Search dance music

Notes: The CTRL Case One is a super lightweight and compact carrying solution for your Rane One Controller. The case is crafted from lightweight Durashock molded EVA foam and water repellent polyester exterior. The lid is lined with high density egg-crate foam to protect the display, jog wheels, and controls.

Fits:

Rane One

Basics:

Lightweight Durashock molded 8 mm EVA foam and polyester exterior shell
Sturdy zipper
Incl. high density egg foam to protect knobs, faders, jog wheels and display
Comfortable, rivet reinforced carrying handles
Including detachable shoulder strap (metal buckles)

Specs:

Outer measures: 75 x 41 x 11 cm
Inner measures: 71 x 35 x 8 cm
Weight: 1,9 kg

Notes: Module A-130-8 contains eight linear voltage controlled amplifiers (VCAs). Each VCA features a control voltage input (CV), a signal input (In) and a signal output (Out). In addition three mixers are included: the socket labelled "1-4" outputs the sum of the VCAs 1-4, the socket labelled "5-8" outputs the sum of the VCAs 5-8, the socket labelled "1-8" outputs the sum of all eight VCAs.

The signal inputs are able to process levels up to 10Vpp without clipping. Each CV input is equipped with a trimming potentiometer that is used to adjust the sensitivity of the CV input in question. In the factory the module is adjusted for the CV range 1...+5V but can be re-adjusted by the user for other control voltage ranges (e.g. 0...+10V).

The amplification range for each single VCA is 0...1. The signals of the sum outputs have a lower amplification to avoid distortion.

The VCAs and mixers are fully DC coupled, i.e. the module can be used for the processing of both audio and control voltage signals. The control voltage and signal inputs can be normalled by means of small solder pads (e.g. 1 > 2 > 3 > 4 and so on, or 1 > 5, 2 > 6, 3 > 7, 4 > 8 for the stereo application mentioned below).

Typical applications:

Any kind of VCA application (e.g. voltage controlled attenuation of audio or control voltage signals)
Two voltage controlled mixers with four channels each
Voltage controlled stereo mixer with four channels each, for this the control voltage inputs have to be correspondingly patched or internally normalled: CV1=CV5 / CV2=CV6 / CV3=CV7 / CV4=CV8
Voltage controlled mixer with eight channels
Add-on for the planned Joystick module A-174-4

Dimensions
6 HP
40 mm deep

Current Draw
50 mA +12V
50 mA -12V
0 mA 5V

Notes: Famous for its noiseless clean sustain, the Philosopher's Tone has staked its claim in the crowded world of compressor pedals. In addition to Volume and Sustain controls, the Philosopher's Tone features a parallel Blend knob that allows the musician to mix their instrument's original tone with the compressed sound effect. This technique restores natural pick-attack and allows more extreme sustain settings to remain musical. The Treble control provides up to a 6db cut or boost at 2kHz for fine-tuning the frequency response of the effect. The Philosopher's Tone features true-bypass switching and internal 18V power rails for maximum clean headroom, even when used with hot pickups and line level signals.

Knob-by-knob

Volume: Sets the overall output volume.
Sustain: Sets the amount of sustain.
Treble: Boosts or cuts treble at 2kHz.
Blend: Mixes your compressed effect with your clean signal.

Rare design

Generations of guitar players have sought noiseless clean sustain from a compressor, and this was the guiding goal of the research and design behind Philosopher's Tone, yielding a compressor with an internal 18 volts of headroom and naturally musical tone control.

Modern-day alchemy
Practitioners of the mystical and ancient art of alchemy long sought an element called the Philosopher's Stone. They believed, if found, it could turn lead into gold and bestow immortality upon the person who wielded it. Turns out it was waiting in the depths of space all along.

Specifications

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: High
Output impedance: 150ohms

Body

Length: 1.5"
Width: 3.75"
Height: 1.75"
Weight: 0.5 lbs

Notes: Octava is an all-analog octave fuzz / frequency doubler featuring an on-board low pass Filter control that allows you to achieve singing octave up tones anywhere on the neck, without adjusting your guitar's tone control. A front-end Drive and gushing Fuzz circuit add signal power and easily convert Octava to shoegazey fuzz pedal capable of producing devastating, full-wave rectified distortion. Use the Blend knob to mix the octave up effect on top of your dialed-in drive.

Knob-by-knob

Volume: Sets the overall output volume.
Blend: Mixes in the octave-up effect.
Filter: A low-pass filter tone knob. Sets the cutoff frequency of the low pass filter on the input of the Octave circuit.
Drive: Mixes in warm front-end overdrive by increasing the gain of the J-FET preamp stage.
Fuzz: Activates the fuzz circuit.

All analogue, still versatile

Built with the theory of "do one thing and do it well" paired with the flexibility of more diverse effects units, the Octava transitions seamlessly between a singing octave-up to an overflowing fuzz, and every blended tone between.

The Octavia ribbons

Parallel ribbons made up of complex patternwork wave ever-so-slightly in the blackness of space. It is from this mysterious place Octava was harvested. Pretty much sounded like a badass octave fuzz.

