100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 100 on page 1 of 2
1  2  »
Cat: 557453 Rel: 19 Dec 14
 
Compact voltage controlled oscillator (VCO) module specifically designed for generating SINE waves
Notes: A compact Voltage Controlled Oscillator designed for generating SINE waves, Variable wave-SHAPEs, SUB-Octaves, Oscillator SYNC and Linear FM in the analog domain.

The Sub-Timbral Oscillator is the more subtle and melodic friend to the DPO's complex harmonic lattice.
Read more
 2 in stock $188.00
Cat: 557510 Rel: 19 Dec 14
 
Controller/analog sequencer module that is played by hand
Notes: Pressure Points is a controller module, an analog sequencer that is played by hand. Touching the gold plated copper wires (aka Touch Plates), you become part of the circuit, generating a gate signal (Gate OUT), a control signal proportional to the amount of pressure applied (Press OUT) and the 3 Tuned Voltages for the activated Stage.
Read more
 2 in stock $191.50
Cat: 557491 Rel: 19 Dec 14
 
Two channel low pass gate synth module
Notes: A two channel Low Pass Gate, providing simultaneous voltage control over amplitude and frequency content of a signal. It is in essence, a Voltage Controlled Filter Amplifier (VCFA) that has an extremely organic response to control signals. The Low Pass Gate is a classic West Coast synthesis circuit.

Revision 2 adds audio side-chain compression and expands CV generation and processing capabilities.
Read more
 3 in stock $192.00
Cat: 563674 Rel: 10 Mar 15
 
Voltage controlled logic & tap clock eurorack synth module with dual 3-input logic block
Notes: The Plog module comprises two programmable logic sections (select one of six different 3 input boolean logic types) as well as a toggle flipflop and data flipflop block. all four sections are linked together via specially planned normals.

This module was primarily designed as an interesting tool to be used with sequencers. you can derive complex rhythmic sequences from basic sparse sources (e.g. from a simple gate sequence or clock). by adding vc control of the logic types via some kind of cv source like a triggered envelope, lfo or sequencer you produce even more complex results.

Plog can also be used in many other creative applications including making interesting timbres and for self generating patches.
Read more
 1 in stock $189.96
Cat: 569583 Rel: 30 Jun 15
 
Dual analog VCA and 2-pole VCF, with digital control path - 12HP size
Notes: Streams provides two channels of extremely flexible signal dynamics manipulation.

Each channel consists of an analog voltage-controlled filter and amplifier (VCFA). The response curve of the amplifier section is continuously variable from exponential to linear. The amplifier gain is directly controllable from a CV input, through an attenuator. But what makes Streams truly unique is the multi-purpose EXCITE input. The signal routed to this input is analyzed by a micro-controller and translated into internal control voltages for the VCFA, turning Streams into a very versatile signal contouring tool:

Envelope generator
The EXCITE input can work as a trigger input, triggering an internal AD or AR envelope routed to the gain and the filter cutoff (in variable amount). With only 6-HP of space, you can shape an oscillator or noise source into a full-bodied sound.

Vactrol curve generator
The EXCITE input is processed by a digital model of a resistive opto-isolator (Vactrol), controlling the gain and the filter cutoff (in variable amount). The digital emulation allows the modification of properties of opto-isolators - such as response time - which are otherwise difficult to control. The virtual vactrol response can be either optimized for processing CVs, or triggers (for "plucked" sounds).

Amplitude and frequency content follower
The envelope and cutoff of the EXCITE signal is measured, and applied to the signal on the VCFA input.

Compressor/limiter
Streams' VCF is disabled, and the VCA is used to control the dynamics of the input signal. An intuitive control scheme allows the compressor to be used either for peak reduction/limiting operation; or for boosting signal levels with soft-limiting. The EXCITE input can be used as a sidechain.
Read more
 2 in stock $181.79
Cat: 569585 Rel: 30 Jun 15
 
Tidal modulator signal generator Eurorack synth module - 14HP wide
Notes: Tides is all about waves that go up and down, from minute-long cycles to audio rates... This module is Mutable Instruments' unique take on the looping AD envelope generator - pushing this well-known trope to unknown territories.

The core of the module is a digital asymmetric triangle function generator, which can be used in AD and AR modes (for envelope generation), or looping (as a VC-LFO or VC-DO). The triangle generator is followed by a wavetable waveshaper providing linear, exponential, logarithmic, sinusoidal, or arc-sinusoidal shapes for the A and D segments. Then, a second processor applies either a 2-pole low-pass filter to the waveform, smoothing its sharp edges; or a rubbery wavefolder, adding kinks and "bounces" to the waveform. Because Tides has been designed from the ground up to work at audio rates with minimal aliasing, and because all its parameters are under voltage control, it can be used as a unique self-contained synth voice.

Tides' advanced features include:

- Output level CV input (digital VCA).
- Dual outputs: standard unipolar waveform, and "double-shot" waveform with a positive spike during the ascent and a negative spike during the descent. At audio rate, both of them have a different sound.
- Accurate V/Oct tracking with straightforward calibration procedure.
- Freeze input to temporarily hold the waveform.
- Clock input to lock onto a multiple or fraction of a trigger sequence... or audio signal, PLL-style.

*For audio demos, please visit - http://mutable-instruments.net/modules/tides/demos
Read more
 More than 10 in stock $173.77
WMD Pro Output Module (synth module)
Cat: 580282 Rel: 30 Jul 15
 
Pro Output synth module with Low Distortion / Low Noise & High Headroom - 6HP wide
Notes: The WMD Pro Output is a simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear. It also includes a very high quality headphone driver.

Rail to rail opamps at the input stage allow for headroom above the typical eurorack levels of 20Vpp. The Pro Output can handle 23Vpp before clipping. Signals are attenuated down to the proper levels allowing for simple adjustment free connection to any type of device, professional or consumer.

The Pro Output is DC coupled through the entire signal path, including the headphone driver. This design eliminates coupling capacitors and the distortion they can cause.

