Search dance music

Notes: VCO:

- Tune: manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
- Oct: range switch -1 / 0 / +1 octave
- Mod: modulation depth (attenuator wired to the Mod. socket)
- Dest: switch that is used to address the modulation to frequency modulation (position FM) or pulsewidth modulation (positon PM), in centre positon no modulation
- PW: manual pulsewidth control for rectangle waveform, PW can be also modulated by the Mod. input as mentioned above
- Wave: waveform switch (sawtooth / off / triangle), the sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW or fully CW)
- 1V/Oct. (socket): external CV input for VCO frequency (1V/octave)
- Access to internal bus CV (via jumper, optional, please remove the bus jumper if this feature is not used to avoid unwanted frequency modulation as then the unused CV line of the bus works as a kind of antenna)
- Triangle core VCO, frequency range about 32Hz ... 8kHz

Balance unit:

- The balance unit is made of two VCAs which are controlled by the sum of manual Balance control and the balance CV input in the opposite direction.
- The audio input of VCA1 is hard-wired to the VCO output, audio input 2 is connected to the socket Ext.In.
- The output of the balance unit is used as audio input for the VCF
- Bal.: manual balance control, fully CCW the internal VCO is used, fully CW the external signal (Ext.In) is used, at centre position both signals have about the same level
- CV Bal.: CV input for balance (range about 0...+5V)
- Ext. In: external audio input for VCA2, about 5 Vpp level required for similar loudness as the internal VCO
- This socket is normalled to the internal VCO suboctave f/2 signal (rectangle with half the frequency), if no external signal is applied the suboctave signal is used as the second signal for the balance unit

VCF:

- 24 dB low pass
- Frq: manual frequency control
- FM1: frequency modulation depth (attenuator wired to the VCF FM1 socket, the socket is normalled to the internal Envelope signal and then FM1 controls the modulation depth of the internal envelope applied to the filter)
- FM2 (socket) : second CV input for VCF without attenuator (about 1V/octave), can be used e.g. for VCF tracking by connecting the same CV which is used also for the VCO frequency
- Res: manual resonance control (up to self oscillation)
- If the VCO is turned off (waveform switch = centre position, pulsewidth control = fully CCW or CW) and the VCF resonance is set to maximum the module can be used as a sine oscillator, the tracking at socket VCF FM2 is about 1V/octave (not as precise as the VCO but much better than most other filters)
- ~ 11 octaves frequency range (~ 10 Hz ... 20kHz)

VCA:

- Gain: manual amplitude control (initial gain), can be used to open the VCA without envelope signal
- VCA (switch): used to switch between gate and envelope as control signal for the VCA, in centre position the VCA is not controlled by envelope or gate
- Note: when gate is used the VCA is controlled directly by the gate signal (i.e. hard on/off), this may lead to clicking noise under certain conditions (especially with low VCO/VCF frequencies)
- Special control scale: exponential scale in the range from about -20dB to -80/90dB, linear scale from about -20dB to 0dB
- Remark: this special control scale results in a loudness behaviour that is a bit different from pure linear or exponential VCAs
- Out: audio output of the module (= VCA output)

Envelope:

- Gate (socket): Gate input (min. +5V), can be normalled to the bus gate signal by means of a jumper
- Att: manual control for Attack
- D/R: manual control for Decay/Release
- Env. (switch): used to switch between A/D, ADSR and A/R mode of the envelope generator, in centre position (ADSR) the sustain level is fixed to about 50%
- Envelope (socket): envelope output (about +10V)
- CVT (socket): CV input for time control, by means of two internal jumpers one can select which time parameters are controlled by the CVT input (e.g. A only or D/R only or A/D/R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question)
- Envelope LED display
- Attack time range: ~ 1ms ... 5 sec (can be extended by using the CVT input)
- Decay/Release time range: ~ 1ms ... 15 sec (can be extended by using the CVT input)

Notes: The module can record the joystick movement up to a length of over a minute. The sequence remains stored in the battery-backed RAM after switching off. When playing the sequence, it can be manipulated in speed and playback direction.

There is a FREEZE function to hold the current joystick position plus an external reset input. In addition, a GATE is set during movement and a CV voltage is output as a function of the joystick movement. The ranges of the X / Y output voltages are bipolar +/- 5v or unipolar from 0 to + 10v. Both channels X and Y have a passive attenuator potentiometer, so that the voltage range can also be set lower.

Notes: The smallest member of the polyphonic POG clan provides impeccable tracking and sound!

The EHX Nano POG can simultaneously generate multiple octaves from your input signal. Whether you play single notes, arpeggios, or full chords, the Nano POG will precisely track every note or chord that you play.

With the Nano POG, you can mix together your dry signal with two different octaves (one above and one below your original note) to create totally new, inspiring tones.

Separate level controls for dry, sub octave and octave up plus an extra Dry out and silent footswitching provide the perfect formula for this compact jewel.

Super, space saving design
Tracks chords, sweeps or single notes with no hitches or glitches
Great 12-string guitar sound or turn your guitar into a bass
Amazing organ-like sounds
Adjustable original pitch volume, one octave up volume and one octave down volume
Dry output jack in addition to the effect output jack
Silent footswitching and road worthy die-cast package
Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 25mA
Year Released: 2015

Notes: Inspired by the legendary UDG ProducerBag, the UDG Ultimate ProducerBag Large has been created to cater for those electronic musicians who crave more space for their performance equipment.

Fits: Pioneer DJM-S5, Toraiz SP-16, Denon DJ Prime Go, Novation AFX, Akai MPC Live II, Reloop Elite, Rane Seventy, Seventy-Two, NI Maschine Jam, and various pedalboards

The UDG ProducerBag Large offers increased space for performers using laptops up to 18.4" and larger MIDI Controllers. Constructed from high quality fabrics, the backpack style UDG ProducerBag Large features padded walls with an adjustable divider to create an internal partition to suit your own requirements. Available in black, the bag offers both comfortable transportation and padded protection for your valuable items.

Specifications

Colour: Black, Orange inside
Weight: 3,25 kg / 7.15 lbs
Outer Dimensions (W x H x D): 56.0 x 45.0 x 18.0 cm | 22.0 x 17.0 x 7.1 inch
Inner Dimensions (W x H x D): 46.5 x 32.0 x 15.0 cm | 18.3 x 12.6 x 5.9 inch
Material: Water Resistant Nylon 420D
Protection: Padded MIDI Controller compartment
Bottom guards fabrics protect from scuffing and abration.

Extras

6 pockets for Accessories and smaller gears
Top carry handles
Ergonomic detachable shoulder strap
Integrated combination lock.

Fits:

Up to 18.4" laptop
Pioneer DJM-S5, Toraiz SP-16, DJS-1000, DJM-750MK2
NI Traktor Kontrol S2 MK2, Maschine Jam/ MK3/ MK2, Traktor Z2
Denon DJ Prime Go, MC6000 MK2, MC3000
Numark iDJ Live II, Mixtrack II / Pro II
Rane Seventy, Seventy-Two
Akai MPC Live II, APC 40 MK2, MPD232, MPD26, MPD32
Reloop Elite, Beatpad/2, Beatmix, Digital Jockey-3, Jockey 3 Remix, Terminal Mix 2
Novation AFX, 25SL MK2, Launchkey 25, Nocturn 25
Hercules DJConsole RMX2, DJControl Jogvision, DJ Control Air+ S
M-Audio Oxygen 25, Trigger Finger Pro, Xponent
Stanton SCS.4DJ, DJC.4
Livid OHM 64
Vestax VCI-380/400/400DJ,
Arturia Drumbrute, Keylab 25
Various pedalboards

Notes: Small desktop enclosure for Eurorack modules with 42 HP space and a maximum depth of 32mm. A relatively strong power solution with an external power supply and an on/off switch located at the case is included.

