Search dance music

Notes: The Volca Mix is a four-channel analogue performance mixer that lets you construct a live setup combining multiple Volca units.

Volume faders are easy to control, plus crisp-sounding LO/HI CUT filters, and a master chain that radically transforms the sound. In addition to the sync function found on all Volcas, there are also DC output connectors that can supply power for up to three Volca units. Numerous functions to facilitate your on-stage Volca performances have been packed into a high-quality aluminium-panelled body, reminiscent of a high-end DJ mixer. The Volca Mix will unlock the maximum potential of the Volca series.

An analog mixer for performance:

The Volca Mix is a four-channel analog mixer with an intuitive interface and plenty of connectivity. It provides two mono inputs and one stereo input, perfect for connecting three Volca units. The jacks are mini-jacks, allowing you to make connections with just one stereo mini-cable from the headphone out of each Volca unit. The channel volumes use vertical faders that allow precise control. The gain can be boosted to adjust the mix balance, and mute buttons are also provided. Each channel is also equipped with a LO/HI CUT filter that lets you control the low and high frequency ranges with a single knob. The pristine, natural-sounding filters that you expect from analog gear give you complete control over the character of your sound.

Output and monitor capabilities for use on stage, plus stereo speakers for maximum portability:

The output section provides RCA stereo line outputs to ensure stable connection. There's a master volume with LED VU meter for adjusting the output level, as well as a headphone output that can be used simultaneously with the line output, providing a reliable monitoring environment on stage. Speakers are also built-in for excellent portability. The stereo speakers are placed at both sides of the front, and while compact, deliver SPL levels that are even greater than the built-in speakers on previous Volca units.

Powerful master chain:

The Volca Mix is equipped with master effects powered by all-analog circuitry. In addition to an expander that broadens a mono source into a stereo sound image, there's a dynamic range compressor that compresses the high-frequency range according to level changes of the low-frequency region, as well as a side chain effect that's indispensable for dance music. Use these to dynamically vary the mix, adding a professional feel to live performances with the Volca.

Connect an external effect unit for further variety:

The Volca Mix provides a stereo mini-jack send out and AUX in jack, and send level knobs for each channel. This allows you to use it with an external effect unit in a send/return connection. When used in conjunction with a unit such as the mini Kaoss pad 2S, you can also enhance your live performances using standard effects such as reverb, delay, filter, and break. The AUX in jack can also be used as a stereo input channel for a fourth Volca unit, an iOS app, or any other gadget, instrument, or device.

As the master of your Volca live setup:

The Volca Mix features an analog sync out jack that can easily be connected to many pieces of KORG gear for tempo sync, and also a play button and tempo knob to control that sync signal. By using the Volca Mix as the sync master device of your live setup, you can easily enhance your live performance, such as simultaneously playing sequences from multiple synced units, and combining mute and volume control to create performances that use your Volca units in even more ingenious ways.

Notes: Module A-192-2 contains two independent CV/Gate-to-Midi/USB interfaces. For each of the two sub-units these inputs are available:

- Gate Input (min. +5V)
- CVN Input (defines the Midi note number), 1V/octave standard, range 0...+10V (i.e. 10 octaves)
- CVV Input (defines the velocity value assigned to the Midi note message), can be used alternatively for Midi volume (CC#7), range 0...+5V
- CVC Input (free assignable to any Midi control change number), range 0...+5V

For both sub-units a common CV Transpose input is available (1V/octave, range 0...+10V). The voltage applied to this input is added internally to CVN before the Midi note number is generated. It can be used e.g. to transpose two sequences simultaneously by one voltage.

How it works:

Whenever the rising edge of the Gate input is recognized a Midi note on message is generated. The note number corresponds to the sum of the voltages applied to the CVN input and the common CV Transpose Input that is present at the rising edge of the gate signal.

Notes: NuX Reissue Series Plexi Crunch Pedal

Reissue series amp simulator pedal for guitar or bass. The Plexi Crunch provides a high gain distortion based on a hot-rodded British valve amplifier for classic crunch and heavy power chords. All analog circuitry ensures a pure signal path and both Tone and Presence controls closely mimic the same tone sculpting controls found on these classic amplifiers. Classic stack sounds for rock and metal guitar styles.

Pure analog amplifier simulation
True bypass hardware switching
Preamp, Master, Tone & Presence controls

The box for this item contains :

Reissue series plexi crunch pedal
9V PP3 battery

Specifications:

Battery: 9V PP3 (supplied)
Power supply: Optional 9Vdc 300mA regulated (not supplied)
Controls: Preamp, Master, Tone, Presence & foot switch
Input impedance: 1M Ohms
Output impedance: 10k Ohms
Dimensions: 121 x 77 x 48mm
Weight: 230g

Notes: "We meat again!" Proudly presenting the DOD Meatbox (2015).

Answering the call of low frequency freaks everywhere, the DOD Meatbox (2015) is an updated take on the cult favorite Meatbox from the '90s. As a bass subharmonic synthesizer and low-end enhancer, the Meatbox can produce a range of sounds from a slight thickening to a full-on, low-end assault! Use the Meatbox on bass guitars, extended-range guitars, synths, even drum machines and push all the air out of any room. If you're looking for a new way to move your audience, look no further.

More than just a low frequency boost, the DOD Meatbox (2015) can also cut frequencies for tone sculpting as an interactive EQ and even produce distortion depending on where the output level is set.

The DOD Meatbox (2015) offers independent Octave, Output Level, Subharmonic and Low Frequency controls. True bypass allows your tone to remain pristine even when the DOD Meatbox is off. This is a big difference from the original, which would colour your bypassed tone.

The modern 9V DC power supply input makes the pedal more pedalboard friendly.

Notes: Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)

Notes: Deluxe version of the impressive iRig Pro Quattro features the same high-quality portable interface with the added bonus of a full complement of accessories, including mics and travel case.

Supplier's Notes:
***Note: This version of the iRig Pro Quattro I/O comes with 2 x Mic XY stereo microphones, foam windscreen, and a carry case. ***

Go pro all the way

For a little more, you get a lot with the iRig Pro Quattro I/O Deluxe edition. The value of the iRig XY stereo mic capsules alone is worth the upgrade. In addition to the pair of mics you'll get the optional power supply, which you can also use to keep your iOS device charged during extended sessions. Plus you'll get a custom carrying case to protect and transport your Quattro I/O and XY mics wherever your field work takes you.

Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Dimensions

Size: 160mm/6.29" x 90mm/3.54" x 40mm/1.57"
Weight: 340g/11.99oz (without batteries)
Cable length: 60cm/23.62"

Box contents

iRig Pro Quattro I/O
1/4" thread adapter
4x AA Batteries (alkaline)
iOS Lightning to mini-DIN cable
USB-A to mini-DIN cable
2.5mm jack to MIDI female adapter
2 iRig MIC XY stereo microphones
Windscreen
9V PSU
Travel case

Notes: Choose Your Weapon: Building on the success of the original, the feature-packed MPD2 Series gives you amazing creative musical ammo with Thick Fat backlit MPC pads, improved controls and new bundled software.

The MPD2 Series is a product of over six years of detailed customer research and user feedback. Akai turned it into the most capable and user-friendly line of pad controllers they've developed to date.

The MPD232 is a MIDI-over-USB pad controller perfect for producers, programmers, musicians and DJs alike. Its intuitive blend of MPC controls and technologies mesh with easy USB connectivity to bring the feel of classic beat making into the world of computer music production.

New, ultra sensitive Thick Fat MPC pads have been added, creating an amazingly responsive user experience. The MPD232 has an expanded control set featuring eight knobs, eight faders, eight buttons arranged in three banks for 72 total controls. This will enable you to maximize your sound and give you increased control over effects.

The MPD232 also boasts an all-new 64-channel, 32-step performance sequencer, which the MPD32 did not have. MIDI information is sent over its plug-and-play USB interface for use on Mac or PC, eliminating the need to install any drivers.

Along with the improved functionality we've added iOS compatibility using the Camera Connection Kit (sold separately) and included over $400 of free software. Titles include: Akai Pro MPC Essentials, Big Bang Drums and Big Bang Cinema from Sonivox, Ableton Live Lite, and Software Preset Editor.

The aforementioned Software Preset Editor allows you to enjoy intuitive control editing right from the front panel of the MPD232.

The MPD2 Series marks an important evolution of the pad controller. Many years of research and customer feedback has led directly to some of the most capable pad controllers Akai have ever developed. These MPDs are the perfect bridge between your creativity and your computer-based studio.

