100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 68 on page 1 of 2
1  2  »
Cat: 732306 Rel: 09 Sep 19
 
Stereo thru-zero state-variable VCF - 16HP
Notes: The only module named after a Swedish botanist? Possibly. Relentless synth innovator Dave Rossum pushes the boundaries again with a state-variable stereo filter offering through-zero frequency modulation. Sounds complicated. Sounds good.

Supplier notes:
Following in the tradition of Evolution and Morpheus, LINNAEUS represents yet another Dave Rossum innovation in filter technology.

LINNAEUS is a stereo state-variable filter that provides the unique ability to linearly modulate its resonant frequency through zero into negative frequency, while maintaining stability. With extensive voltage control of nearly every parameter, Linnaeus lets you manipulate the filter's natural response curve in new ways, to create both subtle and dramatic timbral effects. And with a "one-knob-per-parameter" interface, LINNAEUS inspires sonic creativity that invites (and rewards) real-time interaction.

LINNAEUS's cutoff/resonant frequency is exponentially voltage controllable from sub-audio to ultrasonic frequencies, while its resonant gain (Q) is exponentially voltage controllable from 0dB to greater than 60dB.

LINNAEUS's channel output response characteristics are independently and continuously variable from Lowpass, through Bandpass, Highpass and Notch, to Low and High Shelving characteristics. Voltage control of the response characteristics are independently selectable for each of the two channels.

The linear thru-zero modulation is provided by an integrated modulation oscillator and/or an External Linear FM modulation input.

The voltage-controllable modulation oscillator can track the filter's exponential frequency or operate independently. The modulation oscillator's output waveform is continuously variable from Off through Sine, Triangle, and Sawtooth, to Square. The modulation oscillator output is summed with the external linear FM input and applied to the modulation index VCA, which controls the linear thru-zero modulation index from zero to 8X. The modulation index is, of course, also voltage controllable.
Read more
 5 in stock $392.27
Click for better price!
quote 732306
Cat: 745787 Rel: 10 Sep 19
 
Voltage-controlled clock multiplier with CV or manual control - 4HP
Notes: Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock signal is available at the socket Clock Out. According to the position of the Mode switch different clock multiplying factors are assigned to the control voltage. With 0V CV no clock output is generated. This state is indicated by "all LEDs off". With increasing CV integer factors (left position of the mode switch), power of two factors (middle position) or a mix of both (right position) are obtained. Nine LEDs are used to show the currently selected multiplying factor. In addition two LEDs are used to display the incoming and outgoing clock signal.

A manual control is used to adjust the clock multiplication factor manually without the need of an external control voltage. The voltage generated by this control ("Manual") is normalled to the CV In socket. As long as no plug is inserted into the CV In socket the clock multiplication factor is adjusted by means of the manual control knob and displayed by the LEDs. For dynamic applications (like the ratcheting function described below) the manually generated CV is overwritten by the external CV which has to be fed into the CV In socket.

The module can be used for all kind of clock multiplying applications. One important example is the generation of so-called ratcheting sequences. The band Tangerine Dream is famous for this kind of sequences. A normal sequencer generates only one gate signal per step. A ratcheting sequence may have also more than one gate pulses per step. This function can be obtained by using the A-160-5: one CV output of the sequencer is used to define the number of gate pulses per step. If the control of the step in question is fully CCW the generated CV is 0V and no gate signal is generated (mute of the step). When the control of the step in question is turned clockwise one, two or more gate pulses are generated depending upon the position of the mode switch and the voltage generated by the CV at this step.

Technical note: Due to the nature of clock multiplying it takes a few input clock pulses until the clock output is stable. One has to average a few input clock pulses to generate the multiplied clock output signal. Even when the input clock frequency changes it will take a few cycles until the output clock signal is correct as the module cannot foresee the future of the clock input signal. The generated clock output signal is derived from the last few cycles of the clock input signal. Consequently the module should be driven only by a clock signal with constant or slowly changing frequency.
Read more
 1 in stock $101.42
Click for better price!
quote 745787
Cat: 745784 Rel: 09 Sep 19
 
Analogue sequencer for CV's & trigger/gates
Notes: The Doepfer A-155 has two CV rows, each with selectable voltage range, glide and sample & hold options. Three trigger rows and a one gate row. Logic inputs for clock, reset, start and stop. It's even possible to insert external signals per step instead, overriding the CV generated by the 2nd row's potentiometer. The A-155's functions can be expanded by the A-154 Sequencer Controller, as it's an entire control unit with step number limitation, voltage controllable clock generator, variable gate length and a number of playback modes.

Features of the analogue rows (knobs):

- 8 potentiometers (knobs)
- Lower row: Scale (knob), voltage output range 0 ... ~ +6,5V
- Upper row: 1V/2V/4V (octave range switch for exact VCO control), voltage output ranges 0 ...1.0V / 0 ...2.0V / 0 ...4.0V
- Glide time (knob), same as portamento or slew limiter
- Glide Control (control input for switching glide on/off)
- S&H Control (control input for internal S&H, works like A-148)
- Pre Glide/S&H-Out (analogue output before S&H and glide unit, especially required when external audio signals are used as inputs of the lower row)
- Post Glide/S&H-Out (analogue output after S&H and glide unit)
- Lower row: external inputs for the 8 steps (switched jack sockets), control signals or audio signals may be used as inputs (allowed voltage range -5V...+12V), the knobs of the lower row are working in this case as attenuators

Features of the trigger rows (switches):

- 4 Trigger/Gate tracks with 2 rows of switches
- Toggle switches of 1-0-1 type (with middle position), which can be used to send a trigger/gate to the track above or below or to send no trigger/gate (middle position)
- 3 trigger rows (i.e. short pulse for each step set, pulse width corresponds to the pulse width of the clock/step input signal)
- 1 gate row (i.e. a high signal is applied during the length of the step set)

Control inputs and buttons:

- Step (defines the tempo of the sequence, same as clock or trigger input)
- Reset (resets all rows to step 1)
- Start (starts the sequence at the momentary position)
- Stop (stops the sequence at the momentary position)

Step and Reset are compatible to the MIDI interface A-190, i.e. in combination with the A-190 the A-155 may be synchronized via MIDI. The quantizing module A-156 can be used to quantize the infinite analogue voltages coming from A-155 into discrete semitone steps (multiples of 1/12V). Without MIDI interface e.g. a LFO rectangle output can be used to define the tempo of the sequence.

