100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 16 of 16 on page 1 of 1
Cat: 588824 Rel: 02 Oct 15 • View all Synth modules
 
2 pole multi-mode filter synthesiser module - 4HP wide
Notes: MMF is a 2 pole Multi-Mode Filter in 4 HP. It has simultaneous LowPass, BandPass and HighPass filter outputs.

MMF will self oscillate into a nice sine wave and track 1V/octave. The Resonance is voltage controllable.

The PING input is for a gate or trigger, and generates a fast decay envelope with a nice sound, reminiscent of a vactrol filter, but without the vactrol. PING can normal to the FM jack, or go direct (switchable behind the panel).

The FM input is connected to an attenuverter pot to give you control over the signal.

Power Draw: +62mA, -24mA. 4HP Width. 25mm Depth.
Read more
out of stock $164.40
WMD Pro Output Module (synth module)
Cat: 580282 Rel: 30 Jul 15 • View all Synth modules
 
Pro Output synth module with Low Distortion / Low Noise & High Headroom - 6HP wide
Notes: The WMD Pro Output is a simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear. It also includes a very high quality headphone driver.

Rail to rail opamps at the input stage allow for headroom above the typical eurorack levels of 20Vpp. The Pro Output can handle 23Vpp before clipping. Signals are attenuated down to the proper levels allowing for simple adjustment free connection to any type of device, professional or consumer.

The Pro Output is DC coupled through the entire signal path, including the headphone driver. This design eliminates coupling capacitors and the distortion they can cause.

Controls and I/O:

Input - The inputs are designed to accept any normal modular level. 10Vpp is the nominal operation level. The left input is normaled to the right side for mono operation. Inputs will clip at 23Vpp, giving enough headroom for any eurorack signal.

Phones/Line - The headphone driver connects to a 3.5mm stereo jack, and a 1/4" jack for whatever type of headphones you use. It can drive both simultaneously.

The headphone output level is internally limited to protect against accidental knob turns. Connect a couple of jumpers to the rear of the module to disable this limiting. This will allow the headphone amp to drive headphones extremely loudly, but still without distortion. Output quality remains the same regardless of the jumper settings.

With the limiting enabled (jumpers off), the maximum output is around -10dBV. With limiting disabled (jumpers on), the maximum output increases to pro level, about +4dBu.

Stereo - The Stereo (-10dBV) output is designed to interface directly with consumer level gear. Hook directly to sound cards, portable recorders, and speakers. It can be used as a second headphone output but will be loud.

+4dBu Bal - These two outputs (left and right) are high quality low impedance balanced line drivers. They are designed to drive long cables and to drive balanced transformer or transformerless inputs. Use these to connect directly to mixing consoles, mic preamps, or any other piece of professional outboard gear.
Read more
 1 in stock $194.58
Click for better price!
quote 580282
WMD/SSF Ultrafold Module (synth module)
Cat: 588817 Rel: 02 Oct 15 • View all Synth modules
 
Voltage controlled wave folder synthesiser module - 6HP wide
Notes: ULTRAFOLD is a powerful voltage controlled wave folder.

The input drive and wave fold controls make up the heart of the design, providing warm saturation and additive harmonics to the input signal.

The wave shift control offsets the input signal to allow for asymmetrical folding - unveiling the subtleties in the distribution of spectral content.

The novel bipolar feedback control takes wave folding to a new level by returning the folded output to the input, thereby skewing the wave shapes for dramatic changes to the upper harmonics.

An auxiliary feedback input is provided to allow for insane folded FM sounds when another oscillator drives this input.

Power Draw: +30mA, -30mA. 6HP width. 25mm Depth.
Read more
out of stock $174.81
WMD/SSF ADSR VCA Module (synth module)
Cat: 588820 Rel: 02 Oct 15 • View all Synth modules
 
Multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA) synthesiser module - 6HP wide
Notes: ADSRVCA is a multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA).

This envelope generator is capable of producing a classic, gate driven Attack/Decay/Sustain/Release (ADSR) envelope as well as a self sustaining, looping Attack Decay (AD) and Attack Decay Release (ADR) one shot envelopes.

The integrated VCA eliminates the need for an external VCA module and can be used independently when an external control voltage is utilized.

The envelope controls the shape of the VCA’s amplitude response by default.

