Search dance music

Notes: The Seabee is a multi-chorus pedal that delivers the finest analogue bucket brigade chorus tones, but like any Beetronics, it goes a few steps further. By digitally controlling the chorus delay time, the Bees have created Harmochorus - a never-before-heard pitch shifting modulation that can certainly inspire new genres.

Three Chorus modes provide the classic, lush chorus and vibe sounds we all love, with each mode offering the ability to control the effect in different ways. Vary between two different speeds and/or depths, go from zero to full depth intensity, or even increase the chorus delay time for a whole new spectrum of sounds.

Three Harmochorus modes give you a unique and inspiring new approach to the effect. The easiest way to explain it's that, when clean, it sounds like angel bees are accompanying you, and when paired with some buzz, it sounds like a swarm of killer bees producing the most dangerous pitch shifting modulation are after you! You can choose between two different pitches and speeds, a combination of twelve chords and twelve different arpeggio patterns, or simply choose between thousands of random patterns.

No matter which mode you choose, the Seabee will navigate you to inspiring and creative places.

Its simple layout with only three knobs hides a multitude of possibilities with alternate controls, three ramp shapes, tap tempo, a 4-way tone filter, feedback control, and a rate that ranges from very slow to ultra-fast waves, even reaching ring modulator ranges.

There are two stereo output options, 16 onboard presets, full MIDI control, expression in, external tap and 4 input level options so you can process guitar, bass, all kinds of active pickups or synthesizers and still keep the bucket brigade in its sweetest spot?

It's hard to believe that an analogue chorus can be so complete, versatile, unique and intense - all at the same time. But get ready, because Tone Fishing is about to beecome a thing.

Analogue sound path with the finest bucket brigade chorus tones.
3 Chorus modes / 3 Harmochorus modes
Never before heard pitch shifting chorus with arpeggios and random patterns.
Truly expressive ramping gives you musical control.
16 Onboard presets, Tap Tempo, MIDI, Expression and more.
Selectable input level (supports guitar, bass, active pickups, synthesizers and more)
Hand-assembled in Los Angeles, CA.

Packaging Dimensions: 15.2 x 13.7 x 7.6 cm
Weight: 0.49 kg

Notes: From one of the most iconic names in modular synthesis, the Variable Bandwidth Filter is a unique design, combining two state-variable VCFs with extensive CV control for clean, versatile filtering.

Supplier's Notes:
The Serge Variable Bandwidth Filter (VCF2) is probably the rarest classic filter in the Serge system, offering a unique combination of 2 filters. According to the 1983 Serge catalogue, the Variable Bandwidth VCF (VCF2) "has a band-pass output which can be varied manually or with voltage control. This is a standard response synthesizer VCF, typical to filters used in many studio systems. In the VCF2, two state-variable VCF's are connected in series to produce a total of five outputs. High pass, low pass, two fixed bandwidth outputs, and one variable bandwidth output are available. The outputs are all flat-response (no resonance) so the VCF2 is suitable for processing concrete sounds without introducing resonant coloration to the timbres. Under voltage or manual control, cut-off frequency of the high and low-pass outputs are affected, as well as the center frequency of the two band-pass outputs. Both center frequency and bandwidth are independently controllable on the variable bandwidth output."

Now - for the first time, designed and licenced by Serge - the VCF2 is available as a eurorack module. A new switch has been added which determines if the CV-controls are routed to the first (left), second (right) or both filters, bringing even more sonic options than the original.

Some details of the Random Source Serge VCF2 module:

Original Serge design, under licence and in cooperation with Serge Tcherepnin
Uses for High-end VCAs
Eurorack format (3U), 20 hp
Power consumption: 45mA @ +12V, 45mA @ -12V
Module depth: < 30mm (1.2")

Notes: You've heard of parametric EQ, now meet the paranormal filter. Filter on steroids with experimental six-band EQ, delay and loads of LFO modulation. A powerful, creative take on a filter box.

Supplier's Notes:
Dementor Paranormal Filter is a powerful analogue filter with infinitive of option to modulate the sound, it's perfect to create field soundlandscape and introduce in the dark side of the sound with noise and harmonics feedback sounds.

The Dementor is a unique filter, EQ and delay that takes your signals and makes sure to add spice and character to your sound.

You send one or two signals through the machine by using the two independent signal inputs with level control. The special filter features cutoff and resonance control is LFO controlled - in fact, it's three LFOs for cut-off, resonance and time modulation. You also get an experimental six-band EQ called Nuances (not a usual EQ!) with level control and feedback. The echo/delay, is also LFO controlled.

Dimensions: 20 × 30 × 10 cm

Notes: Cleverly designed melodic looping sequencer/sampler, offering four pattern banks each with 16 steps, aiming to bring 'DAW-style' workflows to Eurorack - sample reversing, pitch shifting, and so on.

Suppliers notes:
Torus is an overdub looper for harmonic playback. It offers four, 16-step pattern banks for sequencing as well as other sample manipulation techniques. It was designed to bring daw recording workflows (sample reversing, pitch shifting, sequencing, etc.) to eurorack cases.

Inputs:

A, B, C, D - buttons for choosing the current pattern. When combined with chain, these buttons can be used to sequence a pattern chain. Individual chains can be support 16 steps and are kept in sync with torus's global clock.

Chain - button for chaining behaviours. Chain + A, B, C, D can be used to sequence a pattern chain. Chain + record can be used to record multiple patterns in series and then chain playback. Chain + clear can be used to clear all recorded patterns. Chain + tap can be used to reset the current pattern when it contains recordings.

Mix - knob and CV used to blend between the input signal and the recorded pattern.

Record - button and gate in for turning on and off recording. When a pattern is not recorded, record will turn on and in sync with the clock. When a pattern is recorded, record will immediately turn on and off overdubbing.

Oct - buttons for octave shifting pattern buffer playback. Oct buttons can be used to clock divide/multiply an input clock signal.

Reverse - button and gate in for reversing buffer playback.

Harm - knob and CV for choosing harmonic pattern playback speeds. Playback speeds include both integer clock multipliers and perfect intervals.

Tap - button for tapping in tempos for the internal clock. Tap will repeat the current note when the current pattern contains recordings. Combine with chain to reset the entire pattern when the current pattern contains recordings.

Clear - button and gate in for clearing the current pattern. Combine with chain to clear all recorded patterns.

Clock - gate in for clock syncing

In L and in R - audio input, left will be converted to stereo if there is no right input.

Outputs:

Harm out - gate output mapping to harmonic playback resets. This gate output will range from 1-16x the clock out frequency depending on the harm knob/CV value.

Clock out - gate output for the global clock. The output gate frequency will be 0.25-4x the input clock speed based on the oct button state.

Reset - gate output when the current pattern has reset.

Out L and out R - audio output

100 mA +12V 40 mA -12V 0 mA 5V

16 HP 35mm deep

Notes: Monolith is a pitch-shifter reverb inspired by west coast synthesis techniques. It utilizes a time-domain based FM algorithm that acts as a shimmer.

Inputs:

In L and In R - audio input, left will be converted to stereo if there is no right input
Blend - knob and CV for controlling the fade between the dry and FM audio signals
DJ filter - knob and CV for controlling the reverb delay line filtering
Wet - knob and CV for controlling the reverb decay
Mod - knob and CV for controlling the scale of FM modulation. Low mod values correspond with microtonal pitch regions. High mod values correspond with multiple octave shifts.
On - button and CV gate for toggling on/off FM modulation. When FM modulation is turned on/off, the FM modulator oscillator is reset.
Quant - button and CV gate for toggling on/off FM pitch quantization.
Freq and v/oct - knob and CV for controlling the frequency of the FM modulator oscillator. Also control reverb pre-delay.
Shape - knob and CV for controlling FM modulator oscillator shape. Shape wavetable transitions from sine wave (8 o'clock) to triangle wave (12 o'clock) to square wave (4 o'clock).
Clock - CV gate for tempo syncing modulator oscillator period.

Outputs:

Out L and out R - audio output
Gate - CV gate out that is period synced with the FM modulator oscillator

100 mA +12V 40 mA -12V
14 HP 35 mm deep

Notes: Updated version of Source Audio's excellent Nemesis delay features an all-analogue dry signal path, meaning your original signal passes through unadulterated. Same versatile delay options, including patches based on vintage and modern hardware.

Supplier's Notes:
The NEMESIS Delay ADT is an updated version of Source Audio's award-winning NEMESIS Delay. It has all the tones and features that made the original NEMESIS so popular and includes some key updates including an analogue dry through signal path.

Analogue dry through means that the guitar's dry signal maintains a 100% pure and unprocessed analogue signal adding only the delay you choose. Other new features include enhanced MIDI functionality, 100 factory loaded presets, and an updated collection of delay effects easily accessible with the pedal's intuitive interface. The updated NEMESIS is also compatible with over 1,000 Neuro user presets created for the original NEMESIS Delay.

Additional NEMESIS Delay ADT features include stereo ins & outs, full MIDI functionality with 5-pin MIDI DIN and through ports, tap tempo with 15 different beat divisions, 8 onboard presets (128 with MIDI), bypass trails, external expression control, and a delay "freeze" function engaged by holding down the tap tempo footswitch.

NEMESIS Delay ADT captures the full spectrum of delay effects, starting with a comprehensive collection of meticulously crafted vintage delay tones. The Source Audio engineering team spent over a year studying numerous iconic and sought-after tape and bucket brigade delay units with a staunch dedication to identifying their every nuance and idiosyncrasy. At the opposite side of the spectrum, you'll find an advanced collection of sophisticated and specialized delay effects.

In addition to the basic 12 delay engines available on the front panel, the NEMESIS Delay ADT also features 12 extended delay engines for a total of 24 engines in all. These additional "back 12" effect engines offer a variety of tonal options and can be selected using the Neuro App or via MIDI. Any of these effects can be used to overwrite the default effect engines on the effect dial or can be stored as user presets.

Job one in the development of the NEMESIS Delay ADTwas to create a flexible, easy-to-use, and great sounding delay pedal. Out of the box, that's exactly what it is - plug in, select from the twelve onboard delay engines and make beautiful music... simple. But there is much more here than meets the eye - the truly "Big Idea" behind our One Series pedals was to give musicians a second, far deeper, set of options and editing tools with which to craft the perfect tone. The Neuro Desktop Editor and Neuro Mobile App are free downloads for iOS, Android, Mac, and Windows.

Additional parameters found in Neuro include Diffusion, Distortion, Wow and Flutter, Advanced Filtering, Sample Rate Reduction,12 different Tap Tempo Beat Divisions, Polyphonic Pitch Shifting and much more. Neuro's complete collection of delay effects includes "Sweeper" (a modulated filter delay), "Degrade" (with sample rate reduction), "Sequenced Filters," "Warped Record", "Chorus," and more.

Customized presets can be published to the cloud and made accessible to the entire Neuro Community. To date there are well over 8K published presets available for One Series pedals in Neuro. After editing your preset, burn it directly to the pedal and access it easily without reconnecting the Neuro App.

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Wireless PRO is the ultimate wireless microphone, packed full of powerful features that offer incredible flexibility for recording pristine audio for your content. Never lose a take with 32-bit float on-board recording, keep all your video and audio flawlessly synchronised with timecode, and capture incredible-sounding content effortlessly with intelligent GainAssist technology. The Wireless PRO delivers everything you could possibly want from a compact wireless microphone system, and much more.

State-of-the-art Wireless Audio

RODE pioneered the ultra-compact wireless microphone category with the original Wireless GO and this legacy carries on with Wireless PRO. Utilising state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, it delivers crystal-clear, incredibly stable audio with a range of up to 260m. Wireless audio you can rely on in almost any recording application.

Never Lose a Recording

There's nothing worse than pulling your audio into your editing software and realising your recording clipped and can't be used. With the Wireless PRO, this is a thing of the past. 32-bit float on-board recording means your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too loud or too quiet. Never worry about setting your gain perfectly again. Gamechanger.

Audio and Video, Perfectly in Sync

With the Wireless PRO's timecode capability, you can perfectly synchronise your audio and video with ease - no need for complex and expensive external timecode systems.

Pristine Audio in Any Situation

In addition to its 32-bit float on-board recording, the Wireless PRO offers a plethora of features that promise pristine audio in any situation. Ensure your audio is smooth and balanced with intelligent GainAssist technology. Precisely match your mic to your camera with flexible gain controls and tailored presets. Add an extra layer of protection with the safety channel. Perfect recordings, every time.

The Ultimate Pro Recording Kit
The Wireless PRO comes with everything you need to get set up and recording wireless audio right out of the box. Included are two professional Lavalier II microphones that are perfect for recording on-screen talent, as well as furry windshields for outdoor use, a pair of MagClip GO to attach your transmitters anywhere, a smart charging case and a handy accessory pack to store your lavs, cables and clips.

Connect to All Your Devices

Thanks to its analogue (3.5mm) and digital (USB-C) outputs, the Wireless PRO is universally compatible with cameras and other audio devices, both iOS and Android smartphones and tablets, and Windows and Mac computers.

Easy Configuration and Control

Check your audio levels at a glance with the bright LCD display and configure settings on the fly with dedicated controls for everything from gain adjustment to triggering recordings. Customise the system to your needs anywhere using your computer or smartphone with the RODE Central app. Complete control over your setup, so you can be ready for any recording situation.

Monitor and Record

Monitor your audio in the field with the Wireless PRO's high-power headphone output, complete with on-board level control, or connect a headset or narrator microphone such as a lavalier to capture a third audio track. Ultimate versatility.
Specifications Acoustic & Electrical (Wireless PRO)

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Maximum SPL: 123.5 dB SPL
Equivalent Noise (A-Weighted): 22 dBA
Signal-to-noise Ratio: 72 dB
Analogue Inputs: 3.5mm locking TRS (TX)
Analogue Outputs: 3.5m TRRS (RX)
Transmission Range: 260m (line of sight)
Digital Connectivity: USB-C
Operating System Requirements: macOS 10.15 above, Windows 10 and above, iOS 14 and above, Android 11 and above
Power Requirements: In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time: Up to 7 hours

Acoustic & Electrical (Charge Case)
Mechanical
Battery Capacity: 4200 mAH
Power Requirements: 5V/3A via USB-C
Charging Time: 2.5 hours
Charge Current: 2A (maximum)
Total charges (TXs and RX): 2 complete charges
Connection Type: USB-C (SuperSpeed USB-C cable required for optimal data transfer speeds)

Mechanical
Weight (grams)
TX: 35RX: 36
Charge Case: 177
Total: 284

Dimensions (millimetres)
TX: 46.5 (W) x 44 (L) x 20 (H)
Charge Case: 101 (W) x 82 (L) x 70 (D)

What's in the Box:

Wireless PRO TX
2 x Transmitter
30cm USB-C Lightning Cable
1 x SC21
30cm USB-C to USB-C Cable
1 x SC22
Premium Lavalier Microphone
2 x Lavalier II
Magnetic Clip for Wireless GO
2 x MagClip GO
Furry for the Wireless Go II
3 x Furry
Wireless PRO Receiver
1 x Receiver
Wireless PRO Charge Case
1 x Charge Case (PRO)
Wireless PRO Accessory Case
1 x Accessory Case
SC34 USB-C to C SuperSpeed Cable
1 x SC34
3.5mm TRS Patch Cable
1 x SC2

Notes: *** This version of UTILITIES comes with with screws instead of pins. Also designed for connecting alligator clips, just more affordable. ***

UTILITIES contains a set of simple auxiliary modules to expand the functionality of the PULSAR-23 drum machine. UTILITIES modules can also be used with any gear that works with CV signals (Eurorack, semi-modular synthesizers, etc.).