Controls and I/O:

Input - The inputs are designed to accept any normal modular level. 10Vpp is the nominal operation level. The left input is normaled to the right side for mono operation. Inputs will clip at 23Vpp, giving enough headroom for any eurorack signal.

Phones/Line - The headphone driver connects to a 3.5mm stereo jack, and a 1/4" jack for whatever type of headphones you use. It can drive both simultaneously.

The headphone output level is internally limited to protect against accidental knob turns. Connect a couple of jumpers to the rear of the module to disable this limiting. This will allow the headphone amp to drive headphones extremely loudly, but still without distortion. Output quality remains the same regardless of the jumper settings.

With the limiting enabled (jumpers off), the maximum output is around -10dBV. With limiting disabled (jumpers on), the maximum output increases to pro level, about +4dBu.

Stereo - The Stereo (-10dBV) output is designed to interface directly with consumer level gear. Hook directly to sound cards, portable recorders, and speakers. It can be used as a second headphone output but will be loud.

+4dBu Bal - These two outputs (left and right) are high quality low impedance balanced line drivers. They are designed to drive long cables and to drive balanced transformer or transformerless inputs. Use these to connect directly to mixing consoles, mic preamps, or any other piece of professional outboard gear.
Read more
 2 in stock $190.98
Click for better price!
quote 580282
Cat: 561577 Rel: 15 Sep 15
 
Wavetable module with 21st century advanced wavetable engine with classic Waldorf wavetables included - 32HP
Notes: nw1 is our debut product for the popular Eurorack format. It includes an advanced wavetable engine with independent control of spectral envelope and noisiness - just like Nave.

Wavetable scanning is cyclic with optional modulation of travel speed, position, spectrum, and more besides. By providing the worshipped Waldorf wavetable set from the classic Microwave and Wave synthesizers, nw1 will enrich your Eurorack modular system as a potently powerful sound source. The nw1 sound engine also allows for onboard creation of user wavetables via time domain multiple foldover analysis. All you need to do is connect any sound source to the nw1 to transfer audio into a wavetable. Or use the integrated speech synthesizer to translate typed text into wavetables.

Wavetable synthesis is an extremely powerful sound source suited to producing all kinds of vivid metallic hues and digital clangorous tones. It can create organic, bell-like timbres, as well as spectacular-sounding scans through various waveforms with truly ear-opening results. It was almost impossible to create these kinds of sharp-edged, digital sounds back before the invention of wavetable synthesis in the late-Seventies.

Starting with the wavetable synthesizers of those days, a whole new sound palette left its imprint on so many hit records. Today, with Waldorf's neatly-sized nw1 Wavetable Module, this sound is readily available for the popular Eurorack standard - sounding just as pure, sharp, and massively destructive as it did back in the golden days of digital!
Read more
 3 in stock $169.53
Click for better price!
quote 561577
Cat: 569573 Rel: 23 Sep 15
 
Liquid filter Eurorack synth module
Notes: Ripples delivers a classic, big-sounding analog four-pole filter in a small 8-HP package, continuing Mutable Instruments' lineage of warm and tasty filters started by the Shruthi SMR4 mkII and 4-Pole Mission.

3 filter modes are available: 2-pole band-pass, 2-pole low-pass, and 4-pole low-pass.

Self-oscillation is available for all modes and produces a clean sine-wave on the LP4 output. Unlike many classic 4-pole designs, this filter does not suffer from "loudness drop" when resonance is increased. The resonance loudness compensation circuit brings a slight tone coloration reminiscent of the Roland SH/Jupiter filters, with a very round and "liquid" resonance.

The 4-pole low-pass output is additionally sent to a VCA. This makes Ripples a good "final stage" module for an inexpensive/space-constrained subtractive synthesis synth voice.

*For audio samples, please visit - http://mutable-instruments.net/modules/ripples
Read more
 More than 10 in stock $151.15
WMD/SSF Ultrafold Module (synth module)
Cat: 588817 Rel: 02 Oct 15
 
Voltage controlled wave folder synthesiser module - 6HP wide
Notes: ULTRAFOLD is a powerful voltage controlled wave folder.

The input drive and wave fold controls make up the heart of the design, providing warm saturation and additive harmonics to the input signal.

The wave shift control offsets the input signal to allow for asymmetrical folding - unveiling the subtleties in the distribution of spectral content.

The novel bipolar feedback control takes wave folding to a new level by returning the folded output to the input, thereby skewing the wave shapes for dramatic changes to the upper harmonics.

An auxiliary feedback input is provided to allow for insane folded FM sounds when another oscillator drives this input.

Power Draw: +30mA, -30mA. 6HP width. 25mm Depth.
Read more
 1 in stock $171.57
Click for better price!
quote 588817
WMD/SSF ADSR VCA Module (synth module)
Cat: 588820 Rel: 02 Oct 15
 
Multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA) synthesiser module - 6HP wide
Notes: ADSRVCA is a multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA).

This envelope generator is capable of producing a classic, gate driven Attack/Decay/Sustain/Release (ADSR) envelope as well as a self sustaining, looping Attack Decay (AD) and Attack Decay Release (ADR) one shot envelopes.

The integrated VCA eliminates the need for an external VCA module and can be used independently when an external control voltage is utilized.

The envelope controls the shape of the VCA’s amplitude response by default.

Power Draw: +36mA, -16mA. 6HP width. 25mm Depth.
Read more
 1 in stock $161.36
Click for better price!
quote 588820
Cat: 588824 Rel: 02 Oct 15
 
2 pole multi-mode filter synthesiser module - 4HP wide
Notes: MMF is a 2 pole Multi-Mode Filter in 4 HP. It has simultaneous LowPass, BandPass and HighPass filter outputs.

MMF will self oscillate into a nice sine wave and track 1V/octave. The Resonance is voltage controllable.

The PING input is for a gate or trigger, and generates a fast decay envelope with a nice sound, reminiscent of a vactrol filter, but without the vactrol. PING can normal to the FM jack, or go direct (switchable behind the panel).

The FM input is connected to an attenuverter pot to give you control over the signal.