The sequencer controller A-154 adds a lot of new functions to the A-155 (e.g. voltage controlled addressing, forward/backward/pendulum/random mode, voltage control of first and last step, voltage controlled clock and gate length, step skipping, combination of several A-155 in parallel/serial mode and many more).
Read more
 1 in stock $339.48
Click for better price!
quote 745784
Cat: 745785 Rel: 10 Sep 19
 
Dual quantizer for CV's, converting a continuous positive input voltage into a stepped output voltage - 8HP
Notes: Module A-156 is a Dual Control Voltage Quantizer. A quantizer converts a continuous control voltage in the range 0...+10V into a stepped output voltage in the same voltage range (i.e. only certain voltages occur). Normally 1/12 V steps are used to obtain semitone steps. Quantizer 2 of the A-156 allows has more sophisticated quantizing modes like major scale (i.e. only voltages corresponding to the major scale), minor scale, major chord, minor chord, fundamental + fifth and addition of seventh or sixth when chords are selected. Only those voltages appear at the CV output which comply with the selection rule (e.g. minor chord with seventh). The mode setting of quantizer 2 is done with 3 switches (1-0-1 type with middle position). From the factory quantizer 1 is working in the semitone mode. But there is a jumper on the pc board that can be changed so that even quantizer 1 uses the same scale as quantizer 2.

For each quantizer the following in/outputs are available:

- Control voltage input (CV In): The input for the continuous voltage to be quantized
- Control voltage output (CV Out): The output of the quantized voltage
- Trigger input (Trig.In): If this jack is left open the quantizer is working permanently. If a rectangle voltage is applied quantisation happens only at the rising edge of the signal (e.g. from an LFO or MIDI-to-Sync interface). Thus the quantizing can be synchronized with other events
- Trigger output (Trig.Out): Whenever a quantisation happens (i.e. a new voltage is generated at the CV Out) a positive pulse occurs at this output. It may be used to trigger an envelope generator (ADSR) or for triggering other modules (sequential switch A-151, trigger divider/sequencer A-160/161, trigger delay A-162, ...). If none of these functions are used the jack is left open

On top of that the A-156 is provided with a common transpose CV input having an additive effect on both quantizers. This input is quantized in semitone steps. A typical application is the transposition of a sequence generated by the A-155 by a second control voltage (e.g. coming from the MIDI-CV interface A-190).

Typical applications:

- Quantizing the CV sequence generated by an A-155 (semitone, only major scale, only minor scale and so on)
- Quantizing the voltage coming from the Trautonium Manual / Ribbon Controller A-198, Theremin A-178 or Light-to-CV module A-179 to get accurate semitones or major/minor scale tones
- Arpeggio-like effects with LFO, random, noise, envelope generators as CV sources (for negative or symmetrical voltages an offset must be added, e.g. with the offset/attenuator module A-129-3, to obtain positive voltages for the A-156 input)
Read more
 1 in stock $111.78
Cat: 745782 Rel: 09 Sep 19
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step addressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analogue CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analogue outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be connected to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.
Read more
 1 in stock $169.74
Click for better price!
quote 745782
Cat: 745783 Rel: 09 Sep 19
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step adressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analog CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analog outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be conneted to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.

The functions of the Start/Stop/Step/Reset buttons and inputs are the same as for the "old" control unit of the A-155:

A high level at the Start input or operating the Start button starts the sequence from the momentarily addressed step. Not working in "CV controlled step address" mode.

A high level at the Stop input or operating the Stop button stops the sequence (the last active step remains addressed). Not working in "CV controlled step address" mode.
Read more
 1 in stock $158.36
Cat: 745794 Rel: 10 Sep 19
 
3-way logic module featuring two internal signal inverters - 8HP
Notes: Dual logic module with 3 inputs for each unit. The logical states of the inputs ("1" = high / "0" = low) are linked together in 3 ways: AND, OR, EXOR (exclusive OR). The three functions are available simultaneously at three outputs with LED display of the output states.

Additionally, two inverters are available to obtain the inverted functions NAND, NOR and NEXOR. The sockets of each triple unit are "normalized", i.e. the switched contact of socket 2 is connected to input 1 and the switched contact of socket 3 is connected to input 2. Provided that no plug is inserted into socket 1 resp. socket 2 the socket is connected to the input above it. This simplifies the usage of the module when only 2 signals are combined, e.g. the logic functions AND and OR have different neutral input levels ("1" is the neutral state for AND, "0" is the neutral state for OR).

In case of a fixed input level for the unused input one of the functions (AND or OR) would work no longer.

Applications: combination of digital signals of the A-100 (e.g. gates, clocks, triggers), e.g. to obtain "gated" clocks or certain rhythmic patterns.
Read more
 1 in stock $103.49
Click for better price!
quote 745794
Cat: 745792 Rel: 10 Sep 19
 
Dual trigger modifier, consisting of two trigger inverters for gate, clock or trigger signals - 4HP
Notes: Module A-165 (Dual Trigger Modifier) contains two separate trigger modifiers, to use with logical/digital levels (gate, clock, trigger). Each half of the module enables signals generated by the A-100 to communicate with other instruments (such as an external sequencer) or is simply used where you want to reverse a trigger polarity.

Whatever signal is patched into the input, inverted by the module, and fed out of the Inv. Out (inverted output) socket. At the same time, a trigger signal of roughly 50 ms is generated every time an edge of the trigger pulse is sensed (negative as well as positive). This trigger signal is available at the +/- output.

