100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 1 to 50 of 373 on page 1 of 8
1  2  3  4  5  6  7  8  »
Earth Quaker Devices Dunes V2 Mini Mega Ultimate Overdrive Pedal Earth Quaker Devices Dunes V2 Mini Mega Ultimate Overdrive Pedal Earth Quaker Devices Dunes V2 Mini Mega Ultimate Overdrive Pedal Earth Quaker Devices Dunes V2 Mini Mega Ultimate Overdrive Pedal Earth Quaker Devices Dunes V2 Mini Mega Ultimate Overdrive Pedal Earth Quaker Devices Dunes V2 Mini Mega Ultimate Overdrive Pedal Earth Quaker Devices Dunes V2 Mini Mega Ultimate Overdrive Pedal
Cat: 781639 Rel: 28 Jul 20
 
Overdrive pedal
Notes: Dunes is a condensed take on our highly popular Palisades "808-style" overdrive. All the glitz and glamour of the original Palisades has been stripped away, leaving only the bare essentials required for a rippin' mid-boosting transparent overdrive. It has all the great tone of the grown-up Palisades but with a simplified interface and a smaller footprint!

The Dunes features the same Gain, Tone and Level controls as the Palisades, along with Earth Quaker's favoured voice and bandwidth settings, as well as the Normal/Bright toggle. The selectable clipping Voices are: MOSFET for a tight crunchy sound (Palisades' Setting 3); Silicon Asymmetrical clipping for tighter light gain OD closest to the classic 808 sound (Palisades' Setting 4), and None, which goes from clean boost to gritty, pure op-amp distortion with a massive volume boost (Palisades' Setting 1). The two Bandwidth settings are Stock for the classic tone (Palisades' Setting 3) and Full Range for more low end (Palisades' Setting 5).

Controls:
1. Tone: Brighter clockwise, warmer counterclockwise

2. Voice: MF- MOSFET diode clipping, N- No diode clipping, Si- Silicon diode clipping

3. Gain: Adjusts the drive, dirtier clockwise, cleaner counterclockwise

4. Normal/Bright: Normal is a warm full tone, Bright is livelier tone with more chime

5. Volume: Sets the output level

6. Bandwidth: Left is brighter with more emphasis on the mids, right is full range for more low end

Tech Specs:

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies, are a;ways recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 16 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$254.77 SAVE 17%
 1 in stock $212.31
Click for better price!
or call +44 20 7424 1960
quote 781639
Earth Quaker Devices Disaster Transport SR Advanced Modulated Delay & Reverb Machine Pedal Earth Quaker Devices Disaster Transport SR Advanced Modulated Delay & Reverb Machine Pedal Earth Quaker Devices Disaster Transport SR Advanced Modulated Delay & Reverb Machine Pedal
Cat: 781635 Rel: 28 Jul 20
 
Reverb & modulation delay pedal
Notes: The Disaster Transport SR is a dual delay with reverb and modulation. It was designed from the ground up to create an intense wash of lo-fi swirling tape styled echo. While it may look intimidating at first glance, it's actually pretty easy to navigate. The top row of controls are for delay A and the bottom row of controls are for delay B. Delay A is a 600ms delay with modulation and delay B is a 300ms delay with reverb. Both delays can be run separately, in parallel, in series or in series/parallel. To take it one step further, there are also expression controls for the repeats on delay A as well as bleeding delay A into delay B. The switching was designed so each delay can be used individually or in tandem with both true bypass or trails.

In addition to being used as a straight delay, straight reverb, rhythmic delay, modulated delay and old school tape-style echo, the Disaster Transport SR can also be used to create a wide variety of wild sounds ranging from warped records, clanging flange, smooth chorus, echoed out squalls and various other-worldly effects that will blow your mind, man. If you are a fan of old school tape delay and crazy lo-fi sounds, you will get hours of enjoyment every time you plug into the Disaster Transport SR.

The controls for delay A and B are separated by row. The top row is for delay A and the bottom row is for delay B.

Time: Controls the delay time from about 30ms up to 600ms.

Repeats: Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation. This can also be controlled via an expression pedal. The Moog EP-2 is recommended.

Mix: Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when it's above unity.

Depth: Controls the intensity of the modulation, from no modulation to all out seasick pitch bends.

Rate: Controls the rate of the modulation. The LED for delay A flashes in time with the modulation to visually show where the rate is set.

Bleed: This feeds delay A into delay B, post reverb (see block diagram for visual explanation). Use this control for series or series/parallel operation to create rhythmic repeats, extra long delay time or an all out echo wash. This can also be controlled via an expression pedal. The Moog EP-2 is recommended. When using the bleed, experiment with the repeat controls on each delay line. Try using them in different settings, both together and individually, for different timing and textures.

Delay B Controls
Reverb: Controls the amount of reverb added to the input of delay B.

Mix: Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when it's above unity.

Repeats: Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation.

Time: Controls the delay time from about 30ms up to 300ms.

The switches for both delays switch the inputs only. The outputs are always connected. This allows you to have trails by always leaving the bypass switch engaged or to use the bypass switch as the master on/off for true bypass. Additionally, you can feed delay A in to delay B with the bleed control without having delay B switched on for a cleaner rhythmic delay.

Tech Specs:

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs
Current Draw: 107 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$416.77 SAVE 25%
 1 in stock $313.55
Earth Quaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Pedal Earth Quaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Pedal Earth Quaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Pedal Earth Quaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Pedal Earth Quaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Pedal Earth Quaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Pedal Earth Quaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Pedal
Cat: 781595 Rel: 28 Jul 20
 
Stereo reverb & delay pedal
Notes: The Avalanche Run is a dreamy stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to a control of your choice, including the toggle! The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in our precious Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that's just the beginning...

1. Time: This controls the delay time and goes from 0ms to just under 2000ms.

2. Repeats: Controls the regeneration of the delay, from zero repeats to near infinite.

3. Tone: Controls the tone for the delay line only. Roll off highs to the left, roll off lows to the right and get a flat response in the middle.

4. Mix: The is the volume control for the delay line. This blends in the wet with dry until 1 o'clock, 1 o'clock to 3 o'clock boosts the wet signal over the dry and 3 o'clock up brings down dry until it is fully wet when all the way up.

5. Expression Jack Assign Switch: Use this switch to map the expression jack to one of the assigned controls.

Decay: Controls the reverb decay length

R Mix: Controls the reverb mix

Time: This takes over for the delay time control and is DRASTICALLY different than the interface control. Using the expression pedal to control the time will give you all kinds of wild effects that can not be achieved by turning the knob.

Repeats: Controls the delay repeats

D Mix: Controls the delay mix

Toggle: This takes over for the toggle switch and will cross fade from forward delay in heel down position to reverse delay in toe down position.

6. Ratio Selector Switch: Selects delay subdivisions when time is set by the "Tap" switch.

1/1: Quarter Note

3/4: Dotted 8th

2/3: Quarter Note Triplet

1/2: 8th Note

1/3: 8th Note Triplet

1/4: 16th Note

7. Decay: Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.

8. Toggle Switch (Mode Selector)

Normal: This is the standard delay and reverb mode

Reverse: This is reverse delay mode with standard reverb

Swell: This is the volume swell mode

9. Mix: This is the volume control for the reverb. Blends in the wet with dry until 1 O'clock, 1 O'clock to 3 O'clock boosts the wet signal over the dry and 3 O'clock up brings down dry until it is fully wet when all the way up.

The expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper.

Using a Moog expression pedal, with the output adjustment knob all the way up, is recommended. Any other expression pedal is not guaranteed to work with the Avalanche Run.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

For best results, please use the included 9v center-negative 1-amp DC power supply.

Dimensions: 4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs
Current Draw: 410 mA
Input Impedance: 1 MO
Output Impedance: 100 O
Read more
MRP:$424.61 SAVE 24%
 1 in stock $324.44
Earth Quaker Devices Pyramids Stereo Flanging Device Pedal Earth Quaker Devices Pyramids Stereo Flanging Device Pedal Earth Quaker Devices Pyramids Stereo Flanging Device Pedal Earth Quaker Devices Pyramids Stereo Flanging Device Pedal Earth Quaker Devices Pyramids Stereo Flanging Device Pedal Earth Quaker Devices Pyramids Stereo Flanging Device Pedal Earth Quaker Devices Pyramids Stereo Flanging Device Pedal
Cat: 781712 Rel: 28 Jul 20
 
Flanger pedal
Notes: Pyramids is a Stereo Flanging Device with five presets, eight flanger modes, tap tempo, tap subdivision, a multifunction Modify control, positive and negative Feedback, and a variable Mix control, which is something you don't see on a flanger every day.

Built upon the same proprietary DSP architecture as the Avalanche Run™, Pyramids delivers convincing jet-engine roar, authentic through-zero tape-style warble, infinite barber pole sweeps, flexible I/O routing, and the ability to re-trigger the LFO cycle via footswitch opens up a fourth dimension of rhythmic possibilities that's sure to tickle your third ear.

Controls:
1. Manual: Controls the delay time of the modulated signal. Manual can also be controlled via expression pedal.

2. Rate: Controls the speed of the LFO as well as the rise time in Trigger Up mode and fall time in Trigger Down mode. The Rate control has three ranges of operation: Slow, Normal and Fast. These modes are selected by the Rate & Tap toggle switch.

3. Width: Controls the frequency range of the LFO sweep. You might also think of it as a depth control for the LFO.

4. Mix: This is the volume control for the modulated signal. The modulated signal gets louder when you turn it clockwise and quieter when you turn it counterclockwise.

5. Activate Footswitch: The activate switch features our Flexi-Switch technology! This relay-based true-bypass switch allows for momentary or latching operation.

6. Feedback: Regeneration control for the modulated signal.

7. Rate & Tap Toggle Switch: Normal (center position) is 1:1. The tempo you tap in is the tempo Pyramids will spit out. When set to Slow (left position), the tempo you tap is divided for a slower sweep. When set to Fast (right position), the tempo you tap is multiplied and delivers a faster sweep.

8. Modify: The behavior of this control depends upon which mode you're using:

Classic: Tone control for the modulated signal. Clockwise cuts the low end and allows the high frequencies to pass through. Counterclockwise cuts the high end and allows bass frequencies to pass through.

Through-Zero: Delay time for the unmodulated dry signal. This controls where in the LFO cycle the through-zero point occurs, which is where you'll hear the most drastic cancellation.

Barber Pole Up: Tone control for the modulated signal. Clockwise from center is a high pass filter. Counterclockwise from center is a low pass filter.

Barber Pole Down: Tone control for the modulated signal. Clockwise from center is a high pass filter. Counterclockwise from center is a low pass filter.

Trigger Up: Sensitivity control for the sweep. This controls how quickly the re-triggering reacts to your pick attack.

Trigger Down: Sensitivity control for the sweep. This controls how quickly the re-triggering reacts to your pick attack.

Step: Adjusts the glide between steps. Low Modify settings produce sharp, stair-stepped transitions between steps. Higher Modify settings introduce a smoother glissando effect.

Random: Adjusts the glide between steps. Low Modify settings produce sharp, stair-stepped transitions between steps. Higher Modify settings introduce a smoother glissando effect.

9. Tap / Trigger Footswitch: In Classic, Through-Zero, Barber Pole Up, Barber Pole Down, Step, and Random modes, this footswitch is a tap tempo control. In Trigger Up and Trigger Down modes, this footswitch triggers the effect whenever it is pressed.

