100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 19 of 19 on page 1 of 1
Cat: 746966 Rel: 12 Sep 19 • View all Synth modules
 
Great sounding VCO for Eurorack - 10HP
Notes: Here's the Roland 100M VCO adapted to Euro. The hard-to-find UA726 has been replaced with a CA3046 with no loss of performance. No hard to find parts whatsoever. The PCB also includes pads for SMD LM3046. It'a the golden age right here.

- A six position rotary switch for octaves gives plenty of range. The PITCH pot is fine tune
- Individual outputs for ramp, square and triangle - an improvement on the original
- Built in chip heater
- Onboard LFO! Yes that's right, an onboard LFO (thanks MC202) for introducing FM and/or PWM
Read more
out of stock $185.19
Cat: 745782 Rel: 09 Sep 19 • View all Synth modules
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step addressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analogue CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analogue outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be connected to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.
Read more
 1 in stock $170.63
Click for better price!
quote 745782
Cat: 745783 Rel: 09 Sep 19 • View all Synth modules
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step adressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analog CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analog outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be conneted to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.

The functions of the Start/Stop/Step/Reset buttons and inputs are the same as for the "old" control unit of the A-155:

A high level at the Start input or operating the Start button starts the sequence from the momentarily addressed step. Not working in "CV controlled step address" mode.

A high level at the Stop input or operating the Stop button stops the sequence (the last active step remains addressed). Not working in "CV controlled step address" mode.
Read more
 1 in stock $157.09
Cat: 739070 Rel: 12 Sep 19 • View all Record bags
 
High quality record bag holds 100 x 7" records with extra pockets
Notes: We created the Tucker & Bloom Sidekick 45 Bag for the working DJ. This functional, long-lasting bag houses everything you need without any of the clutter. The 45 Bag is the sized-down little brother of our popular DJ Rich Medina 45 Bag. Waterproof Ballistic Nylon withstands the bumps and scrapes along the way, and a vegetable-tanned leather carrying handle and ergonomic shearling shoulder strap make transport through an airport or to the club a cinch.

A velveteen-lined interior holds up to 100 seven-inch records, which are secured with our Takeout Top velcro flaps and nickel-cast brass hardware. Two side pockets hold spare needles and headphones, and a back slip pocket is the perfect size for a notebook. The front pocket was designed to hold cables, a recording device, or whatever else is jiggling around in your jeans. Slide business cards or adapters into an easy-to-access top pocket. Just like all Tucker & Bloom products, the 45 Bag includes our lifetime warranty. Bring all the essentials with you for your set and leave the rest at home with the Tucker & Bloom Sidekick 45 Bag.
Read more
 2 in stock $176.86
Click for better price!
quote 739070
Cat: 739069 Rel: 12 Sep 19 • View all Record bags
 
High quality record bag holds 100 x 7" records with extra pockets
Notes: We created the Tucker & Bloom Sidekick 45 Bag for the working DJ. This functional, long-lasting bag houses everything you need without any of the clutter. The 45 Bag is the sized-down little brother of our popular DJ Rich Medina 45 Bag. Waterproof Ballistic Nylon withstands the bumps and scrapes along the way, and a vegetable-tanned leather carrying handle and ergonomic shearling shoulder strap make transport through an airport or to the club a cinch.

A velveteen-lined interior holds up to 100 seven-inch records, which are secured with our Takeout Top velcro flaps and nickel-cast brass hardware. Two side pockets hold spare needles and headphones, and a back slip pocket is the perfect size for a notebook. The front pocket was designed to hold cables, a recording device, or whatever else is jiggling around in your jeans. Slide business cards or adapters into an easy-to-access top pocket. Just like all Tucker & Bloom products, the 45 Bag includes our lifetime warranty. Bring all the essentials with you for your set and leave the rest at home with the Tucker & Bloom Sidekick 45 Bag.
Read more
 2 in stock $164.38
Click for better price!
quote 739069
Polyend Anywhere Powerbank Module (power supply module)
Cat: 732313 Rel: 11 Sep 19 • View all Synth modules
 
Portable power source interface for Eurorack
Notes: Release your mind and release your modular system, with the Polyend Anywhere power compatibility Eurorack module. The Polyend Anywhere hooks up to any Power Bank battery to allow the user the liberty of portability with their modular system. Take your system for a walk! Smell the flowers, and use the inspiration to create the simultaneous feedback/AM/FM patch you've been dreaming of!
Read more
 5 in stock $172.70
Click for better price!
quote 732313
Cat: 744063 Rel: 12 Sep 19 • View all Synth modules
 
CEM3340 based VCO - 10HP
Notes: CEMosc is here, a stable AS3340 based VCO which tracks beautifully, and is feature rich. Easy to build and calibrate too.

