Search dance music

Notes: The H1N-VP; The world's most popular recorder now includes everything.

More value for creators

The H1n is loved by musicians, podcasters and filmmakers because of its incredible audio, ease of use and small size. Now the H1n-VP includes a padded shell case, micro USB cable, AD-17 Power Adapter and foam windscreen, offering creators more value than ever before.

Zoom's flagship sound

The H1n is the ultimate take-anywhere recorder for every creator's gear bag. Its X/Y microphones capture high-quality stereo sound, supporting up to 24-bit/96 kHz.

Just press record

One-touch button controls make it simple to record songs, audio-for-film, lectures, podcasts and more. Its monochromatic 1.25" LCD display is easy to read even in the brightest lighting conditions.

Get loud

An advanced onboard limiter offers distortion-free recording up to 120 dB SPL-- the same volume as a jet engine during take off. A low-cut filter helps eliminate pops and unwanted low frequency rumble.

Unlimited overdubbing

The H1n is the perfect song-writing companion, allowing you to build compositions and layer audio with the overdub function.
Transcription made easy


The H1n playback speed adjustment helps you transcribe music, interviews and other types of recordings without altering pitch.

Don't miss the moment

You can set the H1n to auto-record, pre-record and use the self-timer to make sure you always capture the moment.

Mark and sync

The built-in tone generator makes it easy to calibrate your H1n and camera audio levels.

A closer look

Maximum Capacity

The H1n is battery-powered and offers up to 10 hours of recording time. Put it in your pocket, toss it in your backpack, or mount it to a camera - the H1n travels wherever you do.

What's in the box

Here's what you get:

H1n Handy Recorder
Windscreen
AD-17 AC adapter
USB cable
Padded-shell case

Features of the H1n:

One-touch button controls
1.25" monochrome LCD display
Intuitive menus for easy operation
Stereo X/Y 90-microphones handle up to 120 dB SPL
Stereo 1/8" Mic/Line In mini phone jack
Stereo 1/8" Phone/Line Output jack with dedicated volume control
Limiter button for input signal up to 120 dB SPL
Playback Speed Control, Voice Emphasize Filter, and Stereo Bounce functions
Auto-Record, Pre-Record, and Self-Timer functions
Supports up to 24-bit/96 kHz audio in BWF-compliant WAV or a variety of MP3 formats
Tone generator for filmmaking use with DSLR and video cameras
Records directly to SD and SDHC cards up to 32 GB
Micro USB port for data exchange to and from computer and use as an audio interface
Runs on only 2 standard AAA alkaline, Lithium, or NiMH rechargeable batteries, or AC adapter (AD-17)
Up to 10 hours of operation with alkaline batteries

Specs

Simultaneous playback tracks: 2
Simultaneous recording tracks: 2
Functions: Lo-cut Filter, Limiter,Test Tone,Slate-Tone,Voice Emphasize Filter, Playback Position Skipping, Playback Speed Control, A-B Repeat, Auto REC Level, Marker, Auto-Record, Pre-Record, Self-Timer, Overdubbing
Recording formats: .wav: 44.1 kHz/16-bit, 48 kHz/16-bit, 48 kHz/24-bit, 96 kHz/24-bit; A/D conversion: 24-bit, 128x oversampling; D/A conversion: 24-bit, 128x oversampling
Signal processing: 32-bit
Recording media: microSD/microSDHC cards (Class 4 or higher, up to 32 GB
Display: 1.25" monochrome LCD (96 × 64)
Built-in stereo mic: Unidirectional condenser, 90- XY stereo format
Gain: Up to +39 dB
Maximum sound pressure level: 120 dB SPL
Inputs: 1/8" stereo phone jack, Rated input level: Up to -39 dBm, Input impedance: 2 kO, Plug-in power supported (2.5 V)
Built-in speaker: Built-in 500 mW mono speaker
Output impedance: 8 O
Outputs: 1/8" stereo phone jack (combined line/headphones) Rated output level: 20 mW + 20 mW into 32O load
Output impedance: 10 kO or more
USB: Micro USB port
Mass storage class operation: USB 2.0 high speed
Audio interface operation: 44.1/48kHz sampling rate, 16-bit depth, 2-in/2-out
Transfer method: asynchronous
Power requirements: 2 AAA batteries (alkaline, nickel-metal hydride rechargeable, or lithium)
AC adapter (ZOOM AD-17): DC 5V/1A
USB bus power
Battery life (alkaline batteries): Approximately 10 hours (continuous recording time using built-in mic, 44.1 kHz/16-bit)
Dimensions: 1.9 in (W) x 5.4 in (D) x 1.2 in (H) / 50 mm (W) × 137.5 mm (D) × 32 mm (H)
Weight: 0.13 lbs / 60 g (without batteries)

Notes: Zoom H1essential - 32-Bit Float Recording for All

The World's Easiest Recorder, Just Got Easier

With the push of a button the H1essential captures perfect audio for musicians, podcasters, filmmakers, and content creators. Simply hit record and discover the power of 32-bit float.

