100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 1 to 50 of 70 on page 1 of 2
1  2  »
FORTHCOMING
ADDAC System ADDAC812VU Module (black faceplate)
Notes: Stereo/dual VU metering module with buffered thru outputs for each channel.

An additional switch turns the beautiful lamps behind the VU meters off, in case your rack is running low on power!

A couple trimmers on the back of the module allows the user to define the VU range of each channel independently.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3.5 cm

Electrical:
. Max current with lamps on: +100mA/-10mA
. Max current with lamps off: +10mA/-10mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$146.94
coming soon $142.13
FORTHCOMING
ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate) ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate)
Notes: The Phono Pre Amplifier module- connect your turntable to it and bring it's sound straight into any of your patches.

Specs:
. Width: 4 HP
. Depth: 4.5 cm
. Current: 40mA
Read more
MRP:$135.14
coming soon $131.19
FORTHCOMING
ADDAC System ADDAC807C+ Individual Channel Stereo Outputs Module (black faceplate)
Notes: Dedicated expansion for the ADDAC807C VC Summing Mixer

Features 4 individual track post fader stereo outputs.

2Hp
2 cm deep
0mA
Read more
MRP:$68.22
coming soon $65.59
FORTHCOMING
ADDAC System ADDAC807C VC Stereo Mixer Expansion Module (black faceplate) ADDAC System ADDAC807C VC Stereo Mixer Expansion Module (black faceplate)
Notes: The ADDAC807 VC Stereo Summing Mixer can provide up to 9 stereo channels of supreme Eurorack audio.

The main modules ADDAC807A and ADDAC807B can be expanded via the ADDAC807C Expansion Console for 4 additional stereo channels.

MECHANICAL:
Format: Eurorack
Width: 38 HP
Depth: 4.5 cm
Weight: 0.6 kg (1.3 lb)

CONTROL VOLTAGE I/O:
CV inputs: i 5v

ELECTRICAL:
Max current: 250mA on each rail
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$676.99
coming soon $654.90
FORTHCOMING
ADDAC System ADDAC807A+ Individual Channel Stereo Outputs Module (black faceplate)
Notes: Dedicated expansion for the ADDAC807 VC Summing Mixer

Features 5 individual track post fader stereo outputs.

6HP
2 cm deep
0mA
Read more
MRP:$90.53
coming soon $87.46
FORTHCOMING
ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate) ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate) ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate) ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate)
Notes: All you could ever dream of from an Eurorack console, and then some.

The ADDAC807A VC Stereo Summing Mixer offers you the power, the flexibility and the gorgeous layout of a high-end audio console, in the popular Eurorack format. Starting off at 5 stereo channels, with the option to add 4 additional stereo channels via the ADDAC807C Expansion Console, its send/return options and clever matrix will ensure you have that perfect mix down in seconds. Customary to ADDAC System designs, there is enough CV control and hands-on switch options to make the ADDAC807A into an instrument in and of itself.

The ADDAC807A is accompanied by its sibling, the ADDAC807B Inputs Console. We decided to allow the user to freely define the placement of the jacks by separating the area where all your cables are located. Less clutter means more hands-on control and higher playability. The ADDAC807B Inputs Console holds all the jack inputs for the ADDAC807A Main Console, along with CV inputs and additional channel settings cause you can never have enough switches.

MECHANICAL:
Format: Eurorack
ADDAC807A Width: 56 HP
ADDAC807B Width: 24 HP
Depth: 4.5 cm
Weight: 1.5 kg (3.3 lb)

CONTROL VOLTAGE I/O:
CV inputs: i 5v

ELECTRICAL:
Max current: 650mA on each rail
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
coming soon $1,785.11
FORTHCOMING
ADDAC System ADDAC806 Bluetooth Audio Module (red faceplate)
Notes: This small module will allow you to send wireless audio signals from any bluetooth compatible device straight to your modular.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 4.5 cm

Electrical:
. Max current: 75mA on each rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
coming soon TBA
FORTHCOMING
ADDAC System ADDAC805.VS2 VC Signal Router Module (black faceplate) ADDAC System ADDAC805.VS2 VC Signal Router Module (black faceplate)
Notes: Inspired by our ADDAC701 VCO waveform mixing section, our new VC Signal Router also updates our legacy X-Fade/Panner to a stereo configuration that also allows 4 quadrant mixing.

Featuring two dedicated X-faders and a stereo VCA that can also be used as a third X-Fader. All controls have their own CV inputs and dedicated Attenuverters for precision control.

4 quadrant mixing is achieved by using the stereo Master as a X-fader between left and right channels, this way you can plug 4 audio sources and sweep/crossfade between each and any of them using the 3 x-faders. Plug any 4 sources (4 waveforms of a VCO, 4 LFOs, 4 envelopes...) and sweep through morph through or have them all mixed together.

For other configuration types Left and Right X-fader channels can be routed through the Master stereo VCA or sent directly to the outputs. A stereo Direct input can also be routed through the Master VCA or sent straight to the outputs.

The Mono Sum output always mix Left and Right outputs together allowing the possibility to use the module as a peculiar 6 channel mono mixer.

It can be used for both Audio or CV Signals.

Tech Specs:
8HP
4.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$181.06
coming soon $174.93
FORTHCOMING
ADDAC System ADDAC805 VC Xfade/Panner Module (red faceplate) ADDAC System ADDAC805 VC Xfade/Panner Module (red faceplate)
Cat: 776662 • View all Synth modules
 
crossfader & panner module
Notes: This is ADDAC System's new crossfader / panner. It can be used to crossfade between 2 signals or pan a signal from left to right.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 4.5 cm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
MRP:$181.06
coming soon $174.93
FORTHCOMING
ADDAC System ADDAC803 Quadraphonic Spatializer Module (red faceplate)
Notes: This is ADDAC System's Quadraphonic output module.

Using the VBAP (Vector-Base Amplitude Panning) principle, it allows to position a mono signal over a quadraphonic speaker array for sound spatialization. The VBAP algorithm can be controlled by Cartesian or Polar methods

Sound path is fully analogue featuring 4 high quality VCA's.

Featuring both 1/4 inch and 3.5mm jacks for adapter free connections.

Four 16 bit CV outputs mirror the signal sent to the VCA's control, when connected to 4 external VCA's these can be used for Polar Mixing of 4 diferent sound sources.

