100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 151 to 200 of 242 on page 4 of 5
«  1  2  3  4  5  »
Cat: 648377 Rel: 29 Apr 19
 
Six-channel synthesiser module - 26HP
Notes: The Spherical Wavetable Navigator (SWN) is a six-channel synthesiser that makes it easy to create slowly morphing drones, polyphonic melodies, evolving sequences, and rich textures. The SWN features six wavetable oscillators with independent pitch, level, and waveform controls. Six LFOs (Low Frequency Oscillators) can be used as modulation sources and/or envelopes, making it easy to add dynamic motion to your patch. Each channel is a full voice and can be "played" using the top row of buttons, the internal LFOs, or note-change detection on the 1V/oct jacks. The SWN ships with 12 three-dimensional (spherical) wavetables and an easy interface which allows you to record and edit custom wavetables from live audio. Open-source software for Mac, Windows, and Linux called SphereEdit can be freely downloaded and allows you computer to create, edit, and convert .wav files into Spherical wavetables to transfer into the SWN with an audio cable.
Read more
 5 in stock $558.78
Click for better price!
quote 648377
Cat: 714707 Rel: 22 Jan 19
 
4HP Eurorack module consisting of four buffer circuits for control voltages
Notes: Module A-180-4 is a fourfold CV buffer. Buffers are required if the control voltage coming from a CV source shows a voltage drop in case of changing loads or due to other reasons a buffering is required.

For the lower three units the input is normalled to the output of the above unit. That way the module can work as 1-in-4 buffered multiple provided that no signals are applied to the inputs of the three lower units.

Typical applications:

- Buffering the outputs of voltage controlled switches (e.g. A-150-1, A-150-8, A-151, A-152). Comment: in case of bidirectional switches it's not possible to integrate the buffers into the switching module because the direction is not known (i.e. which terminal of the switch is working as input and which as output). All electronic switches suffer from a small residual restistance that may cause a small voltage drop without buffering. This may become a problem especially when VCOs are controlled by the switched voltages.
- Buffering of CV interfaces, quantizers, slew limiter, S&H/T&H, sequencer etc. when VCOs are controlled by the CV (provided that the module in question does not feature a buffered output)
- Buffered multiple (similar to A-180-3)
Read more
 1 in stock $48.12
Click for better price!
quote 714707
Cat: 718919 Rel: 23 Apr 19
 
Expander for XAOC Devices Praga mixer
Notes: The XAOC HRAD is an expander for their Praga voltage-controlled mixing console, adding CV control for Aux levels, master level control, gate-controlled muting, and other powerful features.

- Additional set of controls for the PRAGA mixer
- Stereo sum level control
- Euro/line switchable output level
- Sum LED meters
- Stereo headphone amp
- Cue input
- Mix/solo cue auditioning
- Individual AUX inserts
- Voltage control over AUX send amount
- Two stereo controls for AUX return level
- Gate inputs for VC channel muting
- Power drawn from Praga
Read more
 3 in stock $226.02
Cat: 690942 Rel: 19 Sep 18
 
Dual drive & distortion module with two independent distortion circuits 10 HP
Notes: For extreme, distorted drums Dual Drive module is a must! The module features two identical overdrive sections with adjustable Gain and Drive level, each with three flavours of overdrive.
CV control over Gain and Drive adds more expression, while built in limiter prevents output signal to run into undesired clipping.

Furthermore, the output of the first section is normaled to the input of the second, so you automatically get extreme, versatile dual overdrive circuit.
The module can be used in the stereo applications as well and it's not limited for drums only - it will turn any sound source into roaring monster.
Read more
 3 in stock $224.97
Click for better price!
quote 690942
Cat: 703010 Rel: 01 Oct 18
 
5U format digital synthesiser voice module
Notes: Manis Iteritas Magnus is a voice based on the architecture of Basimilus Iteritas, but designed to be more gritty and aggressive. It accomplishes this by producing only sawtooth waves that are manipulated, modulated, and distorted through a rethought interface. Manis is suitable for leads, bass lines, drums, darkness, detuned madness, or pure mayhem.

Size: 2 MU
Depth: 1.5 Inches
Read more
$260.56 SAVE 20%
 More than 10 in stock $208.45
Cat: 738521 Rel: 22 Jul 19
 
4HP PSU connection module
Notes: If you decide to use rack ears to mount Erica Synths 84HP enclosure in the studio rack, you may want to access the PSU connection from the front of the case, instead of the top. The 4HP PSU connection module is the solution. PSU Input module is intended to be used with external PSUs which provide an output voltage from +9V to +12V ("+" in the centre).

For two row Eurorack enclosures (2x84HP), use a small screwdriver to disconnect the existing PSU connector from the blue terminal and connect the PSU connector module as shown on the photo.

For one row Eurorack enclosures (1x84HP), you will need a soldering iron to solder wires from the PSU connector module as shown on the photo. Make sure soldered wires do not touch the aluminium enclosure!
Read more
 2 in stock $19.36
Cat: 703012 Rel: 01 Oct 18
 
Analogue-inspired parameterised digital percussion
Notes: Basimilus Iteritas Magnus is a digital drum synthesiser with its roots in the analogue world. At its heart is a six-oscillator additive synthesiser with adjustable waveform, harmonic spread, attack, decay and noise. These get fed into a built-in wave folder for extra crunch.

Size: 2 MU
Depth: 1.5 Inches
Read more
 8 in stock $287.75
Cat: 690937 Rel: 25 Oct 18
 
Synth module for creating bass drum sounds - 14HP
Notes: Bass Drum is developed in collaboration with the French company e-licktronick and it's Erica Synths' take on analogue bass drum circuits adapted for modular systems. Massive, punchy sound, Accent & CV control over key parameters of the module make it distinctively expressive in live performances.
Read more
 2 in stock $250.08
Click for better price!
quote 690937
Cat: 690941 Rel: 06 Feb 19
 
Sample-based drum module with analogue VCA & decay envelope - 10HP
Notes: Hi-Hats D is Erica Synths take on classical digital hi-hats. Instead of using an integrated circuit DAC chip Hi-Hats D are using 6-bit discrete DAC for that unmistakable crunchy sound. For amplitude shaping samples are passed trough AS3330 based VCA and are controlled with an analogue envelope generator for versatile and snappy sound. Extra feature is Open Hi-Hat looping - when it's on, a certain part of the sample is looped while the envelope decay is on, thus creating distinct, delay-like effect.