Power Draw: +36mA, -16mA. 6HP width. 25mm Depth.
Read more
 1 in stock $164.40
Click for better price!
quote 588820
Cat: 696393 Rel: 06 Aug 18 • View all Synth modules
 
Dual channel digitally controlled VCA - 4HP
Notes: The DVCA is a redux of the classic WMD Digital VCA module, giving it more features while reducing its size and power consumption.

Channel A is now unipolar/bipolar switchable, allowing for use as a bipolar VCA.

With control parameters for bias and CV, users can create classic ring modulation and attenuversion effects. Channel B still has the character and features of the Digital VCA.
Read more
out of stock $185.21
Cat: 580274 Rel: 30 Jul 15 • View all Synth modules
 
Multimode envelope synth module - 8HP wide
Notes: The WMD Multimode Envelope is our take on the classic ADSR. It offers expanded controls, multiple logic modes, and voltage control with the expansion module. This is the most powerful envelope ever designed for eurorack.
Read more
out of stock $191.46
Cat: 580278 Rel: 30 Jul 15 • View all Synth modules
 
Multimode Voltage Controlled Amplifier (VCA) synth module with two factory-trimmed OTA VCAs - 10HP wide
Notes: The WMD Multimode VCA is designed to be the most versatile amplifier in your modular. Period.

The MMVCA is capable of a number of useful configurations utilizing both VCAs, or as two seperate amplifiers. It has plenty of headroom in "clean" mode or can be easily overdriven with the soft saturation circuit. You'll want to run everything through the MMVCA.
Read more
out of stock $191.46
Cat: 580284 Rel: 30 Jul 15 • View all Synth modules
 
Filter synth module with Four 4-pole filters & switched capacitor design
Notes: The WMD Quad Anti Aliasing Filter (QAAF) was conceptualized as the first epansion for the Phase Displacement Oscillator. It is designed to eliminate aliasing and stair-step distortion from the Digital to Analog converters. We opted to make this a seperate module because it is useful by itself as well as coupled with the PDO.

There are four independent filters inside the QAAF. Each -24dB/octave Butterworth filter runs at exactly the same frequency. The Butterworth filter has a small amount of resonance and a great sound. Each input jack is normaled from the expansion header that connects to the PDO, but any signal can be filtered by plugging in.

The frequency control circuitry uses a vactrol to control the clocking speed of each filter, slowing down the response to transient signals. This brings life and character to the sound.

Controls and I/O:

CV Input - This input is roughly calibrated to 1v/octave. It drives a vactrol that will cause the QAAF to open quickly and close slowly.

Freq Knob - This knob controls the cutoff directly or acts as a bias/level shift control for the CV input.

CLK - This jack serves as a clock input or output, directly controlling the filter's frequencies at a ratio of 100:1. A jumper on the back (lower jumper) selects it's mode. Jump for clock output, leave open for clock input.

Inputs 1-4 - Audio Inputs, these are normaled from the expansion header going to the PDO. This normal is broken by plugging into these jacks.

Outputs 1-4 - These jacks are for each channel's outut.

Mix - This output is a sum of each channel's filtered input.

Frequency Limit Jumper - This rear jumper (upper set of pins) will limit the low frequency cutoff to about 300Hz. This will stop the QAAF from producing aliasing noise itself as it's clock frequency will be limited to 30kHz. Jump for limiting, leave open to disable.
Read more
out of stock $191.46
Cat: 640973 Rel: 27 Feb 17 • View all Synth modules
 
Tempo-syncable modulation source module - 6HP
Notes: The Modbox is a tempo syncable modulation source with a three-phase LFO, CV Skewable LFO, Sample and Hold, and White Noise generator.

LFO 1 is a three-phase LFO with independent outputs for each phase which are set at 0, 120, and 240 degrees. Shape can be switched between Sine, Triangle, and Saw with a push of a button.

LFO 2 is a Skewable LFO with three shapes. The LFO shape can be smoothly changed from a Ramp through Triangle to Saw wave shapes. The skew shape can be changed with the Skew knob or with CV

The Sample and Hold circuit's clock is normalled to the 2nd LFO but can be clocked externally as well. The sample and hold samples voltage from and internal white noise source. There is also an input for an external sample source. White noise has its own output as well for use with other modules and applications.

