100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 1,360 on page 1 of 28
1  2  3  ...  28  »
Cat: 660457 Rel: 29 Aug 17
 
10HP Eurorack module generating warm, lush chorus & vibrato effects
Notes: An instant classic just like the pedal with sparkly compression sweeping through lush dreamy chorus to the hypnotic vibrato of low-fidelity warped vinyl-like goodness.

Controls are:

- Knobs and CV ins for Compression/LoFi vibrato mix, Speed, Depth, and Dry-Wet
- Three selectable wave shapes and CV in for modulation control

This module was designed to emulate the sounds and textures of the Lo-Fi Loop Junky in real time, but it goes far beyond that. Click it on and mix your sparkly clear compressed signal with the smashed, lo-fidelity warbled signal and listen to it become a luscious emulsification that can be blended to the most perfect depth. Achieve new haunting chorus sounds and pulsating vibrato. Unusual and fun, you've never heard anything quite like it.
Read more
 1 in stock $309.47
Cat: 749780 Rel: 29 Aug 17
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


You've been waiting all your life for the ZVEX Fuzz Factory Eurorack module. Over the years there have been many requests from the synth community for a Fuzz Factory that would behave the same way for them as the Fuzz Factory does for guitarists. The self oscillation, the gating, the gooey, sticky fuzz, all of that strange wonderful interactive excitement has arrived in this incredibly controllable box of mayhem...

Basic controls include:

- Three position range switch settings of 0db, -20db, and -40db, critical for fixing the operating level
- Knobs and CV ins for the standard Fuzz Factory controls Gate, Comp, Drive, and Stab
- New knobs and CV ins for Input Level, Input Impedance, Fatness and Dry/Wet mix
Read more
 1 in stock $331.56
Cat: 660454 Rel: 29 Aug 17
 
14HP Eurorack fuzz & overdrive synth module
Notes: You've been waiting all your life for the ZVEX Fuzz Factory Eurorack module. Over the years there have been many requests from the synth community for a Fuzz Factory that would behave the same way for them as the Fuzz Factory does for guitarists. The self oscillation, the gating, the gooey, sticky fuzz, all of that strange wonderful interactive excitement has arrived in this incredibly controllable box of mayhem...

Basic controls include:

- Three position range switch settings of 0db, -20db, and -40db, critical for fixing the operating level
- Knobs and CV ins for the standard Fuzz Factory controls Gate, Comp, Drive, and Stab
- New knobs and CV ins for Input Level, Input Impedance, Fatness and Dry/Wet mix
Read more
 1 in stock $359.24
Cat: 689804 Rel: 03 Sep 18
 
Innovative quad envelope - 10HP
Notes: Zadar is a powerful, four-channel envelope, modulation, and transient generator, in a compact yet very complete, feature-rich package. It is capable of synthesising a vast palette of envelope shapes starting from hundreds of shapes stored in the memory. These starting shapes are not mere wavetables, but flexible vectors that can be stretched (from a fraction of a millisecond to half an hour), flipped, warped, distorted, delayed, shuffled, repeated, and amplitude modulated in real time. A set of freely assignable CV inputs allows for external control of most parameters. Each channel can work independently or combined with other channels within one of the chaining and looping algorithms.

Operating Zadar is quick and immediate, thanks to its accessible interface and crisp OLED display. The main screen displays all parameters together with the currently selected shape. Entering the simple 3-page menu is needed only for advanced settings.
Read more
 4 in stock $280.25
Cat: 633370 Rel: 28 Nov 16
 
Voltage distributor synth utility module
Notes: Warna is a very useful utility module that helps you to manage control voltages in the system. Crammed in just 6 hp, there are five normalled sections: two buffered mults, two inverters, and a summing mixer. Each multiple routes the input signal to separated outputs without loss in voltage. Warna is designed for unity gain - if you apply a specific voltage to any input, it remains the same on the respective outputs. Inverters are hardwired to mults and invert the polarity of the signal applied to them. Both mults are also normalled to the mixer section via inputs. Patching anything to these inputs breaks the normalization.

The top and the bottom section both are buffered 1-in-4 multiples. The input can be inverted with a switch, i.e. its polarity will be changed by 180 degrees. Four inverted copies are then available at the outputs, meaning you can use these two sections as inverter. Bi-polar LEDs display whether the signal is positive or negative: yellow = negative, red = positive. The centre section is a four-input summing stage with amplification factor 1, a so-called unity-gain mixer. The multiples are normalized to the mixer which can be deactivated by patching.
Read more
 2 in stock $83.31
Cat: 739163 Rel: 21 Jul 17
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Tirana is a super-compact step sequencer and modulation source, serving as the utility module for supporting other sequencing devices, but due to a suite of smart features, the module shines on its own terms. Tirana sports unipolar and bipolar voltages, mutable step triggering, transposition, and direction change controlled externally via CV. The step repeat function and virtually infinite expandability make it even more powerful.
Read more
 1 in stock $150.03
Cat: 657758 Rel: 21 Jul 17
 
Compact step sequencer & modulation source module - 6HP
Notes: Tirana is a super-compact step sequencer and modulation source, serving as the utility module for supporting other sequencing devices, but due to a suite of smart features, the module shines on its own terms. Tirana sports unipolar and bipolar voltages, mutable step triggering, transposition, and direction change controlled externally via CV. The step repeat function and virtually infinite expandability make it even more powerful.
Read more
 2 in stock $170.96
Cat: 671740 Rel: 04 Dec 17
 
Dual voltage control amplifier & overdrive - 6HP
Notes: Tallin is a dual voltage controlled amplifier (VCA) with overdrive, offering some unusual control features and a range of attractive tonal characteristics. Each of the two identical channels offers two simultaneously available inputs for voltage control over signal attenuation or gain, with linear and exponential response to CV. Volume control knobs offer manual gain settings ranging from fully closed (-80dB) up to +18dB. A colour LED indicator displays output signal levels. A soft-clip circuit avoids harsh clipping distortion, while a switchable overdrive circuit offers two carefully crafted distortion responses, simulating the sound of classic tube amplifiers.