Erica Synths Drum Sequencer has connectors for internal Trigger and Accent connections to Erica synths Drum modules. The connections are made via six wire ribbon cables with 2x3 connectors (similar to Eurorack PSU connectors), and you can save some patch cables if you have a lot of Erica Synths Drum modules. Internal connections will work only with Erica Synths modules and no other manufacturer module will support this functionality. If you have Erica Synths Drum Sequencer and other Erica Synths Drum modules and want to use internal connections, select "Hi-Hats D with internal connectors" option. If you do not want to use internal connections, select cheaper "Hi-Hats D without internal connectors" option.
Read more
 1 in stock $230.20
Click for better price!
quote 690941
Cat: 739891 Rel: 30 Aug 19
 
Intuitive pitch CV sequencer in 4HP
Notes: Ultra-simple 16-step Eurorack CV sequencer with randomisation option and storage for up to 16 patterns. Straight to the point business, all in just 4HP of rack space.

Supplier notes:
Small, easy-to-program sequencers are a bit of a rarity. Vox Digitalis is our answer to this issue. With intuitive displays and simple controls, VD is perfect for all your pitch CV needs. Set your sequence length, dial in each note, randomize, save and load 16 sequences -- VD does all the stuff the big sequencers do, just in 4HP.
Read more
 1 in stock $170.56
Click for better price!
quote 739891
Cat: 732847 Rel: 22 Jul 19
 
LFO + highly stable S&H in one module
Notes: Erica Pico LFO/S&H is a full analogue modulations source - LFO and Sample and Hold - to provide some controlled randomness to your modular setup.
Read more
 4 in stock $94.17
Click for better price!
quote 732847
Cat: 743810 Rel: 08 Nov 18
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Ataraxic Iteritas is a 10HP voice based on the original Ataraxic Translatron but beefed up with loads more features and tonal controls. AI starts with one of three bit tables shaped via variable interpolation that is then scrolled through, amplitude modulated, folded, and distorted by the CV-controllable front panel controls. Subby basses, metallic drones, unrelentingly digital timbres and more are all to be had from the AI.
Read more
 1 in stock $304.43
Cat: 711982 Rel: 13 Dec 18
 
Four channel CV mixer with bipolar attenuator - 4HP
Notes: Roti Pola is a four channel attenuverting CV mixer and offset with visual feedback in a small package. With nothing patched to channel 1, a 5v offset is applied to the mix, useful for controlling other parameters or modifying CV signals.
Read more
 1 in stock $95.21
Cat: 690945 Rel: 20 Sep 18
 
Compact drum mixer with compressor - 10HP
Notes: Erica Synths Drum Mixer Lite is compact version of Drum Mixer. It features extended headroom and a dedicated drum compressor of unique design keeps each drum sound clearly distinguishable and add power to the final mix. Bonus feature - effects send output allows to apply external effects to the signals on the first three inputs. LEDs next to each input give visual feedback on the signal level.

Mixer gain -+6dB
Power consumption 59mA@+12V, 36mA@-12V
Module width 10HP
Module depth 35 mm
Read more
 1 in stock $150.67
Cat: 725425 Rel: 23 May 19
 
wavetable oscillator synth voice module
Notes: Cursus Iteritas Percido is the second module in the Percido line of powerful synth voices. Similar to its predecessor the Loquelic Iteritas Percido, CIP takes the original Cursus Iteritas and adds the same musical envelope from LIP with attenuverter-controlled routing to every knob. With the inclusion of the performance-oriented Master Blaster and CV outputs, CIP is a powerhouse of incredibly versatile synthesis.
Read more
 1 in stock $533.66
Cat: 716534 Rel: 24 Jan 19
 
10HP Eurorack module featuring 4 stereo inputs with simultaneous volume adjustment on both channels
Notes: Black Stereo Mixer is just what you need, if your setup has several nowadays gaining popularity modules with stereo inputs or outputs, like Black Hole DSP, Erica Fusion Delay, MI Clouds or some other. In order to save rack space, we designed compact mixer with lot of cool, performance oriented features.

In order to save rack space, we designed a compact mixer with a lot of cool, performance oriented features.

Check out also the Black Pre-fade Listen Expander that is a satellite module to Erica Synths Black Stereo Mixer!

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, we did not economise on the module width, we put design and usability first. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.
Read more
 1 in stock $147.53
Click for better price!
quote 716534
Cat: 712712 Rel: 10 Jan 19
 
Stereo mixer, 4 stereo in, with limiter - 10HP
Notes: Drum Stereo Mixer completes the drum mix and has configurable stereo inputs to receive signals from stereo FX modules and stereo output to interface the modular system with external devices. LEDs next to each input give visual feedback on a signal level.
Read more
 1 in stock $166.37
Click for better price!
quote 712712
Cat: 717577 Rel: 31 Jan 19
 
Stereo mixer featuring 3 mono channel strips with level potentiometers - 14HP
Notes: Erica Synths Black Output is a high-quality output mixer and a stereo panner with balanced outputs and headphone amplifier for monitoring your modular masterpieces.