Two LEDs act as indicators showing the level of signal available at the two outputs.

When both units are daisy-chained the module can be used as level shifter for gate/trigger/clock signals (from min. +2,5V up to +12V)
Read more
 1 in stock $57.96
Click for better price!
quote 745792
Cat: 745790 Rel: 10 Sep 19
 
8HP dual trigger delay for Eurorack
Notes: Module A-162 contains two identical circuits that generate a trigger signal with adjustable delay and length from an incoming rectangle signal (e.g. gate, trigger, rectangle output of an LFO or VCO). The rising edge of the incoming signal is used to trigger the new trigger signal. This module makes it possible to delay the onset of a trigger pulse, and also change its length.

On each of the two units, two controls can alter the onset time and duration of triggers, from about 2 ms up to more than 10 seconds. A control LED shows the generated signal.
Read more
 1 in stock $62.09
Click for better price!
quote 745790
Cat: 745789 Rel: 10 Sep 19
 
Voltage-controlled clock multiplier with CV or manual control - 4HP
Notes: Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock signal is available at the socket Clock Out. According to the position of the Mode switch different clock multiplying factors are assigned to the control voltage. With 0V CV no clock output is generated. This state is indicated by "all LEDs off". With increasing CV integer factors (left position of the mode switch), power of two factors (middle position) or a mix of both (right position) are obtained. Nine LEDs are used to show the currently selected multiplying factor. In addition two LEDs are used to display the incoming and outgoing clock signal.

A manual control is used to adjust the clock multiplication factor manually without the need of an external control voltage. The voltage generated by this control ("Manual") is normalled to the CV In socket. As long as no plug is inserted into the CV In socket the clock multiplication factor is adjusted by means of the manual control knob and displayed by the LEDs. For dynamic applications (like the ratcheting function described below) the manually generated CV is overwritten by the external CV which has to be fed into the CV In socket.

The module can be used for all kind of clock multiplying applications. One important example is the generation of so-called ratcheting sequences. The band Tangerine Dream is famous for this kind of sequences. A normal sequencer generates only one gate signal per step. A ratcheting sequence may have also more than one gate pulses per step. This function can be obtained by using the A-160-5: one CV output of the sequencer is used to define the number of gate pulses per step. If the control of the step in question is fully CCW the generated CV is 0V and no gate signal is generated (mute of the step). When the control of the step in question is turned clockwise one, two or more gate pulses are generated depending upon the position of the mode switch and the voltage generated by the CV at this step.

Technical note: Due to the nature of clock multiplying it takes a few input clock pulses until the clock output is stable. One has to average a few input clock pulses to generate the multiplied clock output signal. Even when the input clock frequency changes it will take a few cycles until the output clock signal is correct as the module cannot foresee the future of the clock input signal. The generated clock output signal is derived from the last few cycles of the clock input signal. Consequently the module should be driven only by a clock signal with constant or slowly changing frequency.
Read more
 1 in stock $99.36
Click for better price!
quote 745789
Cat: 745796 Rel: 10 Sep 19
 
Pulse-width generator - 4HP
Notes: Module A-168-1 is a pulsewidth modulation generator (PWM Module). It derives a rectangle signal with adjustable pulsewidth from an external triangle, sawtooth or sine wave. The external signal can be an LFO, VCO or any other signal with falling/rising slopes (e.g. ADSR). In addition, the pulsewidth can be modulated by a CV signal (e.g. LFO or ADSR). The typical application is the generation of a rectangle signal with PWM from VCOs or LFOs which do not yet have this feature (e.g. A-110-4, A-145, A-147-2, A-143-4, A-143-9).

The module is equipped with these controls and in/output:

- Manual PW control (PW)
- PWM CV Input with attenuator (PWM)
- Signal input (In)
- Output with LED control (Out)
- Inverted Output with LED control (/Out)
- Internal trimming potentiometer for PW (is adjusted for symmetrical 50:50 rectangle when the manual PW control is at centre position)
- Internal trimming potentiometer for PWM range (is adjusted so that the manual PW control covers the full PW range 0 ... 100%)
- The trimming potentiometers are required to adjust the module for best operation for signals with different DC offsets (e.g. unipolar/bipolar signals) and different signal levels
- Normally the module is assigned to another module because the trimming potentiometer have to be readjusted when the input signal changes (unless the signals have nearly the same DC offset and level)
Read more
 1 in stock $57.96
Click for better price!
quote 745796
Cat: 745777 Rel: 10 Sep 19
 
Expansion module to the A-149-1
Notes: A-149-2 is an extension module for A-149-1. It makes available 8 digital random voltages (i.e. only low/high states like a gate signal). The outputs are controlled by the "Quantized Random Voltages" section of the assigned A-149-1 and correspond to the 8 digital outputs of the shift register that is used to generate the Quantized Random Voltages. As the alteration of the A-149-2 outputs is clock controlled by the Clk In of the "Quantized Random Voltages" section of the A-149-1 the A-149-2 can be used to create random rhythmical sequences.

The A-149-2 requires the A-149-1 and has to be mounted directly to the left or right of the A-149-1 as an internal ribbon cable connection has to be established between A-149-1 and A-149-2.
Read more
 1 in stock $53.82
Click for better price!
quote 745777
Cat: 745775 Rel: 10 Sep 19
 
Two sample & hold units in one module for generating stepped random voltages or slicing signals
Notes: Module A-148 (Dual S&H) has two identical sample & hold modules, designed to produce 'staircase' voltages. The signal present at the sample input is sampled at a rate set by the signal at the trigger input, and held at that voltage at the S&H output.

The exact shape of the staircase depends on the sort of waveform at the sample input: NOISE or RANDOM signals produce random patterns; an LFO produces rising or falling staircase patterns.