The power supply provides:

- 850 mA at +12V
- 850mA at -12V
- 500mA at +5V

The power distribution has 14 connectors and the case can house exactly fourteen modules from Erica's Pico Series.

Notes: The Grado DJ200i is hand engineered for a premium quality rich warm and unique sound, the DJ200i is built and designed to meet the demanding needs of the professional DJ. A step above anything else in this price bracket and many cartridges priced significantly higher.

The Grado specially engineered transmission line cantilever allows for the ideal transfer of music signal and for safe and effective stylus back-cueing. The prestige model DJ200i uses a modified 4 x piece cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing for possibly, the most advanced DJ cartridges ever offered to the professional DJ market.

Notes: Envelope with filter with serious attitude

This mangled, filter-sweeping, abruptly overdriving pedal is designed to respond to your playing. It syncs its wave-thumping movement with the force at which you play. It multiplies dynamics into a hyper-exaggerated frenzy. It adds just the right amount of movement to punch through the mix and it reacts to an external trigger of your choosing to follow your tempo. Six selectable frequency ranges mean you're always gonna have just the right quack and oomph for whatever's plugged in! The sounds are wild, the thump is thick, and the animation is deep.

Controls

Input: Plug an instrument in to this jack.
Trig: Plug another instrument in to this jack and use it to trigger the filter sweep.
Out: Connect this to the amplifier.
Sensitivity: Determines the point at which the filter engages and the frequency range of the filter shift in relation to the input amplitude.
Intensity: Simultaneously blends in the resonance, amount, and grit of the filter.
Vol: Adjusts the output volume of the DEEP ANIMATION.
Frequency Selector: Selects the frequency range of the filter.
Bypass: True bypass the effect.
Up / Down: Controls the polarity of the filter decay once triggered. UP sweeps the frequency from higher frequencies to lower ones and DOWN, the opposite.
Additional Features: There is a subtle light to indicate the external trigger behind the main bypass LED.

Specifications

Dimensions: 5.92" x 4.72" x 2.34" (including hardware).
Weight: 21 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).
Current Draw: 18 mA.

Notes: Room #40

Marshall Mojo in a Box

Heavily inspired by the tone and feel of the following legendary Marshall amps: the non master volume series PLEXI Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP & JCM800 (2203/2204).

Over the years, Tsakalis have had many different types of Marshall amps on their workbench, some for repairs and others for customisation. Being huge fans of the sound of these classic amplifiers, Tsakalis decided to try and capture its mojo - the true essence of the soul of this sound - and carefully place it in a little box. Thus the Room #40 was born!

Using JFET technology, Tsakalis tried to stay loyal to the tone and feel of the following legendary Marshall amps: the non master volume series PLEXI Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP & JCM800 (2203/2204).

Tsakalis emphasized on emulating the compression and sag coming from the power amp section, when these amps are pushed to the edge, while at the same time giving access to two famous mods, mod #39 (PLEXI) and mod #34 (JMP & JCM800).

Finally, the Presence control was incorporated to make the sound adjustable to any circumstance, regardless of whether you are plugged into the front of an amp that may or may not have a bright cap or even straight to a power amp.

Product Height (cm): 5.600
Product Width (cm): 7.300
Product Depth (cm): 12.300
Product Weight (kg) 0.314

Box Height (cm): 6.500
Box Width (cm): 0.300
Box Depth (cm): 14.800
Boxed Weight (kg): 0.385

Notes: Experience - Fuzz Octave

Experience is a unique Fuzz & Octave up pedal that was designed to revive the sounds of the 60's and 70's with a modern touch.

It features 2 stand-alone channels in series (fuzz and octave) which can be used individually or together, offering a wide range of dirty goodness!

The Octave channel produces a classic and easy to manipulate octave up effect, sitar & harmonica like sounds, enhancing your tone with ringing octaves and micro-phonic feedback at the end of every note. It features separate volume and tone controls for a wide range of colours.

The fuzz channel is based on the Jordan Boss Tone fuzz circuit and is capable of producing a wide range of tones. From mild and creamy overdrive and classic fuzzy tones, all the way to heavily distorted goodness with sub octaves, similar to trombone and analogue synth! It is equipped with 2 vintage silicon transistors with FET clipping for richness and detail and four controls (gain, volume, tone and damage) with which you can adjust the type of distortion.

Combining the 2 channels is where the real Experience begins! Create your signature sound exploring the Experience's endless tonal capabilities!

Unleash your creativity and let the Experience do the rest...

Product Height (cm): 5.400
Product Width (cm): 10.200
Product Depth (cm): 12.400
Product Weight (kg): 0.360

Box Height (cm): 6.000
Box Width (cm): 1.000
Box Depth (cm): 14.800
Boxed Weight (kg): 0.445

Notes: Galactic - Multi Modulation

With the Galactic, Tsakalis wanted to create a unique modulation pedal which, lets you combine effects and blend them in a way that brings new textures to your sonic arsenal and creates potential for exploration!

The Galactic has five basic modulation effects - Phaser, Univibe, Vibrato, Rotary Speaker and Flanger - and made it possible for you to use them separately or in pairs, blending them together via a Blend control creating interesting effects from 3D chorus to many other spacey and yet to be named soundscapes. Find your sweet spot for each pair and discover an unexplored Galaxy of sounds and inspiration!

Three expression input jacks let you control the Speed and Depth of the effects, as well as how you choose to Blend them, making your live performance easier and letting you experiment even on stage!

Use the Galactic modulation to enrich your music with the sounds of the unknown!

Product Height (cm): 5.200
Product Width (cm): 12.700
Product Depth (cm): 9.900
Product Weight (kg): 0.369

Box Height (cm): 6.000
Box Width (cm): 1.000
Box Depth (cm): 14.800
Boxed Weight (kg): 0.448

Notes: The FUNCTION music synthesizer module is part of the MATHS family of control voltage utility modules. It is a small analog computer designed for solely musical purposes.

Features:

Generate a variety of linear, logarithmic, or exponential functions
Functions as short as 2ms and as long as 25 minutes per cycle!
Triggered Functions (Envelope)
Continuous Functions (LFO)
Invert and/ or Integrate (Lag, Slew, Portamento)
Discrete Time Functions (S&H, T&H)
LEDs indicate activity on all outputs
End of Rise and End of Cycle Pulses facilitate programming of more complex functions
All outputs capable of driving a passive 4 way mult without loading effects (no buffered mult needed here)
Perfect for modulating the DPO and just about anything else

Specifications:

Width: 8hp
Max Depth
(incl. power cable): 32mm
Power:
30mA@ +12V
20mA @ -12V

Notes: 44 watts of clean and natural power in a pedal-sized package!

The EHX 44 Magnum Guitar Power Amp head delivers 44 watts of clean and natural power but can also deliver a true amplifier overdrive at the turn of a knob. From your pocket to the stage, the 44 Magnum is the perfect gigging and practice solution. Despite being described as a "guitar head" the 44 has the character and control to work with any electric instrument. Flip the brightness switch for a more defined top end. The sweet tone with an extra power edge that can sit in any backline.

44 watts of power into 8 or 16 ohms
Tone switch toggles between a neutral, flat setting and a Musical top end boost
Maximum headroom potential
Can be driven to a natural, true amplifier saturation
Fits in the palm of your hand
Power adapter included

SPECIFICATIONS
Circuit
Analog
Audio
Mono
Power Supply
24VDC-3000mA power adapter included
Dimensions (in)
4.5 x 2.75 x 2.1
Current Draw
2000mA
Year Released
2010

Notes: The polyphonic SUPEREGO Synth Engine reinvents sample and hold, performs fluid glissandos and creates oscillator like, synthesizer effects. It can stack sounds or create infinite sustain, it even lets you tweak attack and decay, or use its effects loop to invent novel synth patches. Indulge your guilty pleasures!

