100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 58 on page 1 of 2
1  2  »
Cat: 731192 Rel: 19 Jun 19
 
CV-controlled 5-channel stereo mixer - 10HP
Notes: X-PAN is a compact and powerful 5 channel Voltage Controlled Stereo Mixer with Low Noise and High Headroom allowing for creation of complex panoramic audio imagery in just 10hp.

X-PAN is highly responsive to control signals allowing for exploration of the fluctuating stereo sidebands possible with Audio Rate Crossfading and Panning. X-PAN is Direct coupled for use as a CV Processing and Routing toolbox.

X-PAN consists of two full featured Channels and one simpler Channel. The top two Channels each have voltage controlled cross-fading and panning while the third Channel is a stereo aux input with stereo VCA. All three Channels are combined together at the stereo SUM outputs.
Read more
 4 in stock $212.86
Cat: 728383 Rel: 09 May 19
 
New and improved version of the Qu-Bit Chord - 14HP
Notes: Polyphony is back!

Chord v2 is a plug and play solution for bringing musical polyphony to your system. It contains four oscillator voices, a multitude of waveforms, and intelligent tuning functionality. This new version features an expanded sonic palette and feature set in half the size of the original.

It features three primary modes of operation: Chord, Free Running, and Unison. These three modes allow the oscillators to be tuned as diatonic chords, run independently of each other, or be tuned to the same internal frequency for external v/oct sequencing through independent CV inputs.

The timbral possibilities of the Chord v2 bring its polyphonic tones to life. The module ships with eight banks of waveforms encompassing traditional shapes, vocal synthesis, organ emulation, and chiptune sounds. You can also load custom wavetables using the SD card slot on the front panel.

From harmonic drones to Switched On Bach, the Chord v2 is an unparalleled addition to any Eurorack modular.

Changes from v1:

- Half the size! 14HP down from 28HP
- Eight banks of waveforms
- Full polyphonic mode
- Harmonize in minor mode
- Custom wavetable compatibility
- Expanded chord types
- Improved synthesis engine
Read more
 4 in stock $271.68
Cat: 690950 Rel: 25 Oct 18
 
Stereo effects processor - 16HP
Notes: Erica Synths Black Hole DSP 2, an updated version of Black Hole DSP features 24 custom effects, designed in close co-operation of Erica Synths team rider KODEK and creator of SpinCAD software Gary Worsham. Each effect has 3 manually and CV controllable parameters, manual and CV control over sampling frequency for spanning from 48kHz to really Lo-Fi crunchy sound and full analogue dry/wet control. All effect parameter settings can be saved to the memory and instantly recalled with the effect, which makes Black Hole DSP II ideal for live performances.
Read more
 2 in stock $287.73
Click for better price!
quote 690950
Cat: 737960 Rel: 21 Aug 19
 
All-analogue dual stereo crossfader - 6HP
Notes: Stereo patching is becoming more common each day in the Eurorack Modular Synth System and we here at the shop are performing out a ton. Over the past couple years we consistently felt the need for a simple crossfader module that would allow users to switch between two stereo sources, add a stereo effect path, or easily mix a mono source with a stereo one. AXYS was born from this need.

Each crossfader features stereo inputs with normalling for mono to stereo uses as well as independent CV control. Control both crossfaders with one CV easily and decide how the Y will react to X's CV.

Easily transition between two performers similar to a DJ transitioning between decks with one channel and add some master buss effects with the other. Use one channel for adding stereo effects and the other to dial up some nice parallel compression. Perfect for live performance and momentary effect blasts. A simple easy to use module with tons of uses.

All analogue signal path keeps your tone intact and sounding the way you intended it to.
Read more
out of stock $239.61
Cat: 725423 Rel: 19 Mar 19
 
Multi-dimensional signal processor with stereo inputs & outputs
Notes: Prism is a multidimensional signal processor that creates a framework for the spectral metamorphosis of any input signal. This stereo audio buffer can be navigated through on 3 axes, each of which provides a different sonic journey through its array of time based controls.

The X and Z planes are home to a flexible delay line capable of long clocked delays, slapback echo, or comb filtered vocoder-esque timbres. On the Y axis is the decimate control. This sets the audio fidelity of the buffer by manipulating the sample rate and bit depth of the output. A state variable filter with configurable low pass, high pass, and band pass outputs can be enabled at the beginning or end of the signal chain providing yet another dimension of spectral transformation. And thanks to its digital architecture, the current buffer contents can be locked in place with the Freeze control, creating glitch and beat repeat effects which can be synced to an external clock source.

The Prism blurs the lines between DSP effect, filter, and looper and transcends into a new realm of uncharted audio processing.
Read more
 1 in stock $235.32
Cat: 747621 Rel: 20 Sep 19
 
8HP drum/percussion synth module
Notes: Originally inspired by audience applause, hip-hop samples, and classic drum machines, Fracture is a multi-particle percussion synthesizer that applies concepts from classic analogue clap circuits to granular synthesis methods.

It all starts from proprietary micro-samples we recorded specifically for this purpose and ends with an engine built to suit these samples.
Unlike our other percussion module, the Chimera which uses impulse rich samples as it's tonal centre, Fracture uses single impulse samples like Claps, Snaps, Ping Pong Balls, Opening a beer can, and many more. It then plays a group of similar samples back in a psuedo random order for unique hits. Density, Decay, and Tail affect tone and how "tight" your virtual clappers are to playing together.

Our goal was to design a clap percussion module covering the range from classic drum machine claps all the way to full audience applause. We ended up with a module that covers a huge range of timbres beyond claps. We hope this engine provides you with the tools to intuitively create wild percussion sounds that bring your system to life in a new way.
Read more
 5 in stock $238.53
Cat: 742228 Rel: 05 Sep 19
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: More aggro filth from the troubled minds at Schlappi Engineering. This time it's a distortion/filter module with touch-sensitive metal conductors for hands-on control. Screaming saturation and self-resonance ideal for angry techno. Nasty.

Supplier notes:
The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 2 in stock $272.77
Click for better price!
quote 742228
Cat: 718062 Rel: 18 Feb 19
 
2-channel quantizer & step sequencer - 8HP
Notes: Scales is an 8hp dual-channel note quantizer and step sequencer. Fundamentally, it takes an input voltage, quantizes it to notes in a user-defined scale, and sends that quantized voltage to an output, where you can use it as a melodic pitch source for oscillators or any other module that expects to see discreet note values at its input.

