Search dance music

Notes: Play is a high-fidelity sample player with a full feature set.

Up to 32 samples can be loaded at a time and dynamically switched between using the file knob and associated CV input. Playback modes include one-shot, looping, or gated playback; all with extremely low latency. Transform your samples by pitching them up two octaves or down three octaves, all with a pitch knob that can be free running or quantized to semitones. The pitch CV input tracks volt per octave across its entire range and allows for musical sequencing of samples. Play ships with a pre-loaded SD card packed with loops, drum hits, and field recordings to get you up and running immediately.

Notes: Multi Delay and Reverb effect pedal with inside routing and secondary reverb effects. One of the best Delay and Reverb algorithms in a metal box. Special select 3 classic Delays & 3 classic Reverbs . . . and we added a bonus "Shimmer" and "Freeze" effects which let you create a dreamy waterfall shimmer~ especially handy for intros, interludes, and endings. And now, because of NUX's latest Core Image Technology, the new Verdugo Series effect pedals offer pro-level sound enhancement.

Notes: VCA 3X is a simple yet great solution for synth users looking to add more VCAs to their setup in a single and compact module. This module features 3 VCAs with individual Signal and CV inputs and outputs.

Notes: 4-input VCA stereo mixer w/ pan, stereo out, metering

50mm deep

Notes: Inspired and officially licensed from Teia's Stochastic Function Generator which was introduced in 2013 but is no longer available. This earlier version served as an inspiration, but with a completely rebuilt and reprogrammed mcu to a fully featured 4 voice 2 stage envelope and slew generator.

ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplateADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate
This expansion allows extra I/O to the ADDAC506, namelly:

Four trigger inputs for the random engine.

Four CV random outputs from the random engine.

Notes: 3xVCA offers three high class amplifier circuits with linear characteristic. Thanks to AC / DC compatibility, a very low noise floor and basically no distortion, the module is not only a great partner for control voltages, but audio material as well. Besides a signal input and output, each VCA has its own CV input. The dual potentiometers regulate levels and bipolar CV attenuation values of all amplifiers. Using these rather unusual, yet very practical components, it was possible to equip the 3x VCA with a front panel that is only 6 HP wide. Switches allow the user to feed the results of one amplifier to the output of the next amplifier, so we can get 1+2, 2+3, and 1+2+3 outputs mix. Two-colored LEDs visualize CV and output signals.

60 mA +12V
60 mA -12V
35 mm Depth

Notes: The Octave Fuzz is SynthRotek's take on the classic 70's SuperFuzz circuit, made into a Eurorack module, which has improved on some aspects of the original as well, including an increased output.

Two distinct voices like the original: switchable between scooped midrange and massive midrange bump.

Aggressive: It will sound massive and in-your-face like no other circuit can. This is for sonic explorers and heavy music only. In short, it's not useful for EVERYTHING, but the things it DOES do it excels at. Sounds especially killer for keyboard and bass sounds.

Tuned to give a subtle distorted waveform one octave up via wavefolding (see the video to view this on an oscilloscope). (Completed modules come pre-tuned; there are calibration instructions at the end of the assembly instructions for the kits)

This circuit has been optimized for Eurorack. You can find a guitar pedal version here.

Current Draw:
32mA @ +12v
24mA @ -12v
0mA @ +5v

Notes: The Face The Fuzz is a modern take on a classic sound, modeled after the Dallas Arbiter Fuzz Face but with some important upgrades and modifications. Get the original Germanium PNP transistors for that classic tone just like the likes of Jimi Hendrix, Duane Allman, and George Harrison played!

What is the difference between Synthrotek's two fuzz pedals: Face the Fuzz and the Arbiter Fuzz Face Clone? The Arbiter Fuzz Face Clone uses the classic circuit that is known and loved by many, and everybody loves a classic. The Face the Fuzz pedal has been designed with a few key changes to make it more useful to the modern musician: a wider frequency response, the ability to daisy-chain the power with a 1 Spot, and the option to use temperature-stable Silicon transistors.

The Face The Fuzz comes with hand-tested and selected premium AC128 NOS PNP transistors. All of the AC128s for optimum gain and leakage current so that they are guaranteed to bias properly and sound great! Lower gain transistorshave been chosen for Q1 and higher for Q2 according to strict standards. Be assured that you will be playing a premium product that takes the guess work out of Germanium transistor testing.

Notes: Excellent value from this uniquely versatile pedal. Load or record acoustic guitar impulse responses and apply them to your electric guitar, transforming the tone and sound.

Supplier's Notes:

The Optima Air pedal is a programmable digital modelling acoustic guitar simulator for electric players. Plug in your electric guitar and morph it into any of 15 internal acoustic guitar models at will. An Impulse Response (IR) loader enables you to capture the tone profile of your favourite acoustic guitar and store it as a model that can be played from your electric guitar. To enhance the acoustic tone, the Optima Air is furnished with a foot-switchable studio quality preamp with 3-band EQ and a digital reverb section to generate ambience. The Optima Air also has an audio streaming USB interface providing, which can be used as a recording device and the USB can be used for remote editing via software which is downloadable for PC or Mac computer. Inputs and outputs include standard jack in and out, a D.I. XLR output, send/return effects loop, headphone output and aux line input for a myriad of connection possibilities. Optima Air is the acoustic guitar in a pedal for electric players either on stage or in the studio.

Power supply: 9Vdc, 500mA, negative centre (not supplied)
Sampling format: 24-bit, 48-kHz
Internal programmes: 15 models, 9 preset patches
DI output: XLR
USB computer interface: Micro USB port

The box for this item contains :

Optima Air pedal

Notes: Upgrade to Studio One 4 Professional from any prior version of Studio One Professional OR Producer!

