100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 4,529 on page 1 of 91
1  2  3  ...  91  »
Cat: 728570 Rel: 16 Jul 19 • View all Synth modules
 
26HP Eurorack spectral re-synthesiser module
Notes: Rossum Electro-Music Software Architect Bob Bliss (who also, as it happens, fathered E-mu's famed "EOS" Emulator Operating System) has created Panharmonium, a unique music and sound design tool that analyses the spectral content of any audio signal and uses that analysis to drive a bank of from 1 to 33 oscillators. Depending on various control settings, Panharmonium can accurately reproduce the input spectrum in real time or modify it in a multitude of wildly creative ways. All with an interface whose immediacy encourages performance and interaction.

Panharmonium input can be anything from a single oscillator to an entire mix (including vocals). From dense, swirling pads and drones that evolve with the input's changing spectrum, to clock-syncable spectral arpeggiation, to as-yet unnamed harmonic effects, Panharmonium opens up an entirely new world of sonic possibilities.

Additionally, Panharmonium can take a snapshot of an instantaneous spectrum and use that as a complex harmonic oscillator, which can then be modified and modulated by all of Panharmonium's other controls.

Panharmonium accomplishes its magic though a combination of functional submodules:

Spectral Analyser:

The Spectral Analyser provides tools for defining the analysis process.

- The Slice parameter sets the rate at which the incoming audio is transformed to spectral data. It can be set by the Slice and Multiplier controls, the Tap button, or by an external clock signal. Very short slice times result in real-time spectral data, while longer times can create rhythmic spectral patterns.
- The Centre Freq and Bandwidth controls (and associated CV inputs and attenuverters) control the range of frequencies to be analysed. The Bandwidth control allows the selection of narrow to wide pass bands on the left side of the pot and narrow to wide notches on the right side of the pot. The ability to sweep the frequency and modify the bandwidth under CV control opens up a wide range of sonic effects.
- The Freeze button lets you freeze the spectral integrator, sustaining the currently analysed spectrum.

Spectral Modifiers:

These controls allow you to creatively modify the analysed spectra.

- The Voice parameter lets you select from 1 to 33 oscillators to resynthesise the spectrum.
- The Blur parameter (and associated CV input) is a spectral lag processor that controls how quickly the spectrum can change.
- The Feedback control (and associated CV input) lets you route the re-synthesised audio back into the entire processing chain for subtle or dramatic feedback effects. At its max, the output becomes self-sustaining, even if the input is removed.

Oscillator Bank:

The Oscillator Bank resynthesises the analysed spectra.

- The Waveform parameter selects the oscillators' waveform. In addition to the usual sine, triangle, sawtooth and pulse waveforms, two special crossfading sine and sawtooth waveforms are included.
- The Freq control lets you tune the oscillators over a +/-7 semitone range. The frequency is further controlled by the 1V/Oct input and the FM input and attenuverter.
- The Octave control, not surprisingly, shifts the pitch of the output by octaves.
- The Glide parameter sets the amount of polyphonic glide (i.e., each oscillator has its own glide circuit).
- The Mix control (and associated CV input) sets the balance between the original input audio and the resynthesised audio.

Optional Functions:

A number of optional functions can be selected by using the Output Mode and Tap buttons.

- Holding the Output Mode button and adjusting the Slice control enables Drums Mode, which optimizes the spectral analysis for drums and other percussive inputs.
- Holding the Output Mode button and adjusting the Centre Freq control allows you to instead set the lower frequency of the analysis range.
- Holding the Output Mode button and adjusting the Freq control enables Spectral Warping. In contrast to conventional frequency adjustment, where the harmonic relationships between the spectral elements are preserved, Spectral Warping shifts the harmonic elements individually, producing a variety of clangourous, swarming textures.
- Holding the Tap button and adjusting the Freq control quantizes the resulting frequency adjustments to semitones.

Spectra Memories and Presets:

Panharmonium provides 12 user Spectra memories and 12 user Presets (in addition to 12 each factory memories).

- The Spectra memories let you store up to 12 frozen slices. When selected, a spectrum (up to 33 oscillators wide!) replaces any live input and can have its pitch controlled by the 1V/Oct input and FM controls.
- A Preset is a snapshot of all of the module settings, along with the value of any CVs present at the moment the preset is saved.