The modules included in UTILITIES can be divided into two groups:
1) Passive elements such as switches, resistors, capacitors.
2) Various types of amplifiers and waveshapers, linear, non-linear, controlled and uncontrolled.
Passive elements are designed to expand the possibilities of switching and controlling the PULSAR.

Linear amplifiers are needed when you need to feed a signal from a device operating in a lower voltage format to the PULSAR inputs. For example, it can be a step sequencer with an output voltage of 5 volts, while the PULSAR needs 10 volts to fully trigger the drum modules. Or it could be the output of a cassette tape recorder, which has an output of 1 volt, while for normal operation the PULSAR needs an input level of an audio signal of 5 volts. Non-linear and controlled amplifiers and waveshapers are designed to control the signal level, while simultaneously changing its spectrum, distorting its shape and adding harmonics. The circuitry of these amplifiers is very simple and based on the early developments of the transistor era, with its inherent beauty and grace.

UTILITIES connectors are made in the PULSAR-23 format on pins designed to connect the alligator clips. There are also adapters for 3.5mm Eurorack mini-jacks.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

There are also adapters for 3.5mm Eurorack mini-jacks. The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

Power supply: DC +12 v 5.5 x 2.1 mm center plus
Current consumption: 50 ma max
Dimensions: 288 x 193 x 40 mm
Weight: 0.75 kg

Notes: With the Zomo Flightcase D-Live-4 NSE, you can expand your DJ gear with a reliable partner that securely accommodates and stylishly showcases your Denon DJ SC Live 4 DJ controller. This high-quality flight case stands out for its robustness and elegance and belongs to the trendy NSE Series - Night Style Edition, which is renowned for its unique aesthetics and durability.

The Flightcase D-Live-4 NSE is the perfect shield for your DJ controller, whether you're traveling by car or air. These resilient cases are ready to face any challenge and protect your valuable equipment from the toughest stage conditions.

The flight case is made from 9mm thick laminated plywood, providing extra stability. This material safeguards against impacts and scratches, effortlessly withstanding the demands of touring. The sturdy construction is further enhanced by robust ball corners and specially reinforced, black lacquered aluminum profiles that ensure long-lasting durability while adding an attractive appearance to the case.

The Zomo Flightcase D-Live-4 NSE is incredibly user-friendly. The lid and front panel can be quickly and easily removed before each gig, even with the DJ controller still inside the case. This allows you to be ready for action at any time and focus entirely on your performance.

Not only does the Zomo Flightcase excel in practicality, but it also boasts an impressive visual appeal. Its elegant NSE Edition in black is a true eye-catcher that commands attention and emphasizes your professionalism. The case features convenient butterfly latches for secure handling, allowing for easy opening and closing of the lid.

You can rely on its high durability and optimal fit, ensuring your DJ controller receives the placement it deserves-secure, protected, and stylish.

Zomo Flightcase D-Live-4 NSE Features

Perfect fit: Custom-made for the Denon SC Live 4, the Zomo Flightcase D-Live-4 NSE provides optimal protection and a snug fit, keeping your DJ controller safe and well-protected.
Premium construction: Crafted from laminated 9mm plywood, the flight case offers a robust and durable structure that withstands both impacts and scratches.
Additional protection through interior padding: Soft interior padding safeguards your DJ controller from damage and unwanted influences, providing a secure and protected storage space.
Quick and easy access: The lid and front panel of the flight case can be quickly and easily removed, even with the DJ device still inside the case. This is ideal for fast access before and after performances.
Elegant and eye-catching design: With its sleek design in the black NSE Edition, the Zomo Flightcase captures attention and highlights your professionalism as a DJ.
Sturdy butterfly latches: These ensure a secure closure of the flight case while remaining easy to use. They also provide the option to attach an optional lock for additional security.
Transport-friendly: Integrated handles make the flight case easy and comfortable to transport.
Long lifespan: The flight case's sturdy ball corners offer additional protection against impacts and vibrations, contributing to its extended lifespan.

Technical Specifications

Compatible devices: 1x Denon DJ SC Live 4
Exterior material: 9mm plywood
Colour: Black (NSE)
Weight: 13.7 kg
Exterior dimensions: 716 (width) x 501 (depth) x 206 (height) mm

Notes: The Zomo Flightcase P-SL-A9 NSE is a set case suitable for the Pioneer DJ DJM-A9 mixer and 2x Pioneer DJ PLX-1000 turntables and convinces with a lot of details. The P-SL-A9 NSE flight case adds a new equipment case to the popular NSE series. This modern flightcase is incredibly robust to survive the hard tour everyday life without problems.

Abrasion, as well as cigarette burns, cannot harm the Flightcase P-SL-A9 NSE, thanks to the solidly processed, laminated 9mm plywood. Developed for the strenuous tour use, the Zomo Equipment flight cases are definitely tour-ready and protect your more expensive DJ equipment from damage, moisture or falls.

Thanks to the extra wide and black painted profiles made of aluminum and the massive ball corners, the Zomo DJ Case offers a very high durability. To exclude slipping of the DJ mixer, the DJM-A9 Equipment Flightcase is equipped with an excellent inner padding, which reliably protects the equipment from damage and scratches.

Even while your gear is still in the case, the front panel can be easily and quickly removed at the gig. The Zomo EA-1 angle adapter is recommended as a seperate accessory to connect the headphones even easier to the mixer.

The Pioneer DJ Equipment Case in the black NSE (= Night Style Edition) offers not only professional quality, but also convinces with a classic look - definitely an eye-catcher! For an incredibly secure fit of the lid and easy unlocking and locking provide the helpful butterfly snap locks. Additionally all NSE equipment cases are lockable with an optional padlock for higher protection against theft.

Features Zomo Flightcase P-SL-A9 NSE

Provides effective protection against shocks and scratches
High quality and workmanship for hardest use
Extra solid construction
classic design
High quality inner padding for best hold
Practical ball corners
High-quality butterfly fasteners
Integrated carrying handles for easy transport
Removable lid

Technical data

Suitable equipment: 1x Pioneer DJ DJM-A9 and 2x Pioneer DJ PLX-1000
Outer material: 9mm plywood
Color: Black (NSE)
Weight: tba
Outer dimensions: 1449 (width) x 563 (depth) x 209 (height) mm
** The devices shown and/or mentioned on the photos are NOT included!

Suitable devices:
Pioneer DJ DJM-A9
Pioneer DJ PLX-1000

Suitable brands: Pioneer DJ

Laptop shelf included: No

Notes: The Zomo Flightcase Rane Four Plus NSE Flightcase is custom-made for the Rane FOUR controller. Zomo expands its selection with the stylish NSE (= Night Style Edition) Flightcase, adding a new equipment flightcase to the lineup. In addition to its stylish appearance, the equipment case also impresses with its robust construction.

Thanks to the extra strong, black-painted aluminum profiles and the extra solid ball corners, the Zomo DJ Case offers exceptional durability. The practical internal padding of the Flightcase Rane Four Plus NSE guarantees secure protection for the Rane DJ controller against scratches, defects, or other damage.

The stylish, advanced design in the black NSE (= Night Style Edition) complements the concept of the Zomo Flightcase, not only with incredible professional quality but also in terms of design. The helpful butterfly latches allow for easy opening and locking, ensuring a highly secure hold of the lid. All NSE equipment cases can also be locked with an optional lock.

Cigarette embers, heat, and abrasion cannot harm the Flightcase Rane Four Plus NSE, thanks to the high-quality, laminated 9mm plywood. Designed for the rough stage environment, Zomo equipment flightcases are naturally suitable for road and air travel.

The front strip can be quickly and easily removed, even while your DJ gear remains in the case.

Features Zomo Flightcase Rane Four Plus NSE

High-quality flightcase suitable for the Rane FOUR controller
Provides high protection against shocks, scratches, or external damage
Professional craftsmanship for rugged touring use
Extra stable construction
Classic design in dark black NSE optics
Removable front strip - controller can remain in the flightcase
Useful storage for notebooks
Sturdily crafted interior padding for optimal grip
Convenient ball corners offer reliable protection against shocks and vibrations
Premium butterfly latches for quick closure
Practical handles for easy transport
Detachable lid
Technical Specifications
Compatible devices: 1x Rane FOUR
Retractable shelf for 1x 17-inch notebook integrated
Outer material: 9mm plywood
Color: Black NSE (Night Style Edition)
Weight: 19.3 kg
External dimensions: 873 (width) x 522 (depth) x 218 (height) mm
** The devices shown and/or mentioned in the photos are NOT included in the delivery!

Suitable devices: Rane FOUR
Suitable brands: Rane
Laptop shelf included: Yes

Notes: *** Onyx Edition ***

Delay and granular sampling combine to create unique ambience effects, creative reverbs and glitchy chaos. Hugely versatile pedal with five contrasting programs.

Supplier's Notes:
In the high woodlands of the north, undiscovered by most inhabitants, there ruled a clan of old, mystic Treefolk. On the first new moon of spring, these Treefolk could be heard grafting limbs to grow their young - splicing bits of branches from each generation to produce the next line of Treefolk. These new beings keep the lifeblood of all who came before in their new skin. These sounds are in part very old, but in part very new. They are referred to as... Fable.

Let your storybook adventure grows with the Fable Granular Soundscape Generator. The Fable gives you five all-new programs centered around sample and chop delay algorithms to create bizarrely beautiful networks of sampled and resampled sounds. The Fable uses a powerful dual DSP architecture to combine delay programs in series with granular sampling algorithms, each with its own analogue feedback path. Find unique soundscapes ranging from smooth, flowing ambience; to bizarre, organic reverberance; to chaotic, glitchy swarms.

So, what exactly is this granular effect and why is it a magical experience when combined with delay? Granular is a digital processing technique of micro-sampling, wherein short samples called grains are read from a delay buffer. In the Fable, players can adjust these grains by manipulating their sampling length, position, and buffer size from which they're read. They can be played at double or half speed for pitch shift and time stretching effects, play them in reverse, read from multiple positions, and more, in order to achieve different effects.

It's a powerful but complex technique and Walrus Audio created five streamlined programs in the Fable that explore different aspects of its sonic range.

Programs

I. Reverse Delay into Reverse Granular

Program 1 runs a reverse delay into a reverse granular algorithm, in which sampled grains are played backwards. Reversal and re-reversal build up in the feedback paths, creating a complex and organically shifting soundscape. Turn grain size down for long, smooth reversed transients, and grain size up for stuttering reverse glitch madness.

II. Forward Delay into Octave Up Granular

Program 2 runs a forward delay into an octave-up granular program, in which sampled grains are played at double speed. Swarms of double-speed grains build up in the feedback path for bright and airy cascades of sound.

III. Analogue Delay into Octave Down Granular

Program 3 runs a warm, dark analogue-style delay into an octave-down granular program, in which sampled grains are played back at half speed. Slowed down repeats combine with analogue-style processing to create deep, thunderous footfalls and thick, murky ambience.

IV. Multi-Tap Granular into Multi-Tap Granular (Grain-Verb)

Program 4 runs two multi-tap granular algorithms in series, in which multiple samples are played back from each granular buffer simultaneously. Multiple points of sampled sound build upon each other in the feedback paths to create glitchy clouds and unique organic reverberance. Time in this program controls time-stretching of both granular algorithms, changing both the length and tonal character of the granular effect.

V. Forward Delay into Randomized Pitch Granular

Program 5 runs a forward delay into a randomized pitch granular program, in which each grain is played back at a randomly selected speed and direction, varying between pitched up double speed, pitched down half speed, normal speed, plus forward and reversed playback from grain to grain. Pitch changes with each new grain, so play with the X knob in this program to control the rate of randomized pitch modulation.

Notes: *** Onyx Edition ***

Reverb and reverse delay go to the next level with this "ambient creation machine". Two DSP circuits with analogue feedback allow you to create epic soundscapes, time-stretching effects and more.

Supplier's Notes:
Once upon a time, in a fairy tale world, there stood a hidden forest. On the eve of every full moon, magical and delicate sounds of light were heard bouncing and reverberating through the trees. These sounds carry artifacts of notes moving backward and stretching through time. They are referred to as... Lore.

Create the soundtrack to your storybook adventure with the Lore Reverse Soundscape Generator. Made up of five different programs, each utilizes different combinations of delay and reverb that feed into each other for time-warping ambient creations. Featuring two DSP chips running in series, each with their own analogue feedback path, the Lore takes you on an adventurous journey rich with themes of reversing, time-stretching, pitch-shifting, and vast ambiance.

Having two analogue feedback paths allows each program to incorporate a unique mix of affected and unaffected feedback. The two feedback paths interact and build off of each other organically, offering the user a wide array of sounds and behaviours to experiment with.

Programs:

I. Reverse Delay into Reverse Reverb: Program 1 combines reverse delay with reverse reverb with a focus on organically interacting feedback paths. Space and ambiance build as the signal is reversed, re-reversed, reverberated, and reversed again within the feedback network. Experiment with the X knob to control how reversed your delay trails are with left being least reversed and right being fully reversed. Lots of fun with big, eerie minor chords!

II. Reverse Delay into Octave Up Reverb: Program 2 is a "light reverb" that combines octave-up harmonic feedback with an expansive, airy, reverb tank to create a breathy, spacious ambiance. Use the Regen knob to introduce a playful shimmer into the reverb decay. Increase the X knob to control the decay of the reverb. It sounds especially great with delicate fingerpicking parts.

III. Reverse Delay into Octave Down Reverb. Program 3 is a "dark reverb" that combines octave down harmonic feedback with heavy filtering and harmonic distortion, to create a sound that is thick, rich, and murky. Use the Regen knob to bring a lower octave into the reverb decay. Increase the X knob to control the decay of the reverb. Add in some high gain or fuzz to alter the time-space continuum.

IV. Reverse Reverb into Forward Reverb. Program 4 is a dual reverb program, featuring reverse reverb into forward reverb, Dual harmonic feedback paths allow the user to dial in octave up and octave down, and time stretching allows for control of the size and character of the space. Perfect for instantly transforming guitar into rich ambient pads. Use the Feedback knob to add a lower octave to the reverse reverb. Conversely, use the Regen knob to add an octave up to the reverse reverb decay. Control the decay of the forward reverb with the X knob. To channel all things ambient, experiment with dynamic picking and strumming techniques with the mix fully wet for ethereal drones and pads.

V. Pitch Delay into Pitch Delay. Program 5 features two "duelling" pitch delays, which shift the input signal up and down in complementary or opposing directions, allowing the user to create intricate harmonic patterns in the feedback network. Behaves like a sequencer at higher delay times and like a harmonizer at lower delay times. Use Feedback and Regen knobs to control various amounts of pitched delay repeats. Use the X knob to change the order of the 4th, 5th, and octave intervals that the pitch delay steps through. Experiment with short staccato notes to create some very interesting rhythmic parts!