Specifications

Electronics

Voltage: 9-18VDC
Current draw: 100mA
Input impedance: 2.2M
Output impedance: 150 ohms

Body

Length: 1.5"
Width: 3.75"
Height: 1.75"
Weight: 0.5 lbs

Notes: Moon Pool is an analog phase shifter and tremolo with independent speed controls featuring the ability to change the rate of one or both of the effects in either direction, corresponding to how hard you play. The 4-stage, VCA-based phaser and variable bias tremolo found in the Moon Pool can each be run as standalone effects or they can be combined in series for a mesmerizing mashup of modulators. A global Depth knob determines overall wetness, while a Sensitivity knob allows you to dial in the responsiveness of these changes to accommodate different playing styles and colors. Runs on standard 9VDC.

Knob-by-knob

Phase Speed: Sets the rate of modulation for the phaser.
Trem Speed: Sets the rate of modulation for the tremolo.
Depth: Sets the intensity of both the phaser and tremolo.
Sens.: Determines how much signal is required to change the speed of both phaser and trem when dynamics processing is turned on.

Trem / Phase (Three-Way Toggle): Up = trem engaged, Center = both engaged, Down = phaser engaged

Phaser Dyn. (Three-Way Toggle): Up = phaser speed increases in response to playing dynamic, Middle = no change, Down = decreases

Trem Dyn. (Three-Way Toggle): Up = trem speed increases in response to playing dynamic, Middle = no change, Down = decreases

Dynamically-responsive, wide-range dual LFOs

Moon Pool features a pair of LFOs that can be independently modulated by the amplitude of your playing. Engaging the dynamics switches enables these LFOs to travel well beyond normal limits, creating wild FM tones at maximum speed and gradually evolving textures when slowed way down. Equal parts out-of-this-world and inherently musical.

Get lost in the slosh

Sometimes, you gotta kick off your moon boots, slip into a moon pool, pour yourself a moon juice, and get lost in the slosh.

Specifications

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: 2.2M
Output impedance: 150ohms

Body

Length: 1.5"
Width: 3.75"
Height: 1.75"
Weight: 0.5 lbs

Notes: Constellator is an all-analog delay pedal capable of producing up to 600ms of lush echo with adjustable modulation and a comprehensive sound palette. From percussive slapback and doubler sounds to chorused-out, long delays with endless repeats, the Constellator's MN3005 bucket brigade chips provide superior overall headroom and tape-like saturation when pushed to the limit. The Feel toggle switch adjusts several parameters simultaneously for an additional coloring of LFO modulation. With the Feedback control maxed out, the Constellator is capable of self-oscillation which can be pitched up or down by turning the Time knob. Runs on standard 9VDC.

Knob-by-knob

Time: Sets your delay time. Clockwise for slower, counter-clockwise for faster.
Mix: Controls your dry/wet balance.
Mod: Controls the modulation depth. Adds color and warp.
Repeats: Sets the amount of feedback in the delay line.
Feel: Selects between two distinct modulation types. When the switch is pushed in, a chorus effect is selected. When the switch is not pushed in, a vibrato effect is selected.

King of bucket brigades

The pair of analog delay chips used in the Constellator are new production replicas of the mighty Panasonic MN3005 Bucket Brigade Devices (BBD) found in some of the most iconic vintage delay pedals of all time. With 4096 individual "buckets" and +15V power rails, the MN3005 provides the longest possible delay time and most available headroom in an analog delay. Luscious.

Make your ow myth

Develop shimmering delay lines with crystalline overtones and watch them scatter across the canvas in your mind. Constellate your own myth into being.

Specifications

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: 10M
Output impedance: 150ohms

Body

Length: 1.5"
1.5
Width: 3.75"
Height: 1.75"
Weight: 0.5lbs

Notes: Hizumitas was designed for the one and only Wata from the legendary experimental band Boris, one of the heaviest bands ever to come out of Japan. The trio of guitar sorceress Wata, drummer and vocalist Atsuo, and double-neck bassist, guitarist and vocalist Takeshi has almost 100 releases filled with genre and brain-melting music.

In their nearly three decades together, Boris has infused doom, hardcore, thrash, noise-core, ambient, free improv, drone, psychedelia, and more into their extensive discography. Boris is also known for their unique collaborations with mutually adventurous artists, including American Doom mongers Sunn O))), noise legends Merzbow, Keiji Haino, and Ian Astbury of The Cult.

Wata, always seen and heard on stage wielding her black Les Paul Custom, mixes killer riffs with searing, fluid, or jaggedly melodic leads and controlled walls of feedback, often with help from an EBow. It's a connection of chaos and melody that has enchanted Boris fans worldwide and influenced many bands that have followed in their considerable wake. Simply stated, no other band sounds like Boris, and no other guitarist rocks like Wata.

But with EQD's Hizumitas fuzz on your pedalboard, you can carve out your own singular, mega-heavy tone.

Hizumitas is a faithful recreation of Wata's go-to distortion pedal, the Elk BM Sustainar. The Elk is a Japanese variant of the very well-known "Triangle" BMP. The designers at EQD tried several vintage BMP's during development, found that each pedal was wildly different and realized that to truly capture the magic they needed the original. Wata graciously sent her beloved pedal halfway around the world, and EQD discovered that it had something special the others didn't have: heavy saturation with a gritty edge and massive bottom while maintaining a clear and dynamic tone with enough mids and top end to cut through any sludge. The studious wizards at EQD have built all of those characteristics into the Hizumitas.