Panharmonium is 26HP wide and 25mm deep.
Power requirements (max): 140mA +12V, 30mA -12V. Reverse polarity protected.
Read more
 5 in stock $498.03
Click for better price!
quote 728570
Notes: Mukatsuku high quality professional stainless steel cut away dome shape 45 adapter with easy lift off design and revised tight fit to keep the scratch DJ's happy! 117 grams. Height 27.5mm.

Tip: Use WD40 (to clean and maintain your adapter). Regularly spray the adapter leaving for 40 minutes, and then polish using a clean cloth.
Read more
 3 in stock $28.12
Cat: 733238 Rel: 18 Jul 19 • View all Synth modules
 
Eight channel audio & CV sampler for Eurorack - 21HP
Notes: The 'Squid Salmpler' is a Eurorack 8 channel audio & CV sampler. It is designed for immediate real time sampling, editing and mangling within a modular context.

Taking influence from early hardware samplers, The Squid Salmple focuses on usability and instinctive operation, incorporating a proven Pamela's Workout style user interface for minimal screen dependence and a fun, hands on experience.

With support for sampling and playback for both audio and CV, as well as CV control of all parameters, on-the-fly bank loading and saving to USB, The Squid Salmple brings a unique take on old school sampling into the modular realm.

The Squid Salmple comes with a USB Stick containing approximately 90 banks of original carefully curated royalty free samples. This includes a wide range of sounds from classic drum machines and weird synths to field recordings and CV modulations. Banks are provided by both ALM and some of our favourite artists and friends including Mumdance, Solid Blake, Russell Haswell, Lauren Flax, Dave Burraston (NYZ), Sue Zuki, Dungeon Acid, Sasha Lewis and Andrew Duff.
Read more
 More than 10 in stock $414.67
Click for better price!
quote 733238
Cat: 739040 Rel: 15 Jul 19 • View all Portable speakers
 
Portable pocket-sized speaker
Notes: Pair your Bluetooth devices to this speaker disguised as a retro cassette tape. Connect wirelessly to your phone wherever you are. Charges up in just one hour for 8 hours of play time. USB charging cable and coloured stickers included.
Read more
 4 in stock $20.83
Cat: 720246 Rel: 15 Jul 19 • View all MIDI keyboards
 
4-octave touch sensitive MIDI keyboard controller
Notes: K-Board Pro 4 is a four-octave MIDI keyboard controller with multiple dimensions of touch sensitivity in each key. K-Board Pro 4 is MPE compatible, sending attack velocity, release velocity, continuous pressure, horizontal position, and vertical position data to offer the deepest level of expressive playing.

Under each key of K-Board Pro 4 is KMI’s patented Smart Sensor Fabric technology that is at the core of all our MIDI control surfaces. Resilient silicone keys and no moving parts ensure our trademark durability.

K-Board Pro 4 is USB powered and class compliant to ensure both portability and compatibility with MacOS, Windows, iOS, Android, as well as MIDI capable hardware.
Read more
 1 in stock $832.49
Click for better price!
quote 720246
Cat: 725978 Rel: 15 Jul 19 • View all Synth module accessories
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 1 in stock $15.62
Cat: 731235 Rel: 15 Jul 19 • View all Audio patchbays
 
Adds routing flexibility to signal chains of guitar pedal effects, electronic instruments & other audio devices
Notes: Are you playing with your cables more than your pedals? The Terminal adds new routing possibilities to a more permanent setup. Its half-normalled wiring, which is also used in recording studio patch bays, allows an audio signal to pass "normally" and to be copied from the Green SND jack without interruption. However, the signal can also be cut off or replaced by patching into the RTN jack. It's easy to insert effects and re-route instruments without pulling your rig apart.

This simple but very useful design was originally a custom project for musician Tycho, who is using Terminal in his studio and live rigs to quickly patch between sections of pedal and instrument chains. Community interest in the product has led Boredbrain to produce Terminal in limited batches. Each unit is hand-built; from drilling and printing to wiring, soldering and assembling.

Pedalboard access points:

Each Terminal channel is placed at specific points in the signal chain. New effects can then be inserted at these points, or entire sections can be bypassed using a single cable.