All inputs are buffered, we use stereo potentiometers (similar to those used in high quality studio mixers) for panning, IN4 is a stereo input with simultaneous level adjustment for both channels, IN3 has a CV controlled auto-pan function. There is also a 6.3mm jack for the balanced outputs and headphones.
Read more
 1 in stock $250.08
Cat: 712706 Rel: 10 Jan 19
 
Drum modulator featuring two independent modulation/pitched noise sources
Notes: Erica Synths Modulator is an advanced modulation and pitched noise source with focus on rhythmic (but not limited to) compositions in mind. It features two identical syncable to the BPM LFOs/noise sources with selectable morphing waveshapes. LFO frequency can be manually adjustable, as well as they provide frequency divisions and multiplication in Sync mode. Each LFO has two outputs- main one and secondary one with adjustable phase, so you can create evolving modulations. Furthermore, LFOs can be linked to work at the same frequency and the first LFO has built in VCA to control output signal amplitude.
Read more
 2 in stock $207.18
Click for better price!
quote 712706
Cat: 712715 Rel: 10 Dec 18
 
5 x attenuator for bridging Eurorack & desktop mixers - 6HP
Notes: LINK is the module that bridges Eurorack to destop mixers - it has 5 sections that attenuate Eurorack signals to line level signals and sends them to 6.3mm jacks for quality connection to the mixer.
Read more
 2 in stock $56.50
Click for better price!
quote 712715
Cat: 718793 Rel: 06 Feb 19
 
Analogue CV & audio processor for advanced signal manipulation - 10HP
Notes: Black CV Tools is fully analogue CV and audio processor module designed for advanced manipulations with signals - mixing, scaling, offsetting, wave-shaping, etc. The module has several configurations achievable via jumpers on the back of the module.
Read more
$114.05 SAVE 20%
 1 in stock $91.24
Click for better price!
quote 718793
Cat: 731183 Rel: 30 Aug 19
 
5U version of the Noise Engineering dynamic wavetable oscillator
Notes: Cursus Iteritas Magnus is an oscillator that works from a dynamically generated wavetable. It gives the user spectral-like controls over three different modes based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. Cursus Iteritas Magnus parametrizes a wide variety of sounds, but because the sounds are all based on orthogonal functions, it has a musical tone structure and can produce an extremely wide variety of harmonic sounds

Cursus Iteritas Magnus is the 5U version of Cursus Iteritas.
Read more
 1 in stock $404.95
Click for better price!
quote 731183
Cat: 729407 Rel: 30 Apr 19
 
Two transistor sub-oscillators & lowpass filter - 10HP
Notes: Erica Synths Black Double Bass is unique module that combines two transistor suboscillators (-1 and -2 octaves) and lowpass filter. It does not make sound on its own, but it will turn any VCO or beeper into massive bass sound with CV control over octave mix and cutoff frequency. Sync input that resets suboscillators on incoming pulse, provides even more versatility in sound design. The module can be also provide aggressive distortion, when used with percussive sounds like bassdrums.
Read more
 1 in stock $131.84
Cat: 690947 Rel: 01 Nov 18
 
Two Spin FV-1 chips in one module, each filled with eight custom effect programs
Notes: To add some space to your compositions and nuances in sound design Erica Synths Dual FX module brings you two identical sections of 8 custom effects with two adjustable and CV controllable parameters.

Dual FX combines two Spin FV-1 chips in one module, each filled with eight custom effect programs with two adjustable and CV controlled parameters per effect and analogue dry/wet circuit. All parameter settings can be saved with the effect and recalled instantly during the performance. Also the output of the first FX section is normalised to the second input so creating huge layers of effects is easy.
Read more
 1 in stock $281.48
Click for better price!
quote 690947
Cat: 690939 Rel: 25 Oct 18
 
Synth module for creating punchy tom sounds - 16HP
Notes: Toms is developed in collaboration with the French company e-licktronick and it's Erica Synths' take on analogue toms circuits adapted for modular systems. Massive, punchy sound, Accent and Tone CV make it distinctively expressive in studio and live performances.
Read more
 1 in stock $287.75
Click for better price!
quote 690939
Cat: 690940 Rel: 25 Oct 18
 
Classical drum machine clap sound in Eurorack format - 10HP
Notes: Clap is developed together with French company e-licktronic and it's Erica Synths' take on analogue clap circuits adapted for modular systems. Sharp, punchy sound, Accent & CV control over Tone make it distinctively expressive in studio and live performances.
Read more
 1 in stock $126.61
Cat: 741821 Rel: 05 Aug 19
 
Compact gate sequencer with eight steps - 4HP
Notes: Bin Seq is an eight-step switchable gate sequencer. Besides individual signals, it is also possible to notate tied events. In addition to clock and reset inputs, there are manual control options for both functions. A great utility module, which can not only be used to create simple beats, but to manipulate other sequencers or trigger modulators rhythmically as well.
Read more
 1 in stock $122.42
Click for better price!
quote 741821
Cat: 747034 Rel: 18 Apr 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Performance oriented Sample Drum brings you two independent drum sounds or loops with plenty of manual and CV controlled parameters. Samples are stored on the microSD card, and OLED screen makes working with samples instant and easy.

Sample Drum allows you to slice up loops directly in your modular system and rearrange them to taste. For processing, there are tuning functions (including 1 v/octave pitch tracking) and virtual VCAs plus AD envelopes. Thanks to the module's dual-channel concept, two loops can be combined. It is also possible to load one-shot samples instead of entire rhythms, of course. A total of six CV inputs guarantees lively results.

