100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Items 1 to 50 of 108 on page 1 of 3
1  2  3  »
Cat: 719655 Rel: 03 Sep 19
High quality stereo digital FX for AE modular
Notes: Stereo effects processing for Tangible's affordable AE modular system. Offers a total of 15 digital effect programs with CV control over three parameters each. Can run in Eurorack via an optional adaptor frame.

Supplier notes:
The MULTIFX module offers 15 different stereo audio FX programs, a wide variety from common FX like reverb and delay to unique effects like Ring Crusher or Glitch delay. Also a nice shimmer effect is onboard.

Each program has 3 parameters that can be adjusted and additionally be CV-controlled.

With a switch the sample rate can be reduced to half the normal rate, resulting in doubling the effect times (with reverb, delay...) and introducing a nice portion of aliasing.

It is based on the FV-1 DSP chip that is well-known from other FX-modules in the Eurorack world; the MULTIFX module offers the 7 factory programs of the chip plus 8 new and unique ones created by Tangible Waves.
Read more
 2 in stock $110.46
Click for better price!
quote 719655
Cat: 719650 Rel: 03 Sep 19
Analogue 16-step CV sequencer
Notes: The SEQ16 is a 16-step sequencer for controlling oscillator pitch and triggering envelopes.

Compared to "classic" analogue sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ16 has 5 knobs for pre-setting different CV's (= notes); each of the 16 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.

An additional feature is "accent"; this can be set for each step by turning the knob fully clockwise. If a step is set to "accent", a separate trigger output is set and also a gate repeat for the regular gate output can be selected (from one to eight repeats).
Read more
 1 in stock $86.49
Click for better price!
quote 719650
Cat: 742228 Rel: 05 Sep 19
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 1 in stock $272.00
Click for better price!
quote 742228
Cat: 719686 Rel: 02 Sep 19
Classic wavefolder for the AE system
Notes: This module is based on a design used also by Ken Stone for his CGS system; the original circuit dates back to a publication from 1973.

Basically, the WAVEFOLDER clips and folds the incoming waveform; usually, waveforms with little overtones (like triangle or sinewaves) are used as input. In general, by the clipping and folding, the signal enriches the input signal with more overtones.
Read more
 1 in stock $33.87
Cat: 742229 Rel: 05 Sep 19
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 1 in stock $272.00
Click for better price!
quote 742229
Cat: 745109 Rel: 06 Sep 19
Compact yet flexible mix module - 6HP
Notes: Even with small patches with only a few modules, you usually have to combine individual signals into a single sum: You need one mixer, maybe two, and preferably as small as possible.

With Sum 42, Vermona present a compact yet versatile Eurorack mixer. You can use it as two 4-in-1 or one 8-in-1 mixers. It can process both audio signals and control voltages.

Sum 42 is an indispensable tool with a perfect size/benefit ratio.
Read more
 1 in stock $127.13
Click for better price!
quote 745109
Cat: 719678 Rel: 02 Sep 19
Audio mixer with 4 inputs
Notes: This module consists of an audio mixer with 4 inputs and their level knobs, plus an additional 4 separate inputs that are mixed at full level (especially for mixing CV signals), and a separate output.
Read more
 1 in stock $27.36
Cat: 719652 Rel: 02 Sep 19
4-track, 16-step trigger sequencer
Notes: TRIQ164 is a 4-track, 16-step trigger sequencer.

Four track buttons select the track to be edited; with 16 buttons each step of the track can be activated an is then displayed by an LED.

For each step in each track a "repeat" can be activated, resulting in repeated triggers within one step. The number of repeats can be selected from one to eight by the REPEAT knob. Additionally, the repeat count can be CV controlled by the REPEAT CV input.

The inputs MUTE 1/2 allow to mute the outputs 1 and 2 by an external signal (e.g. for muting a kick drum)

Each of the 16 steps has a separate trigger output for additional control for certain steps or limiting the sequence length by connecting one of the outputs to the RESET input.

Use it for any kind of rhythmical patterns, typically for triggering drum sounds or envelope generator!

No, it has no pattern load/save features; this will be part of a future, much more complex sequencer. TRIQ164 is designed as improved replacement for the STEP10.

Width: 2U
Read more
 3 in stock $52.10
Click for better price!
quote 719652
Cat: 719659 Rel: 02 Sep 19
Mono delay module
Notes: This module is a standard mono delay with the usual parameters:

- Delay time
- Feedback
- Dry/wet mix

It sounds not as clean and polished as a usual digital delay but has quite a character on its own. High feedback settings allow endless and distorting loops.

(For the techies: It is based on the well-known PT2399 chip.)
Read more
 1 in stock $38.04
Cat: 719699 Rel: 03 Sep 19
Amplifier for audio signals
Notes: 2SIGNALAMP contains two amplifier stages for audio signals; the amplification can be adjusted up to 15:1.

A clip LED indicates that the amplified level exceeds the usual range of AE modular and is short before clipping.

Main purpose of this module is to boost external audio signals for further processing within AE modular, or also the triangle output of the VCO which has by design a lower signal amplitude.
Read more
 1 in stock $28.92
Cat: 719673 Rel: 02 Sep 19
Clock divider module
Notes: The BEAT DIVIDER takes a clock signal (the BUS CLK which presents the MIDI clock from the MASTER module) and divides it to musical clock dividers, selectable from 1/2... 1/32.

Additionally, a second output provides the dotted or triplet clock of the selected divider value.
Read more
 1 in stock $27.36
Cat: 719676 Rel: 02 Sep 19
Noise generator
Notes: Analogue & Digital Noise Module.