32-Bit Float Magic

With 32-bit float recording, you never have to adjust levels. The H1essential captures every nuance of your sound ensuring high-quality audio with every take

The First Handy Recorders with Accessibility

The Essential Series was designed with Accessibility for the blind and visually impaired. Navigate the menu with audible descriptions through the built-in speaker or headphones. Creators can choose English, Spanish, French, Japanese, German, Italian or Chinese.

Loud and Clear

The onboard X/Y microphones capture clean audio up to 120 dB SPL, equivalent to the sound of a high-performance engine.

The Perfect Practice Companion for Musicians

Musicians can use the H1essential to record every rehearsal, a great way to improve your playing. Features like overdubbing and playback-speed-adjustment are great for writing and practicing.

Sound Makes the Scene

The H1essential is great for filmmakers. Record and send audio directly to your camera or use it to record sound effects to complete your scene.

For Storytellers

Podcasters can mount the H1essential on a tripod for sit down conversations or use 'mono mode' for on-the-go interviews.

Big Features, Small Package

The H1essential has advanced features such as overdubbing, pre-record, auto record, and playback speed adjustment.

Features

32-bit float recording: perfect audio with no need to set gain
120 dB SPL 90 degree XY Mics
Records up to 96kHZ sample rate
New OLED Display
Overdubbing, auto record, pre-record and timer functions
USB Microphone Function
Audio guidance function for the blind and visually impaired
10 hours of battery life on 2 AAA Batteries or USB-C Bus power

Specs

Inputs

Built-in mic: 90 degree XY stereo format
Directionality: Unidirectional
Sensitivity: -37 dB/1 Pa at 1 kHz
Maximum sound pressure input: 120 dB SPL

MIC/LINE IN jack

Connector: Stereo mini jack
Input impedance: 2 kO or more
Plug-in power: 2.5 V

Built-in mic
90 degree XY stereo format
Directionality: Unidirectional

Outputs

PHONE / LINE OUT jack
Connector: Stereo mini jack
Maximum output level: 20 mW + 20 mW(into 32O load)
Output impedance: 10 O or less
Built-in speaker Type: 20 x 30mm oval dynamic speaker
Practical maximum output: 250mW

Recorder
Recording formats:
WAV
44.1/48/96 kHz, 32-bit Float
Stereo / Mono
BWF and iXML formats supported

Recording media
4-32GB cards compatible with the microSDHC specification
64GB-1TB cards compatible with the microSDXC specification

Display
OLED: 128 x 64

USB
Connector: USB Type-C (Use a USB cable that supports data transfer.)
USB Mic: USB 2.0 High Speed
48 kHz, 24-bit
File transfer: USB 2.0 High Speed

Power

2 AAA batteries Alkaline, Lithium, or Rechargeable NiMH
AC adapter: ZOOM AD-17: DC 5 V/1 A
USB bus power is supported.

Estimated continuous operation time using batteries

Alkaline batteries: About 10 hours
NiMH batteries (800 mAh): About 9 hours
Lithium batteries: About 18 hours
Stereo recording, 48kHz/32-bit float, no headphones, Power Save 1min
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.
They will vary greatly according to use conditions.

Power consumption: 5 W maximum
Dimensions: 53.9 mm (W) × 136.6 mm (D) × 29.0 mm (H)
Weight (including batteries): 92 g
Note: 0 dBu = 0.775 Vrms

Notes: The Wave is the latest addition to Zomo's popular VS-Rack series. This stylish record rack offers - depending on the thickness of the LPs and stack white - space up to 40 records. Thereby the records can be stacked in 2 different ways in the rack: Either classically between the ribs or also crosswise, so that you can quickly browse through your favorite vinyls.

Like all VS-Rack shelves, the Wave is made of powder-coated steel and convinces not only with its stable and safe stand, but also with its unique look, which makes it an eye-catcher in every living room or studio. The Wave is available in 4 different colors, so that it can fit into any ambience.

Technical data
Weight: 2,5 kg
Dimensions (W x D x H): 300 x 300 x 220 mm
Format: LPs
Capacity: up to 50 pieces
Material: Metal

Notes: The Wave is the latest addition to Zomo's popular VS-Rack series. This stylish record rack offers - depending on the thickness of the LPs and stack white - space up to 40 records. Thereby the records can be stacked in 2 different ways in the rack: Either classically between the ribs or also crosswise, so that you can quickly browse through your favorite vinyls.

Like all VS-Rack shelves, the Wave is made of powder-coated steel and convinces not only with its stable and safe stand, but also with its unique look, which makes it an eye-catcher in every living room or studio. The Wave is available in 4 different colors, so that it can fit into any ambience.

Technical data

Weight: 2,5 kg
Dimensions (W x D x H): 300 x 300 x 220 mm
Format: LPs
Capacity: up to 50 pieces
Material: Metal

Notes: The Zomo VS-Box Space is a state-of-the-art solution for the storage of vinyls. It captivates with its extraordinary design and high quality. It is laminated with a durable, water-repellent decor available in four different colours.

The Vinyl Box is quick and easy to assemble and the exclusive design will inspire you. This piece of furniture is a real eye-catcher for every living room.

The capacity can vary depending on the thickness of the records.