Sample Drum is composed of two identical audio players. WAV files (including cue points) are fed to the module via a micro SD card. Loops can be cut into several sections using the Data, Start and End potentiometers. The resulting slices may be played back in any order imaginable. A tune control allows real-time pitch changes. Additionally, there is a virtual VCA plus AD envelope per slice. - But that's not all! There are three CV inputs per channel, which can be routed to any parameters. It is even possible to play sounds according to the 1 v / octave standard. Results are emitted via one output per player.
Read more
 1 in stock $298.43
Cat: 742231 Rel: 21 Aug 19
 
Versatile band-pass filter - 12HP
Notes: TRSHMSTR is a collaborative effort between WMD and electro-dance heavyweights MSTRKRFT. TRSHMSTR features an aggressive combination of band-pass filtering (FLTR) and distortion (DRV). The FLTR and DRV sections can be used independently or together to produce a wide variety of tone-shaping, from subtle distress to full-on acid destruction. The INs and OUTs of the FLTR and DRV sections are cross-normalled, so you can run your signal through FLTR and into DRV or vice-versa with no extra patching.
Read more
 1 in stock $234.40
Click for better price!
quote 742231
Cat: 745109 Rel: 06 Sep 19
 
Compact yet flexible mix module - 6HP
Notes: Even with small patches with only a few modules, you usually have to combine individual signals into a single sum: You need one mixer, maybe two, and preferably as small as possible.

With Sum 42, Vermona present a compact yet versatile Eurorack mixer. You can use it as two 4-in-1 or one 8-in-1 mixers. It can process both audio signals and control voltages.

Sum 42 is an indispensable tool with a perfect size/benefit ratio.
Read more
 1 in stock $127.65
Click for better price!
quote 745109
Cat: 708102 Rel: 18 Apr 19
 
14 band inductor based fixed filter bank - silver, 30HP
Notes: This 30HP wide module features twelve fixed frequency, inductor based bandpass filters, set at half octave interval spacing and covering from 125 Hz through to 5.8kHz. It also features low pass and high pass shelf filters, again they are fixed frequency and both are active inductor based circuits. It has a vintage pedigree that harks back to the original and highly sought after 914 Fixed Filter bank from the 1960's Moog 900 series modular synthesiser system, however we have brought this design up to date and made it compact enough to fit into skiff friendly Eurorack cases by using gyrator based active inductors, and have added some other very useful features too - the bands are split alternatively to left and right channels, each having their own individual output, and there is also an inbuilt Voltage Controlled cross-fader that allows panning between the left and right banks, with a mix of all bands available in the central position.

In addition, we have a second cross fader that can mix between the dry incoming signal, or an external signal fed into input 2, and this is cross-faded against the wet MIX Output - this allows Voltage Controlled crossfading from wet to dry signals, or between wet and external signals - and the level of each can be adjusted using the Input 1 and Input 2 level controls.

A further addition is the feedback control, this is similar in design to the resonance control on a regular VCF, but because of the multiple fixed filters topology it is rather different in operation - it would normally be added in small amounts to thicken up the sound, however we have allowed the feedback to traverse to quite extreme settings for howling feedback and even soft clipped self-oscillation, especially for the noise merchants out there...

Using L/C inductor topology bandpass circuits rather than the usual Sallen Key R/C active bandpass filters does give a slightly different sound and this is part of the magic of the original 914 filterbank, as the LC based circuit exhibits less phase shift against frequency that the more common Sallen Key R/C based bandpass filters that are used in many Modular synths.

Many people often wrongly assume that a fixed filter bank is exactly the same as a graphic equaliser - however this is certainly not the case, if all of the controls of a graphic EQ are set to centre then a flat frequency response is expected and the output will sound very similar, or identical to the input - this does not happen with a fixed filter bank, the frequency response rises and falls as it passes between each stage (but to a lesser extent than if the filters are all set to maximum output), so it acts as a soft slope comb filter, and the resulting output sounds very different from the input signal. Also, with all of the individual filters turned to zero there will be no output at all.
Read more
 1 in stock $471.92
Click for better price!
quote 708102
Cat: 708117 Rel: 22 Jan 19
 
MiniMod Glide + Noise, combining two Minimoog circuits in one module - 6HP
Notes: The original MiniMod Glide +Noise module was based exactly on the original Minimoog Model D circuitry, which was designed to be used with the built in Model D keyboard, and because of its vintage design its range was severely limited to 5 or 6 octaves, and it also responded to positive voltages only. Another limitation was that it would not return fully to zero when selecting long glide times, which restricted the range even more.

So we made the decision to re-design the MiniMod Glide + Noise using modern precision parts, and we have come up with an all new circuit which has exactly the same function, but with a hugely extended range. It has the same Glide slope characteristic (a slightly curved Linear Glide) as the Model D on which the MiniMod is based, however in response to many requests from customers we have adjusted the glide up and down speeds so that they are now very similar , which is much more useful in real world applications that the earlier MK1 version which (like the Model D) would glide up considerably faster than it would glide down.

The new Mk2 MiniMod Glide Noise module now has an impressive 14 octave range, and can respond to negative voltages down to -5V. This is a very useful feature, as our MiniMod VCO's will respond to negative control voltages and produce correspondingly low frequencies; so it is now possible to glide down quickly or slowly to crazy sub bass levels! The hold feature has been improved too, it covers the full audio range as well as DC control voltages, and works as a track and hold module with Eurorack signal levels.

A further enhancement is that the Mk2 module can now (using selectable jumpers) transmit or receive pitch CV to the Eurorack power bus; for example, the Glide CV Output can now be directed to the Bus in order to send CV's to (for example) three VCO's via the bus without the need for a passive multi and four patch cords!

The Noise section of the module is unchanged, except that we have slightly boosted the level of the Red Noise output to bring it more in line with Eurorack control voltage levels.

Lastly, it is much shallower - Mk1 Glide Noise had a depth of 54mm, and it was the only MiniMod module that was too deep to fit a skiff style case - and this prevented a full MiniMod system being installed into a shallow Eurorack case. The new MK2 version is only 28mm deep, so this allows both it and a full MiniMod system to be mounted into shallow skiff style Eurorack cases.

Dimensions: 6HP wide, 26mm Deep
Current draw: 36mA Positive, 38mA Negative
Read more
 1 in stock $166.37
Click for better price!
quote 708117
Cat: 708079 Rel: 22 Jan 19
 
12 stage multi tap stereo phaser - black, 18HP
Notes: The next generation 12 stage, analogue multi tap Phaser, which is a development of, and replacement for, our earlier MegaPhase 12 unit. It includes all the features of the MegaPhase 12 and is also built around the circuitry of the superb sounding EH Smallstone Phaser, which was used to such great effect on synthesisers and string machines by J M Jarre on his early albums. It has the same versatile Stage and Emphasis stage switching, and the same configuration of stereo outputs, where the left channel is taken from the Stage switch, and the Right output from the Emphasis Stage Switch.

