100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 1 to 50 of 887 on page 1 of 18
1  2  3  ...  18  »
FORTHCOMING
Happy Nerding FX AID Multiple Audio Effects Module (black faceplate)
Cat: 792159
 
Multiple audio effects module
Notes: 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, assigns and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other user selected Happy Nerding effects in any order. Also the possibility to run freely available third party effects will be added too.

Reflashing procedure is quite easy: playing 40 sec long "wav" file of line level amplitude to CV input.

Reflashing mode: hold both buttons for 10 sec.

Please note the reverse CV operation of the Dry/Wet control: positive CV crossfades from Wet to Dry, and negative CV crossfades from Dry to Wet.

By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 150 Hz or brought up to 48 kHz.

80 mA +12V
30 mA -12V
45 mm deep
Read more
MRP:$237.65 SAVE 24%
coming soon $180.81
FORTHCOMING
Hungry Robot Output Module Desktop Module Hungry Robot Output Module Desktop Module Hungry Robot Output Module Desktop Module
Cat: 780994
 
Output module
Notes: The Hungry Robot Output Module allows users to interface your modular system with headphones, speakers, and recording interfaces. It uses a high quality amplifier circuit to boost the signal to the level you need. It accepts both mono and stereo signals. Plug in you inputs and output however you need, internal switching will automatically route the signal to where it needs to be based on what you have plugged in. As with all Hungry Robot "Modular Boxes" the Output Module can be powered with a simple 9V DC, Negative Center power supply.

KNOB
-VOLUME: Controls the overall volume of the output. Adjust to taste.

PATCH POINTS
-IN(L/MONO): Left input. Use this if you are running mono and want it split into stereo.
-IN(R): Right Input
-OUT(L/STEREO): Left output. Use this for stereo situations (TRS/Headphones)
-OUT(R): Right Output

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$121.41 SAVE 17%
coming soon $101.17
Mutable Instruments Plaits Macro Oscillator Module
Cat: 681306 Rel: 24 Jul 18
 
Multi-algorithm macro oscillator - 12HP
Notes: Rightly considered a Eurorack classic, Plaits is the successor to the much-loved Braids oscillator. Huge range of modes offering everything from speech synthesis to analogue drums. Superb.

Supplier's notes:
Plaits is the spiritual successor of Mutable Instruments' best-selling voltage-controlled sound source, Braids. Not just an MKII version: its hardware and software have been redesigned from scratch.

Just like its predecessor, it offers direct access to a large palette of easily tweakable raw sonic material, covering the whole gamut of synthesis techniques.

Simplicity first:

Gone are the screen, menu system, hidden settings, and the long list of somewhat redundant synthesis models.

Thanks to additional CV inputs, and to the use of three timbre-shaping parameters per model, Plaits is straightforward to use, and much closer to the ideal of one synthesis technique = one model. What were fragmented islands of sound in Braids are now part of a continuum of sounds.

Ready for percussion:

Patch a trigger generator or sequencer into Plaits' trigger input and instantly use the module as a percussive source thanks to its built-in virtual low-pass gate (LPG).

An internal D (decay) envelope generator is normalled to all unpatched CV inputs. Just turn the corresponding attenuverter to add pitch, timbre or morphing modulation. And if plucks and snappy hits are not your thing, patch your own envelope or CV source into the LPG CV input.
Read more
 More than 10 in stock $198.04
Click for better price!
or call +44 20 7424 1960
quote 681306
Squarp Instruments Rample Wave System 4 Voice Sample Player & Audio Processor Module
Cat: 783294 Rel: 09 Sep 20
 
Sample player & audio processor module
Notes: Nicely thought out four-voice sample playback module from Parisian innovators Squarp. Load up a microSD card with samples (up to 2600 kits), then trigger and process. Neat.

Supplier's Notes:

Rample waves system

Eurorack 4-voice sample player & audio processor

Versatile sample machine

From percussive drum-machine kits to synth samples, breakbeats to sound FX, backing tracks to hour-long audio music, Rample can play up to 4 .wav files on independent audio outputs :

These samples are stored inside the provided SD card, and organized as kits, from A00 to Z99... allowing up to 2600 banks of 4 voices, with on-the-fly loading! The SD card is preloaded with tons of samples, and we made it very easy to import your own kits.

Thanks to the DC coupled audio outputs, it's also possible to play CV waveforms.

Effects rack

Each voice has its own "rack" of effects, and all audio effects can be enabled at the same time, allowing you to manipulate your samples in real time, from a gentle lowpass to massive destruction!

pitch - a great sounding pitch engine, based on a 6-pole interpolator, which ranges from -1 octave to +1 octave.

bits - two different bitcrushing algorithms, based on sample rate and resolution reduction. It produces distortion and warms the audio signal.

filter - a low resonance filter, DJ-style, cutting off the high frequencies or the low frequencies.

freeze - sample and loop a fraction of the played waveform, creating a glitching effect.

levels - decrease the gain or drive the signal.

It's also possible to edit 'advanced parameters' like the start point, sample length, attack/decay and run mode, and create mute groups without breaking a sweat.

Finally, thanks to the 4 CV inputs, any of the effects (or advanced parameters) can be assigned to create amazing modulations!

Multi-layer sampling

One of the key feature is the ability to "multi-sample" your kits, multiplying Rample's potential. Each voice supports up to 12 samples, can be played randomly or in a controlled fashion. It's a great way to add complexity and variations, to create organic/acoustic sounding drums, or simply to increase the number of samples per kit (up to 48).

As an example, Squarp are providing a multi-layered drum kit, with 12 different recordings of a kick, 12 different recordings of a snare, etc. Sequencing them randomly leads to a more natural drum playing.

Another kind of multi-layered acoustic drum kit is also provided, where each drum is recorded with 12 levels of velocity. Controlling the layer to be played leads to intricate, convoluted drums programming.

Of course, it's very easy to create your own multi-layered kit, and you can use this method to perform multiple synth chords, sound glitches, voices, breakbeats, ...

CV/Gate and Midi interface

Rample is designed to be the perfect rhythmic companion of your eurorack system thanks to its Gate (trig samples) and CV (modulate samples) connectivity.

You can also use it as a standalone midi machine, without using the CV/Gate connectivity: the midi in port allows you to trig & control all samples parameters + effects values at the same time. Each Rample comes with a 'stereo jack to midi DIN' and 'stereo jack to jack' adapters, easing the chaining of multiple modules in order to create an 8-voice, 12-voice, 16-voice (or more) midi drum machine!