Instruments patch hub:

Each Terminal channel is a dedicated patch point for an instrument signal on its way to a mixer or DAW. Effects can be inserted into the signal easily, or it can be copied to another channel.
Read more
 2 in stock $91.68
Click for better price!
quote 731235
Cat: 719645 Rel: 18 Jul 19 • View all Synthesisers
 
Modular synthesiser starter rack
Notes: A complete AE modular system in a one-row Rack; containing the following modules:

- MASTER
- 2 OSC/D
- VCO
- NOISE
- LFO
- SVFILTER
- ENV
- 2VCA
- 2ATT/CV
- MIXER
- SAMPLE&HOLD
- DELAY

The case is extendable; via a joint kit (not included) another case of this width can be attached at a free angle; the bus is connected via a short connector cable between both cases.

It is shipped complete with power supply unit, MIDI breakout cable, a bunch of patch wires of every type and a quick start guide.
Read more
 1 in stock $364.66
Click for better price!
quote 719645
Cat: 739057 Rel: 19 Jul 19 • View all Synth modules
 
Two channel, +4dBu balanced line level outputs
Notes: This module has 1/8" jacks to accept either mono or stereo audio signals from your modular gear.
It features input level indicator LEDs, and contains all the gain control circuitry necessary to drive external audio gear at the proper levels.

A ribbon cable is included for connecting it to either the Stereo Out Jacks 1U module, or a compatible Intellijel case with 1/4" jacks (e.g. 7U x 104HP, 7U x 84HP, or Palette 62).
Read more
 1 in stock $77.09
Click for better price!
quote 739057
Cat: 739049 Rel: 19 Jul 19 • View all Synth modules
 
Headphone amp capable of driving high impedance headphones via a 1/4" stereo Neutrik jack
Notes: Outs enables your modular system to output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces. Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4dBu balanced professional line-level standard or the -10 dbV unbalanced standard.

Headphone monitoring is also provided via a low noise built-in headphone amp (with its own independent level control), capable of driving a wide range of impedances - from studio grade headphones to portable style earbuds.

To use Outs, simply connect the final output of your patch to the 1/8" inputs (where the built-in activity LEDs light up to indicate the presence and intensity of the input signal). The left input is normalled to the right, so you can create a stereo signal from a mono source. Or if you have an Intellijel Mixup, you can remove a jumper from its rear panel, and connect it to the Outs module using the 3-pin link cable included with the Mixup.
Read more
 2 in stock $165.65
Click for better price!
quote 739049
Cat: 739050 Rel: 19 Jul 19 • View all Synth modules
 
Three-channel active/buffered attenuverter & summing mixer
Notes: Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch.

Each input is normalled to a built-in precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch. Outputs A and B are also capable of a range of 0-10 / -10 to +10 when using the special function switches.

Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.

In addition, each channel has a "special function" switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.
Read more
 2 in stock $121.89
Click for better price!
quote 739050
FORTHCOMING
Intellijel Palette 62 4U x 62HP Powered Case With 40W Meanwell PSU Adapter & MIDI Adapter Cable (silver)
coming soon $339.65
FORTHCOMING
Intellijel Stereo Out Jacks 1U Balanced Stereo Line Output Module
Cat: 739060 Rel: 22 Jul 19 • View all Synth modules
 
Dedicated jack expansion module for use with the Stereo Out 1U module
coming soon $23.95
Cat: 739052 Rel: 19 Jul 19 • View all Synth module accessories
 
Bi-directional audio board with four TRS jacks for 7U cases
Notes: The new, 2nd generation Audio Jacks Board comes pre-installed in every Intellijel 7U case manufactured since early 2019. Because this board is more fully featured than the previous generation, it's available as a stand-alone component for anyone who wishes to update an older 7U case.

You can tell which board you have by looking at the connectors. The new Audio Jacks Board has a large shrouded header flanked by two smaller shrouded headers, flanked by two link connectors at either end. Older boards have only one connector along the bottom edge.

The board holds four Neutrik TRS jacks, each of which can be configured as either an input or an output depending on the modules you connect. This allows you maximum flexibility when configuring your case - whether you wish to use the audio jacks as outputs, inputs, sends & returns; or some combination of these.