Notes: Hi-fi specialists Grado specialise in rich warm and unique sounding audio equipment.

The Grado DJ100i is built and designed to meet the demanding needs of the professional DJ. These cartridges deliver performance never known before in the pro DJ market. The Grado specially engineered transmission line cantilever allows for the ideal transfer of music signal and for safe and effective stylus back-cueing. The prestige model DJ100i uses a 3-piece otl cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing. For possibly, the most advanced DJ cartridges ever offered to the professional DJ market. This lifetime package includes 2 replacement stylus to ensure the Grado sound can be enjoyed for as long as possible.

Notes: The DJ200i is the premium DJ cartridge from hi-fi specialists grado. Hand engineered for a premium quality, rich, warm and unique sound, the DJ200i is built and designed to meet the demanding needs of the professional DJ. A step above anything else in this price bracket, and many cartridges priced significantly higher.

The grado specially engineered transmission line cantilever allows for the ideal transfer of music signal and for safe and effective stylus back-cueing. The prestige model DJ200i uses a modified 4 piece otl cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing for possibly, the most advanced DJ cartridges ever offered to the professional DJ market.

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Building on the reputation of its award-winning predecessors, the Erisr Studio 5 is a substantial update that delivers richer low-end and more controlled high-frequency response that reproduces every detail in your recordings with a natural sound unparalleled in its class. Designed for superior performance in both home studio and small professional mix rooms, the Eris Studio 5 combines flexible connectivity with sonic accuracy that puts it a class all its own.

The custom-designed EBM (Elliptical Boundary Modeled) waveguide provides superior high-frequency response and wide 100-degree horizontal dispersion to create a broader sweet spot. Narrow vertical dispersion reduces reflections from your desk, and a silk-dome tweeter ensures snappy, accurate transient reproduction. An elegant new enclosure design improves the waveguide performance so you'll hear the finest details in your mix.

The woven-composite low-frequency driver offers Eris' signature tight, clear bass with plenty of punch. Its 80W of biamped power make the Eris Studio 5 more efficient than previous designs. The ported enclosure maximizes bass response and allows the Eris Studio 5 to reach down to an astonishing 48 Hz - without a subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything.

Features

5.25-inch woven composite low-frequency driver
1-inch, ultra-low mass, silk-dome, high frequency driver
Crossover Frequency, 3.5 kHz
100- x 60- EBM waveguide provides a sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
80W, Class AB dual amplification
48 Hz to 20 kHz frequency response
102 dB Peak SPL (@ 1 meter)
Acoustic Tuning Controls:
Acoustic Space (Flat, -2 dB, -4 dB)
High Frequency (+/-6 dB, center 10 kHz, continuously variable)
Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)
Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Inputs:
XLR and 1/4-inch TRS balanced rear-panel inputs
RCA unbalanced rear-panel inputs

Protection:
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
Power Saver mode (engages after 40 minutes)

Set up your studio monitors for your room.

Erisr Studio 5 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonus studio monitors, the Eris Studio 5 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10kO

Performance

Peak SPL: 102 dB (@ 1 meter)

Speakers
Crossover frequency: 3.5 kHz
Coverage pattern: 100 degree (H) x 60 degree (V)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA

Power amplifier type: Class AB

Measurements

Dimensions: 11.50 x 8.00 x 8.80 in

Product depth: 8.78" (22.3 cm)
Product height: 11.5" (29.2 cm)
Product width: 8" (20.32 cm)

Review: ***B-STOCK: Box slightly damaged, slight surface marks, otherwise in perfect working order***


The 1971 classic album by Canadian singer-songwriter Joni Mitchell, Blue is widely thought by many music lovers to be one of the best albums of all time. Already well into her career by the time of its release - it's her fourth album - it was certainly Mitchell's best yet, reflecting a period in her life where she took a break from touring and live performing to focus on creation. Its confessional and poetic lyrics, not to mention the distinctively groggy yet idyllic guitar and piano playing on songs like 'All I Want', 'River', 'A Case Of You', heard Mitchell encapsulate the various milestones, Renaissances and turning points of the contemporary rock landscape of the 1970s, into a singular LP.

Notes: Module A-199 is a spring reverb module. The reverb effect is electronically simulated by means of 3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical properties of the springs like signal delays, audio resonances, limited frequency range, acoustic feedback behaviour, sensitivity to mechanical shocks and others.

The 3-spring system used in the A-199 ensures a "dense" reverb because of the different properties of the three springs.

The A-199 implies some special features that are not self-evident for spring reverb units:

The reverb signal can be fed back to the input using the Feedback control. Even self-oscillation of the springs similar to the self-oscillation of filters is available. The feedback loop can lead even via external modules like VCA, VCF, phaser, frequency shifter, vocoder, distortion/waveshaper, ring modulator and others. In this case the reverb output of the A-199 is connected to the input of the external module(s) and the output of the external module(s) is fed back to the Ext. Feedback In socket of the A-199. This socket contains a switch that interrupts the internal feedback loop as soon as a plug is inserted.

Another feature is the Emphasis control. This enables the adjustment of the accentuation of middle frequencies (around ~ 2kHz).

With the Mix control the relation between original and reverb signal appearing at the mix output is adjusted.