SD card preloaded with 200+ kits from artists and sound designers, covering a large range of audio samples
Read more
MRP:$344.86 SAVE 17%
 4 in stock $287.37
Click for better price!
or call +44 20 7424 1960
quote 783294
Intellijel LPG 1U Passive Low Pass Gate Module
Cat: 782952 Rel: 24 Aug 20
 
Low pass gate module
Notes: Tiny little low-pass gate in Intellijel's compact 1U format. Great value approach to this west coast classic module, based on a vactrol for that natural, organic sound.

Supplier's Notes:

Drop this module (or a few of them) into your 1U row, patch in some sound sources, and then ping them with gates and CV to get some instantly pleasing results. So simple and fun!

Natural dynamics with the magic of vactrols.

In general, low pass gates (LPGs) control the amplitude and timbre of a signal by opening and closing a low pass filter. When the gate is closed, no frequencies are allowed to pass through (and no output is heard). As the gate begins to open, the lowest frequencies pass through to the output. As the gate opens further, the output grows louder and its high frequency content increases.

Traditional Low Pass Gates use vactrols to control the opening and closing of the filter. Encased within a vactrol is both a light source and a light detector. Applying a control voltage to the vactrol lights its internal LED i the brightness of which is measured by its detector. What makes vactrols particularly unique (and well-suited to musical applications) is their non-linear response to voltage - in particular, the way in which the internal LED slowly dims (rather than shutting off instantly) when the control voltage is removed. This sonic coupling of timbre and volume, along with the circuit's natural decay, makes the low pass gate particularly adept at producing tones associated with struck objects, like hand drums or marimbas. Indeed, low pass gates are the main ingredient of the so-called Buchla Bongo sound.

The Intellijel Passive Low Pass Gate 1U is a simple, vactrol based, 1-pole, passive low pass gate, which is controlled by an external CV input. Without positive control voltage, the gate is completely closed and none of the LPG's input signal is passed through to the output. Increasing amounts of positive CV open the gate i making the output signal both louder and brighter. At +5V, the gate is fully open and the input signal is passed through to the output.
This makes LPGs sound very different (and more acoustic) than the traditional complement of envelopes, VCFs and VCAs that are employed in most subtractive synthesizers. Exciting the vactrol (via the CV input) with a trigger, noise blast, or short envelope will result in a very natural sounding filtered envelope that's reminiscent of the sonic characterics of struck objects, which are allowed to decay naturally.

In addition, because this is a passive circuit (no power is applied to it), its sonic characteristics are somewhat dependent upon the audio signal you feed into it, making it a very natural and organic way to shape a signal's volume and tone.

Pairs very well with the intellijel Shifty module to derive polyphony out of a only a few HP of modules.

Width: 6HP
Depth: 19mm
Read more
MRP:$49.08
 9 in stock $44.93
Click for better price!
or call +44 20 7424 1960
quote 782952
Intellijel Quad VCA Voltage Controlled Amplifier & Cascaded Mixer Module
Cat: 643379 Rel: 13 Sep 17
 
Quad voltage controlled amplifier & cascaded mixer - 12HP wide
Notes: The Quad VCA is a compact and feature packed module that is sure to find its way it almost all of your patches. In addition to being used for standard VCA duties it can also be used as a mixer and signal booster.

Features:

- Manual LEVEL control per VCA which is convenient when using the module as a mixer or for biasing when CV modulating the VCA with a bipolar LFO.
- Dedicated CV attenuators with dual colour LEDs for monitoring bipolar CV signals.
- Continuously adjustable response from linear to exponential per VCA.
- Each CV input is normalled to the adjacent one for cascaded control.
- Each output is normalled to the mix input of the adjacent one which allows you to use adjacent sets as submixes or the fourth output can be used as a master mix output when none of the other outputs are patched.
- Each VCA has a boost switch that increases the output level by approximately +6dB (double).
Read more
MRP:$218.28 SAVE 14%
 More than 10 in stock $187.28
Click for better price!
or call +44 20 7424 1960
quote 643379
ADDAC System ADDAC215 Dual S&H+ Module (black faceplate) ADDAC System ADDAC215 Dual S&H+ Module (black faceplate)
Cat: 776254 Rel: 08 Sep 20
 
Dual sample & holds module
Notes: This new module should not be judged by it's size, at 6hp it's packed with features.

At its core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it's own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there's also 4 extra outputs: Noise, Difference, Average and Sum. The Noise output is coming from the noise source, the Difference output is the subtraction of section A minus section B, the Average output is the sum of both A plus B and then divided by 2 and finally the Sum output is the sum of both A plus B sections.

MECHANICAL:
Format: Eurorack
Width: 6 HP
Depth: 4 cm

ELECTRICAL:
Max current: +50mA/-50mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $147.46
Click for better price!
or call +44 20 7424 1960
quote 776254
ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate) ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate) ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate)
Cat: 776311 Rel: 08 Sep 20
 
Rhythm generator module
Notes: This module is a powerful rhythm generation machine- it features 4 voices of gate outputs (including inverted outputs for logic NOT sequences) where each voice can have independent lengths, all configurable with direct knobs anc cv inputs.

Perfect for precise polyrhythmic patterns and all sorts of non-linear sequencing.

The module works by 6 different rhythm generation "algorithms / principles":
Euclidean (equal distribution)
Golomb Rulers (inequal distribution)
Probabilistic (predictable distribution)
Game Of Life (organic progression)
Footwork'n (inducted error progression)
Pong (voltage controlled Pong game)

Plus a 4 channel Gate Sequencer Mode with up to 32 steps and 16 storable presets.

Add ADDAC402B Expansion for full I/O Midi control plus access to a powerful midi interface, with:
Midi Sync
5 cv to midi channels (notes and/or cc)
4 midi to gate channels
All panel controls (knobs, switches and push buttons) as cc controls.

All fully configurable with a midi learn feature for easier configuration.

MECHANICAL:
Format: Eurorack
Width: 20 HP
Depth: 5.5 cm

CONTROL VOLTAGE I/O:
CV inputs: 0 to +10v

ELECTRICAL:
Max current: 150mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
! low stock $490.80
Click for better price!
or call +44 20 7424 1960
quote 776311
Doepfer A-124 Wasp Filter SE Module (special edition black & yellow version) Doepfer A-124 Wasp Filter SE Module (special edition black & yellow version) Doepfer A-124 Wasp Filter SE Module (special edition black & yellow version) Doepfer A-124 Wasp Filter SE Module (special edition black & yellow version)
Cat: 671564 Rel: 29 Nov 17
 
12dB multi-mode filter with unique classic circuitry, based on the filter from the 70s EDP Wasp synth
Notes: Module A-124 is a special 12dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies, manufactured by the UK company "Electronic Dream Plant" with Chris Huggett und Adrian Wagner). This design "abuses" digital inverters as analog operational amplifiers leading to distortions and other "dirty" effects that generate the specific sound of this filter. The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self-oscillation in contrast to most of the other filters of the A-100 system.