New features include independent Level Controls for Input 1 and Input 2, and a Phase "Colour" Control, which can lighten or darken the phasing effect. We have also used much lower noise internal VCA's and low noise audio op-amps along with a four layer PCB design, so that the S/N ratio is improved and the noise floor is considerably reduced compared with the previous MegaPhase 12 phaser. Like its predecessor it occupies 18HP of Eurorack space.
Read more
 1 in stock $357.86
Click for better price!
quote 708079
Cat: 708095 Rel: 25 Jan 19
 
14 band inductor based fixed filter bank - black, 30HP
Notes: This 30HP wide module features twelve fixed frequency, inductor based bandpass filters, set at half octave interval spacing and covering from 125 Hz through to 5.8kHz. It also features low pass and high pass shelf filters, again they are fixed frequency and both are active inductor based circuits. It has a vintage pedigree that harks back to the original and highly sought after 914 Fixed Filter bank from the 1960's Moog 900 series modular synthesiser system, however we have brought this design up to date and made it compact enough to fit into skiff friendly Eurorack cases by using gyrator based active inductors, and have added some other very useful features too - the bands are split alternatively to left and right channels, each having their own individual output, and there is also an inbuilt Voltage Controlled cross-fader that allows panning between the left and right banks, with a mix of all bands available in the central position.

In addition, we have a second cross fader that can mix between the dry incoming signal, or an external signal fed into input 2, and this is cross-faded against the wet MIX Output - this allows Voltage Controlled crossfading from wet to dry signals, or between wet and external signals - and the level of each can be adjusted using the Input 1 and Input 2 level controls.

A further addition is the feedback control, this is similar in design to the resonance control on a regular VCF, but because of the multiple fixed filters topology it is rather different in operation - it would normally be added in small amounts to thicken up the sound, however we have allowed the feedback to traverse to quite extreme settings for howling feedback and even soft clipped self-oscillation, especially for the noise merchants out there...

Using L/C inductor topology bandpass circuits rather than the usual Sallen Key R/C active bandpass filters does give a slightly different sound and this is part of the magic of the original 914 filterbank, as the LC based circuit exhibits less phase shift against frequency that the more common Sallen Key R/C based bandpass filters that are used in many Modular synths.

Many people often wrongly assume that a fixed filter bank is exactly the same as a graphic equaliser - however this is certainly not the case, if all of the controls of a graphic EQ are set to centre then a flat frequency response is expected and the output will sound very similar, or identical to the input - this does not happen with a fixed filter bank, the frequency response rises and falls as it passes between each stage (but to a lesser extent than if the filters are all set to maximum output), so it acts as a soft slope comb filter, and the resulting output sounds very different from the input signal. Also, with all of the individual filters turned to zero there will be no output at all.
Read more
 2 in stock $471.92
Click for better price!
quote 708095
Cat: 676890 Rel: 26 Apr 19
 
Analogue synthesiser voice with expressive sound - 26HP
Notes: MANTHER GROWL is a full featured, Eurorack monophonic synth voice with an analogue signal path, and like the Manther Tabletop, it includes a coveted CEM3340 VCO IC chip. The analogue filter is based on an SSM2044 chip. Square, Saw and Triangle waveforms have their own individual level controls (manual control as well as CV jack inputs), as well as their own individual outputs. Wavefold control can be set to Tri or ALL (folds all waveforms and external input post-filter). Dial the independent LFO level controls to modulate pitch, pulsewidth and filter cutoff. Also includes manual controls over both VCA and filter ADSR and both the VCA and filter have individual gate inputs.
Read more
 2 in stock $448.91
Malekko Quad VCA Module (synth module)
Cat: 676895 Rel: 17 May 19
 
4-channel, advanced voltage controlled amplifier - 8HP
Notes: Quad VCA is a 4-channel, advanced voltage controlled amplifier with an analog signal path that can either be used stand-alone, or in tandem with the Varigate 4+ and 8+ for multiple preset recall over the power bus. Input channels 2-4 are normalled to 1 and Scan Mode allows for complex level and modulation routing. Each channel includes a mute function and all outputs are summed to a mix output. To adjust level and CV modulation per channel, use the Select Channel buttons and then adjust the Offset and Attenuverter controls. Scan Mode includes two functions. Scan: Insert 4 inputs, 1 CV and monitor Mix output for 4:1 scanning. Pan: Insert an input into Ch 1 and Ch 1 CV will route input to up to 4 different outputs. Offset and Attenuation can be adjusted to control how incoming CV is applied. The Remote switch allows you to access saved presets when paired with Varigate 8+ (100 presets) or Varigate 4+ (16 presets). In stand-alone mode, all settings are auto-saved.
Read more
 6 in stock $172.66
Cat: 677589 Rel: 15 Oct 18
 
Organic wavetable oscillator featuring scanned synthesis - 16HP
Notes: Scanned is an organic wavetable oscillator. It uses an unexplored technique known as Scanned Synthesis to animate wavetables that are created in real-time. This synthesis method was conceived by the father of computer music, Max Mathews, as the next paradigm in digital oscillators, and until now, has never been implemented on hardware.

The wavetables are dynamically generated from a set of "objects" tied together on a virtual string. These objects have physical properties including Mass, Stiffness, and Damping which affect the way that the string moves through space and time. Unlike physical modelling, however, this algorithm is a means of creating new electronic sounds, not replicating acoustic instruments.