Using all these features very extreme and unusual effects can be generated with the A-199.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The 'Mega Milton' is a smorgasbord of handy all analogue utilities in just 8HP that will greatly extend the functionality of your Eurorack system.

It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analogue white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor.

All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input.

The 'Mega Milton' provides essential classic synthesizer building blocks for patching in any Eurorack system.

Ideal For

Incorporating stereo external sources easily into your Eurorack system.
Signal attenuation and basic mixing in a small space.
Building percussion sounds from an analogue noise source.
Producing clocked random to add interest and variation to patterns and sounds.
Adding gated 303 style slides to patterns.
Creating and Manipulating patterns with Sample and Hold.
Buffering and monitoring voltage across multiple VCOs or other destinations with no drop.

Tech Specs

Supply: +12V 70mA / -12V 70mA
Size: 8HP
Depth: 32mm

Notes: The 8S is an 8 step sequencer in 8 HP with control over some parameters of the sequence as reset, hold, random step and direction. The inputs have been designed to work with clock related signals like triggers or gates but any type of CV signal can be used. The output signal path is completely analog and its range can be set to unipolar (0 to +5 volts) or bipolar (-5 to +5 volts) via jumper on the back of the module.

Technical specifications:

8HP

38 mm depth

Consumption: +12V: 25mA ; -12V: 5mA

Notes: Strom+ is a strong, reliable and safe 4HP power solution for your modular system. The Strom+ power module includes many safety mechanisms to prevent your modules from being damaged. These include most importantly short-circuit protection, overvoltage protection and a replaceable main input fuse. See the full list below.

Strom+ also offers a current sensing technology that indicates current consumption of your system. LEDs of each rail will turn orange then red, when current consumption reaches or crosses the maximum load of that rail.

Strom+ has extremely low ripple, even under full load. This means better sound and stability for your modules.

One module can power multiple skiffs via Strom Passive Module, a Strom Connector Cable, or a KOMA Strom Busboard.

Technical Specifications

Inputs and Outputs

Output: 1.5A @ +12V | 1.5A @ +5V | 1.0 A @ -12V
Input: 15V, 4.6 A (center positive)

Safety Mechanisms

Replaceable input fuse. Protects the wall-plugged adapter. The KOMA Strom AC/DC adapter actually has its own protection mechanisms and will itself shutdown in most cases before the input fuse trips.
Input overvoltage. Strom+ works up to specification from 15V - 20V input and works out of specification up to 28V input.
Input reverse polarity protection
Output overvoltage protection
Output short-circuit protection
Output over current protection
Output undervoltage protection
All above output protections independent for each rail. If any rail fails, the whole module shuts down.
Connectors and Controls

Main DC-Input (15 VDC)

On/Off switch
Front panel connector to a passive Strom module
2 standard Eurorack 16-pin connectors (for modules or a flying busboard)
Back panel Strom connector to solid busboards

Dimensions

4HP
48mm without Eurorack power connector connected (distribute power via Strom connector cable)
52mm with Eurorack power cable connected

Review: ***B-STOCK: Torn inner sleeve, otherwise in excellent working condition***


Amused To Death is the third studio album from Roger Waters outside of his work in Pink Floyd. As one of the fundamental creative forces in the prog behemoth, of course it's hard to separate his solo work from that most famous of bands, but this is indeed its own beast. At times it's an experimental space in which Waters uses space and minimalism to great effect, creating a foreboding sound peppered with speech samples and field recordings. There are of course plenty of more straightforward tracks too, like lead single 'What God Wants, Part 1'. This lavish issue of the 1992 album spreads the music out across four discs and comes in a box set format, a must-have for devoted Floyd and Waters collectors.

Notes: Designed in collaboration with Black Arts Toneworks, the Boneshaker is a dirty boost coupled with a powerful 3-band semi-parametric EQ. The Boneshaker can smack the front-end your amp into overdrive, or sculpt the tone of your fuzz to stand out in a mix. If your already dirty amp channel needs a little bit of a goose and you want full control over every frequency, the Boneshaker is just the ticket.

General Specifications
INPUT

1 x 14" instrument
OUTPUT

1 x 14" instrument
CHASSIS MATERIAL

All Metal
POWER SUPPLY

9V Alkaline Dry Battery or Optional Power Supply
Dimensions
HEIGHT

2.25" (5.71 cm)
WIDTH

2.63" (6.68 cm)
LENGTH

4.68" (11.88 cm)
WEIGHT

1.0 lbs. (0.453 kg.)

Review: If you type ELO into Google today the first suggestion is Elon Musk. Sure, he might have cracked, to some extent at least, the mass-marketed electric car, and all the best to him in the space race. Nevertheless, it's disputable whether or not he was ever quite the visionary Jeff Lynne, Roy Wood, and Bev Bevan were in the early-mid-1970s. The undisputed heyday of Electric Light Orchestra, fourth album Eldorado was arguably at the peak of their creative force. Already having firmly established their sound - a surreal hybrid of bar rock, soul, blues, and grand strings - this record really sees them explore the possibilities of that abstract brew. Better yet, ears were open enough at the time to ensure they didn't languish in obscurity, sole reserve of the obsessives or deliberately contrary listeners, and instead claimed a spot in the upper echelons of British pop at the time.

Notes: "We meat again!" Proudly presenting the DOD Meatbox (2015).