Scales goes far beyond the fundamental, allowing you unprecedented control of the pitches and intervals hiding inside your control voltages; turn LFO's into arpeggiators; random voltages into harmonic counterpoint; and unquantized external CV sequencers into chromatically tuned note sequencers.

Quantization can be locked to an incoming trigger. There are a number of trigger output options as well, ranging from no triggering (good for pitch shifting drones); through triggers that sync with either of the two outputs (or both); to a trigger or gate transmitted in sync with one sent to the module's TRIG input.

Shift:

Scales features two independent outputs, enabling you to create shifted harmonic intervals within your chosen scale using only a single pitch input. Using the SHIFT input you can modulate changes on OUT A and/or OUT B.

You can also use the shift input to switch between scales or to change the root of any existing scale pattern or split Scales into two quantizers - each conforming to a common scale, but fed entirely different voltage sources.

Sequence:

Scales also features a 128-step SH-101 style step sequencer (complete with storage for up to 35 fully programmable patterns) - allowing you to feed OUT B with sequenced notes and rhythm patterns, while OUT A continues to function as a standard pitch quantizer for external voltages. You can even sync the sequencer to quantizer events on OUT A.
Read more
 1 in stock $275.96
Cat: 688775 Rel: 31 Jan 19
 
Flexible five stage function generator - 19HP
Notes: The 'Quaid Megaslope' is a five stage function generator or modulator which operates in one of 3 modes; a multistage 'CZ' or 'Juno' style complex envelope, a super flexible LFO and a step sequencer with per step programmable slew or slides.

Each mode produces a varying output voltage moving from point to point across a set number of chained together stages. Each stage features a destination level, an overall rate or time to reach its destination level and a variable slope for the output path to take. As well as direct control, every stage feature voltage control of both level and rate. There are both unipolar and bipolar voltage outputs together with triggers emitted for the end of each stage and the end of a full cycle.

The Quaid Megaslope is designed to be fun, flexible and intuitive to use.
Read more
 2 in stock $228.90
Click for better price!
quote 688775
Cat: 676695 Rel: 20 Dec 18
 
Four-channel MIDI-CV interface for playing polyphonic patches - 16HP
Notes: Module A-190-5 is a four voice Midi/USB to CV/Gate interface. For each voice a pitch control voltage (CV1, 1V/octave standard to control VCOs), a gate output (to control envelope generators) and two additional control voltages (CV2, CV3) are available. The two additional CV outputs can be controlled by Midi velocity, volume, modulation, pitch bend, after touch or free assignable Midi controllers.

- Four voice monophonic (i.e. to control four monophonic voices by four succeeding Midi channels)
- Four voice polyphonic (i.e. to control four monophonic voices by one Midi channel) with several sub-modes (e.g. rotating/non-rotating)
- Two voice polyphonic (i.e. to control two monophonic voices by one Midi channel)
- Unisono

The basic mode is selected by means of a momentary switch (probably Mode or Algor.) and is shown in the LC display. Certain parameters of each mode can be edited (e.g. the midi channel(s), the midi reference note for 0V CV, assigned controllers for CV2 and CV3). For this the momentary switch Edit/Play is used. The parameter values (e.g. midi channels) are shown in the display and can be modified by means of the momentary switches 1...4. In Play mode the LEDs of these four switches display the gate states.
Read more
 1 in stock $271.68
Click for better price!
quote 676695
Cat: 689669 Rel: 14 Feb 19
 
Punchy kick drum module - 6HP
Notes: Kickall is a 6HP compact synth voice that features everything needed to make a big fat Kick sound: A stable VCO that tracks V/oct, a couple of VCAs, envelopes for volume and pitch and an aggressive wave shaper.

The module has been designed with a kick synthesis patch in mind: VCO to VCA with an envelope to open the VCA and another one to change VCO pitch. As addition a CV controlled waveshapper has been added to the VCO and an extra VCA at the end of the signal path to control the volume of the sound to act as kind of an accent.
Read more
MRP:$275.97 SAVE 18%
 3 in stock $225.70
Click for better price!
quote 689669
Cat: 750274 Rel: 06 Feb 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Hi-Hats D is Erica Synths take on classical digital hi-hats. Instead of using an integrated circuit DAC chip Hi-Hats D are using 6-bit discrete DAC for that unmistakable crunchy sound. For amplitude shaping samples are passed trough AS3330 based VCA and are controlled with an analogue envelope generator for versatile and snappy sound. Extra feature is Open Hi-Hat looping - when it's on, a certain part of the sample is looped while the envelope decay is on, thus creating distinct, delay-like effect.

Erica Synths Drum Sequencer has connectors for internal Trigger and Accent connections to Erica synths Drum modules. The connections are made via six wire ribbon cables with 2x3 connectors (similar to Eurorack PSU connectors), and you can save some patch cables if you have a lot of Erica Synths Drum modules. Internal connections will work only with Erica Synths modules and no other manufacturer module will support this functionality. If you have Erica Synths Drum Sequencer and other Erica Synths Drum modules and want to use internal connections, select "Hi-Hats D with internal connectors" option. If you do not want to use internal connections, select cheaper "Hi-Hats D without internal connectors" option.
Read more
out of stock $219.84
Cat: 712706 Rel: 10 Jan 19
 
Drum modulator featuring two independent modulation/pitched noise sources
Notes: Erica Synths Modulator is an advanced modulation and pitched noise source with focus on rhythmic (but not limited to) compositions in mind. It features two identical syncable to the BPM LFOs/noise sources with selectable morphing waveshapes. LFO frequency can be manually adjustable, as well as they provide frequency divisions and multiplication in Sync mode. Each LFO has two outputs- main one and secondary one with adjustable phase, so you can create evolving modulations. Furthermore, LFOs can be linked to work at the same frequency and the first LFO has built in VCA to control output signal amplitude.
Read more
 1 in stock $211.78
Click for better price!
quote 712706
Cat: 746361 Rel: 16 Sep 19
 
Multiband distortion & VCA module
Notes: Distortion is fun, but it's even better when you split it up across the frequency spectrum. Seca Ruina takes an input, splits it up into three frequency bands, and lets you drive them into annihilation. SR includes a bypassable VCA on the output and CV over individual band and universal drive amount. With individual outputs for each band, you can process each band further externally. So much potential in only 6hp!
Read more
 1 in stock $203.23
Click for better price!
quote 746361
Cat: 712709 Rel: 10 Dec 18
 