*UK 230V power adapter included*

Notes: UDG presents the Urbanite Series, cutting edge bags for today's on-the-go DJ's / Producer's. Each design not only makes you feel good, they make you look great. The Controller Backpack lets you take a wide variety of your essential gear for your digital set up from one gig to the next. It lets you safely store your digital controller (Pioneer DDJ-SX3, Native Instruments S8) in the main compartment while in the side entry laptop compartment you can store up to 19" laptop. It has enough space in the two front pockets to store all your other necessities; hard drives, headphone, cables & accessories and is fully padded in all the right places for the ultimate in protection. The backpack has a 4-method carrying system. The UDG Controller Backpack is available in 2 sizes: Medium & Large skillfully designed to fit many different models of equipment safely during transport.

Specifications

Colour: Black
Weight: 3,95 kg / 8.69 lbs
Outer Dimensions (W x H x D): 73.0 x 43.0 x 22.5 cm | 28.7 x 16.9 x 8.9 inch
Inner Dimensions (W x H x D): 70.0 x 40.0 x 10.0 cm | 27.6 x 15.7 x 3.9 inch
Material: Water repellent laminated 600D Polyester exterior
Protection: Adjustable foam inserts to customize main compartment to your gear

Extras
4 compartments: main: for controller, side: for laptop up to 19", front: 2x for headphone, hard drives, cables & accessories
4-method carrying system
Easy grip zipper pulls
Convenient carry handle & padded shoulder strap

Fits:
Up to 19" laptop
Pioneer DJ DDJ-FLX6, DDJ-1000SRT, DDJ-800, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-RR, DDJ-SR, DDJ-S1, DDJ-T1
Pioneer DJ XDJ-RR, XDJ-R1, XDJ-Aero
NI Traktor S8
Denon DJ Prime 2, MC7000
Numark NS4FX, NS6II, NS6, 4Trak, N4, Mixdeck Quad
Rane One,
Reloop Mixon 8 Pro, Mixon 4, Touch
Roland DJ 505
or similar size controllers

Notes: Designed for handheld interview and presentation applications, the Reporter features an omnidirectional dynamic capsule that is designed to allow the user freedom of use, without the technique related issues typical of directional end-address microphones.

Additionally its frequency response has been specially tailored for voice reproduction, to maximise intelligibility and deliver crisp, clear results in almost any condition.

The microphone features a durable die-cast aluminium alloy body coated in a discrete matte black anti-glare finish. An innovative multi-layer mesh basket protects the microphone from environmental noise without the need for a bulky and distracting foam wind shield.

It is supplied with a removable microphone 'flag' that can accommodate high visibility branding.

The Reporter is covered by Rode's industry leading support guarantee, with a twelve month warranty 'out of the box' that is easily increased to ten years free of charge, following online registration of the microphone.

Notes: The 3rd generation of the Yamaha MG Mixer brings with it some neat updated features, great build quality and the same great sound and flexibility that we have come to expect from a Yamaha mixing console. Built with a sturdy metal chassis, the MG III series mixers are designed to last.

The MG-06X is a 6 channel mixer with 2 D-Pre Mic inputs for super-quiet operation. The MG-06X has +48v phantom power for condenser mics and XLR balanced outputs to ensure that no matter how big or small your operation is, the MG06X will act as the lynch-pin mixing desk that you can depend upon.

Also on the MG06X are a bank of Yamaha SPX effects to further enhance your sound with no need to add in additional processors.

Notes: The APEX Series Keyboard Stands represent over two decades of research and development and are used all over the world by gigging keyboard players and touring musicians. The AX-48 Pro offers everything keyboard players loved about the original APEX keyboard stand while offering a sleek new design and updated features that support a whole new generation of keyboards and workstations. The APEX Series is the finest-looking keyboard stand on the market, and shines the spotlight on keyboard players, while securely supporting their prized instruments.

Technical Specifications

Part Number
17476
Colour: Black
Height: 46" (1168mm)
Weight: 19 lbs. (8.6 kg)
Folded Length: 52" (1321mm)
Load Capacity: Up to 125 lbs. per tier (56.8 kg) or 250 lbs. total (113.6 kg)

Notes: The Native Instruments Traktor Kontrol F1 is the definitive hardware for controlling the powerful Remix Decks in Traktor Pro 2.5. You can launch clips in a perfectly intuitive, DJ-centric way - control Remix Decks just like regular track decks, switching between up to 64 x tracks, loops and one-shot samples on each deck. With your signature sound at your fingertips, it's time to blur the line between DJing and live performance.

The Kontrol F1 includes around 4 GB of premium grade sound, pre-loaded as Remix Sets. Or you can import your own samples, and even capture loops and sounds live, using the controller's stylish multi-color pads and ergonomic faders. Expand the creative potential of any Traktor set-up, with or without timecode vinyl, and transform your DJ set into a dynamic live performance.

The Traktor Kontrol F1 workflow is rooted in DJ culture. Remix Sets, made up of your individual loops and sounds, load just like regular tracks in the super-powerful Traktor Pro 2.5 software. And your drum loops, bass lines, percussion, vocals and lead sounds are ready for dropping into your performance.

4 x volume faders and four dedicated filter knobs provide full sonic access to the Remix Deck slots, and to add more flavor, you can route individual slots through Traktor's FX units. Scratch your live production via Native Scratch timecode control and then mix and fade into a traditional track on another deck, fuse classic DJ workflow with the future of DJing.

Just load up the included sound collection and dive into a new level of interaction with your music. The hardware and Traktor Pro 2.5 software respond as one. Ultra-tight integration is complemented by advanced visual feedback, assign a sample a particular color on the hardware, and see the software instantly follow suit.

The Traktor Kontrol F1's slim profile fits anywhere. Slot it between your mixer and decks or expand your controller set-up with multiple F1s, its intuitive feel and striking visual presence is matched only by its addictively fun playability.

Ready to remix also means you get around 4 GB of premium-grade loops and one-shot samples in the F1 package. This sound collection provides more than 10 x complete remix sets, packed with inspiring, studio-quality material for enhancing your sets, jamming and live remixing.

http://www.youtube.com/watch?v=aINKALs3Vso

The sonic spectrum includes beats, basses, leads, and more, spanning ten musical genres, including house, techno, dubstep, hip hop, tech house and drum'n'bass.

*** INCLUDES 44 POUNDS E-VOUCHER UPON REGISTRATION OF TRAKTOR KONTROL F1 WITH NATIVE INSTRUMENTS. TERMS AND CONDITIONS CAN BE FOUND HERE; https://www.native-instruments.com/en/support/e-voucher-terms-and-conditions-2017/ ***

Notes: DPLR is a delay module with two interactive delay lines, each with 750ms of delay time.

One input is split into two delays which share the total delay time (DELAY) and regeneration (REGEN). Side B has control over its delay offset (SPREAD) from side A.

Delay, Spread and Regen are all voltage controlled. Regen at max will echo indefinitely and can create interesting noise swashes.

The top knob toggles through seven different crosstalk configurations (Regen isolated by ping-pong). Press and hold to cycle through four different Regen Filter settings, from very bright to dark.

Two interactive delay lines
750mS delay time
Voltage controlled parameters
Seven crosstalk configurations
Four regen filter settings
Adjustable wet or wet/dry via jumper setting

Power consumption: 67mA at +12 V and 31mA at -12 V
Depth: 45
4 HP

Notes: Reverse-engineered from the original machine, our BD909 is an identical recreation of the original all-analog drum circuit of the TR-909. We've added additional controls and synthesis features that turn this classic circuit into a chest-pounding analog bass drum laboratory - all tightly packed into an 8HP module. The BD909 sound differs from our BD808 in that the main sonic energy is centered in the mid to low frequency range (as opposed to the low frequency range of the BD808). This frequency range gives the needed headroom allowing your bass Lines to deeply fill up the low end while the kick drum rides on top - creating a clear and punchy mix.

