Search dance music

Notes: Use this cable to connect your Bluebox to a data source and a power source at the same time. This will allow you to stream audio over USB. The cable has a USB B male connection on one end and two USB B female connections on the other end: red for power and black for data.

Stream Audio Over USB with Bluebox

If you bought a Bluebox for desktop before September 2023, this handy adapter will make it easier to connect your device to a computer. New firmware allows you to send audio from the bluebox to the computer and back.

The adapter splits the power from the USB signal to help avoid noise from your computer. It also enables you to power the device separately in case your computer or hub is not suitable for the demanding power requirements of the Bluebox.

Connect the male end to the USB Power port on your Bluebox. Then connect your bluebox USB B power cable to the red female jack, and a USB B data cable to the black female jack and you are ready to stream audio.

Specs

Length: 3.25", 8.25 cm

Weight: 1.2 oz, 34 grams
Dimensions: 6.5 × 2.5 × 0.75 in

Notes: Expand the lid from your case to be another powered rack. This set includes:

Rails
Handle and handle supports
Powered bus board
Case wiring
AC/DC power adapter
All hardware and thermal tape to complete the conversion

Notes: 104hp wide with two 3U rows and a 1U row.
Powder coated aluminum construction
VESA mount compatible (100mm x 100mm)
Plastic handle for easy mobility
Metal feet can be installed to support multiple angles of jamming.
Secure latching lid with enough depth to keep your patches patched

Expandable

Lid - when you're ready to add more space, the lid can be expanded to be another 104hp x 7U. You can add another set of rails, power supply and power jack and double your available space. (Kit available)
Metal feet - The metal feet can have a pair of rails and rack mounted power added to support another 3U row of 104hp. (Kit available in future)

Connectivity

Audio jacks - set of four jacks for stereo in and stereo out.
MIDI jacks - DIN jacks to support IN, OUT, and THRU MIDI.
USB power - can be used for a lamp to light your case or to charge your phone while recording your set.

Dimensions
557mm x 334mm x 169mm
74mm depth for 1U and bottom 3U row
52mm depth for middle 3U row

Power
+12V - 3A (with plenty of allowance for in-rush current)
-12V - 3A
+5V - 3A (shared with USB power)
36 shrouded power headers

In The Box
Main case
Lid
Metal feet
Power adapter 20V at 6A

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: These are skinny (sometimes called noodle) patch cables for Eurorack. This is a pack of five cables, size 6", pink in colour.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: This is a pack of five, 12" skinny patch cable for Eurorack. Colour is green.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: This is a pack of five, 24" skinny patch cables for Eurorack. Colour is black.

Notes: Neatly implemented performance mixer with four stereo channels. CV control of level and pan, two pre- or post-fader stereo send busses, quiet mutes and cueing via a front-panel headphone socket.

Supplier's Notes:
Four channel stereo production mixer

Mixer section

Each channel has the following:

Stereo or mono - Each channel can be treated as a stereo channel or a mono channel with two summed inputs.

CV inputs for both panning and level control

Two send buses - You can route each channel to one of two send buses. Each send bus is stereo. You can choose if you want the send to come before or after the level/panning controls.

Mute - The mute has both latching mute (up) and a momentary mute (down). The mute uses a capacitor to slow the turn off and on of the mute action. So it is mostly click-less, but you may find an occasional pop.

Cue bus - You can route each channel to the cue bus.

Mains Section

Two stereo sends outputs
Two stereo returns - which can also be used to directly insert into the main mix.
Main stereo outputs - level controlled with the slider and stereo VU meter.
Main mono output - summed output of the main L&R. If you are after an 8ch mono mix, you can use each channel in stereo mode, use the level control to control the level and then pan control to control the levels of the two channels.

Cue Section

1/4" Headphone jack along with level control
Fader control to listen to the main mix, cue mix, or an adjustable mix of the two.
Expandable

Bartenders can be cascaded to create 8ch, 12ch, or 16ch mixer. The main level is what is sent the main level control can act as a group control.

Barbacks can be added to add 2ch to your mix. Barbacks can also be cascaded enabling up to a 16ch mixer configuration.

Send-VCA can be added for CV control of the level of the send.

DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 24hp
12V: 260mA
-12V: 225mA

Notes: A simple VC panner with CV-controlled level. The left input normals to the right input to give an easy way to add panning to a mono signal.

Expandable

Bartender, Barbacks, DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 4hp
12V: 40mA
-12V: 40mA

Notes: These rack screws for Eurorack can be screwed by hand for quick changes, or use a standard Phillips head screw driver.

Each Special Size M2.5 X 8mm stainless steel screw comes with a black nylon washer in a silver tin.

Notes: These rack screws for Eurorack can be screwed by hand for quick changes, or use a standard Phillips head screw driver.

Each Standard Size M3 X 8mm black steel screw comes with a black nylon washer in a gold tin.

Notes: Dual three channel voltage controlled panning mixer

Mixer section

Channel 1 and Channel 2 are three channel mixers with potentiometers to control level of three different inputs for each channel. Each channel then has a potentiometer to control panning as well as CV control for panning and level control

Panning and VCA

The VC panners are equal loudness panning and the VCAs for each channel are linear response.

Built-in LFO

There is a built-in LFO that is normalled to the panning CV input of each channel. CH1 gets the standard LFO and CH2 gets an inverse, enabling alternating channel panning. The default is to use a TRI wave for the LFO, but there is a jumper on the back to switch it to SQU.

Width: 12hp
12V: 140mA
-12V: 120mA

Notes: This is an expander for Bartender and Barback, enabling CV control of the level of the send bus of up to 8 channels.

Each section of four jacks has a cable to connect to the mixer modules. To get 4 channels to work with Barback you want to connect it to the last Barback in the chain of two. It will then pass along channels 3 & 4 to the next Barback.

Dimensions
2 HP

Current Draw
Module does not draw current

Notes: Two channel USB module.

Standard Mode - Send two channels into your USB device and receive two channels from USB.

Insert Mode - Send two channels to your USB device and get a copy of the sent signal in the outputs.

Toggle between the modes via a pair of jumpers on the back. The USB-B to USB-A cable is provided with the module. Why use the cutting edge USB-B? I felt the jacks were way more sturdy than mounting USB-C jacks vertically.

Expandable - Bartender, Barbacks, DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 4HP
12V: 10mA
-12V: 10mA

Notes: The GALACTAVISE is Allpedal's flagship compressor. Built with the musician's needs in mind, it boasts an uncompromisingly sweet compressor circuit with a Mix control for dialling in that perfect balance of compressed tone and clean tone.

The top end can often be make or break with many compressor circuits, so AllPedal also added the ability to adjust just the right amount with the Presence control. Made with the highest quality components for a low noise floor and road-worthy durability.

Let the GALACTAVISE blast your tone into orbit!

GALACTAVISE is the best guitar compressor pedal for musicians seeking to balance their sound's dynamics. As the best compression pedal on the market, it allows guitarists to control their volume levels efficiently, ensuring a consistent sound output. This guitar compression pedal is an essential tool for both studio recording and live performance.

As with all their effect pedals, AllPedal took special care in the GALACTAVISE's aesthetics with its finish, sophisticated artwork and anodized knobs.

GALACTAVISE is proudly made by hand in Paducah, KY in the USA using the latest cutting-edge technology in the pursuit of ultimate tone.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The 'Mega Milton' is a smorgasbord of handy all analogue utilities in just 8HP that will greatly extend the functionality of your Eurorack system.

It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analogue white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor.

All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input.

The 'Mega Milton' provides essential classic synthesizer building blocks for patching in any Eurorack system.

Ideal For

Incorporating stereo external sources easily into your Eurorack system.
Signal attenuation and basic mixing in a small space.
Building percussion sounds from an analogue noise source.
Producing clocked random to add interest and variation to patterns and sounds.
Adding gated 303 style slides to patterns.
Creating and Manipulating patterns with Sample and Hold.
Buffering and monitoring voltage across multiple VCOs or other destinations with no drop.

Tech Specs

Supply: +12V 70mA / -12V 70mA
Size: 8HP
Depth: 32mm

Notes: ***B-STOCK: Dent on the side, product in perfect working order***


Like a greatest hits of recent Analogue Solutions synths, the Ample combines sound elements from the Fusebox with jack patch points, a patch pin matrix, plus sequencer and CV touch pads from the Generator, creating something new and unique.

Supplier's Notes:
Ample combines the best elements of several of Analogue Solutions' recent products.

The sound elements of Fusebox
Jack patch points of Concussor Eurorack
Patch pin matrix of Vostok
Echo from Dr Strangelove
Sequencer and CV touch pads of Generator

It shares all this yet still has its own sound!

Ample can be as complex or as simple as you want it to be

This synth has been given a large and diverse number of controls, that along side the patch sockets, will give even the best and experienced synthesist endless possibilities.

This synth presents the controls in a user friendly and familiar synth layout that, together with this manual and other resources, enable even the new guy to get great sounds.

Synth - Percussion - Audio Processor

Ample is a compact analogue synthesizer. Analogue - as in really analogue. Aside from the MIDI chip (which has to be digital), everything else is totally analogue using real transistors and op-amps. There are no CPU stabilised and quantised circuits, no DCOs, no digital LFOs and no digital EGs, as found on other so called analogue synths. The circuitry is based on designs dating back to the mid-1970s. So Ample has a genuine old sound.

Circuits included

3x Analogue Oscillators

There are three analogue VCOs - each providing a wealth of features and modulation choices. VCO3 can easily be utilised as a LFO.

2x Analogue Low Frequency Oscillator

LFO2(/Sync) has a triangle wave output. VCO3 can be used as an LFO and has Saw, Triangle and Square wave modulation signals.

Analogue Filter

Ample uses a four pole 24bB per octave low pass filter.

Analogue Amplifier

The VCA can be set to THRU so it is always 'open'. This allows Ample to be used as an effects processor.

2x Analogue Envelopes

There are two EGs - each having full control over ATTACK, DECAY, SUSTAIN, and RELEASE.

Modulation

Great thought has been placed into modulation route choices, allowing a wide range of sounds to be produced, including percussion and 'modular' sounds further extended by patching with the jack sockets and pin matrix.

MIDI

MIDI is intentionally kept simple - so you can concentrate on making new sounds and making music - not getting tied up with SYSEX programming.

You get the all important control over filter cut-off using MIDI Velocity.

Patchable External CV Control Sockets

Ample has many input and output audio and CV sockets - to allow the synth to be effectively re-wired to make new sounds.

The sockets also enable it to be easily used with Eurorack and other modular systems. They can be patched together.

Sequencer

Ample has a vintage style 16 step sequencer.

Touch Keys

There are 6 touch keys that each output a set voltage. Use this to play the pitch or as modulation signals. A great tool for inspiration!

Pin Matrix

A neat way to patch the synth.

Echo

Nice lo-fi echo / delay.

Notes: A unique hardware synth, Aodyo's Anyma Phi uses physical modelling mixed with virtual analogue oscillators and filters, creating a versatile setup for sounds from resonant acoustic timbres to experimental hybrid sounds.