- The A output generates analogue noise (technically, a fluctuating voltage between about 1...4V)
- The D output generates digital noise, which is a random changing 0V / 5V

The RATE knob controls the colour of the noise, which goes from almost white noise on A output and knob fully clockwise to a rather harsh and digital sound on D output and RATE counter-clockwise.
Read more
 1 in stock $26.04
Cat: 719682 Rel: 02 Sep 19
Dual NAND, AND, XOR inverter
Notes: The LOGIC module combines two inputs by different logical rules (AND, NAND, XOR). This can be used either for operations on trigger/gate signals (let gate signals pass depending on other signals, invert them depending on the other input etc), or for audio signals, where you get ringmodulator-like sounds when feeding two different oscillator frequencies.
Read more
 1 in stock $24.75
Cat: 719663 Rel: 02 Sep 19
Dual audio & CV level attenuator
Notes: 2ATT/CV contains two units of a simple level attenuator for any kind of signal. You can also switch to voltage mode and get manually controllable CV on the outputs.
Read more
 1 in stock $28.66
Cat: 719656 Rel: 03 Sep 19
State variable filter
Notes: This module is a classic state variable filter.

It offers the control knobs cut-off frequency, resonance and CV attenuator; two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter, this module has a significant self-resonance, and also a very quick response to cut-off frequency changes.

Three different outputs provide lowpass, bandpass and high-pass output.
Read more
 1 in stock $36.47
Cat: 732823 Rel: 05 Sep 19
Nutube-based distortion module - 18HP
Notes: The M T2D dual triode distortion is a Nutube-based distortion module for the Eurorack format, offering two independent channels which can be patched separately for parallel processing, stereo, or multiple sources, or used in series for more complex distortion of a single source (or simply extreme distortion settings).

Spectral tilt filters before each triode stage alternately boost or cut high and low frequencies for different harmonic emphasis. These filters also affect the feedback loops, and can interact in very interesting ways with high feedback settings. The individual tube bias controls can also have a strong influence in combination with high feedback levels, in addition to more subtle shaping of the distortion when feedback levels are low.

Independent control of input level, tube bias, feedback level, and dry/wet mix is available for each channel, with CV inputs for the bias and mix controls. The CV inputs for the mix controls also have dedicated attenuators. A global plate voltage switch offers two different character options, for either smoother distortion or more severe clipping.
Read more
 3 in stock $373.09
Click for better price!
quote 732823
Cat: 744610 Rel: 06 Sep 19
Eurorack receiver for the Wave sensor that allows Wave to connect to modular synthesisers - 4HP
Notes: The Wavefront module is the Eurorack receiver for Wave that allows Wave to connect to modular synthesizers. With Wavefront you can completely bypass the computer and bring unprecedented sound control, effect shaping and manipulation to modular setups.

Use subtle gestures to add vibrato to your favourite lead synth module, or use more visible gestures while performing.

The buttons are great for triggering sequences while the tap lets you interact with percussive modules in a completely new way. Drumming on a table has never been as fun!

To use Wavefront you need one Wave (ring) per module.
Read more
 1 in stock $191.75
Click for better price!
quote 744610
Cat: 728383 Rel: 09 May 19
New and improved version of the Qu-Bit Chord - 14HP
Notes: Polyphony is back!

Chord v2 is a plug and play solution for bringing musical polyphony to your system. It contains four oscillator voices, a multitude of waveforms, and intelligent tuning functionality. This new version features an expanded sonic palette and feature set in half the size of the original.

It features three primary modes of operation: Chord, Free Running, and Unison. These three modes allow the oscillators to be tuned as diatonic chords, run independently of each other, or be tuned to the same internal frequency for external v/oct sequencing through independent CV inputs.

The timbral possibilities of the Chord v2 bring its polyphonic tones to life. The module ships with eight banks of waveforms encompassing traditional shapes, vocal synthesis, organ emulation, and chiptune sounds. You can also load custom wavetables using the SD card slot on the front panel.

From harmonic drones to Switched On Bach, the Chord v2 is an unparalleled addition to any Eurorack modular.

Changes from v1:

- Half the size! 14HP down from 28HP
- Eight banks of waveforms
- Full polyphonic mode
- Harmonize in minor mode
- Custom wavetable compatibility
- Expanded chord types
- Improved synthesis engine
Read more
 5 in stock $264.70
Cat: 728570 Rel: 16 Jul 19
26HP Eurorack spectral re-synthesiser module
Notes: Rossum Electro-Music Software Architect Bob Bliss (who also, as it happens, fathered E-mu's famed "EOS" Emulator Operating System) has created Panharmonium, a unique music and sound design tool that analyses the spectral content of any audio signal and uses that analysis to drive a bank of from 1 to 33 oscillators. Depending on various control settings, Panharmonium can accurately reproduce the input spectrum in real time or modify it in a multitude of wildly creative ways. All with an interface whose immediacy encourages performance and interaction.

Panharmonium input can be anything from a single oscillator to an entire mix (including vocals). From dense, swirling pads and drones that evolve with the input's changing spectrum, to clock-syncable spectral arpeggiation, to as-yet unnamed harmonic effects, Panharmonium opens up an entirely new world of sonic possibilities.

Additionally, Panharmonium can take a snapshot of an instantaneous spectrum and use that as a complex harmonic oscillator, which can then be modified and modulated by all of Panharmonium's other controls.

Panharmonium accomplishes its magic though a combination of functional submodules:

Spectral Analyser:

The Spectral Analyser provides tools for defining the analysis process.

