100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 1 to 50 of 999 on page 1 of 20
1  2  3  ...  20  »
FORTHCOMING
AION Modular 912 Envelope Follower Module
Cat: 780115
 
envelope follower module
Notes: The Envelope Follower produces two functions which can be used separately or in conjunction. The follower circuit Signal Input presents a control voltage output (DC) proportional to the average amplitude of the AC input signal. The second function, a Schmitt trigger, generates a V-trigger above a threshold voltage (comparator), when a slowly varying or DC voltage is introduced at the control input jack. The normalling of the control input of the follower circuit to the control input of the Schmitt trigger circuit allows both control voltage and trigger to be generated from a single variable source.

Specifications:
Power: +12 (40mA), -12 (8mA)
Depth: 40mm
Doepfer compatible
Read more
MRP:$255.92 SAVE 20%
coming soon $205.97
FORTHCOMING
AION Modular 984 Four Channel Mixer Module
Cat: 780106
 
four channel mixer module
Notes: The 984 Four Channel Mixer is an AC coupled 4-input, 4-output matrix with bass and treble tone controls for each output channel. Each input has a separate attenuator for each of the four channels. Thus a mixer of 16 input attenuators provides maximum channel separation, or variable combinations of volume balance. Tone controls for each of the output channels can attenuate or emphasize bass or treble signals. Flat signal response is archieved with the control settings kept at "5" on the potentiometers. These are 2-pole active tone controls.

Input Impedance: 25k ohms
Output Impedance: 5k ohms
Inputs: Four input potentiometers per channel
Outputs: Four
Frequency Response: Audio only, AC couplet, DC and Low Frequencies are blocked.

Specifications:
Power: +12 (45mA), -12 (45mA)
Depth: 40 mm
Doepfer compatible
Read more
MRP:$635.44 SAVE 19%
coming soon $512.88
FORTHCOMING
AION Modular 905 Reverberation Unit Module
Cat: 780111
 
reverberation module
Notes: When a dynamically varying signal is applied to the input of the 905, the output will consist of a series of closely spaced echoes, the subjective effect of which is similar to that of reverberation of sound. If a small amount of "echo signal" is mixed with a larger amount of "direct signal" (Reverberation Control set slightly clockwise), the effect of a typical concert hall is obtained. If the echo signal only is passed (Reverberation Control is set fully clockwise), an exaggerated echo suggesting a cave is obtained. The relative amount of echo signal and direct signal can be continuously changed from 100% direct signal to 100% echo signal.

Specifications:
Power: +12 (25mA), -12 (25mA)
Depth: 40 mm
Doepfer compatible
Read more
MRP:$314.60 SAVE 30%
coming soon $221.58
FORTHCOMING
AION Modular CP3 Mixer Inputs Module With 2U-3U Adapters
Notes: The CP3 module is a 4 x 1 mixer with positive and negative outputs and a maximum gain of two. This mixer can combine both AC and/or DC voltages. The module has a switch which, in the ON position, allows unwanted spikes to be removed from the waveforms. There is also a passive multiple.

Input Impedance: 25k ohms
Output Impedance: 100 ohms
S/N Ratios: better than 60dB
Read more
MRP:$322.09 SAVE 20%
coming soon $259.03
FORTHCOMING
AION Modular 907A Fixed Filter Bank Module
Cat: 780134
 
filter bank module
Notes: The 907A Fixed Filter Bank is a non-voltage controlled modifier which emphasizes or reduces the gain of the center frequency bands indicated on each of the eight center pots, in addition to the cut-off points from low pass and high pass filters at either frequency extreme. A total of 10 overlapping filter networks are included.

Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible.
Read more
MRP:$459.41 SAVE 19%
coming soon $370.35
FORTHCOMING
AION Modular 921ABB Voltage Controlled Oscillator Bank Module
Cat: 780127
 
voltage controlled oscillator module
Notes: The AION 921ABB is a VCO-bank with two variable waveform generators which produces frequencies ranging from sub-audio (LFO) to 40.000 hz. Four waveforms are available: sine, triangular, sawtooth and rectangular (with variable duty cycle A.K.A. pulse width modulation).
Both oscillators are controlled by the driver on the left side of the module. 3 control inputs for frequency and 2 control inputs for PWM, as well as manual operation for frequency and pulse width. Each of the two oscillators has a frequency adjust pot, an octave switch, the 4 waveform outputs and one exponential and one linear input for frequency control. A switchable synchronization input for each oscillator completes the operability.

Frequency range:
0.01 hz - 40.000 hz

Range switch:
sub audio - 0.01 - 400 hz
audio - 1 - 40.000 hz

Scale switch:
2 or 12 octave frequency span.

Specifications:
Power: +12V (45mA) -12V (45mA)
Depth: 40mm
Doepfer compatible
Read more
MRP:$721.58 SAVE 19%
coming soon $581.54
FORTHCOMING
AION Modular 995 Attenuators Module
Cat: 780130
 
attenuators module
Notes: The 995 Attenuator panel consists of three "passive circuits", each made of a 25k potentiometer between input and output. The signal input to the top attenuator is chained to the bottom two in series. Introduction of a plug into middle or bottom input breaks the normalling system: 1 to 1-2-3, 1-2 to 2-3, 1-2-3 to 1-2-3.
Read more
MRP:$111.11 SAVE 19%
coming soon $89.46
FORTHCOMING
AION Modular 904C Filter Coupler Module
Cat: 780136
 
filter coupler module
Notes: The AION Modular 904C Filter Coupler is an Eurorack clone of the classic Moog Modular 904C.

The 904C Filter Coupler connects the 904A Lowpass and the 904B Highpass together to produce a Bandpass or a Band Reject filter response.

Bandwidth can be extended to three octaves and Center Frequency ranges from 5Hz to 20KHz. Both can be controlled manually or via control voltage.

The 904C provides a wide variety of signal processing and we strongly encourage experimentation but we advise to start with the following settings:

904A Fixed Control Voltage +6
904A Frequency Range 2
904B Fixed Control Voltage -1
904B Frequency Range LOW

The 904A and the 904B are required to use the 904C.
In the "OFF" position, the 904A and 904B are disconnected from the 904C an can be used independently.

