Search results: DC-10

Notes: The shorter and wider brother to the popular Triatt module!

The four handy knobs can act as active attenuators (unipolar) or attenuverters (bipolar) depending on the setting of the two-position switches above each one.

Each input is normalled to a precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 v or -5 to +5 v depending on the position of the mode switch.

- 2 modes for each channel
- 5v normalled to each input
- With external signals it acts as active/buffered attenuator/attenuverter/mixer
- Each output normalled to mix into the adjacent channel on the right making it possible to do sub mixes in groups of 2, 3 or all four channels.

Notes: Duatt is a dual-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch. It's a versatile and super handy utility module that will find its way into almost any patch you make!

Each input is normalled to a built-in +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch.

Channel A's output is normalled into the output of channel B for mixing duties, and channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A.

Notes: With these power split cables, it is easy to distribute the power from an AD-9 to more than one pedal.

The new design introduces flat contacts (similar to the popular EBS flat patch cables) to further reduce space on your pedalboard.

Notes: One to four configuration.

With these power split cables, it is easy to distribute the power from an AD-9 to more than one pedal.

The new design introduces flat contacts (similar to the popular EBS flat patch cables) to further reduce space on your pedalboard.

Notes: The Heart and SOL of Your Pedalboard

SOL is the ultimate solution for bringing life to a small to medium-sized pedalboard setup, especially if you are using power-hungry pedals. SOL is the smallest mains-powered switch-mode power supply we make at CIOKS (no wall-warts here) and the no-frills design plus massive power will leave you free to focus on your creative spark. Featuring the same 660mA at 9V DC per outlet and four switchable voltages on each outlet as its bigger brother CIOKS DC7, SOL is the most powerful small form-factor power supply available today with a total of 30 watts of DC power available.

Specifcations

Mains input: 100-240V AC universal
Outlet 1-5:
9V DC / 660mA or
12V DC / 500mA or
15V DC / 400mA
or 18V DC / 330mA each
Total output power: max. 30W

What's in the box

9 Flex cables included:
3 x 1030 - Type 1 - 5,5/2,1mm DC plug, centre negative, L-shape, 30cm (black)
2 x 1050 - Type 1 - 5,5/2,1mm DC plug, centre negative, L-shape, 50cm (black)
1 x 2050 - Type 2 - 5,5/2,1mm DC plug, centre positive, L-shape, 50cm (red)
1 x 4050 - Type 4 - 5,5/2,5mm DC plug, centre positive, L-shape, 50cm (green)
1 x 1035 - Split Flex type 1 - 30 & 50cm (black)
1 x 1533 - 3-way daisy chain Flex type 1, 30+30+50cm (black) Included in the box
SOL power supply
AC mains power cord (region specific)
Mounting hardware for Pedaltrain and Templeaudio boards (two screws and one hex-key)
Product manual
Flex Guide
CIOKS sticker sheet

Notes: TPS80W Triple Power Supply - TYPE A

The TPS80W is a high power, super efficient and low noise studio grade power system for your Eurorack Modular. We carefully designed this power supply to perform optimally with even the most demanding, noisy and power hungry modules in your rig.

Notes: Guitar effects pedals are becoming more and more popular with DJs and producers with their ability to trigger the right noise at exactly the right time.

And if you're a guitarist with a taste for effects pedals, chances are you own or have played with or used a legendary Boss Stompbox at some point.

These units are are the world's best selling and can be found everywhere and cover a dazzling amount of effects. This is where Decksaver steps in.

Whether you use your Boss pedals for processing other instruments, or even for your guitar, any unit that's regularly stomped on can suffer issues - and that's before we consider other stressors such as damage to switches or knobs during travel,or from dust, fluids or accidental impact.

These wonderful devices deserve care during downtime with the kind of protection only Decksaver covers can provide.

Precision moulded in-house to ensure a perfect fit whilst accommodating cables, our cover shields delicate controls and internal components from damage at home, on the road and in the studio.

Fits all the Boss single pedal Stompboxes.

Dimensions

Weight: 0.16kg
Length: 13.5cm
Width: 8.4cm
Height: 3.8cm

Notes: The DC-USB1 is a power cable that allows the RODECaster Pro to be powered from any compatible USB output, making it entirely portable. It features a locking connector for added security. A high-power (2.4A minimum) USB output is required for operation.

*USB device/power bank not included.

Power Requirements:
5V/2.4A (USB)

12V/1A (DC)

Notes: EBS now introduces 1-to-1 power distribution cables in a super compact and sleek design to use with Multi Power Supplies.

They are made on the same concept as the latest EBS DC-split cables with flat contacts, with the difference that the 1-to-1 cables offer the option to choose between straight-to-angled or angled-to-angled contacts.

The cables are available in four different lengths.

Notes: EBS now introduces 1-to-1 power distribution cables in a super compact and sleek design to use with Multi Power Supplies.

They are made on the same concept as the latest EBS DC-split cables with flat contacts, with the difference that the 1-to-1 cables offer the option to choose between straight-to-angled or angled-to-angled contacts.

The cables are available in four different lengths.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Centre Negative to Centre Positive using one of the new EBS adapter cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adapter.
Want to change the polarity? Use the DC1-48 90/0 RP adapter.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Centre Negative to Centre Positive using one of the new EBS adapter cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adapter.
Want to change the polarity? Use the DC1-48 90/0 RP adapter.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adaptor cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Center Negative to Center Positive using one of the new EBS adaptor cables.

Here's how you do it:

To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adaptor.
Want to change the polarity? Use the DC1-48 90/0 RP adaptor.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Center Negative to Center Positive using one of the new EBS adaptor cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adaptor.
Want to change the polarity? Use the DC1-48 90/0 RP adaptor.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: ***B-STOCK: Box opened, product in perfect working order***


The DC-USB1 is a power cable that allows the RODECaster Pro to be powered from any compatible USB output, making it entirely portable. It features a locking connector for added security. A high-power (2.4A minimum) USB output is required for operation.

*USB device/power bank not included.

Power Requirements:
5V/2.4A (USB)

12V/1A (DC)

Notes: Pico Mixer is simple 3 channel DC coupled mixer intended to mix audio signals and CV signals in order to obtain complex modulations. Also it may serve as CV and audio attenuator.

Features:
3 inputs
Diode protection against overvoltage

Technical specification:
Mixer gain: 1
Power consumption +4mA, -4mA
Module width: 3HP
Module depth: 35mm