Notes: ProFX10v3+ is a compact analogue mixer and USB-C audio interface with features from a studio recording console. Equipped with essentials including one-knob compression, EQ, Hi-Z switches and 100 Hz low-cut filters, it's the perfect centrepiece for your studio.

Mackie ProFXv3+ Series is a professional analogue mixer and USB-C audio interface with powerful enhancements for studio-quality recordings and live streams. Capture your performance with Onyx preamps and channel EQ, add computer audio via loopback, bring in calls via Bluetoothr and enhance your sound with upgraded GigFX+ effects on a colour LCD screen.

With up to 60 dB of gain and ultra-low noise, ProFXv3+ series mixers allow you to sound better than ever. Record podcasts, stream gameplay or produce the next hit-all with ultra-clean, transparent audio. The award-winning Onyx Mic Preamps deliver analogue warmth so you sound great, no matter what you do.

Enhance your sound using high-resolution GigFX+ effects, with 12 presets you can edit and save on the fly via the full-size LCD screen. Combining the warmth of an analogue recording console with precise digital effects, ProFXxv3+ is an ideal mixer for home studios and live events alike.

Capture your stream or performance at pristine 24-bit / 192 kHz quality with a built-in 2x4 USB-C audio interface, complete with three recording modes: Standard for the full mix with effects, Loopback to include computer audio with mixer signal for streaming, and Interface to record channel 1-2 without effects processing.

Use the dedicated Bluetooth channel to send and receive audio from devices like smartphones and tablets. For podcasters, it's an effortless way to bring in phone calls. For musicians and performers, it's the easiest option for streaming outside music and backing tracks.

Features:

4 Onyx mic pres with up to 60 dB of gain and ultra-low noise performance
High-resolution GigFX+ effects engine
Full-colour LCD display for editing and saving effects presets
24-Bit / 192 kHz 2x4 USB-C audio interface
Three recording modes: Standard, Loopback and Interface
Bi-directional Bluetooth for music playback and caller integration
3-band EQ on all channels
One-knob compression on channels 1 and 2
Hi-Z switches allow direct connection of instruments
100 Hz low-cut filter and 48V phantom power on all mic channels
Stereo 1/8" input on channel 9/10
Headphone output with separate level and blend control
Easily blend between monitoring your computer output and a latency-free feed from the mixer
Waveform OEM recording software Included
Legendary Built-Like-A-Tank design
Solid steel chassis
Tough ABS side protection

Line inputs: 10
Mic inputs: 4
Aux sends: N/A
Subgroups: 2
Compressors: 4
Effects: GigFX+
USB I/O: 2x4
USB Type: C
Recording modes: Yes
Bluetooth w/MixMinus: Yes

Notes: Next-level version of KMA's excellent Tyler frequency splitter pedal. Variable 12dB/oct high- and low-pass filters, isolated effect loop sends, wet/dry mix control and relay-based soft switching.

Supplier's Notes:
Expanding on the already rich feature-set of KMA Machines' popular Tyler pedal, the upgraded Tyler Deluxe is the ultimate Swiss Army Knife for creative musicians to use on their pedalboards, live or in the studio. Ideal for Bass, Guitar or any other amplified instrument, it offers a host of new features and functions and is perfect for developing new sounds with an existing collection of pedals or splitting signals into multiple amplifiers/differing signal chains. All of this helping to lead musicians' creativity down new inspiring parallel paths.

Do you remember the sounds coming from the woods, as a rough and towering man was wielding his frequency-splitting axe? Driven by nature's most primordial force, that man then dropped his simple axe, picked up his power saw and evolved into something more. Something bigger, stronger and more versatile. Standing tall is Tyler Deluxe - the ultimate frequency-selective signal-splitting tool, ideal for developing new sounds and leading your creativity down new inspiring parallel paths.

KMA Machines' Tyler (active and variable two channel crossover/signal splitter) has successfully found its place on many bass and guitar players' boards around the world, helping them refine and define their tone. However never to stand still, the team at KMA Machines decided to step up the game and create a more advanced, versatile and flexible solution, based on the great feedback from users.

The heart of the pedal is still the same essential filter sections, which splits your signal into different loops with HIGH PASS and LOW PASS paths (both filters have a 12 dB/oct. roll-off with a variable cut-off frequency from 20 Hz to 3 kHz). The rest of the vital tonal organs have had a thorough upgrade, which has resulted in an improved noise floor too. So, let's dive into everything that makes this pedal Deluxe.

Since the original Tyler was also used as an advanced AB/Y box by many, it was found that ground loops could occur - no more with Tyler Deluxe ! Both SENDs are now transformer coupled (with TRIAD Magnetics) to give you a nice and warm saturation, while avoiding ground-loops (internal slide-switched ground-lift). To be prepared for almost every situation and every pedal, both loops also got their own phase inversion switch (+/-) to get rid of potential unwanted phase cancellation.

The next new must-have feature is there to ensure the transparency of your setup; the good old CLEAN blend has been added

So far so good, but the deluxe delights don't stop here! A master phase-switch ensures a fixed and reliable interaction with your set filter frequency in every situation, no matter if you either have a loop engaged or not. But wait, for all of you who wants to follow Tyler's evolution, another claimed feature has been added. The LP-CUT and HP-CUT switches will now mute your loops when bypassed, which will give you tons of new options to be creative, by only using the engaged loops without having clean artefacts pass through when disengaging one of the loops.

Modern times brings modern needs, so Tyler Deluxe is now equipped with relay-based soft-switches, an internal step-up to increase the headroom for hotter input signals and low-noise op-amps to improve the overall sound-quality and usability.

Some fun examples of use: Bass players want to retain their low end while using their favourite fuzz or dirt pedal. Insert your dirt box in the high-pass FX-Loop and adjust the cut-off frequency of the High and Low Pass to your needs. Dial in your preferred ratio of those Low and High Pass signals, engage the HP LOOP footswitch and you will never turn off Tyler Deluxe again! You can also insert different modulation pedals, for example insert a lush phaser for the lows and a nice shimmering delay for the highs and Tyler Deluxe will make it sound like two different guitars are playing at once. Mix up your modulation pedals with any of your dirt pedals, for a very pronounced and punchy sound all coming from one amp.

If there ever was a Swiss army knife for your tone, then Tyler Deluxe must surely be it. So, fire up your frequency saw and start defining your own unique sonic path.

Notes: From trickling hi-hats to thunderous kicks. The Befaco Percall 4-Channel VCA/Delay Envelope Module is designed to take care of all percussive aspects of your Eurorack rig. You'll be able to create a whole host of percussion thanks to the 4 VCAs, volume control and decay options. By using the trigger you'll be free to open the VCA whilst the volume knob helps determine the level of the percussive sound you've sculpted. Take your tones to the next level thanks to the inclusion of an output on the envelope. You can apply this to the pitch of the oscillator to achieve a fat kick drum which offers excellent low frequency energy. The Percall 4-channel module is the ultimate addition to your Eurorack.

Notes: USB/MIDI to clock interface that allows for synchronizing clock-driven modules with the MIDI environment. It processes only the Clock, Start, Stop and Continue MIDI commands. It has several clock divider outputs, each one start, stop and reset outputs for controlling sequencers and also an interesting wait function. Input is either a 5-pin DIN socket or USB.

Notes: The NT5 matched pairs are a masterpiece of small-diaphragm cardioid-condenser microphone design.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comes supplied in a custom carry case with windshields and mounts.

NT5 - Matched Pair Box Contains :

As of 2022, the updated packaging is made from engineered cardboard instead of foam or plastic blister, making it more environmentally friendly, and they all share a unified look to further enhance brand consistency.

RODE have also made a change to the box contents removing the hard cases and including a zip case instead. This has meant that the new dimensions of the packaging are significantly smaller than the original packaging.

2 x NT5
2 x RM5 (mic clip)
2 x WS5 (windshield)
1 x ZP1 (zip pouch)

Notes: The A-100LC1v is a smaller version of the A-100LC3 with 48 HP of space. It is made out of raw wood, a black coating gives the Eurorack frame a vintage look. The built-in power supply, type A-100SSB, delivers up to 380 mA at +12 V and -12 V as well as 100 mA at +5 V.

The A-100LC1v comes equipped with one 48 HP measuring row for 3U modules. Its power supply features eight connectors for oscillators, filters and so forth. The case is connected to the grid via an IEC power socket.

