100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 10 of 10 on page 1 of 1
WMD Pro Output Module (synth module)
Cat: 580282 Rel: 30 Jul 15 • View all Synth modules
 
Pro Output synth module with Low Distortion / Low Noise & High Headroom - 6HP wide
Notes: The WMD Pro Output is a simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear. It also includes a very high quality headphone driver.

Rail to rail opamps at the input stage allow for headroom above the typical eurorack levels of 20Vpp. The Pro Output can handle 23Vpp before clipping. Signals are attenuated down to the proper levels allowing for simple adjustment free connection to any type of device, professional or consumer.

The Pro Output is DC coupled through the entire signal path, including the headphone driver. This design eliminates coupling capacitors and the distortion they can cause.

Controls and I/O:

Input - The inputs are designed to accept any normal modular level. 10Vpp is the nominal operation level. The left input is normaled to the right side for mono operation. Inputs will clip at 23Vpp, giving enough headroom for any eurorack signal.

Phones/Line - The headphone driver connects to a 3.5mm stereo jack, and a 1/4" jack for whatever type of headphones you use. It can drive both simultaneously.

The headphone output level is internally limited to protect against accidental knob turns. Connect a couple of jumpers to the rear of the module to disable this limiting. This will allow the headphone amp to drive headphones extremely loudly, but still without distortion. Output quality remains the same regardless of the jumper settings.

With the limiting enabled (jumpers off), the maximum output is around -10dBV. With limiting disabled (jumpers on), the maximum output increases to pro level, about +4dBu.

Stereo - The Stereo (-10dBV) output is designed to interface directly with consumer level gear. Hook directly to sound cards, portable recorders, and speakers. It can be used as a second headphone output but will be loud.

+4dBu Bal - These two outputs (left and right) are high quality low impedance balanced line drivers. They are designed to drive long cables and to drive balanced transformer or transformerless inputs. Use these to connect directly to mixing consoles, mic preamps, or any other piece of professional outboard gear.
Read more
 2 in stock $190.98
Click for better price!
quote 580282
Cat: 588826 Rel: 02 Oct 15 • View all Synth modules
 
Delay synthesiser module - 4HP wide
Notes: DPLR is a delay module with two interactive delay lines, each with 750mS of delay time.

One input is split to two delays which share overall delay time (DELAY) and regeneration (REGEN). Side B has control over its delay offset (SPREAD) from side A.

Delay, Spread and Regen are all voltage controllable. Regen at max will echo indefinitely, and can create interesting noise swashes.

The pushbutton at the top taps through seven different crosstalk configurations (Regen isolated through ping-pong). Push and hold to change through four different Regen Filter settings from very bright to dark.
Read more
 3 in stock $158.30
Click for better price!
quote 588826
WMD/SSF Ultrafold Module (synth module)
Cat: 588817 Rel: 02 Oct 15 • View all Synth modules
 
Voltage controlled wave folder synthesiser module - 6HP wide
Notes: ULTRAFOLD is a powerful voltage controlled wave folder.

The input drive and wave fold controls make up the heart of the design, providing warm saturation and additive harmonics to the input signal.

The wave shift control offsets the input signal to allow for asymmetrical folding - unveiling the subtleties in the distribution of spectral content.

The novel bipolar feedback control takes wave folding to a new level by returning the folded output to the input, thereby skewing the wave shapes for dramatic changes to the upper harmonics.

An auxiliary feedback input is provided to allow for insane folded FM sounds when another oscillator drives this input.

Power Draw: +30mA, -30mA. 6HP width. 25mm Depth.
Read more
 1 in stock $171.57
Click for better price!
quote 588817
WMD/SSF ADSR VCA Module (synth module)
Cat: 588820 Rel: 02 Oct 15 • View all Synth modules
 
Multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA) synthesiser module - 6HP wide
Notes: ADSRVCA is a multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA).

This envelope generator is capable of producing a classic, gate driven Attack/Decay/Sustain/Release (ADSR) envelope as well as a self sustaining, looping Attack Decay (AD) and Attack Decay Release (ADR) one shot envelopes.

The integrated VCA eliminates the need for an external VCA module and can be used independently when an external control voltage is utilized.

The envelope controls the shape of the VCA’s amplitude response by default.

Power Draw: +36mA, -16mA. 6HP width. 25mm Depth.
Read more
 1 in stock $161.36
Click for better price!
quote 588820
Cat: 588824 Rel: 02 Oct 15 • View all Synth modules
 
2 pole multi-mode filter synthesiser module - 4HP wide
Notes: MMF is a 2 pole Multi-Mode Filter in 4 HP. It has simultaneous LowPass, BandPass and HighPass filter outputs.

MMF will self oscillate into a nice sine wave and track 1V/octave. The Resonance is voltage controllable.

The PING input is for a gate or trigger, and generates a fast decay envelope with a nice sound, reminiscent of a vactrol filter, but without the vactrol. PING can normal to the FM jack, or go direct (switchable behind the panel).

The FM input is connected to an attenuverter pot to give you control over the signal.

Power Draw: +62mA, -24mA. 4HP Width. 25mm Depth.
Read more
 3 in stock $161.36
Click for better price!
quote 588824
Cat: 640973 Rel: 27 Feb 17 • View all Synth modules
 
Tempo-syncable modulation source module - 6HP
Notes: The Modbox is a tempo syncable modulation source with a three-phase LFO, CV Skewable LFO, Sample and Hold, and White Noise generator.