Since both CV inputs are simultaneously active, they can be jointly exploited within patches featuring more complex volume control that otherwise would require using two traditional VCAs in series. As the signal path is DC-coupled, Tallin can also be used for handling the control voltages.
Read more
 2 in stock $144.99
Cat: 676518 Rel: 15 Feb 18
 
Multi-function Eurorack module - 10HP
Notes: Sewastopol is a multifunction Eurorack module designed for easy interfacing of external gear to your modular environment. It can export line and professional level audio, import audio from instruments and electroacoustic transducers, and analyse the incoming audio to generate voltages and triggers to control your modular system.

This is a second, vastly improved revision to the original 2014 Sewastopol, featuring a completely redesigned preamplifier circuit, better ergonomics and various other improvements.
Read more
 2 in stock $222.90
Cat: 633371 Rel: 14 Feb 17
 
Multi-tool synth module for audio signals & control voltages
Notes: Samara is a "Swiss Army Knife" type of module, intended to serve the most common voltage and audio signal processing purposes such as attenuation, offsetting, mixing, inverting, and even basic waveshaping. Samara features four channels, each with two inputs and an attenuator, additional switchable offset generators, four voltage level and polarity indicators, two adders with switchable scale, and a precision four-channel processor that selects minimum and maximum voltage.
Read more
 2 in stock $177.45
Cat: 655355 Rel: 29 Jun 17
 
Voltage controlled four channel stereo mixer module
Notes: The module is built around high quality VCA chips from THAT Corp, as well as low noise opamps. It offers clickless muting and equal loudness panning. The distinct feature is that voltage control is dynamically compressed should it yield clipping when pushed too hard. Also, in both modes the attenuators offer full closing of the corresponding channel, regardless of being controlled by the CV, or not. The VCAs fully open (0dB gain) at CV=8V in Env mode and CV=5V in LFO mode. All the input and output signal levels are Eurorack levels.

Multiple Praga units can be chained thanks to dedicated headers on the back. The mixed stereo sum of each unit in the chain is added to the mixing bus of all units downstream.

A dedicated Hrad expander will offer master volume control, gate inputs for channels muting/unmuting, headphone amplifier, and voltage control over aux sends.
Read more
 1 in stock $433.90
Cat: 621355 Rel: 28 Nov 16
 
Breakout expander for the Batumi quadruple LFO module
Notes: Poti is a simple but very useful breakout expander for the Batumi quadruple LFO module by Xaoc Devices. Its panel provides an immediate access to the Batumi functions originally selected by the cluster of jumpers on the back of the module: Reset/Sync mode option and selection of the assignable waveform.
Read more
 4 in stock $47.60
Notes: Odessa implements the principle of additive synthesis controlled by a set of carefully tailored marco parameters to harness thousands of sinusoidal partials that altogether form the resulting sound.

The interface is kept simple and accessible, so you can easily build rich and full, great sounding timbres of very complex spectra, that can be either harmonic or inharmonic. Even though inharmonic spectra yield non-periodic waveforms, all partials are frequency related to the common fundamental controlled by a V/oct input. The series of harmonics can be squeezed or spread apart, tilt, and pruned by a comb-like frequency response, resulting in a variety of unearthy sounds. Animating the comb response yields radical effects similar to flanging and phasing. Additional, often sought after features are implemented: through-zero linear frequency modulation, and unison detune: up to 5 copies of the sound can be spread apart for a fat and dense cluster of voices.

There are nine parameters, each controlled by a dedicated knob, so the workflow is as smooth and immediate as possible. Furthermore, every parameter has a dedicated CV input, allowing live animation for organic audio effects. Odessa sports two main outputs for banks of harmonic partials that can be further scaled in frequency, as well as an additional output that can either spit out a square wave or a single sinusoid of the fundamental frequency. Interesting spatial effects, crazy modulation feedbacks as well as synchronisation is possible that way.

The hardware is based on a powerful FPGA chip offering massive parallel computing. The synthesized signal is devoid of aliasing through the entire audio range thanks to intrinsically bandlimited algorithm. A simplified spectral analyser helps you to keep a visual track of what is actually happening to the harmonics.

For even more control over Odessa, you can use the Leibniz subsystem (or just the Lipsk) that can be connected to a header at the back of the module.
Read more
out of stock $0.00
Cat: 718920 Rel: 23 Apr 19
 
Expansion module for Zadar - 3HP
Notes: An expander for Zadar, adding one more assignable input for each Zadar channel and manual triggers.
Read more
 8 in stock $56.26
Cat: 652121 Rel: 30 May 17
 
Expander module designed to complement the Drezno Binary Conversion Komputor
Notes: Lipsk facilitates the inversion of the individual bits produced by Drezno (or any other module connected to its input header at the back), and delivers the resulting code to its output header. Bit inversion can be manually controlled by pressing any of combination of its eight illuminated buttons, or it can be automated by patching gate signals into its gate input sockets. An active (5V) gate flips the state of the respective bit. If the button is active (bit already flipped), then the gate flips the bit again yielding double inversion (no inversion). The corresponding LEDs show the combined effect of both manual and gate actions. The bit processing logic is hardware-based, so there is virtually no latency, allowing the binary signals to be manipulated at extreme rates.
Read more
out of stock $142.84
Cat: 633369 Rel: 05 Dec 16
 
Analog signal processing module with simultaneous four & six-stage outputs - Eurorack compatible
Notes: Kamieniec is an analog signal processing module directly inspired by a range of classic phaser effect units from 1970s that helped to define entire musical genres. Most of these classic devices contained a fairly small number of phase shifting stages, but made up for that lack with tons of character! However, what was initially intended for guitars is not necessarily sufficient for synthesizers. Therefore, the intention is to preserve the classic sound as it's transported it to a new tonal space while prioritizing flexible modular usability.