Power Draw: +62mA, -24mA. 4HP Width. 25mm Depth.
Read more
 3 in stock $161.36
Click for better price!
quote 588824
Cat: 588826 Rel: 02 Oct 15
 
Delay synthesiser module - 4HP wide
Notes: DPLR is a delay module with two interactive delay lines, each with 750mS of delay time.

One input is split to two delays which share overall delay time (DELAY) and regeneration (REGEN). Side B has control over its delay offset (SPREAD) from side A.

Delay, Spread and Regen are all voltage controllable. Regen at max will echo indefinitely, and can create interesting noise swashes.

The pushbutton at the top taps through seven different crosstalk configurations (Regen isolated through ping-pong). Push and hold to change through four different Regen Filter settings from very bright to dark.
Read more
 3 in stock $158.30
Click for better price!
quote 588826
Cat: 739168 Rel: 09 Nov 15
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Introducing the HATS909, part of our new series of drum modules that brings those classic percussion sounds into the modular synth world, instantly turning your system into a self-contained music machine.

The HATS909 is the TR-909's original Closed and Open Hi-Hats circuits adapted for use in Eurorack modular synthesizer format and was tested to sound like a machine coming fresh off the assembly line back in the 80's Improving on the original, we have added some great new features that expand the sound palette of hats that can be produced with this small, powerful module.

The original TR-909 circuit is made with a combination of low-fi 6-bit sound samples that pass through a series of analog elements to provide envelope and filtering to the source sound. The HATS909 module allows for manual and voltage control of the sample's tuning, which provides anything from crushed hats and short ticks to the original sound and anything in between. A modulation switch allows you to tap a voltage control to either the tune input or the internal VCA for modulation with external control signals or for adding AM or FM synthesis in the audio range from external oscillators, other drum sounds, or just about any sound source. HATS909 also offers a switch for a direct tap to the output of the original sample, bypassing all other internal analog processing, giving you the pure source sound for synthesis any way you want with your own modules.

Just like the other drums in this series, the HATS909 high-powered output gain stage allows you to further harmonize the sound through distortion and clipping. On each gate input, we have designed a dual pulse-shaper circuit so you can trigger your HATS909 with trigger/gate signals from step sequencers, clock dividers, or any other pulse/clock sources.
Read more
 1 in stock $176.66
Cat: 593673 Rel: 13 Nov 15
 
Meta modulator synthy module designed to blend and combine two audio signals - 10HP wide
Notes: Evolved from the oscillator mixing section of Mutable Instruments' desktop hybrid synths, Warps is designed to blend and combine two audio signals. A variety of wave-shaping and cross-modulation methods - some of them emulating classic analog circuits, some of them purely digital - are provided by the module.

With Warps, the cross-modulated sound can be sculpted with control voltages along 4 dimensions: by controlling the amplitude and distorting the input signals, by smoothly scanning through the collection of modulation algorithms, and by adjusting a timbre parameter controlling the brightness/harshness of the modulated signal.

Since many classic cross-modulation effects work best when the carrier is a simple waveform - for example, a sine wave for ring-modulation or a buzzing waveform for vocoding - Warps includes a digital oscillator offering a handful of classic waveforms. This internal oscillator, which tracks V/Oct and supports through-zero FM, will replace the carrier audio input - freeing up one oscillator in your system for other duties!
Read more
 6 in stock $192.00
Click for better price!
quote 593673
Cat: 590435 Rel: 09 Nov 15
 
Percussion synth module with TR-909's original closed and open hi-hats circuits adapted for use in Eurorack modular synthesiser format - 8HP wide
Notes: Introducing the HATS909, part of our new series of drum modules that brings those classic percussion sounds into the modular synth world, instantly turning your system into a self-contained music machine.

The HATS909 is the TR-909's original Closed and Open Hi-Hats circuits adapted for use in Eurorack modular synthesizer format and was tested to sound like a machine coming fresh off the assembly line back in the 80's Improving on the original, we have added some great new features that expand the sound palette of hats that can be produced with this small, powerful module.

The original TR-909 circuit is made with a combination of low-fi 6-bit sound samples that pass through a series of analog elements to provide envelope and filtering to the source sound. The HATS909 module allows for manual and voltage control of the sample's tuning, which provides anything from crushed hats and short ticks to the original sound and anything in between. A modulation switch allows you to tap a voltage control to either the tune input or the internal VCA for modulation with external control signals or for adding AM or FM synthesis in the audio range from external oscillators, other drum sounds, or just about any sound source. HATS909 also offers a switch for a direct tap to the output of the original sample, bypassing all other internal analog processing, giving you the pure source sound for synthesis any way you want with your own modules.

Just like the other drums in this series, the HATS909 high-powered output gain stage allows you to further harmonize the sound through distortion and clipping. On each gate input, we have designed a dual pulse-shaper circuit so you can trigger your HATS909 with trigger/gate signals from step sequencers, clock dividers, or any other pulse/clock sources.
Read more
 1 in stock $187.92
Click for better price!
quote 590435
Cat: 584252 Rel: 15 Apr 16
 
12bit digital drum voice synth module with full voltage control and an analog EQ output path - 12HP wide
Notes: Dinky's Taiko' is a 12 bit digital drum voice with full voltage control and an analog EQ output path.

The drum voice consists of 3 parts; a digital noise source with controllable frequency and release time, a wavetable oscillator with start and end frequency settings together with a variable rate (and release time, and finally a mix and tone control for the audio output. All settings, bar the tone control, are both direct and voltage controllable.

The drum voice includes a trigger input as well as accent and choke trigger inputs to add further expressive and rhythmic control.
Read more
 4 in stock $192.00
Cat: 584259 Rel: 15 Apr 16
 
High quality quad linear voltage controlled amplifier (VCA) synthesiser module - 8HP wide
Notes: 'Tangle Quartet' is a high quality quad linear voltage controlled amplifier (VCA) providing individual level control of 4 signal inputs with both individual outputs and a combined 'mix' output (for non patched outputs) . Control signal inputs and associated attenuation controls allow for voltage control of signal levels. Control inputs are normalised to 5v thus providing manual mix control in the absence of control signals.