The connection cables are provided with the module.

30 mA +12V
15 mA -12V
0 mA 5V


Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible.
Read more
MRP:$314.60 SAVE 19%
coming soon $253.84
FORTHCOMING
AION Modular 923 Noise & Filters Module
Cat: 780146
 
noise & filters module
Notes: The AION MODULAR 923 Noise/Filters is an Eurorack clone of the classic Moog Modular 923.

The 923 Noise/Filters module provides a white noise and a pink noise source along with a manual Lowpass and a 6dB Highpass filter.

The two manual sweep filters, are single pole circuits with a frequency cutoff slope of 6dB per octave and a frequency range of 10Hz to 10KHz.

Any kind of noise color can be achieved using the white noise and filters together.

Specifications:
Power: +12 (35mA), -12 (35mA)
Depth: 40mm
Doepfer compatible
Read more
MRP:$249.68 SAVE 20%
coming soon $200.78
FORTHCOMING
AION Mdular 921 Voltage Controlled Oscillator Module AION Mdular 921 Voltage Controlled Oscillator Module
Cat: 780149
 
voltage controlled oscillator module
Notes: The AION 921 VCO is a variable waveform generator which produces frequencies ranging from sub-audio (LFO) to 40.000 hz. Four waveforms are available: sine, triangular, sawtooth and rectangular (with variable duty cycle A.K.A. pulse width modulation).
Both fixed and variable levels can be obtained from the front panel output jacks. Nominal frequency and range controls (octave) are found at the top of the module.

Voltage controlled rectangular width (VC-PWM) is set by the knob in the upper center (left) with the accompanying voltage input jacks.
Multiple frequency control inputs 1 and 2 can be plugged into this module in parallel. Control input 3 is used via the pot for linear frequency response (Liniar FM). All waveform outputs can be used if desired.

This is what we consider an improved version of the Moog 921 VCO, not a direct clone. Improvements were made concerning tuning and stability issues.

Frequency range:
0.01 hz - 40.000 hz

Range switch:
sub audio - 0.01 - 400 hz
audio - 1 - 40.000 hz

Scale switch:
2 or 12 octave frequency span.

Auxiliary outputs:
2 jacks (one normal, one inverted) with selected waveforms (sine, triangle, sawtooth, inverted sawtooth rectangular and inverted rectangular).
Waveforms amplitude controllable from 0 to maximum.

Hard and Soft synchronisation selectable via a switch.
Synch must be "OFF" (center position) when synchronisation is not beeing used, otherwise it will sound out of tuning.

Specifications:
Depth: 40mm
Doepfer compatible.

30 mA +12V
30 mA -12V
0 mA 5V
Read more
MRP:$459.41 SAVE 19%
coming soon $370.35
FORTHCOMING
AION Modular 902 Voltage Controlled Amplifier Module
Cat: 780138
 
voltage controlled amplifier module
Notes: The AION MODULAR 902 VCA is an Eurorack clone of the classic Moog Modular 902.

The 902 is a Voltage Controlled Amplifier with balanced directly coupled inputs and outputs.

The 902 VCA can be used in any circumstances a voltage controlled variation of gain is desired.
Both audio or CV sources can be modulated by this module.

Both linear and exponential gain response are avaliable.

Specifications:
Power: +12 (50mA), -12 (30mA)
Depth: 20mm
Doepfer compatible

50 mA +12V
30 mA -12V
0 mA 5V
Read more
MRP:$235.95 SAVE 19%
coming soon $190.37
FORTHCOMING
AION Modular 911 Envelope Generator Module
Cat: 780140
 
envelope generator module
Notes: The AION MODULAR 911 Envelope Generator is an Eurorack clone of the classic Moog™ Modular 911.

The 911 Envelope Generator (ADSR) generates the Control Voltage contours required for producing envelopes in conjunction with a voltage-controlled amplifier or a voltage-controlled Filter.

Attack time (T1), Decay time (T2), and Release time (T3) are all independently variable over a 2 millisecond - 10 second range, making the module suitable for very fast percussive sounds or long and evolving sounds.

The 911 Envelope Generator can be triggered by an external gate signal via the Trigger Input or manually by a push button.

Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible
Read more
MRP:$235.95 SAVE 19%
coming soon $190.37
FORTHCOMING
AION Modular 904B Voltage Controlled High Pass Filter Module AION Modular 904B Voltage Controlled High Pass Filter Module
Notes: The AION Modular 904B High Pass filter is an Eurorack clone of the classic Moog Modular High Pass filter.
The 904B High Pass Filter attenuates frequencies below the Fixed Control Voltage(cutoff frequency) point at a rate of 24dB per octave.

The cutoff frequency is voltage controlled through the three control inputs at the bottom of the module (1v per octave).

The Fixed Controlled Voltage knob adjustes frequency over 12 octaves span (1v per octave).

The Frequency Range switch:
LOW- 4Hz to 20kHz
HIGH- 10Hz to 50kHz

Specifications:
Power: +12 60mA, -12 50mA
Depth: 40mm
Doepfer compatible.

60 mA +12V
50 mA -12V
0 mA 5V
Read more
MRP:$315.85 SAVE 20%
coming soon $253.84
FORTHCOMING
AION Modular 904A Voltage Controlled Low Pass Filter Module AION Modular 904A Voltage Controlled Low Pass Filter Module
Cat: 780153
 
voltage controlled low pass filter module
Notes: The AION Modular 904A Low Pass filter is an Eurorack clone of the classic Moog Modular Low Pass filter (should not be confused with the Mini Moog Low Pass filter).

The 904A Low Pass filter attenuates frequencies above the Fixed Control Voltage (cutoff frequency) point at a rate of 24dB per octave. The cutoff frequency is voltage controlled through the three control inputs at the bottom of the module (1v per octave).

The Regeneration knob (resonance) varies the amount of internal feedback, creating a resonant peak at the cutoff frequency.
The Fixed Controlled Voltage knob adjustes frequency over 12 octaves span (1v per octave).