There's a very good reason why so many musicians have switched to Studio One from older, more rigid programs. Built on a modern foundation that's not bogged down by legacy code, Studio One provides an efficient, creative companion from initial inspiration to final master. Its efficient, single-screen interface houses an unlimited number of tracks, intuitive editing tools, advanced virtual instruments, mastering, and video player- you spend your time creating music, not wondering what to click next. The 64-bit double-precision mix engine is state of the art, while the smooth, analog quality of the virtual instruments comes from proprietary techniques that provide much higher controller resolution. That's why Studio One just plain sounds better.

The reason why Studio One resonates with musicians is simple: PreSonus listens. Many new features in Version 4 are the direct result of user feedback, including AAF import/export so users can bring song data from their old DAW into Studio One. Add the most flexible arranging tools of any music program, full integration with Notion for superior notation, over 20 GB of carefully curated content, analog console emulation, advanced step sequencing, unified hardware control with the FaderPort series of hands-on controllers, and much moreiit's no wonder that Studio One continues to gain new followers every day.

Create Without Boundaries - Produce Without Limits

System Requirements:
Windows

Windows 7 (SP1 + platform update), Windows 8.1 or Windows 10 x64
Studio One 4 operates on 64-bit operating systems only.
Intelr Core Duo or AMD AthlonX2 processor (Intel Core 2 Duo or AMD Athlon X4 or better recommended)
4 GB RAM minimum (8 GB or more recommended)
Internet connection (needed for installation and activation)
Monitor with 1366 x 768 resolution (high-dpi monitor recommended)
A multi-touch enabled monitor is required for touch operation
40 GB hard-drive space
Mac

macOSr 10.11 or higher
Studio One 4 operates on 64-bit operating systems only.
Intelr CoreTM 2 Duo processor (Core i3 or better recommended)
4 GB RAM minimum (8 GB or more recommended)
Internet connection (needed for installation and activation)
Monitor with 1366 x 768 resolution (Retina display recommended)
A multi-touch enabled monitor with TUIO support is required for touch operation
40 GB hard-drive space

Notes: The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

What's the difference between Black3 and Green3?
Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Green3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Green3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Green2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

Notes: The Hungry Robot Sample & Hold provides basic S&H functionality with some added bells and whistles. It uses an internal clock dialed into a very useful range. If the internal clock rate is not to your liking, you can bypass the Rate knob by patching a clock signal into Clk In. The Sample & Hold has a built in attenuverter giving a bit of added control over the random voltages that are outputted. White noise out for uses elsewhere. Traditionally a S&H samples voltages from chaotic white noise, but E.In allows you to bypass the white noise and patch in your own sample source (i.e. patching an LFO in for a bit crushed LFO). As with all Hungry Robot "Modular Boxes" the Sample & Hold can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-MINUS/PLUS: Attenuverter for output. Allows you to sweep between positive and negative voltage outputs.
-RATE: On board clock source ranging from approximately 25ms to 1000ms.

PATCH POINTS
-E.IN: Bypasses internal white noise as a sample source. Patch in any CV source that you want to sample from
-STATIC: Taps into white noise output (0-5V range)
-CLK IN: Bypasses internal clock with your provided external clock
-S&H OUT: Two buffered outputs of S&H voltage

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel

Notes: Lovely little mono filter module in a compact desktop format. Based on the classic Prophet 5 filter, ideal for processing synths and signals, hooking up to Eurorack or other Hungry Robot modules.

Supplier's Notes:

The Hungry Robot VCF is an all analog, 4-pole low pass filter with a self-oscillating resonance control. It is a close replication of the filter circuit found on the famous Prophet 5. It uses a HM2040 which is a high quality, faithful replication of the original SSM2040 chip. This resonant filter has a beautiful tonal quality. The over-sized knobs provide a satisfying tactile response. The cutoff frequency can be controlled by external control voltage. It has a built-in attenuator and invert switch for the incoming CV. CV input does not track at 1V/Oct, but is scaled to act as a VCA when a 5V signal is applied to CV input. As with all Hungry Robot "Modular Boxes" the VCF can be powered by a simple 9V DC, Negative Center power supply.

KNOBS
-FREQUENCY: Sweeps the cutoff frequency of the filter.
-CV: Attenuator for incoming CV input.
-RESONANCE: Sets resonance of filter. Small volume drop is to be expected. Will self-oscillate at higher settings.

SWITCHES
-INVERT: Inverts the incoming CV input. Toggle to the right to invert incoming CV

PATCH POINTS
-IN: Patch Audio Signal In
-CV: CV input for Frequency. Allows for CV control of this parameter.
-OUT: Patch Audio Signal Out

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel

Notes: The Acapulco Gold is a dirt-simple distortion Device modeled after the sound of a cranked vintage Model T amplifier, bringing the openness, clarity, and crunch that only a dimed tube amp can provide, at a fraction of the size, and without expensive maintenance costs!

Since tone is in the hands, the controls of the Acapulco Gold are as simple as possible. The footswitch turns the pedal on and off, and the giant knob controls the output volume. That's it. The rest is at your fingertips. Want less gain? Turn down your guitar's volume knob. Need a darker rhythm tone? Roll back your guitar's tone control. Easy, right?

Big Knob: The big knob sets the output level, sometimes known as Volume. PLEASE BE CAREFUL, the Acapulco Gold is extremely loud!

With your guitar's volume all the way up, the Acapulco Gold roars like a wide-open Model T on the verge of explosion. At just-barely-backed-off, the Gold becomes a raunchy overdrive. At minimum guitar volume settings, the Acapulco Gold delivers a hazy, Nashville-sounding spank to your tone.

How about this? If your guitar has separate volume and tone controls for each pickup and a three-way selector switch, this little one-knob banger becomes a three-channel tone monster at the flick of your wrist!

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 18 mA

Notes: Open up your signal routing options with this neat and simple pedal. Split one signal into three, run effects in parallel, mix three signals together, set up ABY routing or set levels. Versatile.