LFO 1 is a three-phase LFO with independent outputs for each phase which are set at 0, 120, and 240 degrees. Shape can be switched between Sine, Triangle, and Saw with a push of a button.

LFO 2 is a Skewable LFO with three shapes. The LFO shape can be smoothly changed from a Ramp through Triangle to Saw wave shapes. The skew shape can be changed with the Skew knob or with CV

The Sample and Hold circuit's clock is normalled to the 2nd LFO but can be clocked externally as well. The sample and hold samples voltage from and internal white noise source. There is also an input for an external sample source. White noise has its own output as well for use with other modules and applications.

Both LFOs can be sync'd to an external clock source by holding the wave shape button for different lengths of time. As they are independent of each other, one can be sync'd while the other runs free like a gazelle on an African plain.

Tempo sync calculates the time between incoming clocks and reacts instantly to each new clock pulse. Each rate knob becomes a multiplier/divider when sync is engaged.
Read more
 1 in stock $192.01
Click for better price!
quote 640973
Cat: 696393 Rel: 06 Aug 18 • View all Synth modules
 
Dual channel digitally controlled VCA - 4HP
Notes: The DVCA is a redux of the classic WMD Digital VCA module, giving it more features while reducing its size and power consumption.

Channel A is now unipolar/bipolar switchable, allowing for use as a bipolar VCA.

With control parameters for bias and CV, users can create classic ring modulation and attenuversion effects. Channel B still has the character and features of the Digital VCA.
Read more
 1 in stock $181.79
Click for better price!
quote 696393
Cat: 698451 Rel: 30 Aug 18 • View all Effects pedals
 
Stripped down version of the Geiger Counter digital distortion pedal
Notes: The Geiger Counter - Civilian Issue is 32 killer sounds from the original Geiger Counter. WMD stripped off the majority of the controls and took $100 off the price. This is for those players who want to dial in a tone quickly and save pedalboard space.

The Controls:

Stomp Switch - Like all WMD pedals, the GCCI (Geiger Counter Civilian Issue) is handwired and true bypass, so it won't affect your tone when disabled. When the GCCI is on, the red LED will be lit.

Gain - The gain control provides anywhere from a nice clean tone to a ton of overdrive. Use this to hit the Function tables harder or softer to produce different amounts of harmonics.

Tone - The tone control can be used to fine tune the harmonic content from the Function tables. Use lower settings for fewer upper level harmonics.

Function - Twisting this knob will cause the number on the display to change. It goes 0 to 9 and A to F. This selects the 16 presets inside the GCCI. Push the knob in to activate the Low Fidelity mode for each preset. Low Fidelity mode is indicated by the decimal point on the display.

Each Function recalls parameters from the original Geiger Counter including the Bit Depth, Sample Rate and the Wave Table. The wave tables are displayed in the manual file. As your guitar string swings up and down, the wave table is played left to right from the centre. The output is what's vertically on the graph. The more movement in the Function, the more harmonic content you'll get out.

Volume - Sets the output volume of the GCCI which can be up to 5Vpp, enough to really crush your amp's input stage.
Read more
 1 in stock $182.81
Click for better price!
quote 698451
Cat: 731606 • View all Effects pedals
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The Geiger Counter - Civilian Issue is 32 killer sounds from the original Geiger Counter. WMD stripped off the majority of the controls and took $100 off the price. This is for those players who want to dial in a tone quickly and save pedalboard space.

The Controls:

Stomp Switch - Like all WMD pedals, the GCCI (Geiger Counter Civilian Issue) is handwired and true bypass, so it won't affect your tone when disabled. When the GCCI is on, the red LED will be lit.

Gain - The gain control provides anywhere from a nice clean tone to a ton of overdrive. Use this to hit the Function tables harder or softer to produce different amounts of harmonics.

Tone - The tone control can be used to fine tune the harmonic content from the Function tables. Use lower settings for fewer upper level harmonics.

Function - Twisting this knob will cause the number on the display to change. It goes 0 to 9 and A to F. This selects the 16 presets inside the GCCI. Push the knob in to activate the Low Fidelity mode for each preset. Low Fidelity mode is indicated by the decimal point on the display.

Each Function recalls parameters from the original Geiger Counter including the Bit Depth, Sample Rate and the Wave Table. The wave tables are displayed in the manual file. As your guitar string swings up and down, the wave table is played left to right from the centre. The output is what's vertically on the graph. The more movement in the Function, the more harmonic content you'll get out.

Volume - Sets the output volume of the GCCI which can be up to 5Vpp, enough to really crush your amp's input stage.
Read more
 1 in stock $163.41
FORTHCOMING
WMD Voltera Voltage Expander For Metron Module
Cat: 742232 • View all Synth modules
 
4HP voltage expander module for the METRON trigger & gate sequencer
Notes: Voltera is a voltage expander module for the METRON trigger and gate sequencer and adds 4 bipolar voltage tracks in 4hp. Up to 16 Volteras can be added to a single METRON giving you up to 64 CV Sequencing lanes for your Eurorack modular system!

With independent voltage ranges and quantize settings per track, Voltera allows for real time control over 4 different parameters at once, allowing you to dial that track to the parameter you are sequencing.

Sequence melodies, modulate parameters, and more with ease by adding Voltera to your METRON set up.
Read more
coming soon $168.52
Items 1 to 10 of 10 on page 1 of 1

Filter

Saved Searches
Save current search
Release Date
Featured
Close