The Frequency Range switch:
(sets the frequency band in two-octave steps)
1- 1Hz to 5kHz
2- 4Hz to 20kHz
3- 16Hz to 80kHz

Specifications:
Power: +12 40mA, -12 25mA
Depth: 40mm
Doepfer compatible

40 mA +12V
25 mA -12V
0 mA 5V
Read more
MRP:$315.85 SAVE 20%
coming soon $253.84
Cat: 775080 Rel: 22 Jun 20
 
sampling module
Notes: Bitbox micro provides Eurorack sampling for smaller racks and smaller budgets. In only 18 HP of rack space you can get a touch screen based sampler with support for 8 stereo sample pads. Now you can record samples directly into the module or load them from the microSD card. Trigger your samples via CV or MIDI, then apply effects and mix the outputs. Save your configurations to multiple presets for later reuse.

Sample Playback

Play up to 24 stereo polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger stereo samples streaming directly from the microSD card
Configure 8 stereo sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Sample Recording

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Automate recording of a multi-sample bank via MIDI and CV
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer

Sample Modes
Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode

Inputs and Outputs
Use the 8 inputs the way you want: assignments include a stereo audio input, up to 8 gate inputs, up to 8 CV inputs and 1 clock input.
Route the audio from each pad out to one of 3 stereo audio outputs or one of 6 mono audio outputs
Listen to all of the pad outputs combined on the master stereo output

External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode - no need to look up CC numbers
Module Features
Use the 2? diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Refine your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Inputs and outputs are DC coupled so you can record and play out CV signals
Read more
MRP:$518.09 SAVE 19%
 More than 10 in stock $418.90
Click for better price!
or call +44 20 7424 1960
quote 775080
FORTHCOMING
2hp Pitch Module (silver faceplate)
2hp
Cat: 766651
 
pitch module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$137.32 SAVE 17%
coming soon $114.44
FORTHCOMING
2hp Pitch Module (black faceplate)
2hp
Cat: 766655
 
pitch shifter module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$137.32 SAVE 17%
coming soon $114.44
FORTHCOMING
Qu Bit Cascade Ratcheting Envelope Generator Module
Cat: 766031
 
envelope generator module
Notes: Cascade is a ratcheting envelope generator featuring burst generation, a flexible curve parameter, and two discrete level controls. Freeze allows you to lock the output voltage exactly where it is with the press of a button or a gate input. The Cascade can be transformed into several other modes, including ASR, ADSR, dual AD, and a gravity-based bouncy-ball mode.
Read more
MRP:$248.43 SAVE 17%
coming soon $207.02
FORTHCOMING
EMW X-Drum 12-Bit Drum Module (black faceplate)
coming soon TBA
Cat: 733238 Rel: 18 Jul 19
 
Eight channel audio & CV sampler for Eurorack - 21HP
Notes: Our favourite module of 2019. Eight channels of audio and CV sampling with real-time editing and processing. Does basic sampling well but quickly gets creative and weird. We love it.

Supplier's notes:
The 'Squid Salmpler' is a Eurorack 8 channel audio & CV sampler. It is designed for immediate real time sampling, editing and mangling within a modular context.

Taking influence from early hardware samplers, The Squid Salmple focuses on usability and instinctive operation, incorporating a proven Pamela's Workout style user interface for minimal screen dependence and a fun, hands on experience.

With support for sampling and playback for both audio and CV, as well as CV control of all parameters, on-the-fly bank loading and saving to USB, The Squid Salmple brings a unique take on old school sampling into the modular realm.

The Squid Salmple comes with a USB Stick containing approximately 90 banks of original carefully curated royalty free samples. This includes a wide range of sounds from classic drum machines and weird synths to field recordings and CV modulations. Banks are provided by both ALM and some of our favourite artists and friends including Mumdance, Solid Blake, Russell Haswell, Lauren Flax, Dave Burraston (NYZ), Sue Zuki, Dungeon Acid, Sasha Lewis and Andrew Duff.
Read more
 More than 10 in stock $414.06
Click for better price!
or call +44 20 7424 1960
quote 733238
Cat: 775085 Rel: 22 Jun 20
 
sampling module
Notes: Bitbox mk2 delivers powerful sampling and mangling for Eurorack. With this module you can add recording, sample playback, clip launching, slicing, granular sounds and musically intelligent looping capabilities to your Eurorack rig. With a 3.5 inch touchscreen, bitbox mk2 makes easy work of selecting, editing, and tweaking your samples. You can stream large samples of up to 4 GB file size straight from the microSD card. Interact with other musical components via CV and MIDI. Tweak your configurations to get them just right, then save them to multiple presets for future reuse. With the new bitbox mk2 hardware, you can now do more with the new more powerful processor.

Sample Playback
Play up to 24 polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger samples streaming directly from the microSD card
Configure 16 sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Use MIDI for polyphonic playback of samples or slices
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer
Sample Modes
Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode
Inputs and Outputs
Connect up to 8 CV modulators to control numerous sample parameters
Trigger each of the 16 pads with a dedicated gate input
Record through the dedicated stereo audio input pair
Use CV to keep time through the dedicated clock input
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Route the audio from each pad out to one of 2 stereo audio output pairs or any of the corresponding single channels
Inputs and outputs are DC coupled so you can record and play out CV signals

External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Trigger each pad independently through a dedicated gate input
Use MIDI to trigger pads via a note per pad
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode- no need to look up CC numbers
Module Features
Use the 3.5? diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Fill out your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Select Flipped UI mode to mount the unit with the screen on the bottom and use the screen, knobs, buttons, and CV jacks as you normally would
Read more
MRP:$772.76 SAVE 17%
 9 in stock $640.49
Click for better price!
or call +44 20 7424 1960
quote 775085
Cat: 780451 Rel: 23 Jun 20
 
Series module
Notes: The Erica Black CV Expander is the satellite module to our HADSR envelope generator, it allows each envelope parameter to be controlled via external control voltage CV.

With this module you get unpredictable, complex envelopes that are ideal for random drones. It is internally patched to the Black Envelope generator via a ribbon cable, supplied with the module.