Supplier's Notes:
The Signal Blender provides a number of parallel routing solutions through its use of a pair of send/returns, primary input and output, switching, and volume control.

Signal Blender can be used as a:
Parallel effect blender
3-to-1 mixer
1-to-3 splitter
Active ABY in either direction
Volume level setter

and more.

A courtesy 9V power outlet and phase correction switches for both Sends add further versatility to this box. Clever switching allows for latching or momentary on/off action.

The Signal Blender uses standard 9V center negative power, and has a current draw of 31 mA.

Notes: The Nektar Impact GXP49 USB MIDI controller keyboard is designed for players: Experience 49 semi-weighted keys and instant access to performance controls including a real-time repeat engine, powerful Nektarine plugin patch management and Nektar DAW Integration. GXP gives you the keys to a great performance!

GXP Keys
PLAY - Treat your fingers to a dynamic semi-weighted keyboard with velocity and aftertouch that captures all aspects of your performances.

GXP Repeat Section
REPEAT - The Repeat Engine lets you create inspiring rhythmic elements with direct and intuitive realtime access from dedicated Repeat controls.

Impact GXP Transport
DAW CONTROL - Control essential DAW functions directly from Impact GXP using the dedicated transport controls. Supports 12 DAWs.

GXP Software Bundle
PRODUCE - All you need to create is included: Licenses for Steinberg's acclaimed Cubase LE Music Production Software and Retrologue virtual synthesizer.

KEYS: JUST THE RIGHT TOUCH
At the core of GXP49 is a newly designed and carefully balanced keyboard action. Its 49 semi-weighted full-size keys with velocity and aftertouch deliver a nice, firm touch and great playability.

Impact GXP 49 Front left view
Choose from 5 different velocity curves to tailor Impact GXP's keyboard sensitivity to your personal needs. The curves cover a wide dynamic range from soft to hard touch. The default curve "normal" is optimized to deliver good control across the whole velocity range right out of the box. In addition, 3 fixed levels let you send fixed velocity values across the whole keyboard if needed.

Nektar Impact GXP49 Control

DIRECT ACCESS: THE CONTROLS YOU NEED
The streamlined no-fuss control panel is based on the successful Nektar Impact GX-series, enabling advanced DAW integration with extended transport control, track selection and volume control as well as options to open/close DAW windows and navigate songs. In addition, GXP88's user interface also has 14 assignable illuminated RGB buttons for direct MIDI program- and bank-selection.

Impact GXP is a MIDI controller as well as a DAW controller:
If you use MIDI software that's not supported by Nektar DAW Integration, you can also set up MIDI control yourself. The assignable buttons in the transport section can be configured to send out Program message or MMC (MIDI Machine Control) transport control. In addition, any of the 28 assignable MIDI buttons, the modulation wheel, keyboard aftertouch, foot switches and of course the big control knob, can be assigned to send out MIDI cc messages. The settings are stored over power cycling.

GREAT CONNECTIVITY:
MIDI, PEDALS, POWER
The GXP49 gives keyboard players all the right expression options needed for live and studio work. It offers large pitch bend & modulation wheels and connections for up to 3 optional external pedals: Connect any standard expression pedal to the first, and any standard footswitch to the second socket. And if you use an optional Y-cable adapter, the footswitch socket even supports two independent switches.

Impact GXP Pedal Connections
Impact GXP Back Panel
Impact GXP can also be used stand-alone with external MIDI gear: The rear panel includes a 5-pin MIDI out jack and an external power supply socket for powering the unit when not connected via USB.

GXP Repeat Section 2

REPEAT: GET INSPIRED
The Repeat Engine is great for creating inspiring rhythmic elements: Simply press the dedicated Repeat button, play and get inspired.

The RGB buttons now give you direct one-button access to Repeat Rates, Accent, Interval, Swing and routing aftertouch or modulation to velocity. The large Data/Tempo Encoder turns into a dedicated tempo control, unless synchronization is set to external MIDI clock.

Choose from 5 different key trigger modes to change the repeat behaviour from interesting arpeggio-style effects with human feel to hard-quantized repetitive rhythms. Repeat is a fun way to experiment and create those famous "happy accidents", that make you come up with unexpected new ideas.

GXP Repeat Engine

NEKTAR DAW INTEGRATION: GIVE YOUR MOUSE A BREAK!
Install Nektar DAW Integration and the 8 buttons right above the wheels let you take control of essential tasks in your DAW right from Impact GXP. Features cover extended transport control including goto and set locators, track navigation, volume control, launching windows and patch navigation - without ever reaching for the mouse.

Notes: Module A-171-2 is a voltage controlled slew limiter with a lot of additional features beyond a simple slew limiter. It's mostly a licensed copy of Ken Stones VCS which is in turn based on the Serge VCS.

Typical applications:

- VC Slew Limiter / VC Portamento / VC Low Pass Gate:

Cycle switch = off, no trigger signal applied to Trig socket: Voltage controlled Slew limiter or portamento generator: the signal applied to the signal input is "slewed". The slew up and down times are controlled manually by means of the Up and Down controls, the effect of the CV Up and CV Down control voltages are controlled by the CV Up and CV Down controls, in exponential mode these controls also affect the slew shape (see symbols at the CCW and CW positions of the controls).

If an audio signal is applied an short slew rates are chosen the module works as a simple VCF/VCA combo.

- A/D Envelope Generator / Pulse Delay / Subharmonic Generator:

Cycle switch = off, trigger signal applied to Trig socket, no input signal: Simple Attack/Decay envelope Generator, the rise and fall times are controlled like the slew up/down times above, including the shape of the falling/rising slope of the envelope, the exp. CV input can be used to change both attack and decay simultaneously.

At the End output a pulse appears as the end of the envelope is reached (less than about 20mV), this can be used as a pulse delay.