Two LEDs for each S&H indicate the voltage (positive or negative) of the sampled signal.
Read more
 1 in stock $66.24
Click for better price!
quote 745775
Cat: 745786 Rel: 09 Sep 19
 
52HP 8-channel, 16-step-button Eurorack step sequencer with breakout modules
Notes: A-157 is a trigger sequencer subsystem that generates eight trigger signals controlled by a 8x16 LED/button matrix (some customers call it "Miniature Schaltwerk" as it is based on the same matrix as the no longer available Schaltwerk).
The subsystem contains three modules:

A-157-1: 8 x 16 LED/button matrix and function addressing buttons/LEDs
A-157-2: Trigger Output module
A-157-3: Control Inputs module

The LED/button matrix module A-157-1 is the core of the subsystem. It is used to set or reset the trigger event on each of the 16 steps of each of the 8 rows. In addition the buttons and LEDs of the matrix are used for other functions too (like setting the first and last step of each row or addressing the preset memory).

The Trigger Output module A-157-2 outputs the 8 trigger signals and has an LED display for each trigger available.

The Control Inputs module A-157-3 has manual controls and trigger inputs available for the basic control functions start, stop, reset and clock. In addition four functions inputs are available which will be used in future firmware versions to assign these inputs to special functions (e.g. shifting a row left or right by means of an external gate/trigger signal or a second set of start, stop, reset and clock for individual rows).
Read more
 1 in stock $485.42
Click for better price!
quote 745786
Cat: 577765 Rel: 10 Sep 19
 
Frequency divider for clock, trigger & gate signals - 4HP
Notes: Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, e.g. an LFO, MIDI sync, or the gate from a MIDI-CV interface.

At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. The low/high levels of the output signals are 0V and about +10V.

The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.

The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length of from one to eight events.
Read more
 1 in stock $68.30
Click for better price!
quote 577765
Cat: 577759 Rel: 10 Sep 19
 
Additional 4HP module for the A-160
Notes: Module A-161 is an eight-step Clock Sequencer which is internally connected to the Clock Divider (A-160). Eight outputs are sequentially switched by the clock signals from the A-160 (see Fig. 1) and can act, for instance, as sequential rhythmic triggers for an envelope. The reset on the A-160 also works on the A-161 (instant return to Step 1). The low/high levels of the output signals are 0V and about +10V. In combination with a mixer (A-138) short analogue sequences can be generated. Our MIDI-Analog-Sequencer MAQ16/3 is suitable for MIDI-controlled analogue sequences up to 48 steps. A "real" analogue sequencer with 8 steps is the A-155.
Read more
 1 in stock $63.14
Click for better price!
quote 577759
Cat: 577757 Rel: 10 Sep 19
 
Dual quantizer for CV's, converting a continuous positive input voltage into a stepped output voltage - 8HP
Notes: Module A-156 is a Dual Control Voltage Quantizer. A quantizer converts a continuous control voltage in the range 0...+10V into a stepped output voltage in the same voltage range (i.e. only certain voltages occur). Normally 1/12 V steps are used to obtain semitone steps. Quantizer 2 of the A-156 allows has more sophisticated quantizing modes like major scale (i.e. only voltages corresponding to the major scale), minor scale, major chord, minor chord, fundamental + fifth and addition of seventh or sixth when chords are selected. Only those voltages appear at the CV output which comply with the selection rule (e.g. minor chord with seventh). The mode setting of quantizer 2 is done with 3 switches (1-0-1 type with middle position). From the factory quantizer 1 is working in the semitone mode. But there is a jumper on the pc board that can be changed so that even quantizer 1 uses the same scale as quantizer 2.

For each quantizer the following in/outputs are available:

- Control voltage input (CV In): The input for the continuous voltage to be quantized
- Control voltage output (CV Out): The output of the quantized voltage
- Trigger input (Trig.In): If this jack is left open the quantizer is working permanently. If a rectangle voltage is applied quantisation happens only at the rising edge of the signal (e.g. from an LFO or MIDI-to-Sync interface). Thus the quantizing can be synchronized with other events
- Trigger output (Trig.Out): Whenever a quantisation happens (i.e. a new voltage is generated at the CV Out) a positive pulse occurs at this output. It may be used to trigger an envelope generator (ADSR) or for triggering other modules (sequential switch A-151, trigger divider/sequencer A-160/161, trigger delay A-162, ...). If none of these functions are used the jack is left open

On top of that the A-156 is provided with a common transpose CV input having an additive effect on both quantizers. This input is quantized in semitone steps. A typical application is the transposition of a sequence generated by the A-155 by a second control voltage (e.g. coming from the MIDI-CV interface A-190).

Typical applications:

- Quantizing the CV sequence generated by an A-155 (semitone, only major scale, only minor scale and so on)
- Quantizing the voltage coming from the Trautonium Manual / Ribbon Controller A-198, Theremin A-178 or Light-to-CV module A-179 to get accurate semitones or major/minor scale tones
- Arpeggio-like effects with LFO, random, noise, envelope generators as CV sources (for negative or symmetrical voltages an offset must be added, e.g. with the offset/attenuator module A-129-3, to obtain positive voltages for the A-156 input)
Read more
 1 in stock $120.05
Click for better price!
quote 577757
Cat: 732849 Rel: 10 Sep 19
 
Compact & flexible looping AD/ASR envelope generator - 3HP
Notes: Erica Pico VC EG is versatile looping AD/ASR envelope generator with voltage control over attack and decay times. It has automatic Trigger/Gate detection, as well as "drone mode" - at full CW setting of the Decay knob, the envelope is full open. In the LOOP mode you can retrigger envelopes for even more interesting modulations.
Read more
 4 in stock $98.33
Click for better price!
quote 732849
Cat: 732855 Rel: 10 Sep 19
 
Expanded version of the popular Yocto (808) cowbell
Notes: Latvian modular specialists Erica take on the 808 cowbell. Based on the classic sound, reinvented for Eurorack with tune and decay controls plus tuning CV and accent inputs.