Inputs: Audio In, CV In (2x)
Outputs: Bandpass Out, Low/Highpass Mix-Out
Controls: Audio and CV attenuator, Frequency, Resonance, LP/HP Mix

The function and operation of this module is very similar to the module SEM VCF A-106-5. But the sound of both filters is very different! The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer).

- 3U Eurorack module, 8HP wide, 45mm deep
- Current draw 30mA
Read more
 3 in stock $76.41
Click for better price!
or call +44 20 7424 1960
quote 671564
Befaco Stmix 4 Channel Stereo Mixer Module
Cat: 716763 Rel: 14 Feb 19
 
Stereo mixer - 6HP
Notes: Stmix is a compact 4 channel stereo mixer with an Auxilliar input. This input will allow us to chain a few of them or to insert an extra fifth input.

This module is compatible with our Hexmix system, and can be internally connected to hexmix module to add the output of STMIX to your main mix.
Read more
MRP:$174.37 SAVE 22%
 7 in stock $136.69
Click for better price!
or call +44 20 7424 1960
quote 716763
Doepfer A-111-5 Mini Synthesiser Voice Module Doepfer A-111-5 Mini Synthesiser Voice Module
Cat: 785445 Rel: 10 Sep 20
 
Synthesiser voice module
Notes: Module A-111-5 is a complete monophonic synthesizer module that includes these components (modular version of Dark Energy):

VCO
Manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
Range switch -1 / 0 / +1 octave
Frequency range about 10Hz ... 12kHz - FM (frequency modulation) control with modulation source switch (LFO1 / off / ADSR)
Manual pulsewidth control for rectangle waveform
PWM control with modulation source switch (LFO2 / off / ADSR)
Waveform switch (sawtooth / off / triangle)
The sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW)
External CV input for VCO frequency (1V/octave)
External CV input for external PWM of the rectangle - internal CV input for frequency (1V/octave) connected to the A-100 bus via jumper, the jumper can be used to interrupt this internal connection if not wanted

VCF
24 dB low pass
~ 12 octaves frequency range
Manual frequency control
Tracking switch half - off - full (internally connected to the external frequency CV input of the VCO, i.e. the VCF tracks to the VCO if the switch is set to "half" or "full" position)
XM: exponential FM (frequency modulation) control with modulation source switch (LFO2 / off / ADSR)
LM: linear FM (frequency modulation) control to modulate the VCF by the triangle of the VCO in a linear (!) manner
Manual resonance control (up to self oscillation)
External audio input (this signal is added to the VCO signal)
External CV input for filter frequency - 1V/octave tracking for usage of the VCF as a sine wave oscillator (not as precise as the VCO but much better than most of the other filters)
VCA
Manual amplitude control
AM (amplitude modulation) control with modulation source switch (LFO1 / off / ADSR)
External CV input for VCA amplitude - special control scale: exponential scale in the range from about -20dB to -80/90dB, linear scale from about -20dB to 0dB (Remark: this special control scale results in a loudness behaviour that is a bit different from pure linear or exponential VCA)
LFO1 and LFO2
Manual frequency control
Waveform switch (triangle / off / rectangle)
Range switch (low, audio, medium) - LED display (dual green/red color for positive/negative share of the signal)
The inverted LFO1 signal is available as an additional socket (to use the LFO1 signal for external modules)
An internal jumper can be used to select between the LFO1 signal or the inverted LFO1 signal

ADSR
Manual controls for Attack, Decay, Sustain, Release
Range switch (long, short, medium) - blue LED display
ADSR signal is available as an additional socket (to use the ADSR signal for external modules)
Gate input connected to the A-100 bus via jumper, the jumper can be used to interrupt this internal connection if not wanted

Remarks:
As the LFO frequencies can go up to moderate audio range (~ 5kHz) even audio FM effects of VCO (pitch and pulsewidth), VCF and ADSR are possible.

If the VCO is turned off (waveform switch = center position, pulsewidth control = fully CCW) and the VCF resonance is set to maximum the module can be used as a sine oscillator. The sine can be modulated in a linear manner from the triangle wave of the VCO and by LFO2 in an exponential manner at the same time !

From the factory the socket labelled "LFO1" outputs the inverted LFO1 signal. But as the module has several internal pin headers available even another signal may appear at this socket by changing the internal module patch. These six pin headers are available: LFO1 output, LFO2 output, ADSR output, inverter input, inverter output, output socket. The internal default patch is LFO1 -> inverter input, inverter output -> output socket (i.e. socket = inverted LFO1). But even another signal can be patched to this socket (e.g. inverted ADSR, non-inverted LFO1, inverted or non-inverted LFO2). It is also possible to add a blind panel next to the A-111-5 with a couple of sockets that are connected to the corresponding pins of the A-111-5 pc board. The in- and outputs of the VCO, VCF and VCA are not available as pin headers because the VCO, VCF and VCA are internally connected in the circuit which is used in this module.
Read more
MRP:$344.86 SAVE 18%
 5 in stock $283.07
Click for better price!
or call +44 20 7424 1960
quote 785445
ADDAC System ADDAC209 VC Time Compensated Glide Module (red faceplate)
Cat: 776185 Rel: 08 Sep 20
 
Glide/slew circuit module
Notes: This is our take on a glide/slew circuit. It introduces a time compensation for the glide/slew rate so that any interval have the same glide time.

Normal glides have a fixed speed, they take X time to go up a semitone and X*12 to go up an octave. A compensation circuit was added to detect and dynamically change the speed according to the distance needed to be made, so that in the end it'll take the same time to reach the final destination no matter if the interval is 1 semitone or 3 octaves. This compensation feature (dry/wet) can controlled by the front panel knob or by CV.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 55 mm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
 1 in stock $100.09
Click for better price!
or call +44 20 7424 1960
quote 776185
ADDAC System ADDAC111 Ultra .WAV Player Module (red faceplate) ADDAC System ADDAC111 Ultra .WAV Player Module (red faceplate)
Cat: 776121 Rel: 08 Sep 20
 
.wav player module
Notes: The ADDAC111 ULTRA .WAV PLAYER is the long awaited upgrade to the praised ADDAC101 .WAV PLAYER.

While keeping all functions of the original, there's more dedicated controls as well as a few new functions.

For this version, Micro SD Cards were used- this decision was made in order to help the hardware construction and make it only 3cm deep.

An Expansion module, ADDAC111B, was also created to allow users to recall the first 8 files through dedicated trigger signals. This allows sequencing of files.

The Loop Size, Start Point and Sample Rate defines how the loop is played.