10. Presets Rotary Switch: Selects between Live mode and one of five presets. Pyramids comes with our favorites programmed in, but you're allowed to re-write them if you want. We don't mind.

11. Mode Rotary Switch: Selects between Pyramids' eight flanger modes

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

For best results, please use the included 9v center-negative 1-amp DC power supply.

To use with multiple output transformer-balanced isolated pedal-specific power supplies, Pyramids' may be powered from two outlets combined using a current-doubling cable. DO NOT USE A VOLTAGE-DOUBLING CABLE BECAUSE THAT WILL SEND 18V TO PYRAMIDS AND FRY IT LIKE AN OVEREASY EGG AT A GREAZY SPOON DINER.

Dimensions: 4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs
Current Draw: 460 mA
Input Impedance: 1 MO
Output Impedance: 100 O
Read more
MRP:$424.61 SAVE 28%
 1 in stock $303.76
Earth Quaker Devices Space Spiral V2 Modulated Delay Device Pedal Earth Quaker Devices Space Spiral V2 Modulated Delay Device Pedal Earth Quaker Devices Space Spiral V2 Modulated Delay Device Pedal Earth Quaker Devices Space Spiral V2 Modulated Delay Device Pedal Earth Quaker Devices Space Spiral V2 Modulated Delay Device Pedal Earth Quaker Devices Space Spiral V2 Modulated Delay Device Pedal Earth Quaker Devices Space Spiral V2 Modulated Delay Device Pedal
Cat: 781722 Rel: 28 Jul 20
 
Delay pedal
Notes: The Space Spiral is a dark and dreamy modulated delay designed to take you across the highways of fantasy. While the delay may be designed around a "dawn of digital" echo processor, the sound is out of this world, man. If you are a fan of the dreary echoes produced by old oil can delays or the ethereal sound of a well-loved tape delay, the Space Spiral is totally going to tickle your tone bone.

The Space Spiral's delay time ranges from a tight 30ms to a fast and loose 600ms. Can you imagine having 600ms of delay time at your fingertips? Out of this world! With all of this adjustable delay time you create anything from a classic slapback to a rhythmic wash of cosmic proportions. You want to take it even further? Maybe to an astral plane? Crank up the repeats and let the infinite oscillation of the Space Spiral take you to the other side.

Space Spiral- It'll get you through the night.

Controls:
1. Time: Delay time goes from 30ms to 600ms; Clockwise for long and counterclockwise for short.

2. Repeats: Controls the regeneration of the delay signal. Repeats increase clockwise and gradually begin to build into self-oscillation around 3 o'clock. This oscillation will infinitely continue until the Repeats control is brought back down below the 3 o'clock threshold. These oscillations will last even when the pedal is in bypass mode.

3. Mix: Blends the delay signal in with the dry; Clockwise for more and counterclockwise for less.

4. Depth: Controls the desired amount of modulation; Clockwise for more and counterclockwise for less.

5. Shape: Morphs the wave shape from a soothing triangle shape to a choppy square shape as you turn clockwise.

6. Rate: Controls the speed of the modulation; Clockwise for fast and counterclockwise for short.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 38 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$259.99 SAVE 21%
 1 in stock $205.77
Earth Quaker Devices Spatial Delivery V2  Envelope Filter With Sample & Hold Pedal Earth Quaker Devices Spatial Delivery V2  Envelope Filter With Sample & Hold Pedal Earth Quaker Devices Spatial Delivery V2  Envelope Filter With Sample & Hold Pedal
Cat: 781724 Rel: 28 Jul 20
 
Envelope filter pedal with sample & hold module
Notes: The Spatial Delivery is an oddball, a voltage controlled envelope filter that allows you to step outside the universe of funk while reinforcing your secret love affair with auto-wah. It has 3 modes: Up Sweep, Down Sweep and Sample and Hold.

With Range, Resonance and Filter controls you can get super emphasized filter sweeps in the Up and Down modes. The Range, in combination with pick attack, controls the sensitivity and reaction time of the envelope and thus the width of the frequency sweep. The higher the Range and harder the attack equals a faster reaction time and higher frequency sweep and vice versa. Reign in the controls a bit, add your favorite overdrive/fuzz after the Spatial Delivery and you've got a real nice resonant, cut-through-the-mix lead tone. Crank the controls back up and you're a neo-bedroom rock god. In the Sample and Hold mode the filter is controlled by random voltage and the Range controls the speed. Add a sub octave into the mix (before or after) and you've just created a deep fried space droid computer freak-out. The filter can be cross faded between high pass (counterclockwise), band pass (center) and low pass (clockwise) for a wide variety of voices. The Resonance control goes from zero to the brink of oscillation and adds more body and ring to the filter voice.

Controls:
1. Range: Adjusts the sensitivity of the envelope in Up and Down mode. In Sample and Hold mode, this controls the speed.

2. Mode Toggle: This toggles between Upward Sweep, Downward Sweep or Sample and Hold.

3. Resonance: This is the filter feedback control, it adds more body and ring to the filter voice.

4. Filter: This crossfades between high pass and low pass filters and allows you to get everything in between. High pass is fully counterclockwise, low pass is full clockwise and center is band pass. This is much more useful than a simple switch because it allows you to blend the filters for different sounds!

Suggested Placement
We recommend placing the Spatial Delivery first in your signal chain. However, due to its envelope control, experimenting with pairing and signal chain placement can take the potential of the Spatial Delivery even further.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 68 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$259.99 SAVE 18%
 1 in stock $212.58
Click for better price!
or call +44 20 7424 1960
quote 781724
Earth Quaker Devices The Depths V2 Analog Optical Vibe Machine Pedal Earth Quaker Devices The Depths V2 Analog Optical Vibe Machine Pedal Earth Quaker Devices The Depths V2 Analog Optical Vibe Machine Pedal Earth Quaker Devices The Depths V2 Analog Optical Vibe Machine Pedal
Cat: 781628 Rel: 28 Jul 20
 
Optical vibe machine pedal
Notes: The Depths is Earth Quaker Devices' take on the classic optical vibe circuit. Now you can swab the decks with the same lush, pulsating, three-dimensional swirling sound you know and love, with some modern accouterments for all you land-lubbers out there.

The Depths is optimized for use with all kinds of instruments, pickups, and to play well with dirt, so nobody's left waiting on shore. If it's got a 1/4" output, plug it in and get deep!

Controls:
1. Intensity: This controls how subtle or intense the overall effect is. Counterclockwise from noon are the more subtle, classic sounds. Clockwise from noon are the more drastic and intense sounds.

2. Voice: Dials in the overall sound. Turn it clockwise for a fuller sound with more lows, bring it back for a thinner, more midrange focused tone.

3. Rate: Controls the speed of the effect. Counterclockwise for slow, clockwise for fast.

4. Level: Controls the volume of the effect. Unity is around 1 o'clock, everything above that is boost.

5. Throb: This controls the low end pulse. It may not be immediately evident on the bridge pickup, but switch to the neck or add some dirt and it comes alive. All the way up for more throb, dial it back for less. Works best when the Voice is set to a warmer tone.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9-18 volt DC power supply with a 2.1mm negative center barrel. Pedals will make extra noise if there is ripple or unclean power. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 21 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$259.99 SAVE 18%
 1 in stock $214.20
Click for better price!
or call +44 20 7424 1960
quote 781628
Earth Quaker Devices The Warden V2 Optical Compressor Pedal Earth Quaker Devices The Warden V2 Optical Compressor Pedal Earth Quaker Devices The Warden V2 Optical Compressor Pedal Earth Quaker Devices The Warden V2 Optical Compressor Pedal Earth Quaker Devices The Warden V2 Optical Compressor Pedal Earth Quaker Devices The Warden V2 Optical Compressor Pedal Earth Quaker Devices The Warden V2 Optical Compressor Pedal
Cat: 781755 Rel: 28 Jul 20
 
Comrpessor pedal
Notes: Hey boss, thanks for taking a visit from The Warden! The Warden is an optical compressor with a feature set usually reserved for studio grade units. Built with high grade components and internally powered by 18v, The Warden has loads of gain and sustain on tap. With complete control over attack, release, sustain and ratio, The Warden will allow everything from a heavy squash with fast attack and release to "barely there" subtle compression. Optical compression has a reputation for having more character than a VCA or FET-based compression and The Warden is no exception.

Controls:
1. Tone: This pedal was designed to slightly color your tone, and the coloration can be dialed-in to your taste. Counterclockwise is treble cut, clockwise is treble boost. The tone is nearly flat around 11 o'clock.

2. Attack: This controls how quickly the compressor reacts and starts leveling the signal. All the way counterclockwise is a fast, nearly immediate reaction. Turning the attack clockwise slows the reaction time.

3. Release: This controls how long it takes the signal to raise back up to the level determined by the Sustain and Ratio settings. All the way counterclockwise is a fast release and the release time slows as you turn it clockwise.

4. Level: This controls the overall output and is affected by the Sustain and Ratio settings. There is no specific unity setting; adjust to taste when you find your perfect compression setting.

5. Ratio: This determines how much the gain reduction affects the signal. All the way up is full compression and the compression is reduced as you turn this counterclockwise which allows more of the boosted, less-compressed signal to come through. There are no defined ratios here.

6. Sustain: This is the heart of The Warden. It controls how hot the signal is, which changes the dynamics of the compression. The Warden is a feedback-style compressor; the hotter the signal, the more active the compression. Very little Sustain= very little compression, less active Attack and Release and a cooler signal. Max Sustain= heavy compression, longer sustain, hotter signal and more lively Attack and Release.

Tech Specs:
Switching
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 31 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$259.99 SAVE 14%
 1 in stock $223.19
Click for better price!
or call +44 20 7424 1960
quote 781755
Earth Quaker Devices Data Corrupter Modulated Monophonic Harmonizing PLL Pedal Earth Quaker Devices Data Corrupter Modulated Monophonic Harmonizing PLL Pedal Earth Quaker Devices Data Corrupter Modulated Monophonic Harmonizing PLL Pedal Earth Quaker Devices Data Corrupter Modulated Monophonic Harmonizing PLL Pedal Earth Quaker Devices Data Corrupter Modulated Monophonic Harmonizing PLL Pedal Earth Quaker Devices Data Corrupter Modulated Monophonic Harmonizing PLL Pedal Earth Quaker Devices Data Corrupter Modulated Monophonic Harmonizing PLL Pedal
Cat: 781617 Rel: 28 Jul 20
 
Harmonizing pedal
Notes: The Data Corrupter is a monophonic analog harmonizing PLL with modulation. It takes your input signal and brutally amplifies it into a crushing square wave fuzz tone that is then multiplied, divided and modulated to create a wild, yet repeatable, three-voice guitar synthesizer.

The Master Oscillator is the central nervous system at the heart of the Data Corrupter's cyberpunk hive mind. It feeds your input to the signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2) for maximum compatibility with your preferred instrument and frequency register. Once you've chosen your input octave, then the Data Corrupter will perform its calculations and spit out an analog synthesized frequency, which can be pitch-bent for portamento or vibrato sounds by the Frequency Modulator! From there, you can blend in one of eight Subharmonic intervals up to three octaves below the input and mix in a square wave fuzz tone for maximum data corruption.