The 2 Filter CV outputs react according to the distance from the center point. The + output increases as the sound gets further away from the center of the room allowing to sync a Low Pass Filter to the input sound so that as it moves away from the center the High Frequencies get attenuated further increasing the spatialization experience. Another good practice would be to sync a reverb dry/wet signal as well so that the sounds gets more difused as it moves away from the center into the horizon.

Both the filter and the reverb should be plugged between the sound source and the 803, in order for the incoming sound to be processed before being routed to the 4 outputs.

The X and Y CV outputs mirror the cartesian sound position between 0 and +5v.

Mechanical:
. Format: Eurorack
. Width: 14 HP
. Depth: 6 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: + 5v

Electrical:
. Compatible with +-12v and +-15v power supplies?.
. Max current: 150mA on positive rail, 100mA on negative rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$451.33
coming soon $436.23
FORTHCOMING
ADDAC System ADDAC802R VCA Quintet Reversed Panel Module (red faceplate) ADDAC System ADDAC802R VCA Quintet Reversed Panel Module (red faceplate)
Notes: Our Reversed panel version of the ADDAC802 VCA Quintet.

Each of the 5 channels has:
. VCA with initial Knob
. Monitor LED
. Independent output
. Linear or logarithmic control
. Solo/Off/Mix switch that routes their audio to the Solo Channel or the Mix channel. In Off position the VCA does not go to the outputs.

All 5 VCA's can be used separately for different sources (audio or cv) or mix in 2 different chains.

Outputs:
. 1 Pre Master VCA output
. 1 Post Master VCA output
. 1 Solo output

The Solo line is also intended for Pre Listening purposes, using this output to connect your headphones through some headphone amplifier module.

Mechanical:
. Format: Eurorack
. Width: 12 HP
. Depth: 5 cm

Control Voltage I/O:
. CV inputs: i 10v

Electrical:
. Compatible with +-12v and +-15v power supplies?
. Max current: +190mA/-150mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$394.91
coming soon $382.66
FORTHCOMING
ADDAC System ADDAC802 VCA Quintet Module (red faceplate) ADDAC System ADDAC802 VCA Quintet Module (red faceplate) ADDAC System ADDAC802 VCA Quintet Module (red faceplate)
Notes: This module comes to update the previous ADDAC802 Audio Mixer.

Each of the 5 channels has:
. VCA with initial Knob
. Monitor LED
. Independent output
. Linear or logarithmic control
. Solo/Off/Mix switch that routes their audio to the Solo Channel or the Mix channel. In Off position the VCA does not go to the outputs.

All 5 VCA's can be used separately for different sources (audio or cv) or mix in 2 different chains.

Outputs:
. 1 Pre Master VCA output
. 1 Post Master VCA output
. 1 Solo output

The Solo line is also intended for Pre Listening purposes, using this output to connect your headphones through a headphone amplifier module.

Mechanical:
. Format: Eurorack
. Width: 12 HP
. Depth: 55mm

Control Voltage I/O:
. CV inputs: i 10v

Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: +190mA/-150mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$339.81
coming soon $326.90
FORTHCOMING
ADDAC System ADDAC801 Simple Mixer Module (red faceplate) ADDAC System ADDAC801 Simple Mixer Module (red faceplate)
Notes: This module allows you to mix up to three input signals, either audio or control voltages.

Each of the inputs has a dedicated amplitude knob to control the channel volume.

Two mix outputs are available, a standard out and a secondary output with phase selection.

A jumper on the board allows the user to change the phase of the second output to be normal or inverted.


Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 2.5 cm

Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$135.14
coming soon $131.19
FORTHCOMING
ADDAC System ADDAC800X High-End Outputs Module (red faceplate) ADDAC System ADDAC800X High-End Outputs Module (red faceplate)
Notes: Inspired by the legacy designs of premium vintage gear, the ADDAC800X behaves like a high-quality DI box and is all about keeping the sound coming from your Modular free from any undesired noisy interferences, making sure that what you're getting from your outputs is what your Modular is actually producing. It provides galvanic electrical isolation between the Modular system and external sources preventing impedance mismatch and ground loop induced hum. ADDAC's 800X circuit is designed around a unity 1:1 type nickel core Hammond Audio Transformer from the 140UEX series (equivalent to Jensen audio transformers).

Operating in the 20 Hz to 20 KHz range and providing exceptional shielding from external sources, this impedance matching transformer provides the 800X with two fully balanced high-end outputs (via XLR connectors).

Applying a transformer balanced output isolation has lots of advantages over other less expensive ways for dealing with ground loop issues. This method provides the chance to set a very simple and clean circuit in which the signal transfer process develops smoothly and humming free. The transformer is a device that performs both signal balancing and high-to-low (or vice-versa) impedance conversion, while rejecting straggled DC voltage and Radio Frequency Interference from signal passing through a magnetic bridge. In a transformer, two (or more) coils (called windings) of insulated wire wound around a magnetic metal core allow for its input(s) and output(s) not to be physically connected together. When an AC signal passes through the input winding (the primary), a perfectly related AC signal appears on the output winding (the secondary). This way, by the fact that signal flows via inductive coupling between the two windings of the transformer, the ADDAC 800X presents a most accurate electrical isolation between its input and output. A same number of windings on each coil guarantees that there's no gain loss when audio signal passes from the primary to the secondary windings. Furthermore, since these two windings are insulated from each other, the transformer will electrically isolate the 800X from any other device, preventing hum problems coming from an outsider ground.

LEFT IN will output sound to both channels.
Through RIGHT IN, signal will only find its way on OUT 2 (if the LEFT/RIGHT toggle is lifted up, RIGHT IN will be ignored and LEFT IN will be present in both OUTs). With both INs connected you'll have two separate outputs (LEFT IN -> OUT 1 & RIGHT IN -> OUT2). However, lifting up the LEFT/RIGHT toggle you'll also find RIGHT IN ignored and LEFT IN will fed both OUTs.

Each TRANSFORMER ISOLATED OUTPUT section has its signal overload warning led and two dedicated toggle switches: one that works as a simple amplifier / attenuator pad to +6dB / -10dB respectively, and a LIFT/FLOAT/GND toggle. This last one is a 3-way selector that lets you choose between lift, ground or floating ground (toggle's middle position) to be taken as reference for the ground point. In the LIFT position the module circuit will be lifted to ground through a 100R resistor and a 10nF capacitor and pin 1 of the XLR connection will act as the ground point. Choosing GROUND will put ground to be shared between inputs and outputs. Floating ground will leave ins and outs grounds completely apart from each other. Any of these three positions may be the best form of avoiding ground loops or any other undesired interference occurring between your modular and the sound system you're plugging it into. Try out which one of this options will work the best in a given situation.