Technical Specifications:

Supply: +/-12V (Reverse voltage protection)
Current Draw: ~80ma
Size: 8 HP
Depth: 32mm (including power header)
Read more
 1 in stock $164.42
Click for better price!
quote 584259
Cat: 616167 Rel: 09 Jun 16
 
4 channel coltage controller signal polarizer synth module - 12HP wide
Notes: Blinds is a 4-channel voltage-controlled signal polarizer. Each channel consists of a polarizer circuit, also known as a four-quadrant multiplier. This circuit acts like a VCA, except that a negative control voltage will cause the output signal to be inverted, instead of being silenced. Blinds' outputs are daisy-chained, allowing adjacent groups of 2, 3, or all 4 channels, to be mixed together.

One can think of Blinds' as a voltage-controlled version of Shades, the control center for all the modulation CVs used in a patch. Many other uses are possible, though. For example, each individual channel can be used to scale/offset a CV; and with audio rate modulation signals, each channel acts like a ring-modulator, with massive potential for drones and feedback patches.
Read more
 3 in stock $151.16
Cat: 701602 Rel: 07 Jul 16
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Richter Noisering analog data resonator module:
Malekko is thrilled to offer the Richter NoiseRing in eurorack format. Sanctioned by Grant Richter of Wiard Synthesizer Company, this module is the same as the original Model 1210, only in 14hp eurorack format.
Read more
 1 in stock $177.71
Cat: 625059 Rel: 22 Sep 16
 
Mini Mod VCF Transistor Ladder Filter Module
 1 in stock $197.12
Click for better price!
quote 625059
Cat: 625060 Rel: 22 Sep 16
 
Mini Mod VCF Transistor Ladder Filter Module
 2 in stock $198.14
Cat: 625062 Rel: 22 Sep 16
 
Mini Mod Discrete Cascaded VCA Module
 1 in stock $156.26
Click for better price!
quote 625062
Cat: 676107 Rel: 17 Nov 16
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


More Modular Mojo from Sequential:
The DSM03 Feedback Module is Sequential's third offering for modular synths. At the heart of this unique module is a tuned feedback line for sound mangling; a newly-designed, resonant, low-pass filter for tone shaping; and a triggerable noise source for Karplus-Strong-type plucked string synthesis. Tuned feedback has been a part of the Sequential tonal palette since the ground-breaking Evolver, and is also a key sound-shaping component of the Pro 2 and Prophet 12 synths.

Plug It In and Tweak It:
The DSM03 is a 10HP wide, standard Eurorack-format device with interconnections made using 3.5 mm phone jacks. A set of inputs allow individual voltage control of feedback amount, tuning, low-pass filter frequency, and filter resonance. The module provides one audio input and one audio output as well as an audio trigger input for the noise source.

New Filter Design:
The 4-pole, resonant, lowpass filter is a new digital design, based partially on classic analog filters of the past. It features over-sampling and numerous refinements to the signal path, which is 24-bit, 96 kHz resolution for outstanding audio fidelity. It's a great-sounding design that works well both in the feedback context and as a stand-alone tone-shaping tool.

Creative Possibilities Abound:
So if you're looking for something esoteric, but still fundamental to the Sequential sound, add this secret weapon to your modular arsenal. From Karplus-Strong synthesis to metallic, industrial grit, the creative possibilities are wide open.
Read more
 2 in stock $191.65
Cat: 634751 Rel: 21 Dec 16
 
Dynamic impulse filter synth module in Eurorack format - 8HP wide
Notes: A New Species of Lowpass Gate:
Organic and percussive, the Dynamic Impulse Filter utilizes an entirely new, all analog design to replicate the impact transients and vibrancy of a percussion hit. The result is a versatile filter module that sounds natural and energetic. The Dynamic Impulse Filter works in one of three modes: resonant lowpass filter, high quality VCA, and a combined lowpass gate mode that manages both timbre and loudness at the same time. The core of the filter uses a Sallen-Key topology to produce a smooth two pole filter that will self-oscillate at high resonance settings.

We Love Vactrols Too...
The dynamics response control is the key. Historically, lowpass gates have used a light dependent resistor called a vactrol to impart a magical, organic response onto a sound. This unique signature has given the vactrol an almost mythical status in the synth community. However, the venerable vactrol is not without its problems. Vactrol response times can vary wildly, creating sonic differences from module to module that cannot be adjusted without replacing the vactrol. The fruit of over two years of research and development, the Dynamic Impulse Filter evolves the lowpass gate into the present by retaining the sonic characteristics we love about vactrols while solving all the problems that come with it. The unique design of the Dynamic Impulse Filter replaces the vactrol with a modern analog circuit created to replicate and expand on the signature sound of the vactrol. The response time of the Dynamic Impulse Filter is not static like a vactrol; instead it is tuneable allowing the response of the module to adapt to any musical context.

Used as a filter, the Dynamic Impulse Filter offers a wide sonic palate with smooth frequency sweeps and aggressive resonance. The Dynamics Response control is an essential part of the filter's unique ability to create rich, tuneable sounds. The impulse trigger input and the exclusive Dynamics Response control allow the module to add an organic, percussive quality to any sound or become a versatile analog drum generator. The Dynamic Impulse Filter will uniquely emulate everything from snappy deep kicks, woody toms, and expressive hand drums, to open up a new world of electronic percussive sounds.

Shared Response:
The Response output of the Dynamic Impulse Filter can be used to control other modules that utilize vactrols. The Response output superimposes the variable Dynamics Response onto vactrol based modules allowing the response of a static vactrol to become adjustable. This opens a range of new possibilities for other modules that use vactrols.