Distinct topology digital/analogue cymbals module - 10HP
Notes: Erica Synths Cymbals is a distinct topology digital/analogue module, where cymbal samples are passed through AS3330 based VCA and controlled via envelope generators of unique design. The module features 10 sets of custom Crash and Ride cymbal samples with Tune control and individual Decay control. Accent and CV control over Tone and Decay allow you to create lot of variations in the Cymbals track. An extra feature is sample looping - when it's on, a certain part of the sample is looped while the envelope decay is on, thus creating a distinct, delay-like effect. Cymbal samples are developed by producer and musician Nero Bellum.
Read more
 1 in stock $204.30
Click for better price!
quote 712709
Cat: 690941 Rel: 06 Feb 19
 
Sample-based drum module with analogue VCA & decay envelope - 10HP
Notes: Hi-Hats D is Erica Synths take on classical digital hi-hats. Instead of using an integrated circuit DAC chip Hi-Hats D are using 6-bit discrete DAC for that unmistakable crunchy sound. For amplitude shaping samples are passed trough AS3330 based VCA and are controlled with an analogue envelope generator for versatile and snappy sound. Extra feature is Open Hi-Hat looping - when it's on, a certain part of the sample is looped while the envelope decay is on, thus creating distinct, delay-like effect.

Erica Synths Drum Sequencer has connectors for internal Trigger and Accent connections to Erica synths Drum modules. The connections are made via six wire ribbon cables with 2x3 connectors (similar to Eurorack PSU connectors), and you can save some patch cables if you have a lot of Erica Synths Drum modules. Internal connections will work only with Erica Synths modules and no other manufacturer module will support this functionality. If you have Erica Synths Drum Sequencer and other Erica Synths Drum modules and want to use internal connections, select "Hi-Hats D with internal connectors" option. If you do not want to use internal connections, select cheaper "Hi-Hats D without internal connectors" option.
Read more
out of stock $235.32
Cat: 728569 Rel: 20 May 19
 
synth module with professional trigger input and audio input
Notes: Feel the sizzle as you harness the energy of liquid metal. Forge your sonic desires, and rain hot fire onto the eardrums of your listeners. Cymbals, gongs, bells, and sheet metal are the territory of Crucible.

Have you ever wanted to start with the smallest cowbell, and then CV it until it becomes a gong larger than the room you're standing in? Crucible makes this possible.

By utilizing classic digital synthesis blocks like delay and digital filters, Crucible can fully synthesize, in real time, sounds similar to thin struck pieces of metal.

We expose the engine to the user through parameters specifically chosen for their sonic resemblance to the "parameters" of a real drum kit cymbal.

Size, Pitch, Tone, and Deform give the user the tools to shape their cymbal. The Excite knob allow the user to shape their exciter, completely changing Crucible's response. Finally, select where the exciter contacts the engine by triggering the EDGE and MID inputs, or trigger both to strike the "bell."

All of this adds up to a module that is lively and energetic, completely mimicking the feeling of playing a real cymbal, while still incorporating WMD's "New Sounds, Maximum Experience" philosophy.

- Realistic sound!

- Positional trigger input. Hit the edge, middle, or bell.

- 3 Model Types: Cymbal, Cracked Cymbal, and Curved Plate

- Audio input for experimental effects.

- Separate Pitch and Size controls for maximum realism.

- Choke input for perfectly timed catches.

- Proprietary Synthesis model using digital filter and delay networks. No samples!
Read more
 4 in stock $262.06
Click for better price!
quote 728569
Cat: 708087 Rel: 23 Jan 19
 
Sample & Hold, Track & Hold, Gated Slew, Clock & Noise generator - black, 12HP
Notes: A real powerhouse module that takes up only 12 HP of rack space. It can generate random and pseudo random control voltages, staircase waveforms, deliberate aliasing of audio signals, portamento type effects, adjustable audio range noise and has many other uses too.

It can be switched between Sample & Hold or Track & Hold modes, and the unique "Restrict" control affects the way the hold output changes with respect to the current input level and previously held output level. With the control fully off the unit behaves just like any other S/H, but at fully clockwise the output is restricted to move by only a small amount after each new sample. The output will still have the same range as the input, but will need more hold commands to get there. This versatile Sample and Hold circuit was designed by Tony Allgood, and is built under licence from Oakley Sound.

The Sample Hold & Slew module also includes a very well featured Slew generator, which includes a Gated Slew function. It can be used independently or chained with the S&H module. Slew mode can be switched between Linear or Exponential Slew types. There is a Gate input, so that the Slew on/off can be switched using an External CV (Gated Slew), and also the Slew control logic can be reversed by a toggle switch that doubles as a manual Slew on/off switch. In addition, it has slew up only, slew down only or slew up and down modes, which are selected with a three-way toggle switch. An indicator LED lights when Slew is active

There is also an inbuilt analogue Noise generator, which is normalised to the input of the Sample and Hold section, and there are both regular and clipped Noise outputs - the Clipped Noise is particularly useful with the sample and hold section, as it is weighted to produce higher random voltages. Both Noise outputs are fed through an internal "Noise Colour" control - at centre position it allows the noise through unfiltered, turning the control anti-clockwise introduces low pass filtering of the Noise, and rotating it clockwise introduces high pass filtering. The Noise source itself is based on an analogue band gap shunt regulator configured in avalanche mode, and it generates white noise with a gradual roll off above 8kHz. It is a little "grainier" in character than the noise from our MiniMod Glide & Noise module (which uses a reverse biased transistor as a noise source), so is a useful compliment to this module as it does not generate exactly the same sounding Noise

Lastly, it includes a wide range clock generator with a rate LED. The range is from one cycle every thirty seconds to around 2 kHz and the clock output is normalised to the Clock Input of the S&H section. It also has a Clock Out jack so that it can be externally patched to other Eurorack modules.
Dimensions: 12HP wide, 26mm Deep
Current draw: 55mA Positive, 40mA Negative
Read more
 1 in stock $221.42
Click for better price!
quote 708087
Cat: 734882 Rel: 18 Jul 19
 
High-quality dual linear VCA with mixing functionalities
Notes: Audiophile Circuits League VC Dual Amp contains two fully discrete voltage controllable amplifiers with linear characteristic. It is based on a new circuit design which delivers unheard clarity of sound. To this day there is no other VCA using this special technique!

The module offers a very low harmonic distortion in the whole linear gain range, no crossover distortion and no overshoots nor ringing. Furthermore, it has a very high dynamic range which provides a lot of headroom. The VCAs will amplify the input signal very accurately and it will sound crystal clear, without any coloration, distortion or bleed. Each channel has a Gain potentiometer for manually setting the VCA's initial gain and a control voltage input which is equipped with an attenuverter for scaling the modulation.