Notes: Updated version of Source Audio's excellent Nemesis delay features an all-analogue dry signal path, meaning your original signal passes through unadulterated. Same versatile delay options, including patches based on vintage and modern hardware.

Supplier's Notes:
The NEMESIS Delay ADT is an updated version of Source Audio's award-winning NEMESIS Delay. It has all the tones and features that made the original NEMESIS so popular and includes some key updates including an analogue dry through signal path.

Analogue dry through means that the guitar's dry signal maintains a 100% pure and unprocessed analogue signal adding only the delay you choose. Other new features include enhanced MIDI functionality, 100 factory loaded presets, and an updated collection of delay effects easily accessible with the pedal's intuitive interface. The updated NEMESIS is also compatible with over 1,000 Neuro user presets created for the original NEMESIS Delay.

Additional NEMESIS Delay ADT features include stereo ins & outs, full MIDI functionality with 5-pin MIDI DIN and through ports, tap tempo with 15 different beat divisions, 8 onboard presets (128 with MIDI), bypass trails, external expression control, and a delay "freeze" function engaged by holding down the tap tempo footswitch.

NEMESIS Delay ADT captures the full spectrum of delay effects, starting with a comprehensive collection of meticulously crafted vintage delay tones. The Source Audio engineering team spent over a year studying numerous iconic and sought-after tape and bucket brigade delay units with a staunch dedication to identifying their every nuance and idiosyncrasy. At the opposite side of the spectrum, you'll find an advanced collection of sophisticated and specialized delay effects.

In addition to the basic 12 delay engines available on the front panel, the NEMESIS Delay ADT also features 12 extended delay engines for a total of 24 engines in all. These additional "back 12" effect engines offer a variety of tonal options and can be selected using the Neuro App or via MIDI. Any of these effects can be used to overwrite the default effect engines on the effect dial or can be stored as user presets.

Job one in the development of the NEMESIS Delay ADTwas to create a flexible, easy-to-use, and great sounding delay pedal. Out of the box, that's exactly what it is - plug in, select from the twelve onboard delay engines and make beautiful music... simple. But there is much more here than meets the eye - the truly "Big Idea" behind our One Series pedals was to give musicians a second, far deeper, set of options and editing tools with which to craft the perfect tone. The Neuro Desktop Editor and Neuro Mobile App are free downloads for iOS, Android, Mac, and Windows.

Additional parameters found in Neuro include Diffusion, Distortion, Wow and Flutter, Advanced Filtering, Sample Rate Reduction,12 different Tap Tempo Beat Divisions, Polyphonic Pitch Shifting and much more. Neuro's complete collection of delay effects includes "Sweeper" (a modulated filter delay), "Degrade" (with sample rate reduction), "Sequenced Filters," "Warped Record", "Chorus," and more.

Customized presets can be published to the cloud and made accessible to the entire Neuro Community. To date there are well over 8K published presets available for One Series pedals in Neuro. After editing your preset, burn it directly to the pedal and access it easily without reconnecting the Neuro App.

Notes: Extend your Large XTS Stand's functionality with a Flex Tray: the perfect solution for using multiple pieces of gear on a single desktop stand!

The XTS Flex Tray is available in two lengths: 13.3" or 17.7". It attaches easily and securely to your Large XTS Stand, with no tools required.

The 13.3" Flex Tray can hold 2-3 small pedals or synths. The 17.7" Flex Tray can fit an Elektron Digitakt and Digitone, two SP-404s, 2 large pedals like a Strymon BigSky or Timeline, or up to 6 compact pedals like Chase Bliss.

The XTS Flex Tray is compatible with the Large XTS Stand. For other XTS Stand size options, check out our complete XTS Desktop Stand System.

Flex Tray for Large XTS Stand
Xtend your XTS Stand's functionality
Use multiple pieces of gear on a single desktop stand
2 sizes available for ultimate versatility
Crafted from 100% solid sheet metal

Specs

13.3" Flex Tray

Length: 13.3"
Width: 8.3"
Weight: 2.9 lbs
Fits 2-3 small pedals or synths

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Wireless PRO is the ultimate wireless microphone, packed full of powerful features that offer incredible flexibility for recording pristine audio for your content. Never lose a take with 32-bit float on-board recording, keep all your video and audio flawlessly synchronised with timecode, and capture incredible-sounding content effortlessly with intelligent GainAssist technology. The Wireless PRO delivers everything you could possibly want from a compact wireless microphone system, and much more.

State-of-the-art Wireless Audio

RODE pioneered the ultra-compact wireless microphone category with the original Wireless GO and this legacy carries on with Wireless PRO. Utilising state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, it delivers crystal-clear, incredibly stable audio with a range of up to 260m. Wireless audio you can rely on in almost any recording application.

Never Lose a Recording

There's nothing worse than pulling your audio into your editing software and realising your recording clipped and can't be used. With the Wireless PRO, this is a thing of the past. 32-bit float on-board recording means your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too loud or too quiet. Never worry about setting your gain perfectly again. Gamechanger.

Audio and Video, Perfectly in Sync

With the Wireless PRO's timecode capability, you can perfectly synchronise your audio and video with ease - no need for complex and expensive external timecode systems.

Pristine Audio in Any Situation

In addition to its 32-bit float on-board recording, the Wireless PRO offers a plethora of features that promise pristine audio in any situation. Ensure your audio is smooth and balanced with intelligent GainAssist technology. Precisely match your mic to your camera with flexible gain controls and tailored presets. Add an extra layer of protection with the safety channel. Perfect recordings, every time.

The Ultimate Pro Recording Kit
The Wireless PRO comes with everything you need to get set up and recording wireless audio right out of the box. Included are two professional Lavalier II microphones that are perfect for recording on-screen talent, as well as furry windshields for outdoor use, a pair of MagClip GO to attach your transmitters anywhere, a smart charging case and a handy accessory pack to store your lavs, cables and clips.

Connect to All Your Devices

Thanks to its analogue (3.5mm) and digital (USB-C) outputs, the Wireless PRO is universally compatible with cameras and other audio devices, both iOS and Android smartphones and tablets, and Windows and Mac computers.

Easy Configuration and Control

Check your audio levels at a glance with the bright LCD display and configure settings on the fly with dedicated controls for everything from gain adjustment to triggering recordings. Customise the system to your needs anywhere using your computer or smartphone with the RODE Central app. Complete control over your setup, so you can be ready for any recording situation.

Monitor and Record

Monitor your audio in the field with the Wireless PRO's high-power headphone output, complete with on-board level control, or connect a headset or narrator microphone such as a lavalier to capture a third audio track. Ultimate versatility.
Specifications Acoustic & Electrical (Wireless PRO)

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Maximum SPL: 123.5 dB SPL
Equivalent Noise (A-Weighted): 22 dBA
Signal-to-noise Ratio: 72 dB
Analogue Inputs: 3.5mm locking TRS (TX)
Analogue Outputs: 3.5m TRRS (RX)
Transmission Range: 260m (line of sight)
Digital Connectivity: USB-C
Operating System Requirements: macOS 10.15 above, Windows 10 and above, iOS 14 and above, Android 11 and above
Power Requirements: In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time: Up to 7 hours

Acoustic & Electrical (Charge Case)
Mechanical
Battery Capacity: 4200 mAH
Power Requirements: 5V/3A via USB-C
Charging Time: 2.5 hours
Charge Current: 2A (maximum)
Total charges (TXs and RX): 2 complete charges
Connection Type: USB-C (SuperSpeed USB-C cable required for optimal data transfer speeds)

Mechanical
Weight (grams)
TX: 35RX: 36
Charge Case: 177
Total: 284

Dimensions (millimetres)
TX: 46.5 (W) x 44 (L) x 20 (H)
Charge Case: 101 (W) x 82 (L) x 70 (D)

What's in the Box:

Wireless PRO TX
2 x Transmitter
30cm USB-C Lightning Cable
1 x SC21
30cm USB-C to USB-C Cable
1 x SC22
Premium Lavalier Microphone
2 x Lavalier II
Magnetic Clip for Wireless GO
2 x MagClip GO
Furry for the Wireless Go II
3 x Furry
Wireless PRO Receiver
1 x Receiver
Wireless PRO Charge Case
1 x Charge Case (PRO)
Wireless PRO Accessory Case
1 x Accessory Case
SC34 USB-C to C SuperSpeed Cable
1 x SC34
3.5mm TRS Patch Cable
1 x SC2

Notes: Redefine the beat: your control, your performance.

