Search dance music

Notes: Module A-147-4 is a dual voltage controlled LFO (Low Frequency Oscillator). Each LFO has the five waveforms triangle, sine, rising and falling sawtooth, as well as rectangle available. The rectangle output features manually adjustable pulsewidth and pulsewidth modulation by means of an external control voltage. The core waveform is triangle. The other waveforms are derived from triangle by means of waveform converters. The frequency of each LFO can be adjusted manually and modulated by means of an external control voltage with associated attenuator and polarity switch. By means of a jumper the basic frequency range of each LFO can selected: about 0.02 Hz (~ 50 seconds) ... 2.5kHz or about 0.0017 Hz(~ 600 seconds) ... 220Hz. That way each LFO can be used also as a VCO with a max. frequency of about 2.5kHz. Each LFO features a reset input which can be used to reset the triangle signal.

The module has these controls and in/outputs available:

Control F : manual control of the frequency, for each LFO the frequency range can be selected by means of a jumper from two values (see technical notes)

frequency coverage of control F in the high frequency range: about 0.075 Hz (~ 13 seconds) ... 1,4kHz

frequency coverage of control F in the low frequency range: about 0.007 Hz (~ 140 seconds) ... 125Hz

Control CV: attenuator for the signal applied to the CV socket, by means of a jumper a small positive voltage can be applied to the switching contact of the /CV/ socket, as long as no patch cable is connected to /CV/ socket the CV control then works as fine control for the frequency

Switch CV Pol.: polarity switch for the signal applied to the socket /CV/

Control PW/PM: combined control for manual and CV control of the rectangle pulsewidth:

when no patch cable is connected to socket /P/ the control is used to adjust the pulsewidth (PW) manually

when a patch cable is connected to socket /P/ the control works as attenuator for the external CV signal with a basic pulsewidth of 50:50.

Socket /CV/: frequency control voltage input, in the factory the module is adjusted so that the sensitivity of this input is exactly 1V/octave when the CV control is fully CW.

Socket /R/: reset input, according to the associated jumper the reset input is edge triggered or level controlled (see technical notes for details)

Socket /P/: pulsewidth control voltage input

Sockets with waveform symbol: output of the waveform in question (triangle, sine, rising and falling sawtooth, rectangle)

The output voltage ranges are about -5V ... +5V (10Vpp), except the rectangle output

For the rectangle output one can choose by means of a jumper if the range is about -5V ... +5V or 0...+10V.

LED: visual control of the LFO (triangle)

The inputs of the module are labelled with white characters on black background (in the text included into two slashes). The outputs are labelled with black characters.
Technical notes and special features:

The basic frequency range of each LFO can be selected by means of a jumper. The settings correspond to two different capacitor values for the VCO circuit. The relation between the two ranges is about 1:11. When the upper range is selected frequencies from about 0.02 Hz up to 2.5kHz can be generated. For the lower range the values are about 0.0017 Hz ... 220Hz. To obtain these full frequency ranges external control voltages are required. With the frequency control F only the frequencies mentioned above are possible.

Apart from that the range for the manual control F can be reduced to obtain a finer resolutuion. For this a jumper has to be removed. The range of control F is then reduced to about 1:4.5 only.

In the factory the starting voltage of the triangle output after a reset is adjusted to 0V, i.e. the triangle starts from 0V with the rising slope after a reset. By means of a trimming potentiometer the starting voltage can be adjusted to another value (e.g. to -5V).

Another jumper is used to set the reset behaviour to edge triggered or level controlled. When set to edge triggered the rising edge of reset signal is used for the reset (independent of the duration of the "high" state of the reset signal). When set to level controlled the triangle output remains at the starting voltage as long as the reset signal is "high". Only when the reset signal turns "low" the triangle starts.

Dimensions
8 HP
45 mm deep

Current Draw
80 mA +12V
70 mA -12V

Notes: Arturia's new KeyLab Essential 3 offers a new level of accessible, enjoyable, and creative music making, redefining the essence of a modern universal keyboard controller.

From its refreshing new design, to its vastly upgraded creative workflow, to an expanded software package, it promises to shake up the affordable controller market by empowering modern musicians and sound explorers looking to expand their setup without breaking the bank.

Main selling points

Fit for any style and any setup

For DAW producers, musicians with hybrid setups, or performers using hardware; enhance any creative setup or musical style with MIDI out & USB power, deep DAW compatibility, and premium software.

The new standard for affordable keyboard controllers

A keyboard controller that doesn't need tons of controls, menu diving, or complex configuration to operate. KeyLab Essential 3 looks modern, feels great, and removes creative barriers for next-level music making.

Directly-linked with Arturia's industry-leading software ranges

Many musicians and producers will be familiar with Arturia's award-winning software; KeyLab Essential 3 is part of the same range, seamlessly integrating with Analog Lab V, Pigments, and V Collection.

Features

Premium Keybed quality
49 note velocity-sensitive keyboard with hybrid synth-piano feel

Pads & controls
1 clickable encoder
9 rotary encoders
9 x 30mm faders
8 transport switches
4 command switches
1 modulation wheel & bend wheel
8 touch & pressure-sensitive pads

Display control
2.5" LCD display with contextual buttons
Real-time feedback on tweaks and controls
Smart features

Multi-mode arpeggiator
Chord mode
Scale mode
Hold function
Semitone transpose

Software integration
Seamless integration with Analog Lab V: select sounds, browse presets, smart-assigned controls
Custom DAW scripts for FL Studio, Logic Pro, Ableton Live, Cubase, Bitwig Studio
Also compatible with MCU/HUI control
Up to 6 user presets for a totally customizable experience

Included Software titles & services
Analog Lab V software with 2000+ sounds
Ableton Live Lite
Native Instruments' The Gentleman
UVI Model D
2-month Loopcloud subscription
Melodics subscription for 40 lessons

Connectivity
USB-C connects to computers and MIDI Control Center
MIDI 5-pin DIN output for connection to external instruments, gear
Control input for pedal: sustain, expression, or footswitch
USB-C powered

Platform specifications

Windows
Win 10+ (64bit)
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost)
3GB free hard disk space
OpenGL 2.0 compatible GPU
ARM processors not supported on Windows

Required configuration
Works in Standalone, VST, AAX, Audio Unit, NKS (64-bit DAWs only).

Apple
Mac OS 10.13+
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost) or Apple Silicon CPU
3GB free hard disk space
OpenGL 2.0 compatible GPU
Work with ASC
An elegant and simple solution to help you install, activate, and update your Arturia software instruments.

What's in the box

Box content:
KeyLab Essential Unit
USB-A to USB-C cable
Registration card

Dimensions for 49 keys
Size : 31.1 x 9.45 x 2.76 inches (790 x 240 x 70mm)
Weight : 6.1 lbs. (2.76 Kg)

Notes: Module A-147-4V is a dual voltage controlled LFO (Low Frequency Oscillator). Each LFO has the five waveforms triangle, sine, rising and falling sawtooth, as well as rectangle available. The rectangle output features manually adjustable pulsewidth and pulsewidth modulation by means of an external control voltage. The core waveform is triangle. The other waveforms are derived from triangle by means of waveform converters. The frequency of each LFO can be adjusted manually and modulated by means of an external control voltage with associated attenuator and polarity switch. By means of a jumper the basic frequency range of each LFO can selected: about 0.02 Hz (~ 50 seconds) ... 2.5kHz or about 0.0017 Hz(~ 600 seconds) ... 220Hz. That way each LFO can be used also as a VCO with a max. frequency of about 2.5kHz. Each LFO features a reset input which can be used to reset the triangle signal.

The module has these controls and in/outputs available:

Control F : manual control of the frequency, for each LFO the frequency range can be selected by means of a jumper from two values (see technical notes)
frequency coverage of control F in the high frequency range: about 0.075 Hz (~ 13 seconds) ... 1,4kHz
frequency coverage of control F in the low frequency range: about 0.007 Hz (~ 140 seconds) ... 125Hz
Control CV: attenuator for the signal applied to the CV socket, by means of a jumper a small positive voltage can be applied to the switching contact of the /CV/ socket, as long as no patch cable is connected to /CV/ socket the CV control then works as fine control for the frequency
Switch CV Pol.: polarity switch for the signal applied to the socket /CV/
Control PW/PM: combined control for manual and CV control of the rectangle pulsewidth:
when no patch cable is connected to socket /P/ the control is used to adjust the pulsewidth (PW) manually
when a patch cable is connected to socket /P/ the control works as attenuator for the external CV signal with a basic pulsewidth of 50:50.
Socket /CV/: frequency control voltage input, in the factory the module is adjusted so that the sensitivity of this input is exactly 1V/octave when the CV control is fully CW.
Socket /R/: reset input, according to the associated jumper the reset input is edge triggered or level controlled (see technical notes for details)
Socket /P/: pulsewidth control voltage input
Sockets with waveform symbol: output of the waveform in question (triangle, sine, rising and falling sawtooth, rectangle)
The output voltage ranges are about -5V ... +5V (10Vpp), except the rectangle output
For the rectangle output one can choose by means of a jumper if the range is about -5V ... +5V or 0...+10V.
LED: visual control of the LFO (triangle)
The inputs of the module are labelled with white characters on black background (in the text included into two slashes). The outputs are labelled with black characters.

Technical notes and special features:

The basic frequency range of each LFO can be selected by means of a jumper. The settings correspond to two different capacitor values for the VCO circuit. The relation between the two ranges is about 1:11. When the upper range is selected frequencies from about 0.02 Hz up to 2.5kHz can be generated. For the lower range the values are about 0.0017 Hz ... 220Hz. To obtain these full frequency ranges external control voltages are required. With the frequency control F only the frequencies mentioned above are possible.

Apart from that the range for the manual control F can be reduced to obtain a finer resolution. For this a jumper has to be removed. The range of control F is then reduced to about 1:4.5 only.

In the factory the starting voltage of the triangle output after a reset is adjusted to 0V, i.e. the triangle starts from 0V with the rising slope after a reset. By means of a trimming potentiometer the starting voltage can be adjusted to another value (e.g. to -5V).

Another jumper is used to set the reset behaviour to edge triggered or level controlled. When set to edge triggered the rising edge of reset signal is used for the reset (independent of the duration of the "high" state of the reset signal). When set to level controlled the triangle output remains at the starting voltage as long as the reset signal is "high". Only when the reset signal turns "low" the triangle starts.

Power consumption: 80mA at +12 V and 70mA at -12 V
Depth: 45mm
HP : 8

Notes: SINGOLI is a 7 channels DC coupled active combiner with an analogue transient detector output.

All the inputs I are equipped with LED meters and a dedicated attenuating potentiometer.

O will give you the combined mixed output.

T is an additional transient detector out that will fire only when a certain threshold is detected from the sum of all the inputs.

The toggle switch activates or deactivate the internal connection to Tutto&Sempre when the two modules are paired together thanks to the included JST cable.

Features

DC coupled mixer with 7 inputs and individual attenuators.
Intensity sensitive LED meters on all the inputs.
Analogue transient detector output.
Toggle switch to activate / deactivate its normalization to Tutto&Sempre.
"Whatever" power connector a.k.a. don't mind the polarity.

Technical Specs

Width: 6HP
Depth: 25mm
15mA +12V
10mA -12V

Notes: The BXx2 is a dual channel preamp, EQ and mixer based on the classic Boss BX series mixers. With the inclusion of both input gain and level controls, each channel can be overdriven, producing the signature saturated and lively sound the BX mixers are known for. The EQ controls provide the channels with simple but great sounding high and low shelf EQs for emphasising and shaping sounds and an additional 'Aux' input allows another mixer or extra sound source to be chained in.

Input gain controls

Sets the input gain of the channel preamp. Higher settings will cause source to overdrive the channel.

Inputs

In 1 - Input to channel 1 of the mixer.

In 2 - Input to channel 2 of the mixer.

Aux - Auxillary mix input for chaining with another mixer or extra source.

Fixed gain (-6dB).

EQ High

Sets the gain of the fixed high shelf EQ. Boosts high frequencies when set above 12 o'clock and cuts when set below.

EQ Low

Sets the gain of the fixed low shelf EQ. Boosts low frequencies when set above 12 o'clock and cuts when set below.

Level

Sets the channel level in the mix. Use level controls to trim back volume when overdriving the preamp.

Output

Audio output producing the mix of the 3 inputs.

Technical specifications

Power: +12V 10mA / -12V 10mA
Size: 8HP
Depth: 32mm

The BXx2 was designed in collaboration with Feedback Modules and is based on their single channel 'PRE BX' module.

Notes: Add external feedback loops, tilt filters and more to the Timiszoara effects module with this versatile expander. A must-have for Timiszoara owners.