Answering the call of low frequency freaks everywhere, the DOD Meatbox (2015) is an updated take on the cult favorite Meatbox from the '90s. As a bass subharmonic synthesizer and low-end enhancer, the Meatbox can produce a range of sounds from a slight thickening to a full-on, low-end assault! Use the Meatbox on bass guitars, extended-range guitars, synths, even drum machines and push all the air out of any room. If you're looking for a new way to move your audience, look no further.

More than just a low frequency boost, the DOD Meatbox (2015) can also cut frequencies for tone sculpting as an interactive EQ and even produce distortion depending on where the output level is set.

The DOD Meatbox (2015) offers independent Octave, Output Level, Subharmonic and Low Frequency controls. True bypass allows your tone to remain pristine even when the DOD Meatbox is off. This is a big difference from the original, which would colour your bypassed tone.

The modern 9V DC power supply input makes the pedal more pedalboard friendly.

Notes: Unlock the potential of the Quad LFO with the LFO Phase Expander. Each expander gives you three outputs that duplicate the LFO with a fixed phase difference. The first ranges from 0- to 180-, the second from 90- to 270-, and the last from 180- to 360-. Along with the original output, this gives you four phases of modulation. These are easily tuneable to quadrature (all knobs centred), but also any arbitrary phase relationship. You can attach up to four expanders, one for each LFO, giving you up to sixteen modulation sources.

A multiphase LFO is extremely useful for building rhythmic modulations, particularly when paired with analogue logic, such as provided by Babel. Further, regardless of the waveform selected on the Quad LFO, the output of the Phase Expander is always a sine wave. This gives you the useful possibility of having three rhythmically related phases of an LFO synced to a clock signal.

Other than rhythmic modulations, the most common use of a multiphase sine LFO is in creating panning and crossfade controls that sound correct using only one or more VCAs. This is useful in panning sounds back and forth, rotating a sound in quadraphonic space, creating Shepard tones, etc.

Even when you don't have a specific need for exact phase relationships, a multiphase LFO gives you a convenient way to expand your palette of potential modulators, adding three related but distinct waves.

Specs

Size: 6HP
Depth: 22mm
Power Consumption: +12V 21mA, -12V 21mA
Output Swing: -5V - +5V peak
Output Impedance: 1kO
Output Drive: 2kO (min), 20kO+ (ideal)

Notes: QMS does quadraphonic mid-side processing. Given a left front, right front, left back, and right back signal, it produces a mid and three side signals: left-right, front-back, and cross or diagonal. Then given these latter signals, it again produces left front, right front, left back, and right back. It has intelligent normals for passthrough, -6dB lowered mid and side signals to avoid clipping, and is equally useful for stereo mid-side when quadraphonic is not available.

Rather than merely creating an image of a sound, something that you passively look at, this module allows you to create a sonic texture that fills a room. Listening becomes active exploration instead of passive observation. Ambient music is all about space. But stereo can only provide a passive experience of this space. It's like there was a wonderful landscape glimpsed from a train window, and many experiments in stereo imaging attempt to reproduce the experience of being in that train, looking through that window. With quadrophonic sonic textures, you get to leave the train and run with the caribou.

Specs

Size: 6HP
Depth: 22mm
Power Consumption: +12V 75mA, -12V 75mA
Output Swing: -10V-+10V peak
Input Range: -10V-+10V peak
Input Impedance: 94kO
Output Impedance: 150O
Output Drive: 600O (min), 2kO+ (ideal)

Notes: Babel is a tool for creating massive intermodulation, and a workhorse for analogue logic, depending on your use and interpretation of its function. It provides three inputs, which can be arbitrarily increased with the chainable expander (see below). For each of those inputs, Babel outputs the maximum value (ANY), the minimum value (ALL), and the balanced middle value (XSOME), which follows along the centre values of the input waves. What CENTER means is adjustable via knob and CV control. XSOME is particularly interesting, as it has the same general shape as a multiplication function, but with sharper edges. What this means it that Babel will create ring-mod like intermodulation-but with extra harmonics like those produced with a wavefolder, and with an arbitrary number of inputs, instead of just two.

When viewed as a logic module, Babel takes any group of truth values and tells you whether any of them are true (ANY, the equivalent of "or" with just two values), whether all of them are true (ALL, the equivalent of "and" with just two values), and whether some, but not all of them are true (XSOME, the equivalent of "xor" with just two values). Turn CENTER all the way to the right for 0-+5V logic, or leave it cantered for -5V-+5V logic-handy when your "logic" modules are really LFOs.

Specs

Size: 6HP
Depth: 22mm
Power Consumption: +12V 44mA -12V 44mA
Output Swing: -10V-+10V peak
Input Range: -10V-+10V peak
Input Impedance: 30kO
Output Impedance: 150O
Output Drive: 2kO (min), 20kO+ (ideal)

Notes: The New Systems Instruments VCA module gives you four well-calibrated VCAs in 6HP. These VCAs use operational transconductance amplifiers (OTAs) at their core, for true linear operation. However, unlike most OTA VCAs, the New Systems VCA is extremely low noise and distortion, coming in at < 0.2%, with ~0.05% typical.

There's no such thing as "transparent," particularly in synthesis, where the concept of an original signal that could be faithfully reproduced is often altogether absent. In a VCA in particular, a desirable envelope response can be even more important than accurate reproduction of the input at some fixed level.