Just like many of the famous OTA-based phasers of the 1970s, Kamieniec sports four tuneable stages. However, there are two additional fixed stages included so as to increase the number of notches, and ultimately offer two versions of the mixed signal (that may be used as a stereo pair) at the two outputs of the unit. While the general topology is similar to a certain very classic phaser pedal, the circuitry has been redesigned with modern components and low noise op-amps to bring down the noise floor, improve the bandwidth, and offer a wider range of tuning. The feedback control can be set extremely deep, which results in a very high resonance that is capable of self-oscillation. This produces a unique sound otherwise unreachable for typical phasers, which can vary from subtle and creamy to utterly brutal and grinding. On top of that we've included switchable feedback paths, individual stage group outputs, CV inputs, built-in LFO, and daisy chaining ability to provide a comprehensive integration with a modular synthesizer system.

Expandability:
Unlike any other phaser module, multiple Kamieniec units can be chained together to achieve a more radical response with many notches. The general idea of chaining is to pass along the phase shifted signal to subsequent units before it is mixed with the original version in the last unit of the chain. This approach has a very different effect than plain cascading (connecting multiple phaser units in series), because a long chain of allpass sections yields a dense and uniform pattern of multiple notches, exactly like in a long phaser.

- Eurorack synth compatible
- 9hp, skiff friendly
- Current draw: +40mA / -40mA
- Reverse power protection
Read more
 2 in stock $217.49
Cat: 718919 Rel: 23 Apr 19
 
Expander for XAOC Devices Praga mixer
Notes: The XAOC HRAD is an expander for their Praga voltage-controlled mixing console, adding CV control for Aux levels, master level control, gate-controlled muting, and other powerful features.

- Additional set of controls for the PRAGA mixer
- Stereo sum level control
- Euro/line switchable output level
- Sum LED meters
- Stereo headphone amp
- Cue input
- Mix/solo cue auditioning
- Individual AUX inserts
- Voltage control over AUX send amount
- Two stereo controls for AUX return level
- Gate inputs for VC channel muting
- Power drawn from Praga
Read more
 3 in stock $233.72
Cat: 652119 Rel: 30 May 17
 
8-bit signal processor with AD & DA converter sections
Notes: Drezno and Lipsk (sold separately) are the first in series of modules which constitute The Leibniz Binary Subsystem, a group of 8-bit signal processing devices offering comprehensive digital signal manipulation, as well as audio signal, control voltage, trigger, and gate generation. Drezno is the input/output front-end of the system, consisting of an analog-to-digital converter (ADC) and a digital-to-analog converter (DAC), that alone can be used for manipulating analog signals and voltages based on their binary representation.
Read more
out of stock $236.98
Cat: 621359 Rel: 14 Feb 17
 
Utility synth module in Eurorack format - 6HP wide
Notes: Bytom is a simple - yet very useful - utility module that allows you to combine various trigger/gate signal sources to obtain interesting rhythmic events, useful for sequencing, modulation and patch automation purposes. It can also be used for summing control voltages of a positive polarity. The module consists of three independent sections. Each one can process up to four signals fed to its inputs. All three sections can be normalled into one 12-signal combination via the manual switches. Either the upper or lower section can be combined with the middle section to form an 8-signal combination. Summed signals of two or three sections will appear on the middle section's output socket. The individual outs on upper and lower units remain active even when combined with the middle section.
Read more
 1 in stock $71.41
Cat: 633368 Rel: 28 Nov 16
 
All-analogue voltage controlled filter module - Eurorack compatible
Notes: Belgrad is an all-analogue voltage controlled filter module which - on par with our other modules - brings something new to the table. While it can be used as a traditional VCF for "academic" subtractive synthesis, we guarantee countless hours of exciting timbral explorations thanks to its unique character, flexibility, and features. The most prominent feature is that it offers a multitude of frequency responses with two resonant peaks.

- Eurorack synth compatible
- 14HP, skiff friendly
- Current draw: +45mA / -42mA
- Reverse power protection
Read more
 2 in stock $285.66
Cat: 621354 Rel: 28 Nov 16
 
Quadruple Low Frequency Oscillator (LFO) synth module in Eurorack format - 10HP wide
Notes: Batumi is a fully voltage controlled, quadruple digital LFO module with a slew of interesting and user-customizable features. Each oscillator can be used independently or in one of 3 synchronized modes: quadrature, phase and divide. For each oscillator, there are sine, square and assignable (saw, ramp, triangle and trapezoid) waveform otputs available. Voltage control is possible for each oscillator's frequency, reset, and external sync ("tap tempo"). The total frequency range spans from 28 hours in voltage controlled divide mode, up to 500 Hz.
Read more
 More than 10 in stock $247.79
Cat: 588815 Rel: 02 Oct 15
 
Function generator and voltage controlled slew limiter synthesiser module - 8HP wide
Notes: MINI SLEW is a feature packed function generator and voltage controlled slew limiter.