The Master Oscillator (1) is the central nervous system at the heart of the Data Corrupter's cyberpunk hive mind. The three-position switch on the Master Oscillator control panel labeled Root (2) feeds your input to the signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2). Use the Master Oscillator's Root Switch to fine tune the Data Corrupter's tracking response for maximum compatibility with your preferred instrument and frequency register. Once you've chosen your input octave, the Data Corrupter will perform its calculations and spit out a synthesized frequency, the octave and/or interval of which may be selected via the Master Oscillator's eight-position rotary switch.

The Voice Mixer's Oscillator Control (3) adjusts the Master Oscillator blend.

The Frequency Modulator (4) applies pitch-bend modulation to the Master Oscillator. In Glide mode, you'll hear a smooth portamento as each note slides into the next. In Vibrato mode the pitch modulates up and down for a retro sci-fi laser effect.

The Subharmonic (5) assimilates the input signal into one of eight lower octave programs between one and three octaves below the original. For a more stable lower octave, set the Subharmonic's Root Switch to the Unison position, which divides the Square Wave input signal, and removes the Frequency Modulator from the Subharmonic signal path.

To unleash the cracked machine lurking within the mainframe, set the Subharmonic Root Switch to Oscillator and try not to look away as the sonic malware you just installed mangles your input signal into the sum and difference of both the Master Oscillator and Subharmonic with the Frequency Modulator applied to the upper and lower octaves.

If you think you're brave enough, set the Subharmonic Root Switch to Oscillator and try experimenting with different Master Oscillator and Subharmonic programs to wind up the doomsday clock and inch ever closer to the Singularity. Adjust the Voice Mixer's Subharmonic Control to set the lower octave volume.

Finally, (or is it?) the Square (6) control located top-left on the Voice Mixer blends in a fuzzed-out square-wave take of your input in its original octave.

The heart of this pedal is based around a CMOS Phase Locked Loop (PLL) IC. In a nutshell, the PLL takes your input signal and compares its phase and frequency against an oscillator, generates an output proportional to their difference then feeds it back to the oscillator. This then causes the oscillator to lock onto the input signal and generate a synthesized frequency. Pretty cool, right? This synthesized frequency is referred to as the Master Oscillator on the Data Corrupter.

This device takes its inspiration from the Electrax Synthax and the "Basic Frequency Synthesizer" by Ray Marston. Neither of these were really intended to be guitar effect pedals and a lot of work went into creating the Data Corrupter to provide excellent tracking and long sustain. We think you'll find it more expressive and accurate than pretty much any other PLL based effect pedal around.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Dimensions: 5.65 x 4.75 x 2.25 in. (144 x 121 x 57 mm) with knobs
Read more
MRP:$299.19 SAVE 21%
 1 in stock $236.25
Earth Quaker Devices Grand Orbiter V3 Phase Machine Pedal Earth Quaker Devices Grand Orbiter V3 Phase Machine Pedal Earth Quaker Devices Grand Orbiter V3 Phase Machine Pedal Earth Quaker Devices Grand Orbiter V3 Phase Machine Pedal Earth Quaker Devices Grand Orbiter V3 Phase Machine Pedal Earth Quaker Devices Grand Orbiter V3 Phase Machine Pedal Earth Quaker Devices Grand Orbiter V3 Phase Machine Pedal
Cat: 781668 Rel: 28 Jul 20
 
Phase machine pedal
Notes: Grand Orbiter is a 4 stage OTA-based phaser with a diverse feature set that can go from stationary and resonant to slow and mellow and on through fast and swirly. It has three way toggle switch to select between the ranges of modulation. The master Rate control fine tunes the speed of the LFO in each of these modes and the flashing red LED acts as a visual indicator, even when the effect is in bypass mode. The Depth control blends the shifted signal in with the dry signal and controls the intensity of the effect. The Sweep control governs the peak frequency of the phased signal's tone, turned full clockwise the sweep is lively and intense, whereas turning counter clockwise yields a darker, more laid back peak. The Resonance provides a wide range of control over regeneration and at higher settings adds a more pronounced and resonant tone. You can also use the Grand Orbiter as a true pitch vibrato with the "Phase/Vibrato" switch. When in "Vibrato" mode, the dry signal is removed and the Depth controls acts as a volume control. This pedal is 100% analog, true bypass and built by entirely by hand in beachy Akron, Ohio.

1. Sweep: Controls the frequency peak of the sweep. Higher peak clockwise, lower peak counter clockwise.

2. Rate 1,2,3: Changes the range of the speed control. Rate 1 is slow mode, Rate 2 is LFO kill to use the Orbiter as a fixed resonant filter, Rate 3 is fast mode.

3. Rate: Controls the speed of the LFO. Faster clockwise, slower counterclockwise.

4. Depth: Controls the amount of phase effect mixed with dry signal. Clockwise for more intense phasing, counterclockwise for less. In "Vibrato" mode, this acts as a volume control.

5. Phase/Vibrato: Cuts the dry signal to create a vibe/vibrato effect depending on the setting of the other controls. Vibrato is created by turning the resonance down low.

6. Resonance: Controls the regeneration of the phased signal. More resonant clockwise, more subtle counterclockwise.

Tech Specs:

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 15 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$259.99 SAVE 25%
 1 in stock $194.89
Earth Quaker Devices Night Wire V2 Harmonic Tremolo Pedal Earth Quaker Devices Night Wire V2 Harmonic Tremolo Pedal Earth Quaker Devices Night Wire V2 Harmonic Tremolo Pedal Earth Quaker Devices Night Wire V2 Harmonic Tremolo Pedal Earth Quaker Devices Night Wire V2 Harmonic Tremolo Pedal Earth Quaker Devices Night Wire V2 Harmonic Tremolo Pedal Earth Quaker Devices Night Wire V2 Harmonic Tremolo Pedal
Cat: 781691 Rel: 28 Jul 20
 
Tremolo pedal
Notes: The Night Wire is a feature-rich harmonic tremolo. What is harmonic tremolo? In short, the signal is split into high pass and low pass filters, then modulated with an LFO that is split 180 degrees. The Night Wire takes the traditional harmonic tremolo a few steps further by allowing the center point of both filters to be adjusted for different tones. The filter frequency has three modes: Manual, LFO and Attack. In Manual mode, the center point can be set to a fixed position with the frequency control. In LFO mode, the filters are continuously swept and the frequency control adjusts the speed. In Attack mode, the filters are dynamically swept according to pick attack and the frequency control acts as a range control, much like a standard envelope filter. The tremolo section has two modes, Manual and Attack. In Manual mode, the speed of the tremolo is governed by where the rate control is set. In Attack mode the speed is controlled by pick attack and the rate controls the sensitivity; the harder you pick, the faster the rate and vice-versa. The tremolo can be subtle and shimmery or full-on throbbing depending on where the depth control is set. With the depth set to zero, the Night Wire will act like a fixed filter, phase shifter or envelope-controlled filter depending on which mode the filter frequency is in. It also features a cut/boost volume control to get your levels just right.

Controls:
1. Depth: Adjusts the depth of the tremolo. More clockwise, less counterclockwise. When fully counterclockwise, the amplitude modulation will be removed and the Night Wire will function as a fixed filter, envelope controlled filter or phaser depending on where the Frequency toggle is set.

2. Rate Toggle: This toggle lets you select between two ways to control the speed of the tremolo. Attack lets you adjust the speed by pick attack. In this mode, the Rate knob controls the sensitivity of the dynamic tremolo. The higher the rate and harder you pick, the faster the speed will rise and vice versa. In Manual mode, the Rate control adjusts the speed like a common tremolo.

3. Rate: In Manual mode, this controls the speed of the tremolo. Faster speed clockwise and slower speed counterclockwise. In Attack mode, this controls the sensitivity of the dynamic tremolo. The higher the Rate and harder you pick, the faster the speed will rise and vice versa.

4. Level: Sets the output level, unity is around noon.

5. Frequency Toggle: This toggle lets you select one of 3 different ways to control the center frequency of the filter section. In LFO mode, the frequency is continuously swept by an LFO. In this mode, the Frequency knobs adjusts the speed of the LFO. In Manual mode, the frequency is determined by where the Frequency knob is set. In Attack mode, the center frequency is dynamically controlled by pick attack and the Frequency knob adjusts the sensitivity.

6. Frequency: Controls the center frequency of the filters in Manual mode: higher clockwise, lower counterclockwise. In LFO mode this controls the rate of the sweep: faster clockwise and slower counterclockwise. In Attack mode this controls the sensitivity of the envelope: lower Frequency gives slower rise and lower peak, higher Frequency gives faster rise and higher peak. Simple, right?

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 65 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$259.99 SAVE 19%
 1 in stock $211.22
Click for better price!
or call +44 20 7424 1960
quote 781691
Earth Quaker Devices Cloven Hoof V2 Fuzz Grinder Pedal Earth Quaker Devices Cloven Hoof V2 Fuzz Grinder Pedal Earth Quaker Devices Cloven Hoof V2 Fuzz Grinder Pedal Earth Quaker Devices Cloven Hoof V2 Fuzz Grinder Pedal Earth Quaker Devices Cloven Hoof V2 Fuzz Grinder Pedal Earth Quaker Devices Cloven Hoof V2 Fuzz Grinder Pedal Earth Quaker Devices Cloven Hoof V2 Fuzz Grinder Pedal
Cat: 781610 Rel: 28 Jul 20
 
Fuzz grinder pedal
Notes: The Cloven Hoof is the Hoof's evil twin. It looks a lot like the Hoof, only more, um . . . Cloven.

The tightness and clarity you loved about the Hoof has been kept, along with the wide range of fuzz sounds, and the rest was thrown away. NOS Germanium transistors? Nope! In their place, a set of four specially selected Silicon transistors were installed for cleaner cleans, higher gain, improved temperature stability, and a grittier, grindier, nastier fuzz tone with over 4x the gain of the original Hoof. The key resistors were replaced with with NOS Carbon Comp components to sprinkle a little bit of vintage flavor into the Cloven Hoof's searing fuzz fury. It's like they always say, "In with the old, out with the new".

The Tone and Shift controls remain intact, only now they're re-voiced for a smoother sweep, and more precise control over the Cloven Hoof's beefy low-end. Speaking of low-end, have you heard this thing on bass? Wow. Try the Cloven Hoof on a bass guitar. Seriously- you can still cut or boost the mids, and there's still a metric ton of output on tap, just do us a favor, and for the love of all that's Cloven, play this pedal with a bass guitar.

Controls:
1. Shift: This adjusts the mid content. Clockwise for scooped mids,
counterclockwise for boosted.

2. Tone: Bass to the left. Treble to the right

3. Level: Use this control to make the Cloven Hoof louder or quieter.

4. Fuzz: Clockwise for heavy, counterclockwise for light.

Tech Specs:

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 14 mA
Input Impedance: 150 kO
Output Impedance: <10 kO
Read more
MRP:$228.64 SAVE 22%
 1 in stock $178.55
Earth Quaker Devices Dispatch Master V3 Digital Delay & Reverb Pedal Earth Quaker Devices Dispatch Master V3 Digital Delay & Reverb Pedal Earth Quaker Devices Dispatch Master V3 Digital Delay & Reverb Pedal Earth Quaker Devices Dispatch Master V3 Digital Delay & Reverb Pedal Earth Quaker Devices Dispatch Master V3 Digital Delay & Reverb Pedal Earth Quaker Devices Dispatch Master V3 Digital Delay & Reverb Pedal
Cat: 781637 Rel: 28 Jul 20
 
Delay & reverb pdeal
Notes: The Dispatch Master is a hi-fi digital Delay & Reverb Device that combines independent delay and reverb effects into one space-saving enclosure, so you can keep deep ambient echoes (or just a quick slapback) on speed-dial.