The MPS-10 is a game-changer in drum and percussion technology. Built with both durability and precision in mind, it's designed to meet the evolving needs of today's drummers and percussion performers.

Six versatile pads offer a rich array of sounds, while 4 ground-breaking CC pads give real-time control as never before. Expand the possibilities further with an intuitive sampler and powerful 4-track looper, alongside inputs for external triggers and footswitches.

MPS-10

6 instrument pads
4 CC pads
4-track looper
Intuitive sampler
Huge library of instruments and samples
Powerful effects
Smooth Sound Transition
External triggering capabilities

Take your performance on the road

Created to be an indispensable companion for drummers and percussionists, the MPS-10 is a powerful blend of sonic capability and performance control. It features a deep library of 2,350 assignable instruments and more than 3000 high-quality samples that range from dynamically expressive instrument tones with captivatingly nuanced variations based on your strike's intensity, to the essential electric instrument sounds that drive modern drumming today.

Powerful effects

MPS-10 has an incredible default master reverb and filter, further enhanced with two insert and one master effect slot. Effects can be easily toggled for each pad, making intricate tonal changes a breeze.

Seamless transitions

Experience uninterrupted creativity with the Smooth Sound Transition (SST), ensuring flawless kit transitions after striking a cymbal or repeating a sample. When you need guaranteed silence, a simple press of the "sound off" button has you covered.

Looping unleashed

MPS-10 features an incredibly flexible and powerful 4-track looper. With dedicated looper effects, crafting intricate looping phrases is easy. Synchronized settings ensure flawless playback across tracks, and each track can be exported as an audio file!

The CC pad revolution

At the top of the MPS-10 sits four CC pads. These give you a level of control never before seen on an instrument like this. Able to detect the strike position with incredible precision, these pads give you powerful control over parameters such as filtering, EDM-inspired drum rolls, and real-time tonal transformations through versatile MFX functions.

Unlock your creativity

The sampler function within MPS-10 liberates your creativity, allowing effortless importing of user samples. Seamlessly import sounds from a USB flash drive and assign them to any pad, and even replace portions of preset kits to build your own personal sound set.

See your sound

Take centre stage with confidence thanks to the vivid full-colour display - easy to read even under the brightest lights. Tailor the saturation to your preference, and with three-color LEDs illuminating each pad, MPS-10 ensures seamless performance on even the dimmest stages.

Craft your kit

Crafting your signature kit is a breeze with the MPS-10 Editor, a user-friendly web app. Simply connect the MPS-10 to your computer via USB, and dive into a realm of endless creative possibilities as you shape your own unique kits.

External triggering
Dual trigger-in terminals accommodate up to four triggers and pads via a Y shaped cable, giving a total of 15 sounds within one kit. MPS-10 even features a dedicated bass drum trigger (pad 11).

Built to perform

Developed by the team behind the WaveDrum and Pearl e/MERGE, the MPS-10 provides the ultimate drum pad experience. In pursuit of a combination of durability and performance, a high-quality rubber material was perfected through extensive consultation and trialling with the most demanding professional players. The perfect balance of feel and sensitivity enables drummers and percussionists to express themselves naturally. The pad layout is designed to ensure the ideal striking position when integrated into a drum kit, resulting in comfortable playing and superior strike detection.

Specifications

Kits

200 (including user KITs)
INST 2358
SAMPLE 3000

Effects: 77
Max Polyphony: 48

Audio outputs: Headphones (6.3mm TRS); MAIN OUT L, MAIN OUT R, SUB OUT 1, SUB OUT 2
Audio inputs: LINE IN L/R, MIC IN (6.3 mm TRS phone jacks)

Control inputs
CH A/B, C/D (6.3 mm stereo phone jacks)
Foot pedals: 1, 2 6.3 mm TRS phone jacks)
Expression pedal (6.3 mm TRS phone jack)

MIDI/USB
MIDI Out
USB-A (Type-A) USB standard ver. 2.0, Hi-Speed compliant (480 Mbps)
USB-B (Type-B) USB standard ver. 2.0, Hi-Speed compliant (480 Mbps)

Internal memory: 32gb (inc. preset data)

Audio playback WAV, 44.1 kHz/48 kHz, 16-bit (up to 60 minutes long)
AIFF, 44.1 kHz/48 kHz, 16-bit (up to 60 minutes long)

Display: 320 x 240 backlist colour LCD
Operating temp: 0 to +40oC
Power supply: AC adapter (DC 9V)
Dimensions: 424 x 264 x 75mm
Weight: 2.3kg
Included items: AC adapter

Notes: *** This version of UTILITIES comes with with screws instead of pins. Also designed for connecting alligator clips, just more affordable. ***

UTILITIES contains a set of simple auxiliary modules to expand the functionality of the PULSAR-23 drum machine. UTILITIES modules can also be used with any gear that works with CV signals (Eurorack, semi-modular synthesizers, etc.).

The modules included in UTILITIES can be divided into two groups:
1) Passive elements such as switches, resistors, capacitors.
2) Various types of amplifiers and waveshapers, linear, non-linear, controlled and uncontrolled.
Passive elements are designed to expand the possibilities of switching and controlling the PULSAR.

Linear amplifiers are needed when you need to feed a signal from a device operating in a lower voltage format to the PULSAR inputs. For example, it can be a step sequencer with an output voltage of 5 volts, while the PULSAR needs 10 volts to fully trigger the drum modules. Or it could be the output of a cassette tape recorder, which has an output of 1 volt, while for normal operation the PULSAR needs an input level of an audio signal of 5 volts. Non-linear and controlled amplifiers and waveshapers are designed to control the signal level, while simultaneously changing its spectrum, distorting its shape and adding harmonics. The circuitry of these amplifiers is very simple and based on the early developments of the transistor era, with its inherent beauty and grace.

UTILITIES connectors are made in the PULSAR-23 format on pins designed to connect the alligator clips. There are also adapters for 3.5mm Eurorack mini-jacks.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

There are also adapters for 3.5mm Eurorack mini-jacks. The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

Power supply: DC +12 v 5.5 x 2.1 mm center plus
Current consumption: 50 ma max
Dimensions: 288 x 193 x 40 mm
Weight: 0.75 kg

Notes: The Minicase by Flame is made of bamboo wood and is offered in a limited edition.

Modules up to a depth of 5.3 cm can be installed in the case. For example, the Fire Drum Synth Module and the Takt Rhythm Sequencer.

Technical data:

Module width: 56TE
Installation depth: 5,3cm
Outer dimensions: 30x15x6cm
6x 16pin Doepfer connectors for modules
Plug-in power supply with DIN connector:
110-230VAC 28W, with +5V/2,5A +12V/1A -12V/0,3

HP : 56

Notes: myVolts Halo Mult is a mini jack duplicator with Halo LEDs indicating power and polarity.

myVolts have embedded the Halo LEDs into a port duplicator, which means you can easily share a signal over multiple outputs, but still have light visualisation on them.

There have been various cable stacking solutions made available for Eurorack, here is the first one with LED indication, while also allowing you the freedom to introduce your own patch cable when you need them.

It was best to keep the design short and squat, allowing for greater stability when stacked, while also reducing pressure on patch ports.

Connector 1: 3.5mm jack, male, mono, straight
Connector 2: 2 x 3.5mm jack, female, mono
LED signal indicator: Red and Green
Colour: Black

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Latest incarnation of Buchla's legendary modular synth. Massively creative with incredible sound and history stretching all the way back to the 1960s.

Supplier notes:
The evolution of the legendary modular analog synthesizer by Don Buchla. The Buchla Easel Command is the newly updated 208C in a standalone desktop form with MIDI and CV control.

Buchla's own Joel Davel led the charge to create a new version of the legendary Music Easel instrument with more modular flexibility and independence, while also providing the means to easily interface with more devices, such as the various DAWs like Ableton and MIDI controllers, including the very expressive Sensel Morph. It's still fully analog in its default configuration and provides the unique and exquisite Buchla experience with greater functionality at a lower cost.

Notes: Simple, straightforward and effective. The XVI-M offers 16 high-resolution faders, 16 programmable buttons and MIDI output over USB or TRS. Solidly built metal enclosure promises durability.

Supplier's Notes:
XVI-M MIDI Controller, 16 Faders, 16 programmable buttons, 14bit resolution

XVI-M Desktop is a 16 channel desktop MIDI control surface.