Transient functions are generated using the rise, fall and shape controls.

Complex functions can be generated using the voltage controlled shape and vari-out via direct CV inputs.

MINI SLEW features a novel time compensation mode which permits the timing of the transient to remain relatively constant while the shape parameter is adjusted.

CV SUM mode permits a single CV patched into rise or fall to process both parameters or two CVs patched into rise and fall to be summed and applied to both parameters.

Additional features include VC cycle (toggle on/off), end of rise and end of fall outputs, FM input and an LED voltmeter for monitoring the amplitude of the direct positive output.

Power Draw: +70mA, -50mA. 8HP width. 25mm Depth.
Read more
out of stock $171.78
WMD/SSF Ultrafold Module (synth module)
Cat: 588817 Rel: 02 Oct 15
 
Voltage controlled wave folder synthesiser module - 6HP wide
Notes: ULTRAFOLD is a powerful voltage controlled wave folder.

The input drive and wave fold controls make up the heart of the design, providing warm saturation and additive harmonics to the input signal.

The wave shift control offsets the input signal to allow for asymmetrical folding - unveiling the subtleties in the distribution of spectral content.

The novel bipolar feedback control takes wave folding to a new level by returning the folded output to the input, thereby skewing the wave shapes for dramatic changes to the upper harmonics.

An auxiliary feedback input is provided to allow for insane folded FM sounds when another oscillator drives this input.

Power Draw: +30mA, -30mA. 6HP width. 25mm Depth.
Read more
 1 in stock $181.78
WMD/SSF Tool Box Module (synth module)
Cat: 588821 Rel: 02 Oct 15
 
Collection of six useful synthesiser utilities in one module - 6HP wide
Notes: TOOL-BOX is a collection of six useful synthesizer utilities.

This module includes a two input voltage summing section, a signal rectifier, bipolar comparator, analog OR (maximum), an inverter and a voltage controlled toggle switch.

TOOL-BOX provides the tools required for spicing up your patches as well as some of the typically overlooked utilities missing from most modular systems.

Power Draw: +20mA, -20mA. 6HP width. 25mm Depth.
Read more
out of stock $153.65
Cat: 588822 Rel: 02 Oct 15
 
Polarizing scaler and offset generator synthesiser modular - 4HP wide
Notes: S.P.O. is a polarizing scaler and offset generator.

Up to two inputs can be summed into a single scaler/offset generator.

The offset generator provides a DC voltage source for shifting signals into the positive or negative voltage region.

The scaler provides a means of attenuating and polarizing (inverting) the applied signal. S.P.O. works with audio and control voltages (CV).
Read more
 1 in stock $108.20
Cat: 588816 Rel: 02 Oct 15
 
Saw-core voltage controlled oscillator (VCO) synthesiser module - 10HP wide
Notes: SPECTRUM is a precision, saw-core VCO with eight possible waveforms (six simultaneous outputs), an eight octave switch, LFO mode and FM mode select with attenuation.

In addition to the standard waveforms; sine, pulse, triangle and saw, SPECTRUM features two selectable saw/pulse hybrid waveforms and two selectable sub-octave waveforms with variable range.

Additional features include pulse width modulation with CV and attenuation, hard sync and panel accessible 1V/OCT calibration.

Power Draw: +80mA, -55mA. 10HP width. 25mm Depth.
Read more
out of stock $253.21
Cat: 588813 Rel: 02 Oct 15
 
Passive quad attenuator synthesiser module - 4HP wide
Notes: QUAD ATTEN is a passive quad attenuator in a small 4hp profile.

Although quite basic, attenuators are extremely powerful in a modular system.

They are especially useful for adjusting the depth of control voltages going into modules that lack CV attenuators.

Power Draw: +0mA, -0mA (Passive). 6HP width. 25mm Depth.
Read more
 5 in stock $67.08
Cat: 588814 Rel: 02 Oct 15
 
4-pole (24dB/octave) low pass Voltage Controlled Filter (VCF) synthesiser module - 6HP wide
Notes: POLE-ZERO is a 4-pole (24dB/octave) low pass Voltage Controlled Filter (VCF) utilizing MOSFET transistors. MOSFETs are known for their soft, vacuum tube like distortion when overdriven.

POLE-ZERO is designed to exploit these characteristics with the addition of a MOSFET saturation control and provide a much wider palette of sounds when compared to a standard VCF.

A Voltage Controlled Amplier (VCA) is also a relatively novel addition and provides a simple way to amplitude modulate the filter without the need of an external VCA.

Power Draw: +20mA, -20mA. 6HP width. 25mm Depth.
Read more
out of stock $174.20
Cat: 753118 Rel: 02 Oct 15
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


MMF is a 2 pole Multi-Mode Filter in 4 HP. It has simultaneous LowPass, BandPass and HighPass filter outputs.

MMF will self oscillate into a nice sine wave and track 1V/octave. The Resonance is voltage controllable.

The PING input is for a gate or trigger, and generates a fast decay envelope with a nice sound, reminiscent of a vactrol filter, but without the vactrol. PING can normal to the FM jack, or go direct (switchable behind the panel).

The FM input is connected to an attenuverter pot to give you control over the signal.