Loop Settings defines if sample is looping or playing only once.

File Access if it advances to the next or previous file.

The VCA section controls the overall volume of the module.

And finally the Envelope Follower generates a CV voltage related to the amplitude of the audio signal pre-VCA.
Read more
MRP:$622.55 SAVE 19%
 2 in stock $501.57
Click for better price!
or call +44 20 7424 1960
quote 776121
ADDAC System ADDAC103 T-Networks Module (black faceplate) ADDAC System ADDAC103 T-Networks Module (black faceplate)
Cat: 776114 Rel: 08 Sep 20
 
4-voice percussion module
Notes: Inspired by Twin T-Networks circuits used in many lengendary drum machines, ADDAC system have developed a simple and straight forward 4 voice percussion module with frequency controls for each of its voices.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.

Tech Specs:
6HP
2.5 cm deep
40mA +12V
40mA -12V
Read more
 1 in stock $118.40
Click for better price!
or call +44 20 7424 1960
quote 776114
ADDAC System ADDAC402B Heuristic I/O Expansion Module (red faceplate) ADDAC System ADDAC402B Heuristic I/O Expansion Module (red faceplate)
Cat: 776312 Rel: 08 Sep 20
 
MIDI expansion module
Notes: ADDAC402B MIDI Expansion allows full I/O Midi control of ADDAC402 plus access to a powerfull midi interface, with:

Midi Sync:
Allows the module to synchronize with any external MIDI device’s Clock, including transport messages like play, stop and continue.

CV to MIDI:
5 CV inputs (Fills 1 to 4 and Assign) to MIDI Notes and/or CC messages, the Note and CC number can be independently configured via the Configuration Menu.
These CV inputs can be sent on independent MIDI Channels, for ex: Fills 1 to 4 on MIDI Channel 1 and Assign on MIDI Channel 2.

MIDI Controller:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be sent to MIDI Out as CC controls as any standard MIDI controller. The individual CC numbers can be configured through the Configuration Menu.

MIDI to Gate:
All 4 Gate outputs can be controlled/sequenced from an external MIDI device.
For ex: we can configure Gate 1 to be responsive to CC 1, Gate 2 to CC 2 and so on. Everytime CC 1 gets a value of 127 Gate 1 will be turned ON, if it gets a 0 value Gate 1 will be turned OFF.

MIDI Control:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be controlled/sequenced from MIDI CC controls. This allow full automation of the module via MIDI
The individual CC numbers can be configured through the Configuration Menu and includes a midi learn feature for easier configuration.
Also controllable via MIDI is the change of Presets and Modes.
Read more
MRP:$111.08
 1 in stock $107.63
Click for better price!
or call +44 20 7424 1960
quote 776312
ADDAC System ADDAC202 Amplifiers Module (red faceplate) ADDAC System ADDAC202 Amplifiers Module (red faceplate)
Cat: 776175 Rel: 08 Sep 20
 
Amplifier module
Notes: A dual channel Amplifier that either boosts your signals up to 10 times the original input or attenuates it to zero.

It also features two leds per channel, to monitor your output polarity.

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $133.46
Click for better price!
or call +44 20 7424 1960
quote 776175
ADDAC System ADDAC204 VC CV Mapping Module (red faceplate) ADDAC System ADDAC204 VC CV Mapping Module (red faceplate)
Cat: 776178 Rel: 08 Sep 20
 
CV mapping module
Notes: With the VC mapping module you'll be able to scale your voltage and also control its offset via CV.

This module provides two outputs for normal and inverted output voltages. A third output morphs between the normal and inverted outputs.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 10v

Electrical:
. Compatible with +-12v and +-15v power supplies?
. Max current: 40mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $201.27
Click for better price!
or call +44 20 7424 1960
quote 776178
ADDAC System ADDAC807C+ Individual Channel Stereo Outputs Module (black faceplate)
Cat: 776670 Rel: 08 Sep 20
 
Summing mixer module
Notes: Dedicated expansion for the ADDAC807C VC Summing Mixer

Features 4 individual track post fader stereo outputs.

2Hp
2 cm deep
0mA
Read more
MRP:$67.16
 1 in stock $66.72
Click for better price!
or call +44 20 7424 1960
quote 776670
ADDAC System ADDAC701.REV2 VCO Module (black faceplate) ADDAC System ADDAC701.REV2 VCO Module (black faceplate)
Cat: 776357 Rel: 08 Sep 20
 
VCO module
Notes: This is our new VCO, we discontinued our ADDAC701 VCO a few years back and since we've been wanting to release a more stable version with better pitch tracking increasing pitch reliability further minimizing the detuning issues of analog VCO's.

For this new revision we chose to use the modern version of the CEM3340 ic from CoolAudio and add the triagle to sine circuitry of our previous VCO. This new version is extremelly stable over 7 octaves.

We also added a new Mix section which allows mixing of all waveforms controlled by 3 knobs SIN/TRI, MIX and SAW/RECT.

Tech Specs:
8HP
3.5 cm deep
60mA +12V
60mA -12V
Read more
MRP:$178.24
 1 in stock $176.52
Click for better price!
or call +44 20 7424 1960
quote 776357
ADDAC System ADDAC703 Discrete Mixer Module (black faceplate) ADDAC System ADDAC703 Discrete Mixer Module (black faceplate) ADDAC System ADDAC703 Discrete Mixer Module (black faceplate)
Cat: 776360 Rel: 08 Sep 20
 
Mixer module
Notes: Here's the second module of ADDAC System's 700's Heritage Series.

Inspired by Moog CP3 mixer, this is a totally discrete analog mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.

This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 3 cm

Electrical:
- Max current: 60mA.
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
- black screws
- black fibre washers
Read more
 1 in stock $201.27
Click for better price!
or call +44 20 7424 1960
quote 776360
ADDAC System ADDAC805 VC Xfade/Panner Module (red faceplate) ADDAC System ADDAC805 VC Xfade/Panner Module (red faceplate)
Cat: 776662 Rel: 08 Sep 20
 
Crossfader & panner module
Notes: This is ADDAC System's new crossfader / panner. It can be used to crossfade between 2 signals or pan a signal from left to right.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 4.5 cm

Electrical:
- Max current: 60mA.
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
- black screws
- black fibre washers
Read more
MRP:$111.08 SAVE 20%
 1 in stock $89.33
Click for better price!
or call +44 20 7424 1960
quote 776662
ADDAC System ADDAC203 CV Mapping Module (gold faceplate) ADDAC System ADDAC203 CV Mapping Module (gold faceplate)
Cat: 776164 Rel: 08 Sep 20
 
CV mapping module
Notes: With the ADDAC203 CV mapping you'll be able to tame that voltage range and put it where it belongs. The attenuation knob compresses your voltage range and then you can also offset it.