The best-selling EarthQuaker Devices pedal just got better with new Flexi-Switchr Technology. Want to dip into ambient delay and reverb sounds for just one note? Press and hold the footswitch for as long as you use the effect, release it when you're finished, and resume your regularly scheduled dry sound. To use the Dispatch Master as a normal effects pedal, press the switch once to activate and again to bypass.

To Use Both Effects at the Same Time, Simply Adjust all Controls to Taste:

The Mix (1) control is a wet/dry blend that adjusts the overall level of the affected signal.

Time (2) sets the delay time from 0ms to 1500ms (1.5 seconds).

Reverb (3) controls the amount of reverb. Counterclockwise is less reverb, clockwise is more reverb.

Repeats (4) controls the regeneration of the delay signal. When the Repeats control is set to maximum, you'll get infinite repeats without runaway self-oscillation, which makes it great for creating drones, dialing in the ultimate post-rock guitar sound without feedback, or just having fun.

To Use the Dispatch Master as a Delay Only:

Turn the Reverb control all the way down.

Adjust the Time, Repeats, and Mix controls to taste:

To Use the Dispatch Master as a Reverb Only:

Turn the Time and Repeats controls all the way down

Adjust the Reverb and Mix controls to taste

THIS IS IMPORTANT! In Reverb-only mode, the Repeats control has a secondary function. It can be used to adjust the decay, depth, and tonal quality of the reverb! Turn it up for more dynamics and a thicker tone.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 78 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$259.99 SAVE 18%
 1 in stock $212.31
Click for better price!
or call +44 20 7424 1960
quote 781637
Old Blood Noise Reflector V3 Noisemaker Chorus Pedal
Cat: 782160 Rel: 31 Jul 20
 
Chorus pedal
Notes: An update on the popular modulation noisemaker pedal. Reflector V3 is a densely lush chorus coupled with three modes of modulation. This is a chorus with a bent, an ephemeral voice floating between aural dimensions.

Controls include Rate and Depth for the Chorus/Flanger/Vibrato speed, Mix for a balance between unaffected and affected signal and Modulate to add Pitch selection, Reverb wash amount or Flanger depth, depending on the mode. A three-way toggle switch allows the player to choose between Wrinkle Mode (A Vibrato-esque warble chorus with the added option of pitch selection, meaning the Modulate knob goes from one octave down to one octave up, with noon being close to pitch unity), Washed Mode (a simple lush chorus, Modulate control adds in a wash of Reverb pre Chorus effect) or Mirrors Mode (Detuned Chorus meets Flanger in which the Modulate knob controls the depth of the Flanger, while Rate corresponds to both the Flanger speed and the detuned Chorus speed).

The Reflector V3 features an expression out jack and clickless switching. The output level can be tweaked via an internal trimpot for boost, slight drop, or unity gain.

9VDC - 2.1mm negative center pin adapter.
60 mA draw.
Read more
MRP:$246.93 SAVE 16%
 1 in stock $206.86
Click for better price!
or call +44 20 7424 1960
quote 782160
KMA Audio Machines Moai Maea Analog Octaver Pedal
Cat: 782235 Rel: 31 Jul 20
 
Octaver pedal
Notes: Moai Maea is KMA Audio Machines' answer to long forgotten analog octaver tones. The pedal generates one higher octave and up to two sub-octaves, helping you generate a huge wall of sound by playing just one note.

The higher octave has an edgy and fuzzy character which is reminiscent of old late '60s early '70s octave-up tones, as used by legends like Hendrix or The Stooges. The sub-octaves turn your guitar into a filthy bass guitar with ground shaking lows. Choose between either the first (-I), the second (-II) or both together (-I/-II), which gives you the sought-after wall of sound.

The Moai Maea also gives you the possibility to create an individual mix of each generated octave and the original signal. To expand your soundscapes, the pedal features a serial buffered FX-Loop, within the clean path, plus a phase inverter to avoid phase-cancelation when mixing signals this way. Each octave section is foot-switchable. You can turn on and off the higher octave by jumping on the SHRIEK switch and the sub-octave by the DRONE switch.

So if you are looking for a pedal to you that extra edge for your guitar sound, Moai Maea might well be the nirvana you've been looking for.

Powered by an optional standard 9V-18V DC PSU (negative center, 2.1mm, approx. 20mA current draw)

The Moai Maea is an analog octaver and works monophonic only, not polyphonic! That means for a clean and perfect tracking, you have to play single notes because of the analog circuit design. Keep in mind that chords will sound glitchy, but charming anyway.

Every pedal is designed, assembled, silkscreened, tested and numbered by hand in our small workshop. External manufactured PCBs to guarantee our high quality standard and keep the price of our pedals reasonable. The use of an indestructible powdercoated die-cast enclosure ensures a maximum durability.
Read more
MRP:$246.93 SAVE 25%
 1 in stock $186.18
KMA Audio Machines Belfry Buffer Quality Buffer Pedal KMA Audio Machines Belfry Buffer Quality Buffer Pedal KMA Audio Machines Belfry Buffer Quality Buffer Pedal
Cat: 782212 Rel: 31 Jul 20
 
Buffer pedal
Notes: There once was a time where all the streets were grey and dark, filled with dust, dirt and lifeless existence. Humankind was lost and slowly losing its belief in the beauty of the world. Until one day, something began to tower above the smoke-filled chimneys. Something with a serene and clear clang that steered the people out of the darkness and towards the enlightenment they had craved. Open your ears and hear the sweet chime coming from the graceful Belfry Buffer.

The Belfry Buffer is KMA Audio Machines' take on a high-fidelity studio-quality buffer that'll keep your signal safe from the tone-sucking constraints of long cable-runs and epic pedalboards the size of a small spaceship. This leaves your instrument sounding as crisp, clear and natural as if it was going straight into an amp and nothing else.

Belfry sports a unique multi-path design with two buffers running in parallel in order to greatly reduce noise (123dB signal-to-noise ratio and a mind-bogglingly low Total Harmonic Distortion rating of 0,0007%) and to push the output stage for a supremely free-flowing signal.

The Belfry's high 1Meg input impedance ensures that even pedals with a high output impedance can be used before it without any issues, while the low 200Ohm output impedance will guarantee a full frequency spectrum, independent from what's coming after the Belfry.

Hence you won't experience any tone colouration such as the dreaded over-pronounced and shrill highs, which can be typical for many lower quality buffers. With the Belfry, you will simply sound like you again. Nothing less, nothing more.

Powered by a standard 9V DC power supply, the Belfry internally converts this to 18V for massively increased headroom. This helps you preserve your precious core signal and consequently tone, including all the sparkling highs and that nice round and punchy low-end.

In addition, Belfry sports a super-small housing in order for it to fit on or even under your pedalboard without any problems.

So, plug in to the Belfry Buffer and hear your tone ring out as clear as a bell again.

Studio-Quality Dual Buffer - Perfectly restores your tone with zero colouration
Supremely low Total Harmonic Distortion of 0,0007%
Signal-to-noise ratio of 123dB
Extremely small footprint - Will fit on or under any pedalboard
True-Bypass switching
Powered by opt. 9V PSU
(9V DC, centre -, 2.1mm, ~10mA current draw)
Read more
MRP:$116.28 SAVE 18%
 1 in stock $95.75
Click for better price!
or call +44 20 7424 1960
quote 782212
KMA Audio Machines Dead Stag Fuzz/Distortion Pedal
Cat: 782215 Rel: 31 Jul 20
 
Distortion pedal
Notes: Deep black mud is covering his jaws, but the rising sun reveals the glancing brake draped antlers of a majestic dead stag. His massive blast of distortion will tear down even the thickest boondock wilderness and set the world on fire.

The Dead Stag is based on one of the most classic discrete fuzz/distortion circuits in pedal history. This design has been built into countless versions by many pedal builders along the last forty odd years, however KMA wanted to take the evolution further than ever before and give you a Big Muff style pedal, but one with many more tonal options and smart features to make as versatile a fuzz/distortion pedal as possible.

Beneath the active Bass/Treble EQ with a 15db cut/boost, KMA designed a parametric mid EQ with a 12db cut/boost between 400Hz and 2.4kHz. Apart from the internal Q Bandwidth control, every EQ control is on top of the pedal which gives you a ton of tonal options.

From a thick low-end rumble or spitty mid-range, to scooped mids or a low mid hump, everything is possible. The MUD control sets up the grade of distortion, while GROWL controls the overall volume.

In addition, you can choose between two gain levels with the high/low switch and give your high mids a boost at the end of the circuit by the smooth/sharp switch.
Read more
 1 in stock $169.73
KMA Audio Machines Minos Germanium Fuzz Pedal
Cat: 782232 Rel: 31 Jul 20
 
Fuzz pedal
Notes: Conqueror of old lands and cursed with the unholy horned bastard son, King Minos has returned, filled with anger to deliver those ancient tones of fuzz-history!

The Minos is KMA Audio Machines' modern approach to the old-fashioned and beloved three- stage germanium fuzz sound, derived from and inspired by the legendary Tonebender MKII and the unique, but now hard-to-find Superfuzz pedals. However, much more than just mere recreations of these classics, Minos is a versatile tool for many different styles of fuzz sounds and music.

With the INPUT control, you can dial in the perfect amount of pre-gain and bass input. Turn it to the left and it gives you a gritty and crisp overdriven tone, which is perfect for garage and blues, while turning it in the other direction gives you a thick and woolly fuzz.

KMA's attempt of the 'Tonebender-ish' style of pedal has a much broader range of gain structures though. Sweep through any shades of dirty tone, from raunchy low gain distortion to thick angry fuzz.

Every combination of amp and instrument behaves differently, so to help tailor the pedal to your own rig, KMA added some additional tone-shaping controls. Tailor the bass response at the output with the three-way switch. This allows you to choose between lo-fi jangle, punchy low mid or a deep and boomy fuzz that will tear down everything! If it is all too shrill though, you can modify the high-end with the tone-cut, which tames the brightness on full gain.

The overall character of the fuzz can be changed with two internal trim-pots which set the bias of the second and third transistor. Change that bias at your own risk though, as it may unleash the wrath of the Minotaur!

Read more
MRP:$228.64 SAVE 20%
 1 in stock $183.99
Click for better price!
or call +44 20 7424 1960
quote 782232
Old Blood Noise Flat Light Flanger Pedal
Cat: 782134 Rel: 31 Jul 20
 
Flanger pedal
Notes: The Flat Light is a flanger aiming to be something else. It explores choral pitch shifted flanging, from octave down to a shimmering octave up and all the odd nooks and double-tones in between. Cascading lines form a lush modulation that becomes metallic and resonant as you push it. Reverb-like delays turn a stereotypical jet plane flange into more of an exploratory space mission. Push the controls and sense the terrain, yet trust your intuition maybe not with your life, but with your sound.
Read more
MRP:$246.93 SAVE 16%
 1 in stock $207.67
Click for better price!
or call +44 20 7424 1960
quote 782134
Old Blood Noise Buffer Pedal With Switchable 3-band EQ
Cat: 782181 Rel: 31 Jul 20
 
Buffer pedal
Notes: An always on Buffer and switchable 3 Band EQ. The buffer is helpful for long cable setups or when using an overabundance of pedals. The EQ is helpful in tailoring frequencies to specific parts, guitar switches or using it as an always on EQ.