The New Systems Instruments VCA has an extremely neutral, open sound. The envelope response sounds noticeably fast and accurate. If you want a dirtier VCA, stay tuned. New Systems are in the process of designing a different VCA with some control over signal and envelope linearity.

Specs

Size: 6HP
Depth: 22mm
Power Consumption: +12V 25mA / -12V 25mA
THD+N at 1kHz: 0.2% (max), ~0.05% (typical)
Output Swing: -10V - +10V peak
Input Range: -10V - +10V peak
CV Unity: 5V
Input Impedance: 85kO
Output Impedance: 150O
Output Drive: 2kO (min), 20kO+ (ideal)

Notes: UDG have further fined-tuned already a great design concept of a flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide silver finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Multi Format Turntable Silver MK2 also features heavy-duty, spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Multi Format Turntable Silver MK2 not only transports your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black/ silver coloured combination.

Specifications

Colour: Black/Silver
Weight: 7,80 kg / 17.16 lbs
Outer Dimensions (W x H x D): 51.1 x 42.6 x 23 cm | 20.1 x 16.7 x 9.1 inch
Inner Dimensions (W x H x D): 45.1 x 38.6 x 7.8 cm | 17.7 x 15.2 x 3.1 inch
Material: Heavy duty construction of 9 mm thick plywood
Protection: Extra-wide silver solid aluminium profiles

Secure stacking due to stackable ball corners
Sturdy construction
Full padded interior keeps controller well-protected
High density diamond embossed EVA foam protective padding

Extras

Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern

Fits:

Technics SL-1200MK7, SL-1200GR, SL-1200GAE, SL-1210GR
Pioneer PLX-1000
Denon DJ VL12 Prime
Reloop RP-8000MK2, RP-7000MK2, RP-4000MK2, RP-2000MK2, RP-1000MK2
Stanton ST-150, STR8.150, T.52, T.55 USB, T.62, T.92 USB
Vestax PDX-3000
Numark TTX
Audio Technica LP120-USB, LP1240-USB, LP120XUSB, LP1240-USBXP, LP140XP, LP3, LP5, LP7, LPW40WN
American Audio Power Drive 2.2
Mixars LTA, STA
Or similar size turntables and accessories

Notes: Introducing the n-1 case, a sleek, thoughtfully designed Eurorack modular case for sound and music makers. Our flat-packable case interlocks and slides together, requiring no tools to assemble. Later in the year, we will be launching a range of accessories that will provide further versatility to the n-1 case. These add-ons will allow you to customize your case to suit your unique preferences, ensuring it remains an adaptable companion on your evolving musical journey.

What's in the box?
12mm plywood frame
3mm plywood back
4 dowel pins
1 pair of aluminum rails
M5 hex socket screws
M3 rail slide nuts
mystery stickers!
*case is unpowered, giving users the freedom to choose a panel-mounted power supply or adapt an internal power option.

Notes: The ADE-50 provides 3 all-analogue voltage controlled amplifiers based on a modern operational transconductance amplifier design.

The VCA's are designed to provide a good balance between the performance and specification of modern 'on-chip' VCA's and the character and musicality of classic analogue designs.

The OTA core of each VCA is fully discrete - it is built from only resistors, capacitors and transistors - however, the CV conditioning, audio input and output stages are built using high-quality op-amps giving the best balance between musicality, character and performance.

The ADE-50 provides a good signal-to-noise ratio, linearity, attenuation, an output level at unity gain at 5V CV input, minimal CV 'bleed' and minimal output offset/bias.

Notes: The AT-XP7 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulphide (PPS)/glass fibre body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 6.0 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

Notes: Play is a high-fidelity sample player with a full feature set.

Up to 32 samples can be loaded at a time and dynamically switched between using the file knob and associated CV input. Playback modes include one-shot, looping, or gated playback; all with extremely low latency. Transform your samples by pitching them up two octaves or down three octaves, all with a pitch knob that can be free running or quantized to semitones. The pitch CV input tracks volt per octave across its entire range and allows for musical sequencing of samples. Play ships with a pre-loaded SD card packed with loops, drum hits, and field recordings to get you up and running immediately.

Notes: NuX Mighty 8BT is a compact guitar amplifier with features that enable it to be more than just a bedroom combo. Powered from the included 12V mains adaptor or optionally from 8 x AA batteries for portable use. The guitar input has clean, overdrive and distortion modes with modulation/delay effects and digital reverb. Settings can be customised for tone and effects and these are stored for each of the 3 modes. Deeper effects editing is provided by the Bluetooth link using the Might app, which is available from Google Play or App Store. A mic input is also included with a dedicated reverb send for vocals. A built-in drum machine is controlled by a simple but intuitive tap tempo/style button and rotary volume control. Aux in and headphone out complete the control panel to provide a multi-purpose jamming and recording amp for guitar players of all genres.

Notes: JTC Pro is an advanced drum & loop pedal with simplified controls, built into a dual switch stomp box pedal with 6 hours of recording capability and 256 loop track memories. Audio recording quality is 24-bit with a 44.1 kHz sample rate. A fully functional built-in drum machine section can be controlled on-the-fly by tapping tempo and punching in fills on demand using the 2 footswitches. A USB interface is included for firmware updates and can even load pre-recorded audio files to be used as backing tracks. Selectable playback modes and output options make this pedal an indispensable accompaniment tool for solo and duo performers.