- The Slice parameter sets the rate at which the incoming audio is transformed to spectral data. It can be set by the Slice and Multiplier controls, the Tap button, or by an external clock signal. Very short slice times result in real-time spectral data, while longer times can create rhythmic spectral patterns.
- The Centre Freq and Bandwidth controls (and associated CV inputs and attenuverters) control the range of frequencies to be analysed. The Bandwidth control allows the selection of narrow to wide pass bands on the left side of the pot and narrow to wide notches on the right side of the pot. The ability to sweep the frequency and modify the bandwidth under CV control opens up a wide range of sonic effects.
- The Freeze button lets you freeze the spectral integrator, sustaining the currently analysed spectrum.

Spectral Modifiers:

These controls allow you to creatively modify the analysed spectra.

- The Voice parameter lets you select from 1 to 33 oscillators to resynthesise the spectrum.
- The Blur parameter (and associated CV input) is a spectral lag processor that controls how quickly the spectrum can change.
- The Feedback control (and associated CV input) lets you route the re-synthesised audio back into the entire processing chain for subtle or dramatic feedback effects. At its max, the output becomes self-sustaining, even if the input is removed.

Oscillator Bank:

The Oscillator Bank resynthesises the analysed spectra.

- The Waveform parameter selects the oscillators' waveform. In addition to the usual sine, triangle, sawtooth and pulse waveforms, two special crossfading sine and sawtooth waveforms are included.
- The Freq control lets you tune the oscillators over a +/-7 semitone range. The frequency is further controlled by the 1V/Oct input and the FM input and attenuverter.
- The Octave control, not surprisingly, shifts the pitch of the output by octaves.
- The Glide parameter sets the amount of polyphonic glide (i.e., each oscillator has its own glide circuit).
- The Mix control (and associated CV input) sets the balance between the original input audio and the resynthesised audio.

Optional Functions:

A number of optional functions can be selected by using the Output Mode and Tap buttons.

- Holding the Output Mode button and adjusting the Slice control enables Drums Mode, which optimizes the spectral analysis for drums and other percussive inputs.
- Holding the Output Mode button and adjusting the Centre Freq control allows you to instead set the lower frequency of the analysis range.
- Holding the Output Mode button and adjusting the Freq control enables Spectral Warping. In contrast to conventional frequency adjustment, where the harmonic relationships between the spectral elements are preserved, Spectral Warping shifts the harmonic elements individually, producing a variety of clangourous, swarming textures.
- Holding the Tap button and adjusting the Freq control quantizes the resulting frequency adjustments to semitones.

Spectra Memories and Presets:

Panharmonium provides 12 user Spectra memories and 12 user Presets (in addition to 12 each factory memories).

- The Spectra memories let you store up to 12 frozen slices. When selected, a spectrum (up to 33 oscillators wide!) replaces any live input and can have its pitch controlled by the 1V/Oct input and FM controls.
- A Preset is a snapshot of all of the module settings, along with the value of any CVs present at the moment the preset is saved.

Panharmonium is 26HP wide and 25mm deep.
Power requirements (max): 140mA +12V, 30mA -12V. Reverse polarity protected.
Read more
 2 in stock $464.81
Cat: 731192 Rel: 19 Jun 19
CV-controlled 5-channel stereo mixer - 10HP
Notes: X-PAN is a compact and powerful 5 channel Voltage Controlled Stereo Mixer with Low Noise and High Headroom allowing for creation of complex panoramic audio imagery in just 10hp.

X-PAN is highly responsive to control signals allowing for exploration of the fluctuating stereo sidebands possible with Audio Rate Crossfading and Panning. X-PAN is Direct coupled for use as a CV Processing and Routing toolbox.

X-PAN consists of two full featured Channels and one simpler Channel. The top two Channels each have voltage controlled cross-fading and panning while the third Channel is a stereo aux input with stereo VCA. All three Channels are combined together at the stereo SUM outputs.
Read more
 More than 10 in stock $207.39
Cat: 737544 Rel: 26 Jun 19
All-analogue distortion & lowpass filter - 4HP
Notes: Viol Ruina is an all-analogue distortion and lowpass filter with an internal envelope follower and self-modulating cutoff. The four-pole design is reminiscent of the classic filters we all know but with a completely new and slightly ridiculous twist. The independently addressable distortion circuit takes VR into overdriven paradise with a shocking amount of drive. Built-in envelope following makes an easy way to create dynamic patches with the flick of a switch, and feedback FM takes VR to a whole new realm of filthiness. Run a sound through VR, you'll get something cool out of it.
Read more
 3 in stock $128.18
Cat: 731938 Rel: 10 Jun 19
Noise/random generator - 4HP
Notes: Module A-118-2 is the slim version of module A-118-1 and offers essentially the same features as the A-118-1. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-118-1. The module is primarily planned for applications where only limited space is available. The functional difference between A-118-1 and A-118-2 is the additional T&H/S&H unit which is not included in the A-118-1.

The module generates the signals white noise, coloured noise, continuous random voltage and stepped random voltage (derived from the continuous random voltage by means of a S&H/T&H unit).

The noise signal is generated 100% analogue by amplification of the noise of a transistor. White and coloured noise are usually used as audio sources. The random voltages are normally used as control voltages (e.g. for filter frequency or any other voltage controlled parameter).

The A-118-2 gives you the ability to mix the relative amounts of Red (low frequency component) and Blue noise (high frequency component) in the coloured noise output.

For the continuous random voltage the rate of change (Rate) and amplitude (Level) of the random voltage can be adjusted. The continuous random voltage is derived from the coloured noise signal by low pass filtering. Consequently the settings of the controls for the coloured noise (Blue, Red) affect the behaviour of the random voltage! A dual colour LED (red = positive / yellow = negative output voltage) indicates the continuous random voltage.