If a series of triggers are applied to the VCS faster than the total rise and fall times, the module will divide the incoming signal by a whole number. In the audio range the output will be the sub-harmonic series.

- VCLFO / VCO:

Cycle switch = on, no trigger signal applied to Trig socket, no input signal: Voltage controlled LFO/VCO, the rise and fall times of the waveform are controlled like the slew up/down times above, including the shape of the falling/rising slope
the exp. CV input can be used like the CV input of a VCO or VCLFO, the response is exponential but not exactly 1V/oct.

Notes: USB/MIDI to clock interface that allows for synchronizing clock-driven modules with the MIDI environment. It processes only the Clock, Start, Stop and Continue MIDI commands. It has several clock divider outputs, each one start, stop and reset outputs for controlling sequencers and also an interesting wait function. Input is either a 5-pin DIN socket or USB.

Notes: Module A-192-2 contains two independent CV/Gate-to-Midi/USB interfaces. For each of the two sub-units these inputs are available:

- Gate Input (min. +5V)
- CVN Input (defines the Midi note number), 1V/octave standard, range 0...+10V (i.e. 10 octaves)
- CVV Input (defines the velocity value assigned to the Midi note message), can be used alternatively for Midi volume (CC#7), range 0...+5V
- CVC Input (free assignable to any Midi control change number), range 0...+5V

For both sub-units a common CV Transpose input is available (1V/octave, range 0...+10V). The voltage applied to this input is added internally to CVN before the Midi note number is generated. It can be used e.g. to transpose two sequences simultaneously by one voltage.

How it works:

Whenever the rising edge of the Gate input is recognized a Midi note on message is generated. The note number corresponds to the sum of the voltages applied to the CVN input and the common CV Transpose Input that is present at the rising edge of the gate signal.

Notes: Designed with and for performing artists, Switch 4 delivers a hands-on signal switching and routing solution for your Eurorack modular synthesiser.

Quickly mute audio signals, trigger envelopes live, select modulation sources on the fly... With custom dual-action toggle switches, an intuitive interface and sturdy construction, Switch 4 will prove just as useful on stage as in the studio.

The bottom switching section includes four lever-actuated toggle switches, to make or break the signal path between the inputs and outputs. These switches feature a dual action: latched upwards, momentary downwards.

The four input signals are also sent to the top routing section, where two rotary switches allow you to select the signals to be sent to the matching outputs. Here you'll also find dual-action toggle switches, for added versatility.

Finally, all signal paths are buffered, avoiding signal cuts when shorting a jack during patching or severe loading effects when driving many inputs. The high-end components provide exceptionally low noise and distortion, so Switch 4 can reliably process audio, control voltages and gates/triggers.

Notes: By combining a mixer and four VCAs in a single module, Mix 3 manages to provide a unique combination of compact size and functionality in just 6 HP. High-end signal paths ensure extremely low noise and distortion, wide headroom and precise gain control, despite the small form factor.

Each of the three main channels has an exponential response, which is more natural for audio than linear, as it matches the human hearing. However, all signal paths are DC-coupled, so control voltage (CV) signals can be processed as well.

What truly sets Mix 3 apart from other compact mixing modules are the three CV inputs, providing voltage control over the signal levels. This even allows you to go beyond unity gain and reach up to +20 dB of amplification. Once a CV input is used, the corresponding channel knob becomes a CV attenuator.

When clipping, Mix 3 does so in a clean, symmetrical way. This yields a very pure overdriven sound, only containing odd harmonics, and allows the module to be used as a triple voltage controlled distortion.

Additional features include audio indicator LEDs, a fourth auxiliary input, voltage control over the output level and a line output jumper setting.

Notes: With sleek design and studio-quality sound, these advanced monitors are the latest development of the classic series from Mackie; and have never been better. Whether studio-recording, referential listening or gaming, the easy setup with studio-standard sound of the CR4-X are an essential competent to the optimised listening experience. Rear panel inputs include balanced 14" TRS, 1/8" Stereo, and RCA. The box includes high-quality cables to enable a quick, easy, and reliable setup. The new and improved CR4-X carries its upgraded signature sound, a fresh new look with brushed metal front panel, plug-in and play setup, and professional audio components to ensure the absolute optimised sonic performance. 50 watts of clean sound, 4" polypropylene-coated woofer, and specially designed waveguides provide unparalleled clarity at all listening levels.

Notes: Module A-174-4 modules outputs three control voltages generated by a spring-loaded X/Y cross potentiometer (so-called joy stick) and a Gate signal. The control voltages for X and Y are controlled by the X and Y position of the joystick in the usual way. The third control voltage Z is controlled by the rotation of the spring-loaded joystick knob. The Gate signal is generated by a button at the center/top of the joystick knob.

For each control voltage the non-inverted signal (X, Y, Z) as well as the inverted signal with adjustable offset (-X+XO, -Y+YO, -Z+ZO) are available. The generic joystick control voltages are bipolar, i.e. they range from typ. -5V (lowest position) via 0V (center position) to typ. +5V (highest position). The "Overlap" switches can be used to add a fixed offset voltage of typ. +5V to the non-inverting output in question so that the output voltage range changes to typ. 0...+10V (rather than -5...+5V). That's necessary if e.g. a VCA has to be controlled, which requires a pure positive control voltage range. The switches are named "overlap" because they allow the overlapping of the non-inverting CV output (X, Y, Z) with the inverting output (-X+XO, -Y+YO, -Z+ZO) for crossfading applications. With the overlap switch "on" and appropriate setting of the offset control it's possible to obtain a control voltage range of 0...+10V for the non-inverting output and +10V...0V (i.e. same range but opposite direction) for the inverting output.