Two channels for your mapping needs.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 3 cm

Control Voltage I/O:
- CV inputs: i 10v
- CV outputs: i 10v

Electrical:
- Compatible with +-12v and +-15v power supplies?
- Max current: 50mA
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$195.03 SAVE 19%
 1 in stock $157.14
Click for better price!
or call +44 20 7424 1960
quote 776164
ADDAC System ADDAC807A+ Individual Channel Stereo Outputs Module (black faceplate)
Cat: 776667 Rel: 08 Sep 20
 
Stereo outputs module
Notes: Dedicated expansion for the ADDAC807 VC Summing Mixer

Features 5 individual track post fader stereo outputs.

6HP
2 cm deep
0mA
Read more
 1 in stock $89.33
Click for better price!
or call +44 20 7424 1960
quote 776667
ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate) ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate)
Cat: 776345 Rel: 08 Sep 20
 
Slew generator module
Notes: Inspired and officially licensed from Teia's Stochastic Function Generator which was introduced in 2013 but is no longer available. This earlier version served as an inspiration, but with a completely rebuilt and reprogrammed mcu to a fully featured 4 voice 2 stage envelope and slew generator.

ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplateADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate
This expansion allows extra I/O to the ADDAC506, namelly:

Four trigger inputs for the random engine.

Four CV random outputs from the random engine.
Read more
 1 in stock $100.09
Click for better price!
or call +44 20 7424 1960
quote 776345
ADDAC System ADDAC102 VC FM Radio Module (red faceplate)
Cat: 773955 Rel: 08 Sep 20
 
FM radio module
Notes: This is Version 2 of this module, updated in order to be skiff friendly.

With the ADDAC102 FM Radio you'll be able to tune-in FM radio. Besides the ability of station broadcasts as sound generators for your synthesis, you can also have a lot of fun with the fact that its a great noise generator- the static picks up all kinds of great electromagnetic interference.

It provides controls like tune, volume and seek (all of them controllable through CV input) and there's two outputs for stereo sound.
Read more
MRP:$334.52
 1 in stock $322.89
Click for better price!
or call +44 20 7424 1960
quote 773955
ADDAC System ADDAC217 Quad Gate to Trigger Module (black faceplate) ADDAC System ADDAC217 Quad Gate to Trigger Module (black faceplate)
Cat: 776261 Rel: 08 Sep 20
 
Gate to trigger module
Notes: Following ADDAC System's T-Networks series, the importance of having the right input signal for firing drum modules or envelopes was realised. Gates and Triggers are often looked at as similar signals but at times it really makes a difference and results will change drastically depending if a Gate or a Trigger is fed to the input of such modules.

This led to the simple yet effective Gate to Trigger.
A four channel converter with bypass switch for each channel.

Any input Gate will be limited to a 1ms Trigger.

Tech Specs:
3HP
2.5 cm deep
10mA +12V
10mA -12V
Read more
 1 in stock $82.88
Click for better price!
or call +44 20 7424 1960
quote 776261
ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate) ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate)
Cat: 776125 Rel: 08 Sep 20
 
Expansion module
Notes: The ADDAC111B EXPANSION allows the user to access the first 8 files (a to h) through a trigger.

Files do not play simultaneously, if several triggers happen at the same time top priority goes from top to bottom- meaning that if B E and F triggers are received at once the file that will be played is file B.

The expansion module should be plugged to the back of the Ultra .Wav Player module. There's no connection to the bus boards.

Specificaitons:
Mechanical:
Format: Eurorack
Width: 16 hp
Depth: 3 cm

Control voltage i/o:
CV inputs: i 5v
CV outputs: 0 +10v

Electrical:
Max current: 150ma
Compatible with +-12v and +-15v power supplies
Bus board cable: 8x2 idc (doepfer style) connect
Read more
 1 in stock $133.46
Click for better price!
or call +44 20 7424 1960
quote 776125
ADDAC System ADDAC216 Sum & Difference Module (black faceplate) ADDAC System ADDAC216 Sum & Difference Module (black faceplate)
Cat: 776260 Rel: 08 Sep 20
 
Sum & difference module
Notes: There are two equal sections in this module labeled A and B.

This module is a peculiar type of mixer that instead of just summing two input signals (X & Y) it also allows the possibility to subtract the two signals.
It works both for audio and CV signals and hence the possibility to get the diference of two CVs or cancel the phase of two audio signals. The resulting signal, of sum or subtraction, is then routed through a switchable (on/off) full rectification circuit labeled: Absolute. After this the gain of the mixed signal goes through another attenuverter labeled: Amplitude to control the resulting signal gain which, being an attenuverter, also allows the possibility to invert the incoming signal. After the Amplitude comes an AC/DC coupling switch followed by an bipolar Offset knob.

Besides the normal output, there's also an inverted output for each of the A & B sections.

The outputs of section A & B are also summed and sent to the Average Output.

Using a single input, just the X or Y input, the module can also be used as a simple dual Attenuverter & Offset CV processor with full rectification and AC coupling options.

Average mix output of both sections.
Read more
MRP:$139.49
 1 in stock $137.78
Click for better price!
or call +44 20 7424 1960
quote 776260
ADDAC System ADDAC222 4x6 Voices 1V/Octave to MIDI Notes Module (red faceplate)
Cat: 776268 Rel: 08 Sep 20
 
MIDI notes module
Notes: Most recent from the ADDAC MIDI Series, the 222 converts 4 CV inputs to four distinct polyphonic MIDI NOTES streams, with up to 6 note voices per input. This allows the user to send midi notes to external midi devices straight from your modular: just plug it into your classic synth or your favourite virtual instruments. Combined with the ADDAC221 you can fully control any external midi device.

Ships with 2 stereo jack to din5 midi cables.
Read more
 1 in stock $401.47
Click for better price!
or call +44 20 7424 1960
quote 776268
ADDAC System ADDAC302 Nchunk Control Module (red faceplate)
Cat: 776295 Rel: 08 Sep 20
 
Control module
Notes: The ADDAC302 Nchunk Control module allows you to connect a Nintendo Nunchuck controller to your modular synth, featuring a two-axis thumb joystick, a three-axis accelerometer and two trigger buttons.

The module provides CV outputs for all of the Nunchuck's parameters and special functions to remap the CV outputs. The remapping can be both continuous or step-by-step and can be accessed through either the dedicated CV inputs or the manual controls.