The Buffer is always on. The On/Off switch only activates/deactivates the 3 Band EQ.

Controls :

Low: Slide up to boost and down to cut a 100 Hz Shelf

Mid:Slide up to boost and down to cut a 500 Hz Bell

High: Slide up to boost and down to cut a 2 KHz Shelf

9VDC, 9 mA
Read more
MRP:$124.12 SAVE 10%
 1 in stock $111.86
Click for better price!
or call +44 20 7424 1960
quote 782181
KMA Audio Machines Logan Overdrive Pedal With Switchable Mid Boost
Cat: 782231 Rel: 31 Jul 20
 
Overdrive pedal
Notes: Logan is made to transcend the well-known boundaries of overdrive. It doesn't matter if a musician is looking for a pre-amp, a low/mid-gain drive or a screaming resonant cocked-wah sound, Logan will deliver the goods and more! Combined with KMA's active 3-Band EQ, including a fully parametric Mid-EQ with a separate On/Off-Footswitch, Pre or Post Gain position-switch and an expression-in for hands-free filter sweeps, Logan is sure to provide great tones and outstanding flexibility.

Logan's gain structure is carefully balanced for an open and super touch-responsive drive tone, giving you and your instrument ample room to be expressive. You could describe its sound as smooth and harmonically rich, but that would be selling it short. There's a true fire raging under the embers here, one that allows you add more hair, grit and sizzling depth as you pile on the gain, making Logan fit for anything from clean boost, amp-like breakup, indie clang to full-on rock machine.

It also sports an impressively high-headroom-design (up to 25 dB), enabling you to use Logan as a very versatile pre-amp too - all of you amp-less/cab-sim players can thank us later.

But what truly pushes Logan over the edge is its 3-band active EQ. The Bass and Treble EQ knobs are able to both boost or cut your signal by around 15 dB. This enables you to beef up thin-sounding single coils, add some chime to chunky humbuckers or get rid of boomy bass frequencies, when changing from a sweet 2x12 to a fat 4x12 cabinet. In addition, the tonal flexibility is even further extended by Logan's fully parametric Mid-EQ section, where the MID control lets you set your preferred mid frequency between 100 Hz to 2.5 kHz, while the CUT/BOOST control lets you cut or boost the selected frequency by up to 12 dB.

But the frequency fest doesn't stop there. Logan even sports a dedicated footswitch to activate or deactivate the Mid-EQ and a position-switch which lets you place it either before the main gain-stage (PRE) or after it (POST), opening up a whole world of tonal possibilities. Place the Mid-EQ post-gain to give yourself a level boost for solos or place it pre-gain to saturate your preferred frequency even more, effectively giving you a second gain-stage.

Then there's the kicker! You can take complete hands-free control of the Mid-EQ Frequency via a regular expression-pedal. This lets you make instant tone changes on the fly, as well as unleash everything from fast and quacky wah-like sounds to slow and enveloping phasery filter sweeps.

You'd think the feature-well would have run dry by now, but no, there's even more cool sonic secrets under the hood.

The pedal has been set at the factory to sound stellar right out of the box, however some people might want to tweak some more options to taste. Via a hole in the base plate, you get direct access to an internal trim-pot to set the bandwidth (Q) of the Mid-EQ. Turn it counter-clockwise for a broad bandwidth, for smooth frequency sweeps or turn it completely clockwise for really resonant sounds. Removing the base plate will reveal a second trim-pot, which enables you to blend in your clean signal with the overdriven tone, making Logan transcend the world of guitar. Bass? Drums? Synths? Vocals? Bring it on! This pedal will handle it all.

Logan really is an all-in-one overdrive solution and trust us, once you plug in you'll never want to turn it off again!

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, approx. 30mA current draw)
Read more
MRP:$215.57 SAVE 20%
 1 in stock $173.11
Click for better price!
or call +44 20 7424 1960
quote 782231
KMA Audio Machines Queequeg Sub Octave Generator Pedal
Cat: 782237 Rel: 31 Jul 20
 
Octave generator pedal
Notes: Guided by an immortal spirit and encouraged by the old seer's prophecy to plunge into the abyssal sea fulfilling his destiny. He is holding his weapon with ease willing to tame the tremendous beast and showing you the beauty of the deepest sounds. Queequeg - just one man to pave the way for your intense suboctave experience!

Queequeq is KMA Audio Machine's take on a simple, yet massive analog monophonic suboctave generating device. Our aim was to provide a super easy to use and ultra-fast tracking suboctaver in a small footprint that works equally well on guitar, bass and synth, so these classic earth-shakingly awesome tones can find their way to any setup out there.

With its one knob SUB control, you are able to dial in the right blend of the generated suboctave and your clean signal. Queequeq's quick tracking benefits from the all-analog circuit design, giving you a very organic and smooth suboctave sound.

Thickening up your tone slightly, blasting out faux bass-synth resonances or even filling in for a missing bass sound are just some of Queequeg's specialties. The SUB control goes from completely clean on the left, to 100% suboctave action on the right side and with different sonic blends in between.
Your search for an easy to set and great-sounding all analog sub octaver ends right here with the Queequeg.

Powered by an optional standard 9V-18V DC PSU (negative center, 2.1mm, approx. 10mA current draw)
Read more
MRP:$168.54 SAVE 16%
 1 in stock $141.53
Click for better price!
or call +44 20 7424 1960
quote 782237
KMA Audio Machines Wurm Metal Distortion Pedal
Cat: 782248 Rel: 31 Jul 20
 
Distortion pedal
Notes: This dark legend has been told for thousands of years. An old creature, full of grief and malice, it will bring destruction and terror over tracts of the land. Feel the fear and the destructive energy of that ancient monster, with the WURM.

KMA Audio Machines brings you the legendary distortion sound from the out of production Boss HM2 MIJ pedal. Its sound was a key element of the Swedish chainsaw metal, invented by Bands like Dismember and Entombed.

Taking the essential ingredients of this classic, while in the process developing a way more flexible metal-distortion pedal, KMA kept the classic active EQ section and added two more bands, giving a much wider range of tones to tailor your evil and gritty distortion sound. Each band has an internal trim-pot to change the centre frequency and fine-tune your tone.

To switch between the original HM2 high control and the KMA Audio Machines designed EQ bands, KMA added internal DIP switches for even more tonal variations.

Activating Switch 1 alone selects the WURM high-mids mode. To get the classic HM2 'chainsaw' high-mids character however, put switch 1 in the off position and switch 2 to on, crank the LOWS and the HIGH MIDS and rip that Swedish forest to shreds.

Activating both switch 1 and 2 together though gives you three bands, which are controllable via the HIGH MIDS control. TERROR dials in the malice and the evil distortion sound you are searching for! Crank it up and you will feel the rage of the ancient WURM.
Read more
MRP:$254.77 SAVE 18%
 1 in stock $209.85
Click for better price!
or call +44 20 7424 1960
quote 782248
KMA Audio Machines Strokkur Treble Booster Pedal
Cat: 782243 Rel: 31 Jul 20
 
Treble booster pedal
Notes: Iceland, a place full of myths, miracles and fairy tales. Mighty forces are hidden underneath the barren valley of Haukadalur. A geyser so graceful, that sees you stand still in awe of the pure power of nature. Its name is Strokkur, the namesake of KMA Audio Machines' Germanium Treble-to-full-range Booster.

Strokkur is KMA Audio Machines' inspired take on the iconic Dallas Arbiter Rangemaster. Well known for its power and exploding harmonics when pushing a tube amp on the edge of breakup, this pedal has helped shape and define legendary guitar tones throughout the ages. Now with Strokkur's updated and refined feature-set, these tones are ready to rock and inspire a new generation of players.

Strokkur is equipped with hand-selected NOS AC125 Tungsram transistors in order to stay true to the power and tone of the original, all while standing out from other germanium treble boosters on the market with its additional RANGE control and its two-band EQ-Section. This allows players to perfectly sculpt their own boosted tone, so it'll suit any amp, any instrument and any style!

With its RANGE control, you can dial in anything between the classic treble booster sound to a full range boost, giving you a meaty sound with tight low-mids. The BOOST control, although not in need of much explanation, is very powerful. Set it low and simply use Strokkur as a subtle tone shaper, or begin cranking it and hear your tone shoot and soar into Rock 'N Roll heaven with its mighty 17dB of boost on tap.

KMA added a passive TREBLE and BASS control to fine-tune your sound. TREBLE tames the high frequencies and the transients (>2.4kHz) when the boost is fully cranked, which helps you to quickly find the sonic sweet spot in combination with your amp. BASS helps to prevent overloading the amp by cutting lower frequencies (<240Hz), but leaves the low- mids untouched. Works especially well with humbucker guitars.

Unlike most germanium boosters on the market, Strokkur is fitted with an internal DC converter and hence works with every regular 9V DC supply without fuss. So, plug in your guitar and feel the force of nature!

Read more
MRP:$220.80 SAVE 29%
 1 in stock $156.19
KMA Audio Machines Tyler Two Channel Signal Splitter Pedal
Cat: 782246 Rel: 31 Jul 20
 
Signal splitter pedal
Notes: Can you hear the sounds coming from the woods? The steely strikes of an axe are echoing clearly through the forest, alongside the separated heavy thuds of chopped trees falling. It's Tyler - a man, rough and towering, wielding his steely axe with only one aim: Splitting up your sound!

KMA Audio Machines bring you Tyler - The Frequency Splitter. The ultimate tool for developing new sounds and pushing your creativity to new unprecedented heights.

Tyler is an active and variable two channel crossover/signal splitter, which divides your signal with HIGH PASS and LOW PASS paths. Both filters have a 12db/Oct. roll-off with a variable cut-off frequency from 20Hz to 3kHz.

Each channel has its own foot-switchable buffered FX-Loop to process your lows (WOOD) or your highs (STEEL) with independent effects loops in parallel. The MIX knob controls the ratio of the Low Pass and High Pass signals. The range goes from 100% LP over to a 50/50 ratio until 100% HP when set fully clockwise. The mix control has a flat response, with equally chosen cut-off frequencies for the LP and HP to avoid notches or bumps. If required, the LEVEL control can boost your mixed signal up to 14dB.

To avoid any phase-cancellation issues when external pedals are inserted, KMA also added a phase inverter and internal trim pots to better control the impedance for not only the main input, but also for each effects-loop. This is pretty handy when you want to insert your favourite fuzz pedal and get the tone just right.

Some examples of use: Bass players want to retain their low end while using their favourite fuzz or dirt pedal. Insert your dirt box in the highpass FX-Loop and adjust the cut-off frequency of the High and Low Pass to your needs. Dial in your preferred ratio of those Low and High Pass signals, engage the STEEL footswitch and you will never turn off TYLER again! You can also insert different modulation pedals, for example insert a lush phaser for the lows and a nice shimmering delay for the highs and TYLER will make it sound like two different guitars are playing at once. Mix up your modulation pedals with any dirt pedals, for a very pronounced and punchy sound all coming from one amp.

As you can see, TYLER is like a Swiss army knife for your tone, being both a sonic tool and a supreme source of creativity - so take your axe and let the magic happen.