The jacks carry different audio signals depending on what you connect to the Audio Jacks Board. Please refer to the manual for more details on the many options available.
Read more
 1 in stock $27.87
FORTHCOMING
4ms Row Power 35 Power Solution For Eurorack Systems (white) 4ms Row Power 35 Power Solution For Eurorack Systems (white) 4ms Row Power 35 Power Solution For Eurorack Systems (white)
Cat: 739048 Rel: 22 Jul 19 • View all Synth modules
 
Eurorack power supply module - 4HP
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.4A
-12V @ 1.25A
+5V @ 1.0A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
coming soon $145.86
Cat: 739038 Rel: 15 Jul 19 • View all DJ gifts & gadgets
 
Cassette tape shaped greeting card with inbuilt voice recorder
Notes: A cassette-tape-shaped greeting card for sending recorded messages to friends and family. When a hand written message doesn't quite cut it, send a sound recording in the form of a retro mixtape. Record for up to two minutes, handwrite a message, seal with the included sticker and send off to the lucky recipient. Your message will play automatically when the card is opened. Re-recordable and endlessly re-useable so you can pass messages back and forth forever.
Read more
 More than 10 in stock $10.41
Cat: 734840 Rel: 15 Jul 19 • View all Synth modules
 
Analogue VCO focused on all aspects of modulation - 12HP
Notes: The OSC1 from Future Sound Systems presents a voltage-controlled analogue oscillator with a few features unexpected of a basic oscillator, with a particular focus on covering all bases of signal modulation. Once triangle, sinusoidal and pulse waveforms are derived from its sawtooth core, each waveform is passed through a VCA. The outputs from these VCAs are then summed at the Mix output, which can be switched between 2- and 4-quadrant-multiplication modes. These two QM modes allow for a plethora of amplitude modulation effects to be achieved. Level controls for each waveform dictate both static level, but also depth of modulation through careful design of the control summation. Each individual waveform output is taken pre-VCA for maximum patching flexibility.

Shape modulation of the triangular, sinusoidal and pulse waveforms is also available. Both the triangular and sinusoidal waveshapes can be skewed forward or backward into ramp-like shapes, whilst shaping the pulse wave gives standard pulsewidth modulation.

Frequency modulation is available in both Linear and Exponential modes. The OSC1 also tracks to 1V/Octave over four octaves in its audible (HF) range, but can also be used as a low frequency oscillator in LF mode.

A Sync input allows for the OSC1 to be reset by an external signal. A rising edge will reset the sawtooth wave to its peak, from which it descends. The Inject input, meanwhile, allows for external signals to interfere with the sawtooth core. This allows for intermodulation-type effects to be produced, and opens new realms of chaotic oscillations.
Read more
 2 in stock $247.97
Cat: 739063 Rel: 19 Jul 19 • View all Speaker stands, pads & mounts
 
Isolation, sound clarity & openness for studio monitors & speakers
Notes: The ISO-PUCK mini is the new little brother of the popular ISO-PUCK, offering the same benefits but designed for lighter speakers and monitors. The IsoAcoustics ISO-PUCK mini provide an innovative new approach in isolating studio monitors, speakers and other systems. This unique design provides a high degree of isolation while resisting lateral movement and oscillations, which results in greater sound clarity and focus. This versatile isolation tool is possibly the most cost effective upgrade available for improving the performance and clarity of your speakers or monitors.
Read more
 8 in stock $103.15
Click for better price!
quote 739063
FORTHCOMING
Iso Acoustics Stage 1 Board Isolation Platform For Use With Stage 1 Isolators (sold seperately)
coming soon $46.89
Cat: 725971 Rel: 15 Jul 19 • View all Synth module accessories
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 2 in stock $15.62
Cat: 725964 Rel: 15 Jul 19 • View all Synth module accessories
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 3 in stock $15.62
Cat: 725965 Rel: 15 Jul 19 • View all Synth module accessories
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 2 in stock $15.62
Cat: 725967 Rel: 15 Jul 19 • View all Synth module accessories
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 3 in stock $15.62
Cat: 725975 Rel: 15 Jul 19 • View all Synth module accessories
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 2 in stock $15.62
Cat: 725970 Rel: 15 Jul 19 • View all Synth module accessories
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 2 in stock $15.62
Cat: 725974 Rel: 15 Jul 19 • View all Synth module accessories
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 2 in stock $15.62
Cat: 725976 Rel: 15 Jul 19 • View all Synth module accessories
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 3 in stock $15.62
Cat: 736449 Rel: 15 Jul 19 • View all Synth modules
 
Facilitates effects processing between eurorack, guitar pedals & electronic instruments
Notes: Want to connect outboard gear to your eurorack synthesizer without taking up valuable HP in your case? The INTRFX allows eurorack-level signals to be processed with pedals and/or outboard effects, and also allows line-level instruments to be processed with eurorack modules. Each of its three channels has an Interchange Switch to swap this mode, as well as an FX Blend parameter which can be controlled via CV. Because of its compact physical design, the INTRFX can be placed almost anywhere and connected to eurorack systems with 3.5mm patch cables rather than bulkier 1/4-in cables.