The offset voltages which are added to the inverting outputs can be adjusted by means of three small potentiometers. That way different kinds of control voltage ranges are possible, e.g.
-5V ... +5V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = off, Offset = 0)
0 ... +10V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = on, Offset = max)
-5V ... +5V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = off, Offset = max)
0 ... +10V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = on, Offset = 0)
On top of this the four quadrant voltages Q1, Q2, Q3 and Q4 are available. A quadrant voltage becomes positive when the joystick is positioned in the quadrant in question.
Each CV output is equipped with an LED that displays the present voltage.

Because of the construction height of the joystick (about 7 cm) the module cannot be installed into the cases A-100P6, A-100P9, A-100PMS6, A-100PMS9 and A-100PMS12 during transportation as the depth of the case cover is not sufficient. Into the base cases A-100PB and A-100PMB as well as in all other cases without cover the module can be installed without problems.

HP : 12

Notes: Focused versatility seems an oxymoron when describing the features that led us to design the Mixwitch.

With only a pinch of mixing, inverting and controlled switching, we brew up a plethora of combinations and uses.

This is voltage processing magic!
The Mixwitch design comes from a frustration with attenuvertors (bipolar attenuators-inverters) whose off (neutral) position is difficult to retrieve, especially in live situations.

We went for a digitally-controlled analog path where polarity inversion would be at the touch of a button. So, the usefulness of attenuating/inverting can be realized by turning the pot down, swiftly pressing the inversion button and reopening the level. The zero level is where you expect it, with the pot full down.

Once we had a clean polarity control, we easily added a mute function offering the benefit of pre- adjusted pot settings ready to be activated at will.

The next step was to bring something extra, useful and creative. There are plenty of analog switches controlled by a clock; but arbitrarily selecting an input with a voltage is less known. Having both control capabilities combined with our specific mixer features creates a unique fusion: welcome to the Mixwitch !

Notes: The Yamaha MG Series of mixers feature a design and construction that will handle the standard wear and tear of the active musician. Featuring the steel chassis that is impact resistant and powder coated, this mixer will take any bumps and scratches without it getting damaged or looking old. The sleek design does not compromise any part of the finished product.

A state of the art design allows for convection cooling, meaning your power unit will not overheat your unit after continuous use. Separating the power supply from the analog circuitry inside the mixer allows for near silent background noise, allowing for a serious and high quality output sound. As well as this, the knob placement has been put above the chassis of the console, thus not damaging circuitry underneath should the device ever be dropped or mishandled.

The MG06 includes a number of features that make it stand out above the rest of compact mixers on the market. It has phantom power on the first two channel's class A preamps for any condenser microphones as well as a mono/stereo select button for instant control and flexibility. These two channels also include a 2 band EQ and a high pass filter, allowing a lot of frequency control on such a small mixer.

As well as this, two stereo channels for jack devices make up channels 3 through to 6. Outputs are aplenty on the MG06, featuring stereo jack and XLR outputs, as well as a phones output for monitoring purposes.

Notes: The Mod 11 is packed with 11 different modulation effects that range from classic to exotic plus advanced functionality all in a compact pedal. It gives you access to powerful yet intuitive "hidden" parameters accessible through its Secondary Knob Mode which let you take even greater control over its effects.

The Mod 11's modulation effects are:

1. TREM: Tremolo modulates your signal's volume. Selectable modes allow your playing envelope to control modulation rate or depth.
2. HARM: Harmonic tremolo. The signal is split into high and low frequency bands and modulated between the two. Selectable modes allow your playing envelope to control modulation rate or depth.
3. VIBR: Vibrato modulates your instrument's pitch. Selectable modes allow your playing envelope to control modulation rate or depth.
4. UNI: pays homage to the classic Univiber. Includes "Chorus" and "Vibrato" modes plus added overdrive
5. CHORUS: Warbling, doubling, chorus effect like the EHX Small Clone. Extra modes include tri-chorus and bass chorus effects
6. ROTARY: Rotary speaker cabinet simulation. Extra functionality includes overdrive plus envelope control over rotation speed
7. FLANGE: Flanging with modes for both additive and subtractive flanger. Multiple LFO shapes, including envelope follower
8. TZF: Through Zero Flanger. A flanger effect that crosses through the "zero point" of the sweep where the modulated delayed signal meets back with the dry signal. Modes for both additive and subtractive flanger, plus barber-pole flanger
9. PHASE: Choose from 4, 6, or 8 stage phaser. Multiple LFO shapes including envelope follower
10. PITCH: Modulated pitch shifter. Select your main pitch shift and modulate around it. Extra functionality includes a dry blend and stepped pitch modes
11. FILT: Modulated filter effects like those on classic analogue synths. Low Pass, High Pass and Band Pass. Multiple LFO shapes available including a Q-Tron style envelope follower

The Mod 11's Momentary Mode lets you seamlessly switch in and out of effects mode for quick accents. It also features Tap Tempo controllable via the built-in footswitch or an external one. The Mod 11 is modulation with warp drive!
11 modulation types with multiple modes for each
Intuitive "hidden" parameters accessible through its Secondary Knob Mode
Tap Tempo via the built-in footswitch or an external one
Momentary Mode to switch effects in or out
Comes with a standard EHX EHX 9.6DC200mA power supply
Compact and rugged
Power adapter included

Specifications:
Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 150mA
Year Released: 2019

Notes: Module A152 is a very useful switching and T&H module. It combines a voltage addressed 1-to-8 multiplexer and 8 fold T&H that can be used as kind of an analogue shift register too. The active in/output is displayed by a LED. The digital output of the currently addressed step outputs "high". The remaining digital outputs are low.

Instead of voltage control even clock/reset controlled addressing of the active step is possible. The rising edge of each clock signal causes an advance to the next state. The rising edge of the reset signal resets to step 1.

The sum of the voltages coming from the manual Address control and the CV input define the currently addressed step of the 3 sub-devices. If the module is controlled by clock and reset the control voltage has to remain unchanged as the CV control has priority over the clock/reset control (e.g. simply turn the CV control fully counter-clockwise and do not touch the Address control knob).