Technical specifications

Dimensions (W x D x H): 460 x 400 x 370 mm
Weight: 3,7 kg
Format: LPs
Capacity: 100-150
Material: Wood

Notes: The Zomo VS-Box Space is a state-of-the-art solution for the storage of vinyls. It captivates with its extraordinary design and high quality. It is laminated with a durable, water-repellent decor available in four different colours.

The Vinyl Box is quick and easy to assemble and the exclusive design will inspire you. This piece of furniture is a real eye-catcher for every living room.

The capacity can vary depending on the thickness of the records.

Technical specifications

Dimensions (W x D x H): 460 x 400 x 370 mm
Weight: 3,7 kg
Format: LPs
Capacity: 100-150
Material: Wood

Notes: The Zomo VS-Box 200 is a practical way to store your vinyl in a stylisch and efficient way.

The VS-Box 200 is made of solid wood and laminated with tough water-repellent dekor. This model is easy to install, multiple stockable and can be combinated with other VS-Boxes. The Box is also compatible to vinyls in protection covers.

The capacity can variate by the thickness of your vinyl.

Notes: The Zomo VS-Box 200 is a practical way to store your vinyl in a stylish and efficient way.

The VS-Box 200 is made of solid wood and laminated with tough water-repellent decor. This model is easy to install, multi-stackable and can be combined with other VS-Boxes. The Box is also compatible to vinyls in protection covers. The capacity can be various by the thickness of your vinyl.

Notes: The Zomo VS-Box 200 is a practical way to store your vinyl in a stylish and efficient way.

The VS-Box 200 is made of solid wood and laminated with tough water-repellent decor. This model is easy to install, multi-stackable and can be combined with other VS-Boxes. The Box is also compatible to vinyls in protection covers. The capacity can be various by the thickness of your vinyl.

Notes: The Zomo Recordcase RP-80 XT is recordcase with 75/25 divide in a classic style. The butterfly lock can be closed with an padlock (available as an optional accessoiry). The comfortable handle is rounding this nice shaped case.

Tecnical Data

Capacity: approx. 80 LPs
External dimensions (W x D x H): 350 x 250 x 330 mm
Internal dimensions (W x D x H): 315 x 245 x 315 mm
Weight: 3,1 kg
Format: LPs
Capacity: 50-99

Notes: The Zomo HD-120 Mono-Stick is the particularly cool version of the Zomo headphone series, which is particularly popular in club use and features a swivelling ear cup and an ergonomic handle.

The detachable spiral cable has a very stable plug and can be changed in seconds.

Particularly with this one-ear solution, it is important that the listener has enough pressure to be able to make the necessary volume even in extremely noisy environments such as discotheques. The kick-bass optimization mentioned above brings the desired effect.

The high-quality workmanship and the brilliant design create an increased style factor, which is particularly noticeable in the club area. The high-quality materials and drivers guarantee a long-lasting and professional sound experience of the highest quality.

Features:

Professional handheld headphones
Very good sound quality
Great processing
Transport bag, a set of imitation leather and velour padding are included in the extended scope of delivery

Technical Data

Cable: spiral cable, 3 meter, XLR to 6.3 jack plug
Adapter from 6.3 to 3.5 jack included
Frequency response: 30 - 30000 Hz
Efficiency: 110 dB
Weight: 253g
Headphone output: 1x 3.5 jack, 1x 6.3 Jack (with adapter)
Cable length: 3.0 m
Application area: DJ
Construction Type: On-Ear
System: Closed
Connection Mode: Cable
Rotatable auricle: No

Scope of delivery

Zomo HD-120 Headphones
Spiral cable 3 meter - XLR to 6.3 jack plug
Adapter: 6.3 jack to 3.5 jack
Carrying case
PVC ear-pad set
Velour Ear Padding Set

Notes: The Zomo HD-120 Mono-Stick is the cool variant of the Zomo headphone series.

The rotatable earpices and the ergonomic design makes the HD-120 a very populare choice when it comes to club performances. The removable spiral cables plug is build very solid and can be changed in seconds.

It is important for one-ear solutions to build up enough pressure to ensure an high sound level which is needed in loud environments like discos. Also the HP-120 has an kick-bass optimized frequency response.

The high quality and the brilliant design are an garantied eyecatcher in every club. The high-end materials and drivers are a garantie for a long livetime of these extraordinary professional sound experience.

www.youtube.com/watch?v=ZDpKE59vdIY

Notes: The Triple Cap Chaos(C^3 Chaos) is a 2hp analog, chaos based, noise oscillator, pseudo ring modulator/harmonics generator, and audio mangler Eurorack module available as a DIY Eurorack kit, PCB and Panel, or built.

It is a unique module, like the Diode Chaos, because it has never existed as a musical instrument until now. There is also no other module to my knowledge that can do exactly what the Triple Cap can do. The circuit(with several modifications) is based on the paper "Simple Autonomous Chaotic Circuits" by J.C. Sprott and Jessica R. Piper. As opposed to the Diode Chaos that generates control voltage this module focuses on the audio rate.

