.
Compensated Volume VS Resonance
2 Cuttof CV INs.
CV 1 Selectable routing Cut-Off or Cut-Off+VCA
Voltage controlled Q
Two Segment Peak Meter
Specifications
Four-pole, 24 dB/octave
Current needs: +12V=50mA, -12V=45mA
Width: 6 HP
Depth Assembled Version: 22mm
Depth DIY Kit Version: 40mm
Designed, kits prepared and assembled in Barcelona.
… Read moreA combination of VCF + VCA + Mixer that lets you mix three different sound sources, and shape their tone, and levels in a breeze.
The Pony Filter is built around the SSI2144 FATKEYS Chip. Has the elegant sound of the classic transistor filter without the associated distortions, due to Dave Rossum's "improved ladder" topology.
Features
3 Channel Mixer (Out normalized to channel three for feedback)
Temperature-compensated Q and frequency.
Compensated Volume VS Resonance
2 Cuttof CV INs.
CV 1 Selectable routing Cut-Off or Cut-Off+VCA
Voltage controlled Q
Two Segment Peak Meter
Specifications
Four-pole, 24 dB/octave
Current needs: +12V=50mA, -12V=45mA
Width: 6 HP
Depth Assembled Version: 22mm
Depth DIY Kit Version: 40mm
Designed, kits prepared and assembled in Barcelona.
1 in stock $183.01
Click for better price!
or call +44 20 7424 1960
quote 1005993
quote 1005993
People also bought...
Laine Stilts 1U Dual VC Tilt Equaliser Module (black) (dual/stereo/equaliser/filter module)
Cat: 1008003 Rel: 26 Mar 24
Dual voltage controlled tilt equaliser 1U module - 18HP
Notes: Lush analogue EQ switchable between tilt and Baxandall high-shelf configurations.
Perform a variety of mixing and sound design duties ranging from subtle brightness and clarity adjustments to low-end rumble removal, boosted low-pass filtering and sweep EQ.
In the default tilt mode, turning the control knob clockwise simultaneously boosts treble and cuts bass. Turning anti-clockwise boosts bass and cuts treble. These boosts and cuts are pivoted around the mid-range. With the control knob at 12 o'clock the frequency response is neutral.
With Baxandall high-shelf mode enabled, turning the control knob clockwise past 12 o'clock introduces and gentle high-shelf EQ weighted around the upper mid-range. Turning the control knob anti-clockwise results in a wide high-shelf cut with subtle bass and mid-range adjustments.
Patching the channels in series allows for radical sound shaping and band-pass responses. Each channel provides up to +/- 8db of low and high-frequency gain control, summing into a low noise output stage. Hot input signals over 15vpp are saturated by active Zener diode clipping.
Features
Precise voltage control of EQ tilt and shelf
Seamless switching between EQ modes
High-quality components used throughout
Specifications
Intellijel 1U format
Width: 18HP
Depth: 32mm
Power requirements: ~60mA +12V/~58mA -12V
Control voltage range: 0-8V
Impedance Input: 100K / Output 1K
… Read morePerform a variety of mixing and sound design duties ranging from subtle brightness and clarity adjustments to low-end rumble removal, boosted low-pass filtering and sweep EQ.
In the default tilt mode, turning the control knob clockwise simultaneously boosts treble and cuts bass. Turning anti-clockwise boosts bass and cuts treble. These boosts and cuts are pivoted around the mid-range. With the control knob at 12 o'clock the frequency response is neutral.
With Baxandall high-shelf mode enabled, turning the control knob clockwise past 12 o'clock introduces and gentle high-shelf EQ weighted around the upper mid-range. Turning the control knob anti-clockwise results in a wide high-shelf cut with subtle bass and mid-range adjustments.
Patching the channels in series allows for radical sound shaping and band-pass responses. Each channel provides up to +/- 8db of low and high-frequency gain control, summing into a low noise output stage. Hot input signals over 15vpp are saturated by active Zener diode clipping.
Features
Precise voltage control of EQ tilt and shelf
Seamless switching between EQ modes
High-quality components used throughout
Specifications
Intellijel 1U format
Width: 18HP
Depth: 32mm
Power requirements: ~60mA +12V/~58mA -12V
Control voltage range: 0-8V
Impedance Input: 100K / Output 1K
1 in stock $170.83
Click for better price!
or call +44 20 7424 1960
quote 1008003
quote 1008003
People also bought...
Noise Engineering Opp Ned 4-Channel Arpeggiator Module (black) (quad/sequencer/utility module)
Cat: 1007462 Rel: 28 Mar 24
Arpeggiator module with four outputs & CV-able scales - 8HP
Notes: Really nice take on an arpeggiator module here. Four-channel design features editable arpeggio patterns, CV control and transposition. Real-time performance meets customisable melody generation.
