Notes: The Rakit GO! will take care of your portable eurorack fix. Now you'll be able to take your modules everywhere. What's more, the GO! has a slew of protection features built in, protecting your GO! module, supply/powerbank and greatly reducing the chance of damage to modules through user error. The power supply has a robust and reversible USB C connector for the best possible USB connection. The GO! has been engineered from the ground up, making full use of 5V powerbanks/supplies that are widely available on the market. At only 2hp wide and 27mm deep, GO! is ready to fit in any case.
To start using your GO! power supply you will need a passive bus board and your choice of 5V powerbank or USB AC adapter.
- Supply/Powerbank protection - reverse voltage, overcurrent (fast eFuse)
- GO! Input protection - reverse voltage, overvoltage, undervoltage, overcurrent (fast eFuse)
- Module protection - all rails current limited and overvoltage protected
- +12V & -12V LEDs indicate bus health (very dim below +-11.75V)
- GO! Module
- 18W High Quality USB C Cable
- 16 way ribbon cable
- 2 x M3 Screws
Compact interface module for incorporating audio signals - 14HP
Notes: Erica Synths Black Input module interfaces your modular system with other instruments. It features a preamp, versatile envelope follower and most importantly - an accurate, low latency pitch tracker that converts incoming audio into CV, so you can play your modular synth in unison with any external monophonic instrument, even a voice.
Notes: Erica Pico LPG is our take on classical Don Buchla LPG designs. We use vactrols in the circuit for that signature sound, and we added some more features, like configurable resonance and built-in decay envelope.
Notes: Erica Synths Black Sequencer takes the classical modular sequencing to the next level by adding tons of features required for contemporary modular synthesizers. Black Sequencer features 4 channels with CV, gate and modulation outputs, up to 64 step sequences that can be chained in longer ones, independent track time divisions, multiplications and lengths. CV and Gate recording, built-in quantizer, MIDI in/out and many other features essential for composing and performing electronic and experimental music. Even though it provides many programmable parameters per step, it's intuitive, easy and straight-forward to use, and, we believe, it will become a master controller of many modular setups.
Notes: Erica Synths Black Spring Reverb is a different take on spring reverberation units. Firstly, it has a built-in compact spring reverberation tank and vactrol-based audio compressor, secondly, it can operate an external tank and combination of both internal and external ones for effects unheard before. Thirdly, apart from feedback send-return loop, it has built-in feedback effects - delay, various filters, etc; feedback amount and effect parameters can be controlled manually and via CV, making the module an experimental instrument on its own.
Portable 2HP power module for compact skiff cases with dual passive mults
Notes: The power module from Endorphin.es is a module for the power supply of smaller modular systems such as skiff cases up to 104 TE width. The module consumes DC power between 12 and 20 volts from an external power supply unit. Voltages of up to +1000 mA and -700 mA are output, also depending on how strong the connected power supply is. In addition, there are two passive multiples.
Notes: Airstreamer is a function generator with AD, ASR and loop mode. The curves can be altered in shape. A 1V/octave input makes it possible to play the module like an oscillator.
- Fast and effective envelope generator with variable slope curves and three modes: looping, attack-sustain-release (ASR) and attack-decay (AD)
- 320 khz samplerate, zero aliasing CV generation
- 1v/oct input, bipolar and unipolar outputs, selectable end of cycle outputs
- Thru-zero VCA input that inverts the envelope when CV goes to negative voltages
Stereo filter with voltage controlled resonance - 6HP
Notes: The Squawk Dirty To Me is a stereo filter with voltage controlled resonance. It features eight filter modes and zero-delay feedback.
- Simple and effective 6hp stereo VCF
- 8 filter modes available with meta CV scanning, famous zero-delay feedback Grand Terminal filters
- Additional hi-pass filter in series quickly cuts the boomy low end
Clean/character auto compressor & distortion - 4HP
Notes: Autodyne is a 4hp auto-compressor/distortion featuring a multi-mode side chain filter and NY style parallel compression blend control.
Ratio, Threshold and Gain are all built into a single, simple to use COMP control. Compression gets more extreme as this control is swept past centre position. Setting below centre offers more subtle/typical compression.
Autodyne Automatically Responds to Transients, will glue a mix with ease and dial in the perfect feeling of the program material you feed into it.
GAIN CONTROL to trim the final output gain or offer up some extremely brutal distortion, whichever you prefer.
Switchable Side Chain Filter is provided along with a triple slope high pass filter, in order to retain lower frequency content and unwanted over-compression by removing them from the Side Chain. Input signal is normalized into the Side Chain or an external signal may be utilized via the Side Chain Input.
Parallel Compression BLEND Control mixes the unaffected input signal with the compressed output for even further control of your sound. Compression may be bypassed simply by sweeping this control to minimum position.
Controls are simple enough to match in tandem for dual unit, stereo operation, if desired.
Audiophile grade discrete components and Burr-Brown op amps used throughout.
4HP voltage expander module for the METRON trigger & gate sequencer
Notes: Voltera is a voltage expander module for the METRON trigger and gate sequencer and adds 4 bipolar voltage tracks in 4hp. Up to 16 Volteras can be added to a single METRON giving you up to 64 CV Sequencing lanes for your Eurorack modular system!
With independent voltage ranges and quantize settings per track, Voltera allows for real time control over 4 different parameters at once, allowing you to dial that track to the parameter you are sequencing.
Sequence melodies, modulate parameters, and more with ease by adding Voltera to your METRON set up.
Notes: The Endorphin.es Godspeed is sort of the single oscillator version of the famous Furthrrr Generator. From its big brother it takes over the digital Thru-Zero core and the legendary wavefolder. But it also has new features like a sub-oscillator output and an immensely practical autotune function.
Especially for people starting with a modular system this oscillator is highly recommended. On 6HP it delivers all the features (and more) needed for diving into the depths of West-Coast-Synthesis!
Notes: Originally inspired by audience applause, hip-hop samples, and classic drum machines, Fracture is a multi-particle percussion synthesizer that applies concepts from classic analogue clap circuits to granular synthesis methods.
It all starts from proprietary micro-samples we recorded specifically for this purpose and ends with an engine built to suit these samples.
Unlike our other percussion module, the Chimera which uses impulse rich samples as it's tonal centre, Fracture uses single impulse samples like Claps, Snaps, Ping Pong Balls, Opening a beer can, and many more. It then plays a group of similar samples back in a psuedo random order for unique hits. Density, Decay, and Tail affect tone and how "tight" your virtual clappers are to playing together.
Our goal was to design a clap percussion module covering the range from classic drum machine claps all the way to full audience applause. We ended up with a module that covers a huge range of timbres beyond claps. We hope this engine provides you with the tools to intuitively create wild percussion sounds that bring your system to life in a new way.
Notes: The Mimeophon music synthesiser module is a stereo, multi-zone colour audio repeater by Make Noise and soundhack, coded by Tom Erbe.
The Mimeophon (from Greek mimeo (repeat/copy) and phon (sound)) is a modern take on various historical sound copying, echo and repeating devices. It allows for Stereo modulations of Time, Space and Timbre of Mono or Stereo sound sources. The Mimeophon is capable of modulating and morphing time scales of repeated sound from micro-sound to note to phrase length while also colouring and spatializing the repeats.