The "Emanate" potentiometer controls the coarser overall spectrum of the chaos, from lots of activity counter clock wise up to less chaos and more of a steady oscillation. The "Width, CV ATT" potentiometer can be thought of as more of a fine control for the chaos/oscillator. When something is inserted into the "CV" in the voltage normalization from the width knob is broken and the potentiometer now acts as an attenuator for the incoming cv. The Triple Cap is not a traditional volt per octave exponential VCO, and has a sort of narrow frequency range to exploit the chaotic behavior.

It expects a +5v to -5v max signal in to modulate the chaos. The "IN" jack is an A.C. coupled input for audio in, although cv and audio can work for both the "CV" in jack and "IN." The "IN" will interfere and interact with the onboard chaotic oscillator depending on the frequency of the input, which may take some experimentation. It can create ring mod ish sounds, to added harmonics, to almost bit crushed sounds depending on the "X" or "Y" output. The "X" output is a more windy noisy sinusoidal based output and the "Y" output is more squared off and aggressive, harsher sounding output.

Some quirks about the Triple Cap: The "X" output can offset negatively or positively a little bit depending on the pot settings, but both outputs tend to stay around 10vpp. With the "Emanate" and "Width" pots all the way up the typical frequency will be around 150hz although some will reach 200hz at this setting. With the "Emanate" pot full counter clock wise "Width" pot full clock wise the frequency will be around 250hz. It is possible to send signals into the triple cap that can bring it out of the desired range causing the oscillation to cut out.

The Triple Cap has a double sided panel. meaning one side has the classic graphics and the other is Soulless with less graphics.

Notes: The Entropy Expander is a 3hp Analog Random Voltage Generator that expands upon the features of the Entropy Euroack Module. Available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

The Entropy+Expander packs together some of the most random voltage options in 6hp. It provides a controllable "Glide"(slew) out for the S/T\H, a comparator with a controllable rate("Thrsh") of random gates("Rand Gate") out with an input to compare other waveforms(Comp In, inserting a cable into here breaks the white noise normalization), and high pass filtered white noise resulting in approximate "Blue noise" (+3db/octave) and "Violet noise"(+6db/octave) outs.

The unique part of the circuit is a voltage controlled A/B switch thats normalled to the "Rand Gate" out that's switching between the S/T\H out(left Blue led window)and Infra out(right Red led window), the Glide control also effects the S/T\H coming out of the switch so you can get really random results from the "Entropy Out." Inserting a cable into "Switch CV In" breaks the random gate normalization and lets you toggle between A/B(left S/T\H out and right Infra out, indicated by the led windows) with your own gate or trigger.

There is a jumper on the pcb to select if you want glide on the s/t\h at, Entropy out, or un-slewed operation. There is also a trimmer for setting the amplitude of the incoming signal at "Comp In" which sets the frequency range of random gates. This may have to be adjusted depending on your Entropy version.

The random gate range can also be set up more as a noise oscillator by turning the pcb trim(clockwise) up or it can be set so random gates are extremely slow(trim counter clockwise) with minutes between random gates.

Notes: The Dual VCA is a 2hp 2 channel Analog VCA and Mixer Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

It is a DC coupled OTA(LM13700) Dual Linear VCA based on the same fabled design of the VnIcursal VCA. The 2 VCAs are summed together so it can be used as a voltage controlled mixer at the "SUM OUT" or all 3 outs can be used separately and simultaneously. 5 volts into the CV in will provide unity gain, anything above 5 volts can clip the input.

Notes: Diode Chaos is a 3hp analog chaotic low frequency voltage generator Eurorack Module available as Eurorack DIY Kit, PCB and Panel, or Built Module.

It is a unique module because it has never existed as an electronic music instrument until now. The module is based on a circuit from a paper called "A simple chaotic circuit with a light-emitting diode" written by Volos, Wang, Jafari, and Kapitaniak.

Diode Chaos produces 3 phases of interrelated morphing voltages including a chaotic trigger out. The range is 20-30 seconds a cycle up to audio rate, although only the X out and TRIG out go up to audio rate. The frequency is controlled by the RATE knob. Each output exhibits different behavior at different rate settings. X,Y, and Z outs like to stay in the 4vpp range although at different RATE settings the outs can reach 10vpp. The TRIG out chaotically releases 0-10v triggers although sometimes it will spit out smaller voltage peaks.

LED soldermask windows provide constant display of positive and negative voltage crossings.

Differences between chaos and random(some quoted and summarized material from Ian Fritz's site):

Chaos is "highly irregular, but still contained within a finite region (the "strange attractor")"

Chaos occurs in 3 dimensions.

Chaos needs a non-linear element (with Diode Chaos the nonlinear element is a red LED, and the chaos is directly visible and useable at the TRIG out).

Notes: - Works as a messenger style bag or a backpack
- Space for cables and AC adapter
- Built-in loop for attaching the bag to a suitcase handle

*Photographed Reface unit NOT included*

Notes: Warna is a very useful utility module that helps you to manage control voltages in the system. Crammed in just 6 hp, there are five normalled sections: two buffered mults, two inverters, and a summing mixer. Each multiple routes the input signal to separated outputs without loss in voltage. Warna is designed for unity gain - if you apply a specific voltage to any input, it remains the same on the respective outputs. Inverters are hardwired to mults and invert the polarity of the signal applied to them. Both mults are also normalled to the mixer section via inputs. Patching anything to these inputs breaks the normalization.