A specially dedicated Mix output averages between the first two CV outputs, a very useful feature for continuous control parameters.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 4 cm

Control Voltage I/O:
- CV inputs: 0 - 10v
- CV outputs: 0 - 5v
- Gate in threshold: 2.5v

Electrical:
- Compatible with +-12v and +-15v power supplies
. Max current: 100mA?
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $278.77
Click for better price!
or call +44 20 7424 1960
quote 776295
ADDAC System ADDAC803 Quadraphonic Spatializer Module (red faceplate)
Cat: 776406 Rel: 08 Sep 20
 
Quadophonic spatializer module
Notes: This is ADDAC System's Quadraphonic output module.

Using the VBAP (Vector-Base Amplitude Panning) principle, it allows to position a mono signal over a quadraphonic speaker array for sound spatialization. The VBAP algorithm can be controlled by Cartesian or Polar methods

Sound path is fully analogue featuring 4 high quality VCA's.

Featuring both 1/4 inch and 3.5mm jacks for adapter free connections.

Four 16 bit CV outputs mirror the signal sent to the VCA's control, when connected to 4 external VCA's these can be used for Polar Mixing of 4 diferent sound sources.

The 2 Filter CV outputs react according to the distance from the center point. The + output increases as the sound gets further away from the center of the room allowing to sync a Low Pass Filter to the input sound so that as it moves away from the center the High Frequencies get attenuated further increasing the spatialization experience. Another good practice would be to sync a reverb dry/wet signal as well so that the sounds gets more difused as it moves away from the center into the horizon.

Both the filter and the reverb should be plugged between the sound source and the 803, in order for the incoming sound to be processed before being routed to the 4 outputs.

The X and Y CV outputs mirror the cartesian sound position between 0 and +5v.

Mechanical:
. Format: Eurorack
. Width: 14 HP
. Depth: 6 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: + 5v

Electrical:
. Compatible with +-12v and +-15v power supplies?.
. Max current: 150mA on positive rail, 100mA on negative rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $445.59
Click for better price!
or call +44 20 7424 1960
quote 776406
ADDAC System ADDAC501 Complex Random Module (red faceplate) ADDAC System ADDAC501 Complex Random Module (red faceplate)
Cat: 776328 Rel: 08 Sep 20
 
Random CV generator module
Notes: The ADDAC501 does random CV generation and outputs it through four independent channels. You can control the desired range of voltages and time frequency at which new values are generated.

It can also be triggered by an external CV source and the output voltages can be either free or quantized (if you prefer to have a standard C Major scale).

Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 5 cm

Control Voltage I/O:
- CV inputs: 0 - 10v
- CV output: 0 - 5v (0 - 10v through jumper)
- Gate in threshold: 2.5v

Electrical:
- Compatible with +-12v and +-15v power supplies
- Max current: 150mA
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $334.73
Click for better price!
or call +44 20 7424 1960
quote 776328
ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate) ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate)
Cat: 776329 Rel: 08 Sep 20
 
Expansion module
Notes: The ADDAC501B expansion is connected directly to the ADDAC501 Complex Random. It extends functionality by adding gate outputs to the random generators.

If ADDAC501 generates a new random above the average between Minimum and Maximum, then the respective gate on ADDAC501B is triggered.

There are three pairs of gates, corresponding to the respective outputs on ADDAC501. Each gate pair has both positive and inverted outputs.

This expansion module also offers a dedicated knob for gliding effects. With it you can have a voltage ramp between two consecutive random numbers- randomized "legato" expressiveness.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 5 cm

Control Voltage I/O:
- Gate outputs: 0 - 5v

Electrical:
- Connects directly to ADDAC501
- Max current: 20mA
Read more
 1 in stock $133.46
Click for better price!
or call +44 20 7424 1960
quote 776329
ADDAC System ADDAC604 Dual Filter Module (black faceplate) ADDAC System ADDAC604 Dual Filter Module (black faceplate)
Cat: 776353 Rel: 08 Sep 20
 
Dual filter module
Notes: Really nice stuff here. The filter circuit from ADDAC's 4 Voice Cluster module gets reimagined as a multi-mode stereo or dual mono filter module. A lot of filter action in just 6hp.

Supplier's Notes:

While developing the ADDAC105 4 Voice Cluster module, a new multimode filter to place after the summing mix stage- and the results were so postitive that it was released as a dedicated filter.

To make it more interesting, the circuitry was duplicated, to be able to use it in a stereo signal path.

To make it more versatile, a switch was added to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.
In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.
This allows immediate sync of both filter frequencies when the Stereo position is engaged.
Optionally there's a jumper in it's back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V
Read more
 3 in stock $202.36
Click for better price!
or call +44 20 7424 1960
quote 776353
ADDAC System ADDAC611 Gotharman's VC Tube Filter Module (black faceplate) ADDAC System ADDAC611 Gotharman's VC Tube Filter Module (black faceplate)
Cat: 776355 Rel: 08 Sep 20
 
Tube filter module
Notes: This module was developed upon the Tubaz Filter which was released in 2014 by Gotharman but is currently no longer in production. We loved the original module so much that we officially licensed it's circuit and expanded it to feature several new functionalities.

Here's a paragraph from Gotharman regarding the original design:
"I designed it with the purpose of adding crunch, edge and distortion to my eurorack system. It is not an ideal bandpass filter, that cuts off all frequencies above and below the center frequency.
Because of its high drive, there are, in most cases, some bleedthrough of the harmonics, that should have been cut off. You might consider calling it a "Band Add" filter. The main purpose of it, was to add edge, not to be a perfect bandpass filter."

While everything he mentions is still true we believe he was being modest, It's a dirty, gritty, growling and whining monster which promises you some of the most peculiar filter sounds you'll ever hear.
However do not classify it as a "weird" distortion unit just yet because besides this hairy character it can be easily tamed (using lower volume levels) and then, with some care and intention from the user, it will transforrm itself showing it's feline purrrrr and cuddle sweet and caring, or like any good mut, showing up at night all happy, wet and dirty from a full dog's day and will lay down at your feet while wiggling it's tail howling as yawning just happy to be back home.

As such, standard volume principles do not quite apply to these units, the Audio Levels will go up to x2 amplification, Drive will go up to x11 and master outs go up to x2. The combination of these will cover all diferent qualities it can present. Overall sound can be distorted pre-Tube (raising input levels), in Tube (raising drive) or post-Tube (raising Out levels).
Higher Inputs and Drive will always be gritty, lower Inputs and Drive volumes together with higher Output levels will make the overall behaviour more mellow and closer to what a typical filter would behave like.

No standard expectations should be considered when acquiring these units, all of the tubes were built in the 70's and were bought from various sources, we always kept the premise that no tube was a bad tube (unless not really workinng) so due to each specific characteristics no module will sound exactly the same, making each unit particularly unique. This uniqueness will be particularly evident on their resonance/self-oscilating timbre as well as in their own microphonic qualities.