Features:

Long throw LED 60mm faders
USB MIDI, MIDI TRS#1 and MIDI TRS#2 outputs
USB Powered (USB C, Cable included). Stand alone adapter available but NOT included
14bit (MIDI Pitchbend) resolution faders. Can be set to any 7 bit CC or NRPN/RPN
Online parameter editor: https://misw.us/editor
Fader output can be routed to USB MIDI, TRS MIDI A or TRS B
3 color programmable button can be momentary, 1 state toggle, 2 state toggle, or 3 state toggle with each state sending a MIDI msg
Durable metal case
Includes:

XVI-M Control Surface
USB C to USB A cable (2m)
1.5m TRS A to MIDI DIN cable

Notes: ***B-STOCK: Box opened, product in perfect working order***


Erica Synths Modulator is an advanced modulation and pitched noise source with focus on rhythmic (but not limited to) compositions in mind. It features two identical syncable to the BPM LFOs/noise sources with selectable morphing waveshapes. LFO frequency can be manually adjustable, as well as they provide frequency divisions and multiplication in Sync mode. Each LFO has two outputs- main one and secondary one with adjustable phase, so you can create evolving modulations. Furthermore, LFOs can be linked to work at the same frequency and the first LFO has built in VCA to control output signal amplitude.

Notes: ***B-STOCK: Box opened, product in perfect working order***


ADSR is a four stage linear envelope with two expressive ranges. Each stage can be modified independently allowing for the creation of complex, multi-segment envelopes. Great for modulating filters, VCAs, and oscillators.

Notes: High-quality compact studio monitors for the uncompromising creator

HS Series speakers have become the standard in studio monitors, trusted for many years by the world's top audio engineers, producers, and artists. Now Yamaha has redefined their essence in a compact housing. The HS3 and HS4 are powerful tools to help create a wide range of audio content-from music production to video editing-that meets the expectations of creators who have limited space and need to keep the volume down but do not want to compromise on monitoring quality.

Sound that is always true to the original

The HS3 and HS4 continue the design philosophy and know-how of previous Yamaha studio monitors. No effort has been spared in the pursuit of the optimal product, and the resulting speakers comprise carefully selecting parts such as a high-performance class-D amp, a highly resilient MDF cabinet, and woofers and soft dome tweeters that deliver a sound that is faithful to the source despite their small size. They also feature proprietary "Twisted Flare Port" technology that reduces air turbulence noise in the bass reflex port, providing clear and accurate bass. That's the secret to why the HS3 and HS4 deliver outstanding resolution, sound image, and depth, with a flat response across all bandwidths without any colouring of the original sound.

Optimal sound tailored to your environment

The sound produced by speakers is sometimes affected by the surrounding environment.

The rear panels of the HS3 and HS4 are equipped with ROOM CONTROL and HIGH TRIM functions that allow you to make adjustments to achieve the ideal sound for any environment, such as reducing the unneeded, exaggerated low-end that can often occur when speakers are placed next to walls.

Inputs and controls to fit any use case

The rear panel of the HS3 and HS4 is equipped with combination XLR/TRS phone, RCA, and stereo mini connectors, allowing you to connect to a wide range of professional and consumer equipment such as computers, audio interfaces, audio mixers, and electric instruments. The most commonly used features-power button, volume knob, and headphone connector-are located in the front for easy access.

Compact and portable

The compact size of the HS3 and HS4 was made possible thanks to the highly efficient class-D amp. Using one amp for two speakers has enabled us to both reduce the weight of the speakers and simplify the cable connections. They take up little space even in a small bedroom studio, and are easy to take with you on the road.

General specifications

Speaker type: 2-way powered speaker, Bass-reflex type
Frequency response (-10dB): 70 Hz - 22 kHz
Frequency response (-3dB): 85 Hz - 20 kHz
Crossover: 3.2 kHz
Maximum Output Level (Measured peak, IEC noise@1m): 100 dB SPL
Components: HF: 0.75" Dome, LF: 3.5" Cone
Nominal impedance: 6 O
I/O connectors: [Input Connector] L Side: COMBO (XLR/TRS Phone) ×2, RCA ×2, Stereo Mini, R Side: Speaker Input; [Output Connector] L Side: Headphone, Speaker Output
Output power: 26 W + 26 W (Dynamic, RL=6 O), 20 W + 20 W (THD 0.1%, 1kHz, RL=6 O)
Input sensitivity: LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu (Volume: Maximum)
Input Level: LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu (Maximum Input)
Input impedance: LINE 1 (COMBO): 20 kO, LINE 2 (RCA, ST Mini): 10 kO
Controls: Front: Volume, Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz), HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz)
Indicators: Power ON (White LED)
Power requirements: Depending on area of purchase; 100-240 V, 50/60 Hz (*)
Power consumption: 15 W
Cabinet material: MDF

Dimensions

Width: L Side: 132 mm (5.2"), R Side: 132 mm (5.2")
Height: L Side: 223 mm (8.8"), R Side: 223 mm (8.8")
Depth: Side: 189 mm (7.4"), R Side: 177 mm (7.0")

Net weight: L Side: 2.8 kg (6.2 lb), R Side: 2.1 kg (4.6 lb)

Accessories: Stereo Mini - RCA Cable 1.5 m, Speaker Cable 2.5 m, Anti Slip Pad, Quick Start Guide, Safety Guide
Packaging: Pair

* While this product will work at a voltage of between 100 V to 240 V, as limiter settings vary depending on the supply voltage, make sure to use this product at the supply voltage indicated on the rear panel of this product.

Notes: High-quality compact studio monitors for the uncompromising creator

HS Series speakers have become the standard in studio monitors, trusted for many years by the world's top audio engineers, producers, and artists. Now Yamaha has redefined their essence in a compact housing. The HS3 and HS4 are powerful tools to help create a wide range of audio content-from music production to video editing-that meets the expectations of creators who have limited space and need to keep the volume down but do not want to compromise on monitoring quality.

Sound that is always true to the original

The HS3 and HS4 continue the design philosophy and know-how of previous Yamaha studio monitors. No effort has been spared in the pursuit of the optimal product, and the resulting speakers comprise carefully selecting parts such as a high-performance class-D amp, a highly resilient MDF cabinet, and woofers and soft dome tweeters that deliver a sound that is faithful to the source despite their small size. They also feature proprietary "Twisted Flare Port" technology that reduces air turbulence noise in the bass reflex port, providing clear and accurate bass. That's the secret to why the HS3 and HS4 deliver outstanding resolution, sound image, and depth, with a flat response across all bandwidths without any colouring of the original sound.

Optimal sound tailored to your environment

The sound produced by speakers is sometimes affected by the surrounding environment.

The rear panels of the HS3 and HS4 are equipped with ROOM CONTROL and HIGH TRIM functions that allow you to make adjustments to achieve the ideal sound for any environment, such as reducing the unneeded, exaggerated low-end that can often occur when speakers are placed next to walls.

Inputs and controls to fit any use case

The rear panel of the HS3 and HS4 is equipped with combination XLR/TRS phone, RCA, and stereo mini connectors, allowing you to connect to a wide range of professional and consumer equipment such as computers, audio interfaces, audio mixers, and electric instruments. The most commonly used features-power button, volume knob, and headphone connector-are located in the front for easy access.

Compact and portable

The compact size of the HS3 and HS4 was made possible thanks to the highly efficient class-D amp. Using one amp for two speakers has enabled us to both reduce the weight of the speakers and simplify the cable connections. They take up little space even in a small bedroom studio, and are easy to take with you on the road.

General specifications

Speaker type: 2-way powered speaker, Bass-reflex type
Frequency response (-10dB): 60 Hz - 22 kHz
Frequency response (-3dB): 83 Hz - 20 kHz
Crossover: 2.3 kHz
Maximum Output Level (Measured peak, IEC noise@1m): 102 dB SPL
Components: HF: " Dome, LF: 4.5" Cone
Nominal impedance: 6 O
I/O connectors: [Input Connector] L Side: COMBO (XLR/TRS Phone) ×2, RCA ×2, Stereo Mini, R Side: Speaker Input; [Output Connector] L Side: Headphone, Speaker Output
Output power: 26 W + 26 W (Dynamic, RL=6 O), 20 W + 20 W (THD 0.1%, 1kHz, RL=6 O)
Input sensitivity: LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu (Volume: Maximum)
Input Level: LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu (Maximum Input)
Input impedance: LINE 1 (COMBO): 20 kO, LINE 2 (RCA, ST Mini): 10 kO
Controls: Front: Volume, Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz), HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz)
Indicators: Power ON (White LED)
Power requirements: Depending on area of purchase; 100-240 V, 50/60 Hz (*)
Power consumption: 15 W
Cabinet material: MDF

Dimensions

Width: L Side: 150 mm (5.9"), R Side: 150 mm (5.9")
Height: L Side: 240 mm (9.4"), R Side: 240 mm (9.4")
Depth: L Side: 213 mm (8.4"), R Side: 203 mm (8.0")

Net weight: L Side: 3.7 kg (8.2 lb), R Side: 3.1 kg (6.8 lb)

Accessories: Stereo Mini - RCA Cable 1.5 m, Speaker Cable 2.5 m, Anti Slip Pad, Quick Start Guide, Safety Guide
Packaging: Pair

* While this product will work at a voltage of between 100 V to 240 V, as limiter settings vary depending on the supply voltage, make sure to use this product at the supply voltage indicated on the rear panel of this product.