Feedback effects can be achieved by switching into the "wrong" mode, sending the FX return back into the FX send, while still allowing for dry signal blend and modulation. Channels can also be patched into one another and toggled between modes for experimental routing. Conveniently, each channel can operate as a reversed linear VCA for both audio and DC signals if no effects are used.

Whether you'd like to patch eurorack through some classic pedals or run a drum machine through your gnarliest modules, INTRFX makes these connections easy and flexible.
Read more
 More than 10 in stock $216.71
Click for better price!
quote 736449
NUX PA50 Personal Monitor Guitar Amplifier (monitor/guitar amplifier)
NUX
Cat: 735361 Rel: 15 Jul 19 • View all Guitar amplifiers
 
Personal monitoring amplifier featuring 2 separate input channels with different EQ response
Notes: The NuX PA-50 personal monitoring amplifier has a flat frequency response and is equipped with a full range 2-way speaker set. 2 independent channels each have a different EQ response. Channel 1 is improved for dynamic sound and designed to enhance low and high frequencies. Channel 2 has a flat response which does not colour the tone of the input source. Use with a processor or IR loader, such as NUX Solid Studio to give the true sound your favourite guitar amplifier(s) without carrying the whole rig. And use the 3-band EQ and you can fine-tune your output to get a perfect result.
Read more
 2 in stock $167.74
Click for better price!
quote 735361
FORTHCOMING
Aliens Exposed
VARIOUS
Cat: RYE 1236. Rel: 22 Jul 19
 
50s/60s
coming soon $15.89
FORTHCOMING
Secrets Of The Ancient World
VARIOUS
Cat: RYE 1237. Rel: 22 Jul 19
 
50s/60s
coming soon $15.89
Cat: 734882 Rel: 18 Jul 19 • View all Synth modules
 
High-quality dual linear VCA with mixing functionalities
Notes: Audiophile Circuits League VC Dual Amp contains two fully discrete voltage controllable amplifiers with linear characteristic. It is based on a new circuit design which delivers unheard clarity of sound. To this day there is no other VCA using this special technique!

The module offers a very low harmonic distortion in the whole linear gain range, no crossover distortion and no overshoots nor ringing. Furthermore, it has a very high dynamic range which provides a lot of headroom. The VCAs will amplify the input signal very accurately and it will sound crystal clear, without any coloration, distortion or bleed. Each channel has a Gain potentiometer for manually setting the VCA's initial gain and a control voltage input which is equipped with an attenuverter for scaling the modulation.

Thanks to normalized signal and CV inputs, both VCAs can be used in conjunction - great for processing stereo material. Furthermore, you can create voltage controlled panning effects and crossfades in next to no time. Beside the two individual audio outputs from each VCA, there is a Sum-output which provides the mix of the output of both VCAs and of the signal coming from the Aux-input. This additional input has no level control and is mixed at unity gain. Thus three different signals can be mixed together.

The amplifiers are also suitable for processing control voltages thanks to a completely DC-coupled signal path. Behind its simple appearance, this module shines with its functionality and sound quality!
Read more
 1 in stock $282.35
Click for better price!
quote 734882
Cat: 739133 Rel: 16 Jul 19 • View all Synth modules
 
Random looping sequencer - black faceplate, 12HP
Notes: Permutation is a set of random sequencers that use a digital shift register to generate unpredictable CV and gate patterns that can be locked into repeating loops. The concept is based on the Turing Machine, an open source module designed by Tom Whitwell.

Permutation retains the core functionality of the Turing Machine while adding new features such as dedicated outputs for each bit of the shift register, CV inputs for all parameters, and an internal bipolar VCA. Locked sequences are also saved across power cycles.
Read more
 1 in stock $244.84
Click for better price!
quote 739133
Cat: 739134 Rel: 16 Jul 19 • View all Synth modules
 
Random looping sequencer - silver faceplate, 12HP
Notes: Permutation is a set of random sequencers that use a digital shift register to generate unpredictable CV and gate patterns that can be locked into repeating loops. The concept is based on the Turing Machine, an open source module designed by Tom Whitwell.