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, design and usability were the hghest priority. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.

Technical specifications:

CV Input signal level; -10V - +10V
Power consumption: +15mA, -15mA
Module width: 8HP
Module depth: 25mm
Read more
MRP:$119.85 SAVE 54%
 1 in stock $55.13
Click for better price!
or call +44 20 7424 1960
quote 780451
Cat: 780450 Rel: 23 Jun 20
 
Series module
Notes: Erica Syths Black VC EG Expander takes the Black VC EG to the next level - it outputs gates or CVs for each active stage of the envelope so you can design some really advanced patches. Inverted and bipolar envelope outputs are also available.

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, we did not economise on the module width, we put design and usability first. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.

NB: This expander module can be connected only to the Black VC EG. It will not work as a standalone eurorack module.
Read more
MRP:$126.09 SAVE 54%
 1 in stock $58.25
Click for better price!
or call +44 20 7424 1960
quote 780450
Cat: 780436 Rel: 23 Jun 20
 
Series module
Notes: Erica Synths Black Dual VCF is a dual multimode filter with CV control over cutoff and resonance for serious modular patches.

At the core of this VCF is a highly stable, custom multimode VCF chip AS3320 (produced in Riga, btw). This module can be used as two independent VCFs with simultaneous HP, BP and LP outputs, controls can be linked to stereo application and both VCFs can be chained in series or parallel to the summing output for ultimate modulations. Bonus feature - the 16 band spectrum analyser gives you visual feedback on what happens on summing output.

Technical specifications:

Audio output amplitude: 10 Vptp
CV input (full sweep): 10 Vptp
Panel width: 18HP
Module depth: 35mm
Power consumption: 40mA@+12V, 36mA@-12V

Read more
MRP:$468.15 SAVE 54%
 1 in stock $215.34
Click for better price!
or call +44 20 7424 1960
quote 780436
Cat: 781481 Rel: 26 Jun 20
 
Voltage source module
Notes: The QSlider is an analog CV source with four 60 mm faders.

The control range of the four sliders can be set with two min/max controls.

The Min control sets the output voltage at zero position of the slider and the Max control sets the output voltage at the end position of the slider. The slider now controls between these two voltages. This allows you to limit the control range and still have the full control range of the slider available.

At a second output socket the inverted voltage is available (Min and Max are reversed). So the slider can also be used as a crossmix fader.

Two common channels can be operated uni- or bipolar. The voltage ranges are 0..+10V or +/- 5V.

The output sockets are located on an extra 4HP panel for mounting at any place (with approx. 40cm long connection cable). This way several modules can be mounted seamlessly next to each other.

HP : 18
Read more
MRP:$189.76 SAVE 17%
 2 in stock $158.12
Click for better price!
or call +44 20 7424 1960
quote 781481
Cat: 776867 Rel: 26 Jun 20
 
oscillator module
Notes: The RS-95N oscillator is a premium, british sounding VCO with waveshaping possiblities. It has a new front panel design with elongated holes.

It is based on the RS-90 but has more features, predominantly a very special sine wave.

The RS-95N presented here is technically identical but instead a normal frequency control it features a gorgeous, lockable potentiometer with ten turns. This allows precise fine tune control and adds the look of an EMS synthesiser to the VCO.

The module has three audio outputs: pulse, triangle and sine.

The upper shape control affects the pulse width. The lower shape control not only morphs from a falling sawtooth over triangle to a rising saw (or ramp) but simultaneously alters the sine wave and produces a kind of smoothed, softer sawtooth. Additionally the saw/sine output is a CV-INPUT for the symmetry of the sine. Very extraordinary feature that all are voltage controllable.

The oscillator sync is "soft" and not only reacts to square waves but works with all waveforms.

The frequency control has three switchable modes:

STD (standard) with a range of two octaves.
2 is two octaves lower than STD.
WIDE mode gives a range from 0.3 Hz - 17kHz and thus allows use of the RS-95 as VC-LFO with waveshaping options!
The "vary" control not only attenuates but also can amplify the pitch CV. It controls linearly from 0V over 1V/oct to 0.4 V/oct.
Read more
MRP:$312.10 SAVE 17%
 1 in stock $260.08
Cat: 777032 Rel: 26 Jun 20
 
filter module
Notes: Genuine EMS synthi filter, with redesigned faceplate!

This legendary filter can be switched between pre1974 and post 1974 filter type and response. For the first time response can be voltage controlled which was designed on the circuit board but not available on the matrix. This module is made under license from EMS. The only officially licensed remake of the EMS diode lowpass filter used in the VCS3 and AKS synths. It´s a faithful recreation of the original circuit, featuring some modifications that are also done on vintage EMS equipment, like a switchable faster CV response option for very quick modulations. Another switch determines if the filter has 18dB/oct slope as used by EMS pre-1974 or 24dB. The cutoff frequency and also the resonance are voltage controllable. Signal inputs and outputs have level controls.
Read more
MRP:$262.16 SAVE 16%
 1 in stock $219.51
Click for better price!
or call +44 20 7424 1960
quote 777032
Cat: 671564 Rel: 29 Nov 17
 
12dB multi-mode filter with unique classic circuitry, based on the filter from the 70s EDP Wasp synth
Notes: Module A-124 is a special 12dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies, manufactured by the UK company "Electronic Dream Plant" with Chris Huggett und Adrian Wagner). This design "abuses" digital inverters as analog operational amplifiers leading to distortions and other "dirty" effects that generate the specific sound of this filter. The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self-oscillation in contrast to most of the other filters of the A-100 system.

Inputs: Audio In, CV In (2x)
Outputs: Bandpass Out, Low/Highpass Mix-Out
Controls: Audio and CV attenuator, Frequency, Resonance, LP/HP Mix

The function and operation of this module is very similar to the module SEM VCF A-106-5. But the sound of both filters is very different! The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer).