Supplier's Notes:
Deva is an expander for Xaoc Devices' Timiszoara multi-fx module designed for creative exploration of the dirty/nasty side of signal processing. Deva opens up the Timiszoara programs you've come to love with some unexpected twists and turns along the way. The analog side features two external feedback loops (for the left and right channel) with tilt filters adjustable via sliders with two additional switches for choosing positive or negative feedback (for each channel). The third slider controls the DAC clock - from overclocking by a factor of two down to 16-times slower, so you can go from chipmunk to hardcore teeth gnashing of underclocked goodness. A switch allows for turning the clock control off for normal/regular operation. All features have inputs for external CV.

Technical details

Eurorack synth compatible
8hp, skiff friendly
Power drawn from Timiszoara: +60mA/ -50mA
Reverse power protection

Notes: Designed to be a highly customizable connection matrix, 3DVCA packs a boat load of utility into a small 6HP package. Four VCAs share the three macro controls: X, Y, and Z. As a group, they shape incoming and outgoing signals and emulate the coordinates of a point in 3 dimensional space. This allow the VCAs to work together in a mono, stereo, or quad configuration and accomplish a variety of mixing, crossfading, and panning functions.

3DVCA is designed to be used in the following functions:

Quad monophonic crossfader
Dual stereo crossfader
Stereo balancer
Stereo VCA
Mono to stereo panner
Unity mixer with up to eight inputs
Quadraphonic panner

Each output has a dedicated SUM input which allows an external signal to be automatically mixed into the output signal. This allows 3DVCA to daisy chain both with other mixers and other 3DVCAs. For example, you can create a full mono, stereo, or quadraphonic mix by plugging the output of each 3DVCA into the sum inputs of the next 3DVCA in the chain. Using this method, a set of 3DVCAs can create a fully voltage controlled and decentralized mixer which ties together anything from a small skiff to a monster synth.

When 3DVCA works as a crossfader or panner, the X and Y parameters follow an equal-power curve that keep output signals at the same volume no matter how many inputs are mixed together. This is in contrast to the Z parameter which follows a linear curve to always behave predictably with external modulation sources. All inputs are fully DC coupled in order to work with modulation speed signals as well as static DC voltage sequences; this means that 3DVCA can handle any sort of signal that you throw at it. All op amps in the device employ rail-to-rail inputs and outputs to enable the largest headroom when mixing many different signals together.

Whether you need to maximize your mixing functionality in the smallest possible footprint or have the most control over every aspect of your system, 3DVCA provides a ton of functionality in any system. Enter a higher dimension of sound with the Mystic Circuits 3DVCA.

Dimensions
6 HP
30 mm deep

Current Draw
45 mA +12V
45 mA -12V

Notes: Simple to look at but deceptively powerful, Dreadbox's Telepathy is a full analogue synth in a small module, featuring VCO, low-pass and high-pass filters, LFO, envelopes and VCA.

Supplier's Notes:
Telepathy is a full voice analogue synthesizer module with deep modulation options due to its multi-destination LFO and Envelope. From Bass to Lead sounds, to drums and drones, Telepathy has broad and versatile sound design capabilities. It has a Full Analogue path (Typhon VCO, 4-pole low pass / 2-pole high pass filters, analogue VCA) that is digitally controlled for more precision over its parameters, resulting in a warm, present and distinct Dreadbox sound.

With lots of useful and musical features integrated into a compact size (10hp), and its skiff friendly design, Telepathy is a great addition to small or large Eurorack systems.

Features:

1x Analogue Oscillator with saw, square, -1 oct square sub and noise, plus PW control for square, level for noise and waveshape
Automatic tuning for the oscillator and fine tune
Analogue 24db Resonant Low pass filter with Oscillator FM and Noise FM and 6db High pass filter
Analogue VCA
1x LFO with Free/Key/Track/BPM/BPM Key modes, Fade in, Triangle/Saw/Ramp/Square/Random waveforms, that is mapped to various parameters
2x Envelopes, one dedicated to the VCA with Velocity control and one loopable for Low pass Filter, Pitch and PW
CV in patch that can be mapped to all the basic parameters in parallel with dedicated amount for each parameter
MIDI in/out+through
CC in/out, Program Change in/out
Multitimbral Chaining functionality via MIDI up to 8 modules 16 presets
10HP

Notes: Arkan

Dual Voltage Polarizer

You may have heard this before: "You can never have enough VCAs". A voltage polarizer (also known as a bipolar VCA or a 4-quadrant multiplier) is often viewed as the VCA better suited for CV. As it can be used as a unipolar VCA and it allows you to invert a signal when it is modulated with a negative voltage. Resulting in interesting movements in your modulations.

What sets Arkan apart from other voltage polarizers is the curvature control, a feature usually only seen in unipolar VCAs. By taking a different approach to the classic voltage polarizer circuitry, Malstrom have devised a unique solution that provides a new way to shape your audio and CV. The non-linearity of the polarizer also makes Arkan really good at reaching silence when presented with a 0V CV signal.

At audio rate, Arkan acts as a ring-modulator with four controls to change timbres.

Boosting adds odd harmonics (symmetrical distortion), while offsetting adds even harmonics (asymmetrical distortion). The modulation curve changes ring modulation sharpness, and modulation strength determines the carrier dominance.

Two identical channels with carefully selected features will make Arkan your go-to modulation control hub. Arkan is especially useful for common utility duties such as mixing, scaling, inverting and offsetting. As well as CV modulation, feedback patching, and waveshaping. All this makes Arkan a very versatile tool that will certainly have a place in your patch!

Features (per channel)

- Input attenuation with inverter switch gives you more precision and range, with voltage inversion and quick silencing.
- Bias input with attenuverter control to offset your input signal or mix/invert another signal.
- CV input with curvature control allows you to shape the polarizer and improve its 0V attenuation.
- CV modulation control to fade in the modulator, allowing you to determine the amount of modulation.
- Voltage gain and polarity led indicators showing you exactly what is happening under the radar.
- Output normalled internally and externally (to other Arkans) to easily mix signals.

Additional features

Optional signal boost (x4 / +12dB) via switch on the PCB to increase voltages when needed.
5V or 10V voltage reference selection for bias voltage and CV input range to adjust Arkan to your system.

Dimensions
- 8HP.
- 28mm, Skiff-friendly.

Power consumption
- 90mA @ +12V.
- 85mA @ -12V.

I/O specs

- All inputs DC coupled.
- All inputs handle audio signals.
- All inputs have 100k input impedance. - All inputs have +-10V Input range.
- CV range +-5V or +-10V.
- Bias Voltage range +-5V or +-10V.
- Boost gain x1 or x4.
- All inputs are overvoltage protected.
- Keyed power header.
- Reverse power protection.

Notes: The Z2040 is TipTop Audio's redesign of the most famous analogue filter from the polysynths of the 80's and features Tiptop Audio's signature lush, big, and creamy sound. Its frequency sweeps make thick bass lines and leads with great dynamics. When modulated with audio frequencies through its various inputs, the Z2040 gets quite colourful and is capable of creating many new sounds and textures as the forces of the incoming waves and their harmonics blend through the filter's non-linear circuit. When set with Resonance feedback fully up, the Z2040 transforms into a pure sine-core VC-Oscillator, great for making snappy percussive elements and whistling sounds.

A look under the hood will find that the heart of the Z2040 is a discrete design 4-pole low pass filter with a core similar to that of the SSM2040 filter chip, used in the 80's Prophet 5 Rev 2 synthesizer, and its brother the SSM2044, used in the famous early EMU samplers and PPG synthesizers of the 80's. Both filters are considered by many to be, "the best sounding filter ever".

The Z2040's four modulation inputs are built to handle CV and audio signals, enabling deep modulation of the filter core and passing signals. A VC resonance input is provided to modulate and even clip the sine wave produced by the filter feedback loop. A Frequency Modulation input (FM) provides dynamic filter sweeps and the unique VC-FM index allows modulation of the incoming FM signals. On top of that, the Z2040 comes with an audio VCA that can be configured to act upon the input or the output of the filter.

Size: 8HP
Depth: 42mm
Power: +12V 20ma / -12V 20ma

Notes: Easy self-assembly for Korg's intuitive oscilloscope, part of the Nu:Tekt range. Surprisingly useful as a tool for visualising sounds, dialling in synth patches and understanding how sound works.

Supplier's Notes:
The ultimate toolkit for the modern musician

The Nu:Tekt NTS-2 oscilloscope kit is a DIY multifunctional tool for musicians. Building on a 4-channel oscilloscope - monitoring control voltage (CV) and audio signals alike - NTS-2 also packs a flexible waveform generator, a spectrum analyser, and tuner functionality into a
build-it-yourself device which fits in the palm of your hand!

The NTS-2 kit is compact and easy to assemble with no soldering required, but don't let its size fool you - it packs a real punch!

It's an oscilloscope, tuner, FFT, and spectrum analyser that is accurate, intuitive, and incredibly useful. But that's not all - using its dual stereo IN, dual stereo THRU/OUT, and two separate OUTPUTs, you can wire it into your synth rig and use its dual waveform generators to give yourself an extra pair of oscillators or LFOs!

4 channel oscilloscope
FFT/Spectrum Analyser
Duel Waveform Generator
Tuner
Powerful connectivity

4 channel oscilloscope

With dual stereo inputs, you can visualise up to four signals at once, comparing and overlapping them with ease. A variety of display modes let you choose how you see your data, while the user interface is clear and quick, thanks to its dedicated menu buttons and clickable encoder knob, and 240 x 320 pixel 2.8" colour LCD screen. NTS-2 even has a powerful "Lissajous" mode - opening the door to creativity and making it possible to visualise widely available oscilloscope art, for extra fun with your device.

Dual Waveform Generator

A flexible Wave Generator mode provides 2 oscillators with dedicated outputs. Each oscillator can create a variety of waveforms - sine, square, triangle, sawtooth, pulse, and noise - whose shape and phase can be adjusted to suit many applications. These sounds can be used in the audio range or as control voltage sources, and they can be set to cycle continuously or act as one-shot impulses; that means you can turn them into LFOs, envelopes, triggers, and control voltage generators, as well as sound sources. Attaching the NTS-2 to any patchable synthesizer instantly expands its power.

FFT/Spectrum Analyser

NTS-2 also comes with a dedicated FFT (Fast Fourier Transform) mode with a real-time spectrum analyser.

Tuner

This multi-functional utility kit wouldn't be complete without a precise and easy-to-use tuner with multiple display modes.

Powerful connectivity

The NTS-2 offers many ways to connect to your rig. Alongside its 4-channel input and dual waveform output features, its dual stereo THRU/OUT ports enable you to keep it wired into your system, rather than constantly plugging and unplugging cables. NTS-2 lets you maintain your signal flow at all times - even when powered off. NTS-2 maximizes portability and flexibility by using either batteries or a USB-C power supply.

Specifications

Dimensions: 12.9 x 7.8x 3.9 cm
Weight: 130g (not including batteries)
Power: USB type-C (2.0, 500mA max) or 2x AAA batteries (approx 2 hours running time)
Inputs: 2 x 3.5mm Stereo, +/-10V max
Outputs: 2 x Through Output: 3.5mm Stereo, 2 x Output: 3.5mm Mono, +/-5V max

Oscilloscope

Display modes: Single, Stereo (Input1L-INPUT1R, Input1L - Input2L, Input2L - Input2R), 4ch XY(Lissajous, 2ch)
Vertical: 10mV~5V/div, AC/DC MODE switchable
Horizontal: 50us~1s/div
Trigger: Auto, Rise, Fall, Single(rise), Single(fall)

FFT (Spectrum Analyser)
Input: mono (1L, 1R, 2L, 2R)
Frequency: 20Hz~20kHz

Waveform Generator
Wave type: sine, square, triangle, saw, noise, pulse, envelope
Frequency: 1Hz~10kHz, Hz/NOTE mode switchable, [1ms~10s,sec/BPM switchable(pulse, envelope mode)]
Output level: 10Vpp max, V/dB mode switchable

Tuner
Display mode: Needle, Meter
Input: Mono, Stereo (Input1L-Input1R, Input1L-Input2L)
Calibration: 410-480Hz

Notes: A compact Voltage Controlled Oscillator designed for generating SINE waves, Variable wave-SHAPEs, SUB-Octaves, Oscillator SYNC and Linear FM in the analog domain.

The Sub-Timbral Oscillator is the more subtle and melodic friend to the DPO's complex harmonic lattice.

Notes: As an Old Blood Noise Endeavors take on reverb, BL-37 Reverb Variable-Clock Effector is a new voice with a streamlined control set: a reverb both more immediate and more degraded than any other.