Permutation retains the core functionality of the Turing Machine while adding new features such as dedicated outputs for each bit of the shift register, CV inputs for all parameters, and an internal bipolar VCA. Locked sequences are also saved across power cycles.
Read more
 1 in stock $222.96
FORTHCOMING
Grayscale Supercell Granular Synthesis Module (grey panel version, an expanded version of Clouds by Mutable Instruments)
Cat: 739128 Rel: 22 Jul 19 • View all Synth modules
 
Expanded take on Mutable Instruments' famous Clouds granular texture synthesiser - grey faceplate, 34HP
Notes: Clouds, the granular synthesis module from Mutable Instruments, was discontinued in 2017. Supercell brings back Clouds in a more accessible 34 hp form factor, offering an improved user interface and several additional features:

- Each of the Blend parameters (Feedback, Panning, Mix, and Space) have dedicated knobs with their own CV inputs and inverting attenuators (attenuverters).

- The inputs and outputs now have mute switches, stereo VCAs, and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.

- A stereo output gain control has been added, providing an additional +6 dB of gain to compensate for low output levels when using certain parameter combinations.

- The complex process of changing the sampling time and managing presets has been simplified with dedicated switches and status LEDs.

- Extensive modulation options for all parameters including direct patching of external CV, distribution of one CV to all parameters via the AUX input, or an internal smooth random CV that is normalized to any unpatched inputs when AUX is also unpatched. The attenuverters control the modulation depth in all three cases. As of firmware v1.01 the internal modulation rate can be adjusted within a range of 1 to 100 Hz.

- The inputs and outputs now include stereo VCAs and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.

- Pitch is now controlled by two separate inputs: the V/Oct input is exponential and the Pitch input is linear. When both inputs are used, their voltages are summed.

- A manual Trig switch (for capturing individual grains) has been added, in addition to the Trig input that was present on Clouds.

All other features of the original Clouds remain intact, including access to the alternate modes. Thanks to Olivier Gillet for making the original Clouds hardware and firmware available under open-source licenses. Third-party firmware such as Parasites (by Matthias Puech) and Beat Repeat (by Julius Kammerl) will be supported in future firmware updates after the initial release of the module.
Read more
coming soon $476.15
Cat: 739136 Rel: 16 Jul 19 • View all Synth modules
 
Random looping sequencer - silver faceplate, 6HP
Notes: Permutation is a set of random sequencers that use a digital shift register to generate unpredictable CV and gate patterns that can be locked into repeating loops. The concept is based on the Turing Machine, an open source module designed by Tom Whitwell.

Permutation retains the core functionality of the Turing Machine while adding new features such as dedicated outputs for each bit of the shift register, CV inputs for all parameters, and an internal bipolar VCA. Locked sequences are also saved across power cycles.
Read more
 1 in stock $194.83
Click for better price!
quote 739136
Cat: 739137 Rel: 16 Jul 19 • View all Synth modules
 
Voltages expander for Permutation - black faceplate, 6HP
Notes: Variant is an expander module based on the original Voltages expander for the Turing Machine. Variant adds two additional bipolar CV outputs (with modulation inputs) that are derived from Permutation's gate sequence.
Read more
 1 in stock $94.80
Click for better price!
quote 739137
Cat: 739131 Rel: 16 Jul 19 • View all Synth modules
 
Random looping sequencer - black faceplate, 18HP
Notes: Permutation is a set of random sequencers that use a digital shift register to generate unpredictable CV and gate patterns that can be locked into repeating loops. The concept is based on the Turing Machine, an open source module designed by Tom Whitwell.

Permutation retains the core functionality of the Turing Machine while adding new features such as dedicated outputs for each bit of the shift register, CV inputs for all parameters, and an internal bipolar VCA. Locked sequences are also saved across power cycles.
Read more
 1 in stock $258.38
Cat: 739135 Rel: 16 Jul 19 • View all Synth modules
 
Random looping sequencer - black faceplate, 6HP
Notes: Permutation is a set of random sequencers that use a digital shift register to generate unpredictable CV and gate patterns that can be locked into repeating loops. The concept is based on the Turing Machine, an open source module designed by Tom Whitwell.

Permutation retains the core functionality of the Turing Machine while adding new features such as dedicated outputs for each bit of the shift register, CV inputs for all parameters, and an internal bipolar VCA. Locked sequences are also saved across power cycles.
Read more
 1 in stock $194.83
Click for better price!
quote 739135
Cat: 731219 Rel: 15 Jul 19 • View all Synth modules
 
16 voice oscillator - 12HP
Notes: The Demon Core Oscillator is a 16-voice DCO based on classic keyboard synthesizers.