Sub-device #1 is the bidirectional 8-fold multiplexer (kind of an electronical 8-fold rotary switch). Bidirectional means that it works into both directions like a mechanical rotary switch: the common socket may work as an output that is connected to one of the 8 inputs that are e.g. connected to modulation or audio sources. But the common socket may even function as input. In this case the signal applied to the common socket is output to the currently addressed single socket. The voltage range of the in/outputs to be switched is the full A-100 voltage range -12V....+12V. All A-100 signals can be switched without any restrictions.

Sub-device #2 is the addressed 8-fold T&H. The signal at the common T&H input is connected to the addressed T&H output. As soon as a new output is addressed the last voltage is stored at the output (Track&Hold function). The T&H section of the A-152 allows the emulation of the "toggling T&H" function of the Buchla module 266 "Source of Uncertainty". Only the first two T&H outputs of the A-152 are required for this application. This unit can be used also as kind of an analogue (shift) register. The difference to a "real" analogue shift register is that the sampled output voltages are not shifted to the next output but remain allocated to the same output. But in some cases (e.g. controlling the pitch of 3 VCOs by 3 output voltages of the A-152) the result is the same.

Sub-device #3 is the digital output section. The digital output of the currently addressed turns to "high". All other digital outputs are low. The digital outputs can be used to trigger e.g. envelope generators or to control the reset input in the clocked mode to reduce the number of addressed stages.

Notes: Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock signal is available at the socket Clock Out. According to the position of the Mode switch different clock multiplying factors are assigned to the control voltage. With 0V CV no clock output is generated. This state is indicated by "all LEDs off". With increasing CV integer factors (left position of the mode switch), power of two factors (middle position) or a mix of both (right position) are obtained. Nine LEDs are used to show the currently selected multiplying factor. In addition two LEDs are used to display the incoming and outgoing clock signal.

A manual control is used to adjust the clock multiplication factor manually without the need of an external control voltage. The voltage generated by this control ("Manual") is normalled to the CV In socket. As long as no plug is inserted into the CV In socket the clock multiplication factor is adjusted by means of the manual control knob and displayed by the LEDs. For dynamic applications (like the ratcheting function described below) the manually generated CV is overwritten by the external CV which has to be fed into the CV In socket.

The module can be used for all kind of clock multiplying applications. One important example is the generation of so-called ratcheting sequences. The band Tangerine Dream is famous for this kind of sequences. A normal sequencer generates only one gate signal per step. A ratcheting sequence may have also more than one gate pulses per step. This function can be obtained by using the A-160-5: one CV output of the sequencer is used to define the number of gate pulses per step. If the control of the step in question is fully CCW the generated CV is 0V and no gate signal is generated (mute of the step). When the control of the step in question is turned clockwise one, two or more gate pulses are generated depending upon the position of the mode switch and the voltage generated by the CV at this step.

Technical note: Due to the nature of clock multiplying it takes a few input clock pulses until the clock output is stable. One has to average a few input clock pulses to generate the multiplied clock output signal. Even when the input clock frequency changes it will take a few cycles until the output clock signal is correct as the module cannot foresee the future of the clock input signal. The generated clock output signal is derived from the last few cycles of the clock input signal. Consequently the module should be driven only by a clock signal with constant or slowly changing frequency.

Notes: NuX Mighty 8BT is a compact guitar amplifier with features that enable it to be more than just a bedroom combo. Powered from the included 12V mains adaptor or optionally from 8 x AA batteries for portable use. The guitar input has clean, overdrive and distortion modes with modulation/delay effects and digital reverb. Settings can be customised for tone and effects and these are stored for each of the 3 modes. Deeper effects editing is provided by the Bluetooth link using the Might app, which is available from Google Play or App Store. A mic input is also included with a dedicated reverb send for vocals. A built-in drum machine is controlled by a simple but intuitive tap tempo/style button and rotary volume control. Aux in and headphone out complete the control panel to provide a multi-purpose jamming and recording amp for guitar players of all genres.

Notes: JTC Pro is an advanced drum & loop pedal with simplified controls, built into a dual switch stomp box pedal with 6 hours of recording capability and 256 loop track memories. Audio recording quality is 24-bit with a 44.1 kHz sample rate. A fully functional built-in drum machine section can be controlled on-the-fly by tapping tempo and punching in fills on demand using the 2 footswitches. A USB interface is included for firmware updates and can even load pre-recorded audio files to be used as backing tracks. Selectable playback modes and output options make this pedal an indispensable accompaniment tool for solo and duo performers.

Notes: Everyone loves bass, so Minirig decided to take the Subwoofer to the next step - rather than the old 30 watts of power, it now has 40 watts of power! This ultimately gives you a cleaner low that matches the new Minirig 3.

Don't just hear the bass - feel the bass:

The Subwoofer works in harmony with your Minirig or Minirig Mini to enhance the low end.

Optimised Airflow Technology:

With Minirig's custom folded horn design you get bone shaking bass, in a small package.

Take the party on the road:

Chuck this little bass bin in your rucksack and complete your Minirig soundsystem set-up.

Notes: The DIGI DJ-Stashpack XL Plus is a versatile and lightweight gig bag that and was designed to be flexible in order to accommodate a variety of equipment. It features a practical, height-adjustable Rolltop opening to easily stash a battle-mixer, records, production gear or a DJ-controller. With its durable material, solid processing and a unique design, the new DIGI DJ-Stashpack XL Plus is perhaps the most versatile gear bag in the market.