Thanks to its simple yet intuitive and interactive control set this modulated reverb can be quick and highly reflective or slow and stretchy with noticeable pitched undulations.

The sheer audacity of sound, to fill a room, to fill our heads, to fill our hearts. To act digitally as if tangible, as if these walls could talk, as if this were a real space and not a series of all-pass filters and modulated delays meant to capture the idea of somewhere we'd been before and something we'd done before and something we were before, as if. To give control over the whole thing, to simply stretch by hand the entire clock! It's a heck of a concept really.

BL-37 is a reverb pedal. It is lush but also ringy, and easily stretchable. It modulates, and sometimes that modulation feels certain, an obvious pitch bend, while other times it washes, simply a shimmering softening element. The control set for BL-37 is simple. A Clock slider sets the timing of the entire system - the sample rate that determines signal fidelity, the timing of the reverb, and the speed of the modulation within that reverb are all affected as the slider slides. Additional controls for Feedback, Mix, and Volume allow you to further craft the spatial voice in play here.

Notes: Ledges is a three-mode reverb with the ability to save and recall six presets and user-assignable expression control with loads of customizable options. From classic, standard reverb tones to undiscovered sonic reaches, it's everything you've ever wanted and needed out of a reverb.

The three switchable modes each deliver a unique blend of reverb, but are connected through a spectrum where the Room (R) reverb's longest setting is the Hall (H) reverb's shortest setting, the Hall reverb's longest setting is the Plate's (P) shortest setting, and the Plate's longest setting just keeps on going. The Room setting at its shortest achieves a small, boxy room sound that gradually gets bigger as you turn it up. As you increase the Hall setting, it morphs into a Cathedrals-style reverb that becomes really big, boomy and echoey with distant reflections. Turn up the Plate setting to get bouncy reflections that recycle and reverberate forever.

Ledges can go from an '80s slapback reverb mix to a bigger room spring reverb with the twist of the dials. The Mix knob lets you control how much your signal is affected, while the Length knob controls the size of the reverb. The Damping knob subtly mutes the high-frequency reflections of the reverb, which you'll hear clearly by adjusting your gain.

In addition to all of the features, there are six Presets available. Simply select a number with the switchable knob and then engage the Save on the center button and dial in your perfect sound. A quick Recall on the same button and you have all of your personalized reverb sounds with a single tap. You can assign an expression pedal to each of the three controls and then save it all in the presets.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 80 mA
Input Impedance: 1M O
Output Impedance: 100 O
TRS expression pedal wiring:
Tip: Wiper
Ring: +3.3V
Sleeve: Ground

Flexi-Switchr Technology

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Ledges is buffered bypass with tails. Power is required to pass signal.

Power

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. It is always recommend you use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Notes: ***B-STOCK: Without original box, product in perfect working order***


This monitor comes with free Studio One Prime and Studio Magic plug-ins.

Superior transient response:
In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the custom-designed AMT tweeter in the R80 uses an incredibly thin, folded Kapton membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and superior transient reproduction.

Wide, consistent stereo image:
An unfolded AMT tweeter diaphragm provides 8 to 13 times the projection area of a traditional 1-inch dome tweeter, enabling R80 monitors to provide a much wider stereo soundstage than traditional designs. At the same time, the R80 provides a very limited vertical dispersion, which helps to reduce reflections from the ceiling and desktop that can cause phase coherence issues. Because it's less subject to room-anomaly interference, the R80 reacts predictably and sounds consistent from room to room.

Transparent sound:
The R80 utilizes an 8-inch, custom-coated, woven Kevlar low-frequency driver. This rigid cone maintains a more consistent dispersion pattern across its frequency response range. Biamped and driven by a 150W Class D amplifierimaking the R series some of the most powerful monitors in their categoryithese monitors deliver an open, clear, and less fatiguing listening experience.

Have it your way:
You can customize the R80 in several ways. It's available with black or blue faceplates to fit your studio decor. With balanced XLR, balanced 1/4" TRS, and unbalanced RCA line-level inputs, it's easy to feed audio to your R80 monitors from a mixer, an interface, a media player, or almost any other line-level source. And R series monitors offer user-adjustable contour features for optimizing the monitors for your mixing space. This enables full integration into any studio environment.

Accuracy defined:
The R80's AMT monitor design provides lifelike sonic reproduction that will allow you to hear the room in your recordings. Its transparent sound and responsive transient reproduction makes it an ideal solution for anyone who is mixing high-resolution audio. Hear the R80 at your favorite PreSonus dealer.

Notes: The Backpack is made from high-quality materials, including a soft, durable Alcantarar handle, ballistic nylon straps and water-resistant exterior, it is rugged and hard-wearing.

It can accommodate a RODECaster Pro II, plus microphones, studio arms and other accessories, as well as laptops up to 16 inches. Ergonomic adjustable shoulder straps with back and chest support ensure absolute comfort, with exterior pockets and compartments providing additional storage.

RODE BACKPACK Features:

Designed to exact specifications of the RODECaster Pro II
Lightweight and highly durable
Accommodates microphones and accessories
Laptop compartment (16")
Water resistant
Interior dimensions: 495 x 304mm
18L internal capacity

Notes: Simple, powerful and high-quality voice recording solution, ideal for interviews, videography and podcasting. Clip on the lavalier microphone and record directly into the tiny battery-powered unit in high-quality 32-bit float resolution.

Supplier's Notes:
Small Appearance, Big Impact.

Videographers love the Tascam DR-10L Pro portable recorder with clip-on microphone as an easy and unobtrusive solution for capturing audio for video. Combining the clip-on convenience of a lavalier microphone with an ultra-compact portable recorder, this form factor solves many of the problems content creators often face. It's a superior solution for busy events such as weddings and on-location film shoots.

While traditional wireless microphone systems can pose workflow concerns, the rock-solid performance of a Tascam wired lavalier recorder is proven and assured. Simple plug-and-go operation also makes the DR-10L Pro an easy backup system for your typical voice recording setup.

The DR-10L Pro's 32-bit float recording technology lets you capture a whisper, a scream and everything in between with impeccable fidelity, ultra-low noise and no need to fine-tune gain levels. Support for wireless timecode sync with Atomos products, the ability to wirelessly control up to five recorders from the app*, plus long battery life and generous storage capacity make the DR-10L Pro ideal for professional applications.

*optional AK-BT1 required for app control and wireless timecode sync

Ultra-compact and lightweight, the DR-10L Pro is the perfect solution when stealth is a priority. Fitting in the palm of your hand and weighing just 65 grams, this recorder is easy to hide at film shoots, weddings, stage performances, and other projects where invisibility is crucial.

The included belt clip attaches easily and securely to clothing, allowing you to capture great audio without compromising your talent.

Using the DR-10L Pro's standard 32-bit float recording mode, two analogue-to-digital converters (ADCs) capture sound over an enormous dynamic range without distortion or excessive noise. This means that videographers can avoid having to discard recordings due to poor levels. With 32-bit float resolution, there's no need to adjust input gain levels, so you can set up faster and be confident that you're recording excellent audio in every situation.

The included TM-10L microphone captures clear, detailed audio while handling high sound pressure levels without distortion, making it the perfect lav mic for 32-bit float recording with the the DR-10L Pro.

Whether you're recording people at a wedding reception, a busy convention or a lengthy ceremony, the DR-10L Pro is ready for service as long as you are. There's no need to worry about changing batteries during recording: the DR-10L Pro personal recorder runs on just two AAA batteries for up to 24.5 hours*.

In addition, files are saved on the microSD card approximately every 20 seconds during recording to minimise the risk of data loss due to unexpected power cuts.

*Lithium batteries

With the optional AK-BT1 Bluetooth dongle, up to five DR-10L Pro recorders can be controlled wirelessly from iOS, iPadOS and Android devices using the free DR-10L Pro CONNECT app. The app allows videographers to check device status*, view the recorded waveforms in real time and create up to five presets. A preset can be applied to a single recorder or to all controlled units at once. You can also use the app to name devices for easy identification, for example "Bride", "Groom", and so on.

With the optional AK-BT1 Bluetooth dongle, the DR-10L Pro is ready to wirelessly synchronise timecode with supported Atomos products. Timecode allows videographers to perfectly align audio with video, even when there is no audio on the camera.

Timecode is critical for videographers when dealing with multi-camera video shoots, saving valuable time in post-production.

*Audio monitoring via app is not supported

Whether you're in a dark environment or outdoors in the sun, the DR-10L Pro's highly visible OLED display lets you confirm settings at a glance.

You can check your battery level, recording status, and input levels directly from the display, and all advanced functions are just a few button presses away.

The DR-10L Pro lavalier recorder has a headphones output for easy monitoring. You can listen to the input before or during recording, and also check the quality of your recordings immediately without having to first transfer them to a computer.

The DR-10L Pro comes bundled with a free version of RX Elements, a groundbreaking audio repair and noise reduction tool from iZotope. RX Elements gives videographers powerful audio restoration capabilities that need to be heard to be believed, from seamlessly removing coughs and background noise to reducing wind roar and ambient noise. Live video shoots for weddings, on-location interviews, and documentaries can present countless post-production challenges, and RX Elements gives videographers the tools they need to overcome them.

Specifications

Storage media and file formats

Recording media: microSD card (64 MB - 2 GB), microSDHC card (4-32 GB), microSDXC card (64-512 GB)

Recording and playback formats:
WAV: mono/poly (BWF format), 44.1/48 kHz, 16-bit, 24-bit, 32-bit float
MP3: 44.1/48 kHz, 128/192 kbit/s (recording) 32-320 kbit/s (playback)

Analogue audio inputs and outputs
Microphone input: 3.5-mm mini TRS jack (with screw lock)
Maximum input level: -11 dBu
Gain range: 7.5-38 dB
Input impedance: +/-2 kO
Included microphone: TM-10L
Sensitivity: -42 dBV/Pa
Maximum sound pressure level: 115 dB SPL
Supply voltage: 2.3 V
Analogue output (Headphones jack): 3.5-mm mini stereo jack (dual mono audio output)
Maximum output power: 10 mW + 10 mW (THD =0.1 %, 32 O)

Audio performance
Frequency response (input to recorded data): 20 Hz - 20 kHz, +0/-1 dB
Distortion: 0.01 % (1 kHz, input level -21 dBV)
Dynamic range: +/-105 dB

Power supply and other specifications

Power supply
2 AAA batteries (alkaline, NiMH or lithium rechargeable, sold separately)
USB bus power from a computer

Power consumption (batteries): 0.3 W (maximum)
Current consumption (USB bus power): 0.1 A (maximum)
Dimensions (W × H × D): 53 mm × 51 mm × 21 mm (excluding protrusions)
Weight@ 65 g (with batteries), 43 g (without batteries)
Permissible operating temperature range: 0-40 -C

Battery operation time
Conditions: WAV recording at 48 kHz, 32-bit float, mic connected, headphones not connected, limiter off, mono file, continuous operation, in hours:minutes (JEITA CP-2905)
Alkaline battery (Evolta)
16:30: No Bluetooth connection
16:00: Bluetooth connection

NiMH battery (Eneloop)
11:30: No Bluetooth connection
10:30: Bluetooth connection

Lithium battery (Energizer Ultimate Lithium)

24:30: No Bluetooth connection
23:00: Bluetooth connection

Note: Operation times may vary depending on the recording media being used. Reduced battery life when using headphones.

Notes: Colortones SPRING REVERB II is an expressive, analogue voiced, vintage reverb engine hosting 3 versatile recreations of classic Reverb Units together with 2 independent modulation filters - Vibrato and RotoTrem.

Reverb Modes

STUDIO - Modern 90's Rack Reverb - A Warm and Natural studio reverb

TANK - 70's Electromechanical Reverb Tank with bright, wet acoustic room reflections

ECHOVERB - Based on the 90's Princeton PT2399 Echo Chips with pronounced delayed reflections/echoes.

The MOD knob adds an additional depth control for subtle Vibrato and RotoTrem FX adding a spatial dimensionality to the acoustic characteristics of the Reverberation.

Spring Reverb II captures the essence of iconic Reverbs while adding its own sonic characteristics. Whether you're looking to add a subtle touch of reverb to your playing or create expansive soundscapes, the SPRING REVERB II pedal is the perfect tool to take your playing to the next level.