The BD909 includes all the controls found in the original: Attack, Decay, Tune Decay, Accent and Level. We have gone beyond that and added controls that further increase the palette of sound this circuit is capable of. First off, we've added a tuning control knob for the oscillator and included its own CV input and attenuator that let you tune your 909 kick with your bass lines. Next, we added control knobs for the tuning attack and extending tuning decay - each one affects the other, allowing for very intuitive and interactive sound shaping - this feature opens up numerous "sweet spots", and provides the ability to center the energy peak at different parts of the sound. Finally, we offer additional punch and distortion by giving complete control over the internal waveshaper, which allows you to overload the waveform manually or with voltage control.

Beginning with the classic and pure sound of the 909 kick, these additional functions greatly expand the BD909's flexibility and let it create powerful analog bass drums that range from soft and smooth to punchy and aggressive - and everything in between.

Notes: ZEDi-8 gives musicians, recording artists and venues the ruggedness and hands-on control of an analog mixer, paired with the versatility and convenience of a 2×2 USB interface. Whether it's bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZEDi-8 is a versatile companion for every step of the creative journey. Featuring the new GSPre boutique preamp design, developed from the revered GS-R24 studio recording console, the ZED boasts exceptionally low noise and massive headroom, with a signature analog warmth and depth. Guitarists will be pleased to know that ZEDi-8 comes with a pair of Guitar DI high impedance inputs, allowing guitars to be plugged straight into the mixer without the hassle and expense of carrying separate DI boxes.

ZEDi-8 offers the best of both worlds, incorporating a studio quality 2 in / 2 out, 24-bit/96kHz USB audio interface for hassle-free recording and playback to/from a Mac or PC, or to an iOS device using the iOS camera kit. The USB output source can be set up in several different ways to match your workflow. ZEDi-8 is class compliant with Mac and iOS.

ZEDi-8 comes with the acclaimed Cubase LE software. Cubase LE offers powerful yet easy-to-use software tools for audio recording, editing, MIDI sequencing and mixing. Its vast range of proven editing and sequencing tools can be used for a large range of music styles and areas of application. From singers and songwriters recording vocal lines to rock bands jamming in their rehearsal room, Cubase LE is as easy as it gets - with outstanding audio quality as well as time-saving recording and editing functionality.

The mixer also comes bundled with the Cubasis LE app. Cubasis LE is the compact version of Steinberg's streamlined, multitouch sequencer for the iPad, providing the same look and feel of its bigger brother Cubasis. Specially designed for quick and easy operation, Cubasis LE makes recording, editing and mixing a breeze.

ZEDi-8 features an exceptional new preamp design, created by analog guru, Mike Griffin and developed from his highly acclaimed GS-R24 studio recording console. Known as GSPre, the preamps deliver exceptionally low noise and massive headroom, and the warmth and depth that Allen & Heath's analog range is famous for. For tonal shaping, the precise MusiQ EQ controls have been carefully calibrated for responsiveness and precision, making it easy to shape and enhance each musical source.

All ZED mixers are designed and built to Allen & Heath's legendary touring grade standards to ensure a long life in the toughest environments. All channels are on individual, vertical circuit boards and all rotary controls are secured to the front panel with a steel nut to guard against impact damage.

ZEDi-8 comes with two Guitar DI high impedance jack inputs, allowing guitars to be plugged straight into the mixer without the need for DI boxes. That's one less piece of gear to buy, carry and set up.

Allen & Heath has been a trusted name in professional audio since 1969. The ZED technology advances, but the commitment to audio excellence and build quality endures.

Notes: The NT-USB is a highly versatile side-address microphone that is ideal for recording singing and musical performances in addition to spoken applications such as podcasting and voice-over.

It is fully compatible with all mainstream recording applications on both Windows and Mac OS based computers, as well as the Apple iPad using RODE Rec, GarageBand, or any other recording app that accepts an external microphone. Use on the Apple iPad requires a suitable USB connection adaptor, such as the Apple Camera Connection Kit.

The body of the NT-USB features a zero-latency stereo headphone monitoring (3.5mm) jack, which allows you to monitor the microphone input in realtime, along with dials to adjust the monitoring level and mix between the computer/iPad audio and the microphone input.

A premium pop-filter is included, which fits onto the base of the mic, positioning the filter the ideal distance from the capsule to minimise plosives (hard 'B', 'T' or 'P' sounds that produce a harsh sound) during singing or speech. Also provided is a high-quality stand mount with industry standard 3/8" thread, desktop tripod stand that allows the NT-USB to sit at a comfortable height on a tabletop, and a pouch for storage of the microphone when not in use.

Perfect for streamers and gamers, not just podcasters and voiceovers.

This product is compatible with the Rode PSA1 and the PSA1+.

Notes: The legendary Whammy pedal is the premier pitch-shifting pedal for any guitarist's board, and it only gets better with time. In addition to the classic Whammy sound, we've added chordal Whammy pitch-shifting and true bypass.

Whammy artists have won over 60 Grammysr using its unique pitch-shifting sound to enhance their music. Its songs echo the hallways of the Rock & Roll Hall of Famer and generate acclaim on over 700 million albums around the world. There is no doubt why Whammy is one of the most common sights on guitarists' pedalboards.

The Whammy can bring new depth to your artistry. Turn your solo into raging, rebellious screams of tone or tame your crowd with highly expressive, ambient chordal bends. Energize your audience with a scratchy note frenzy, bring them in and out of the sound tunnel with musical bursts, or carry them through an existential exploration of full-fretboard pitch translation. The Whammy puts expression into the expression pedal.

Don't be the last guitarist without a Whammy! The iPB-10 unleashes the ability to create and control guitar effects like never before.

General Specifications
Sample Rate44.1 kHz
Frequency Response20 Hz to 20 kHz
Signal to Noise Ratio> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
A/D Conversion24 bit
D/A Conversion24 bit
Power Consumption2.4 Watts (< 265 mA @ 9 VDC)
Power Adapter9 VDC External Adapter
Dimensions
Height2.5"
Width6.5"
Depth7.75"
Audio Output
Output Type1/4" Unbalanced TS
Max Output Level+10 dBu
Output Impedance1 kO
Audio Input
Instrument Input Type1/4" Unbalanced TS
Max Input Level+5 dBu
Input Impedance1 MO
MIDI Input5-Pin Din

Notes: The EVEN VCO is a voltage-controlled oscillator that offers stability and high precision tuning over 10 octaves. A redesigned temperature compensation circuit maintains the oscillator stable against voltage and temperature drops.

Specifications:

Current needs: +12V: 36mA, -12V: 26mA
Width: 8 HP
Depth: 22mm, (28mm DIY) including power connector
Aluminium, heat-treated front panel.
Designed, kits prepared and completed modules assembled in Barcelona.

Notes: The Sampling Modulator is a multi-function module that lies somewhere between a VCO, a Sample & Hold, and an 8 step trigger sequencer.

Sequencer Clocked Sample & Hold

In this mode it acts like a regular Sample and Hold (S&H) but since it is "sequencer clocked", it is capable of much more interesting patterns than the usual S&H melodies.

The CLOCK input can work in two ways: 1. As a typical clock 2. In "positive going hard sync" mode allowing you to create shuffling and polyrythmic effects.

The HOLD input can be used to keep certain notes playing.

Analog Down-Sampling Effect

In this mode (with the clock running at audio rates) you can go from nasty and harsh sampling rate reduction to an almost clean signal. (The clock run up to 25Khz without external CV and up to 200Khz with CV on the input).

Sampling Modulator/Shaper

Thanks to the V/Oct clock, by feeding a simple waveshape such as a sine wave to IN, and pitch CV to the VCO as well as to the Sampling Modulator CV input, their related frequencies and aliasing caused by the sampling rate reduction are capable of creating clangorous metallic sounds, 8 bit textures and much more.