Supplier's Notes:
Explore and create your own sounds

Discover Anyma Phi, the essential physical modelling synthesizer. Your portal to creating new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

The best of both worlds

Anyma Phi blends the classic ingredients of electronic music, like oscillators and filters, with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Create Unique Sounds; sound design for all

The matrix provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation: Excite, Vibrate, Resonate, Global, and Animate.

Infinite Possibilities; a semi-modular powerhouse

Beyond the matrix lies an insanely powerful semi-modular synthesis engine where you can harness a wide variety of oscillators and effects, and control them effortlessly using an impressive modulator system. Going so deep into sound design has never been easier before with such a small box!

Anyma Phi Editor; standalone, but well-connected?

The Anyma Phi can hold up to 200 patches, and everything you need to create them is right on the machine. You can also benefit from the large screen of your computer (PC or Mac) to edit, manage and share patches even more easily, in a streamlined environment that displays all the synth modules at once and their interactions in real time. Learn more about the Anyma Phi's Updates and Downloads.

MIDI Controller; In tune with its environment

With its small form factor, it can sit on your keyboard, or anywhere on your desk. You can control it using any MIDI controller, keyboard or sequencer, with first-class support for wind controllers, like Sylphyo. And it also shines with World and microtonal music*!

Just Tap and Scratch; the world is your oyster

With its stereo input, you can also use the Anyma Phi as a versatile effects processor for your other gear, or use any external sound to excite its resonators and other physical models. And you don't even need a mic to get interesting sounds: just tap and scratch directly on the case of the Anyma!

Technical specifications:

Hybrid monophonic synthesizer, with physical modelling components
Memory: 200 patches
Stereo audio outputs:
L-R 1/4" mono line jack outputs
1/4" stereo headphone jack output
Stereo audio inputs:
1/4" stereo jack audio input
Internal piezoelectric mic when external input unplugged
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine:
3 oscillator slots (more than 40 types, including wind/string physical models, modal resonators, virtual analogue and digital algorithms)
5 effect slots (more than 30 types, including resonators, granular processors, and FM operators) along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots (more than 40 types, including envelope generators, LFO, curves, interpolators, slew limiters, sequencers, physical and algorithmic processes, etc.)
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with sidechain input and min/max/curve/smoothing
Responsive to pitch, pitch-bend, velocity, breath control/expression, as well as 4 other controller inputs (with MIDI learn)
External MIDI CC control for the matrix and the entire patch (via NRPN)
World-class microtonal support: up to 8 custom tunings, 50 onboard presets, onboard editor, MTS import/export
Built-in arpeggiator: 15 patterns, internal/external MIDI clock sync, custom triggers
Support for up to 3-note paraphony when building a patch
External audio processors
Automatic random patch generation (optional)
Free software editor/librarian (Mac/PC)
225 x 120 x 70 mm (8.9 x 4.7 x 2.8") and 900 gr (2 lbs)
Included: Anyma Phi, 5V PSU and USB cable
Designed and made in France

Notes: Incredible value as always from the latest version of Arturia's Essential 88-key MIDI controller. Pads, faders, rotaries and a large LCD screen. Excellent integration with DAWs and the included Analog Lab V plugin.

Supplier's Notes:
Control your DAW, play with MIDI hardware, and get hands-on with your own style of music-making with KeyLab Essential mk3 88. This full-range keyboard controller removes barriers and makes creativity simple, with expressive semi-weighted keys, idea-sparking creative functions, and the most inspiring music software included as standard.

The streamlined piano range keyboard

Expand your musical horizons with a semi-weighted 88-note keyboard that removes barriers and makes your creative life easier. From studio to stage, DAW to MIDI hardware, KeyLab Essential 88 mk3 keeps things simple so you can focus on your music with full piano-range expressivity.

Your essential ingredients for creativity

KeyLab Essential provides an array of useful & intuitive controls that'll get the job done. Enjoy a comfy keybed, tactile faders/encoders/pads, and thoughtful layout that'll make sense for your setup. Enjoy a hands-on instrument experience balanced with software flexibility.

The best DAW integration

Get creative right out the box with KeyLab Essential's custom DAW scripts, bringing pre-mapped controls into your workflow with any major DAW. Not only that, but the KeyLab Essential controls work seamlessly with Analog Lab V, the included sound anthology plugin - letting you freely explore thousands of sounds, old and new.

Your musical workhorse

For when you want to get experimental, find a new sound, or just need a bit of extra inspiration, KeyLab Essential has a few tricks up its sleeve. Create fun ever-changing melodies with the Arpeggiator, weave rich chord voicings with Chord play, and always stay in key thanks to Scale mode.

What's new compared to the previous version?

A bigger display with 4 contextual buttons
5 dedicated DAW scripts, plus MCU & HUI protocols, for controlling any DAW
Enhanced integration with Arturia Software
Creative features: Scale mode, Chord Play, Arpeggiator (with presets), Hold function
2 Pad Banks (for finger drumming, clip launching, or User configuration)
Bigger software bundle (Analog Lab V, Ableton Live Lite, NI The Gentleman, UVI
Model D, Loopcloud & Melodics)
Multi-purpose pedal input (Sustain, Footswitch or Expression)
USB-C
Eco-designed

Included Software

You'll also get 6 titles giving you everything you need to make music your own way - here's

What's included:
Analog Lab V software with 2000 synth & keyboard sounds
Ableton Live Lite
UVI Model D & Native Instruments The Gentleman pianos
Loopcloud subscription
Melodics subscription

Box content
Quick Start
Registration card
USB Cable (C/A)

Notes: The latest update of Arturia's legendary plugin collection, featuring 39 instruments, three expansion packs and over 9,000 presets. New instruments include CP-70 V, MiniFreak V, Acid V and three Augmented collections.

Supplier's Notes:
V Collection X

Reference instruments for music makers
A premium suite of software instruments for unparalleled sonic exploration; from evocative emulations and hybrid synth engines, to authentically modelled keyboards and beautifully captured acoustic sounds - enhanced for today's production workflow.

This is V Collection X

Immerse yourself in an unparalleled music-making experience with iconic sounds and essential tools to suit your style, performance needs and production workflow. 39 instruments, 3 exclusive expansion packs, thousands of world-class presets - 1 canvas for infinite sonic exploration.

The ultimate selection

A hand-picked, expertly-engineered suite of instruments combining timeless sonic craft with cutting-edge enhancements that seamlessly integrate with demanding production workflows. The most iconic synths, blissful keyboards, evocative hybrids and faithfully captured acoustic instruments for endless inspiration, vivid composition and boundless play.

10,000+ presets

Find the crucial mix-finishing sounds you need in a few clicks with V Collection X's expansive library of expertly-designed sounds, complete with easy browsing. Tap right into any style, any instrument, any time.

Easy to use

You don't need to be an expert to enjoy professional sound. The instruments in V Collection X are designed with accessibility in mind, equipped with intuitive interfaces, interactive in-app tutorials, and intelligent features that deliver electrifying results without hassle.

Perfected for you

High-performance features that you can count on, premium sound quality you deserve; V Collection X is the result of over 20 years of engineering innovation, musical exploration, and a passion for audio excellence and expressivity.

39 Software titles

Augmented WOODWINDS
Augmented GRAND PIANO
Augmented BRASS
Augmented STRINGS
Augmented VOICES
Korg MS-20 V
SQ80 V
CS-80 V
Prophet-5 V
Prophet-VS V
Piano V
Analog Lab V
Vocoder V
Jun-6 V
OP-Xa V
Mellotron V
Synthi V
CZ V
CMI V
Clavinet V
Acid V
MiniFreak V
CP-70 V
DX7 V
Buchla Easel V
Synclavier V
Emulator II V
B-3 V
Mini V
Stage-73 V
Matrix-12 V
Farfisa V
Solina V
SEM V
Jup-8 V
ARP 2600 V
VOX Continental V
Wurli V
Modular V

Platform specifications

Windows

Win 10+ (64bit)
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost)
32GB free hard disk space
OpenGL 2.0 compatible GPU
ARM processors not supported on Windows

Required configuration

Works in Standalone, VST, AAX, Audio Unit, NKS* (64-bit DAWs only).

Apple

Mac OS 11.0+
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost) or Apple Silicon CPU
32GB free hard disk space
OpenGL 2.0 compatible GPU

Work with ASC

An elegant and simple solution to help you install, activate, and update your Arturia software instruments.

Notes: Ever loved something so much you wanted to "bee-come" it? While Beetronics' circuits are primarily original, their bees had classic favourites they "Wannabee-d," so Beetronics embraced these buzzing wonders as their own hive of inspiration, infusing a generous dose of honeyed innovation to craft the ultimate dual overdrive.

The WANNABEE "BEELATERAL BUZZ" is a dual-drive pedal like no other. It combines two classic circuits, each offering three distinct FLAVORS, and lets users weave them together however they like. They can run them side by side or have one flow into the other, unlocking a world of tonal possibilities, as sweet as a jar of honey.

Circuit #0, Beetronics's Bluesbreaker-inspired creation, harmonizes vintage amp tones with crystal-clear crispness, all while preserving that beloved tube-like warmth. Plus, its three flavours give users control over the low-end oomph. Circuit #1 is Beetronics's take on the legendary Klon. All those iconic transparent overdrive tones are here, with a sweet honey twist. Unlike any other Klon, Beetronics' Circuit #1 offers a unique trio of flavours that grant users control over their clean blend level.

This pedal's core houses a truly exceptional Routing System, crafted by Beetronics' expert bees. It's the gateway to exploring unique tones. What makes it stand out is that it lets users not only choose the order of the circuits but also blend them in parallel, something other dual-drive pedals can't do.

In the centre position, users can use the volume controls to mix both circuits in parallel. And with the footswitch, they're in charge of when each circuit kicks in. Flick it to the right, and Circuit #0 flows into Circuit #1; shift left, and Circuit #1 flows into Circuit #0. When chaining one circuit into another, users can simply crank up the volume on the first to push the second into a thrilling buzz of distortion.

The WANNABEE draws inspiration from Beetronics' favourite overdrive circuits and then elevates them to a whole new level, enhancing their tone with a touch of honey and introducing innovative features. It unlocks a world of possibilities by blending both circuits in the most unique ways. Beetronics hopes this can be the ultimate overdrive tool to help users truly BEE THEMSELVES.

Product specs

Pedal Dimensions 5.5" x 4" x 2.5" (including knobs, switches and etc)
Pedal Weight - 1.1 lbs / 0.5 kg
Package Size - 6" x 5.25" x 3"
Requires 9VDC power supply (Centre Negative)
*Does not include power supply

Notes: Really clever stuff here. The Octaves VCO takes an additive approach, layering harmonics on top of a fundamental frequency to create complex tones. Control the six bands via CV to adjust the harmonic content.

Supplier's Notes:
A harsh and funky take of an additive Oscillator.

Pile up multiplications of your frequency to get a lo-fi-retro wall of squared sound!