Dive / Rise - Holding down the tap tempo switch will momentarily shift the clock rate of the pedal down or up and will hold it at that rate for as long as the switch is pressed. The direction of the dive can be changed by simply pressing bypass and tap simultaneously. A green LED over tap will indicate rise is set and a blue LED will indicate that dive is set.

The Mod knob will control the amount of modulation applied to the wet signal. Holding down bypass and adjusting the Mod knob will adjust the modulation rate. The bypass LED will blink to show your set mod rate.

Specs:

The die-cast enclosure's exact size is 3.62" x 4.79" x 2.25" including knobs.
Buffered bypass.
Power requirements are 9VDC, center negative (300mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Power supply not included.

Notes: *** Onyx Edition ***

Distortion and reverb meet in this unique pedal, sporting a joystick to tweak the sound and the option to flip the order of the two effects in the signal chain. Simple, quirky and effective.

Supplier's Notes:
Walrus Audio give you the two most quintessential effects that yield unruly amounts of power and influence to an instrumentalist: reverb and distortion. They have been harnessed and woven together for an eternity of ethereal power with The Melee: Wall of Noise. The Melee unapologetically uses a joystick to meld reverb and distortion into one massive blaze of sound. With the flip of the order switch, run the distortion into the reverb or reverb into distortion; signal chain is your call now. For the explorer, the Melee can run one of three different reverb programs Ambient, Octave, and Reverse.

In a less is more approach, Walrus Audio have intentionally decided on controls that are fun to use and will inspire a wealth of creative output. Use the joystick to control the amount of distortion by moving it up and down. Moving the joystick left and right will adjust your reverb mix. The tone and decay toggles have low, medium, and high settings. Modulation can be added to the wet signal by holding down the bypass switch and moving the decay toggle. The left position is no modulation, the middle is a slight modulation, and the right is a high modulation.

Algorithms

The Melee is equipped with three different reverb programs, which can be changed by simultaneously pressing the bypass and sustain stomp switches. Experiment with the order toggle switch to hear how differently these all react in front and after the distortion!

Ambient Reverb (Pink LED) - Huge reverb capable of massive trails and engulfing your chords into an angry wash of sound. Great for soaring melodic lines or shoegaze-driven chord progressions.
Octave Down Reverb (Yellow LED) - Similar to the Dark mode in the Slo, you'll find an eerie lower octave hovering in the reverb trail for a nice and dark atmospheric touch.
Reverse Reverb with Feedback (Blue LED) - Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload. Big, slow, and sad chords love to hang out here.

Momentary

Press and hold the sustain switch to ramp up the reverb trails. Release and the trails will ramp back down to where the decay switch is currently set. The sustain switch can also latch in all three programs. Press and release the Sustain switch to capture and sustain the current reverb decay for long pad-like sounds in your wet mix. Press again to release the latch, and the reverb trail will taper off based on the position of the decay knob.

Specs

The die-cast enclosure's exact size is 3.62" x 4.79" x 3.14" (including joystick height).
Three bypass modes, DSP, DSP + True, True Bypass
Power requirements are 9VDC, centre negative (200mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Power supply not included.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Befaco's unique GameBoy-based effects module allows you to change effects by swapping cartridges, all with CV control over key parameters. Effects include Skuara's harsh fuzz, Instruo's micro phaser and much more.

Supplier's Notes:
A crazy idea with the support of a bunch of crazy people.

A Multi FX module based on game carts!

FxBoy is a multi-FX module designed in collaboration with several talented manufacturers.

This is an effect unit with CV control over the parameters and Dry/wet control, with a Built-in CV controllable four bands EQ.

Each effect is physically hosted in a hot-swappable game cart and designed by a different manufacturer: Touell Skouarn with Skuara a harsh fuzz with overdrive, Instruo with micro Phaser, a two-flavoured Phaser, Feedback modules with a vintage Flanger, XOR with FX-Girl, a digital double effect module: Delay + Granularizer, Making sound machines with an analogue Wave folder, Tesseract with a bit crusher and Befaco Trash distortion!

What have these crazy people put in their cartridges?

Trash

Trash is a harmonic distortion that combines both clipping and folding flavours. Modes A and B will select between aggressive and more aggressive flavours!

Flanger

Analogue Wavefolder

Eskuara

AVMA
AVMA by Tesseract Modular is a bipolar VCA with one switchable wavefolder stage followed by an analogue frequency reducer. The VCA gain is x2, it can be used with i5V oscillator signals at the CV input for ring modulation effect.
Micro Phaser

Three cascaded all-pass filters, a built-in LFO and a saturator in the feedback path.

The purpose for this cartridge is to completely f&%k your phase up!

Instruo - We make sounds with the things that we make to make sounds with.

Technical Specifications

CV control over all parameters and Dry/wet
CV controllable four-band EQ, routable post or pre-effect.
Hot swap for all carts.
Selector for two different flavours of each cart.
Open specifications to design your own carts

Specs

Current needs: +12V: 125mA, -12V: 100mA, 5v: 0mA
Width: 12 HP
Depth: 35 mm (including power connector)
Aluminium, heat-treated front panel.
Designed and assembled in Barcelona.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Designed to integrate sound sources from outside Eurorack, Verbos's Real World Interface offers three channels including built-in microphones, preamps, envelope followers and a frequency detector.

Supplier's Notes:
The Real World Interface is a 3-channel external processing module intended for connecting with sound sources outside the system. The channels are oriented as vertical channel strips. The left and right channels have a built-in condenser microphone, preamp, envelope follower with variable decay and gate extractor. In addition to a preamp, envelope follower and gate extractor, the centre channel also has an Automatic Gain Control (fixed high ratio compressor), fundamental extractor (tracking lowpass filter), frequency detector and locked oscillator. Internal microphones are useful for introducing electro acoustic room sounds into the modular. Envelope followers can be used to have external signal levels effect parameters such as filter cutoff or level for building dynamics processors. Gate extraction allows external sounds such as metronomes, clicks, claps or room sounds to advance sequencers, trigger sounds or initiate other events. The Frequency Detector can extract the pitch of simple monophonic sounds but is also a semi chaotic CV source in the tradition of such modules since their introduction in the 1960's. The Locked Oscillator plays a sine wave at the same pitch as the input signal.

Size: 18HP

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Flagship model in IK's Uno Synth range, the Pro X adds extra synth power to the three-oscillator analogue design, with plenty of hands-on control and sequencing power.

Supplier's Notes:
Freedom of sound

Paraphonic dual filter analogue synthesiser

Embark on a liberating sonic adventure with UNO Synth PRO X, a powerful analogue synthesizer that'll ignite your creativity and elevate your music to new dimensions. Prepare to be inspired as you explore a world of infinite possibilities, where technology meets the timeless allure of analogue warmth.

Get creative

Featuring three discrete wave-morphing oscillators, the UNO Synth PRO X invites you to explore a vast sonic landscape. Unleash your imagination with PWM, sync, FM, and ring modulation capabilities: Your sonic palette knows no bounds.

Unrivalled sound sculpting

Discover a new realm of sonic possibilities with the UNO Synth PRO X's dual-filter design, combining classic OTA and SSI-chip-based filters. Immerse yourself in the moment as you weave intricate textures and shape your sound to perfection. Dive deeper into sonic exploration with the 16-slot modulation matrix enabling you to create intricate and evolving textures.

Sound connection

Take complete control over your music with over 30 hands-on controls, providing immediate access to your sound-shaping tools. With USB, MIDI, CV and Gate in/out options, integrating the UNO Synth PRO X into your setup is effortless.

4 kinds of effects

With 10 studio-quality FX in three slots and an analogue drive, your music will further come to life with warmth and character.

3 effects slots + analogue drive
Vintage chorus and uni-vibe
5 different delays
Hall, plate and shimmer reverbs

From sequencing to arranging

Unleash your creative potential, easily creating complex ever-evolving sequences. Try the 10-mode arpeggiator, equipped with a pattern designer to bring your melodies to life. New horizons are just around the corner with the Bassline mode, along with legato, mono and paraphonic modes, offering unprecedented expression of your musical ideas.

Advanced paraphonic 64-step sequencer
Per-step parameter recording with up to 48 parameters
Sequence randomizer that follows the scale you select
Parameter automation per step and real-time
10-mode arpeggiator with pattern designer
New Bassline mode plus legato, mono and paraphonic modes

Seamless DAW integration

With 256 user-editable presets the UNO Synth PRO X is a playground for sonic fun and exploration. Effortlessly sculpt save and recall your own custom sounds recapturing every moment of your creativity. And with the included Editor/Librarian software providing seamless control from your Mac or PC anything becomes possible. The Editor works as both a standalone application and as a plug-in inside your favourite DAW. This means you can program and play the UNO Synth PRO X just like a virtual instrument.

Designed for portability
The UNO Synth PRO X is not only a fun sound-design partner but also the perfect musical companion on the go, adapting to any environment. From backpack to mainstage, new sonic destinations will always be within reach.
Ultralight and ultraportable
PSU or USB battery pack power supply
Balanced stereo and headphone outputs

Custom travel bag available

Whether you're a seasoned sound designer or on the way to becoming one, UNO Synth PRO X is here to travel physically and sonically wherever you go.

UNO Synth PRO X Specifications

Sound generation
3 discrete wave-morphing oscillators
3 super-fast envelopes with loop and retrigger options
PWM, sync, FM and ring modulation
Dual-filter design, OTA and SSI-chip based
12 studio-quality FX in 3 slots + analogue drive

Performance tools
Advanced paraphonic 64-step sequencer
10-mode arpeggiator with pattern designer
New Bassline mode plus legato, mono, paraphonic
Audio input to filters and FXs or pass-through

Complete controls
Over 30 hands-on controls
16-slot modulation matrix
256 user editable presets
USB / MIDI / CV / Gate in/out
Backlight control and onboard factory preset restore
Advanced software control for Mac/PC

Ready for travel
Ultralight and ultraportable
PSU or USB battery pack power supply
Balanced stereo and headphone outputs
Editor/Librarian included
Optional gig bag available

Dimensions
Size (W x D x H): 33.3 x 15 x 5 cm, 13.11 x 5.91 x 1.96 in.
Enclosure: Plastic
Weight: 800 g, 1.76 lb
Power: iRig PSU-3A (included) or USB (5V/1.5A, 7.5W or above)

Package includes
UNO Synth PRO X
1x USB-C to USB-C Cable - 60 cm, 23.6 in.
Power Supply Unit
Quick start guide
Registration card

NOTE: USB power has inherent ground noise, so when connecting the UNO Synth directly to your computer via USB, you may hear more noise and interference than when the synth is connected to a USB wall charger or running via batteries. With the direct computer connection, you can reduce the USB ground noise and other interference by either using a USB isolator or a custom TRS cable into a balanced input on your preamp or audio interface where the ground is not connected at the balanced input side.

UNO Synth Pro Editor Compatibility

Computers
64-bit application. Requires a 64 bit CPU and Operating System.

Macr (64-bits)
Minimal: macOS 10.15 or later.

Windowsr (64-bits)
Minimal: Windows 8 or late

Notes: ***B-STOCK: Box opened, product in perfect working order***


Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!

Notes: The excellent SSL 2+ interface gets bundled up with a vocal mic, headphones and accessories to get you started recording. Great value.

Supplier's Notes:
SSL Recording Pack

Condenser mic, shock mount, studio headphones and XLR cable

Step Up Your Recording Game

Introducing the SSL Recording Pack from Solid State Logic, the all-in-one solution to capture your ideas and record great music. Available in a bundle with an SSL 2+ interface, the SSL Recording Pack includes a condenser microphone with shock mount and thread adapter, closed-back studio headphones and an XLR microphone cable, bringing you everything you need to record with your SSL 2+ interface.

Recording Made Easier

SSL Recording Pack includes everything you need to start recording now. Just plug your SSL microphone and headphones to your SSL 2+ interface and start turning your ideas into records.

SMC 80 Studio Microphone

Capture every detail and nuance of your vocals, guitars and acoustic instruments with the SMC 80 studio condenser microphone.

SHP 20 Headphones

Listen with clarity and detail. Hear every step of your recording and production process with SHP 20.

Included with SSL 2+ Interface

Bring Your Productions To The Next Level

The SSL 2+ Interface include the acclaimed SSL Production Pack, featuring a selection of must-have virtual instruments, plug-ins, samples and DAW, to let your creativity shine and bring your productions to life.

What's in the Kit

SSL 2+
SSL headphones (including 1/4" jack adapter)
SSL condenser microphone, shock mount and thread adapter (5/8" outer and 3/8" inner) for microphone stands
2.5 M XLR microphone cable

Specifications

SHP-20 Headphones
Operating Principle: Closed
Fashion: Supra-aural Transducer Type Dynamic
Loudhailer: 50mm
Impedance: 32 O
Sensitivity: 98 +/-3dB
Frequency Response: 15Hz-25kHz
Max. Power: 1200mW
Rating Power: 300mW
Cable: About 3m (straight)
Plug: 3.5mm + 6.3mm

SMC-80 Microphone
Element: 25mm condenser capsule
Polar Pattern: Cardioid
Frequency Response: 20Hz-20kHz
Sensitivity: -36dB+/-2dB (0dB=1V/Pa at 1kHz)
Output Impedance: 200+/-30% (at 1kHz)
Load Impedance: >1000 O
Self-Noise: 16dB A
Max. Input SPL: 136dB (at 1kHz<1% T.H.D)
S/N Ratio: 78dB
Phantom Power Requirement: 48V DC Phantom Power
Weight: ~340g
Dimensions:55x38x165mm

Notes: Sixteen Seconds Delay vintage eurorack version, inspired by the original looping delay from 1983.

The device topology is the same as first digital delays from that era, with an all-analogue signal path, pre emphasis and de-emphasis, compression and expansion, antialias and reconstruction filtering and input output buffering and mixing.

Digital processing is limited only to analogue to digital conversion, memory management and storage and digital to analogue conversion, all in glorious eight bits.

There's also an analogue triangle Low Frequency Oscillator for modulating delay time/pitch Maximum delay time has been increased to 32 seconds, there are toggle switches for slow/fast speed/pitch , freeze function and reverse playback.

On board modular inputs for CV control of sample rate, infinite/freeze, reverse, slow/fast, reverse, delay line retrigger for sync and stutter experimentation.

Slider illuminated controls are delay time coarse, delay time fine, sweep rate and depth, feedback and mix.

Proudly hand built in Uruguay, by Maneco Labs also creators for the Grone Drone machine Eurorack, Tabletop and Pedal drone generators among others.

Notes: Fire-themed version of the expressive J-Play Pack from Joue. Based around the idea of making music more organic and natural, the Play Pads transform the J-Play's behaviour, allowing you to control and perform in a range of ways.

Supplier's Notes:
The J-Play transforms your musical experience with a complete system combining an expressive multi-instrument, an intuitive application and interactive content to practice.