Thanks to normalized signal and CV inputs, both VCAs can be used in conjunction - great for processing stereo material. Furthermore, you can create voltage controlled panning effects and crossfades in next to no time. Beside the two individual audio outputs from each VCA, there is a Sum-output which provides the mix of the output of both VCAs and of the signal coming from the Aux-input. This additional input has no level control and is mixed at unity gain. Thus three different signals can be mixed together.

The amplifiers are also suitable for processing control voltages thanks to a completely DC-coupled signal path. Behind its simple appearance, this module shines with its functionality and sound quality!
Read more
 1 in stock $289.87
Click for better price!
quote 734882
Cat: 706888 Rel: 10 Dec 18
 
Quadrature sine wave VCO/state variable filter - 18HP
Notes: The SPIN section is a quadrature sine wave oscillator. The GRIND section compares each phase against the input signal, then subtracts the resulting square waves from the input signal. If the spin section is either damped enough or enough signal is fed into it from the GRIND section then it will stop oscillating and become a state variable filter.

The Angle Grinder tracks volts per octave and can be used as a sine wave oscillator with voltage control over harmonic content available at the GRIND OUT. With no input it's four phase related sine outputs (0, 90, 180, and 27 degrees) remain clean from 0.1Hz to over 20kHz and are suitable for quad panning or XY applications.

With an input signal applied the GRIND out ranges from quadrature pulse width modulation (at LFO rate) to sync-like metallic tones (at audio rate). When GRIND is fed into the SPIN then it becomes a nonlinear feedback network with the faders and corresponding CV inputs providing instinctive control over phase cancellation, oscillation, and distortion. The four phase related outputs will become low pass, band pass, high pass, and inverted band pass filter outputs.

The function of the Angle Grinder depends on both the position of the knobs and the presence of an input signal.
Read more
 1 in stock $278.11
Cat: 742229 Rel: 05 Sep 19
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 2 in stock $279.17
Click for better price!
quote 742229
Cat: 739134 Rel: 16 Jul 19
 
Random looping sequencer - silver faceplate, 12HP
Notes: Permutation is a set of random sequencers that use a digital shift register to generate unpredictable CV and gate patterns that can be locked into repeating loops. The concept is based on the Turing Machine, an open source module designed by Tom Whitwell.

Permutation retains the core functionality of the Turing Machine while adding new features such as dedicated outputs for each bit of the shift register, CV inputs for all parameters, and an internal bipolar VCA. Locked sequences are also saved across power cycles.
Read more
 1 in stock $228.90
Cat: 731220 Rel: 15 Jul 19
 
Expander for the Demon Core Oscillator - 8HP
Notes: This module brings polyphonic control to the Demon Core oscillator.

The stacks can be divided between up to 16 polyphonic voices via MIDI or four 1V/oct inputs with attenuator. The oscillator can be set in continuous streaming mode or in MIDI gating mode with an ADSR envelope for each polyphonic voice.

The time sync can be also triggered via MIDI for each voice.
Read more
 1 in stock $254.57
Click for better price!
quote 731220
Cat: 749676 Rel: 18 Feb 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Scales is an 8hp dual-channel note quantizer and step sequencer. Fundamentally, it takes an input voltage, quantizes it to notes in a user-defined scale, and sends that quantized voltage to an output, where you can use it as a melodic pitch source for oscillators or any other module that expects to see discreet note values at its input.

Scales goes far beyond the fundamental, allowing you unprecedented control of the pitches and intervals hiding inside your control voltages; turn LFO's into arpeggiators; random voltages into harmonic counterpoint; and unquantized external CV sequencers into chromatically tuned note sequencers.

Quantization can be locked to an incoming trigger. There are a number of trigger output options as well, ranging from no triggering (good for pitch shifting drones); through triggers that sync with either of the two outputs (or both); to a trigger or gate transmitted in sync with one sent to the module's TRIG input.

Shift:

Scales features two independent outputs, enabling you to create shifted harmonic intervals within your chosen scale using only a single pitch input. Using the SHIFT input you can modulate changes on OUT A and/or OUT B.

You can also use the shift input to switch between scales or to change the root of any existing scale pattern or split Scales into two quantizers - each conforming to a common scale, but fed entirely different voltage sources.

Sequence:

Scales also features a 128-step SH-101 style step sequencer (complete with storage for up to 35 fully programmable patterns) - allowing you to feed OUT B with sequenced notes and rhythm patterns, while OUT A continues to function as a standard pitch quantizer for external voltages. You can even sync the sequencer to quantizer events on OUT A.
Read more
 1 in stock $266.13
Cat: 718065 Rel: 18 Feb 19
 
4 track gate & trigger sequencer - 8HP
Notes: Steppy is a 4-track programmable gate sequencer with eight internal memory slots, external clocking, numerous tweakable parameters, and a performance-first design aesthetic.

Each track features numerous independent parameters that govern its playback independently of the other tracks. Specifically:

- Each track has its own length, which can range from 1-step to 64-steps, allowing for polyrhythms, fills, or constantly evolving gate interactions between tracks.
- Each track has its own gate length, which ranges from very short to very long, with tied gates possible at the extreme setting.
- Each track has its own clock divider, allowing patterns to play out over completely different periods of time.
- Each track has its own swing setting, which offsets the timing of every other step.
- Each track has its own delay setting, which offsets the timing of every step.
- Each track has its own probability control, which sets the likelihood that each programmed gate will fire when called upon by the pattern.
- Each track can be shifted (or 'rotated') forward or backward by a number of steps. So if you've created a pattern that 'feels' like it has its downbeat on step 3, you can shift that pattern two steps to the left, so that the downbeat sits on step 1.

Tracks can be programmed by entering active steps on the grid or tapped in live as the sequence is moving. Tracks can be selected and modified in real time as the sequence plays. A select button allows you to directly access each track (and each page of 16 steps within that track) directly through Steppy's intuitive multifunction buttons array.

Tracks can be individually muted and unmuted, and a special performance mode (called "Loopy") enables you to touch any two gate steps and instantly create a performance that loops between those steps.

Track patterns can be cleared without clearing its playback parameters, and all track patterns (along with their individual playback and performance parameters) can be saved as a preset to one of eight internal memory slots.
Read more
 2 in stock $228.91
Cat: 738639 Rel: 09 Jul 19
 
Four voltage controlled LFO's/ VCO's with triangle & rectangle outputs in one single module - 22HP
Notes: Module A-143-4 is a fourfold voltage controlled low frequency oscillator (LFO). As the frequency range includes moderate audio frequencies it can be used as a four-fold VCO too.