You get six doubled frequency pulses, or octaves, with common PWM and volume control for each of them.

The output of each is cascaded to the next one, so you can either have one output with all frequencies or break the chain and get several sums and modulate each independently!

Features
Six bands, multiple of the base frequency.
Square wave oscillator with Octaves selector PWM control and sync.
Range control for Tune pot.
Volume CV control and individual output for each band
Cascaded summing outputs.

Specifications
Current needs: +12V: 110mA, -12V: 84mA
Width: 12 HP
Depth: 22mm (assembled and DIY), including power connector
Aluminium, heat-treated front panel
Designed, kits prepared and completed modules assembled in Barcelona

Notes: Nine zip cable ties in 3 different colours. Light Grey, Dark Grey, and Red. Each pack contains 3 cable ties of each colour.

Notes: Studio headphones for recording and monitoring purpose (closed).

Limited special edition circumaural studio headphones
For a range of devices thanks to a flexible STELLAR.45 driver
Includes detachable cable with mini XLR connector
Extremely comfortable, even after hours of use
Made in Germany

The next chapter of a studio legend

For 100 years, Beyerdynamic have been driven by the pursuit of the best sound. Thanks to numerous innovations such as the first dynamic stereo headphones DT 48, the robust studio legend DT 100, and the globally renowned DT 770 PRO, Beyerdynamic are now considered to be a reference for professional studio headphones.

To celebrate their 100-year company anniversary, Beyerdynamic are releasing the DT 770 PRO X Limited Edition, a time-limited special edition of studio headphones. They combine the reference-setting features of the DT 770 PRO with the flexibility of the dynamic STELLAR.45 driver system and a detachable cable. Made in Germany, the DT 770 PRO X Limited Edition opens a new chapter in the successful Beyerdynamic DT series.

A tried-and-tested acoustic signature

The DT 770 PRO X Limited Edition circumaural studio headphones feature the tried-and-tested acoustic signature of the DT 770 PRO. Powerful basses, detailed trebles and first-class impulse behaviour - professional musicians, producers, studio operators and sound engineers have been trusting in these qualities for decades. Flexible and powerful, the studio headphones are perfect for recording and monitoring purposes thanks to their closed-back design.

The reference for a range of playback equipment

Thanks to their dynamic STELLAR.45 driver (48 ohms) with its broad frequency response of 5-40,000 Hz, the DT 770 PRO X Limited Edition headphones deliver studio reference sound on a wide range of playback equipment.

Stellar.45

For this, the sound transducer uses a neodymium magnet and a voice coil made from copper-plated precision wires. The resulting high conductivity of the driver system at low weight is the reason for its high performance. The driver system keeps distortion extremely low, even at high sound pressures. The Stellar.45 has an impedance of 48 ohms and proves that low-impedance sound transducers can deliver excellent studio-quality sound.

You want it, you get it- a detachable cable

As requested by a number of users, the DT 770 PRO X Limited Edition headphones now offer even more flexibility thanks to their detachable cable. The headphones come with a 3m-long straight cable with lockable 3-pin mini XLR connector. This can be connected to a variety of devices thanks to a 3.5mm stereo jack including a screwable 6.3mm adaptor.

The most comfortable 770 of all time

For decades, the studio headphones in the DT range have not only been classified as a sound reference, but also a benchmark in comfort. In addition to the robust spring steel headband construction, it is the iconic velour ear pads that ensure the headphones are comfortable even for long studio sessions. The soft memory foam used in the headband means it ergonomically adjusts to the shape of the head. One new feature is the integrated fontanel recess. Both the headband and the ear pads can be replaced if necessary.

Professional headphones- made in Germany

Made in Germany, the DT 770 PRO X Limited Edition headphones are characterised by the high production quality that Beyerdynamic has stood for over many decades. The driver system is manufactured within extremely tight tolerances and measured several times during the various production steps.

The combination of robust metal parts and impact- and scratch-resistant ABS plastic make the DT 770 PRO X Limited Edition a long-lasting companion for everyday studio use.

For sustainability reasons, almost every part of the studio headphones can be replaced.

Applications
The DT 770 PRO X Limited Edition is a closed studio headphone suitable for professional recording and monitoring in the studio as well as on the move.

Due to the low-impedance STELLAR.45 driver, the DT 770 PRO X Limited Edition delivers studio reference sound on a wide range of end devices.

The detachable, single-sided mini XLR cable makes it easier to handle the DT 770 PRO X Limited Edition when it has to be used frequently.

The rugged headband made of spring steel gives the DT 770 PRO X Limited Edition a secure fit and the mechanical reliability needed for daily use.

Soft ear and headband pads contribute to a high long term comfort when wearing. If necessary, headband and ear pads can be replaced.

The connection cable is provided with a gold-plated mini stereo jack plug (3.5 mm) with a 1/4" adapter (6.35 mm) and can be connected to all common headphone outputs.

Technical specifications

Transducer type: Dynamic
Operating principle: Closed
Wearing type: Over-ear
Frequency response: 5 - 40,000 Hz
Nominal impedance: 48 O
Sound pressure level @ 1 mW/500 Hz: 98 dB
Sound pressure level @ 1 V/500 Hz: 112 dB
T.H.D. @ 500 Hz: < 0.05
Maximum short-term power handling capacity: 210 mW
Ambient noise isolation: 16 dBA
Nominal headband pressure: 5.5 N
Weight (without cable): 305 g
Length and type of cable: 3 m / straight cable, detachable, single-sided
Connection: Gold-plated mini stereo jack plug (3.5 mm) & 1/4" adapter (6.35 mm)


Supplied accessories

1 x Straight cable, 3-pin mini XLR (lockable) and mini stereo jack (3.5 mm), length 3 m
1 x Screw-on adapter 3.5 mm to 1/4" (6.35 mm) stereo jack
1 x Drawstring bag

Notes: Unbelievable "talking" wah effects!

The BOSS AW-3 Dynamic Wah pedal gives guitarists a wide range of classic auto-wah and dynamic wah effects, plus a new "Humanizer" effect which can simulate human vowel sounds. A Bass input provides a variety of funky wah sounds for bass guitar.

A "Talking" Pedal

The AW-3 Dynamic Wah is the first compact wah pedal to incorporate human voice-type sounds through a new "Humanizer" Mode. Of course, you can also choose from standard up-and-down wah effects, plus a Tempo Mode and resonant synth-like Sharp Mode.

Endless Possibilities

Choose from both fixed and auto wah settings using the Manual control or pedal for tempo input. By connecting an optional expression pedal, the AW-3 can also be used for Pedal Wah effects. A dedicated Bass input permits direct processing of bass guitars.

Specifications:

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass

Controls:
MODE knob
SENS knob
MANUAL knob
DECAY knob
Pedal switch

Indicator: CHECK indicator (Used for indication of check battery)

Connectors:
GUITAR IN jack: 1/4-inch phone type
BASS IN jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
EXP/CTL jack: 1/4-inch phone type
DC IN jack

Power Supply:
Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)

Current Draw: 50 mA

Expected battery life under continuous use:
Alkaline: Approx. 8 hours
*These figures will vary depending on the actual conditions of use.

Accessories:
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Alkaline battery (9 V, 6LR61)
Options (sold separately):
AC adaptor: PSA series
Expression Pedal: EV-30/FV-500H/FV-500L, Roland EV-5
Footswitch(momentary-type): FS-5U/FS-6/FS-7

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 430 g / 1 lb

Notes: Improves your overall tone

The CS-3 Compression Sustainer pedal compresses louder signals while boosting lower signals, providing smooth sustain without degrading the original sound quality. This is the perfect pedal for guitarists and bassists who want to sound their best.

Specifications

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls: SUSTAIN knob, ATTACK knob, TONE knob, LEVEL knob, Pedal switch
Indicator: CHECK indicator (Serves also as battery check indicator)
Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, DC IN jack
Power Supply: Carbon-zinc battery (9V, 6F22) or Alkaline battery (9V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 20 mA

Expected battery life under continuous use: Carbon: Approx. 10.5 hours, Alkaline: Approx. 26 hours
*These figures will vary depending on the actual conditions of use.
Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery/9 V type (6F22)
Options (sold separately) AC adaptor: PSA series
Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: 380 g / 14 oz

Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The DD-200 Digital Delay brings together sounds and features inherited from the flagship DD-500 into an even smaller footprint. Twelve different modes offer an inspiring variety of delay colours from modern digital to classic analogue, letting you dial up everything from basic echoes to rich ambient pads and everything in-between. There's also a looper that's always ready to use, plus a selectable carryover function for seamless transitions between memories.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current DD-200 system software

Twelve Modes, Unlimited Sounds

With 12 different modes to choose from, the DD-200 provides nearly any flavour of delay in an amazingly compact size. At your command are super-clean digital delays, gritty analogue echoes, and spot-on retro sounds from the Roland RE-201 Space Echo and Binson Echorec 2. There's also a variety of options for creating reverse effects, lo-fi tones, and pulsing rhythmic sounds with layered delays. And with the Tera Echo, Shimmer, and Pad Echo modes, immersive ambient colours are just a knob twist away.

Dial in Sounds Fast

The DD-200 features a no-nonsense interface, making it easy to craft inspiring sounds in the heat of the moment. Essential delay parameters are provided on dedicated controls for direct, hands-on access. And in each mode, the function of the PARAM knob changes to parameters tailored for the selected type, delivering extended control with no need to menu dive.

Save and Recall Your Favourite Setups

The DD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall. If you crave deeper control, setups can be directly recalled via program change messages from an external MIDI device. And by enabling the carryover function, delay repeats will keep sounding as you change memories for smooth, free-flowing transitions.

Deep Real-Time Control

By default, the DD-200's multi-function footswitches provide access to basic functions like bypass, memory scrolling, tap tempo, and looper control. But you can easily reassign them to hold, warp, and many other functions. External control is also possible via footswitches or an expression pedal, and MIDI I/O is even provided on space-saving mini TRS jacks. Via MIDI, you're able to chain multiple 200 series pedals and select memories on all of them at once, and also control a wide range of functions from MIDI devices like the ES-8 and ES-5 effects switchers.

Ready-to-Go Looper

Any time you're ready, pressing the DD-200's two footswitches together puts you into looper mode. Up to 60 seconds of mono recording time is available, and operation is simple and direct with the onboard switches. And since the looper engine functions independently, you're able to develop expressive loops with any of the DD-200's rich delay sounds.