- 3U Eurorack module, 8HP wide, 45mm deep
- Current draw 30mA
Read more
 2 in stock $73.86
Click for better price!
or call +44 20 7424 1960
quote 671564
Cat: 671589 Rel: 29 Nov 17
 
Four-channel stereo mixer - 8HP
Notes: A-138s is a simple but useful 4-in-2 mixing tool. It has four inputs available. Each input is equipped with an attenuator (Level) and a panning control that is used to distribute the signal to the left and right output. Beyond stereo mixing it is equally suited to create variable parallel routings. For example: Any of the four inputs may be routed in variable intensity to feed two filters.

You may regard the A-138s as a smaller version of the A-138m Matrix Mixer.

Inputs and outputs are DC coupled, i.e. the module can be used for the mixing of control signals too.

- 3U Eurorack module, 8 HP wide, 30 mm in depth
- Power consumption: 10 mA at +12 V and 10 mA at -12 V
Read more
 More than 10 in stock $69.70
Click for better price!
or call +44 20 7424 1960
quote 671589
Cat: 689804 Rel: 03 Sep 18
 
Innovative quad envelope - 10HP
Notes: Zadar is a powerful, four-channel envelope, modulation, and transient generator, in a compact yet very complete, feature-rich package. It is capable of synthesising a vast palette of envelope shapes starting from hundreds of shapes stored in the memory. These starting shapes are not mere wavetables, but flexible vectors that can be stretched (from a fraction of a millisecond to half an hour), flipped, warped, distorted, delayed, shuffled, repeated, and amplitude modulated in real time. A set of freely assignable CV inputs allows for external control of most parameters. Each channel can work independently or combined with other channels within one of the chaining and looping algorithms.

Operating Zadar is quick and immediate, thanks to its accessible interface and crisp OLED display. The main screen displays all parameters together with the currently selected shape. Entering the simple 3-page menu is needed only for advanced settings.
Read more
 More than 10 in stock $278.81
Cat: 621354 Rel: 28 Nov 16
 
Quadruple Low Frequency Oscillator (LFO) synth module in Eurorack format - 10HP wide
Notes: Batumi is a fully voltage controlled, quadruple digital LFO module with a slew of interesting and user-customizable features. Each oscillator can be used independently or in one of 3 synchronized modes: quadrature, phase and divide. For each oscillator, there are sine, square and assignable (saw, ramp, triangle and trapezoid) waveform otputs available. Voltage control is possible for each oscillator's frequency, reset, and external sync ("tap tempo"). The total frequency range spans from 28 hours in voltage controlled divide mode, up to 500 Hz.
Read more
 9 in stock $247.60
Cat: 561577 Rel: 15 Sep 15
 
Wavetable module with 21st century advanced wavetable engine with classic Waldorf wavetables included - 32HP
Notes: nw1 is our debut product for the popular Eurorack format. It includes an advanced wavetable engine with independent control of spectral envelope and noisiness - just like Nave.

Wavetable scanning is cyclic with optional modulation of travel speed, position, spectrum, and more besides. By providing the worshipped Waldorf wavetable set from the classic Microwave and Wave synthesizers, nw1 will enrich your Eurorack modular system as a potently powerful sound source. The nw1 sound engine also allows for onboard creation of user wavetables via time domain multiple foldover analysis. All you need to do is connect any sound source to the nw1 to transfer audio into a wavetable. Or use the integrated speech synthesizer to translate typed text into wavetables.

Wavetable synthesis is an extremely powerful sound source suited to producing all kinds of vivid metallic hues and digital clangorous tones. It can create organic, bell-like timbres, as well as spectacular-sounding scans through various waveforms with truly ear-opening results. It was almost impossible to create these kinds of sharp-edged, digital sounds back before the invention of wavetable synthesis in the late-Seventies.

Starting with the wavetable synthesizers of those days, a whole new sound palette left its imprint on so many hit records. Today, with Waldorf's neatly-sized nw1 Wavetable Module, this sound is readily available for the popular Eurorack standard - sounding just as pure, sharp, and massively destructive as it did back in the golden days of digital!
Read more
 More than 10 in stock $164.36
Click for better price!
or call +44 20 7424 1960
quote 561577
Cat: 648930 Rel: 25 May 17
 
Expander module for Pamela's New Workout - 4HP
Notes: Pexp-1 is an expander module for Pamela's NEW Workout offering additional dedicated fixed clocked outputs.

Extend Pam as a master to clock external gear with a super solid MIDI & Din Sync dedicated clock outputs.

Use extra fixed jack clocked gate outputs to free up Pamela outputs for more exotic modulation duties.

Connects to, and powered by, expander header on rear of Pamela's NEW Workout. Only a single expander is supported at any time.
Read more
 5 in stock $97.79
Click for better price!
or call +44 20 7424 1960
quote 648930
Cat: 602205 Rel: 04 Apr 16
 
Quad attenuator, attenuverter, mixer and DC voltage source - 28HP wide
Notes: The shorter and wider brother to the popular Triatt module!

The four handy knobs can act as active attenuators (unipolar) or attenuverters (bipolar) depending on the setting of the two-position switches above each one.

Each input is normalled to a precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 v or -5 to +5 v depending on the position of the mode switch.

- 2 modes for each channel
- 5v normalled to each input
- With external signals it acts as active/buffered attenuator/attenuverter/mixer
- Each output normalled to mix into the adjacent channel on the right making it possible to do sub mixes in groups of 2, 3 or all four channels.
Read more
 2 in stock $73.87
Cat: 772992 Rel: 19 Jun 20
 
power supply module
Notes: Enter the Behringer CP1A Module. A high-performance, ultra-low noise power supply. Easy activation of this module is facilitated by a toggle switch. There are 3 LED Indicators available for each power rail as well as a DC Input. Its narrow design helps it seamlessly fit in your modular synth.

Installing the CP1A is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the CP1A to be mixed with other synth modules for a truly unique set up.
Read more
 2 in stock $47.85
Cat: 686269 Rel: 27 Apr 18
 
Universal, patch-programmable modulation source - 14HP
Notes: Mutable's segment generator is a one-size-fits-all approach to LFOs, envelopes and modulation. A surprisingly creative module with potential way beyond the basics.

Supplier's notes:
ASR envelope, complex 6-stage envelope, LFO, 4-step sequence or switched LFO: Stages can be any kind of modulation.