This module offers also a static detune spread and a CV controllable core stability feature similar to Sequential Synthesizers. It introduces VCO-like pitch drift and jitter, allowing the module to sound like 80's polysynths.

With the help of the separately available expander, the module can be played polyphonically via MIDI.
Read more
 4 in stock $473.02
Click for better price!
quote 731219
Cat: 731220 Rel: 15 Jul 19 • View all Synth modules
 
Expander for the Demon Core Oscillator - 8HP
Notes: This module brings polyphonic control to the Demon Core oscillator.

The stacks can be divided between up to 16 polyphonic voices via MIDI or four 1V/oct inputs with attenuator. The oscillator can be set in continuous streaming mode or in MIDI gating mode with an ADSR envelope for each polyphonic voice.

The time sync can be also triggered via MIDI for each voice.
Read more
 4 in stock $270.89
Click for better price!
quote 731220
Map Of The Soul: Persona (Version 03 Edition) (CD + book + booklet + photos)
Cat: BHK 1057. Rel: 19 Jul 19
Pop
  1. Intro: Persona
  2. Boy With Luv (feat Halsey)
  3. Mikrokosmos
  4. Make It Right
  5. HOME
  6. Jamais Vu
  7. Dionysus
 in stock $18.49
Cat: 699418 Rel: 14 Aug 18 • View all DJ styluses
 
Replacement stylus
Notes: Tonar replacement needle/stylus for Shure M-44-7. Diamond tip.
Read more
 More than 10 in stock $17.71
Love Yourself: Her (CD + book + booklet + photo in slip-case)
Cat: L 200001463A. Rel: 19 Jul 19
Pop
  1. Intro: Serendipity
  2. DNA
  3. Best Of Me
  4. Track 4
  5. Pied Piper
  6. Skit: Billboard Music Awards Speech
  7. MIC Drop
  8. Go
  9. Outro: Her
  10. Track 10 (bonus track)
  11. Track 11 (bonus track)
 in stock $22.66
Cat: 601625 Rel: 19 Feb 16 • View all DJ headphones
 
Professional closed, dynamic headphones with 1.5m steel cable
Notes: The Sennheiser HD 25 Headphones have been redesigned, featuring the iconic split headband with a single-sided connection cable and a flip-away earcup for convenient single-sided listening.

With a frequency response of 16Hz to 22kHz, an impedance of 70 ohms and a maximum SPL of 120dB, the HD 25 headphones are ideal for any monitoring application; whether broadcasting, live recording, in the DJ booth or just travelling from venue to venue.
Read more
 More than 10 in stock $116.17
Click for better price!
quote 601625
FORTHCOMING
Yamaha Padded Carry Bag For MX61 Synthesiser
 
Official bag in black colour
Notes: The official soft-bag for the brilliant Yamaha MX61 features the MX61 logo and straps for wearing as a backpack.
Read more
coming soon $55.21
FORTHCOMING
Yamaha Strap Kit For Reface Synthesiser
 
Guitar strap mounting adapter
Notes: With buttons to attach a guitar strap in order to use the Yamaha Reface as a keytar.
Read more
coming soon $40.62
FORTHCOMING
Blank Forms Vol 4: Intelligent Life
coming soon $24.75
Cat: 648928 Rel: 25 May 17 • View all Synth modules
 
Compact programmable clocked modulation source in Eurorack format - 8HP
Notes: 'Pamela's NEW Workout' is a compact programmable clocked modulation source for your Eurorack modular synthesiser system. It provides 8 highly editable outputs producing various control voltage signals correlated and synced to a BPM based master clock.

Building on the original 'Pamela's Workout', this new evolved model maintains the original's form factor and intuitive workflow but greatly improves on and adds many new features with upgraded hardware, a new OLED display and rewritten software.

Each output is now able to provide not just clocked triggers but also rhythmic waveforms with many parameters controllable directly and via assigning to external CV control. Pamela has grown beyond a clever clock and now provides almost limitless synced modulation possibilities.

Improvements have been made to overall clock stability and integration with external clocks and devices. Also new are dedicated MIDI and Din Sync clock outputs available via optional expander modules.
Read more
 More than 10 in stock $226.09
Click for better price!
quote 648928
Items 1 to 50 of 4,529 on page 1 of 91
1  2  3  ...  91  »

Filter

Saved Searches
Save current search
Release Date
Close