- Four independent VCLFOs/VCOs with triangle core
- Frequency range switches: low (bottom position) = LFO mode, high (top position) = VCO mode
- Two frequency control CV inputs for each unit
- CV1 without attenuator (~ 1V/oct)
- CV2 with attenuator
- Manual frequency control
- Internal jumpers for the frequency range of the manual frequency controls:
- Jumper not installed: ~ +/- 1 octave range (mainly for VCO applications)
- Jumper installed: ~ +/- 5 octaves range (mainly for VCLFO applications)
- Sync inputs: Combined Reset/Direction inputs for unit #1 - #3 / Separate Reset and Direction inputs for unit #4 (normalled sockets, i.e. Reset is connected to Direction if the Direction socket is unused) / Up/both/down direction switch for unit #4, for technical details concerning the Reset and Direction function please refer to the sketch below
- Triangle and rectangle outputs for each unit
- Typ. output voltage range -5V ... +5V for both outputs (i.e. about 10 Vpp, symmetrical with reference to 0 V)
- Red/yellow LED displays for the triangle outputs (red = negative output voltage, yellow = positive output voltage)
- Common control section with two CV inputs and manual control (these inputs and controls affect the frequency of all four units)
- Sum outputs for triangle and rectangle with red/yellow LED displays
- Optional ultra-low frequency mode: for this a negative voltage can be applied via a jumper internally to the CV2 input of each unit and the common section (i.e. a negative voltage is normalled to the socket CV2 in question). Then the CV2 - - Attenuator control works as a negative frequency control (i.e. turning up this control lowers the frequency). Herewith LFO periods up to about one hour (or even more) are possible.
- Optional CV bus access via jumper (i.e. the module can pick up the CV from the A-100 bus, e.g. generated by a Midi/CV or USB/CV interface A-190-x or a bus access module A-185-1/2), if the jumper is installed the bus CV affects all four units as the bus CV is added to the CV generated by the common control section
- Typ. frequency range: < 0.001 Hz (~ one hour, LFO mode with ultra-low option) ... 15 kHz (VCO mode with installed frequency range jumpers for the manual frequency controls)
- Heat-up time: ~ 15 minutes (required to heat-up the main circuit by the affixed oven)

The module was planned mainly as a quad VCLFO. But we added a range switch (nothing but a switch for two different capacitors) so that even audio frequencies are possible and the module can be used as VCO with some restrictions too. Because of the closeness of the main circuitry (i.e. four VCO cores within less ~ 1 square millimetre) the oscillators may lock if the frequencies are very close to each other and the VCO frequencies interact marginally. If a high quality quad VCO is required the A-111-4 is recommended as this module has four separate VCO circuits available.

The reset circuitry is optimized for the LFO mode. As it takes some time to discharge the oscillator capacitor the discharge time had to be chosen so that the capacitor is fully discharged in LFO mode. In the high range (where a much smaller capacitor is used) this will cause a zero state duration in the 0.3 ms range if the oscillator is synced (during this time the capacitor is shortened for discharge).
The control scale of the inputs "CV1" is about 1V/octave. To improve the behaviour in the VCO mode a tempco circuit is used to keep the temperature of the exponential converter at a fixed temperature (similar to the tempco option of the DIY SYNTH). That way the frequency of the VCOs (and even the VCLFOs) is nearly independent from the environment temperature. But the accuracy (1V/octave scale and temperature compensation) is not as precise as for the dedicated VCOs A-110 and A-111-1.
Read more
 1 in stock $207.50
Click for better price!
quote 738639
Cat: 730066
out of stock $203.23
Cat: 718919 Rel: 23 Apr 19
 
Expander for XAOC Devices Praga mixer
Notes: The XAOC HRAD is an expander for their Praga voltage-controlled mixing console, adding CV control for Aux levels, master level control, gate-controlled muting, and other powerful features.

- Additional set of controls for the PRAGA mixer
- Stereo sum level control
- Euro/line switchable output level
- Sum LED meters
- Stereo headphone amp
- Cue input
- Mix/solo cue auditioning
- Individual AUX inserts
- Voltage control over AUX send amount
- Two stereo controls for AUX return level
- Gate inputs for VC channel muting
- Power drawn from Praga
Read more
 3 in stock $231.04
Cat: 690937 Rel: 25 Oct 18
 
Synth module for creating bass drum sounds - 14HP
Notes: Bass Drum is developed in collaboration with the French company e-licktronick and it's Erica Synths' take on analogue bass drum circuits adapted for modular systems. Massive, punchy sound, Accent & CV control over key parameters of the module make it distinctively expressive in live performances.
Read more
 2 in stock $255.64
Click for better price!
quote 690937
Cat: 702204 Rel: 19 Oct 18
 
Dedicated drum mixer with a compressor - 14HP
Notes: Erica Synths Drum Mixer with extended headroom and a dedicated drum compressor of unique design keeps each drum sound clearly distinguishable and adds power to the final mix. Bonus feature - effects send output allows to apply external effects to the signals on the first three inputs. LEDs next to each input give visual feedback on the signal level.
Read more
 1 in stock $205.37
Click for better price!
quote 702204
Cat: 745359 Rel: 01 Nov 18
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


To add some space to your compositions and nuances in sound design Erica Synths Dual FX module brings you two identical sections of 8 custom effects with two adjustable and CV controllable parameters.

Dual FX combines two Spin FV-1 chips in one module, each filled with eight custom effect programs with two adjustable and CV controlled parameters per effect and analogue dry/wet circuit. All parameter settings can be saved with the effect and recalled instantly during the performance. Also the output of the first FX section is normalised to the second input so creating huge layers of effects is easy.
Read more
out of stock $267.62
Cat: 717577 Rel: 31 Jan 19
 
Stereo mixer featuring 3 mono channel strips with level potentiometers - 14HP
Notes: Erica Synths Black Output is a high-quality output mixer and a stereo panner with balanced outputs and headphone amplifier for monitoring your modular masterpieces.