Dynamic Impulse Filter Controls:
- Dynamics Response Knob - Sets the decay time related to the impulse gate input and dynamic CV input.
- Dynamics Knob - In filter mode, the dynamics knob controls the centre frequency of the filter. In VCA mode, the dynamics knob controls the pass through signal level. In lowpass gate mode, the dynamics knob controls both the centre frequency of the filter and the pass through signal level.
- Dynamics CV Knob - Attenuates the incoming dynamics cv signal.
- Filter Mode Resonance Knob - Only active in filter mode, the filter mode resonance knob controls the amount of resonance.
- Mode Switch - Switch between the 3 module modes. VCA position (up) enables VCA mode, both position (centre) enables lowpass gate mode, and filter position (down) enables low pass filter mode.
- Input Jack - Audio signal input.
- Dynamics CV In Jack - CV input used to modulate the dynamics amount.
- Response Out Jack - Dynamics response CV output. This output if the dynamics response circuit is optimized to control the vactrol response of modules utilizing vactrols. It is designed to be patched into a CV input. The response out jack will respond like a gate when used with non-vactrol modules.
- Impulse Gate In Jack - Gate or trigger input used to strike the vactrol and quickly modulate the dynamics of the module.
- Out Jack - Audio signal output.
Read more
 1 in stock $157.28
Click for better price!
quote 634751
Cat: 633371 Rel: 14 Feb 17
 
Multi-tool synth module for audio signals & control voltages
Notes: Samara is a "Swiss Army Knife" type of module, intended to serve the most common voltage and audio signal processing purposes such as attenuation, offsetting, mixing, inverting, and even basic waveshaping. Samara features four channels, each with two inputs and an attenuator, additional switchable offset generators, four voltage level and polarity indicators, two adders with switchable scale, and a precision four-channel processor that selects minimum and maximum voltage.
Read more
 2 in stock $167.49
Cat: 638769 Rel: 20 Feb 17
 
Quad envelope generator with looping, CV over attack/decay & unique chaining capabilities
Notes: Contour is a quad envelope generator. Each channel has looping, CV over attack and decay, as well as unique chaining capabilities. This makes for the creation of complex modulation patterns with a minimum amount of trigger sources. Cycle times range from 5ms all the way to 20 minutes, providing an extremely wide range. In addition to its full feature set and four channel architecture, the ergonomic interface makes it ideal for performance scenarios.
Read more
$203.25 SAVE 20%
 2 in stock $162.60
Cat: 640973 Rel: 27 Feb 17
 
Tempo-syncable modulation source module - 6HP
Notes: The Modbox is a tempo syncable modulation source with a three-phase LFO, CV Skewable LFO, Sample and Hold, and White Noise generator.

LFO 1 is a three-phase LFO with independent outputs for each phase which are set at 0, 120, and 240 degrees. Shape can be switched between Sine, Triangle, and Saw with a push of a button.

LFO 2 is a Skewable LFO with three shapes. The LFO shape can be smoothly changed from a Ramp through Triangle to Saw wave shapes. The skew shape can be changed with the Skew knob or with CV

The Sample and Hold circuit's clock is normalled to the 2nd LFO but can be clocked externally as well. The sample and hold samples voltage from and internal white noise source. There is also an input for an external sample source. White noise has its own output as well for use with other modules and applications.

Both LFOs can be sync'd to an external clock source by holding the wave shape button for different lengths of time. As they are independent of each other, one can be sync'd while the other runs free like a gazelle on an African plain.

Tempo sync calculates the time between incoming clocks and reacts instantly to each new clock pulse. Each rate knob becomes a multiplier/divider when sync is engaged.
Read more
 1 in stock $192.01
Click for better price!
quote 640973
Cat: 641957 Rel: 27 Feb 17
 
Voltage controlled rhythm generator module
Notes: The Numeric Repetitor is a rhythmic gate generator that describes rhythms as binary numbers and then multiplies by other numbers. With a concept similar to the Zularic Repetitor, the Numeric Repetitor is a voltage controlled rhythm generator.

Clock is sent to the Beat input. With the Prime potentiometer or a CV you can select one rhythmical pattern based on 16 mathematic factors. With a switch you can select between 2 sets of patterns, X and Y.

The gate pattern is available at the Prime output, variation of it at outputs Factor 1, 2 and 3. Each of the variations can be offset in time with the Offset potentiometer or CV, which can generate great rhythms. Each channel has a LED which visualizes a gate.

The Measure input or the button allow you to reset the pattern.
Read more
 4 in stock $188.95
Cat: 641965 Rel: 28 Feb 17
 
10HP dual gate burst generator with a 1v/8va LFO
Notes: Dual Burst Generator with integrated, voltage controllable LFO/clock generator. A burst generator produces a stream of gate signals on command which are synchronized to an internal or external clock in the case of this module. The length of the 33 possible burst patterns, each with a maximum length of 64 gates can be modulated and the pattern can be "choked" as well.

Size: 10 HP Eurorack
Depth: 1 Inch
Power: 2x5 Eurorack
Draw +12V: 55mA
Draw -12: 5mA
Read more
 1 in stock $170.56
Cat: 641967 Rel: 27 Feb 17
 
Rhythmical gate generator based on the rhythm theory of African music
Notes: The Zularic Repetitor is a rhythmic gate generator based off the rhythmic theory of African music. A core pattern forms the basis and variation is achieved by offsetting this pattern in time relative to the base.

This module contains 16 mother rhythms from African, Indian, Latin and Funk roots. Each rhythm outputs four variations of itself simultaneously while allowing the offset of each part in time by CV and Knob. It requires only a master clock to run and also allows the pattern to be reset by an external gate.

Connect a clock to the Beat input and let's go! With the Mother potentiometer or a CV you can select one of 32 rhythmical patterns which have African, Indian, Latin American or Funk roots. With a switch you can select between rhythms from the Old or New World.

The gate pattern is available at the Mother output, variation of it at outputs Child 1, 2 and 3. Each of the variations can be offset in time with the Offset potentiometer or a CV, which can generate great rhythms. Each channel has a LED which visualizes a gate.

The Measure input allows you to reset the pattern.