Controls

Reverb Mode Switch

Select between : Classic 80's Studio Rack, 70's Tank, EchoVerb

Decay

Adjusts the decay time of the reverberation tail

Blend

Adjusts the Mix / Depth of the reverb effect with the dry signal. Noon / 12 O'Clock is 50/50 Wet Dry Mix, beyond noon edges toward a wet only sound

Tone

Tilt EQ style reverb tone control. Does not effect the dry signal tone. Noon / 12 O'Clock is unity

Mod

Adjusts the Depth of the vibrato like modulation within the Reverb engine, adding complex harmonics and spatial depth

LEDs

The Left LED indicates INPUT CLIPPING and will illuminate when the input signal is too hot. It also indicates when the SECOND LAYER of knob functions is active

Bypass LED indicates when the effect is active

Bypass

A short tap on the Soft touch footswitch activates True Bypass.

A Long press (500ms) tap will initiate the Layer 2 controls

Secondary layer controls

Micro tune delay time - EchoVerb mode only

Controls the master Speed/Time for the delay in the background of the EchoVerb Reverb engine

Boost

Allows for -+6dB output Boost. Noon is Unity

RotoTrem speed override

Controls the master Speed/Time for the RotoTrem Modulation. Add just a little to expand the depth of the Reverb or more to get a faster modulation

RotoTrem depth

Adjust the amount of the RotoTrem applied post Reverb.

Tech Specs:
True Bypass
Current Draw: 145mA
Input Voltage: 9V DC (center negative)
external power supply not included

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Crystal-clear clock-synced delay for loop up to 90 seconds, echoes, sound-on-sound, Karplus-Strong etc.

Features:
Loop or echo time is synchronized to a clock
87 seconds of delay/loop time maximum
48kHz/24-bit sampling rate, loop recorded at 16-bit (24-bit optional)
Extremely quiet, low noise and low jitter design
Tap tempo button and clock Ping input set the basis for one "beat"
Delay/loop time set as a number of musical beats (or fractions of beats) using the Time knob, switch, and CV jack
Sample-accurate clock output for perfect synchronization
Loop clock outputs for each channel
Time switches change range of Time knob from 1/8th notes up to 32 bars
Digital feedback, up to 110%
Delay Feed control, independent of dry/wet signal mix
Infinite Hold mode disables recording input and fixes regeneration at exactly 100%
Reverse mode plays memory contents backwards
With an infinite loop locked, knobs or CV can "window" around memory, by shifting the loop
Trigger inputs for toggling Infinite Hold and Reverse
Send and Return for applying effects to feedback with external modules
CV jacks to control Time, Level, Feedback and Dry/Wet Mix
16HP Eurorack module

Specs:
48kHz, 24-bit low-noise hi-fidelity
Up to 90 seconds of loop time
16HP
+12V: 110mA
-12V: 45mA

Included with the Looping Delay:
16-to-16 pin power cable
4 x M3 Knurlie screws

Notes: ***B-STOCK: Product has light surface marks/scratches, but otherwise in perfect working condition***


At 84hp wide the NiftyCASE isn't super tiny or super huge, in fact, it's just right for all of the cardboard boxes bought to ship it to you in. Aside from the 84hp width NiftyCASE features ample +12v -12v and +5v power for your modules. It will also take Din MIDI from any DIN MIDI device and USB MIDI from your computer and turn it into eurorack compatible CV, gate, mod, and clock.

MIDI to CV, gate, clock, and mod

It's all built into the case. Make your instrument and don't waste precious hp (space for modules) on power and MIDI tools. you can plug NiftyCASE into your computer via USB or 5pin MIDI DIN device and send it MIDI. It will convert it into CV, gate, mod, and clock. Sequence with your DAW, jam with your controllers, or do something wacky, NiftyCASE has got you covered.

Power

Built-in power saves space for more of your modules, and keeps things good and easy.

As is, you can plug up to 10 modules into NiftyCASE's 10 gang flying bus that provides a peak 1500mA of +12v, 500mA -12v, and 500mA +5v, covering all industry standard power requirements

Specs:
Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5(off = 0 on = 4.65)
Voltage output gate 2 - off =0 on =5(off = 0 on = 4.65)
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4" ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB

Included in the box:

NiftyCASE
NiftyCASE switching power supply with blades for NA, EU, UK, and AU

* Please note that the right and left sides of NiftyCASE fit very flush. It is recommended to favour a module with a pcb 1mm or more narrower than it's front panel for use on the left and right sides of the case (this amount or more of tolerance is fairly common on many modules).

** The NiftyCASE power supply is designed only to power modules that are being used in the NiftyCASE. Modifying the case or using it otherwise to power external cases & external modules is not advised.

Notes: Entry-level model in the FGDP range, billed as the ultimate finger drum pads. The portable, rechargeable FGDP-30 features a built-in tone generator and speaker, all controlled by outstandingly responsive pads arranged in an ergonomic format.

Supplier's Notes:
The ultimate finger drum pad

With ultra-sensitive Pads in an ergonomic layout perfect for finger drumming, the FGDP features a Tone Generator, internal speaker, and rechargeable battery that make it a true all-in-one instrument that you can play anywhere. Let your fingers make the rhythm!

Made for finger drumming

Thoughtfully designed layout and Pads for the ultimate finger drumming performance. From sampled acoustic drums that sound like they're right in front of you to powerful electronic sounds, beloved and curated by top professional artists, covering a wide range of genres. Yamaha promises uncompromising performance.

Optimised layout

Introducing a distinctive Pad layout meticulously designed for optimal finger drumming by prioritizing ergonomic comfort.

With the FGDP, you have the freedom to assign Voices to Pads according to your creative vision, but at Yamaha, we recommend the 3-finger style. Harness the power of your thumb for the kick drum, rely on the enduring middle finger for precise hi-hat control, and let your dexterous index finger bring to life the delicate nuances and intricate phrases of the snare.

The home position enables you to effortlessly execute fundamental rhythms, like 8th notes using just one hand. You can use your other hand to play on the other symmetrically laid out pads to unleash captivating back beats in 16th note or double kick styles.

Equipped with an ample number of Pads perfectly suited for finger drumming, the FGDP empowers you to deliver your finest performances, setting itself apart from conventional Samplers and MIDI Pads.

Expressive precision

Featuring cutting-edge Pads designed to capture every subtle nuance, the FGDP ensures that no detail goes unnoticed. With the powerful combination of the internal Tone Generator, you can deliver delicate performances encompassing ghost notes, impactful accents, flams, and lightning-fast rolls. Moreover, the Pads support Aftertouch, enabling unique drumming techniques such as cymbal choking by applying pressure to a Pad while holding it pressed. With the FGDP, your drumming possibilities are limitless.

Specifications

Size/Weight

Dimensions
Width: 223 mm (8-3/4 in)
Height: 49 mm (1-15/16 in)
Depth: 195 mm (7-11/16 in)
Weight: 1.0 kg (2 lbs. 3 oz)

Packing Box
Width: 282 mm (11-1/16 in)
Height: 108 mm (4-1/4 in)
Depth: 244 mm (9-5/8 in)

Pad section

Drum Pads: 18 pads
Number of Trigger Settings: Preset 12
User: Preset overwrite
After Touch: Polyphonic, Channel

Control Interface
Voice Guide: English

Tone generator
Tone Generator AWM2

Maximum Polyphony: 64 notes
Drum kits: Preset: 39 Kits, User: Preset overwrite
Voices: 1,212
Kit Edit: Yes (only some parameter)
Effects Reverb: 11, Chorus: 10, Variation: 23, Speaker EQ: 5

Click
Tempo: 30 to 300 BPM, Tap Tempo supported.
Beat: 1 - 16
Others: Patterns (1/4, 1/4T, 1/8, 1/8T, 1/16, 1/16T, Clave)

Functions

Registration Memory

Number of Buttons: 2
Preset: 1 Bank, User: Preset overwrite

Amplifiers and Speakers
Amplifiers: 2.5 W
Speakers: 4 cm × 1

Other

Connectors
Headphones: Headphones/Output (Stereo mini jack x 1)
AUX IN AUX IN (stereo mini jack × 1)
USB: USB TO HOST (Micro B)

Power Supply
Power Supply: USB power adaptor 5 V/1.5 A or greater USB BC specification compatible products (Sold separately)
Internal Battery: 1,400 mAh, 4.5 Wh 3 hours
Power Consumption: 4 W

Accessories
Included Accessories: Owner's Manual, USB cable

Notes: Eurorack is a synthesist's toy chest. Stompboxes are a guitarist's toy chest. Each industry offers a seemingly infinite variety of products that enable musicians to build systems unique to their needs and to create a signature sound. Each is also somewhat addictive. Rare is the musician who doesn't eventually need a larger toy chest to house the accumulated toys.

Fortunately for the budget-conscious musician, Eurorack modules and stompboxes have always existed in separate worlds - someone whose Eurorack system consumes an entire wall in their home is usually not the same person whose pedalboard now requires a dedicated roadie just to transport it to the gig.

Intellijel's Stomp removes the barrier between Eurorack and stompbox. It provides the modular synthesist with a portal to stompbox nirvana, and the guitarist with a wormhole to the sonic manipulations of Eurorack modules.

Stomp enables the modular synthesist to interact with the impressive assortment of delays, choruses, flangers, phasers, fuzz boxes, tremolos, wah-wahs, amp simulators, compressors, and pitch shifter pedals available to guitarists. If your effects pedal is adorned with an expression pedal input, Stomp supports that too, and even features a built-in LFO to modulate your pedal's expression input. Need something crazier? No problem. Simply patch any modulation source from your modular system into the expression control jack to override the built-in LFO.

Conversely, guitarists can plug their guitar directly into Stomp's RETURN jack, giving them access to the myriad filters, ring mods, wavefolders and - most importantly - the near-infinite CV modulation delights inherent in Eurorack.

Features:

Robust Neutrik 1/4" TS connectors for the SEND/RETURN and TRS for the Expression interface
Signals arriving at Stomp's RETURN jack pass through a Class A triode emulator, allowing for some tube-like overdrive at high gain setting.
Stomp is more than just a simple level shifter - it's also an impedance converter, which provides proper drive and loading for any FX pedals or instruments you connect.
Separate gain controls on both the SEND and RETURN. This enables you to adjust the level of any audio being sent to the FX pedals as well as any audio coming back into the modular. Not only does this allow you to optimize the signal-to-noise ratio, but by significantly boosting the RETURN level, you can achieve some pleasingly overdriven tones.
Supports both Instrument and Line levels via a front panel switch.
Use Stomp's RETURN circuit as a "direct box" for connecting any instrument.
The high input impedance of the RETURN circuit allows it to be used as a piezo pickup preamp for acoustic instruments.
Use Stomp in the studio as an active "re-amping" device to play pre-recorded tracks back through guitar amplifiers or pedals.
All inputs are protected for minimum RF interference.
Return signal can be phase inverted for use with those pedals or effects types that invert phase.
Low MIX output impedance for driving long cables, lower noise, and minimum interference from outside sources.
The Expression Pedal Output converts analogue CV sources (or the internal LFO) into an output compatible with most stompbox Expression inputs.

Size: 8HP
Depth: 35mm
Power: 47mA @ +12V 13mA @ -12V

Notes: Flexible Eurorack signal paths under gate or trigger control: that is the basic principle behind Route 4. Consisting of a pair of complementary routing sections, it grants access to a new level of signal routing options.

The module's top section is a 4-to-1 router. Any of the four signal inputs may be selected to be mixed into the section's output, as determined by the control inputs.

Control can either be gate or latch driveniin the latter case, the signal inputs are toggled on and off by received trigger pulses. Meanwhile, the solo/multi switch determines whether the inputs are exclusive, or if multiple may be active at the same time.

With each input socket biased by a +1 V precision voltage source when left unused, gate or trigger controlled transposition of pitch sequences becomes a breeze.

On the bottom, the 1-to-4 router provides the same feature set, with a single input being routed to up to four outputs and normalisation between the sections adding some patching convenience.

All signal paths are designed for use with any Eurorack signals, whether they be control voltages, audio or gate streams. Visual feedback is provided by 10 responsive LEDs, continually displaying the status of the routers.

With Route 4, an 8 HP super-flexible analogue mixing and routing powerhouse has arrived to fuel your patching imagination. The ability to redirect signals within a modular system on the fly, with an unparalleled level of control, is sure to excite even the most seasoned patcher.

8 HP | +12: 35 mA, -12: 20 mA

Notes: Introducing a limited edition re-release of this iconic electronic instrument in a modular format.

This limited edition of 75 units is a tribute to the pioneering work of Dutch musician and instrument maker Michel Waiswisz (1949 - 2008), who first invented the Cracklebox with Geert Hamelberg in the late 1960s.

The Cracklebox was a small, handheld device designed as a way to explore new sonic territories. It was one of the first electronic musical instruments to use circuit bending techniques in the creation of electronic music. It allowed musicians to manipulate and control electronic circuits in real-time, creating a wide range of unique and experimental sounds. He used a circuit from a toy piano as the basis for the instrument, and then added a series of touch-sensitive pads that were connected to the circuit. When a player touched one of the pads, the circuit would be completed, producing a crackling sound.