All inputs are buffered, we use stereo potentiometers (similar to those used in high quality studio mixers) for panning, IN4 is a stereo input with simultaneous level adjustment for both channels, IN3 has a CV controlled auto-pan function. There is also a 6.3mm jack for the balanced outputs and headphones.
Read more
 1 in stock $255.64
Cat: 739889 Rel: 02 Oct 19
 
Four-channel precision adder, buffered mult, and transposition tool
Notes: Quantus Pax is a four-channel precision adder, buffered multiple, and polyphonic transposition utility. Each channel has two CV inputs and can be further modified by the three Xpose inputs. QP is made with high quality low-tolerance resistors for unbeatable accuracy. Patch-wide key changes, polyphonic movement, mathematically derived melodies, and more are all to be had with this simple but useful utility.
Read more
 3 in stock $253.51
Click for better price!
quote 739889
Cat: 690947 Rel: 01 Nov 18
 
Two Spin FV-1 chips in one module, each filled with eight custom effect programs
Notes: To add some space to your compositions and nuances in sound design Erica Synths Dual FX module brings you two identical sections of 8 custom effects with two adjustable and CV controllable parameters.

Dual FX combines two Spin FV-1 chips in one module, each filled with eight custom effect programs with two adjustable and CV controlled parameters per effect and analogue dry/wet circuit. All parameter settings can be saved with the effect and recalled instantly during the performance. Also the output of the first FX section is normalised to the second input so creating huge layers of effects is easy.
Read more
 1 in stock $285.59
Click for better price!
quote 690947
Cat: 690939 Rel: 25 Oct 18
 
Synth module for creating punchy tom sounds - 16HP
Notes: Toms is developed in collaboration with the French company e-licktronick and it's Erica Synths' take on analogue toms circuits adapted for modular systems. Massive, punchy sound, Accent and Tone CV make it distinctively expressive in studio and live performances.
Read more
 1 in stock $294.15
Click for better price!
quote 690939
Cat: 741570 Rel: 29 Jul 19
 
Dynamic rhythm generator module
Notes: Integra Funkitus takes up to four input rhythms and combines and modifies them into rhythm outputs. There are three modes: two based on probability and one on generalized logic combinations.

Feed up to four rhythms from a rhythm module (such as Numeric Repetitor) into the inputs.

Connect the gate outputs to percussion modules, then turn the knobs to control how the rhythms are combined and modified.

Size: 8HP Eurorack
Depth: 1 Inch
Power: 2x5 Eurorack
Draw +12V: 50 mA
Draw -12: 5 mA
Read more
 3 in stock $235.32
Click for better price!
quote 741570
Cat: 742231 Rel: 21 Aug 19
 
Versatile band-pass filter - 12HP
Notes: TRSHMSTR is a collaborative effort between WMD and electro-dance heavyweights MSTRKRFT. TRSHMSTR features an aggressive combination of band-pass filtering (FLTR) and distortion (DRV). The FLTR and DRV sections can be used independently or together to produce a wide variety of tone-shaping, from subtle distress to full-on acid destruction. The INs and OUTs of the FLTR and DRV sections are cross-normalled, so you can run your signal through FLTR and into DRV or vice-versa with no extra patching.
Read more
 1 in stock $239.61
Click for better price!
quote 742231
Cat: 698447 Rel: 25 Oct 18
 
Analogue waveform animator & dual channel device - silver, 14HP
Notes: The WaveSwarm is a waveform animator and all analogue dual channel device.

Each channel simulates up to six VCO's beating in unison with a different beat frequency between each animation. The fixed beat frequencies are generated by twelve onboard LFO's, and the front panel pots control the level of each of the six animators, along with the level of the dry signal to the final mix. In addition to independent channel inputs and outputs it also has an A+B output, which sums the outputs of the two channels, creating an effect similar to twelve VCO's in unison! This is possible because channel B uses slightly different beat frequencies to channel A, they are not identical.

The input waveform can be saw, triangle, sine or wavetable/complex waveforms, in fact most waveforms with the exception of square or PWM waves will give some form of animation.

A soft clip circuit is built in so that at higher signal levels the signal magnitude is limited by rounding the top and bottom of the waveforms, thus slightly softening the sound. There are soft clip LED indicators for both channels.

It can produce huge, fat drones or supersaw type waveforms from a single sawtooth or triangle wave input.
Read more
out of stock $223.56
Cat: 708090 Rel: 18 Apr 19
 
Sample & Hold, Track & Hold, Gated Slew, Clock & Noise generator - silver, 12HP
Notes: A real powerhouse module that takes up only 12 HP of rack space. It can generate random and pseudo random control voltages, staircase waveforms, deliberate aliasing of audio signals, portamento type effects, adjustable audio range noise and has many other uses too.

It can be switched between Sample & Hold or Track & Hold modes, and the unique "Restrict" control affects the way the hold output changes with respect to the current input level and previously held output level. With the control fully off the unit behaves just like any other S/H, but at fully clockwise the output is restricted to move by only a small amount after each new sample. The output will still have the same range as the input, but will need more hold commands to get there. This versatile Sample and Hold circuit was designed by Tony Allgood, and is built under licence from Oakley Sound.

The Sample Hold & Slew module also includes a very well featured Slew generator, which includes a Gated Slew function. It can be used independently or chained with the S&H module. Slew mode can be switched between Linear or Exponential Slew types. There is a Gate input, so that the Slew on/off can be switched using an External CV (Gated Slew), and also the Slew control logic can be reversed by a toggle switch that doubles as a manual Slew on/off switch. In addition, it has slew up only, slew down only or slew up and down modes, which are selected with a three-way toggle switch. An indicator LED lights when Slew is active

There is also an inbuilt analogue Noise generator, which is normalised to the input of the Sample and Hold section, and there are both regular and clipped Noise outputs - the Clipped Noise is particularly useful with the sample and hold section, as it is weighted to produce higher random voltages. Both Noise outputs are fed through an internal "Noise Colour" control - at centre position it allows the noise through unfiltered, turning the control anti-clockwise introduces low pass filtering of the Noise, and rotating it clockwise introduces high pass filtering. The Noise source itself is based on an analogue band gap shunt regulator configured in avalanche mode, and it generates white noise with a gradual roll off above 8kHz. It is a little "grainier" in character than the noise from our MiniMod Glide & Noise module (which uses a reverse biased transistor as a noise source), so is a useful compliment to this module as it does not generate exactly the same sounding Noise

Lastly, it includes a wide range clock generator with a rate LED. The range is from one cycle every thirty seconds to around 2 kHz and the clock output is normalised to the Clock Input of the S&H section. It also has a Clock Out jack so that it can be externally patched to other Eurorack modules.
Read more
 1 in stock $208.57
Click for better price!
quote 708090
Cat: 734840 Rel: 15 Jul 19
 
Analogue VCO focused on all aspects of modulation - 12HP
Notes: The OSC1 from Future Sound Systems presents a voltage-controlled analogue oscillator with a few features unexpected of a basic oscillator, with a particular focus on covering all bases of signal modulation. Once triangle, sinusoidal and pulse waveforms are derived from its sawtooth core, each waveform is passed through a VCA. The outputs from these VCAs are then summed at the Mix output, which can be switched between 2- and 4-quadrant-multiplication modes. These two QM modes allow for a plethora of amplitude modulation effects to be achieved. Level controls for each waveform dictate both static level, but also depth of modulation through careful design of the control summation. Each individual waveform output is taken pre-VCA for maximum patching flexibility.