Power Draw: +62mA, -24mA. 4HP Width. 25mm Depth.
Read more
 1 in stock $160.08
Cat: 588824 Rel: 02 Oct 15
 
2 pole multi-mode filter synthesiser module - 4HP wide
Notes: MMF is a 2 pole Multi-Mode Filter in 4 HP. It has simultaneous LowPass, BandPass and HighPass filter outputs.

MMF will self oscillate into a nice sine wave and track 1V/octave. The Resonance is voltage controllable.

The PING input is for a gate or trigger, and generates a fast decay envelope with a nice sound, reminiscent of a vactrol filter, but without the vactrol. PING can normal to the FM jack, or go direct (switchable behind the panel).

The FM input is connected to an attenuverter pot to give you control over the signal.

Power Draw: +62mA, -24mA. 4HP Width. 25mm Depth.
Read more
out of stock $170.96
Cat: 640973 Rel: 27 Feb 17
 
Tempo-syncable modulation source module - 6HP
Notes: The Modbox is a tempo syncable modulation source with a three-phase LFO, CV Skewable LFO, Sample and Hold, and White Noise generator.

LFO 1 is a three-phase LFO with independent outputs for each phase which are set at 0, 120, and 240 degrees. Shape can be switched between Sine, Triangle, and Saw with a push of a button.

LFO 2 is a Skewable LFO with three shapes. The LFO shape can be smoothly changed from a Ramp through Triangle to Saw wave shapes. The skew shape can be changed with the Skew knob or with CV

The Sample and Hold circuit's clock is normalled to the 2nd LFO but can be clocked externally as well. The sample and hold samples voltage from and internal white noise source. There is also an input for an external sample source. White noise has its own output as well for use with other modules and applications.

Both LFOs can be sync'd to an external clock source by holding the wave shape button for different lengths of time. As they are independent of each other, one can be sync'd while the other runs free like a gazelle on an African plain.

Tempo sync calculates the time between incoming clocks and reacts instantly to each new clock pulse. Each rate knob becomes a multiplier/divider when sync is engaged.
Read more
 1 in stock $203.43
Cat: 588826 Rel: 02 Oct 15
 
Delay synthesiser module - 4HP wide
Notes: DPLR is a delay module with two interactive delay lines, each with 750mS of delay time.

One input is split to two delays which share overall delay time (DELAY) and regeneration (REGEN). Side B has control over its delay offset (SPREAD) from side A.

Delay, Spread and Regen are all voltage controllable. Regen at max will echo indefinitely, and can create interesting noise swashes.

The pushbutton at the top taps through seven different crosstalk configurations (Regen isolated through ping-pong). Push and hold to change through four different Regen Filter settings from very bright to dark.
Read more
 2 in stock $167.71
WMD/SSF Blender Module (synth module)
Cat: 588818 Rel: 02 Oct 15
 
4 channel mixer and voltage controlled cross-fader synthesiser module - 6HP wide
Notes: BLENDER is a four channel mixer and voltage controlled cross-fader. BLENDER simplies mixing audio and control voltages (CV) by incorporating a single control to blend two signals at a time - also known as a cross-fader.

Two manual cross-faders and a single voltage controlled master cross-fader are provided.

Use BLENDER as a main mixer or as a dynamic control for creating complex control voltages and waveforms from your signal generators.

Power Draw: +20mA, -20mA. 6HP width. 25mm Depth.
Read more
 1 in stock $144.99
Cat: 588810 Rel: 02 Oct 15
 
Transistor core voltage controlled amplifier (VCA) synthesiser module - 6HP wide
Notes: AMPLITUDE is a discrete transistor core VCA with a wide range of waveform saturation and distortion capability.

This module is capable of faithfully reproducing the classic warmth and fat tones associated with vintage analog synthesizers and pushes that capability to the extreme.

A novel voltage controlled linear to exponential converter is included and can be used to shape incoming control voltages to the VCA CV input and can be patched out to external modules.

Power Draw: +20mA, -20mA. 6HP width. 25mm Depth.
Read more
out of stock $153.65
WMD/SSF ADSR VCA Module (synth module)
Cat: 588820 Rel: 02 Oct 15
 
Multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA) synthesiser module - 6HP wide
Notes: ADSRVCA is a multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA).

This envelope generator is capable of producing a classic, gate driven Attack/Decay/Sustain/Release (ADSR) envelope as well as a self sustaining, looping Attack Decay (AD) and Attack Decay Release (ADR) one shot envelopes.

The integrated VCA eliminates the need for an external VCA module and can be used independently when an external control voltage is utilized.

The envelope controls the shape of the VCA’s amplitude response by default.

Power Draw: +36mA, -16mA. 6HP width. 25mm Depth.
Read more
 1 in stock $170.96
FORTHCOMING
WMD Voltera Voltage Expander For Metron Module
Cat: 742232
 
4HP voltage expander module for the METRON trigger & gate sequencer
Notes: Voltera is a voltage expander module for the METRON trigger and gate sequencer and adds 4 bipolar voltage tracks in 4hp. Up to 16 Volteras can be added to a single METRON giving you up to 64 CV Sequencing lanes for your Eurorack modular system!

With independent voltage ranges and quantize settings per track, Voltera allows for real time control over 4 different parameters at once, allowing you to dial that track to the parameter you are sequencing.

Sequence melodies, modulate parameters, and more with ease by adding Voltera to your METRON set up.
Read more
coming soon $211.01
Cat: 708981 Rel: 16 Nov 18
 
Precise voltage source & offset generator in only 4 HP
Notes: The VOLT is a precision voltage source and offset generator for Eurorack modular synthesizers.

With its 14V range (-7V to +7V), VOLT can be used to calibrate oscillators, filter tracking, or anything that needs a 1V/Oct calibration.