An HEADPHONES AMPLIFIER (with VOLUME knob) connection is available for quietly working with your modular or pre-listen your sounds before making them public matter in a live situation. This section features an OPA2134 High-Performance Audio Operational Amplifier. This device presents the ideal characteristics for use with an headphones set, like ultra-low distortion and low-noise fully specified for audio applications, in combination with high-output drive capability and excellent DC performance that altogether allow for high-dynamic headroom and really superior sound quality.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 6.7 cm

Electrical:
. Max current: 100mA? on each rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$451.33
coming soon $436.23
FORTHCOMING
ADDAC System ADDAC705 Stinggy Filter Module (black faceplate)
Notes: The new ADDAC System filter, inspired by the original WASP Filter.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3 cm

Electrical:
. Max current: +12V 60mA, -12V 30mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers

Read more
MRP:$247.97
coming soon $240.53
FORTHCOMING
ADDAC System ADDAC703 Discrete Mixer Module (black faceplate) ADDAC System ADDAC703 Discrete Mixer Module (black faceplate) ADDAC System ADDAC703 Discrete Mixer Module (black faceplate)
Notes: Here's the second module of ADDAC System's 700's Heritage Series.

Inspired by Moog CP3 mixer, this is a totally discrete analog mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.

This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3 cm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
MRP:$203.36
coming soon $196.79
FORTHCOMING
ADDAC System ADDAC702 Dual VC Filter Module (black faceplate)
Notes: Here's our first Voltage-Controlled Variable Filter, inspired by the original MS-20 filter.

This module features:

Two independent filters, a High-Pass and a Low-Pass with dedicated audio inputs and outputs.

Besides individual outputs the HP and LP are also sent to a voltage-controlled Mix between the HP and LP filters.

Both Cutoff and Resonance are voltage-controlled with dedicated cv attenuator pots.

Switch for selecting between normal cutoff behaviour and an adjustable Smooth circuit to simulate a vactrol behaviour for cutoff control.

Switch for setting filters Filters in Parallel (independent) or Series (HP > LP).

Inspired by the Oscar synthesizer we added a Coupling switch to tie the HP Cutoff control to the LP Cutoff control, in this case the LP cutoff controls act as an offset from HP setting.

Three position switch selects different resonance clipping paths: diodes / no clipping / leds.

Both filters features a post Distortion/Fuzz circuit that adds extra harmonics adds an even deeper growl or extra gritiness to it.

All audio outputs (HP, Mix, LP) feature a switch for choosing phase output, allowing additive or subtractive mixes.

Three Leds monitor the amplitude of the three outputs (HP, Mix, LP).
Read more
MRP:$417.22
coming soon $403.43
FORTHCOMING
ADDAC System ADDAC701.REV2 VCO Module (black faceplate) ADDAC System ADDAC701.REV2 VCO Module (black faceplate)
Notes: This is our new VCO, we discontinued our ADDAC701 VCO a few years back and since we've been wanting to release a more stable version with better pitch tracking increasing pitch reliability further minimizing the detuning issues of analog VCO's.

For this new revision we chose to use the modern version of the CEM3340 ic from CoolAudio and add the triagle to sine circuitry of our previous VCO. This new version is extremelly stable over 7 octaves.

We also added a new Mix section which allows mixing of all waveforms controlled by 3 knobs SIN/TRI, MIX and SAW/RECT.

Tech Specs:
8HP
3.5 cm deep
60mA +12V
60mA -12V
Read more
MRP:$181.06
coming soon $174.93
FORTHCOMING
ADDAC System ADDAC611 Gotharman's VC Tube Filter Module (black faceplate) ADDAC System ADDAC611 Gotharman's VC Tube Filter Module (black faceplate)
Notes: This module was developed upon the Tubaz Filter which was released in 2014 by Gotharman but is currently no longer in production. We loved the original module so much that we officially licensed it's circuit and expanded it to feature several new functionalities.

Here's a paragraph from Gotharman regarding the original design:
"I designed it with the purpose of adding crunch, edge and distortion to my eurorack system. It is not an ideal bandpass filter, that cuts off all frequencies above and below the center frequency.
Because of its high drive, there are, in most cases, some bleedthrough of the harmonics, that should have been cut off. You might consider calling it a "Band Add" filter. The main purpose of it, was to add edge, not to be a perfect bandpass filter."

While everything he mentions is still true we believe he was being modest, It's a dirty, gritty, growling and whining monster which promises you some of the most peculiar filter sounds you'll ever hear.
However do not classify it as a "weird" distortion unit just yet because besides this hairy character it can be easily tamed (using lower volume levels) and then, with some care and intention from the user, it will transforrm itself showing it's feline purrrrr and cuddle sweet and caring, or like any good mut, showing up at night all happy, wet and dirty from a full dog's day and will lay down at your feet while wiggling it's tail howling as yawning just happy to be back home.

As such, standard volume principles do not quite apply to these units, the Audio Levels will go up to x2 amplification, Drive will go up to x11 and master outs go up to x2. The combination of these will cover all diferent qualities it can present. Overall sound can be distorted pre-Tube (raising input levels), in Tube (raising drive) or post-Tube (raising Out levels).
Higher Inputs and Drive will always be gritty, lower Inputs and Drive volumes together with higher Output levels will make the overall behaviour more mellow and closer to what a typical filter would behave like.

No standard expectations should be considered when acquiring these units, all of the tubes were built in the 70's and were bought from various sources, we always kept the premise that no tube was a bad tube (unless not really workinng) so due to each specific characteristics no module will sound exactly the same, making each unit particularly unique. This uniqueness will be particularly evident on their resonance/self-oscilating timbre as well as in their own microphonic qualities.

Regarding power and current draw, the module is designed using a low power tube, so it won't starve your eurorack power supply.

Tech Specs:
12HP
3.5cm deep
90mA +12V
60mA -12V
Read more
MRP:$360.80
coming soon $348.77
FORTHCOMING
ADDAC System ADDAC604 Dual Filter Module (black faceplate) ADDAC System ADDAC604 Dual Filter Module (black faceplate)
Notes: While developing the ADDAC105 4 Voice Cluster module, a new multimode filter to place after the summing mix stage- and the results were so postitive that it was released as a dedicated filter.

To make it more interesting, the circuitry was duplicated, to be able to use it in a stereo signal path.