The top and the bottom section both are buffered 1-in-4 multiples. The input can be inverted with a switch, i.e. its polarity will be changed by 180 degrees. Four inverted copies are then available at the outputs, meaning you can use these two sections as inverter. Bi-polar LEDs display whether the signal is positive or negative: yellow = negative, red = positive. The centre section is a four-input summing stage with amplification factor 1, a so-called unity-gain mixer. The multiples are normalized to the mixer which can be deactivated by patching.

Notes: Poti II expander notable features:

- per-channel input and output attenuation for the SINE and ASSGN outputs
- per-channel shape modulation with switchable destination (wave folding, shape switching, PWM)
- stores settings during a power cycle
- LED indication of the discrepancy between the stored setting and current pot position
- 4HP
- +10/-0mA from Batumi II

Notes: Show off the cover of the record you're spinning.

Now Playing album cover stand by WAXRAX provides a full view of the album cover you're spinning.

Skillfully crafted from solid hardwood and hand worked brass.

Album cover rests gently in an extra wide slot fully supported by the brass rail without stress or flex to the record cover itself.

Choose from solid Walnut or Maple hand finished with Danish oil.

Designed to show off both LP, EP and 45 sleeves, the Now Playing by WAXRAX is the stylish way to display your album art while spinning vinyl.

Made in the USA

*** Record not included, this is for demonstration purposes only. ***

Notes: This module is a four-quadrant multiplier that produces distinct alien and bell type sounds.

It features standard carrier (X) and modulator (Y) inputs; each with their own attenuator.

The balance and offset of the output signal is also adjustable.

Specifications

Format: Eurorack
Width: 5hp
Depth: approx. 40mm
Power consumption:
+12V: 20mA
-12V: 20mA
+5V: 0mA

Notes: Wavefonix's Logarithmic Attenuator (AT) features three logarithmic unity-gain attenuators; especially suitable for attenuating audio signals. However, it can also be used to attenuator CV signals.

It is also a passive module; meaning that no power is required for it to function.

Specifications

Format: Eurorack
Width: 5hp
Depth: approx. 15mm
+12V: 0mA
-12V: 0mA
+5V: 0mA

Notes: Attenuverter (AV) is one of Wavefonix's most versatile modules; allowing the polarity of an input source such as an envelope or a ramp wave from an LFO to be inverted.

Additionally, an offset voltage between approximately -10V to +10V can be applied to the input source. The module can also act as an independent CV source when there is no input.

Specifications

Format: Eurorack
Width: 5hp
Depth: approx. 25mm
Power consumption:
+12V: 30mA
-12V: 20mA
+5V: 0mA

Notes: This mixer has six DC-coupled inputs, making it perfect for mixing both audio or CV signals from sources such as VCOs, LFOs and envelopes etc.

Each channel features a unity-gain, linear attenuator.

Specifications

Format: Eurorack
Width: 12hp
Depth: approx. 25mm
Power consumption:
+12V: 10mA
-12V: 10mA
+5V: 0mA

Notes: Featuring the AS3360 IC (based on the classic CEM3360 IC), this linear response VCA (Voltage Controlled Amplifier) is suitable for both audio and CV signals.

It would also be the ideal match with a modulation source such as an exponential envelope generator.

Specifications

Format: Eurorack
Width: 8hp
Depth: approx. 25mm
Power consumption:
+12V: 30mA
-12V: 30mA
+5V: 0mA

Notes: This mixer has three DC-coupled inputs, making it perfect for mixing both audio or CV signals from sources such as VCOs, LFOs and envelopes etc.

Each channel features a unity-gain, linear attenuator.

Specifications

Format: Eurorack
Width: 8hp
Depth: approx. 25mm
Power consumption:
+12V: 10mA
-12V: 10mA
+5V: 0mA

Notes: This mixer has three AC-coupled channels, each with a logarithmic unity-gain attenuator; suitable for mixing audio signals from modules such as VCOs etc.

Specifications

Format: Eurorack
Width: 8hp
Depth: approx. 25mm
+12V: 20mA
-12V: 20mA
+5V: 0mA

Notes: Wooden side cheeks for The Vermona DRM1 (any mark).

If you would like to use those instruments as desktop unit you do cover the rack mount wholes with these nice wood sides, the unit feels much more handable and robust while packaging and using it in your live set.

Notes: The TeleLock Series speaker stands from Ultimate Support are extraordinarily strong yet lightweight due to its over-sized heavy wall aluminum tubing. They're everything you'd expect from an Ultimate Support speaker stand - they're strong, sturdy, lightweight, 100% field serviceable, and easy to set up and take down. However, the TeleLock collar gives the user the ability to safely raise or lower the stand WHILE a speaker is on it thanks to the Auto-lock technology that securely grips the telescoping tube in place as you set its height.