Regarding power and current draw, the module is designed using a low power tube, so it won't starve your eurorack power supply.

Tech Specs:
12HP
3.5cm deep
90mA +12V
60mA -12V
Read more
MRP:$355.19
 1 in stock $353.03
Click for better price!
or call +44 20 7424 1960
quote 776355
ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate) ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate)
Cat: 776437 Rel: 08 Sep 20
 
Pre-amp module
Notes: The Phono Pre Amplifier module- connect your turntable to it and bring it's sound straight into any of your patches.

Specs:
- Width: 4 HP
- Depth: 4.5 cm
- Current: 40mA
Read more
 1 in stock $133.46
Click for better price!
or call +44 20 7424 1960
quote 776437
ADDAC System ADDAC812VU Audio Meter Module (black faceplate)
Cat: 776439 Rel: 08 Sep 20
 
Metering module
Notes: Stereo/dual VU metering module with buffered thru outputs for each channel.

An additional switch turns the beautiful lamps behind the VU meters off, in case your rack is running low on power!

A couple trimmers on the back of the module allows the user to define the VU range of each channel independently.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 3.5 cm

Electrical:
- Max current with lamps on: +100mA/-10mA
- Max current with lamps off: +10mA/-10mA
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $145.29
Click for better price!
or call +44 20 7424 1960
quote 776439
ADDAC System ADDAC221 10x9 Channel CV to CC MIDI System Module (red faceplate)
Cat: 776266 Rel: 08 Sep 20
 
Controller module
Notes: The ADDAC221 is a standard midi controller that allows CV inputs, converting CV variations to MIDI Control Change Messages. This allows interaction with your favourite standalone synthesisers and softwares through simple plug-and-play midi control.

A dedicated software permits the user to store up to 9 different presets, where the CC values of each channel can be configured as wished.

This way the user can preset his favourite synths to control filters, envelopes and whatnot from CC messages coming from the module CV inputs.

Ships with 2 stereo jack to din5 midi cables.
Read more
 1 in stock $357.33
Click for better price!
or call +44 20 7424 1960
quote 776266
ADDAC System ADDAC301 Floor Control Module (red faceplate)
Cat: 776281 Rel: 08 Sep 20
 
Floor control module
Notes: While ADDAC were working on the new VC Stompboxes several expression pedals were tested and it became clear that most often, while playing a modular system, your hands are busy.
It's also normal to have an expression pedal lying around somewhere, so ADDAC have brought these back, cleaned up the dust and put them to good use.
This module allows the connection of any standard expression and sustain pedal.

The expression pedal action can be fine-tuned with Range and Offset knobs.
Range defines the voltage range (-10v, +10v).
Offset transposes the range by (-5v, +5v).
Two leds, plus and minus, monitor the CV Output
Positive and inverted output jacks.
The sustain pedal action will generate a gate signal on the gate output.
One led monitors this output.
The module also features a bus board +5v Adaptor, this will be able to provide +5v to any bus board.
This feature can be removed through a jumper on the back of the module.

Specs:
- Width: 4 HP
- Depth: 4 cm
- Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $78.57
Click for better price!
or call +44 20 7424 1960
quote 776281
ADDAC System ADDAC301B Dual Expression Pedal Attenuator Module (red faceplate)
Cat: 776289 Rel: 08 Sep 20
 
Dual epression pedal attentuator
Notes: Passive dual expression pedal attenuator.

Plug any CV or audio source through it and control its amplitude through any standard expression pedal.

Invert switch for inverting the expression pedal action.

Specs:
- Passive Module
- Width: 4 HP
- Depth: 3 cm
Read more
MRP:$72.33
 1 in stock $72.11
Click for better price!
or call +44 20 7424 1960
quote 776289
ADDAC System ADDAC401 Gated Envelope Follower VS2 Module (red faceplate) ADDAC System ADDAC401 Gated Envelope Follower VS2 Module (red faceplate)
Cat: 776309 Rel: 08 Sep 20
 
Envelope follower module
Notes: With the ADDAC401 Envelope Follower you'll be able to use the volume of any sound source to control your synthesis.

This envelope follower has an interesting twist: besides outputting the volume information through a regular CV output, it also sports 8 independent gate outputs, triggered by the corresponding levels of the VU meter.

You can also control the offset on the gated outputs, either by CV or by steps through a special dedicated gate input.

Input Level and Decay controls allow you to achieve good envelope follower amplitude reaction.

Envelope Gain and Offset allows to set the envelope CV output to any desired CV range.

Monitor Leds for both the CV output and for the digital detection circuit.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 4.5 cm

Control Voltage I/O:
. CV output: i10v
. Gate input: 0 - 5v (threshold: 2.5v)
. Gate outputs: 0 - 5v

Electrical:
. Max current: 110mA +12v & 20mA on -12V
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $256.16
Click for better price!
or call +44 20 7424 1960
quote 776309
ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate) ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate) ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate) ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate)
Notes: All you could ever dream of from an Eurorack console, and then some.

The ADDAC807A VC Stereo Summing Mixer offers you the power, the flexibility and the gorgeous layout of a high-end audio console, in the popular Eurorack format. Starting off at 5 stereo channels, with the option to add 4 additional stereo channels via the ADDAC807C Expansion Console, its send/return options and clever matrix will ensure you have that perfect mix down in seconds. Customary to ADDAC System designs, there is enough CV control and hands-on switch options to make the ADDAC807A into an instrument in and of itself.

The ADDAC807A is accompanied by its sibling, the ADDAC807B Inputs Console. We decided to allow the user to freely define the placement of the jacks by separating the area where all your cables are located. Less clutter means more hands-on control and higher playability. The ADDAC807B Inputs Console holds all the jack inputs for the ADDAC807A Main Console, along with CV inputs and additional channel settings cause you can never have enough switches.

MECHANICAL:
Format: Eurorack
ADDAC807A Width: 56 HP
ADDAC807B Width: 24 HP
Depth: 4.5 cm
Weight: 1.5 kg (3.3 lb)

CONTROL VOLTAGE I/O:
CV inputs: i 5v

ELECTRICAL:
Max current: 650mA on each rail
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $1,574.67
Click for better price!
or call +44 20 7424 1960
quote 776434
ADDAC System ADDAC200S Size Matter Module (red faceplate)
Cat: 776135 Rel: 08 Sep 20
 
Adapter module
Notes: ADDAC System's 1/4 to 1/8 inch adapter allow you to connect one 1/4 inch jacks to an 1/8 inch one right in from your rack- now you can leave all those cable adapters behind.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 3.5 cm

Electrical:
- Passive
Read more
 1 in stock $58.77
Click for better price!
or call +44 20 7424 1960
quote 776135
ADDAC System ADDAC503 Marble Physics Module (red faceplate) ADDAC System ADDAC503 Marble Physics Module (red faceplate)
Cat: 776332 Rel: 08 Sep 20
 
Marble physics module
Notes: Newtonian physics on a modular synth! The ADDAC503 Marble Physics is a CV generator based on the mechanics behavior of a marble on a tray.