Both LFOs can be sync'd to an external clock source by holding the wave shape button for different lengths of time. As they are independent of each other, one can be sync'd while the other runs free like a gazelle on an African plain.

Tempo sync calculates the time between incoming clocks and reacts instantly to each new clock pulse. Each rate knob becomes a multiplier/divider when sync is engaged.
Read more
out of stock $195.63
Cat: 588814 Rel: 02 Oct 15 • View all Synth modules
 
4-pole (24dB/octave) low pass Voltage Controlled Filter (VCF) synthesiser module - 6HP wide
Notes: POLE-ZERO is a 4-pole (24dB/octave) low pass Voltage Controlled Filter (VCF) utilizing MOSFET transistors. MOSFETs are known for their soft, vacuum tube like distortion when overdriven.

POLE-ZERO is designed to exploit these characteristics with the addition of a MOSFET saturation control and provide a much wider palette of sounds when compared to a standard VCF.

A Voltage Controlled Amplier (VCA) is also a relatively novel addition and provides a simple way to amplitude modulate the filter without the need of an external VCA.

Power Draw: +20mA, -20mA. 6HP width. 25mm Depth.
Read more
out of stock $167.52
Cat: 588815 Rel: 02 Oct 15 • View all Synth modules
 
Function generator and voltage controlled slew limiter synthesiser module - 8HP wide
Notes: MINI SLEW is a feature packed function generator and voltage controlled slew limiter.

Transient functions are generated using the rise, fall and shape controls.

Complex functions can be generated using the voltage controlled shape and vari-out via direct CV inputs.

MINI SLEW features a novel time compensation mode which permits the timing of the transient to remain relatively constant while the shape parameter is adjusted.

CV SUM mode permits a single CV patched into rise or fall to process both parameters or two CVs patched into rise and fall to be summed and applied to both parameters.

Additional features include VC cycle (toggle on/off), end of rise and end of fall outputs, FM input and an LED voltmeter for monitoring the amplitude of the direct positive output.

Power Draw: +70mA, -50mA. 8HP width. 25mm Depth.
Read more
out of stock $165.19
Cat: 588826 Rel: 02 Oct 15 • View all Synth modules
 
Delay synthesiser module - 4HP wide
Notes: DPLR is a delay module with two interactive delay lines, each with 750mS of delay time.

One input is split to two delays which share overall delay time (DELAY) and regeneration (REGEN). Side B has control over its delay offset (SPREAD) from side A.

Delay, Spread and Regen are all voltage controllable. Regen at max will echo indefinitely, and can create interesting noise swashes.

The pushbutton at the top taps through seven different crosstalk configurations (Regen isolated through ping-pong). Push and hold to change through four different Regen Filter settings from very bright to dark.
Read more
 3 in stock $161.28
Click for better price!
quote 588826
Cat: 731606 • View all Effects pedals
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The Geiger Counter - Civilian Issue is 32 killer sounds from the original Geiger Counter. WMD stripped off the majority of the controls and took $100 off the price. This is for those players who want to dial in a tone quickly and save pedalboard space.

The Controls:

Stomp Switch - Like all WMD pedals, the GCCI (Geiger Counter Civilian Issue) is handwired and true bypass, so it won't affect your tone when disabled. When the GCCI is on, the red LED will be lit.

Gain - The gain control provides anywhere from a nice clean tone to a ton of overdrive. Use this to hit the Function tables harder or softer to produce different amounts of harmonics.

Tone - The tone control can be used to fine tune the harmonic content from the Function tables. Use lower settings for fewer upper level harmonics.

Function - Twisting this knob will cause the number on the display to change. It goes 0 to 9 and A to F. This selects the 16 presets inside the GCCI. Push the knob in to activate the Low Fidelity mode for each preset. Low Fidelity mode is indicated by the decimal point on the display.

Each Function recalls parameters from the original Geiger Counter including the Bit Depth, Sample Rate and the Wave Table. The wave tables are displayed in the manual file. As your guitar string swings up and down, the wave table is played left to right from the centre. The output is what's vertically on the graph. The more movement in the Function, the more harmonic content you'll get out.