A unique playing experience

The J-Play instrument merges the quality of traditional musical instruments with the technology of the digital world. It is sensitive to natural gestures for unparalleled expressivity. It is also a modular instrument, once placed on the J-Play Board, the interchangeable Play Pads instantly transform the instrument into a guitar, keyboard, drums, xylophone or vocal effects station. Each pad has its own bank of instruments. Explore different musical styles and experiment with new sounds thanks to the integrated effects!

With you, everywhere you go, the design of the J-Play has been thought out to adapt to all playing styles. Compact and lightweight, it slips easily into a backpack and follows you on the go. Don't let any musical idea slip away!

Intuitive & powerful app

Create, modify and share your songs in an intuitive way thanks to the included application. No need to spend hours on overly complex music software anymore, the Joue Play application guides you step by step through the process of creating music to make it intuitive. The app has been designed as a simplified music creation software: making music is easy and fun!

The Joue Play app is freely available for Windows, macOS, iPadOS and very soon for iPhone (before end of 2023).

Exclusive content

Practice at your own pace and recreate your favourite songs: each week, a new playable cover track is added to the large collection of well-known covers already available in the J-app. Replay the rhythms of your favourite artists, and get creative by remixing them. Change the sounds, the tempo or add your own rhythms!

Grow with it

The perfect instrument for beginners, a great first step into digital music making for musicians but also a powerful MPE MIDI controller for advanced music producers. The J-Play will always suit your style in accordance with your skills and needs. Discover a whole new way to control your software. Combine all your controllers into one device that will always be at hand in your studio or on stage.

1 wooden board
5 Play Pads (Fire): guitar, piano, drum, audio, keys
USB-C to USB-C cable
Storage bag
J-App included with dedicated tutorials and sound banks

(!) If you want to use your J-Play with an iPad, make sure the port type. USB-C to lightning adapters are available as accessories.

Notes: The Dannysound Dynamics is a compressor / expander originally designed to process drums but, like most processing devices, it can be used for a wide variety of applications.

The module comprises of:

Compressor / Expander
Sub Bass Enhancer
3 Band Inductor-based EQ
Harmonic Exciter

The compressor / expander section uses a discrete transistor-based circuit that allows for soft clipping when overdriven.

The envelope detector is known as a feedforward type of circuit; taking its input from the signal before it goes to the compressor rather than after. This type of circuit is known for having fast attack times.

The Sub Bass enhancer has its own compression circuit that "ducks" the initial transient. This allows the sub bass to be increased without distortion on the transient peaks, increasing the overall level.

There is a MIX control to allow the unprocessed signal to be mixed back in with the processed signal.

The 3 band EQ is an inductor based LCR design. After Dannysound tryed out various EQ topologies, this was the design that sounded the nicest. When overdriven it gives a nice "bite" to the sound, and it has a certain characterful charm that's hard to put into words. The controls have a response that are subtle to begin with and get more pronounced as the controls are increased.

The Harmonic Exciter adds a little distortion to the high frequencies, which bring out the sparkle of cymbals or the snap snare drums. The operating bandwidth can be switched between Low (snare drum snap) or High (Cymbals sparkle).

There are inputs for side chaining and control with an external envelope as well as an envelope out to make the envelope detector output available to drive other modules.

It also features separate inputs and outputs for the Compressor / Expander and EQ sections, so they could be used as 2 separate modules.

Features:

Compressor/ Expander
Sub Bass Enhancer
3 Band Inductor-Based EQ
Harmonic Exciter
Envelope In/Out
Sidechain Input
Seperate In/Out for Compressor, Expander and EQ-Section
Power consumption: 85mA at +12V and 61mA at -12V

Depth: 25mm

HP : 12

Notes: The Wireless PRO is the ultimate wireless microphone, packed full of powerful features that offer incredible flexibility for recording pristine audio for your content. Never lose a take with 32-bit float on-board recording, keep all your video and audio flawlessly synchronised with timecode, and capture incredible-sounding content effortlessly with intelligent GainAssist technology. The Wireless PRO delivers everything you could possibly want from a compact wireless microphone system, and much more.

State-of-the-art Wireless Audio

RODE pioneered the ultra-compact wireless microphone category with the original Wireless GO and this legacy carries on with Wireless PRO. Utilising state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, it delivers crystal-clear, incredibly stable audio with a range of up to 260m. Wireless audio you can rely on in almost any recording application.

Never Lose a Recording

There's nothing worse than pulling your audio into your editing software and realising your recording clipped and can't be used. With the Wireless PRO, this is a thing of the past. 32-bit float on-board recording means your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too loud or too quiet. Never worry about setting your gain perfectly again. Gamechanger.

Audio and Video, Perfectly in Sync

With the Wireless PRO's timecode capability, you can perfectly synchronise your audio and video with ease - no need for complex and expensive external timecode systems.

Pristine Audio in Any Situation

In addition to its 32-bit float on-board recording, the Wireless PRO offers a plethora of features that promise pristine audio in any situation. Ensure your audio is smooth and balanced with intelligent GainAssist technology. Precisely match your mic to your camera with flexible gain controls and tailored presets. Add an extra layer of protection with the safety channel. Perfect recordings, every time.

The Ultimate Pro Recording Kit
The Wireless PRO comes with everything you need to get set up and recording wireless audio right out of the box. Included are two professional Lavalier II microphones that are perfect for recording on-screen talent, as well as furry windshields for outdoor use, a pair of MagClip GO to attach your transmitters anywhere, a smart charging case and a handy accessory pack to store your lavs, cables and clips.

Connect to All Your Devices

Thanks to its analogue (3.5mm) and digital (USB-C) outputs, the Wireless PRO is universally compatible with cameras and other audio devices, both iOS and Android smartphones and tablets, and Windows and Mac computers.

Easy Configuration and Control

Check your audio levels at a glance with the bright LCD display and configure settings on the fly with dedicated controls for everything from gain adjustment to triggering recordings. Customise the system to your needs anywhere using your computer or smartphone with the RODE Central app. Complete control over your setup, so you can be ready for any recording situation.

Monitor and Record

Monitor your audio in the field with the Wireless PRO's high-power headphone output, complete with on-board level control, or connect a headset or narrator microphone such as a lavalier to capture a third audio track. Ultimate versatility.
Specifications Acoustic & Electrical (Wireless PRO)

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Maximum SPL: 123.5 dB SPL
Equivalent Noise (A-Weighted): 22 dBA
Signal-to-noise Ratio: 72 dB
Analogue Inputs: 3.5mm locking TRS (TX)
Analogue Outputs: 3.5m TRRS (RX)
Transmission Range: 260m (line of sight)
Digital Connectivity: USB-C
Operating System Requirements: macOS 10.15 above, Windows 10 and above, iOS 14 and above, Android 11 and above
Power Requirements: In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time: Up to 7 hours

Acoustic & Electrical (Charge Case)
Mechanical
Battery Capacity: 4200 mAH
Power Requirements: 5V/3A via USB-C
Charging Time: 2.5 hours
Charge Current: 2A (maximum)
Total charges (TXs and RX): 2 complete charges
Connection Type: USB-C (SuperSpeed USB-C cable required for optimal data transfer speeds)

Mechanical
Weight (grams)
TX: 35RX: 36
Charge Case: 177
Total: 284

Dimensions (millimetres)
TX: 46.5 (W) x 44 (L) x 20 (H)
Charge Case: 101 (W) x 82 (L) x 70 (D)

What's in the Box:

Wireless PRO TX
2 x Transmitter
30cm USB-C Lightning Cable
1 x SC21
30cm USB-C to USB-C Cable
1 x SC22
Premium Lavalier Microphone
2 x Lavalier II
Magnetic Clip for Wireless GO
2 x MagClip GO
Furry for the Wireless Go II
3 x Furry
Wireless PRO Receiver
1 x Receiver
Wireless PRO Charge Case
1 x Charge Case (PRO)
Wireless PRO Accessory Case
1 x Accessory Case
SC34 USB-C to C SuperSpeed Cable
1 x SC34
3.5mm TRS Patch Cable
1 x SC2

Notes: A hugely powerful all-rounder, the Trident combines amp modelling with effects and looping, offering a rock-solid combination of features in a rock-solid die-cast aluminium case. A big step up from the cheaper Cerberus pedal.

Supplier's Notes:
Trident is the flagship integrated effects and amplifier simulation pedal from NU-X, built into a one-piece die-cast aluminium pedal housing to withstand the rigours of the stage and road. Using the new proprietary TSAC-4K physical modelling algorithm, with separate dedicated DSP engines for effects and amp simulation, the Trident employs premium AD/DA conversion hardware for accurate sound reproduction with minimal noise levels. Each of the 27 amplifier models faithfully emulates its real world counterpart with authentic features and functions, such as high/low inputs, cable jumping and toggle switch settings. Add to these 27 cabinet simulations and 4 microphone models and you have a wide palette of classic backline to conjure with. A full compliment of effects including boosters, filters, modulations, delay and reverb are available, with on-the-fly adjustments and foot switching easily from the top-side control panel. Current status and settings are neatly displayed in real-time on the backlit LCD display which is bright and clear for easy viewing on stage. Additional effects can be patched in via the send / return loop, which has serial or parallel modes and can also be used for connecting to an amplifier using the 4-cable method, or as a send-only output using branch mode. Full MIDI implementation is accessed through MIDI in and out for integration with external MIDI and switching gear. For interfacing with a Mac or PC computer, a USB type-C port can be used as a recording interface or for programming the Trident using the free to download Trident™ editing software. Additional connections on the rear panel include an expression pedal input, 3.5mm auxiliary input, 6.3mm headphone output, 2 x XLR outputs and 2 x 6.3mm outputs to support the many various wiring configurations. Overall, Trident is the complete war machine to launch your sonic attack with.

MIDI compatible (5-pin DIN adaptor leads supplied)
USB port for PC/Mac editing, audio interface and firmware updates
30 second phrase looper with pre and post routing
Trident™ Edit software free to download from www.nuxefx.com/trident.html
High resolution TSAC-4K physical modelling
Selectable amp & effects block order
Heavy duty cast aluminium housing
32 additional IR slots for custom cab simulations

Power supply9Vdc, 500mA, pin-negative (mains adaptor included)
Current consumption<330mA
Inputs: Exp pedal, Guitar, Return (6.3mm), Aux input (3.5mm)
Outputs: Send, Headphones, Out 1+2 (6.3mm), Out 1+2 XLR
Input impedance: 1M Ohm (guitar), 100k Ohm (return jack)
Output impedance: 1k Ohm (Out 1, Out 2, Send)
Aux Input Impedance: 10k Ohm
Headphone output: 6.3mm stereo (47 Ohm)
Dynamic range: 109dB
Latency: 1ms
Sampling format: 48kHz, 32-bit
USB port: Type-C PC/Mac interface
Dimensions: 312 x 164 x 65mm
Weight: 1.65kg

In the box

The box for this item contains:

Trident integrated amp modeller and effects pedal
9Vdc 500mA power adaptor
2 x 3.5mmm to 5-pin DIN adaptor MIDI leads
USB A to C cable

Notes: Intended for serious personal studios and professional music-production environments, the Erisr Pro Sub 10 helps you take charge of the low-frequency foundation of your mix. An ideal companion to Eris Pro- and Eris Studio-series reference monitors, the Eris Pro Sub 10 complements full-range monitors without overshadowing them and extends the reach of your full-range system's low end with a natural sound.

Powerful and musical, the PreSonusr Eris Pro Sub 10 active, front-firing studio subwoofer is designed to deliver fast and accurate transient response, extending low frequencies down to 20 Hz, allowing you to hear the full-spectrum range of your mix. Driven by 170W (RMS) Class AB amplification, the Eris Pro Sub 10's 10-inch, glass-composite, low-frequency driver delivers tight, responsive sub-bass, thanks to its lightweight and rigid cone. This design provides lower distortion than other materials for sub-bass reproduction that's as coherent and clear as your full-range monitors.

Extensive user controls include input gain, continuously variable lowpass filter for creating a seamless crossover transition, and a switchable highpass filter that removes content below 80 Hz from the full-range signal sent to the monitors. A continuously variable lowpass filter (50 Hz to 130 Hz) allows you to create a seamless crossover transition between the full-range studio monitors and subwoofer for the most accurate listening environment possible.

Features

10-inch, front-firing, glass-composite, low-frequency transducer
Front-firing, bass-reflex acoustic port
Continuously variable lowpass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwoofer
Switchable highpass filter removes frequency content below 80 Hz from the full-range subwoofer outputs to the main monitors
Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
Input gain control (-30 dB to +6 dB, continuously variable), polarity invert switch, and ground-lift switch
170 watt (RMS), Class AB amplification for up to 113 dB SPL, with a frequency response of 20 to 200 Hz
Left and right, balanced XLR and 14-inch TRS and unbalanced RCA main inputs
Left and right balanced XLR and 14-inch TRS outputs and XLR subwoofer output for connecting a second Eris Pro Sub 10

Versatile connectivity

Erisr Pro Sub 10 subwoofers provide the connections needed to act as the central hub for a basic monitoring setup, including left and right balanced XLR and 14-inch TRS and unbalanced RCA main inputs. Connect full-range monitors with left and right balanced XLR or 14-inch TRS outputs. An XLR subwoofer output lets you connect a second Pro Sub 10.

Seamless system integration

The Erisr Pro Sub 10 integrates seamlessly with your full-range monitors. A variable lowpass filter sets the upper (crossover) frequency reproduced by the subwoofer. A switchable highpass filter on the full-range outputs helps avoid frequency cancellation and reinforcement in the subwoofer's upper range, while a polarity-invert function ensures your system is in phase. A momentary footswitch (included) makes it easy to compare your mix with or without sub-bass frequencies.

Electronics
Voltage: 220-240V UK
Wattage: 250W Peak, 170W RMS

Performance
Peak SPL: 113 dB (@ 1 Meter)

Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Input Gain Range: -30 to +6 dB Low Pass Filter Control: 50 Hz to 130 Hz
Audio switches: Polarity Switch: 0 degrees or 180 degrees Ground Lift Switch: On/Off High Pass Filter Switch: On/Off Bypass Footswitch: On/Off
Monitor inputs: 2- Balanced XLR, 2- Balanced 1/4" TRS, 2- Unbalanced RCA
Power amplifier type: Class AB

Dimensions: 15.70 x 12.60 x 16.00 in
Weight: 37.00 lbs
Depth: 16" (40.6 cm)
Height: 15.75" (40 cm)
Width: 12.6" (32 cm)

Accessories
1-Button Footswitch Included

Notes: Fuzz meets synth meets reverb in this clever pedal. Built-in drone VCO, noise generator, LFO and effects allow you to warp and twist input signals into completely new tones and textures.

Supplier's Notes:
Grone 2 Dark Drone machine Pedal Version

Blocks description

Drone VCO:

Generates sound based on equations converted to analogue signals, there are sixteen equations selected by algorithm up pot. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0, A1 and A2, fourth pot Sample Rate controls pitch and speed of the oscillation. There's an expression jack input, EXP2 for controlling sampling rate.

NOISE GENERATOR: White noise with noise level pot.

Voltage Controlled Filter: MS20 resonant low pass filter, with CUT frequency pot control, RESONANCE, MODULATION 1 amount pot, Expression jack input 1 controls filter cuttoff.