DD-200 Delay Modes

Standard-Clear digital delay. PARAM adjusts the delay attack.
Analog-Emulates classic analogue "BBD" delays like the BOSS DM series. PARAM controls character and distortion amount.
Tape-Emulates the warm tape-based sound of the legendary Roland RE-201 Space Echo. PARAM selects different combinations of three playback heads, and also adjusts the amount of distortion in the delay sound.
Drum-Models the drum-based Binson Echorec 2. PARAM selects different combinations of four playback heads, and also adjusts the amount of distortion in the delay sound.
Shimmer-Pitch-shifted delay for lush, heavenly textures. PARAM adjusts the delay brightness.
Tera Echo-Spacious, animated ambience effect derived from the BOSS TE-2 pedal. PARAM adjusts the sound character.
Pad Echo-Newly developed delay sound for creating drifting ambient textures. PARAM adjusts the delay attack.
Pattern-Rhythmic sounds with 16 delay lines layered together. PARAM selects different pattern variations.
Lo-Fi-Delay sound with fat, distorted character. PARAM adjusts the distortion effect.
Dual-Two different delay lines connected in series. PARAM adjusts the time of the second delay.
Reverse-Backwards delay for cool psychedelic effects and other unique tones. PARAM adjusts the delay attack.
Ducking-Delay with a built-in ducking effect. PARAM adjusts the input sensitivity.

*The product names mentioned on this page are registered trademarks or trademarks of their respective owners. These names are used because it is the most practical way of describing the sounds that are simulated.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point

Modes: 12 modes
STANDARD, ANALOG, TAPE, DRUM, SHIMMER, TERA ECHO, PAD ECHO, PATTERN, LO-FI, DUAL, DUCKING, REVERSE

Memory127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohm
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohms
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass

Controls:
ON/OFF switch, MEMORY/TAP switch
MODE knob, TIME knob, FEEDBACK knob, E. LEVEL Knob, PARAM knob, TONE knob, MOD DEPTH knob
TAP DIVISION button, MEMORY button

Display: 7 segments, 3 characters (LED)
Indicator: TAP DIVISION indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 225 mA

Expected Battery Life Under Continuous Use
Alkaline: Approx. 4 Hours
* These figures will vary depending on the actual conditions of use.

Accessories: Leaflet "USING THE UNIT SAFELY", Leaflet "To obtain the Owner's Manual", Alkaline battery (AA, LR6) x 3, Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height (including rubber foot): 65 mm / 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery): 680 g / 1 lb 8 oz

0 dBu = 0.775 Vrms

Notes: Introducing the DD-8, the most wide-ranging and feature-rich BOSS compact series delay ever. This loaded pedal delivers more of everything-more great sounds, more delay time, more control options, and more connectivity. And it does it all in a standard BOSS pedal that slides easily into any mono or stereo setup. Eleven modes provide delay colours from basic to exotic, plus a looper with unlimited overdub capability and external control support. For maximum versatility in a minimum amount of space, there's no better delay stomp than the DD-8.

Equipped with a diverse selection of delays, the DD-8 packs impressive sonic range into one small pedal. Clean digital delays, vintage analogue and tape types, and modulation echo are available, plus specialty delays like shimmer and reverse. There's a new Warm type for softer echo tones, and a +RV type that blends delay and reverb together. Warp is perfect for dynamic ambient textures, while the new GLT type is great for glitchy rhythmic effects.

Everything sounds bigger and better in stereo, and the DD-8 delivers with full stereo I/O support and your choice of three output modes. The default independent mode provides linked parallel delays on the left and right channels, allowing you to maintain the true balance of stereo input sources in the effect sound. There's also a panning mode for ping-pong delay effects, and a wide stereo mode for enhanced spatial depth.

The DD-8's extensive real-time delay options help bring your music to life. You can tap in tempos with the onboard pedal switch, and control the Warp and GLT modes for unique expressive effects. Adding one or two footswitches unlocks more creative possibilities, like on-demand tap tempo, extended looper control, and a cool Twist effect for soaring echo sounds. Alternately, an expression pedal can be used for continuous control of level, feedback, or delay time-or all of them at once.

Having a looper on your pedalboard is a handy thing-it's great for practice, checking sounds at gigs, and creating on-the-fly backing while performing. The DD-8's looper mode has you covered, so you don't have to take up precious space with a dedicated pedal. All looper functions can be controlled with the onboard switch, providing all-in-one operation. But if you prefer to work with extended controls, just connect one or two footswitches to operate the looper's stop and clear functions externally.

The DD-8's inputs and outputs have smart functionality, allowing you to set the pedal for any application simply by connecting cables in different ways. A variety of mono and stereo connections are supported, including discrete dry and effect outputs for wet/dry setups. It's even possible to defeat the dry signal entirely, perfect for delay-only blending in a parallel effects loop.

Analog-Classic analogue BBD delay sound.
Standard-Clear digital delay.
Tape-Vintage tape-based delay sound.
Warm-Digital delay with a softer sound.
Reverse-Backwards delay for cool psychedelic effects and other unique tones.
+RV-Digital delay with reverb added.
Shimmer-Pitch-shifted delay for lush, shimmering textures.
Mod-Digital delay with modulation added on the repeats.
Warp-Unique delay with expressive pedal control. Holding the pedal switch increases feedback and level, allowing you to create ambient swell effects.
GLT-Newly developed delay mode that creates glitchy machine-gun effects when the pedal switch is pressed. Adjust the Feedback and Time knobs for a wide variety of sounds.
Loop-Loop recorder with overdub capability and up to 40 seconds of recording time with mono input (20 seconds with stereo input).

Specifications

Nominal Input Level: -20 dBu
Input Impedance1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls: MODE knob, TIME knob, FEEDBACK knob, E.LEVEL(Effect Level) knob, CARRYOVER switch
Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)

Connectors: INPUT-A(MONO)/INPUT-B jack: 1/4-inch phone type
OUTPUT-A(MONO)/OUTPUT-B jack: 1/4-inch phone type
TEMPO/EXP jack: TRS 1/4-inch phone type
DC IN jack

Power Supply:
Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)

Current Draw: 100 mA

Expected battery life under continuous use
Alkaline: Approx. 3.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (9 V, 6LR61)
Options (sold separately)
AC adaptor: PSA series
Footswitch: FS-5U, FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5

Size & weight
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 440 g / 1 lb

Notes: High-end amps and effects from vintage to modern with advanced flexibility

With the new GT-100 Version 2.0 update, BOSS' high-end multi-effects processor is now even more powerful than before, adding a host of great new features to its already formidable arsenal. Two new amp types are included, along with cutting-edge MDP effects, an acoustic guitar simulator, and an improved rotary effect. A convenient Guitar-to-MIDI function is on board as well, letting you connect to a computer to play soft synths and input MIDI note using your normal guitar. The GT-100's USB audio capabilities have been expanded too, providing greater flexibility for re-amping applications. And with the BOSS TONE STUDIO software, you can now edit GT-100 patches from a friendly graphical interface on your computer.

Advanced COSM Amps: Beyond Vintage

With its next-generation COSM processor, the GT-100 ushers in a new era of expression and sonic capabilities. Recreating the meticulous details of vintage amps and how they behave, the GT-100 excels in not only cloning classic amps, but in creating a new world of unimagined tones as well. The Amp Customize function lets you mutate classic amps beyond reality to construct completely new, unimagined sounds!

Simple and Intuitive User Interface

The GT-100's unique dual-LCD and eight-knob user interface provides fast access and intuitive control. There are no menus to navigate; every function is instantly available. The tone-customizing functionality has been improved as well-all patches, amps, and overdrives/distortions can be created from scratch and/or customized with the friendly graphical Tone Grid.

New Tonal Possibilities with the Accel Pedal

A new dimension of expression is available with the Accel pedal, which enables control of multiple parameters simultaneously, as well as time-variant effects such as Feedbacker, S-Bend, Twist, and more. Experiment with creative combinations of parameters and bring dynamic new sounds to your performances by interacting in real time with this cool pedal.

A/B Channel Divider Function

Another notable feature in the GT-100 is the versatile A/B Channel Divider. This lets you assign different amps and effects to each channel, either for blending together or switching between them with a footswitch. Going even further, you also have the ability to switch channels by playing strength or frequency range. With each channel capable of driving its own effects and amps settings, the range of tones gets wider and wilder! You can assign smooth, mild lead tones to the mid-to-high pitches, for example, and heavy, cutting tones to the lower notes-the tonal possibilities are endless.

Edit and Organize Sounds with BOSS TONE STUDIO

Available as a free download for Mac or Windows, BOSS TONE STUDIO gives you an intuitive graphical interface for creating and editing GT-100* effects patches from your computer via USB. The software also makes it easy to organize and archive patches, and to load them as needed for different gigs and recording sessions. If your computer has Internet access, BOSS TONE STUDIO provides an integrated connection to the BOSS TONE CENTRAL website, where you can preview and download free gig-ready patches created by top guitar pros directly into the GT-100.

*GT-100 Version 2.0 software is required for compatibility with BOSS TONE STUDIO.

BOSS TONE CENTRAL: Your Web Home for Free Patches, Instructional Vids, Artist Tips, and More

BOSS TONE CENTRAL is the ultimate destination for all players that use BOSS products. Evolving to include a growing selection of BOSS gear, this site gives you access to lots of premium content, including demo videos and free patches created by famous guitarists, touring pros, and session players.

Specs

AD Conversion: 24 bits + AF method

*AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (S/N) ratio of the A/D and D/A converters.
DA Conversion: 24 bits
Sampling Rate: 44.1 kHz
Program Memories: 400: 200 (User) + 200 (Preset)

Effect Type:

COMP, PREAMP(*1), OD/DS(*2), EQ, FX1/FX2(*3), DELAY, CHORUS, REVERB, PEDAL FX, NS1/NS2, ACCEL FX

*1 PREAMP
NATURAL CLEAN, FULL RANGE, COMBO CRUNCH, STACK CRUNCH, HiGAIN STACK, POWER DRIVE, EXTREME LEAD, CORE METAL, JC-120, CLEAN TWIN, PRO CRUNCH, TWEED, DELUXE CRUNCH, VO DRIVE, VO LEAD, MATCH DRIVE, BG LEAD, BG DRIVE, MS1959 I, MS1959 I+II, R-FIER VINTAGE, R-FIER MODERN, T-AMP LEAD, SLDN, 5150 DRIVE, BGNR UB METAL*, ORNG ROCK REVERB*, CUSTOM

*2 OD/DS

MID BOOST, CLEAN BOOST, TREBLE BOOST, CRUNCH, NATURAL OD, WARM OD, FAT DS, LEAD DS, METAL DS, OCT FUZZ, A-DIST*, BLUES OD, OD-1, T-SCREAM, TURBO OD, DIST, RAT, GUV DS, DST+, METAL ZONE, '60S FUZZ, MUFF FACE, CUSTOM

*3 FX1/FX2

T.WAH, AUTO WAH, SUB WAH, ADV. COMP, LIMITER, SUB OD/DS, GRAPHIC EQ, PARA EQ, TONE MODIFY, GUITAR SIM., AC.GUITAR SIM*, SLOW GEAR, DEFRETTER, WAVE SYNTH, SITAR SIM., OCTAVE, PITCH SHIFTER, HARMONIST, OVERTONE*, SOUND HOLD, AC. PROCESSOR, PHASER, FLANGER, TREMOLO, ROTARY1, ROTARY2*, UNI-V, PAN, SLICER, VIBRATO, RING MOD., HUMANIZER, 2X2 CHORUS, SUB DELAY, TERA ECHO*

*Newly Added Features (Version 2.0)
A-DIST is available in OD/DS and in SUB OD/DS of FX2.
OVERTONE and TERA ECHO are only available in FX2.