Shape modulation of the triangular, sinusoidal and pulse waveforms is also available. Both the triangular and sinusoidal waveshapes can be skewed forward or backward into ramp-like shapes, whilst shaping the pulse wave gives standard pulsewidth modulation.

Frequency modulation is available in both Linear and Exponential modes. The OSC1 also tracks to 1V/Octave over four octaves in its audible (HF) range, but can also be used as a low frequency oscillator in LF mode.

A Sync input allows for the OSC1 to be reset by an external signal. A rising edge will reset the sawtooth wave to its peak, from which it descends. The Inject input, meanwhile, allows for external signals to interfere with the sawtooth core. This allows for intermodulation-type effects to be produced, and opens new realms of chaotic oscillations.
Read more
 3 in stock $244.95
Click for better price!
quote 734840
Cat: 714523 Rel: 22 Jan 19
 
Expansion module for access to "Terminal" and "Grand Terminal's" deep functions - 10HP wide
Notes: Gateway is an expansion module for Endorphin.es Terminal. Via a set of CV-inputs you get more control over the envelopes of Terminal.

Gateway also gives you the possibility to use the Terminal-AD-envelopes as oscillators. Furthermore you get two separate Autotune-sections with which VCOs can be tuned automatically within a second (usually quicker).

With the VCF mode switches you can enable a 12 db VCF on the appropriate "Gate".

Gateway gets connected via two ribbon cables directly to the Terminal backside. In that case a connection to the system bus is not necessary.

However you can use Gateway also without Terminal, e.g. for its autotune feature. In that case you need to connect it to the system bus.
Read more
out of stock $220.34
Cat: 714521 Rel: 22 Jan 19
 
4 stereo channels performance mixer - 6HP wide
Notes: More than just a mixer - The Cockpit can not only be used to sum up mono and stereo signals with modular or line level, but as an effect insert for smartphones and tablets as well. Additionally, the module offers a ducking compressor plus sidechain input. Several Cockpits can be daisy-chained to form a large mixing setup. The audio paths feature a completely analog design to guarantee high-class sound.
Read more
out of stock $252.43
Cat: 688796 Rel: 11 Feb 19
 
MIDI to CV module featuring 4 channels of CV & Gate - 7HP
Notes: 1983 is a polyphonic MIDI to CV interface with creative voice allocation and automatic tuning capabilities. There are 4 channels of CV and GATE outputs that can be used in various layouts such as hybrid splits between monophonic and polyphonic voices or velocity, CC, aftertouch, triggers, clock or reset.

Each channel is able to LISTEN to the simple waveforms of the oscillators and with a single press of the TUNE button, it adjusts the CV outputs to the same tuning (such as A = 440 Hz in equal temperament or others). It also maps the response for all 7 octaves so all the oscillators are perfectly in tune with each other (and with other instruments). PURE MAGIC!

When the UPDATE jack is used, it forces the outputs to update only when a trigger is detected.

1983 always stores the notes played in a legato sequence in a buffer and the WINDOW jack allows for selecting which of these notes appear at the outputs.

This way the MIDI keyboard can be used as an input interface for harmonies and note sets that are further creatively processed with triggers and CV in the modular environment.

The TRANSPOSE jack shifts the outputs by semitones, fifths or octaves and the PORTAMENTO jack sets the glide time by CV.
Read more
 2 in stock $297.36
Cat: 736449 Rel: 15 Jul 19
 
Facilitates effects processing between eurorack, guitar pedals & electronic instruments
Notes: Want to connect outboard gear to your eurorack synthesizer without taking up valuable HP in your case? The INTRFX allows eurorack-level signals to be processed with pedals and/or outboard effects, and also allows line-level instruments to be processed with eurorack modules. Each of its three channels has an Interchange Switch to swap this mode, as well as an FX Blend parameter which can be controlled via CV. Because of its compact physical design, the INTRFX can be placed almost anywhere and connected to eurorack systems with 3.5mm patch cables rather than bulkier 1/4-in cables.

Feedback effects can be achieved by switching into the "wrong" mode, sending the FX return back into the FX send, while still allowing for dry signal blend and modulation. Channels can also be patched into one another and toggled between modes for experimental routing. Conveniently, each channel can operate as a reversed linear VCA for both audio and DC signals if no effects are used.

Whether you'd like to patch eurorack through some classic pedals or run a drum machine through your gnarliest modules, INTRFX makes these connections easy and flexible.
Read more
 7 in stock $202.17
Cat: 744064 Rel: 12 Sep 19
 
Digital wavetable oscillator - 16HP
Notes: Klang Stadt is the latest FC iteration of Electric Druid's VCDO digital wavetable oscillator. It features a number of advantages over the previous Waverider design:

- Improved PWM filtering
- Addition of Sub Two output
- Addition of Klang output
- Addition of Xmod feature
- Onboard LFO for riding the waves
Read more
 2 in stock $226.76
Click for better price!
quote 744064
Cat: 717551 Rel: 06 Feb 19
 
All-in-one Eurorack synth voice
Notes: Product is a full featured modular synthesiser which you can use without patching. Or you can use it as the heart of your modular system. Each component part is fully modular, but also features pre-patched normalised signal paths for fast set up of new and exciting sounds.

Product is a combination of three individual Frequency Central modules:

- XVCO TWO
- Raging Bull 3.0 VCF/VCA
- System X Envelope

Plus:

- Onboard LFO for PWM and FM
- Onboard noise source

Product features a motherboard on which all pots, switches and sockets are mounted, this is also where the pre-patched normalising happens. So the onboard LFO is available for both FM and PWM of the VCO. The three VCO waveforms are available at the three VCF signal inputs. 1V/oct input, LFO and ADSR are available at the three VCF signal inputs. By some cunning switching, the VCA can be operated by either ADSR or gate input, alternatively it can be set to drone position. Also available are signal outputs from the LFO and noise generator. All pre-patched connections can be broken simply by inserting a jack into the relevant socket.