Supplier's Notes:
Four-channel arpeggiator with customizable patterns and CV control
Opp Ned is a four-channel arpeggiator designed for creating patterns that can be modified with CV. Opp Ned ships with 12 of Noise Engineering's favourite arps, including tetrads, major, pentatonic major, minor third, and pentatonic minor, but you can edit and save custom arpeggios to twelve memory slots. Recall your custom arpeggios manually or with CV using the Ptn input. If you ever want to restore the factory arps, just head to the Noise Engineering Customer Portal.
The transpose input makes it easy to combine Opp Ned with external sequencers, too!
Arps have never been easier than with Opp Ned.
Features
Size and Power
8HP Eurorack
+12v: 60mA
-12v: 10mA
Opp from Norwegian Opp for "Up"
Ned from Norwegian Ned "down"
"Ups and downs"
What's in the box
Module
Power cable
*** Noise Engineering no longer include screws with newly packaged modules. Bulk screws are available for purchase. ***
… Read moreSupplier's Notes:
Four-channel arpeggiator with customizable patterns and CV control
Opp Ned is a four-channel arpeggiator designed for creating patterns that can be modified with CV. Opp Ned ships with 12 of Noise Engineering's favourite arps, including tetrads, major, pentatonic major, minor third, and pentatonic minor, but you can edit and save custom arpeggios to twelve memory slots. Recall your custom arpeggios manually or with CV using the Ptn input. If you ever want to restore the factory arps, just head to the Noise Engineering Customer Portal.
The transpose input makes it easy to combine Opp Ned with external sequencers, too!
Arps have never been easier than with Opp Ned.
Features
Size and Power
8HP Eurorack
+12v: 60mA
-12v: 10mA
Opp from Norwegian Opp for "Up"
Ned from Norwegian Ned "down"
"Ups and downs"
What's in the box
Module
Power cable
*** Noise Engineering no longer include screws with newly packaged modules. Bulk screws are available for purchase. ***
1 in stock $329.73
Click for better price!
or call +44 20 7424 1960
quote 1007462
quote 1007462
People also bought...
WMD Digital VCA MKIII Dual Zero-Crossing VCA & Polariser Module (polariser/ring modulator/sample & hold/VCA module)
Cat: 1008017 Rel: 27 Mar 24
Dual digital VCA module with zero crossing detection, polarisation, noise, sample & hold - 8HP
Notes: Another update for WMD's clever dual VCA, this time a little bigger to give more control. Digital control of CV and attenuation gives lots of creative options. Third time's a charm.
Supplier's Notes:
WMD have done several designs of this circuit over the years, the first one had no knobs, the second was too small, the MKIII is finally how this circuit should be packaged. This module does some really cool stuff and is super useful in any system.
The Digital VCA lets signal through like a normal VCA, but the CV and attenuation level is controlled digitally. This lets us do things like wait until there is a zero crossing to change the amplitude, resulting in clickless amplitude changes.
The Trigger mode causes the VCA to only update when a trigger is received. The addition of a noise circuit for each side let us do a very quick and easy sample and hold that never droops. With no input, 5V is normaled to the attenuator, so you get a 0-5V sample and hold. In Bipolar mode, you can get -5 to +5V.
Both sides have bipolar VCA mode (polarizer), which lets them invert the signal when negative CV comes in. Also known as ring modulation. With the zero crossing detector, this can produce some super wild wave shapes.
Features
Dual VCA Design
Unipolar or Bipolar Operation
DC Coupled Analogue Signal Path
Low Distortion / Low Noise
VCA Closes Completely
Zero Crossing Detector Mode
Trigger Mode
Two Independent Noise Sources
8 bit CV resolution
Great for Fast Envelopes and Sine Bass Sounds
Specifications
Power: +65mA, -45mA
Width: 8HP
Depth: 35mm with cables
Height: Eurorack 3U (128.5mm)
Board Height Behind Panel: 112mm
CV/Signal Input Impedance: 100k
Output Impedance: 1k
UPD in 3.3V Threshold Schmitt Trigger
ZCD produces 15us 5V pulse
5V CV to fully open VCA
Linear VCA response
20Vpp signal handling
… Read moreSupplier's Notes:
WMD have done several designs of this circuit over the years, the first one had no knobs, the second was too small, the MKIII is finally how this circuit should be packaged. This module does some really cool stuff and is super useful in any system.
The Digital VCA lets signal through like a normal VCA, but the CV and attenuation level is controlled digitally. This lets us do things like wait until there is a zero crossing to change the amplitude, resulting in clickless amplitude changes.