To make it more versatile, a switch was added to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.
In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.
This allows immediate sync of both filter frequencies when the Stereo position is engaged.
Optionally there's a jumper in it's back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V
Read more
MRP:$203.36
coming soon $196.79
FORTHCOMING
ADDAC System ADDAC603 VC Triple Bandpass Filter Module (black faceplate) ADDAC System ADDAC603 VC Triple Bandpass Filter Module (black faceplate)
Notes: The ADDAC603 VC Triple Bandpass Filter provides three channels of bandpass filters, fantastic for sculpting complex sounds. Each of the channels feature a gain/distortion control with switch to select between x3 or x100 gain, which can cause the input signals to distort, adding another layer of harmonic interest.

The inputs are cascaded together to allow for one source to be filtered three different ways - or each filter can be used independently. The three filters also feature controls for frequency, which sets the cutoff point; width, which sets the width of the band that is being filtered; feedback, which at high settings causes the filter to self-oscillate, and level control, which sets the amplitude of the output. Frequency, bandwidth, and output level each have CV inputs with attenuverters.

A switch sets whether the filter is 24 dB or 12dB per octave. There are individual outputs with phase switch, plus a mix output and dry/wet output with adjustable control for mix balance. This module provides a wide variety of filtering options to add complex tonal shaping to your rack.

Tech Specs:

22HP
3.5 cm deep
250mA +12V
250mA -12V

Read more
MRP:$406.72
coming soon $392.50
FORTHCOMING
ADDAC System ADDAC602 Passive Ring Modulator Module (red faceplate)
Notes: A dual channel classic Passive Ring Modulator, with transformers and germanium diodes.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 3.5 cm

Electrical:
. Passive
Read more
MRP:$135.14
coming soon $131.19
FORTHCOMING
ADDAC System ADDAC601 VC Fixed Filterbank Module (black faceplate) ADDAC System ADDAC601 VC Fixed Filterbank Module (black faceplate)
Notes: The ADDAC601 Analog Filterbank will have you shaping the spectrum of your sound "tout de suite".

With its 8 fixed frequencies, this very special filterbank has two additional features that you won't find anywhere else. Each of the 8 band volumes can be controlled through a linear high performance VCA, which adds great dynamics and new abilities to the art of filtering. Additionally this module also doubles as an envelope follower, with a dedicated CV output per band.

It features numerous output options: you can select between individual bands, the full processed sound, a wet/dry signal and even choose between odd or even frequencies.

Plus you can add up to two different signals, which are mixed internally by the ADDAC601 inputs.

. Format: Eurorack
. Width: 20 HP
. Depth: 5.5 cm

Control Voltage I/O:
. CV inputs: i 5v
. CV outputs: 0 - 10v

Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: +340mA/-350mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$406.72
coming soon $392.50
FORTHCOMING
ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate) ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate)
Notes: Inspired and officially licensed from Teia's Stochastic Function Generator which was introduced in 2013 but is no longer available. This earlier version served as an inspiration, but with a completely rebuilt and reprogrammed mcu to a fully featured 4 voice 2 stage envelope and slew generator.

ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplateADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate
This expansion allows extra I/O to the ADDAC506, namelly:

Four trigger inputs for the random engine.

Four CV random outputs from the random engine.
Read more
MRP:$101.02
coming soon $98.39
FORTHCOMING
ADDAC System ADDAC506 VC Stochastic Function Generator Module (black faceplate) ADDAC System ADDAC506 VC Stochastic Function Generator Module (black faceplate)
Notes: Inspired and officially licensed from Teia's Stochastic Function Generator which was introduced in 2013 but is no longer available. This earlier version served as an inspiration, but with a completely rebuilt and reprogrammed mcu to a fully featured 4 voice 2 stage envelope and slew generator.

This new module + expansion is ADDAC System's take on a different envelope/slew generator. It's a fully featured Quad Analogue Core Envelope Generator and Slew Processor with digital control which also incorporates built in random generators to control the Rise and Fall times.

Covering the full range from short sharp notes to long slow sweeps of up to 6 minutes. Together with the random generators it excels when used for drone soundscapes.

Used as a Slew Processor the random generators act as dynamic modulation sources affecting the rise and fall slew speed.

Fully featured outputs act as encouragement to self-patching creating interdependent envelopes acting in sync.

width: 20HP
200mA +12V
150mA -12v

ADDAC506B:
width: 2HP
10mA +12V
10mA -12v

CV OUTPUT RANGE:
Each channel CV output range can be set with the [Amplitude] and [Offset] attenuverters.
Amplitude can be set to a maximum of 10v peak to peak(pp), ex 0 to +10v or -5v to +5v.
Offset can as a maximum range of 20v peak to peak and allows to offset the CV to i10v.
Read more
MRP:$383.10
coming soon $370.63
FORTHCOMING
ADDAC System ADDAC504 Probabilistic Generator Module (black faceplate)
Notes: This is a complex Gate / CV generator based on probabilities.

Functions:

Knob 1:
%1 = Gate 1 Probability
5TG = Fifth Output Type: Trigger/Gate
N1 = Note 1 Tuning

Knob 2:
%2 = Gate 2 Probability
T.SIZE = Trigger Size
N2 = Note 2 Tuning

Knob 3:
%3 = Gate 3 Probability
DIR = LOCK Mode Direction: Backwards/pendulum/forward
N3 = Note 3 Tuning

Knob 4:
%4 = Gate 4 Probability
S.SIZE = LOCK Mode Sequence Size: up to 16 steps
N4 = Note 4 Tuning

Knob 5:
SWING X = Clock Swing X: 1 to 16
Y = Clock Swing Y: 1 to 16
N5 = Note 5 Tuning

Gate Outputs Behaviour:

At every clock input, based on the four knobs probability settings, the module will select one active gate out, only one of the five gates will be active at all times. All Gate outputs can also behave as a Trigger instead, Trigger size can also be adjusted.

The knobs set the probabilities of each gate to be chosen, here's an example of how this operates

With all first four knobs at 12 o'clock the first Gate has 50% of being the chosen one, the remaining 50% of the times will be passed through the next knobs. So Gate 2 at 12 o'clock has 50% of the remaining 50% left by setting one, which leaves it with 25% chance of being the chosen one, the remaining 25% will be passed through Knob 3 which will have 12.5% chance of being the chosen one, the remaining 12.5% will be sent to Setting 4 which will have a probability of 6.25%. The remaining percentage left by the 4 Settings will always be the probability of Gate 5, in this case the remaining 6.25%.