Supplier notes:
Erica Synths Cowbell module is an extended, modular version of Yocto (808) cowbell. For more sonic versatility we have added Tune and Decay controls, as well as Tune CV with an attenuator for nice vibratos. The module is developed in collaboration with a French company e-licktronic.
Read more
 4 in stock $111.78
Click for better price!
quote 732855
Cat: 742136 Rel: 10 Sep 19
 
Buffered precision multiple - 4HP
Notes: Erica Synths Black Multi is highly accurate active buffered 2x1to3 or 1to6 multiple that will work for signal splitting in any circuit, including driving several VCOs in tune from one CV source. "Octave" or +/- 1V offset switches on both channels allow to add or subtract one volt form each channel thus transposing VCOs one octave up or down. Hidden feature - custom offset - allows to set user defined offset on the first channel.
Read more
 3 in stock $85.89
Click for better price!
quote 742136
Polyend Preset Module (synth module)
Cat: 732317 Rel: 11 Sep 19
 
Macro controller & sequencer - 22HP
Notes: The 22 HP interface is simple, clean and streamlined. At first glance, Polyend Preset module might look like simple a digital preset manager for Eurorack systems, but it's much more than this. Its vast implications make it a very smart companion for your modular system. But let's start from the basics. With the use of 9 LED coloured clickable encoders, Preset allows you to store up to 9 different CV output values in 32 banks of 32 presets. Yep, 1024 in total!

It's capable:

Program the notes sequences using one of the 32 build-in musical scales. Record the automation using the encoders or external source.

Four modes, totally different possibilities:

Depending on what you want to achieve, there are four modes you can choose from: First, Next, Channel and Note.

Both First and Next modes are perfect for building your unique polyphonic synthesizer.

The Channel mode lets you choose which MIDI Channel is responsible for which voice. This mode is what the majority of users utilise to connect DAWs or external sequencers.

The Note mode translates data received from MIDI Notes C through G and directs them into the corresponding voices (no matter the octave). This scenario works excellent for triggering drums from drum pads or drum triggers.
Read more
 More than 10 in stock $429.51
Click for better price!
quote 732317
Cat: 732315 Rel: 11 Sep 19
 
MIDI-CV converter module for Eurorack - 14HP
Notes: Eight-voice modular synthesis? Yes please. Updated version of the Poly splits your MIDI signal to CV and gate for fully polyphonic action. Chain multiple units for even more multi-voice madness.

Supplier notes:
The Polyend Poly 2 module is a polyphonic MIDI to CV converter Eurorack module, and it will change how you interact with your sequencers, controllers, DAW, and more. This powerful module features MIDI I/O plus USB A and USB B inputs, with a total of four Gate outputs, four Pitch outputs, and 12 outs for CV (CC 0-127) signals. And using the Smart Thru connection, you can daisy-chain multiple Poly 2 modules together for even more voices. And Sweetwater was excited to report that Poly 2 is even compatible with the MPE (Multidimensional Polyphonic Expression) standard used in innovative controllers such as the Roger Linn Design LinnStrument and the ROLI Seaboard series. Once you've explored the polyphonic expression the Polyend Poly 2 module is capable of, you'll never want to be without it.

No matter what kind of MIDI controller you use - keyboard, ribbon controller, pressure pad, or whatever - the Poly 2 module offers built-in scale filtering rewards you with highly musical output. Select a scale, and only the notes within that scale will be passed along to your patch destinations. This is different from scale quantization, which forces ANY input to trigger the note its closest to in the scale, and can make it much more enjoyable to use alternative MIDI controllers with the Poly 2 module.
Read more
 More than 10 in stock $395.36
Click for better price!
quote 732315
Polyend Anywhere Powerbank Module (power supply module)
Cat: 732313 Rel: 11 Sep 19
 
Portable power source interface for Eurorack
Notes: Release your mind and release your modular system, with the Polyend Anywhere power compatibility Eurorack module. The Polyend Anywhere hooks up to any Power Bank battery to allow the user the liberty of portability with their modular system. Take your system for a walk! Smell the flowers, and use the inspiration to create the simultaneous feedback/AM/FM patch you've been dreaming of!
Read more
 5 in stock $171.80
Click for better price!
quote 732313
Cat: 744064 Rel: 12 Sep 19
 
Digital wavetable oscillator - 16HP
Notes: Klang Stadt is the latest FC iteration of Electric Druid's VCDO digital wavetable oscillator. It features a number of advantages over the previous Waverider design:

- Improved PWM filtering
- Addition of Sub Two output
- Addition of Klang output
- Addition of Xmod feature
- Onboard LFO for riding the waves
Read more
 1 in stock $219.41
Click for better price!
quote 744064
Cat: 744063 Rel: 12 Sep 19
 
CEM3340 based VCO - 10HP
Notes: CEMosc is here, a stable AS3340 based VCO which tracks beautifully, and is feature rich. Easy to build and calibrate too.

CEMosc features:

- Onboard voltage regulation for tuning and tracking stability
- A rotary octave switch as well as a fine tune knob
- Both manual PW as well as PWM are available
- Linear and Exponential FM inputs, each with attenuators
- Both soft and hard sync
- Sawtooth, Triangle and Pulse outputs
Read more
 1 in stock $184.22
Click for better price!
quote 744063
Cat: 719654 Rel: 12 Sep 19
 
Spring reverb module
Notes: Unique, vintage reverb sound.

The SPRINGREVERB module brings the unique sound of this quite old (introduced in the 60's) technique for creating reverbs to the AE modular.

IMPORTANT NOTE: This is only the module without spring tank and connection cable; with this module alone, you get no reverb. This is for users who want to use their own spring tanks.
Read more
 1 in stock $39.32
Cat: 728570 Rel: 16 Jul 19
 
26HP Eurorack spectral re-synthesiser module
Notes: Rossum Electro-Music Software Architect Bob Bliss (who also, as it happens, fathered E-mu's famed "EOS" Emulator Operating System) has created Panharmonium, a unique music and sound design tool that analyses the spectral content of any audio signal and uses that analysis to drive a bank of from 1 to 33 oscillators. Depending on various control settings, Panharmonium can accurately reproduce the input spectrum in real time or modify it in a multitude of wildly creative ways. All with an interface whose immediacy encourages performance and interaction.