LFO1: Low frequency oscillator routed to MOD1 from VCF, RATE and WAVEFORM shape Pots.

Waveforms are: ramp up, ramp down, square, triangle, sine, sweep, random levels, random slopes

FUZZ Section: gain stage that affects input signal, with controls for input gain and level.

Effects Section: Consists of a chorused reverb with delay, adding octave up or down component, with freeze function

Pots controls:
1-Blend controls mix of effects over final output signal
2-Octave blends mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component
5-Balance controls mixture from reverb and delay.
6-Pitch controls the sampling rate of the whole effects section, modifying delay time and reverb decay.

Footswitches:
1- Synth: mutes or enables the drone VCO and noise generator
2-Filter: Bypass for the VCF
3-Fuzz: Bypass for the fuzz that processes the input signal.
4-reverb: Bypass for the reverb/delay section
5-Freeze: toggles freeze function for reverb section

Jacks:
Input, Expression 1 input (VCF) Expression 2 (VCO sample rate), Output

Notes: ***B-STOCK: Box opened, product in perfect working order***


Keyboard version of IK's three-oscillator, dual-filter analogue synth. Classy purist analogue tones with some nice modern features like a step sequencer and effects. Also available in a cheaper, capacitive keyboard version.

Supplier's Notes:
Next generation analog for everyone

UNO Synth Pro gives you the power to create nearly any analog synth sound you can imagine. With its unique dual-filter, 3-oscillator paraphonic design, 256 presets, 64-step sequencer, studio-grade effects, expanded connections and much more, UNO Synth Pro breaks new ground for music makers.

Available in two form factors to suit all players' needs- stage-ready with metal housing and premium keybed; or ultra-portable, USB-powered with capacitive keyboard- UNO Synth Pro offers everyone the next generation of analog sound design in a smart format that fits any space or budget.

3 analog oscillators offer continuously variable waveshape, including pulse-width modulation. Oscillators can be hard-synced for more harmonically-complex tones, and oscillator FM (frequency modulation) lets you shape everything from bell-like sounds to screaming industrial tones. UNO Synth Pro even includes ring modulation for wobbly, sci-fi sound, and a white noise generator for a wide range of percussive sounds and epic rises.

Recreate famous synth sound sources or forge entirely new ones - UNO Synth Pro has the tools you need.

In addition to the original UNO Synth's 2-pole OTA multimode filter, UNO Synth Pro adds a new 2/4-pole SSI LP filter with self-oscillation. The dual filters can be used in series or parallel, with invertible phase, for a total of 24 possible filter combinations.

In short, the UNO Synth Pro can recreate the filter sound of the most famous classic synths as well as deliver fresh new options to the limits of your imagination.

UNO Synth Pro offers 2 full ADSR envelopes, one dedicated to the filter and the other to amplitude, with both available as sources to modulate everything from oscillator pitch and waveshape to LFO speed or even other envelope stages.

2 LFOs (low-frequency oscillators) can create classic synth vibrato, wah and tremolo as well as do more complex modulations including audio range FM.

And a 16-slot modulation matrix makes routing all these a breeze. You can quickly and easily design even the most sophisticated modulation scheme, with both internal and external sources, including MIDI controllers.

IK's experience in modeling analog studio effects is decades long. For UNO Synth Pro, you'll find a super warm and organic true-analog overdrive, plus 12 studio-quality effects in three simultaneous slots: modulation, delay and reverb. External signals can also be routed through these effects, with pre-effects filtering for maximum flexibility.

UNO Synth Pro provides an enhanced version of the original's long-lasting capacitance-sensing keys along with pitch and mod strips for enhanced expression. And it adds firm-touch rubber pads for the control sections, plus LED-backlit indicators and an LED display for key information, making it easier than ever to use UNO Synth Pro live on stage or in deep programming sessions in the studio.

UNO Synth Pro offers 256 user-editable presets, each capturing the full state of the sound engine from oscillators to effects.

An onboard 64-step sequencer offers both step and real-time recording, with automation for up to 40 parameters, letting you create incredibly intricate and evolving soundscapes. You can even write CV and gate automation.

And a 10-mode arpeggiator makes it easy to create intricate patterns and runs plus a new "chord mode" that takes advantage of UNO Synth Pro's paraphonic design.

UNO Synth Pro offers two noiseless, balanced stereo outputs as well as headphone out, for superior audio quality in any situation.

USB and 5-pin DIN MIDI In and Out make it easy to integrate with other synths, Mac/PC and mobile devices, and its assignable CV/Gate connections lets UNO Synth Pro interact effortlessly with your Eurorack or other modular system.

And now, audio input allows access to the filter and FX section for external signals, in addition to the original thru-put for daisy-chaining multiple units together without using a mixer.

Free Editor

Free UNO Synth Pro Editor for Mac/PC and iPad now available for all purchasers to download. This gives you access to all the advanced features 'under the hood' to manage presets and to easily create your own directly from your computer. Full details on the editor here: https://www.ikmultimedia.com/products/unosynthpro/?p=editor

Software Promo
All purchasers of UNO Synth Pro can now claim 2 free software downloads from IK's SE or CE product range: AmpliTube 5, SampleTank

Dimensions:
Size (W x D x H): 55 x 30 x 7 cm, 21.65 x 11.8 x 2.75 in.
Enclosure: Metal/plastic
Weight: 5.8 kg, 12.8 lb
Power: Power PSU

Package includes:
UNO Synth Pro
1x Micro USB to USB Cable
Power Supply Unit

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Collabing with YouTube sensation Andrew Huang, Endorphin.es offer up this impressive multipurpose processor module. Building blocks of stereo filtering, compression, reverb and more offer huge creative potential.

Supplier's Notes:
In collaboration with Andrew Huang, based on his modern music production techniques, Endorphin.es developed a creative audio processor with multiple blocks that can be moved around in order to achieve different flavours for sound design.

Processing unit without fixed structure: intuitively create astonishing and ephemeral timbres, from atmospheric rumbles to heavy or distorted textures.
Creative stereo effect processor with delay, reverb, filter and distortion with quickly explorable routing chain with single button press.
New generation ARM Cortex - M7 processor with 96 kHz 32 bit internal processing.
Lush hall and whooshing reverse reverbs with audio freeze and pre-delay.
Sidechain audio ducking envelope available both internally and externally with additional one knob single band compressor.
Tap delay with maximum delay time up to 2.5 seconds, external clock input with onboard clock divider and 1v/oct time control.
8x oversampled distortion algorithm.
Pre- and post - VCA, tone and volume controls with extra gain.

Power consumption
135 mA +12V
35 mA -12V
0 mA 5V

Dimensions
16 HP
26 mm deep with power ribbon cable connected.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Up to eight voices of digitally synthesised drums, percussion and synth sounds from this versatile module, featuring virtual analogue models as well as FM and wavetable options.

Supplier's Notes:
Flame "Fire" percussion synth module

The module is a full 8-way polyphonic drum and percussion synthesizer. It offers different digital synthesis algorithms, which can be distributed over 8 channels. The sound engine delivers virtual analog sounds as well as different digital percussion sounds, which are generated with FM, wavetable or virtual analog synthesis. It is also possible to create sim- ple monophonic bass or synthesizer voices.

During development, particular attention was paid to direct and simple usability with regard to live operation. The hardware essentially consists of two parts (which are deli- vered together). On the one hand there is the basic module with all controls, the display, connections for MIDI, 2x CV inputs and 5 audio outputs.

There is also a separate XFIRE I/O extension with sockets for the 16 analog trigger/gate/CV inputs and 3 additional audio outputs. Both modules are connected via a 60cm long ribbon cable. In this way, the XFIRE module can be installed anywhere else in the rack. The base module is therefore only 22TE wide and can also work alone without the extension as a MIDI expander.

A maximum of 8 audio outputs are available. A stereo pair (outputs 7+8), plus 6 additio- nal individual direct outputs. All outputs are freely configurable. Two pages with settings for panorama and volume are available for the stereo main out.

There is a gate/trigger input and a configurable CV input for each channel. Two additio- nal programmable CV inputs can be used for further controls. Regardless of the analog connection, the module offers full MIDI functionality. Two MIDI inputs and a MIDI output/softthru allow integration into an external MIDI setup. The firmware can be upda- ted via MIDI Sysex. The created KIT data can also be saved or exchanged.

Notes: ***B-STOCK: Box damaged, missing documentation, product in perfect working order***


Keyboard version of IK's three-oscillator, dual-filter analogue synth. Classy purist analogue tones with some nice modern features like a step sequencer and effects. Also available in a cheaper, capacitive keyboard version.

Supplier's Notes:
Next generation analog for everyone

UNO Synth Pro gives you the power to create nearly any analog synth sound you can imagine. With its unique dual-filter, 3-oscillator paraphonic design, 256 presets, 64-step sequencer, studio-grade effects, expanded connections and much more, UNO Synth Pro breaks new ground for music makers.

Available in two form factors to suit all players' needs- stage-ready with metal housing and premium keybed; or ultra-portable, USB-powered with capacitive keyboard- UNO Synth Pro offers everyone the next generation of analog sound design in a smart format that fits any space or budget.

3 analog oscillators offer continuously variable waveshape, including pulse-width modulation. Oscillators can be hard-synced for more harmonically-complex tones, and oscillator FM (frequency modulation) lets you shape everything from bell-like sounds to screaming industrial tones. UNO Synth Pro even includes ring modulation for wobbly, sci-fi sound, and a white noise generator for a wide range of percussive sounds and epic rises.

Recreate famous synth sound sources or forge entirely new ones - UNO Synth Pro has the tools you need.

In addition to the original UNO Synth's 2-pole OTA multimode filter, UNO Synth Pro adds a new 2/4-pole SSI LP filter with self-oscillation. The dual filters can be used in series or parallel, with invertible phase, for a total of 24 possible filter combinations.

In short, the UNO Synth Pro can recreate the filter sound of the most famous classic synths as well as deliver fresh new options to the limits of your imagination.

UNO Synth Pro offers 2 full ADSR envelopes, one dedicated to the filter and the other to amplitude, with both available as sources to modulate everything from oscillator pitch and waveshape to LFO speed or even other envelope stages.

2 LFOs (low-frequency oscillators) can create classic synth vibrato, wah and tremolo as well as do more complex modulations including audio range FM.

And a 16-slot modulation matrix makes routing all these a breeze. You can quickly and easily design even the most sophisticated modulation scheme, with both internal and external sources, including MIDI controllers.

IK's experience in modeling analog studio effects is decades long. For UNO Synth Pro, you'll find a super warm and organic true-analog overdrive, plus 12 studio-quality effects in three simultaneous slots: modulation, delay and reverb. External signals can also be routed through these effects, with pre-effects filtering for maximum flexibility.

UNO Synth Pro provides an enhanced version of the original's long-lasting capacitance-sensing keys along with pitch and mod strips for enhanced expression. And it adds firm-touch rubber pads for the control sections, plus LED-backlit indicators and an LED display for key information, making it easier than ever to use UNO Synth Pro live on stage or in deep programming sessions in the studio.

UNO Synth Pro offers 256 user-editable presets, each capturing the full state of the sound engine from oscillators to effects.

An onboard 64-step sequencer offers both step and real-time recording, with automation for up to 40 parameters, letting you create incredibly intricate and evolving soundscapes. You can even write CV and gate automation.

And a 10-mode arpeggiator makes it easy to create intricate patterns and runs plus a new "chord mode" that takes advantage of UNO Synth Pro's paraphonic design.

UNO Synth Pro offers two noiseless, balanced stereo outputs as well as headphone out, for superior audio quality in any situation.

USB and 5-pin DIN MIDI In and Out make it easy to integrate with other synths, Mac/PC and mobile devices, and its assignable CV/Gate connections lets UNO Synth Pro interact effortlessly with your Eurorack or other modular system.

And now, audio input allows access to the filter and FX section for external signals, in addition to the original thru-put for daisy-chaining multiple units together without using a mixer.

Free Editor

Free UNO Synth Pro Editor for Mac/PC and iPad now available for all purchasers to download. This gives you access to all the advanced features 'under the hood' to manage presets and to easily create your own directly from your computer. Full details on the editor here: https://www.ikmultimedia.com/products/unosynthpro/?p=editor

Software Promo
All purchasers of UNO Synth Pro can now claim 2 free software downloads from IK's SE or CE product range: AmpliTube 5, SampleTank

Dimensions:
Size (W x D x H): 55 x 30 x 7 cm, 21.65 x 11.8 x 2.75 in.
Enclosure: Metal/plastic
Weight: 5.8 kg, 12.8 lb
Power: Power PSU

Package includes:
UNO Synth Pro
1x Micro USB to USB Cable
Power Supply Unit

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Pro VLA II is a tube driven Vactrol-based compressor/leveling amplifier designed to excel in any professional audio environment. Superior performance and an incredible tone makes the Pro VLA II and indispensable tool for tracking, mixing, mastering, dynamic control of live sound sources or for use in broadcast audio.

Capable of delivering a far more musical natural sounding and sonically transparent compression than competitive units in its class, the Pro VLA II uses an Opto-electronic circuit rather than the more typical design VCA driven level detection circuit. This VCA-less design coupled with a 12AT7 vacuum tube in the gain stage makes the Pro-VLA II the ideal dynamic control device for critical audio applications.

Exceptional signal integrity with extremely low noise and low distortion is achieved in the Pro VLA II by utilizing a transformerless design throughout.

Unlike typical compression units that use Voltage Controlled Amplifiers (VCA's) to handle level detection, the Pro VLA II's Opto-electronic design allows a far more transparent and musical sounding compression without sounding aggressive or un-natural. This Vactrol based optical electronic circuitry is the basic component of the classic highly sought after compressors of past.

The Vactrol design allows the Pro VLA II to react to audio signal in much the same way the eye naturally adjusts to fluctuations in light levels, smoothly, quietly and almost imperceptibly.

The Pro VLA II is a soft knee leveling amplifier by design. Although capable of providing dramatic compression effects, the Pro VLA II was designed to excel in any application where transparent, expressively musical dynamics control is desired.

Large highly visible backlit analog VU meters accurately display input and output levels while extremely fast 10-segment LED's display gain reduction. For added functionality, the LED's display either average level for mastering & mixing applications or peak hold for monitoring individual sources when tracking audio.

XLR and 1/4" TRS balanced inputs and outputs are provided to ensure the Pro VLA II can connect with any audio source or hardware. A +4 dBu/-10 dBu mode switch optimizes the Pro VLA II I/O for either consumer or professional equipment.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Two decades in the game and the mighty MicroKorg remains a classic. Crystal version celebrates the anniversary with a fresh new look and the same punchy sound.

Supplier's Notes:
A shining homage to two decades of microKORG legacy

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio.

The instruments that musicians recognise as "classics" are those that are loved and always in use, regardless of times and trends. The word "classic" symbolises musical instruments that are revolutionary in their field. There may be imitations of a classic, but the distinct character of the original shines more brilliantly and is only enhanced by time.