The game becomes much more interesting when you try to destroy the wave by flipping on and off the switches of the sequencer (which at times can make it sound like three VCOs running in unison).

To understand how the Sampling Modulator works, keep in mind that we are working with a temperature compensated ramp core VCO with more than 4 octaves of tracking. This allows the timbre to stay the same while you move through the scale as the internal and external VCOs are synced in a fashion similar to "frequency related sampling rate modulation"

Unusual V/oct VCO You can use the trigger outputs as a pulse VCO. Flipping the switches on and off the switches can offer a lot of interesting timbral changes.

Notes: Module A-112 is the combination of a voltage controlled 8 Bit Sampler and a wavetable oscillator. On top of it the module is able to generate some special effects. A-112 was designed as an additional sound source with the typical sounds of the early 8 bit samplers and is not comparable with the modern polyphonic MIDI samplers available on the market.

Sampling mode: 8 bit audio resolution, 128kB memory in 2 banks 64kB each (equivalent to 2 seconds of sampling time for each bank with 32 kHz sampling rate), audio input with attenuator, overload display in record mode (gate LED), possibility of MIDI Dump to store sounds in a computer via MIDI, non-volatile memory for the 2 samples in the module, manual tune control for adjustment of sampling rate for record and play, CV input (~ 1V/Oct), both manual tune and CV determine the sampling rate respectively the pitch (pitch range is 5 octaves), gate input (not a trigger: the sample starts at the positive edge of the gate signal and is played as long as gate is high or until the end of the sample is reached), manual Gate button, non-filtered audio output (thus quantizing noise can be used as an element of the sound intentionally).

Wavetable mode: special appearance of the sampling mode when playing a sample, the audio input is now used as a second control voltage input for moving through the sample in 256 byte wide loops (wavetables). The control voltage required to move through all wavetables applied to the input "Wave CV In" is in the range -2.5V (wavetable 1) ... 0V (wavetable 127) ... +2.5V (wavetable 256) when control "Atten." is set fully clockwise. To achieve the typical wavetable oscillator sounds the sampling memory must contain corresponding wavetable data (e.g. loaded via MIDI dump). These data contain a set of wavetables with different harmonic content (e.g. a filter sweep) to get the typical wavetable sound while moving through the tables via CV. But you may also use a "normal" sample and go through the sample with CV to obtain partially amazing sounds never heard before. You may use for example sampled speech and go with CV through the syllables or speech shreds to get really very extreme sounds. An ideal addition for this feature is the Offset/Attenuator module A-183-2 which can be used to adjust the position of the wavetable (Offset) and the modulation depth (Att.). The corresponding jumper of the A-183-2 has to be set to bipolar offset (as the A-112 requires -2.5V...+2.5V to pass through all 256 wavetables). As modulation source an LFO (A-145, A-146, A-147, A-143-3), ADSR (A-140, A-141, A-142, A-143-1/2) or a random voltage (A-118, A-149-1) may be used. Even a ribbon controller (A-198 or R2M), the Theremin module A-178, the Joystick A-174 or the Wheels module A-174-2 are useful to drive through the wavetables.

Effects: Additionally, the module offers - in a way free of charge - some effects like delay, reverse delay, pitch shifting or freeze. But it has to be pointed out that due to the 8 bit audio resolution these effects are not comparable to high quality effect units and should be understand as an extra for nothing. The A-112 is not an effects unit!

The sampling time of the A-112 is about 1...30 seconds corresponding to a sampling frequency range of about 60kHz...2kHz (64kB@60kHz ~ 1 s, 64kB@2kHz ~ 30 s).

Technical note: the module uses a battery for the non-volatile storage of the sampling data. Batteries have a limited lifespan and have to be inspected at least every two years. For details please refer to the FAQ page of our website: Lifespan of rechargeable batteries (used for memory backup).

Notes: Sewastopol is a multifunction Eurorack module designed for easy interfacing of external gear to your modular environment. It can export line and professional level audio, import audio from instruments and electroacoustic transducers, and analyse the incoming audio to generate voltages and triggers to control your modular system.

This is a second, vastly improved revision to the original 2014 Sewastopol, featuring a completely redesigned preamplifier circuit, better ergonomics and various other improvements.

Notes: Clep Diaz is a handy and small step CV and LFO generator. In step and random modes, use the encoder to control the number of steps in the sequence; in LFO mode, the encoder controls the amplitude of the wave. Toggle the directionality of the sequence: up, down, or up/down to customize the CVs further. CD also gives CV control over the number of steps in the sequence and an end-of-cycle trigger output. Unipolar and bipolar outputs allow maximal control.

Notes: Listen Professional circum-aural closed back headphones are the essential work tool for music production. Their tonal balance and precision in terms of audio spectrum make them perfect to evaluate the sound work quality. In addition, their comfort and accessories will make them very attractive for people travelling on business trips. The sound quality and the dynamics of these headphones are very surprising considering that this quality is usually found on more expensive items. The attention to detail of these headphones can be also shown thanks to the various patents and technologies which belong to Focal. Hence, a brand-new driver membrane was developed. The main goal was to propose a solution which would keep all the dynamics from the original track while reproducing accurately every single detail on the whole audio spectrum. Even if Listen Professional headphones are closed, they produce a very lively sound, giving the feeling of semi-open headphones while still providing the isolation of closed headphones.

Focal's core expertise:

The speaker driver has been given a 100% Mylar suspension, whereas the central dome is composed of a Mylar-titanium alloy to provide more rigidity and extended frequency response in the upper end of the spectrum. Thus, the moving part is extremely light, enabling the transducer to exceed 40kHz on a flat baffle. The reproduction of the bass and sub-bass registers also received a great deal of attention. The team of engineers managed to combine two factors which are hardly compatible: a tuning frequency which is as low as possible and extremely low distortion (0.3% at 1kHz - 100dB).

Ear cushions - the ideal acoustics:

The size of the ear cushions (height, width and depth) gives them a volume which makes it possible to achieve a great tonal balance. Microfiber provides a more linear bass response providing a better acoustic output, whereas the acoustic tissue, which is closer to the speaker driver, offers great absorption and linearity in the 3-9kHz register. The bass and lower mid-range sections benefit from remarkable tonal balance and excellent articulation: where compression and frequency response generally suffer on closed-back headphones.

For a frequent and intensive use:

Listen Professional is also equipped with a headband boasting a unique design to ensure comfort and durability. Its curve remains consistent, regardless of the shape or size of the user's head. Combined with the layer of silicone underneath the headband, this ensures that the weight is spread out evenly over the head, preventing the user from feeling any pressure in certain areas, which can be very uncomfortable during long working sessions. The horizontal and vertical rotation of the ear cups operate thanks to one single part: a joint integrated into each one. The ear cups also feature a black structured covering, making them resistant to impacts and scratching.

Provided Accessories:

Rigid carrying case. Thermoformed shell in the shape of the headphones. Can store one cable and an iLok key (not provided), all within its compact dimensions. Two OFC copper 24AWG cables with a very low resistance.

- 5m spiral for domestic use
- 1.2m cable fitted with a 3.5mm stereo jack connector
- 3.5mm and 6.35mm jack adapter

Notes: Quality belt-driven DJ turntable with built-in USB port and phono preamplifier, for a high-quality and convenient digitization of analog vinyl records. Plug & play: no driver installation required, unit is identified automatically.