Notes: This stand its part of a new concept in COVERUP. With differents parts, you can use to put on multiple synths, including big devices, until now, not possible with the other stands.

You can configure your setup with you like more, with two big devices, or three medium devices. Easy to ensamble, very light to move from your studio to live. Just you need 1 minute to arm and start to playing.

Your setup of synthesizers and studio equipment can change permanently and with it also the position on the work table.

Taking this into account, CoverUp developed a 3-level support, which can be set up in different ways depending on the number of machines that we are going to place and their size.

In the triple stand configuration (using all 4 parts), 3 20cm machines can be placed. deep and a maximum height of 7cm.

This space is enough for much of the hardware available today.

The triple bracket parts are assembled with screws (included) using a universal socket that holds them together firmly.

In turn each part can be used as a simple support. It is only enough to separate the parts by removing the screws and use each part as it suits us.

Each part has rubber feet underneath, so that the support does not slip and is firmly supported.

Both halves of the triple support are linked with wooden rods at various points to give it lateral stability.

The design contemplates space for the rear connectors of each equipment, so that none of them are obstructed by the support.

Measures:
Depth: 58cm
Height: 41cm
Width: 34cm

Notes: The model 230 double support is designed to house two large pieces of equipment, with the ability to improve the operating position of both.

In each position of the bracket, a 30cm piece of equipment can be placed. deep, such as Maschine MK3 and Maschine Jam.

This double support in turn allows it to be used as two simple supports. Simply unscrew the front half from the back.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The width is adjustable according to the length of the rods that join both halves.

The support includes rubber feet so that it does not scratch or slip and the screws for its assembly.

Notes: The studio legends

For decades now, professional users all around the world have placed their trust in Beyerdynamic's classic range: DT 770/880/990 PRO. These benchmark-setting studio headphones, available in three different models, boast extremely detailed resolution and very transparent sound.

The DT 770 PRO headphones is the range's closed-back model and offers maximum flexibility and detailed sound that you can rely on.

Impressive sound volume

The Beyerdynamic DT 770 PRO headphones have established themselves as a firm favourite amongst music producers, sound engineers and broadcasters and are used in studios all over the world. They reproduce the entire frequency range with incredible precision, and even reproduce low frequencies in punchy detail.

Top-notch impulse response

The headphones are designed for critical music and sound monitoring, providing a perfectly neutral listening environment with exceptional isolation and top-notch impulse response. High frequencies are translated into an analytical and differentiated sound. Ultra-low bass sounds are defined and reproduced crisply.

Extreme comfort

The robust spring steel headband ensures a secure fit for the wearer. Soft ear cups mean that the headphones are comfortable even if worn for prolonged periods. The single-sided cable allows the headphones to be put on and taken off frequently without cables getting tangled.

Allrounder; universal studio

These 80-ohm headphones are the ideal Choice for a range of studio applications.

Made in Germany

The DT 770 PRO headphones are and always have been handcrafted in Germany. The durability of these headphones is worth noting, because all the components used are replaceable if necessary.

High-end studio quality

Thanks to the Tesla technology developed in Heilbronn, the DT 770 PRO offers even finer resolution with precise and powerful bass. The pro flagship also sets new standards in terms of wearing comfort and workmanship.

Technical specifcations

Transmission type: wired
Weight headphones without cable: 270 g
Transducer type: Dynamic
Operating principle: Closed
Nominal frequency response: 5 - 35,000 Hz
Nominal impedance: 80 O
Nominal SPL: 96 dB
Nominal T.H.D: < 0.2%
Power handling capacity: 100 mW
Sound coupling to ear: Circumaural
Ambient noise isolation: approx. 18 dBA
Nominal headband pressure: approx. 3.5 N
Weight: 345 g
Length and type of cable: 3 m / straight cable
Connection: Gold plated mini stereo jack plug (3.5 mm) & 1/4" adapter (6.35 mm)

Notes: Building on the reputation of its award-winning predecessors, the Erisr Studio 5 is a substantial update that delivers richer low-end and more controlled high-frequency response that reproduces every detail in your recordings with a natural sound unparalleled in its class. Designed for superior performance in both home studio and small professional mix rooms, the Eris Studio 5 combines flexible connectivity with sonic accuracy that puts it a class all its own.

The custom-designed EBM (Elliptical Boundary Modeled) waveguide provides superior high-frequency response and wide 100-degree horizontal dispersion to create a broader sweet spot. Narrow vertical dispersion reduces reflections from your desk, and a silk-dome tweeter ensures snappy, accurate transient reproduction. An elegant new enclosure design improves the waveguide performance so you'll hear the finest details in your mix.

The woven-composite low-frequency driver offers Eris' signature tight, clear bass with plenty of punch. Its 80W of biamped power make the Eris Studio 5 more efficient than previous designs. The ported enclosure maximizes bass response and allows the Eris Studio 5 to reach down to an astonishing 48 Hz - without a subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything.

