100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 1 to 17 of 17 on page 1 of 1
FORTHCOMING
ADDAC System ADDAC402B HRG Expansion Module (red faceplate) ADDAC System ADDAC402B HRG Expansion Module (red faceplate)
Notes: ADDAC402B MIDI Expansion allows full I/O Midi control of ADDAC402 plus access to a powerfull midi interface, with:

Midi Sync:
Allows the module to synchronize with any external MIDI device’s Clock, including transport messages like play, stop and continue.

CV to MIDI:
5 CV inputs (Fills 1 to 4 and Assign) to MIDI Notes and/or CC messages, the Note and CC number can be independently configured via the Configuration Menu.
These CV inputs can be sent on independent MIDI Channels, for ex: Fills 1 to 4 on MIDI Channel 1 and Assign on MIDI Channel 2.

MIDI Controller:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be sent to MIDI Out as CC controls as any standard MIDI controller. The individual CC numbers can be configured through the Configuration Menu.

MIDI to Gate:
All 4 Gate outputs can be controlled/sequenced from an external MIDI device.
For ex: we can configure Gate 1 to be responsive to CC 1, Gate 2 to CC 2 and so on. Everytime CC 1 gets a value of 127 Gate 1 will be turned ON, if it gets a 0 value Gate 1 will be turned OFF.

MIDI Control:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be controlled/sequenced from MIDI CC controls. This allow full automation of the module via MIDI
The individual CC numbers can be configured through the Configuration Menu and includes a midi learn feature for easier configuration.
Also controllable via MIDI is the change of Presets and Modes.
Read more
MRP:$112.54
coming soon $109.05
FORTHCOMING
ADDAC System ADDAC213A Eurorack Bridge Module (black faceplate) ADDAC System ADDAC213A Eurorack Bridge Module (black faceplate)
Notes: A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.

Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case. Less clatter, less spaghetti, faster connection! There's nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As.The modules can be installed in normal position or a 180 degree position to fit any need and any case design.

Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels. With two 2 ADDAC213Bs connected to each ADDAC213A module, you'll have a total of 24 channels going between your cases with a simple one-cable bridge. Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable.

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$107.31
coming soon $103.59
FORTHCOMING
ADDAC System ADDAC215 Dual S&H+ Module (black faceplate) ADDAC System ADDAC215 Dual S&H+ Module (black faceplate)
Cat: 776254 • View all Synth modules
 
dual sample & holds module
Notes: This new module should not be judged by it's size, at 6hp it's packed with features.

At its core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it's own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there's also 4 extra outputs: Noise, Difference, Average and Sum. The Noise output is coming from the noise source, the Difference output is the subtraction of section A minus section B, the Average output is the sum of both A plus B and then divided by 2 and finally the Sum output is the sum of both A plus B sections.

MECHANICAL:
Format: Eurorack
Width: 6 HP
Depth: 4 cm

ELECTRICAL:
Max current: +50mA/-50mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$141.33
coming soon $136.30
FORTHCOMING
ADDAC System ADDAC105 4 Voice Cluster Module (black faceplate) ADDAC System ADDAC105 4 Voice Cluster Module (black faceplate)
Notes: Following the ADDAC103 T-Networks, this new module is inspired by it's simplicity. This is a 4 voice Square Oscillator with VCA, FM switch and a slew decay for the incoming Trigger IN. All voices are then sent through a Multimode Filter.

Each voice has it's own VCA input where any input is accepted (Trigger, Gate, CV) The [DECAY] controls the slew decay applied to the incoming signal, if [DECAY] is fully anti-clockwise then it works as a Mute. The [FM ON] switches activate/deactivate the FM input coming from the previous voice: Voice 1 FM comes from voice 4, voice 2 FM comes from voice 1, and so on, so you can FM all of them in a FM loop.

All 4 voices are summed and sent through a filter with controls over [CUTOFF] with an Attenuverter for the CV input and [RESO- NANCE]. Three filter outputs are provided [LOWPASS], [BANDPASS] and [HIGHPASS]

The [EXTERNAL IN] input can be routed through a jumper on the back of the module allowing the incoming signal to go to:
the filter input for processing an external audio source.
all of the 4 voices Frequency control allowing for some experi- mental CV control over pitch of all 4 voices at the same time (due to the specificities of the circuit and to keep the module at a low price these inputs are not callibrated to 1v/octave).

Read more
MRP:$112.54
coming soon $107.95
FORTHCOMING
ADDAC System ADDAC103 T-Networks Module (black faceplate) ADDAC System ADDAC103 T-Networks Module (black faceplate)
Cat: 776114 • View all Synth modules
 
4-voice percussion module
Notes: Inspired by Twin T-Networks circuits used in many lengendary drum machines, ADDAC system have developed a simple and straight forward 4 voice percussion module with frequency controls for each of its voices.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.