Two decades ago, the portable, battery powered microKORG was born with a radical new micro-keybed, a powerful Vocoder and ready-to-use sounds ideal for contemporary genres delivering countless hit performances, and instantly revolutionising the way musicians played. This compact sound monster introduced synthesis to a vast number of non-keyboard playing musicians and created a way of making music we now take for granted: a small keyboard resting unassumingly atop a larger one onstage, made for use by hobbyists and pros alike and finding itself front and centre of studios worldwide from the smallest bedroom to the largest pro recording facility.

To celebrate the 20th anniversary of its release, the special edition microKORG Crystal offers a unique and stunningly stylish take on this beloved synth - now a classic in its own right.

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio. microKORG Crystal is the ultimate reincarnation of this iconic synth.

"Skeleton" type semi-translucent chassis, with matching knobs and controls

Previously unchanged, the microKORG Crystal features a new take on the structure of the microKORG, with a semi-translucent chassis that lets you see the electronics and internals. Even the controllers are semi-transparent, including the knobs, dials and wheels. As a commemorative model, the microKORG Crystal is great fun to look at from any angle, and as its name suggests, it "crystalizes" the energy and feelings of the KORG team behind its birth.

A panel with a beautiful sheen

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Aluminium side panels for a sturdy feel

The original microKORG featured wooden side panels that suggested a retro feel, serving as an elegant accent to the analogue modelled synth engine. This new special microKORG features sleek aluminium side panels for a clean and depurated look.

Dedicated transparent carry bag

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Specifications

Sound generation:
Analogue Modelling Synthesis System

Synthesizer program:
Multi Timbral: 2 (max, Split/Dual Mode)

Voices: 4 voices

Sound source:
2 Oscillator + Noise Generator
Multi Mode Filter (-24dB/octLPF,-12dB/oct LPF/BPF/HPF)
EG×2
LFO×2
Virtual Patch×4

Voices: 4 voices

Vocoder program

Voices: 4 voices

Sound source:
1 Oscillator +Noise Generator
EG×1
LFO×2 8
Channels vocoder
Level and pan of each channel can be edited
Formant Shift function

Programs: 128
Effects: Modulation effects (3 types), Delay (3 types), Equalizer
Arpeggiator: 6 types

Controllers
Real-Time control knob X 4 (3 level Selection),
Arpeggio ON/OFF

Keyboard: 37 Keys (mini-keyboard, keyboard has velocity)
Inputs: AUDIO IN 1,2, Level switch LINE/MIC, [AUDIO IN 1, 2 (LINE) ], [AUDIO IN 2 (MIC)]
Outputs: L/MONO, R, Headphones
MIDI : IN, OUT, THRU
Display : 3 characters×1 line with 8 segment LED
Power supply: DC 9V (AC adapter)
Power: 6.4w Max
Dimensions: 524 x 232 x 70mm
Weight: 2.4 kg (instrument only, without batteries or microphone)
Included items: AC adapter, condenser microphone, dedicated transparent carry bag

Notes: Unlock your creativity anywhere

Introducing SEQTRAK, the ultimate music creation station that empowers you to capture, create and connect with fans - from anywhere you happen to be.

Capture

Capture ideas as quickly as they come.

All-in-one system

Drums. Synths. Sound design. Sequencing. All included. With an array of features, all loaded in a compact, lightweight design, SEQTRAK allows you to start producing right away - no matter where you are. It's got everything you need. And more.

Lightning-fast workflow

SEQTRAK makes capturing ideas simple with a clear 3-part user interface and real-time, hands-on controls. You'll produce your music without menu-diving or waiting for boot times. Seize moments of inspiration and unleash your creativity in no time at all.

Extensive sounds

SEQTRAK extensive library contains over 2,000 presets. You'll find a vast collection of professionally crafted sounds - from rich pianos, to shimmering synths and thundering drums. More will be available with updates to the SEQTRAK app.

Onboard sampling

Capture your own unique sound samples effortlessly. SEQTRAK's sampler offers seven sound slots and a variety of effects, allowing you to shape and transform your samples with ease. Say a phrase, tap a spoon, or record your favourite pet - then customize to create polished Tracks - all in high-quality 44.1 kHz/16-bit format.

Make music on the go

With its compact size, lightweight design, built-in speaker and microphone, as well as a rechargeable battery, you can take SEQTRAK anywhere - from the studio, to the stage, to the sofa. No need to worry about power outlets or tangled cables. Create, perform, and share your music - anytime, anywhere.

Create

Turn your ideas into original music.

Sound engines + effects

Double your creative potential with two versatile sound engines. AWM2 (Advanced Wave Memory 2) boasts an impressive 128-note polyphony and specializes in authentic sounds like pianos, strings, and guitars, while the four-operator FM engine produces stunning synth pads, leads, FM electric pianos, and more. Additionally, SEQTRAK includes powerful effects for a polished sound.

Sequencer

SEQTRAK's advanced Sequencer allows for intuitive and seamless composition, arrangement, and playback of musical Tracks. With its user-friendly interface, you can easily navigate and control various parameters, such as tempo, swing, and track settings.

Sound editing

Inside the included SEQTRAK app you'll find an intuitive graphic user interface that lets you quickly dive into each Track and shape your sounds with precision. Editing includes a comprehensive set of functions, including envelopes, filters, and effect manipulation, enabling you to refine your compositions with meticulous detail.

Connect

Share your music. Connect with your fans.

Performance

Take centre stage with the SEQTRAK's powerful performance features. Create arrangements on-the-fly by combining Tracks and Patterns, remixing beats, and muting/unmuting Tracks in real-time. Add polish and sparkle to your music using global effects - then control these sounds live while you perform.

Visualizer

The SEQTRAK app has a Visualizer mode that transforms your music into a captivating visual experience. With this free performance and production feature, you'll bring your music to life with stunning visuals that sync perfectly with your songs. Customize and tweak Patterns, motion effects and more, however you see fit. There's even an Augmented Reality (AR) mode that allows you to integrate 3D virtual objects into real-world live videos.

Connectivity

- Bluetooth MIDI: Connect wirelessly to the SEQTRAK App & Visualizer, enhancing convenience and mobility.

- Wi-Fi: Transfer WAV samples wirelessly, eliminating the need for cables.

- MIDI In/Out: Connect to other hardware synths, MIDI controllers, or a computer; expanding your sound options and enabling integration with external devices.

- USB-C: Establish a single cable connection for MIDI and stereo audio to a computer simplifying setup and streamlining workflow.

- AUX In: Connect to drum machines, synths, and other external sources, expanding and diversifying your sound.

*Wireless functions may not be available depending on your area. Check with your Yamaha dealer. Windows PC cannot use wireless functions.

Specs
Tone Generator: AWM2, FM: 4 operators
Maximum Polyphony: AWM2: 128, FM: 8
Wave: Preset: 800 MB (when converted to 16-bit linear format), User: 500 MB
Effects: Reverb × 12 types, Delay × 9 types, Master Effect × 85 types, Single Effect × 85 types, Master EQ 5 bands, LP-HP filters for each track

Tracks

Track Types: DRUM, SYNTH, DX, SAMPLER
Number of Tracks: 11

Sounds

Number of Sounds: Preset Sound: 2032 Preset Sampler Sound: 392 *Can be added from the SEQTRAK app
Connectivity


USB: USB Type-C (power, MIDI to host, MIDI to device, audio)
Headphones: [PHONES] (stereo mini jack)
A/D INPUT: [AUDIO IN] (stereo mini jack)
MIDI: [MIDI] IN/OUT *Only included cable can be used.

Functions
USB audio interface: [Sampling Frequency = 44.1 kHz (quantization bit depth: 24-bit)] Input: 2 channels (stereo 1 channel), Output: 2 channels (stereo 1 channel)
Bluetooth: MIDI transmission/reception (wireless capability varies by country)
Wi-Fi: Data transmission/reception with dedicated app (wireless capability varies by country) The highest SAR value: 1.11 W/kg

Sound System

Speakers: 2.3 cm, 1 W
Microphone: Internal MEMS microphone

Power Supply

Power Source: Rechargeable lithium-ion battery (2,100 mAh, 7.6 Wh) USB Power Delivery (PD) (Output voltage: 4.8 V to 5.2 V, Output current: 1.5 A or greater)
Power Consumption: 6 W
Battery life for continuous use: 3-4 hours
Battery charge time: 3-5 hours

Size/Weight

Dimensions

Width: 343 mm (13-1/2")
Height: 38 mm (1-1/2")
Depth: 97 mm (3-13/16")
Weight: 0.5 kg (1 lb 2 oz)

Packing Box

Width: 420 mm (16-9/16")
Height: 90 mm (3-9/16")
Depth: 165 mm (6-1/2")

Included accessories: USB-C to USB-C cable, dedicated MIDI Converter Cable, Quick Operation Guide, Safety Guide
Dedicated Software: SEQTRAK app
Sequencer Block - Maximum Steps: 128

Notes: Originally designed as a percussion voice, the Incus Iteritas Alia also lends itself well to FM synth sounds, combining deep internal modulation with user-friendly front panel controls.

Supplier's Notes:
Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Incus Iteritas Alia

FM-based wave-mangling additive voice for synthetic percussion and instruments on a swappable oscillator platform

Incus Iteritas Alia is a new member of the Iteritas family, hammering big and bold sounds into your patches. Incus started as a percussion voice, and evolved into so much more: create kicks for any genre, snares, and metallic hits, or go melodic and create FM plucks, analogue-style basslines, and so much more. Incus uses a combination of waveshaping, saturation, wavefolding, FM, and additive synthesis, plus a slew of internal modulation, all behind easy-to-use parameters perfect for jamming.

IIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Incus Iteritas Alia

FM-based wave-mangling additive voice for synthetic percussion and instruments on a swappable oscillator platform

Incus Iteritas Alia is a new member of the Iteritas family, hammering big and bold sounds into your patches. Incus started as a percussion voice, and evolved into so much more: create kicks for any genre, snares, and metallic hits, or go melodic and create FM plucks, analogue-style basslines, and so much more. Incus uses a combination of waveshaping, saturation, wavefolding, FM, and additive synthesis, plus a slew of internal modulation, all behind easy-to-use parameters perfect for jamming.

IIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Proudly digital oscillator inspired by the last millennium on a swappable oscillator platform.

Ataraxic Iteritas Alia is a voltage-controlled and proudly digital oscillator based roughly on the original Ataraxic Translatron. Now brought to the Alia platform and beefed up with a suboscillator and performable hold button, it's back and ready to make some killer basslines or glitchy madness. Sound starts with waveshaped bit tables that are amplitude modulated, folded, and distorted by the CV-controllable front panel controls. Ataraxic is ripe for sound design and exploration: a wide range of bright, digital timbres are readily available, and tuning below audio rates creates wonderfully unexpected textures. Guaranteed to make the fax machine jealous.

AIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Ataraxic Iteritas Alia

Proudly digital oscillator inspired by the last millennium on a swappable oscillator platform

Ataraxic Iteritas Alia is a voltage-controlled and proudly digital oscillator based roughly on the original Ataraxic Translatron. Now brought to the Alia platform and beefed up with a suboscillator and performable hold button, it's back and ready to make some killer basslines or glitchy madness. Sound starts with waveshaped bit tables that are amplitude modulated, folded, and distorted by the CV-controllable front panel controls. Ataraxic is ripe for sound design and exploration: a wide range of bright, digital timbres are readily available, and tuning below audio rates creates wonderfully unexpected textures. Guaranteed to make the fax machine jealous.

AIA is available on our 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Cursus Iteritas Alia

Dynamically generated wavetable oscillator using orthogonal functions on a swappable oscillator platform

Cursus Iteritas Alia is Noise Engineering's take on a wavetable-inspired additive oscillator. Cursus creates sounds from a dynamically generated wavetable, then gives the user spectral controls to sculpt and modulate. Cursus has three different algorithms, based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. All that math is hidden behind a set of friendly controls that produces an extremely wide variety of harmonic sounds, perfect for melodic sound design. Cursus has long been regarded as the gentlest Iteritas, but if you need some beef and extra low end, try mixing the suboscillator output into your patch.

CIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Neat little interface module to help pad controllers play nicely with Eurorack. Hook up a device like a Launchpad or APC and jam out rhythms with retriggering options, dynamic control and MIDI sync.

Supplier's Notes:
Triggerpad is a dynamic trigger/gate sequencer in eurorack format on only 6hp. A USB MIDI controller with an 8×8 grid like Launchpad or APC is used to display and edit the patterns (see the list of compatible controllers). The user experience is tailored to live performance and detailed composition: dial in simple rhythms or complex polyrhythms, retrigger at audio rate, create dynamic percussions with velocity triggers or use longer pulses to create steppy modulations.

By using USB MIDI controllers that you might already have and maybe not use anymore, we avoid producing more plastic. Give your old gear a second life!

Dimensions & consumption

Width: 6hp
Depth: 39mm
+12V: 120mA (without USB MIDI controller connected)
-12V: 20mA
5V: 0mA
USB MIDI controllers consume up to 150mA on +12V

Connectivity

8 dynamic trigger/gate outputs (0-10V)
USB MIDI Host
Clock in
Clock out
Reset in
Reset out

Compatibility

Launchpad Pro Mk3
Launchpad X
Launchpad Mini Mk3
Launchpad Mini Mk2
Launchpad Pro
Launchpad Mk2
Launchpad S
APC Mini Mk1
APC Mini Mk2

Notes: Following in the tradition of Evolution and Morpheus, LINNAEUS represents yet another Dave Rossum innovation in filter technology.

LINNAEUS is a stereo state variable filter that provides the unique ability to linearly modulate its resonant frequency through zero into negative frequency, while maintaining stability. With extensive voltage control of nearly every parameter, Linnaeus lets you manipulate the filter's natural response curve in new ways, to create both subtle and dramatic timbral effects. And with a "one-knob-per-parameter" interface, LINNAEUS inspires sonic creativity that invites (and rewards) real-time interaction.

LINNAEUS's cutoff/resonant frequency is exponentially voltage controllable from sub-audio to ultrasonic frequencies, while its resonant gain (Q) is exponentially voltage controllable from 0dB to greater than 60dB.

LINNAEUS's channel output response characteristics are independently and continuously variable from Lowpass, through Bandpass, Highpass and Notch, to Low and High Shelving characteristics. Voltage control of the response characteristics are independently selectable for each of the two channels.

The linear thru-zero modulation is provided by an integrated modulation oscillator and/or an External Linear FM modulation input.

The voltage-controllable modulation oscillator can track the filter's exponential frequency or operate independently. The modulation oscillator's output waveform is continuously variable from Off through Sine, Triangle, and Sawtooth, to Square. The modulation oscillator output is summed with the external linear FM input and applied to the modulation index VCA, which controls the linear thru-zero modulation index from zero to 8X. The modulation index is, of course, also voltage controllable.

LINNAEUS features include:

- Ultra-wide frequency range, exponentially voltage-controllable from sub-audio to ultrasonic via precise 1V/OCT and attenuverted CV inputs.

- Thru-zero linear frequency modulation via an internal modulation oscillator and/or an external linear FM input.

- Variable linear modulation index, voltage-controllable via an attenuverted CV input.

- Resonance (Q) exponentially voltage-controllable from 0dB to greater than 60dB via 6dB/V and attenuverted CV inputs.