Notes: Tiny but powerful studio monitors from Yamaha's hugely popular HS range. Impressive bass response all the way down to 60 Hz despite their compact dimensions. Here in their white colourway.

Supplier's Notes:
High-quality compact studio monitors for the uncompromising creator

HS Series speakers have become the standard in studio monitors, trusted for many years by the world's top audio engineers, producers, and artists. Now Yamaha has redefined their essence in a compact housing. The HS3 and HS4 are powerful tools to help create a wide range of audio content-from music production to video editing-that meets the expectations of creators who have limited space and need to keep the volume down but do not want to compromise on monitoring quality.

Sound that is always true to the original

The HS3 and HS4 continue the design philosophy and know-how of previous Yamaha studio monitors. No effort has been spared in the pursuit of the optimal product, and the resulting speakers comprise carefully selecting parts such as a high-performance class-D amp, a highly resilient MDF cabinet, and woofers and soft dome tweeters that deliver a sound that is faithful to the source despite their small size. They also feature proprietary "Twisted Flare Port" technology that reduces air turbulence noise in the bass reflex port, providing clear and accurate bass. That's the secret to why the HS3 and HS4 deliver outstanding resolution, sound image, and depth, with a flat response across all bandwidths without any colouring of the original sound.

Optimal sound tailored to your environment

The sound produced by speakers is sometimes affected by the surrounding environment.

The rear panels of the HS3 and HS4 are equipped with ROOM CONTROL and HIGH TRIM functions that allow you to make adjustments to achieve the ideal sound for any environment, such as reducing the unneeded, exaggerated low-end that can often occur when speakers are placed next to walls.

Inputs and controls to fit any use case

The rear panel of the HS3 and HS4 is equipped with combination XLR/TRS phone, RCA, and stereo mini connectors, allowing you to connect to a wide range of professional and consumer equipment such as computers, audio interfaces, audio mixers, and electric instruments. The most commonly used features-power button, volume knob, and headphone connector-are located in the front for easy access.

Compact and portable

The compact size of the HS3 and HS4 was made possible thanks to the highly efficient class-D amp. Using one amp for two speakers has enabled us to both reduce the weight of the speakers and simplify the cable connections. They take up little space even in a small bedroom studio, and are easy to take with you on the road.

General specifications

Speaker type: 2-way powered speaker, Bass-reflex type
Frequency response (-10dB): 60 Hz - 22 kHz
Frequency response (-3dB): 83 Hz - 20 kHz
Crossover: 2.3 kHz
Maximum Output Level (Measured peak, IEC noise@1m): 102 dB SPL
Components: HF: " Dome, LF: 4.5" Cone
Nominal impedance: 6 O
I/O connectors: [Input Connector] L Side: COMBO (XLR/TRS Phone) ×2, RCA ×2, Stereo Mini, R Side: Speaker Input; [Output Connector] L Side: Headphone, Speaker Output
Output power: 26 W + 26 W (Dynamic, RL=6 O), 20 W + 20 W (THD 0.1%, 1kHz, RL=6 O)
Input sensitivity: LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu (Volume: Maximum)
Input Level: LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu (Maximum Input)
Input impedance: LINE 1 (COMBO): 20 kO, LINE 2 (RCA, ST Mini): 10 kO
Controls: Front: Volume, Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz), HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz)
Indicators: Power ON (White LED)
Power requirements: Depending on area of purchase; 100-240 V, 50/60 Hz (*)
Power consumption: 15 W
Cabinet material: MDF

Dimensions

Width: L Side: 150 mm (5.9"), R Side: 150 mm (5.9")
Height: L Side: 240 mm (9.4"), R Side: 240 mm (9.4")
Depth: L Side: 213 mm (8.4"), R Side: 203 mm (8.0")

Net weight: L Side: 3.7 kg (8.2 lb), R Side: 3.1 kg (6.8 lb)

Accessories: Stereo Mini - RCA Cable 1.5 m, Speaker Cable 2.5 m, Anti Slip Pad, Quick Start Guide, Safety Guide
Packaging: Pair

* While this product will work at a voltage of between 100 V to 240 V, as limiter settings vary depending on the supply voltage, make sure to use this product at the supply voltage indicated on the rear panel of this product.

Notes: The tiny but mighty Eurorack power supply. Winterbloom's love letter to DIYers is perfect for custom cases.

Micronova is a miniature 100x30mm power supply with a big soul. It can provide up to 18W of power for your modules and multiple units can be easily daisy chained to power larger systems.

Despite being adorably small, Micronova provides lots of flexibility for custom case builds. It can be powered through an attached DC barrel jack, screw terminals, or through an optional front entry panel.

Micronova is equipped with two Eurorack power headers that can be expanded using a busboard or flying bus cable.

Micronova also has critical safety features including reverse polarity protection, a resettable polyfuse, and over-current shutdown.

A suitable AC-DC power adapter is required.

A tiny 100mm x 30mm board with M3 mounting holes
Provides +12V @ 1A, -12V @ 300mA, and +5V @ 500mA
Includes two 16-pin Eurorack power headers
Requires a 15V to 20V center positive DC power supply
Multiple units can be daisy chained
Reverse-polarity, over-current, and over-temperature protection

Notes: The tiny but mighty Eurorack power supply with all the bells and whistles

Micronova is a miniature power supply with a big soul. It can provide up to 18W of power for your modules and multiple units can be easily daisy chained to power larger systems.

This bundle includes:

an assembled Micronova
an assembled Micronova busboard
a Micronova front entry kit

Please note that the front entry requires assembly. It's a delightfully easy kit, but make sure you know what you're getting into!

A suitable AC-DC power adapter is required. We have adapters available for domestic customers. International customers please take a look at the manual for guidance and recommendations.

Check out the manual to get to know Micronova and all of the delightful ways you can integrate it into your case.

100 mm x 30 mm x 13 mm
15-20V, 1.5A
+12V @ 1A
-12V @ 300mA
+5V @ 500mA
Daisy chainable
Busboard included
Front entry kit included

Notes: Tiny but mighty busboard for the tiny but mighty Micronova

This tiny 100x30mm busboard is a perfect companion to Micronova. It provides six additional power headers and is the exact same size as Micronova - perfect for your custom case build.

Includes one 16-pin to 16-pin Eurorack power cable for connecting the busboard to your Micronova or other power supply. If you need them, grab some 16-pin to 10-pin power cables for connecting power to your modules.

100 mm x 30 mm x 13 mm

Notes: Nive Grad is a level shifter designed for simplicity. Two Eurorack signals can be attenuated down to pedal and line levels, and two external line or pedal signals can be amplified up to Eurorack level. Integrating a drum machine, external synth, effects processor, or guitar with your Eurorack system has never been easier!

Nive Grad uses 1/8" jacks to save HP. If you want to use 1/4" gear with your system, ask your modular supplier about mono/TS 1/8" to 1/4" adapters or adapter cables.

Nive Grad pairs well with Noise Engineering's Xer Mixa system mixer, but can be used in any Eurorack system.

Type: Universal drum synthesizer
Size: Level Shifter
Depth: .9 inches
Power: 2x5 Eurorack
+12 V: 25 mA
-12 V: 25 mA
5 V: 0mA
Nive - level - from Latin niveum

Grad - step or degree- from Latin Gradus

Notes: Nive Grad is a level shifter designed for simplicity. Two Eurorack signals can be attenuated down to pedal and line levels, and two external line or pedal signals can be amplified up to Eurorack level. Integrating a drum machine, external synth, effects processor, or guitar with your Eurorack system has never been easier!