The Trigger mode causes the VCA to only update when a trigger is received. The addition of a noise circuit for each side let us do a very quick and easy sample and hold that never droops. With no input, 5V is normaled to the attenuator, so you get a 0-5V sample and hold. In Bipolar mode, you can get -5 to +5V.
Both sides have bipolar VCA mode (polarizer), which lets them invert the signal when negative CV comes in. Also known as ring modulation. With the zero crossing detector, this can produce some super wild wave shapes.
Features
Dual VCA Design
Unipolar or Bipolar Operation
DC Coupled Analogue Signal Path
Low Distortion / Low Noise
VCA Closes Completely
Zero Crossing Detector Mode
Trigger Mode
Two Independent Noise Sources
8 bit CV resolution
Great for Fast Envelopes and Sine Bass Sounds
Specifications
Power: +65mA, -45mA
Width: 8HP
Depth: 35mm with cables
Height: Eurorack 3U (128.5mm)
Board Height Behind Panel: 112mm
CV/Signal Input Impedance: 100k
Output Impedance: 1k
UPD in 3.3V Threshold Schmitt Trigger
ZCD produces 15us 5V pulse
5V CV to fully open VCA
Linear VCA response
20Vpp signal handling
1 in stock $233.29
Click for better price!
or call +44 20 7424 1960
quote 1008017
quote 1008017
FORTHCOMING
Related products...
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $113.02
(No payment required now - pay when released)
People also bought...
Frequency Central Akropoli Advanced Generative Sequencer Module (clock generator/comparator/logic/sequencer module)
Cat: 997141 Rel: 19 Mar 24
Generative CV sequencer & 4-channel clock divider module - 16HP
Notes: Advanced generative sequencer featuring mutes per channel and transposition facilities.
Akropoli is an extension and enhancement of our successful Little Melody and High Towers modules, offering the features of both of these modules as well as some of it's own unique features such as mute buttons per channel, manual transpose knob and 1V/oct transpose CV input. Akropoli operates using Frequency Central's proprietary TOOL V2 code, and can count in integers as well as multiples for even more subtle and evolving variations.
Akropoli is a generative sequencer based around clock divisions and a chromatic quantiser, used to create in-the-moment licks and riffs. It is more that the sum of it's parts.
Akropoli's internal operations can be considered as 4 clock dividers patched into a CV mixer via attenuators. The attenuators select notes over a 5 octave range, the clock dividers determine how often those notes are added to the mix. The final output of Akropoli is quantized chromatically for fast set up and continuously pleasing results. Akropoli has an onboard transposition knob, as well as a 1V/oct transposition CV input.
The 4 clock dividers are labelled A, B, C, and D. They all receive clocks from the same source, the divisions may be selected using the presets and the individual division selectors. The clock dividers can be set to count up, down, or to one of a variety of modes that move between counting up and down. For further information on Presets and Modes see the Little Melody User Guide.
Additionally, each clock divider has it's own binary output (either high or low), these 4 outputs can be used to clock/gate/trigger other stuff on other modules to great effect.
Product Specifications
12V draw
50mA
-12V draw
36mA
5V draw
0mA
Depth
35mm
… Read moreAkropoli is an extension and enhancement of our successful Little Melody and High Towers modules, offering the features of both of these modules as well as some of it's own unique features such as mute buttons per channel, manual transpose knob and 1V/oct transpose CV input. Akropoli operates using Frequency Central's proprietary TOOL V2 code, and can count in integers as well as multiples for even more subtle and evolving variations.
Akropoli is a generative sequencer based around clock divisions and a chromatic quantiser, used to create in-the-moment licks and riffs. It is more that the sum of it's parts.
Akropoli's internal operations can be considered as 4 clock dividers patched into a CV mixer via attenuators. The attenuators select notes over a 5 octave range, the clock dividers determine how often those notes are added to the mix. The final output of Akropoli is quantized chromatically for fast set up and continuously pleasing results. Akropoli has an onboard transposition knob, as well as a 1V/oct transposition CV input.
The 4 clock dividers are labelled A, B, C, and D. They all receive clocks from the same source, the divisions may be selected using the presets and the individual division selectors. The clock dividers can be set to count up, down, or to one of a variety of modes that move between counting up and down. For further information on Presets and Modes see the Little Melody User Guide.
Additionally, each clock divider has it's own binary output (either high or low), these 4 outputs can be used to clock/gate/trigger other stuff on other modules to great effect.
Product Specifications
12V draw
50mA
-12V draw
36mA
5V draw
0mA
Depth
35mm
1 in stock $258.18
Click for better price!
or call +44 20 7424 1960
quote 997141
quote 997141