Read more
MRP:$259.99 SAVE 14%
 1 in stock $223.14
Click for better price!
or call +44 20 7424 1960
quote 782246
KMA Audio Machines Fuzzly Bear Silicium Fuzz Pedal
Cat: 782224 Rel: 31 Jul 20
 
Fuzz pedal
Notes: Holy Spirit of the forest, the Fuzzly Bear fuzz pedal is here, so kick the Switch to unleash the beast!

The sound of this fuzz-pedal is influenced by an old rare and underrated fuzz box from the 1970s, the classic Jordan Boss Tone. The main reason though why this pedal did not conquer the world of effects back in the day, was due to its massive lack of bass. However, the fuzz could be heavenly and ranged from a snake's hiss, to a kitten's purr or it could just be downright nasty and trebly. When you found the sweet spot though, it had such a rich voice and all in a day when most fuzz boxes prided themselves on being overwhelmingly grainy or just downright harsh.

KMA refined the circuit to get the essence of that old-school sound, but with a modern twist. First of all, they brought back the low end and added a bias control to explore lots of new capabilities of this long forgotten pedal.

The essential SKIN/MEAT knob controls the bias of the circuit. You can dial in a sharp skinny fuzzy drive tone or a thick and meaty wall of furry. The GAIN control delivers a whole range of different fuzz shapes.

Back it off to get a dirty chunky overdriven tone, turn it up and your tone becomes thicker and thicker. Set the gain fully clockwise and magic will happen: The smooth decay turns into a starved and gated fuzz sound, perfect for classic tunes.

Powered by an optional standard 9V-18V DC PSU (negative center, 2.1mm, approx. 2mA current draw)

Every pedal is designed, assembled, silkscreened, tested and numbered by hand in our small workshop. Doublesided PCBs designed, tested and assembled by KMA were used, to guarantee a high quality standard and keep the price of the pedals reasonable. The use of an indestructible powdercoated die-cast enclosure ensures maximum durability.



Read more
MRP:$202.51 SAVE 27%
 1 in stock $148.42
Electro Harmonix Oceans 11 Reverb Pedal
Cat: 691705 Rel: 25 Jun 18
 
Compact, affordable pedal packed with advanced functionality & eleven reverb styles
Notes: With 11 reverb types and a ton of "hidden" functionality, the Electro-Harmonix Oceans 11 reverb pedal could be your new go-to reverb pedal. You can tap into classic tones like hall, plate, and spring reverbs, including a brand-new spring reverb algorithm that sounds gloriously complex and rich - you can even double-tap the footswitch to "crash" the spring reverb. And you'll be able to cover a huge range of modern tones with a variety of modulated reverbs, shimmer reverb, reverse reverb, and more. A mode switch offers access to variations on many of the 11 reverb types. Complete with an infinite reverb mode for freeze-style effects, there is vast creative potential in the Electro-Harmonix Oceans 11 reverb pedal.

Reverb types:

Hall - rich and full sound of a grand concert hall
Spring - brand-new tube spring reverb emulation
Plate - lush and warm plate reverb
Reverse - each note fades in backwards
Echo - recirculates echoes through the plate reverb algorithm
Trem - hall reverb plus tremolo
Mod - modulated reverb
Dyna - swells, gates, and ducks in response to your playing dynamics
Auto-Inf - auto-infinite reverb, triggers a wash of reverb with each new note or strum
Shim - shimmer reverb with an octave-shifted wash that blooms behind your core tone
Poly - polyphonic reverb with two pitch shifts operating on your pre-reverb guitar tone
Read more
MRP:$184.22 SAVE 17%
 More than 10 in stock $153.51
Click for better price!
or call +44 20 7424 1960
quote 691705
Electro Harmonix Bass Mono Synth Effects Pedal
Cat: 718362 Rel: 18 Feb 19
 
Bass synthesizer effects pedal with 11 monophonic synth sounds
Notes: The EHX Bass Mono Synth transforms your bass into eleven great sounding synthesizers... from vintage synth emulations to thick, stacked voices to deep pulsing sounds and more.

Its intuitive layout makes it easy to use and easy to dial in good sounds quickly. DRY controls the volume of your dry bass signal at the Synth Output. SYNTH controls the volume of the Synthesizer sound at the Synth Output. Used together they let you create just the right mix. The SENS control, short for sensitivity, adjusts how your playing dynamics trigger the synthesizer and allows you to fine tune the way the pedal responds to your bass rig and playing style.

With the CTRL knob you can adjust a key parameter for each of the eleven synth types. It varies depending on the preset and provides more tweakability for customizing your sound. There’s also an EXP input which lets you control an entirely different parameter in real-time with an expression pedal!

Using the built-in Preset footswitch, a user customizable preset for each of the eleven synth sounds can be created, saved and recalled. The factory presets are also easy to restore should you wish to.

From lush, warm sounds to sharp, percussive stabs, the Bass Mono Synth puts a collection of cool bass synths at your fingertips.
Read more
MRP:$152.86 SAVE 17%
 4 in stock $127.38
Click for better price!
or call +44 20 7424 1960
quote 718362
Mooer Ocean Machine Delay Reverb & Looper Pedal Mooer Ocean Machine Delay Reverb & Looper Pedal Mooer Ocean Machine Delay Reverb & Looper Pedal Mooer Ocean Machine Delay Reverb & Looper Pedal
Cat: 666629 Rel: 18 Oct 17
 
High-fidelity delay, reverb & looper unit
Notes: Designed and developed over two years, in collaboration with Devin Townsend, the Ocean Machine is a high fidelity professional Delay, Reverb and Looper unit which brings together the best available hardware on the market and very complex algorithms to create lush, heavenly effects. MOOER has worked very closely with Devin Townsend to meet all of his own personal requirements while also ensuring that the "Ocean Machine" is versatile and enjoyable for musicians from all walks of life.

A multitude of programmability and control options makes the ocean machine ideal for all different kinds of guitarists from bedroom beginners to industry professionals and is easy to integrate into all different kind of setups. MOOER has brought all of this together into a small, stylish and highly competitive, cost efficient package.
Read more
 6 in stock $188.35
NUX Stageman Floor Analogue Acoustic Preamp DI Pedal NUX Stageman Floor Analogue Acoustic Preamp DI Pedal NUX Stageman Floor Analogue Acoustic Preamp DI Pedal NUX Stageman Floor Analogue Acoustic Preamp DI Pedal
NUX
Cat: 735364 Rel: 04 Jun 19
 
Analogue acoustic preamp with digital effects & looper function
Notes: NUX Stageman Floor is an analogue acoustic preamp with digital effects and looper function. The preamp features a highly sensitive 3-band EQ with MID scoop toggle switch, adjustable notch filter and input gain control. It is equipped with multi-functional chorus & reverb effects. High headroom gain stage with 3-band EQ, mid-scoop and switchable response for piezo or magnetic pickups. A built-in looper can make use of both pedals for freeze and overdub effects. A complete stage or studio tool for acoustic players.
Read more
MRP:$168.54 SAVE 44%
 8 in stock $94.71
Click for better price!
or call +44 20 7424 1960
quote 735364
Electro Harmonix Freeze Sound Retainer Pedal
Cat: 560329 Rel: 04 Feb 15
 
Sound retainer effects pedal with real time sample capture & perfect looping
Notes: Capture a frozen moment and turn it into a tonally unique sonic foundation. The Freeze Sound Retainer delivers infinite sustain of any note or chord at the press of a momentary footswitch. Release the footswitch and you are again sample ready.

Three selectable decay rates, including a latch mode, guarantee liquid, smooth tonal transitions.

Hook the Freeze up with your favorite pedals for a sonic collage that will be unlike anything you have ever heard.

It's like adding an extra musician to the band.

*UK230V power adapter included*
Read more
MRP:$158.09 SAVE 17%
 2 in stock $131.73
Click for better price!
or call +44 20 7424 1960
quote 560329
Electro Harmonix Pitch Fork Polyphonic Pitch Shifter Pedal
Cat: 560349 Rel: 04 Feb 15
 
Polyphonic pitch shifter effects pedal, transposes over a +/- three octave range
Notes: The Pitch Fork transposes an instrument's pitch over a +/- three octave range and features three modes which allow the pitch to be transposed up, down or both, simultaneously. The pitch shift amount can be set to a fixed interval or continuously varied by an expression pedal or control voltage.

The controls are straightforward and intuitive. An 11-position Shift switch selects the maximum transposition interval ranging from D (Detune), a shift of 17 cents, through Minor 2nd, Major 2nd, Major 3rd, Perfect 4th, Perfect 5th, Major 6th, Minor 7th, 1 Octave, 2 Octaves and 3 Octaves. A three position toggle switch controls whether the pitch is transposed up, down or both. In Dual mode, two pitch-shifted signals are output. One follows the shift knob as if in the Up position while the other creates a harmony. Dual Mode settings include M3 up + P5 up, P5 up + 1 Oct down, 1 Oct up + 1 Oct down and many others. A Blend knob controls the mix of the dry signal and the effected signal, and an EXP jack enables the player to control pitch and glissando with an expression pedal.

The Latch button selects Latch or Momentary mode which affects how the footswitch and EXP input behave. In Latch mode, the footswitch toggles between effect on and buffered bypass each time it's pressed and the EXP input continuously varies pitch. In Momentary mode the effect is only on while the footswitch is depressed and when it is released the Pitch Fork goes into bypass.

In Latch mode the EXP input controls pitch shift amount, ranging from unity to the interval set by the Shift knob, and pitch varies continuously throughout the expression pedal's range. In Momentary mode the EXP input controls glissando rate for the Pitch Fork's footswitch. When the bypass footswitch is pressed, the Pitch Fork jumps from bypass to the interval set by the Shift knob. The amount of time it takes to reach that new note is the glissando rate. When the footswitch is released the pitch will return to unity at the same rate. That glissando time can vary between 4 milliseconds to two seconds depending on the heel/toe position of the expression pedal. The default glissando rate is 60 milliseconds when nothing is plugged into the EXP input.

The Pitch Fork comes equipped with an EHX 9.6DC-200mA power supply and also runs on a 9Volt battery.

*UK 230V power adapter included*
Read more
MRP:$212.96 SAVE 17%
 7 in stock $177.46
Click for better price!
or call +44 20 7424 1960
quote 560349
Singular Sound Aeros Loop Studio Looper Pedal Singular Sound Aeros Loop Studio Looper Pedal Singular Sound Aeros Loop Studio Looper Pedal Singular Sound Aeros Loop Studio Looper Pedal Singular Sound Aeros Loop Studio Looper Pedal
Cat: 782690 Rel: 15 Jul 20
 
Studio looper pedal
Notes: Easily one of the best looper pedals on the market. Huge power from this six-track effect, allowing you to perform in new and creative ways. Great clear sound and user-friendly design.

Supplier notes:
6 Track, Stereo Looper Pedal with Touch Enabled Screen, Hands Free Mixing, and Simultaneous Parallel and Sequential Looping

The Aeros Loop Studio includes 3 hours of mono recording time (1.5 stereo), upgradeable to 48 hours when using SD card

This pedal includes 2 x 1/4" (6.35mm) inputs, 2 x 1/4" (6.35mm) outputs, expression pedal support, MIDI in/out, 1/4" (6.35mm) stereo aux input, and 1/4" (6.35mm) stereo aux output.

Built in wifi and bluetooth for over the air updates, the Aeros Loop Studio offers a revolutionary looping experience

Featuring the ability to create 36 unique loops per song, the Aeros Loop Studio goes beyond what's expected of a looper pedal. Add unlimited overdubs for each loop, and record up to 48 hours (when using an SD card).