Not because all these behaviours have been pre-programmed in the module, but because it allows you to describe your own modulations in terms of basic operations: ramp from one voltage to another, hold a voltage at a set level, wait for a trigger and slew. With or without looping.

Whether you need one complex envelope, or several simpler modulations, Stages reconfigures itself according to which of its gate inputs are patched. There is always a role for it in your patch.

That's it. Really, there isn't more to the story.

Self-generating chiptunes? Very weird LFO shapes? Random gate delay? Stages probably does strange and wonderful things when patched in a certain way.

Flexible input/output layout:

The module detects the presence of jacks on its gate inputs to group its segments: whether it is configured as a complex 6-stage envelope, or 6 individual envelopes, or 3+3, 2+4... depends simply on how you patch it. Dummy patch cables might come handy!

When used as a multi-segment envelope, a segment activation signal is produced on all secondary outputs - for example to trigger an external event when an ADSR envelope enters its decay, sustain or release stages.

In case more than 6 segments are required, up to six modules can be chained together thanks to a connector at the back of the module.

Three segment types:

- Ramp segments go from one voltage to another, in a CV-controlled amount of time, with an adjustable curve (accelerating, uniform, decelerating). They are the building block used for the attack, decay or release segments in envelopes... or for LFOs.
- Hold segments stay at a constant (but CV-controllable) voltage for a programmable amount of time. They serve as the sustain or hold segments in envelopes.
- Step segments glide to a target (CV-controllable) voltage, then stay at this voltage for a certain amount of time until a trigger is received. They are the main ingredient for step sequences, but also for building sequential switches or a sample-and-hold.

Looping:

A segment, or a group of segments, can loop on itself: if the last segment of the envelope is included in the loop, the loop lasts forever. Otherwise, the loop remains active while the gate is high, then continues past the last segment of the loop. These two behaviours allow the creation of self-looping envelopes (LFOs), or the sustain stage of a good old ADSR envelope!

Single segment processing:

Even when they aren't part of any group and don't receive any gate or trigger signals, individual segments can perform interesting functions: Ramp can loop on itself and turn into an LFO, Hold can delay a CV and Step can slew it.

Now patch a trigger signal: the self-looping Ramp turns into a tempo-synced LFO, the Hold segment becomes a pulse generator, the Step segment a sample-and-hold.
Read more
 More than 10 in stock $268.41
Click for better price!
or call +44 20 7424 1960
quote 686269
Cat: 557488 Rel: 19 Dec 14
 
Analog computer synth module designed for musical purposes
Notes: MATHS is an analog computer designed for musical purposes. Amongst other things, it will allow you to:

- Generate a variety of linear, logarithmic, or exponential triggered or continuous functions
- Integrate an incoming signal
- With no signal applied, generate a variety of linear, logarithmic, or exponential functions
- Add, subtract and OR up to 4 signals
- Generate analog signals from digital information (Gate / Clock)
- Generate digital information (Gate / Clock) from analog signals
- Delay digital (Gate / Clock) information
Read more
 More than 10 in stock $300.65
Click for better price!
or call +44 20 7424 1960
quote 557488
Cat: 616166 Rel: 09 Jun 16
 
Quad VCA & mixer synth module - 12HP wide
Notes: VCAs are the cornerstones of modular patches: shaping the amplitude or timbre of a tone with an envelope, animating a mixture of several oscillators, controlling the amount of filter modulation with a random source or a touch controller, applying an envelope on the linear FM signal hitting an oscillator... are all possible uses of these super versatile building blocks. That's why you never have enough of them.

What about four more?
Veils provides four VCAs with an adjustable response curve. Veils' outputs are daisy-chained, allowing adjacent groups of 2, 3, or all 4 channels, to be mixed together.
Read more
 More than 10 in stock $149.80
Click for better price!
or call +44 20 7424 1960
quote 616166
Cat: 688779 Rel: 11 Jul 18
 
Stereo headphone driver output - 2HP
Notes: The 'HPO' is an affordable super slim and skiff friendly no frills stereo headphone driver output for your modular synthesiser. Includes a volume control and ability to double up a mono signal into stereo. A great use for that left over 2hp in a skiff or larger system.

Give loved ones, friends and acquaintances a break from your musical 'genius', the HPO offers a solitary cell for focused creativity impregnable from undeserving non-believers.
Read more
 1 in stock $58.26
Click for better price!
or call +44 20 7424 1960
quote 688779
Cat: 641949 Rel: 18 Apr 17
 
Analogue-inspired parameterized drum synthesiser
Notes: Basimilus Iteritas Alter is a parameterized digital drum synthesizer with its roots in the analog world. At its heart, it is a simple six-oscillator additive synthesizer with adjustable waveform, harmonic spread and decay. Adjustable attack including a noise oscillator is also included. dLese are summed and fed into an in..nifolder for crunch and variety.

Basimilus Iteritas Alter is an improved version of Basimilus Iteritas. It is 2HP smaller, includes CV of switches, adds an third mode, and pitch range and knobs know offset rather than attenuate.

Size: 10HP Eurorack
Depth: 1.5 Inches
Power: 2x8 Eurorack
Draw +12V: 150 / 80
Draw -12: 5 / 5
Draw +5v: 0 / 90
Read more
MRP:$415.72 SAVE 17%
 1 in stock $344.35
Click for better price!
or call +44 20 7424 1960
quote 641949
Cat: 772856 Rel: 19 Jun 20
 
dual VCA module
Notes: This is the Behringer SYSTEM 100 130 DUAL VCA. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case- at a very affordable price. Mix the 130 DUAL VCA in with your existing rig or start your modular synth journey from here.

Each VCA in the 130 DUAL VCA comes equipped with three Sig In signal input jacks with their own gain controls. These inputs can accept audio signals via a 3.5 mm jack. The VCA's in the 130 also have a manual gain control, a low and high output as well as signal and clip indicators to keep an eye on your signal's levels. The low output can be connected to guitar amplifiers or mixers while the high output can connect to line level inputs in mixers or powered speakers. The outputs can be further modified to be linear or exponential via a switch located next to the gain knob.