Here's a couple more examples.

All knobs at 12 0'clock
Setting 1 = 50% chance, 50% left for remaining settings.
Setting 2 = 25% chance, 25% left for remaining settings.
Setting 3 = 12.5% chance, 12.5% left for remaining setting.
Setting 4 = 6.25% chance, 6.25% left for Gate 5.

All knobs at 9 0'clock (aproximate values)
Setting 1 = 20% chance, 80% left for remaining settings.
Setting 2 = 16% chance, 64% left for remaining settings.
Setting 3 = 12.8% chance, 51.2% left for remaining setting.
Setting 4 = 10.24% chance, 40.96% left for Gate 5.

Tuning and CV outputs:

While in the Tuning page you can use all knobs to set the 5 pitches
When in tuning page knobs should be rotated one at a time!
While rotating the knobs the CV out 4 will be used as a monitor, the other 3 CV outs will be behaving normally.
The module detects which pot is being rotated and outputs the relative pitch CV on CV out 4 for all knobs.
While on this page the tuning will be quantized or not relative to the panel Quantize on/off switch. Even if this process is done in quantized mode the module always store the free value in order to allow quantisation to be turned off later.
Once you're happy with the tuning you can exit the page, new values are stores to memory while exiting the page.
When tuning the module detects both the note selected and the relative octave.

CV Outs behaviour
This will be easier to explain with examples

Let's say we tuned these notes:

C0 or 0v
D1 or 1.166v
F2 or 2.466v
G3 or 3.583v
A4 or 4.75v

1. Next Logic out calculated is gate 3.
CV outs 1-2-3 will output a note in octave 2, the note itself is randomised from the 5 tuned notes (C,D,F,G,A).
CV out 4 will output the exact note tuned with knob 3 (F2)

2. Next Logic out calculated is gate 5.
CV outs 1-2-3 will output a note in octave 4, the note itself is randomised from the 5 tuned notes (C,D,F,G,A).
CV out 4 will output the exact note tuned with knob 5 (A4)

Out 1-2-3 is octave related
Out 4 always output the original tuned note

Knobs Pages access:

MENU/TRIGGER button is used to access pages
After power up it gets to first page by default.

Page 1:
MENU/TRIGGER button is off and blinks with clock inputs

Page 2:
Pressing the MENU/TRIGGER button for 3 seconds the Button Led lights up meaning you're in Page 2, changing knobs will affect the secondary function.
Releasing the button jumps to Page 1

Page 3:
Pressing the MENU/TRIGGER button for 3 seconds the Button Led lights up, keeping it pressed without moving any knob for 3 more seconds makes the Button led go off. At this time you can release the button. After that the button will light up meaning you're in page 3, or the tuning page.
Pressing the button one time jumps to Page 1

Soft-Recall and Memory:

Knob positions are stored in memory while in operation to be able to have a soft recall of the settings, so when jumping from page to page you'll need to rotate the knob until you find the last setting and only then they start to operate. Whenever the pot crosses the last setting point the MENU/TRIGGER button will blink indicating that the knob is now active.

Page 2 & 3 have permanent memory so it will always load the last settings after power up.
Page one is volatile and powers up with the initial knobs settings.
Read more
MRP:$417.22
coming soon $403.43
FORTHCOMING
ADDAC System ADDAC503 Marble Physics Module (red faceplate) ADDAC System ADDAC503 Marble Physics Module (red faceplate)
Notes: Newtonian physics on a modular synth! The ADDAC503 Marble Physics is a CV generator based on the mechanics behavior of a marble on a tray.

Through this realtime physics simulator you'll be able to control several parameters that will affect the behavior of a model of a spherical object against a plane. You can tilt the plane or bump the marble with a certain strength, which will cause it to roll and bounce on elastic walls.

The model will output the object's XY position or velocity and you can control other physical parameters, like the walls' elasticity or the strength of a bump. When the marble hits walls the bounce output triggers and you can additionally lock the X axis for a one dimension simulation. Finally you can also set the overall speed of the simulation.

By controlling all of these properties you be able simulate several scenarios where the marble falls, gets gently pulled by gravity, orbits indefinitely or bounces on walls like a pinball. Truly engaging physics simulations!

Mechanical:
. Format: Eurorack
. Width: 10 HP
. Depth: 5.2 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 5v

Electrical:
. Max current: 150mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$372.61
coming soon $359.70
FORTHCOMING
ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate) ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate)
Notes: The ADDAC501B expansion is connected directly to the ADDAC501 Complex Random. It extends functionality by adding gate outputs to the random generators.

If ADDAC501 generates a new random above the average between Minimum and Maximum, then the respective gate on ADDAC501B is triggered.

There are three pairs of gates, corresponding to the respective outputs on ADDAC501. Each gate pair has both positive and inverted outputs.

This expansion module also offers a dedicated knob for gliding effects. With it you can have a voltage ramp between two consecutive random numbers- randomized "legato" expressiveness.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 5 cm

Control Voltage I/O:
. Gate outputs: 0 - 5v

Electrical:
. Connects directly to ADDAC501
. Max current: 20mA
Read more
MRP:$135.14
coming soon $131.19
FORTHCOMING
ADDAC System ADDAC501 Complex Random Module (red faceplate) ADDAC System ADDAC501 Complex Random Module (red faceplate)
Cat: 776328 • View all Synth modules
 
random CV generator module
Notes: The ADDAC501 does random CV generation and outputs it through four independent channels. You can control the desired range of voltages and time frequency at which new values are generated.

It can also be triggered by an external CV source and the output voltages can be either free or quantized (if you prefer to have a standard C Major scale).

Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 5 cm

Control Voltage I/O:
. CV inputs: 0 - 10v
. CV output: 0 - 5v (0 - 10v through jumper)
. Gate in threshold: 2.5v

Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: 150mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$339.81
coming soon $326.90
FORTHCOMING
ADDAC System ADDAC402B HRG Expansion Module (red faceplate) ADDAC System ADDAC402B HRG Expansion Module (red faceplate)
Notes: ADDAC402B MIDI Expansion allows full I/O Midi control of ADDAC402 plus access to a powerfull midi interface, with:

Midi Sync:
Allows the module to synchronize with any external MIDI device’s Clock, including transport messages like play, stop and continue.