Blurring the lines between traditional loopers and audio workstations, the Aeros Loop Studio allows you to mix your tracks live during a performance using the built-in scroll wheel, and gives the ability to save and export songs. This will let you share your best loops with your fans.

With its 4.3" touch-enabled screen and color coded cues and waveforms, the Aeros looper will never leave you wondering where you are in the loop.

Additionally, the Aeros Loop Studio packs tons of power into a small form factor. Coming in at just 7.8"? x 5.6" (198 x 142 mm), the Aeros lets you add a 6 track, stereo looper to any pedalboard.

Of course, the Aeros had to be fully compatible with Singiular Sound's drummer pedal: The BeatBuddy. Using the two together is a plug and play experience.

This new looper also features bluetooth and wifi, enabling us to add exciting new features with over the air updates. Simply put, there's no other pedal that can match the Aeros Loop Studio.

SPECIFICATIONS
Quantize your tracks in any time signature or play in freeform mode.

6 parallel tracks and 6 song parts for a total of 36 distinct loops per song and in an industry first, but also, simultaneous parallel and sequential looping.

Unlimited overdubs enable you to create layers and depth in your loops without worrying about restrictions.

Save your loops with the USB port or an SD card.

3 hours mono, 1.5 hours stereo recording time (20 minutes per song) using internal storage and up to 48 hours storage when using an SD card.

32-bit floating point processing, 24-bit recording, professional DACs, <1ms latency, and 20hz - 20kHz range for studio quality recordings.

Digital dry through bypass.

In addition, wifi compatibility for over the air updates and exciting, yet to be announced features.

Bluetooth for reasons.

Four built-in footswitches with our comfort+ switch tops (perfect for playing barefoot or in socks).

There is a built-in scroll wheel for hands-free mixing during a performance.

MIDI in/out ports for syncing seamlessly with the BeatBuddy, other drum machines, effects, and more.

Additionally, it is compatible with any external expression pedal.

I/O: two 1/4" (6.35 mm) inputs, two 1/4" (6.35 mm) outputs, one 1/4" (6.35 mm) stereo aux input, one 1/4" (6.35 mm) stereo aux output.

9v (center negative), 360mA power supply included.

4.3" (109 mm) touch-enabled display.

Small form factor: 7.8" x 5.6" x 2.2" (198 x 142 x 56 mm).

Lightweight: 2lbs 4oz (936 g).

Aluminum construction with chip resistant black coating.

Requires Male to Male MIDI Cable for connecting to the MIDI Maestro and Male to Male MIDI Cable as well as MIDI Breakout Cable for connecting to the BeatBuddy
Read more
MRP:$952.44 SAVE 30%
! low stock $664.13
Click for better price!
or call +44 20 7424 1960
quote 782690
Electro Harmonix Small Stone Analogue Phase Shifter Pedal
Cat: 560358 Rel: 02 Feb 15
 
Analogue phase shifter effects pedal with true bypass for maximum signal path integrity
Notes: Get the sound that made the Classic 1970 Small Stone famous. Generates thick sweeping phase shifting with liquid transparency. Feedback colour control adds a tingling swirl. Blues players dig the Stone's rapid rotating speaker effect. Country players add tasty seasoning to their chicken pickin'. Metal-heads dig its jet plane swoosh.

- Nano chassis
Read more
MRP:$87.54 SAVE 17%
 2 in stock $72.94
Click for better price!
or call +44 20 7424 1960
quote 560358
Electro Harmonix Switchblade Plus Advanced Channel Selector Pedal
Cat: 560376 Rel: 31 Jan 15
 
Advanced channel selector pedal for switching between 2 different output paths
Notes: The Switchblade+ offers a convenient solution to a player’s switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick.
Read more
MRP:$60.10 SAVE 17%
 1 in stock $50.08
Click for better price!
or call +44 20 7424 1960
quote 560376
Electro Harmonix Big Muff Pi With Tone Wicker Distortion Sustainer Pedal
Cat: 560380 Rel: 04 Feb 15
 
Distortion/sustainer effects pedal with true bypass for maximum signal path integrity
Notes: The Big Muff Pi with Tone Wicker taps into the sonic power of the legendary Big Muff Pi, but creates new tonal possibilities at the flick of a switch -- or two. Use the Wicker switch to open up three high-frequency filters for raspy, sustaining distortion with top-end bite, or flick on the Tone switch to bypass the tone control for unabated tonal slam.

Want the original Big Muff sound? Just switch off the Wicker and turn on the Tone. The ability to create your own personal Big Muff sound is what truly makes this the Wicked Wicker.
Read more
MRP:$112.36 SAVE 17%
 2 in stock $93.64
Click for better price!
or call +44 20 7424 1960
quote 560380
Electro Harmonix Silencer Noise Gate Effects Loop Pedal
Cat: 581756 Rel: 14 Sep 15
 
Noise gate/effects loop pedal with 3 controls for precise fine-tuning & buffered bypass
Notes: A sophisticated noise gate that can tame a single pedal or an entire effects loop! The Silencer's three-control layout provides precise fine-tuning to fit your system, axe and playing style. Threshold adjusts how much level is required to open the noise gate and allow a signal to pass thru. Reduction regulated the degree to which the gated signal is reduced and is variable between -70dB and +4dB. Release controls how long the gate remains open after the signal drops below the Threshold. Release time is variable between 8ms and 4 seconds.

I/O includes 1/4" Input, Output, Send and Return jacks. The footswitch selects whether The Silencer is engaged or in bypass mode; buffered bypass allows the effects loop to remain in your signal path when the gate is bypassed. A built-in AC jack accepts a standard power supply like the EHX 9.6DC unit (optional) and the pedal comes with a 9V battery.

Conquer noise with The Silencer!
Read more
MRP:$84.92 SAVE 17%
 2 in stock $70.77
Click for better price!
or call +44 20 7424 1960
quote 581756
Electro Harmonix Superego+ Synth Engine & Multi Effect Pedal
Cat: 664142 Rel: 26 Sep 17
 
Synth engine guitar effects pedal with 3 operation modes
Notes: Building on the synthesis platform of the award-winning Superego, our new Superego+ raises the bar when it comes to creating synth effects, sound layers, glissandos, infinite sustain and more. Plus, we've added a complete effects section featuring 11 effects types, an EXP input for effect parameter control and an EXT jack for a 3-button controller.

The Superego+ is equipped with the following effects:

- DETUNE: pitch detune, EXP pedal controls pitch
- DELAY: warm, analog sounding delay, feedback is preset, EXP controls delay time up to 2 seconds
- ECHO: pristine digital delay, feedback is preset, EXP pedal controls delay time up to 2 seconds
- FLANGE: Electric Mistress style w/filter matrix, rate and feedback. EXP pedal controls rate
- PHASE: Small Stone style phase shifting with rate and depth control. EXP controls rate
- MOD: pitch-based vibrato or chorus. EXP controls rate
- ROTARY: rotary speaker style sound. Depth controls tweeter/horn balance. EXP pedal controls rate
- TREM 1: sine wave tremolo. EXP controls rate
- TREM 2: square wave tremolo. EXP controls rate
- PITCH: pitch shifting effect over a +/- one octave range. EXP controls whammy
- FILTER: resonant low-pass filter. EXP pedal controls frequency

The pedal provides enough sound shaping control to please the most sonically adventurous player and is equipped with Dry, Effect, Attack, Decay, Threshold, Layer and Gliss knobs, plus Rate and Depth knobs for the Effects Section. Four foot-switchable Freeze modes: Moment, Sustain, Auto and Latch, plus a Live Effects mode where the dry signal is routed thru the built-in effects and the internal synth engine is disabled, are included.

The polyphonic Superego+ works with guitar as well as other instruments including bass, keyboards, vocals, drums, etc. and comes equipped with an EHX 9.6DC-200 AC Adaptor.
Read more
MRP:$303.11 SAVE 17%
 2 in stock $252.59
Click for better price!
or call +44 20 7424 1960
quote 664142
Electro Harmonix Attack Decay Tape Reverse Simulator Pedal Electro Harmonix Attack Decay Tape Reverse Simulator Pedal Electro Harmonix Attack Decay Tape Reverse Simulator Pedal Electro Harmonix Attack Decay Tape Reverse Simulator Pedal
Cat: 719369 Rel: 06 Jun 19
 
Volume envelope manipulation with adjustable Decay & Attack times
Notes: The circa-1980 Electro-Harmonix Attack Decay is a sought after prize among vintage pedal aficionados. Originally called a Tape Reverse Simulator, it’s known for producing volume and reverse swells, backward tape sounds, artificially short staccato notes and bowed instrument effects. The new Attack Decay reinterprets the classic and keeps its cool factor, but adds some modern features for convenience and enhanced functionality.

It can produce a single volume envelope like the original, or, with Poly engaged, put separate volume envelopes on each note you play. The built-in Harmonix fuzz is now a fully controllable distortion with gain, tone and volume controls. The effects loop allows the musician or sound designer to place the volume envelope onto whatever signal is present at the Return jack. Expression pedal/CV input and three user presets give the user total control over their Attack Decay!
Read more
MRP:$158.09 SAVE 17%
 2 in stock $131.73
Click for better price!
or call +44 20 7424 1960
quote 719369
Mooer Audiofile Headphone Amplifier Pedal Mooer Audiofile Headphone Amplifier Pedal Mooer Audiofile Headphone Amplifier Pedal
Mooer Audiofile Headphone Amplifier Pedal (headphone amplifier pedal)
Cat: 677257 Rel: 12 Feb 18
 
Headphone amplifier for pedalboards
Notes: AUDIOFILE is an all analog, hi-fi quality, pedalboard headphone amplifier. This class A amplifier circuit will bring a smile to the faces of even the most disconcerting of audio addicts. Hook up AUDIOFILE as the last unit in your signal chain and leave it there as a permanent resident on your board.

Connect your headphones and activate the analog cab sim for totally immersive practice sessions.

When playing live the AUDIOFILE can be completely bypassed or used as an excellent "always-on" signal buffer/booster with the cab sim turned off.

Purity, warmth, dynamics and retention of tone are the name of the game with AUDIOFILE.
Read more
 2 in stock $66.41
Click for better price!
or call +44 20 7424 1960
quote 677257
Mooer GE150 Amp Modelling & Multi Effects Pedal Mooer GE150 Amp Modelling & Multi Effects Pedal Mooer GE150 Amp Modelling & Multi Effects Pedal Mooer GE150 Amp Modelling & Multi Effects Pedal
Cat: 748617 Rel: 01 Nov 19
 
Multi-effects processor featuring 55 high quality amp models
Notes: The MOOER GE150 is the newest entry in the GE line of multi-effects pedals from MOOER. The GE150 comes packed with 55 high-quality amp models and 151 different effects, a straight forward and intuitive UI, topped off with a fully-functioning expression pedal. With OTG capabilities, users can record directly into a compatible device from anywhere!

Read more
 3 in stock $141.53
Mooer Micro Preamp 05 Brown Sound 3 Pedal Mooer Micro Preamp 05 Brown Sound 3 Pedal Mooer Micro Preamp 05 Brown Sound 3 Pedal
Cat: 666642 Rel: 20 Oct 17
 
High quality dual channel preamp with independent 3 band EQ, Gain & Volume controls for each channel
Notes: MOOER micro preamps are sonically accurate digital recreations of the preamp sections of popular tube amplifiers. These have been developed by directly analysing real tube amplifiers using a brand new technology to capture their sound, dynamics and response. Each Micro Preamp comes complete with dual channels, integrated speaker cabinet simulation and dual operating modes to suit the needs of all users.