To animate the waveform, the objects are morphed into the currently selected hammer shape and then released. This excitation of the sound generates evolving timbral landscapes that contain harmonic movement without external modulation. The hammer section also determines whether Scanned is a free-running oscillator, or a triggered sound source allowing it to function as a complete voice without additional filters or VCAs.
Read more
 1 in stock $305.54
Cat: 734840 Rel: 15 Jul 19
 
Analogue VCO focused on all aspects of modulation - 12HP
Notes: The OSC1 from Future Sound Systems presents a voltage-controlled analogue oscillator with a few features unexpected of a basic oscillator, with a particular focus on covering all bases of signal modulation. Once triangle, sinusoidal and pulse waveforms are derived from its sawtooth core, each waveform is passed through a VCA. The outputs from these VCAs are then summed at the Mix output, which can be switched between 2- and 4-quadrant-multiplication modes. These two QM modes allow for a plethora of amplitude modulation effects to be achieved. Level controls for each waveform dictate both static level, but also depth of modulation through careful design of the control summation. Each individual waveform output is taken pre-VCA for maximum patching flexibility.

Shape modulation of the triangular, sinusoidal and pulse waveforms is also available. Both the triangular and sinusoidal waveshapes can be skewed forward or backward into ramp-like shapes, whilst shaping the pulse wave gives standard pulsewidth modulation.

Frequency modulation is available in both Linear and Exponential modes. The OSC1 also tracks to 1V/Octave over four octaves in its audible (HF) range, but can also be used as a low frequency oscillator in LF mode.

A Sync input allows for the OSC1 to be reset by an external signal. A rising edge will reset the sawtooth wave to its peak, from which it descends. The Inject input, meanwhile, allows for external signals to interfere with the sawtooth core. This allows for intermodulation-type effects to be produced, and opens new realms of chaotic oscillations.
Read more
 3 in stock $249.04
Click for better price!
quote 734840
Cat: 714534 Rel: 22 Jan 19
 
Complete modular synthesiser system with protective cover & adhesive strip
Notes: The Shuttle System is a versatile modular setup, capable of generating classical as well as experimental sounds. It comes with a cover and adhesive strip for protecting the system from dust and to carry it around.

The synthesiser is composed of two Buchla style oscillators plus Waveshaper, two function generators, which can be used as envelopes, LFOs or additional VCOs, two filters respectively low pass gates with eight modes of operation and an effects processor.

Furthermore, a mono/stereo mixer with inserts and ducking compressor, utility circuits and a tune section are included. To control all those components, the instrument features an extensively equipped MIDI CV interface. Consequently, the Shuttle System is able to create an extremely wide range of high quality sounds.

The following modules are included in the Shuttle System:

Endorphin.es Cockpit:
The Cockpit is a performance mixer with 4 stereo channels, two channels of send and return to use iOS devices for signal processing (via a 4-pin TRRS cable) and also comes with an integrated compressor with sidechain input.

Endorphin.es Furthrrrr Generator:
The Furthrrrr Generator is a complex, completely analog oscillator inspired by the Buchla 259.

Endorphin.es Gateway:
Gateway is an expander for Endorhin.es Terminal which expands the envelope possibilities, with an integrated autotune-function for VCOs.

Endorphin.es Grand Terminal:
The Grand Terminal is a digital multipurpose module. Its two function generators can be used as envelopes, LFOs or VCOs. The 2 filter channels individually offer 8 modes of operation, and combined with its mixing and routing capabilities and a multi effects unit, it is not only a complete back end of a synth voice, but can also be used as a synthesiser voice, stereo filter bank or general purpose sound effects processor.

Endorphin.es Shuttle Control:
Shuttle Control is a freely configurable converter from USB-MIDI to CV/gate/clock with16 outputs. Use the USB sockets to connect a USB keyboard and the "to device" micro USB connector to hook up a tablet or PC/Mac with controller software which doesn't have to be capable of MIDI. Furthermore it can be used as power supply and distribution and internal MIDI/CV-bus for a small modular system.

Decksaver for Shuttle System:
- Closes patched
- Fits any screws
- Fits any Frap Tools 2x Plus (84 hp) cases with customs Shuttle sides (available as a kit as well)
- Secured with adhesive strip
Read more
 2 in stock $2,129.46
Cat: 714522 Rel: 22 Jan 19
 
Dual voltage controlled oscillator (VCO) synth module - 30HP
Notes: The Furthrrrr Generator has a main oscillator (carrier) with an extensive and fully voltage controllable wave multiplier and a modulation oscillator (modulator) that can cross-modulate the carrier. Each oscillator has hard and soft sync and also features an integrated tuner: if both LEDs are lit the VCO is at note A. Left LED is lit at note Ab and right LED at A#. Frequency potentiometers are ten-turn models and thus allow for easy tuning. Frequency range of the VCOs is 10Hz-10kHz (and much lower in modulator's LFO mode). Both VCOs feature 2 frequency CV inputs (1x with bipolar attenuator, 1x with 1V/octave), one FM input (jumper selectable between linear and exponential FM) as well as separate input for hard and soft sync. The voltage characteristic can be selected between 1V/octave and 1.2V/octave (Buchla norm).

The main oscillator (carrier) outputs the waveforms sine, saw, square and white noise. The two outputs marked with the magic eye are outputs of the "harmonic section" that generates very complex sounds by the wave multiplier and its parameters symmetry, order and Furthrrrr in the module's right-hand section. Symmetry lowers the level of even harmonics and amplifies the odd harmonics (this affects the pulse wave's width as well). Order adds saturation to the high order harmonics and resembles a low pass filter. Furthrrrr alters the level of harmonics set by the other parameters and produces very interesting, partly brute sounds with lots of harmonics by clipping and folding the wave. All three parameters can be voltage controlled. The carrier oscillator also has inputs for hard and soft sync, the sync-switch can synch directly to the modulator.

The modulation oscillator (modulator) has three wave forms with direct outputs: sine, saw and square. Using the internal modulation via the "mood section" the waveform is selected with a button; an additional staircase wave form is available here, but it can be overridden by inserting a signal into the external input socket. A switch activates the LFO mode.