- Sampling rates of 44.1 kHz and 48 kHz in stereo, resolution: 16 bits
- Includes software for recording and editing
- 2 speeds, pitch control +/- 10%
- Large start/stop button
- Strobe lamp for exact speed adjustment
- Adjustable anti-skating
- Shock-absorbing feet
- Switchable phono/line output
- Delivery includes removable dust cover, pick-up system, RCA and USB cable
- USB 1.1 support
- Suitable for Windows XP, Vista,7, 8, 10 and Mac OS X

Notes: The Platform is a sophisticated, professional stereo compressor limiter that includes volume swell and tape reverse, plus overdrive. It's powerful for studio or post production work, yet compact enough to take to a gig!

The Platform's compressor/limiter enables the user to precisely tune their instrument's dynamics and provides controls for Volume, Attack, Release and Sustain plus pushbuttons for Hard or Soft Knee and the Limiter. Its foot-switchable overdrive section adds to the pedal's versatility with dedicated controls for Volume, Tone and Drive. (Volume) swell is controlled by a dedicated knob. As it's turned clockwise swell increases from zero and notes fade in more gradually.

The Platform is equipped for true stereo operation and can be used as Mono In and Out, Mono In and Stereo Out, or Stereo In and Stereo Out. The pedal includes a three color, bar graph, LED array with eight LEDs that display the compressor's actual gain reduction in real-time; they act in opposite to a VU meter. The Platform Stereo Compressor/Limiter comes with an EHX9.6-200mA power supply.

Notes: - CV & Gate inputs on 3.5mm mono jack sockets
- A to D conversion for main CV input is 16 bit high quality ADC
- V/octave, Hz/V or 1.2V/oct modes selectable
- Gate type can be selected as Gate or S-trig
- Aux1 & 2 inputs on 3.5mm mono jack (continuously variable or switch selectable)
- Auxes can select controller number
- Auto tune feature makes setup easy
- MIDI Out on 5 pin DIN socket
- Non-volatile memory EEPROM (no back-up battery required)
- 32 bit ARM processor

Comes with multi-regional power supply

Notes: Xkey Air

The Bluetooth Mobile Music Keyboard

Ultra Slim. Great Design.

Lighter than an iPad!

Xkey Air is made from rugged, brushed aluminium. The same material that is used in Macs.

It only weighs 610g (1.34 lbs) so you won't even know it's there. Pop it in your backpack, or use the optional Xkey carry case.

Mac. iPhone / iPad.

(PC and Android can be connected with the WIDI BUD accessory)

Slip Xkey Air into your backpack or carry case and you're good to go.
Connect it to your favourite device, launch your favorite app ... and your recording studio is open for business. Xkey Air is pro standard. But even if you're still learning to play the keyboard, you'll love the quality and features.

Wireless & Low Latency

Bluetooth 4 MIDI controller. Low latency!

Long Battery Life

Powered by a lithium battery for hours of music creation

Aluminium Body

Robust, high quality construction. Looks great. Same finish as a MacBook.
Customizable

Download the free Xkey Plus application. Configure your keyboard how you like it.

100% MIDI

Use Xkey with your favorite music apps on your favorite devices. Works out of the box.

Mobile Native

For iPhone or iPad. Compatible with hundreds of free and pro apps.

Polyphonic Aftertouch

Your pressure on the keys controls the effect individually. Professional studio standard feature.

Portable

Made for travellers and mobile users. Fit in any bag & case!


Regular Updates

Benefit from upcoming new features. Upgrade your Xkey online!


Smart Buttons

Octave Change, Pitch Bend, Modulation, and Sustain function buttons

Velocity Sensitive

Play loud with one hand, soft with the other. There's 128 levels of sensitivity.

Controls
25 full-size keys (2 octaves).
100% MIDI compliant.
Velocity sensitive.
Polyphonic aftertouch.
Pressure sensitive Pitch bend and Modulation buttons, with continuous MIDI control data.
Octave +/- push buttons.
Sustain button.
Rechargeable Lithium Battery.
Firmware upgradable via USB.
Configurable via Xkey Plus free app for iOS, Mac OSX, and Windows.

Connectors
MIDI: USB and Bluetooth.
Indicator LEDs: Activity, Connection state, Battery

Dimensions
Width: 388 mm (15.27 in)
Height: 135 mm (5.31 in)
Depth: 16 mm (0.62 in)
Weight: only 610 g (1.34 lb): less than an iPad!

Power consumption
~ 125mW / 25mA
Included in package
Xkey Air (25 keys)
CME Xkey Air 25 (Bluetooth) Quickstart Guide.
Micro USB cable.

Notes: The NU-X MG-400 builds on the success of the ground-breaking MG-300 compact multi-FX pedal, adding dual processors and delivering high-definition models and increased flexibility. Integrated effects sections include Drive, Amp Simulation, I.R cabinet simulation, Modulation, Delays & Reverbs with a host of options within each category. Audio modelling is based on the NU-X TSAC-HD algorithm, which delivers high-definition analogue circuit simulation for pro quality guitar tones. An expression pedal covers wah and swell effects amongst other possibilities. All settings can be edited onboard or via USB using the downloadable PC/Mac Quicktone software and then stored into one of 36 internal memory locations. For live or rehearsal backing, the built-in Jam function has a fully featured drum machine and phrase looper. To integrate with a DAW studio suite, the USB also functions as a high-quality audio interface, completing the studio-ready guitar rig. The main output can be stereo or mono for guitar amplifiers or D.I to studio equipment. There is an additional 3.5mm output for stereo headphones. Expanding the control surface has provided space for additional control footswitches for a smoother and more accessible live playing experience.

Specifications

Power supply: 9Vdc, 280mA pin-negative (adaptor included)
Inputs: 6.3mm jack (guitar), 3.5mm jack (aux input)
USB port: USB type-C for audio interface and PC/Mac editing
Sampling format: 48kHz, 32-bit
Frequency response: 20Hz - 20kHz (+/-1dB)
Outputs: L/Mono + R 6.3mm jack, stereo 3.5mm headphones
Latency: 1.1ms
Dynamic range: 108dB
THD: +N<0.03%
Input impedance: 470k ohms (Aux 10k ohms)
Output impedance: 1k ohm (Headphones 47 ohms)
Dimensions: 289 x 160 x 71mm
Weight: 920g

In the box

The box for this item contains:
MG-400 multi-FX pedal
9Vdc UK power adapter

Notes: This is an exact hardware replica of the Mutable Instruments Clouds.

Notes: 221.x2 is a clean and precise utility module that is equally at home mixing Control Voltage as it is audio. At its simplest, it is two independent 2-to-1 mixers that offer per-channel attenuation and inversion, as well as +6dB of gain available at the summed outputs. With a tap of the "All Mix" button, these separate mixes can be combined into a 4-to-1 mix at the "All Mix" output - meanwhile, the first 1+2 mix is still available at its respective summed output. A rear expansion input and output allows for combining multiple modules into larger systems.

In addition, each channel also offers a Direct Output that can be taken pre or post attenuation/inversion.

A 6-volt offset is normalled into the input jacks of channels 2 and 4. This voltage is available at the channel's Direct Output, as well as added to the mixed outputs. Useful as an offset for mixing with another CV signal, or simply as a voltage source.

Each summed output group has two blue LEDs for displaying the shape of the summed CV, and can also serve as signal present indicators for audio. Peak LEDs trigger at ~9.6V, allowing for a bit of headroom before things get out of hand.

Specifications:

Width: 10HP
Depth: 3.3 cm
Power: 133 mA @ 12V
129 mA @ -12V
Inputs/Outputs: All I/O is unbalanced
Input Impedance: 10 Mohms
Output Impedance: Mix Outputs: 330 ohms
Direct Outputs: 10 ohms

Notes: Superior 60 mm quad fader CV source including MUTE feature

The ACL Fader CV Source Module comprises 4 individual faders where each can generate a CV either going between 0 and +5V or 0 and +10V unipolar or -5V and +5V or -10V and +10V bipolar, selectable using 2 jumpers on the backside of the module.