Nominal Input Level
INPUT: -10 dBu
RETURN: -10 dBu
AUX IN: -20 dBu

Input Impedance
INPUT: 1 M ohm
RETURN: 100 k ohms
AUX IN: 47 k ohms

Nominal Output Level
OUTPUT: -10 dBu/+4 dBu
SEND: -10 dBu

Output Impedance
OUTPUT: 2 k ohms
SEND: 2 k ohms

Dynamic Range: 100 dB or greater (IHF-A)
Displays: Graphic LCD (132 x 64 dots, backlit LCD) x 2

Connectors
INPUT jack (1/4-inch phone type)
AUX IN jack (Stereo miniature phone type)
OUTPUT L/MONO, R jacks (1/4-inch phone type)
PHONES jack (Stereo 1/4-inch phone type)
EXT LOOP jacks (SEND, RETURN; 1/4-inch phone type)
AMP CONTROL jack (1/4-inch phone type)
SUB CTL1, 2/SUB EXP jack (1/4-inch TRS phone type)
USB port
MIDI connectors (IN, OUT)
DC IN jack

Power Supply: DC 9 V
Current Draw: 600 mA

Accessories:
AC adaptor(PSB-1U + AC Cord Set)
USB Cap
Owner's Manual

Options (sold separately)

Footswitch: FS-5U
Dual Footswitch: FS-6, FS-7
Expression Pedal: FV-500L/500H, EV-30, Roland EV-5
AC adaptor (PSB-1U)

*When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be used, and the voltage supplied there.
(PSB-120/PSB-120TW/PSB-230EU/PSB-230UK/PSB-240A)

Size & weight

Width: 542 mm / 21-3/8 inches
Depth: 271 mm / 10-11/16 inches
Height: 80 mm / 3-3/16 inches
Weight: 4.8 kg / 10 lbs. 10 oz.

Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

Outfitted with algorithms from the flagship MD-500, the MD-200 Modulation delivers an array of world-class effects in one small, convenient pedal. Twelve different modes provide every mod sound you need and more, and each includes customized controls that unlock deep tone shaping right from the panel. And with the powerful insert function, it's simple to patch in drive pedals and other effects for selectable pre or post processing.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current MD-200 system software.

Twelve Mod Essentials in One Pedal

Compact and mighty, the MD-200 gives you every key mod effect in a minimal footprint. Modern and vintage BOSS chorus effects are included, plus phaser, flanger, rotary, vibrato, and tremolo. Classic vibe and '70s phaser effects are also available, complete with selectable distortion for added versatility. BOSS's famous Slicer delivers lots of cool rhythmic grooves, while the rich Overtone effect dishes up fat octave tones and unique sonic colours. There's a highly adjustable auto wah as well, which can double as a foot wah when an expression pedal is connected.

Dial in Sounds Fast

With the MD-200's simple and direct interface, it's easy to craft inspiring sounds in the heat of the moment. Using dedicated controls, you can quickly dial in rate, depth, and level for any selected mode. You can also tap in the rate with a footswitch while playing, and visually set note subdivisions right from the panel. Going further, three additional parameter knobs dynamically change functions with each mode, providing extended tone shaping with no need to menu dive.

Save and Recall Your Favourite Setups

The MD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall. And if you crave deeper control, setups can be directly recalled via program change messages from an external MIDI device.

Instantly Change Effect Order for Optimum Tone

Using the MD-200's insert loop function, you're able to patch external pedals, set the ideal effect order, and save the setting to an onboard memory. For example, you can place a phaser or classic vibe before an external pedal in one memory, a chorus or flanger after in the next, and then switch between them. This is particularly useful with drive pedals, where the signal order can have a dramatic effect on the selected mod sound.

Deep Real-Time Control

By default, the MD-200's multi-function footswitches control bypass, memory scrolling, and tap tempo, but you can easily reassign them to alternate functions as needed. External control is also possible via footswitches or an expression pedal, and MIDI I/O is even provided on space-saving mini TRS jacks. Via MIDI, you're able to chain multiple 200 series pedals and select memories on all of them at once, and also control various functions from MIDI devices like the ES-8 and ES-5 effects.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Modes:12 modes; CHORUS, CE-1 CHORUS, FLANGER, PHASER, VINTAGE PHASER, CLASSIC VIBE, VIBRATO, TREMOLO, ROTARY, AUTO WAH, SLICER, OVERTONE
Memory: 127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohm
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohms
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass
Controls: ON/OFF switch, MEMORY/TAP switch, MODE knob, RATE knob, DEPTH knob, E. LEVEL knob, PARAM 1 knob, PARAM 2 knob, PARAM 3 knob, TAP DIVISION button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: TAP DIVISION indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack

USB port: USB micro B-type (program update only)
Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 225 mA
Expected Battery Life Under Continuous Use: Alkaline: Approx. 4 Hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet "USING THE UNIT SAFELY", Leaflet "To obtain the Owner's Manual", Alkaline battery (AA, LR6) x 3, Rubber foot x 4

Options (sold separately)
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight
Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height (including rubber foot)65 mm 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery)680 g / 1 lb 8 oz

0 dBu = 0.775 Vrms

Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analogue/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There's even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current OD-200 system software

Premium Drive Tones with BOSS's Advanced Hybrid Design

The OD-200's next-generation hybrid design seamlessly brings analogue and digital clipping circuits together for the best of all worlds, putting a universe of expressive drive colours under your fingers. Twelve modes offer a variety of premium overdrive, fuzz, and distortion sounds, including a high-gain Brown mode derived from the acclaimed Katana amplifier series. And with the three high-performance "X" drive modes powered by BOSS's cutting-edge MDP tech, you'll experience enhanced definition, clarity, and dynamic response that's perfect for modern playing styles.

Powerful Gain Shaping with Series and Parallel Boosts

While each of the OD-200's 12 main drive modes sound fantastic on their own, you're able to craft tones even further with 15 switchable boost circuits. Placing the boost in series lets you create traditional stacked drive voices, complete with post-gain level to balance with the bypassed sound or kick up the volume for solos. The boost circuit can also be used in parallel with the main mode, enabling side-by-side blending for an unlimited range of unique drive textures.

Kill the Noise and Tighten Your Tone

With its integrated gate circuit, the OD-200 always keeps your signal clear and quiet when you're not playing. The default setting is a great starting point, providing gentle, transparent gating that works well for general playing styles. The decay and threshold controls can also be adjusted for super-fast gate performance when needed, perfect for bringing tightness to heavy modern styles that combine full-throttle gain with precision staccato riffing.

Dial in Sounds Fast

The OD-200 offers a ton of advanced capabilities, but remains as simple to use as any regular distortion stomp. With dedicated controls, you can quickly dial in the gain and overall level for any selected mode, then sculpt the tone with wide-ranging low, mid, and high EQ. There's also a multi-function parameter knob, which changes operation based on the group selected with the panel's parameter switch and LED status indicators.

Save and Recall Your Favourite Setups

The OD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Drive Circuit: Analogue + Digital

Modes:
12 modes
OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ

Memory: 127 + Manual
Nominal Input Level: INPUT: -10 dBu
Maximum Input Level: INPUT: +7 dBu
Input Impedance: INPUT: 1 M ohm
Nominal Output Level: OUTPUT: -10 dBu
Maximum Output Level: OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
Output Impedance: OUTPUT: 1 k ohms
Recommended Load Impedance: OUTPUT: 10 k ohms or greater
Bypass: Buffered bypass

Controls: ON/OFF switch, MEMORY/BOOST switch
MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
PARAM button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: PARAM indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT jack, OUTPUT jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 220 mA

Expected Battery Life Under Continuous Use:
Alkaline: Approx. 6 Hours
* These figures will vary depending on the actual conditions of use.

Accessories:

Leaflet "USING THE UNIT SAFELY"
Leaflet "To obtain the Owner's Manual"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight:

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height: (including rubber foot)65 mm / 2-9/16 inches
Weight: 600 g / 1 lb 6 oz
Weight (including battery): 670 g / 1 lb 8 oz

Notes: Modern phasing with tap tempo sync

The BOSS PH-3 Phase Shifter pedal provides a wealth of vintage and modern phasing effects, including new "Rise" and "Fall" modes for unique, unidirectional phasing. Syncing these phasing effects is as simple as tapping the pedal to the desired tempo, while an optional expression pedal provides realtime control of the PH-3's Rate, Filter and Tempo.

"Rise" and "Fall" Effects

In addition to standard up and down cycles, the new PH-3 Infinite Phaser can produce entirely upward or downward moving sounds through its new Rise and Fall effects. There's also 4-, 8-, 10-, and 12-stage phasers, plus a Step effect.

Total Control

Syncing the PH-3's phasing effects can be achieved by simply tapping the pedal to the tempo desired. Or, for maximum control, connect an optional expression pedal to control both rate and filter in real time as you play.

Specifications

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output: Level-20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass

Controls:
STAGE switch
RES(Resonance) knob
DEPTH knob
RATE knob
Pedal switch

Indicator: CHECK indicator (Used for indication of check battery)

Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
EXP/CTL jack: 1/4-inch stereo phone type
DC IN jack

Power Supply:
Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)

Current Draw: 50 mA
Expected battery life under continuous use: Alkaline: Approx. 6 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Alkaline battery (9 V, 6LR61)

Options (sold separately):
AC adaptor: PSA series
Expression pedal: EV-30/FV-500L/FV-500H, Roland EV-5
Footswitch(momentary-type): FS-5U/FS-6/FS-7

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 415 g / 15 oz

0 dBu = 0.775 Vrms

Notes: The BOSS RC-1 is Boss' simplest and most user-friendly Loop Station ever, and it's a ton of fun! Since the RC-20 Loop Station was first released in 2001, BOSS has led the way by continually releasing new looping products. Though they've been used and enjoyed by various looping artists and performers, BOSS still pursued an easier and more affordable solution. The RC-1 is a straightforward looper that is easy to operate. Experience the fun of looping when you record, playback, overdub, and undo or redo loops using this compact BOSS stompbox. And of course, the RC-1 retains the BOSS quality and performance that musicians around the world have come to expect and rely on.

On the top panel, there is a new and innovative loop indicator, which consists of a 24-segment LED laid out in a circular pattern. You can quickly and easily determine the current status of the Rec/Overdub/Play modes. With a maximum 12 minutes of stereo recording time, the RC-1 is capable of capturing any extended performance that you can create or imagine! The stereo in/out jacks can be used with stereo effects and amplifiers. Additionally, they allow you to connect stereo instruments, such as synthesizers. Other convenient features include battery and AC power, as well as flexible external footswitching capabilities. The RC-1 is an especially great partner to start enjoying looping!