Tech Specs:
6HP
2.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$112.54
coming soon $107.95
FORTHCOMING
ADDAC System ADDAC202 Amplifiers Module (red faceplate) ADDAC System ADDAC202 Amplifiers Module (red faceplate)
Notes: A dual channel Amplifier that either boosts your signals up to 10 times the original input or attenuates it to zero.

It also features two leds per channel, to monitor your output polarity.

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$134.79
coming soon $129.76
FORTHCOMING
ADDAC System ADDAC300 Power Starvation Module (150mA version) (red faceplate)
Notes: Power starvation is the first hack that any "DIY'er" learns. It's also one of the hacks that can generate some of the most interesting sonic effects in circuit bending, and ADDAC have applied this principle to the modular world. Plug any module of your choice through it and independently tune it's i power.

This will have most interesting effects in analog modules: filters, delays, mixers. They can either go silent or start screaming at your ears, going berserk with the lack of current to behaving normally.

Two IDC connectors on the back allow to independently plug 2 modules of your choice.

Bypass switches for easy operation.

The trimmers allow for setting a minimum voltage plateau. Most modules will shut down from 3 to 10v. These trimmers allow to set them at the right sweet spot and enjoy the full range of the pot for the power starving.

This module uses special potentiometers which are way more expensive than regular ones.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 4 cm
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$134.79
coming soon $130.85
FORTHCOMING
ADDAC System ADDAC306 VC Transitions Module (black faceplate) ADDAC System ADDAC306 VC Transitions Module (black faceplate)
Notes: ADDAC306 is a 5 channel multi-directional CV generator.

You can think of it as a "sweet spot" controller, or a hands-on way of transiting from one state to another.

Each of the five channels has MINIMUM, SPAN and DIRECTION controls, a common CV IN and a common TRANSITION CONTROLLER slider.

MINIMUM sets the minimum channel voltage.

SPAN sets the voltage range of the channel.
It essentially sets the maximum voltage that can be output from the channel, relative to what the current channel MINIMUM is. For a given SPAN value, if the MINIMUM voltage is changed then the maximum voltage output from that channel will also change respectively.

DIRECTION sets whether the voltage transition for each channel goes from MINIMUM to maximum, or maximum to MINIMUM.

The TRANSITION CONTROLLER slider controls the transition from the minimum value (A) to the maximum value (B) or vice versa, according to the settings of each independent channel.
Moving this slider generates 5 different voltages with 5 different ranges and directions. The transition can also be operated from a CV source at the CV IN, in which case the slider position acts as an attenuator for the incoming voltage.

The maximum range of each channel can be set to either 5 or 10 volts, by 5 jumpers in the back of the module. Only positive voltages are generated at the output.

Using the CV IN you can use two ADDAC306 modules to expand your control options to 9 voltage outputs under one common slider control.
Use the VC Transitions to multiply the polyphony of a single CV sequencer by passing its outputs through the ADDAC207.
VC Transition makes for an awesome state transition controller. Plug its outputs to various CV controller parameters of your audio effects modules. Set the slider to position A, and set the minimum values for each channel. Then move the slider to position B and set the SPAN settings for each channel. Use the TRANSITION CONTROLLER slider to morph from state A to state B and backwards. Flip the DIRECTION switches to change the direction of the transition for each channel. Use the CV IN to automate the transition using LFOs, ADSRs or sequencers.
Plug the output of your ADSR envelope to the CV IN and set the channels differently to get 5 different ADSRs from one common source.


This module was developed based on an initial idea by Konstantine Fioretos.
Read more
MRP:$134.79
coming soon $130.85
FORTHCOMING
ADDAC System ADDAC305 Manual Latches Module (red faceplate) ADDAC System ADDAC305 Manual Latches Module (red faceplate)
Notes: The ADDAC305 Manual Latches is a combination of 8 manual latching switches in a small and elegant module: each button toggles between Gate high / Gate low when pressed, outputting a 5V gate signal. Additionally 4 of the 8 available latches, sport inputs and can act as manual latching switches, allowing the incoming signal to pass to the output when the button is toggled.

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
Gate outputs: 0 +5v

ELECTRICAL:
Max current: 10mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$107.31
coming soon $103.59
FORTHCOMING
ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate) ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate)
Notes: The ADDAC501B expansion is connected directly to the ADDAC501 Complex Random. It extends functionality by adding gate outputs to the random generators.

If ADDAC501 generates a new random above the average between Minimum and Maximum, then the respective gate on ADDAC501B is triggered.

There are three pairs of gates, corresponding to the respective outputs on ADDAC501. Each gate pair has both positive and inverted outputs.