Panharmonium input can be anything from a single oscillator to an entire mix (including vocals). From dense, swirling pads and drones that evolve with the input's changing spectrum, to clock-syncable spectral arpeggiation, to as-yet unnamed harmonic effects, Panharmonium opens up an entirely new world of sonic possibilities.

Additionally, Panharmonium can take a snapshot of an instantaneous spectrum and use that as a complex harmonic oscillator, which can then be modified and modulated by all of Panharmonium's other controls.

Panharmonium accomplishes its magic though a combination of functional submodules:

Spectral Analyser:

The Spectral Analyser provides tools for defining the analysis process.

- The Slice parameter sets the rate at which the incoming audio is transformed to spectral data. It can be set by the Slice and Multiplier controls, the Tap button, or by an external clock signal. Very short slice times result in real-time spectral data, while longer times can create rhythmic spectral patterns.
- The Centre Freq and Bandwidth controls (and associated CV inputs and attenuverters) control the range of frequencies to be analysed. The Bandwidth control allows the selection of narrow to wide pass bands on the left side of the pot and narrow to wide notches on the right side of the pot. The ability to sweep the frequency and modify the bandwidth under CV control opens up a wide range of sonic effects.
- The Freeze button lets you freeze the spectral integrator, sustaining the currently analysed spectrum.

Spectral Modifiers:

These controls allow you to creatively modify the analysed spectra.

- The Voice parameter lets you select from 1 to 33 oscillators to resynthesise the spectrum.
- The Blur parameter (and associated CV input) is a spectral lag processor that controls how quickly the spectrum can change.
- The Feedback control (and associated CV input) lets you route the re-synthesised audio back into the entire processing chain for subtle or dramatic feedback effects. At its max, the output becomes self-sustaining, even if the input is removed.

Oscillator Bank:

The Oscillator Bank resynthesises the analysed spectra.

- The Waveform parameter selects the oscillators' waveform. In addition to the usual sine, triangle, sawtooth and pulse waveforms, two special crossfading sine and sawtooth waveforms are included.
- The Freq control lets you tune the oscillators over a +/-7 semitone range. The frequency is further controlled by the 1V/Oct input and the FM input and attenuverter.
- The Octave control, not surprisingly, shifts the pitch of the output by octaves.
- The Glide parameter sets the amount of polyphonic glide (i.e., each oscillator has its own glide circuit).
- The Mix control (and associated CV input) sets the balance between the original input audio and the resynthesised audio.

Optional Functions:

A number of optional functions can be selected by using the Output Mode and Tap buttons.

- Holding the Output Mode button and adjusting the Slice control enables Drums Mode, which optimizes the spectral analysis for drums and other percussive inputs.
- Holding the Output Mode button and adjusting the Centre Freq control allows you to instead set the lower frequency of the analysis range.
- Holding the Output Mode button and adjusting the Freq control enables Spectral Warping. In contrast to conventional frequency adjustment, where the harmonic relationships between the spectral elements are preserved, Spectral Warping shifts the harmonic elements individually, producing a variety of clangourous, swarming textures.
- Holding the Tap button and adjusting the Freq control quantizes the resulting frequency adjustments to semitones.

Spectra Memories and Presets:

Panharmonium provides 12 user Spectra memories and 12 user Presets (in addition to 12 each factory memories).

- The Spectra memories let you store up to 12 frozen slices. When selected, a spectrum (up to 33 oscillators wide!) replaces any live input and can have its pitch controlled by the 1V/Oct input and FM controls.
- A Preset is a snapshot of all of the module settings, along with the value of any CVs present at the moment the preset is saved.

Panharmonium is 26HP wide and 25mm deep.
Power requirements (max): 140mA +12V, 30mA -12V. Reverse polarity protected.
Read more
 2 in stock $461.61
Cat: 731220 Rel: 15 Jul 19
 
Expander for the Demon Core Oscillator - 8HP
Notes: This module brings polyphonic control to the Demon Core oscillator.

The stacks can be divided between up to 16 polyphonic voices via MIDI or four 1V/oct inputs with attenuator. The oscillator can be set in continuous streaming mode or in MIDI gating mode with an ADSR envelope for each polyphonic voice.

The time sync can be also triggered via MIDI for each voice.
Read more
 1 in stock $246.32
Cat: 739049 Rel: 19 Jul 19
 
Headphone amp capable of driving high impedance headphones via a 1/4" stereo Neutrik jack
Notes: Outs enables your modular system to output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces. Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4dBu balanced professional line-level standard or the -10 dbV unbalanced standard.

Headphone monitoring is also provided via a low noise built-in headphone amp (with its own independent level control), capable of driving a wide range of impedances - from studio grade headphones to portable style earbuds.

To use Outs, simply connect the final output of your patch to the 1/8" inputs (where the built-in activity LEDs light up to indicate the presence and intensity of the input signal). The left input is normalled to the right, so you can create a stereo signal from a mono source. Or if you have an Intellijel Mixup, you can remove a jumper from its rear panel, and connect it to the Outs module using the 3-pin link cable included with the Mixup.
Read more
 4 in stock $137.66
Cat: 739050 Rel: 19 Jul 19
 
Three-channel active/buffered attenuverter & summing mixer
Notes: Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch.

Each input is normalled to a built-in precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch. Outputs A and B are also capable of a range of 0-10 / -10 to +10 when using the special function switches.

Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.