VOLT has two buttons. Push the top to increase the voltage by one volt. Push the bottom button to decrease the voltage by one volt. Push both buttons at once to reset the voltage back to a known value.

VOLT has 3 voltage inputs and 3 voltage outputs. The input signal is summed with the voltage source, generating offsets of 1V or 1 octave at a time. This means it can be used as a precision octave switch for oscillators that lack the functionality. Create variation in your sequences with a quick touch of a button.

VOLT's octave buttons can also be switched via external gates, essentially making it an octave sequencer. One input causes it to go up, and the other causes it to go down. Two gates at once will reset the voltage back to your set value. Running basslines and melodies through volt to be sequenced up and down by octaves is a very effective and a fun way to work.
Read more
out of stock $165.55
Cat: 665769 Rel: 14 Nov 17
 
Filter/distortion module - 12HP
Notes: TRSHMSTR is a collaborative effort between WMD and electro-dance heavyweights MSTRKRFT. TRSHMSTR features an aggressive combination of band-pass filtering (FLTR) and distortion (DRV). The FLTR and DRV sections can be used independently or together to produce a wide variety of tone-shaping, from subtle distress to full-on acid destruction. The INs and OUTs of the FLTR and DRV sections are cross-normalled, so you can run your signal through FLTR and into DRV or vice-versa with no extra patching.

FLTR is a band-pass filter with self-oscillating resonance and three feedback flavours. It is calibrated to have a vocal range that evokes vintage wah voicings. The FLAVOUR switch controls the type and amount of FLTR's resonance clipping. In Flavour 1 (down position) provides heavily asymmetric silicon diode and LED clipping, allowing your signal to remain musical and organic sounding. FLAVOR 2 (up position) adds more resonance and grit using Zener Diode clipping, but still keeps your original signal intact. FLAVOR 3 (middle) pulls out all the stops (and clipping diodes) and overtakes the incoming signal with intense resonance and filter saturation.

The DRV circuit is based very loosely on Tube Screamer designs of old, but it has been painstakingly re-voiced to compliment a wider frequency range and higher levels of gain. The original TS input filter has been replaced with a trimode high-pass filter (HPF) that allows you to get everything from nasally grime to bass fuzz. In position 1 (down) you have the stock TS setting, with some low frequencies removed, but still a lot of chunk. Position 2 (up) lets the bass through, while position 3 (middle) cuts lows even more accentuating the zipper-like overtones of the incoming signal. In addition to the three HPF modes, the DRV section features three FLAVOUR modes. FLAVOUR 1 (down) uses symmetrical silicon diodes to a compressed and scooped tone with lots of fuzzy gain. FLAVOUR 2 (up) aligns the silicon diodes asymmetrically, creating more odd order harmonics. FLAVOUR 3 (centre) provides a less compressed and more crunchy tone using LEDs as clipping diodes.
Read more
out of stock $230.47
Cat: 742231 Rel: 21 Aug 19
 
Versatile band-pass filter - 12HP
Notes: TRSHMSTR is a collaborative effort between WMD and electro-dance heavyweights MSTRKRFT. TRSHMSTR features an aggressive combination of band-pass filtering (FLTR) and distortion (DRV). The FLTR and DRV sections can be used independently or together to produce a wide variety of tone-shaping, from subtle distress to full-on acid destruction. The INs and OUTs of the FLTR and DRV sections are cross-normalled, so you can run your signal through FLTR and into DRV or vice-versa with no extra patching.
Read more
 1 in stock $242.39
Cat: 580290 Rel: 03 Aug 15
 
Voltage Controlled Amplifier (VCA) synth module with 3 bipolar VCAs - 8HP wide
Notes: Intoducing the WMD Triple Bipolar VCA, the input side expansion for our Phase Displacement Oscillator. This module provides dedicated inverting/polarizing/bipolar amplitude modulating inputs normaled to the Phase Modulation inputs on the PDO.

A bipolar VCA is like a normal VCA when operated with positive control voltage. But when using a negative control voltage, the output will swing back through zero amplitude and the output will be inverted. This produces deeper modulation than a normal VCA.

The Triple Bipolar VCA is also designed to be used as a standalone module, it does not require the PDO to operate.
Read more
out of stock $242.38
Cat: 640976 Rel: 18 Apr 17
 
Polyphonic CV source expander for WMD Arpitecht
Notes: A companion module to the Arpitecht,Triad sends out three static voltages to be used with three oscillators in order to create chords underneath your Arpeggios. Triad connects to the back of the Arpitecht via included ribbon cable and will adhere to the scale and transpose information set by it's master.

Triad knob and CV input set different combinations so your chord can be completely unique, while still in key with your arpeggio. Inversion switch and CV input allow you to select three different chord voicings easily.

Controls:

- Triad Knob: Selects the 3-note combination sent via CV. Becomes an offset with CV.
- Inversion Switch: Selects which inversion of the chord the Triad will play. Set at 0 for use with CV as it will "take over".

Jacks:

- Note 1,2,3: CV outputs for use with 1V/Oct inputs on 3 oscillators
- New: This output sends a trigger each time a new chord is made/selected
- Inv: CV input for the inversion selection. Accepts 0V to +5V
- Thresholds for 1st and 2nd inversions are 1.25V and 2.5V respectively
- Triad: CV input for Triad selection. Accepts 0V to +5V.