Features

5.25-inch woven composite low-frequency driver
1-inch, ultra-low mass, silk-dome, high frequency driver
Crossover Frequency, 3.5 kHz
100- x 60- EBM waveguide provides a sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
80W, Class AB dual amplification
48 Hz to 20 kHz frequency response
102 dB Peak SPL (@ 1 meter)
Acoustic Tuning Controls:
Acoustic Space (Flat, -2 dB, -4 dB)
High Frequency (+/-6 dB, center 10 kHz, continuously variable)
Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)
Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Inputs:
XLR and 1/4-inch TRS balanced rear-panel inputs
RCA unbalanced rear-panel inputs

Protection:
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
Power Saver mode (engages after 40 minutes)

Set up your studio monitors for your room.

Erisr Studio 5 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonus studio monitors, the Eris Studio 5 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10kO

Performance

Peak SPL: 102 dB (@ 1 meter)

Speakers
Crossover frequency: 3.5 kHz
Coverage pattern: 100 degree (H) x 60 degree (V)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA

Power amplifier type: Class AB

Measurements

Dimensions: 11.50 x 8.00 x 8.80 in

Product depth: 8.78" (22.3 cm)
Product height: 11.5" (29.2 cm)
Product width: 8" (20.32 cm)

Notes: GOBLET is an analogue filter and distortion unit with some added quirks and extra controls.

Why:

To make stuff sound filthy.
To shape the output of an oscillator.
To live interact with the sound during a performance.
To soft sweep the cutoff thanks to the optocouplers logarithmic response.

With:

Simple waves - make them unrecognizable.
Complex waves - shape them into something new.
Percussions - crank the resonance and give an acid twist to a beat.
No input - play with the feedback and the touch controls.

Dimensions:

8 HP
18 mm deep

Current Draw:

45 mA +12V
25 mA -12V

Whichever power connector you use should work fine with the polarity.

Notes: 4-input VCA stereo mixer w/ pan, stereo out, metering

50mm deep

Review: Following the enduring success of the 2017 action RPG Horizon Zero Dawn - in which we play as Aloy, a lone human hunter lost and confused in a world overrun by giant, aggressive mechs - now comes Horizon Forbidden West, its sequel, along with a brand new soundtrack by the game franchise's extensive in-house roster of composers. Matching the game's theme of environmental restoration and a return to purer pasts, we hear soaring original compositions from Niels van der Leest, The Fligght, Oleksa Lozowchuk and Joris De Man, all compiled onto a deluxe 6xLP edition - for the merch-heads, there's even an exclusive slipmat, a t-shirt, and several inserts with extensive notes on the game and music bundled in there too.

Notes: All Prestige series styli are compatible; any of these styli will work in any Prestige body. All the Styli; Green, Black, Red, Blue & Silver Styli. The performance difference translates into real sonic improvements; as you move up the Prestige line, the sound becomes smoother, more open and more detailed.

Genuine replacement styli for all Grado Prestige cartridges including black, green, blue, red, silver and gold

A worn stylus can cause serious (irreversible) damage to your records, and provide poor sound quality

Review: Given anyone over the age of 35 grew up with copies of Queen: Greatest Hits Vol. 1 and Vol. 2 in the house, you could be forgiven for asking if we need another retrospective of the iconic English rock band. Not least as there's also a Greatest Hits Vol.3, which many don't realise due to the success of the preceding two and how long the third took to materialise after the tragic death of lead singer Freddie Mercury.

Perhaps riding on the shirttails of the Platinum Jubilee of another monarchical figure, The Platinum Collection arrives and, on the face of it, does little that's not been done before. Don't Stop Me Now, Bicycle Race, Bohemian Rhapsody, Under Pressure, Flash - all the usual suspects are here. Keep reading, though, and you realise just how much else is here. Pretty much every great Queen track, plus stacks of post-Mercury singles and cover versions with all ranging from George Michael to Wyclef Jean. What's not to like?

Notes: Think of the MFD like a tiny DJ mixer: two stereo inputs, one stereo output, with the option to cue either input and crossfade between the two. A simple idea very well executed.

Supplier's Notes:
Inspired by DJ mixers, the MFD allows you to cue and crossfade between signals. Ideal for live performance as well as jamming out ideas in the studio.

Supplier's Notes:
The 'MFD' is a 2-channel stereo crossfader designed for live DJ-style mixing and jamming in Eurorack. Two mono or stereo inputs are mixed to a single stereo output via direct or voltage control. Additional Cue controls provide preview monitoring of either input pre-mix via dedicated Cue switches and an output.

Voltage control over the crossfade and DC coupling allow for further creative uses such as a high quality stereo VCA or as a mix processor for either stereo audio signals or CV.

The MFD is designed to have very low noise and cross bleed and employs equal power crossfading for smooth constant level blending between signal sources.

Features:

Two channel stereo crossfader with voltage control.
Approx equal power crossfading.
Cue output switches for direct monitoring of either stereo input (pairing well with HPO for headphone monitoring).
Can be used as a high quality stereo VCA.
DC coupled for use with both audio and CV.
Skiff friendly with reverse power protection.
Two year warranty.
Made in England.

Ideal For:

Smoothly blending and monitoring 'tracks' or 'scenes' during a live set.
High quality VCA use for stereo based sources.
Voltage controlled crossfading and mixing of both CV and Audio signals.
Other advanced uses including audio rate modulation, stereo panning effects and a CV controlled FX send.

Technical Specifications

Supply: +12V 70mA / -12V 70mA

Size: 6HP

Depth: 32mm