Through this realtime physics simulator you'll be able to control several parameters that will affect the behavior of a model of a spherical object against a plane. You can tilt the plane or bump the marble with a certain strength, which will cause it to roll and bounce on elastic walls.

The model will output the object's XY position or velocity and you can control other physical parameters, like the walls' elasticity or the strength of a bump. When the marble hits walls the bounce output triggers and you can additionally lock the X axis for a one dimension simulation. Finally you can also set the overall speed of the simulation.

By controlling all of these properties you be able simulate several scenarios where the marble falls, gets gently pulled by gravity, orbits indefinitely or bounces on walls like a pinball. Truly engaging physics simulations!

Mechanical:
. Format: Eurorack
. Width: 10 HP
. Depth: 5.2 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 5v

Electrical:
. Max current: 150mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $368.09
Click for better price!
or call +44 20 7424 1960
quote 776332
ADDAC System ADDAC602 Passive Ring Modulator Module (red faceplate)
Cat: 776350 Rel: 08 Sep 20
 
Ring modulator module
Notes: A dual channel classic Passive Ring Modulator, with transformers and germanium diodes.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 3.5 cm

Electrical:
- Passive
Read more
MRP:$133.03
 1 in stock $127.00
Click for better price!
or call +44 20 7424 1960
quote 776350
ADDAC System ADDAC702 Dual VC Filter Module (black faceplate)
Cat: 776359 Rel: 08 Sep 20
 
VC filter module
Notes: Here's our first Voltage-Controlled Variable Filter, inspired by the original MS-20 filter.

This module features:

Two independent filters, a High-Pass and a Low-Pass with dedicated audio inputs and outputs.

Besides individual outputs the HP and LP are also sent to a voltage-controlled Mix between the HP and LP filters.

Both Cutoff and Resonance are voltage-controlled with dedicated cv attenuator pots.

Switch for selecting between normal cutoff behaviour and an adjustable Smooth circuit to simulate a vactrol behaviour for cutoff control.

Switch for setting filters Filters in Parallel (independent) or Series (HP > LP).

Inspired by the Oscar synthesizer we added a Coupling switch to tie the HP Cutoff control to the LP Cutoff control, in this case the LP cutoff controls act as an offset from HP setting.

Three position switch selects different resonance clipping paths: diodes / no clipping / leds.

Both filters features a post Distortion/Fuzz circuit that adds extra harmonics adds an even deeper growl or extra gritiness to it.

All audio outputs (HP, Mix, LP) feature a switch for choosing phase output, allowing additive or subtractive mixes.

Three Leds monitor the amplitude of the three outputs (HP, Mix, LP).
Read more
MRP:$410.73
 1 in stock $396.10
Click for better price!
or call +44 20 7424 1960
quote 776359
ADDAC System ADDAC206 Switching Sequencer Module (red faceplate) ADDAC System ADDAC206 Switching Sequencer Module (red faceplate)
Cat: 776180 Rel: 08 Sep 20
 
Switching sequencer module
Notes: This is a Quad Channel Switcher.

Among many other possibilities it allows to:

Turn any 4x4 step sequencer into a 16 step sequencer.
Scramble sequences with diferent clock division settings.
Route 1 audio or voltage signal to 4 diferent destinations.
Switch between 4 audio or voltage signals

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 3.5 cm

ELECTRICAL:
Max current: +80mA/-40mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.
Read more
MRP:$299.65
 1 in stock $299.21
Click for better price!
or call +44 20 7424 1960
quote 776180
ADDAC System ADDAC307 Heart Sensing Module (black faceplate) ADDAC System ADDAC307 Heart Sensing Module (black faceplate)
Cat: 776307 Rel: 08 Sep 20
 
Heart sensing module
Notes: Another addition to the ADDAC300's Expressive Controls Series.

Preceded by the release of the ADDAC303 Muscle Sensing module, this is the second module made to take advantage of the physical body as a control source.

This module originated from a simple idea: using one's heart beat as a control source.

Using a clip-on sensor, that can be attached to a finger or an ear lobe, the user's heart rate will be aquired by sensing the blood flow passing under the sensor. This pulse will generate a trigger and an AD envelope.

Clip-on sensor will be provided with the module.

Tech Specs:
4HP
3.5cm deep
60mA +12V
10mA -12V
Read more
 1 in stock $178.67
Click for better price!
or call +44 20 7424 1960
quote 776307
ADDAC System ADDAC208 Comparator & Rectifiers Module (red faceplate)
Cat: 776183 Rel: 08 Sep 20
 
Comparator module
Notes: A Comparator is an electronic circuit that compares two voltages and switches its output to indicate which is larger. The Comparator operates between -10 or +10V

The Output is always -10V if below Threshold and +10V if above Threshold.

A Rectifier is an electronic circuit that is used to transform AC signals to an equivalent DC signal while removing one of it's polarities, i.e. Positive rectification excludes negative signals and vice-versa.
Both sections can be used to change the shape of any waveform as well as its harmonic content.

FRONTPANEL:
1 Comparator Threshold Knob
1 Comparator Jack Output
2 Comparator Monitor Led1 Common Signal Jack Input
4 Rectificated Outputs

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $133.46
Click for better price!
or call +44 20 7424 1960
quote 776183
ADDAC System ADDAC212 EG Map Pack Module (red faceplate)
Cat: 776195 Rel: 08 Sep 20
 
VC attentuator/offset module
Notes: A 4 Channel VC Attenuator and Offset.

The ADDAC212 is a 4-channel VC attenuator and off-setter. It lets you deal with up to four parallel inputs as a single pack, modulating their amplitude and offset (± 10V) with the same control knobs, both with cv inputs and dedicated attenuators.

Features 4 parallel VCAs with the same amplitude and offset control knobs and cv inputs with dedicated attenuators.

Idealized to be the perfect companion for Envelope Generators, you can send 4 EGs through it and control the overall amplitude and offset of all 4 envelopes at once. This allows more control over the Envelopes when patching typical synth voices.
Read more
 1 in stock $201.27
Click for better price!
or call +44 20 7424 1960
quote 776195
Items 1 to 50 of 887 on page 1 of 18
1  2  3  ...  18  »

Filter

Saved Searches
Save current search
Release Date
Close