The TS-90 is one of the easiest speaker stands to use thanks to its patented TeleLock collar. Set the TeleLock collar to either the "Raise" or "Lower" setting and the Auto-lock technology provides just the right amount of resistance to allow you to raise or lower the speaker while locking the tube in place as you go. It's like having tour support built into your speaker stand!

The TS-90's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs.

The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-90 will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.

From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-90 is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-90, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!

Notes: UDG presents the Urbanite Series, cutting edge bags for today's on the go DJ's / Producer's. Each design not only makes you feel good, they make you look great. The Controller Sleeve lets you take a wide variety of your essential gear for your digital set up from one gig to the next. The main compartment includes high-density egg-crate interior padding that protects jog wheels, faders and buttons of various sized equipment. It let's you safely store your digital controller (such as the Native Instruments S3/ S4 MK3/ S2 MK3 or Pioneer DDJ-REV1/ 400 or Numark Mixtrack Pro FX) in the main compartment. The UDG Controller Sleeve is available in 3 sizes: Medium, Large & Extra Large skilfully designed to fit many different models of equipment safely during transport.

Specifications

Colour: Black
Weight 1,70 kg / 3.74 lbs
Outer Dimensions (W x H x D): 56.5 x 37 x 18 cm | 22.2 x 14.5 x 7.1 inch
Inner Dimensions (W x H x D): 54 x 34 x 9 cm | 21.3 x 13.4 x 3.5 inch
Material: Water repellent laminated 600D Polyester exterior
Protection: Egg Crate interior protects jog wheels, faders & buttons
Adjustable foam inserts to customize main compartment to your gear

Extras

Easy grip zipper pulls
Convenient carry handle
Padded shoulder strap

Fits:

NI Traktor Kontrol S3, S2 MK3, S4 MK3, S5, S2 MK2, S4 MK2, Komplete Kontrol S25
Pioneer DDJ-REV1, DDJ-400, DDJ-RB, DDJ-SB3, DDJ-SB2, DDJ-SB, Toraiz SP-16
Numark Mixtrack Pro FX, Mixtrack Platinum FX, NVII/ NV, Mixtrack Pro II, Mixtrack Quad, Mixtrack Pro
Reloop Beatmix 2 MK2, Beatpad 2, Terminal Mix4, Terminal Mix 2
Denon DJ Prime Go, MC6000MK2, MC4000, MC3000, MC2000
Akai MPC Live II, MPC Renaissance, APC-40 MKII, MPK225, MPD232
Novation AFX, Nocturn 25, Launchkey 25, Impulse 25, 25SL MK2
Hercules DJControl Inpulse 300, Universal DJ, DJControl Jogvision/ Air+/ Air+S/ Wave, DJConsule 4-MX, DJConsole RMX 2
Korg Minilogue, Taktile 25
American Audio VMS 5/ VMS 4
Behringer CMD Studio 4A
Allen & Heath Xone 4D
Livid OHM 64
Arturia Origin Desktop
M-Audio Xponent, Axiom 25
Mixars Primo
Gemini G4V DJ, GMX, Slate 4/ 2
Roland DJ 202, JP-8080
Stanton SCS.4DJ
American Audio VMS 4 / 5
Vestax VCI-380, VCI-400DJ, VCM 600
or similar size controllers

Notes: The SlingBag is a medium size bag that holds approximately 50 Vinyl records or a (MIDI) controller, an Audio Interface, a Headphone and cables. A perfect bag for the starting DJ.

It has a pocket on each side and one full size pocket in the front. Next to this the bag features the special steel bolts which make it impossible for grips and straps to break loose from the bag. The SlingBag can be used as a set in combination with the UDG SlingBag Trolley. A perfect size bag for a quick DJ set!

*Photographed records are not included

Notes: The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your valuable records safe.

UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your valuable records safe.

Specifications

Colour: Silver
Weight: 2,50 kg / 5.5 lbs
Outer Dimensions (W x H x D) 35.0 x 36.0 x 29.5 cm | 13.8 x 14.2 x 11.6 inch
Inner Dimensions (W x H x D) 33.0 x 34.0 x 27.5 cm | 12.9 x 13.4 x 10.8 inch
Material: Aluminium

Extras

Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Fits: Approximately up to 80 12"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

Notes: The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your valuable records safe.

UDG have further fined-tuned already a great design concept of the flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your valuable records safe.

Specifications

Colour: Black
Weight: 2,50 kg / 5.5 lbs
Outer Dimensions (W x H x D) 35.0 x 36.0 x 29.5 cm | 13.8 x 14.2 x 11.6 inch
Inner Dimensions (W x H x D) 33.0 x 34.0 x 27.5 cm | 12.9 x 13.4 x 10.8 inch
Material: Aluminum

Extras

Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle

Fits: Approximately up to 80 12"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

Notes: UDG have further fined-tuned already a great design concept of a flight case into one specially for the most discerning DJ/producer. Constructed from aluminium thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your gear safe.