In addition, each channel has a "special function" switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.
Read more
 3 in stock $105.57
Cat: 736449 Rel: 15 Jul 19
 
Facilitates effects processing between eurorack, guitar pedals & electronic instruments
Notes: Want to connect outboard gear to your eurorack synthesizer without taking up valuable HP in your case? The INTRFX allows eurorack-level signals to be processed with pedals and/or outboard effects, and also allows line-level instruments to be processed with eurorack modules. Each of its three channels has an Interchange Switch to swap this mode, as well as an FX Blend parameter which can be controlled via CV. Because of its compact physical design, the INTRFX can be placed almost anywhere and connected to eurorack systems with 3.5mm patch cables rather than bulkier 1/4-in cables.

Feedback effects can be achieved by switching into the "wrong" mode, sending the FX return back into the FX send, while still allowing for dry signal blend and modulation. Channels can also be patched into one another and toggled between modes for experimental routing. Conveniently, each channel can operate as a reversed linear VCA for both audio and DC signals if no effects are used.

Whether you'd like to patch eurorack through some classic pedals or run a drum machine through your gnarliest modules, INTRFX makes these connections easy and flexible.
Read more
 7 in stock $205.97
Cat: 719655 Rel: 03 Sep 19
 
High quality stereo digital FX for AE modular
Notes: Stereo effects processing for Tangible's affordable AE modular system. Offers a total of 15 digital effect programs with CV control over three parameters each. Can run in Eurorack via an optional adaptor frame.

Supplier notes:
The MULTIFX module offers 15 different stereo audio FX programs, a wide variety from common FX like reverb and delay to unique effects like Ring Crusher or Glitch delay. Also a nice shimmer effect is onboard.

Each program has 3 parameters that can be adjusted and additionally be CV-controlled.

With a switch the sample rate can be reduced to half the normal rate, resulting in doubling the effect times (with reverb, delay...) and introducing a nice portion of aliasing.

It is based on the FV-1 DSP chip that is well-known from other FX-modules in the Eurorack world; the MULTIFX module offers the 7 factory programs of the chip plus 8 new and unique ones created by Tangible Waves.
Read more
 2 in stock $109.70
Click for better price!
quote 719655
Cat: 719650 Rel: 03 Sep 19
 
Analogue 16-step CV sequencer
Notes: The SEQ16 is a 16-step sequencer for controlling oscillator pitch and triggering envelopes.

Compared to "classic" analogue sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ16 has 5 knobs for pre-setting different CV's (= notes); each of the 16 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.

An additional feature is "accent"; this can be set for each step by turning the knob fully clockwise. If a step is set to "accent", a separate trigger output is set and also a gate repeat for the regular gate output can be selected (from one to eight repeats).
Read more
 1 in stock $85.89
Click for better price!
quote 719650
Cat: 742228 Rel: 05 Sep 19
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 1 in stock $263.93
Click for better price!
quote 742228
Cat: 739060 Rel: 29 Jul 19
 
Dedicated jack expansion module for use with the Stereo Out 1U module
Notes: 1/4" TRS jack panel in 1U for the Stereo Line Out 1U module.

If you don't own an Intellijel case with built-in compatible 1/4" jacks, then you need to purchase a Stereo Out Jacks 1U module, which connects via ribbon cable to the Stereo Line Out 1U module to provide 1/4" TRS output jacks for interfacing with other studio or stage gear.
Read more
 1 in stock $23.55
Cat: 732851 Rel: 22 Jul 19
 
Compact bucket brigade delay module - 3HP
Notes: Pico BBD is surprisingly great sounding (we were surprised ourselves), full analogue 4092 stage bucket brigade delay module; the smallest BBD in Eurorack. Besides nice and clean flanger and delay effects, at full CW settings of TIME and feedback knobs it can produce extreme sonic artefacts. Tweak knobs and enjoy!
Read more
 2 in stock $130.93
Click for better price!
quote 732851
Cat: 737960 Rel: 21 Aug 19
 
All-analogue dual stereo crossfader - 6HP
Notes: Stereo patching is becoming more common each day in the Eurorack Modular Synth System and we here at the shop are performing out a ton. Over the past couple years we consistently felt the need for a simple crossfader module that would allow users to switch between two stereo sources, add a stereo effect path, or easily mix a mono source with a stereo one. AXYS was born from this need.

Each crossfader features stereo inputs with normalling for mono to stereo uses as well as independent CV control. Control both crossfaders with one CV easily and decide how the Y will react to X's CV.

Easily transition between two performers similar to a DJ transitioning between decks with one channel and add some master buss effects with the other. Use one channel for adding stereo effects and the other to dial up some nice parallel compression. Perfect for live performance and momentary effect blasts. A simple easy to use module with tons of uses.

All analogue signal path keeps your tone intact and sounding the way you intended it to.
Read more
 3 in stock $231.84
Click for better price!
quote 737960
Cat: 719686 Rel: 02 Sep 19
 
Classic wavefolder for the AE system
Notes: This module is based on a design used also by Ken Stone for his CGS system; the original circuit dates back to a publication from 1973.

Basically, the WAVEFOLDER clips and folds the incoming waveform; usually, waveforms with little overtones (like triangle or sinewaves) are used as input. In general, by the clipping and folding, the signal enriches the input signal with more overtones.
Read more
 1 in stock $33.64
Cat: 742229 Rel: 05 Sep 19
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 1 in stock $270.12
Click for better price!
quote 742229
Cat: 739138 Rel: 16 Jul 19
 
Voltages expander for Permutation - silver faceplate, 6HP
Notes: Variant is an expander module based on the original Voltages expander for the Turing Machine. Variant adds two additional bipolar CV outputs (with modulation inputs) that are derived from Permutation's gate sequence.
Read more
 1 in stock $86.93
Cat: 743521 Rel: 01 Jan 90
 
***B-STOCK: Box opened, product unused***
Notes: Dual VCO:
Based on the classic SYSTEM-100M modular synthesizer, the SYSTEM-500 is a fully analog recreation of one of the most revered electronic instruments of all time. Newly designed in Eurorack format, the SYSTEM-500 delivers the classic character and functionality of the original with the advantages of a modern instrument. Built in the USA and assembled in Japan, the SYSTEM-500 is made to exacting standards with top-quality components and solid controls. And it's surprisingly affordable, turning the fantasy of finally owning this legendary instrument into reality.