The Cracklebox was probably the first commercially available portable self-powered alternative 'keyboard' analogue electronic instrument with inbuilt loudspeaker.

In the 1970s about 4000 Crackleboxes were built and sold by STEIM in Amsterdam.

Nowadays many people refer to the The Cracklebox as the archetype of 'glitch' or 'circuit bending'.

In the decades since its invention, the Cracklebox has continued to be an important and influential instrument in the world of electronic music. It is still in use today, and is considered a classic example of the potential of electronic music to create unique and innovative sounds.

This Eurorack recreation includes a 9v battery, swappable through the front panel, this allows to isolate the current flowing through the user's fingers from the Eurorack frame PSU, protecting the user from undesired electrical shocks. The internal speaker has been removed, a transformer has been used instead to isolate the output signal.

The output generated can be used as an audio, as a gate or a cv signal, when using it as a cv source, due to the specific qualities of the signal, users may want to send it through other modules as slews, sample and holds, quantizers to tame/control it's peculiar cv output.

Controls:

- The module features an on/off switch to turn off the 9v battery (remember to turn it off when you turn off your Eurorack system).
- A Power Starve knob, reduces the 9v voltage feeding the circuitry changing it's overall timbre/pitch
- An Output Gain knob to control the output volume.
- A Boost switch to add more presence to the signal.

Tech Specs:

12HP
5.5 cm deep
20mA +12V
20mA -12V
9v battery required

Notes: ***B-STOCK: Slight dent om the edge, otherwise in perfect condition***


VCO:

- Tune: manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
- Oct: range switch -1 / 0 / +1 octave
- Mod: modulation depth (attenuator wired to the Mod. socket)
- Dest: switch that is used to address the modulation to frequency modulation (position FM) or pulsewidth modulation (positon PM), in centre positon no modulation
- PW: manual pulsewidth control for rectangle waveform, PW can be also modulated by the Mod. input as mentioned above
- Wave: waveform switch (sawtooth / off / triangle), the sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW or fully CW)
- 1V/Oct. (socket): external CV input for VCO frequency (1V/octave)
- Access to internal bus CV (via jumper, optional, please remove the bus jumper if this feature is not used to avoid unwanted frequency modulation as then the unused CV line of the bus works as a kind of antenna)
- Triangle core VCO, frequency range about 32Hz ... 8kHz

Balance unit:

- The balance unit is made of two VCAs which are controlled by the sum of manual Balance control and the balance CV input in the opposite direction.
- The audio input of VCA1 is hard-wired to the VCO output, audio input 2 is connected to the socket Ext.In.
- The output of the balance unit is used as audio input for the VCF
- Bal.: manual balance control, fully CCW the internal VCO is used, fully CW the external signal (Ext.In) is used, at centre position both signals have about the same level
- CV Bal.: CV input for balance (range about 0...+5V)
- Ext. In: external audio input for VCA2, about 5 Vpp level required for similar loudness as the internal VCO
- This socket is normalled to the internal VCO suboctave f/2 signal (rectangle with half the frequency), if no external signal is applied the suboctave signal is used as the second signal for the balance unit

VCF:

- 24 dB low pass
- Frq: manual frequency control
- FM1: frequency modulation depth (attenuator wired to the VCF FM1 socket, the socket is normalled to the internal Envelope signal and then FM1 controls the modulation depth of the internal envelope applied to the filter)
- FM2 (socket) : second CV input for VCF without attenuator (about 1V/octave), can be used e.g. for VCF tracking by connecting the same CV which is used also for the VCO frequency
- Res: manual resonance control (up to self oscillation)
- If the VCO is turned off (waveform switch = centre position, pulsewidth control = fully CCW or CW) and the VCF resonance is set to maximum the module can be used as a sine oscillator, the tracking at socket VCF FM2 is about 1V/octave (not as precise as the VCO but much better than most other filters)
- ~ 11 octaves frequency range (~ 10 Hz ... 20kHz)

VCA:

- Gain: manual amplitude control (initial gain), can be used to open the VCA without envelope signal
- VCA (switch): used to switch between gate and envelope as control signal for the VCA, in centre position the VCA is not controlled by envelope or gate
- Note: when gate is used the VCA is controlled directly by the gate signal (i.e. hard on/off), this may lead to clicking noise under certain conditions (especially with low VCO/VCF frequencies)
- Special control scale: exponential scale in the range from about -20dB to -80/90dB, linear scale from about -20dB to 0dB
- Remark: this special control scale results in a loudness behaviour that is a bit different from pure linear or exponential VCAs
- Out: audio output of the module (= VCA output)

Envelope:

- Gate (socket): Gate input (min. +5V), can be normalled to the bus gate signal by means of a jumper
- Att: manual control for Attack
- D/R: manual control for Decay/Release
- Env. (switch): used to switch between A/D, ADSR and A/R mode of the envelope generator, in centre position (ADSR) the sustain level is fixed to about 50%
- Envelope (socket): envelope output (about +10V)
- CVT (socket): CV input for time control, by means of two internal jumpers one can select which time parameters are controlled by the CVT input (e.g. A only or D/R only or A/D/R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question)
- Envelope LED display
- Attack time range: ~ 1ms ... 5 sec (can be extended by using the CVT input)
- Decay/Release time range: ~ 1ms ... 15 sec (can be extended by using the CVT input)

Notes: The Tone Science Chance Delay is a unique concept in Eurorack modules as it combines chance and randomness, with pulse delay and pulse conditioning. It is a collaboration between electronic musician/composer Ian Boddy and AJH Synth.

It can perform as a Chance generator, but is also capable of pulse stretching for Trigger to Gate conversion, pulse shortening for Gate to Trigger conversion, Gate Delay, Sub Bass Generation and also "divide by n" clock division.

There is a wide range of control and all functions can be operated manually from the front panel or can be automated using external CV voltages. Chance can range between 0 to 100%. The Gate out can be delayed by anywhere between from 0.5mS to 30 Seconds, and the output Pulse length can also vary from 0.5mS to 30 Seconds.

The TRIG push button allows manual triggering of pulses, also determined by the Chance control, and a green LED shows the output pulse status.

Includes a handy "Gate pass through" mode; when the Length control is set to zero the incoming pulse or trigger will still be determined by the Chance and Delay controls, whilst the outgoing gate length will be the same as the incoming gate length.

Compact 8hp form factor and very low power consumption make this an excellent addition to any Eurorack system.

Key features:

Chance, Gate Delay time and Pulse Length can all be set manually or controlled using external CV voltages.

The 'TRIG' push button allows manual triggering, and Chance will be applied to any manual triggering too.

Fast processing allows operation into the lower audio range, so it can perform sub bass generation on drone type sounds. In this mode the Length pot (or an external Length CV) can be used to change the PWM of the output waveform.

After the initial trigger pulse has been acted on, further incoming pulses are ignored until the current cycle has finished. This useful feature allows it to perform "divide by n" division on gate pulses, so it can be used for clock division, and the delay function can be used to add a "swing" away from the rhythm.

Gate pass through mode - if the Length pot is set to zero, then the incoming gate length is preserved, so in this case the gate has Chance and Delay time applied to it, but the outgoing gate length is the same as the incoming gate length.

By setting Chance to 100% and Delay to zero (0.5mS) it can be used as a Gate to Trigger converter, or a Trigger to Gate converter, depending on the Pulse length set with the LENGTH control. We can also use an external Length CV to shorten or increase the length of the output pulse in real time.

Fast and slow ranges for both DELAY time and PULSE length - Fast range is 0.5mS to 2 Sec and Slow Range is 2 Sec to 30 Sec.

Green status LED shows when the output pulse is high.

Front panel controls

Chance Control and CHA Input

This sets the probability of an incoming trigger or gate being passed through to the Pulse Generator circuit. The chance can be set anywhere between 0% and 100%.

The CHA input allows an external control voltage (CV) to control chance remotely. In this mode the Chance control acts as an attenuator for the incoming CV. With the Chance control fully clockwise a CV of +5V will give 100% chance, and lower CV voltages reduce the Chance accordingly. For example, a +2.5V CV will give a 50% chance. The attenuator function is useful if we are using higher control voltages of for example 0 to +10V. If we set the Chance control to the 12 o'clock position it would then halve the incoming CV signal, so in this case +10V will give 100% chance and +5V will give a 50% chance. Negative CV voltages are ignored and will be treated in the same way as zero volts..

Delay Control and DEL Input

This sets the delay amount that is applied to the leading edge of the incoming Gate or trigger received at the IN jack (or a press of the Manual Trigger button), assuming that the "Chance" has been determined to be positive. With the Delay Time switch set to FAST the Delay range will be from 0.5mS to 2 Seconds. With the Delay Time switch set to SLOW the Delay range will be between 2 Seconds and 30 Seconds.

The DEL input allows an external CV voltage to control Delay Time remotely. In this mode the Delay control acts as an attenuator for the incoming CV. With the Delay control fully clockwise a CV of +5V will give the maximum Delay time of either 2 Seconds or 30 seconds depending on the position of the Fast / Slow switch. Lower CV voltages reduce the Delay Time accordingly, so if we apply a CV of zero volts then we will get the minimum Delay time. The attenuator works on any CV patched to the DEL input in the same manner as described for the Chance control.

Length Control and LEN Input

This sets the length, or rather pulse width of the output pulse. With the LENGTH Switch set to FAST the pulse length can be anywhere between 0.5 mS to 2 Seconds. With the LENGTH Switch set to SLOW the pulse length can be between 2 seconds and 30 Seconds.

The LEN input allows an external CV to control Delay Time remotely. In this mode the Length control acts as an attenuator for the incoming CV in the same manner as the Chance and Delay controls.

Setting the Length control to zero invokes "Gate pass through" mode - in this case the incoming gate length is preserved, so the incoming pulse or trigger will still be affected by the Chance and Delay controls, but the outgoing gate length will be the same as the incoming gate length. Turning the Length control slightly clockwise will then invoke the minimum pulse length around control position 1, and further clockwise rotation will increase the Pulse Length as expected. This behaviour also applies to external CV's patched to the LEN input, where a CV of 0V will enable Gate pass through mode.

Fast / Slow mode switches

These switches allow the selection of Fast or Slow mode for Delay time and pulse length, so these ranges can be selected independently for Delay and Length. Fast range is 0.5 mS to 2 Seconds, and Slow range is 2 Seconds to 30 Seconds.

TRIG Switch

The TRIG push button allows manual triggering, and Chance will also be applied to any manual triggering, so depending on the setting of the Chance control, pressing the button has a chance of not doing anything! Holding the button down keeps the incoming gate high for as long as the button is pressed, however this is only really relevant in "Gate pass through" mode - normally only the leading edge of the input pulse is used.

IN - input jack

Connect your input here - a gate, output from an LFO, or even waveforms from a VCO. Any negative component of the input voltage will be ignored, so unipolar or bipolar signals can be used.

OUT - output jack

This outputs the binary pulse (or stream of pulses) that are generated by the Chance Delay circuitry. The gate low level is 0V and gate high level is +6V. The green status LED shows if a pulse is currently being generated.

Module Width: 8hp
Module Depth: 26mm (Including power lead)
Current Usage: 25mA Positive, 6mA Negative

Notes: Constructed with 100% aluminium die casting, this two-tier sleek and robust keyboard stand weighs a mere 3.06kg, making it an incredibly lightweight and portable option. Designed to support keyboards with up to 76 keys and weighing up to 60kg, it offers the reliability and strength for musicians on the go. Easy to set up and dismantle, this stand is a perfect choice for those looking to blend functionality with simplicity.

Features:
Maximum height: 1,300mm
Capacity: 69.8kg
Weight: 8.19kg
Includes: 1 angled base and 1 straight, 1 pair of 45mm straight arms, one pair of 38mm arms

Notes: Constructed with 100% aluminium die casting, this two-tier sleek and robust keyboard stand weighs a mere 3.06kg, making it an incredibly lightweight and portable option. Designed to support keyboards with up to 76 keys and weighing up to 60kg, it offers the reliability and strength for musicians on the go. Easy to set up and dismantle, this stand is a perfect choice for those looking to blend functionality with simplicity.

Features:
Maximum height: 1,300mm
Capacity: 69.8kg
Weight: 8.19kg
Includes: 1 angled base and 1 straight, 1 pair of 45mm straight arms, one pair of 38mm arms

Notes: A clever pedal design based on classics. Mix and match tone and distortion circuits from legendary Nobels ODR-1 Natural Overdrive and Ibanez Tube Screamer. Versatile stuff.