CEMosc features:

- Onboard voltage regulation for tuning and tracking stability
- A rotary octave switch as well as a fine tune knob
- Both manual PW as well as PWM are available
- Linear and Exponential FM inputs, each with attenuators
- Both soft and hard sync
- Sawtooth, Triangle and Pulse outputs
Read more
 1 in stock $185.18
Click for better price!
quote 744063
Cat: 746891 Rel: 12 Sep 19 • View all Studio headphones
 
Professional, studio-quality headphones with wide frequency response
Notes: The RH-50 high-performance headphones are further evidence of Rane's unwavering dedication to both engineering excellence and ease of use. Recognizing that too many headphones designed for serious listening fall short of combining all the elements of great headphones into a single unit-full-range frequency response, ear pads that deliver hours of comfort, space-saving collapsible design and detachable cables with multiple jacks for use with virtually any gear-the RH-50 brings all these critical attributes together in one no-compromise unit. The result is a superb-sounding, comfortable, convenient unit that professionals and enthusiasts alike will depend on and enjoy, no matter how demanding the requirement.

The drivers are heavy-duty 40mm neodymium-powered units, which gives the RH-50 a particularly deep and potent bass response. When combined with their high-temperature/high-power voice coils, the overall effect is one of effortless authority, where every musical nuance is reproduced with detail and accuracy. The headphones are a collapsible design, making them easy to transport and the soft padded head band and ear pads stay comfortable during extended sessions.

In the box:

- RH-50 Headphones
- 39.4" (1m) straight detachable, locking 2.5mm (headphone end) to 3.5mm cable
- 55" (1.4m) coiled detachable, locking 2.5mm (headphone end) to 3.5mm cable
- 3.5mm to 1/4" TRS adapter
Read more
 2 in stock $155.02
Click for better price!
quote 746891
Blood On The Tracks (Ultradisc One Step Pressing) (limited hand-numbered 2xLP box set + insert)
Cat: UD 1S2006. Rel: 29 Aug 19
Rock
  1. Tangled Up In Blue (5:30)
  2. Simple Twist Of Fate (4:17)
  3. You're A Big Girl Now (4:29)
  4. Idiot Wind (7:49)
  5. You're Gonna Make Me Lonesome When You Go (2:55)
  6. Meet Me In The Morning (4:15)
  7. Lily, Rosemary & The Jack Of Hearts (8:50)
  8. If You See Her, Say Hello (4:46)
  9. Shelter From The Storm (4:58)
  10. Buckets Of Rain (3:23)
 in stock $151.89
Cat: 742281 Rel: 08 Aug 19 • View all DJ cartridges
 
AT-XP7 cartridge pre-mounted on the AT-HS6BK headshell
Notes: The AT-XP series cartridges provide a high-quality sound for vinyl DJ's. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

- Audiophile DJ cartridge AT-XP7 pre-mounted on the AT-HS6BK headshell
- VM dual magnet construction
- Durable robust design for high-quality specialist DJ playback
- Tapered aluminium cantilever providing outstanding rigidity
- Compatible with the replacement styli ATN-XP3 and ATN-XP5 as well
- Configuration with single cartridge (AT-XP7). The replacement stylus (ATN-XP7) and a headshell bundle, consisting of the replacement stylus and the headshell AT-HS6BK (AT-XP7/H) are available separately
Read more
 3 in stock $165.43
Click for better price!
quote 742281
VARIOUS
Ann Arbor Blues Festival 1969 Vol 1 & 2 (50th Anniversary Edition) (mono) (limited gatefold 180 gram coloured vinyl 4xLP box set + book + booket + news articles)
Cat: 813547 027764. Rel: 23 Aug 19
50s/60s
  1. Roosevelt Sykes - "Dirty Mother For You" (4:52)
  2. Arthur "Big Boy" Crudup - "So Glad You're Mine" (3:46)
  3. JB Hutto & His Hawks - "Too Much Alcohol" (3:49)
  4. Jimmy "Fast Fingers" Dawkin - "I Wonder Why" (3:19)
  5. Junior Wells - "Help Me (A Tribute To Sonny Boy Williamson)" (6:33)
  6. BB King With Sonny Freeman & The Unusuals - "I've Got A Mind To Give Up Living" (5:51)
  7. Mississippi Fred McDowell - "John Henry" (4:40)
  8. Pinetop Perkin - "Pinetop's Boogie Woogie" (3:15)
  9. Big Bill Hill - "Introduction" (0:38)
  10. Luther Allison & The Blue Nebulae - "Everybody Must Suffer/Stone Crazy" (14:48)
  11. Clifton Chenier - "Tu M'as Promis L'amour (You Promised Me Love)" (3:59)
  12. The Original Howlin' Wolf & His Orchestra - "Hard Luck" (16:54)
  13. Otis Rush - "So Many Roads, So Many Trains" (4:32)
  14. Muddy Waters - "Long Distance Call" (7:32)
  15. Charlie Musselwhite - "Movin' And Groovin'" (6:16)
  16. Magic Sam - "I Feel So Good (I Wanna Boogie)" (4:59)
  17. Shirley Griffith - "Jelly Jelly Blues" (3:11)
  18. Big Mojo Elem - "Mojo Boogie" (5:11)
  19. T-Bone Walker - "Call It Stormy Monday (But Tuesday Is Just As Bad)" (8:42)
  20. Big Bill Hill - "Announcements" (1:55)
  21. Big Mama Thornton & The Hound Doggers - "Ball & Chain" (6:13)
  22. Big Joe Williams - "Juanita" (2:01)
  23. Sam Lay - "Key To The Highway" (5:41)
  24. Lightnin' Hopkins - "Mojo Hand" (5:02)
  25. James Cotton Blues Band - "Off The Wall" (13:55)
  26. Son House - "Death Letter Blues" (7:51)
out of stock $165.42
Cat: 739136 Rel: 16 Jul 19 • View all Synth modules
 