- Continuously variable response characteristics independently selectable for each of the two channels via individual Response Enable controls. Characteristics include Lowpass (12db/oct and 6db/oct), Bandpass, Highpass (12db/oct and 6db/oct), Notch, and Low and High Shelving.

- Voltage control of response characteristics via an attenuverted CV input. Individual Response CV Enable controls let you independently enable or disable CV control of response for each channel.

- An integrated modulation oscillator with continuously variable waveform from Off through Sine, Triangle, Sawtooth and Square. Its frequency can be exponentially voltage controlled via an attenuverted CV input.

- A Track control that lets the modulation oscillator precisely track the filter's exponential frequency.

- Stereo inputs and outputs. LINNAEUS can process a stereo signal or two independent mono signals. While the two channels share the filter's cutoff/resonant frequency, the filter response characteristics can be independently controlled for each channel.

- The solid, high-quality construction you expect from Rossum Electro-Music.

What's with the egg?

The functional description above describes LINNAEUS as originally conceived and designed by Dave. However, late in the beta testing process, Rossum's tester, Chris Meyer, raised the possibility of alternative behavior that would let LINNAEUS function as a self-contained (i.e., no input required) stereo oscillator and/or FM percussion voice with some really powerful timbral capabilities.

While Rossum were initially hesitant to try to shoehorn the new functions into the existing interface, once Dave had prototyped them, it was clear to us all that they were just too cool not to include. So, Rossum have provided them in the form of alternate firmware accessed by pressing and holding the Egg button.

LINNAEUS is 16HP wide and 25mm deep.

Power requirements (max): 155mA +12V, 36mA -12V. Reverse polarity protected.

Notes: High-end amps and effects from vintage to modern with advanced flexibility

With the new GT-100 Version 2.0 update, BOSS' high-end multi-effects processor is now even more powerful than before, adding a host of great new features to its already formidable arsenal. Two new amp types are included, along with cutting-edge MDP effects, an acoustic guitar simulator, and an improved rotary effect. A convenient Guitar-to-MIDI function is on board as well, letting you connect to a computer to play soft synths and input MIDI note using your normal guitar. The GT-100's USB audio capabilities have been expanded too, providing greater flexibility for re-amping applications. And with the BOSS TONE STUDIO software, you can now edit GT-100 patches from a friendly graphical interface on your computer.

Advanced COSM Amps: Beyond Vintage

With its next-generation COSM processor, the GT-100 ushers in a new era of expression and sonic capabilities. Recreating the meticulous details of vintage amps and how they behave, the GT-100 excels in not only cloning classic amps, but in creating a new world of unimagined tones as well. The Amp Customize function lets you mutate classic amps beyond reality to construct completely new, unimagined sounds!

Simple and Intuitive User Interface

The GT-100's unique dual-LCD and eight-knob user interface provides fast access and intuitive control. There are no menus to navigate; every function is instantly available. The tone-customizing functionality has been improved as well-all patches, amps, and overdrives/distortions can be created from scratch and/or customized with the friendly graphical Tone Grid.

New Tonal Possibilities with the Accel Pedal

A new dimension of expression is available with the Accel pedal, which enables control of multiple parameters simultaneously, as well as time-variant effects such as Feedbacker, S-Bend, Twist, and more. Experiment with creative combinations of parameters and bring dynamic new sounds to your performances by interacting in real time with this cool pedal.

A/B Channel Divider Function

Another notable feature in the GT-100 is the versatile A/B Channel Divider. This lets you assign different amps and effects to each channel, either for blending together or switching between them with a footswitch. Going even further, you also have the ability to switch channels by playing strength or frequency range. With each channel capable of driving its own effects and amps settings, the range of tones gets wider and wilder! You can assign smooth, mild lead tones to the mid-to-high pitches, for example, and heavy, cutting tones to the lower notes-the tonal possibilities are endless.

Edit and Organize Sounds with BOSS TONE STUDIO

Available as a free download for Mac or Windows, BOSS TONE STUDIO gives you an intuitive graphical interface for creating and editing GT-100* effects patches from your computer via USB. The software also makes it easy to organize and archive patches, and to load them as needed for different gigs and recording sessions. If your computer has Internet access, BOSS TONE STUDIO provides an integrated connection to the BOSS TONE CENTRAL website, where you can preview and download free gig-ready patches created by top guitar pros directly into the GT-100.

*GT-100 Version 2.0 software is required for compatibility with BOSS TONE STUDIO.

BOSS TONE CENTRAL: Your Web Home for Free Patches, Instructional Vids, Artist Tips, and More

BOSS TONE CENTRAL is the ultimate destination for all players that use BOSS products. Evolving to include a growing selection of BOSS gear, this site gives you access to lots of premium content, including demo videos and free patches created by famous guitarists, touring pros, and session players.

Specs

AD Conversion: 24 bits + AF method

*AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (S/N) ratio of the A/D and D/A converters.
DA Conversion: 24 bits
Sampling Rate: 44.1 kHz
Program Memories: 400: 200 (User) + 200 (Preset)

Effect Type:

COMP, PREAMP(*1), OD/DS(*2), EQ, FX1/FX2(*3), DELAY, CHORUS, REVERB, PEDAL FX, NS1/NS2, ACCEL FX

*1 PREAMP
NATURAL CLEAN, FULL RANGE, COMBO CRUNCH, STACK CRUNCH, HiGAIN STACK, POWER DRIVE, EXTREME LEAD, CORE METAL, JC-120, CLEAN TWIN, PRO CRUNCH, TWEED, DELUXE CRUNCH, VO DRIVE, VO LEAD, MATCH DRIVE, BG LEAD, BG DRIVE, MS1959 I, MS1959 I+II, R-FIER VINTAGE, R-FIER MODERN, T-AMP LEAD, SLDN, 5150 DRIVE, BGNR UB METAL*, ORNG ROCK REVERB*, CUSTOM

*2 OD/DS

MID BOOST, CLEAN BOOST, TREBLE BOOST, CRUNCH, NATURAL OD, WARM OD, FAT DS, LEAD DS, METAL DS, OCT FUZZ, A-DIST*, BLUES OD, OD-1, T-SCREAM, TURBO OD, DIST, RAT, GUV DS, DST+, METAL ZONE, '60S FUZZ, MUFF FACE, CUSTOM

*3 FX1/FX2

T.WAH, AUTO WAH, SUB WAH, ADV. COMP, LIMITER, SUB OD/DS, GRAPHIC EQ, PARA EQ, TONE MODIFY, GUITAR SIM., AC.GUITAR SIM*, SLOW GEAR, DEFRETTER, WAVE SYNTH, SITAR SIM., OCTAVE, PITCH SHIFTER, HARMONIST, OVERTONE*, SOUND HOLD, AC. PROCESSOR, PHASER, FLANGER, TREMOLO, ROTARY1, ROTARY2*, UNI-V, PAN, SLICER, VIBRATO, RING MOD., HUMANIZER, 2X2 CHORUS, SUB DELAY, TERA ECHO*

*Newly Added Features (Version 2.0)
A-DIST is available in OD/DS and in SUB OD/DS of FX2.
OVERTONE and TERA ECHO are only available in FX2.

Nominal Input Level
INPUT: -10 dBu
RETURN: -10 dBu
AUX IN: -20 dBu

Input Impedance
INPUT: 1 M ohm
RETURN: 100 k ohms
AUX IN: 47 k ohms

Nominal Output Level
OUTPUT: -10 dBu/+4 dBu
SEND: -10 dBu

Output Impedance
OUTPUT: 2 k ohms
SEND: 2 k ohms

Dynamic Range: 100 dB or greater (IHF-A)
Displays: Graphic LCD (132 x 64 dots, backlit LCD) x 2

Connectors
INPUT jack (1/4-inch phone type)
AUX IN jack (Stereo miniature phone type)
OUTPUT L/MONO, R jacks (1/4-inch phone type)
PHONES jack (Stereo 1/4-inch phone type)
EXT LOOP jacks (SEND, RETURN; 1/4-inch phone type)
AMP CONTROL jack (1/4-inch phone type)
SUB CTL1, 2/SUB EXP jack (1/4-inch TRS phone type)
USB port
MIDI connectors (IN, OUT)
DC IN jack

Power Supply: DC 9 V
Current Draw: 600 mA

Accessories:
AC adaptor(PSB-1U + AC Cord Set)
USB Cap
Owner's Manual

Options (sold separately)

Footswitch: FS-5U
Dual Footswitch: FS-6, FS-7
Expression Pedal: FV-500L/500H, EV-30, Roland EV-5
AC adaptor (PSB-1U)

*When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be used, and the voltage supplied there.
(PSB-120/PSB-120TW/PSB-230EU/PSB-230UK/PSB-240A)

Size & weight

Width: 542 mm / 21-3/8 inches
Depth: 271 mm / 10-11/16 inches
Height: 80 mm / 3-3/16 inches
Weight: 4.8 kg / 10 lbs. 10 oz.

Notes: Crafted with the breakthrough design philosophy behind the acclaimed Katana guitar amp series, the Katana-110 Bass delivers premium sound and advanced features perfectly tuned for the needs of serious bassists. Three unique amp characters and onboard BOSS effects provide a wide range of tones, backed by a stage-ready, 110-watt class AB power amp, custom 10-inch woofer, and tweeter with on/off switch. And with comprehensive EQ, flexible connectivity, and more, the Katana-110 Bass is ready to take on any playing situation, from stage to studio to everyday practice at home.

Refined Tone And Authoritative Power

The Katana-110 Bass brings you high-performance amplification fuelled by decades of BOSS knowledge and expertise. Armed with 110 watts of time-tested class AB power, this gig-ready amp provides big volume, punch, and presence and smooth, natural drive as you turn up the gain. Three unique preamp types are also available-each with a powerful three-way Shape switch to fine-tune the character-so you'll always have the perfect sound for any style or genre.

Vintage-A classic tube voice with organic tone and natural drive.
Flat-Smooth, clear, and dynamic tone with rich harmonic character.
Modern-Quick dynamic response with extended bass range.

Command The Stage

With its custom-designed speaker system and rock-solid combo cabinet, the Katana-110 Bass produces a commanding voice to drive your band in any musical situation. The fundamental tone of the 10-inch woofer is complemented with a tweeter for high-frequency definition that's ideal for slap and other modern playing styles. Our efficient bi-amp design delivers clear and balanced sound, and the tweeter can be turned off with a panel switch for a more traditional bass tone if desired.

Four Independent Effects Sections

The Katana series is famous for its onboard BOSS effects, and the Katana-110 Bass is no exception. Dedicated comp/limiter and drive sections provide core processing, while FX1 and FX2 offer a treasure trove of options from the BOSS bass effects library, from standards like chorus and flanger to octave, bass synth, and more. The FX2 section also includes delay and reverb, and over 60 total effect types are available for loading via the BOSS Tone Studio editor.

Precision Sound-Crafting Tools

With the intuitive panel controls on the Katana-110 Bass, you can quickly refine your tone in detail. The studio-inspired Blend section lets you mix in some dry signal, which you can pre-shape from the panel with three customizable settings for the optimum tonal fusion. A comprehensive four-band EQ is also on hand, complete with three selectable frequency centres in the low-mid and high-mid bands.

Rich Performance Versatility

The flexible Katana-110 Bass is your perfect partner for any live gig. Six Tone Setting memories are available for storing and recalling the sounds you create, including preamp type, EQ, Blend, and effect settings. You can switch memories from the panel and go even further with optional footswitches, an expression pedal, and the GA-FC Foot Controller. There's also a balanced XLR output for connecting to a house PA, along with a switch to select between direct, pre, or post signals.

Recording And Practice Powerhouse

The Katana-110 Bass is equally suited for studio recording and home playing. The compact footprint takes up minimal space, and the variable Power Control lets you dial up cranked-amp tones at family-friendly volume levels. A headphones/recording jack provides a direct output with effects and mic'd cab emulation with three Air Feel settings, while USB lets you interface with computer production software and track with great tone.

Specifications
Output Power: 60 W continuous (RMS), 110 W peak
Nominal Input Level: INPUT: -10 dBu (1 M ohm), POWER AMP IN: -10 dBu (20 k ohms), AUX IN: -10 dBu (20 k ohms), RETURN IN: -10 dBu (100 k ohm)
Speaker:
WOOFER: 25 cm (10 inches) x 1
TWEETER: x 1
Controls: POWER switch, MASTER VOLUME knob, POWER CONTROL switch (STANDBY, 1 W, MAX), TWEETER button

[INPUT EFX]: COMP button, DRIVE button, COMP knob, DRIVE knob

[AMPLIFIER]: PAD button, SHAPE button, TYPE knob (VINTAGE, FLAT, MODERN), GAIN knob, VOLUME knob

[BLEND]: BLEND button, DRY LEVEL knob

[EQUALIZER]: LOW MID button, HIGH MID button, BASS knob, LOW MID knob, HIGH MID knob, TREBLE knob

[EFFECTS]: FX1 button, FX2 button, TAP button, FX1 knob, FX2 knob

[TONE SETTING]: CH1 button, CH2 button, CH3 button, PANEL button

[BALANCED OUT]: GND LIFT switch (OFF, ON), SELECT (POST, PRE, DIRECT)
Indicators: COMP, DRIVE, PAD, SHAPE, BLEND, LOW MID, HIGH MID, FX1, FX2, TAP, CH1, CH2, CH3, PANEL, TWEETER

Connectors:
INPUT jack: 1/4-inch phone type
POWER AMP IN jack: 1/4-inch phone type
BALANCED OUT jack: 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
REC OUT/PHONES jack: Stereo 1/4-inch phone type
EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
GA-FC jack: 1/4-inch TRS phone type
AUX IN jack: Stereo miniature phone type
USB port: USB B type
BLUETOOTH ADAPTOR SLOT: Bluetooth Audio MIDI Dual Adaptor
AC IN jack
Power Consumption: 77 W
Accessories: Owner's manual, Power cord, GA-FC sticker

Options (sold separately): Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
GA FOOT CONTROLLER (GA-FC)
Bluetooth Audio MIDI Dual Adaptor (Model BT-DUAL)

Size & weight
Width: 470 mm / 18-9/16 inches
Depth: 300 mm / 11-13/16 inches
Height: 500 mm / 19-11/16 inches
Weight: 16.8 kg / 37 lbs 0.6 oz

Notes: Updated version of Boss's popular Katana amp, here in 100W combo incarnation. Designed with versatility in mind, the Katana offers five core amp characters, effects and Tube Logic valve emulation.

Supplier's Notes:
Katana MkII takes the acclaimed Katana guitar amp series to the next level, turbocharging the core platform with more sounds, more effects, and more features. Newly voiced variations are now available for all five amp characters, doubling the tonal options. And the onboard effects categories have been expanded from three to five, providing even more real-time processing to choose from. The usability has been ramped up too, with a power amp input for modelers and multi-FX, easy stereo expansion for dual amp setups, updated editor software, and many other enhancements.

More Sounds, More Versatility

The stage-class Katana MkII lineup picks up where the first generation left off, building on the same core tones and features that have made the series such a worldwide smash. If you loved the original Katana amps, you'll love Katana MkII even more. And if you're new to the party, get ready for sound, feel, and versatility that soars far beyond its price class.