Size: 8HP Eurorack
Depth: 1 Inch
Power: 2x5 Eurorack
Draw +12V: 50 mA
Draw -12: 5 mA
Read more
 1 in stock $195.06
Cat: 637044 Rel: 22 Mar 17
 
Dual LFO with waveshaping, sync input & DC-coupled VCA - dark edition
Notes: This has two LFOs, each with variable waveshape from Saw to Triangle to Ramp waveforms, or variable Pulse width on the Square wave output. LFO 1 has the addition of a low range and a Sync input. The nominal maximum frequency of the LFOs when in Triangle shape is 20Hz, but under certain combinations of settings they will go much higher, well into audio range.

Also included is a DC coupled VCA, the input of the VCA is normalised to the output of LFO 2, so a 0 to +5V input to the VCA CV input gives control of the LFO waveform amplitude. It can also be used as a stand alone VCA.

This module is very useful for controllers such as the Waldorf KB37 where the modulation wheel gives out 0 to +5V, this can be routed to the VCA CV module so the level of the modulation waveform can be easily controlled. This makes it very easy to add VCO vibrato or filter 'wah' with control of modulation amount from the modulation wheel or other controller.
Read more
 1 in stock $180.78
Cat: 643384 Rel: 27 Mar 17
 
Voice allocator, note hocketing & analog shift register module - 6HP
Notes: The Shifty is essentially a combination of four sample and hold stages, a sequential gate and sequencer controller. This collection of functions allows for some specific and useful utility application.

One of the primary uses for Shifty is to take a monophonic sequence source and route each new note of the sequence to up to four different synthesizer voices in a specific pattern. In this way you can create pseudo polyphonic sequences since each voice can be triggered to play and sustain while the next voice int the sequence gets triggered. Another term for this is hocketing.

The other main application of the Shifty is to function as an Analog Shift Register. In this mode each new gate input received causes the current set of pitches to be shifted to new output locations as a new one is added and the oldest one is replaced. This can be an interesting way to create chords that are up to four stacked notes when used with a pitch sequence source that has a harmonious series of notes (e.g. a pentatonic scale works really well). Even just using two of the outputs will yield very interesting melodic interplay and is an excellent way to make a simple sequence much more complex and interesting.

In a more basic way the Shifty could be used as a simple Sample/Track and Hold module or as a sequential gate.
Read more
 2 in stock $177.70
Cat: 644210 Rel: 06 Apr 17
 
High density 8 channel utility module - 10HP
Notes: Levit8 is a high density utility module designed to give you a large number of attenuator/gain functions along with optional mix, invert, DC offset and polarity indication for incoming signals.

Few modules can beat the LEVIT8's high density of functions, which has eight channels that can be used as individual attenuators, amplifiers, inverters of offset generators. Optionally it features three different mix configurations with four or eight inputs for control voltages or audio signals, fulfilling various tasks at the same time.
Read more
 1 in stock $197.11
Click for better price!
quote 644210
Cat: 737691 Rel: 24 Apr 17
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The TouellSkouarn Kala Goanv is an inductor based filter. According to this unique design the sound is extraordinary and somewhere in between a phaser-ish band pass, distortion and a gnarly wah-wah with a vintage character.

Even if the module is pretty simple it has LOTS of character. We find an input and one output level control and also a big cut-off controller. The small grey knob controls resonance. A cut-off CV input with attenuator is there as well but that's about CV control. Frequency behaviour is very dependent on the other parameters' settings.

This boutique module is hand-wired, has a beautiful laser-etched perspex faceplate and the big - knob is vintage.

As the module is inductor based it can easily pick up hum and electric fields so keep it away from the power supply transformer.
Read more
 1 in stock $162.61
Cat: 642594 Rel: 24 Apr 17
 
Bandpass filter inductor based module with distortion & CV control
Notes: The TouellSkouarn Kala Goanv is an inductor based filter. According to this unique design the sound is extraordinary and somewhere in between a phaser-ish band pass, distortion and a gnarly wah-wah with a vintage character.

Even if the module is pretty simple it has LOTS of character. We find an input and one output level control and also a big cut-off controller. The small grey knob controls resonance. A cut-off CV input with attenuator is there as well but that's about CV control. Frequency behaviour is very dependent on the other parameters' settings.

This boutique module is hand-wired, has a beautiful laser-etched perspex faceplate and the big - knob is vintage.

As the module is inductor based it can easily pick up hum and electric fields so keep it away from the power supply transformer.
Read more
 1 in stock $173.62
Click for better price!
quote 642594
Cat: 657572 Rel: 24 Apr 17
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Heklev is an analog echo and reverb module, which can also be used to create chorus and flanger effects. It is based on MN3007 bucket brigade devices. Besides the actual effect block, there is a built-in VCA. The Heklev's beefy sound character is reminiscent of renowned vintage effect units.

The Heklev comes equipped with three potentiometers to adjust delay time and feedback of the BBD circuit as well as the mixture of dry and processed signals. A CV input allows the user to modulate the echo's rate. The results are sent to the VCA, which can also be influenced by control voltages. Heklev offers three outputs. They emit dry and mix signals of the effect block as well as material coming from the VCA.

On the circuit board of the Heklev, there are five trim potentiometers. These control elements make it possible to adjust input and output volumes, the BBD bias, noise cancelling as well as the range of the echo time knob.
Read more
 1 in stock $184.94
Cat: 657758 Rel: 21 Jul 17
 
Compact step sequencer & modulation source module - 6HP
Notes: Tirana is a super-compact step sequencer and modulation source, serving as the utility module for supporting other sequencing devices, but due to a suite of smart features, the module shines on its own terms. Tirana sports unipolar and bipolar voltages, mutable step triggering, transposition, and direction change controlled externally via CV. The step repeat function and virtually infinite expandability make it even more powerful.
Read more
 2 in stock $161.36
Cat: 739163 Rel: 21 Jul 17
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Tirana is a super-compact step sequencer and modulation source, serving as the utility module for supporting other sequencing devices, but due to a suite of smart features, the module shines on its own terms. Tirana sports unipolar and bipolar voltages, mutable step triggering, transposition, and direction change controlled externally via CV. The step repeat function and virtually infinite expandability make it even more powerful.
Read more
 1 in stock $157.34
Cat: 599600 Rel: 16 Aug 17
 
3-section modulation module with flexible, all-analog ADSR & LFO circuitry
Notes: Three different modulation sources in one module make the mod1 the control centre of your modular patch.