Random looping sequencer - silver faceplate, 6HP
Notes: Permutation is a set of random sequencers that use a digital shift register to generate unpredictable CV and gate patterns that can be locked into repeating loops. The concept is based on the Turing Machine, an open source module designed by Tom Whitwell.

Permutation retains the core functionality of the Turing Machine while adding new features such as dedicated outputs for each bit of the shift register, CV inputs for all parameters, and an internal bipolar VCA. Locked sequences are also saved across power cycles.
Read more
out of stock $194.55
Cat: 742798 Rel: 01 Jan 90 • View all Portable & USB turntables
 
***B-STOCK: Box opened, product unused***
Notes: The ultimate portable turntable.

Reloop SPIN is a portable turntable that guarantees mobile fun anywhere you want! The turntable comes with everything you need out of the box and is especially optimized for scratching and cutting.

Bluetooth streaming of your music:

The Bluetooth Audio Streaming technology allows wireless streaming of music or beats via SPIN - this way the turntable becomes a speaker for your smartphone.

Direct USB recording:

Via the USB recording function it is possible to record your scratches and cuts in MP3 format directly to an USB stick. This interface can also be used for digitizing records.

Includes 7" scratch vinyl:

SPIN comes with a 7'' slipmat and an exclusive 7" scratch vinyl containing specially mastered scratch samples and beats for beginners and experienced scratch artists alike.

Flexible power options:

Enjoy your records on the road: SPIN is extremely portable, not only due to its shape and small form factor, but also thanks to its flexible power options. It can be used with a regular USB power supply unit (5 V, 2 A), USB power bank or rechargeable batteries. The batteries can be inserted in the compartment on the bottom and are sold separately. A power LED keeps you informed about the turntable's operational status. The dust cover protects the turntable and thanks to the handle, SPIN can be carried like a suitcase. Skip-proof rubber feet guarantee stability.

Outstanding for mobile scratching and cutting:

Via the switch on the turntable's top panel you can select between 3 speeds (33 1/3, 45 & 78 rpm) which covers all available speeds. The straight tone arm offers enhanced stability and can be fixed into position with a transportation lock. The pre-installed cartridge has excellent tracking features and holds the groove tightly, even when carrying out fast scratches.

45-mm Crossfader pre-installed:

The precise 45-mm crossfader has a unique form factor and thanks to the two-rail technology it is especially sturdy. Moreover, it is possible to install the crossfader on either side of the platter - simply select your preferred position.

Extensive controls & adjustment possibilities:

On the top panel you can find a start/stop button as well as a pitch control with a range of +/-20 % for precise setting. A tone control can be used to adapt the sound of the lows to your requirements. Volume for the AUX input and master/headphones output can be adjusted via two separate controls. There is also a 7'' adapter for records with a large centre hole.

Reloop SPIN - Connect through vinyl:

Through the combination of turntable and mixer as well as the high connectivity, SPIN is ideal for vinyl lovers as well as scratch artists and aspiring DJs.