Specifications

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Maximum Recording Time: Approximately 12 minutes

Controls: Pedal switch, LEVEL knob
Indicators: CHECK indicator, LOOP indicator

Connectors:
INPUT A (MONO) jack: 1/4-inch phone type, INPUT B jack: 1/4-inch phone type, OUTPUT A (MONO) jack: 1/4-inch phone type, OUTPUT B jack: 1/4-inch phone type, STOP/UNDO jack: 1/4-inch TRS phone type, DC IN jack
Power Supply: Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 95 mA

Expected battery life under continuous use (These figures will vary depending on the actual conditions of use.)
Alkaline: Approx. 3 hours

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Alkaline battery (9 V, 6LR61)

Options (sold separately) AC adaptor: PSA series
Footswitch: FS-5U, FS-6, FS-7

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: 430 g / 1 lb

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Second-generation version of Boss's excellent looper gives you five stereo tracks, four simultaneous effects, hands-on control and full MIDI support. Ideal for live use but also a creative studio tool.

Supplier's Notes:
Looping Magic at Your Fingertips

Packed with inspiring tools for on-the-spot music creation, the RC-505mkII brings next-generation power and flexibility to the world's most popular tabletop looper. Elevate your performances with five stereo tracks and four simultaneous Input FX and Track FX, and soar even further with customizable buttons, expanded I/O, increased mixing control, and other enhancements requested by long-time RC-505 users. Built for free-flowing expression on stage and in the studio, the RC-505mkII is a dream machine for beatboxers, vocalists, multi-instrumentalists, and other fearless looping artists.

More to Love

The RC-505mkII retains everything that made the original so loved and adds a wealth of new features to make the looping experience even more creative and free flowing. The faders provide longer throw for finer adjustments, and they also have a more solid feel under the fingers. And each track now has dedicated FX and Track buttons, making it easier to colour and control your loops in the heat of the moment. Undo/redo has also been enhanced with a Mark Back function that lets you instantly jump back to a previous loop state while performing.

Customize Your Workflow

While the original RC-505 was very customizable, the RC-505mkII takes things to the next level with a vast range of user-configurable controls. You can assign various CTL parameters to the FX and Track buttons and trigger them with a press, hold, or double-click. Pressing the Undo/Redo button reveals a secondary layer, doubling your options. Two external control jacks are also available for connecting footswitches or expression pedals, and each has its own dedicated set of parameters. Crave even more? Then tap into the Assign screens to set up 16 different targets for hardware control and MIDI operation.

More Sonic Colours for Inspired Looping

Sonic variations help make loop performances more compelling, and the RC-505mkII provides a greatly expanded FX palette to colour your sounds during recording and playback. There are 49 Input FX and 53 Track FX types to choose from-including powerful new vocal harmony effects-and you can use up to four in each section at once. Going further, groups of four Input FX and Track FX can be stored in four banks for quick recall, along with toggle or momentary button settings for each type. A step sequence function is also available in some FX to automate parameter changes for dynamic real-time movement.

SPECIFICATIONS

Sampling Frequency: 44.1 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point

Recording/Playback
Number of Tracks: 5
Data Format: WAV (44.1 kHz, 32-bit float, stereo)
Maximum Recording Time: Approx. 1.5 hours (1 track), Approx.13 hours (total of All memories)

Rhythm Type: 200 types or greater
Rhythm Kit: 16 types

Effect:
INPUT FX: 49 types
TRACK FX: 53 types
MASTER FX: 2 types
Memory: 99
Nominal Input Level: MIC 1, 2 INPUT: -40 dBu/INST 1, 2 INPUT: -10 dBu
Maximum Input Level: MIC 1, 2 INPUT: 0 dBu/INST 1, 2 INPUT: +7 dBu/+20 dBu (selectable)
Input Impedance: MIC 1, 2 INPUT: 3k ohms/INST 1, 2 INPUT: 1 M ohms/25 k ohms (selectable)
Nominal Output Level: MAIN OUTPUT: -10 dBu/SUB 1, 2 OUTPUT: -10 dBu
Maximum Output Level: MAIN OUTPUT: +7 dBu/SUB 1, 2 OUTPUT: +7 dBu
Output Impedance: MAIN OUTPUT: 1 k ohm/SUB 1, 2 OUTPUT: 1 k ohm
Recommended Load Impedance: MAIN OUTPUT: 10 k ohms or greater/SUB 1, 2 OUTPUT: 10 k ohms or greater

Controls:
TRACK1--5 REC/PLAY button, TRACK1--5 STOP button, TRACK1--5 TRACK button, TRACK1--5 FX button, ALL START/STOP button, UNDO/REDO button, TAP TEMPO button, RHYTHM START/STOP button, RHYTHM EDIT button, INPUT FX A--D button, INPUT FX EDIT button, TRACK FX A--D button, TRACK FX EDIT button, MENU button, LOOP button, ENTER button, EXIT button, PAGE buttons, 1--4 knobs, OUTPUT LEVEL knob, TRACK1--5 LEVEL Faders

Display:
Graphic LCD (128 x 64 dots, backlit LCD)

Connectors:
MIC IN 1, 2 jack: XLR type (balanced, phantom power: DC 48 V, 10 mA Max
INST IN 1, 2 jacks, MAIN OUT jacks, SUB OUT 1, 2 jacks: 1/4-inch phone type
PHONES jack: Stereo 1/4-inch phone type
CTL1,2/EXP1 jack, CTL3,4/EXP2 jack: 1/4-inch TRS phone type
USB port: USB B type
MIDI (IN, OUT) connectors
DC IN jack

Power Supply: AC adaptor
Current Draw: 1.0 A (with phantom power), 0.9 A (without phantom power)
Accessories:

AC adaptor
Owner's Manual
Leaflet "USING THE UNIT SAFELY"

Options (sold separately):
Footswitch: FS-5U
Dual Footswitch: FS-6, FS-7
Expression Pedal: FV-500H, FV-500L, EV-30, Roland EV-5

SIZE AND WEIGHT

Width: 420 mm/16-9/16 inches
Depth: 234 mm/9-1/4 inches
Height: 67 mm/2-11/16 inches
Weight: 1.8 kg/4 lbs

Notes: Introduced in 1974 and produced for over 14 years, the Roland RE-201 Space Echo stands among the most legendary and sought-after effect units in music history. Known for its distinctive rhythmic echo sounds, warm character, and highly playable sonic quirks, this tape-based classic continues to inspire musicians, producers, and audio mixers over four decades on.

With the RE-2, the authentic sound and behaviour of the Space Echo is now available in the famous BOSS compact series for the first time. Backed by intensive R&D and our latest innovations, the RE-2 delivers the coveted magic of the RE-201 in a pedalboard-friendly footprint-realized in flawless detail by the company that designed the original.

When tape-based echoes were standard in the music world, the RE-201 was a leader in its class. Equipped with three evenly spaced tape heads and a spring reverb tank, it could produce everything from clean, single delays to dense, rhythmic echoes and ambient washes. The RE-201's appealing sound was influenced by many factors, from the warm compression of magnetic tape saturation to the evolving modulation produced by motor speed fluctuations, friction, and other elements. Last but not least, analogue preamp circuitry was a key ingredient in the Space Echo's rich sonic recipe.

In developing the RE-2 and its big brother, the RE-202, BOSS engineers have fully reproduced all the complex, non-linear behaviours that contribute to the RE-201's immortal character. We carefully analysed several vintage RE-201s, including a pristine original unit from the BOSS and Roland factory archive. Everything that influences the sound has been recreated with all-new algorithms, including the tape path, record/playback mechanism, motor variations, preamp coloration, spring reverb character, and more.

The RE-2 squeezes the complete sonic character of the RE-201 into the classic BOSS compact pedal format. The 11-position mode selector lets you dial in different virtual tape heads with or without spring reverb, and you can balance the echo/reverb blend with independent level knobs. Every behaviour is accurately replicated, such as the gradual pitch change that occurs with Repeat Rate tweaks and the runaway feedback that happens when maxing the Intensity knob. And with the expressive Wow & Flutter control, you can conjure all the natural modulation characteristics that are essential to the Space Echo sound.

The RE-2 takes the Space Echo experience further with versatile features for today's music. Delay time has been doubled and tap tempo control is supported, and there's a cool Twist function for creating evocative special effects as you perform. For the dry sound, you can choose between the warm and fat RE-201 preamp tone or a clean signal with zero processing. Full stereo I/O is available, and it's possible to mute the dry signal for parallel effect setups and studio use. The RE-2 also supports expanded control via external footswitches or an expression pedal, including continuous pedal control of multiple panel functions at once.

Specifications

Modes: 11 modes
Nominal Input Level: INPUT A(MONO), INPUT B: -20 dBu
Maximum Input Level: INPUT A(MONO), INPUT B: +7 dBu
Input Impedance: INPUT A(MONO), INPUT B: 1 M ohm
Nominal Output Level: OUTPUT A(MONO), OUTPUT B: -20 dBu
Maximum Output Level: OUTPUT A(MONO), OUTPUT B: +7 dBu
Output Impedance: OUTPUT A(MONO), OUTPUT B: 1 k ohm
Recommended Load Impedance: OUTPUT A(MONO), OUTPUT B: 10 k ohms or greater
Bypass: Buffered bypass

Controls: MODE knob, REPEAT RATE knob, WOW & FLUTTER knob, INTENSITY knob, TONE knob, ECHO knob, REVERB knob, CARRYOVER switch
Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)

Connectors: INPUT A(MONO) jack, INTPUT B jack, OUTPUT A(MONO) jack, OUTPUT B jack: 1/4-inch phone type
CTL/EXP jack: 1/4-inch TRS phone type
DC IN jack
Power Supply: Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
Current Draw: 75 mA

Expected battery life under continuous use: Alkaline: Approx. 4.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (9 V, 6LR61)
Options (sold separately)AC adaptor: PSA series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: (including battery)450 g / 1 lb

Notes: Part of the new Boss 200 series, the RV-200 is a seriously classy reverb. With a choice of 12 algorithms, things quickly move from classic ambience to the pitch-shifted arpeggiated madness of the new Arpverb program.

Supplier's Notes:
Ambient Bliss

The RV-200 delivers inspiring reverbs and premium sound in the streamlined BOSS 200 series design. Twelve versatile reverb types-including the newly developed Arpverb-provide everything from subtle spatial colour to complex, dreamy textures for ambient explorations. Quickly dial in sounds with the fast-access interface. Save favourites in 127 memories. And take performances to the next level with flexible onboard footswitches, deep external control support, and head-turning creative tools like Warp, Twist, and more.

Studio-Grade Processing

The RV-200 features a powerful reverberation engine with class-leading sound quality, backed by custom BOSS DSP, 32-bit AD/DA, 32-bit floating point processing, and a 96 kHz sampling rate. Every algorithm offers true studio-grade performance, with exceptional detail and definition from the shortest early reflections to long, floating tails spanning multiple seconds.

Twelve Distinctive Reverbs

From essentials like Room and Hall to deeply immersive reverbs like Shimmer, Slowverb, and the cool new Arpverb, the RV-200 gives you the ambient colours you need for every song and style.

Room

Simulates the reverberation characteristics of a small room. Select from four room sizes with the Param knob.