Nive Grad uses 1/8" jacks to save HP. If you want to use 1/4" gear with your system, ask your modular supplier about mono/TS 1/8" to 1/4" adapters or adapter cables.

Nive Grad pairs well with Noise Engineering's Xer Mixa system mixer, but can be used in any Eurorack system.

Type: Universal drum synthesizer
Size: Level Shifter
Depth: .9 inches
Power: 2x5 Eurorack
+12 V: 25 mA
-12 V: 25 mA
5 V: 0mA
Nive - level - from Latin niveum

Grad - step or degree- from Latin Gradus

Notes: Further pushing the boundary of clock-defined pedals, the latest entry in Old Blood Noise Endeavors' BL series is a Phase Repeater, in the process making a genre entirely of its own.

Phase repetition takes the modulation of a phaser and applies it to the realm of time, creating a completely unique sound and more like delay or reverb than its namesake phaser. First used in the OBNE Dweller pedal, the BL-52 Phase Repeater represents a new spin on the sound, with simple controls including a Clock slider that enlightens the timing of everything in the pedal.

At a point, describing sound feels like describing time: the fourth dimensional perplexity of it all! Of course, this makes sense in that time being intermingled with sound and frequencies only existing over a period of time, whatnot. We spend a lot of time thinking about all-pass filters, you and I. How they pass all frequencies, but at different times. How this, in the digital realm, can create a phaser or a reverb, depending on how much memory you allow it and thus, how much of the fourth dimension it's playing with at any given... well, time.

BL-52 is what we call a phase repeater pedal. It's an effect we stumbled upon in our Dweller pedal development, living somewhere between phaser, delay and reverb, as it creates a series of repeats both unexpected and pleasing. It's digital trickery to do something quite unfamiliar and once you've bonded with it, is irreplaceable.

The BL-52 Phase Repeater is solely focused on that effect, with the Clock control setting the timing of the entire system: the sample rate that determines signal fidelity, the timing of the phase repetition and the speed of the LFO that shapes the diffusion of the repetition.

In short, it is an effect that does not require exactness, but rather openness to where the repetition will lead you.

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


Dual wireless microphone system with fixed UHF receiver and 2 beltpack transmitters, supplied with a choice of neckband or lavalier microphones. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

In the box:

Dual channel receiver
2 x beltpack transmitters
2 x neckband microphones
2 x lavalier microphones
4 x AA batteries
2 x UHF antennas
2 x antenna leads
2 x rack-mounting ears
Mains power adaptor
6.3mm jack to jack lead

Notes: Expandoor

The Expandoor gets you quickly and simply using AMP's Melody Oracle, Star Song, or Touch Tones (as well as other possible future devices) as a CV and Gate controller. It outputs Eurorack-compatible CV and GATE signals, transforming your AMP device into a versatile and novel modular synth sequencer or controller. The Expandoor can be used as a standalone tabletop box, or mounted in a 3U 10HP rack space.

Three independent GATE outputs:

Just as the three "Register" zones on your AMP device gate the audio for the three octaves of the built-in synthesizer, there are three corresponding gate outputs on the Expandoor. The 1/8" jacks labelled "BS" "LH" and "RH" output ~11V DC gate signals whenever those zones are gating "ON" on your AMP device.

CV output, tuners and LED indicators:

The jack labelled "CV" outputs a tuned set of CV values (0-11V), tuned independently but correspondingly, to the set of tuners on your AMP device. The row of multi-turn tuners on the front panel allow fine tuning of each CV state. One tuner is active at a time, depending on the state of the "INTERVAL" zones on your AMP device. The active tuner is conveniently indicated in real time via lights found to the right of the tuners. The indicator lights serve a second function of showing you which tuner on the controlling AMP device is also active in parallel.

AMP LINK jacks

The AMP LINK jack on the bottom left of the front panel (with the arrow pointing IN) connects your controlling AMP device into the EXPANDOOR. Use only shielded CAT 5 or CAT 6 cables and connectors (the correct cables will have metal end connectors). The AMP LINK jack on the right outputs a signal identical to the input, allowing chaining of multiple Expandoors and/or Wave Expanders. Do not plug more than one AMP controlling device into a single Expandoor simultaneously, or damage to the devices could occur.

Each controlling device requires its own Expandoor or Wave Exapnder, but multiple expansion modules can be chained from one controlling device. One potential benefit to chaining expansion modules is the ability to output multiple tuned, corresponding but independent, CV channels. Meaning multiple sets of harmonic values could be tuned and accessed at the command of the single controlling AMP device, or accessed via other modules in your system.

Tech specs:

Input: AMP LINK via shielded CAT5 or CAT6 cable
Power: 12V DC Supplied via AMP LINK
Outputs: 3 Gate (~11V unipolar), 1 CV (variable 0-11V unipolar)
Tuners: 8 multi-turn fine tuners for CV, with indicator lights
Size: 3U 10HP (approximately 5.25" H x 2" W x 1.5" D)

Notes: Protective cover and inclined stand. All in one piece. On one side, it's a cover that protects the OP-1, shielding keys, screen, and knobs. But leaving the side connectors uncovered, so you don't have to unplug it to cover it.

It also provides the option to use it as an inclined stand for the OP-1, simply by reversing its position. Fitting snugly around the perimeter of the synthesizer.

The cover is decorated to resemble the recording view of the OP-1.

***The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Solid, adjustable microphone arm for attachment to keyboard stands.

- All parts already pre-assembled
- For tubes with 24 to 27mm inside diameter
- Microphone not included

Notes: Pique (uPeaks) 1U Intellijel Format

This is a 1U (Intellijel format) version of the Pique module which is based on the popular Peaks module from Mutable Instruments. It can be an ADSR-style envelope generator, an LFO and a drum emulator.

The module is calibrated, comes with a power cable, and a one year warranty.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Module A-149-1 is the first module of the A-149-x range. In this group we present by popular request several functions of Don Buchla's "Source of Uncertainty 265/266" (SOU) modules that cannot be realized with existing A-100 modules. Many functions of Buchla's 265 and 266 SOU can be realized with existing A-100 modules. For details please refer to A-100 patch examples.

Module A-149-1 has available four different analogue random control voltages that are generated in different ways.

The "Quantized Random Voltages" section has available 2 CV outputs: "N+1 states" and "2N states". N is an integer number in the range 1...6 that can be adjusted with the manual control (Man N) and an external control voltage CVN with attenuator. Whenever the rising edge of the input clock signal (Clk In) appears a new random voltage is generated at the N+1 resp. 2N output. The N+1 output is capable to generate N+1 different voltage levels (or states), the 2N output up to 2N different states. If for example N is set to 4 the N+1 output generates up to 5, the 2N output 16 different states. The voltage steps of the 2N output are adjusted to 1/12 V in the factory. Consequently, exact semitones can be obtained in combination with a VCO. The voltage steps of the n+1 output are adjusted to 1.0 V in the factory corresponding to octave intervals in combination with a VCO. For each output a trimming potentiometer is available on the pc board that enables the user to select other voltage steps for the output in question.

Even the "Stored Random Voltages" section has 2 stepped CV outputs available: one with even voltage distribution of the max. 256 output states and second one with adjustable voltage distribution probability. The distribution probability is adjusted by a manual control (Man D) and an external control voltage CVD with attenuator. With the control set fully counter-clockwise most of the random voltages will be low magnitude but even medium and high magnitude voltages may appear but with smaller probability. As the control is turned to the right (or a positive control voltage appears at the CVD input) the distribution moves through medium to high magnitude voltage probability. The symbol at the lower jack socket shows this coherence graphically. The voltage range is 0...+5V for both outputs of the "Stored Random Voltages" section. For each output a trimming potentiometer is available on the pc board that enables the user to select another voltage range for the output in question.

The A-149-1 can be extended by 8 random digital voltages with the A-149-2 Digital Random Voltages module.

Dimensions
12 HP
60 mm deep

Current draw
40 mA +12V
10 mA -12V

Notes: Kamieniec is an analog signal processing module directly inspired by a range of classic phaser effect units from 1970s that helped to define entire musical genres. Most of these classic devices contained a fairly small number of phase shifting stages, but made up for that lack with tons of character! However, what was initially intended for guitars is not necessarily sufficient for synthesizers. Therefore, the intention is to preserve the classic sound as it's transported it to a new tonal space while prioritizing flexible modular usability.