CV to MIDI:
5 CV inputs (Fills 1 to 4 and Assign) to MIDI Notes and/or CC messages, the Note and CC number can be independently configured via the Configuration Menu.
These CV inputs can be sent on independent MIDI Channels, for ex: Fills 1 to 4 on MIDI Channel 1 and Assign on MIDI Channel 2.

MIDI Controller:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be sent to MIDI Out as CC controls as any standard MIDI controller. The individual CC numbers can be configured through the Configuration Menu.

MIDI to Gate:
All 4 Gate outputs can be controlled/sequenced from an external MIDI device.
For ex: we can configure Gate 1 to be responsive to CC 1, Gate 2 to CC 2 and so on. Everytime CC 1 gets a value of 127 Gate 1 will be turned ON, if it gets a 0 value Gate 1 will be turned OFF.

MIDI Control:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be controlled/sequenced from MIDI CC controls. This allow full automation of the module via MIDI
The individual CC numbers can be configured through the Configuration Menu and includes a midi learn feature for easier configuration.
Also controllable via MIDI is the change of Presets and Modes.
Read more
MRP:$112.83
coming soon $109.33
FORTHCOMING
ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate) ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate) ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate)
Notes: This module is a powerful rhythm generation machine- it features 4 voices of gate outputs (including inverted outputs for logic NOT sequences) where each voice can have independent lengths, all configurable with direct knobs anc cv inputs.

Perfect for precise polyrhythmic patterns and all sorts of non-linear sequencing.

The module works by 6 different rhythm generation "algorithms / principles":
Euclidean (equal distribution)
Golomb Rulers (inequal distribution)
Probabilistic (predictable distribution)
Game Of Life (organic progression)
Footwork'n (inducted error progression)
Pong (voltage controlled Pong game)

Plus a 4 channel Gate Sequencer Mode with up to 32 steps and 16 storable presets.

Add ADDAC402B Expansion for full I/O Midi control plus access to a powerful midi interface, with:
Midi Sync
5 cv to midi channels (notes and/or cc)
4 midi to gate channels
All panel controls (knobs, switches and push buttons) as cc controls.

All fully configurable with a midi learn feature for easier configuration.

MECHANICAL:
Format: Eurorack
Width: 20 HP
Depth: 5.5 cm

CONTROL VOLTAGE I/O:
CV inputs: 0 to +10v

ELECTRICAL:
Max current: 150mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$495.94
coming soon $479.97
FORTHCOMING
ADDAC System ADDAC401 Gated Envelope Follower VS2 Module (red faceplate) ADDAC System ADDAC401 Gated Envelope Follower VS2 Module (red faceplate)
Notes: With the ADDAC401 Envelope Follower you'll be able to use the volume of any sound source to control your synthesis.

This envelope follower has an interesting twist: besides outputting the volume information through a regular CV output, it also sports 8 independent gate outputs, triggered by the corresponding levels of the VU meter.

You can also control the offset on the gated outputs, either by CV or by steps through a special dedicated gate input.

Input Level and Decay controls allow you to achieve good envelope follower amplitude reaction.

Envelope Gain and Offset allows to set the envelope CV output to any desired CV range.

Monitor Leds for both the CV output and for the digital detection circuit.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 4.5 cm

Control Voltage I/O:
. CV output: i10v
. Gate input: 0 - 5v (threshold: 2.5v)
. Gate outputs: 0 - 5v

Electrical:
. Max current: 110mA +12v & 20mA on -12V
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$259.78
coming soon $251.46
FORTHCOMING
ADDAC System ADDAC307 Heart Sensing Module (black faceplate) ADDAC System ADDAC307 Heart Sensing Module (black faceplate)
Notes: Another addition to the ADDAC300's Expressive Controls Series.

Preceded by the release of the ADDAC303 Muscle Sensing module, this is the second module made to take advantage of the physical body as a control source.

This module originated from a simple idea: using one's heart beat as a control source.

Using a clip-on sensor, that can be attached to a finger or an ear lobe, the user's heart rate will be aquired by sensing the blood flow passing under the sensor. This pulse will generate a trigger and an AD envelope.

Clip-on sensor will be provided with the module.

Tech Specs:
4HP
3.5cm deep
60mA +12V
10mA -12V
Read more
MRP:$181.06
coming soon $174.93
FORTHCOMING
ADDAC System ADDAC306 VC Transitions Module (black faceplate) ADDAC System ADDAC306 VC Transitions Module (black faceplate)
Notes: ADDAC306 is a 5 channel multi-directional CV generator.

You can think of it as a "sweet spot" controller, or a hands-on way of transiting from one state to another.

Each of the five channels has MINIMUM, SPAN and DIRECTION controls, a common CV IN and a common TRANSITION CONTROLLER slider.

MINIMUM sets the minimum channel voltage.

SPAN sets the voltage range of the channel.
It essentially sets the maximum voltage that can be output from the channel, relative to what the current channel MINIMUM is. For a given SPAN value, if the MINIMUM voltage is changed then the maximum voltage output from that channel will also change respectively.

DIRECTION sets whether the voltage transition for each channel goes from MINIMUM to maximum, or maximum to MINIMUM.

The TRANSITION CONTROLLER slider controls the transition from the minimum value (A) to the maximum value (B) or vice versa, according to the settings of each independent channel.
Moving this slider generates 5 different voltages with 5 different ranges and directions. The transition can also be operated from a CV source at the CV IN, in which case the slider position acts as an attenuator for the incoming voltage.

The maximum range of each channel can be set to either 5 or 10 volts, by 5 jumpers in the back of the module. Only positive voltages are generated at the output.

Using the CV IN you can use two ADDAC306 modules to expand your control options to 9 voltage outputs under one common slider control.
Use the VC Transitions to multiply the polyphony of a single CV sequencer by passing its outputs through the ADDAC207.
VC Transition makes for an awesome state transition controller. Plug its outputs to various CV controller parameters of your audio effects modules. Set the slider to position A, and set the minimum values for each channel. Then move the slider to position B and set the SPAN settings for each channel. Use the TRANSITION CONTROLLER slider to morph from state A to state B and backwards. Flip the DIRECTION switches to change the direction of the transition for each channel. Use the CV IN to automate the transition using LFOs, ADSRs or sequencers.
Plug the output of your ADSR envelope to the CV IN and set the channels differently to get 5 different ADSRs from one common source.