Furthermore there are mute-switches for each channel accompanied with an dual color LED (green/red) which shows the channels mute status. When mute is activated or deactivated, short fade ramps will be generated as well as the fader itself is slightly slew-limited internally in order to generate a smooth CV.

This module is very useful to control VCA's or VC mixers like our VC Amp mix module.

Notes: The SC (Stereo Channel) is a single-channel stereo module for the CGM Eurorack mixer, fully compatible with every other product of this family.

It features a mono/stereo local output which makes it ideal for multitrack recording and advanced parallel processing.

Thanks to its advanced I/O configuration, it can work as stereo-to-stereo, mono-to-mono, mono-to-stereo, and stereo-to-mono.

The gain control and the two mono FX sends can work in pre or post-fader mode, and the pan pot can also work as a dual mono crossfader, making it suitable for blending two mono sources into a single mono sum.

All the parameters are voltage-controllable for creative mixing automation.

Mechanical mute, PFL, and Solo-in-Place complete the feature set suitable both for studio and live performances.

*The SC replaces the C as the primary single-channel CGM solution. The C module is now discontinued.

Notes: Beautiful closed-back headphones from Sennheiser, ideal for critical listening and mix applications. Not the cheapest, but sound on par with much more expensive options.

Supplier's notes:
The newly developed HD 300 PRO delivers a neutral, high-resolution working sound. Its huge depth of detail passes through even in the loudest of environments. Irrespective of whether you are editing, playing or composing music, and regardless of whether you're behind a drum kit, at the mixing desk, in a live setting or in the studio, the HD 300 PRO provides the details that you need for making good decisions.

The HD 300 PRO works at the same level of precision that you apply to your production. To make this possible, we have pushed its acoustic properties to the boundaries of physics and recalculated them. Firstly, it's linear frequency response. It doesn't interpret, but rather ensures neutral transparency - the basis for good decisions. Its sound pattern remains delicate and precise in every application - across the entire spectrum.

Secondly, we have reduced distortion, wobbling motions and partial vibrations of the diaphragm to a minimum. Together with highly sensitive transducers, this construction guarantees powerful and distortion-free reproduction even at high sound pressure levels. Not to mention the recalculated air volumes in front of the ear. The HD 300 PRO gives the sound a remarkably natural, three-dimensional quality.

The design of the HD 300 PRO represents a smart combination of wearing comfort and ambient noise attenuation. Its circumaural, viscoelastic earpads can barely be felt even after several hours. And they provide reliable protection even against very loud ambient noise. To achieve this, we have designed the acoustic unit to be more isolated than a monitoring set has ever been. Even after sessions lasting several hours, you will detect only its sound - not its weight.

What's in the box?

1 x HD 300 PRO headphones
1 x Cable (1.5m with 3.5mm jack)
1 x 1/4" Adapter jack
1 x Quick start guide

Notes: Dual channel analogue overdrive with real tube-like compression featuring 3 clipping options with carefully hand picked germanium diodes, smooth and sensitive to picking strength.

3 different gain levels from clear boost with a touch of dirt to high gain overdrive, full EQ with air control to manipulate the presence of your pickups, a MOSFET boost circuit lets you push your amp into natural breakup.

Order toggle switch to add volume or an extra gain stage.
Side A: BB style circuit with bass, air, treble, drive and volume control
Ge, Si and LED asymm clipping toggle
3 level gain toggle.
Side B: MOSFET boost +20dB with level control
A > B or B > A stack order toggle
Top mounted jacks

Notes: True bypass studio-grade compressor in small form factor offering full control of your overall tone. OTA based parallel compression with variable output current, input voltage controlling a carefully designed envelope circuit. Optimized for low noise operation.

Analogue compressor with OTA topology
Controls: Ratio, Threshold, Release, Attack, Brite (high cut), Level (compressed signal), Blend
Soft switch with relay bypass, momentary & latching operation
Top mounted jacks

Notes: Seeking to unapologetically tear apart the definition of a chorus pedal, Old Blood Noise Endeavors have created the BL-82 Chorus. An ode to delay time, this is a device with a variable clock control to shift between recognizable shimmering chorus and chaotic modulated delays.

Two delay lines, modulated by opposite synchronized LFOs, are combined in parallel and the timing of the delay lines, as well as the speed and depth of the LFOs, are all determined by one tactile slider. This allows you to instantly open up the modulated floodgates on the fly and go from well-known waves, to deeply unknown oceans of sound.

BL-82 is a chorus pedal, technically. It creates a swirling shimmery sound somewhere between chorus and flanger from a mono instrument signal. Its two delay lines are stretchable, and that's where the pedal's genre blurs from chorus into modulated delay into trailing pitch bending uncertainty.

The control set for BL-82 is dead simple. A Clock slider sets the timing of the entire system. The sample rate that determines signal fidelity, the centre delay time and the speed of the delay modulation are all affected as the slider slides. The interface is rounded out with feedback, volume, and mix add to an immediate experience that breaks open the boundaries of what it means to be a chorus and allows you to further craft the undulations of this mesmerizing device.

Notes: Everything sounds better with compression - whether you need a bit of extra pressure for your drum sounds or just that extra touch to make your modular mix more nimble and tight, the Erica Synths Stereo Compressor will make your live performances a joy. The module is optimized for percussion sounds and will be a great addition to any Erica Synths Drum module rig. The Stereo sidechain can be used to animate melodic layers on the beat and to truly bring your Basslines to life.

Features

THAT chip-based stereo compressor
DC coupled sidechain
Gain, Threshold and Compression Amount (Ratio) settings
Stereo Link for level detectors
Bypass switch
8 segment output level VU meter

Specs

Audio input level -5...+5V
Threshold -40dB to +10dB
Makeup gain -12dB to +12dB
Ratio 1:1 to 8
Power consumption +60mA, -22mA
Module width 10HP
Module depth 35mm

INPUT LVL; Adjust the input signal level to your taste
GAIN; This knob adjusts the makeup gain of the compressor
THRESHOLD; Set the compressor threshold
COMP. AMT;This knob adjusts the compression ratio
STEREO LINK; Sending hard-panned or significantly different audio levels on the left and right channels into the audio inputs may result in undesired left-right panning on the output of the compressor, because the level detectors on each channel will ensure a different amount of compression. With the STEREO LINK switch on, the level detectors on both channels are merged and the min/max function is engaged. This ensures equal compression on both channels.
PROCESS; The bypass switch allows for turning off the compressor instantly
8 SEGMENT VU METER; 8 segment VU meter gives a visual reference of the output signal
IN L / IN R; These are the L and R audio inputs
OUT L / OUT R; These are the L and R outputs of the module
SIDE IN L / SIDE IN R; These are L and R sidechain inputs. You can process each channel individually
SIDE OUT L / SIDEOUT R; These are the sidechain signal outputs - they are buffered copies of the sidechain inputs

Notes: Variable Pole analogue filter based on Asteroid Op VCF Tech

Model: Millipede Variable Pole VCF
Analogue Filter, Can easily get Brutal tones.

What does this do?

This is an analogue filter that uses two modern equivalent ssm2164 IC's v2164 from cool audio to do it's magic. This particular filter however allows the user to vary the phase of each pole or filter cell. There are four filter cells total. This is similar to the Blue lantern Asteroid Operator Station VCF. The Asteroid Operator Station VCF has 8 Static filter out puts. Those 8 flavors were found by exploring the circuit found on the millipede vcf and internally installing the resistor ratio for that flavor.

On the millipede vcf you are allowed to find more exotic flavors yourself. Operation is easy. You first have all the poles counter clockwise and the three switches set to mute. This will have the filter as a dark Low pass filter. Then you turn on a pole using the switch and turn the know to hear the change. Pole 3 by default is always on, otherwise there would have been no sound if all poles were muted. Having all the poles set clockwise and active easily gets you into brutal sounding tones in a good way.