Other:

- Size: 4HP
- Connector: 20 pin ribbon cable
Read more
out of stock $87.64
WMD Synchrodyne Module (synth module)
Cat: 580288 Rel: 03 Aug 15
 
Multi-part, multi-use eurorack synth module for the creation & manipulation of audio - 14HP wide
Notes: Introducing the WMD Synchrodyne, a multi part and multi use eurorack module for the creation and manipulation of audio. Containing several pieces to a traditional synthesizer voice, the Synchrodyne is a powerful addition to any subtractive oriented system. However, it is designed primarily as an experimental sound source/filter, intended to push the limits of modular synthesis...WMD style. The Synchrodyne now has an expansion.

The Synchrodyne is designed as a way to implement a switched capacitor filter (SCF) chip without the use of a microcontroller to run the clock. We developed a fast analog VCO that can drive the SCF with a broad range of frequency control. The problem with this would be that the VCO is then dedicated to only running the filter. So we designed a frequency multiplier based around a Phase Locked Loop IC (PLL) to take the VCO and multiply its frequency up so that the VCO could be used as an audio source, while still controlling the filter. The SCF has a frequency ratio of 50:1 or 100:1 clock frequency to output cutoff frequency. The PLL allows for many ratios of input to output frequencies to be selected, making the VCO a simultaneous audio and control source.

The PLL introduced its own challenges. Taming the PLL to stabilize at high multiplication ratios required us to develop a damping circuit. The Damping and Track Speed controls cause the PLL to have its own sound, sort of a slew limiter and self Frequency Modulation. We wanted the Synchrodyne to distort nicely with audio input, and also to self-oscillate. We added single stage rectifiers to the -12dB and -24dB filter outputs for a more aggressive sound. We opted to develop a VCA and wavefolder for the front end of the filter to further expand the palate of distortion and processing of the Synchrodyne. We had more features to add, but space was limited and we didn't want to make an excessively expensive module, so we added two 14pin expansion headers for future development.
Read more
out of stock $404.69
Cat: 580289 Rel: 03 Aug 15
 
Synth module for expanding functionality of the WMD Synchrodyne module - 22HP wide
Notes: This is the WMD Synchrodyne Expand, we went a little crazy with it. But we figured that if you can grasp the original, you're the type that always wants to go deeper. So lets take this plunge together as we attempt to explain what it all means.

The Synchrodyne by itself is capable of a great deal, containing several modules in one, prepatched internally to create a vibrant range of sounds. It was difficult to cut many of the control capabilities from the Synchrodyne to keep it within the scope of an analog switched-capacitor filter module. The expand lets us bring many of the little nuances of the Synchrodyne to the patchable world.

It is designed to be powerful and extremely dynamic when minimally patched, but when patch cords start flying around to be open and experimental. You may also use many of the parts of the Synchrodyne and Expand separately in various parts of your patches. The open architecture allows it to do many jobs, even small ones.
Read more
out of stock $361.41
Cat: 580285 Rel: 03 Aug 15
 
4 input / 4 output routing synth module - 16HP wide
Notes: Introducing the WMD Sequential Switch Matrix: Our take on an essential module.

Four inputs can be routed with individual buttons to four outputs. Those routing settings are stored in an array of matrices that can be sequenced or controlled with CV. Preset routing, feedback loops, chop sequences, trigger blasts (with expander), four-bit-wavetable-synthesis, and dramatic controllable mayhem are all possible.

The Sequential Switch Matrix (SSM) is a four input, four output signal routing system. The digitally controlled analog signal paths allow for a variety of routing control options. The open architecture allows for many uses beyond simple signal routing and unity mixing.

The Sequential Switch Matrix (SSM) is a four input, four output signal routing system. The digitally controlled analog signal paths allow for a variety of routing control options. The open architecture allows for many uses beyond simple signal routing and unity mixing.

The signal path uses 0.1% resistors and will pass precision pitch or other CV signals with minimal gain and offset errors.
Inputs 1 - 4: These inputs accept bipolar +-10V signals before clipping. Signal level will illuminate the adjacent LED; green for positive voltages, red for negative.

Outputs 1 - 4: These outputs (along the bottom) contain the signals from the inputs (summed together) if the routing LED is lit.

Comparator: The Compare In input voltage is compared to each output voltage. If the output is higher than the Compare In voltage, the Comp output will be high (10V gate) for that channel. The blue LED will also be illuminated.

DAC 1:2 Out: This output is generated from the status of the first two columns. It is a weighted Digital to Analog conversion. 1-1 is the most significant bit, carrying a weight of 2.5 volts. 2-1 is exactly half that weight (1.25V). 4-2 is the least significant bit (0.020V). The two columns provide an 8 bit voltage output that is always present.
Read more
out of stock $284.59
Cat: 580286 Rel: 29 Jul 15
 
Synth module unit for extended functionality of the SSM module
Notes: The SSM Expand 8 HP module provides extended functionality of the SSM.

Gate/Trig: Gate (Green LED lit) provides 10V outputs for each routing button. It mirrors the routing shown by the SSM LEDs. Trig mode (Red LED lit) will output a trigger when a step (CV, Step/Gate or Reset) is taken. Pushing a routing button will not change the output thus providing synchronized triggers.

Trigger Length: CV and knob provide adjustable trigger length.

Retrig on Step: When on, gates and triggers will retrigger quickly when a step is taken.

Invert Behavior: When on, routings that are OFF will produce ON triggers or Gates.

DAC3/4: Two 4 bit DAC outputs that output a weighted 4 bit voltage between 0 and 5 volts. From routing columns 3 and 4.

Step: Outputs a trigger for each step, reset or CV change that is made to the SSM.