The Mood section is responsible for the internal modulation of the carrier by the modulator. Switches determine the modulation destination(s) that can be activated simultaneously. These are the Furthrrrr parameter of the harmonic section, the amplitude and the frequency of the carrier oscillator. The "balanced" switch activates the ring modulation between both VCOs. intensity of modulation is controlled by the "mood index" potentiometer and the according CV input with bipolar attenuator.
Read more
 2 in stock $641.44
Cat: 740064 Rel: 09 Aug 19
 
Dual oscillator Eurorack module with patented wave-slicing design - 26HP
Notes: The Waverazor Dual Oscillator is a result of a special collaboration between 1010music and MOK. It is the first hardware module to bring MOK's patented wave-slicing? oscillator design to Eurorack format. Waverazor's novel approach to synthesis splices waveforms into twisted and aggressive new timbres. Featuring fresh sound generation techniques like Multi-Sync and Mutant AM, the Waverazor oscillator is perfect for biting leads, glitched-out basses, cinematic drones and everything in between.

One Waverazor Eurorack oscillator can contain up to 8 wave slices, creating a multi-segment "Frankenstein" waveform that produces extended harmonic content beyond any single wave shape. Each individual slice has independent control over wave pitch, volume, phase and DC offset, allowing a single oscillator to contain a multitude of timbral colours. Even the "Razor" itself can be adjusted, with parameters for its own slice frequency, step size multiplier and duty cycle.

The Waverazor Dual Oscillator module provides a central waveform display that allows you to visualize the output. There's an audio input for slicing up any sound you like. Four endless knobs make it possible to morph multiple parameters at once, while the touch screen enables X/Y performance controllers that allow you to manipulate the sound with the swipe of your finger. Top it all off with 20 modulation CV inputs for complete sonic insanity!

What is included:

- Waverazor Dual Oscillator Eurorack module
- MicroSD card with Waverazor firmware and patch data loaded on it
- Eurorack power cable
- Waverazor Dual Oscillator Quick Start guide
- MIDI Adapter
Read more
 2 in stock $542.04
Cat: 690924 Rel: 21 Jan 19
 
Fully analogue multipurpose movement manager - 18HP
Notes: The FALISTRI is a fully analogue multipurpose movement manager designed to generate and edit voltages to easily accomplish any patch.

The module can be divided in two big parts: in the upper two thirds of the panel take place two specular function generators, while the lower third is composed by a dual cascaded frequency divider, a linear slew limiter and a four-quadrant multiplier.
Read more
 1 in stock $359.96
Cat: 741401 Rel: 01 Aug 19
 
Analogue waveform generator & oscillator - 6HP
Notes: The Electrosmith 3340 VCO is an all analogue, voltage controlled waveform generator that uses a reissue of the legendary Curtis CEM3340 IC.

Many believe this chip to be the greatest sounding analogue oscillator of all time. Simultaneous outputs of sine, triangle, sawtooth, and square waves are available along with linear/exponential FM, hard/soft sync, and PWM capabilities. Volt per octave tracking covers a huge 10+ octaves and is extremely stable across all temperatures. Snag a piece of history with the Electrosmith 3340 VCO.
Read more
 1 in stock $150.67
Click for better price!
quote 741401
Cat: 717598 Rel: 25 Jan 19
 
8-track sequencer & interface for your Eurorack system - 26HP
Notes: Hermod brings together a powerful step sequencer, a CV looper, a real-time effect processor, LFO generators and a complete bi-directional MIDI-USB-CV input/output interface.

Record a performance at any time thanks to the CV inputs, the USB HOST, the USB DEVICE and the MIDI input. Create and edit your tracks with the STEP mode and its piano roll and automation view. Generate crazy patterns with the randomization tool.

Hermod is polymetric, it means that each track can have a different length, from 1 step to 64 steps. Moreover, you can zoom in to increase the resolution of the step sequencer (up to 512 steps).

Polymorphic tracks:

Thanks to Hermod architecture, a track can be a simple mono CV/GATE voice, but can be easily configured as a polyphonic track (up to 8 voices), a CV/GATE + velocity + aftertouch track, a modulation + clock track... in order to perfectly fit your Eurorack system!

Sequences and Projects:

The 8 tracks are grouped into one of Hermod's 8 sequences. Every sequence is totally independent and contains a new set of tracks to be played with, for a total of 64 tracks in a single project.

Dynamic effects:

All the fun in Hermod resides in its effect system, allowing you to transform input signals, whether it's MIDI or CV. You can stack on each track up to 8 real-time effects: Quantize, Swing, Arpeggiator, Ratchet, Random, Euclid, Glide, Harmonizer, Delay, Chance, Scale, LFO... Experiment with the effects position and parameters to generate eccentric melodies!

MIDI-USB-CV interface:

Full connectivity: control Hermod with plug-and-play midi USB devices, midi keyboards, computers or other Eurorack CV systems.

Hermod is also a great midi hub, allowing you to sequence midi synthesizers/drum machines and computer's virtual instruments. Of course, Hermod can be perfectly paired with Pyramid or other hardware and software sequencer, in order to benefit from its CV/GATE outputs.

The package includes:

- Hermod "Modular Brain" Black Edition
- 1GB micro SD card + SD adapter
- Power ribbon cable
- User guide (English)
Read more
 2 in stock $421.71
Click for better price!
quote 717598
Cat: 688796 Rel: 11 Feb 19
 
MIDI to CV module featuring 4 channels of CV & Gate - 7HP
Notes: 1983 is a polyphonic MIDI to CV interface with creative voice allocation and automatic tuning capabilities. There are 4 channels of CV and GATE outputs that can be used in various layouts such as hybrid splits between monophonic and polyphonic voices or velocity, CC, aftertouch, triggers, clock or reset.