From simple envelopes and LFOs to complex looped multi-stage curves, the mod1 delivers rich and endless modulation options - all based on pure analogue circuitry for everything from super- smooth curves to razor-sharp edges that never sound "digital".

From gently undulating LFOs to ultra-precise hard cuts, you get it all based on innovative analogue circuits for a truly musical touch.
Read more
 3 in stock $161.36
Click for better price!
quote 599600
Cat: 658628 Rel: 18 Aug 17
 
Analog noise & random source module - 4HP
Notes: This new revision of the Quantum Rainbow features all of your favourites from the original plus two new noise outputs to expand the palate even further.

Known as one of the best voiced noise sources to date, the Quantum Rainbow is a surplus of true randomness. Unlike digital noise which will only ever be pseudo random at best, analog noise is the only real source of natural random fluctuations. This is because analog noise is the actual sound of real electron behaviour, as they break through a semiconductor junction. The QR uses a reverse biased transistor as the source of this amazing phenomenon.

Interesting fact - studies have been performed in order to prove that the power of thought is linked to statistical phenomena via the means of controlling random electron behaviour.

Special attention was paid when voicing the seven colours of noise in order to provide the most pleasing and accurate coloured noise pallet - that only a true analog noise source can deliver.
Read more
 3 in stock $153.19
Click for better price!
quote 658628
Cat: 739183 Rel: 13 Sep 17
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The SD909 adapts the iconic TR-909 snare drum and noise generator for use in the Eurorack modular synthesizer format. We painstakingly tested the module in our lab to sound like a fresh machine coming off of the assembly line back in the 80s. On top of the original circuit, we have added new features that expand the palette of what can be produced with this analog circuit.

The sound of the SD909 consists of two main sections: the binary noise generator and two modulated triangle oscillators. The oscillators provide the low end punch while the noise makes up the upper sonic spectrum, resulting in a combination that makes the 909 snare sound so rich. In the SD909 module the noise generator and oscillators are variable and voltage controlled, which pushes the circuit beyond its original boundaries offering new sounds as well as many variations of the original tone. The panel has markings to guide setting the knobs to reproduce the snare sound of the vintage machine.

Just like the other drums in this series, the SD909’s high-powered output gain stage allows further enhancement of the sound through distortion and clipping. We have designed a dual pulse-shaper circuit on each gate input so you can trigger your SD909 with Trigger/Gate signals from step sequencers, clock dividers, or any other pulse/clock sources. Also, the SD909 is equipped with access to the MIXZ MixBus matching the rest of the Tiptop line of percussive modules.
Read more
 1 in stock $161.99
Cat: 643379 Rel: 13 Sep 17
 
Quad voltage controlled amplifier & cascaded mixer - 12HP wide
Notes: The Quad VCA is a compact and feature packed module that is sure to find its way it almost all of your patches. In addition to being used for standard VCA duties it can also be used as a mixer and signal booster.

Features:

- Manual LEVEL control per VCA which is convenient when using the module as a mixer or for biasing when CV modulating the VCA with a bipolar LFO.
- Dedicated CV attenuators with dual colour LEDs for monitoring bipolar CV signals.
- Continuously adjustable response from linear to exponential per VCA.
- Each CV input is normalled to the adjacent one for cascaded control.
- Each output is normalled to the mix input of the adjacent one which allows you to use adjacent sets as submixes or the fourth output can be used as a master mix output when none of the other outputs are patched.
- Each VCA has a boost switch that increases the output level by approximately +6dB (double).
Read more
 4 in stock $171.57
Cat: 658617 Rel: 13 Sep 17
 
Snare drum module in Eurorack format - 8HP
Notes: The SD909 adapts the iconic TR-909 snare drum and noise generator for use in the Eurorack modular synthesizer format. We painstakingly tested the module in our lab to sound like a fresh machine coming off of the assembly line back in the 80s. On top of the original circuit, we have added new features that expand the palette of what can be produced with this analog circuit.

The sound of the SD909 consists of two main sections: the binary noise generator and two modulated triangle oscillators. The oscillators provide the low end punch while the noise makes up the upper sonic spectrum, resulting in a combination that makes the 909 snare sound so rich. In the SD909 module the noise generator and oscillators are variable and voltage controlled, which pushes the circuit beyond its original boundaries offering new sounds as well as many variations of the original tone. The panel has markings to guide setting the knobs to reproduce the snare sound of the vintage machine.

Just like the other drums in this series, the SD909’s high-powered output gain stage allows further enhancement of the sound through distortion and clipping. We have designed a dual pulse-shaper circuit on each gate input so you can trigger your SD909 with Trigger/Gate signals from step sequencers, clock dividers, or any other pulse/clock sources. Also, the SD909 is equipped with access to the MIXZ MixBus matching the rest of the Tiptop line of percussive modules.
Read more
 2 in stock $164.42
Cat: 664820 Rel: 03 Oct 17
 
2 channel low-pass gate with integrated mixer - 10HP
Notes: DYNAMIX is a fast two-channel Low Pass Gate, dynamics manager and mixer, the core of which is derived from our 0-COAST synthesizer. The LEVEL parameter provides simultaneous voltage control over the Amplitude and Frequency content of audio signals, operating as a VCF/A. The DYNMC parameter accepts audio signals or control voltages and converts them into a signal that may increase or decrease the LEVEL parameter thus allowing for Expansion, Compression and Ducking. The summing section is complete with an AUXiliary INput allowing for the chaining of multiple MIX units (modDemix, Optomix and RxMx modules) to create large, non-centralized mixes.

The DYNAMIX is functionally similar to the Optomix LPG: a fundamental element in the sound of West Coast Synthesis, however, rather than using the Vactrol component that gives the Optomix its characteristic "slow" sound, the DYNAMIX circuit utilizes transistors in a topology that has more in common with East Coast instruments. This combination of West Coast technique and East Coast circuitry is No-Coast synthesis at its best, allowing the Low Pass Gate to be used in tandem with an extremely important East-Coast synthesis circuit: the ADSR, a 4-stage Envelope generator we call CONTOUR.