Supplier's notes:
Imagine the ability to combine the best and defining characteristics of different overdrive & boost pedals in order to create hybrid sounds no one has ever played through before. That is exactly what Keeley have engineered with the Noble Screamer.

It's a 4-in-1 pedal that gives you two very familiar drive circuits and two brand new amp-like overdrive and distortion tones. It's almost like pedal-modelling, except these are 100% analogue circuits, and you decide which tone-control or clipping-section you want to play through.

Toggle between battle-tested, classic overdrive effects or innovate your sound using new hybrid tones; let your ears be the judge. Even with all of these features, the pedal remains a user-friendly three knob overdrive. The innovation in the Noble Screamer doesn't end there; this new design features true-bypass or buffered, truly silent switching, on the fly. The Keeley Noble Screamer Overdrive and Boost is entirely manufactured at Keeley Electronics and is the first release in a new aluminium enclosure.

The Noble Screamer gives you two tone control circuits to choose from - a Broad Spectrum Tone Control or Narrow Focus Filter Control.

When the Tone Switch is up and in the OD Position you will hear a 'Spectrum' type of tone control that has the ability to go from a flat EQ to an EQ that has a boost in the treble and bass response. If it is in the TS Position you have a Low Pass Filter that rolls off the high frequencies only.

Diode Clipping

Also the pedal offers both styles of diode clipping - Hard and Soft Clipping: If the Clipping Switch is in the OD Position it features Hard Diode Clipping which is an edgier, more aggressive tone. When in the TS Position that uses Soft Diode Clipping, like a tube amplifier softly overdriven.

Buffered and True Bypass

The Keeley Noble Screamer features Keeley's Vitamin K Infused Buffer for noise free switching. Keeley have developed an amazing sounding buffer which not only makes your rig sound better, it gives you silent switching with no tone loss.

No more pops and clicks to distract from your music. If you want to turn that feature off and go back to true bypass, simply press and hold down the foot switch for two seconds and the pedal will switch to True-Bypass. This is great for players that want the effect of plugging directly into their amp when the pedal is off.

Alternatively, players that want a strong and clear signal even when the Noble Screamer is turned off, simply hold the stomp switch down for two seconds and the effect is back to Buffered Bypass. Enjoy truly silent switching and let your music be the only voice.

Made In The USA

Keeley design, engineer, and manufacture the Noble Screamer in Oklahoma City. Everything about the Noble Screamer is geared towards the professional musician and their quest for an inspiring tone when the performance demands it. From the inside of the pedal and its meticulously built circuit boards and metal construction audio jacks to the outside of the effect its newly fabricated aluminium enclosure; Keeley make guitar effect pedals to be finely crafted musical instruments.

Notes: Part of the excellent Eris range, the Studio 8 is PreSonus's eight-inch two-way studio monitor, offering solid performance all the way down to 35 Hz and crystal clear reproduction thanks to 1.25-inch silk-dome tweeters and Elliptical Boundary Modeled waveguides.

Supplier's Notes:
With a smooth, accurate frequency response; powerful amplification with tons of headroom; and Acoustic Tuning functions that ensure you get the best sound, it's no wonder that Erisr-series studio monitors have been a runaway hit since their introduction. Building on the reputation of its award-winning predecessors, the Eris Studio 8 is a substantial update that delivers richer low-end and more controlled high-frequency response, reproducing every detail in your recordings with a natural sound unparalleled in its class.

Designed for superior performance in both home studios and professional mix rooms, the Eris Studio 8 features a custom-designed EBM (Elliptical Boundary Modeled) waveguide that provides superior high-frequency response and wide 100-degree horizontal dispersion to create a broader sweet spot. Narrow vertical dispersion reduces reflections from your desk, and a 1.25-inch, silk-dome tweeter ensures snappy, accurate transient reproduction. An elegant new enclosure design improves the waveguide performance so you'll hear the finest details in your mix.

The woven-composite, 8-inch, low-frequency driver offers Eris' signature tight, clear bass with plenty of punch. Its 140W of biamped power make the Eris Studio 5 more efficient than previous designs. The ported enclosure maximizes bass response and allows the Eris Studio 8 to reach down to an astonishing 35 Hz - with no subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything.

Features

8-inch woven composite, low-frequency transducer
1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer
100-(H) x 60-(V) EBM waveguide for a wide sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
140W, Class AB bi-amplification
35 Hz to 20 kHz frequency response
106 dB SPL (Peak, @ 1 meter)
Acoustic Tuning controls: HF (i6 dB, continuously variable); Midrange (i6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz)
RF interference, output-current limiting, over-temperature, transient, subsonic protection, and amplifier "soft start" feature (eliminates popping on power-up)
Internal power supply with IEC connector and power switch with on/off LED
Balanced XLR and 14-inch inputs and unbalanced RCA inputs

Set up your studio monitors for your room.

Erisr Studio 8 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonusr studio monitors, the Erisr Studio 8 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space, and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10 kO

Performance
Peak SPL: 6 dB (@ 1 meter)

Speakers
Crossover frequency: 3.5 kHz
Coverage pattern: 100 degree (H) x 60 degree (V)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, centre 10 kHz, continuously variable) Mid Frequency (+/-6 dB, centre 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 16.50 x 9.80 x 11.70 IN

Depth: 11.73" (29.8 cm)
Height: 16.5" (41.91 cm)
Width: 9.84" (25 cm)

Notes: The Foldiplier is a 4hp odd/even harmonics generator with 2 different oscillating feedback paths. The folding core of the design originates from the odd harmonics (middle)section of the Serge Wave Multiplier. But the Foldiplier adds voltage control over the symmetry and offset as well as a switch for feedback, jumper selectable between, a transistor based oscillating fuzz inspired by the Hemmo Bazz Fuss with a lot more low harmonic content and a passive oscillating half wave rectification circuit with more high harmonic content. When these feedback oscillations mix with an incoming waveform some unpredictable and unique nonlinear timbres can be achieved. The module can also be used as a no-input experimental oscillator with the feedback switch engaged. All diodes in the module are silicon.

The Fold knob controls the amount of times the waveform is folded in on its self (indicated by the red led window below the knob). The C.V. knob below is an attenuator for incoming control voltage corresponding to the Fold jack(indicated by the red led window above the jack, it only responds to positive voltage). So, the Fold knob acts like an initial amount of folding depending on its position. For example, with the Fold knob fully clockwise you can get even more folds with a control voltage in at the Fold jack. The Offset knob controls how much positive DC voltage(0 to 5v, clockwise) or negative(0 to -5v counter clockwise) DC voltage(indicated by the led window above the Offset jack, red for positive, yellow for negative) injected into the waveform via the Symmetry knob. With the Offset knob position at noon(0v) there will little effect from the Symmetry knob. The Offset jack is expecting +5v to -5v with knob position at noon to scan through the positive and negative voltage. The Symmetry knob controls the amount of negative or positive offset voltage(dependent on the Offset knob) mixed with the waveform(indicated by the yellow led window above the Symmetry jack). If positive voltage is mixed with incoming waveform more folds will occur on the positive troughs of the waveform, likewise, when negative voltage is introduced more folds happen on the negative troughs. This part of the circuit can also be broken down by thinking of the Offset as a voltage controlled crossfader swinging between positive and negative voltages into a VCA controlled by the Symmetry knob and jack. When a voltage is present at the Symmetry jack the Symmetry knob becomes an attenuator. The Symmetry jack only responds to positive voltage.

Width: 4hp
Panel Material: Double Sided PCB panel with Classic and Soulless
Reverse Power Protected
Current Consumption: +12v: 40mA, -12v: 35mA
Depth: 47mm or 1.75"
All through-hole build
Ships with M3 black nylon screws
Expandable: No

Notes: 8-input CV expander for Xer Mixa

Expando Expandi adds 8 freely assignable CV inputs to the Xer Mixa in just 4 HP. Connect up to two Expando Expandi to Xer Mixa for easy CV control over channel levels, pan, aux sends, and more.

Expando Expandi is not for use on its own and is currently compatible only with Xer Mixa.

Notes: 30 fully polyphonic pitch-shifting options under 15 square inches!

Offering a total of 30 pitch shift options and expanded controls, the Pico Pitch Fork is the next evolution in pitch shifting from Electro-Harmonix. The original Pitch Fork has garnered praise from all styles of player at every level and the Pico Pitch Fork brings even more features to the celebrated pedal in an impossibly small package.

The Pico Pitch Fork features 10 pitch shift intervals and three modes of pitch-shifting - Up, Down and Dual. Dual mode features specially paired pitch shift intervals to allow for more musical effects.

Controls on the Pico Pitch Fork are simple and effective. SHIFT selects the Pitch Shift interval. BLEND sets the wet/dry blend of the output mix while VOL adjusts the overall output volume. SWEEP controls pitch bend sweep time when toggling between bypass and effect and back to create automatic whammy effects. The Pico Pitch Fork's footswitch can operate in two modes: Latching and Momentary. Latching turns the effect on with one footswitch press and off with another while Momentary turns the effect on only when the footswitch is being held for instant bursts of pitch-shifting pandemonium.

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: Expanded Freeze in a lowball-sized package!

Meeting between the original Freeze and Superego pedals is the Pico Deep Freeze Sound Retainer. With the ability to freeze a moment in sound, the Deep Freeze can act as a sustain pedal for holding chords and notes as backing for your playing or as a platform to manipulate your tone into new sounds impossible with a normal guitar. In addition to the original Freeze's abilities, the Deep Freeze features layering, adjustable attack/decay speeds, glissando, dedicated volume controls, and 3 modes: Latch, Moment, and Auto, making it powerful pedal punching well above its weight.

The Deep Freeze allows for instant sound freezing in three modes of operation. Latch freezes sound each time the footswitch is pressed until the effect is bypassed, while Moment mode freezes sound only while the footswitch is held down. Auto mode captured sound automatically each time it senses signal above its threshold for virtually foot-free freezes. These three modes make it easy to operate the Deep Freeze in a way that fits any playing style.

Controls on the Deep Freeze let you further tailor the operation of the effect. Separate DRY and EFFECT volume controls let you blend signals from subtle backing to 100% effect experimentation. GLISS adjusts the morph time between freeze sounds creating otherworldly soundscapes. The SPEED/LAYER knob adjusts either the attack/decay time of the effect in Moment and Auto modes, or the amount of layering possible in Latch mode which makes playing impossible chords possible!

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: Exceptional value from PreSonus's entry-level studio monitors, packing a surprising punch for such small speakers. Add the optional Eris Sub 8BT subwoofer for serious low-end power.

Supplier's notes:
Presonus' best selling studio monitors just got better! Eris 4.5 BT media reference monitors deliver studio-quality sound in an elegant, compact form factor that makes them ideally suited for bedroom studios, video production, and high-fidelity gaming setups.

With 25 watts per side of onboard power, the Eris 4.5 BT reference monitors pack a serious punch, while still delivering clear, accurate audio. The weave and nature of the Eris 4.5 BT's 4.5-inch woofer result in tight bass that you can feel, as well as cleaner overall sound. The one-inch silk-dome tweeter produces refined high-frequencies and is designed to radiate sound with a wide pattern, creating a large optimal listening area. Improved speaker voicing over previous designs delivers richer lows and a smoother crossover transition for articulate, accurate transient reproduction through the frequency range and a less-fatiguing listening experience.

A convenient front-panel knob sets the level of both the power amp and the loud, clear headphone amplifier, with its front-panel jack. With four types of inputs, including fast, reliable, stereo Bluetoothr 5.0 connectivity, it's easy to connect just about any audio source to your Eris 4.5 BT reference monitors. High- and low-frequency controls let you easily adjust your Eris speaker's frequency response to compensate for the acoustics of your space and create the most accurate sonic reproduction possible.

Need a little more low end? Add an Eris Sub8 BT to build a perfectly matched 2.1 sound system that fits almost anywhere.

Features

4.5-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
Fast, reliable stereo Bluetoothr 5.0 wireless input
50W, Class AB dual amplification
70 Hz to 20 kHz frequency response
100 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, 14-inch TRS inputs; unbalanced, 1/4-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel 1/4-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Comes with speaker wire, 1/4-inch TRS to stereo RCA cable, and stereo RCA to stereo TS cable

Built to match your room.

Unlike other home audio speakers that hype the bass at the expense of other frequencies, Eris speakers provide an even response throughout the frequency range, from bass to treble. This means you'll hear your favourite music exactly as artists and engineers intend it to be heard. High and Low Acoustic Tuning controls let you dial in the Eris 4.5 BTs precisely to your environment to further ensure the best sound possible.


Honest. Expressive. Powerful.