The continuous random voltage is used as source for the S&H/T&H unit. The type of operation can be set to S&H (sample and hold) or T&H (track and hold). When T&H is chosen the output signal follows the input signal (= continuous random voltage) as long as the Clock input is "high". As soon as the clock signal changes to "low" the last voltage is stored. When S&H is chosen the input signal (= continuous random voltage) is sampled at the rising edge of the Clock signal.

For the Clock signal a "digital" signal (e.g. Clock, Gate, rectangle output of an LFO) is required. It does not work with slowly changing continuous CV signals. Another dual colour LED (red = positive / yellow = negative output voltage) indicates the stepped random voltage.
Read more
 2 in stock $78.15
Click for better price!
quote 731938
Cat: 731949 Rel: 10 Jun 19
Quad low frequency oscillator - 4HP
Notes: Module A-145-4 is a simple quad LFO (Low Frequency Oscillator). Not a very "exciting" module, just a bread-and-butter device and a simple demon for work. Virtually in every modular system several LFOs are required for modulation purposes. The module contains four simple LFOs with the waveforms triangle and rectangle. A dual colour LED (red = positive / yellow = negative output voltage) indicates the triangle output of each LFO. The frequency range can be chosen for each LFO individually by means of a jumper between about 50 Hz ... 0.04 Hz (about 20 seconds, jumper removed) and about 2Hz ... 0.002 (about 8 minutes, jumper installed).

The module can be treated as a slimmed version of the quad LFO A-143-3 as it has similar features available. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is less than one third of the A-143-3. The module is primarily planned for applications where only limited space is available. The functional difference compared to the A-143-3 are the missing sawtooth outputs and frequency range switches.
Read more
 5 in stock $76.07
Click for better price!
quote 731949
Cat: 727394 Rel: 23 May 19
Powerful distortion module - 4HP
Notes: Terci Ruina combines three classic distortions in 4 hp. Distortions are reinterpreted in classic NE style and routed through each other for complete sonic annihilation of any sound. Patch in and out anywhere in the signal chain to pick the best sound for your purpose (because modular). Looking for a pretty distortion? This is probably not your module. Unapologetically gross and dirty.
Read more
 1 in stock $127.13
Cat: 728569 Rel: 20 May 19
synth module with professional trigger input and audio input
Notes: Feel the sizzle as you harness the energy of liquid metal. Forge your sonic desires, and rain hot fire onto the eardrums of your listeners. Cymbals, gongs, bells, and sheet metal are the territory of Crucible.

Have you ever wanted to start with the smallest cowbell, and then CV it until it becomes a gong larger than the room you're standing in? Crucible makes this possible.

By utilizing classic digital synthesis blocks like delay and digital filters, Crucible can fully synthesize, in real time, sounds similar to thin struck pieces of metal.

We expose the engine to the user through parameters specifically chosen for their sonic resemblance to the "parameters" of a real drum kit cymbal.

Size, Pitch, Tone, and Deform give the user the tools to shape their cymbal. The Excite knob allow the user to shape their exciter, completely changing Crucible's response. Finally, select where the exciter contacts the engine by triggering the EDGE and MID inputs, or trigger both to strike the "bell."

All of this adds up to a module that is lively and energetic, completely mimicking the feeling of playing a real cymbal, while still incorporating WMD's "New Sounds, Maximum Experience" philosophy.

- Realistic sound!

- Positional trigger input. Hit the edge, middle, or bell.

- 3 Model Types: Cymbal, Cracked Cymbal, and Curved Plate

- Audio input for experimental effects.

- Separate Pitch and Size controls for maximum realism.

- Choke input for perfectly timed catches.

- Proprietary Synthesis model using digital filter and delay networks. No samples!
Read more
 5 in stock $255.32
Click for better price!
quote 728569
Cat: 690936 Rel: 18 Apr 19
Dual-channel drum sample module - 14HP
Notes: Performance oriented Sample Drum brings you two independent drum sounds or loops with plenty of manual and CV controlled parameters. Samples are stored on the microSD card, and OLED screen makes working with samples instant and easy.

Sample Drum allows you to slice up loops directly in your modular system and rearrange them to taste. For processing, there are tuning functions (including 1 v/octave pitch tracking) and virtual VCAs plus AD envelopes. Thanks to the module's dual-channel concept, two loops can be combined. It is also possible to load one-shot samples instead of entire rhythms, of course. A total of six CV inputs guarantees lively results.

Sample Drum is composed of two identical audio players. WAV files (including cue points) are fed to the module via a micro SD card. Loops can be cut into several sections using the Data, Start and End potentiometers. The resulting slices may be played back in any order imaginable. A tune control allows real-time pitch changes. Additionally, there is a virtual VCA plus AD envelope per slice. - But that's not all! There are three CV inputs per channel, which can be routed to any parameters. It is even possible to play sounds according to the 1 v / octave standard. Results are emitted via one output per player.
Read more
 8 in stock $310.56
Cat: 718648 Rel: 20 May 19
Triple oscillator module with various modulation possibilities - 30HP
Notes: The latest brainchild of synth pioneer Dave Rossum, TRIDENT is a 100% analogue, triple oscillator module that opens up a universe of dynamic timbral textures.

At its most basic level, TRIDENT is three precision audio VCOs, each sporting a unique variety of control voltage inputs.

The main or "Carrier" oscillator provides its three waveforms simultaneously. The two Modulation Oscillators each have a single output and a waveform selector. The Modulation Oscillators also have a voltage controlled Symmetry parameter which varies the duty cycle of the triangle wave output from sawtooth to triangle back to time reversed sawtooth, and also varies the sawtooth output to have an upward or downward kink in the middle, as well as controlling pulse width when the pulse waveform is selected.

And while each oscillator can be used independently if desired, it's when they're combined into a synchronous ensemble that the real sonic magic happens.