Hall

Simulates the reverberation characteristics of a concert hall. Select from three hall sizes with the Param knob.

Plate

Simulates the reverberation characteristics of a studio plate reverb. Balance the high and low damping of the reverb with the Param knob.

Spring

Simulates the distinctive sound of the hardware spring reverb effect found in guitar amplifiers. Select the number of springs with the Param knob.

Shimmer

Creates long, dreamlike reverberations rich in harmonic content. Adjust the harmonic character and diffusion with the Param knob.

Arpverb

A newly developed BOSS reverb that creates an arpeggio type of sound with evocative pitch-shifted tails. Use the Param knob to adjust the attack of the arpeggio sound.

Slowverb

A sweet ambient reverb with gentle attack and soft harmonics. Param adjusts the amount of direct sound blended with the reverb, allowing you to create deep, immersive tones.

Modulate

Adds a modulation effect to a rich hall reverb sound. Adjust the modulation depth with the Param knob.

+Delay

Combines a delay with reverb, with the length of both effects controlled with the Time knob. Use the Param knob to adjust the delay level.

Lo-Fi

A specialty reverb with limited bandwidth and added distortion. Adjust the distortion amount with the Param knob.

Gate

A distinctive reverb effect that abruptly cuts off the reverb tail. Use the Param knob to control the timing of the gate effect.

Reverse

Plays the reverb sound in reverse. Adjust the high-frequency character with the Param knob.

Instant Sound Creation

Like all 200 series pedals, the RV-200 offers a powerful yet intuitive panel that lets you realize great sounds with minimal effort. Along with core parameters such as reverb time, effect level, and pre-delay, there are variable high and low filters to perfectly balance the verb for your application. You also have a density control to adjust the weight of the sound, plus a parameter knob with access to multiple sound-shaping tools that are unique to each type.

Expressive Performance Control

The RV-200 includes memories for storing 127 reverb sounds, so your favourite setups are always ready to go. Two onboard footswitches pack a lot of performance versatility, with numerous options to reassign their targets to suit your needs. For example, you can bypass the effect, scroll through memories, and activate a Hold function to carry on the reverb effect for as long as the switch is pressed. It's also possible to assign powerful performance effects such as Warp, Twist, and Fade.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Modes: 12 modes- ROOM, HALL, PLATE, SPRING, SHIMMER, ARPVERB, SLOWVERB, MODULATE, +DELAY, LO-FI ,GATE, REVERSE
Memory127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohms
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohm
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass
Controls: ON/OFF switch, MEMORY/HOLD switch, MODE knob, TIME knob, PRE-DELAY knob, E. LEVEL knob, PARAM knob, LOW knob, HIGH knob, DENSITY button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: DENSITY indicator, MEMORY (MAN, 1--4) indicators

Connectors
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type, CTL 1, 2/EXP jack: 1/4-inch TRS phone type, MIDI (IN, OUT) jacks: Stereo miniature phone type, DC IN jack, USB port: USB2.0 micro B (program update only)
Power Supply: Alkaline battery (AA, LR6) x 3, AC adapter (sold separately)
Current Draw: 260 mA

Expected Battery Life Under Continuous Use: Alkaline: Approx. 4 Hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet "USING THE UNIT SAFELY", Leaflet "To obtain the Owner's Manual", Alkaline battery (AA, LR6) x 3, Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
TRS/MIDI connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height(including rubber feet): 65 mm / 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery): 680 g / 1 lb 8 oz

Notes: Infinite inspiration, ready to play

Combining high-end sound and wide-ranging versatility, the RV-6 takes pedal-based reverb to the next level. Reaching beyond the capabilities of previous generations, this powerful stomp employs the latest tech and legendary BOSS know-how to make it easy to get amazing reverb tones instantly. From subtle rooms to modern shimmer effects to long, evocative reverbs, the RV-6 envelops your tone in lush ambient spaces that endlessly inspire.

Simply Great-Sounding Reverbs

Packing the latest BOSS DSP and updated algorithms, the RV-6 gives you eight highly musical reverb effects in one compact pedal. Add body and depth to your core tone with standards like Room, Hall, and Plate, dial up swirling richness with the Modulate setting, or surf it up with a vintage-style Spring reverb. Dynamic mode automatically adjusts the effect depth to your playing touch, providing deep, immersive reverb that won't turn your tone to mud. And modern players will love the new Shimmer and Reverb + Delay modes.

Dialled-In Sounds at Your Command

The RV-6 makes getting high-quality reverb sounds with your guitar quick and easy- just select a sound mode, tweak the knobs to taste, and play. But while its operation is simple, the RV-6's sound is rich and sophisticated. Under the hood, each mode includes a huge array of detailed reverb parameters, all perfectly tuned for guitar by the BOSS engineers with direct input from many pro players and sound engineers. Even as you adjust the selected mode with the Time and Tone knobs, many parameters are simultaneously adjusted inside to create the ideal voicing for every setting.

Analogue Dry Tone and Versatile I/O

While the RV-6's reverb effects are high-tech digital, you can rest assured that your straight guitar tone always remains pure analogue as the effect is blended in. Convenient auto-switching jacks let you integrate with any pedal chain, with support for mono, mono-to-stereo, and stereo-to-stereo operation. And by plugging into the B input only, the RV-6 outputs a 100-percent wet sound, great for working with more complex rigs that employ parallel processing chains and mixers. There's also a jack for connecting an optional expression pedal, allowing you to control the effect level in real time as you play.

Reverb Modes

+DELAY - This is reverb combined with delay. The synergistic effect provides rich reverberation.
SHIMMER- This reverb is distinctive for its sparkling high-frequency range. It produces fantasy-like reverberation wrapped in spacious overtones.
DYNAMIC- This reverb automatically sets the depth of the effect according to your performance. It produces deep reverberation without blurring the overall shape of your playing.
ROOM- This reverb simulates the reverberation of a room. It produces warm reverberation.
HALL- This reverb simulates the reverberation of a hall. It produces clear and spacious reverberation.
PLATE- This simulates a plate reverb (a reverb unit that uses the vibration of a metal plate). It produces metallic-sounding reverberation with an extended high-frequency range.
SPRING- This simulates a spring reverb built into a guitar amp.
MODULATE- This reverb adds modulation to hall reverb, producing extremely good-feeling reverberation.

Specifications


Reverb Modes:

8 modes- HALL, PLATE, ROOM, SPRING, MODULATE, +DELAY, SHIMMER, DYNAMIC
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level-20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Controls: Pedal switch, E.LEVEL knob, TONE knob, TIME knob, MODE knob
Indicator: CHECK indicator (Serves also as battery check indicator)

Connectors: INPUT-A (MONO) jack, INPUT-B jack, OUTPUT-A (MONO) jack, OUTPUT-B jack, EXP jack, AC adaptor jack (DC 9 V)
Power Supply: Alkaline battery (9V, 6LR61), AC adaptor (sold separately)
Current Draw: 95 mA

Expected battery life under continuous use (These figures will vary depending on the actual conditions of use.)
Alkaline: Approx. 3 hours

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTE," and "Information")
Alkaline battery (9V, 6LR61)

Options (sold separately) AC adaptor: PSA series
Expression Pedal: BOSS FV-500H, FV-500L, Roland EV-5

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 450 g / 1 lb

Notes: Part of Boss's 200 series, the SY-200 is the latest in a range of guitar synth pedals dating all the way back to the 1970s. Plug in any guitar or bass and layer synth sounds over the raw tone. A versatile and creative way to explore new sounds.

Supplier's Notes:
A World of Synth Tones at Your Feet

Offering a universe of rich, analogue-inspired polyphonic tones in a small footprint, the SY-200 makes it simple to weave BOSS's expressive guitar and bass synth technology into all of your musical journeys. Building on the fun, instant-gratification experience of the acclaimed SY-1, this blue inspiration machine features an expanded sound set, more tone-shaping possibilities, and 128 memories for storing your sonic creations. Two onboard footswitches provide deep real-time performance control, and you can take things even further with external footswitches, an expression pedal, and MIDI.

A Massive Library of Expressive Synth Tones

The SY-200 transforms your guitar or bass into a versatile analogue-flavoured synth, ready to infuse your music with dynamic, compelling, and evocative new voices. This streamlined stomp gives you 171 total sounds organized in 12 intuitive categories, along with adjustable parameters for customizing the tone and response. And with 128 memory locations, you're able to store your favourite sounds and instantly recall them while performing.

Build Custom Sounds Fast

With the SY-200's informative display and hands-on controls, it's quick and easy to call up sounds and balance the direct and synth levels. All the preset synth tones have been dialled in by the BOSS engineers to be inspiring and playable right away. But if you want to go deeper, you can tweak three different parameters for each sound via dedicated knobs.

Flexible Connectivity

The SY-200 smoothly integrates into your setup in a variety of ways. Patch it in your chain like a regular pedal, or use the send and output jacks to route synth and straight guitar sounds to different destinations. And with the send/return loop and level knobs, it's possible to craft unique hybrid sounds by blending one or more pedals in parallel with different synth voices.

Powerful Real-Time Control

The SY-200 provides a massive range of control options while taking up minimal space on your pedalboard. Two customizable footswitches offer multi-functional operation with press-and-hold functionality, allowing you to control synth on/off, memory scrolling, pitch bend, synth hold, and more. Expanded control is possible via external footswitches or an expression pedal, and MIDI I/O is also available to interface with other MIDI-equipped pedals and devices like the ES-8 and ES-5 loop switchers.

Plug-and-Play and Latency-Free

You can use the SY-200 with any guitar or bass-just plug in with a standard 1/4-inch cable and start creating. Thanks to custom DSP and the latest BOSS innovations, you'll enjoy latency-free performance that's a natural extension of your instrument, letting you play freely without altering your normal technique in any way.

Supercharge Your Music with a Diverse Range of Sounds

The SY-200 is loaded with a large library of synthesizer tones to inspire new ideas and bring fresh voices to your music.

LEAD-A wide range of sounds suitable for single-note soloing.
PAD-Full tones that work great with chords, from layered pads to synth brass and more.
STRING-Classic analog-style strings, including layered voices and sweeping textures.
BELL-Percussive synth sounds with metallic resonance.
ORGAN-A large selection of organ sounds, including many with rotary-style modulation.
BASS-Fat synth bass sounds, including filtered and sub-octave tones.
DUAL-Fat synth tones with stacked oscillators.
SWEEP-Dynamic sounds with expressive and engaging movement.
NOISE-Classic analog-style synth noise. Great for percussive sounds and dramatic effects.
SFX-A variety of synth sound effects, including explosive one-shot sounds, animated pitch/filter voices, and more.
SEQ-Pulsating sounds with rhythmic pitch or filter changes.
ARPEGGIO-Generate rhythmic arpeggios based on the notes you play.