There is an on board diode limiter circuit to help tame really harsh tones. This is activated by switch.

The audio input has some gain, so you don't always have it fully clockwise. There is also a capacitor selector switch just like my other filters. This modifies the rez peak.

Dimensions
13 HP
32 mm deep

Current Draw
58 mA +12V
56 mA -12V

Depth: 2.5 inches

Review: Amused To Death is the third studio album from Roger Waters outside of his work in Pink Floyd. As one of the fundamental creative forces in the prog behemoth, of course it's hard to separate his solo work from that most famous of bands, but this is indeed its own beast. At times it's an experimental space in which Waters uses space and minimalism to great effect, creating a foreboding sound peppered with speech samples and field recordings. There are of course plenty of more straightforward tracks too, like lead single 'What God Wants, Part 1'. This lavish issue of the 1992 album spreads the music out across four discs and comes in a box set format, a must-have for devoted Floyd and Waters collectors.

Notes: ZeKit is a 4 voice paraphonic microsynth, featuring a simple step sequencer, various digital waveforms, an analog VCF, VCA and two AR analog envelopes.

The instrument can be controlled using MIDI (notes & clock) and has both a sync and audio inputs. External audio sources can be mixed in or be processed through the VCF / VCA.

ZeKit is available in fully assembled version

This comes with the high quality aluminium case.

A universal power adapter is available as an option.

Please reuse any compatible 5V to 9V DC adapter you already have.

All Fred's Lab instruments are manually assembled in Germany.

ZeKit is an ultra-compact paraphonic monotimbral hybrid synth with 4 voices.

These are the detailed technical specifications of the machine.

Sound Engine
Digital part
Additive sawtooth synthesis
8 mono waveforms / 8 para waveforms
Filter tracking and glide modes
16bit / 250 kHz DAC

Analog part

12dB / Oct low & band-pass VCF
2 resonance level chill / acid
Optocoupler VCA
Analog A/D & A/R envelopes
Envelope looping and re-triggering

Sequencer

96 step sequencer, with up to 4 notes per step
External sync - MIDI clock or Sync (+ start / stop) over 3.5mm jack
16 user programmable patterns
Live pitch transposition and transition of the patterns

Controls

6 knobs - Cutoff, Attack, Decay, Accent, Release and Level
3 toggles - LP/BP, CHILL/ACID, VCF/MIX
7 switches - Wave, Options, Motifs, Sequencer controls

Connectivity

MIDI input - DIN5
Power input - 2.1mm jack 5V to 9V DC
Line / Headphones output - 6.35mm TRS jack
Clock & Sync input - 3.5mm TRS jack
Audio input - 3.5mm TRS jack

Mechanics

Dimensions: 127 x 92 x 56 mm - (w x d x h)
Weight: 315 grams
Power: 350 mW
AAA Battery holder (optional)

Notes: 4 stereo channel performance mixer with sidechain ducking

On-board compressor with external sidechain control voltage option to add proper dynamics to your mix

Stereo output for speakerphones or headphones with enough current to drive a wide range of headphones

available in 1U / 24HP version

Version 2 update (from original Cockpit):

Increased headroom

Improved sound quality

Daltonic friendly - the LEDs are blue/red instead of red/green

No TRRS jacks anymore

Available in Black and Classic Gold

New aluminum knobs on the black module version

Power consumption:
240 mA +12V
75 mA -12V
0 mA 5V

Dimensions:
6 HP
38 mm deep

Notes: Welcome to a new era of the most iconic fuzz/distortion sound the world has ever known. You know, that epically huge and super saturated tone (some might call it big and muffy) that has defined the signature sound of so many artists and countless records in the past few decades. It's arguably one of the pedals with the biggest impact on the entire industry, which has seen it modified over and over and over again. So much that you think it's all been done, right? Well, KMA Machines have a surprise for you right here!

Holding three different Gain Modes, a pre- or post-EQ Clean Blend, active Bass and Treble controls, a foot-switchable and expression-controllable parametric Mid-EQ as well as a switchable top-boost for even more raspy, grinding bite, CHIEF DISRUPTOR is the most flexible, beautifully balanced and LOUDEST muff-style pedal you'll ever hear!

Over the years, different muff drives had different levels of gain, so KMA Machines derived three major distinctive gain structures all based on what was thought to be the best versions. The Vintage Mode (VTG) will give you every shade of discrete overdrive, while the Tight Mode will give a more focused and modern tone with less bass and super crisp harmonics. Heavy Mode is the essence of what we all love about muffs. Heavy, sustaining and crazy thick fuzzy distortion, with bone-shaking lows and chewy mids. Just crank the Disruption (Gain) Control and you'll see this in action.

Tonal shaping was one of the true weak points of classic muff pedals, and this has been remedied with the Chief Distruptor. KMA Machines opened the gates to more modern tonal flexibility through the active Bass and Treble controls, which let you boost or cut highs and lows with up to 15 dB, while the parametric Mid-EQ with adjustable centre-frequency and level boost/cut allows you to fine tune the mids with extreme precision, for everything from classic scooped fuzz tones, modern mid-focused dirt tones and all the way to cocked-wah saturation.

You can take complete hands-free control of the Mid-EQ frequency via an expression-pedal. This lets you make instant tone changes on the fly, as well as unleash fast and quacky wah-like sounds or slow and enveloping phaser-like sweeps. If you feel like the filter needs to be more resonant for screaming synth-like sweeps or needs to be subtler, then you can adjust the Q of the Mid-EQ via an internal trimpot. The mids can also be turned on and off via the relay-based soft-switch, allowing you to kick in the mids for soaring solos, cutting chords or when you want to get filter freaky. Having super saturated mids and lows can sometimes result in a perceived loss of highs. To fix this, just engage the Top-Boost to give your high-mids a big push for more crunchy harmonics and bite to cut through any band mix. The Top Boost has been tweaked, but if you feel like it's either too loud or not loud enough, you can also adjust the Top Boost Level via an internal trimpot.

The gain control has been carefully balanced to achieve total control of even the slightest harmonic nuances. So, whether you're looking for low gain drive, crunchy medium gain rhythm tones, singing or saturated lead sounds or skull-crushing doom tones, the Disruption control can and will cover all of them! A lot of gain rules! But gain also means compression, and the more you compress your sound, the more your instrument will lose definition. To preserve your precious core tone the CHIEF DISRUPTOR sports a clean blend control and a toggle switch to define the insert position. Insert your dry signal before the EQ section for a more cohesive sound or place it post-EQ to keep your dry signal completely unaffected.

Last but not least, KMA Machines have implemented stacked headroom topology to keep the EQs from getting saggy when cranked, all which results in the tightest, most punchy and LOUDEST muff-style tone on the market. Go forth and empower your creative side, with tone that has true vision to inspire. If you are ready for a change in distortion history, then it's time to follow the CHIEF DISRUPTOR!

Notes: Designed to play nicely with guitars and synths alike, this OTA-based mono phase shifter excels at warm, characterful modulation. Three Eurorack-compatible patch points add creative options.

Supplier's Notes:
Lethargy derives from the greek word for forgetfulness, "Lethe". It is a state of being drowsy and dull. The feeling of having little energy or of being unable or unwilling to do anything.

Dreadbox LETHARGY is an OTA based Phase Shifter effect pedal suitable for fretted instruments and synthesizers, with eurorack patch compatibility.

100 mm wide
140 mm high
90 mA / 9 V DC / Negative Center

SPECIFICATIONS:

Circuit: Analog

Bypass: CMOS

Audio: Mono

Inputs / Outputs:
IN/OUT : TS Unbalanced 6.4mm jack
Manual / Rate / LFO Out : 3.5mm mini jack

Power Supply: 9VDC BOSS style center pin negative 2.1mm (NOT INCLUDED)

Dimensions (cm): 14 x 10 x 5.6

Current Draw: 90mA