This module was developed based on an initial idea by Konstantine Fioretos.
Read more
MRP:$135.14
coming soon $131.19
FORTHCOMING
ADDAC System ADDAC305 Manual Latches Module (red faceplate) ADDAC System ADDAC305 Manual Latches Module (red faceplate)
Notes: The ADDAC305 Manual Latches is a combination of 8 manual latching switches in a small and elegant module: each button toggles between Gate high / Gate low when pressed, outputting a 5V gate signal. Additionally 4 of the 8 available latches, sport inputs and can act as manual latching switches, allowing the incoming signal to pass to the output when the button is toggled.

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
Gate outputs: 0 +5v

ELECTRICAL:
Max current: 10mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$107.58
coming soon $103.86
FORTHCOMING
ADDAC System ADDAC304 Manual Gates Module (red faceplate) ADDAC System ADDAC304 Manual Gates Module (red faceplate)
Notes: With the ADDAC304 Manual Gates, you'll be getting 8 manual gates (0 +5v) in a nifty package - a perfect way to perform on and control your modular system.

The ADDAC304 comes with an interesting twist: 4 out of the 8 available gates can act as momentary switches, outputting the signals in their respective inputs when each gate's button is pressed.

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
Gate outputs: 0 +5v

ELECTRICAL:
Max current: 10mA
Read more
MRP:$90.53
coming soon $87.46
FORTHCOMING
ADDAC System ADDAC303 Muscle Sensing module (red faceplate) ADDAC System ADDAC303 Muscle Sensing module (red faceplate) ADDAC System ADDAC303 Muscle Sensing module (red faceplate)
Notes: This module introduces a totally new interaction principle for the Eurorack format, using electrodes to sense body muscles tension.

You can stick them to your arm and clench your fist, to your leg and tap your tempo, to your band bass player or drummer.

Module ships with electrodes.

Pads are reusable and replaceable.

Specs:
. Width: 4 HP
. Depth: 4 cm
. Max current: 60mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$203.36
coming soon $196.79
FORTHCOMING
ADDAC System ADDAC302 Nchunk Control Module (red faceplate)
Notes: The ADDAC302 Nchunk Control module allows you to connect a Nintendo Nunchuck controller to your modular synth, featuring a two-axis thumb joystick, a three-axis accelerometer and two trigger buttons.

The module provides CV outputs for all of the Nunchuck's parameters and special functions to remap the CV outputs. The remapping can be both continuous or step-by-step and can be accessed through either the dedicated CV inputs or the manual controls.

A specially dedicated Mix output averages between the first two CV outputs, a very useful feature for continuous control parameters.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 4 cm

Control Voltage I/O:
. CV inputs: 0 - 10v
. CV outputs: 0 - 5v
. Gate in threshold: 2.5v

Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: 100mA?
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$282.08
coming soon $273.33
FORTHCOMING
ADDAC System ADDAC301C Dual Sustain Pedal Switcher Module (red faceplate)
Notes: Passive dual sustain pedal switcher.

Plug any CV or audio source through it and control its state (on / off) through any standard sustain pedal.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 3 cm
Read more
MRP:$68.22
coming soon $65.59
FORTHCOMING
ADDAC System ADDAC301B Dual Expression Pedal Attenuator Module (red faceplate)
Notes: Passive dual expression pedal attenuator.

Plug any CV or audio source through it and control its amplitude through any standard expression pedal.

Invert switch for inverting the expression pedal action.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 3 cm
Read more
MRP:$73.47
coming soon $71.06
FORTHCOMING
ADDAC System ADDAC301 Floor Control Module (red faceplate)
Notes: While ADDAC were working on the new VC Stompboxes several expression pedals were tested and it became clear that most often, while playing a modular system, your hands are busy.
It's also normal to have an expression pedal lying around somewhere, so ADDAC have brought these back, cleaned up the dust and put them to good use.
This module allows the connection of any standard expression and sustain pedal.

The expression pedal action can be fine-tuned with Range and Offset knobs.
Range defines the voltage range (-10v, +10v).
Offset transposes the range by (-5v, +5v).
Two leds, plus and minus, monitor the CV Output
Positive and inverted output jacks.
The sustain pedal action will generate a gate signal on the gate output.
One led monitors this output.
The module also features a bus board +5v Adaptor, this will be able to provide +5v to any bus board.
This feature can be removed through a jumper on the back of the module.

Specs:
. Width: 4 HP
. Depth: 4 cm
. Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$78.72
coming soon $76.53
FORTHCOMING
ADDAC System ADDAC300 Power Starvation Module (75mA version) (red faceplate)
Notes: Power starvation is the first hack that any "DIY'er" learns. It's also one of the hacks that can generate some of the most interesting sonic effects in circuit bending, and ADDAC have applied this principle to the modular world. Plug any module of your choice through it and independently tune it's i power.

This will have most interesting effects in analog modules: filters, delays, mixers. They can either go silent or start screaming at your ears, going berserk with the lack of current to behaving normally.

Two IDC connectors on the back allow to independently plug 2 modules of your choice.

Bypass switches for easy operation.

The trimmers allow for setting a minimum voltage plateau. Most modules will shut down from 3 to 10v. These trimmers allow to set them at the right sweet spot and enjoy the full range of the pot for the power starving.

This module uses special potentiometers which are way more expensive than regular ones.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 4 cm
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$101.02
coming soon $98.39
FORTHCOMING
ADDAC System ADDAC300 Power Starvation Module (150mA version) (red faceplate)
Notes: Power starvation is the first hack that any "DIY'er" learns. It's also one of the hacks that can generate some of the most interesting sonic effects in circuit bending, and ADDAC have applied this principle to the modular world. Plug any module of your choice through it and independently tune it's i power.

This will have most interesting effects in analog modules: filters, delays, mixers. They can either go silent or start screaming at your ears, going berserk with the lack of current to behaving normally.

Two IDC connectors on the back allow to independently plug 2 modules of your choice.

Bypass switches for easy operation.

The trimmers allow for setting a minimum voltage plateau. Most modules will shut down from 3 to 10v. These trimmers allow to set them at the right sweet spot and enjoy the full range of the pot for the power starving.

This module uses special potentiometers which are way more expensive than regular ones.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 4 cm
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$135.14
coming soon $131.19
FORTHCOMING
ADDAC System ADDAC222 4x6 Voices 1V/Octave to MIDI Notes Module (red faceplate)
Notes: Most recent from the ADDAC MIDI Series, the 222 converts 4 CV inputs to four distinct polyphonic MIDI NOTES streams, with up to 6 note voices per input. This allows the user to send midi notes to external midi devices straight from your modular: just plug it into your classic synth or your favourite virtual instruments. Combined with the ADDAC221 you can fully control any external midi device.