- Inputs: AUX 3.5 mm stereo, Bluetooth audio
- Outputs: master RCA, USB (USB-A), headphones 3.5/6.3 mm stereo
- Dimensions: 370 x 95 x 260 mm
- Weight: 1.61 kg
Read more
 1 in stock $175.83
Cat: 739891 Rel: 30 Aug 19 • View all Synth modules
 
Intuitive pitch CV sequencer in 4HP
Notes: Ultra-simple 16-step Eurorack CV sequencer with randomisation option and storage for up to 16 patterns. Straight to the point business, all in just 4HP of rack space.

Supplier notes:
Small, easy-to-program sequencers are a bit of a rarity. Vox Digitalis is our answer to this issue. With intuitive displays and simple controls, VD is perfect for all your pitch CV needs. Set your sequence length, dial in each note, randomize, save and load 16 sequences -- VD does all the stuff the big sequencers do, just in 4HP.
Read more
 1 in stock $169.58
Click for better price!
quote 739891
NUX PA50 Personal Monitor Guitar Amplifier (monitor/guitar amplifier)
NUX
Cat: 735361 Rel: 15 Jul 19 • View all Guitar amplifiers
 
Personal monitoring amplifier featuring 2 separate input channels with different EQ response
Notes: The NuX PA-50 personal monitoring amplifier has a flat frequency response and is equipped with a full range 2-way speaker set. 2 independent channels each have a different EQ response. Channel 1 is improved for dynamic sound and designed to enhance low and high frequencies. Channel 2 has a flat response which does not colour the tone of the input source. Use with a processor or IR loader, such as NUX Solid Studio to give the true sound your favourite guitar amplifier(s) without carrying the whole rig. And use the 3-band EQ and you can fine-tune your output to get a perfect result.
Read more
 2 in stock $160.21
Click for better price!
quote 735361
Cat: 744597 Rel: 27 Aug 19 • View all Synth modules
 
6HP power supply for guitar pedals, plus two small signal splitters
Notes: Stoker Elektrek is equipped with a 2.1 mm hollow connector to supply power to effect pedals. A short adapter cable is included. The module itself draws power from the modular PSU. A look at the other technical data reveals that Stoker Elektrek is compatible with many effect pedals:

- 9V DC power supply
- Up to 750 mA
- Polarity: peak = negative / ring = positive

On top of that, Stoker Elektrek offers two mini multiples, each with one signal input and two outputs, which can also be used as a large splitter.
Read more
 1 in stock $183.10
Click for better price!
quote 744597
Cat: 739135 Rel: 16 Jul 19 • View all Synth modules
 
Random looping sequencer - black faceplate, 6HP
Notes: Permutation is a set of random sequencers that use a digital shift register to generate unpredictable CV and gate patterns that can be locked into repeating loops. The concept is based on the Turing Machine, an open source module designed by Tom Whitwell.

Permutation retains the core functionality of the Turing Machine while adding new features such as dedicated outputs for each bit of the shift register, CV inputs for all parameters, and an internal bipolar VCA. Locked sequences are also saved across power cycles.
Read more
out of stock $194.55
Cat: 728707 Rel: 24 Jul 19 • View all Synth modules
 
Ring modulator based on the ARP 2600's 4014 ring mod - 8HP
Notes: Mobula is Delta Sound Labs' faithful take on the classic ARP 2600 ring modulator model 4014. This particular processor is renowned the world over for its clean sounding ring modulation effect. Due to its unconventional circuit design, where the positive and negative parts of the signal split between two two-quadrant multipliers, it achieves what is referred to as a four quadrant multiplication.

Built with a combination of modern closely matched and discrete transistors this super skiff friendly module is faithful to all of the original features, with the single addition of independent switching of input signal DC-blocking. This module is DC-coupled; meaning it will happily process both control voltages and audio signals at the flick of a switch. The unique electronic architecture leads to both significantly increased low frequency response and superior carrier suppression when compared to traditional transformer based ring modulation designs.
Read more
 2 in stock $155.01
Click for better price!
quote 728707
Cat: 744610 Rel: 06 Sep 19 • View all Synth modules
 
Eurorack receiver for the Wave sensor that allows Wave to connect to modular synthesisers - 4HP
Notes: The Wavefront module is the Eurorack receiver for Wave that allows Wave to connect to modular synthesizers. With Wavefront you can completely bypass the computer and bring unprecedented sound control, effect shaping and manipulation to modular setups.

Use subtle gestures to add vibrato to your favourite lead synth module, or use more visible gestures while performing.

The buttons are great for triggering sequences while the tap lets you interact with percussive modules in a completely new way. Drumming on a table has never been as fun!

To use Wavefront you need one Wave (ring) per module.
Read more
 1 in stock $187.26
Click for better price!
quote 744610
Items 1 to 19 of 19 on page 1 of 1

Filter

Saved Searches
Save current search
Release Date
Featured
Close