Each channel is able to LISTEN to the simple waveforms of the oscillators and with a single press of the TUNE button, it adjusts the CV outputs to the same tuning (such as A = 440 Hz in equal temperament or others). It also maps the response for all 7 octaves so all the oscillators are perfectly in tune with each other (and with other instruments). PURE MAGIC!

When the UPDATE jack is used, it forces the outputs to update only when a trigger is detected.

1983 always stores the notes played in a legato sequence in a buffer and the WINDOW jack allows for selecting which of these notes appear at the outputs.

This way the MIDI keyboard can be used as an input interface for harmonies and note sets that are further creatively processed with triggers and CV in the modular environment.

The TRANSPOSE jack shifts the outputs by semitones, fifths or octaves and the PORTAMENTO jack sets the glide time by CV.
Read more
 2 in stock $290.89
Cat: 725316 Rel: 03 Apr 19
 
ARP 4023 VCF clone
Notes: Frequency Central's Whiteface is a new voltage controlled analogue filter for Eurorack based on the ARP 4023 filter, found in the "whiteface" Odyssey MK1 Synthesiser.

Besides the classic cut-off & resonance controls, it comes with two audio inputs as well as two CV inputs.

The rare parts have been engineered out (and the need for matched transistors for the CV input section) by using a Roland style circuit there instead - no change to the vibe though! The audio path remains pure ARP, with one exception. Built stock from the schematic, the resonance would clip above 3 o'clock, in a way which is neither musical or desirable. An inverting buffer has now been used, which adds a bit of gain to bring it up to modular levels. A nice side effect of the inverting buffer is that if you mix the input signal with the filter output, and find the sweet spot, you can do high-pass filtering too!
Read more
 1 in stock $146.49
Cat: 690758 Rel: 27 Feb 19
 
VCA module with dedicated controls for Volume, Drive & CV input attenuation
Notes: The DTA is a low-cost, yet high quality VCA made by Manhattan Analog. The circuit was designed as a back end for monophonic synthesiser voices. If clean sound doesn't feel right in a particular moment, you can add a decent amount of dirt using the module's drive stage.

The DTA features a signal input, followed by a VCA. The circuit's volume can be adjusted manually and via CV inputs. One of the control voltage channels comes equipped with an attenuator. Thanks to an adjustable drive stage, the sound character can be varied from clean to crisp and dirty.
Read more
 2 in stock $88.94
Click for better price!
quote 690758
Cat: 739110 Rel: 28 May 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The TRAX is a compact 6 HP Eurorack module that manages to combine the best elements of classic sequencers mixed with some amazing new features. It offers a wide range of possibilities from traditional to the more experimental algorithmic type sequencing.

With unique new features like Evolve, once you enter a pattern or two, the TRAX is able to compare the patterns and generate numerous related patterns instantly for you to access. In addition, the Remix feature will provide 256 variations of each pattern entered.

The TRAX features a Trigger Output, 2 CV Outputs, and an Analog Clock Input that doubles as an Output when reconfigured. Combine the TRAX module with the new MIDI BUS module to control TRAX with a MIDI Clock, send TRAX MIDI Input, or even send MIDI Note Output from the TRAX!

Each Trigger and CV part have their own parameters to control playback type, direction, remix, evolve, phi, randomize, copy/paste, offset, loop steps, loop bars, and a regeneration loop point for evolve and phi modes. And our unique CV Links feature allows any or all of these parameters to be used independently, or instead follow the Rhythm part's parameter values to behave more like traditional sequencers.

A host of Global features provide playback, sync, tempo control, swing, mute, fills, rec type, independent CV output quantization to 29 different scales, MIDI, MIDI to CV conversion, and screensaver.
Read more
 1 in stock $163.86
Cat: 703641 Rel: 12 Oct 18
 
3HP high fidelity multiple featuring two 1x4 buffered multiples
Notes: CLONE is a 3hp, High fidelity Multiple featuring two 1x4 buffered multiples.

Multiple B is normalized from multiple A to provide 1x8 multiple capability.

CLONE allows for signal multiplication with extremely low degradation and each section is capable of driving an equivalent load impedance of 600 Ohms without distortion and extremely low signal loss.

We use audiophile grade active components to ensure signal integrity and fidelity across the audio and low frequency spectrum, ensuring practically zero loss of your multiplied signals.

In light of modular making its way into polyphonic territory, 1:4 multiples are necessary to accommodate 4 voice polyphonic modular systems.
Read more
 2 in stock $70.11
Cat: 720430 Rel: 28 May 19
 
Trigger & CV sequencer - 6HP
Notes: The TRAX is a compact 6 HP Eurorack module that manages to combine the best elements of classic sequencers mixed with some amazing new features. It offers a wide range of possibilities from traditional to the more experimental algorithmic type sequencing.

With unique new features like Evolve, once you enter a pattern or two, the TRAX is able to compare the patterns and generate numerous related patterns instantly for you to access. In addition, the Remix feature will provide 256 variations of each pattern entered.

The TRAX features a Trigger Output, 2 CV Outputs, and an Analog Clock Input that doubles as an Output when reconfigured. Combine the TRAX module with the new MIDI BUS module to control TRAX with a MIDI Clock, send TRAX MIDI Input, or even send MIDI Note Output from the TRAX!

Each Trigger and CV part have their own parameters to control playback type, direction, remix, evolve, phi, randomize, copy/paste, offset, loop steps, loop bars, and a regeneration loop point for evolve and phi modes. And our unique CV Links feature allows any or all of these parameters to be used independently, or instead follow the Rhythm part's parameter values to behave more like traditional sequencers.

A host of Global features provide playback, sync, tempo control, swing, mute, fills, rec type, independent CV output quantization to 29 different scales, MIDI, MIDI to CV conversion, and screensaver.
Read more
 5 in stock $172.65
Items 151 to 200 of 242 on page 4 of 5
«  1  2  3  4  5  »

Filter

Saved Searches
Save current search
Release Date
Close