Width: 10HP
Depth: 24mm
Power @+12V: 55mA
Power @-12V: 45mA
Read more
 2 in stock $162.38
Cat: 665167 Rel: 02 Nov 17
 
Overdrive/distortion module
Notes: Full-blooded distortion - Pit Viper is a solid state overdrive for hard-boiled musicians. The circuit can generate clean, beefy signal boosts. However, its true strengths lie in aggressively screaming distortions with a tangible character.

Pit Viper comes equipped with the following control elements:

- Toxicity: Gain potentiometer - Please turn up for heavy distortion.
- Hiss: Tone knob - Turn clockwise to cut the treble.
- Venom: Volume potentiometer
- Fear: Three-stage soft clipping switch - Activates normal soft clipping or a more tube-like version with less treble.
- Malice: Three-stage hard clipping switch - Activates beefy hard clipping or a spongier version with less treble.
- Blend: Dry / Wet potentiometer
- Bite: CV input plus attenuator to cut the high frequency range. Without a cable plugged in, the knob can be used for adjusting the treble manually.
- Saturation: CV input plus attenuator and on/off switch to influence gain and saturation.
- Filter: CV input plus attenuator and on/off switch to control the Viper's VCF circuit.

Via a jumper on the circuit board, users can choose between several filter types:

- Passive clipped low pass
- Unbuffered high pass
- Buffered high pass
- Buffered low pass

Furthermore, there is a trim potentiometer on the circuit board, which can be used to adjust the gain.

PLEASE NOTE: Any scratches on the front panel are part of the Pit Viper's design.
Read more
 3 in stock $153.19
Cat: 668626 Rel: 09 Nov 17
 
Quad MIDI to CV converter - 6HP
Notes: MIDI Thing is a compact 4 channel MIDI to CV/Gate interface featuring 12 bit conversion that allows V/Oct control with around 1 cent precision.

MIDI Thing offers four different functional modes:

- Mono: One MIDI channel - Pitch, velocity, bend, modulation & gate
- Duo: Two MIDI Channels - 2x Pitch, velocity & gate
- Multi: Four MIDI Channels - 4x Pitch & gate
- Drum: Eight trigger outputs

All modes have Clock and ST/SP outputs.

- Current needs: +12V: 32mA, -12V: 8mA
- Width: 6 HP
- Depth: 30 mm (inc. power connector)
Read more
 1 in stock $156.26
Cat: 667766 Rel: 14 Nov 17
 
Drone module with five low harmonic triangle oscillators - 12HP
Notes: This module was designed with a very specific purpose in mind. Born out of a need to find the space in between tones; to achieve pulsing; wider droning; wanting to be able to fit the power of many oscillators into a little package.

It isn't a crazy CV laden feature monster. But it doesn't need to be. It does what it is asked to do over and over and again.

This has a very different sound than a squarewave based multi-oscillator. The Dronebank breathes and moves. Create chords, gate the tones, filter them, ring modulate.

Use it as an FM source, combine it with delay, let it hypnotize you. Most importantly, make music with it. Or use it for mind control experiments.
Read more
 1 in stock $188.95
Cat: 671598 Rel: 29 Nov 17
 
Monophonic MIDI/USB interface Eurorack module with outputs for gate, clock, reset & two outputs for CV's
Notes: A-190-4 is the replacement for module A-190-1 which is no longer available. The functions of A-190-1 and A-190-4 are nearly the same (Midi In, Midi Out, CV1, CV2, Gate, Clock, Reset). But the operation of the A-190-4 has been improved because a 3-digit LED display is available. The current values of all parameters (like Midi channel, reference note, clock divider) can be read back and modified by means of up/down buttons. In addition, A-190-4 is equipped with an USB interface and the external +5V supply is no longer available. Consequently, the additional charges for the 5V adapter fall away.

The module width is the same for A-190-1 and A-190-4. In the A-100 basic systems the A-190-1 will be replaced by the A-190-4 from about May 2014.

Important notes:

- The Scale (SCA) and Tune (TUn) parameters remain unchanged when the module is initialized! Otherwise the initialization would overwrite the adjusted values. Because of the tolerances of electrical parts there are no fixed values for SCA and TUn which are valid for all modules. The values for SCA and TUn differ a bit from module to module because of the tolerances of electrical parts. In case that the module has been adjusted totally wrong: typical values are 100 for SCA (coarse) and 55 for TUn (coarse).

- The module comes with installed bus jumpers for CV and Gate. One has to remove the jumpers if e.g. an A-164, A-190-1, A-190-2, A-190-3, A-185-1 or A-185-2 is already connected to the CV and/or gate lines of the same bus board! If the A-190-3 should be used as CV and gate source for the A-100 bus the CV and gate connections of other CV/gate sources to the A-100 bus have to be removed. Otherwise short circuits are made between the outputs of the CV or gate transmitters!

- The gate level of the A-190-3 can be changed from +5V to +12V. For this the jumper on JP10A (behind the CV Note socket, labelled "GATE 5V JP10A") has to be removed and installed to JP10B (behind the 16 pin bus connector, labelled "GATE 12V JP10B").

- The module is a USB device or slave in USB mode. It has no USB host function (like computers or laptops with type A USB connectors).
Read more
 2 in stock $173.62
Click for better price!
quote 671598
Cat: 671744 Rel: 18 Dec 17
 
Dual clock divider/trigger generator with multiple modes
Notes: Integra Solum is a dual rotating clock divider with 16 trigger outs in two sets of eight, packed into 8 HP. The two sides can be clocked or reset independently or a single input and/or reset normals to both sides. IS switches between three modes and an encoder adjusts the offset of each side. Bonus modes add randomization options.
Read more
 2 in stock $196.09
Items 1 to 50 of 100 on page 1 of 2
1  2  »

Filter

Saved Searches
Save current search
Release Date
Featured
Close