Like all PreSonus media reference monitors, the Eris 4.5 BT offers consistent, accurate listening. Their stylish design makes them a welcome addition to living rooms, compact home theatre setups, and gaming rigs, and their smooth and even frequency response ensures that your music - and everyone else's - will sound incredible.

Electronics

Voltage: 220-240V UK
Wattage: 25 Watts (Each Speaker)
Input impedance: 10 kO

Performance

Peak SPL: 100 dB (@ 1 meter)

Speakers
Crossover frequency: 2.8 kHz

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Low Frequency (+/-6 dB, center 100 Hz, continuously variable)
Monitor inputs: Bluetooth 5.0, 1 x Stereo 1/8", 2 x Balanced 1/4" TRS, 2 x Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 9.50 x 6.40 x 7.00 IN

Product depth: 7" (17.8 cm)
Product height: 9.5" (24 cm)
Product width: 6.4" (16.3 cm)

Notes: The Morphor Mixer - 5 Channel Amplifier is a flexible analogue mixer module that can find a home in every type of Eurorack setup.

Each of the five channels feature an attenuator knob and mute switch to allow for instant playability, for example in live settings.

Input signals can be AC or DC-coupled depending on your preferred setting.

The output stage also features an extra attenuation/gain stage that allows you to double the mixed signal. An additional master mute switch, clipping LED are nice-to-haves that complete this intuitive mixer module.

Weight: 102 g
Dimensions: 128.5 × 40.3 × 30 mm
Width: 8 HP

Notes: The Morphor Plectrum - Analogue BBD Pluck is the successor of Morphor's successful module. Now only 8 HP instead of 10 HP with additional CV-able feedback!

Plectrum is a high quality, fully analogue Eurorack module that can produce plucked string-like sounds. It is a compact all-in-one solution for generating amazing bass, acoustic guitar, percussion and other amazing sounds.

The module is based on the Karplus-Strong principle with a true analog audio path built with an authentic bucket brigade delay (BBD) circuit which is recognizable by its specific timbre. By using carefully chosen high quality components, this module has a rich, warm analogue sound.

Now being only 8 HP in width, you won't need a lot of space to get going and start creating some incredible sounds. If you're looking to fully sculpt the string-like sound, you can extend the internal Karplus-Strong loop by breaking out the signal and adding external modules like filters and/or FX modules to it.

Features

100% analogue
Karplus-Strong principle
Built with classic BBD chip
Break-out BBD loop
Internal/external loop switch
Trigger input
1V/oct input
Tune knob
Pitch modulation CV input
Feedback CV input
Colour CV input (i.e. internal loop LPF cut-off frequency)
Mono output

Specifications

Panel width: 8 HP
Panel height: 3 U
Module depth: 40 mm
Current draw: 12V : 40 mA | -12V : 40 mA | +5V : 0 mA
Dimensions: 128.5 x 40.3 x 40 mm
Weight: 259 g
Frequency Range: sub-audio range to roughly 800 Hz
Power Socket: 16-pin

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Eurorack is a synthesist's toy chest. Stompboxes are a guitarist's toy chest. Each industry offers a seemingly infinite variety of products that enable musicians to build systems unique to their needs and to create a signature sound. Each is also somewhat addictive. Rare is the musician who doesn't eventually need a larger toy chest to house the accumulated toys.

Fortunately for the budget-conscious musician, Eurorack modules and stompboxes have always existed in separate worlds - someone whose Eurorack system consumes an entire wall in their home is usually not the same person whose pedalboard now requires a dedicated roadie just to transport it to the gig.

Intellijel's Stomp removes the barrier between Eurorack and stompbox. It provides the modular synthesist with a portal to stompbox nirvana, and the guitarist with a wormhole to the sonic manipulations of Eurorack modules.

Stomp enables the modular synthesist to interact with the impressive assortment of delays, choruses, flangers, phasers, fuzz boxes, tremolos, wah-wahs, amp simulators, compressors, and pitch shifter pedals available to guitarists. If your effects pedal is adorned with an expression pedal input, Stomp supports that too, and even features a built-in LFO to modulate your pedal's expression input. Need something crazier? No problem. Simply patch any modulation source from your modular system into the expression control jack to override the built-in LFO.

Conversely, guitarists can plug their guitar directly into Stomp's RETURN jack, giving them access to the myriad filters, ring mods, wavefolders and - most importantly - the near-infinite CV modulation delights inherent in Eurorack.

Features:

Robust Neutrik 1/4" TS connectors for the SEND/RETURN and TRS for the Expression interface
Signals arriving at Stomp's RETURN jack pass through a Class A triode emulator, allowing for some tube-like overdrive at high gain setting.
Stomp is more than just a simple level shifter - it's also an impedance converter, which provides proper drive and loading for any FX pedals or instruments you connect.
Separate gain controls on both the SEND and RETURN. This enables you to adjust the level of any audio being sent to the FX pedals as well as any audio coming back into the modular. Not only does this allow you to optimize the signal-to-noise ratio, but by significantly boosting the RETURN level, you can achieve some pleasingly overdriven tones.
Supports both Instrument and Line levels via a front panel switch.
Use Stomp's RETURN circuit as a "direct box" for connecting any instrument.
The high input impedance of the RETURN circuit allows it to be used as a piezo pickup preamp for acoustic instruments.
Use Stomp in the studio as an active "re-amping" device to play pre-recorded tracks back through guitar amplifiers or pedals.
All inputs are protected for minimum RF interference.
Return signal can be phase inverted for use with those pedals or effects types that invert phase.
Low MIX output impedance for driving long cables, lower noise, and minimum interference from outside sources.
The Expression Pedal Output converts analogue CV sources (or the internal LFO) into an output compatible with most stompbox Expression inputs.

Size: 8HP
Depth: 35mm
Power: 47mA @ +12V 13mA @ -12V

Notes: The MMI Maxima is the final word in MMI technology. Beautiful gold patterns form gradients of touch sensitive surface areas, each connected to an input/output. Drag, rub, pinch or tap your fingers across to form connections, and create evocative and unique performances. Utilize the various pattern densities and shapes in your performance, or create installations with whatever conductive material is to hand.

Operation is easy: simply plug any audio, LFO, CV, trigger, gate, offset or clock into any of the inputs on the front panel, and connect one or several outputs to destinations in your system. The symbols near the sockets correspond to the shapes on the panel, and all that remains is for you to form the connection between the desired symbols with your hand, or any other conductive object you may have. Connect multiple at the same time to achieve liquid, gradual mixing, evolving rhythmic patterns, mixed LFOs and more. Furthermore, touch the pressure plates more firmly or in more dense areas to form stronger connections - in practice, this means a signal will pass with more or less intensity, based on the pressure you apply.

There are countless possibilities here: the shapes make it easy to memorize your patch, and the many inputs and outputs allow for enormous creativity. Eight inputs and one output? No problem. Maybe you want eight outputs sharing one input? Also no problem. Why not patch in an offset voltage, and then use the pressure sensitivity to sweep a filter with the offset patched into the filter resonance CV control? Or maybe create volume swells by patching audio into a VCA, or even an effect, for reverb or delay swells. Maybe you want to create chords, crescendos or chaotic and swiftly changing drum patterns?

Although practice helps, there are no rules for playing the MMI Maxima. Use it upside down or downside up, rack it, tape it to your body or drill it into your guitar and use it with the expression input on your pedals (yes, this is actually possible. Seriously.) With no external power needed, it makes an excellent performance companion for any system, big or small, modular, semi-modular or even not-modular-at-all.

Intended as a controller for musicians and non-musicians alike, the purpose of the MMI Maxima is to put emphasis on your performance and expression, rather than your competence at the ivory keys or dexterity at a drum pad. Let your hands, slices of pickled cucumber or other conductive everyday objects do the talking, through a combination of clever patching and expressive play - with the MMI Maxima, you have a performance tool unlike any other at your disposal.

The MMI Maxima comes in a custom case, and does not require external power to operate. Enjoy the Maxima either as a standalone controller, or rack it in your system if you desire.

Dimensions
30 HP
30 mm deep

Current Draw
Module does not draw current

Notes: The Herzlich 4x4 Switched Passive Matrix Mixer is a fresh dose of hot old school synth flavor right into your signal chain - inspired by the Buchla and Synthi matrix mixers of yore, the Herzlich 4x4 Passive Switched Matrix Mixer will give you all the joys of an old school matrix mixer, and none of the pesky conveniences of a modern one!

Looking for a super clean, powered matrix mixer that will treat your signals with velvet gloves and behave with mind-numbingly boring predictability? Then you've taken a wrong turn, and instead of finding the pristine tedium you sought, you have uncovered a sleeping beast, an uncut diamond the size of a bell pepper and an all-red rainbow all in one. No power needed, and a super slim profile for even the shallowest skiff user.

The Switched Passive Matrix Mixer will set your heart ablaze with its glorious commitment to happy accidents and unapologetic jank. With absolutely no electronics to rein in the monster that resides in its circuitry, you will be delighted and shocked as you turn the knobs and click the switches, to find channels that bleed gently into each other, pots that alter channels other than their own, and switches that may take your desire to open and close them as suggestions rather than commands.

You'll think you've fallen asleep in the pale glow of your DAW and awoken to a nightmare at first, but very soon, you will discover it is a creative dream. Step into the shoes of the composers of yesteryear, and discover how your unintended accidents mixing CV or audio turn into beautiful and unexpected compositions. Find beauty in the strange interconnectedness of the switches and pots, as you try to brave and tame them. Reach synth transcendence with the psychedelic potential of passive matrix mixing, and open your heart to the multitudes of possibilities contained with the power of 70s circuit design.

Dimensions
20 HP
22 mm deep

Current Draw
Module does not draw current

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Configuring a streaming setup from scratch can be a daunting task, particularly for users with little or no music production experience. The minimalist design of the AG01 takes this into account by combining a high-quality condenser microphone with DSP effects, a LOOPBACK function, flexible input connectivity, and a simple, intuitive mixer for stress-free streaming operation.

Simply connect to your computer or iOS/Android device along with the headphones of your choice, then set your levels and you've got a fully operational streaming station that can be up and running within minutes. If you're an aspiring live streamer that requires a compact yet comprehensive, high quality all-in-one solution, the AG01 is ready when you are.

In most streaming applications your microphone is likely to feature prominently onscreen so it is important for it to complement your overall vision. With a unique and iconic design that blends classic and contemporary aesthetics, the AG01 looks as good as it sounds, offering both black and white-based models to suit your preference.

In addition to the condenser microphone audio input, the AG01 is equipped with a mini stereo line input jack, and an upgraded 4-pole mini jack (TRRS) for smartphones that allows input and output. You can also add audio from devices connected via USB in LOOPBACK mode. Combined with these features, this microphone-type model can cover a wide variety of streaming styles that could not be achieved in the past without a separate mixing device.

The AG01's high-performance condenser microphone utilizes a cardioid polar pattern that captures your voice or musical instrument performance precisely, and converts it into high resolution audio (192kHz, 24bit) while blocking out unwanted ambient noise from the rear or sides.

The AG01 features high-quality DSP effects, allowing you to easily add COMP/EQ and REVERB to color and hone your audio and get the best sound possible to broadcast to your audience. What's more, these tools are processed by the internal DSP chip so there is no delay, making the AG01 particularly valuable for live streaming, when real-time accuracy is required.

You can also turn these effects off completely to capture pure, raw recordings of the AG01's condenser microphone for music/audio production that will be edited by an engineer later.

There are many situations in live streaming where you may need to make audio adjustments on the fly. The carefully configured physical controls of the AG01 respond to these needs providing a simple operating experience that won't detract from your live content or performances.

AG Controller offers two modes, "Simple" and "Detail," which allow users with varying degrees of audio engineering experience to easily and precisely check and adjust the AG's DSP processing from any Windows/Mac or iOS device connected via USB.

The AG01 can be easily placed on a desk or any flat surface with its dedicated stand, or mounted on a desk arm, making it adaptable to almost any environment.

It can also be used in combination with a mobile battery allowing you to take your fully functioning streaming station anywhere you like.

*For stable operation of the AG01, a power supply of DC 5V 900mA or more is required.

AG01 comes bundled with Cubase AI music production software, as well as WaveLab Cast for audio production and editing. The AG01 is also compatible with Rec'n'Share and Cubasis LE applications for iOS devices which are available free of charge from Yamaha and Steinberg to support and inspire your audio content creation.