Just like many of the famous OTA-based phasers of the 1970s, Kamieniec sports four tuneable stages. However, there are two additional fixed stages included so as to increase the number of notches, and ultimately offer two versions of the mixed signal (that may be used as a stereo pair) at the two outputs of the unit. While the general topology is similar to a certain very classic phaser pedal, the circuitry has been redesigned with modern components and low noise op-amps to bring down the noise floor, improve the bandwidth, and offer a wider range of tuning. The feedback control can be set extremely deep, which results in a very high resonance that is capable of self-oscillation. This produces a unique sound otherwise unreachable for typical phasers, which can vary from subtle and creamy to utterly brutal and grinding. On top of that we've included switchable feedback paths, individual stage group outputs, CV inputs, built-in LFO, and daisy chaining ability to provide a comprehensive integration with a modular synthesizer system.

Expandability:
Unlike any other phaser module, multiple Kamieniec units can be chained together to achieve a more radical response with many notches. The general idea of chaining is to pass along the phase shifted signal to subsequent units before it is mixed with the original version in the last unit of the chain. This approach has a very different effect than plain cascading (connecting multiple phaser units in series), because a long chain of allpass sections yields a dense and uniform pattern of multiple notches, exactly like in a long phaser.

- Eurorack synth compatible
- 9hp, skiff friendly
- Current draw: +40mA / -40mA
- Reverse power protection

Notes: TPS80W Triple Power Supply - TYPE A

The TPS80W is a high power, super efficient and low noise studio grade power system for your Eurorack Modular. We carefully designed this power supply to perform optimally with even the most demanding, noisy and power hungry modules in your rig.

Notes: Introducing SUM0, a voltage-controlled oscillator with expanded harmonic possibilities, in a Eurorack format.

The 4 classic waveforms are generated by a meticulously designed oscillation engine.

You can modulate its frequency and its pulse width thanks to its integrated LFO, capable of reaching audible frequencies to achieve expressive modulations with the simple touch of a switch.

Expand the voice of your system by creating complex waveforms and high harmonic content thanks to its output mixer. This mixer also has an input to integrate an external signal to the mix output.

Of course, all its parameters (FM, PWM, SYNC, V/OCT) are at your fingertips through its patch points on the front panel.

And of course, assembled with a load of passion in Bocuma's studio-workshop in Guadalajara.

Nerdy-specs:

22HP
+12V > 12mA -12V > 12mA

Notes: Branded Analogue Solutions LED Jack Pins.

These will light red / green as the signal swings from a positive to negative voltage.

Use the for diagnostics - or, just because they look cool (especially in the dark!)

The plugs are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.

Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.

These don't just look pretty - they have practical advantages too!

Help seeing what's going on in the dark!

Help diagnose signal flow.

Notes: The module was named Kuzmin Filter in the past as a tribute to the developer of the Polivoks, Vladimir Kuzmin. For certain reasons, the module will now be called GRUNGE Filter (due to the sound), with the circuitry remaining unchanged.

The Polivoks was a Russian synth that was produced between 1982 and 1990.This module is the AE version of the filter that gave the Polivoks a unique, rough sound.

Beyond the basic design, this filter offers some additional features:

Two different resonance characteristics, hard and soft
An FM function, that adds the input signal to the modulation of the filter
An optional overdrive for the output, making the sound even more rough and untamed.

Notes: Unique, vintage reverb sound.

The SPRINGREVERB module brings the unique sound of this quite old (introduced in the 60's) technique for creating reverbs to the AE modular.

The reverb works by sending the audio signal to a set of 3 springs; at the other end of the springs the sound is picked up by a transducer, converting the mechanical movement of the springs back into an electrical signal. When the audio signal arrives at the end of the springs, the waves are reflected several times; these reflections create the reverb sound.

The spring "tank" (a metal box containing the springs and transducers, size approx. 24 x 9 x 3.5 cm) is connected externally by a cable.

The product contains all components: The module itself, the spring tank and the connection cable.

Note: The sound of a spring reverb is quite unique and has a strong vintage character; if you are looking for a more "clean", natural sounding reverb please take a look at the MULTIFX module.

Notes: Cara (uMarbles)

This is a new build of a micro version of Mutable Instruments Marbles. It retains all the functionality of the original full-sized module but takes up less space. It comes with jack lights that can be disabled via a jumper on the back.

These modules use tall bushing potentiometers to offer a more stable feel. You can see the difference in the last picture. You will feel much less wiggle with the tall bushing (left) than with traditional trimmer style (right).

The module is fully assembled, tested, and calibrated. The calibration is done with a 6.5 digit multimeter, itself recently calibrated, to ensure you get the highest accuracy from your module. Eurorack power cable included.

Width: 10HP
Depth: 34mm
Height: 3U
Power Consumption: +12V: 80mA -12V: 20mA

Notes: Dual 1x5 Passive Multiple

Two rows of 1 x 5 Passive Multing

Notes: Gate Expander for Sweet Sixteen mkII.

This is an expander, brings 8 gate inputs for the Sweet Sixteen mkII.

The panel is reversible, so jacks & buttons can be in the left or right side.

The orientation of the 10 pin ribbon cable is marked by the 'do not plug power here!' legend on the PCB, so it could be with the red stripe facing that in both GESS and Sweet Sixteen mkII modules.

Notes: Colortones SPRING REVERB II is an expressive, analogue voiced, vintage reverb engine hosting 3 versatile recreations of classic Reverb Units together with 2 independent modulation filters - Vibrato and RotoTrem.

Reverb Modes

STUDIO - Modern 90's Rack Reverb - A Warm and Natural studio reverb

TANK - 70's Electromechanical Reverb Tank with bright, wet acoustic room reflections

ECHOVERB - Based on the 90's Princeton PT2399 Echo Chips with pronounced delayed reflections/echoes.

The MOD knob adds an additional depth control for subtle Vibrato and RotoTrem FX adding a spatial dimensionality to the acoustic characteristics of the Reverberation.

Spring Reverb II captures the essence of iconic Reverbs while adding its own sonic characteristics. Whether you're looking to add a subtle touch of reverb to your playing or create expansive soundscapes, the SPRING REVERB II pedal is the perfect tool to take your playing to the next level.

Controls

Reverb Mode Switch

Select between : Classic 80's Studio Rack, 70's Tank, EchoVerb

Decay

Adjusts the decay time of the reverberation tail

Blend

Adjusts the Mix / Depth of the reverb effect with the dry signal. Noon / 12 O'Clock is 50/50 Wet Dry Mix, beyond noon edges toward a wet only sound

Tone

Tilt EQ style reverb tone control. Does not effect the dry signal tone. Noon / 12 O'Clock is unity

Mod

Adjusts the Depth of the vibrato like modulation within the Reverb engine, adding complex harmonics and spatial depth

LEDs

The Left LED indicates INPUT CLIPPING and will illuminate when the input signal is too hot. It also indicates when the SECOND LAYER of knob functions is active

Bypass LED indicates when the effect is active

Bypass

A short tap on the Soft touch footswitch activates True Bypass.

A Long press (500ms) tap will initiate the Layer 2 controls

Secondary layer controls

Micro tune delay time - EchoVerb mode only

Controls the master Speed/Time for the delay in the background of the EchoVerb Reverb engine

Boost

Allows for -+6dB output Boost. Noon is Unity

RotoTrem speed override

Controls the master Speed/Time for the RotoTrem Modulation. Add just a little to expand the depth of the Reverb or more to get a faster modulation

RotoTrem depth

Adjust the amount of the RotoTrem applied post Reverb.

Tech Specs:
True Bypass
Current Draw: 145mA
Input Voltage: 9V DC (center negative)
external power supply not included

Notes: The "uMM" combines a MIDI merger and two independent THRU distributors in a module that is only 4 HP wide. All sockets on the module are in MIDI TRS-B format.

At the heart of the two-input MIDI merger is a small, powerful ARM processor with plenty of buffer memory. Two MIDI streams are mixed to one output and can also be tapped via an additional second output. Two LEDs signal the operation of the merger: one LED indicates MIDI activity at the inputs, and a second LED warns of too much data at the inputs.

The second group of functions consists of two independent, separate MIDI THRU distributors. The MIDI data at the respective MIDI input can be picked up and distributed at the three THRU outputs. If required, a 1-to-5 distributor can be created from the two units by connecting an output of the left group to the input of the right group.

Features:

4x MIDI IN (TRS-B)
2x MIDI-OUT (TRS-B)
6x MIDI-THRU (TRS-B)
Powered via Doepfer connector