This expansion module also offers a dedicated knob for gliding effects. With it you can have a voltage ramp between two consecutive random numbers- randomized "legato" expressiveness.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 5 cm

Control Voltage I/O:
. Gate outputs: 0 - 5v

Electrical:
. Connects directly to ADDAC501
. Max current: 20mA
Read more
MRP:$134.79
coming soon $130.85
FORTHCOMING
ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate) ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate)
Notes: The Phono Pre Amplifier module- connect your turntable to it and bring it's sound straight into any of your patches.

Specs:
. Width: 4 HP
. Depth: 4.5 cm
. Current: 40mA
Read more
MRP:$134.79
coming soon $130.85
FORTHCOMING
ADDAC System ADDAC812VU Module (black faceplate)
Notes: Stereo/dual VU metering module with buffered thru outputs for each channel.

An additional switch turns the beautiful lamps behind the VU meters off, in case your rack is running low on power!

A couple trimmers on the back of the module allows the user to define the VU range of each channel independently.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3.5 cm

Electrical:
. Max current with lamps on: +100mA/-10mA
. Max current with lamps off: +10mA/-10mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$146.56
coming soon $141.76
FORTHCOMING
ADDAC System ADDAC801 Simple Mixer Module (red faceplate) ADDAC System ADDAC801 Simple Mixer Module (red faceplate)
Notes: This module allows you to mix up to three input signals, either audio or control voltages.

Each of the inputs has a dedicated amplitude knob to control the channel volume.

Two mix outputs are available, a standard out and a secondary output with phase selection.

A jumper on the board allows the user to change the phase of the second output to be normal or inverted.


Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 2.5 cm

Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$134.79
coming soon $130.85
FORTHCOMING
ADDAC System ADDAC602 Passive Ring Modulator Module (red faceplate)
Notes: A dual channel classic Passive Ring Modulator, with transformers and germanium diodes.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 3.5 cm

Electrical:
. Passive
Read more
MRP:$134.79
coming soon $130.85
FORTHCOMING
ADDAC System ADDAC208 Comparator & Rectifiers Module (red faceplate)
Notes: A Comparator is an electronic circuit that compares two voltages and switches its output to indicate which is larger. The Comparator operates between -10 or +10V

The Output is always -10V if below Threshold and +10V if above Threshold.

A Rectifier is an electronic circuit that is used to transform AC signals to an equivalent DC signal while removing one of it's polarities, i.e. Positive rectification excludes negative signals and vice-versa.
Both sections can be used to change the shape of any waveform as well as its harmonic content.

FRONTPANEL:
1 Comparator Threshold Knob
1 Comparator Jack Output
2 Comparator Monitor Led1 Common Signal Jack Input
4 Rectificated Outputs

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$134.79
coming soon $129.76
FORTHCOMING
ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate) ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate)
Notes: The ADDAC111B EXPANSION allows the user to access the first 8 files (a to h) through a trigger.

Files do not play simultaneously, if several triggers happen at the same time top priority goes from top to bottom- meaning that if B E and F triggers are received at once the file that will be played is file B.

The expansion module should be plugged to the back of the Ultra .Wav Player module. There's no connection to the bus boards.

Specificaitons:
Mechanical:
Format: Eurorack
Width: 16 hp
Depth: 3 cm

Control voltage i/o:
CV inputs: i 5v
CV outputs: 0 +10v

Electrical:
Max current: 150ma
Compatible with +-12v and +-15v power supplies
Bus board cable: 8x2 idc (doepfer style) connect
Read more
MRP:$134.79
coming soon $129.76
FORTHCOMING
ADDAC System ADDAC216 Sum & Difference Module (black faceplate) ADDAC System ADDAC216 Sum & Difference Module (black faceplate)
Notes: There are two equal sections in this module labeled A and B.

This module is a peculiar type of mixer that instead of just summing two input signals (X & Y) it also allows the possibility to subtract the two signals.
It works both for audio and CV signals and hence the possibility to get the diference of two CVs or cancel the phase of two audio signals. The resulting signal, of sum or subtraction, is then routed through a switchable (on/off) full rectification circuit labeled: Absolute. After this the gain of the mixed signal goes through another attenuverter labeled: Amplitude to control the resulting signal gain which, being an attenuverter, also allows the possibility to invert the incoming signal. After the Amplitude comes an AC/DC coupling switch followed by an bipolar Offset knob.

Besides the normal output, there's also an inverted output for each of the A & B sections.

The outputs of section A & B are also summed and sent to the Average Output.

Using a single input, just the X or Y input, the module can also be used as a simple dual Attenuverter & Offset CV processor with full rectification and AC coupling options.

Average mix output of both sections.
Read more
MRP:$141.33
coming soon $136.30
Items 1 to 17 of 17 on page 1 of 1

Filter

Saved Searches
Save current search
Release Date
Featured
Close