Volume - Sets the output volume of the GCCI which can be up to 5Vpp, enough to really crush your amp's input stage.
Read more
 1 in stock $166.49
Cat: 698455 Rel: 21 Aug 18 • View all Effects pedals
 
Compact parametric equalizer in stomp box format
Notes: The Utility Parametric EQ is a staple pedal that belongs in any professional's rig. There are 3 bands of EQ with frequency ranges from about 40Hz to 15kHz. Each band is an independent bandpass filter with adjustable centre frequency, quality factor, and gain. Use them to sculpt and shape your tone however you like.

The Controls:

There are 3 bands of EQ with frequency ranges from about 40Hz to 15kHz. Each band is an independent bandpass filter with adjustable centre frequency, quality factor, and gain. Use them to sculpt and shape your tone however you like.

Stomp Switch - This footswitch activates the EQ. The centre LED will be lit when the pedal is engaged.

Freq - This selects the centre frequency of the filter. The three frequency ranges are: 31Hz to 1.6kHz, 100Hz to 4.8kHz, 300Hz to 16kHz.

Q - The Quality Factor (Q) gives you control over the sharpness of the filter. Turn it up and the filter section becomes resonant and more abrasive. Low Q settings sound like a traditional EQ, higher Q adds resonant nodes. The Q ranges from about .1 to around 30.

Level - This controls how much cut or boost you have from the band. Centre it (0) and the band is out of the circuit. Turn clockwise and you'll get more of that frequency, turn counter-clockwise and you'll hear less. If all 3 controls are at 0, you should be able to click the pedal on and off and not hear any difference.

Overall Level - This gives an overall cut or boost at the output of the Parametric EQ. Like a volume control, but with some gain available.
Read more
out of stock $186.25
Cat: 698451 Rel: 30 Aug 18 • View all Effects pedals
 
Stripped down version of the Geiger Counter digital distortion pedal
Notes: The Geiger Counter - Civilian Issue is 32 killer sounds from the original Geiger Counter. WMD stripped off the majority of the controls and took $100 off the price. This is for those players who want to dial in a tone quickly and save pedalboard space.

The Controls:

Stomp Switch - Like all WMD pedals, the GCCI (Geiger Counter Civilian Issue) is handwired and true bypass, so it won't affect your tone when disabled. When the GCCI is on, the red LED will be lit.

Gain - The gain control provides anywhere from a nice clean tone to a ton of overdrive. Use this to hit the Function tables harder or softer to produce different amounts of harmonics.

Tone - The tone control can be used to fine tune the harmonic content from the Function tables. Use lower settings for fewer upper level harmonics.

Function - Twisting this knob will cause the number on the display to change. It goes 0 to 9 and A to F. This selects the 16 presets inside the GCCI. Push the knob in to activate the Low Fidelity mode for each preset. Low Fidelity mode is indicated by the decimal point on the display.

Each Function recalls parameters from the original Geiger Counter including the Bit Depth, Sample Rate and the Wave Table. The wave tables are displayed in the manual file. As your guitar string swings up and down, the wave table is played left to right from the centre. The output is what's vertically on the graph. The more movement in the Function, the more harmonic content you'll get out.

Volume - Sets the output volume of the GCCI which can be up to 5Vpp, enough to really crush your amp's input stage.
Read more
 2 in stock $186.25
Click for better price!
quote 698451
Cat: 708981 Rel: 16 Nov 18 • View all Synth modules
 
Precise voltage source & offset generator in only 4 HP
Notes: The VOLT is a precision voltage source and offset generator for Eurorack modular synthesizers.

With its 14V range (-7V to +7V), VOLT can be used to calibrate oscillators, filter tracking, or anything that needs a 1V/Oct calibration.

VOLT has two buttons. Push the top to increase the voltage by one volt. Push the bottom button to decrease the voltage by one volt. Push both buttons at once to reset the voltage back to a known value.

VOLT has 3 voltage inputs and 3 voltage outputs. The input signal is summed with the voltage source, generating offsets of 1V or 1 octave at a time. This means it can be used as a precision octave switch for oscillators that lack the functionality. Create variation in your sequences with a quick touch of a button.

VOLT's octave buttons can also be switched via external gates, essentially making it an octave sequencer. One input causes it to go up, and the other causes it to go down. Two gates at once will reset the voltage back to your set value. Running basslines and melodies through volt to be sequenced up and down by octaves is a very effective and a fun way to work.
Read more
out of stock $159.20
Items 1 to 16 of 16 on page 1 of 1

Filter

Saved Searches
Save current search
Release Date
Featured
Close