The 130 DUAL VCA can also accept signals from other modules via the 3.5 mm Mod In jacks to shape the waveforms of the Sig In signals. These inputs have also have their own Mod In Knobs that control the amount of signal that goes through the Mod In jacks.

Installing the 130 DUAL VCA is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 130 to be mixed with other synth modules for a truly unique set up.
Read more
 3 in stock $102.98
Click for better price!
or call +44 20 7424 1960
quote 772856
Cat: 684450 Rel: 18 Jul 18
 
Dual ADSR envelope generator - 8HP
Notes: Module A-140-2 contains two ADSR type envelope generators behind a front panel with 8 HP only.

Each ADSR provides these controls and in/outputs:

- LED (displays the envelope output)
- A: manual Attack control
- D: manual Decay control
- S: manual Sustain control
- R: manual Release control
- Gate Input
- Retrigger Input
- CVT Input with attenuator (CVT = CV Time)
- Envelope Output 1
- Envelope Output 2

The output voltage range for each envelope is 0 - 10V. The time range of Attack/Decay/Release is about 1ms to 30s.

By means of internal jumpers one can select which time parameters are controlled by the CVT input (e.g. D only or D+R or A+D+R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question).

Socket CVT can be normalled to an internal fixed voltage (i.e. the switching contact is connected to an internal fixed voltage). That way it's possible to change all time parameters simultaneously by means of the CVT control.

Another jumper is used to set output 2 to normal or inverted envelope.

And another jumper is used for the normalling of Gate 2 to Gate 1 (i.e. ADSR#2 is also triggered by Gate 1).

Two more jumpers are used for the optional bus access to the gate signal of the bus for each ADSR. Changing the positions of the mentioned jumpers allows to modify the factory settings.
Read more
 More than 10 in stock $133.15
Click for better price!
or call +44 20 7424 1960
quote 684450
Cat: 577792 Rel: 06 Jun 19
 
Electronic switch with up to four steps - 4HP
Notes: Module A-151 (Quad Sequential Switch) is like an electronic four-position rotary switch.

It includes trigger and reset inputs, four in / outputs, and a common out / input. Each time a pulse is received at the trigger input socket, the common out / input is connected to the next in / output. After the fourth in / output, the next trigger makes it step back to the first again, and so on. A positive pulse at the reset input switches the out / input immediately back to the first in / output (see Fig. 1). Voltages in the range -8V...+8V at the O/I resp. I/O sockets can be processed by the module.

Four LEDs indicate the active in / output (i.e. the on that is connected to the out / input at any particular time).
Read more
 More than 10 in stock $59.29
Click for better price!
or call +44 20 7424 1960
quote 577792
Cat: 738636 Rel: 09 Jul 19
 
Simplistic quad LFO module with intuitive front panel - 14HP
Notes: Module A-143-3 is a low-cost four-fold modulation oscillator, often called LFO (low frequency oscillator). Like the other modules of the A-143 series (A-143-1 and A-143-2) not a very "exciting" module, just a bread-and-butter device and a simple demon for work. The module contains four simple LFOs. Each LFO is equipped with three waveform outputs: triangle, rectangle and rising sawtooth. The frequency of the sawtooth output is twice the frequency of the other outputs. A three-way switch is used to select one of three frequency ranges mid-low-high, spanning from about two cycles per minute at the lowest, to moderate audio frequency at the highest (about 5 kHz).

If other waveforms or additional LFO features are required (e.g. reset input, adjustable waveform, voltage controlled frequency) the LFO modules A-145, A-146 and A-147 are available.
Read more
MRP:$134.83 SAVE 14%
 7 in stock $116.51
Click for better price!
or call +44 20 7424 1960
quote 738636
Cat: 734890 Rel: 15 Oct 19
 
Multi effects module - 6HP
Notes: Milky Way is a multi effects module with stereo signal flow. Its algorithms are already known from the Blck_Noir and the Grand Terminal.

- Simple and effective 6hp stereo* FX module
- Comes with "T.F.D" firmware installed: 16 types of effects are available, sorted in two banks
- Meta CV effects scanning
- Volume control with VCA

*depending on the effect type
Read more
 7 in stock $170.62
Click for better price!
or call +44 20 7424 1960
quote 734890
Cat: 677564 Rel: 24 Aug 18
 
Joystick/vector mixer for CV or Audio - 14HP
Notes: The most complex modulator is you. The Planar 2 puts macro control over six outputs - including a quad panning mixer - into your hands with a buttery smooth joystick. Record up to 30 seconds of your own movements, stretch it or mangle it with scan mode, use a trigger for playback, or just loop it - synced or not. Add yourself to your patch.

With its smoothly responsive precision joystick, Planar 2 facilitates hands-on vector control of two entirely independent sets of outputs (quadrants A-D, and axis X/Y), plus the ability to capture and playback your gestures. Recording your joystick movements enables the creation of organic and complex envelopes, wild and wobbly LFOs, or extended sonic evolutions. It mixes, morphs, routes and pans audio inputs; triggers gates; outputs control voltages and is itself, CV-controllable. Planar 2 puts the 'joy' back in 'joystick,' and the 'fun' back in 'function generator.' Its multitasking and tactile interface makes it a flexible and unique control device, no matter what your musical genre.
Read more
 1 in stock $326.67
Cat: 711015 Rel: 29 Nov 18
 
Simple power supply for up to four devices - 2HP
Notes: Module A-183-9 is a simple power supply for up to four devices which can be powered via USB (e.g. keyboards, smartphones). An LED shows is the +5V are present.

The module has no USB function but provides only the +5V supply for USB devices.

A control LED shows if the +5V are present.

Note: The module requires an A-100 case with built in power supply A-100PSU3. Only this A-100 supply has the required +5V available. We do not recommend the usage of an older A-100 case with A-100PSU2 as this would require the +5V adapter A-100AD5 and the max. current would be limited to 100mA.
Read more
MRP:$53.68
 More than 10 in stock $49.92
Click for better price!
or call +44 20 7424 1960
quote 711015
Cat: 577753 Rel: 06 Jun 19
 
12dB multi-mode filter - 8HP
Notes: Module A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.