That magic is what we call "Zing" modulation. Each of the Modulation Oscillators can modulate each of the Carrier outputs in an amount controlled by the Zing parameter. Zing modulation is mathematically akin to ring modulation, but due to the synchronization of the oscillators (when an oscillator's Sync button on), the harmonic sum and difference sidetones of ring modulation transform into complex but purely harmonic overtone spectra, which vary dynamically and dramatically with the frequency and waveshape modulations of the modulation oscillators. Each change in the Modulation Oscillator parameters - Frequency, Symmetry, Waveshape, Zing, and (in the case of Modulation Oscillator 2) Phase - will have a different effect on the timbre of each of the three Carrier waveshape outputs.

When the modulation oscillators are set to track the carrier oscillator, the waveshape will remain constant as the carrier frequency changes. In this case the overtone structure is determined by the settings and CV modulations of the modulation oscillators. If instead the modulation oscillators do not track the carrier, some of the overtone structure will vary relative to the carrier frequency.

What all this means is that whether musicians take advantage of TRIDENT's unique synchronous modulation capabilities (which they, of course, should), or just treat it as three superb, wide-range analogue oscillators, TRIDENT offers a vast variety of dramatic sonic textures.
Read more
 3 in stock $509.62
Cat: 731947 Rel: 10 Jun 19
Compact 4-channel mixer - 4HP
Notes: Module A-138n is a simple four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator available. The output is twice available (two sockets, hard-wired like a multiple).

The module is the slim version of module A-138a and offers nearly the same features. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-138a. The module is primarily planned for applications where only limited space is available. The only functional difference compared to the A-138a is the missing attenuator for the (dual) output.
Read more
 3 in stock $56.97
Click for better price!
quote 731947
Cat: 731220 Rel: 15 Jul 19
Expander for the Demon Core Oscillator - 8HP
Notes: This module brings polyphonic control to the Demon Core oscillator.

The stacks can be divided between up to 16 polyphonic voices via MIDI or four 1V/oct inputs with attenuator. The oscillator can be set in continuous streaming mode or in MIDI gating mode with an ADSR envelope for each polyphonic voice.

The time sync can be also triggered via MIDI for each voice.
Read more
 1 in stock $248.03
Cat: 739050 Rel: 19 Jul 19
Three-channel active/buffered attenuverter & summing mixer
Notes: Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch.

Each input is normalled to a built-in precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch. Outputs A and B are also capable of a range of 0-10 / -10 to +10 when using the special function switches.

Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.

In addition, each channel has a "special function" switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.
Read more
 3 in stock $106.30
Cat: 734878 Rel: 09 Jul 19
Quad precision VCO - 18HP
Notes: A-111-4 contains four precision VCOs and has individual controls, inputs and outputs for each VCO available as well as a common control and output unit. After all the A-111-4 is very similar to four A-111-3 without LFO mode but built in output mixers for the three waveforms, and a master unit for all four VCOs.

Controls, inputs and outputs for each of the four VCOs:

- 1V/Octave CV input
- Octave switch (+1 / 0 / -1 octave)
- Tune control (range internally adjustable by jumpers: ~ 2 semitones / ~ 1 octave / ~ 4 octaves)
- Modulation CV input
- Modulation destination: Upper position: exponential frequency modulation (XM) / Lower position: linear frequency modulation (LM) or pulsewidth modulation of the rectangle (PM), selectable via internal jumper
- Frequency Modulation (FM) or Pulsewidth Modulation of the rectangle (PWM)
- Modulation intensity
- Triangle output
- Sawtooth output
- Rectangle output (about 50% without external PWM)
- Sync input (hard or soft sync internally selectable via jumper, CEM3340 hard sync type)
- CEM3340 based VCO (triangle core)
- Each VCO has it's own separate internal +/- power supply for each for best stability and the prevention of unwanted synchronisation of the VCOs

Controls, inputs and outputs of the master section:

- 1V/Octave CV input
- Octave switch (+1 / 0 / -1 octave)
- Tune control (range internally adjustable by jumpers: 2 semitones / 1 octave / 4 octaves)
- Frequency Modulation CV input (FM)
- FM intensity
- Triangle sum output
- Sawtooth sum output
- Rectangle sum output
- As soon as the single waveform output of a VCO is patched this waveform of the VCO in question is removed from the sum (this function can be turned off for each single output socket by means of solder bridges on the pc board, i.e. the sum contains then all signals independent of the patching of the single output)
- CV output (outputs the sum CV that is used to control all four VCOs)
- Bus CV (via jumper, optional, please remove the bus jumper if this feature is not used to avoid unwanted frequency modulation as then the unused CV line of the bus works as a kind of antenna)

Typical applications:

- Fat sounding monophonic VCO with the possibility to adjust any intervals
- Paraphonic patches in combination with the polyphonic CV interface A-190-5 (all four VCOs processed by one VCF/VCA)
- Full polyphonic patches in combination with the polyphonic CV interface A-190-5 and four complete VCF/VCA sections
- Complex VCO patches with up to four VCOs by means of the frequency modulation features (exponential an linear) and the sync functions
Read more
 2 in stock $417.16
Click for better price!
quote 734878
Cat: 718794 Rel: 18 Apr 19
Distortion module with Plasma technology - 16HP
Notes: Gamechanger Audio is a Latvian company committed to exploring the uncharted territories of music electronics and creating devices that provide real value while stretching the imagination of both musicians and engineers. In their Plasma Pedal they managed to combine Tesla coil with a lots of Rock and Roll and the result is one of the worlds heaviest sounds with plenty of unique features and the potential to become the new standard of distortion.