Specifications

Microphone Unit: Back electret condenser type
Polar Pattern: Cardioid
Adress Type: Side
Frequency Response: 30 Hz - 20 kHz
Max Input SPL: 110 dB (THD - 1.0% at 1 kHz)
Sensitivity: -34 dB i 3 dB (0 dB=1 V/Pa, at 1 kHz)
Connector: USB Type-C

Input Channels
Microphone: 1 (Mono condenser microphone)
AUX: 1 - Stereo mini
Smartphone: 1 - 4-pole mini input/output (TRRS)
USB: 1

Output Channels
PHONES: 1 - Stereo mini
Smartphone: 1 - 4-pole mini input/output (TRRS)
USB: 1
Bus: 1 Stereo
Functions: MIC GAIN (HIGH / MID / LOW), MUTE button x 1, STREAMING OUT (MIC / INPUT MIX / LOOPBACK), MIX MINUS MIC (ON / OFF)

On-board processors
DSP: COMP/EQ, REVERB (SPX Reverb) *Detail is Controlled on AG Controller
USB Audio: 2 IN / 2 OUT, USB Audio Class 2.0 Compliant, Sampling Frequency: Max. 192 kHz, Bit Depth: 24-bit, Type-C
USB DC Power Input: 1 - Type-C, 5 V DC, 900 mA

General specifications
Power requirements 5 V DC, 900 mA
Power consumption Max. 4.5W
Dimensions: W: 116 mm (4.6") H: 281 mm (11.1") D: 118 mm (4.6")
Net weight: 1.2 kg (2.6 lbs)
Included accessories: USB 2.0 Cable (1.5 m), Quick Guide, Safety Guide, Wavelab Cast Download Information, Cubase AI Download Information
Others: Operating Temperature: 0 to + 40C

Notes: Morph across the spacetime spectrum.

Years in the making and the first of its kind, Cosmosis is a stereo, high-fidelity ambient reverb that allows musicians to tailor three original spaces-Theatre, Temple, and Cosmos-as well as manipulate them in real time. In addition to controls for the size of the reverb, wet/dry blend, and filtering, Cosmosis features a unique Morph function that allows musicians to alter their reverb settings in real-time by pressing the left footswitch. The three space algorithms found inside of Cosmosis are all-original and truly unique. Theatre puts the player in a variable room that ranges from cozy to highly reflective using multiple parallel short reverberators. Temple occupies a dramatic, large indoor space by implementing numerous long reflections in both parallel and series. And Cosmos creates an enormous spectrum of heavenly reverb derived from the harmonic content it's fed. The Morph feature found in Cosmosis provides a simple way for players to trigger a gradual change to various reverb parameters over a specified amount of time set by the accompanying Morph Rate knob. Players can set both "red" and "green" values on their Tone, Blend, and Size knobs, then engage the Morph footswitch to oscillate between the two reverbs at their desired rate. Any combination of knobs can be assigned to morph. Create elegant morphs for subtle movement or sweeping, cinematic morphs for dramatic sound design effects. Save up to four custom reverb presets, including morphing. Cosmosis runs on standard 9VDC power.

Knob-by-knob

Size: Sets the size of the reverb space.

Blend: Sets the balance between wet (reverb) and dry (clean signal)

Tone: Clockwise from noon, this control applies a high-pass filter, making the reverb sound brighter. Counter-clockwise from noon, this control applies a low-pass filter, making the reverb sound darker.

Morph Rate: Sets the time it takes for parameters to change between "red" and "green" values when the Morph footswitch is engaged.

Morph: Enable morphing for any combination of the 4 on-board knobs. Push to toggle through knobs, press and hold to select. Press and hold again to deselect.

Preset Select: Push to toggle through 4 pre-loaded presets, press and hold to select. To save a custom preset after making changes, press and hold. Presets can also be toggled and selected using only footswitches (see manual).

Space Select: Push to toggle through 3 available reverb spaces.

Three evocative spaces

The three unique space algorithms found inside of Cosmosis are entirely original and comprise a combination of primary source impulse responses, imagined reflections, and inspired mathematics. Theatre is a vintage-inspired small room sound ranging from cozy to reflective; Temple is a rich and flowing larger space featuring long reflections in both parallel and series; and Cosmos makes use of divine inspiration to create an enormous spectrum of harmonically-informed reverb. Kill the Size knob in any space to conjure a ghostly, full-wet "reverse" reverb effect.

Enter the world of cosmosis

A portal of such divine proportions was always missing in the Pigtronix universe. One day, traveling further than ever before into the outermost reaches of what he knew to be true, Marvin caught glimpses of refracted light and mist hovering in the atmosphere of a new, far-distant planet. This was the long-sought Cosmosis-a planet that takes in the sounds of the galaxy, sublimates them, and ushers them to the other side forever changed.

Model Cosmosis

Model name: Cosmosis
SKU: COS
Function: Stereo Ambient Reverb with Morphing
Category 1: Reverb
Expression: TRS Remote
Bypass: Buffered

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: High
Output impedance: 1k
Body

Length (in): 3.25
Width (in): 4.5
Height (in): 2.2
Weight (lbs): 1

Notes: Transpos lets you transpose three CV channel with a single source.

Adder:

The voltage of each CV input can be varied by plus or minus two octaves depending on the switch and the potentiometer of each channel. Transpos uses precision regulators: for example if we increase by a fifth with the switch on "+" we reduce it by a fifth when we pass on "-".

Transposer:

The 1V/o CV input will influence each of the three channels. By turning the CV potentiometer you can globally increase or decrease the transposition of the three channels at the same time.

Dimensions
8 HP
40 mm deep

Current Draw
70 mA +12V
70 mA -12V
0 mA 5V

Notes: ***B-STOCK: Box opened, product in perfect working order***


Erica Synths Modulator is an advanced modulation and pitched noise source with focus on rhythmic (but not limited to) compositions in mind. It features two identical syncable to the BPM LFOs/noise sources with selectable morphing waveshapes. LFO frequency can be manually adjustable, as well as they provide frequency divisions and multiplication in Sync mode. Each LFO has two outputs- main one and secondary one with adjustable phase, so you can create evolving modulations. Furthermore, LFOs can be linked to work at the same frequency and the first LFO has built in VCA to control output signal amplitude.

Notes: From the outset, KMA Machine's goal was to create the most flexible analogue upper octave pedal ever yet produced. Based on a highly refined and improved version of the Shriek circuit from KMA's venerated MOAI MAEA pedal, the MANDRAKE brings an even more robust and present upper octave to the sonic table. By combining that upper-octave might with a versatile, yet highly intuitive user interface, the pedal provides a ton of killer tonal options in a very modern and pedalboard-friendly package.

"The humanesque abomination, begat of the evils that once fertilised his empire of dirt, now senses the bleak emptiness of the air that surrounds him. In recognition of his harvest and the perpetual change to his existence, his mesmerising scream is both devastating and euphoric, so all those that encircle him are subdued from the aural toxicity that emanates from the disfigured effigy."

Octave up pedals (as used by so many legendary performers including Hendrix, Tony Iommi, Josh Homme, Billy Corgan, Jack White and so many more), can really give added bite to your sound. But often, many of these fun tools can be untamed and lead to nasty clashing overtones.

With MANDRAKE however, KMA didn't want to just make a one trick pony octave up device. The powerful and ultra-fast tracking Shriek circuit was expanded on with its edgy and fuzzy character that's reminiscent of many of the best vintage octave-up devices. To do this, a 2nd order Low-Pass Filter was introduced, a TIMBRE and individual Mix controls to KMA's well-regarded circuit to make it way more versatile in a single pedal. Let's look at those cool new things in more detail.

The FILTER control helps to tame your upper harmonics, as well as to improve tracking, letting you achieve unhinged, cutting and shrieking mayhem when the control is fully turned all the way to the left. While turning the knob in the other direction gives a more mellow and blooming synth-like texture. The FILTER section is also very useful for tailoring the upper octave effect to different instruments and pickups, where getting the right tone is not a "one size fits all" equation.

In addition, to enable the octave voicing in MANDRAKE to be sculpted exactly to your own personal taste, the TIMBRE control defines the amount of fuzzy gain present in the upper octave. This allows you to perfectly blend in the pedal's tonality with the rest of your signal chain. Turning the control fully counterclockwise, gives a slightly crunchy and percussive tone that's ideal for melodic arpeggio enhancements. While cranking the TIMBRE knob fully clockwise will transform MANDRAKE into a crushingly saturated doom-hammer, instantly ready to wreak havoc with each power chord you throw at it!

Topping off the features, the DRY and OCT+ controls allow the dry signal and effected upper octave to be mixed independently, for precise tonal balancing. This is especially handy when using MANDRAKE together with other dirt pedals or when you just want to retain the natural body and attack of your instrument.

Subtle descant or decimating octaval Armageddon? With MANDRAKE the choice is totally yours!

Notes: The Minicase by Flame is made of bamboo wood and is offered in a limited edition.

Modules up to a depth of 5.3 cm can be installed in the case. For example, the Fire Drum Synth Module and the Takt Rhythm Sequencer.

Technical data:

Module width: 56TE
Installation depth: 5,3cm
Outer dimensions: 30x15x6cm
6x 16pin Doepfer connectors for modules
Plug-in power supply with DIN connector:
110-230VAC 28W, with +5V/2,5A +12V/1A -12V/0,3

HP : 56

Notes: Psychosis is a high quality true stereo - 6 channel mixer eurorack module, that has the unique ability to pan an input signal, from left to right with a single control.

It is equipped with a set of 4 stereo effects - reverb, delay, chorus and flanger, all trimmed for the modular levels.

This module is an easy gateway into mixing multiple signals as the last part in your signal chain.

10HP.

Notes: Think of the MFD like a tiny DJ mixer: two stereo inputs, one stereo output, with the option to cue either input and crossfade between the two. A simple idea very well executed.

Supplier's Notes:
Inspired by DJ mixers, the MFD allows you to cue and crossfade between signals. Ideal for live performance as well as jamming out ideas in the studio.

Supplier's Notes:
The 'MFD' is a 2-channel stereo crossfader designed for live DJ-style mixing and jamming in Eurorack. Two mono or stereo inputs are mixed to a single stereo output via direct or voltage control. Additional Cue controls provide preview monitoring of either input pre-mix via dedicated Cue switches and an output.

Voltage control over the crossfade and DC coupling allow for further creative uses such as a high quality stereo VCA or as a mix processor for either stereo audio signals or CV.

The MFD is designed to have very low noise and cross bleed and employs equal power crossfading for smooth constant level blending between signal sources.

Features:

Two channel stereo crossfader with voltage control.
Approx equal power crossfading.
Cue output switches for direct monitoring of either stereo input (pairing well with HPO for headphone monitoring).
Can be used as a high quality stereo VCA.
DC coupled for use with both audio and CV.
Skiff friendly with reverse power protection.
Two year warranty.
Made in England.

Ideal For:

Smoothly blending and monitoring 'tracks' or 'scenes' during a live set.
High quality VCA use for stereo based sources.
Voltage controlled crossfading and mixing of both CV and Audio signals.
Other advanced uses including audio rate modulation, stereo panning effects and a CV controlled FX send.

Technical Specifications

Supply: +12V 70mA / -12V 70mA

Size: 6HP

Depth: 32mm

Notes: Nive Grad is a level shifter designed for simplicity. Two Eurorack signals can be attenuated down to pedal and line levels, and two external line or pedal signals can be amplified up to Eurorack level. Integrating a drum machine, external synth, effects processor, or guitar with your Eurorack system has never been easier!

Nive Grad uses 1/8" jacks to save HP. If you want to use 1/4" gear with your system, ask your modular supplier about mono/TS 1/8" to 1/4" adapters or adapter cables.

Nive Grad pairs well with Noise Engineering's Xer Mixa system mixer, but can be used in any Eurorack system.

Type: Universal drum synthesizer
Size: Level Shifter
Depth: .9 inches
Power: 2x5 Eurorack
+12 V: 25 mA
-12 V: 25 mA
5 V: 0mA
Nive - level - from Latin niveum

Grad - step or degree- from Latin Gradus

Notes: Nive Grad is a level shifter designed for simplicity. Two Eurorack signals can be attenuated down to pedal and line levels, and two external line or pedal signals can be amplified up to Eurorack level. Integrating a drum machine, external synth, effects processor, or guitar with your Eurorack system has never been easier!

Nive Grad uses 1/8" jacks to save HP. If you want to use 1/4" gear with your system, ask your modular supplier about mono/TS 1/8" to 1/4" adapters or adapter cables.

Nive Grad pairs well with Noise Engineering's Xer Mixa system mixer, but can be used in any Eurorack system.

Type: Universal drum synthesizer
Size: Level Shifter
Depth: .9 inches
Power: 2x5 Eurorack
+12 V: 25 mA
-12 V: 25 mA
5 V: 0mA
Nive - level - from Latin niveum

Grad - step or degree- from Latin Gradus