Specifications

Colour: Silver
Weight: 4,55 kg / 10.01 lbs
Outer Dimensions (W x H x D): 49 x 42.3 x 21 cm | 19.3 x 16.6 x 8.3 inch
Inner Dimensions (W x H x D): 48 x 41.3 x 20 cm | 18.9 x 16.2 x 7.9 inch
Material: Aluminium
Protection: Corrosion resistant aluminium profiles with strong rounded corners

Fully-lined with high density foam protective padding & foam on lid
Two side strong butterfly lock & solid metal hinges
Rubber feet at the bottom for support in standing

Extras

Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers
Replacement pick & pluck foam is available to purchase
Rear cable access hole with cover

Fits:

Technics SL-1200MK7, SL-1200MK6, SL-1200 MK5, SL-1200 MK4, SL-1200 MK3, SL-1200 MK2, SL-1200GR, SL-1200GAE
Denon VL12 Prime
Pioneer PLX-1000, PLX-500
Reloop RP-8000 MK2, RP-8000 Straight, RP-8000, Reloop RP-1000M, RP-1000 MK2, RP-2000 MK2, RP-2000 USB MK2, RP-4000 MK2, RP-7000, RP-7000 MK2, RP-7000 MK2 GLD, RP-7000 MK2 Silver
Audio Technica LP120-USB, LP120XUSB, LP1240-USBXP, LP1240-USB, LP140XP, LP3, LP5, LP7, LPW40WN
Stanton STR8-150 M2, ST-150 M2, T.52, T.55 USB, T.62 M2, T.92 M2 USB,
Mixars STA, LTA
Vestax PDX-3000, PDX-3000Mix, PDX-3000MKII
Or similar sized turntables

Notes: UDG have further fine-tuned already a great design concept of a flight case into one especially for the most discerning DJ/ producer. Constructed from aluminium, thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your valuable records safe.

Specifications

Colour: Black/Silver
Weight: 2,50 kg / 5.5 lbs
Outer Dimensions (W x H x D): 44.0 x 24.0 x 27.0 cm | 17.3 x 9.4 x 10.6 inch
Inner Dimensions (W x H x D): 41.8 x 20.6 x 25.2 cm | 16.4 x 8.1 x 9.9 inch
Material: Aluminium
Protection: Corrosion resistant aluminium profiles with strong rounded corners
Fully lined with high density foam protective padding
Strong butterfly lock and solid metal hinges
Rubber feet at the bottom for support in standing position

Extras:

Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Fits: Approximately up to 80 12"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

Notes: UDG have further fined-tuned what was already a great design concept of a flight case into one especially for the most discerning DJ/ producer. This is constructed from aluminium, thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your valuable records safe.

Specification

Colour: Black
Weight: 2,50 kg / 5.5 lbs
Outer Dimensions (W x H x D): 44.0 x 24.0 x 27.0 cm | 17.3 x 9.4 x 10.6 inch
Inner Dimensions (W x H x D): 41.8 x 20.6 x 25.2 cm | 16.4 x 8.1 x 9.9 inch
Material: Aluminium
Protection: Corrosion resistant aluminium profiles with strong rounded corners
Fully lined with high density foam protective padding
Strong butterfly lock and solid metal hinges
Rubber feet at the bottom for support in standing position

Extras

Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Fits: Approximately up to 200 7"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging

Notes: The UDG Starter record bag is a medium size bag that holds approximately 50 vinyl records. It's the perfect budget priced padded DJ bag for the starting DJ and a perfect chance for every DJ to have an original UDG product.
It comes with a detachable and adjustable shoulder strap and 2 hold-all straps that make it easy to carry. Your records will be extra protected by the foam padded PVC reinforced walls.

The UDG Starter record bag is a perfect bag for the starting DJ.

Notes: A professional guitarist/ musician looking for a professional, durable case solution for your Universal Audio OX Amp Top Box? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Universal Audio OX Amp Top Box, these cases are perfect for the travelling guitarist/ musician that needs to protect their equipment.

Specifications

Colour: Black
Weight: 1,40 kg / 3.08 lbs
Outer Dimensions (W x H x D): 42.5 x 28.8 x 15.0 cm | 16.7 x 11.3 x 5.9 inch
Inner Dimensions (W x H x D): 38.5 x 23.4 x 14.0 cm | 15.1 x 9.2 x 5.5 inch
Material: Durashock moulded EVA foam

Protection:

Water repellent laminated nylon exterior
Black soft fleece interior

Extras

Heavy duty handle
Easy grip zipper puller

Fits

Universal Audio OX Amp Top Box

Notes: A Digital DJ looking for a professional, durable case solution for your Rane One? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Rane One, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight: 2.27 kg / 4.994 lbs
EAN: 8718969214582
Colour: Black
Outer Dimensions (W x H x D): 68.5 x 42.6 x 14.9 cm | 26.9 x 16.8 x 5.8 inch
Inner Dimensions (W x H x D): 65.1 x 41.2 x 12.5 cm | 25.6 x 16.2 x 4.9 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior
Protective egg-crate foam

Extras:
Heavy duty handle
Easy grip zipper pulls
Convenient shoulder strap

Fits: Rane One Controller

Notes: A Digital Producer looking for a professional, durable case solution for your Pioneer DJM-A9? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer DJM-A9, this case is perfect for the travelling Producer that needs to protect their equipment.