Similar to the Plasma Pedal, Plasma Drive gives you a new and previously unexplored method of achieving signal clipping in 16HP. Instead of using LED circuits, transistors or vacuum tubes to produce overdrive, the Plasma Drive boosts audio signal to 3000V and transforms it into a series of continuous high-voltage discharges in a xenon-filled tube. In essence - you are playing a lightning bolt of electricity, and the electrical discharges produced by your instrument are instantly converted back into an analogue audio signal, producing a quick, responsive, and extremely heavy distortion with tons of unique character!

The Eurorack module Plasma Drive brings sounds of the Plasma Pedal to the next level. As per Eurorack standards we added CV control over distortion level and dry/wet mix, as well as octave up and 1 and 2 octaves down tracking oscillators that add even more harmonics to the original signal. Tracking oscillators can be switched on/off manually or via trigger signals. The Plasma Drive module is powered via conventional Eurorack PSU ribbon cable and the power consumption is around 150mA.
Read more
 1 in stock $312.64
Cat: 736449 Rel: 15 Jul 19
Facilitates effects processing between eurorack, guitar pedals & electronic instruments
Notes: Want to connect outboard gear to your eurorack synthesizer without taking up valuable HP in your case? The INTRFX allows eurorack-level signals to be processed with pedals and/or outboard effects, and also allows line-level instruments to be processed with eurorack modules. Each of its three channels has an Interchange Switch to swap this mode, as well as an FX Blend parameter which can be controlled via CV. Because of its compact physical design, the INTRFX can be placed almost anywhere and connected to eurorack systems with 3.5mm patch cables rather than bulkier 1/4-in cables.

Feedback effects can be achieved by switching into the "wrong" mode, sending the FX return back into the FX send, while still allowing for dry signal blend and modulation. Channels can also be patched into one another and toggled between modes for experimental routing. Conveniently, each channel can operate as a reversed linear VCA for both audio and DC signals if no effects are used.

Whether you'd like to patch eurorack through some classic pedals or run a drum machine through your gnarliest modules, INTRFX makes these connections easy and flexible.
Read more
 7 in stock $207.39
Cat: 700730 Rel: 03 Jul 19
Eurorack visual generator module
Notes: STRUCTURE is a visual generator module that is based internally on an OpenGL GLSL node based platform. It uses the concept of node structures to push visuals through the system.

STRUCTURE contains a video input system that you can select between two formats, Composite video or LZX 1V RGB (with sync applied to rear of module). The Composite input does full colour decoding. Input video can be mixed through effects, with other generators, effected with audio, etc. Input video can be NTSC or PAL, 480i. STRUCTURE auto detects and converts video inputs.

STRUCTURE contains two mirrored video outputs, both composite, selectable to NTSC or PAL 480i.

Two audio rate CV inputs can be used with audio nodes to generate audio based visuals, effects moved by audio waveform, XY plotting of audio inputs, or just used at low frequency CV inputs when not using audio nodes.

Three CV rate inputs can be used to modulate a variety of controls on each node.

All CV can be set independently to 1V or 5V expected input. Each CV has a scale control and a positive offset control for fine tuning incoming CV voltages.

A joystick can be used to modulate controls in real time, or used to record motion information that is played back in a loop. In addition, the joystick has a metal hat for nice weighted movement.

STRUCTURE can also generate 3D graphics, animate properties of the 3D objects, and allow you to map and node type to the texture of the 3D objects (like video).

Three gate inputs, usable by local buttons as well.

Three macro knobs on the top right, allow for global changes to the output node which are user configurable.

STRUCTURE has a USB input, which you can attach MIDI interfaces, MIDI keyboards, controllers, etc, or even a standard PC keyboard or numeric keypad. You can assign actions or state changes to trigger from any of these input sources.

SDCARD on front and back. Backside SDCARD stores system, front side stores user presets, images, configurations, objects, custom shaders, etc.

STRUCTURE has a full colour 320×240 preview screen which also provides lots of feedback when using.
Read more
 2 in stock $864.99
Cat: 731216 Rel: 18 Jun 19
4 variable waveshape operators for linear FM synthesis - 30HP
Notes: Implementing frequency modulation synthesis completely from scratch in firmware, the Quad Operator is able to provide a modern take on frequency modulation synthesis.

- One knob per function design for true ease of use
- Any FM algorithm is possible via modulation matrix
- The Algo expander provides algorithm save/recall and crossfading capabilities
- Independent output per operator
- Virtual VCA per operator for both animating modulation and output volume control
- Includes a dedicated "AR FM" input with its own modulation sends, designed to bring an audio rate signal in from your rack for use as a modulator. Try processing a phase locked operator, and feeding it back in!
- Each operator can also be unlocked then tuned and patched independently, making the module a great general purpose oscillator bank
- Convincing digital emulation of classic analogue waveshapes - sine, triangle, square, and saw
- An LFO mode, enabled the generation of phase locked, complex modulation signals
Read more
 3 in stock $432.49
Cat: 739060 Rel: 29 Jul 19
Dedicated jack expansion module for use with the Stereo Out 1U module
Notes: 1/4" TRS jack panel in 1U for the Stereo Line Out 1U module.

If you don't own an Intellijel case with built-in compatible 1/4" jacks, then you need to purchase a Stereo Out Jacks 1U module, which connects via ribbon cable to the Stereo Line Out 1U module to provide 1/4" TRS output jacks for interfacing with other studio or stage gear.
Read more
 1 in stock $23.71
Cat: 739049 Rel: 19 Jul 19
Headphone amp capable of driving high impedance headphones via a 1/4" stereo Neutrik jack
Notes: Outs enables your modular system to output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces. Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4dBu balanced professional line-level standard or the -10 dbV unbalanced standard.