Fits: Pioneer DDJ-SR2, Pioneer DDJ-RR, Pioneer DJS-1000, Numark NS6II, Numark NV2, Numark Mixtrack Pro 3, NI Kontrol S5, NI Kontrol S4, NI Kontrol S2, Reloop Terminal Mix 4, Roland DJ-202, Pioneer DDJ-SB2, Pioneer DDJ-RB, Numark Mixtrack Pro 2, Denon MC-4000, Vestax VCI-400, Vestax VCI-380, Akai MPK-25, Akai MPC Renaissance, Rane Seventy-Two, Rane Sixty-Two, Rane Sixty-Eigth, Pioneer DJM-S9, Pioneer DJM-900 SRT/NXT, NI Kontrol Z2, Laptop up to 17", 12" Vinyl, Accessories

Notes: A four channel mixer, suitable for audio or control signals. It features regular and inverted outputs as well as an LED level meter.

Specifications:
Current needs: +12V: 21mA, -12V: 10mA
Width: 5 HP
Depth: 20mm (including power connector)
Aluminiun, heat-treated front panel.
Designed, kits prepared and completed modules assembled in Barcelona.

Notes: A compact attenuverting (attenuator-inverter) joystick controller and Gate Generator. With it, you can generate and process two control voltages using only one hand. Provided controls for CV ranges and offset adjust the boundaries of your control, this way it never gets out of the desired range, ensuring sensibility and playability even with wild performance gestures.

Specifications

Current needs: +12V: 25mA, -12V: 10mA
Width: 12 HP
Depth: 35mm (including power connector)
Aluminium, heat-treated front panel.
Designed, kits prepared and completed modules assembled in Barcelona.

Notes: The 333 is a summing and distribution module for Eurorack modular systems.

It is composed of three identical sections, the red, yellow and green, each of those featuring three inputs summing amplifier with three independently buffered outputs.

Derived directly from the CGM creative mixer series, the sum section is DC coupled, allowing the sum of control voltages as well as audio signals.

With an extremely low tolerance in both sum and output sections, it is suitable also for summing quantized voltages like the ones coming out from the quantized outputs of the SAPEL.

In case CVs or audio signals are particularly hot, the 6dB attenuator might be helpful to reduce exactly by 50% the incoming signals.

Red and yellow output are also normalled to the 1st jack socket of the yellow and green input: in this way this module can also work as a 1 to 9 buffered multiple.

Notes: Not plastic, metal. No muffled, mids-centric sound but tight low mids and present treble. No problem with feedback, spill or handling noise; instead, maximum flexibility for the voice: the e 835 is a solid choice for performers. Moderation and singing remain crystal clear and natural, even at varying distances from the capsule. Its extremely rugged construction and uncomplicated handling make the e 835 the first choice for rehearsal rooms, home recording or the stage. It has also become a top seller in its class everywhere that speech intelligibility is critical: lectures, presentations or conferences in auditoriums large and small alike.

Dynamic cardioid microphone for speech and vocals

Cuts through high on-stage levels

Clear reproduction with a high presence

Consistent sound quality (varying distances, moving off axis)

Handles high sound pressure levels

Optional silent on/off switch

Isolates handling noise, hum compensating coil

Excellent feedback rejection

Rugged metal housing

Specifications

Dimensions: O 48 x 180 mm
Connector: XLR-3
Frequency response (Microphone): 40 - 16000 Hz
Transducer principle (Microphone): dynamic
Weight: 330 g
Pick-up pattern: cardioid
Sensitivity in free field, no load (1kHz): 2,7 mV/Pa
Nominal impedance: 350 O
Min. terminating impedance: 1000 O
Weight w/o cable: 330 g

What's in the Box:
1 e 835
1 microphone clip
1 pouch

Notes: The Volca Mix is a four-channel analogue performance mixer that lets you construct a live setup combining multiple Volca units.

Volume faders are easy to control, plus crisp-sounding LO/HI CUT filters, and a master chain that radically transforms the sound. In addition to the sync function found on all Volcas, there are also DC output connectors that can supply power for up to three Volca units. Numerous functions to facilitate your on-stage Volca performances have been packed into a high-quality aluminium-panelled body, reminiscent of a high-end DJ mixer. The Volca Mix will unlock the maximum potential of the Volca series.

An analog mixer for performance:

The Volca Mix is a four-channel analog mixer with an intuitive interface and plenty of connectivity. It provides two mono inputs and one stereo input, perfect for connecting three Volca units. The jacks are mini-jacks, allowing you to make connections with just one stereo mini-cable from the headphone out of each Volca unit. The channel volumes use vertical faders that allow precise control. The gain can be boosted to adjust the mix balance, and mute buttons are also provided. Each channel is also equipped with a LO/HI CUT filter that lets you control the low and high frequency ranges with a single knob. The pristine, natural-sounding filters that you expect from analog gear give you complete control over the character of your sound.

Output and monitor capabilities for use on stage, plus stereo speakers for maximum portability:

The output section provides RCA stereo line outputs to ensure stable connection. There's a master volume with LED VU meter for adjusting the output level, as well as a headphone output that can be used simultaneously with the line output, providing a reliable monitoring environment on stage. Speakers are also built-in for excellent portability. The stereo speakers are placed at both sides of the front, and while compact, deliver SPL levels that are even greater than the built-in speakers on previous Volca units.

Powerful master chain:

The Volca Mix is equipped with master effects powered by all-analog circuitry. In addition to an expander that broadens a mono source into a stereo sound image, there's a dynamic range compressor that compresses the high-frequency range according to level changes of the low-frequency region, as well as a side chain effect that's indispensable for dance music. Use these to dynamically vary the mix, adding a professional feel to live performances with the Volca.

Connect an external effect unit for further variety:

The Volca Mix provides a stereo mini-jack send out and AUX in jack, and send level knobs for each channel. This allows you to use it with an external effect unit in a send/return connection. When used in conjunction with a unit such as the mini Kaoss pad 2S, you can also enhance your live performances using standard effects such as reverb, delay, filter, and break. The AUX in jack can also be used as a stereo input channel for a fourth Volca unit, an iOS app, or any other gadget, instrument, or device.