Five Amp Characters, Ten Overall Tones

Katana MkII's five primary amp characters offer everything from organic vintage tones to modern high-gain sounds, plus a dedicated voice optimized for acoustic-electric guitar. The characters have now been extended with newly voiced variations, providing a wider palette of tone options to craft your personal sound.

Five Effects At Once

Katana MkII now includes five simultaneous effects categories, putting the tone-shaping power of a massive pedalboard right inside your amp. Independent Booster, Mod, FX, Delay, and Reverb sections come loaded from the factory with three variations in each, providing 15 ready-to-play effects to choose from. Connecting to BOSS Tone Studio lets you dive much deeper if you want-customize the sections with over 60 different effect types, change the order with four different chains, and much more.

Full-Throttle Sound Every Time You Plug In

Backed by BOSS's Tube Logic approach, Katana MkII delivers the authentic output distortion characteristics of genuine tube amplifiers, with the sound and feel becoming richer and more responsive as you turn up the volume. But unlike that classic tube amp, Katana MkII's variable Power Control makes it easy to fly in the sweet spot without getting fired from the gig or kicked out of the house. Just throttle back the overall volume as needed to enjoy inspiring, cranked-amp sound anywhere you play, from bedroom to stage.

Amplify Your External Gear

The Katana-100 MkII rocks as a standalone amp, but it also excels as a powered cabinet for a favourite preamp, modeler, or multi-effects unit. Connecting to the rear-panel Power Amp In jack bypasses Katana MkII's preamp and effects, letting you tap straight into the Tube Logic power section, complete with grab-and-go Power Control. And with BOSS Tone Studio, the input can be easily optimized for your particular gear with a high-pass filter and adjustable gain.

One-Touch Recall Of Custom Setups

One of the Katana-100 MkII's most powerful features is the ability to store favourite amp character and effects setups in Tone Setting memories for instant recall. After you've dialled in a sound with the panel controls, simply save it to the desired memory with a quick button hold. Eight Tone Settings (two banks of four) are available, with fast selection right from the panel. And for hands-free operation on the gig, just connect external footswitches or the GA-FC foot controller.

Specifications

Rated Power Output: 100 W
Nominal Input Level
INPUT: -10 dBu (1 M ohm)
AUX IN: -10 dBu (20 k ohms)
RETURN IN: -10 dBu (100 k ohm)
Speaker: 30 cm (12 inches) x 1
Controls: POWER switch, MASTER knob, PRESENCE knob, POWER CONTROL switch (STANDBY, 0.5 W, 50 W, 100 W)
[AMPLIFIER] VARIATION button, AMP TYPE knob (ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN), GAIN knob, VOLUME knob

[EQUALIZER]: BASS knob, MIDDLE knob, TREBLE knob

[MULTI EFFECT]: BOOSTER button, MOD button, FX button, DELAY button, REVERB button, TAP button, BOOSTER knob, MOD knob, FX knob, DELAY knob, REVERB knob

[TONE SETTING] CH1 button, CH2 button, CH3 button, CH4 button, PANEL button

[STEREO EXPAND] STEREO EXPAND switch
Indicators: VARIATION, ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN, BOOSTER, MOD, FX, DELAY, REVERB, TAP, CH1, CH2, CH3, CH4, PANEL

Connectors
INPUT jack: 1/4-inch phone type
POWER AMP IN jack: 1/4-inch phone type
LINE OUT jack: 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
REC OUT/PHONES jack: Stereo 1/4-inch phone type
EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
GA-FC jack: 1/4-inch TRS phone type
AUX IN jack: Stereo miniature phone type
USB port: USB B type
AC IN jack
Power Consumption: 77 W
Accessories: Owner's manual, Power cord, GA-FC sticker

Options (sold separately) Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
GA FOOT CONTROLLER (GA-FC, GA-FC EX)
Amplifier Stand: BAS-1

Size & weight

Width: 530 mm / 20-7/8 inches
Depth: 248 mm / 9-13/16 inches
Height: 484 mm / 17-1/2 inches
Weight: 14.8 kg / 32 lbs 11 oz

Notes: A unique analogue percussion module, based on principles from the legendary 909 twisted into new sonic territory. Capable of everything from classic kicks and snares to more experimental hits and complex VCO effects.

Supplier's Notes:
A machine is born

The Machine began as a quest to create a rich-sounding eurorack snare drum synthesis module to complement the existing Mutant Drums. The project quickly became too large and costly to justify the module being capable only of snare drum sounds. So, the decision was made to learn from the architecture of the TR-909's snare and kick circuits, in order to develop a module capable of generating multiple forms of analogue percussion, and various other effects.

Like the other Mutant Drums, the Machine has its roots in classic analogue percussion synthesis. Even though it can create totally alien sounds, it still has the capability to deliver those classic 909 house snares and kicks if you want them. There are no microcontrollers in the Machine. The signals and waveforms are all generated by discrete components and ICs, for a distinctly analogue sound, and user experience.

Features

Microcontroller-free analogue percussion synthesis engine
Unique Inverter Core oscillators form the MEMBRANE. Each analogue oscillator has three waveforms to select from
Capable of synthesizing everything from heavy-hitting bassdrums to classic 909-style snares and other complex timbres
Modular design gives the Machine many auxiliary purposes, great for modular sound design of many varieties, and not just percussion
The SNAPPY section is comprised of a voltage controlled noise oscillator, for modelling the noisy part of drum timbres
Both MEMBRANE and SNAPPY elements have an external input for replacing the built-in sound sources, opening up many avenues of possibility
13 control voltage and audio inputs, for a fully modular drum experience
7 audio and CV/gate outputs for maximum integration with other modules
Dedicated outputs for each WAVE and NOISE oscillator mean you can use the Machine as a complex VCO in your system, when not synthesizing percussion
Waveform scanning feature generates complex timbres from analog waveforms
The MEMBRANE's waveforms can be scanned through automatically by the wavescanner's voltage controlled clock generator, or an external clock or VCO can be used
SCAN FREQ CV forms a unique form of timbre control, making the Machine act like a complex oscillator at its WAVES output
The ENABLE input allows you to gate the wavescanner on and off with a CV or gate signal

Technical specifications

Width: 29HP | Depth: 30mm
Current draw: +139mA, -115mA @ 12V

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


One of our favourite DJ turntables. Clearly inspired by the classic Technics SL-1200 but clocking in at a more affordable price point. Direct drive motor, decent build quality and a few nice bonus features like adjustable pitch range.

Supplier notes:
The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal 1/2"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable and supplies a strong 5.5 mV output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Second-generation version of Boss's excellent looper gives you five stereo tracks, four simultaneous effects, hands-on control and full MIDI support. Ideal for live use but also a creative studio tool.

Supplier's Notes:
Looping Magic at Your Fingertips

Packed with inspiring tools for on-the-spot music creation, the RC-505mkII brings next-generation power and flexibility to the world's most popular tabletop looper. Elevate your performances with five stereo tracks and four simultaneous Input FX and Track FX, and soar even further with customizable buttons, expanded I/O, increased mixing control, and other enhancements requested by long-time RC-505 users. Built for free-flowing expression on stage and in the studio, the RC-505mkII is a dream machine for beatboxers, vocalists, multi-instrumentalists, and other fearless looping artists.

More to Love

The RC-505mkII retains everything that made the original so loved and adds a wealth of new features to make the looping experience even more creative and free flowing. The faders provide longer throw for finer adjustments, and they also have a more solid feel under the fingers. And each track now has dedicated FX and Track buttons, making it easier to colour and control your loops in the heat of the moment. Undo/redo has also been enhanced with a Mark Back function that lets you instantly jump back to a previous loop state while performing.

Customize Your Workflow

While the original RC-505 was very customizable, the RC-505mkII takes things to the next level with a vast range of user-configurable controls. You can assign various CTL parameters to the FX and Track buttons and trigger them with a press, hold, or double-click. Pressing the Undo/Redo button reveals a secondary layer, doubling your options. Two external control jacks are also available for connecting footswitches or expression pedals, and each has its own dedicated set of parameters. Crave even more? Then tap into the Assign screens to set up 16 different targets for hardware control and MIDI operation.

More Sonic Colours for Inspired Looping

Sonic variations help make loop performances more compelling, and the RC-505mkII provides a greatly expanded FX palette to colour your sounds during recording and playback. There are 49 Input FX and 53 Track FX types to choose from-including powerful new vocal harmony effects-and you can use up to four in each section at once. Going further, groups of four Input FX and Track FX can be stored in four banks for quick recall, along with toggle or momentary button settings for each type. A step sequence function is also available in some FX to automate parameter changes for dynamic real-time movement.

SPECIFICATIONS

Sampling Frequency: 44.1 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point

Recording/Playback
Number of Tracks: 5
Data Format: WAV (44.1 kHz, 32-bit float, stereo)
Maximum Recording Time: Approx. 1.5 hours (1 track), Approx.13 hours (total of All memories)

Rhythm Type: 200 types or greater
Rhythm Kit: 16 types

Effect:
INPUT FX: 49 types
TRACK FX: 53 types
MASTER FX: 2 types
Memory: 99
Nominal Input Level: MIC 1, 2 INPUT: -40 dBu/INST 1, 2 INPUT: -10 dBu
Maximum Input Level: MIC 1, 2 INPUT: 0 dBu/INST 1, 2 INPUT: +7 dBu/+20 dBu (selectable)
Input Impedance: MIC 1, 2 INPUT: 3k ohms/INST 1, 2 INPUT: 1 M ohms/25 k ohms (selectable)
Nominal Output Level: MAIN OUTPUT: -10 dBu/SUB 1, 2 OUTPUT: -10 dBu
Maximum Output Level: MAIN OUTPUT: +7 dBu/SUB 1, 2 OUTPUT: +7 dBu
Output Impedance: MAIN OUTPUT: 1 k ohm/SUB 1, 2 OUTPUT: 1 k ohm
Recommended Load Impedance: MAIN OUTPUT: 10 k ohms or greater/SUB 1, 2 OUTPUT: 10 k ohms or greater

Controls:
TRACK1--5 REC/PLAY button, TRACK1--5 STOP button, TRACK1--5 TRACK button, TRACK1--5 FX button, ALL START/STOP button, UNDO/REDO button, TAP TEMPO button, RHYTHM START/STOP button, RHYTHM EDIT button, INPUT FX A--D button, INPUT FX EDIT button, TRACK FX A--D button, TRACK FX EDIT button, MENU button, LOOP button, ENTER button, EXIT button, PAGE buttons, 1--4 knobs, OUTPUT LEVEL knob, TRACK1--5 LEVEL Faders

Display:
Graphic LCD (128 x 64 dots, backlit LCD)

Connectors:
MIC IN 1, 2 jack: XLR type (balanced, phantom power: DC 48 V, 10 mA Max
INST IN 1, 2 jacks, MAIN OUT jacks, SUB OUT 1, 2 jacks: 1/4-inch phone type
PHONES jack: Stereo 1/4-inch phone type
CTL1,2/EXP1 jack, CTL3,4/EXP2 jack: 1/4-inch TRS phone type
USB port: USB B type
MIDI (IN, OUT) connectors
DC IN jack

Power Supply: AC adaptor
Current Draw: 1.0 A (with phantom power), 0.9 A (without phantom power)
Accessories:

AC adaptor
Owner's Manual
Leaflet "USING THE UNIT SAFELY"

Options (sold separately):
Footswitch: FS-5U
Dual Footswitch: FS-6, FS-7
Expression Pedal: FV-500H, FV-500L, EV-30, Roland EV-5

SIZE AND WEIGHT

Width: 420 mm/16-9/16 inches
Depth: 234 mm/9-1/4 inches
Height: 67 mm/2-11/16 inches
Weight: 1.8 kg/4 lbs

Notes: Stereo oscillator with wavemorphing, folding, and PM

"We may have just gotten the perfect Noise Engineering oscillator - in the most compact package possible." -- CDM Blog

Sinc Legio is a simple oscillator with some tricks up its proverbial sleeve. If you need some basic waveforms, Sinc has you covered - and it makes it easy to spice up those waveforms with phase modulation, wavefolding, or hard sync. Sinc pairs well with other oscillators in your system, too: hard-sync and stereo PM inputs make complex sounds easy to patch. Combine broad-ranging timbral parameters with a vintage-inspired chorus, and you're well on your way to stereo sound-design heaven in just 6 HP.

Sinc's multiple algorithms give a world of timbral possibility at the flip of a switch. Phase modulation, plucky FM, and bright and heavy modulation await. And on top of that, Noise Engineering have added a wavefolder to it. Shape and fold to your heart's content in Fold mode.

Not only is Sinc an incredible oscillator on its own, it's also part of the Legio platform. Use the included USB cable to connect to the Customer Portal and swap the firmware to any other Legio firmware, completely free, at any time. Let that sinc in!

6HP Eurorack
+12v: 140mA
-12v: 22mA
Sinc - from Latin: "treasure"

Legio - from Latin: "legion, army"

"A lot of treasure"

Notes: Stereo oscillator with wavemorphing, folding, and PM

"We may have just gotten the perfect Noise Engineering oscillator - in the most compact package possible." -- CDM Blog

Sinc Legio is a simple oscillator with some tricks up its proverbial sleeve. If you need some basic waveforms, Sinc has you covered - and it makes it easy to spice up those waveforms with phase modulation, wavefolding, or hard sync. Sinc pairs well with other oscillators in your system, too: hard-sync and stereo PM inputs make complex sounds easy to patch. Combine broad-ranging timbral parameters with a vintage-inspired chorus, and you're well on your way to stereo sound-design heaven in just 6 HP.

Sinc's multiple algorithms give a world of timbral possibility at the flip of a switch. Phase modulation, plucky FM, and bright and heavy modulation await. And on top of that, Noise Engineering have added a wavefolder to it. Shape and fold to your heart's content in Fold mode.

Not only is Sinc an incredible oscillator on its own, it's also part of the Legio platform. Use the included USB cable to connect to the Customer Portal and swap the firmware to any other Legio firmware, completely free, at any time. Let that sinc in!

Notes: Dtronics DT-1000, A hardware controller for the Roland Boutique D-05 and D-50/D-550

The Dtronics DT-1000 is a hardware controller for the Roland Boutique D-05 and D-50/D-550.

The DT-1000 can also be operated on a vintage Roland D-50 / D-550

Almost every parameter of the Roland D-05 gets its own slider, 10 keys and 56 pots in a nice and solid desktop case.

Some pots are doubly assigned, but can be switched quickly and are very easy to read.

For Roland Boutique D-05 Linear Synthesizer
Also compatible with Roland D-50 and D-550 vintage synthesizers
Direct access to all important parameters of the Roland Boutique D-05
10 Buttons and 56 pots
Robust housing
MIDI input and output
USB

Included in the box:
Dtronics DT-1000
DIN(5) MIDI cable
USB cable


Specifications
Material: high-quality plastic
Height: 44 mm
Width: 300 mm
Depth: 200 mm
Weight: 0.985 gram
DIN cord (DIN5P) is included
Power consumption USB or DIN: 60mA