Classic System. New Format:
The SYSTEM-500 consists of Eurorack format modules that you can mix and match in any combination to create the ultimate Roland modular synthesizer. Each module is completely analog and has been designed for maximum compatibility with the world of contemporary synthesizer and effects modules. The SYSTEM-500 is a compact, powerful system that opens up vast possibilities for sound design and musical exploration.

512 Dual VCO:
The 512 Dual VCO (voltage controlled oscillator) is a single module consisting of two voltage controlled oscillators. Each independent VCO produces frequencies across a wide range with 1V/octave tracking and dedicated pulse, triangle, and saw wave outputs. Variable pulse width is available via panel control or CV modulation. Each oscillator's frequency can also be synchronized to the other in weak or strong modes to achieve a unique "sync" sound.
Read more
 1 in stock $309.47
Cat: 739048 Rel: 29 Jul 19
 
Eurorack power supply module - 4HP
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.4A
-12V @ 1.25A
+5V @ 1.0A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
 2 in stock $132.47
Cat: 739891 Rel: 30 Aug 19
 
Intuitive pitch CV sequencer in 4HP
Notes: Ultra-simple 16-step Eurorack CV sequencer with randomisation option and storage for up to 16 patterns. Straight to the point business, all in just 4HP of rack space.

Supplier notes:
Small, easy-to-program sequencers are a bit of a rarity. Vox Digitalis is our answer to this issue. With intuitive displays and simple controls, VD is perfect for all your pitch CV needs. Set your sequence length, dial in each note, randomize, save and load 16 sequences -- VD does all the stuff the big sequencers do, just in 4HP.
Read more
 1 in stock $168.69
Click for better price!
quote 739891
Cat: 731183 Rel: 30 Aug 19
 
5U version of the Noise Engineering dynamic wavetable oscillator
Notes: Cursus Iteritas Magnus is an oscillator that works from a dynamically generated wavetable. It gives the user spectral-like controls over three different modes based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. Cursus Iteritas Magnus parametrizes a wide variety of sounds, but because the sounds are all based on orthogonal functions, it has a musical tone structure and can produce an extremely wide variety of harmonic sounds

Cursus Iteritas Magnus is the 5U version of Cursus Iteritas.
Read more
 1 in stock $400.53
Click for better price!
quote 731183
Cat: 741821 Rel: 05 Aug 19
 
Compact gate sequencer with eight steps - 4HP
Notes: Bin Seq is an eight-step switchable gate sequencer. Besides individual signals, it is also possible to notate tied events. In addition to clock and reset inputs, there are manual control options for both functions. A great utility module, which can not only be used to create simple beats, but to manipulate other sequencers or trigger modulators rhythmically as well.
Read more
 1 in stock $121.08
Click for better price!
quote 741821
Cat: 741570 Rel: 29 Jul 19
 
Dynamic rhythm generator module
Notes: Integra Funkitus takes up to four input rhythms and combines and modifies them into rhythm outputs. There are three modes: two based on probability and one on generalized logic combinations.

Feed up to four rhythms from a rhythm module (such as Numeric Repetitor) into the inputs.

Connect the gate outputs to percussion modules, then turn the knobs to control how the rhythms are combined and modified.

Size: 8HP Eurorack
Depth: 1 Inch
Power: 2x5 Eurorack
Draw +12V: 50 mA
Draw -12: 5 mA
Read more
 4 in stock $227.69
Click for better price!
quote 741570
Cat: 732846 Rel: 22 Jul 19
 
White noise generator - 3HP
Notes: Erica Pico Noise is a versatile noise and percussion sounds source. It consists of white a noise generator, a resonant VCF to generate various colours of the noise - from extremely dark ones to high pitched resonant sweeps and a VCA/decay envelope generator combination to create range of percussion sounds to emulate hi-hats, cymbals and even sine tone-based percussion, when the resonance is full up.
Read more
 2 in stock $131.43
Click for better price!
quote 732846
Cat: 732847 Rel: 22 Jul 19
 
LFO + highly stable S&H in one module
Notes: Erica Pico LFO/S&H is a full analogue modulations source - LFO and Sample and Hold - to provide some controlled randomness to your modular setup.
Read more
 4 in stock $93.14
Click for better price!
quote 732847
Cat: 738521 Rel: 22 Jul 19
 
4HP PSU connection module
Notes: If you decide to use rack ears to mount Erica Synths 84HP enclosure in the studio rack, you may want to access the PSU connection from the front of the case, instead of the top. The 4HP PSU connection module is the solution. PSU Input module is intended to be used with external PSUs which provide an output voltage from +9V to +12V ("+" in the centre).

For two row Eurorack enclosures (2x84HP), use a small screwdriver to disconnect the existing PSU connector from the blue terminal and connect the PSU connector module as shown on the photo.

For one row Eurorack enclosures (1x84HP), you will need a soldering iron to solder wires from the PSU connector module as shown on the photo. Make sure soldered wires do not touch the aluminium enclosure!
Read more
 2 in stock $19.15
Cat: 742231 Rel: 21 Aug 19
 
Versatile band-pass filter - 12HP
Notes: TRSHMSTR is a collaborative effort between WMD and electro-dance heavyweights MSTRKRFT. TRSHMSTR features an aggressive combination of band-pass filtering (FLTR) and distortion (DRV). The FLTR and DRV sections can be used independently or together to produce a wide variety of tone-shaping, from subtle distress to full-on acid destruction. The INs and OUTs of the FLTR and DRV sections are cross-normalled, so you can run your signal through FLTR and into DRV or vice-versa with no extra patching.
Read more
 1 in stock $231.84
Click for better price!
quote 742231
Items 1 to 50 of 68 on page 1 of 2
1  2  »

Filter

Saved Searches
Save current search
Release Date
Featured
Close