Headphone monitoring is also provided via a low noise built-in headphone amp (with its own independent level control), capable of driving a wide range of impedances - from studio grade headphones to portable style earbuds.

To use Outs, simply connect the final output of your patch to the 1/8" inputs (where the built-in activity LEDs light up to indicate the presence and intensity of the input signal). The left input is normalled to the right, so you can create a stereo signal from a mono source. Or if you have an Intellijel Mixup, you can remove a jumper from its rear panel, and connect it to the Outs module using the 3-pin link cable included with the Mixup.
Read more
 5 in stock $138.61
Cat: 725427 Rel: 03 Apr 19
Melodic percussion generator
Notes: Bell is a melodic percussion generator based on modal synthesis. By synthesizing the vibrations of complex geometric shapes, Bell provides a simple interface for creating metallic sounds that can both emulate acoustic instruments, and defy physics. Its sonic palette includes numerous physical models that span the range of vibraphone, marimba, glockenspiel and Tibetan bowls. In addition, damping allows for the articulation of all voices, and enables drastically changing the tone of your patch with a single knob turn.

It's time to ring your Bell!
Read more
 4 in stock $143.81
Click for better price!
quote 725427
Cat: 648377 Rel: 29 Apr 19
Six-channel synthesiser module - 26HP
Notes: The Spherical Wavetable Navigator (SWN) is a six-channel synthesiser that makes it easy to create slowly morphing drones, polyphonic melodies, evolving sequences, and rich textures. The SWN features six wavetable oscillators with independent pitch, level, and waveform controls. Six LFOs (Low Frequency Oscillators) can be used as modulation sources and/or envelopes, making it easy to add dynamic motion to your patch. Each channel is a full voice and can be "played" using the top row of buttons, the internal LFOs, or note-change detection on the 1V/oct jacks. The SWN ships with 12 three-dimensional (spherical) wavetables and an easy interface which allows you to record and edit custom wavetables from live audio. Open-source software for Mac, Windows, and Linux called SphereEdit can be freely downloaded and allows you computer to create, edit, and convert .wav files into Spherical wavetables to transfer into the SWN with an audio cable.
Read more
 5 in stock $556.51
Click for better price!
quote 648377
Cat: 577792 Rel: 06 Jun 19
Electronic switch with up to four steps - 4HP
Notes: Module A-151 (Quad Sequential Switch) is like an electronic four-position rotary switch.

It includes trigger and reset inputs, four in / outputs, and a common out / input. Each time a pulse is received at the trigger input socket, the common out / input is connected to the next in / output. After the fourth in / output, the next trigger makes it step back to the first again, and so on. A positive pulse at the reset input switches the out / input immediately back to the first in / output (see Fig. 1). Voltages in the range -8V...+8V at the O/I resp. I/O sockets can be processed by the module.

Four LEDs indicate the active in / output (i.e. the on that is connected to the out / input at any particular time).
Read more
 4 in stock $58.35
Click for better price!
quote 577792
Cat: 577779 Rel: 14 Jun 19
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
 2 in stock $34.65
Cat: 738616 Rel: 10 Jul 19
Stereo headphone amplifier - 6HP
Notes: The A-139-2 is a headphone amplifier module with two mono inputs and a stereo headphone output. It can be used for driving small loudspeakers, LED strips, small magnets etc.

- Two-channel headphone amplifier
- Two audio inputs with level controls
- Input 1 is normalled to Input 2
- Common loudness/master level control
- Headphone output (stereo 1/4" jack socket)
- Max. output power ~ 2 W per channel (@ 8 Ohm load)
- DC coupled inputs and outputs (i.e. also useful for other applications like small loudspeakers, lamps, LEDs, magnets, motors - provided that the power is sufficient)
Read more
 1 in stock $52.10
Click for better price!
quote 738616
Cat: 714708 Rel: 25 Mar 19
Controller module for static & dynamic control of RGB LED stripes - 4HP
Notes: Module A-197-3 is a control unit for RGB LED stripes. The LED stripe is glued e.g. to the inner edges of the cases A-100P6/P9/PMS6/PMS9/PMS12 to illuminate the modules and patching statically or dynamically. Especially during live events the dynamic illumination in sync with the sound is an eye-catcher. Each colour (red, green, blue) has available a manual control for the background brightness and a CV input with attenuator that enables the dynamic brightness controlled by other control voltages of the modular system. For example three envelopes can be used which also control the loudness or filtering of sound processing modules. But even other control applications are possible, e.g. LFO, random voltages, clock/gate/trigger signals, sequencer, Midi-to-CV.
Read more
 1 in stock $72.95
Click for better price!
quote 714708
Cat: 732851 Rel: 22 Jul 19
Compact bucket brigade delay module - 3HP
Notes: Pico BBD is surprisingly great sounding (we were surprised ourselves), full analogue 4092 stage bucket brigade delay module; the smallest BBD in Eurorack. Besides nice and clean flanger and delay effects, at full CW settings of TIME and feedback knobs it can produce extreme sonic artefacts. Tweak knobs and enjoy!
Read more
 2 in stock $131.83
Click for better price!
quote 732851
Cat: 732833 Rel: 25 Jun 19
stereo delay module
Notes: Erica Synths Black Stereo Delay is a hi-fi stereo delay with lot of unique features, based on our custom DSP engine. Developed in collaboration with Tim Pechersky aka TeemKaa of Useful Circuits. Tape, digital and ping-pong modes of delay, hold with overdub and delicate delay time and feedback control in combination with CV and trigger control over various parameters make this module not only great effects unit in your modular system, but also - an instrument on it's own.
" Stereo delay with adjustable delay time
" Tape, digital and ping-pong delay modes
" Tap and clock synchronization of delay time
" Reverse delay mode
" Hold mode (samples up to 20" of audio) with Add (overdub) feature
" Trigger control over Hold, Add and Reverse
" CV control over delay time, dry/wet mix and feedback
" Feedback path soft limiting compression
" Add to hold soft limiting compression
" Adjustable stereo delay spread
Read more
 1 in stock $311.61
Cat: 731930 Rel: 21 May 19
analogue synth module with simultaneously waveform outputs
Notes: Fusion VCO2 is a full analogue sound source with lots of distinct features.