As the master of your Volca live setup:

The Volca Mix features an analog sync out jack that can easily be connected to many pieces of KORG gear for tempo sync, and also a play button and tempo knob to control that sync signal. By using the Volca Mix as the sync master device of your live setup, you can easily enhance your live performance, such as simultaneously playing sequences from multiple synced units, and combining mute and volume control to create performances that use your Volca units in even more ingenious ways.

Notes: Hat is a hi-hat cymbal with a wild side. Finding something unique is easy with a blend of sounds ranging from robotic to metallic. At its core are three unique sound sources made up of six oscillators, a noise generator, and a number of filters. Sizzle affects each source independently, adjusting oscillator and filter frequencies, allowing for a broad range of sounds. In addition, separate trigger inputs for open and closed allow for a complete hi-hat pattern on a single module. No matter what situation it's in, Hat provides shimmering, metallic timbres for any percussive purpose.

Notes: A producer looking for a professional, durable case solution for your 61 keyboard? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the 61 keyboard, this case is perfect for the travelling producer that needs to protect their equipment.

Specifications

Colour: Black
Weight: 3,20 kg / 7.04 lbs
Outer Dimensions (W x H x D): 107.4 x 43.4 x 15.2 cm | 42.3 x 17.1 x 6.0 inch
Inner Dimensions (W x H x D): 106.0 x 42.0 x 13.8 cm | 41.7 x 16.5 x 5.4 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior
Removable top-bottom egg crate foam prevent damage from vibrations and shocks

Extras

Convenient carry handles
Shoulder strap
Easy grip zipper puller
Expandable zipper

Fits:

NI Komplete Kontrol S61 MK2, S61 MK1, A61
Alesis QX61, Q61,
Akai MPC Key 61, Advance 61, MPK261, MPK61
Korg Pa700, Pa1000, Kross2-61, Kronos 2 61 Key/ X 61 Key, Krome EX 61, i3, EK-50/L, Pa4X-61, Pa3X, Pa900, Pa600, Pa300,
M-Audio Code 61, Oxygen 61 MK IV, Axiom 49/ 61/ Air 61,
Novation Launchkey 61, 61SL MK2, Impulse 61,
Arturia Keylab Essential 61, Keylab 61 MKII,
Nord Wave 2, Electro 6D 61, Lead A1,
Roland A-800Pro,
Yamaha MODX6, Montage 6/WH, MX61BK/BU/WH, MOFX6,
Or similar size keyboard

Notes: Pluck is a physical modelling synth voice. It uses the Karplus-Strong algorithm to create plucked string sounds. The dampening control sets the size of the string and allows for dramatic timbral shifts.

The decay control changes note length from percussive transients to infinite harp sounds. In addition, four voice polyphony provides complex layered tones; all from a single sound source.

Strum a new chord with Pluck.

Notes: ADSR is a four stage linear envelope with two expressive ranges. Each stage can be modified independently allowing for the creation of complex, multi-segment envelopes. Great for modulating filters, VCAs, and oscillators.

Notes: Arp is a gate-driven arpeggiator with a multitude of chord types and playback modes. Voltage control over both root note and chord type allow for sequencing any combination of chords in any key imaginable.

With the rate of the arpeggio and reset capability in your own hands, you're free to create dynamic rhythmic melodies from your favourite chords. Take your tonality for a ride with Arp.

Notes: Div is a 2 channel, voltage controlled clock divider and multiplier. Incoming clock signals can be multiplied or divided by a factor of 16 with a multitude of values in between.

CV inputs provide external control of the current clock rate, allowing for the creation of dynamic rhythms from a single clock signal.

Notes: Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.

Notes: The 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new go-to module for voltage controlled amplification of audio or CV.

Notes: Verb is a lush stereo reverb with a full feature set and superior audio quality. A wide range of reverb times take your sound from small room to never-ending concert hall.

CV over mix allows dynamic movement between the dry and reverberated sound, and the dampening control lets you dial in the perfect timbre for the wet signal. Whether you need a traditional reverb for an FX send or an esoteric sound design tool, Verb can take you there. Get lost in space with Verb.

Notes: Erica Pico Quant is advanced CV quantizer with some unique features - quarter tone accuracy and the web-based interface for creating user generated scales.

- 8 preset scales
- Web based interface for user generated and extra preset scales
- Microtonal quarter tone scales
- Adjustable tolerance
- Adjustable CV glide between notes
- Clocked and independent quantization

Dimensions
3 HP
35 mm deep

Current Draw
25 mA +12V
6 mA -12V

Notes: Erica Synths Pico VCO is a great, deep sounding VCO with 32 selected waves: classical, fattened with sub-oscillator, FM synth and others.

Features
2 banks, 16 waves each
VCO/LFO mode
Voltage controlled wavesurfing
Wave morphing in LFO setting
Typically you would need several rather expensive modules to generate similar sounds, besides there's an extra feature: flip a switch, and you have a versatile LFO.

With Pico Series we challenged ourselves - can we make ANY superior functionality synth module 3HP wide and affordable? Yes, we can.


Technical specification:

VCO frequency range: 30Hz - 5kHz
LFO frequency range: 0,1Hz - 20Hz
1V/Oct input signal amplitude: 0V - +10V;
Output amplitude: 10V ptp
Power consumption: +26 mA, -4 mA
Module width: 3HP
Module depth: 35 mm

Notes: Pico DSP is a small brother of the popular stereo effects processor Black Hole DSP. It contains eight algorithms, in detail four delays, two types of reverb, Leslie speaker emulation and an Overdrive/Bitcrusher. Each effect is editable in two parameters. One of them can be modulated using the CV input. Pico DSP features clear, high-resolution sound. Alongside the established standards, it is also possible to generate lots of freaky special effects.