To simplify the build process for DIYers, there are three daughterboards that plug into the Product motherboard: VCO daughterboard, VCF/VCA daughterboard, and ADSR/noise daughterboard. First you can build and calibrate the VCO daughterboard, plug it into the Product motherboard, get it running and have some fun with it. Then build the VCF/VCA daughterboard, and add it to you expanding modular synthesiser. Finally build the ADSR/noise daughterboard, and your synth is complete.
Read more
out of stock $287.74
Modor Comb Filter Module (synth module)
Cat: 700648 Rel: 18 Oct 18
 
14HP Eurorack digital filter
Notes: What is a Comb Filter? It is a digital filter where the input signal is mixed with a slightly delayed version of the input signal. You won't hear it as some kind of an echo, as this delay is very short (40ms at max). But the mixing process creates a number of equally spaced peaks and holes in the frequency spectrum, that make it look like the teeth of a comb. That's where the name 'Comb Filter' comes from.

Comb filters are typically used to make chorus and flanger style effects. These effects are created by modulating the delay time. With longer and relatively fast modulated delays you receive a chorus effect. With short to very short slowly modulated delays, combined with some feedback you'll get the typical sound of a flanger unit.

So, the most interesting parameter in this is the delay time. That determines the frequency spacing of the comb teeth. So that's why there's a CV control for it. The typical chorus and flanger effects are made by modulating the delay time with a triangle LFO. So there's a triangle LFO onboard the module, with speed control. If you don't enter any CV in the CV1 connector, it is normalled to this internal LFO to make typical effects. CV2 is normalled to the reverse signal of CV1, to make Modor's typical wide stereo effects, just as on the NF-1 synthesizer. But of course, you can enter your own CV signals in there: LFO's, Envelopes or some rhythmically undulating spacy voltage signals...

The centre big DELAY control sets the delay time, the DEPTH control sets the amount of CV modulation of the delay time. DEPTH can go positive and negative.

The MIX control sets the dry/wet mix. The FEEDBACK controls the amount of feedback. It can be set both positive and negative. The SPEED control sets the pace of the internal triangle LFO.
Read more
 2 in stock $231.04
Cat: 733645 Rel: 29 May 19
 
Complex oscillation module - 22HP
Notes: The Noisy Oscillator module is an oscillator that mixes two signals: a 'regular' wave (sawtooth/square/triangle) and a 'tonal noisy' wave. This adds a special noisy layer over the sound, that adds 'air', grit or dirt, depending on the combinations you make. The MOD parameter acts on the noisy waveforms:

- Sonar Noise: a white noise filtered by a resonant bandpass filter, with 1V/oct tracking of the filter frequency. The MOD parameter controls the resonance.
- Wind Noise: white noise filtered by a comb filter, with 1V/oct tracking of the base frequency (delay). The MOD parameter controls a 6dB/oct hipass filter.
- Arcade Noise: LFSR noise source as can be found on the SID soundchips (Commodore) or Sega Arcade games. The MOD parameter controls again a 6dB/oct hipass filter.

The noisy wave can be set equal, or 1 or 2 octaves above the regular wave.

The module has two voices, with their own set of CV and output connectors. This can be used to play in a full 2-voice polyphony, or in a 2-voice unison. The outputs can be separate, using both output connectors, or mixed, using only the connector of the second voice.

Next to the 1V/oct pitch CV, the module offers CV control over pitch (FM), the MOD parameter and the sound level:

- FM CV: pitch control normalled to 0V, attenuated with the FM knob (+ and -). This allows for Frequency Modulation up to the lower audio range. It's of course a digital module, so higher frequencies can start inducing aliasing and digital artefacts.
- MOD CV: CV control for the MOD parameter, normalled to 0V and attenuated with the CV AMT knob (+ and -).
- LEVEL CV: CV control for the sound volume, normalled to 7.5V. With this CV control you can omit an external VCA stage if you want.

The CV signals of the second voice (upper row of connectors) are always normalled to the signal of the first voice (lower row), so you can use a single LFO for some FM vibrato or tremolo on both voices, for example. Only the V/oct connector of the second voice is normalled to the first voice with an extra addition of a fixed voltage that can be set using a trimmer at the backside of the module. This way you can use the 2 voices to play in unison with a fixed pitch separation you can set on the backside.
Read more
 3 in stock $298.44
Cat: 731213 Rel: 08 May 19
 
Quad VC/Envelope - 10HP
Notes: The FLAME "X-4" is a compact multifunctional 4x Envelope/VCA module, which combines in a very small space (10HP) 4 AR envelopes and 4 separate VCAs.

The module complements quad VCOs (eg the FLAME "4VOX") to control 4 VCAs per envelope generator in a small space.

Each channel can be used separately as an AR envelope generator with VCA, or even as a VCA.

There are 3 modes:

AR: 4 CV controllable separate Attack/Release envelopes on 4 VCA channels (per gate)
AD: 4 CV controllable separate Attack/Decay envelopes on 4 VCA channels (one shot per trigger)
VCA: 4 CV controllable separate VCAs

There is available a three-level switch for three different envelope rates from extremely short to long.

The envelope shape is set with the sliders (also adjustable via CV inputs).

In addition, the envelope can be looped (gated AD envelope loop).
Read more
 2 in stock $202.17
Cat: 738272
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


- 3 x external audio out
- 1 x audio out
- 3 x cassation bass drum
- With clock
- Internal or external
- Trigger in
- Click out

The MULTI CASSA is an electronic Eurorack module for percussion sound and special FX. Created by LEP Laboratories, the MULTI CASSA module takes inspiration from the Leploop synth. MULTI CASSA is a combination of two modules with different pitch settings, the first maintains the original pitch, the second increases the pitch to recreate the sound off high tom or snare drum.

TRIG MIX: The rhythm played by the MULTI CASSA is the sum of the two trig IN1 and IN2. The trig mix pot adjusts the mix between the two trig input, which is great for creating polyrhythms.

FREQUENCY: Adjusts the pitch of the sound, also effects the resonance.

RESONANCE: Adjust the resonance, i.e. the damping time of the case. Beyond a certain level the MULTI CASSA can go into permanent oscillation. The level at which the oscillation begins varies with frequency.

DISTORTION: Adjusts the level of signal distortion.
Read more
 1 in stock $219.68
Items 1 to 50 of 58 on page 1 of 2
1  2  »

Filter

Saved Searches
Save current search
Release Date
Featured
Close