Initially released in a set of 10 models - each based on a different popular tube amplifier from a range of manufacturers - they have been designed to be used with the upcoming MOOER power amp or in the effects return of any standard guitar amplifier. The speaker cab simulation allows the user to connect direct to a soundcard, powered monitor or P.A. without the need for a guitar amp or speaker cab at all.

The Mooer Micro Preamp 005 overdrive is an affordable, simple way to upgrade your guitar sound. It's a compact effects pedal based on an amplifier made famous in the eighties by a legendary Dutch guitarist.
Read more
! low stock $79.47
Click for better price!
or call +44 20 7424 1960
quote 666642
WMD Geiger Counter Distortion Pedal WMD Geiger Counter Distortion Pedal
Cat: 698452 Rel: 21 Aug 18
 
Digital distortion pedal with high gain modern preamp
Notes: The WMD Geiger Counter is hundreds of entirely new face melting sounds. A high gain modern preamp drives an 8 bit computer, creating sounds which range from nice (tubey overdrive, lofi aliasing, hot gated leads) to total madness (impossible amounts of gain, multiple octave foldover, harsh digital data errors, and piercing sculpted noise).

- High Gain Modern Preamp
- Dramatic Tone Control with Disable
- Sample Rate from 260Hz to 58kHz
- 1 to 8 Bit Depth with Mask mode
- 252 Wave Table Modulator
- CV In for Expressive Control
- Always saves settings
- Hand Wired True Bypass
- Top Quality Components
- Super Hard Epoxy Powder Finish
- Standard 9V Power Jack
- 4.5" x 3.5" Small Footprint
Read more
MRP:$365.82 SAVE 23%
 1 in stock $280.88
Click for better price!
or call +44 20 7424 1960
quote 698452
NUX NRV2 Oceanic Digital Reverb Pedal NUX NRV2 Oceanic Digital Reverb Pedal NUX NRV2 Oceanic Digital Reverb Pedal
NUX
Cat: 712773 Rel: 21 Jan 19
 
Reverb effects pedal with single rotary knob control
Notes: NUX Oceanic, a reverb effect as vast and deep as its name! Its minimalistic design sails past the competition giving you endless parameter choices with one single knob. Studio-grade hardware performance makes it an essential in your arsenal of effects. Room, Hall, and Square-wave or even Outer-space reverb. It's all there, with a simple twist of a knob. Pressing the footswitch activates a green-light indicator, transforming the DECAY knob into a wet/dry mix control. Demanding guitarists want a reverb that doesn't drown-out their tone, and Oceanic was designed with this in mind. Instead of dull and shallow you'll get a deep full-sounding reverb that's so seamless, you might even forget your jamming with it.

To make Oceanic a great digital reverb pedal, we used a powerful 32-bit DSP to process the complexity of its algorithm. To make it a unique reverb pedal, we programmed loads of studio-sound shaping parameters into that algorithm: Envelope Control, Multi-stage Cascade Diffuser, Multi-band Tone Decay Adjustment, Random Adjustment of Tail-tone Delay, and lots more! We even built in a compressor mould to help fine-tune your reverb dynamics. NUX is, once again, proud to re-define the mini pedal with Oceanic, a truly extraordinary reverb pedal. Oceanic can be switched in between true-bypass and buffer bypass.
Read more
MRP:$90.15 SAVE 52%
 1 in stock $43.55
Click for better price!
or call +44 20 7424 1960
quote 712773
NUX Mod Core Deluxe Modulation Effects Pedal NUX Mod Core Deluxe Modulation Effects Pedal NUX Mod Core Deluxe Modulation Effects Pedal
NUX
Cat: 712820 Rel: 29 Nov 18
 
Effect pedal with 8 modulation effects
Notes: Mod Core Deluxe is a fully-featured pro-quality modulation effects pedal.
Add-in Rate and Depth controls to adjust main parameters and Tweak control to manipulate key parameters for each effect, and you get more tone-shaping options than you'll ever find in a modulation pedal.
It has 8 modulation effects with 2 types of algorithms fitting every musician's needs for sound improvement and colorization.
Read more
MRP:$78.39 SAVE 33%
 2 in stock $52.25
Click for better price!
or call +44 20 7424 1960
quote 712820
NUX Time Core Deluxe Delay Pedal NUX Time Core Deluxe Delay Pedal NUX Time Core Deluxe Delay Pedal NUX Time Core Deluxe Delay Pedal NUX Time Core Deluxe Delay Pedal
NUX
Cat: 712824 Rel: 29 Nov 18
 
Stereo multi-delay effects
Notes: Time Core Deluxe, awesome, user-friendly delay sounds all wrapped up in one little box. You get a total of 7 different delay types offering a wide variety of delay effects from: 40ms Doubled Rock'n Roll delay, then all the way to 1500ms, with an absolutely mesmerizing wash for ambient echo! Each delay mode has its own characteristic sound, tweak-able to personalize your preset. Fill your lead tone for solos or experience new and interesting ways to enhance rhythm guitar performance.
Read more
MRP:$103.21 SAVE 43%
 2 in stock $58.78
Click for better price!
or call +44 20 7424 1960
quote 712824
NUX NSS3 Mini Studio Pedal NUX NSS3 Mini Studio Pedal NUX NSS3 Mini Studio Pedal NUX NSS3 Mini Studio Pedal NUX NSS3 Mini Studio Pedal NUX NSS3 Mini Studio Pedal
NUX
Cat: 747756 Rel: 21 Oct 19
 
Mini studio speaker cabinet simulator & Impulse Response loader
Notes: NuX Mini Studio brings 8 speaker cabinets into pocket size portability. Each impulse response (IR) file is captured from its own original source, processed with the state-in-art audio technology. At the end of the signal chain, Mini Studio processes preamps and drive effects through accurate cabinet simulation to produce a rich, natural and musical tone for recording or feeding direct into a PA. The Space control adjusts the amount of room early reflections for added dimension. Load and edit cabinet IR models via USB using the downloadable Mini Studio Software. Carry the sound of your favourite guitar cabs in your pocket.
Read more
MRP:$116.28 SAVE 50%
 2 in stock $58.05
Nux NBP-5 Melvin Lee Davis Bass Preamp & DI Pedal Nux NBP-5 Melvin Lee Davis Bass Preamp & DI Pedal
NUX
Cat: 778736 Rel: 16 Jul 20
 
Preamp + DI pedal
Notes: Signature preamp pedal of acclaimed U.S. bass guitar virtuoso Melvin Lee Davis. Features include 3-band EQ with swept mid-band, separate Drive footswitch for extra gain on demand, Impulse Response loader for custom cabinet simulation and balanced D.I. output for feed direct to a live or studio mixing console. Additional jack output, through connection to an amplifier, auxiliary line input and headphone outputs give even further options. USB connection to a P.C. for recording and control via the proprietary NuX software provides deeper editing possibilities. For ultimate bass tone, the MLD preamp can be the main control unit for any live or studio rig.

Specification
Power supply: 9Vdc, >150mA adaptor (not supplied)
DC input connection: 5.5 x 2.1mm DC jack
InputsInstrument: 6.3mm jack, Aux 3.5mm jack
Outputs: 6.3mm jack Out + Thru, XLR D.I. and 3.5mm headphones jack
Frequency response: 20Hz - 20kHz (-1dB)
Dynamic range: 100dB
Sampling format: 48kHz 32-bit
PC Com port: Micro USB (audio/firmware/editing)
Dimensions: 115 x 105 x 58mm
Weight: 460g

The box for this item contains :

MLD bass preamp + D.I.
Read more
MRP:$207.73 SAVE 33%
 2 in stock $139.35
Click for better price!
or call +44 20 7424 1960
quote 778736
Korg Nu:Tekt ODS Nutube Overdrive Pedal DIY Kit (no soldering required) Korg Nu:Tekt ODS Nutube Overdrive Pedal DIY Kit (no soldering required) Korg Nu:Tekt ODS Nutube Overdrive Pedal DIY Kit (no soldering required)
Cat: 761633 Rel: 08 Jun 20
 
overdrive pedal DIY kit
Notes: Building your own custom effects pedal from scratch is now possible with the OD-S Overdrive kit. Experience the fun of DIY by easily building and customizing your own overdrive pedal; no soldering required! Furthermore, the OD-S is equipped with a powerful Nu:tube fully analog triode vacuum tube for a warm sound and rich harmonic response that will delight all guitarists. Build your own FX pedal Creating your own pedal can seem like a daunting task and the results aren't guaranteed. The OD-S offers a solderless, easy-to-build kit that is also customizable to help you shape the overdrive tone that's as individual as you. Authentic tube sound Nutube is a new and revolutionary fully analog triode vacuum tube developed by KORG INC. and Noritake Itron Corporation. The same as a conventional vacuum tube, Nutube is constructed with an anode, grid and filament, and operates as a complete triode tube, effectively generates the same performance response and rich harmonic characteristics of conventional vacuum tubes in a more compact, stable and energy-efficient way. Plenty of sonic possibilities The OD-S has 2 GAIN knobs. In addition to adjusting the input level to the vacuum tube (GAIN), the anode load of the vacuum tube amplification circuit can be changed using the TUBE GAIN. This allows you to accurately adjust the sound from the vacuum tube to your liking. The OD-S also incorporates a switch that lets you choose between 2 different overdrive types (with different Low - High ranges) along with True Bypass; making it an ideal pedal for live performances. For advanced users who want to customize their tone further, the modification-friendly layout allows you to change out discrete components to create your own unique pedal to match your desired tone and performance. The possibilities are endless.

Specifications:
Vacuum Tube: Nutube 6P1
Connections: INPUT/OUTPUT (monaural stereo jack), DC 9V stereo minijack
Power: Single 9V alkaline battery(6LF22/6LR61) (sold separately) or a DC9V AV adapter (sold separately) KA181(DC9V)
Battery life: Approx. 10 hours
Power Consumption: 46mADimension
(W x D x H):122.×.96.×.55mm.
Weight: 340g (without batteries)
Options: KORG AC adapter KA181 (DV9V)
Read more
MRP:$286.12 SAVE 32%
 1 in stock $193.79
Click for better price!
or call +44 20 7424 1960
quote 761633
Electro Harmonix Nano Bass Big Muff Pi Distortion Sustainer Pedal
Cat: 560339 Rel: 04 Feb 15
 
Distortion/sustainer effects pedal with true bypass for maximum signal path integrity
Notes: The new Nano Bass Big Muff is the latest EHX bass guitar, effect pedal. It delivers that huge Bass Big Muff sound in a nano-sized package.

With voicing inspired by the battle-tank green, Russian Big Muff and a classic Big Muff Pi layout of Sustain, Tone and Volume controls, it provides sounds ranging from a slight but satisfying grit to an over-the-top wall of bass fuzz.
Read more
MRP:$99.29 SAVE 17%
 2 in stock $82.74
Click for better price!
or call +44 20 7424 1960
quote 560339
Items 1 to 50 of 373 on page 1 of 8
1  2  3  4  5  6  7  8  »

Filter

Saved Searches
Save current search
Release Date
Close