Installation: Connect the 20 pin ribbon cable to the GTExp header on the SSM, and the ToSSM connector on the Expand. Red Stripe Down.

Specs: 8 HP. 25mm Depth. 10V Gate Outputs. Current consumption is +40mA, -3mA. 12 month warranty.
Read more
 1 in stock $149.32
Cat: 580284 Rel: 30 Jul 15
 
Filter synth module with Four 4-pole filters & switched capacitor design
Notes: The WMD Quad Anti Aliasing Filter (QAAF) was conceptualized as the first epansion for the Phase Displacement Oscillator. It is designed to eliminate aliasing and stair-step distortion from the Digital to Analog converters. We opted to make this a seperate module because it is useful by itself as well as coupled with the PDO.

There are four independent filters inside the QAAF. Each -24dB/octave Butterworth filter runs at exactly the same frequency. The Butterworth filter has a small amount of resonance and a great sound. Each input jack is normaled from the expansion header that connects to the PDO, but any signal can be filtered by plugging in.

The frequency control circuitry uses a vactrol to control the clocking speed of each filter, slowing down the response to transient signals. This brings life and character to the sound.

Controls and I/O:

CV Input - This input is roughly calibrated to 1v/octave. It drives a vactrol that will cause the QAAF to open quickly and close slowly.

Freq Knob - This knob controls the cutoff directly or acts as a bias/level shift control for the CV input.

CLK - This jack serves as a clock input or output, directly controlling the filter's frequencies at a ratio of 100:1. A jumper on the back (lower jumper) selects it's mode. Jump for clock output, leave open for clock input.

Inputs 1-4 - Audio Inputs, these are normaled from the expansion header going to the PDO. This normal is broken by plugging into these jacks.

Outputs 1-4 - These jacks are for each channel's outut.

Mix - This output is a sum of each channel's filtered input.

Frequency Limit Jumper - This rear jumper (upper set of pins) will limit the low frequency cutoff to about 300Hz. This will stop the QAAF from producing aliasing noise itself as it's clock frequency will be limited to 30kHz. Jump for limiting, leave open to disable.
Read more
out of stock $199.09
WMD Pro Output Module (synth module)
Cat: 580282 Rel: 30 Jul 15
 
Pro Output synth module with Low Distortion / Low Noise & High Headroom - 6HP wide
Notes: The WMD Pro Output is a simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear. It also includes a very high quality headphone driver.

Rail to rail opamps at the input stage allow for headroom above the typical eurorack levels of 20Vpp. The Pro Output can handle 23Vpp before clipping. Signals are attenuated down to the proper levels allowing for simple adjustment free connection to any type of device, professional or consumer.

The Pro Output is DC coupled through the entire signal path, including the headphone driver. This design eliminates coupling capacitors and the distortion they can cause.

Controls and I/O:

Input - The inputs are designed to accept any normal modular level. 10Vpp is the nominal operation level. The left input is normaled to the right side for mono operation. Inputs will clip at 23Vpp, giving enough headroom for any eurorack signal.

Phones/Line - The headphone driver connects to a 3.5mm stereo jack, and a 1/4" jack for whatever type of headphones you use. It can drive both simultaneously.

The headphone output level is internally limited to protect against accidental knob turns. Connect a couple of jumpers to the rear of the module to disable this limiting. This will allow the headphone amp to drive headphones extremely loudly, but still without distortion. Output quality remains the same regardless of the jumper settings.

With the limiting enabled (jumpers off), the maximum output is around -10dBV. With limiting disabled (jumpers on), the maximum output increases to pro level, about +4dBu.

Stereo - The Stereo (-10dBV) output is designed to interface directly with consumer level gear. Hook directly to sound cards, portable recorders, and speakers. It can be used as a second headphone output but will be loud.

+4dBu Bal - These two outputs (left and right) are high quality low impedance balanced line drivers. They are designed to drive long cables and to drive balanced transformer or transformerless inputs. Use these to connect directly to mixing consoles, mic preamps, or any other piece of professional outboard gear.
Read more
 1 in stock $202.34
Cat: 665767 Rel: 30 Jan 18
 
Expander module for the WMD Performance Mixer - 6HP
Notes: This module gives you mute control over each channel of the Perfomance Mixer including the master Aux Sends and even the two extra stereo channels provided by the PM Channels Expander.

Also adds voltage control over the Aux Send level for the first 4 channels on the Performance Mixer.

All action happens on release.

Combo button: Hold down and select multiple channels to mute upon release.
Read more
out of stock $90.88
Cat: 665768 Rel: 15 Feb 18
 
Expander module for the WMD Performance mixer
Notes: PM Db25 is a proprietary expand module for the WMD Performance Mixer that allows for direct access to each output, balanced, including channels expand and the main outs. Connect a Db25 snake to your choice of connector on the other end and record each individual out without destruction from the faders or mutes. Reference the stereo recording while making final edits in your DAW or tape machine.
Read more
out of stock $226.14
Cat: 665766 Rel: 30 Jan 18
 
WMD Performance Mixer expander module - 10 HP
Notes: This module adds two more stereo channels with two sets of inputs each to your WMD Performance Mixer - 8 more inputs in just 10 HP!

Can be muted with Mutes expander, and includes CV over Gain, Pan, and Aux Level.

More than 30dB of gain over each channel lets you use external sources such as consumer audio equipment, not just modular signals.
Read more
out of stock $238.05
Items 1 to 50 of 1,360 on page 1 of 28
1  2  3  ...  28  »

Filter

Saved Searches
Save current search
Release Date
Close