Colour: Black
Weight: 1,54 kg / 3.388 lbs
Outer Dimensions (W x H x D): 45.2 x 48.3 x 14.0 cm | 17.8 x 19.0 x 5.5 inch
Inner Dimensions (W x H x D): 41.2 x 46.3 x 13.0 cm | 16.2 x 18.2 x 5.1 inch
Material: Durashock moulded EVA foam
Protection: Cover main material 600D polyester with 5 mm EVA durashock moulded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks

Extras

Convenient carry handles
Convenient shoulder strap
Easy grip zipper pulls
Fits: Fits Pioneer DJM-A9

Notes: A Digital DJ/Producer looking for a professional, durable case solution for your Pioneer DDJ-REV7? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer DDJ-REV7, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

Specifications

Colour: Black
Weight: 2,55 kg / 5.61 lbs
Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.0 cm | 30.4 x 18.4 x 5.1 inch
Inner Dimensions (W x H x D): 76.2 x 45.7 x 12.0 cm | 30.0 x 17.9 x 4.7 inch
Material: Durashock molded EVA foam
Protection: Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks

Extras

Heavy duty handle
Easy grip zipper pulls
Convenient shoulder strap

Fits: Pioneer DDJ-REV7

Notes: A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-REV5 controller? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer DDJ-REV5 controller, this case is perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight: 2,26 kg / 4.972 lbs
Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.0 cm | 30.4 x 18.4 x 5.1 inch
Inner Dimensions (W x H x D): 76.2 x 44.1 x 11.0 cm | 30.0 x 17.4 x 4.3 inch
Material: Durashock moulded EVA foam

Protection:

Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks
Extra's Extra space for cables or power adapter
Convenient carry handle and shoulder strap
Easy grip zipper pulls

Fits:

Pioneer DDJ-REV5 Controller + power adapter, extra cables

Notes: A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-FLX6? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer DDJ-FLX6, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight: 2.27 kg / 4.994 lbs
EAN: 8718969214599
Colour: Black
Outer Dimensions (W x H x D): 72.0 x 43.0 x 14.0 cm | 28.3 x 16.9 x 5.5 inch
Inner Dimensions (W x H x D): 68.8 x 34.7 x 6.8 cm | 27.1 x 13.6 x 2.6 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior
Protective egg-crate foam

Extras:
Heavy duty handle
Easy grip zipper pulls
Convenient shoulder strap

Fits: Pioneer DDJ-FLX6 Controller

Notes: A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-FLX4? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer DDJ-FLX4, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications:

Colour: Black
Weight: 1,78 kg / 3.916 lbs
Outer Dimensions (W x H x D): 61.0 x 38.0 x 12.5 cm | 24.0 x 14.9 x 4.9 inch
Inner Dimensions (W x H x D): 48.8 x 27.9 x 8.5 cm | 19.2 x 10.9 x 3.4 inch
Material: Durashock moulded EVA foam
Protection: Soft fleece interior
Protective egg-crate foam

Extras:

Heavy duty handle
Easy grip zipper pulls
Convenient shoulder strap
Fits: Pioneer DDJ-FLX4 Controller

Notes: UDG developed a light EVA turntable hard case designed for life on the road. The UDG Turntable Hardcase is constructed from durable lightweight compression moulded EVA material with a water repellent laminated nylon exterior. This quality case provides second-to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects turntable platter, faders and buttons of the turntable.

Specifications

Colour: Black
Weight: 3,17 kg / 6.974 lbs
Outer Dimensions (W x H x D): 51.0 x 42.5 x 21.0 cm | 20.1 x 16.7 x 8.3 inch
Inner Dimensions (W x H x D): 46.0 x 37.5 x 17.0 cm | 18.1 x 14.7 x 6.7 inch
Material: Durashock-moulded EVA foam
Protection: Soft fleece interior
Removable top-bottom egg crate foam prevent damage from vibrations and shocks

Extras

Includes adjustable foam pads to fit various turntables
Convenient carry handles
Convenient shoulder strap
Easy grip zipper puller

Fits:
- Technics SL-1200MK7, SL-1200MK6, SL-1200 MK5, SL-1200 MK4, SL-1200 MK3, SL-1200 MK2, SL-1200GR, SL-1200GAE
- Denon VL12 Prime, SC6000,
- Pioneer PLX-1000, PLX-500, CDJ-3000,
- Reloop RP-8000 MK2, RP-8000 Straight, RP-8000, Reloop RP-1000M, RP-1000 MK2, RP-2000 MK2, RP-2000 USB MK2, RP-4000 MK2, RP-7000, RP-7000 MK2, RP-7000 MK2 GLD, RP-7000 MK2 Silver
- Audio Technica LP120-USB, LP120XUSB, LP1240-USBXP, LP1240-USB, LP140XP, LP3, LP5, LP7, LPW40WN
- Stanton STR8-150, ST-150, T.52, T.55 USB, T.62, T.92 USB
- Mixars STA, LTA
- Vestax PDX-3000, PDX-3000Mix, PDX-3000MKII or similar size turntable