Ships with 2 stereo jack to din5 midi cables.
Read more
MRP:$406.72
coming soon $392.50
FORTHCOMING
ADDAC System ADDAC22110x9 Channel CV to CC MIDI System Module (red faceplate)
Notes: The ADDAC221 is a standard midi controller that allows CV inputs, converting CV variations to MIDI Control Change Messages. This allows interaction with your favourite standalone synthesisers and softwares through simple plug-and-play midi control.

A dedicated software permits the user to store up to 9 different presets, where the CC values of each channel can be configured as wished.

This way the user can preset his favourite synths to control filters, envelopes and whatnot from CC messages coming from the module CV inputs.

Ships with 2 stereo jack to din5 midi cables.
Read more
MRP:$360.80
coming soon $348.77
FORTHCOMING
ADDAC System ADDAC217 Quad Gate to Trigger Module (black faceplate) ADDAC System ADDAC217 Quad Gate to Trigger Module (black faceplate)
Notes: Following ADDAC System's T-Networks series, the importance of having the right input signal for firing drum modules or envelopes was realised. Gates and Triggers are often looked at as similar signals but at times it really makes a difference and results will change drastically depending if a Gate or a Trigger is fed to the input of such modules.

This led to the simple yet effective Gate to Trigger.
A four channel converter with bypass switch for each channel.

Any input Gate will be limited to a 1ms Trigger.

Tech Specs:
3HP
2.5 cm deep
10mA +12V
10mA -12V
Read more
MRP:$78.72
coming soon $76.53
FORTHCOMING
ADDAC System ADDAC216 Sum & Difference Module (black faceplate) ADDAC System ADDAC216 Sum & Difference Module (black faceplate)
Notes: There are two equal sections in this module labeled A and B.

This module is a peculiar type of mixer that instead of just summing two input signals (X & Y) it also allows the possibility to subtract the two signals.
It works both for audio and CV signals and hence the possibility to get the diference of two CVs or cancel the phase of two audio signals. The resulting signal, of sum or subtraction, is then routed through a switchable (on/off) full rectification circuit labeled: Absolute. After this the gain of the mixed signal goes through another attenuverter labeled: Amplitude to control the resulting signal gain which, being an attenuverter, also allows the possibility to invert the incoming signal. After the Amplitude comes an AC/DC coupling switch followed by an bipolar Offset knob.

Besides the normal output, there's also an inverted output for each of the A & B sections.

The outputs of section A & B are also summed and sent to the Average Output.

Using a single input, just the X or Y input, the module can also be used as a simple dual Attenuverter & Offset CV processor with full rectification and AC coupling options.

Average mix output of both sections.
Read more
MRP:$141.70
coming soon $136.66
FORTHCOMING
ADDAC System ADDAC215 Dual S&H+ Module (black faceplate) ADDAC System ADDAC215 Dual S&H+ Module (black faceplate)
Cat: 776254 • View all Synth modules
 
dual sample & holds module
Notes: This new module should not be judged by it's size, at 6hp it's packed with features.

At its core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it's own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there's also 4 extra outputs: Noise, Difference, Average and Sum. The Noise output is coming from the noise source, the Difference output is the subtraction of section A minus section B, the Average output is the sum of both A plus B and then divided by 2 and finally the Sum output is the sum of both A plus B sections.

MECHANICAL:
Format: Eurorack
Width: 6 HP
Depth: 4 cm

ELECTRICAL:
Max current: +50mA/-50mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$141.70
coming soon $136.66
FORTHCOMING
ADDAC System ADDAC214 VC Rotator Module (red faceplate) ADDAC System ADDAC214 VC Rotator Module (red faceplate)
Notes: This is the VC Rotator, a stepped routing module for any type of signal (audio, cv, gate, trigger...)

Similar to a VC switcher but in this case there's the same number of inputs than outputs so, instead of 4 to 1 or 1 to 4, this module is always 4 to 4 but it can be patched for 2 to 2 and 3 to 3 step actions.

All four inputs get routed to the four outputs depending on the CV and Clock controls and are divided into 4 routing steps:
1. routes all inputs to the same number output: 1:1, 2:2, 3:3, 4:4
2. routes all inputs to an offset of 1: 2:1, 3:2, 4:3, 1:4
3. routes all inputs to an offset of 2: 3:1, 4:2, 1:3, 2:4
4. routes all inputs to an offset of 3: 4:1, 1:2, 2:3, 3:4

Direction determines if the clock input goes forward or backwards.
Going forward it can be set to 2-3 or 4 steps using the Rotate knob offset, going backwards always sync to 4 steps even if offseted by the Rotate knob.
For 2 & 3 step action input 1 is normalled to input 3 and input 2 is normalled to input 4.

Reset resets the internal clock to the first step.

Pendulum, external sequencing or any complex CV actions can be achieved using the CV input and dedicated attenuverter.

4 leds monitor which input is routed to output 1.
Read more
MRP:$181.06
coming soon $173.83
FORTHCOMING
ADDAC System ADDAC213B Eurorack Bridge Module (black faceplate) ADDAC System ADDAC213B Eurorack Bridge Module (black faceplate)
Notes: The ADDAC213B is the second pair of modules from ADDAC's Eurorack Bridge system.

A pair of ADDAC213Bs can be used in standalone to send/receive 8 CV or audio signals between different points inside the same case or as an expansion to the main pair of Eurorack Bridge modules, the ADDAC213As.

Two ADDAC213B modules can be connected to each other with the use of a single ribbon cable and then used inside a case to carry signals between distant points without the need for long cables. Less clatter, less spaghetti- more space of your fingers on those knobs!

ADDAC213Bs always come in pairs. A single pair can send & receive up to 8 CV or audio signals between different points in your case at the same time. The modules can be installed in normal position or a 180 degree position to fit any need.

As an Expansion to an ADDAC213A.

Each ADDAC213B connected to the backside of an ADDAC213A adds 8 more channels to the main bridging functionality of the ADDAC213A.

Up to 2 ADDAC213B can be connected to an ADDAC213A module, expanding the bridging between two difference cases to a total of 24 channels.

If you're looking for a simple one-cable bridge between your various cases, then look no further than the ADDAC213A.

Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 3 HP
. Depth: 2.5 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$90.53
coming soon $87.46
Items 1 to 50 of 70 on page 1 of 2
1  2  »

Filter

Saved Searches
Save current search
Release Date
Featured
Close