The core of the module is highly stable AS3340-based VCO with three simultaneously available waveforms, transistor-based suboscillator and detune function - two BBD delay lines that make frequency shifter that is mixed back to the principal oscillator in order to emulate two detuned VCOs. Tube crunch - distinct tube overdrive - is added on the top of the mix. Furthermore, Audio input mixes an external audio signal with the principal oscillator which results in crazy sonic experience. Fusion VCO2 is exactly what you need, if you wish to get really low frequencies and have a sound that sets your modular system apart from mass!

" Full analogue design
" Great tracking over 8 octave range
" Detune function for thickening the sound
" -1 oct transistor based suboscillator
" Tube overdrive circuit
" External audio input
" VCO synchronization
" Simultaneous waveform outputs
Read more
 2 in stock $324.10
Click for better price!
quote 731930
Cat: 725423 Rel: 19 Mar 19
Multi-dimensional signal processor with stereo inputs & outputs
Notes: Prism is a multidimensional signal processor that creates a framework for the spectral metamorphosis of any input signal. This stereo audio buffer can be navigated through on 3 axes, each of which provides a different sonic journey through its array of time based controls.

The X and Z planes are home to a flexible delay line capable of long clocked delays, slapback echo, or comb filtered vocoder-esque timbres. On the Y axis is the decimate control. This sets the audio fidelity of the buffer by manipulating the sample rate and bit depth of the output. A state variable filter with configurable low pass, high pass, and band pass outputs can be enabled at the beginning or end of the signal chain providing yet another dimension of spectral transformation. And thanks to its digital architecture, the current buffer contents can be locked in place with the Freeze control, creating glitch and beat repeat effects which can be synced to an external clock source.

The Prism blurs the lines between DSP effect, filter, and looper and transcends into a new realm of uncharted audio processing.
Read more
 1 in stock $229.27
Cat: 739138 Rel: 16 Jul 19
Voltages expander for Permutation - silver faceplate, 6HP
Notes: Variant is an expander module based on the original Voltages expander for the Turing Machine. Variant adds two additional bipolar CV outputs (with modulation inputs) that are derived from Permutation's gate sequence.
Read more
 1 in stock $87.53
Cat: 725794 Rel: 15 Apr 19
10HP Eurorack CV modulator module
Notes: MISO is a multipurpose utility module, a laboratory for synthesizing control voltage signals and audio. MISO combines multiple CV tools into one module for making complex CV shapes at the output stage. The name comes from the four main functions available: Mix, Invert, Scale, and Offset.

MISO's 2 sections (1/2 IN and A/B IN) are identical. Each section has two inputs that can be used to Mix signals, Invert polarity/shape, Scale magnitude and Offset voltage. Each function can be used independently or simultaneously with the total shape summed to the mix output.

At the centre of the module is another processor, an accurate smooth linear voltage-controlled crossfader that mixes equally between the outputs of the top and the bottom MISO sections. Feed the MISOs with envelopes, LFOs, Sequences to create new shapes and then crossfade them manually or with CV using the centre section for even further complexity of shapes and animation of control signals. Crossfade between the waveforms of a VCO or audio samples with CV for more motion.

There are an endless number of ways to patch MISO with unexpected and inspiring results. MISO is the kind of module that gives modular synthesizers its incredible replay value, rewarding hours of creative explorations and its experimental and non-traditional mixing.

MISO offers a lot in a small comfortable module that matches Tiptop's system look with clean white faceplate styling. A red/yellow indicator light next to each section makes it easy to see signals and visualize polarity.
Read more
 3 in stock $84.54
Cat: 743521 Rel: 01 Jan 90
***B-STOCK: Box opened, product unused***
Notes: Dual VCO:
Based on the classic SYSTEM-100M modular synthesizer, the SYSTEM-500 is a fully analog recreation of one of the most revered electronic instruments of all time. Newly designed in Eurorack format, the SYSTEM-500 delivers the classic character and functionality of the original with the advantages of a modern instrument. Built in the USA and assembled in Japan, the SYSTEM-500 is made to exacting standards with top-quality components and solid controls. And it's surprisingly affordable, turning the fantasy of finally owning this legendary instrument into reality.

Classic System. New Format:
The SYSTEM-500 consists of Eurorack format modules that you can mix and match in any combination to create the ultimate Roland modular synthesizer. Each module is completely analog and has been designed for maximum compatibility with the world of contemporary synthesizer and effects modules. The SYSTEM-500 is a compact, powerful system that opens up vast possibilities for sound design and musical exploration.

512 Dual VCO:
The 512 Dual VCO (voltage controlled oscillator) is a single module consisting of two voltage controlled oscillators. Each independent VCO produces frequencies across a wide range with 1V/octave tracking and dedicated pulse, triangle, and saw wave outputs. Variable pulse width is available via panel control or CV modulation. Each oscillator's frequency can also be synchronized to the other in weak or strong modes to achieve a unique "sync" sound.
Read more
 1 in stock $311.61
Items 1 to 50 of 108 on page 1 of 3
1  2  3  »


Saved Searches
Save current search
Release Date