The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates.

The module does not feature self-oscillation in contrast to most of the other filters of the A-100 system.

The module generates a distorted audio signal if the level control is set to about 50% (i.e. centre position) or more with A-100 standard signals like VCOs.
Read more
 More than 10 in stock $75.94
Click for better price!
or call +44 20 7424 1960
quote 577753
Cat: 749811 Rel: 15 Nov 19
 
Complete miniature monophonic synthesiser module - 10HP
Notes: VCO:

- Tune: manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
- Oct: range switch -1 / 0 / +1 octave
- Mod: modulation depth (attenuator wired to the Mod. socket)
- Dest: switch that is used to address the modulation to frequency modulation (position FM) or pulsewidth modulation (positon PM), in centre positon no modulation
- PW: manual pulsewidth control for rectangle waveform, PW can be also modulated by the Mod. input as mentioned above
- Wave: waveform switch (sawtooth / off / triangle), the sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW or fully CW)
- 1V/Oct. (socket): external CV input for VCO frequency (1V/octave)
- Access to internal bus CV (via jumper, optional, please remove the bus jumper if this feature is not used to avoid unwanted frequency modulation as then the unused CV line of the bus works as a kind of antenna)
- Triangle core VCO, frequency range about 32Hz ... 8kHz

Balance unit:

- The balance unit is made of two VCAs which are controlled by the sum of manual Balance control and the balance CV input in the opposite direction.
- The audio input of VCA1 is hard-wired to the VCO output, audio input 2 is connected to the socket Ext.In.
- The output of the balance unit is used as audio input for the VCF
- Bal.: manual balance control, fully CCW the internal VCO is used, fully CW the external signal (Ext.In) is used, at centre position both signals have about the same level
- CV Bal.: CV input for balance (range about 0...+5V)
- Ext. In: external audio input for VCA2, about 5 Vpp level required for similar loudness as the internal VCO
- This socket is normalled to the internal VCO suboctave f/2 signal (rectangle with half the frequency), if no external signal is applied the suboctave signal is used as the second signal for the balance unit

VCF:

- 24 dB low pass
- Frq: manual frequency control
- FM1: frequency modulation depth (attenuator wired to the VCF FM1 socket, the socket is normalled to the internal Envelope signal and then FM1 controls the modulation depth of the internal envelope applied to the filter)
- FM2 (socket) : second CV input for VCF without attenuator (about 1V/octave), can be used e.g. for VCF tracking by connecting the same CV which is used also for the VCO frequency
- Res: manual resonance control (up to self oscillation)
- If the VCO is turned off (waveform switch = centre position, pulsewidth control = fully CCW or CW) and the VCF resonance is set to maximum the module can be used as a sine oscillator, the tracking at socket VCF FM2 is about 1V/octave (not as precise as the VCO but much better than most other filters)
- ~ 11 octaves frequency range (~ 10 Hz ... 20kHz)

VCA:

- Gain: manual amplitude control (initial gain), can be used to open the VCA without envelope signal
- VCA (switch): used to switch between gate and envelope as control signal for the VCA, in centre position the VCA is not controlled by envelope or gate
- Note: when gate is used the VCA is controlled directly by the gate signal (i.e. hard on/off), this may lead to clicking noise under certain conditions (especially with low VCO/VCF frequencies)
- Special control scale: exponential scale in the range from about -20dB to -80/90dB, linear scale from about -20dB to 0dB
- Remark: this special control scale results in a loudness behaviour that is a bit different from pure linear or exponential VCAs
- Out: audio output of the module (= VCA output)

Envelope:

- Gate (socket): Gate input (min. +5V), can be normalled to the bus gate signal by means of a jumper
- Att: manual control for Attack
- D/R: manual control for Decay/Release
- Env. (switch): used to switch between A/D, ADSR and A/R mode of the envelope generator, in centre position (ADSR) the sustain level is fixed to about 50%
- Envelope (socket): envelope output (about +10V)
- CVT (socket): CV input for time control, by means of two internal jumpers one can select which time parameters are controlled by the CVT input (e.g. A only or D/R only or A/D/R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question)
- Envelope LED display
- Attack time range: ~ 1ms ... 5 sec (can be extended by using the CVT input)
- Decay/Release time range: ~ 1ms ... 15 sec (can be extended by using the CVT input)
Read more
 7 in stock $177.88
Click for better price!
or call +44 20 7424 1960
quote 749811
Cat: 731940 Rel: 11 Jun 19
 
Compact two-channel VCA - 4HP
Notes: Module A-130-2 is the slim version of module A-132-3 and offers essentially the same features. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-132-3. The module is primarily planned for applications where only limited space is available.

The module is composed of two identical voltage controlled amplifiers (VCA). Each VCA has a manual gain control (also named Initial Gain) and a control voltage input with attenuator. The character of the control scale can be switched to linear or exponential. All inputs and outputs are DC coupled. Consequently the VCAs can be used to process both audio and control voltages (e.g. for voltage control of the level of LFO or envelope signals). The signal input has no attenuator available but is capable to process up to 16Vpp signals (i.e. -8V...+8V) without distortion. For the processing of higher levels an external attenuator (e.g. A-183-1) is recommended.

The amplification range is 0...1. Even with a higher external control voltage the amplification remains at 1 (kind of "amplification clipping" at 1).

Controls (for each of both units):

- Gain: manual gain control (Initial Gain) in the range 0...1
- CV: attenuator for the CV input
- Lin/Exp: switches the VCA characteristic to linear or exponential, in center position the VCA is off (mute function)

Inputs and outputs (for each of both units):

- CV: control voltage input, min. +5V required for max. amplification (1) with CV control fully CW and Gain fully CCW
- In: signal input, max. 16Vpp (+8V...-8V) without distortion
- Out: signal output
Read more
 1 in stock $78.01
Click for better price!
or call +44 20 7424 1960
quote 731940
Items 1 to 50 of 999 on page 1 of 20
1  2  3  ...  20  »

Filter

Saved Searches
Save current search
Release Date
Close