Specifications

Sampling Frequency: 44.1 kHz
AD/DA Conversion24 bits
Processing: 32-bit floating point

Modes: 12 modes
LEAD, PAD, STRING, BELL, ORGAN, BASS, DUAL, SWEEP, NOISE, SFX, SEQ, ARPEGGIO

Memory: 128
Nominal Input Level: INPUT, RETURN: -10 dBu
Maximum Input Level: INPUT, RETURN: +7 dBu
Input Impedance: INPUT, RETURN: 2 M ohms
Nominal Output Level: OUTPUT, SEND: -10 dBu
Maximum Output Level: OUTPUT, SEND: +7 dBu
Output Impedance: OUTPUT, SEND: 1 k ohm
Recommended Load Impedance: OUTPUT, SEND: 10 k ohms or greater
Bypass: Buffered bypass

Controls:
ON/OFF switch, MEMORY/CTL 1 switch
TYPE knob, MEMORY knob, 1 knob, 2 knob, 3 knob, D. LEVEL knob, E. LEVEL knob, VARIATION knob
MENU button, EXIT button

Display: Graphic LCD (132 x 32 dots, backlit LCD)

Connectors:
INPUT jack, OUTPUT jack, SEND jack, RETURN jack: 1/4-inch phone type
CTL 2, 3/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 230 mA

Expected Battery Life Under Continuous Use: Alkaline: Approx. 5 Hours
* These figures will vary depending on the actual conditions of use.

Accessories: Leaflet "USING THE UNIT SAFELY"
Leaflet "To obtain the Owner's Manual"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold separately)
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height (including rubber foot): 65 mm / 2-9/16 inches
Weight: 630 g / 1 lb 7 oz
Weight (including battery): 700 g / 1 lb 9 oz

0 dBu = 0.775 Vrms

Notes: Make your playing soar with majestic ambience

Powered by Multi-Dimensional Processing technology (MDP), the TE-2 Tera Echo produces a dynamic new stereo ambience effect that goes far beyond traditional delay and reverb.

Multi-Dimensional Processing for Superior Tone

Roland's innovative Multi-Dimensional Processing (MDP) analyses audio signals in many dimensions and applies ideal effects to each. By giving different dynamic changes relative to the input signal in real time, MDP can create bold, all-new sounds with a previously unattainable range of expression.

TE-2: Inspirational Echo

Thanks to MDP, the TE-2 delivers an amazing new ambience effect that satisfies and inspires. Complex internal processing produces an incredibly deep and spacious sound, dramatically enhancing the straight guitar tone without overwhelming it. Through the TE-2's simple, familiar stompbox controls and incredible sensitivity to your playing dynamics, an extremely wide range of sounds can be achieved. And with the expressive Freeze function, you can hold the current effect sound to create rich soundscapes for lead playing and sonic exploration.

The 100th BOSS Compact Series Model!

The TE-2 Tera Echo represents a milestone as the 100th model in the long history of the BOSS compact series. Starting with the release of the OD-1 Overdrive in 1977, BOSS' legendary stompboxes have been integral tools of artistic expression for millions of players around the world. Fuelled by a spirit of dedication and innovation that began nearly four decades ago, the TE-2 carries on the BOSS legacy of bringing inspiring, leading-edge technologies to musicians everywhere.

Specifications:

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Controls: Pedal switch, E. LEVEL knob, TONE knob, FEEDBACK knob, S-TIME (Spread Time) knob
Indicator: CHECK indicator (Used for indication of HOLD, and to check battery)
Connectors:, INPUT-A (MONO) jack, INPUT-B jack, OUTPUT-A (MONO) jack, OUTPUT-B jack, AC adaptor jack (DC 9 V)
Power Supply: Alkaline battery (9V, 6LR61), AC adaptor (sold separately)
Current Draw: 90 mA

Expected battery life under continuous use:
Alkaline: Approx. 3.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTE," and "Information")
Alkaline battery (9V, 6LR61)

Options: (sold separately): AC adaptor (PSA series)

Size & weight (including battery)

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: 435 g / 1 lb

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


A characteristically unique take on mixing from Buchla, with six mono inputs and a built-in mic/guitar pre-amp. Each channel can be cued to a monitor mix, while the first and last channels also include voltage-controlled panning.

Supplier's Notes:
The Tiptop 207t is a modern reimagining of the classic Don Buchla 207 Mixer/Preamplifier from the 1970s 200 Series. This stereo mixer comes with a built-in preamp that allows you to boost external instruments and microphones, making it a versatile tool for any modular setup. The 207t also features a six-channel mixer with a variety of signal routing options, including the ability to route channels to the monitor and L&R signal outputs, with per-channel control over loudness and panning.

Each channel has a Mon switch that sends the channel's signal to the monitor outputs, which are always full-volume and summed to mono, making it useful for basic monitoring applications or rudimentary mixing. The Prog switch sends the signal to the L&R signal outputs, with loudness controlled by the Level Adjustment slider and panning determined by the Channel Assignment knobs. The first and sixth channels offer voltage control of panning; these channels are hard-panned when no CV is applied.

The preamp section features a 1/4" input and multiple gain settings, making it suitable for use with external line level instruments, electric guitars, or dynamic microphones. The continuous amplification control provides added flexibility for your audio needs. Finally, the Expansion In is a stereo input that sums to the left and right main outputs, which is great for chaining multiple 207t modules or adding another stereo source at the final output.

While the 207t's functionality may be simple, it is an essential part of any 200t system, serving as the glue that holds everything together. The Tiptop 207t is a fantastic mixer/preamp option that delivers quality sound and reliable performance.

Buchla 207t Features

Mixer/preamp module based on Don Buchla's original 207 design
Six-channel mixer with per-channel level control and panning
Voltage-controllable panning on channels 1 and 6
Manual panning on channels 2-4
Program switches can act as channel mutes for main outputs
Mon switches route signal (in mono) to Monitor output
Expansion input useful for stereo chaining and more
Re-designed preamp for high audio fidelity
Preamp suitable for use with external instruments, electric guitars, dynamic microphones, and more

Eurorack module
28hp wide

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Celebrating the 50th anniversary of this truly iconic synth, the 'modern' take on the classic Buchla Music Easel doesn't mess with a winning formula, paring the 208C sound source with 218e touch-sensitive keyboard.

Supplier's Notes:
The Buchla Music Easel was one of the first truly portable electronic music instruments. Fifty years ago, in 1973, only a few dozen were made. Unlike many iconic technologies, the influence was not grown through force of scale, but rather the force of the ideas. The Music Easel made available virtually every musical dimension: timbre, melody, rhythm, and time; how these dimensions intersected was no longer the court of acoustics and material, but signals and voltage. The 208 Stored Program Sound Source engendered "a new functional organization [with a] particularly rapid system of patching and program storage via plug-in cards."

Taking cues from the then-recent discipline of cybernetics, the 218 touch plate was for "real-time communication" to help realize the "potential vocabulary" of the Easel, rather than exploiting existing modes of musical virtuosity. The Stored Program Cards ensured rapid repeatability and repertoire on its own terms. The battery terminals made sure the music was as portable as any acoustic instrument. And the name let you know it was designed for art rather than science.

Buchla is ecstatic to revive the Music Easel for its third run in 50 years. Buchla first released the updated 208 Stored Program Sound Source, dubbed the Easel Command, with expanded MIDI and USB capability. Next came the update of the Easel Program Manager - a complete kit for storing and recalling sounds sources, even more rapidly than imagined in 1973. The new 218 Touch Activated Voltage Source provides the optimal input facility, as originally envisioned. It is now all together in a rugged case and the advanced EMBIO module that unifies all the audio and control inputs and outputs for integration with the rest of your musical world.

More than a retro novelty, the Music Easel still speaks to a future we strive for. A technology that invites conversation, not chats, and controls that engage expression, not work. There are many new worlds to explore in this instrument created at the crossroads of the jazz and computer ages. Designed as "an integrated assemblage of functions", rather than a collection of modules, the Music Easel's colour coding, comfortable access to controls, and solid patch connections allow for satisfying sessions of sonic discovery.

The Music Easel is available for pre-order starting June 16 at Buchla.com and your favourite Buchla Dealer. Delivery of the Music Easel (modern) is expected fall 2023.

Stored Program Sound Source Model 208C

The sound source of the Music Easel is the 208C, which includes a complex oscillator and a modulation oscillator (which can also serve as another voice), each with independent switchable waveforms, as well as a noise generator, allowing for rich and intricate sound design. The 208C also features a five-stage sequencer, envelope generator, pulser and modulation source - with switchable triggers - allowing for complex patterns and evolving textures. The dual low pass gate provides dynamic control over the tone and amplitude of the sound, as well as natural-sounding decay and sustain. The 208C has a number of modulation sources, including a random voltage generator, the envelope generator, modulation oscillator, and an envelope detector. These sources can be used to modulate various parameters via the extensive patchfield - creating movement, texture, and complexity. The 208C also includes a mixer section with spring reverb.

Touch Activated Voltage Source Model 218e (v3)

The first design appeared in the 1973 release of the Buchla Music Easel and named for the spacecraft that delivered astronauts to the moon. Providing the familiar piano key layout for this early mobile music machine, the additional controls and capabilities were an interface for exploring uncharted musical territory. With the new version 3, it's been elevated with a new foundation of stable, modern electronics with incredible sensitivity and accuracy - the lightest touch will produce triggers and control voltages. The adjustable sensor has the dynamic range and durability to handle your playing. The new texture not only improves the sensing, but provides a satisfying tactile experience. As always, pressure is an expressive output, adding an extra dimension to the control. MIDI outputs velocity and polyphony, as well as channel pressure, making the 218e a uniquely expressive controller. The 218e includes portamento and an arpeggiator, which can be driven by external inputs and are allowed to interact with the automated notes to make patterns more complex. Additional controls allow you to blend different patterns and randomness to easily change from the expected to the surprising. The classic preset voltage knobs offer several possible ways to shift your sounds into new territory. Not only can the knobs be used for quick access to voltages for your patch, they can control arpeggiation modes and octave shifting. Pads output pulses for additional control. The 218e also gives you a unique interface to playing your existing MIDI gear and soft synths. Each touch outputs note name, channel pressure, and velocity for every note, along with sustain controls from a pedal. Polyphonic MIDI mode lets you play chords. The touchstrip can act as a pitch bend control, or as a mod wheel for additional expressive control. Easily configured using the front panel controls, you can send notes and controls on any MIDI channel.

Electric Music Box Input/Output (EMBIO)

Maintaining the spirit, sound, and process from the original, the new Music Easel adds a variety of new features. Buchla's latest renditions of the Stored Program Sound Source and Touch Activated Voltage Source are tied together with the Electric Music Box Input/Output (EMBIO) module. This of course provides MIDI out (mini jack and USB) and CV out from the 218, MIDI in to the 208, and the audio out from the 208C. Additional creative control comes from the Audio Mixer, for integration with other Buchla modules and systems, and the CV conditioners and controls. The slew control can turn your sequencer into a wavy modulator, or soften up a square LFO. The attenuator and crossfader gives you the opportunity to find new levels and combinations of voltages from existing ones. The pulse converter offers new rhythms to trigger. And a simple LFO provides another valuable modulator when you just can't quite let yourself flip that Mod Osc switch from "high" to "low."